diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-20 15:28:57 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-20 15:28:57 -0800 |
| commit | ff0c7e18629b8bd64681313a88ce55e182c9fee6 (patch) | |
| tree | 70efa650f6458514e1d7e5e3f72cc8f87fc5cf2c /include/linux | |
| parent | 5b0ed5964928b0aaf0d644c17c886c7f5ea4bb3f (diff) | |
| parent | a1f925bc4fa899b3c0f2dcbc432d572c36e74e71 (diff) | |
Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
Diffstat (limited to 'include/linux')
43 files changed, 1 insertions, 2136 deletions
diff --git a/include/linux/amba/pl093.h b/include/linux/amba/pl093.h deleted file mode 100644 index b17166e3b49a..000000000000 --- a/include/linux/amba/pl093.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* linux/amba/pl093.h - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * AMBA PL093 SSMC (synchronous static memory controller) - * See DDI0236.pdf (r0p4) for more details -*/ - -#define SMB_BANK(x) ((x) * 0x20) /* each bank control set is 0x20 apart */ - -/* Offsets for SMBxxxxRy registers */ - -#define SMBIDCYR (0x00) -#define SMBWSTRDR (0x04) -#define SMBWSTWRR (0x08) -#define SMBWSTOENR (0x0C) -#define SMBWSTWENR (0x10) -#define SMBCR (0x14) -#define SMBSR (0x18) -#define SMBWSTBRDR (0x1C) - -/* Masks for SMB registers */ -#define IDCY_MASK (0xf) -#define WSTRD_MASK (0xf) -#define WSTWR_MASK (0xf) -#define WSTOEN_MASK (0xf) -#define WSTWEN_MASK (0xf) - -/* Notes from datasheet: - * WSTOEN <= WSTRD - * WSTWEN <= WSTWR - * - * WSTOEN is not used with nWAIT - */ - -/* SMBCR bit definitions */ -#define SMBCR_BIWRITEEN (1 << 21) -#define SMBCR_ADDRVALIDWRITEEN (1 << 20) -#define SMBCR_SYNCWRITE (1 << 17) -#define SMBCR_BMWRITE (1 << 16) -#define SMBCR_WRAPREAD (1 << 14) -#define SMBCR_BIREADEN (1 << 13) -#define SMBCR_ADDRVALIDREADEN (1 << 12) -#define SMBCR_SYNCREAD (1 << 9) -#define SMBCR_BMREAD (1 << 8) -#define SMBCR_SMBLSPOL (1 << 6) -#define SMBCR_WP (1 << 3) -#define SMBCR_WAITEN (1 << 2) -#define SMBCR_WAITPOL (1 << 1) -#define SMBCR_RBLE (1 << 0) - -#define SMBCR_BURSTLENWRITE_MASK (3 << 18) -#define SMBCR_BURSTLENWRITE_4 (0 << 18) -#define SMBCR_BURSTLENWRITE_8 (1 << 18) -#define SMBCR_BURSTLENWRITE_RESERVED (2 << 18) -#define SMBCR_BURSTLENWRITE_CONTINUOUS (3 << 18) - -#define SMBCR_BURSTLENREAD_MASK (3 << 10) -#define SMBCR_BURSTLENREAD_4 (0 << 10) -#define SMBCR_BURSTLENREAD_8 (1 << 10) -#define SMBCR_BURSTLENREAD_16 (2 << 10) -#define SMBCR_BURSTLENREAD_CONTINUOUS (3 << 10) - -#define SMBCR_MW_MASK (3 << 4) -#define SMBCR_MW_8BIT (0 << 4) -#define SMBCR_MW_16BIT (1 << 4) -#define SMBCR_MW_M32BIT (2 << 4) - -/* SSMC status registers */ -#define SSMCCSR (0x200) -#define SSMCCR (0x204) -#define SSMCITCR (0x208) -#define SSMCITIP (0x20C) -#define SSMCITIOP (0x210) diff --git a/include/linux/clk/davinci.h b/include/linux/clk/davinci.h index f6ebab6228c2..e1d37451e03f 100644 --- a/include/linux/clk/davinci.h +++ b/include/linux/clk/davinci.h @@ -19,14 +19,5 @@ int da830_pll_init(struct device *dev, void __iomem *base, struct regmap *cfgchi #ifdef CONFIG_ARCH_DAVINCI_DA850 int da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); #endif -#ifdef CONFIG_ARCH_DAVINCI_DM355 -int dm355_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); -int dm355_psc_init(struct device *dev, void __iomem *base); -#endif -#ifdef CONFIG_ARCH_DAVINCI_DM365 -int dm365_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); -int dm365_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip); -int dm365_psc_init(struct device *dev, void __iomem *base); -#endif #endif /* __LINUX_CLK_DAVINCI_PLL_H___ */ diff --git a/include/linux/clk/samsung.h b/include/linux/clk/samsung.h index 38b774001712..0cf7aac83439 100644 --- a/include/linux/clk/samsung.h +++ b/include/linux/clk/samsung.h @@ -21,36 +21,4 @@ static inline void s3c64xx_clk_init(struct device_node *np, bool s3c6400, void __iomem *base) { } #endif /* CONFIG_S3C64XX_COMMON_CLK */ -#ifdef CONFIG_S3C2410_COMMON_CLK -void s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f, - int current_soc, - void __iomem *reg_base); -#else -static inline void s3c2410_common_clk_init(struct device_node *np, - unsigned long xti_f, - int current_soc, - void __iomem *reg_base) { } -#endif /* CONFIG_S3C2410_COMMON_CLK */ - -#ifdef CONFIG_S3C2412_COMMON_CLK -void s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, - unsigned long ext_f, void __iomem *reg_base); -#else -static inline void s3c2412_common_clk_init(struct device_node *np, - unsigned long xti_f, - unsigned long ext_f, - void __iomem *reg_base) { } -#endif /* CONFIG_S3C2412_COMMON_CLK */ - -#ifdef CONFIG_S3C2443_COMMON_CLK -void s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, - int current_soc, - void __iomem *reg_base); -#else -static inline void s3c2443_common_clk_init(struct device_node *np, - unsigned long xti_f, - int current_soc, - void __iomem *reg_base) { } -#endif /* CONFIG_S3C2443_COMMON_CLK */ - #endif /* __LINUX_CLK_SAMSUNG_H_ */ diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h deleted file mode 100644 index 61e686dbaa74..000000000000 --- a/include/linux/mfd/asic3.h +++ /dev/null @@ -1,313 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * include/linux/mfd/asic3.h - * - * Compaq ASIC3 headers. - * - * Copyright 2001 Compaq Computer Corporation. - * Copyright 2007-2008 OpenedHand Ltd. - */ - -#ifndef __ASIC3_H__ -#define __ASIC3_H__ - -#include <linux/types.h> - -struct led_classdev; -struct asic3_led { - const char *name; - const char *default_trigger; - struct led_classdev *cdev; -}; - -struct asic3_platform_data { - u16 *gpio_config; - unsigned int gpio_config_num; - - unsigned int irq_base; - - unsigned int gpio_base; - - unsigned int clock_rate; - - struct asic3_led *leds; -}; - -#define ASIC3_NUM_GPIO_BANKS 4 -#define ASIC3_GPIOS_PER_BANK 16 -#define ASIC3_NUM_GPIOS 64 -#define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6 - -#define ASIC3_IRQ_LED0 64 -#define ASIC3_IRQ_LED1 65 -#define ASIC3_IRQ_LED2 66 -#define ASIC3_IRQ_SPI 67 -#define ASIC3_IRQ_SMBUS 68 -#define ASIC3_IRQ_OWM 69 - -#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio)) - -#define ASIC3_GPIO_BANK_A 0 -#define ASIC3_GPIO_BANK_B 1 -#define ASIC3_GPIO_BANK_C 2 -#define ASIC3_GPIO_BANK_D 3 - -#define ASIC3_GPIO(bank, gpio) \ - ((ASIC3_GPIOS_PER_BANK * ASIC3_GPIO_BANK_##bank) + (gpio)) -#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf)) -/* All offsets below are specified with this address bus shift */ -#define ASIC3_DEFAULT_ADDR_SHIFT 2 - -#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg) -#define ASIC3_GPIO_OFFSET(base, reg) \ - (ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg) - -#define ASIC3_GPIO_A_BASE 0x0000 -#define ASIC3_GPIO_B_BASE 0x0100 -#define ASIC3_GPIO_C_BASE 0x0200 -#define ASIC3_GPIO_D_BASE 0x0300 - -#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4) -#define ASIC3_GPIO_TO_BIT(gpio) ((gpio) - \ - (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4))) -#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio)) -#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100)) -#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100)) - -#define ASIC3_GPIO_MASK 0x00 /* R/W 0:don't mask */ -#define ASIC3_GPIO_DIRECTION 0x04 /* R/W 0:input */ -#define ASIC3_GPIO_OUT 0x08 /* R/W 0:output low */ -#define ASIC3_GPIO_TRIGGER_TYPE 0x0c /* R/W 0:level */ -#define ASIC3_GPIO_EDGE_TRIGGER 0x10 /* R/W 0:falling */ -#define ASIC3_GPIO_LEVEL_TRIGGER 0x14 /* R/W 0:low level detect */ -#define ASIC3_GPIO_SLEEP_MASK 0x18 /* R/W 0:don't mask in sleep mode */ -#define ASIC3_GPIO_SLEEP_OUT 0x1c /* R/W level 0:low in sleep mode */ -#define ASIC3_GPIO_BAT_FAULT_OUT 0x20 /* R/W level 0:low in batt_fault */ -#define ASIC3_GPIO_INT_STATUS 0x24 /* R/W 0:none, 1:detect */ -#define ASIC3_GPIO_ALT_FUNCTION 0x28 /* R/W 1:LED register control */ -#define ASIC3_GPIO_SLEEP_CONF 0x2c /* - * R/W bit 1: autosleep - * 0: disable gposlpout in normal mode, - * enable gposlpout in sleep mode. - */ -#define ASIC3_GPIO_STATUS 0x30 /* R Pin status */ - -/* - * ASIC3 GPIO config - * - * Bits 0..6 gpio number - * Bits 7..13 Alternate function - * Bit 14 Direction - * Bit 15 Initial value - * - */ -#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f) -#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7) -#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14) -#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15) -#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \ - | (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \ - | (((init) & 0x1) << 15)) -#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \ - ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init)) -#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \ - ASIC3_CONFIG_GPIO((gpio), 0, 1, (init)) - -/* - * Alternate functions - */ -#define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0) -#define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0) -#define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0) -#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 0, 0) -#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 0, 0) -#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 0, 0) -#define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0) -#define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0) -#define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0) -#define ASIC3_GPIOC5_SPI_CLK ASIC3_CONFIG_GPIO(37, 1, 1, 0) -#define ASIC3_GPIOC5_nCIOW ASIC3_CONFIG_GPIO(37, 1, 1, 0) -#define ASIC3_GPIOC6_nCIOR ASIC3_CONFIG_GPIO(38, 1, 1, 0) -#define ASIC3_GPIOC7_nPCE_1 ASIC3_CONFIG_GPIO(39, 1, 0, 0) -#define ASIC3_GPIOC8_nPCE_2 ASIC3_CONFIG_GPIO(40, 1, 0, 0) -#define ASIC3_GPIOC9_nPOE ASIC3_CONFIG_GPIO(41, 1, 0, 0) -#define ASIC3_GPIOC10_nPWE ASIC3_CONFIG_GPIO(42, 1, 0, 0) -#define ASIC3_GPIOC11_PSKTSEL ASIC3_CONFIG_GPIO(43, 1, 0, 0) -#define ASIC3_GPIOC12_nPREG ASIC3_CONFIG_GPIO(44, 1, 0, 0) -#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0) -#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0) -#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0) -#define ASIC3_GPIOD4_CF_nCD ASIC3_CONFIG_GPIO(52, 1, 0, 0) -#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0) -#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0) -#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0) - - -#define ASIC3_SPI_Base 0x0400 -#define ASIC3_SPI_Control 0x0000 -#define ASIC3_SPI_TxData 0x0004 -#define ASIC3_SPI_RxData 0x0008 -#define ASIC3_SPI_Int 0x000c -#define ASIC3_SPI_Status 0x0010 - -#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */ - -#define ASIC3_PWM_0_Base 0x0500 -#define ASIC3_PWM_1_Base 0x0600 -#define ASIC3_PWM_TimeBase 0x0000 -#define ASIC3_PWM_PeriodTime 0x0004 -#define ASIC3_PWM_DutyTime 0x0008 - -#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */ -#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */ - -#define ASIC3_NUM_LEDS 3 -#define ASIC3_LED_0_Base 0x0700 -#define ASIC3_LED_1_Base 0x0800 -#define ASIC3_LED_2_Base 0x0900 -#define ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */ -#define ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */ -#define ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */ -#define ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */ - -/* LED TimeBase bits - match ASIC2 */ -#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */ - /* Note: max = 5 on hx4700 */ - /* 0: maximum time base */ - /* 1: maximum time base / 2 */ - /* n: maximum time base / 2^n */ - -#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */ -#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */ -#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */ - -#define ASIC3_CLOCK_BASE 0x0A00 -#define ASIC3_CLOCK_CDEX 0x00 -#define ASIC3_CLOCK_SEL 0x04 - -#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */ -#define CLOCK_CDEX_SOURCE0 (1 << 0) -#define CLOCK_CDEX_SOURCE1 (1 << 1) -#define CLOCK_CDEX_SPI (1 << 2) -#define CLOCK_CDEX_OWM (1 << 3) -#define CLOCK_CDEX_PWM0 (1 << 4) -#define CLOCK_CDEX_PWM1 (1 << 5) -#define CLOCK_CDEX_LED0 (1 << 6) -#define CLOCK_CDEX_LED1 (1 << 7) -#define CLOCK_CDEX_LED2 (1 << 8) - -/* Clocks settings: 1 for 24.576 MHz, 0 for 12.288Mhz */ -#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source */ -#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source ctrl */ -#define CLOCK_CDEX_SMBUS (1 << 11) -#define CLOCK_CDEX_CONTROL_CX (1 << 12) - -#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */ -#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */ - -#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select */ -#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select */ - -/* R/W: INT clock source control (32.768 kHz) */ -#define CLOCK_SEL_CX (1 << 2) - - -#define ASIC3_INTR_BASE 0x0B00 - -#define ASIC3_INTR_INT_MASK 0x00 /* Interrupt mask control */ -#define ASIC3_INTR_P_INT_STAT 0x04 /* Peripheral interrupt status */ -#define ASIC3_INTR_INT_CPS 0x08 /* Interrupt timer clock pre-scale */ -#define ASIC3_INTR_INT_TBS 0x0c /* Interrupt timer set */ - -#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */ -#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */ -#define ASIC3_INTMASK_MASK0 (1 << 2) -#define ASIC3_INTMASK_MASK1 (1 << 3) -#define ASIC3_INTMASK_MASK2 (1 << 4) -#define ASIC3_INTMASK_MASK3 (1 << 5) -#define ASIC3_INTMASK_MASK4 (1 << 6) -#define ASIC3_INTMASK_MASK5 (1 << 7) - -#define ASIC3_INTR_PERIPHERAL_A (1 << 0) -#define ASIC3_INTR_PERIPHERAL_B (1 << 1) -#define ASIC3_INTR_PERIPHERAL_C (1 << 2) -#define ASIC3_INTR_PERIPHERAL_D (1 << 3) -#define ASIC3_INTR_LED0 (1 << 4) -#define ASIC3_INTR_LED1 (1 << 5) -#define ASIC3_INTR_LED2 (1 << 6) -#define ASIC3_INTR_SPI (1 << 7) -#define ASIC3_INTR_SMBUS (1 << 8) -#define ASIC3_INTR_OWM (1 << 9) - -#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */ -#define ASIC3_INTR_CPS_SET (1 << 4) /* Time base enable */ - - -/* Basic control of the SD ASIC */ -#define ASIC3_SDHWCTRL_BASE 0x0E00 -#define ASIC3_SDHWCTRL_SDCONF 0x00 - -#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */ -#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */ -#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */ -#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* SD card detection: 0:low */ - -/* SD card write protection: 0=high */ -#define ASIC3_SDHWCTRL_LEVWP (1 << 4) -#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 0=disable */ - -/* SD card power supply ctrl 1=enable */ -#define ASIC3_SDHWCTRL_SDPWR (1 << 6) - -#define ASIC3_EXTCF_BASE 0x1100 - -#define ASIC3_EXTCF_SELECT 0x00 -#define ASIC3_EXTCF_RESET 0x04 - -#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */ -#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */ -#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */ -#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */ -#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */ -#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* ?? used by OWM and CF */ -#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state */ -#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state */ -#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */ -#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */ -#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */ -#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */ -#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14) -#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */ - -/********************************************* - * The Onewire interface (DS1WM) is handled - * by the ds1wm driver. - * - *********************************************/ - -#define ASIC3_OWM_BASE 0xC00 - -/***************************************************************************** - * The SD configuration registers are at a completely different location - * in memory. They are divided into three sets of registers: - * - * SD_CONFIG Core configuration register - * SD_CTRL Control registers for SD operations - * SDIO_CTRL Control registers for SDIO operations - * - *****************************************************************************/ -#define ASIC3_SD_CONFIG_BASE 0x0400 /* Assumes 32 bit addressing */ -#define ASIC3_SD_CONFIG_SIZE 0x0200 /* Assumes 32 bit addressing */ -#define ASIC3_SD_CTRL_BASE 0x1000 -#define ASIC3_SDIO_CTRL_BASE 0x1200 - -#define ASIC3_MAP_SIZE_32BIT 0x2000 -#define ASIC3_MAP_SIZE_16BIT 0x1000 - -/* Functions needed by leds-asic3 */ - -struct asic3; -extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val); -extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg); - -#endif /* __ASIC3_H__ */ diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h deleted file mode 100644 index 3d3ed67bd969..000000000000 --- a/include/linux/mfd/htc-pasic3.