Merge tag 'v3.6-rc1' into staging/for_v3.6

Linux 3.6-rc1

* tag 'v3.6-rc1': (18733 commits)
  Linux 3.6-rc1
  mm: remove node_start_pfn checking in new WARN_ON for now
  ARM: mmp: add missing irqs.h
  arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs
  ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes
  libceph: fix crypto key null deref, memory leak
  ceph: simplify+fix atomic_open
  sh: explicitly include sh_dma.h in setup-sh7722.c
  um: Add arch/x86/um to MAINTAINERS
  um: pass siginfo to guest process
  um: fix ubd_file_size for read-only files
  md/dm-raid: DM_RAID should select MD_RAID10
  md/raid1: submit IO from originating thread instead of md thread.
  raid5: raid5d handle stripe in batch way
  raid5: make_request use batch stripe release
  um: pull interrupt_end() into userspace()
  um: split syscall_trace(), pass pt_regs to it
  um: switch UPT_SET_RETURN_VALUE and regs_return_value to pt_regs
  MIPS: Loongson 2: Sort out clock managment.
  locks: remove unused lm_release_private
  ...

1 files changed, 56 insertions, 1 deletions

diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 0dddc9e42b6b..b69bdb1e08b6 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -28,6 +28,51 @@
 
 #include <linux/platform_device.h>
 
+#define STMMAC_RX_COE_NONE	0
+#define STMMAC_RX_COE_TYPE1	1
+#define STMMAC_RX_COE_TYPE2	2
+
+/* Define the macros for CSR clock range parameters to be passed by
+ * platform code.
+ * This could also be configured at run time using CPU freq framework. */
+
+/* MDC Clock Selection define*/
+#define	STMMAC_CSR_60_100M	0x0	/* MDC = clk_scr_i/42 */
+#define	STMMAC_CSR_100_150M	0x1	/* MDC = clk_scr_i/62 */
+#define	STMMAC_CSR_20_35M	0x2	/* MDC = clk_scr_i/16 */
+#define	STMMAC_CSR_35_60M	0x3	/* MDC = clk_scr_i/26 */
+#define	STMMAC_CSR_150_250M	0x4	/* MDC = clk_scr_i/102 */
+#define	STMMAC_CSR_250_300M	0x5	/* MDC = clk_scr_i/122 */
+
+/* The MDC clock could be set higher than the IEEE 802.3
+ * specified frequency limit 0f 2.5 MHz, by programming a clock divider
+ * of value different than the above defined values. The resultant MDIO
+ * clock frequency of 12.5 MHz is applicable for the interfacing chips
+ * supporting higher MDC clocks.
+ * The MDC clock selection macros need to be defined for MDC clock rate
+ * of 12.5 MHz, corresponding to the following selection.
+ */
+#define STMMAC_CSR_I_4		0x8	/* clk_csr_i/4 */
+#define STMMAC_CSR_I_6		0x9	/* clk_csr_i/6 */
+#define STMMAC_CSR_I_8		0xA	/* clk_csr_i/8 */
+#define STMMAC_CSR_I_10		0xB	/* clk_csr_i/10 */
+#define STMMAC_CSR_I_12		0xC	/* clk_csr_i/12 */
+#define STMMAC_CSR_I_14		0xD	/* clk_csr_i/14 */
+#define STMMAC_CSR_I_16		0xE	/* clk_csr_i/16 */
+#define STMMAC_CSR_I_18		0xF	/* clk_csr_i/18 */
+
+/* AXI DMA Burst length suported */
+#define DMA_AXI_BLEN_4		(1 << 1)
+#define DMA_AXI_BLEN_8		(1 << 2)
+#define DMA_AXI_BLEN_16		(1 << 3)
+#define DMA_AXI_BLEN_32		(1 << 4)
+#define DMA_AXI_BLEN_64		(1 << 5)
+#define DMA_AXI_BLEN_128	(1 << 6)
+#define DMA_AXI_BLEN_256	(1 << 7)
+#define DMA_AXI_BLEN_ALL (DMA_AXI_BLEN_4 | DMA_AXI_BLEN_8 | DMA_AXI_BLEN_16 \
+			| DMA_AXI_BLEN_32 | DMA_AXI_BLEN_64 \
+			| DMA_AXI_BLEN_128 | DMA_AXI_BLEN_256)
+
 /* Platfrom data for platform device structure's platform_data field */
 
 struct stmmac_mdio_bus_data {
@@ -38,16 +83,25 @@ struct stmmac_mdio_bus_data {
 	int probed_phy_irq;
 };
 
+struct stmmac_dma_cfg {
+	int pbl;
+	int fixed_burst;
+	int mixed_burst;
+	int burst_len;
+};
+
 struct plat_stmmacenet_data {
+	char *phy_bus_name;
 	int bus_id;
 	int phy_addr;
 	int interface;
 	struct stmmac_mdio_bus_data *mdio_bus_data;
-	int pbl;
+	struct stmmac_dma_cfg *dma_cfg;
 	int clk_csr;
 	int has_gmac;
 	int enh_desc;
 	int tx_coe;
+	int rx_coe;
 	int bugged_jumbo;
 	int pmt;
 	int force_sf_dma_mode;
@@ -56,6 +110,7 @@ struct plat_stmmacenet_data {
 	int (*init)(struct platform_device *pdev);
 	void (*exit)(struct platform_device *pdev);
 	void *custom_cfg;
+	void *custom_data;
 	void *bsp_priv;
 };
 #endif