Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most interesting thing is probably the networking structs
  reorganization and a significant amount of changes is around
  self-tests.

  Core & protocols:

   - Analyze and reorganize core networking structs (socks, netdev,
     netns, mibs) to optimize cacheline consumption and set up build
     time warnings to safeguard against future header changes

     This improves TCP performances with many concurrent connections up
     to 40%

   - Add page-pool netlink-based introspection, exposing the memory
     usage and recycling stats. This helps indentify bad PP users and
     possible leaks

   - Refine TCP/DCCP source port selection to no longer favor even
     source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
     lowers the time taken by connect() for hosts having many active
     connections to the same destination

   - Refactor the TCP bind conflict code, shrinking related socket
     structs

   - Refactor TCP SYN-Cookie handling, as a preparation step to allow
     arbitrary SYN-Cookie processing via eBPF

   - Tune optmem_max for 0-copy usage, increasing the default value to
     128KB and namespecifying it

   - Allow coalescing for cloned skbs coming from page pools, improving
     RX performances with some common configurations

   - Reduce extension header parsing overhead at GRO time

   - Add bridge MDB bulk deletion support, allowing user-space to
     request the deletion of matching entries

   - Reorder nftables struct members, to keep data accessed by the
     datapath first

   - Introduce TC block ports tracking and use. This allows supporting
     multicast-like behavior at the TC layer

   - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
     classifiers (RSVP and tcindex)

   - More data-race annotations

   - Extend the diag interface to dump TCP bound-only sockets

   - Conditional notification of events for TC qdisc class and actions

   - Support for WPAN dynamic associations with nearby devices, to form
     a sub-network using a specific PAN ID

   - Implement SMCv2.1 virtual ISM device support

   - Add support for Batman-avd mulicast packet type

  BPF:

   - Tons of verifier improvements:
       - BPF register bounds logic and range support along with a large
         test suite
       - log improvements
       - complete precision tracking support for register spills
       - track aligned STACK_ZERO cases as imprecise spilled registers.
         This improves the verifier "instructions processed" metric from
         single digit to 50-60% for some programs
       - support for user's global BPF subprogram arguments with few
         commonly requested annotations for a better developer
         experience
       - support tracking of BPF_JNE which helps cases when the compiler
         transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
         like
       - several fixes

   - Add initial TX metadata implementation for AF_XDP with support in
     mlx5 and stmmac drivers. Two types of offloads are supported right
     now, that is, TX timestamp and TX checksum offload

   - Fix kCFI bugs in BPF all forms of indirect calls from BPF into
     kernel and from kernel into BPF work with CFI enabled. This allows
     BPF to work with CONFIG_FINEIBT=y

   - Change BPF verifier logic to validate global subprograms lazily
     instead of unconditionally before the main program, so they can be
     guarded using BPF CO-RE techniques

   - Support uid/gid options when mounting bpffs

   - Add a new kfunc which acquires the associated cgroup of a task
     within a specific cgroup v1 hierarchy where the latter is
     identified by its id

   - Extend verifier to allow bpf_refcount_acquire() of a map value
     field obtained via direct load which is a use-case needed in
     sched_ext

   - Add BPF link_info support for uprobe multi link along with bpftool
     integration for the latter

   - Support for VLAN tag in XDP hints

   - Remove deprecated bpfilter kernel leftovers given the project is
     developed in user-space (https://github.com/facebook/bpfilter)

  Misc:

   - Support for parellel TC self-tests execution

   - Increase MPTCP self-tests coverage

   - Updated the bridge documentation, including several so-far
     undocumented features

   - Convert all the net self-tests to run in unique netns, to avoid
     random failures due to conflict and allow concurrent runs

   - Add TCP-AO self-tests

   - Add kunit tests for both cfg80211 and mac80211

   - Autogenerate Netlink families documentation from YAML spec

   - Add yml-gen support for fixed headers and recursive nests, the tool
     can now generate user-space code for all genetlink families for
     which we have specs

   - A bunch of additional module descriptions fixes

   - Catch incorrect freeing of pages belonging to a page pool

  Driver API:

   - Rust abstractions for network PHY drivers; do not cover yet the
     full C API, but already allow implementing functional PHY drivers
     in rust

   - Introduce queue and NAPI support in the netdev Netlink interface,
     allowing complete access to the device <> NAPIs <> queues
     relationship

   - Introduce notifications filtering for devlink to allow control
     application scale to thousands of instances

   - Improve PHY validation, requesting rate matching information for
     each ethtool link mode supported by both the PHY and host

   - Add support for ethtool symmetric-xor RSS hash

   - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
     platform

   - Expose pin fractional frequency offset value over new DPLL generic
     netlink attribute

   - Convert older drivers to platform remove callback returning void

   - Add support for PHY package MMD read/write

  New hardware / drivers:

   - Ethernet:
       - Octeon CN10K devices
       - Broadcom 5760X P7
       - Qualcomm SM8550 SoC
       - Texas Instrument DP83TG720S PHY

   - Bluetooth:
       - IMC Networks Bluetooth radio

  Removed:

   - WiFi:
       - libertas 16-bit PCMCIA support
       - Atmel at76c50x drivers
       - HostAP ISA/PCMCIA style 802.11b driver
       - zd1201 802.11b USB dongles
       - Orinoco ISA/PCMCIA 802.11b driver
       - Aviator/Raytheon driver
       - Planet WL3501 driver
       - RNDIS USB 802.11b driver

  Driver updates:

   - Ethernet high-speed NICs:
       - Intel (100G, ice, idpf):
          - allow one by one port representors creation and removal
          - add temperature and clock information reporting
          - add get/set for ethtool's header split ringparam
          - add again FW logging
          - adds support switchdev hardware packet mirroring
          - iavf: implement symmetric-xor RSS hash
          - igc: add support for concurrent physical and free-running
            timers
          - i40e: increase the allowable descriptors
       - nVidia/Mellanox:
          - Preparation for Socket-Direct multi-dev netdev. That will
            allow in future releases combining multiple PFs devices
            attached to different NUMA nodes under the same netdev
       - Broadcom (bnxt):
          - TX completion handling improvements
          - add basic ntuple filter support
          - reduce MSIX vectors usage for MQPRIO offload
          - add VXLAN support, USO offload and TX coalesce completion
            for P7
       - Marvell Octeon EP:
          - xmit-more support
          - add PF-VF mailbox support and use it for FW notifications
            for VFs
       - Wangxun (ngbe/txgbe):
          - implement ethtool functions to operate pause param, ring
            param, coalesce channel number and msglevel
       - Netronome/Corigine (nfp):
          - add flow-steering support
          - support UDP segmentation offload

   - Ethernet NICs embedded, slower, virtual:
       - Xilinx AXI: remove duplicate DMA code adopting the dma engine
         driver
       - stmmac: add support for HW-accelerated VLAN stripping
       - TI AM654x sw: add mqprio, frame preemption & coalescing
       - gve: add support for non-4k page sizes.
       - virtio-net: support dynamic coalescing moderation

   - nVidia/Mellanox Ethernet datacenter switches:
       - allow firmware upgrade without a reboot
       - more flexible support for bridge flooding via the compressed
         FID flooding mode

   - Ethernet embedded switches:
       - Microchip:
          - fine-tune flow control and speed configurations in KSZ8xxx
          - KSZ88X3: enable setting rmii reference
       - Renesas:
          - add jumbo frames support
       - Marvell:
          - 88E6xxx: add "eth-mac" and "rmon" stats support

   - Ethernet PHYs:
       - aquantia: add firmware load support
       - at803x: refactor the driver to simplify adding support for more
         chip variants
       - NXP C45 TJA11xx: Add MACsec offload support

   - Wifi:
       - MediaTek (mt76):
          - NVMEM EEPROM improvements
          - mt7996 Extremely High Throughput (EHT) improvements
          - mt7996 Wireless Ethernet Dispatcher (WED) support
          - mt7996 36-bit DMA support
       - Qualcomm (ath12k):
          - support for a single MSI vector
          - WCN7850: support AP mode
       - Intel (iwlwifi):
          - new debugfs file fw_dbg_clear
          - allow concurrent P2P operation on DFS channels

   - Bluetooth:
       - QCA2066: support HFP offload
       - ISO: more broadcast-related improvements
       - NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
  lan78xx: remove redundant statement in lan78xx_get_eee
  lan743x: remove redundant statement in lan743x_ethtool_get_eee
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
  bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
  tcp: Revert no longer abort SYN_SENT when receiving some ICMP
  Revert "mlx5 updates 2023-12-20"
  Revert "net: stmmac: Enable Per DMA Channel interrupt"
  ipvlan: Remove usage of the deprecated ida_simple_xx() API
  ipvlan: Fix a typo in a comment
  net/sched: Remove ipt action tests
  net: stmmac: Use interrupt mode INTM=1 for per channel irq
  net: stmmac: Add support for TX/RX channel interrupt
  net: stmmac: Make MSI interrupt routine generic
  dt-bindings: net: snps,dwmac: per channel irq
  net: phy: at803x: make read_status more generic
  net: phy: at803x: add support for cdt cross short test for qca808x
  net: phy: at803x: refactor qca808x cable test get status function
  net: phy: at803x: generalize cdt fault length function
  net: ethernet: cortina: Drop TSO support
  ...