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * HTC PASIC3 driver - LEDs and DS1WM - * - * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive for - * more details. - * - */ - -#ifndef __PASIC3_H -#define __PASIC3_H - -#include <linux/platform_device.h> -#include <linux/leds.h> - -extern void pasic3_write_register(struct device *dev, u32 reg, u8 val); -extern u8 pasic3_read_register(struct device *dev, u32 reg); - -/* - * mask for registers 0x20,0x21,0x22 - */ -#define PASIC3_MASK_LED0 0x04 -#define PASIC3_MASK_LED1 0x08 -#define PASIC3_MASK_LED2 0x40 - -/* - * bits in register 0x06 - */ -#define PASIC3_BIT2_LED0 0x08 -#define PASIC3_BIT2_LED1 0x10 -#define PASIC3_BIT2_LED2 0x20 - -struct pasic3_led { - struct led_classdev led; - unsigned int hw_num; - unsigned int bit2; - unsigned int mask; - struct pasic3_leds_machinfo *pdata; -}; - -struct pasic3_leds_machinfo { - unsigned int num_leds; - unsigned int power_gpio; - struct pasic3_led *leds; -}; - -struct pasic3_platform_data { - struct pasic3_leds_machinfo *led_pdata; - unsigned int clock_rate; -}; - -#endif diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h deleted file mode 100644 index ae3e7a5c5219..000000000000 --- a/include/linux/mfd/t7l66xb.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * This file contains the definitions for the T7L66XB - * - * (C) Copyright 2005 Ian Molton <spyro@f2s.com> - */ -#ifndef MFD_T7L66XB_H -#define MFD_T7L66XB_H - -#include <linux/mfd/core.h> -#include <linux/mfd/tmio.h> - -struct t7l66xb_platform_data { - int (*enable)(struct platform_device *dev); - int (*suspend)(struct platform_device *dev); - int (*resume)(struct platform_device *dev); - - int irq_base; /* The base for subdevice irqs */ - - struct tmio_nand_data *nand_data; -}; - - -#define IRQ_T7L66XB_MMC (1) -#define IRQ_T7L66XB_NAND (3) - -#define T7L66XB_NR_IRQS 8 - -#endif diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h deleted file mode 100644 index aacf1dcc86b9..000000000000 --- a/include/linux/mfd/tc6387xb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * This file contains the definitions for the TC6387XB - * - * (C) Copyright 2005 Ian Molton <spyro@f2s.com> - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - */ -#ifndef MFD_TC6387XB_H -#define MFD_TC6387XB_H - -struct tc6387xb_platform_data { - int (*enable)(struct platform_device *dev); - int (*suspend)(struct platform_device *dev); - int (*resume)(struct platform_device *dev); -}; - -#endif diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h deleted file mode 100644 index d17807f2d0c9..000000000000 --- a/include/linux/mfd/tc6393xb.h +++ /dev/null @@ -1,53 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Toshiba TC6393XB SoC support - * - * Copyright(c) 2005-2006 Chris Humbert - * Copyright(c) 2005 Dirk Opfer - * Copyright(c) 2005 Ian Molton <spyro@f2s.com> - * Copyright(c) 2007 Dmitry Baryshkov - * - * Based on code written by Sharp/Lineo for 2.4 kernels - * Based on locomo.c - */ - -#ifndef MFD_TC6393XB_H -#define MFD_TC6393XB_H - -#include <linux/fb.h> - -/* Also one should provide the CK3P6MI clock */ -struct tc6393xb_platform_data { - u16 scr_pll2cr; /* PLL2 Control */ - u16 scr_gper; /* GP Enable */ - - int (*enable)(struct platform_device *dev); - void (*disable)(struct platform_device *dev); - int (*suspend)(struct platform_device *dev); - int (*resume)(struct platform_device *dev); - - int irq_base; /* base for subdevice irqs */ - - struct tmio_nand_data *nand_data; - struct tmio_fb_data *fb_data; - - unsigned resume_restore : 1; /* make special actions - to preserve the state - on suspend/resume */ -}; - -extern int tc6393xb_lcd_mode(struct platform_device *fb, - const struct fb_videomode *mode); -extern int tc6393xb_lcd_set_power(struct platform_device *fb, bool on); - -/* - * Relative to irq_base - */ -#define IRQ_TC6393_NAND 0 -#define IRQ_TC6393_MMC 1 -#define IRQ_TC6393_OHCI 2 -#define IRQ_TC6393_FB 4 - -#define TC6393XB_NR_IRQS 8 - -#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index e8bf90281ba0..eace8ea6cda0 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -84,11 +84,6 @@ /* Some controllers have a CBSY bit */ #define TMIO_MMC_HAVE_CBSY BIT(11) -int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); -int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); -void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); -void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state); - struct dma_chan; /* diff --git a/include/linux/parport.h b/include/linux/parport.h index 1c16ffb8b908..a0bc9e0267b7 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -40,10 +40,6 @@ struct amiga_parport_state { unsigned char statusdir;/* ciab.ddrb & 7 */ }; -struct ax88796_parport_state { - unsigned char cpr; -}; - struct ip32_parport_state { unsigned int dcr; unsigned int ecr; @@ -55,7 +51,6 @@ struct parport_state { /* ARC has no state. */ struct ax_parport_state ax; struct amiga_parport_state amiga; - struct ax88796_parport_state ax88796; /* Atari has not state. */ struct ip32_parport_state ip32; void *misc; diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h deleted file mode 100644 index 2a69db4b60b7..000000000000 --- a/include/linux/pda_power.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Common power driver for PDAs and phones with one or two external - * power supplies (AC/USB) connected to main and backup batteries, - * and optional builtin charger. - * - * Copyright © 2007 Anton Vorontsov <cbou@mail.ru> - */ - -#ifndef __PDA_POWER_H__ -#define __PDA_POWER_H__ - -#define PDA_POWER_CHARGE_AC (1 << 0) -#define PDA_POWER_CHARGE_USB (1 << 1) - -struct device; - -struct pda_power_pdata { - int (*init)(struct device *dev); - int (*is_ac_online)(void); - int (*is_usb_online)(void); - void (*set_charge)(int flags); - void (*exit)(struct device *dev); - int (*suspend)(pm_message_t state); - int (*resume)(void); - - char **supplied_to; - size_t num_supplicants; - - unsigned int wait_for_status; /* msecs, default is 500 */ - unsigned int wait_for_charger; /* msecs, default is 500 */ - unsigned int polling_interval; /* msecs, default is 2000 */ - - unsigned long ac_max_uA; /* current to draw when on AC */ - - bool use_otg_notifier; -}; - -#endif /* __PDA_POWER_H__ */ diff --git a/include/linux/platform_data/asoc-palm27x.h b/include/linux/platform_data/asoc-palm27x.h deleted file mode 100644 index 22b69a393a57..000000000000 --- a/include/linux/platform_data/asoc-palm27x.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _INCLUDE_PALMASOC_H_ -#define _INCLUDE_PALMASOC_H_ - -struct palm27x_asoc_info { - int jack_gpio; -}; - -#endif diff --git a/include/linux/platform_data/asoc-poodle.h b/include/linux/platform_data/asoc-poodle.h deleted file mode 100644 index 2052fad55c5c..000000000000 --- a/include/linux/platform_data/asoc-poodle.h +++ /dev/null @@ -1,16 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_PLATFORM_DATA_POODLE_AUDIO -#define __LINUX_PLATFORM_DATA_POODLE_AUDIO - -/* locomo is not a proper gpio driver, and uses its own api */ -struct poodle_audio_platform_data { - struct device *locomo_dev; - - int gpio_amp_on; - int gpio_mute_l; - int gpio_mute_r; - int gpio_232vcc_on; - int gpio_jk_b; -}; - -#endif diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h deleted file mode 100644 index 1a7efc98d108..000000000000 --- a/include/linux/platform_data/asoc-s3c24xx_simtec.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Simtec Audio support. -*/ - -/** - * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio - * @use_mpllin: Select codec clock from MPLLin - * @output_cdclk: Need to output CDCLK to the codec - * @have_mic: Set if we have a MIC socket - * @have_lout: Set if we have a LineOut socket - * @amp_gpio: GPIO pin to enable the AMP - * @amp_gain: Option GPIO to control AMP gain - */ -struct s3c24xx_audio_simtec_pdata { - unsigned int use_mpllin:1; - unsigned int output_cdclk:1; - - unsigned int have_mic:1; - unsigned int have_lout:1; - - int amp_gpio; - int amp_gain[2]; - - void (*startup)(void); -}; diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h deleted file mode 100644 index fccf969dc4da..000000000000 --- a/include/linux/platform_data/ata-samsung_cf.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA platform_device info -*/ - -#ifndef __ATA_SAMSUNG_CF_H -#define __ATA_SAMSUNG_CF_H __FILE__ - -/** - * struct s3c_ide_platdata - S3C IDE driver platform data. - * @setup_gpio: Setup the external GPIO pins to the right state for data - * transfer in true-ide mode. - */ -struct s3c_ide_platdata { - void (*setup_gpio)(void); -}; - -/* - * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. - * @pdata: Platform data for IDE driver. - */ -extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); - -/* architecture-specific IDE configuration */ -extern void s3c64xx_ide_setup_gpio(void); -extern void s5pv210_ide_setup_gpio(void); - -#endif /*__ATA_SAMSUNG_CF_H */ diff --git a/include/linux/platform_data/clk-s3c2410.h b/include/linux/platform_data/clk-s3c2410.h deleted file mode 100644 index 7eb1cfa5409b..000000000000 --- a/include/linux/platform_data/clk-s3c2410.