Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     & unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 & WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...

18 files changed, 420 insertions, 38 deletions

diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 754e68ca8744..3c42b9f1bada 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -42,6 +42,7 @@
 #define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
 #define BPF_JSLT	0xc0	/* SLT is signed, '<' */
 #define BPF_JSLE	0xd0	/* SLE is signed, '<=' */
+#define BPF_JCOND	0xe0	/* conditional pseudo jumps: may_goto, goto_or_nop */
 #define BPF_CALL	0x80	/* function call */
 #define BPF_EXIT	0x90	/* function return */
 
@@ -50,6 +51,10 @@
 #define BPF_XCHG	(0xe0 | BPF_FETCH)	/* atomic exchange */
 #define BPF_CMPXCHG	(0xf0 | BPF_FETCH)	/* atomic compare-and-write */
 
+enum bpf_cond_pseudo_jmp {
+	BPF_MAY_GOTO = 0,
+};
+
 /* Register numbers */
 enum {
 	BPF_REG_0 = 0,
@@ -77,12 +82,29 @@ struct bpf_insn {
 	__s32	imm;		/* signed immediate constant */
 };
 
-/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */
+/* Deprecated: use struct bpf_lpm_trie_key_u8 (when the "data" member is needed for
+ * byte access) or struct bpf_lpm_trie_key_hdr (when using an alternative type for
+ * the trailing flexible array member) instead.
+ */
 struct bpf_lpm_trie_key {
 	__u32	prefixlen;	/* up to 32 for AF_INET, 128 for AF_INET6 */
 	__u8	data[0];	/* Arbitrary size */
 };
 
+/* Header for bpf_lpm_trie_key structs */
+struct bpf_lpm_trie_key_hdr {
+	__u32	prefixlen;
+};
+
+/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry, with trailing byte array. */
+struct bpf_lpm_trie_key_u8 {
+	union {
+		struct bpf_lpm_trie_key_hdr	hdr;
+		__u32				prefixlen;
+	};
+	__u8	data[];		/* Arbitrary size */
+};
+
 struct bpf_cgroup_storage_key {
 	__u64	cgroup_inode_id;	/* cgroup inode id */
 	__u32	attach_type;		/* program attach type (enum bpf_attach_type) */
@@ -617,7 +639,11 @@ union bpf_iter_link_info {
  *		to NULL to begin the batched operation. After each subsequent
  *		**BPF_MAP_LOOKUP_BATCH**, the caller should pass the resultant
  *		*out_batch* as the *in_batch* for the next operation to
- *		continue iteration from the current point.
+ *		continue iteration from the current point. Both *in_batch* and
+ *		*out_batch* must point to memory large enough to hold a key,
+ *		except for maps of type **BPF_MAP_TYPE_{HASH, PERCPU_HASH,
+ *		LRU_HASH, LRU_PERCPU_HASH}**, for which batch parameters
+ *		must be at least 4 bytes wide regardless of key size.
  *
  *		The *keys* and *values* are output parameters which must point
  *		to memory large enough to hold *count* items based on the key
@@ -847,6 +873,36 @@ union bpf_iter_link_info {
  *		Returns zero on success. On error, -1 is returned and *errno*
  *		is set appropriately.
  *
+ * BPF_TOKEN_CREATE
+ *	Description
+ *		Create BPF token with embedded information about what
+ *		BPF-related functionality it allows:
+ *		- a set of allowed bpf() syscall commands;
+ *		- a set of allowed BPF map types to be created with
+ *		BPF_MAP_CREATE command, if BPF_MAP_CREATE itself is allowed;
+ *		- a set of allowed BPF program types and BPF program attach
+ *		types to be loaded with BPF_PROG_LOAD command, if
+ *		BPF_PROG_LOAD itself is allowed.
+ *
+ *		BPF token is created (derived) from an instance of BPF FS,
+ *		assuming it has necessary delegation mount options specified.
+ *		This BPF token can be passed as an extra parameter to various
+ *		bpf() syscall commands to grant BPF subsystem functionality to
+ *		unprivileged processes.
+ *
+ *		When created, BPF token is "associated" with the owning
+ *		user namespace of BPF FS instance (super block) that it was
+ *		derived from, and subsequent BPF operations performed with
+ *		BPF token would be performing capabilities checks (i.e.,
+ *		CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN) within
+ *		that user namespace. Without BPF token, such capabilities
+ *		have to be granted in init user namespace, making bpf()
+ *		syscall incompatible with user namespace, for the most part.
+ *
+ *	Return
+ *		A new file descriptor (a nonnegative integer), or -1 if an
+ *		error occurred (in which case, *errno* is set appropriately).
+ *
  * NOTES
  *	eBPF objects (maps and programs) can be shared between processes.
  *
@@ -901,6 +957,8 @@ enum bpf_cmd {
 	BPF_ITER_CREATE,
 	BPF_LINK_DETACH,
 	BPF_PROG_BIND_MAP,
+	BPF_TOKEN_CREATE,
+	__MAX_BPF_CMD,
 };
 
 enum bpf_map_type {
@@ -951,6 +1009,8 @@ enum bpf_map_type {
 	BPF_MAP_TYPE_BLOOM_FILTER,
 	BPF_MAP_TYPE_USER_RINGBUF,
 	BPF_MAP_TYPE_CGRP_STORAGE,
+	BPF_MAP_TYPE_ARENA,
+	__MAX_BPF_MAP_TYPE
 };
 