20 files changed, 901 insertions, 284 deletions

diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h
index 9204e4494b25..6e25753015df 100644
--- a/include/uapi/linux/batadv_packet.h
+++ b/include/uapi/linux/batadv_packet.h
@@ -116,6 +116,9 @@ enum batadv_icmp_packettype {
  * only need routable IPv4 multicast packets we signed up for explicitly
  * @BATADV_MCAST_WANT_NO_RTR6: we have no IPv6 multicast router and therefore
  * only need routable IPv6 multicast packets we signed up for explicitly
+ * @BATADV_MCAST_HAVE_MC_PTYPE_CAPA: we can parse, receive and forward
+ * batman-adv multicast packets with a multicast tracker TVLV. And all our
+ * hard interfaces have an MTU of at least 1280 bytes.
  */
 enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_UNSNOOPABLES	= 1UL << 0,
@@ -123,6 +126,7 @@ enum batadv_mcast_flags {
 	BATADV_MCAST_WANT_ALL_IPV6		= 1UL << 2,
 	BATADV_MCAST_WANT_NO_RTR4		= 1UL << 3,
 	BATADV_MCAST_WANT_NO_RTR6		= 1UL << 4,
+	BATADV_MCAST_HAVE_MC_PTYPE_CAPA		= 1UL << 5,
 };
 
 /* tt data subtypes */
@@ -174,14 +178,16 @@ enum batadv_bla_claimframe {
  * @BATADV_TVLV_TT: translation table tvlv
  * @BATADV_TVLV_ROAM: roaming advertisement tvlv
  * @BATADV_TVLV_MCAST: multicast capability tvlv
+ * @BATADV_TVLV_MCAST_TRACKER: multicast tracker tvlv
  */
 enum batadv_tvlv_type {
-	BATADV_TVLV_GW		= 0x01,
-	BATADV_TVLV_DAT		= 0x02,
-	BATADV_TVLV_NC		= 0x03,
-	BATADV_TVLV_TT		= 0x04,
-	BATADV_TVLV_ROAM	= 0x05,
-	BATADV_TVLV_MCAST	= 0x06,
+	BATADV_TVLV_GW			= 0x01,
+	BATADV_TVLV_DAT			= 0x02,
+	BATADV_TVLV_NC			= 0x03,
+	BATADV_TVLV_TT			= 0x04,
+	BATADV_TVLV_ROAM		= 0x05,
+	BATADV_TVLV_MCAST		= 0x06,
+	BATADV_TVLV_MCAST_TRACKER	= 0x07,
 };
 
 #pragma pack(2)
@@ -488,6 +494,25 @@ struct batadv_bcast_packet {
 };
 
 /**
+ * struct batadv_mcast_packet - multicast packet for network payload
+ * @packet_type: batman-adv packet type, part of the general header
+ * @version: batman-adv protocol version, part of the general header
+ * @ttl: time to live for this packet, part of the general header
+ * @reserved: reserved byte for alignment
+ * @tvlv_len: length of the appended tvlv buffer (in bytes)
+ */
+struct batadv_mcast_packet {
+	__u8 packet_type;
+	__u8 version;
+	__u8 ttl;
+	__u8 reserved;
+	__be16 tvlv_len;
+	/* "4 bytes boundary + 2 bytes" long to make the payload after the
+	 * following ethernet header again 4 bytes boundary aligned
+	 */
+};
+
+/**
  * struct batadv_coded_packet - network coded packet
  * @packet_type: batman-adv packet type, part of the general header
  * @version: batman-adv protocol version, part of the general header
@@ -628,6 +653,14 @@ struct batadv_tvlv_mcast_data {
 	__u8 reserved[3];
 };
 
+/**
+ * struct batadv_tvlv_mcast_tracker - payload of a multicast tracker tvlv
+ * @num_dests: number of subsequent destination originator MAC addresses
+ */
+struct batadv_tvlv_mcast_tracker {
+	__be16	num_dests;
+};
+
 #pragma pack()
 
 #endif /* _UAPI_LINUX_BATADV_PACKET_H_ */
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 0f6cdf52b1da..754e68ca8744 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -1074,9 +1074,11 @@ enum bpf_link_type {
 	BPF_LINK_TYPE_TCX = 11,
 	BPF_LINK_TYPE_UPROBE_MULTI = 12,
 	BPF_LINK_TYPE_NETKIT = 13,
-	MAX_BPF_LINK_TYPE,
+	__MAX_BPF_LINK_TYPE,
 };
 
+#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
+
 enum bpf_perf_event_type {
 	BPF_PERF_EVENT_UNSPEC = 0,
 	BPF_PERF_EVENT_UPROBE = 1,
@@ -1200,6 +1202,9 @@ enum bpf_perf_event_type {
  */
 #define BPF_F_XDP_DEV_BOUND_ONLY	(1U << 6)
 
+/* The verifier internal test flag. Behavior is undefined */
+#define BPF_F_TEST_REG_INVARIANTS	(1U << 7)
+
 /* link_create.kprobe_multi.flags used in LINK_CREATE command for
  * BPF_TRACE_KPROBE_MULTI attach type to create return probe.
  */
@@ -4517,6 +4522,8 @@ union bpf_attr {
  * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
  *	Description
  *		Return a user or a kernel stack in bpf program provided buffer.
+ *		Note: the user stack will only be populated if the *task* is
+ *		the current task; all other tasks will return -EOPNOTSUPP.
  *		To achieve this, the helper needs *task*, which is a valid
  *		pointer to **struct task_struct**. To store the stacktrace, the
  *		bpf program provides *buf* with a nonnegative *size*.
@@ -4528,6 +4535,7 @@ union bpf_attr {
  *
  *		**BPF_F_USER_STACK**
  *			Collect a user space stack instead of a kernel stack.
+ *			The *task* must be the current task.
  *		**BPF_F_USER_BUILD_ID**
  *			Collect buildid+offset instead of ips for user stack,
  *			only valid if **BPF_F_USER_STACK** is also specified.
@@ -6557,6 +6565,16 @@ struct bpf_link_info {
 			__u64 missed;
 		} kprobe_multi;
 		struct {
+			__aligned_u64 path;
+			__aligned_u64 offsets;
+			__aligned_u64 ref_ctr_offsets;
+			__aligned_u64 cookies;
+			__u32 path_size; /* in/out: real path size on success, including zero byte */
+			__u32 count; /* in/out: uprobe_multi offsets/ref_ctr_offsets/cookies count */
+			__u32 flags;
+			__u32 pid;
+		} uprobe_multi;
+		struct {
 			__u32 type; /* enum bpf_perf_event_type */
 			__u32 :32;
 			union {
@@ -6886,6 +6904,7 @@ enum {
 	BPF_TCP_LISTEN,
 	BPF_TCP_CLOSING,	/* Now a valid state */
 	BPF_TCP_NEW_SYN_RECV,
+	BPF_TCP_BOUND_INACTIVE,
 
 	BPF_TCP_MAX_STATES	/* Leave at the end! */
 };
@@ -7151,40 +7170,31 @@ struct bpf_spin_lock {
 };
 
 struct bpf_timer {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_dynptr {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_list_head {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_list_node {
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[3];
 } __attribute__((aligned(8)));
 
 struct bpf_rb_root {
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[2];
 } __attribute__((aligned(8)));
 
 struct bpf_rb_node {
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
-	__u64 :64;
+	__u64 __opaque[4];
 } __attribute__((aligned(8)));
 
 struct bpf_refcount {
-	__u32 :32;
+	__u32 __opaque[1];
 } __attribute__((aligned(4)));
 
 struct bpf_sysctl {
diff --git a/include/uapi/linux/bpfilter.h b/include/uapi/linux/bpfilter.h
deleted file mode 100644
index cbc1f5813f50..000000000000
--- a/include/uapi/linux/bpfilter.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef _UAPI_LINUX_BPFILTER_H
-#define _UAPI_LINUX_BPFILTER_H
-
-#include <linux/if.h>
-
-enum {
-	BPFILTER_IPT_SO_SET_REPLACE = 64,
-	BPFILTER_IPT_SO_SET_ADD_COUNTERS = 65,
-	BPFILTER_IPT_SET_MAX,
-};
-
-enum {
-	BPFILTER_IPT_SO_GET_INFO = 64,
-	BPFILTER_IPT_SO_GET_ENTRIES = 65,
-	BPFILTER_IPT_SO_GET_REVISION_MATCH = 66,
-	BPFILTER_IPT_SO_GET_REVISION_TARGET = 67,
-	BPFILTER_IPT_GET_MAX,
-};
-
-#endif /* _UAPI_LINUX_BPFILTER_H */
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index b3c8383d342d..130cae0d3e20 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -139,6 +139,8 @@ enum devlink_command {
 	DEVLINK_CMD_SELFTESTS_GET,	/* can dump */
 	DEVLINK_CMD_SELFTESTS_RUN,
 
+	DEVLINK_CMD_NOTIFY_FILTER_SET,
+
 	/* add new commands above here */
 	__DEVLINK_CMD_MAX,
 	DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index 715a491d2727..b4e947f9bfbc 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -179,6 +179,7 @@ enum dpll_a_pin {
 	DPLL_A_PIN_PHASE_ADJUST_MAX,
 	DPLL_A_PIN_PHASE_ADJUST,
 	DPLL_A_PIN_PHASE_OFFSET,
+	DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET,
 
 	__DPLL_A_PIN_MAX,
 	DPLL_A_PIN_MAX = (__DPLL_A_PIN_MAX - 1)
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index f7fba0dc87e5..06ef6b78b7de 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1266,6 +1266,8 @@ struct ethtool_rxfh_indir {
  *	hardware hash key.
  * @hfunc: Defines the current RSS hash function used by HW (or to be set to).
  *	Valid values are one of the %ETH_RSS_HASH_*.
+ * @input_xfrm: Defines how the input data is transformed. Valid values are one
+ *	of %RXH_XFRM_*.
  * @rsvd8: Reserved for future use; see the note on reserved space.
  * @rsvd32: Reserved for future use; see the note on reserved space.
  * @rss_config: RX ring/queue index for each hash value i.e., indirection table
@@ -1285,7 +1287,8 @@ struct ethtool_rxfh {
 	__u32   indir_size;
 	__u32   key_size;
 	__u8	hfunc;
-	__u8	rsvd8[3];
+	__u8	input_xfrm;
+	__u8	rsvd8[2];
 	__u32	rsvd32;
 	__u32   rss_config[];
 };
@@ -1992,6 +1995,15 @@ static inline int ethtool_validate_duplex(__u8 duplex)
 
 #define WOL_MODE_COUNT		8
 
+/* RSS hash function data
+ * XOR the corresponding source and destination fields of each specified
+ * protocol. Both copies of the XOR'ed fields are fed into the RSS and RXHASH
+ * calculation. Note that this XORing reduces the input set entropy and could
+ * be exploited to reduce the RSS queue spread.
+ */
+#define	RXH_XFRM_SYM_XOR	(1 << 0)
+#define	RXH_XFRM_NO_CHANGE	0xff
+
 /* L2-L4 network traffic flow types */
 #define	TCP_V4_FLOW	0x01	/* hash or spec (tcp_ip4_spec) */
 #define	UDP_V4_FLOW	0x02	/* hash or spec (udp_ip4_spec) */
@@ -2128,18 +2140,6 @@ enum ethtool_reset_flags {
  *	refused. For drivers: ignore this field (use kernel's
  *	__ETHTOOL_LINK_MODE_MASK_NBITS instead), any change to it will
  *	be overwritten by kernel.
- * @supported: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features for which the interface
- *	supports autonegotiation or auto-detection.  Read-only.
- * @advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, physical
- *	connectors and other link features that are advertised through
- *	autonegotiation or enabled for auto-detection.
- * @lp_advertising: Bitmap with each bit meaning given by
- *	%ethtool_link_mode_bit_indices for the link modes, and other
- *	link features that the link partner advertised through
- *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  * @transceiver: Used to distinguish different possible PHY types,
  *	reported consistently by PHYLIB.  Read-only.
  * @master_slave_cfg: Master/slave port mode.
@@ -2181,6 +2181,21 @@ enum ethtool_reset_flags {
  * %set_link_ksettings() should validate all fields other than @cmd
  * and @link_mode_masks_nwords that are not described as read-only or
  * deprecated, and must ignore all fields described as read-only.
+ *
+ * @link_mode_masks is divided into three bitfields, each of length
+ * @link_mode_masks_nwords:
+ * - supported: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features for which the interface
+ *	supports autonegotiation or auto-detection.  Read-only.
+ * - advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, physical
+ *	connectors and other link features that are advertised through
+ *	autonegotiation or enabled for auto-detection.
+ * - lp_advertising: Bitmap with each bit meaning given by
+ *	%ethtool_link_mode_bit_indices for the link modes, and other
+ *	link features that the link partner advertised through
+ *	autonegotiation; 0 if unknown or not applicable.  Read-only.
  */
 struct ethtool_link_settings {
 	__u32	cmd;
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 73e2c10dc2cc..3f89074aa06c 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -908,6 +908,7 @@ enum {
 	ETHTOOL_A_RSS_HFUNC,		/* u32 */
 	ETHTOOL_A_RSS_INDIR,		/* binary */
 	ETHTOOL_A_RSS_HKEY,		/* binary */
+	ETHTOOL_A_RSS_INPUT_XFRM,	/* u32 */
 