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2020 Krzysztof Kozlowski <krzk@kernel.org> - */ - -#ifndef __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ -#define __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ - -/** - * struct s3c2410_clk_platform_data - platform data for S3C2410 clock driver - * - * @modify_misccr: Function to modify the MISCCR and return the new value - */ -struct s3c2410_clk_platform_data { - unsigned int (*modify_misccr)(unsigned int clr, unsigned int chg); -}; - -#endif /* __LINUX_PLATFORM_DATA_CLK_S3C2410_H_ */ - diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h deleted file mode 100644 index 8bec5484dc86..000000000000 --- a/include/linux/platform_data/dma-mmp_tdma.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * SRAM Memory Management - * - * Copyright (c) 2011 Marvell Semiconductors Inc. - */ - -#ifndef __DMA_MMP_TDMA_H -#define __DMA_MMP_TDMA_H - -#include <linux/genalloc.h> - -/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ -#define SRAM_GRANULARITY 512 - -enum sram_type { - MMP_SRAM_UNDEFINED = 0, - MMP_ASRAM, - MMP_ISRAM, -}; - -struct sram_platdata { - char *pool_name; - int granularity; -}; - -#ifdef CONFIG_MMP_SRAM -extern struct gen_pool *sram_get_gpool(char *pool_name); -#else -static inline struct gen_pool *sram_get_gpool(char *pool_name) -{ - return NULL; -} -#endif - -#endif /* __DMA_MMP_TDMA_H */ diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h deleted file mode 100644 index 96d02dbeea67..000000000000 --- a/include/linux/platform_data/dma-s3c24xx.h +++ /dev/null @@ -1,48 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * S3C24XX DMA handling - * - * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> - */ - -/* Helper to encode the source selection constraints for early s3c socs. */ -#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) - -enum s3c24xx_dma_bus { - S3C24XX_DMA_APB, - S3C24XX_DMA_AHB, -}; - -/** - * @bus: on which bus does the peripheral reside - AHB or APB. - * @handshake: is a handshake with the peripheral necessary - * @chansel: channel selection information, depending on variant; reqsel for - * s3c2443 and later and channel-selection map for earlier SoCs - * see CHANSEL doc in s3c2443-dma.c - */ -struct s3c24xx_dma_channel { - enum s3c24xx_dma_bus bus; - bool handshake; - u16 chansel; -}; - -struct dma_slave_map; - -/** - * struct s3c24xx_dma_platdata - platform specific settings - * @num_phy_channels: number of physical channels - * @channels: array of virtual channel descriptions - * @num_channels: number of virtual channels - * @slave_map: dma slave map matching table - * @slavecnt: number of elements in slave_map - */ -struct s3c24xx_dma_platdata { - int num_phy_channels; - struct s3c24xx_dma_channel *channels; - int num_channels; - const struct dma_slave_map *slave_map; - int slavecnt; -}; - -struct dma_chan; -bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h deleted file mode 100644 index 10c11e6316d6..000000000000 --- a/include/linux/platform_data/fb-s3c2410.h +++ /dev/null @@ -1,99 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * Inspired by pxafb.h -*/ - -#ifndef __ASM_PLAT_FB_S3C2410_H -#define __ASM_PLAT_FB_S3C2410_H __FILE__ - -#include <linux/compiler_types.h> - -struct s3c2410fb_hw { - unsigned long lcdcon1; - unsigned long lcdcon2; - unsigned long lcdcon3; - unsigned long lcdcon4; - unsigned long lcdcon5; -}; - -/* LCD description */ -struct s3c2410fb_display { - /* LCD type */ - unsigned type; -#define S3C2410_LCDCON1_DSCAN4 (0<<5) -#define S3C2410_LCDCON1_STN4 (1<<5) -#define S3C2410_LCDCON1_STN8 (2<<5) -#define S3C2410_LCDCON1_TFT (3<<5) - -#define S3C2410_LCDCON1_TFT1BPP (8<<1) -#define S3C2410_LCDCON1_TFT2BPP (9<<1) -#define S3C2410_LCDCON1_TFT4BPP (10<<1) -#define S3C2410_LCDCON1_TFT8BPP (11<<1) -#define S3C2410_LCDCON1_TFT16BPP (12<<1) -#define S3C2410_LCDCON1_TFT24BPP (13<<1) - - /* Screen size */ - unsigned short width; - unsigned short height; - - /* Screen info */ - unsigned short xres; - unsigned short yres; - unsigned short bpp; - - unsigned pixclock; /* pixclock in picoseconds */ - unsigned short left_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short hsync_len; /* value in pixels (TFT) or HCLKs (STN) */ - unsigned short upper_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short lower_margin; /* value in lines (TFT) or 0 (STN) */ - unsigned short vsync_len; /* value in lines (TFT) or 0 (STN) */ - - /* lcd configuration registers */ - unsigned long lcdcon5; -#define S3C2410_LCDCON5_BPP24BL (1<<12) -#define S3C2410_LCDCON5_FRM565 (1<<11) -#define S3C2410_LCDCON5_INVVCLK (1<<10) -#define S3C2410_LCDCON5_INVVLINE (1<<9) -#define S3C2410_LCDCON5_INVVFRAME (1<<8) -#define S3C2410_LCDCON5_INVVD (1<<7) -#define S3C2410_LCDCON5_INVVDEN (1<<6) -#define S3C2410_LCDCON5_INVPWREN (1<<5) -#define S3C2410_LCDCON5_INVLEND (1<<4) -#define S3C2410_LCDCON5_PWREN (1<<3) -#define S3C2410_LCDCON5_ENLEND (1<<2) -#define S3C2410_LCDCON5_BSWP (1<<1) -#define S3C2410_LCDCON5_HWSWP (1<<0) -}; - -struct s3c2410fb_mach_info { - - struct s3c2410fb_display *displays; /* attached displays info */ - unsigned num_displays; /* number of defined displays */ - unsigned default_display; - - /* GPIOs */ - - unsigned long gpcup; - unsigned long gpcup_mask; - unsigned long gpccon; - unsigned long gpccon_mask; - unsigned long gpdup; - unsigned long gpdup_mask; - unsigned long gpdcon; - unsigned long gpdcon_mask; - - void __iomem * gpccon_reg; - void __iomem * gpcup_reg; - void __iomem * gpdcon_reg; - void __iomem * gpdup_reg; - - /* lpc3600 control register */ - unsigned long lpcsel; -}; - -extern void s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *); - -#endif /* __ASM_PLAT_FB_S3C2410_H */ diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h deleted file mode 100644 index bd35ddcf3068..000000000000 --- a/include/linux/platform_data/irda-pxaficp.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef ASMARM_ARCH_IRDA_H -#define ASMARM_ARCH_IRDA_H - -/* board specific transceiver capabilities */ - -#define IR_OFF 1 -#define IR_SIRMODE 2 -#define IR_FIRMODE 4 - -struct pxaficp_platform_data { - int transceiver_cap; - void (*transceiver_mode)(struct device *dev, int mode); - int (*startup)(struct device *dev); - void (*shutdown)(struct device *dev); - int gpio_pwdown; /* powerdown GPIO for the IrDA chip */ - bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */ -}; - -extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); - -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -void pxa2xx_transceiver_mode(struct device *dev, int mode); -#endif - -#endif diff --git a/include/linux/platform_data/irda-sa11x0.h b/include/linux/platform_data/irda-sa11x0.h deleted file mode 100644 index 7db59c917575..000000000000 --- a/include/linux/platform_data/irda-sa11x0.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/include/asm/mach/irda.h - * - * Copyright (C) 2004 Russell King. - */ -#ifndef __ASM_ARM_MACH_IRDA_H -#define __ASM_ARM_MACH_IRDA_H - -struct irda_platform_data { - int (*startup)(struct device *); - void (*shutdown)(struct device *); - int (*set_power)(struct device *, unsigned int state); - void (*set_speed)(struct device *, unsigned int speed); -}; - -#endif diff --git a/include/linux/platform_data/keyboard-pxa930_rotary.h b/include/linux/platform_data/keyboard-pxa930_rotary.h deleted file mode 100644 index 3271aa01cbe8..000000000000 --- a/include/linux/platform_data/keyboard-pxa930_rotary.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA930_ROTARY_H -#define __ASM_ARCH_PXA930_ROTARY_H - -/* NOTE: - * - * rotary can be either interpreted as a ralative input event (e.g. - * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN - * or LEFT/RIGHT), depending on if up_key & down_key are assigned - * or rel_code is assigned a non-zero value. When all are non-zero, - * up_key and down_key will be preferred. - */ -struct pxa930_rotary_platform_data { - int up_key; - int down_key; - int rel_code; -}; - -void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info); - -#endif /* __ASM_ARCH_PXA930_ROTARY_H */ diff --git a/include/linux/platform_data/leds-omap.h b/include/linux/platform_data/leds-omap.h deleted file mode 100644 index dd1a3ec86fe4..000000000000 --- a/include/linux/platform_data/leds-omap.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - */ -#ifndef ASMARM_ARCH_LED_H -#define ASMARM_ARCH_LED_H - -struct omap_led_config { - struct led_classdev cdev; - s16 gpio; -}; - -struct omap_led_platform_data { - s16 nr_leds; - struct omap_led_config *leds; -}; - -#endif diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h deleted file mode 100644 index 64f8d14876e0..000000000000 --- a/include/linux/platform_data/leds-s3c24xx.