Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Introduce and use a single page frag cache for allocating small skb
     heads, clawing back the 10-20% performance regression in UDP flood
     test from previous fixes.

   - Run packets which already went thru HW coalescing thru SW GRO. This
     significantly improves TCP segment coalescing and simplifies
     deployments as different workloads benefit from HW or SW GRO.

   - Shrink the size of the base zero-copy send structure.

   - Move TCP init under a new slow / sleepable version of DO_ONCE().

  BPF:

   - Add BPF-specific, any-context-safe memory allocator.

   - Add helpers/kfuncs for PKCS#7 signature verification from BPF
     programs.

   - Define a new map type and related helpers for user space -> kernel
     communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).

   - Allow targeting BPF iterators to loop through resources of one
     task/thread.

   - Add ability to call selected destructive functions. Expose
     crash_kexec() to allow BPF to trigger a kernel dump. Use
     CAP_SYS_BOOT check on the loading process to judge permissions.

   - Enable BPF to collect custom hierarchical cgroup stats efficiently
     by integrating with the rstat framework.

   - Support struct arguments for trampoline based programs. Only
     structs with size <= 16B and x86 are supported.

   - Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
     sockets (instead of just TCP and UDP sockets).

   - Add a helper for accessing CLOCK_TAI for time sensitive network
     related programs.

   - Support accessing network tunnel metadata's flags.

   - Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.

   - Add support for writing to Netfilter's nf_conn:mark.

  Protocols:

   - WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
     (MLO) work (802.11be, WiFi 7).

   - vsock: improve support for SO_RCVLOWAT.

   - SMC: support SO_REUSEPORT.

   - Netlink: define and document how to use netlink in a "modern" way.
     Support reporting missing attributes via extended ACK.

   - IPSec: support collect metadata mode for xfrm interfaces.

   - TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
     packets.

   - TCP: introduce optional per-netns connection hash table to allow
     better isolation between namespaces (opt-in, at the cost of memory
     and cache pressure).

   - MPTCP: support TCP_FASTOPEN_CONNECT.

   - Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.

   - Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.

   - Open vSwitch:
      - Allow specifying ifindex of new interfaces.
      - Allow conntrack and metering in non-initial user namespace.

   - TLS: support the Korean ARIA-GCM crypto algorithm.

   - Remove DECnet support.

  Driver API:

   - Allow selecting the conduit interface used by each port in DSA
     switches, at runtime.

   - Ethernet Power Sourcing Equipment and Power Device support.

   - Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
     traffic class max frame size for time-based packet schedules.

   - Support PHY rate matching - adapting between differing host-side
     and link-side speeds.

   - Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.

   - Validate OF (device tree) nodes for DSA shared ports; make
     phylink-related properties mandatory on DSA and CPU ports.
     Enforcing more uniformity should allow transitioning to phylink.

   - Require that flash component name used during update matches one of
     the components for which version is reported by info_get().

   - Remove "weight" argument from driver-facing NAPI API as much as
     possible. It's one of those magic knobs which seemed like a good
     idea at the time but is too indirect to use in practice.

   - Support offload of TLS connections with 256 bit keys.

  New hardware / drivers:

   - Ethernet:
      - Microchip KSZ9896 6-port Gigabit Ethernet Switch
      - Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
      - Analog Devices ADIN1110 and ADIN2111 industrial single pair
        Ethernet (10BASE-T1L) MAC+PHY.
      - Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).