 	__ETHTOOL_A_RSS_CNT,
 	ETHTOOL_A_RSS_MAX = (__ETHTOOL_A_RSS_CNT - 1),
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index 2e23f99dc0f1..a5b743a2f775 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -757,6 +757,7 @@ enum {
 	MDBE_ATTR_VNI,
 	MDBE_ATTR_IFINDEX,
 	MDBE_ATTR_SRC_VNI,
+	MDBE_ATTR_STATE_MASK,
 	__MDBE_ATTR_MAX,
 };
 #define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 29ff80da2775..ab9bcff96e4d 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -461,6 +461,286 @@ enum in6_addr_gen_mode {
 
 /* Bridge section */
 
+/**
+ * DOC: Bridge enum definition
+ *
+ * Please *note* that the timer values in the following section are expected
+ * in clock_t format, which is seconds multiplied by USER_HZ (generally
+ * defined as 100).
+ *
+ * @IFLA_BR_FORWARD_DELAY
+ *   The bridge forwarding delay is the time spent in LISTENING state
+ *   (before moving to LEARNING) and in LEARNING state (before moving
+ *   to FORWARDING). Only relevant if STP is enabled.
+ *
+ *   The valid values are between (2 * USER_HZ) and (30 * USER_HZ).
+ *   The default value is (15 * USER_HZ).
+ *
+ * @IFLA_BR_HELLO_TIME
+ *   The time between hello packets sent by the bridge, when it is a root
+ *   bridge or a designated bridge. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (1 * USER_HZ) and (10 * USER_HZ).
+ *   The default value is (2 * USER_HZ).
+ *
+ * @IFLA_BR_MAX_AGE
+ *   The hello packet timeout is the time until another bridge in the
+ *   spanning tree is assumed to be dead, after reception of its last hello
+ *   message. Only relevant if STP is enabled.
+ *
+ *   The valid values are between (6 * USER_HZ) and (40 * USER_HZ).
+ *   The default value is (20 * USER_HZ).
+ *
+ * @IFLA_BR_AGEING_TIME
+ *   Configure the bridge's FDB entries aging time. It is the time a MAC
+ *   address will be kept in the FDB after a packet has been received from
+ *   that address. After this time has passed, entries are cleaned up.
+ *   Allow values outside the 802.1 standard specification for special cases:
+ *
+ *     * 0 - entry never ages (all permanent)
+ *     * 1 - entry disappears (no persistence)
+ *
+ *   The default value is (300 * USER_HZ).
+ *
+ * @IFLA_BR_STP_STATE
+ *   Turn spanning tree protocol on (*IFLA_BR_STP_STATE* > 0) or off
+ *   (*IFLA_BR_STP_STATE* == 0) for this bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_PRIORITY
+ *   Set this bridge's spanning tree priority, used during STP root bridge
+ *   election.
+ *
+ *   The valid values are between 0 and 65535.
+ *
+ * @IFLA_BR_VLAN_FILTERING
+ *   Turn VLAN filtering on (*IFLA_BR_VLAN_FILTERING* > 0) or off
+ *   (*IFLA_BR_VLAN_FILTERING* == 0). When disabled, the bridge will not
+ *   consider the VLAN tag when handling packets.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_PROTOCOL
+ *   Set the protocol used for VLAN filtering.
+ *
+ *   The valid values are 0x8100(802.1Q) or 0x88A8(802.1AD). The default value
+ *   is 0x8100(802.1Q).
+ *
+ * @IFLA_BR_GROUP_FWD_MASK
+ *   The group forwarding mask. This is the bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses (of the form 01:80:C2:00:00:0X).
+ *
+ *   The default value is 0, which means the bridge does not forward any
+ *   link-local frames coming on this port.
+ *
+ * @IFLA_BR_ROOT_ID
+ *   The bridge root id, read only.
+ *
+ * @IFLA_BR_BRIDGE_ID
+ *   The bridge id, read only.
+ *
+ * @IFLA_BR_ROOT_PORT
+ *   The bridge root port, read only.
+ *
+ * @IFLA_BR_ROOT_PATH_COST
+ *   The bridge root path cost, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE
+ *   The bridge topology change, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_DETECTED
+ *   The bridge topology change detected, read only.
+ *
+ * @IFLA_BR_HELLO_TIMER
+ *   The bridge hello timer, read only.
+ *
+ * @IFLA_BR_TCN_TIMER
+ *   The bridge tcn timer, read only.
+ *
+ * @IFLA_BR_TOPOLOGY_CHANGE_TIMER
+ *   The bridge topology change timer, read only.
+ *
+ * @IFLA_BR_GC_TIMER
+ *   The bridge gc timer, read only.
+ *
+ * @IFLA_BR_GROUP_ADDR
+ *   Set the MAC address of the multicast group this bridge uses for STP.
+ *   The address must be a link-local address in standard Ethernet MAC address
+ *   format. It is an address of the form 01:80:C2:00:00:0X, with X in [0, 4..f].
+ *
+ *   The default value is 0.
+ *
+ * @IFLA_BR_FDB_FLUSH
+ *   Flush bridge's fdb dynamic entries.
+ *
+ * @IFLA_BR_MCAST_ROUTER
+ *   Set bridge's multicast router if IGMP snooping is enabled.
+ *   The valid values are:
+ *
+ *     * 0 - disabled.
+ *     * 1 - automatic (queried).
+ *     * 2 - permanently enabled.
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_SNOOPING
+ *   Turn multicast snooping on (*IFLA_BR_MCAST_SNOOPING* > 0) or off
+ *   (*IFLA_BR_MCAST_SNOOPING* == 0).
+ *
+ *   The default value is 1.
+ *
+ * @IFLA_BR_MCAST_QUERY_USE_IFADDR
+ *   If enabled use the bridge's own IP address as source address for IGMP
+ *   queries (*IFLA_BR_MCAST_QUERY_USE_IFADDR* > 0) or the default of 0.0.0.0
+ *   (*IFLA_BR_MCAST_QUERY_USE_IFADDR* == 0).
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_QUERIER
+ *   Enable (*IFLA_BR_MULTICAST_QUERIER* > 0) or disable
+ *   (*IFLA_BR_MULTICAST_QUERIER* == 0) IGMP querier, ie sending of multicast
+ *   queries by the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_HASH_ELASTICITY
+ *   Set multicast database hash elasticity, It is the maximum chain length in
+ *   the multicast hash table. This attribute is *deprecated* and the value
+ *   is always 16.
+ *
+ * @IFLA_BR_MCAST_HASH_MAX
+ *   Set maximum size of the multicast hash table
+ *
+ *   The default value is 4096, the value must be a power of 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_CNT
+ *   The Last Member Query Count is the number of Group-Specific Queries
+ *   sent before the router assumes there are no local members. The Last
+ *   Member Query Count is also the number of Group-and-Source-Specific
+ *   Queries sent before the router assumes there are no listeners for a
+ *   particular source.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_CNT
+ *   The Startup Query Count is the number of Queries sent out on startup,
+ *   separated by the Startup Query Interval.
+ *
+ *   The default value is 2.
+ *
+ * @IFLA_BR_MCAST_LAST_MEMBER_INTVL
+ *   The Last Member Query Interval is the Max Response Time inserted into
+ *   Group-Specific Queries sent in response to Leave Group messages, and
+ *   is also the amount of time between Group-Specific Query messages.
+ *
+ *   The default value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_MEMBERSHIP_INTVL
+ *   The interval after which the bridge will leave a group, if no membership
+ *   reports for this group are received.
+ *
+ *   The default value is (260 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERIER_INTVL
+ *   The interval between queries sent by other routers. if no queries are
+ *   seen after this delay has passed, the bridge will start to send its own
+ *   queries (as if *IFLA_BR_MCAST_QUERIER_INTVL* was enabled).
+ *
+ *   The default value is (255 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_INTVL
+ *   The Query Interval is the interval between General Queries sent by
+ *   the Querier.
+ *
+ *   The default value is (125 * USER_HZ). The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_QUERY_RESPONSE_INTVL
+ *   The Max Response Time used to calculate the Max Resp Code inserted
+ *   into the periodic General Queries.
+ *
+ *   The default value is (10 * USER_HZ).
+ *
+ * @IFLA_BR_MCAST_STARTUP_QUERY_INTVL
+ *   The interval between queries in the startup phase.
+ *
+ *   The default value is (125 * USER_HZ) / 4. The minimum value is (1 * USER_HZ).
+ *
+ * @IFLA_BR_NF_CALL_IPTABLES
+ *   Enable (*NF_CALL_IPTABLES* > 0) or disable (*NF_CALL_IPTABLES* == 0)
+ *   iptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_IP6TABLES
+ *   Enable (*NF_CALL_IP6TABLES* > 0) or disable (*NF_CALL_IP6TABLES* == 0)
+ *   ip6tables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_NF_CALL_ARPTABLES
+ *   Enable (*NF_CALL_ARPTABLES* > 0) or disable (*NF_CALL_ARPTABLES* == 0)
+ *   arptables hooks on the bridge.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_VLAN_DEFAULT_PVID
+ *   VLAN ID applied to untagged and priority-tagged incoming packets.
+ *
+ *   The default value is 1. Setting to the special value 0 makes all ports of
+ *   this bridge not have a PVID by default, which means that they will
+ *   not accept VLAN-untagged traffic.
+ *
+ * @IFLA_BR_PAD
+ *   Bridge attribute padding type for netlink message.
+ *
+ * @IFLA_BR_VLAN_STATS_ENABLED
+ *   Enable (*IFLA_BR_VLAN_STATS_ENABLED* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_ENABLED* == 0) per-VLAN stats accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_STATS_ENABLED
+ *   Enable (*IFLA_BR_MCAST_STATS_ENABLED* > 0) or disable
+ *   (*IFLA_BR_MCAST_STATS_ENABLED* == 0) multicast (IGMP/MLD) stats
+ *   accounting.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MCAST_IGMP_VERSION
+ *   Set the IGMP version.
+ *
+ *   The valid values are 2 and 3. The default value is 2.
+ *
+ * @IFLA_BR_MCAST_MLD_VERSION
+ *   Set the MLD version.
+ *
+ *   The valid values are 1 and 2. The default value is 1.
+ *
+ * @IFLA_BR_VLAN_STATS_PER_PORT
+ *   Enable (*IFLA_BR_VLAN_STATS_PER_PORT* == 1) or disable
+ *   (*IFLA_BR_VLAN_STATS_PER_PORT* == 0) per-VLAN per-port stats accounting.
+ *   Can be changed only when there are no port VLANs configured.
+ *
+ *   The default value is 0 (disabled).
+ *
+ * @IFLA_BR_MULTI_BOOLOPT
+ *   The multi_boolopt is used to control new boolean options to avoid adding
+ *   new netlink attributes. You can look at ``enum br_boolopt_id`` for those
+ *   options.
+ *
+ * @IFLA_BR_MCAST_QUERIER_STATE
+ *   Bridge mcast querier states, read only.
+ *
+ * @IFLA_BR_FDB_N_LEARNED
+ *   The number of dynamically learned FDB entries for the current bridge,
+ *   read only.
+ *
+ * @IFLA_BR_FDB_MAX_LEARNED
+ *   Set the number of max dynamically learned FDB entries for the current
+ *   bridge.
+ */
 enum {
 	IFLA_BR_UNSPEC,
 	IFLA_BR_FORWARD_DELAY,
@@ -522,11 +802,252 @@ struct ifla_bridge_id {
 	__u8	addr[6]; /* ETH_ALEN */
 };
 
