summaryrefslogtreecommitdiff
path: root/include/linux/serialP.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/serialP.h
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/serialP.h')
-rw-r--r--include/linux/serialP.h184
1 files changed, 184 insertions, 0 deletions
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
new file mode 100644
index 000000000000..2307f11d8a6b
--- /dev/null
+++ b/include/linux/serialP.h
@@ -0,0 +1,184 @@
+/*
+ * Private header file for the (dumb) serial driver
+ *
+ * Copyright (C) 1997 by Theodore Ts'o.
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ */
+
+#ifndef _LINUX_SERIALP_H
+#define _LINUX_SERIALP_H
+
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+#include <linux/version.h>
+#include <linux/config.h>
+#include <linux/termios.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/circ_buf.h>
+#include <linux/wait.h>
+
+struct serial_state {
+ int magic;
+ int baud_base;
+ unsigned long port;
+ int irq;
+ int flags;
+ int hub6;
+ int type;
+ int line;
+ int revision; /* Chip revision (950) */
+ int xmit_fifo_size;
+ int custom_divisor;
+ int count;
+ u8 *iomem_base;
+ u16 iomem_reg_shift;
+ unsigned short close_delay;
+ unsigned short closing_wait; /* time to wait before closing */
+ struct async_icount icount;
+ int io_type;
+ struct async_struct *info;
+ struct pci_dev *dev;
+};
+
+struct async_struct {
+ int magic;
+ unsigned long port;
+ int hub6;
+ int flags;
+ int xmit_fifo_size;
+ struct serial_state *state;
+ struct tty_struct *tty;
+ int read_status_mask;
+ int ignore_status_mask;
+ int timeout;
+ int quot;
+ int x_char; /* xon/xoff character */
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned short closing_wait2; /* obsolete */
+ int IER; /* Interrupt Enable Register */
+ int MCR; /* Modem control register */
+ int LCR; /* Line control register */
+ int ACR; /* 16950 Additional Control Reg. */
+ unsigned long event;
+ unsigned long last_active;
+ int line;
+ int blocked_open; /* # of blocked opens */
+ struct circ_buf xmit;
+ spinlock_t xmit_lock;
+ u8 *iomem_base;
+ u16 iomem_reg_shift;
+ int io_type;
+ struct work_struct work;
+ struct tasklet_struct tlet;
+#ifdef DECLARE_WAITQUEUE
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+ wait_queue_head_t delta_msr_wait;
+#else
+ struct wait_queue *open_wait;
+ struct wait_queue *close_wait;
+ struct wait_queue *delta_msr_wait;
+#endif
+ struct async_struct *next_port; /* For the linked list */
+ struct async_struct *prev_port;
+};
+
+#define CONFIGURED_SERIAL_PORT(info) ((info)->port || ((info)->iomem_base))
+
+#define SERIAL_MAGIC 0x5301
+#define SSTATE_MAGIC 0x5302
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at rs interrupt time.
+ */
+#define RS_EVENT_WRITE_WAKEUP 0
+
+/*
+ * Multiport serial configuration structure --- internal structure
+ */
+struct rs_multiport_struct {
+ int port1;
+ unsigned char mask1, match1;
+ int port2;
+ unsigned char mask2, match2;
+ int port3;
+ unsigned char mask3, match3;
+ int port4;
+ unsigned char mask4, match4;
+ int port_monitor;
+};
+
+#if defined(__alpha__) && !defined(CONFIG_PCI)
+/*
+ * Digital did something really horribly wrong with the OUT1 and OUT2
+ * lines on at least some ALPHA's. The failure mode is that if either
+ * is cleared, the machine locks up with endless interrupts.
+ *
+ * This is still used by arch/mips/au1000/common/serial.c for some weird
+ * reason (mips != alpha!)
+ */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1)
+#elif defined(CONFIG_SBC8560)
+/*
+ * WindRiver did something similarly broken on their SBC8560 board. The
+ * UART tristates its IRQ output while OUT2 is clear, but they pulled
+ * the interrupt line _up_ instead of down, so if we register the IRQ
+ * while the UART is in that state, we die in an IRQ storm. */
+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2)
+#else
+#define ALPHA_KLUDGE_MCR 0
+#endif
+
+/*
+ * Definitions for PCI support.
+ */
+#define SPCI_FL_BASE_MASK 0x0007
+#define SPCI_FL_BASE0 0x0000
+#define SPCI_FL_BASE1 0x0001
+#define SPCI_FL_BASE2 0x0002
+#define SPCI_FL_BASE3 0x0003
+#define SPCI_FL_BASE4 0x0004
+#define SPCI_FL_GET_BASE(x) (x & SPCI_FL_BASE_MASK)
+
+#define SPCI_FL_IRQ_MASK (0x0007 << 4)
+#define SPCI_FL_IRQBASE0 (0x0000 << 4)
+#define SPCI_FL_IRQBASE1 (0x0001 << 4)
+#define SPCI_FL_IRQBASE2 (0x0002 << 4)
+#define SPCI_FL_IRQBASE3 (0x0003 << 4)
+#define SPCI_FL_IRQBASE4 (0x0004 << 4)
+#define SPCI_FL_GET_IRQBASE(x) ((x & SPCI_FL_IRQ_MASK) >> 4)
+
+/* Use successive BARs (PCI base address registers),
+ else use offset into some specified BAR */
+#define SPCI_FL_BASE_TABLE 0x0100
+
+/* Use successive entries in the irq resource table */
+#define SPCI_FL_IRQ_TABLE 0x0200
+
+/* Use the irq resource table instead of dev->irq */
+#define SPCI_FL_IRQRESOURCE 0x0400
+
+/* Use the Base address register size to cap number of ports */
+#define SPCI_FL_REGION_SZ_CAP 0x0800
+
+/* Do not use irq sharing for this device */
+#define SPCI_FL_NO_SHIRQ 0x1000
+
+/* This is a PNP device */
+#define SPCI_FL_ISPNP 0x2000
+
+#define SPCI_FL_PNPDEFAULT (SPCI_FL_IRQRESOURCE|SPCI_FL_ISPNP)
+
+#endif /* _LINUX_SERIAL_H */