Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

1 files changed, 48 insertions, 0 deletions

diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index feb59380c896..793ecff29038 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -3,6 +3,10 @@
 
 #include <linux/sched/cputime.h>
 
+#include <linux/bpf.h>
+#include <linux/btf.h>
+#include <linux/btf_ids.h>
+
 static DEFINE_SPINLOCK(cgroup_rstat_lock);
 static DEFINE_PER_CPU(raw_spinlock_t, cgroup_rstat_cpu_lock);
 
@@ -141,6 +145,31 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
 	return pos;
 }
 
+/*
+ * A hook for bpf stat collectors to attach to and flush their stats.
+ * Together with providing bpf kfuncs for cgroup_rstat_updated() and
+ * cgroup_rstat_flush(), this enables a complete workflow where bpf progs that
+ * collect cgroup stats can integrate with rstat for efficient flushing.
+ *
+ * A static noinline declaration here could cause the compiler to optimize away
+ * the function. A global noinline declaration will keep the definition, but may
+ * optimize away the callsite. Therefore, __weak is needed to ensure that the
+ * call is still emitted, by telling the compiler that we don't know what the
+ * function might eventually be.
+ *
+ * __diag_* below are needed to dismiss the missing prototype warning.
+ */
+__diag_push();
+__diag_ignore_all("-Wmissing-prototypes",
+		  "kfuncs which will be used in BPF programs");
+
+__weak noinline void bpf_rstat_flush(struct cgroup *cgrp,
+				     struct cgroup *parent, int cpu)
+{
+}
+
+__diag_pop();
+
 /* see cgroup_rstat_flush() */
 static void cgroup_rstat_flush_locked(struct cgroup *cgrp, bool may_sleep)
 	__releases(&cgroup_rstat_lock) __acquires(&cgroup_rstat_lock)
@@ -168,6 +197,7 @@ static void cgroup_rstat_flush_locked(struct cgroup *cgrp, bool may_sleep)
 			struct cgroup_subsys_state *css;
 
 			cgroup_base_stat_flush(pos, cpu);
+			bpf_rstat_flush(pos, cgroup_parent(pos), cpu);
 
 			rcu_read_lock();
 			list_for_each_entry_rcu(css, &pos->rstat_css_list,
@@ -501,3 +531,21 @@ void cgroup_base_stat_cputime_show(struct seq_file *seq)
 	seq_printf(seq, "core_sched.force_idle_usec %llu\n", forceidle_time);
 #endif
 }
+
+/* Add bpf kfuncs for cgroup_rstat_updated() and cgroup_rstat_flush() */
+BTF_SET8_START(bpf_rstat_kfunc_ids)
+BTF_ID_FLAGS(func, cgroup_rstat_updated)
+BTF_ID_FLAGS(func, cgroup_rstat_flush, KF_SLEEPABLE)
+BTF_SET8_END(bpf_rstat_kfunc_ids)
+
+static const struct btf_kfunc_id_set bpf_rstat_kfunc_set = {
+	.owner          = THIS_MODULE,
+	.set            = &bpf_rstat_kfunc_ids,
+};
+
+static int __init bpf_rstat_kfunc_init(void)
+{
+	return register_btf_kfunc_id_set(BPF_PROG_TYPE_TRACING,
+					 &bpf_rstat_kfunc_set);
+}
+late_initcall(bpf_rstat_kfunc_init);