Merge tag 'wireless-next-2024-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Kalle Valo says:

====================
wireless-next patches for v6.9

The second "new features" pull request for v6.9.  Lots of iwlwifi and
stack changes this time. And naturally smaller changes to other drivers.

We also twice merged wireless into wireless-next to avoid conflicts
between the trees.

Major changes:

stack

* mac80211: negotiated TTLM request support

* SPP A-MSDU support

* mac80211: wider bandwidth OFDMA config support

iwlwifi

* kunit tests

* bump FW API to 89 for AX/BZ/SC devices

* enable SPP A-MSDUs

* support for new devices

ath12k

* refactoring in preparation for Multi-Link Operation (MLO) support

* 1024 Block Ack window size support

* provide firmware wmi logs via a trace event

ath11k

* 36 bit DMA mask support

* support 6 GHz station power modes: Low Power Indoor (LPI), Standard
  Power) SP and Very Low Power (VLP)

rtl8xxxu

* TP-Link TL-WN823N V2 support
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 47 insertions, 24 deletions

diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 1ccdcae24372..f23ecbdd84a2 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2023 Intel Corporation
+ * Copyright (C) 2018-2024 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -438,7 +438,8 @@
  *	%NL80211_ATTR_REASON_CODE can optionally be used to specify which type
  *	of disconnection indication should be sent to the station
  *	(Deauthentication or Disassociation frame and reason code for that
- *	frame).
+ *	frame). %NL80211_ATTR_MLO_LINK_ID can be used optionally to remove
+ *	stations connected and using at least that link as one of its links.
  *
  * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
  * 	destination %NL80211_ATTR_MAC on the interface identified by
@@ -2851,6 +2852,10 @@ enum nl80211_commands {
  *      mapping is as defined in section 9.4.2.314 (TID-To-Link Mapping element)
  *      in Draft P802.11be_D4.0.
  *
+ * @NL80211_ATTR_ASSOC_SPP_AMSDU: flag attribute used with
+ *	%NL80211_CMD_ASSOCIATE indicating the SPP A-MSDUs
+ *	are used on this connection
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -3394,6 +3399,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_MLO_TTLM_DLINK,
 	NL80211_ATTR_MLO_TTLM_ULINK,
 
+	NL80211_ATTR_ASSOC_SPP_AMSDU,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3534,6 +3541,7 @@ enum nl80211_iftype {
  * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers
  *	that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a
  *	previously added station into associated state
+ * @NL80211_STA_FLAG_SPP_AMSDU: station supports SPP A-MSDUs
  * @NL80211_STA_FLAG_MAX: highest station flag number currently defined
  * @__NL80211_STA_FLAG_AFTER_LAST: internal use
  */
@@ -3546,6 +3554,7 @@ enum nl80211_sta_flags {
 	NL80211_STA_FLAG_AUTHENTICATED,
 	NL80211_STA_FLAG_TDLS_PEER,
 	NL80211_STA_FLAG_ASSOCIATED,
+	NL80211_STA_FLAG_SPP_AMSDU,
 
 	/* keep last */
 	__NL80211_STA_FLAG_AFTER_LAST,
@@ -4260,10 +4269,13 @@ enum nl80211_wmm_rule {
  *	allowed for peer-to-peer or adhoc communication under the control
  *	of a DFS master which operates on the same channel (FCC-594280 D01
  *	Section B.3). Should be used together with %NL80211_RRF_DFS only.
- * @NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT: Client connection to VLP AP
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP
  *	not allowed using this channel
- * @NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT: Client connection to AFC AP
+ * @NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP
  *	not allowed using this channel
+ * @NL80211_FREQUENCY_ATTR_CAN_MONITOR: This channel can be used in monitor
+ *	mode despite other (regulatory) restrictions, even if the channel is
+ *	otherwise completely disabled.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4304,8 +4316,9 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_EHT,
 	NL80211_FREQUENCY_ATTR_PSD,
 	NL80211_FREQUENCY_ATTR_DFS_CONCURRENT,
-	NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT,
-	NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT,
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT,
+	NL80211_FREQUENCY_ATTR_CAN_MONITOR,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4318,6 +4331,10 @@ enum nl80211_frequency_attr {
 #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
 					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_VLP_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_VLP_CLIENT
+#define NL80211_FREQUENCY_ATTR_NO_UHB_AFC_CLIENT \
+	NL80211_FREQUENCY_ATTR_NO_6GHZ_AFC_CLIENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
@@ -4455,14 +4472,7 @@ enum nl80211_reg_rule_attr {
  *	value as specified by &struct nl80211_bss_select_rssi_adjust.
  * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
  *	(this cannot be used together with SSID).
- * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the
- *	band specific minimum rssi thresholds for the bands defined in
- *	enum nl80211_band. The minimum rssi threshold value(s32) specific to a
- *	band shall be encapsulated in attribute with type value equals to one
- *	of the NL80211_BAND_* defined in enum nl80211_band. For example, the
- *	minimum rssi threshold value for 2.4GHZ band shall be encapsulated
- *	within an attribute of type NL80211_BAND_2GHZ. And one or more of such
- *	attributes will be nested within this attribute.
+ * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Obsolete
  * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
  *	attribute number currently defined
  * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
@@ -4475,7 +4485,7 @@ enum nl80211_sched_scan_match_attr {
 	NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
 	NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
 	NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
-	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI,
+	NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, /* obsolete */
 
