sfp: add phylink based SFP module support

Add support for SFP hotpluggable modules via phylink.  This supports
both copper and optical SFP modules, which require different Serdes
modes in order to properly negotiate the link.

Optical SFP modules typically require the Serdes link to be talking
1000base-X mode - this is the gigabit ethernet mode defined by the
802.3 standard.

Copper SFP modules typically integrate a PHY in the module to convert
from Serdes to copper, and the PHY will be configured by the vendor
to either present a 1000base-X Serdes link (for fixed 1000base-T) or
a SGMII Serdes link.  However, this is vendor defined, so we instead
detect the PHY, switch the link to SGMII mode, and use traditional
PHY based negotiation.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

- set port and port capability depending on connector type
- move autoneg mode setting to probe function
- set "supported" speed capabilities depending on reported ethernet
  capabilities
- checks for short read
- dump eeprom base ID when checksum fails

1 files changed, 344 insertions, 0 deletions

diff --git a/include/linux/sfp.h b/include/linux/sfp.h
new file mode 100644
index 000000000000..b5ca85c3ac34
--- /dev/null
+++ b/include/linux/sfp.h
@@ -0,0 +1,344 @@
+#ifndef LINUX_SFP_H
+#define LINUX_SFP_H
+
+struct __packed sfp_eeprom_base {
+	u8 phys_id;
+	u8 phys_ext_id;
+	u8 connector;
+#if defined __BIG_ENDIAN_BITFIELD
+	u8 e10g_base_er:1;
+	u8 e10g_base_lrm:1;
+	u8 e10g_base_lr:1;
+	u8 e10g_base_sr:1;
+	u8 if_1x_sx:1;
+	u8 if_1x_lx:1;
+	u8 if_1x_copper_active:1;
+	u8 if_1x_copper_passive:1;
+
+	u8 escon_mmf_1310_led:1;
+	u8 escon_smf_1310_laser:1;
+	u8 sonet_oc192_short_reach:1;
+	u8 sonet_reach_bit1:1;
+	u8 sonet_reach_bit2:1;
+	u8 sonet_oc48_long_reach:1;
+	u8 sonet_oc48_intermediate_reach:1;
+	u8 sonet_oc48_short_reach:1;
+
+	u8 unallocated_5_7:1;
+	u8 sonet_oc12_smf_long_reach:1;
+	u8 sonet_oc12_smf_intermediate_reach:1;
+	u8 sonet_oc12_short_reach:1;
+	u8 unallocated_5_3:1;
+	u8 sonet_oc3_smf_long_reach:1;
+	u8 sonet_oc3_smf_intermediate_reach:1;
+	u8 sonet_oc3_short_reach:1;
+
+	u8 e_base_px:1;
+	u8 e_base_bx10:1;
+	u8 e100_base_fx:1;
+	u8 e100_base_lx:1;
+	u8 e1000_base_t:1;
+	u8 e1000_base_cx:1;
+	u8 e1000_base_lx:1;
+	u8 e1000_base_sx:1;
+
+	u8 fc_ll_v:1;
+	u8 fc_ll_s:1;
+	u8 fc_ll_i:1;
+	u8 fc_ll_l:1;
+	u8 fc_ll_m:1;
+	u8 fc_tech_sa:1;
+	u8 fc_tech_lc:1;
+	u8 fc_tech_electrical_inter_enclosure:1;
+
