Merge tag 'mac80211-next-for-davem-2018-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Various updates across wireless.

One thing to note: I've included a new ethertype
that wireless uses (ETH_P_PREAUTH) in if_ether.h.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 224 insertions, 6 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ee6657a0ed69..8fe7e4306816 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -8,6 +8,7 @@
  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
  * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
  * Copyright (c) 2016 - 2017 Intel Deutschland GmbH
+ * Copyright (c) 2018        Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -2111,7 +2112,7 @@ enum ieee80211_key_len {
 #define FILS_ERP_MAX_REALM_LEN		253
 #define FILS_ERP_MAX_RRK_LEN		64
 
-#define PMK_MAX_LEN			48
+#define PMK_MAX_LEN			64
 
 /* Public action codes (IEEE Std 802.11-2016, 9.6.8.1, Table 9-307) */
 enum ieee80211_pub_actioncode {
@@ -2502,6 +2503,17 @@ static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
 }
 
 /**
+ * ieee80211_get_tid - get qos TID
+ * @hdr: the frame
+ */
+static inline u8 ieee80211_get_tid(struct ieee80211_hdr *hdr)
+{
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+
+	return qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+}
+
+/**
  * ieee80211_get_SA - get pointer to SA
  * @hdr: the frame
  *
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 81174f9b8d14..56e905cd4b07 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1147,6 +1147,7 @@ struct cfg80211_tid_stats {
  * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer
  * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last
  *	(IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs.
+ * @ack_signal: signal strength (in dBm) of the last ACK frame.
  */
 struct station_info {
 	u64 filled;
@@ -1191,6 +1192,7 @@ struct station_info {
 	u64 rx_duration;
 	u8 rx_beacon_signal_avg;
 	struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1];
+	s8 ack_signal;
 };
 
 #if IS_ENABLED(CONFIG_CFG80211)
@@ -1905,11 +1907,16 @@ struct cfg80211_auth_request {
  * @ASSOC_REQ_DISABLE_HT:  Disable HT (802.11n)
  * @ASSOC_REQ_DISABLE_VHT:  Disable VHT
  * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association
+ * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external
+ *	authentication capability. Drivers can offload authentication to
+ *	userspace if this flag is set. Only applicable for cfg80211_connect()
+ *	request (connect callback).
  */
 enum cfg80211_assoc_req_flags {
-	ASSOC_REQ_DISABLE_HT		= BIT(0),
-	ASSOC_REQ_DISABLE_VHT		= BIT(1),
-	ASSOC_REQ_USE_RRM		= BIT(2),
+	ASSOC_REQ_DISABLE_HT			= BIT(0),
+	ASSOC_REQ_DISABLE_VHT			= BIT(1),
+	ASSOC_REQ_USE_RRM			= BIT(2),
+	CONNECT_REQ_EXTERNAL_AUTH_SUPPORT	= BIT(3),
 };
 
 /**
@@ -2601,6 +2608,33 @@ struct cfg80211_pmk_conf {
 };
 
 /**
+ * struct cfg80211_external_auth_params - Trigger External authentication.
+ *
+ * Commonly used across the external auth request and event interfaces.
+ *
+ * @action: action type / trigger for external authentication. Only significant
+ *	for the authentication request event interface (driver to user space).
+ * @bssid: BSSID of the peer with which the authentication has
+ *	to happen. Used by both the authentication request event and
+ *	authentication response command interface.
+ * @ssid: SSID of the AP.  Used by both the authentication request event and
+ *	authentication response command interface.
+ * @key_mgmt_suite: AKM suite of the respective authentication. Used by the
+ *	authentication request event interface.
+ * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication,
+ *	use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you
+ *	the real status code for failures. Used only for the authentication
+ *	response command interface (user space to driver).
+ */
+struct cfg80211_external_auth_params {
+	enum nl80211_external_auth_action action;
+	u8 bssid[ETH_ALEN] __aligned(2);
+	struct cfg80211_ssid ssid;
+	unsigned int key_mgmt_suite;
+	u16 status;
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -2923,6 +2957,9 @@ struct cfg80211_pmk_conf {
  *	(invoked with the wireless_dev mutex held)
  * @del_pmk: delete the previously configured PMK for the given authenticator.
  *	(invoked with the wireless_dev mutex held)
+ *
+ * @external_auth: indicates result of offloaded authentication processing from
+ *     user space
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -3216,6 +3253,8 @@ struct cfg80211_ops {
 			   const struct cfg80211_pmk_conf *conf);
 	int	(*del_pmk)(struct wiphy *wiphy, struct net_device *dev,
 			   const u8 *aa);
+	int     (*external_auth)(struct wiphy *wiphy, struct net_device *dev,
+				 struct cfg80211_external_auth_params *params);
 };
 
