Merge tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char/misc driver changes for 5.15-rc1.

  Lots of different driver subsystems are being updated in here,
  notably:

   - mhi subsystem update

   - fpga subsystem update

   - coresight/hwtracing subsystem update

   - interconnect subsystem update

   - nvmem subsystem update

   - parport drivers update

   - phy subsystem update

   - soundwire subsystem update

  and there are some other char/misc drivers being updated as well:

   - binder driver additions

   - new misc drivers

   - lkdtm driver updates

   - mei driver updates

   - sram driver updates

   - other minor driver updates.

  Note, there are no habanalabs driver updates in this pull request,
  that will probably come later before -rc1 is out in a different
  request.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  Revert "bus: mhi: Add inbound buffers allocation flag"
  misc/pvpanic: fix set driver data
  VMCI: fix NULL pointer dereference when unmapping queue pair
  char: mware: fix returnvar.cocci warnings
  parport: remove non-zero check on count
  soundwire: cadence: do not extend reset delay
  soundwire: intel: conditionally exit clock stop mode on system suspend
  soundwire: intel: skip suspend/resume/wake when link was not started
  soundwire: intel: fix potential race condition during power down
  phy: qcom-qmp: Add support for SM6115 UFS phy
  dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
  phy: qmp: Provide unique clock names for DP clocks
  lkdtm: remove IDE_CORE_CP crashpoint
  lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
  coresight: Replace deprecated CPU-hotplug functions.
  Documentation: coresight: Add documentation for CoreSight config
  coresight: syscfg: Add initial configfs support
  coresight: config: Add preloaded configurations
  coresight: etm4x: Add complex configuration handlers to etmv4
  coresight: etm-perf: Update to activate selected configuration
  ...

7 files changed, 31 insertions, 5 deletions

diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index 85008a65e21f..93a2922b7653 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -220,6 +220,10 @@ struct coresight_sysfs_link {
  * @nr_links:   number of sysfs links created to other components from this
  *		device. These will appear in the "connections" group.
  * @has_conns_grp: Have added a "connections" group for sysfs links.
+ * @feature_csdev_list: List of complex feature programming added to the device.
+ * @config_csdev_list:  List of system configurations added to the device.
+ * @cscfg_csdev_lock:	Protect the lists of configurations and features.
+ * @active_cscfg_ctxt:  Context information for current active system configuration.
  */
 struct coresight_device {
 	struct coresight_platform_data *pdata;
@@ -241,6 +245,11 @@ struct coresight_device {
 	int nr_links;
 	bool has_conns_grp;
 	bool ect_enabled; /* true only if associated ect device is enabled */
+	/* system configuration and feature lists */
+	struct list_head feature_csdev_list;
+	struct list_head config_csdev_list;
+	spinlock_t cscfg_csdev_lock;
+	void *active_cscfg_ctxt;
 };
 
 /*
diff --git a/include/linux/dfl.h b/include/linux/dfl.h
index 6cc10982351a..431636a0dc78 100644
--- a/include/linux/dfl.h
+++ b/include/linux/dfl.h
@@ -38,6 +38,7 @@ struct dfl_device {
 	int id;
 	u16 type;
 	u16 feature_id;
+	u8 revision;
 	struct resource mmio_res;
 	int *irqs;
 	unsigned int num_irqs;
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 9d1a5c175065..56b426fe020c 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -52,6 +52,10 @@
 #define	ZYNQMP_PM_CAPABILITY_WAKEUP	0x4U
 #define	ZYNQMP_PM_CAPABILITY_UNUSABLE	0x8U
 
+/* Loader commands */
+#define PM_LOAD_PDI	0x701
+#define PDI_SRC_DDR	0xF
+
 /*
  * Firmware FPGA Manager flags
  * XILINX_ZYNQMP_PM_FPGA_FULL:	FPGA full reconfiguration
@@ -411,6 +415,7 @@ int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param,
 				 u32 *value);
 int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
 				 u32 value);
+int zynqmp_pm_load_pdi(const u32 src, const u64 address);
 #else
 static inline int zynqmp_pm_get_api_version(u32 *version)
 {
@@ -622,6 +627,11 @@ static inline int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param,
 {
 	return -ENODEV;
 }
+
+static inline int zynqmp_pm_load_pdi(const u32 src, const u64 address)
+{
+	return -ENODEV;
+}
 #endif
 