 	/* keep last */
 	__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
@@ -4515,8 +4525,8 @@ enum nl80211_sched_scan_match_attr {
 	peer-to-peer or adhoc communication under the control of a DFS master
 	which operates on the same channel (FCC-594280 D01 Section B.3).
 	Should be used together with %NL80211_RRF_DFS only.
- * @NL80211_RRF_NO_UHB_VLP_CLIENT: Client connection to VLP AP not allowed
- * @NL80211_RRF_NO_UHB_AFC_CLIENT: Client connection to AFC AP not allowed
+ * @NL80211_RRF_NO_6GHZ_VLP_CLIENT: Client connection to VLP AP not allowed
+ * @NL80211_RRF_NO_6GHZ_AFC_CLIENT: Client connection to AFC AP not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4539,8 +4549,8 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_EHT		= 1<<19,
 	NL80211_RRF_PSD			= 1<<20,
 	NL80211_RRF_DFS_CONCURRENT	= 1<<21,
-	NL80211_RRF_NO_UHB_VLP_CLIENT	= 1<<22,
-	NL80211_RRF_NO_UHB_AFC_CLIENT	= 1<<23,
+	NL80211_RRF_NO_6GHZ_VLP_CLIENT	= 1<<22,
+	NL80211_RRF_NO_6GHZ_AFC_CLIENT	= 1<<23,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4549,6 +4559,8 @@ enum nl80211_reg_rule_flags {
 #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
 					 NL80211_RRF_NO_HT40PLUS)
 #define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
+#define NL80211_RRF_NO_UHB_VLP_CLIENT	NL80211_RRF_NO_6GHZ_VLP_CLIENT
+#define NL80211_RRF_NO_UHB_AFC_CLIENT	NL80211_RRF_NO_6GHZ_AFC_CLIENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
@@ -5096,14 +5108,17 @@ enum nl80211_bss_use_for {
  *	BSS isn't possible
  * @NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY: NSTR nonprimary links aren't
  *	supported by the device, and this BSS entry represents one.
- * @NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH: STA is not supporting
+ * @NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH: STA is not supporting
  *	the AP power type (SP, VLP, AP) that the AP uses.
  */
 enum nl80211_bss_cannot_use_reasons {
 	NL80211_BSS_CANNOT_USE_NSTR_NONPRIMARY	= 1 << 0,
-	NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH	= 1 << 1,
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH	= 1 << 1,
 };
 
+#define NL80211_BSS_CANNOT_USE_UHB_PWR_MISMATCH \
+	NL80211_BSS_CANNOT_USE_6GHZ_PWR_MISMATCH
+
 /**
  * enum nl80211_bss - netlink attributes for a BSS
  *
@@ -5742,6 +5757,8 @@ struct nl80211_pattern_support {
  *	%NL80211_ATTR_SCAN_FREQUENCIES contains more than one
  *	frequency, it means that the match occurred in more than one
  *	channel.
+ * @NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC: For wakeup reporting only.
+ *	Wake up happened due to unprotected deauth or disassoc frame in MFP.
  * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
  * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
  *
@@ -5769,6 +5786,7 @@ enum nl80211_wowlan_triggers {
 	NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
 	NL80211_WOWLAN_TRIG_NET_DETECT,
 	NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
+	NL80211_WOWLAN_TRIG_UNPROTECTED_DEAUTH_DISASSOC,
 
 	/* keep last */
 	NUM_NL80211_WOWLAN_TRIG,
@@ -6410,8 +6428,7 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching
  *	(set/del PMKSA operations) in AP mode.
  *
- * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports
- *	filtering of sched scan results using band specific RSSI thresholds.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Obsolete
  *
  * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power
  *	to a station.
@@ -6520,6 +6537,11 @@ enum nl80211_feature_flags {
  *	DFS master on the same channel as described in FCC-594280 D01
  *	(Section B.3). This, for example, allows P2P GO and P2P clients to
  *	operate on DFS channels as long as there's a concurrent BSS connection.
+ *
+ * @NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT: The driver has support for SPP
+ *	(signaling and payload protected) A-MSDUs and this shall be advertised
+ *	in the RSNXE.
+ *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
  */
@@ -6561,7 +6583,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER,
 	NL80211_EXT_FEATURE_AIRTIME_FAIRNESS,
 	NL80211_EXT_FEATURE_AP_PMKSA_CACHING,
-	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD,
+	NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, /* obsolete */
 	NL80211_EXT_FEATURE_EXT_KEY_ID,
 	NL80211_EXT_FEATURE_STA_TX_PWR,
 	NL80211_EXT_FEATURE_SAE_OFFLOAD,
@@ -6594,6 +6616,7 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_OWE_OFFLOAD,
 	NL80211_EXT_FEATURE_OWE_OFFLOAD_AP,
 	NL80211_EXT_FEATURE_DFS_CONCURRENT,
+	NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,