 /*
@@ -3517,6 +3556,35 @@ enum wiphy_vendor_command_flags {
 };
 
 /**
+ * enum wiphy_opmode_flag - Station's ht/vht operation mode information flags
+ *
+ * @STA_OPMODE_MAX_BW_CHANGED: Max Bandwidth changed
+ * @STA_OPMODE_SMPS_MODE_CHANGED: SMPS mode changed
+ * @STA_OPMODE_N_SS_CHANGED: max N_SS (number of spatial streams) changed
+ *
+ */
+enum wiphy_opmode_flag {
+	STA_OPMODE_MAX_BW_CHANGED	= BIT(0),
+	STA_OPMODE_SMPS_MODE_CHANGED	= BIT(1),
+	STA_OPMODE_N_SS_CHANGED		= BIT(2),
+};
+
+/**
+ * struct sta_opmode_info - Station's ht/vht operation mode information
+ * @changed: contains value from &enum wiphy_opmode_flag
+ * @smps_mode: New SMPS mode of a station
+ * @bw: new max bandwidth value of a station
+ * @rx_nss: new rx_nss value of a station
+ */
+
+struct sta_opmode_info {
+	u32 changed;
+	u8 smps_mode;
+	u8 bw;
+	u8 rx_nss;
+};
+
+/**
  * struct wiphy_vendor_command - vendor command definition
  * @info: vendor command identifying information, as used in nl80211
  * @flags: flags, see &enum wiphy_vendor_command_flags
@@ -5685,6 +5753,20 @@ void cfg80211_radar_event(struct wiphy *wiphy,
 			  struct cfg80211_chan_def *chandef, gfp_t gfp);
 
 /**
+ * cfg80211_sta_opmode_change_notify - STA's ht/vht operation mode change event
+ * @dev: network device
+ * @mac: MAC address of a station which opmode got modified
+ * @sta_opmode: station's current opmode value
+ * @gfp: context flags
+ *
+ * Driver should call this function when station's opmode modified via action
+ * frame.
+ */
+void cfg80211_sta_opmode_change_notify(struct net_device *dev, const u8 *mac,
+				       struct sta_opmode_info *sta_opmode,
+				       gfp_t gfp);
+
+/**
  * cfg80211_cac_event - Channel availability check (CAC) event
  * @netdev: network device
  * @chandef: chandef for the current channel
@@ -5758,10 +5840,13 @@ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev,
  * @addr: the address of the peer
  * @cookie: the cookie filled in @probe_client previously
  * @acked: indicates whether probe was acked or not
+ * @ack_signal: signal strength (in dBm) of the ACK frame.
+ * @is_valid_ack_signal: indicates the ack_signal is valid or not.
  * @gfp: allocation flags
  */
 void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
-			   u64 cookie, bool acked, gfp_t gfp);
+			   u64 cookie, bool acked, s32 ack_signal,
+			   bool is_valid_ack_signal, gfp_t gfp);
 
 /**
  * cfg80211_report_obss_beacon - report beacon from other APs
@@ -6202,6 +6287,17 @@ void cfg80211_nan_func_terminated(struct wireless_dev *wdev,
 /* ethtool helper */
 void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info);
 
+/**
+ * cfg80211_external_auth_request - userspace request for authentication
+ * @netdev: network device
+ * @params: External authentication parameters
+ * @gfp: allocation flags
+ * Returns: 0 on success, < 0 on error
+ */
+int cfg80211_external_auth_request(struct net_device *netdev,
+				   struct cfg80211_external_auth_params *params,
+				   gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index d91f9e7f4d71..960236fb1681 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -149,6 +149,8 @@ enum ieee80211_radiotap_ampdu_flags {
 	IEEE80211_RADIOTAP_AMPDU_IS_LAST = 0x0008,
 	IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR = 0x0010,
 	IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN = 0x0020,
+	IEEE80211_RADIOTAP_AMPDU_EOF = 0x0040,
+	IEEE80211_RADIOTAP_AMPDU_EOF_KNOWN = 0x0080,
 };
 