+/**
+ * DOC: Bridge mode enum definition
+ *
+ * @BRIDGE_MODE_HAIRPIN
+ *   Controls whether traffic may be sent back out of the port on which it
+ *   was received. This option is also called reflective relay mode, and is
+ *   used to support basic VEPA (Virtual Ethernet Port Aggregator)
+ *   capabilities. By default, this flag is turned off and the bridge will
+ *   not forward traffic back out of the receiving port.
+ */
 enum {
 	BRIDGE_MODE_UNSPEC,
 	BRIDGE_MODE_HAIRPIN,
 };
 
+/**
+ * DOC: Bridge port enum definition
+ *
+ * @IFLA_BRPORT_STATE
+ *   The operation state of the port. Here are the valid values.
+ *
+ *     * 0 - port is in STP *DISABLED* state. Make this port completely
+ *       inactive for STP. This is also called BPDU filter and could be used
+ *       to disable STP on an untrusted port, like a leaf virtual device.
+ *       The traffic forwarding is also stopped on this port.
+ *     * 1 - port is in STP *LISTENING* state. Only valid if STP is enabled
+ *       on the bridge. In this state the port listens for STP BPDUs and
+ *       drops all other traffic frames.
+ *     * 2 - port is in STP *LEARNING* state. Only valid if STP is enabled on
+ *       the bridge. In this state the port will accept traffic only for the
+ *       purpose of updating MAC address tables.
+ *     * 3 - port is in STP *FORWARDING* state. Port is fully active.
+ *     * 4 - port is in STP *BLOCKING* state. Only valid if STP is enabled on
+ *       the bridge. This state is used during the STP election process.
+ *       In this state, port will only process STP BPDUs.
+ *
+ * @IFLA_BRPORT_PRIORITY
+ *   The STP port priority. The valid values are between 0 and 255.
+ *
+ * @IFLA_BRPORT_COST
+ *   The STP path cost of the port. The valid values are between 1 and 65535.
+ *
+ * @IFLA_BRPORT_MODE
+ *   Set the bridge port mode. See *BRIDGE_MODE_HAIRPIN* for more details.
+ *
+ * @IFLA_BRPORT_GUARD
+ *   Controls whether STP BPDUs will be processed by the bridge port. By
+ *   default, the flag is turned off to allow BPDU processing. Turning this
+ *   flag on will disable the bridge port if a STP BPDU packet is received.
+ *
+ *   If the bridge has Spanning Tree enabled, hostile devices on the network
+ *   may send BPDU on a port and cause network failure. Setting *guard on*
+ *   will detect and stop this by disabling the port. The port will be
+ *   restarted if the link is brought down, or removed and reattached.
+ *
+ * @IFLA_BRPORT_PROTECT
+ *   Controls whether a given port is allowed to become a root port or not.
+ *   Only used when STP is enabled on the bridge. By default the flag is off.
+ *
+ *   This feature is also called root port guard. If BPDU is received from a
+ *   leaf (edge) port, it should not be elected as root port. This could
+ *   be used if using STP on a bridge and the downstream bridges are not fully
+ *   trusted; this prevents a hostile guest from rerouting traffic.
+ *
+ * @IFLA_BRPORT_FAST_LEAVE
+ *   This flag allows the bridge to immediately stop multicast traffic
+ *   forwarding on a port that receives an IGMP Leave message. It is only used
+ *   when IGMP snooping is enabled on the bridge. By default the flag is off.
+ *
+ * @IFLA_BRPORT_LEARNING
+ *   Controls whether a given port will learn *source* MAC addresses from
+ *   received traffic or not. Also controls whether dynamic FDB entries
+ *   (which can also be added by software) will be refreshed by incoming
+ *   traffic. By default this flag is on.
+ *
+ * @IFLA_BRPORT_UNICAST_FLOOD
+ *   Controls whether unicast traffic for which there is no FDB entry will
+ *   be flooded towards this port. By default this flag is on.
+ *
+ * @IFLA_BRPORT_PROXYARP
+ *   Enable proxy ARP on this port.
+ *
+ * @IFLA_BRPORT_LEARNING_SYNC
+ *   Controls whether a given port will sync MAC addresses learned on device
+ *   port to bridge FDB.
+ *
+ * @IFLA_BRPORT_PROXYARP_WIFI
+ *   Enable proxy ARP on this port which meets extended requirements by
+ *   IEEE 802.11 and Hotspot 2.0 specifications.
+ *
+ * @IFLA_BRPORT_ROOT_ID
+ *
+ * @IFLA_BRPORT_BRIDGE_ID
+ *
+ * @IFLA_BRPORT_DESIGNATED_PORT
+ *
+ * @IFLA_BRPORT_DESIGNATED_COST
+ *
+ * @IFLA_BRPORT_ID
+ *
+ * @IFLA_BRPORT_NO
+ *
+ * @IFLA_BRPORT_TOPOLOGY_CHANGE_ACK
+ *
+ * @IFLA_BRPORT_CONFIG_PENDING
+ *
+ * @IFLA_BRPORT_MESSAGE_AGE_TIMER
+ *
+ * @IFLA_BRPORT_FORWARD_DELAY_TIMER
+ *
+ * @IFLA_BRPORT_HOLD_TIMER
+ *
+ * @IFLA_BRPORT_FLUSH
+ *   Flush bridge ports' fdb dynamic entries.
+ *
+ * @IFLA_BRPORT_MULTICAST_ROUTER
+ *   Configure the port's multicast router presence. A port with
+ *   a multicast router will receive all multicast traffic.
+ *   The valid values are:
+ *
+ *     * 0 disable multicast routers on this port
+ *     * 1 let the system detect the presence of routers (default)
+ *     * 2 permanently enable multicast traffic forwarding on this port
+ *     * 3 enable multicast routers temporarily on this port, not depending
+ *         on incoming queries.
+ *
+ * @IFLA_BRPORT_PAD
+ *
+ * @IFLA_BRPORT_MCAST_FLOOD
+ *   Controls whether a given port will flood multicast traffic for which
+ *   there is no MDB entry. By default this flag is on.
+ *
+ * @IFLA_BRPORT_MCAST_TO_UCAST
+ *   Controls whether a given port will replicate packets using unicast
+ *   instead of multicast. By default this flag is off.
+ *
+ *   This is done by copying the packet per host and changing the multicast
+ *   destination MAC to a unicast one accordingly.
+ *
+ *   *mcast_to_unicast* works on top of the multicast snooping feature of the
+ *   bridge. Which means unicast copies are only delivered to hosts which
+ *   are interested in unicast and signaled this via IGMP/MLD reports previously.
+ *
+ *   This feature is intended for interface types which have a more reliable
+ *   and/or efficient way to deliver unicast packets than broadcast ones
+ *   (e.g. WiFi).
+ *
+ *   However, it should only be enabled on interfaces where no IGMPv2/MLDv1
+ *   report suppression takes place. IGMP/MLD report suppression issue is
+ *   usually overcome by the network daemon (supplicant) enabling AP isolation
+ *   and by that separating all STAs.
+ *
+ *   Delivery of STA-to-STA IP multicast is made possible again by enabling
+ *   and utilizing the bridge hairpin mode, which considers the incoming port
+ *   as a potential outgoing port, too (see *BRIDGE_MODE_HAIRPIN* option).
+ *   Hairpin mode is performed after multicast snooping, therefore leading
+ *   to only deliver reports to STAs running a multicast router.
+ *
+ * @IFLA_BRPORT_VLAN_TUNNEL
+ *   Controls whether vlan to tunnel mapping is enabled on the port.
+ *   By default this flag is off.
+ *
+ * @IFLA_BRPORT_BCAST_FLOOD
+ *   Controls flooding of broadcast traffic on the given port. By default
+ *   this flag is on.
+ *
+ * @IFLA_BRPORT_GROUP_FWD_MASK
+ *   Set the group forward mask. This is a bitmask that is applied to
+ *   decide whether to forward incoming frames destined to link-local
+ *   addresses. The addresses of the form are 01:80:C2:00:00:0X (defaults
+ *   to 0, which means the bridge does not forward any link-local frames
+ *   coming on this port).
+ *
+ * @IFLA_BRPORT_NEIGH_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression
+ *   is enabled on the port. By default this flag is off.
+ *
+ * @IFLA_BRPORT_ISOLATED
+ *   Controls whether a given port will be isolated, which means it will be
+ *   able to communicate with non-isolated ports only. By default this
+ *   flag is off.
+ *
+ * @IFLA_BRPORT_BACKUP_PORT
+ *   Set a backup port. If the port loses carrier all traffic will be
+ *   redirected to the configured backup port. Set the value to 0 to disable
+ *   it.
+ *
+ * @IFLA_BRPORT_MRP_RING_OPEN
+ *
+ * @IFLA_BRPORT_MRP_IN_OPEN
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT
+ *   The number of per-port EHT hosts limit. The default value is 512.
+ *   Setting to 0 is not allowed.
+ *
+ * @IFLA_BRPORT_MCAST_EHT_HOSTS_CNT
+ *   The current number of tracked hosts, read only.
+ *
+ * @IFLA_BRPORT_LOCKED
+ *   Controls whether a port will be locked, meaning that hosts behind the
+ *   port will not be able to communicate through the port unless an FDB
+ *   entry with the unit's MAC address is in the FDB. The common use case is
+ *   that hosts are allowed access through authentication with the IEEE 802.1X
+ *   protocol or based on whitelists. By default this flag is off.
+ *
+ *   Please note that secure 802.1X deployments should always use the
+ *   *BR_BOOLOPT_NO_LL_LEARN* flag, to not permit the bridge to populate its
+ *   FDB based on link-local (EAPOL) traffic received on the port.
+ *
+ * @IFLA_BRPORT_MAB
+ *   Controls whether a port will use MAC Authentication Bypass (MAB), a
+ *   technique through which select MAC addresses may be allowed on a locked
+ *   port, without using 802.1X authentication. Packets with an unknown source
+ *   MAC address generates a "locked" FDB entry on the incoming bridge port.
+ *   The common use case is for user space to react to these bridge FDB
+ *   notifications and optionally replace the locked FDB entry with a normal
+ *   one, allowing traffic to pass for whitelisted MAC addresses.
+ *
+ *   Setting this flag also requires *IFLA_BRPORT_LOCKED* and
+ *   *IFLA_BRPORT_LEARNING*. *IFLA_BRPORT_LOCKED* ensures that unauthorized
+ *   data packets are dropped, and *IFLA_BRPORT_LEARNING* allows the dynamic
+ *   FDB entries installed by user space (as replacements for the locked FDB
+ *   entries) to be refreshed and/or aged out.
+ *
+ * @IFLA_BRPORT_MCAST_N_GROUPS
+ *
+ * @IFLA_BRPORT_MCAST_MAX_GROUPS
+ *   Sets the maximum number of MDB entries that can be registered for a
+ *   given port. Attempts to register more MDB entries at the port than this
+ *   limit allows will be rejected, whether they are done through netlink
+ *   (e.g. the bridge tool), or IGMP or MLD membership reports. Setting a
+ *   limit of 0 disables the limit. The default value is 0.
+ *
+ * @IFLA_BRPORT_NEIGH_VLAN_SUPPRESS
+ *   Controls whether neighbor discovery (arp and nd) proxy and suppression is
+ *   enabled for a given port. By default this flag is off.
+ *
+ *   Note that this option only takes effect when *IFLA_BRPORT_NEIGH_SUPPRESS*
+ *   is enabled for a given port.
+ *
+ * @IFLA_BRPORT_BACKUP_NHID
+ *   The FDB nexthop object ID to attach to packets being redirected to a
+ *   backup port that has VLAN tunnel mapping enabled (via the
+ *   *IFLA_BRPORT_VLAN_TUNNEL* option). Setting a value of 0 (default) has
+ *   the effect of not attaching any ID.
+ */
 enum {
 	IFLA_BRPORT_UNSPEC,
 	IFLA_BRPORT_STATE,	/* Spanning tree state     */
@@ -856,6 +1377,7 @@ enum {
 	IFLA_VXLAN_DF,
 	IFLA_VXLAN_VNIFILTER, /* only applicable with COLLECT_METADATA mode */
 	IFLA_VXLAN_LOCALBYPASS,
+	IFLA_VXLAN_LABEL_POLICY, /* IPv6 flow label policy; ifla_vxlan_label_policy */
 	__IFLA_VXLAN_MAX
 };
 #define IFLA_VXLAN_MAX	(__IFLA_VXLAN_MAX - 1)
@@ -873,6 +1395,13 @@ enum ifla_vxlan_df {
 	VXLAN_DF_MAX = __VXLAN_DF_END - 1,
 };
 