 #endif /* __FIRMWARE_ZYNQMP_H__ */
diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h
index ec2cd8bfceb0..474c1f506307 100644
--- a/include/linux/fpga/fpga-mgr.h
+++ b/include/linux/fpga/fpga-mgr.h
@@ -110,7 +110,7 @@ struct fpga_image_info {
  * @initial_header_size: Maximum number of bytes that should be passed into write_init
  * @state: returns an enum value of the FPGA's state
  * @status: returns status of the FPGA, including reconfiguration error code
- * @write_init: prepare the FPGA to receive confuration data
+ * @write_init: prepare the FPGA to receive configuration data
  * @write: write count bytes of configuration data to the FPGA
  * @write_sg: write the scatter list of configuration data to the FPGA
  * @write_complete: set FPGA to operating state after writing is done
diff --git a/include/linux/mei_cl_bus.h b/include/linux/mei_cl_bus.h
index 07f5ef8fc456..c6786c12b207 100644
--- a/include/linux/mei_cl_bus.h
+++ b/include/linux/mei_cl_bus.h
@@ -91,12 +91,13 @@ void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv);
 		      mei_cldev_driver_register,\
 		      mei_cldev_driver_unregister)
 
-ssize_t mei_cldev_send(struct mei_cl_device *cldev, u8 *buf, size_t length);
+ssize_t mei_cldev_send(struct mei_cl_device *cldev, const u8 *buf,
+		       size_t length);
 ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length);
 ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf,
 				size_t length);
-ssize_t mei_cldev_send_vtag(struct mei_cl_device *cldev, u8 *buf, size_t length,
-			    u8 vtag);
+ssize_t mei_cldev_send_vtag(struct mei_cl_device *cldev, const u8 *buf,
+			    size_t length, u8 vtag);
 ssize_t mei_cldev_recv_vtag(struct mei_cl_device *cldev, u8 *buf, size_t length,
 			    u8 *vtag);
 ssize_t mei_cldev_recv_nonblock_vtag(struct mei_cl_device *cldev, u8 *buf,
@@ -114,6 +115,6 @@ void mei_cldev_set_drvdata(struct mei_cl_device *cldev, void *data);
 
 int mei_cldev_enable(struct mei_cl_device *cldev);
 int mei_cldev_disable(struct mei_cl_device *cldev);
-bool mei_cldev_enabled(struct mei_cl_device *cldev);
+bool mei_cldev_enabled(const struct mei_cl_device *cldev);
 
 #endif /* _LINUX_MEI_CL_BUS_H */
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index beb918328eef..723985879035 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -303,6 +303,7 @@ struct mhi_controller_config {
  * @rddm_size: RAM dump size that host should allocate for debugging purpose
  * @sbl_size: SBL image size downloaded through BHIe (optional)
  * @seg_len: BHIe vector size (optional)
+ * @reg_len: Length of the MHI MMIO region (required)
  * @fbc_image: Points to firmware image buffer
  * @rddm_image: Points to RAM dump buffer
  * @mhi_chan: Points to the channel configuration table
@@ -387,6 +388,7 @@ struct mhi_controller {
 	size_t rddm_size;
 	size_t sbl_size;
 	size_t seg_len;
+	size_t reg_len;
 	struct image_info *fbc_image;
 	struct image_info *rddm_image;
 	struct mhi_chan *mhi_chan;
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index a48ac3e77301..76ce3f3ac0f2 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -661,6 +661,8 @@ struct sdw_slave_ops {
  * initialized
  * @first_interrupt_done: status flag tracking if the interrupt handling
  * for a Slave happens for the first time after enumeration
+ * @is_mockup_device: status flag used to squelch errors in the command/control
+ * protocol for SoundWire mockup devices
  */
 struct sdw_slave {
 	struct sdw_slave_id id;
@@ -683,6 +685,7 @@ struct sdw_slave {
 	struct completion initialization_complete;
 	u32 unattach_request;
 	bool first_interrupt_done;
+	bool is_mockup_device;
 };
 
 #define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev)