mtd: rawnand: Reorder the nand_chip->options flags

These flags are in a strange order, reorder the list, add spaces when
it is relevant, pack definitions that are related.

There is no functional change.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-3-miquel.raynal@bootlin.com

1 files changed, 30 insertions, 27 deletions

diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 4b58de842340..e70fea67030b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -119,19 +119,24 @@ enum nand_ecc_algo {
 #define NAND_ECC_MAXIMIZE		BIT(1)
 
 /*
- * When using software implementation of Hamming, we can specify which byte
- * ordering should be used.
- */
-#define NAND_ECC_SOFT_HAMMING_SM_ORDER	BIT(2)
-
-/*
  * Option constants for bizarre disfunctionality and real
  * features.
  */
+
 /* Buswidth is 16 bit */
 #define NAND_BUSWIDTH_16	BIT(1)
+
+/*
+ * When using software implementation of Hamming, we can specify which byte
+ * ordering should be used.
+ */
+#define NAND_ECC_SOFT_HAMMING_SM_ORDER	BIT(2)
+
 /* Chip has cache program function */
 #define NAND_CACHEPRG		BIT(3)
+/* Options valid for Samsung large page devices */
+#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
+
 /*
  * Chip requires ready check on read (for auto-incremented sequential read).
  * True only for small page devices; large page devices do not support
@@ -150,6 +155,8 @@ enum nand_ecc_algo {
 
 /* Device supports subpage reads */
 #define NAND_SUBPAGE_READ	BIT(12)
+/* Macros to identify the above */
+#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
 
 /*
  * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
@@ -160,32 +167,12 @@ enum nand_ecc_algo {
 /* Device needs 3rd row address cycle */
 #define NAND_ROW_ADDR_3		BIT(14)
 
-/* Options valid for Samsung large page devices */
-#define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
-
-/* Macros to identify the above */
-#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
-
-/*
- * There are different places where the manufacturer stores the factory bad
- * block markers.
- *
- * Position within the block: Each of these pages needs to be checked for a
- * bad block marking pattern.
- */
-#define NAND_BBM_FIRSTPAGE	BIT(24)
-#define NAND_BBM_SECONDPAGE	BIT(25)
-#define NAND_BBM_LASTPAGE	BIT(26)
-
-/* Position within the OOB data of the page */
-#define NAND_BBM_POS_SMALL		5
-#define NAND_BBM_POS_LARGE		0
-
 /* Non chip related options */
 /* This option skips the bbt scan during initialization. */
 #define NAND_SKIP_BBTSCAN	BIT(16)
 /* Chip may not exist, so silence any errors in scan */
 #define NAND_SCAN_SILENT_NODEV	BIT(18)
+
 /*
  * Autodetect nand buswidth with readid/onfi.
  * This suppose the driver will configure the hardware in 8 bits mode
@@ -193,6 +180,7 @@ enum nand_ecc_algo {
  * before calling nand_scan_tail.
  */
 #define NAND_BUSWIDTH_AUTO      BIT(19)
+
 /*
  * This option could be defined by controller drivers to protect against
  * kmap'ed, vmalloc'ed highmem buffers being passed from upper layers
@@ -222,11 +210,26 @@ enum nand_ecc_algo {
  */
 #define NAND_KEEP_TIMINGS	BIT(23)
 
+/*
+ * There are different places where the manufacturer stores the factory bad
+ * block markers.
+ *
+ * Position within the block: Each of these pages needs to be checked for a
+ * bad block marking pattern.
+ */
+#define NAND_BBM_FIRSTPAGE	BIT(24)
+#define NAND_BBM_SECONDPAGE	BIT(25)
+#define NAND_BBM_LASTPAGE	BIT(26)
+
 /* Cell info constants */
 #define NAND_CI_CHIPNR_MSK	0x03
 #define NAND_CI_CELLTYPE_MSK	0x0C
 #define NAND_CI_CELLTYPE_SHIFT	2
 
+/* Position within the OOB data of the page */
+#define NAND_BBM_POS_SMALL		5
+#define NAND_BBM_POS_LARGE		0
+
 /**
  * struct nand_parameters - NAND generic parameters from the parameter page
  * @model: Model name