+enum ifla_vxlan_label_policy {
+	VXLAN_LABEL_FIXED = 0,
+	VXLAN_LABEL_INHERIT = 1,
+	__VXLAN_LABEL_END,
+	VXLAN_LABEL_MAX = __VXLAN_LABEL_END - 1,
+};
+
 /* GENEVE section */
 enum {
 	IFLA_GENEVE_UNSPEC,
diff --git a/include/uapi/linux/if_xdp.h b/include/uapi/linux/if_xdp.h
index 8d48863472b9..d31698410410 100644
--- a/include/uapi/linux/if_xdp.h
+++ b/include/uapi/linux/if_xdp.h
@@ -33,7 +33,13 @@
 #define XDP_USE_SG	(1 << 4)
 
 /* Flags for xsk_umem_config flags */
-#define XDP_UMEM_UNALIGNED_CHUNK_FLAG (1 << 0)
+#define XDP_UMEM_UNALIGNED_CHUNK_FLAG	(1 << 0)
+
+/* Force checksum calculation in software. Can be used for testing or
+ * working around potential HW issues. This option causes performance
+ * degradation and only works in XDP_COPY mode.
+ */
+#define XDP_UMEM_TX_SW_CSUM		(1 << 1)
 
 struct sockaddr_xdp {
 	__u16 sxdp_family;
@@ -76,6 +82,7 @@ struct xdp_umem_reg {
 	__u32 chunk_size;
 	__u32 headroom;
 	__u32 flags;
+	__u32 tx_metadata_len;
 };
 
 struct xdp_statistics {
@@ -105,6 +112,41 @@ struct xdp_options {
 #define XSK_UNALIGNED_BUF_ADDR_MASK \
 	((1ULL << XSK_UNALIGNED_BUF_OFFSET_SHIFT) - 1)
 
+/* Request transmit timestamp. Upon completion, put it into tx_timestamp
+ * field of struct xsk_tx_metadata.
+ */
+#define XDP_TXMD_FLAGS_TIMESTAMP		(1 << 0)
+
+/* Request transmit checksum offload. Checksum start position and offset
+ * are communicated via csum_start and csum_offset fields of struct
+ * xsk_tx_metadata.
+ */
+#define XDP_TXMD_FLAGS_CHECKSUM			(1 << 1)
+
+/* AF_XDP offloads request. 'request' union member is consumed by the driver
+ * when the packet is being transmitted. 'completion' union member is
+ * filled by the driver when the transmit completion arrives.
+ */
+struct xsk_tx_metadata {
+	__u64 flags;
+
+	union {
+		struct {
+			/* XDP_TXMD_FLAGS_CHECKSUM */
+
+			/* Offset from desc->addr where checksumming should start. */
+			__u16 csum_start;
+			/* Offset from csum_start where checksum should be stored. */
+			__u16 csum_offset;
+		} request;
+
+		struct {
+			/* XDP_TXMD_FLAGS_TIMESTAMP */
+			__u64 tx_timestamp;
+		} completion;
+	};
+};
+
 /* Rx/Tx descriptor */
 struct xdp_desc {
 	__u64 addr;
@@ -121,4 +163,7 @@ struct xdp_desc {
  */
 #define XDP_PKT_CONTD (1 << 0)
 
+/* TX packet carries valid metadata. */
+#define XDP_TX_METADATA (1 << 1)
+
 #endif /* _LINUX_IF_XDP_H */
diff --git a/include/uapi/linux/mptcp.h b/include/uapi/linux/mptcp.h
index a6451561f3f8..74cfe496891e 100644
--- a/include/uapi/linux/mptcp.h
+++ b/include/uapi/linux/mptcp.h
@@ -57,6 +57,7 @@ struct mptcp_info {
 	__u64	mptcpi_bytes_sent;
 	__u64	mptcpi_bytes_received;
 	__u64	mptcpi_bytes_acked;
+	__u8	mptcpi_subflows_total;
 };
 
 /* MPTCP Reset reason codes, rfc8684 */
diff --git a/include/uapi/linux/mptcp_pm.h b/include/uapi/linux/mptcp_pm.h
index b5d11aece408..50589e5dd6a3 100644
--- a/include/uapi/linux/mptcp_pm.h
+++ b/include/uapi/linux/mptcp_pm.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */
 /* Do not edit directly, auto-generated from: */
-/*	Documentation/netlink/specs/mptcp.yaml */
+/*	Documentation/netlink/specs/mptcp_pm.yaml */
 /* YNL-GEN uapi header */
 
 #ifndef _UAPI_LINUX_MPTCP_PM_H
diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h
index 2943a151d4f1..93cb411adf72 100644
--- a/include/uapi/linux/netdev.h
+++ b/include/uapi/linux/netdev.h
@@ -44,13 +44,30 @@ enum netdev_xdp_act {
  *   timestamp via bpf_xdp_metadata_rx_timestamp().
  * @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet
  *   hash via bpf_xdp_metadata_rx_hash().
+ * @NETDEV_XDP_RX_METADATA_VLAN_TAG: Device is capable of exposing receive
+ *   packet VLAN tag via bpf_xdp_metadata_rx_vlan_tag().
  */
 enum netdev_xdp_rx_metadata {
 	NETDEV_XDP_RX_METADATA_TIMESTAMP = 1,
 	NETDEV_XDP_RX_METADATA_HASH = 2,
+	NETDEV_XDP_RX_METADATA_VLAN_TAG = 4,
+};
 
-	/* private: */
-	NETDEV_XDP_RX_METADATA_MASK = 3,
+/**
+ * enum netdev_xsk_flags
+ * @NETDEV_XSK_FLAGS_TX_TIMESTAMP: HW timestamping egress packets is supported
+ *   by the driver.
+ * @NETDEV_XSK_FLAGS_TX_CHECKSUM: L3 checksum HW offload is supported by the
+ *   driver.
+ */
+enum netdev_xsk_flags {
+	NETDEV_XSK_FLAGS_TX_TIMESTAMP = 1,
+	NETDEV_XSK_FLAGS_TX_CHECKSUM = 2,
+};
+
+enum netdev_queue_type {
+	NETDEV_QUEUE_TYPE_RX,
+	NETDEV_QUEUE_TYPE_TX,
 };
 
 enum {
@@ -59,21 +76,80 @@ enum {
 	NETDEV_A_DEV_XDP_FEATURES,
 	NETDEV_A_DEV_XDP_ZC_MAX_SEGS,
 	NETDEV_A_DEV_XDP_RX_METADATA_FEATURES,
+	NETDEV_A_DEV_XSK_FEATURES,
 