 /* Note that tracing related programs such as
@@ -995,6 +1055,7 @@ enum bpf_prog_type {
 	BPF_PROG_TYPE_SK_LOOKUP,
 	BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */
 	BPF_PROG_TYPE_NETFILTER,
+	__MAX_BPF_PROG_TYPE
 };
 
 enum bpf_attach_type {
@@ -1278,6 +1339,10 @@ enum {
  */
 #define BPF_PSEUDO_KFUNC_CALL	2
 
+enum bpf_addr_space_cast {
+	BPF_ADDR_SPACE_CAST = 1,
+};
+
 /* flags for BPF_MAP_UPDATE_ELEM command */
 enum {
 	BPF_ANY		= 0, /* create new element or update existing */
@@ -1330,6 +1395,18 @@ enum {
 
 /* Get path from provided FD in BPF_OBJ_PIN/BPF_OBJ_GET commands */
 	BPF_F_PATH_FD		= (1U << 14),
+
+/* Flag for value_type_btf_obj_fd, the fd is available */
+	BPF_F_VTYPE_BTF_OBJ_FD	= (1U << 15),
+
+/* BPF token FD is passed in a corresponding command's token_fd field */
+	BPF_F_TOKEN_FD          = (1U << 16),
+
+/* When user space page faults in bpf_arena send SIGSEGV instead of inserting new page */
+	BPF_F_SEGV_ON_FAULT	= (1U << 17),
+
+/* Do not translate kernel bpf_arena pointers to user pointers */
+	BPF_F_NO_USER_CONV	= (1U << 18),
 };
 
 /* Flags for BPF_PROG_QUERY. */
@@ -1401,8 +1478,20 @@ union bpf_attr {
 		 * BPF_MAP_TYPE_BLOOM_FILTER - the lowest 4 bits indicate the
 		 * number of hash functions (if 0, the bloom filter will default
 		 * to using 5 hash functions).
+		 *
+		 * BPF_MAP_TYPE_ARENA - contains the address where user space
+		 * is going to mmap() the arena. It has to be page aligned.
 		 */
 		__u64	map_extra;
+
+		__s32   value_type_btf_obj_fd;	/* fd pointing to a BTF
+						 * type data for
+						 * btf_vmlinux_value_type_id.
+						 */
+		/* BPF token FD to use with BPF_MAP_CREATE operation.
+		 * If provided, map_flags should have BPF_F_TOKEN_FD flag set.
+		 */
+		__s32	map_token_fd;
 	};
 
 	struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */
@@ -1472,6 +1561,10 @@ union bpf_attr {
 		 * truncated), or smaller (if log buffer wasn't filled completely).
 		 */
 		__u32		log_true_size;
+		/* BPF token FD to use with BPF_PROG_LOAD operation.
+		 * If provided, prog_flags should have BPF_F_TOKEN_FD flag set.
+		 */
+		__s32		prog_token_fd;
 	};
 
 	struct { /* anonymous struct used by BPF_OBJ_* commands */
@@ -1584,6 +1677,11 @@ union bpf_attr {
 		 * truncated), or smaller (if log buffer wasn't filled completely).
 		 */
 		__u32		btf_log_true_size;
+		__u32		btf_flags;
+		/* BPF token FD to use with BPF_BTF_LOAD operation.
+		 * If provided, btf_flags should have BPF_F_TOKEN_FD flag set.
+		 */
+		__s32		btf_token_fd;
 	};
 
 	struct {
@@ -1714,6 +1812,11 @@ union bpf_attr {
 		__u32		flags;		/* extra flags */
 	} prog_bind_map;
 
+	struct { /* struct used by BPF_TOKEN_CREATE command */
+		__u32		flags;
+		__u32		bpffs_fd;
+	} token_create;
+
 } __attribute__((aligned(8)));
 
 /* The description below is an attempt at providing documentation to eBPF
@@ -4839,9 +4942,9 @@ union bpf_attr {
  * 		going through the CPU's backlog queue.
  *
  * 		The *flags* argument is reserved and must be 0. The helper is
- * 		currently only supported for tc BPF program types at the ingress
- * 		hook and for veth device types. The peer device must reside in a
- * 		different network namespace.
+ * 		currently only supported for tc BPF program types at the
+ * 		ingress hook and for veth and netkit target device types. The
+ * 		peer device must reside in a different network namespace.
  * 	Return
  * 		The helper returns **TC_ACT_REDIRECT** on success or
  * 		**TC_ACT_SHOT** on error.
@@ -6487,7 +6590,7 @@ struct bpf_map_info {
 	__u32 btf_id;
 	__u32 btf_key_type_id;
 	__u32 btf_value_type_id;
-	__u32 :32;	/* alignment pad */
+	__u32 btf_vmlinux_id;
 	__u64 map_extra;
 } __attribute__((aligned(8)));
 
