Merge tag 'mac80211-next-for-davem-2015-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Lots of updates for net-next for this cycle. As usual, we have
a lot of small fixes and cleanups, the bigger items are:
 * proper mac80211 rate control locking, to fix some random crashes
   (this required changing other locking as well)
 * mac80211 "fast-xmit", a mechanism to reduce, in most cases, the
   amount of code we execute while going from ndo_start_xmit() to
   the driver
 * this also clears the way for properly supporting S/G and checksum
   and segmentation offloads
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 113 insertions, 80 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f8d6813cd5b2..d63ecec73090 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -111,7 +111,7 @@ enum ieee80211_band {
  *	This may be due to the driver or due to regulatory bandwidth
  *	restrictions.
  * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY
- * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @IEEE80211_CHAN_IR_CONCURRENT: see %NL80211_FREQUENCY_ATTR_IR_CONCURRENT
  * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted
  *	on this channel.
  * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted
@@ -129,7 +129,7 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_NO_80MHZ		= 1<<7,
 	IEEE80211_CHAN_NO_160MHZ	= 1<<8,
 	IEEE80211_CHAN_INDOOR_ONLY	= 1<<9,
-	IEEE80211_CHAN_GO_CONCURRENT	= 1<<10,
+	IEEE80211_CHAN_IR_CONCURRENT	= 1<<10,
 	IEEE80211_CHAN_NO_20MHZ		= 1<<11,
 	IEEE80211_CHAN_NO_10MHZ		= 1<<12,
 };
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b4bef1152c05..67e0df14ba0f 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -337,10 +337,16 @@ enum ieee80211_bss_change {
  * enum ieee80211_event_type - event to be notified to the low level driver
  * @RSSI_EVENT: AP's rssi crossed the a threshold set by the driver.
  * @MLME_EVENT: event related to MLME
+ * @BAR_RX_EVENT: a BAR was received
+ * @BA_FRAME_TIMEOUT: Frames were released from the reordering buffer because
+ *	they timed out. This won't be called for each frame released, but only
+ *	once each time the timeout triggers.
  */
 enum ieee80211_event_type {
 	RSSI_EVENT,
 	MLME_EVENT,
+	BAR_RX_EVENT,
+	BA_FRAME_TIMEOUT,
 };
 
 /**
@@ -354,7 +360,7 @@ enum ieee80211_rssi_event_data {
 };
 
 /**
- * enum ieee80211_rssi_event - data attached to an %RSSI_EVENT
+ * struct ieee80211_rssi_event - data attached to an %RSSI_EVENT
  * @data: See &enum ieee80211_rssi_event_data
  */
 struct ieee80211_rssi_event {
@@ -388,7 +394,7 @@ enum ieee80211_mlme_event_status {
 };
 
 /**
- * enum ieee80211_mlme_event - data attached to an %MLME_EVENT
+ * struct ieee80211_mlme_event - data attached to an %MLME_EVENT
  * @data: See &enum ieee80211_mlme_event_data
  * @status: See &enum ieee80211_mlme_event_status
  * @reason: the reason code if applicable
@@ -400,16 +406,31 @@ struct ieee80211_mlme_event {
 };
 
 /**
+ * struct ieee80211_ba_event - data attached for BlockAck related events
+ * @sta: pointer to the &ieee80211_sta to which this event relates
+ * @tid: the tid
+ * @ssn: the starting sequence number (for %BAR_RX_EVENT)
+ */
+struct ieee80211_ba_event {
+	struct ieee80211_sta *sta;
+	u16 tid;
+	u16 ssn;
+};
+
+/**
  * struct ieee80211_event - event to be sent to the driver
- * @type The event itself. See &enum ieee80211_event_type.
+ * @type: The event itself. See &enum ieee80211_event_type.
  * @rssi: relevant if &type is %RSSI_EVENT
  * @mlme: relevant if &type is %AUTH_EVENT
+ * @ba: relevant if &type is %BAR_RX_EVENT or %BA_FRAME_TIMEOUT
+ * @u:union holding the fields above
  */
 struct ieee80211_event {
 	enum ieee80211_event_type type;
 	union {
 		struct ieee80211_rssi_event rssi;
 		struct ieee80211_mlme_event mlme;
+		struct ieee80211_ba_event ba;
 	} u;
 };
 