   - Ethernet SFPs / modules:
      - RollBall / Hilink / Turris 10G copper SFPs
      - HALNy GPON module

   - WiFi:
      - CYW43439 SDIO chipset (brcmfmac)
      - CYW89459 PCIe chipset (brcmfmac)
      - BCM4378 on Apple platforms (brcmfmac)

  Drivers:

   - CAN:
      - gs_usb: HW timestamp support

   - Ethernet PHYs:
      - lan8814: cable diagnostics

   - Ethernet NICs:
      - Intel (100G):
         - implement control of FCS/CRC stripping
         - port splitting via devlink
         - L2TPv3 filtering offload
      - nVidia/Mellanox:
         - tunnel offload for sub-functions
         - MACSec offload, w/ Extended packet number and replay window
           offload
         - significantly restructure, and optimize the AF_XDP support,
           align the behavior with other vendors
      - Huawei:
         - configuring DSCP map for traffic class selection
         - querying standard FEC statistics
         - querying SerDes lane number via ethtool
      - Marvell/Cavium:
         - egress priority flow control
         - MACSec offload
      - AMD/SolarFlare:
         - PTP over IPv6 and raw Ethernet
      - small / embedded:
         - ax88772: convert to phylink (to support SFP cages)
         - altera: tse: convert to phylink
         - ftgmac100: support fixed link
         - enetc: standard Ethtool counters
         - macb: ZynqMP SGMII dynamic configuration support
         - tsnep: support multi-queue and use page pool
         - lan743x: Rx IP & TCP checksum offload
         - igc: add xdp frags support to ndo_xdp_xmit

   - Ethernet high-speed switches:
      - Marvell (prestera):
         - support SPAN port features (traffic mirroring)
         - nexthop object offloading
      - Microchip (sparx5):
         - multicast forwarding offload
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - support RGMII cmode
      - NXP (felix):
         - standardized ethtool counters
      - Microchip (lan966x):
         - QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
         - traffic policing and mirroring
         - link aggregation / bonding offload
         - QUSGMII PHY mode support

   - Qualcomm 802.11ax WiFi (ath11k):
      - cold boot calibration support on WCN6750
      - support to connect to a non-transmit MBSSID AP profile
      - enable remain-on-channel support on WCN6750
      - Wake-on-WLAN support for WCN6750
      - support to provide transmit power from firmware via nl80211
      - support to get power save duration for each client
      - spectral scan support for 160 MHz

   - MediaTek WiFi (mt76):
      - WiFi-to-Ethernet bridging offload for MT7986 chips

   - RealTek WiFi (rtw89):
      - P2P support"

* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
  eth: pse: add missing static inlines
  once: rename _SLOW to _SLEEPABLE
  net: pse-pd: add regulator based PSE driver
  dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
  ethtool: add interface to interact with Ethernet Power Equipment
  net: mdiobus: search for PSE nodes by parsing PHY nodes.
  net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
  net: add framework to support Ethernet PSE and PDs devices
  dt-bindings: net: phy: add PoDL PSE property
  net: marvell: prestera: Propagate nh state from hw to kernel
  net: marvell: prestera: Add neighbour cache accounting
  net: marvell: prestera: add stub handler neighbour events
  net: marvell: prestera: Add heplers to interact with fib_notifier_info
  net: marvell: prestera: Add length macros for prestera_ip_addr
  net: marvell: prestera: add delayed wq and flush wq on deinit
  net: marvell: prestera: Add strict cleanup of fib arbiter
  net: marvell: prestera: Add cleanup of allocated fib_nodes
  net: marvell: prestera: Add router nexthops ABI
  eth: octeon: fix build after netif_napi_add() changes
  net/mlx5: E-Switch, Return EBUSY if can't get mode lock
  ...

1 files changed, 42 insertions, 0 deletions

diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c
index d11209367dd0..13d578ce2a09 100644
--- a/net/bpf/test_run.c
+++ b/net/bpf/test_run.c
@@ -606,6 +606,38 @@ noinline void bpf_kfunc_call_memb1_release(struct prog_test_member1 *p)
 	WARN_ON_ONCE(1);
 }
 