 /* for IEEE80211_RADIOTAP_VHT */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 906e90223066..dc3e9d9c3527 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -6,6 +6,7 @@
  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
  * Copyright 2013-2014  Intel Mobile Communications GmbH
  * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
+ * Copyright (C) 2018        Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -934,6 +935,7 @@ struct ieee80211_tx_info {
 			u8 ampdu_len;
 			u8 antenna;
 			u16 tx_time;
+			bool is_valid_ack_signal;
 			void *status_driver_data[19 / sizeof(void *)];
 		} status;
 		struct {
@@ -1098,6 +1100,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  *	the first subframe.
  * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must
  *	be done in the hardware.
+ * @RX_FLAG_AMPDU_EOF_BIT: Value of the EOF bit in the A-MPDU delimiter for this
+ *	frame
+ * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1124,6 +1129,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_MIC_STRIPPED		= BIT(21),
 	RX_FLAG_ALLOW_SAME_PN		= BIT(22),
 	RX_FLAG_ICV_STRIPPED		= BIT(23),
+	RX_FLAG_AMPDU_EOF_BIT		= BIT(24),
+	RX_FLAG_AMPDU_EOF_BIT_KNOWN	= BIT(25),
 };
 
 /**
@@ -2063,6 +2070,14 @@ struct ieee80211_txq {
  * @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware supports buffer STA on
  *	TDLS links.
  *
+ * @IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP: The driver requires the
+ *	mgd_prepare_tx() callback to be called before transmission of a
+ *	deauthentication frame in case the association was completed but no
+ *	beacon was heard. This is required in multi-channel scenarios, where the
+ *	virtual interface might not be given air time for the transmission of
+ *	the frame, as it is not synced with the AP/P2P GO yet, and thus the
+ *	deauthentication frame might not be transmitted.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -2106,6 +2121,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_REPORTS_LOW_ACK,
 	IEEE80211_HW_SUPPORTS_TX_FRAG,
 	IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA,
+	IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -3350,6 +3366,9 @@ enum ieee80211_reconfig_type {
  *	management frame prior to having successfully associated to allow the
  *	driver to give it channel time for the transmission, to get a response
  *	and to be able to synchronize with the GO.
+ *	For drivers that set %IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP, mac80211
+ *	would also call this function before transmitting a deauthentication
+ *	frame in case that no beacon was heard from the AP/P2P GO.
  *	The callback will be called before each transmission and upon return
  *	mac80211 will transmit the frame right away.
  *	The callback is optional and can (should!) sleep.
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index 8bbbcb5cd94b..2e4a6c1accaa 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -88,6 +88,7 @@
 #define ETH_P_AOE	0x88A2		/* ATA over Ethernet		*/
 #define ETH_P_8021AD	0x88A8          /* 802.1ad Service VLAN		*/
 #define ETH_P_802_EX1	0x88B5		/* 802.1 Local Experimental 1.  */
+#define ETH_P_PREAUTH	0x88C7		/* 802.11 Preauthentication */
 #define ETH_P_TIPC	0x88CA		/* TIPC 			*/
 #define ETH_P_MACSEC	0x88E5		/* 802.1ae MACsec */
 #define ETH_P_8021AH	0x88E7          /* 802.1ah Backbone Service Tag */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c587a61c32bf..c13c84304be3 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -992,6 +992,32 @@
  *
  * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
  *
+ * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host
+ *	drivers that do not define separate commands for authentication and
+ *	association, but rely on user space for the authentication to happen.
+ *	This interface acts both as the event request (driver to user space)
+ *	to trigger the authentication and command response (userspace to
+ *	driver) to indicate the authentication status.
+ *
+ *	User space uses the %NL80211_CMD_CONNECT command to the host driver to
+ *	trigger a connection. The host driver selects a BSS and further uses
+ *	this interface to offload only the authentication part to the user
+ *	space. Authentication frames are passed between the driver and user
+ *	space through the %NL80211_CMD_FRAME interface. Host driver proceeds
+ *	further with the association after getting successful authentication
+ *	status. User space indicates the authentication status through
+ *	%NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH
+ *	command interface.
+ *
+ *	Host driver reports this status on an authentication failure to the
+ *	user space through the connect result as the user space would have
+ *	initiated the connection through the connect request.
+ *
+ * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's
+ *	ht opmode or vht opmode changes using any of &NL80211_ATTR_SMPS_MODE,
+ *	&NL80211_ATTR_CHANNEL_WIDTH,&NL80211_ATTR_NSS attributes with its
+ *	address(specified in &NL80211_ATTR_MAC).
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1198,6 +1224,10 @@ enum nl80211_commands {
 