+	u8 fc_tech_electrical_intra_enclosure:1;
+	u8 fc_tech_sn:1;
+	u8 fc_tech_sl:1;
+	u8 fc_tech_ll:1;
+	u8 sfp_ct_active:1;
+	u8 sfp_ct_passive:1;
+	u8 unallocated_8_1:1;
+	u8 unallocated_8_0:1;
+
+	u8 fc_media_tw:1;
+	u8 fc_media_tp:1;
+	u8 fc_media_mi:1;
+	u8 fc_media_tv:1;
+	u8 fc_media_m6:1;
+	u8 fc_media_m5:1;
+	u8 unallocated_9_1:1;
+	u8 fc_media_sm:1;
+
+	u8 fc_speed_1200:1;
+	u8 fc_speed_800:1;
+	u8 fc_speed_1600:1;
+	u8 fc_speed_400:1;
+	u8 fc_speed_3200:1;
+	u8 fc_speed_200:1;
+	u8 unallocated_10_1:1;
+	u8 fc_speed_100:1;
+#elif defined __LITTLE_ENDIAN_BITFIELD
+	u8 if_1x_copper_passive:1;
+	u8 if_1x_copper_active:1;
+	u8 if_1x_lx:1;
+	u8 if_1x_sx:1;
+	u8 e10g_base_sr:1;
+	u8 e10g_base_lr:1;
+	u8 e10g_base_lrm:1;
+	u8 e10g_base_er:1;
+
+	u8 sonet_oc3_short_reach:1;
+	u8 sonet_oc3_smf_intermediate_reach:1;
+	u8 sonet_oc3_smf_long_reach:1;
+	u8 unallocated_5_3:1;
+	u8 sonet_oc12_short_reach:1;
+	u8 sonet_oc12_smf_intermediate_reach:1;
+	u8 sonet_oc12_smf_long_reach:1;
+	u8 unallocated_5_7:1;
+
+	u8 sonet_oc48_short_reach:1;
+	u8 sonet_oc48_intermediate_reach:1;
+	u8 sonet_oc48_long_reach:1;
+	u8 sonet_reach_bit2:1;
+	u8 sonet_reach_bit1:1;
+	u8 sonet_oc192_short_reach:1;
+	u8 escon_smf_1310_laser:1;
+	u8 escon_mmf_1310_led:1;
+
+	u8 e1000_base_sx:1;
+	u8 e1000_base_lx:1;
+	u8 e1000_base_cx:1;
+	u8 e1000_base_t:1;
+	u8 e100_base_lx:1;
+	u8 e100_base_fx:1;
+	u8 e_base_bx10:1;
+	u8 e_base_px:1;
+
+	u8 fc_tech_electrical_inter_enclosure:1;
+	u8 fc_tech_lc:1;
+	u8 fc_tech_sa:1;
+	u8 fc_ll_m:1;
+	u8 fc_ll_l:1;
+	u8 fc_ll_i:1;
+	u8 fc_ll_s:1;
+	u8 fc_ll_v:1;
+
+	u8 unallocated_8_0:1;
+	u8 unallocated_8_1:1;
+	u8 sfp_ct_passive:1;
+	u8 sfp_ct_active:1;
+	u8 fc_tech_ll:1;
+	u8 fc_tech_sl:1;
+	u8 fc_tech_sn:1;
+	u8 fc_tech_electrical_intra_enclosure:1;
+
+	u8 fc_media_sm:1;
+	u8 unallocated_9_1:1;
+	u8 fc_media_m5:1;
+	u8 fc_media_m6:1;
+	u8 fc_media_tv:1;
+	u8 fc_media_mi:1;
+	u8 fc_media_tp:1;
+	u8 fc_media_tw:1;
+
+	u8 fc_speed_100:1;
+	u8 unallocated_10_1:1;
+	u8 fc_speed_200:1;
+	u8 fc_speed_3200:1;
+	u8 fc_speed_400:1;
+	u8 fc_speed_1600:1;
+	u8 fc_speed_800:1;
+	u8 fc_speed_1200:1;
+#else
+#error Unknown Endian
+#endif
+	u8 encoding;
+	u8 br_nominal;
+	u8 rate_id;
+	u8 link_len[6];
+	char vendor_name[16];
+	u8 reserved36;
+	char vendor_oui[3];
+	char vendor_pn[16];
+	char vendor_rev[4];
+	union {
+		__be16 optical_wavelength;
+		u8 cable_spec;
+	};
+	u8 reserved62;
+	u8 cc_base;
+};
+
+struct __packed sfp_eeprom_ext {
+	__be16 options;