+static int *__bpf_kfunc_call_test_get_mem(struct prog_test_ref_kfunc *p, const int size)
+{
+	if (size > 2 * sizeof(int))
+		return NULL;
+
+	return (int *)p;
+}
+
+noinline int *bpf_kfunc_call_test_get_rdwr_mem(struct prog_test_ref_kfunc *p, const int rdwr_buf_size)
+{
+	return __bpf_kfunc_call_test_get_mem(p, rdwr_buf_size);
+}
+
+noinline int *bpf_kfunc_call_test_get_rdonly_mem(struct prog_test_ref_kfunc *p, const int rdonly_buf_size)
+{
+	return __bpf_kfunc_call_test_get_mem(p, rdonly_buf_size);
+}
+
+/* the next 2 ones can't be really used for testing expect to ensure
+ * that the verifier rejects the call.
+ * Acquire functions must return struct pointers, so these ones are
+ * failing.
+ */
+noinline int *bpf_kfunc_call_test_acq_rdonly_mem(struct prog_test_ref_kfunc *p, const int rdonly_buf_size)
+{
+	return __bpf_kfunc_call_test_get_mem(p, rdonly_buf_size);
+}
+
+noinline void bpf_kfunc_call_int_mem_release(int *p)
+{
+}
+
 noinline struct prog_test_ref_kfunc *
 bpf_kfunc_call_test_kptr_get(struct prog_test_ref_kfunc **pp, int a, int b)
 {
@@ -695,6 +727,10 @@ noinline void bpf_kfunc_call_test_ref(struct prog_test_ref_kfunc *p)
 {
 }
 
+noinline void bpf_kfunc_call_test_destructive(void)
+{
+}
+
 __diag_pop();
 
 ALLOW_ERROR_INJECTION(bpf_modify_return_test, ERRNO);
@@ -708,6 +744,10 @@ BTF_ID_FLAGS(func, bpf_kfunc_call_memb_acquire, KF_ACQUIRE | KF_RET_NULL)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_release, KF_RELEASE)
 BTF_ID_FLAGS(func, bpf_kfunc_call_memb_release, KF_RELEASE)
 BTF_ID_FLAGS(func, bpf_kfunc_call_memb1_release, KF_RELEASE)
+BTF_ID_FLAGS(func, bpf_kfunc_call_test_get_rdwr_mem, KF_RET_NULL)
+BTF_ID_FLAGS(func, bpf_kfunc_call_test_get_rdonly_mem, KF_RET_NULL)
+BTF_ID_FLAGS(func, bpf_kfunc_call_test_acq_rdonly_mem, KF_ACQUIRE | KF_RET_NULL)
+BTF_ID_FLAGS(func, bpf_kfunc_call_int_mem_release, KF_RELEASE)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_kptr_get, KF_ACQUIRE | KF_RET_NULL | KF_KPTR_GET)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_pass_ctx)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_pass1)
@@ -719,6 +759,7 @@ BTF_ID_FLAGS(func, bpf_kfunc_call_test_mem_len_pass1)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_mem_len_fail1)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_mem_len_fail2)
 BTF_ID_FLAGS(func, bpf_kfunc_call_test_ref, KF_TRUSTED_ARGS)
+BTF_ID_FLAGS(func, bpf_kfunc_call_test_destructive, KF_DESTRUCTIVE)
 BTF_SET8_END(test_sk_check_kfunc_ids)
 
 static void *bpf_test_init(const union bpf_attr *kattr, u32 user_size,
@@ -1629,6 +1670,7 @@ static int __init bpf_prog_test_run_init(void)
 
 	ret = register_btf_kfunc_id_set(BPF_PROG_TYPE_SCHED_CLS, &bpf_prog_test_kfunc_set);
 	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_TRACING, &bpf_prog_test_kfunc_set);
+	ret = ret ?: register_btf_kfunc_id_set(BPF_PROG_TYPE_SYSCALL, &bpf_prog_test_kfunc_set);
 	return ret ?: register_btf_id_dtor_kfuncs(bpf_prog_test_dtor_kfunc,
 						  ARRAY_SIZE(bpf_prog_test_dtor_kfunc),
 						  THIS_MODULE);