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2006 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - LEDs GPIO connector -*/ - -#ifndef __LEDS_S3C24XX_H -#define __LEDS_S3C24XX_H - -struct s3c24xx_led_platdata { - char *name; - char *def_trigger; -}; - -#endif /* __LEDS_S3C24XX_H */ diff --git a/include/linux/platform_data/media/s5p_hdmi.h b/include/linux/platform_data/media/s5p_hdmi.h deleted file mode 100644 index 457321e917b9..000000000000 --- a/include/linux/platform_data/media/s5p_hdmi.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Driver header for S5P HDMI chip. - * - * Copyright (c) 2011 Samsung Electronics, Co. Ltd - * Contact: Tomasz Stanislawski <t.stanislaws@samsung.com> - */ - -#ifndef S5P_HDMI_H -#define S5P_HDMI_H - -struct i2c_board_info; - -/** - * @hdmiphy_bus: controller id for HDMIPHY bus - * @hdmiphy_info: template for HDMIPHY I2C device - * @mhl_bus: controller id for MHL control bus - * @mhl_info: template for MHL I2C device - * @hpd_gpio: GPIO for Hot-Plug-Detect pin - * - * NULL pointer for *_info fields indicates that - * the corresponding chip is not present - */ -struct s5p_hdmi_platform_data { - int hdmiphy_bus; - struct i2c_board_info *hdmiphy_info; - int mhl_bus; - struct i2c_board_info *mhl_info; - int hpd_gpio; -}; - -#endif /* S5P_HDMI_H */ diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h deleted file mode 100644 index bacb86db3112..000000000000 --- a/include/linux/platform_data/mmc-s3cmci.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ARCH_MCI_H -#define _ARCH_MCI_H - -/** - * struct s3c24xx_mci_pdata - sd/mmc controller platform data - * @no_wprotect: Set this to indicate there is no write-protect switch. - * @no_detect: Set this if there is no detect switch. - * @wprotect_invert: Invert the default sense of the write protect switch. - * @use_dma: Set to allow the use of DMA. - * @gpio_detect: GPIO number for the card detect line. - * @gpio_wprotect: GPIO number for the write protect line. - * @ocr_avail: The mask of the available power states, non-zero to use. - * @set_power: Callback to control the power mode. - * - * The @gpio_detect is used for card detection when @no_wprotect is unset, - * and the default sense is that 0 returned from gpio_get_value() means - * that a card is inserted. If @detect_invert is set, then the value from - * gpio_get_value() is inverted, which makes 1 mean card inserted. - * - * The driver will use @gpio_wprotect to signal whether the card is write - * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() - * means the card is read/write, and 1 means read-only. The @wprotect_invert - * will invert the value returned from gpio_get_value(). - * - * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set - * to a non-zero value, otherwise the default of 3.2-3.4V is used. - */ -struct s3c24xx_mci_pdata { - unsigned int no_wprotect:1; - unsigned int no_detect:1; - unsigned int wprotect_invert:1; - unsigned int use_dma:1; - - unsigned long ocr_avail; - void (*set_power)(unsigned char power_mode, - unsigned short vdd); - struct gpio_desc *bus[6]; -}; - -/** - * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device - * @pdata: The platform data - * - * Copy the platform data supplied by @pdata so that this can be marked - * __initdata. - */ -extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd); -extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); - -#endif /* _ARCH_NCI_H */ diff --git a/include/linux/platform_data/mmp_audio.h b/include/linux/platform_data/mmp_audio.h deleted file mode 100644 index 83428d8ee18d..000000000000 --- a/include/linux/platform_data/mmp_audio.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MMP Platform AUDIO Management - * - * Copyright (c) 2011 Marvell Semiconductors Inc. - */ - -#ifndef MMP_AUDIO_H -#define MMP_AUDIO_H - -struct mmp_audio_platdata { - u32 period_max_capture; - u32 buffer_max_capture; - u32 period_max_playback; - u32 buffer_max_playback; -}; - -#endif /* MMP_AUDIO_H */ diff --git a/include/linux/platform_data/mouse-pxa930_trkball.h b/include/linux/platform_data/mouse-pxa930_trkball.h deleted file mode 100644 index ba0ac7a30d8c..000000000000 --- a/include/linux/platform_data/mouse-pxa930_trkball.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_PXA930_TRKBALL_H -#define __ASM_ARCH_PXA930_TRKBALL_H - -struct pxa930_trkball_platform_data { - int x_filter; - int y_filter; -}; - -#endif /* __ASM_ARCH_PXA930_TRKBALL_H */ - diff --git a/include/linux/platform_data/rtc-v3020.h b/include/linux/platform_data/rtc-v3020.h deleted file mode 100644 index e55d82cebf80..000000000000 --- a/include/linux/platform_data/rtc-v3020.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * v3020.h - Registers definition and platform data structure for the v3020 RTC. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006, 8D Technologies inc. - */ -#ifndef __LINUX_V3020_H -#define __LINUX_V3020_H - -/* The v3020 has only one data pin but which one - * is used depends on the board. */ -struct v3020_platform_data { - int leftshift; /* (1<<(leftshift)) & readl() */ - - unsigned int use_gpio:1; - unsigned int gpio_cs; - unsigned int gpio_wr; - unsigned int gpio_rd; - unsigned int gpio_io; -}; - -#define V3020_STATUS_0 0x00 -#define V3020_STATUS_1 0x01 -#define V3020_SECONDS 0x02 -#define V3020_MINUTES 0x03 -#define V3020_HOURS 0x04 -#define V3020_MONTH_DAY 0x05 -#define V3020_MONTH 0x06 -#define V3020_YEAR 0x07 -#define V3020_WEEK_DAY 0x08 -#define V3020_WEEK 0x09 - -#define V3020_IS_COMMAND(val) ((val)>=0x0E) - -#define V3020_CMD_RAM2CLOCK 0x0E -#define V3020_CMD_CLOCK2RAM 0x0F - -#endif /* __LINUX_V3020_H */ diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h deleted file mode 100644 index a170939832d5..000000000000 --- a/include/linux/platform_data/s3c-hsudc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * S3C24XX USB 2.0 High-speed USB controller gadget driver - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * The S3C24XX USB 2.0 high-speed USB controller supports upto 9 endpoints. - * Each endpoint can be configured as either in or out endpoint. Endpoints - * can be configured for Bulk or Interrupt transfer mode. -*/ - -#ifndef __LINUX_USB_S3C_HSUDC_H -#define __LINUX_USB_S3C_HSUDC_H - -/** - * s3c24xx_hsudc_platdata - Platform data for USB High-Speed gadget controller. - * @epnum: Number of endpoints to be instantiated by the controller driver. - * @gpio_init: Platform specific USB related GPIO initialization. - * @gpio_uninit: Platform specific USB releted GPIO uninitialzation. - * - * Representation of platform data for the S3C24XX USB 2.0 High Speed gadget - * controllers. - */ -struct s3c24xx_hsudc_platdata { - unsigned int epnum; - void (*gpio_init)(void); - void (*gpio_uninit)(void); - void (*phy_init)(void); - void (*phy_uninit)(void); -}; - -#endif /* __LINUX_USB_S3C_HSUDC_H */ diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h deleted file mode 100644 index 4d31a5cbdeb1..000000000000 --- a/include/linux/platform_data/usb-pxa3xx-ulpi.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * PXA3xx U2D header - * - * Copyright (C) 2010 CompuLab Ltd. - * - * Igor Grinberg <grinberg@compulab.co.il> - */ -#ifndef __PXA310_U2D__ -#define __PXA310_U2D__ - -#include <linux/usb/ulpi.h> - -struct pxa3xx_u2d_platform_data { - -#define ULPI_SER_6PIN (1 << 0) -#define ULPI_SER_3PIN (1 << 1) - unsigned int ulpi_mode; - - int (*init)(struct device *); - void (*exit)(struct device *); -}; - - -/* Start PXA3xx U2D host */ -int pxa3xx_u2d_start_hc(struct usb_bus *host); -/* Stop PXA3xx U2D host */ -void pxa3xx_u2d_stop_hc(struct usb_bus *host); - -extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info); - -#endif /* __PXA310_U2D__ */ diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h deleted file mode 100644 index c0fbe1fe3426..000000000000 --- a/include/linux/platform_data/usb-s3c2410_udc.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* arch/arm/plat-samsung/include/plat/udc.h - * - * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> - * - * Changelog: - * 14-Mar-2005 RTP Created file - * 02-Aug-2005 RTP File rename - * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum - * 18-Jan-2007 HMW Add per-platform vbus_draw function -*/ - -#ifndef __ASM_ARM_ARCH_UDC_H -#define __ASM_ARM_ARCH_UDC_H - -enum s3c2410_udc_cmd_e { - S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ - S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ - S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ -}; - -struct s3c2410_udc_mach_info { - void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); -}; - -extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); - -struct s3c24xx_hsudc_platdata; - -extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); - -#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/include/linux/s3c_adc_battery.h b/include/linux/s3c_adc_battery.h deleted file mode 100644 index 57f982c375f8..000000000000 --- a/include/linux/s3c_adc_battery.h +++ /dev/null @@ -1,39 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _S3C_ADC_BATTERY_H -#define _S3C_ADC_BATTERY_H - -struct s3c_adc_bat_thresh { - int volt; /* mV */ - int cur; /* mA */ - int level; /* percent */ -}; - -struct s3c_adc_bat_pdata { - int (*init)(void); - void (*exit)(void); - void (*enable_charger)(void); - void (*disable_charger)(void); - - const struct s3c_adc_bat_thresh *lut_noac; - unsigned int lut_noac_cnt; - const struct s3c_adc_bat_thresh *lut_acin; - unsigned int lut_acin_cnt; - - const unsigned int volt_channel; - const unsigned int current_channel; - const unsigned int backup_volt_channel; - - const unsigned int volt_samples; - const unsigned int current_samples; - const unsigned int backup_volt_samples; - - const unsigned int volt_mult; - const unsigned int current_mult; - const unsigned int backup_volt_mult; - const unsigned int internal_impedance; - - const unsigned int backup_volt_max; - const unsigned int backup_volt_min; -}; - -#endif diff --git a/include/linux/soc/mmp/cputype.h b/include/linux/soc/mmp/cputype.h index 221790761e8e..f13d127fadc4 100644 --- a/include/linux/soc/mmp/cputype.h +++ b/include/linux/soc/mmp/cputype.h @@ -26,29 +26,7 @@ extern unsigned int mmp_chip_id; -#ifdef CONFIG_CPU_PXA168 -static inline int cpu_is_pxa168(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - ((mmp_chip_id & 0xfff) == 0x168); -} -#else -#define cpu_is_pxa168() (0) -#endif - -/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ -#ifdef CONFIG_CPU_PXA910 -static inline int cpu_is_pxa910(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - (((mmp_chip_id & 0xfff) == 0x910) || - ((mmp_chip_id & 0xfff) == 0x920)); -} -#else -#define cpu_is_pxa910() (0) -#endif - -#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT) +#if defined(CONFIG_MACH_MMP2_DT) static inline int cpu_is_mmp2(void) { return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h deleted file mode 100644 index 591c94ef957d..000000000000 --- a/include/linux/soc/samsung/s3c-adc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C ADC driver information - */ - -#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H -#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__ - -struct s3c_adc_client; -struct platform_device; - -extern int s3c_adc_start(struct s3c_adc_client *client, - unsigned int channel, unsigned int nr_samples); - -extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); - -extern struct s3c_adc_client * - s3c_adc_register(struct platform_device *pdev, - void (*select)(struct s3c_adc_client *client, - unsigned selected), - void (*conv)(struct s3c_adc_client *client, - unsigned d0, unsigned d1, - unsigned *samples_left), - unsigned int is_ts); - -extern void s3c_adc_release(struct s3c_adc_client *client); - -#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */ diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h deleted file mode 100644 index 63e88fd5dea2..000000000000 --- a/include/linux/soc/samsung/s3c-cpu-freq.h +++ /dev/null @@ -1,145 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2006-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C CPU frequency scaling support - driver and board - */ -#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H -#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H - -#include <linux/cpufreq.h> - -struct s3c_cpufreq_info; -struct s3c_cpufreq_board; -struct s3c_iotimings; - -/** - * struct s3c_freq - frequency information (mainly for core drivers) - * @fclk: The FCLK frequency in Hz. - * @armclk: The ARMCLK frequency in Hz. - * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. - * @hclk: The HCLK frequency in Hz. - * @pclk: The PCLK frequency in Hz. - * - * This contains the frequency information about the current configuration - * mainly for the core drivers to ensure we do not end up passing about - * a large number of parameters. - * - * The @hclk_tns field is a useful cache for the parts of the drivers that - * need to calculate IO timings and suchlike. - */ -struct s3c_freq { - unsigned long fclk; - unsigned long armclk; - unsigned long hclk_tns; /* in 10ths of ns */ - unsigned long hclk; - unsigned long pclk; -}; - -/** - * struct s3c_cpufreq_freqs - s3c cpufreq notification information. - * @freqs: The cpufreq setting information. - * @old: The old clock settings. - * @new: The new clock settings. - * @pll_changing: Set if the PLL is changing. - * - * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the - * notification can use this information that is not provided by just - * having the core frequency alone. - * - * The pll_changing flag is used to indicate if the PLL itself is - * being set during this change. This is important as the clocks - * will temporarily be set to the XTAL clock during this time, so - * drivers may want to close down their output during this time. - * - * Note, this is not being used by any current drivers and therefore - * may be removed in the future. - */ -struct s3c_cpufreq_freqs { - struct cpufreq_freqs freqs; - struct s3c_freq old; - struct s3c_freq new; - - unsigned int pll_changing:1; -}; - -#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) - -/** - * struct s3c_clkdivs - clock divisor information - * @p_divisor: Divisor from FCLK to PCLK. - * @h_divisor: Divisor from FCLK to HCLK. - * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). - * @dvs: Non-zero if using DVS mode for ARMCLK. - * - * Divisor settings for the core clocks. - */ -struct s3c_clkdivs { - int p_divisor; - int h_divisor; - int arm_divisor; - unsigned char dvs; -}; - -#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) - -/** - * struct s3c_pllval - PLL value entry. - * @freq: The frequency for this entry in Hz. - * @pll_reg: The PLL register setting for this PLL value. - */ -struct s3c_pllval { - unsigned long freq; - unsigned long pll_reg; -}; - -/** - * struct s3c_cpufreq_board - per-board cpu frequency informatin - * @refresh: The SDRAM refresh period in nanoseconds. - * @auto_io: Set if the IO timing settings should be generated from the - * initialisation time hardware registers. - * @need_io: Set if the board has external IO on any of the chipselect - * lines that will require the hardware timing registers to be - * updated on a clock change. - * @max: The maxium frequency limits for the system. Any field that - * is left at zero will use the CPU's settings. - * - * This contains the board specific settings that affect how the CPU - * drivers chose settings. These include the memory refresh and IO - * timing information. - * - * Registration depends on the driver being used, the ARMCLK only - * implementation does not currently need this but the older style - * driver requires this to be available. - */ -struct s3c_cpufreq_board { - unsigned int refresh; - unsigned int auto_io:1; /* automatically init io timings. */ - unsigned int need_io:1; /* set if needs io timing support. */ - - /* any non-zero field in here is taken as an upper limit. */ - struct s3c_freq max; /* frequency limits */ -}; - -/* Things depending on frequency scaling. */ -#ifdef CONFIG_ARM_S3C_CPUFREQ -#define __init_or_cpufreq -#else -#define __init_or_cpufreq __init -#endif - -/* Board functions */ - -#ifdef CONFIG_ARM_S3C_CPUFREQ -extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); -#else - -static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - return 0; -} -#endif /* CONFIG_ARM_S3C_CPUFREQ */ - -#endif diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h deleted file mode 100644 index 3b278afb769b..000000000000 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ /dev/null @@ -1,299 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C CPU frequency scaling support - core support - */ -#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H -#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H - -#include <linux/soc/samsung/s3c-cpu-freq.h> - -struct seq_file; - -#define MAX_BANKS (8) -#define S3C2412_MAX_IO (8) - -/** - * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings - * @bankcon: The cached version of settings in this structure. - * @tacp: - * @tacs: Time from address valid to nCS asserted. - * @tcos: Time from nCS asserted to nOE or nWE asserted. - * @tacc: Time that nOE or nWE is asserted. - * @tcoh: Time nCS is held after nOE or nWE are released. - * @tcah: Time address is held for after - * @nwait_en: Whether nWAIT is enabled for this bank. - * - * This structure represents