summaryrefslogtreecommitdiff
path: root/include/media
diff options
context:
space:
mode:
authorMaxim Levitsky <maximlevitsky@gmail.com>2010-07-31 11:59:23 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2010-08-08 23:43:00 -0300
commite589333f346b58f8da5bb8152e1219c52d375ccc (patch)
tree4ff05f4f9c5a06c532084ed46b3612ebeec1e21c /include/media
parent4a702ebf61120906696f8366dd2be0653b1643e3 (diff)
V4L/DVB: IR: extend interfaces to support more device settings
LIRC: add new IOCTL that enables learning mode (wide band receiver) Still missing features: carrier report & timeout reports. Will need to pack these into ir_raw_event Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'include/media')
-rw-r--r--include/media/ir-core.h12
-rw-r--r--include/media/lirc.h5
2 files changed, 15 insertions, 2 deletions
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index a781045aeed5..eb7fddf8f607 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -44,6 +44,8 @@ enum rc_driver_type {
* @timeout: optional time after which device stops sending data
* @min_timeout: minimum timeout supported by device
* @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
* @priv: driver-specific data, to be used on the callbacks
* @change_protocol: allow changing the protocol used on hardware decoders
* @open: callback to allow drivers to enable polling/irq when IR input device
@@ -52,9 +54,12 @@ enum rc_driver_type {
* is opened.
* @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
* @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
* @tx_ir: transmit IR
* @s_idle: optional: enable/disable hardware idle mode, upon which,
- * device doesn't interrupt host untill it sees IR data
+ device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
*/
struct ir_dev_props {
enum rc_driver_type driver_type;
@@ -65,6 +70,8 @@ struct ir_dev_props {
u32 min_timeout;
u32 max_timeout;
+ u32 rx_resolution;
+ u32 tx_resolution;
void *priv;
int (*change_protocol)(void *priv, u64 ir_type);
@@ -72,8 +79,11 @@ struct ir_dev_props {
void (*close)(void *priv);
int (*s_tx_mask)(void *priv, u32 mask);
int (*s_tx_carrier)(void *priv, u32 carrier);
+ int (*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
+ int (*s_rx_carrier_range)(void *priv, u32 min, u32 max);
int (*tx_ir)(void *priv, int *txbuf, u32 n);
void (*s_idle)(void *priv, int enable);
+ int (*s_learning_mode)(void *priv, int enable);
};
struct ir_input_dev {
diff --git a/include/media/lirc.h b/include/media/lirc.h
index 42c467c50519..6678a169fd9e 100644
--- a/include/media/lirc.h
+++ b/include/media/lirc.h
@@ -77,6 +77,7 @@
#define LIRC_CAN_SET_REC_FILTER 0x08000000
#define LIRC_CAN_MEASURE_CARRIER 0x02000000
+#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000
#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK)
#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK)
@@ -145,7 +146,7 @@
* if enabled from the next key press on the driver will send
* LIRC_MODE2_FREQUENCY packets
*/
-#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
+#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32)
/*
* to set a range use
@@ -162,4 +163,6 @@
#define LIRC_SETUP_START _IO('i', 0x00000021)
#define LIRC_SETUP_END _IO('i', 0x00000022)
+#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32)
+
#endif