 	NL80211_CMD_RELOAD_REGDB,
 
+	NL80211_CMD_EXTERNAL_AUTH,
+
+	NL80211_CMD_STA_OPMODE_CHANGED,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2153,6 +2183,19 @@ enum nl80211_commands {
  * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
  * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
  *
+ * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external
+ *     authentication operation (u32 attribute with an
+ *     &enum nl80211_external_auth_action value). This is used with the
+ *     &NL80211_CMD_EXTERNAL_AUTH request event.
+ * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user
+ *     space supports external authentication. This attribute shall be used
+ *     only with %NL80211_CMD_CONNECT request. The driver may offload
+ *     authentication processing to user space if this capability is indicated
+ *     in NL80211_CMD_CONNECT requests from the user space.
+ *
+ * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
+ *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2579,6 +2622,12 @@ enum nl80211_attrs {
 	NL80211_ATTR_PMKR0_NAME,
 	NL80211_ATTR_PORT_AUTHORIZED,
 
+	NL80211_ATTR_EXTERNAL_AUTH_ACTION,
+	NL80211_ATTR_EXTERNAL_AUTH_SUPPORT,
+
+	NL80211_ATTR_NSS,
+	NL80211_ATTR_ACK_SIGNAL,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2899,6 +2948,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames
  *	received from the station (u64, usec)
  * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment
+ * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -2937,6 +2987,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_TID_STATS,
 	NL80211_STA_INFO_RX_DURATION,
 	NL80211_STA_INFO_PAD,
+	NL80211_STA_INFO_ACK_SIGNAL,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -4945,6 +4996,9 @@ enum nl80211_feature_flags {
  *	probe request tx deferral and suppression
  * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
  *	value in %NL80211_ATTR_USE_MFP.
+ * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan.
+ * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan.
+ * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4972,6 +5026,9 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
 	NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
 	NL80211_EXT_FEATURE_MFP_OPTIONAL,
+	NL80211_EXT_FEATURE_LOW_SPAN_SCAN,
+	NL80211_EXT_FEATURE_LOW_POWER_SCAN,
+	NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5032,6 +5089,10 @@ enum nl80211_timeout_reason {
  * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN
  * requests.
  *
+ * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and
+ * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only
+ * one of them can be used in the request.
+ *
  * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority
  * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning
  * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured
@@ -5059,7 +5120,20 @@ enum nl80211_timeout_reason {
  *	and suppression (if it has received a broadcast Probe Response frame,
  *	Beacon frame or FILS Discovery frame from an AP that the STA considers
  *	a suitable candidate for (re-)association - suitable in terms of
- *	SSID and/or RSSI
+ *	SSID and/or RSSI.
+ * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to
+ *	accomplish the scan. Thus, this flag intends the driver to perform the
+ *	scan request with lesser span/duration. It is specific to the driver
+ *	implementations on how this is accomplished. Scan accuracy may get
+ *	impacted with this flag.
+ * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume
+ *	optimal possible power. Drivers can resort to their specific means to
+ *	optimize the power. Scan accuracy may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan
+ *	results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum
+ *	possible scan results. This flag hints the driver to use the best
+ *	possible scan configuration to improve the accuracy in scanning.
+ *	Latency and power use may get impacted with this flag.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -5070,6 +5144,9 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP		= 1<<5,
 	NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE		= 1<<6,
 	NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION	= 1<<7,
+	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
+	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
+	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
 };
 
 /**
@@ -5469,4 +5546,15 @@ enum nl80211_nan_match_attributes {
 	NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1
 };
 
+/**
+ * nl80211_external_auth_action - Action to perform with external
+ *     authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION.
+ * @NL80211_EXTERNAL_AUTH_START: Start the authentication.
+ * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication.
+ */
+enum nl80211_external_auth_action {
+	NL80211_EXTERNAL_AUTH_START,
+	NL80211_EXTERNAL_AUTH_ABORT,
+};
+
 #endif /* __LINUX_NL80211_H */