Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.

   2) Add fib_sync_mem to control the amount of dirty memory we allow to
      queue up between synchronize RCU calls, from David Ahern.

   3) Make flow classifier more lockless, from Vlad Buslov.

   4) Add PHY downshift support to aquantia driver, from Heiner
      Kallweit.

   5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
      contention on SLAB spinlocks in heavy RPC workloads.

   6) Partial GSO offload support in XFRM, from Boris Pismenny.

   7) Add fast link down support to ethtool, from Heiner Kallweit.

   8) Use siphash for IP ID generator, from Eric Dumazet.

   9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
      entries, from David Ahern.

  10) Move skb->xmit_more into a per-cpu variable, from Florian
      Westphal.

  11) Improve eBPF verifier speed and increase maximum program size,
      from Alexei Starovoitov.

  12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
      spinlocks. From Neil Brown.

  13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.

  14) Improve link partner cap detection in generic PHY code, from
      Heiner Kallweit.

  15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
      Maguire.

  16) Remove SKB list implementation assumptions in SCTP, your's truly.

  17) Various cleanups, optimizations, and simplifications in r8169
      driver. From Heiner Kallweit.

  18) Add memory accounting on TX and RX path of SCTP, from Xin Long.

  19) Switch PHY drivers over to use dynamic featue detection, from
      Heiner Kallweit.

  20) Support flow steering without masking in dpaa2-eth, from Ioana
      Ciocoi.

  21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
      Pirko.

  22) Increase the strict parsing of current and future netlink
      attributes, also export such policies to userspace. From Johannes
      Berg.

  23) Allow DSA tag drivers to be modular, from Andrew Lunn.

  24) Remove legacy DSA probing support, also from Andrew Lunn.

  25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
      Haabendal.

  26) Add a generic tracepoint for TX queue timeouts to ease debugging,
      from Cong Wang.

  27) More indirect call optimizations, from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
  cxgb4: Fix error path in cxgb4_init_module
  net: phy: improve pause mode reporting in phy_print_status
  dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
  net: macb: Change interrupt and napi enable order in open
  net: ll_temac: Improve error message on error IRQ
  net/sched: remove block pointer from common offload structure
  net: ethernet: support of_get_mac_address new ERR_PTR error
  net: usb: smsc: fix warning reported by kbuild test robot
  staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
  net: dsa: support of_get_mac_address new ERR_PTR error
  net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
  vrf: sit mtu should not be updated when vrf netdev is the link
  net: dsa: Fix error cleanup path in dsa_init_module
  l2tp: Fix possible NULL pointer dereference
  taprio: add null check on sched_nest to avoid potential null pointer dereference
  net: mvpp2: cls: fix less than zero check on a u32 variable
  net_sched: sch_fq: handle non connected flows
  net_sched: sch_fq: do not assume EDT packets are ordered
  net: hns3: use devm_kcalloc when allocating desc_cb
  net: hns3: some cleanup for struct hns3_enet_ring
  ...

1 files changed, 84 insertions, 2 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dd4f86ee286e..6f09d1500960 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018 Intel Corporation
+ * Copyright (C) 2018-2019 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -1065,6 +1065,26 @@
  *	indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes
  *	determining the width and type.
  *
+ * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to
+ *	offload OWE processing to user space. This intends to support
+ *	OWE AKM by the host drivers that implement SME but rely
+ *	on the user space for the cryptographic/DH IE processing in AP mode.
+ *
+ * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric
+ *	refreshing, is that from one mesh point we be able to send some data
+ *	frames to other mesh points which are not currently selected as a
+ *	primary traffic path, but which are only 1 hop away. The absence of
+ *	the primary path to the chosen node makes it necessary to apply some
+ *	form of marking on a chosen packet stream so that the packets can be
+ *	properly steered to the selected node for testing, and not by the
+ *	regular mesh path lookup. Further, the packets must be of type data
+ *	so that the rate control (often embedded in firmware) is used for
+ *	rate selection.
+ *
+ *	Here attribute %NL80211_ATTR_MAC is used to specify connected mesh
+ *	peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame
+ *	content. The frame is ethernet data.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1285,6 +1305,10 @@ enum nl80211_commands {
 
