Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

1 files changed, 65 insertions, 17 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 51626b4175c0..f882fe1f9709 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -569,13 +569,14 @@
  *	authentication/association or not receiving a response from the AP.
  *	Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
  *	well to remain backwards compatible.
- * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself.
- *	When the driver roamed in a network that requires 802.1X authentication,
- *	%NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication
- *	was done by the driver or if roaming was done using Fast Transition
- *	protocol (in which case 802.1X authentication is not needed). If
- *	%NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for
- *	the 802.1X authentication.
+ *	When establishing a security association, drivers that support 4 way
+ *	handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
+ *	the 4 way handshake is completed successfully.
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
+ *	When a security association was established with the new AP (e.g. if
+ *	the FT protocol was used for roaming or the driver completed the 4 way
+ *	handshake), this event should be followed by an
+ *	%NL80211_CMD_PORT_AUTHORIZED event.
  * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
  *	userspace that a connection was dropped by the AP or due to other
  *	reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
@@ -982,6 +983,14 @@
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	&NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+ *	handshake was completed successfully by the driver. The BSSID is
+ *	specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ *	offload should send this event after indicating 802.11 association with
+ *	&NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+ *	&NL80211_CMD_DISCONNECT should be indicated instead.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
  *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
@@ -1185,6 +1194,10 @@ enum nl80211_commands {
 	NL80211_CMD_SET_PMK,
 	NL80211_CMD_DEL_PMK,
 
+	NL80211_CMD_PORT_AUTHORIZED,
+
+	NL80211_CMD_RELOAD_REGDB,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1407,8 +1420,12 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
  *	used for the association (&enum nl80211_mfp, represented as a u32);
- *	this attribute can be used
- *	with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ *	this attribute can be used with %NL80211_CMD_ASSOCIATE and
+ *	%NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
+ *	%NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
+ *	must have decided whether to use management frame protection or not.
+ *	Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
+ *	let the driver (or the firmware) decide whether to use MFP or not.
  *
  * @NL80211_ATTR_STA_FLAGS2: Attribute containing a
  *	&struct nl80211_sta_flag_update.
@@ -2134,10 +2151,7 @@ enum nl80211_commands {
  *	in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
  *	wants to use the supported offload of the 4-way handshake.
  * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
- * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED
- *	notification indicating that that 802.1X authentication was done by
- *	the driver or is not needed (because roaming used the Fast Transition
- *	protocol).
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -3947,10 +3961,12 @@ enum nl80211_key_type {
  * enum nl80211_mfp - Management frame protection state
  * @NL80211_MFP_NO: Management frame protection not used
  * @NL80211_MFP_REQUIRED: Management frame protection required
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional
  */
 enum nl80211_mfp {
 	NL80211_MFP_NO,
 	NL80211_MFP_REQUIRED,
+	NL80211_MFP_OPTIONAL,
 };
 
 enum nl80211_wpa_versions {
@@ -4914,6 +4930,17 @@ enum nl80211_feature_flags {
  *	handshake with 802.1X in station mode (will pass EAP frames to the host
  *	and accept the set_pmk/del_pmk commands), doing it in the host might not
  *	be supported.
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
+ *	the max channel attribute in the FILS request params IE with the
+ *	actual dwell time.
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
+ *	response
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
+ *	the first probe request in each channel at rate of at least 5.5Mbps.
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
+ *	probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ *	value in %NL80211_ATTR_USE_MFP.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4936,6 +4963,11 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
 	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
 	NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+	NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
+	NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+	NL80211_EXT_FEATURE_MFP_OPTIONAL,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5012,12 +5044,28 @@ enum nl80211_timeout_reason {
  *	locally administered 1, multicast 0) is assumed.
  *	This flag must not be requested when the feature isn't supported, check
  *	the nl80211 feature flags for the device.
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
+ *	request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+ *	rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
+ *	only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+ *	and suppression (if it has received a broadcast Probe Response frame,
+ *	Beacon frame or FILS Discovery frame from an AP that the STA considers
+ *	a suitable candidate for (re-)association - suitable in terms of
+ *	SSID and/or RSSI
  */
 enum nl80211_scan_flags {
-	NL80211_SCAN_FLAG_LOW_PRIORITY			= 1<<0,
-	NL80211_SCAN_FLAG_FLUSH				= 1<<1,
-	NL80211_SCAN_FLAG_AP				= 1<<2,
-	NL80211_SCAN_FLAG_RANDOM_ADDR			= 1<<3,
+	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
+	NL80211_SCAN_FLAG_FLUSH					= 1<<1,
+	NL80211_SCAN_FLAG_AP					= 1<<2,
+	NL80211_SCAN_FLAG_RANDOM_ADDR				= 1<<3,
+	NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME			= 1<<4,
+	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
+	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
 };
 
 /**