the IO timings for a S3C2410 style IO bank - * used by the CPU frequency support if it needs to change the settings - * of the IO. - */ -struct s3c2410_iobank_timing { - unsigned long bankcon; - unsigned int tacp; - unsigned int tacs; - unsigned int tcos; - unsigned int tacc; - unsigned int tcoh; /* nCS hold after nOE/nWE */ - unsigned int tcah; /* Address hold after nCS */ - unsigned char nwait_en; /* nWait enabled for bank. */ -}; - -/** - * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO - * @idcy: The idle cycle time between transactions. - * @wstrd: nCS release to end of read cycle. - * @wstwr: nCS release to end of write cycle. - * @wstoen: nCS assertion to nOE assertion time. - * @wstwen: nCS assertion to nWE assertion time. - * @wstbrd: Burst ready delay. - * @smbidcyr: Register cache for smbidcyr value. - * @smbwstrd: Register cache for smbwstrd value. - * @smbwstwr: Register cache for smbwstwr value. - * @smbwstoen: Register cache for smbwstoen value. - * @smbwstwen: Register cache for smbwstwen value. - * @smbwstbrd: Register cache for smbwstbrd value. - * - * Timing information for a IO bank on an S3C2412 or similar system which - * uses a PL093 block. - */ -struct s3c2412_iobank_timing { - unsigned int idcy; - unsigned int wstrd; - unsigned int wstwr; - unsigned int wstoen; - unsigned int wstwen; - unsigned int wstbrd; - - /* register cache */ - unsigned char smbidcyr; - unsigned char smbwstrd; - unsigned char smbwstwr; - unsigned char smbwstoen; - unsigned char smbwstwen; - unsigned char smbwstbrd; -}; - -union s3c_iobank { - struct s3c2410_iobank_timing *io_2410; - struct s3c2412_iobank_timing *io_2412; -}; - -/** - * struct s3c_iotimings - Chip IO timings holder - * @bank: The timings for each IO bank. - */ -struct s3c_iotimings { - union s3c_iobank bank[MAX_BANKS]; -}; - -/** - * struct s3c_plltab - PLL table information. - * @vals: List of PLL values. - * @size: Size of the PLL table @vals. - */ -struct s3c_plltab { - struct s3c_pllval *vals; - int size; -}; - -/** - * struct s3c_cpufreq_config - current cpu frequency configuration - * @freq: The current settings for the core clocks. - * @max: Maxium settings, derived from core, board and user settings. - * @pll: The PLL table entry for the current PLL settings. - * @divs: The divisor settings for the core clocks. - * @info: The current core driver information. - * @board: The information for the board we are running on. - * @lock_pll: Set if the PLL settings cannot be changed. - * - * This is for the core drivers that need to know information about - * the current settings and values. It should not be needed by any - * device drivers. -*/ -struct s3c_cpufreq_config { - struct s3c_freq freq; - struct s3c_freq max; - struct clk *mpll; - struct cpufreq_frequency_table pll; - struct s3c_clkdivs divs; - struct s3c_cpufreq_info *info; /* for core, not drivers */ - struct s3c_cpufreq_board *board; - - unsigned int lock_pll:1; -}; - -/** - * struct s3c_cpufreq_info - Information for the CPU frequency driver. - * @name: The name of this implementation. - * @max: The maximum frequencies for the system. - * @latency: Transition latency to give to cpufreq. - * @locktime_m: The lock-time in uS for the MPLL. - * @locktime_u: The lock-time in uS for the UPLL. - * @locttime_bits: The number of bits each LOCKTIME field. - * @need_pll: Set if this driver needs to change the PLL values to achieve - * any frequency changes. This is really only need by devices like the - * S3C2410 where there is no or limited divider between the PLL and the - * ARMCLK. - * @get_iotiming: Get the current IO timing data, mainly for use at start. - * @set_iotiming: Update the IO timings from the cached copies calculated - * from the @calc_iotiming entry when changing the frequency. - * @calc_iotiming: Calculate and update the cached copies of the IO timings - * from the newly calculated frequencies. - * @calc_freqtable: Calculate (fill in) the given frequency table from the - * current frequency configuration. If the table passed in is NULL, - * then the return is the number of elements to be filled for allocation - * of the table. - * @set_refresh: Set the memory refresh configuration. - * @set_fvco: Set the PLL frequencies. - * @set_divs: Update the clock divisors. - * @calc_divs: Calculate the clock divisors. - */ -struct s3c_cpufreq_info { - const char *name; - struct s3c_freq max; - - unsigned int latency; - - unsigned int locktime_m; - unsigned int locktime_u; - unsigned char locktime_bits; - - unsigned int need_pll:1; - - /* driver routines */ - - int (*get_iotiming)(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - - void (*set_iotiming)(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - - int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - - int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *t, - size_t table_size); - - void (*debug_io_show)(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - - void (*set_refresh)(struct s3c_cpufreq_config *cfg); - void (*set_fvco)(struct s3c_cpufreq_config *cfg); - void (*set_divs)(struct s3c_cpufreq_config *cfg); - int (*calc_divs)(struct s3c_cpufreq_config *cfg); -}; - -extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); - -extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no); - -/* exports and utilities for debugfs */ -extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); -extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS -#define s3c_cpufreq_debugfs_call(x) x -#else -#define s3c_cpufreq_debugfs_call(x) NULL -#endif - -/* Useful utility functions. */ - -extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); - -/* S3C2410 and compatible exported functions */ - -extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); -extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); - -#ifdef CONFIG_S3C2410_IOTIMING -extern void s3c2410_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - -extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); - -extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - -extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); -#else -#define s3c2410_iotiming_debugfs NULL -#define s3c2410_iotiming_calc NULL -#define s3c2410_iotiming_get NULL -#define s3c2410_iotiming_set NULL -#endif /* CONFIG_S3C2410_IOTIMING */ - -/* S3C2412 compatible routines */ - -#ifdef CONFIG_S3C2412_IOTIMING -extern void s3c2412_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - -extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - -extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); - -extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); -extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); -#else -#define s3c2412_iotiming_debugfs NULL -#define s3c2412_iotiming_calc NULL -#define s3c2412_iotiming_get NULL -#define s3c2412_iotiming_set NULL -#endif /* CONFIG_S3C2412_IOTIMING */ - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG -#define s3c_freq_dbg(x...) printk(KERN_INFO x) -#else -#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG -#define s3c_freq_iodbg(x...) printk(KERN_INFO x) -#else -#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ - -static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, - int index, size_t table_size, - unsigned int freq) -{ - if (index < 0) - return index; - - if (table) { - if (index >= table_size) - return -ENOMEM; - - s3c_freq_dbg("%s: { %d = %u kHz }\n", - __func__, index, freq); - - table[index].driver_data = index; - table[index].frequency = freq; - } - - return index + 1; -} - -u32 s3c2440_read_camdivn(void); -void s3c2440_write_camdivn(u32 camdiv); -u32 s3c24xx_read_clkdivn(void); -void s3c24xx_write_clkdivn(u32 clkdiv); -u32 s3c24xx_read_mpllcon(void); -void s3c24xx_write_locktime(u32 locktime); - -#endif diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h index f9164559c99f..5b23d85d20ab 100644 --- a/include/linux/soc/samsung/s3c-pm.h +++ b/include/linux/soc/samsung/s3c-pm.h @@ -14,58 +14,10 @@ /* PM debug functions */ -/** - * struct pm_uart_save - save block for core UART - * @ulcon: Save value for S3C2410_ULCON - * @ucon: Save value for S3C2410_UCON - * @ufcon: Save value for S3C2410_UFCON - * @umcon: Save value for S3C2410_UMCON - * @ubrdiv: Save value for S3C2410_UBRDIV - * - * Save block for UART registers to be held over sleep and restored if they - * are needed (say by debug). -*/ -struct pm_uart_save { - u32 ulcon; - u32 ucon; - u32 ufcon; - u32 umcon; - u32 ubrdiv; - u32 udivslot; -}; - -#ifdef CONFIG_SAMSUNG_PM_DEBUG -/** - * s3c_pm_dbg() - low level debug function for use in suspend/resume. - * @msg: The message to print. - * - * This function is used mainly to debug