@@ -6563,6 +6666,7 @@ struct bpf_link_info {
 			__u32 count; /* in/out: kprobe_multi function count */
 			__u32 flags;
 			__u64 missed;
+			__aligned_u64 cookies;
 		} kprobe_multi;
 		struct {
 			__aligned_u64 path;
@@ -6582,6 +6686,7 @@ struct bpf_link_info {
 					__aligned_u64 file_name; /* in/out */
 					__u32 name_len;
 					__u32 offset; /* offset from file_name */
+					__u64 cookie;
 				} uprobe; /* BPF_PERF_EVENT_UPROBE, BPF_PERF_EVENT_URETPROBE */
 				struct {
 					__aligned_u64 func_name; /* in/out */
@@ -6589,14 +6694,19 @@ struct bpf_link_info {
 					__u32 offset; /* offset from func_name */
 					__u64 addr;
 					__u64 missed;
+					__u64 cookie;
 				} kprobe; /* BPF_PERF_EVENT_KPROBE, BPF_PERF_EVENT_KRETPROBE */
 				struct {
 					__aligned_u64 tp_name;   /* in/out */
 					__u32 name_len;
+					__u32 :32;
+					__u64 cookie;
 				} tracepoint; /* BPF_PERF_EVENT_TRACEPOINT */
 				struct {
 					__u64 config;
 					__u32 type;
+					__u32 :32;
+					__u64 cookie;
 				} event; /* BPF_PERF_EVENT_EVENT */
 			};
 		} perf_event;
diff --git a/include/uapi/linux/can.h b/include/uapi/linux/can.h
index 939db2388208..e78cbd85ce7c 100644
--- a/include/uapi/linux/can.h
+++ b/include/uapi/linux/can.h
@@ -193,9 +193,14 @@ struct canfd_frame {
 #define CANXL_XLF 0x80 /* mandatory CAN XL frame flag (must always be set!) */
 #define CANXL_SEC 0x01 /* Simple Extended Content (security/segmentation) */
 
+/* the 8-bit VCID is optionally placed in the canxl_frame.prio element */
+#define CANXL_VCID_OFFSET 16 /* bit offset of VCID in prio element */
+#define CANXL_VCID_VAL_MASK 0xFFUL /* VCID is an 8-bit value */
+#define CANXL_VCID_MASK (CANXL_VCID_VAL_MASK << CANXL_VCID_OFFSET)
+
 /**
  * struct canxl_frame - CAN with e'X'tended frame 'L'ength frame structure
- * @prio:  11 bit arbitration priority with zero'ed CAN_*_FLAG flags
+ * @prio:  11 bit arbitration priority with zero'ed CAN_*_FLAG flags / VCID
  * @flags: additional flags for CAN XL
  * @sdt:   SDU (service data unit) type
  * @len:   frame payload length in byte (CANXL_MIN_DLEN .. CANXL_MAX_DLEN)
@@ -205,7 +210,7 @@ struct canfd_frame {
  * @prio shares the same position as @can_id from struct can[fd]_frame.
  */
 struct canxl_frame {
-	canid_t prio;  /* 11 bit priority for arbitration (canid_t) */
+	canid_t prio;  /* 11 bit priority for arbitration / 8 bit VCID */
 	__u8    flags; /* additional flags for CAN XL */
 	__u8    sdt;   /* SDU (service data unit) type */
 	__u16   len;   /* frame payload length in byte */
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
index 439c982f7e81..6cde62371b6f 100644
--- a/include/uapi/linux/can/isotp.h
+++ b/include/uapi/linux/can/isotp.h
@@ -137,6 +137,7 @@ struct can_isotp_ll_options {
 #define CAN_ISOTP_WAIT_TX_DONE	0x0400	/* wait for tx completion */
 #define CAN_ISOTP_SF_BROADCAST	0x0800	/* 1-to-N functional addressing */
 #define CAN_ISOTP_CF_BROADCAST	0x1000	/* 1-to-N transmission w/o FC */
+#define CAN_ISOTP_DYN_FC_PARMS	0x2000	/* dynamic FC parameters BS/STmin */
 
 /* protocol machine default values */
 
diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h
index 31622c9b7988..e024d896e278 100644
--- a/include/uapi/linux/can/raw.h
+++ b/include/uapi/linux/can/raw.h
@@ -65,6 +65,22 @@ enum {
 	CAN_RAW_FD_FRAMES,	/* allow CAN FD frames (default:off) */
 	CAN_RAW_JOIN_FILTERS,	/* all filters must match to trigger */
 	CAN_RAW_XL_FRAMES,	/* allow CAN XL frames (default:off) */
+	CAN_RAW_XL_VCID_OPTS,	/* CAN XL VCID configuration options */
 };
 
+/* configuration for CAN XL virtual CAN identifier (VCID) handling */
+struct can_raw_vcid_options {
+
+	__u8 flags;		/* flags for vcid (filter) behaviour */
+	__u8 tx_vcid;		/* VCID value set into canxl_frame.prio */
+	__u8 rx_vcid;		/* VCID value for VCID filter */
+	__u8 rx_vcid_mask;	/* VCID mask for VCID filter */
+
+};
+
+/* can_raw_vcid_options.flags for CAN XL virtual CAN identifier handling */
+#define CAN_RAW_XL_VCID_TX_SET		0x01
+#define CAN_RAW_XL_VCID_TX_PASS		0x02
+#define CAN_RAW_XL_VCID_RX_FILTER	0x04
+
 #endif /* !_UAPI_CAN_RAW_H */
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index 130cae0d3e20..2da0c7eb6710 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -614,7 +614,10 @@ enum devlink_attr {
 