+	u8 br_max;
+	u8 br_min;
+	char vendor_sn[16];
+	char datecode[8];
+	u8 diagmon;
+	u8 enhopts;
+	u8 sff8472_compliance;
+	u8 cc_ext;
+};
+
+struct __packed sfp_eeprom_id {
+	struct sfp_eeprom_base base;
+	struct sfp_eeprom_ext ext;
+};
+
+/* SFP EEPROM registers */
+enum {
+	SFP_PHYS_ID			= 0x00,
+	SFP_PHYS_EXT_ID			= 0x01,
+	SFP_CONNECTOR			= 0x02,
+	SFP_COMPLIANCE			= 0x03,
+	SFP_ENCODING			= 0x0b,
+	SFP_BR_NOMINAL			= 0x0c,
+	SFP_RATE_ID			= 0x0d,
+	SFP_LINK_LEN_SM_KM		= 0x0e,
+	SFP_LINK_LEN_SM_100M		= 0x0f,
+	SFP_LINK_LEN_50UM_OM2_10M	= 0x10,
+	SFP_LINK_LEN_62_5UM_OM1_10M	= 0x11,
+	SFP_LINK_LEN_COPPER_1M		= 0x12,
+	SFP_LINK_LEN_50UM_OM4_10M	= 0x12,
+	SFP_LINK_LEN_50UM_OM3_10M	= 0x13,
+	SFP_VENDOR_NAME			= 0x14,
+	SFP_VENDOR_OUI			= 0x25,
+	SFP_VENDOR_PN			= 0x28,
+	SFP_VENDOR_REV			= 0x38,
+	SFP_OPTICAL_WAVELENGTH_MSB	= 0x3c,
+	SFP_OPTICAL_WAVELENGTH_LSB	= 0x3d,
+	SFP_CABLE_SPEC			= 0x3c,
+	SFP_CC_BASE			= 0x3f,
+	SFP_OPTIONS			= 0x40,	/* 2 bytes, MSB, LSB */
+	SFP_BR_MAX			= 0x42,
+	SFP_BR_MIN			= 0x43,
+	SFP_VENDOR_SN			= 0x44,
+	SFP_DATECODE			= 0x54,
+	SFP_DIAGMON			= 0x5c,
+	SFP_ENHOPTS			= 0x5d,
+	SFP_SFF8472_COMPLIANCE		= 0x5e,
+	SFP_CC_EXT			= 0x5f,
+
+	SFP_PHYS_ID_SFP			= 0x03,
+	SFP_PHYS_EXT_ID_SFP		= 0x04,
+	SFP_CONNECTOR_UNSPEC		= 0x00,
+	/* codes 01-05 not supportable on SFP, but some modules have single SC */
+	SFP_CONNECTOR_SC		= 0x01,
+	SFP_CONNECTOR_FIBERJACK		= 0x06,
+	SFP_CONNECTOR_LC		= 0x07,
+	SFP_CONNECTOR_MT_RJ		= 0x08,
+	SFP_CONNECTOR_MU		= 0x09,
+	SFP_CONNECTOR_SG		= 0x0a,
+	SFP_CONNECTOR_OPTICAL_PIGTAIL	= 0x0b,
+	SFP_CONNECTOR_MPO_1X12		= 0x0c,
+	SFP_CONNECTOR_MPO_2X16		= 0x0d,
+	SFP_CONNECTOR_HSSDC_II		= 0x20,
+	SFP_CONNECTOR_COPPER_PIGTAIL	= 0x21,
+	SFP_CONNECTOR_RJ45		= 0x22,
+	SFP_CONNECTOR_NOSEPARATE	= 0x23,
+	SFP_CONNECTOR_MXC_2X16		= 0x24,
+	SFP_ENCODING_UNSPEC		= 0x00,
+	SFP_ENCODING_8B10B		= 0x01,
+	SFP_ENCODING_4B5B		= 0x02,
+	SFP_ENCODING_NRZ		= 0x03,
+	SFP_ENCODING_MANCHESTER		= 0x04,
+	SFP_OPTIONS_HIGH_POWER_LEVEL	= BIT(13),
+	SFP_OPTIONS_PAGING_A2		= BIT(12),
+	SFP_OPTIONS_RETIMER		= BIT(11),
+	SFP_OPTIONS_COOLED_XCVR		= BIT(10),
+	SFP_OPTIONS_POWER_DECL		= BIT(9),
+	SFP_OPTIONS_RX_LINEAR_OUT	= BIT(8),
+	SFP_OPTIONS_RX_DECISION_THRESH	= BIT(7),
+	SFP_OPTIONS_TUNABLE_TX		= BIT(6),
+	SFP_OPTIONS_RATE_SELECT		= BIT(5),
+	SFP_OPTIONS_TX_DISABLE		= BIT(4),
+	SFP_OPTIONS_TX_FAULT		= BIT(3),
+	SFP_OPTIONS_LOS_INVERTED	= BIT(2),
+	SFP_OPTIONS_LOS_NORMAL		= BIT(1),
+	SFP_DIAGMON_DDM			= BIT(6),
