summaryrefslogtreecommitdiff
path: root/net/ipv4/ip_vti.c
diff options
context:
space:
mode:
authorChristophe Gouault <christophe.gouault@6wind.com>2013-10-08 17:21:22 +0200
committerDavid S. Miller <davem@davemloft.net>2013-10-11 14:52:17 -0400
commit7263a5187f9e9de45fcb51349cf0e031142c19a1 (patch)
tree033a66fb159da0ec909cfb91fe2187983876fd40 /net/ipv4/ip_vti.c
parentf144febd93d5ee534fdf23505ab091b2b9088edc (diff)
vti: get rid of nf mark rule in prerouting
This patch fixes and improves the use of vti interfaces (while lightly changing the way of configuring them). Currently: - it is necessary to identify and mark inbound IPsec packets destined to each vti interface, via netfilter rules in the mangle table at prerouting hook. - the vti module cannot retrieve the right tunnel in input since commit b9959fd3: vti tunnels all have an i_key, but the tunnel lookup is done with flag TUNNEL_NO_KEY, so there no chance to retrieve them. - the i_key is used by the outbound processing as a mark to lookup for the right SP and SA bundle. This patch uses the o_key to store the vti mark (instead of i_key) and enables: - to avoid the need for previously marking the inbound skbuffs via a netfilter rule. - to properly retrieve the right tunnel in input, only based on the IPsec packet outer addresses. - to properly perform an inbound policy check (using the tunnel o_key as a mark). - to properly perform an outbound SPD and SAD lookup (using the tunnel o_key as a mark). - to keep the current mark of the skbuff. The skbuff mark is neither used nor changed by the vti interface. Only the vti interface o_key is used. SAs have a wildcard mark. SPs have a mark equal to the vti interface o_key. The vti interface must be created as follows (i_key = 0, o_key = mark): ip link add vti1 mode vti local 1.1.1.1 remote 2.2.2.2 okey 1 The SPs attached to vti1 must be created as follows (mark = vti1 o_key): ip xfrm policy add dir out mark 1 tmpl src 1.1.1.1 dst 2.2.2.2 \ proto esp mode tunnel ip xfrm policy add dir in mark 1 tmpl src 2.2.2.2 dst 1.1.1.1 \ proto esp mode tunnel The SAs are created with the default wildcard mark. There is no distinction between global vs. vti SAs. Just their addresses will possibly link them to a vti interface: ip xfrm state add src 1.1.1.1 dst 2.2.2.2 proto esp spi 1000 mode tunnel \ enc "cbc(aes)" "azertyuiopqsdfgh" ip xfrm state add src 2.2.2.2 dst 1.1.1.1 proto esp spi 2000 mode tunnel \ enc "cbc(aes)" "sqbdhgqsdjqjsdfh" To avoid matching "global" (not vti) SPs in vti interfaces, global SPs should no use the default wildcard mark, but explicitly match mark 0. To avoid a double SPD lookup in input and output (in global and vti SPDs), the NOPOLICY and NOXFRM options should be set on the vti interfaces: echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_policy echo 1 > /proc/sys/net/ipv4/conf/vti1/disable_xfrm The outgoing traffic is steered to vti1 by a route via the vti interface: ip route add 192.168.0.0/16 dev vti1 The incoming IPsec traffic is steered to vti1 because its outer addresses match the vti1 tunnel configuration. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'net/ipv4/ip_vti.c')
-rw-r--r--net/ipv4/ip_vti.c14
1 files changed, 11 insertions, 3 deletions
diff --git a/net/ipv4/ip_vti.c b/net/ipv4/ip_vti.c
index e805e7b3030e..6e87f853d033 100644
--- a/net/ipv4/ip_vti.c
+++ b/net/ipv4/ip_vti.c
@@ -125,8 +125,17 @@ static int vti_rcv(struct sk_buff *skb)
iph->saddr, iph->daddr, 0);
if (tunnel != NULL) {
struct pcpu_tstats *tstats;
+ u32 oldmark = skb->mark;
+ int ret;
- if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb))
+
+ /* temporarily mark the skb with the tunnel o_key, to
+ * only match policies with this mark.
+ */
+ skb->mark = be32_to_cpu(tunnel->parms.o_key);
+ ret = xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb);
+ skb->mark = oldmark;
+ if (!ret)
return -1;
tstats = this_cpu_ptr(tunnel->dev->tstats);
@@ -135,7 +144,6 @@ static int vti_rcv(struct sk_buff *skb)
tstats->rx_bytes += skb->len;
u64_stats_update_end(&tstats->syncp);
- skb->mark = 0;
secpath_reset(skb);
skb->dev = tunnel->dev;
return 1;
@@ -167,7 +175,7 @@ static netdev_tx_t vti_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
memset(&fl4, 0, sizeof(fl4));
flowi4_init_output(&fl4, tunnel->parms.link,
- be32_to_cpu(tunnel->parms.i_key), RT_TOS(tos),
+ be32_to_cpu(tunnel->parms.o_key), RT_TOS(tos),
RT_SCOPE_UNIVERSE,
IPPROTO_IPIP, 0,
dst, tiph->saddr, 0, 0);