@@ -1480,6 +1501,47 @@ struct ieee80211_key_conf {
 	u8 key[0];
 };
 
+#define IEEE80211_MAX_PN_LEN	16
+
+/**
+ * struct ieee80211_key_seq - key sequence counter
+ *
+ * @tkip: TKIP data, containing IV32 and IV16 in host byte order
+ * @ccmp: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @aes_cmac: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @aes_gmac: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @gcmp: PN data, most significant byte first (big endian,
+ *	reverse order than in packet)
+ * @hw: data for HW-only (e.g. cipher scheme) keys
+ */
+struct ieee80211_key_seq {
+	union {
+		struct {
+			u32 iv32;
+			u16 iv16;
+		} tkip;
+		struct {
+			u8 pn[6];
+		} ccmp;
+		struct {
+			u8 pn[6];
+		} aes_cmac;
+		struct {
+			u8 pn[6];
+		} aes_gmac;
+		struct {
+			u8 pn[6];
+		} gcmp;
+		struct {
+			u8 seq[IEEE80211_MAX_PN_LEN];
+			u8 seq_len;
+		} hw;
+	};
+};
+
 /**
  * struct ieee80211_cipher_scheme - cipher scheme
  *
@@ -1795,6 +1857,10 @@ struct ieee80211_txq {
  *	the driver returns 1. This also forces the driver to advertise its
  *	supported cipher suites.
  *
+ * @IEEE80211_HW_SUPPORT_FAST_XMIT: The driver/hardware supports fast-xmit,
+ *	this currently requires only the ability to calculate the duration
+ *	for frames.
+ *
  * @IEEE80211_HW_QUEUE_CONTROL: The driver wants to control per-interface
  *	queue mapping in order to use different queues (not just one per AC)
  *	for different virtual interfaces. See the doc section on HW queue
@@ -1843,7 +1909,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_WANT_MONITOR_VIF			= 1<<14,
 	IEEE80211_HW_NO_AUTO_VIF			= 1<<15,
 	IEEE80211_HW_SW_CRYPTO_CONTROL			= 1<<16,
-	/* free slots */
+	IEEE80211_HW_SUPPORT_FAST_XMIT			= 1<<17,
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
 	IEEE80211_HW_QUEUE_CONTROL			= 1<<20,
@@ -1937,8 +2003,8 @@ enum ieee80211_hw_flags {
  *	Use the %IEEE80211_RADIOTAP_VHT_KNOWN_* values.
  *
  * @netdev_features: netdev features to be set in each netdev created
- *	from this HW. Note only HW checksum features are currently
- *	compatible with mac80211. Other feature bits will be rejected.
+ *	from this HW. Note that not all features are usable with mac80211,
+ *	other features will be rejected during HW registration.
  *
  * @uapsd_queues: This bitmap is included in (re)association frame to indicate
  *	for each access category if it is uAPSD trigger-enabled and delivery-
@@ -2502,10 +2568,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * stack. It is always safe to pass more frames than requested,
  * but this has negative impact on power consumption.
  *
- * @FIF_PROMISC_IN_BSS: promiscuous mode within your BSS,
- *	think of the BSS as your network segment and then this corresponds
- *	to the regular ethernet device promiscuous mode.
- *
  * @FIF_ALLMULTI: pass all multicast frames, this is used if requested
  *	by the user or if the hardware is not capable of filtering by
  *	multicast address.
@@ -2522,8 +2584,8 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  *	mac80211 needs to do and the amount of CPU wakeups, so you should
  *	honour this flag if possible.
  *
- * @FIF_CONTROL: pass control frames (except for PS Poll), if PROMISC_IN_BSS
- * 	is not set then only those addressed to this station.
+ * @FIF_CONTROL: pass control frames (except for PS Poll) addressed to this
+ *	station
  *
  * @FIF_OTHER_BSS: pass frames destined to other BSSes
  *
@@ -2533,7 +2595,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
  * @FIF_PROBE_REQ: pass probe request frames
  */
 enum ieee80211_filter_flags {
-	FIF_PROMISC_IN_BSS	= 1<<0,
 	FIF_ALLMULTI		= 1<<1,
 	FIF_FCSFAIL		= 1<<2,
 	FIF_PLCPFAIL		= 1<<3,
@@ -2816,9 +2877,9 @@ enum ieee80211_reconfig_type {
  * 	Returns zero if statistics are available.
  *	The callback can sleep.
  *
- * @get_tkip_seq: If your device implements TKIP encryption in hardware this
- *	callback should be provided to read the TKIP transmit IVs (both IV32
- *	and IV16) for the given key from hardware.
+ * @get_key_seq: If your device implements encryption in hardware and does
+ *	IV/PN assignment then this callback should be provided to read the
+ *	IV/PN for the given key from hardware.
  *	The callback must be atomic.
  *
  * @set_frag_threshold: Configuration of fragmentation threshold. Assign this
@@ -3001,7 +3062,7 @@ enum ieee80211_reconfig_type {
  *	The callback can sleep.
  * @event_callback: Notify driver about any event in mac80211. See
  *	&enum ieee80211_event_type for the different types.
- *	The callback can sleep.
+ *	The callback must be atomic.
  *
  * @release_buffered_frames: Release buffered frames according to the given
  *	parameters. In the case where the driver buffers some frames for
@@ -3217,8 +3278,9 @@ struct ieee80211_ops {
 				 struct ieee80211_vif *vif);
 	int (*get_stats)(struct ieee80211_hw *hw,
 			 struct ieee80211_low_level_stats *stats);
-	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
-			     u32 *iv32, u16 *iv16);
+	void (*get_key_seq)(struct ieee80211_hw *hw,
+			    struct ieee80211_key_conf *key,
+			    struct ieee80211_key_seq *seq);
 	int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
 	int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
 	int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -3466,14 +3528,15 @@ enum ieee80211_tpt_led_trigger_flags {
 };
 
