summaryrefslogtreecommitdiff
path: root/net/wireless/mesh.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes.berg@intel.com>2012-05-16 23:50:20 +0200
committerJohn W. Linville <linville@tuxdriver.com>2012-06-05 15:32:18 -0400
commitcc1d2806bf06ab92268343d26eb3d8d8f00f8bc9 (patch)
treeb14ffa920d616470715e715df49f990bfdcf12ae /net/wireless/mesh.c
parent685d12a1929f274bd91497e33b4255fe164ac8ec (diff)
cfg80211: provide channel to join_mesh function
Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'net/wireless/mesh.c')
-rw-r--r--net/wireless/mesh.c91
1 files changed, 89 insertions, 2 deletions
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
index 2749cb86b462..2e3b700eba32 100644
--- a/net/wireless/mesh.c
+++ b/net/wireless/mesh.c
@@ -65,6 +65,9 @@ const struct mesh_config default_mesh_config = {
};
const struct mesh_setup default_mesh_setup = {
+ /* cfg80211_join_mesh() will pick a channel if needed */
+ .channel = NULL,
+ .channel_type = NL80211_CHAN_NO_HT,
.sync_method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
@@ -75,7 +78,7 @@ const struct mesh_setup default_mesh_setup = {
int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- const struct mesh_setup *setup,
+ struct mesh_setup *setup,
const struct mesh_config *conf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -101,6 +104,51 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
if (!rdev->ops->join_mesh)
return -EOPNOTSUPP;
+ if (!setup->channel) {
+ /* if no channel explicitly given, use preset channel */
+ setup->channel = wdev->preset_chan;
+ setup->channel_type = wdev->preset_chantype;
+ }
+
+ if (!setup->channel) {
+ /* if we don't have that either, use the first usable channel */
+ enum ieee80211_band band;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *chan;
+ int i;
+
+ sband = rdev->wiphy.bands[band];
+ if (!sband)
+ continue;
+
+ for (i = 0; i < sband->n_channels; i++) {
+ chan = &sband->channels[i];
+ if (chan->flags & (IEEE80211_CHAN_NO_IBSS |
+ IEEE80211_CHAN_PASSIVE_SCAN |
+ IEEE80211_CHAN_DISABLED |
+ IEEE80211_CHAN_RADAR))
+ continue;
+ setup->channel = chan;
+ break;
+ }
+
+ if (setup->channel)
+ break;
+ }
+
+ /* no usable channel ... */
+ if (!setup->channel)
+ return -EINVAL;
+
+ setup->channel_type = NL80211_CHAN_NO_HT;
+ }
+
+ if (!cfg80211_can_beacon_sec_chan(&rdev->wiphy, setup->channel,
+ setup->channel_type))
+ return -EINVAL;
+
err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
if (!err) {
memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
@@ -112,7 +160,7 @@ int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
struct net_device *dev,
- const struct mesh_setup *setup,
+ struct mesh_setup *setup,
const struct mesh_config *conf)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -125,6 +173,45 @@ int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
return err;
}
+int cfg80211_set_mesh_freq(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, int freq,
+ enum nl80211_channel_type channel_type)
+{
+ struct ieee80211_channel *channel;
+
+ /*
+ * Workaround for libertas (only!), it puts the interface
+ * into mesh mode but doesn't implement join_mesh. Instead,
+ * it is configured via sysfs and then joins the mesh when
+ * you set the channel. Note that the libertas mesh isn't
+ * compatible with 802.11 mesh.
+ */
+ if (!rdev->ops->join_mesh) {
+ int err;
+
+ if (!netif_running(wdev->netdev))
+ return -ENETDOWN;
+ wdev_lock(wdev);
+ err = cfg80211_set_freq(rdev, wdev, freq, channel_type);
+ wdev_unlock(wdev);
+
+ return err;
+ }
+
+ if (wdev->mesh_id_len)
+ return -EBUSY;
+
+ channel = rdev_freq_to_chan(rdev, freq, channel_type);
+ if (!channel || !cfg80211_can_beacon_sec_chan(&rdev->wiphy,
+ channel,
+ channel_type)) {
+ return -EINVAL;
+ }
+ wdev->preset_chan = channel;
+ wdev->preset_chantype = channel_type;
+ return 0;
+}
+
void cfg80211_notify_new_peer_candidate(struct net_device *dev,
const u8 *macaddr, const u8* ie, u8 ie_len, gfp_t gfp)
{