 	DEVLINK_ATTR_REGION_DIRECT,		/* flag */
 
-	/* add new attributes above here, update the policy in devlink.c */
+	/* Add new attributes above here, update the spec in
+	 * Documentation/netlink/specs/devlink.yaml and re-generate
+	 * net/devlink/netlink_gen.c.
+	 */
 
 	__DEVLINK_ATTR_MAX,
 	DEVLINK_ATTR_MAX = __DEVLINK_ATTR_MAX - 1
diff --git a/include/uapi/linux/dpll.h b/include/uapi/linux/dpll.h
index b4e947f9bfbc..0c13d7f1a1bc 100644
--- a/include/uapi/linux/dpll.h
+++ b/include/uapi/linux/dpll.h
@@ -50,6 +50,35 @@ enum dpll_lock_status {
 	DPLL_LOCK_STATUS_MAX = (__DPLL_LOCK_STATUS_MAX - 1)
 };
 
+/**
+ * enum dpll_lock_status_error - if previous status change was done due to a
+ *   failure, this provides information of dpll device lock status error. Valid
+ *   values for DPLL_A_LOCK_STATUS_ERROR attribute
+ * @DPLL_LOCK_STATUS_ERROR_NONE: dpll device lock status was changed without
+ *   any error
+ * @DPLL_LOCK_STATUS_ERROR_UNDEFINED: dpll device lock status was changed due
+ *   to undefined error. Driver fills this value up in case it is not able to
+ *   obtain suitable exact error type.
+ * @DPLL_LOCK_STATUS_ERROR_MEDIA_DOWN: dpll device lock status was changed
+ *   because of associated media got down. This may happen for example if dpll
+ *   device was previously locked on an input pin of type
+ *   PIN_TYPE_SYNCE_ETH_PORT.
+ * @DPLL_LOCK_STATUS_ERROR_FRACTIONAL_FREQUENCY_OFFSET_TOO_HIGH: the FFO
+ *   (Fractional Frequency Offset) between the RX and TX symbol rate on the
+ *   media got too high. This may happen for example if dpll device was
+ *   previously locked on an input pin of type PIN_TYPE_SYNCE_ETH_PORT.
+ */
+enum dpll_lock_status_error {
+	DPLL_LOCK_STATUS_ERROR_NONE = 1,
+	DPLL_LOCK_STATUS_ERROR_UNDEFINED,
+	DPLL_LOCK_STATUS_ERROR_MEDIA_DOWN,
+	DPLL_LOCK_STATUS_ERROR_FRACTIONAL_FREQUENCY_OFFSET_TOO_HIGH,
+
+	/* private: */
+	__DPLL_LOCK_STATUS_ERROR_MAX,
+	DPLL_LOCK_STATUS_ERROR_MAX = (__DPLL_LOCK_STATUS_ERROR_MAX - 1)
+};
+
 #define DPLL_TEMP_DIVIDER	1000
 
 /**
@@ -150,6 +179,7 @@ enum dpll_a {
 	DPLL_A_LOCK_STATUS,
 	DPLL_A_TEMP,
 	DPLL_A_TYPE,
+	DPLL_A_LOCK_STATUS_ERROR,
 
 	__DPLL_A_MAX,
 	DPLL_A_MAX = (__DPLL_A_MAX - 1)
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 06ef6b78b7de..11fc18988bc2 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -2023,6 +2023,53 @@ static inline int ethtool_validate_duplex(__u8 duplex)
 #define	IPV4_FLOW	0x10	/* hash only */
 #define	IPV6_FLOW	0x11	/* hash only */
 #define	ETHER_FLOW	0x12	/* spec only (ether_spec) */
+
+/* Used for GTP-U IPv4 and IPv6.
+ * The format of GTP packets only includes
+ * elements such as TEID and GTP version.
+ * It is primarily intended for data communication of the UE.
+ */
+#define GTPU_V4_FLOW 0x13	/* hash only */
+#define GTPU_V6_FLOW 0x14	/* hash only */
+
+/* Use for GTP-C IPv4 and v6.
+ * The format of these GTP packets does not include TEID.
+ * Primarily expected to be used for communication
+ * to create sessions for UE data communication,
+ * commonly referred to as CSR (Create Session Request).
+ */
+#define GTPC_V4_FLOW 0x15	/* hash only */
+#define GTPC_V6_FLOW 0x16	/* hash only */
+
+/* Use for GTP-C IPv4 and v6.
+ * Unlike GTPC_V4_FLOW, the format of these GTP packets includes TEID.
+ * After session creation, it becomes this packet.
+ * This is mainly used for requests to realize UE handover.
+ */
+#define GTPC_TEID_V4_FLOW 0x17	/* hash only */
+#define GTPC_TEID_V6_FLOW 0x18	/* hash only */
+
+/* Use for GTP-U and extended headers for the PSC (PDU Session Container).
+ * The format of these GTP packets includes TEID and QFI.
+ * In 5G communication using UPF (User Plane Function),
+ * data communication with this extended header is performed.
+ */
+#define GTPU_EH_V4_FLOW 0x19	/* hash only */
+#define GTPU_EH_V6_FLOW 0x1a	/* hash only */
+
+/* Use for GTP-U IPv4 and v6 PSC (PDU Session Container) extended headers.
+ * This differs from GTPU_EH_V(4|6)_FLOW in that it is distinguished by
+ * UL/DL included in the PSC.
+ * There are differences in the data included based on Downlink/Uplink,
+ * and can be used to distinguish packets.
+ * The functions described so far are useful when you want to
+ * handle communication from the mobile network in UPF, PGW, etc.
+ */
+#define GTPU_UL_V4_FLOW 0x1b	/* hash only */
+#define GTPU_UL_V6_FLOW 0x1c	/* hash only */
+#define GTPU_DL_V4_FLOW 0x1d	/* hash only */
+#define GTPU_DL_V6_FLOW 0x1e	/* hash only */
+
 /* Flag to enable additional fields in struct ethtool_rx_flow_spec */
 #define	FLOW_EXT	0x80000000
 #define	FLOW_MAC_EXT	0x40000000
@@ -2037,6 +2084,7 @@ static inline int ethtool_validate_duplex(__u8 duplex)
 #define	RXH_IP_DST	(1 << 5)
 #define	RXH_L4_B_0_1	(1 << 6) /* src port in case of TCP/UDP/SCTP */
 #define	RXH_L4_B_2_3	(1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define	RXH_GTP_TEID	(1 << 8) /* teid in case of GTP */
 #define	RXH_DISCARD	(1 << 31)
 