 #ifdef CONFIG_MAC80211_LEDS
-char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
-char *__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
-					 unsigned int flags,
-					 const struct ieee80211_tpt_blink *blink_table,
-					 unsigned int blink_table_len);
+const char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
+const char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
+const char *
+__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
+				   unsigned int flags,
+				   const struct ieee80211_tpt_blink *blink_table,
+				   unsigned int blink_table_len);
 #endif
 /**
  * ieee80211_get_tx_led_name - get name of TX LED
@@ -3487,7 +3550,7 @@ char *__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
  *
  * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
-static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
 {
 #ifdef CONFIG_MAC80211_LEDS
 	return __ieee80211_get_tx_led_name(hw);
@@ -3508,7 +3571,7 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
  *
  * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
-static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
 {
 #ifdef CONFIG_MAC80211_LEDS
 	return __ieee80211_get_rx_led_name(hw);
@@ -3529,7 +3592,7 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
  *
  * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
-static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
 {
 #ifdef CONFIG_MAC80211_LEDS
 	return __ieee80211_get_assoc_led_name(hw);
@@ -3550,7 +3613,7 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
  *
  * Return: The name of the LED trigger. %NULL if not configured for LEDs.
  */
-static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
+static inline const char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
 {
 #ifdef CONFIG_MAC80211_LEDS
 	return __ieee80211_get_radio_led_name(hw);
@@ -3571,7 +3634,7 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
  *
  * Note: This function must be called before ieee80211_register_hw().
  */
-static inline char *
+static inline const char *
 ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
 				 const struct ieee80211_tpt_blink *blink_table,
 				 unsigned int blink_table_len)
@@ -4252,40 +4315,6 @@ void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
 					u8 *k1, u8 *k2);
 