 	__NETDEV_A_DEV_MAX,
 	NETDEV_A_DEV_MAX = (__NETDEV_A_DEV_MAX - 1)
 };
 
 enum {
+	NETDEV_A_PAGE_POOL_ID = 1,
+	NETDEV_A_PAGE_POOL_IFINDEX,
+	NETDEV_A_PAGE_POOL_NAPI_ID,
+	NETDEV_A_PAGE_POOL_INFLIGHT,
+	NETDEV_A_PAGE_POOL_INFLIGHT_MEM,
+	NETDEV_A_PAGE_POOL_DETACH_TIME,
+
+	__NETDEV_A_PAGE_POOL_MAX,
+	NETDEV_A_PAGE_POOL_MAX = (__NETDEV_A_PAGE_POOL_MAX - 1)
+};
+
+enum {
+	NETDEV_A_PAGE_POOL_STATS_INFO = 1,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_FAST = 8,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_SLOW_HIGH_ORDER,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_EMPTY,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_REFILL,
+	NETDEV_A_PAGE_POOL_STATS_ALLOC_WAIVE,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHED,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_CACHE_FULL,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RING_FULL,
+	NETDEV_A_PAGE_POOL_STATS_RECYCLE_RELEASED_REFCNT,
+
+	__NETDEV_A_PAGE_POOL_STATS_MAX,
+	NETDEV_A_PAGE_POOL_STATS_MAX = (__NETDEV_A_PAGE_POOL_STATS_MAX - 1)
+};
+
+enum {
+	NETDEV_A_NAPI_IFINDEX = 1,
+	NETDEV_A_NAPI_ID,
+	NETDEV_A_NAPI_IRQ,
+	NETDEV_A_NAPI_PID,
+
+	__NETDEV_A_NAPI_MAX,
+	NETDEV_A_NAPI_MAX = (__NETDEV_A_NAPI_MAX - 1)
+};
+
+enum {
+	NETDEV_A_QUEUE_ID = 1,
+	NETDEV_A_QUEUE_IFINDEX,
+	NETDEV_A_QUEUE_TYPE,
+	NETDEV_A_QUEUE_NAPI_ID,
+
+	__NETDEV_A_QUEUE_MAX,
+	NETDEV_A_QUEUE_MAX = (__NETDEV_A_QUEUE_MAX - 1)
+};
+
+enum {
 	NETDEV_CMD_DEV_GET = 1,
 	NETDEV_CMD_DEV_ADD_NTF,
 	NETDEV_CMD_DEV_DEL_NTF,
 	NETDEV_CMD_DEV_CHANGE_NTF,
+	NETDEV_CMD_PAGE_POOL_GET,
+	NETDEV_CMD_PAGE_POOL_ADD_NTF,
+	NETDEV_CMD_PAGE_POOL_DEL_NTF,
+	NETDEV_CMD_PAGE_POOL_CHANGE_NTF,
+	NETDEV_CMD_PAGE_POOL_STATS_GET,
+	NETDEV_CMD_QUEUE_GET,
+	NETDEV_CMD_NAPI_GET,
 
 	__NETDEV_CMD_MAX,
 	NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1)
 };
 
 #define NETDEV_MCGRP_MGMT	"mgmt"
+#define NETDEV_MCGRP_PAGE_POOL	"page-pool"
 
 #endif /* _UAPI_LINUX_NETDEV_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index dced2c49daec..1ccdcae24372 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -72,7 +72,7 @@
  * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
  * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
  *  - a setup station entry is added, not yet authorized, without any rate
- *    or capability information, this just exists to avoid race conditions
+ *    or capability information; this just exists to avoid race conditions
  *  - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
  *    to add rate and capability information to the station and at the same
  *    time mark it authorized.
@@ -87,7 +87,7 @@
  * DOC: Frame transmission/registration support
  *
  * Frame transmission and registration support exists to allow userspace
- * management entities such as wpa_supplicant react to management frames
+ * management entities such as wpa_supplicant to react to management frames
  * that are not being handled by the kernel. This includes, for example,
  * certain classes of action frames that cannot be handled in the kernel
  * for various reasons.
@@ -113,7 +113,7 @@
  *
  * Frame transmission allows userspace to send for example the required
  * responses to action frames. It is subject to some sanity checking,
- * but many frames can be transmitted. When a frame was transmitted, its
+ * but many frames can be transmitted. When a frame is transmitted, its
  * status is indicated to the sending socket.
  *
  * For more technical details, see the corresponding command descriptions
@@ -123,7 +123,7 @@
 /**
  * DOC: Virtual interface / concurrency capabilities
  *
- * Some devices are able to operate with virtual MACs, they can have
+ * Some devices are able to operate with virtual MACs; they can have
  * more than one virtual interface. The capability handling for this
  * is a bit complex though, as there may be a number of restrictions
  * on the types of concurrency that are supported.
@@ -135,7 +135,7 @@
  * Once concurrency is desired, more attributes must be observed:
  * To start with, since some interface types are purely managed in
  * software, like the AP-VLAN type in mac80211 for example, there's
- * an additional list of these, they can be added at any time and
+ * an additional list of these; they can be added at any time and
  * are only restricted by some semantic restrictions (e.g. AP-VLAN
  * cannot be added without a corresponding AP interface). This list
  * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute.
@@ -164,7 +164,7 @@
  * Packet coalesce feature helps to reduce number of received interrupts
  * to host by buffering these packets in firmware/hardware for some
  * predefined time. Received interrupt will be generated when one of the
- * following events occur.
+ * following events occurs.
  * a) Expiration of hardware timer whose expiration time is set to maximum
  * coalescing delay of matching coalesce rule.
  * b) Coalescing buffer in hardware reaches its limit.
@@ -174,7 +174,7 @@
  * rule.
  * a) Maximum coalescing delay
  * b) List of packet patterns which needs to be matched
- * c) Condition for coalescence. pattern 'match' or 'no match'
+ * c) Condition for coalescence: pattern 'match' or 'no match'
  * Multiple such rules can be created.
  */
 
@@ -213,7 +213,7 @@
 /**
  * DOC: FILS shared key authentication offload
  *
- * FILS shared key authentication offload can be advertized by drivers by
+ * FILS shared key authentication offload can be advertised by drivers by
  * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
  * FILS shared key authentication offload should be able to construct the
  * authentication and association frames for FILS shared key authentication and
@@ -239,7 +239,7 @@
  * The PMKSA can be maintained in userspace persistently so that it can be used
  * later after reboots or wifi turn off/on also.
  *
- * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
+ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertised by a FILS
  * capable AP supporting PMK caching. It specifies the scope within which the
  * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
  * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
@@ -290,12 +290,12 @@
  * If the configuration needs to be applied for specific peer then the MAC
  * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the
  * configuration will be applied for all the connected peers in the vif except
- * any peers that have peer specific configuration for the TID by default; if
- * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values
+ * any peers that have peer-specific configuration for the TID by default; if
+ * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer-specific values
  * will be overwritten.
  *
- * All this configuration is valid only for STA's current connection
- * i.e. the configuration will be reset to default when the STA connects back
+ * All this configuration is valid only for STA's current connection,
+ * i.e., the configuration will be reset to default when the STA connects back
  * after disconnection/roaming, and this configuration will be cleared when
  * the interface goes down.
  */
@@ -521,7 +521,7 @@
  *	%NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
  *	not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
  *	scheduled scan will run in an infinite loop with the specified interval.
- *	These attributes are mutually exculsive,
+ *	These attributes are mutually exclusive,
  *	i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
  *	NL80211_ATTR_SCHED_SCAN_PLANS is defined.
  *	If for some reason scheduled scan is aborted by the driver, all scan
@@ -552,7 +552,7 @@
  *	%NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface
  *	is brought down while a scheduled scan was running.
  *
- * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation
+ * @NL80211_CMD_GET_SURVEY: get survey results, e.g. channel occupation
  *      or noise level
  * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
  *	NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
@@ -563,12 +563,13 @@
  *	using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
  *	%NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
  *	authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
- *	advertized by a FILS capable AP identifying the scope of PMKSA in an
+ *	advertised by a FILS capable AP identifying the scope of PMKSA in an
  *	ESS.
  * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
  *	(for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
  *	%NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
- *	authentication.
+ *	authentication. Additionally in case of SAE offload and OWE offloads
+ *	PMKSA entry can be deleted using %NL80211_ATTR_SSID.
  * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
  *
  * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
@@ -607,7 +608,7 @@
  *	BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify
  *	the SSID (mainly for association, but is included in authentication
  *	request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ +
- *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the
+ *	%NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequency of the
  *	channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the
  *	authentication type. %NL80211_ATTR_IE is used to define IEs
  *	(VendorSpecificInfo, but also including RSN IE and FT IEs) to be added
@@ -816,7 +817,7 @@
  *	reached.
  * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ
  *	and the attributes determining channel width) the given interface
- *	(identifed by %NL80211_ATTR_IFINDEX) shall operate on.
+ *	(identified by %NL80211_ATTR_IFINDEX) shall operate on.
  *	In case multiple channels are supported by the device, the mechanism
  *	with which it switches channels is implementation-defined.
  *	When a monitor interface is given, it can only switch channel while
@@ -888,7 +889,7 @@
  *	inform userspace of the new replay counter.
  *
  * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
- *	of PMKSA caching dandidates.
+ *	of PMKSA caching candidates.
  *
  * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
  *	In addition, this can be used as an event to request userspace to take
@@ -924,7 +925,7 @@
  *
  * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface
  *	by sending a null data frame to it and reporting when the frame is
- *	acknowleged. This is used to allow timing out inactive clients. Uses
+ *	acknowledged. This is used to allow timing out inactive clients. Uses
  *	%NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a
  *	direct reply with an %NL80211_ATTR_COOKIE that is later used to match
  *	up the event with the request. The event includes the same data and
@@ -1135,11 +1136,15 @@
  * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
  *	configured PMK for the authenticator address identified by
  *	%NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
- *	completed successfully. Drivers that support 4 way handshake offload
- *	should send this event after indicating 802.1X FT assocation with
- *	%NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
- *	should be indicated instead.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates port is authorized and
+ *	open for regular data traffic. For STA/P2P-client, this event is sent
+ *	with AP MAC address and for AP/P2P-GO, the event carries the STA/P2P-
+ *	client MAC address.
+ *	Drivers that support 4 way handshake offload should send this event for
+ *	STA/P2P-client after successful 4-way HS or after 802.1X FT following
+ *	NL80211_CMD_CONNECT or NL80211_CMD_ROAM. Drivers using AP/P2P-GO 4-way
+ *	handshake offload should send this event on successful completion of
+ *	4-way handshake with the peer (STA/P2P-client).
  * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
  *	and RX notification.  This command is used both as a request to transmit
  *	a control port frame and as a notification that a control port frame
@@ -1323,6 +1328,11 @@
  *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
  *	information about the removed STA MLD setup links.
  *
+ * @NL80211_CMD_SET_TID_TO_LINK_MAPPING: Set the TID to Link Mapping for a
+ *      non-AP MLD station. The %NL80211_ATTR_MLO_TTLM_DLINK and
+ *      %NL80211_ATTR_MLO_TTLM_ULINK attributes are used to specify the
+ *      TID to Link mapping for downlink/uplink traffic.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1578,6 +1588,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_LINKS_REMOVED,
 