 #define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
diff --git a/include/uapi/linux/eventpoll.h b/include/uapi/linux/eventpoll.h
index cfbcc4cc49ac..4f4b948ef381 100644
--- a/include/uapi/linux/eventpoll.h
+++ b/include/uapi/linux/eventpoll.h
@@ -85,4 +85,17 @@ struct epoll_event {
 	__u64 data;
 } EPOLL_PACKED;
 
+struct epoll_params {
+	__u32 busy_poll_usecs;
+	__u16 busy_poll_budget;
+	__u8 prefer_busy_poll;
+
+	/* pad the struct to a multiple of 64bits */
+	__u8 __pad;
+};
+
+#define EPOLL_IOC_TYPE 0x8A
+#define EPIOCSPARAMS _IOW(EPOLL_IOC_TYPE, 0x01, struct epoll_params)
+#define EPIOCGPARAMS _IOR(EPOLL_IOC_TYPE, 0x02, struct epoll_params)
+
 #endif /* _UAPI_LINUX_EVENTPOLL_H */
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index ab9bcff96e4d..ffa637b38c93 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -1505,6 +1505,7 @@ enum {
 	IFLA_BOND_AD_LACP_ACTIVE,
 	IFLA_BOND_MISSED_MAX,
 	IFLA_BOND_NS_IP6_TARGET,
+	IFLA_BOND_COUPLED_CONTROL,
 	__IFLA_BOND_MAX,
 };
 
diff --git a/include/uapi/linux/ioam6_genl.h b/include/uapi/linux/ioam6_genl.h
index ca4b22833754..1733fbc51fb5 100644
--- a/include/uapi/linux/ioam6_genl.h
+++ b/include/uapi/linux/ioam6_genl.h
@@ -49,4 +49,24 @@ enum {
 
 #define IOAM6_CMD_MAX (__IOAM6_CMD_MAX - 1)
 
+#define IOAM6_GENL_EV_GRP_NAME "ioam6_events"
+
+enum ioam6_event_type {
+	IOAM6_EVENT_UNSPEC,
+	IOAM6_EVENT_TRACE,
+};
+
+enum ioam6_event_attr {
+	IOAM6_EVENT_ATTR_UNSPEC,
+
+	IOAM6_EVENT_ATTR_TRACE_NAMESPACE,	/* u16 */
+	IOAM6_EVENT_ATTR_TRACE_NODELEN,		/* u8 */
+	IOAM6_EVENT_ATTR_TRACE_TYPE,		/* u32 */
+	IOAM6_EVENT_ATTR_TRACE_DATA,		/* Binary */
+
+	__IOAM6_EVENT_ATTR_MAX
+};
+
+#define IOAM6_EVENT_ATTR_MAX (__IOAM6_EVENT_ATTR_MAX - 1)
+
 #endif /* _UAPI_LINUX_IOAM6_GENL_H */
diff --git a/include/uapi/linux/mctp.h b/include/uapi/linux/mctp.h
index 154ab56651f1..e1db65df9359 100644
--- a/include/uapi/linux/mctp.h
+++ b/include/uapi/linux/mctp.h
@@ -50,7 +50,14 @@ struct sockaddr_mctp_ext {
 
 #define SIOCMCTPALLOCTAG	(SIOCPROTOPRIVATE + 0)
 #define SIOCMCTPDROPTAG		(SIOCPROTOPRIVATE + 1)
+#define SIOCMCTPALLOCTAG2	(SIOCPROTOPRIVATE + 2)
+#define SIOCMCTPDROPTAG2	(SIOCPROTOPRIVATE + 3)
 
+/* Deprecated: use mctp_ioc_tag_ctl2 / TAG2 ioctls instead, which defines the
+ * MCTP network ID as part of the allocated tag. Using this assumes the default
+ * net ID for allocated tags, which may not give correct behaviour on system
+ * with multiple networks configured.
+ */
 struct mctp_ioc_tag_ctl {
 	mctp_eid_t	peer_addr;
 
@@ -65,4 +72,29 @@ struct mctp_ioc_tag_ctl {
 	__u16		flags;
 };
 