 /**
- * struct ieee80211_key_seq - key sequence counter
- *
- * @tkip: TKIP data, containing IV32 and IV16 in host byte order
- * @ccmp: PN data, most significant byte first (big endian,
- *	reverse order than in packet)
- * @aes_cmac: PN data, most significant byte first (big endian,
- *	reverse order than in packet)
- * @aes_gmac: PN data, most significant byte first (big endian,
- *	reverse order than in packet)
- * @gcmp: PN data, most significant byte first (big endian,
- *	reverse order than in packet)
- */
-struct ieee80211_key_seq {
-	union {
-		struct {
-			u32 iv32;
-			u16 iv16;
-		} tkip;
-		struct {
-			u8 pn[6];
-		} ccmp;
-		struct {
-			u8 pn[6];
-		} aes_cmac;
-		struct {
-			u8 pn[6];
-		} aes_gmac;
-		struct {
-			u8 pn[6];
-		} gcmp;
-	};
-};
-
-/**
  * ieee80211_get_key_tx_seq - get key TX sequence counter
  *
  * @keyconf: the parameter passed with the set key
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 241220c43e86..c0ab6b0a3919 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2620,16 +2620,17 @@ enum nl80211_band_attr {
  *	an indoor surroundings, i.e., it is connected to AC power (and not
  *	through portable DC inverters) or is under the control of a master
  *	that is acting as an AP and is connected to AC power.
- * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this
+ * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this
  *	channel if it's connected concurrently to a BSS on the same channel on
  *	the 2 GHz band or to a channel in the same UNII band (on the 5 GHz
- *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a
- *	channel that has the GO_CONCURRENT attribute set can be done when there
- *	is a clear assessment that the device is operating under the guidance of
- *	an authorized master, i.e., setting up a GO while the device is also
- *	connected to an AP with DFS and radar detection on the UNII band (it is
- *	up to user-space, i.e., wpa_supplicant to perform the required
- *	verifications)
+ *	band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS
+ *	off-channel on a channel that has the IR_CONCURRENT attribute set can be
+ *	done when there is a clear assessment that the device is operating under
+ *	the guidance of an authorized master, i.e., setting up a GO or TDLS
+ *	off-channel while the device is also connected to an AP with DFS and
+ *	radar detection on the UNII band (it is up to user-space, i.e.,
+ *	wpa_supplicant to perform the required verifications). Using this
+ *	attribute for IR is disallowed for master interfaces (IBSS, AP).
  * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed
@@ -2641,7 +2642,7 @@ enum nl80211_band_attr {
  * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122
  * for more information on the FCC description of the relaxations allowed
  * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and
- * NL80211_FREQUENCY_ATTR_GO_CONCURRENT.
+ * NL80211_FREQUENCY_ATTR_IR_CONCURRENT.
  */
 enum nl80211_frequency_attr {
 	__NL80211_FREQUENCY_ATTR_INVALID,
@@ -2659,7 +2660,7 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_NO_160MHZ,
 	NL80211_FREQUENCY_ATTR_DFS_CAC_TIME,
 	NL80211_FREQUENCY_ATTR_INDOOR_ONLY,
-	NL80211_FREQUENCY_ATTR_GO_CONCURRENT,
+	NL80211_FREQUENCY_ATTR_IR_CONCURRENT,
 	NL80211_FREQUENCY_ATTR_NO_20MHZ,
 	NL80211_FREQUENCY_ATTR_NO_10MHZ,
 
@@ -2672,6 +2673,8 @@ enum nl80211_frequency_attr {
 #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN	NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_NO_IBSS		NL80211_FREQUENCY_ATTR_NO_IR
 #define NL80211_FREQUENCY_ATTR_NO_IR		NL80211_FREQUENCY_ATTR_NO_IR
+#define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \
+					NL80211_FREQUENCY_ATTR_IR_CONCURRENT
 
 /**
  * enum nl80211_bitrate_attr - bitrate attributes
@@ -2830,7 +2833,7 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
  *	base on contiguous rules and wider channels will be allowed to cross
  *	multiple contiguous/overlapping frequency ranges.
- * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
+ * @NL80211_RRF_IR_CONCURRENT: See &NL80211_FREQUENCY_ATTR_IR_CONCURRENT
  * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
  * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
@@ -2847,7 +2850,7 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_IR		= 1<<7,
 	__NL80211_RRF_NO_IBSS		= 1<<8,
 	NL80211_RRF_AUTO_BW		= 1<<11,
-	NL80211_RRF_GO_CONCURRENT	= 1<<12,
+	NL80211_RRF_IR_CONCURRENT	= 1<<12,
 	NL80211_RRF_NO_HT40MINUS	= 1<<13,
 	NL80211_RRF_NO_HT40PLUS		= 1<<14,
 	NL80211_RRF_NO_80MHZ		= 1<<15,
@@ -2859,6 +2862,7 @@ enum nl80211_reg_rule_flags {
 #define NL80211_RRF_NO_IR		NL80211_RRF_NO_IR
 #define NL80211_RRF_NO_HT40		(NL80211_RRF_NO_HT40MINUS |\
 					 NL80211_RRF_NO_HT40PLUS)
+#define NL80211_RRF_GO_CONCURRENT	NL80211_RRF_IR_CONCURRENT
 
 /* For backport compatibility with older userspace */
 #define NL80211_RRF_NO_IR_ALL		(NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)