Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

3 files changed, 47 insertions, 23 deletions

diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 02ee440f7be3..3509115a0e85 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -389,6 +389,15 @@ config PAHOLE_HAS_BTF_TAG
 	  btf_decl_tag) or not. Currently only clang compiler implements
 	  these attributes, so make the config depend on CC_IS_CLANG.
 
+config PAHOLE_HAS_LANG_EXCLUDE
+	def_bool PAHOLE_VERSION >= 124
+	help
+	  Support for the --lang_exclude flag which makes pahole exclude
+	  compilation units from the supplied language. Used in Kbuild to
+	  omit Rust CUs which are not supported in version 1.24 of pahole,
+	  otherwise it would emit malformed kernel and module binaries when
+	  using DEBUG_INFO_BTF_MODULES.
+
 config DEBUG_INFO_BTF_MODULES
 	def_bool y
 	depends on DEBUG_INFO_BTF && MODULES && PAHOLE_HAS_SPLIT_BTF
diff --git a/lib/cpumask.c b/lib/cpumask.c
index c7c392514fd3..e7258836b60b 100644
--- a/lib/cpumask.c
+++ b/lib/cpumask.c
@@ -110,15 +110,33 @@ void __init free_bootmem_cpumask_var(cpumask_var_t mask)
 #endif
 
 /**
- * cpumask_local_spread - select the i'th cpu with local numa cpu's first
+ * cpumask_local_spread - select the i'th cpu based on NUMA distances
  * @i: index number
  * @node: local numa_node
  *
- * This function selects an online CPU according to a numa aware policy;
- * local cpus are returned first, followed by non-local ones, then it
- * wraps around.
+ * Returns online CPU according to a numa aware policy; local cpus are returned
+ * first, followed by non-local ones, then it wraps around.
  *
- * It's not very efficient, but useful for setup.
+ * For those who wants to enumerate all CPUs based on their NUMA distances,
+ * i.e. call this function in a loop, like:
+ *
+ * for (i = 0; i < num_online_cpus(); i++) {
+ *	cpu = cpumask_local_spread(i, node);
+ *	do_something(cpu);
+ * }
+ *
+ * There's a better alternative based on for_each()-like iterators:
+ *
+ *	for_each_numa_hop_mask(mask, node) {
+ *		for_each_cpu_andnot(cpu, mask, prev)
+ *			do_something(cpu);
+ *		prev = mask;
+ *	}
+ *
+ * It's simpler and more verbose than above. Complexity of iterator-based
+ * enumeration is O(sched_domains_numa_levels * nr_cpu_ids), while
+ * cpumask_local_spread() when called for each cpu is
+ * O(sched_domains_numa_levels * nr_cpu_ids * log(nr_cpu_ids)).
  */
 unsigned int cpumask_local_spread(unsigned int i, int node)
 {
@@ -127,24 +145,12 @@ unsigned int cpumask_local_spread(unsigned int i, int node)
 	/* Wrap: we always want a cpu. */
 	i %= num_online_cpus();
 
-	if (node == NUMA_NO_NODE) {
-		cpu = cpumask_nth(i, cpu_online_mask);
-		if (cpu < nr_cpu_ids)
-			return cpu;
-	} else {
-		/* NUMA first. */
-		cpu = cpumask_nth_and(i, cpu_online_mask, cpumask_of_node(node));
-		if (cpu < nr_cpu_ids)
-			return cpu;
-
-		i -= cpumask_weight_and(cpu_online_mask, cpumask_of_node(node));
-
-		/* Skip NUMA nodes, done above. */
-		cpu = cpumask_nth_andnot(i, cpu_online_mask, cpumask_of_node(node));
-		if (cpu < nr_cpu_ids)
-			return cpu;
-	}
-	BUG();
+	cpu = (node == NUMA_NO_NODE) ?
+		cpumask_nth(i, cpu_online_mask) :
+		sched_numa_find_nth_cpu(cpu_online_mask, i, node);
+
+	WARN_ON(cpu >= nr_cpu_ids);
+	return cpu;
 }
 EXPORT_SYMBOL(cpumask_local_spread);
 
diff --git a/lib/find_bit.c b/lib/find_bit.c
index 18bc0a7ac8ee..c10920e66788 100644
--- a/lib/find_bit.c
+++ b/lib/find_bit.c
@@ -155,6 +155,15 @@ unsigned long __find_nth_andnot_bit(const unsigned long *addr1, const unsigned l
 }
 EXPORT_SYMBOL(__find_nth_andnot_bit);
 
+unsigned long __find_nth_and_andnot_bit(const unsigned long *addr1,
+					const unsigned long *addr2,
+					const unsigned long *addr3,
+					unsigned long size, unsigned long n)
+{
+	return FIND_NTH_BIT(addr1[idx] & addr2[idx] & ~addr3[idx], size, n);
+}
+EXPORT_SYMBOL(__find_nth_and_andnot_bit);
+
 #ifndef find_next_and_bit
 unsigned long _find_next_and_bit(const unsigned long *addr1, const unsigned long *addr2,
 					unsigned long nbits, unsigned long start)