Merge tag 'hwmon-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Delta DPS920AB

   - Flex PIM4006, PIM4328 and PIM4820

   - MPS MP2888

   - Sensirion SHT4X

  Added chip support to existing drivers:

   - Flex BMR310, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, and
     BMR492

   - TI TMP1075

   - Renesas ZLS1003, ZLS4009 and ZL8802

  Other:

   - Dropped explicit ACPI support for MAX31722 and LM70; the APIC IDs
     in those drivers do not exist.

   - Support set_trips() callback into thermal subsystem

   - Minor fixes and improvements in various drivers"

* tag 'hwmon-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (49 commits)
  hwmon: Support set_trips() of thermal device ops
  hwmon: (lm90) Prevent integer underflows of temperature calculations
  hwmon: (lm90) Disable interrupt on suspend
  hwmon: (lm90) Unmask hardware interrupt
  hwmon: (lm90) Use hwmon_notify_event()
  hwmon: (lm90) Don't override interrupt trigger type
  hwmon: (pmbus/dps920ab) Delete some dead code
  hwmon: (ntc_thermistor) Drop unused headers.
  MAINTAINERS: Add Delta DPS920AB PSU driver
  dt-bindings: trivial-devices: Add Delta DPS920AB
  hwmon: (pmbus) Add driver for Delta DPS-920AB PSU
  hwmon: (pmbus/pim4328) Add documentation for the pim4328 PMBus driver
  hwmon: (pmbus/pim4328) Add PMBus driver for PIM4006, PIM4328 and PIM4820
  hwmon: (pmbus) Allow phase function even if it's not on page
  hwmon: (pmbus) Add support for reading direct mode coefficients
  hwmon: (pmbus) Add new pmbus flag NO_WRITE_PROTECT
  docs: hwmon: adm1177.rst: avoid using ReSt :doc:`foo` markup
  hwmon: (pmbus_core) Check adapter PEC support
  hwmon: (ina3221) use CVRF only for single-shot conversion
  hwmon: (max31790) Detect and report zero fan speed
  ...

1 files changed, 30 insertions, 0 deletions

diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h
index 12cbbf305969..fa9f08164c36 100644
--- a/include/linux/pmbus.h
+++ b/include/linux/pmbus.h
@@ -43,6 +43,36 @@
  */
 #define PMBUS_NO_CAPABILITY			BIT(2)
 
+/*
+ * PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+ *
+ * Some PMBus chips end up in an undefined state when trying to read an
+ * unsupported register. For such chips, it is necessary to reset the
+ * chip pmbus controller to a known state after a failed register check.
+ * This can be done by reading a known register. By setting this flag the
+ * driver will try to read the STATUS register after each failed
+ * register check. This read may fail, but it will put the chip in a
+ * known state.
+ */
+#define PMBUS_READ_STATUS_AFTER_FAILED_CHECK	BIT(3)
+
+/*
+ * PMBUS_NO_WRITE_PROTECT
+ *
+ * Some PMBus chips respond with invalid data when reading the WRITE_PROTECT
+ * register. For such chips, this flag should be set so that the PMBus core
+ * driver doesn't use the WRITE_PROTECT command to determine its behavior.
+ */
+#define PMBUS_NO_WRITE_PROTECT			BIT(4)
+
+/*
+ * PMBUS_USE_COEFFICIENTS_CMD
+ *
+ * When this flag is set the PMBus core driver will use the COEFFICIENTS
+ * register to initialize the coefficients for the direct mode format.
+ */
+#define PMBUS_USE_COEFFICIENTS_CMD		BIT(5)
+
 struct pmbus_platform_data {
 	u32 flags;		/* Device specific flags */