Merge tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.4-rc1.

  Nothing major, just lots of tiny, constant, forward development. This
  includes:

   - obligatory n_gsm updates and feature additions

   - 8250_em driver updates

   - sh-sci driver updates

   - dts cleanups and updates

   - general cleanups and improvements by Ilpo and Jiri

   - other small serial driver core fixes and driver updates

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (87 commits)
  n_gsm: Use array_index_nospec() with index that comes from userspace
  tty: vt: drop checks for undefined VT_SINGLE_DRIVER
  tty: vt: distribute EXPORT_SYMBOL()
  tty: vt: simplify some cases in tioclinux()
  tty: vt: reformat tioclinux()
  tty: serial: sh-sci: Fix end of transmission on SCI
  tty: serial: sh-sci: Add support for tx end interrupt handling
  tty: serial: sh-sci: Fix TE setting on SCI IP
  tty: serial: sh-sci: Add RZ/G2L SCIFA DMA rx support
  tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support
  serial: max310x: fix IO data corruption in batched operations
  serial: core: Disable uart_start() on uart_remove_one_port()
  serial: 8250: Reinit port->pm on port specific driver unbind
  serial: 8250: Add missing wakeup event reporting
  tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform
  tty: serial: fsl_lpuart: adjust buffer length to the intended size
  serial: fix TIOCSRS485 locking
  serial: make SiFive serial drivers depend on ARCH_ symbols
  tty: synclink_gt: don't allocate and pass dummy flags
  tty: serial: simplify qcom_geni_serial_send_chunk_fifo()
  ...

3 files changed, 28 insertions, 34 deletions

diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 19376bee9667..6f78f302d272 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -18,16 +18,16 @@ struct plat_serial8250_port {
 	unsigned long	iobase;		/* io base address */
 	void __iomem	*membase;	/* ioremap cookie or NULL */
 	resource_size_t	mapbase;	/* resource base */
+	unsigned int	uartclk;	/* UART clock rate */
 	unsigned int	irq;		/* interrupt number */
 	unsigned long	irqflags;	/* request_irq flags */
-	unsigned int	uartclk;	/* UART clock rate */
 	void            *private_data;
 	unsigned char	regshift;	/* register shift */
 	unsigned char	iotype;		/* UPIO_* */
 	unsigned char	hub6;
 	unsigned char	has_sysrq;	/* supports magic SysRq */
-	upf_t		flags;		/* UPF_* flags */
 	unsigned int	type;		/* If UPF_FIXED_TYPE */
+	upf_t		flags;		/* UPF_* flags */
 	unsigned int	(*serial_in)(struct uart_port *, int);
 	void		(*serial_out)(struct uart_port *, int, int);
 	void		(*set_termios)(struct uart_port *,
@@ -151,26 +151,22 @@ void serial8250_unregister_port(int line);
 void serial8250_suspend_port(int line);
 void serial8250_resume_port(int line);
 
-extern int early_serial_setup(struct uart_port *port);
-
-extern int early_serial8250_setup(struct earlycon_device *device,
-					 const char *options);
-extern void serial8250_update_uartclk(struct uart_port *port,
-				      unsigned int uartclk);
-extern void serial8250_do_set_termios(struct uart_port *port,
-		struct ktermios *termios, const struct ktermios *old);
-extern void serial8250_do_set_ldisc(struct uart_port *port,
-				    struct ktermios *termios);
-extern unsigned int serial8250_do_get_mctrl(struct uart_port *port);
-extern int serial8250_do_startup(struct uart_port *port);
-extern void serial8250_do_shutdown(struct uart_port *port);
-extern void serial8250_do_pm(struct uart_port *port, unsigned int state,
-			     unsigned int oldstate);
-extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
-extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
-				      unsigned int quot,
-				      unsigned int quot_frac);
-extern int fsl8250_handle_irq(struct uart_port *port);
+int early_serial_setup(struct uart_port *port);
+int early_serial8250_setup(struct earlycon_device *device, const char *options);
+
+void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk);
+void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
+			       const struct ktermios *old);
+void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios);
+unsigned int serial8250_do_get_mctrl(struct uart_port *port);
+int serial8250_do_startup(struct uart_port *port);
+void serial8250_do_shutdown(struct uart_port *port);
+void serial8250_do_pm(struct uart_port *port, unsigned int state,
+		      unsigned int oldstate);
+void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl);
+void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud,
+			       unsigned int quot, unsigned int quot_frac);
+int fsl8250_handle_irq(struct uart_port *port);
 int serial8250_handle_irq(struct uart_port *port, unsigned int iir);
 u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr);
 void serial8250_read_char(struct uart_8250_port *up, u16 lsr);
@@ -183,9 +179,8 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
 int serial8250_console_setup(struct uart_port *port, char *options, bool probe);
 int serial8250_console_exit(struct uart_port *port);
 
-extern void serial8250_set_isa_configurator(void (*v)
-					(int port, struct uart_port *up,
-						u32 *capabilities));
+void serial8250_set_isa_configurator(void (*v)(int port, struct uart_port *up,
+					       u32 *capabilities));
 
 #ifdef CONFIG_SERIAL_8250_RT288X
 unsigned int au_serial_in(struct uart_port *p, int offset);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 9e3e5e0d11b2..66ecec15a1bf 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -553,7 +553,7 @@ struct uart_port {
 #define UPSTAT_AUTOXOFF		((__force upstat_t) (1 << 4))
 #define UPSTAT_SYNC_FIFO	((__force upstat_t) (1 << 5))
 
-	int			hw_stopped;		/* sw-assisted CTS flow state */
+	bool			hw_stopped;		/* sw-assisted CTS flow state */
 	unsigned int		mctrl;			/* current modem ctrl settings */
 	unsigned int		frame_time;		/* frame timing in ns */
 	unsigned int		type;			/* port type */
@@ -812,9 +812,8 @@ extern const struct earlycon_id __earlycon_table_end[];
 
 #define EARLYCON_DECLARE(_name, fn)	OF_EARLYCON_DECLARE(_name, "", fn)
 
-extern int of_setup_earlycon(const struct earlycon_id *match,
-			     unsigned long node,
-			     const char *options);
+int of_setup_earlycon(const struct earlycon_id *match, unsigned long node,
+		      const char *options);
 
 #ifdef CONFIG_SERIAL_EARLYCON
 extern bool earlycon_acpi_spcr_enable __initdata;
@@ -897,11 +896,11 @@ static inline bool uart_softcts_mode(struct uart_port *uport)
  * The following are helper functions for the low level drivers.
  */
 
-extern void uart_handle_dcd_change(struct uart_port *uport, bool active);
-extern void uart_handle_cts_change(struct uart_port *uport, bool active);
+void uart_handle_dcd_change(struct uart_port *uport, bool active);
+void uart_handle_cts_change(struct uart_port *uport, bool active);
 
-extern void uart_insert_char(struct uart_port *port, unsigned int status,
-		 unsigned int overrun, unsigned int ch, unsigned int flag);
+void uart_insert_char(struct uart_port *port, unsigned int status,
+		      unsigned int overrun, unsigned int ch, unsigned int flag);
 
 void uart_xchar_out(struct uart_port *uport, int offset);
 
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 093935e97f42..60871a9d3212 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -227,7 +227,7 @@ struct tty_struct {
 		unsigned long unused[0];
 	} __aligned(sizeof(unsigned long)) ctrl;
 
-	int hw_stopped;
+	bool hw_stopped;
 	unsigned int receive_room;
 	int flow_change;