ASoC: codecs: tlv*: rename to snd_soc_component_read()

We need to use snd_soc_component_read()
instead of     snd_soc_component_read32()

This patch renames _read32() to _read()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k1074mds.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 8 insertions, 8 deletions

diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index d087f3b20b1d..8682daec016e 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -82,7 +82,7 @@ static int aic32x4_get_mfp1_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	u8 val;
 
-	val = snd_soc_component_read32(component, AIC32X4_DINCTL);
+	val = snd_soc_component_read(component, AIC32X4_DINCTL);
 
 	ucontrol->value.integer.value[0] = (val & 0x01);
 
@@ -96,7 +96,7 @@ static int aic32x4_set_mfp2_gpio(struct snd_kcontrol *kcontrol,
 	u8 val;
 	u8 gpio_check;
 
-	val = snd_soc_component_read32(component, AIC32X4_DOUTCTL);
+	val = snd_soc_component_read(component, AIC32X4_DOUTCTL);
 	gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
 	if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
 		printk(KERN_ERR "%s: MFP2 is not configure as a GPIO output\n",
@@ -123,7 +123,7 @@ static int aic32x4_get_mfp3_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	u8 val;
 
-	val = snd_soc_component_read32(component, AIC32X4_SCLKCTL);
+	val = snd_soc_component_read(component, AIC32X4_SCLKCTL);
 
 	ucontrol->value.integer.value[0] = (val & 0x01);
 
@@ -137,7 +137,7 @@ static int aic32x4_set_mfp4_gpio(struct snd_kcontrol *kcontrol,
 	u8 val;
 	u8 gpio_check;
 
-	val = snd_soc_component_read32(component, AIC32X4_MISOCTL);
+	val = snd_soc_component_read(component, AIC32X4_MISOCTL);
 	gpio_check = (val & AIC32X4_MFP_GPIO_ENABLED);
 	if (gpio_check != AIC32X4_MFP_GPIO_ENABLED) {
 		printk(KERN_ERR "%s: MFP4 is not configure as a GPIO output\n",
@@ -164,7 +164,7 @@ static int aic32x4_get_mfp5_gpio(struct snd_kcontrol *kcontrol,
 	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
 	u8 val;
 
-	val = snd_soc_component_read32(component, AIC32X4_GPIOCTL);
+	val = snd_soc_component_read(component, AIC32X4_GPIOCTL);
 	ucontrol->value.integer.value[0] = ((val & 0x2) >> 1);
 
 	return 0;
@@ -177,7 +177,7 @@ static int aic32x4_set_mfp5_gpio(struct snd_kcontrol *kcontrol,
 	u8 val;
 	u8 gpio_check;
 
-	val = snd_soc_component_read32(component, AIC32X4_GPIOCTL);
+	val = snd_soc_component_read(component, AIC32X4_GPIOCTL);
 	gpio_check = (val & AIC32X4_MFP5_GPIO_OUTPUT);
 	if (gpio_check != AIC32X4_MFP5_GPIO_OUTPUT) {
 		printk(KERN_ERR "%s: MFP5 is not configure as a GPIO output\n",
@@ -978,7 +978,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
 			AIC32X4_LDOCTLEN : 0;
 	snd_soc_component_write(component, AIC32X4_LDOCTL, tmp_reg);
 
-	tmp_reg = snd_soc_component_read32(component, AIC32X4_CMMODE);
+	tmp_reg = snd_soc_component_read(component, AIC32X4_CMMODE);
 	if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36)
 		tmp_reg |= AIC32X4_LDOIN_18_36;
 	if (aic32x4->power_cfg & AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED)
@@ -1004,7 +1004,7 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
 	 * and down for the first capture to work properly. It seems related to
 	 * a HW BUG or some kind of behavior not documented in the datasheet.
 	 */
-	tmp_reg = snd_soc_component_read32(component, AIC32X4_ADCSETUP);
+	tmp_reg = snd_soc_component_read(component, AIC32X4_ADCSETUP);
 	snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg |
 				AIC32X4_LADC_EN | AIC32X4_RADC_EN);
 	snd_soc_component_write(component, AIC32X4_ADCSETUP, tmp_reg);