+	NL80211_CMD_SET_TID_TO_LINK_MAPPING,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1835,7 +1847,7 @@ enum nl80211_commands {
  *	using %CMD_CONTROL_PORT_FRAME.  If control port routing over NL80211 is
  *	to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER
  *	flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth
- *	frames are not forwared over the control port.
+ *	frames are not forwarded over the control port.
  *
  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
  *	We recommend using nested, driver-specific attributes within this.
@@ -1972,10 +1984,10 @@ enum nl80211_commands {
  *	bit. Depending on which antennas are selected in the bitmap, 802.11n
  *	drivers can derive which chainmasks to use (if all antennas belonging to
  *	a particular chain are disabled this chain should be disabled) and if
- *	a chain has diversity antennas wether diversity should be used or not.
+ *	a chain has diversity antennas whether diversity should be used or not.
  *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
  *	derived from the available chains after applying the antenna mask.
- *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Non-802.11n drivers can derive whether to use diversity or not.
  *	Drivers may reject configurations or RX/TX mask combinations they cannot
  *	support by returning -EINVAL.
  *
@@ -2545,7 +2557,7 @@ enum nl80211_commands {
  *	from successful FILS authentication and is used with
  *	%NL80211_CMD_CONNECT.
  *
- * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
+ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertised by a FILS AP
  *	identifying the scope of PMKSAs. This is used with
  *	@NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
  *
@@ -2826,6 +2838,19 @@ enum nl80211_commands {
  * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
  *	disabled.
  *
+ * @NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA: Include BSS usage data, i.e.
+ *	include BSSes that can only be used in restricted scenarios and/or
+ *	cannot be used at all.
+ *
+ * @NL80211_ATTR_MLO_TTLM_DLINK: Binary attribute specifying the downlink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ * @NL80211_ATTR_MLO_TTLM_ULINK: Binary attribute specifying the uplink TID to
+ *      link mapping. The length is 8 * sizeof(u16). For each TID the link
+ *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
+ *      in Draft P802.11be_D4.0.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3364,6 +3389,11 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_MLO_LINK_DISABLED,
 
+	NL80211_ATTR_BSS_DUMP_INCLUDE_USE_DATA,
+
+	NL80211_ATTR_MLO_TTLM_DLINK,
+	NL80211_ATTR_MLO_TTLM_ULINK,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -4170,7 +4200,7 @@ enum nl80211_wmm_rule {
  *	(100 * dBm).
  * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS
  *	(enum nl80211_dfs_state)
- * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long
+ * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in milliseconds for how long
  *	this channel is in this DFS state.
  * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this
  *	channel as the control channel
@@ -4226,6 +4256,14 @@ enum nl80211_wmm_rule {
  *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that
  *	is allowed on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_DFS_CONCURRENT: Operation on this channel is
+ *	allowed for peer-to-peer or adhoc communication under the control
+ *	of a DFS master which operates on the same channel (FCC-594280 D01
+ *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP
+ *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP
+ *	not allowed using this channel
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4265,6 +4303,9 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_320MHZ,
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
+	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4470,6 +4511,12 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  * @NL80211_RRF_NO_EHT: EHT operation not allowed
  * @NL80211_RRF_PSD: Ruleset has power spectral density value
+ * @NL80211_RRF_DFS_CONCURRENT: Operation on this channel is allowed for
+	peer-to-peer or adhoc communication under the control of a DFS master
+	which operates on the same channel (FCC-594280 D01 Section B.3).
+	Should be used together with %NL80211_RRF_DFS only.
+ * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4491,6 +4538,9 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_320MHZ		= 1<<18,
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
+	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
+	NL80211_RRF_NO_UHB_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_UHB_AFC_CLIENT	= 1<<23,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -5028,6 +5078,33 @@ enum nl80211_bss_scan_width {
 };
 
 /**
+ * enum nl80211_bss_use_for - bitmap indicating possible BSS use
+ * @NL80211_BSS_USE_FOR_NORMAL: Use this BSS for normal "connection",
+ *	including IBSS/MBSS depending on the type.
+ * @NL80211_BSS_USE_FOR_MLD_LINK: This BSS can be used as a link in an
+ *	MLO connection. Note that for an MLO connection, all links including
+ *	the assoc link must have this flag set, and the assoc link must
+ *	additionally have %NL80211_BSS_USE_FOR_NORMAL set.
+ */
+enum nl80211_bss_use_for {
+	NL80211_BSS_USE_FOR_NORMAL = 1 << 0,
+	NL80211_BSS_USE_FOR_MLD_LINK = 1 << 1,
+};
+
+/**
+ * enum nl80211_bss_cannot_use_reasons - reason(s) connection to a
+ *	BSS isn't possible
+ * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
+ *	supported by the device, and this BSS entry represents one.
+ * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting
+ *	the AP power type (SP, VLP, AP) that the AP uses.
+ */
+enum nl80211_bss_cannot_use_reasons {
+	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
+	NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH	= 1 << 1,
+};
+
+/**
  * enum nl80211_bss - netlink attributes for a BSS
  *
  * @__NL80211_BSS_INVALID: invalid
@@ -5079,6 +5156,14 @@ enum nl80211_bss_scan_width {
  * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz
  * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8).
  * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it.
+ * @NL80211_BSS_USE_FOR: u32 bitmap attribute indicating what the BSS can be
+ *	used for, see &enum nl80211_bss_use_for.
+ * @NL80211_BSS_CANNOT_USE_REASONS: Indicates the reason that this BSS cannot
+ *	be used for all or some of the possible uses by the device reporting it,
+ *	even though its presence was detected.
+ *	This is a u64 attribute containing a bitmap of values from
+ *	&enum nl80211_cannot_use_reasons, note that the attribute may be missing
+ *	if no reasons are specified.
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -5106,6 +5191,8 @@ enum nl80211_bss {
 	NL80211_BSS_FREQUENCY_OFFSET,
 	NL80211_BSS_MLO_LINK_ID,
 	NL80211_BSS_MLD_ADDR,
+	NL80211_BSS_USE_FOR,
+	NL80211_BSS_CANNOT_USE_REASONS,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
@@ -5454,7 +5541,7 @@ enum nl80211_tx_rate_setting {
  *	(%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE).
  * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but
  *	per peer instead.
- * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates
+ * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribute, if set indicates
  *	that the new configuration overrides all previous peer
  *	configurations, otherwise previous peer specific configurations
  *	should be left untouched.
@@ -5837,7 +5924,7 @@ enum nl80211_attr_coalesce_rule {
 
 /**
  * enum nl80211_coalesce_condition - coalesce rule conditions
- * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns
+ * @NL80211_COALESCE_CONDITION_MATCH: coalesce Rx packets when patterns
  *	in a rule are matched.
  * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns
  *	in a rule are not matched.
@@ -5936,7 +6023,7 @@ enum nl80211_if_combination_attrs {
  * enum nl80211_plink_state - state of a mesh peer link finite state machine
  *
  * @NL80211_PLINK_LISTEN: initial state, considered the implicit
- *	state of non existent mesh peer links
+ *	state of non-existent mesh peer links
  * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to
  *	this mesh peer
  * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received
@@ -6229,7 +6316,7 @@ enum nl80211_feature_flags {
  *	request to use RRM (see %NL80211_ATTR_USE_RRM) with
  *	%NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set
  *	the ASSOC_REQ_USE_RRM flag in the association request even if
- *	NL80211_FEATURE_QUIET is not advertized.
+ *	NL80211_FEATURE_QUIET is not advertised.
  * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air
  *	sniffer which means that it can be configured to hear packets from
  *	certain groups which can be configured by the
@@ -6241,13 +6328,15 @@ enum nl80211_feature_flags {
  *	the BSS that the interface that requested the scan is connected to
  *	(if available).
  * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the
- *	time the last beacon/probe was received. The time is the TSF of the
- *	BSS that the interface that requested the scan is connected to
- *	(if available).
+ *	time the last beacon/probe was received. For a non-MLO connection, the
+ *	time is the TSF of the BSS that the interface that requested the scan is
+ *	connected to (if available). For an MLO connection, the time is the TSF
+ *	of the BSS corresponding with link ID specified in the scan request (if
+ *	specified).
  * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of
  *	channel dwell time.
  * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate
- *	configuration (AP/mesh), supporting a legacy (non HT/VHT) rate.
+ *	configuration (AP/mesh), supporting a legacy (non-HT/VHT) rate.
  * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate
  *	configuration (AP/mesh) with HT rates.
  * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
@@ -6426,6 +6515,11 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE
  *	handling in AP mode.
  *
+ * @NL80211_EXT_FEATURE_DFS_CONCURRENT: The device supports peer-to-peer or
+ *	ad hoc operation on DFS channels under the control of a concurrent
+ *	DFS master on the same channel as described in FCC-594280 D01
+ *	(Section B.3). This, for example, allows P2P GO and P2P clients to
+ *	operate on DFS channels as long as there's a concurrent BSS connection.
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6499,6 +6593,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
+	NL80211_EXT_FEATURE_DFS_CONCURRENT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6583,7 +6678,7 @@ enum nl80211_timeout_reason {
  *	request parameters IE in the probe request
  * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
- *	rate of at least 5.5M. In case non OCE AP is discovered in the channel,
+ *	rate of at least 5.5M. In case non-OCE AP is discovered in the channel,
  *	only the first probe req in the channel will be sent in high rate.
  * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
  *	tx deferral (dot11FILSProbeDelay shall be set to 15ms)
@@ -6619,7 +6714,7 @@ enum nl80211_timeout_reason {
  *	received on the 2.4/5 GHz channels to actively scan only the 6GHz
  *	channels on which APs are expected to be found. Note that when not set,
  *	the scan logic would scan all 6GHz channels, but since transmission of
- *	probe requests on non PSC channels is limited, it is highly likely that
+ *	probe requests on non-PSC channels is limited, it is highly likely that
  *	these channels would passively be scanned. Also note that when the flag
  *	is set, in addition to the colocated APs, PSC channels would also be
  *	scanned if the user space has asked for it.
@@ -6951,7 +7046,7 @@ enum nl80211_nan_func_term_reason {
  *	The instance ID for the follow up Service Discovery Frame. This is u8.
  * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type
  *	is follow up. This is a u8.
- *	The requestor instance ID for the follow up Service Discovery Frame.
+ *	The requester instance ID for the follow up Service Discovery Frame.
  * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the
  *	follow up Service Discovery Frame. This is a binary attribute.
  * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a
@@ -7341,7 +7436,7 @@ enum nl80211_peer_measurement_attrs {
  * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if
  *	trigger based ranging measurement is supported
  * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating
- *	if non trigger based ranging measurement is supported
+ *	if non-trigger-based ranging measurement is supported
  *
  * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal
  * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number
@@ -7395,7 +7490,7 @@ enum nl80211_peer_measurement_ftm_capa {
  *      if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor
  *	%NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based
  *	ranging will be used.
- * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based
+ * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non-trigger-based
  *	ranging measurement (flag)
  *	This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are
  *	mutually exclusive.
@@ -7473,7 +7568,7 @@ enum nl80211_peer_measurement_ftm_failure_reasons {
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames
  *	transmitted (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames
- *	that were acknowleged (u32, optional)
+ *	that were acknowledged (u32, optional)
  * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the
  *	busy peer (u32, seconds)
  * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent
diff --git a/include/uapi/linux/pkt_cls.h b/include/uapi/linux/pkt_cls.h
index c7082cc60d21..ea277039f89d 100644
--- a/include/uapi/linux/pkt_cls.h
+++ b/include/uapi/linux/pkt_cls.h
@@ -99,7 +99,7 @@ enum {
  * versions.
  */
 #define TCA_ACT_GACT 5
-#define TCA_ACT_IPT 6
+#define TCA_ACT_IPT 6 /* obsoleted, can be reused */
 #define TCA_ACT_PEDIT 7
 #define TCA_ACT_MIRRED 8
 #define TCA_ACT_NAT 9
@@ -120,7 +120,7 @@ enum tca_id {
 	TCA_ID_UNSPEC = 0,
 	TCA_ID_POLICE = 1,
 	TCA_ID_GACT = TCA_ACT_GACT,
-	TCA_ID_IPT = TCA_ACT_IPT,
+	TCA_ID_IPT = TCA_ACT_IPT, /* Obsoleted, can be reused */
 	TCA_ID_PEDIT = TCA_ACT_PEDIT,
 	TCA_ID_MIRRED = TCA_ACT_MIRRED,
 	TCA_ID_NAT = TCA_ACT_NAT,
@@ -280,37 +280,6 @@ struct tc_u32_pcnt {
 