+struct mctp_ioc_tag_ctl2 {
+	/* Peer details: network ID, peer EID, local EID. All set by the
+	 * caller.
+	 *
+	 * Local EID must be MCTP_ADDR_NULL or MCTP_ADDR_ANY in current
+	 * kernels.
+	 */
+	unsigned int	net;
+	mctp_eid_t	peer_addr;
+	mctp_eid_t	local_addr;
+
+	/* Set by caller, but no flags defined currently. Must be 0 */
+	__u16		flags;
+
+	/* For SIOCMCTPALLOCTAG2: must be passed as zero, kernel will
+	 * populate with the allocated tag value. Returned tag value will
+	 * always have TO and PREALLOC set.
+	 *
+	 * For SIOCMCTPDROPTAG2: userspace provides tag value to drop, from
+	 * a prior SIOCMCTPALLOCTAG2 call (and so must have TO and PREALLOC set).
+	 */
+	__u8		tag;
+
+};
+
 #endif /* __UAPI_MCTP_H */
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index d03863da180e..c0c8ec995b06 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -138,6 +138,8 @@
 #define MDIO_PMA_SPEED_1000		0x0010	/* 1000M capable */
 #define MDIO_PMA_SPEED_100		0x0020	/* 100M capable */
 #define MDIO_PMA_SPEED_10		0x0040	/* 10M capable */
+#define MDIO_PMA_SPEED_2_5G		0x2000	/* 2.5G capable */
+#define MDIO_PMA_SPEED_5G		0x4000	/* 5G capable */
 #define MDIO_PCS_SPEED_10P2B		0x0002	/* 10PASS-TS/2BASE-TL capable */
 #define MDIO_PCS_SPEED_2_5G		0x0040	/* 2.5G capable */
 #define MDIO_PCS_SPEED_5G		0x0080	/* 5G capable */
@@ -348,6 +350,8 @@
 
 /* BASE-T1 auto-negotiation advertisement register [31:16] */
 #define MDIO_AN_T1_ADV_M_B10L		0x4000	/* device is compatible with 10BASE-T1L */
+#define MDIO_AN_T1_ADV_M_1000BT1	0x0080	/* advertise 1000BASE-T1 */
+#define MDIO_AN_T1_ADV_M_100BT1		0x0020	/* advertise 100BASE-T1 */
 #define MDIO_AN_T1_ADV_M_MST		0x0010	/* advertise master preference */
 
 /* BASE-T1 auto-negotiation advertisement register [47:32] */
diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h
index 93cb411adf72..bb65ee840cda 100644
--- a/include/uapi/linux/netdev.h
+++ b/include/uapi/linux/netdev.h
@@ -70,6 +70,10 @@ enum netdev_queue_type {
 	NETDEV_QUEUE_TYPE_TX,
 };
 
+enum netdev_qstats_scope {
+	NETDEV_QSTATS_SCOPE_QUEUE = 1,
+};
+
 enum {
 	NETDEV_A_DEV_IFINDEX = 1,
 	NETDEV_A_DEV_PAD,
@@ -133,6 +137,21 @@ enum {
 };
 
 enum {
+	NETDEV_A_QSTATS_IFINDEX = 1,
+	NETDEV_A_QSTATS_QUEUE_TYPE,
+	NETDEV_A_QSTATS_QUEUE_ID,
+	NETDEV_A_QSTATS_SCOPE,
+	NETDEV_A_QSTATS_RX_PACKETS = 8,
+	NETDEV_A_QSTATS_RX_BYTES,
+	NETDEV_A_QSTATS_TX_PACKETS,
+	NETDEV_A_QSTATS_TX_BYTES,
+	NETDEV_A_QSTATS_RX_ALLOC_FAIL,
+
+	__NETDEV_A_QSTATS_MAX,
+	NETDEV_A_QSTATS_MAX = (__NETDEV_A_QSTATS_MAX - 1)
+};
+
+enum {
 	NETDEV_CMD_DEV_GET = 1,
 	NETDEV_CMD_DEV_ADD_NTF,
 	NETDEV_CMD_DEV_DEL_NTF,
@@ -144,6 +163,7 @@ enum {
 	NETDEV_CMD_PAGE_POOL_STATS_GET,
 	NETDEV_CMD_QUEUE_GET,
 	NETDEV_CMD_NAPI_GET,
+	NETDEV_CMD_QSTATS_GET,
 
 	__NETDEV_CMD_MAX,
 	NETDEV_CMD_MAX = (__NETDEV_CMD_MAX - 1)
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 117c6a9b845b..aa4094ca2444 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -179,13 +179,17 @@ enum nft_hook_attributes {
  * enum nft_table_flags - nf_tables table flags
  *
  * @NFT_TABLE_F_DORMANT: this table is not active
+ * @NFT_TABLE_F_OWNER:   this table is owned by a process
+ * @NFT_TABLE_F_PERSIST: this table shall outlive its owner
  */
 enum nft_table_flags {
 	NFT_TABLE_F_DORMANT	= 0x1,
 	NFT_TABLE_F_OWNER	= 0x2,
+	NFT_TABLE_F_PERSIST	= 0x4,
 };
 #define NFT_TABLE_F_MASK	(NFT_TABLE_F_DORMANT | \
-				 NFT_TABLE_F_OWNER)
+				 NFT_TABLE_F_OWNER | \
+				 NFT_TABLE_F_PERSIST)
 
