userfaultfd: UFFD_FEATURE_WP_ASYNC

Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.

*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1].  The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.

This syscall is used in Windows applications and games etc.  This syscall
is being emulated in pretty slow manner in userspace.  Our purpose is to
enhance the kernel such that we translate it efficiently in a better way. 
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels.  We intend to replace those with these
patches.  So the whole gaming on Linux can effectively get benefit from
this.  It means there would be tons of users of this code.

CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.

Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
  effectively. The current interface can clear dirty bits for the entire
  process only. In addition, reading info about pages is a separate
  operation. It means we must freeze the process to read information
  about all its pages, reset dirty bits, only then we can start dumping
  pages. The information about pages becomes more and more outdated,
  while we are processing pages. The new interface solves both these
  downsides. First, it allows us to read pte bits and clear the
  soft-dirty bit atomically. It means that CRIU will not need to freeze
  processes to pre-dump their memory. Second, it clears soft-dirty bits
  for a specified region of memory. It means CRIU will have actual info
  about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
  is happening in the kernel. With the old interface, we have to read
  pagemap for each page.

*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically

So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.

At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)

All the different masks were added on the request of CRIU devs to create
interface more generic and better.

[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com


This patch (of 6):

Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.

It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).

Several goals of such a dirty tracking interface:

1. All types of memory should be supported and tracable. This is nature
   for soft-dirty but should mention when the context is userfaultfd,
   because it used to only support anon/shmem/hugetlb. The problem is for
   a dirty tracking purpose these three types may not be enough, and it's
   legal to track anything e.g. any page cache writes from mmap.

2. Protections can be applied to partial of a memory range, without vma
   split/merge fuss.  The hope is that the tracking itself should not
   affect any vma layout change.  It also helps when reset happens because
   the reset will not need mmap write lock which can block the tracee.

3. Accuracy needs to be maintained.  This means we need pte markers to work
   on any type of VMA.

One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:

1. VM_UFFD_WP vma flag, which has a very good name to suite something like
   this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
   feature bit to identify from a sync version of uffd-wp registration.

2. PTE markers logic can be leveraged across the whole kernel to maintain
   the uffd-wp bit as long as an arch supports, this also applies to this
   case where uffd-wp bit will be a hint to dirty information and it will
   not go lost easily (e.g. when some page cache ptes got zapped).

3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
   resetting a range of memory, while there's no counterpart in the old
   soft-dirty world, hence if this is wanted in a new design we'll need a
   new interface otherwise.

We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.

This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE.  This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels.  It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.

vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp.  So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).

One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.

The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts.  Soft-dirty doesn't do it like that. 
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet).  One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+.  That will
not change the interface if to implemented, so we can leave that for
later.

Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

1 files changed, 25 insertions, 3 deletions

diff --git a/mm/memory.c b/mm/memory.c
index 2d209bc4d18c..d0f61d729fb4 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1,3 +1,4 @@
+
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  *  linux/mm/memory.c
@@ -3349,11 +3350,28 @@ static vm_fault_t do_wp_page(struct vm_fault *vmf)
 	const bool unshare = vmf->flags & FAULT_FLAG_UNSHARE;
 	struct vm_area_struct *vma = vmf->vma;
 	struct folio *folio = NULL;
+	pte_t pte;
 
 	if (likely(!unshare)) {
 		if (userfaultfd_pte_wp(vma, ptep_get(vmf->pte))) {
-			pte_unmap_unlock(vmf->pte, vmf->ptl);
-			return handle_userfault(vmf, VM_UFFD_WP);
+			if (!userfaultfd_wp_async(vma)) {
+				pte_unmap_unlock(vmf->pte, vmf->ptl);
+				return handle_userfault(vmf, VM_UFFD_WP);
+			}
+
+			/*
+			 * Nothing needed (cache flush, TLB invalidations,
+			 * etc.) because we're only removing the uffd-wp bit,
+			 * which is completely invisible to the user.
+			 */
+			pte = pte_clear_uffd_wp(ptep_get(vmf->pte));
+
+			set_pte_at(vma->vm_mm, vmf->address, vmf->pte, pte);
+			/*
+			 * Update this to be prepared for following up CoW
+			 * handling
+			 */
+			vmf->orig_pte = pte;
 		}
 
 		/*
@@ -4879,8 +4897,11 @@ static inline vm_fault_t wp_huge_pmd(struct vm_fault *vmf)
 
 	if (vma_is_anonymous(vma)) {
 		if (likely(!unshare) &&
-		    userfaultfd_huge_pmd_wp(vma, vmf->orig_pmd))
+		    userfaultfd_huge_pmd_wp(vma, vmf->orig_pmd)) {
+			if (userfaultfd_wp_async(vmf->vma))
+				goto split;
 			return handle_userfault(vmf, VM_UFFD_WP);
+		}
 		return do_huge_pmd_wp_page(vmf);
 	}
 
@@ -4892,6 +4913,7 @@ static inline vm_fault_t wp_huge_pmd(struct vm_fault *vmf)
 		}
 	}
 
+split:
 	/* COW or write-notify handled on pte level: split pmd. */
 	__split_huge_pmd(vma, vmf->pmd, vmf->address, false, NULL);