 #define TC_U32_MAXDEPTH 8
 
-
-/* RSVP filter */
-
-enum {
-	TCA_RSVP_UNSPEC,
-	TCA_RSVP_CLASSID,
-	TCA_RSVP_DST,
-	TCA_RSVP_SRC,
-	TCA_RSVP_PINFO,
-	TCA_RSVP_POLICE,
-	TCA_RSVP_ACT,
-	__TCA_RSVP_MAX
-};
-
-#define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
-
-struct tc_rsvp_gpi {
-	__u32	key;
-	__u32	mask;
-	int	offset;
-};
-
-struct tc_rsvp_pinfo {
-	struct tc_rsvp_gpi dpi;
-	struct tc_rsvp_gpi spi;
-	__u8	protocol;
-	__u8	tunnelid;
-	__u8	tunnelhdr;
-	__u8	pad;
-};
-
 /* ROUTE filter */
 
 enum {
@@ -341,22 +310,6 @@ enum {
 
 #define TCA_FW_MAX (__TCA_FW_MAX - 1)
 
-/* TC index filter */
-
-enum {
-	TCA_TCINDEX_UNSPEC,
-	TCA_TCINDEX_HASH,
-	TCA_TCINDEX_MASK,
-	TCA_TCINDEX_SHIFT,
-	TCA_TCINDEX_FALL_THROUGH,
-	TCA_TCINDEX_CLASSID,
-	TCA_TCINDEX_POLICE,
-	TCA_TCINDEX_ACT,
-	__TCA_TCINDEX_MAX
-};
-
-#define TCA_TCINDEX_MAX     (__TCA_TCINDEX_MAX - 1)
-
 /* Flow filter */
 
 enum {
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
index f762a10bfb78..a3cd0c2dc995 100644
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -477,115 +477,6 @@ enum {
 
 #define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1)
 
-
-/* CBQ section */
-
-#define TC_CBQ_MAXPRIO		8
-#define TC_CBQ_MAXLEVEL		8
-#define TC_CBQ_DEF_EWMA		5
-
-struct tc_cbq_lssopt {
-	unsigned char	change;
-	unsigned char	flags;
-#define TCF_CBQ_LSS_BOUNDED	1
-#define TCF_CBQ_LSS_ISOLATED	2
-	unsigned char  	ewma_log;
-	unsigned char  	level;
-#define TCF_CBQ_LSS_FLAGS	1
-#define TCF_CBQ_LSS_EWMA	2
-#define TCF_CBQ_LSS_MAXIDLE	4
-#define TCF_CBQ_LSS_MINIDLE	8
-#define TCF_CBQ_LSS_OFFTIME	0x10
-#define TCF_CBQ_LSS_AVPKT	0x20
-	__u32		maxidle;
-	__u32		minidle;
-	__u32		offtime;
-	__u32		avpkt;
-};
-
-struct tc_cbq_wrropt {
-	unsigned char	flags;
-	unsigned char	priority;
-	unsigned char	cpriority;
-	unsigned char	__reserved;
-	__u32		allot;
-	__u32		weight;
-};
-
-struct tc_cbq_ovl {
-	unsigned char	strategy;
-#define	TC_CBQ_OVL_CLASSIC	0
-#define	TC_CBQ_OVL_DELAY	1
-#define	TC_CBQ_OVL_LOWPRIO	2
-#define	TC_CBQ_OVL_DROP		3
-#define	TC_CBQ_OVL_RCLASSIC	4
-	unsigned char	priority2;
-	__u16		pad;
-	__u32		penalty;
-};
-
-struct tc_cbq_police {
-	unsigned char	police;
-	unsigned char	__res1;
-	unsigned short	__res2;
-};
-
-struct tc_cbq_fopt {
-	__u32		split;
-	__u32		defmap;
-	__u32		defchange;
-};
-
-struct tc_cbq_xstats {
-	__u32		borrows;
-	__u32		overactions;
-	__s32		avgidle;
-	__s32		undertime;
-};
-
-enum {
-	TCA_CBQ_UNSPEC,
-	TCA_CBQ_LSSOPT,
-	TCA_CBQ_WRROPT,
-	TCA_CBQ_FOPT,
-	TCA_CBQ_OVL_STRATEGY,
-	TCA_CBQ_RATE,
-	TCA_CBQ_RTAB,
-	TCA_CBQ_POLICE,
-	__TCA_CBQ_MAX,
-};
-
-#define TCA_CBQ_MAX	(__TCA_CBQ_MAX - 1)
-
-/* dsmark section */
-
-enum {
-	TCA_DSMARK_UNSPEC,
-	TCA_DSMARK_INDICES,
-	TCA_DSMARK_DEFAULT_INDEX,
-	TCA_DSMARK_SET_TC_INDEX,
-	TCA_DSMARK_MASK,
-	TCA_DSMARK_VALUE,
-	__TCA_DSMARK_MAX,
-};
-
-#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1)
-
-/* ATM  section */
-
-enum {
-	TCA_ATM_UNSPEC,
-	TCA_ATM_FD,		/* file/socket descriptor */
-	TCA_ATM_PTR,		/* pointer to descriptor - later */
-	TCA_ATM_HDR,		/* LL header */
-	TCA_ATM_EXCESS,		/* excess traffic class (0 for CLP)  */
-	TCA_ATM_ADDR,		/* PVC address (for output only) */
-	TCA_ATM_STATE,		/* VC state (ATM_VS_*; for output only) */
-	__TCA_ATM_MAX,
-};
-
-#define TCA_ATM_MAX	(__TCA_ATM_MAX - 1)
-
 /* Network emulator */
 
 enum {
diff --git a/include/uapi/linux/smc.h b/include/uapi/linux/smc.h
index 837fcd4b0abc..b531e3ef011a 100644
--- a/include/uapi/linux/smc.h
+++ b/include/uapi/linux/smc.h
@@ -160,6 +160,8 @@ enum {
 	SMC_NLA_LGR_D_CHID,		/* u16 */
 	SMC_NLA_LGR_D_PAD,		/* flag */
 	SMC_NLA_LGR_D_V2_COMMON,	/* nest */
+	SMC_NLA_LGR_D_EXT_GID,		/* u64 */
+	SMC_NLA_LGR_D_PEER_EXT_GID,	/* u64 */
 	__SMC_NLA_LGR_D_MAX,
 	SMC_NLA_LGR_D_MAX = __SMC_NLA_LGR_D_MAX - 1
 };
diff --git a/include/uapi/linux/smc_diag.h b/include/uapi/linux/smc_diag.h
index 8cb3a6fef553..58eceb7f5df2 100644
--- a/include/uapi/linux/smc_diag.h
+++ b/include/uapi/linux/smc_diag.h
@@ -107,6 +107,8 @@ struct smcd_diag_dmbinfo {		/* SMC-D Socket internals */
 	__aligned_u64	my_gid;		/* My GID */
 	__aligned_u64	token;		/* Token of DMB */
 	__aligned_u64	peer_token;	/* Token of remote DMBE */
+	__aligned_u64	peer_gid_ext;	/* Peer GID (extended part) */
+	__aligned_u64	my_gid_ext;	/* My GID (extended part) */
 };
 
 #endif /* _UAPI_SMC_DIAG_H_ */
diff --git a/include/uapi/linux/tc_act/tc_ipt.h b/include/uapi/linux/tc_act/tc_ipt.h
deleted file mode 100644
index c48d7da6750d..000000000000
--- a/include/uapi/linux/tc_act/tc_ipt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#ifndef __LINUX_TC_IPT_H
-#define __LINUX_TC_IPT_H
-
-#include <linux/pkt_cls.h>
-
-enum {
-	TCA_IPT_UNSPEC,
-	TCA_IPT_TABLE,
-	TCA_IPT_HOOK,
-	TCA_IPT_INDEX,
-	TCA_IPT_CNT,
-	TCA_IPT_TM,
-	TCA_IPT_TARG,
-	TCA_IPT_PAD,
-	__TCA_IPT_MAX
-};
-#define TCA_IPT_MAX (__TCA_IPT_MAX - 1)
-                                                                                
-#endif
diff --git a/include/uapi/linux/tc_act/tc_mirred.h b/include/uapi/linux/tc_act/tc_mirred.h
index 2500a0005d05..c61e76f3c23b 100644
--- a/include/uapi/linux/tc_act/tc_mirred.h
+++ b/include/uapi/linux/tc_act/tc_mirred.h
@@ -21,6 +21,7 @@ enum {
 	TCA_MIRRED_TM,
 	TCA_MIRRED_PARMS,
 	TCA_MIRRED_PAD,
+	TCA_MIRRED_BLOCKID,
 	__TCA_MIRRED_MAX
 };
 #define TCA_MIRRED_MAX (__TCA_MIRRED_MAX - 1)