 /**
  * enum nft_table_attributes - nf_tables table netlink attributes
diff --git a/include/uapi/linux/nexthop.h b/include/uapi/linux/nexthop.h
index d8ffa8c9ca78..dd8787f9cf39 100644
--- a/include/uapi/linux/nexthop.h
+++ b/include/uapi/linux/nexthop.h
@@ -30,6 +30,9 @@ enum {
 
 #define NEXTHOP_GRP_TYPE_MAX (__NEXTHOP_GRP_TYPE_MAX - 1)
 
+#define NHA_OP_FLAG_DUMP_STATS		BIT(0)
+#define NHA_OP_FLAG_DUMP_HW_STATS	BIT(1)
+
 enum {
 	NHA_UNSPEC,
 	NHA_ID,		/* u32; id for nexthop. id == 0 means auto-assign */
@@ -60,6 +63,18 @@ enum {
 	/* nested; nexthop bucket attributes */
 	NHA_RES_BUCKET,
 
+	/* u32; operation-specific flags */
+	NHA_OP_FLAGS,
+
+	/* nested; nexthop group stats */
+	NHA_GROUP_STATS,
+
+	/* u32; nexthop hardware stats enable */
+	NHA_HW_STATS_ENABLE,
+
+	/* u32; read-only; whether any driver collects HW stats */
+	NHA_HW_STATS_USED,
+
 	__NHA_MAX,
 };
 
@@ -101,4 +116,34 @@ enum {
 
 #define NHA_RES_BUCKET_MAX	(__NHA_RES_BUCKET_MAX - 1)
 
+enum {
+	NHA_GROUP_STATS_UNSPEC,
+
+	/* nested; nexthop group entry stats */
+	NHA_GROUP_STATS_ENTRY,
+
+	__NHA_GROUP_STATS_MAX,
+};
+
+#define NHA_GROUP_STATS_MAX	(__NHA_GROUP_STATS_MAX - 1)
+
+enum {
+	NHA_GROUP_STATS_ENTRY_UNSPEC,
+
+	/* u32; nexthop id of the nexthop group entry */
+	NHA_GROUP_STATS_ENTRY_ID,
+
+	/* uint; number of packets forwarded via the nexthop group entry */
+	NHA_GROUP_STATS_ENTRY_PACKETS,
+
+	/* uint; number of packets forwarded via the nexthop group entry in
+	 * hardware
+	 */
+	NHA_GROUP_STATS_ENTRY_PACKETS_HW,
+
+	__NHA_GROUP_STATS_ENTRY_MAX,
+};
+
+#define NHA_GROUP_STATS_ENTRY_MAX	(__NHA_GROUP_STATS_ENTRY_MAX - 1)
+
 #endif
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 1ccdcae24372..f23ecbdd84a2 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2023 Intel Corporation
+ * Copyright (C) 2018-2024 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -438,7 +438,8 @@
  *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
  *	of disconnection indication should be sent to the station
  *	(Deauthentication or Disassociation frame and reason code for that
- *	frame).
+ *	frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
+ *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
@@ -2851,6 +2852,10 @@ enum nl80211_commands {
  *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
  *      in Draft P802.11be_D4.0.
  *
+ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
+ *	%NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
+ *	are used on this connection
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3394,6 +3399,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_MLO_TTLM_DLINK,
 	NL80211_ATTR_MLO_TTLM_ULINK,
 
+	NL80211_ATTR_ASSOC_SPP_AMSDU,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3534,6 +3541,7 @@ enum nl80211_iftype {
  * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
  *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
  *	previously added station into associated state
+ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -3546,6 +3554,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_AUTHENTICATED,
 	NL80211_STA_FLAG_TDLS_PEER,
 	NL80211_STA_FLAG_ASSOCIATED,
+	NL80211_STA_FLAG_SPP_AMSDU,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -4260,10 +4269,13 @@ enum nl80211_wmm_rule {
  *	allowed for peer-to-peer or adhoc communication under the control
  *	of a DFS master which operates on the same channel (FCC-594280 D01
  *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
- * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
  *	not allowed using this channel
- * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
  *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
+ *	mode despite other (regulatory) restrictions, even if the channel is
+ *	otherwise completely disabled.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4304,8 +4316,9 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
 	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
-	NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT,
-	NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
+	NL80211_FREQUENCY_ATTR_CAN_MONITOR,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4318,6 +4331,10 @@ enum nl80211_frequency_attr {
 #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
 					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
@@ -4455,14 +4472,7 @@ enum nl80211_reg_rule_attr {
  *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
  *	(this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- *	band specific minimum rssi thresholds for the bands defined in
- *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- *	band shall be encapsulated in attribute with type value equals to one
- *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- *	attributes will be nested within this attribute.
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -4475,7 +4485,7 @@ enum nl80211_sched_scan_match_attr {
 	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
-	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
+	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4515,8 +4525,8 @@ enum nl80211_sched_scan_match_attr {
 	peer-to-peer or adhoc communication under the control of a DFS master
 	which operates on the same channel (FCC-594280 D01 Section B.3).
 	Should be used together with %NL80211_RRF_DFS only.
- * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed
- * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed
+ * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4539,8 +4549,8 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
 	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
-	NL80211_RRF_NO_UHB_VLP_CLIENT	= 1<<22,
-	NL80211_RRF_NO_UHB_AFC_CLIENT	= 1<<23,
+	NL80211_RRF_NO_6GHZ_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_6GHZ_AFC_CLIENT	= 1<<23,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4549,6 +4559,8 @@ enum nl80211_reg_rule_flags {
 #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
 					 NL80211_RRF_NO_HT40PLUS)
 #define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
+#define NL80211_RRF_NO_UHB_VLP_CLIENT	NL80211_RRF_NO_6GHZ_VLP_CLIENT
+#define NL80211_RRF_NO_UHB_AFC_CLIENT	NL80211_RRF_NO_6GHZ_AFC_CLIENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -5096,14 +5108,17 @@ enum nl80211_bss_use_for {
  *	BSS isn't possible
  * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
  *	supported by the device, and this BSS entry represents one.
- * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting
+ * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
  *	the AP power type (SP, VLP, AP) that the AP uses.
  */
 enum nl80211_bss_cannot_use_reasons {
 	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
-	NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH	= 1 << 1,
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH	= 1 << 1,
 };
 