the resume process before the system - * can rely on printk/console output. It uses the low-level debugging output - * routine printascii() to do its work. - */ -extern void s3c_pm_dbg(const char *msg, ...); - -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) - -extern void s3c_pm_save_uarts(bool is_s3c24xx); -extern void s3c_pm_restore_uarts(bool is_s3c24xx); - -#ifdef CONFIG_ARCH_S3C64XX -extern void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save); -#else -static inline void -s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) -{ -} -#endif - -#else #define S3C_PMDBG(fmt...) pr_debug(fmt) static inline void s3c_pm_save_uarts(bool is_s3c24xx) { } static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { } -#endif /* suspend memory checking */ @@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void); #define s3c_pm_check_store() do { } while (0) #endif -/* system device subsystems */ - -extern struct bus_type s3c2410_subsys; -extern struct bus_type s3c2410a_subsys; -extern struct bus_type s3c2412_subsys; -extern struct bus_type s3c2416_subsys; -extern struct bus_type s3c2440_subsys; -extern struct bus_type s3c2442_subsys; -extern struct bus_type s3c2443_subsys; - #endif diff --git a/include/linux/soc/ti/omap1-soc.h b/include/linux/soc/ti/omap1-soc.h index 81008d400bb6..a42d9aa68648 100644 --- a/include/linux/soc/ti/omap1-soc.h +++ b/include/linux/soc/ti/omap1-soc.h @@ -20,22 +20,6 @@ #undef MULTI_OMAP1 #undef OMAP_NAME -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif #ifdef CONFIG_ARCH_OMAP15XX # ifdef OMAP_NAME # undef MULTI_OMAP1 @@ -69,7 +53,6 @@ unsigned int omap_rev(void); /* * Macros to group OMAP into cpu classes. * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 */ @@ -89,23 +72,13 @@ static inline int is_omap ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } -IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) -#define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 #define cpu_is_omap16xx() 0 #if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif # if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() is_omap15xx() @@ -115,14 +88,6 @@ IS_OMAP_CLASS(16xx, 0x16) # define cpu_is_omap16xx() is_omap16xx() # endif #else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif # if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() 1 diff --git a/include/linux/spi/s3c24xx-fiq.h b/include/linux/spi/s3c24xx-fiq.h deleted file mode 100644 index d2842ac1de27..000000000000 --- a/include/linux/spi/s3c24xx-fiq.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* linux/drivers/spi/spi_s3c24xx_fiq.h - * - * Copyright 2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX SPI - FIQ pseudo-DMA transfer support -*/ - -#ifndef __LINUX_SPI_S3C24XX_FIQ_H -#define __LINUX_SPI_S3C24XX_FIQ_H __FILE__ - -/* We have R8 through R13 to play with */ - -#ifdef __ASSEMBLY__ -#define __REG_NR(x) r##x -#else - -extern struct spi_fiq_code s3c24xx_spi_fiq_txrx; -extern struct spi_fiq_code s3c24xx_spi_fiq_tx; -extern struct spi_fiq_code s3c24xx_spi_fiq_rx; - -#define __REG_NR(x) (x) -#endif - -#define fiq_rspi __REG_NR(8) -#define fiq_rtmp __REG_NR(9) -#define fiq_rrx __REG_NR(10) -#define fiq_rtx __REG_NR(11) -#define fiq_rcount __REG_NR(12) -#define fiq_rirq __REG_NR(13) - -#endif /* __LINUX_SPI_S3C24XX_FIQ_H */ diff --git a/include/linux/spi/s3c24xx.h b/include/linux/spi/s3c24xx.h deleted file mode 100644 index 9b8bb22d5b0c..000000000000 --- a/include/linux/spi/s3c24xx.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info -*/ - -#ifndef __LINUX_SPI_S3C24XX_H -#define __LINUX_SPI_S3C24XX_H __FILE__ - -struct s3c2410_spi_info { - unsigned int num_cs; /* total chipselects */ - int bus_num; /* bus number to use. */ - unsigned int use_fiq:1; /* use fiq */ -}; - -extern int s3c24xx_set_fiq(unsigned int irq, u32 *ack_ptr, bool on); - -#endif /* __LINUX_SPI_S3C24XX_H */ diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h deleted file mode 100644 index 2516082cd3a9..000000000000 --- a/include/linux/ucb1400.h +++ /dev/null @@ -1,160 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Register definitions and functions for: - * Philips UCB1400 driver - * - * Based on ucb1400_ts: - * Author: Nicolas Pitre - * Created: September 25, 2006 - * Copyright: MontaVista Software, Inc. - * - * Spliting done by: Marek Vasut <marek.vasut@gmail.com> - * If something doesn't work and it worked before spliting, e-mail me, - * dont bother Nicolas please ;-) - * - * This code is heavily based on ucb1x00-*.c copyrighted by Russell King - * covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has - * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request. - */ - -#ifndef _LINUX__UCB1400_H -#define _LINUX__UCB1400_H - -#include <sound/ac97_codec.h> -#include <linux/mutex.h> -#include <linux/platform_device.h> -#include <linux/gpio/driver.h> - -/* - * UCB1400 AC-link registers - */ - -#define UCB_IO_DATA 0x5a -#define UCB_IO_DIR 0x5c -#define UCB_IE_RIS 0x5e -#define UCB_IE_FAL 0x60 -#define UCB_IE_STATUS 0x62 -#define UCB_IE_CLEAR 0x62 -#define UCB_IE_ADC (1 << 11) -#define UCB_IE_TSPX (1 << 12) - -#define UCB_TS_CR 0x64 -#define UCB_TS_CR_TSMX_POW (1 << 0) -#define UCB_TS_CR_TSPX_POW (1 << 1) -#define UCB_TS_CR_TSMY_POW (1 << 2) -#define UCB_TS_CR_TSPY_POW (1 << 3) -#define UCB_TS_CR_TSMX_GND (1 << 4) -#define UCB_TS_CR_TSPX_GND (1 << 5) -#define UCB_TS_CR_TSMY_GND (1 << 6) -#define UCB_TS_CR_TSPY_GND (1 << 7) -#define UCB_TS_CR_MODE_INT (0 << 8) -#define UCB_TS_CR_MODE_PRES (1 << 8) -#define UCB_TS_CR_MODE_POS (2 << 8) -#define UCB_TS_CR_BIAS_ENA (1 << 11) -#define UCB_TS_CR_TSPX_LOW (1 << 12) -#define UCB_TS_CR_TSMX_LOW (1 << 13) - -#define UCB_ADC_CR 0x66 -#define UCB_ADC_SYNC_ENA (1 << 0) -#define UCB_ADC_VREFBYP_CON (1 << 1) -#define UCB_ADC_INP_TSPX (0 << 2) -#define UCB_ADC_INP_TSMX (1 << 2) -#define UCB_ADC_INP_TSPY (2 << 2) -#define UCB_ADC_INP_TSMY (3 << 2) -#define UCB_ADC_INP_AD0 (4 << 2) -#define UCB_ADC_INP_AD1 (5 << 2) -#define UCB_ADC_INP_AD2 (6 << 2) -#define UCB_ADC_INP_AD3 (7 << 2) -#define UCB_ADC_EXT_REF (1 << 5) -#define UCB_ADC_START (1 << 7) -#define UCB_ADC_ENA (1 << 15) - -#define UCB_ADC_DATA 0x68 -#define UCB_ADC_DAT_VALID (1 << 15) - -#define UCB_FCSR 0x6c -#define UCB_FCSR_AVE (1 << 12) - -#define UCB_ADC_DAT_MASK 0x3ff - -#define UCB_ID 0x7e -#define UCB_ID_1400 0x4304 - -struct ucb1400_gpio { - struct gpio_chip gc; - struct snd_ac97 *ac97; - int gpio_offset; -}; - -struct ucb1400_ts { - struct input_dev *ts_idev; - int id; - int irq; - struct snd_ac97 *ac97; - wait_queue_head_t ts_wait; - bool stopped; -}; - -struct ucb1400 { - struct platform_device *ucb1400_ts; - struct platform_device *ucb1400_gpio; -}; - -struct ucb1400_pdata { - int irq; - int gpio_offset; - int (*gpio_setup)(struct device *dev, int ngpio); - int (*gpio_teardown)(struct device *dev, int ngpio); -}; - -static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg) -{ - return ac97->bus->ops->read(ac97, reg); -} - -static inline void ucb1400_reg_write(struct snd_ac97 *ac97, u16 reg, u16 val) -{ - ac97->bus->ops->write(ac97, reg, val); -} - -static inline u16 ucb1400_gpio_get_value(struct snd_ac97 *ac97, u16 gpio) -{ - return ucb1400_reg_read(ac97, UCB_IO_DATA) & (1 << gpio); -} - -static inline void ucb1400_gpio_set_value(struct snd_ac97 *ac97, u16 gpio, - u16 val) -{ - ucb1400_reg_write(ac97, UCB_IO_DATA, val ? - ucb1400_reg_read(ac97, UCB_IO_DATA) | (1 << gpio) : - ucb1400_reg_read(ac97, UCB_IO_DATA) & ~(1 << gpio)); -} - -static inline u16 ucb1400_gpio_get_direction(struct snd_ac97 *ac97, u16 gpio) -{ - return ucb1400_reg_read(ac97, UCB_IO_DIR) & (1 << gpio); -} - -static inline void ucb1400_gpio_set_direction(struct snd_ac97 *ac97, u16 gpio, - u16 dir) -{ - ucb1400_reg_write(ac97, UCB_IO_DIR, dir ? - ucb1400_reg_read(ac97, UCB_IO_DIR) | (1 << gpio) : - ucb1400_reg_read(ac97, UCB_IO_DIR) & ~(1 << gpio)); -} - -static inline void ucb1400_adc_enable(struct snd_ac97 *ac97) -{ - ucb1400_reg_write(ac97, UCB_ADC_CR, UCB_ADC_ENA); -} - -static inline void ucb1400_adc_disable(struct snd_ac97 *ac97) -{ - ucb1400_reg_write(ac97, UCB_ADC_CR, 0); -} - - -unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel, - int adcsync); - -#endif diff --git a/include/linux/z2_battery.h b/include/linux/z2_battery.h deleted file mode 100644 index 9e8be7a7cd25..000000000000 --- a/include/linux/z2_battery.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_Z2_BATTERY_H -#define _LINUX_Z2_BATTERY_H - -struct z2_battery_info { - int batt_I2C_bus; - int batt_I2C_addr; - int batt_I2C_reg; - int min_voltage; - int max_voltage; - int batt_div; - int batt_mult; - int batt_tech; - char *batt_name; -}; - -#endif |