+	SFP_DIAGMON_INT_CAL		= BIT(5),
+	SFP_DIAGMON_EXT_CAL		= BIT(4),
+	SFP_DIAGMON_RXPWR_AVG		= BIT(3),
+	SFP_DIAGMON_ADDRMODE		= BIT(2),
+	SFP_ENHOPTS_ALARMWARN		= BIT(7),
+	SFP_ENHOPTS_SOFT_TX_DISABLE	= BIT(6),
+	SFP_ENHOPTS_SOFT_TX_FAULT	= BIT(5),
+	SFP_ENHOPTS_SOFT_RX_LOS		= BIT(4),
+	SFP_ENHOPTS_SOFT_RATE_SELECT	= BIT(3),
+	SFP_ENHOPTS_APP_SELECT_SFF8079	= BIT(2),
+	SFP_ENHOPTS_SOFT_RATE_SFF8431	= BIT(1),
+	SFP_SFF8472_COMPLIANCE_NONE	= 0x00,
+	SFP_SFF8472_COMPLIANCE_REV9_3	= 0x01,
+	SFP_SFF8472_COMPLIANCE_REV9_5	= 0x02,
+	SFP_SFF8472_COMPLIANCE_REV10_2	= 0x03,
+	SFP_SFF8472_COMPLIANCE_REV10_4	= 0x04,
+	SFP_SFF8472_COMPLIANCE_REV11_0	= 0x05,
+	SFP_SFF8472_COMPLIANCE_REV11_3	= 0x06,
+	SFP_SFF8472_COMPLIANCE_REV11_4	= 0x07,
+	SFP_SFF8472_COMPLIANCE_REV12_0	= 0x08,
+};
+
+/* SFP Diagnostics */
+enum {
+	/* Alarm and warnings stored MSB at lower address then LSB */
+	SFP_TEMP_HIGH_ALARM		= 0x00,
+	SFP_TEMP_LOW_ALARM		= 0x02,
+	SFP_TEMP_HIGH_WARN		= 0x04,
+	SFP_TEMP_LOW_WARN		= 0x06,
+	SFP_VOLT_HIGH_ALARM		= 0x08,
+	SFP_VOLT_LOW_ALARM		= 0x0a,
+	SFP_VOLT_HIGH_WARN		= 0x0c,
+	SFP_VOLT_LOW_WARN		= 0x0e,
+	SFP_BIAS_HIGH_ALARM		= 0x10,
+	SFP_BIAS_LOW_ALARM		= 0x12,
+	SFP_BIAS_HIGH_WARN		= 0x14,
+	SFP_BIAS_LOW_WARN		= 0x16,
+	SFP_TXPWR_HIGH_ALARM		= 0x18,
+	SFP_TXPWR_LOW_ALARM		= 0x1a,
+	SFP_TXPWR_HIGH_WARN		= 0x1c,
+	SFP_TXPWR_LOW_WARN		= 0x1e,
+	SFP_RXPWR_HIGH_ALARM		= 0x20,
+	SFP_RXPWR_LOW_ALARM		= 0x22,
+	SFP_RXPWR_HIGH_WARN		= 0x24,
+	SFP_RXPWR_LOW_WARN		= 0x26,
+	SFP_LASER_TEMP_HIGH_ALARM	= 0x28,
+	SFP_LASER_TEMP_LOW_ALARM	= 0x2a,
+	SFP_LASER_TEMP_HIGH_WARN	= 0x2c,
+	SFP_LASER_TEMP_LOW_WARN		= 0x2e,
+	SFP_TEC_CUR_HIGH_ALARM		= 0x30,
+	SFP_TEC_CUR_LOW_ALARM		= 0x32,
+	SFP_TEC_CUR_HIGH_WARN		= 0x34,
+	SFP_TEC_CUR_LOW_WARN		= 0x36,
+	SFP_CAL_RXPWR4			= 0x38,
+	SFP_CAL_RXPWR3			= 0x3c,
+	SFP_CAL_RXPWR2			= 0x40,
+	SFP_CAL_RXPWR1			= 0x44,
+	SFP_CAL_RXPWR0			= 0x48,
+	SFP_CAL_TXI_SLOPE		= 0x4c,
+	SFP_CAL_TXI_OFFSET		= 0x4e,
+	SFP_CAL_TXPWR_SLOPE		= 0x50,
+	SFP_CAL_TXPWR_OFFSET		= 0x52,
+	SFP_CAL_T_SLOPE			= 0x54,
+	SFP_CAL_T_OFFSET		= 0x56,
+	SFP_CAL_V_SLOPE			= 0x58,
+	SFP_CAL_V_OFFSET		= 0x5a,
+	SFP_CHKSUM			= 0x5f,
+
+	SFP_TEMP			= 0x60,
+	SFP_VCC				= 0x62,
+	SFP_TX_BIAS			= 0x64,
+	SFP_TX_POWER			= 0x66,
+	SFP_RX_POWER			= 0x68,
+	SFP_LASER_TEMP			= 0x6a,
+	SFP_TEC_CUR			= 0x6c,
+
+	SFP_STATUS			= 0x6e,
+	SFP_ALARM			= 0x70,
+
+	SFP_EXT_STATUS			= 0x76,
+	SFP_VSL				= 0x78,
+	SFP_PAGE			= 0x7f,
+};
+
+#endif