+#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
+
 /**
  * enum nl80211_bss - netlink attributes for a BSS
  *
@@ -5742,6 +5757,8 @@ struct nl80211_pattern_support {
  *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
  *	frequency, it means that the match occurred in more than one
  *	channel.
+ * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
+ *	Wake up happened due to unprotected deauth or disassoc frame in MFP.
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  *
@@ -5769,6 +5786,7 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 	NL80211_WOWLAN_TRIG_NET_DETECT,
 	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
+	NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -6410,8 +6428,7 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
  *	(set/del PMKSA operations) in AP mode.
  *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- *	filtering of sched scan results using band specific RSSI thresholds.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
  *
  * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
  *	to a station.
@@ -6520,6 +6537,11 @@ enum nl80211_feature_flags {
  *	DFS master on the same channel as described in FCC-594280 D01
  *	(Section B.3). This, for example, allows P2P GO and P2P clients to
  *	operate on DFS channels as long as there's a concurrent BSS connection.
+ *
+ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
+ *	(signaling and payload protected) A-MSDUs and this shall be advertised
+ *	in the RSNXE.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6561,7 +6583,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
 	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
 	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
-	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
 	NL80211_EXT_FEATURE_EXT_KEY_ID,
 	NL80211_EXT_FEATURE_STA_TX_PWR,
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
@@ -6594,6 +6616,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
 	NL80211_EXT_FEATURE_DFS_CONCURRENT,
+	NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h
index da700999cad4..053b40d642de 100644
--- a/include/uapi/linux/ptp_clock.h
+++ b/include/uapi/linux/ptp_clock.h
@@ -32,6 +32,7 @@
 #define PTP_RISING_EDGE    (1<<1)
 #define PTP_FALLING_EDGE   (1<<2)
 #define PTP_STRICT_FLAGS   (1<<3)
+#define PTP_EXT_OFFSET     (1<<4)
 #define PTP_EXTTS_EDGES    (PTP_RISING_EDGE | PTP_FALLING_EDGE)
 
 /*
@@ -40,7 +41,8 @@
 #define PTP_EXTTS_VALID_FLAGS	(PTP_ENABLE_FEATURE |	\
 				 PTP_RISING_EDGE |	\
 				 PTP_FALLING_EDGE |	\
-				 PTP_STRICT_FLAGS)
+				 PTP_STRICT_FLAGS |	\
+				 PTP_EXT_OFFSET)
 
 /*
  * flag fields valid for the original PTP_EXTTS_REQUEST ioctl.
@@ -51,6 +53,11 @@
 					 PTP_FALLING_EDGE)
 
 /*
+ * flag fields valid for the ptp_extts_event report.
+ */
+#define PTP_EXTTS_EVENT_VALID	(PTP_ENABLE_FEATURE)
+
+/*
  * Bits of the ptp_perout_request.flags field:
  */
 #define PTP_PEROUT_ONE_SHOT		(1<<0)
@@ -228,9 +235,9 @@ struct ptp_pin_desc {
 #define PTP_MASK_EN_SINGLE  _IOW(PTP_CLK_MAGIC, 20, unsigned int)
 
 struct ptp_extts_event {
-	struct ptp_clock_time t; /* Time event occured. */
+	struct ptp_clock_time t; /* Time event occurred. */
 	unsigned int index;      /* Which channel produced the event. */
-	unsigned int flags;      /* Reserved for future use. */
+	unsigned int flags;      /* Event type. */
 	unsigned int rsv[2];     /* Reserved for future use. */
 };
 
diff --git a/include/uapi/linux/tc_act/tc_pedit.h b/include/uapi/linux/tc_act/tc_pedit.h
index f3e61b04fa01..f5cab7fc96ab 100644
--- a/include/uapi/linux/tc_act/tc_pedit.h
+++ b/include/uapi/linux/tc_act/tc_pedit.h
@@ -62,7 +62,7 @@ struct tc_pedit_sel {
 	tc_gen;
 	unsigned char           nkeys;
 	unsigned char           flags;
-	struct tc_pedit_key     keys[0];
+	struct tc_pedit_key     keys[] __counted_by(nkeys);
 };
 
 #define tc_pedit tc_pedit_sel