 	NL80211_CMD_NOTIFY_RADAR,
 
+	NL80211_CMD_UPDATE_OWE_INFO,
+
+	NL80211_CMD_PROBE_MESH_LINK,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2308,6 +2332,15 @@ enum nl80211_commands {
  * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime
  *	scheduler.
  *
+ * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for
+ *	station associated with the AP. See &enum nl80211_tx_power_setting for
+ *	possible values.
+ * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This
+ *	allows to set Tx power for a station. If this attribute is not included,
+ *	the default per-interface tx power setting will be overriding. Driver
+ *	should be picking up the lowest tx power, either tx power per-interface
+ *	or per-station.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2758,6 +2791,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_PEER_MEASUREMENTS,
 
 	NL80211_ATTR_AIRTIME_WEIGHT,
+	NL80211_ATTR_STA_TX_POWER_SETTING,
+	NL80211_ATTR_STA_TX_POWER,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -2802,7 +2837,7 @@ enum nl80211_attrs {
 
 #define NL80211_MAX_SUPP_RATES			32
 #define NL80211_MAX_SUPP_HT_RATES		77
-#define NL80211_MAX_SUPP_REG_RULES		64
+#define NL80211_MAX_SUPP_REG_RULES		128
 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY	0
 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY	16
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
@@ -3139,6 +3174,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames
  *	sent to the station (u64, usec)
  * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
+ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -3184,6 +3220,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_CONNECTED_TO_GATE,
 	NL80211_STA_INFO_TX_DURATION,
 	NL80211_STA_INFO_AIRTIME_WEIGHT,
+	NL80211_STA_INFO_AIRTIME_LINK_METRIC,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -3638,6 +3675,14 @@ enum nl80211_reg_rule_attr {
  *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
  *	(this cannot be used together with SSID).
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
+ *	band specific minimum rssi thresholds for the bands defined in
+ *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a
+ *	band shall be encapsulated in attribute with type value equals to one
+ *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the
+ *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated
+ *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such
+ *	attributes will be nested within this attribute.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -3650,6 +3695,7 @@ enum nl80211_sched_scan_match_attr {
 	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
+	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4135,6 +4181,27 @@ enum nl80211_channel_type {
 };
 
 /**
+ * enum nl80211_key_mode - Key mode
+ *
+ * @NL80211_KEY_RX_TX: (Default)
+ *	Key can be used for Rx and Tx immediately
+ *
+ * The following modes can only be selected for unicast keys and when the
+ * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID:
+ *
+ * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY:
+ *	Unicast key can only be used for Rx, Tx not allowed, yet
+ * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY:
+ *	The unicast key identified by idx and mac is cleared for Tx and becomes
+ *	the preferred Tx key for the station.
+ */
+enum nl80211_key_mode {
+	NL80211_KEY_RX_TX,
+	NL80211_KEY_NO_TX,
+	NL80211_KEY_SET_TX
+};
+
+/**
  * enum nl80211_chan_width - channel width definitions
  *
  * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH
@@ -4377,6 +4444,9 @@ enum nl80211_key_default_types {
  * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
  *	attributes, specifying what a key should be set as default as.
  *	See &enum nl80211_key_default_types.
+ * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode.
+ *	Defaults to @NL80211_KEY_RX_TX.
+ *
  * @__NL80211_KEY_AFTER_LAST: internal
  * @NL80211_KEY_MAX: highest key attribute
  */
@@ -4390,6 +4460,7 @@ enum nl80211_key_attributes {
 	NL80211_KEY_DEFAULT_MGMT,
 	NL80211_KEY_TYPE,
 	NL80211_KEY_DEFAULT_TYPES,
+	NL80211_KEY_MODE,
 
 	/* keep last */
 	__NL80211_KEY_AFTER_LAST,
@@ -5335,6 +5406,8 @@ enum nl80211_feature_flags {
  *      able to rekey an in-use key correctly. Userspace must not rekey PTK keys
  *      if this flag is not set. Ignoring this can leak clear text packets and/or
  *      freeze the connection.
+ * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for
+ *      Individually Addressed Frames" from IEEE802.11-2016.
  *
  * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime
  *	fairness for transmitted packets and has enabled airtime fairness
@@ -5343,6 +5416,12 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
  *	(set/del PMKSA operations) in AP mode.
  *
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
+ *	filtering of sched scan results using band specific RSSI thresholds.
+ *
+ * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
+ *	to a station.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -5384,6 +5463,9 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
 	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
 	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
+	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+	NL80211_EXT_FEATURE_EXT_KEY_ID,
+	NL80211_EXT_FEATURE_STA_TX_PWR,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,