diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-14 18:01:46 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-11-14 18:01:46 -0800 |
| commit | 4e4510fec4af08ead21f6934c1410af1f19a8cad (patch) | |
| tree | 2bafab4f7cc2cdf2983186b24140f6303d4dfc8c /sound/soc/intel | |
| parent | 4008e6a9bcee2f3b61bb11951de0fb0ed764cb91 (diff) | |
| parent | 7087cb8fad5e19113d82f47f351fc6b338948d5f (diff) | |
Merge tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are no big surprising changes in this cycle, yet not too boring,
either. The biggest change from diffstat POV is the removal of the
legacy OSS driver codes that have been already disabled for a long
time. This will bring a few trivial merge conflicts.
As new features in ASoC side, there are two things: a new AC97 bus
implementation and AMD Stony platform support. Both include the
relevant changes shared with other subsystems, e.g. AC97 MFD changes
and DRM AMD changes.
Some other highlighted topics are:
- A bunch of USB-audio drivers got the hardening against the
malicious device accesses with a new helper code for endpoint
sanity check
- Lots of cleanups for ASoC Intel platform code, including support
for their open source audio firmware
- Continued ASoC core componentization works
- Support for scaling MCLK with sample rate in ASoC simple-card
- Stabler PCM hot-unplug capability, especially for ASoC usages"
* tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits)
Documentation: sound: hd-audio: notes.rst
ASoC: bcm2835: Support left/right justified and DSP modes
ASoC: bcm2835: Enforce full symmetry
ASoC: bcm2835: Support additional samplerates up to 384kHz
ASoC: bcm2835: Add support for TDM modes
ASoC: add mclk-fs support to audio graph card
ASoC: add mclk-fs to audio graph card binding
ASoC: rt5514: work around link error
ASoC: rt5514: mark PM functions as __maybe_unused
ASoC: rt5663: Check the JD status in the button pushing
ASoC: amd: Modified DMA transfer Mechanism for Playback
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2
ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+
ASoC: da7213: add support for DSP modes
ASoC: sun8i-codec: Add a comment on the LRCK inversion
ASoC: sun8i-codec: Set the BCLK divider
ASoC: rt5663: Delay and retry reading rt5663 ID register
ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds
ASoC: cs42l56: Fix reset GPIO name in example DT binding
ASoC: rt5514-spi: check irq status to schedule data copy in resume function
...
Diffstat (limited to 'sound/soc/intel')
37 files changed, 1566 insertions, 1295 deletions
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index b3c7f554ec30..bb8be10b8437 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -1,19 +1,3 @@ -config SND_MFLD_MACHINE - tristate "SOC Machine Audio driver for Intel Medfield MID platform" - depends on INTEL_SCU_IPC - select SND_SOC_SN95031 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_PCI - help - This adds support for ASoC machine driver for Intel(R) MID Medfield platform - used as alsa device in audio substem in Intel(R) MID devices - Say Y if you have such a device. - If unsure select "N". - -config SND_SST_ATOM_HIFI2_PLATFORM - tristate - select SND_SOC_COMPRESS - config SND_SST_IPC tristate @@ -27,10 +11,12 @@ config SND_SST_IPC_ACPI select SND_SOC_INTEL_SST select IOSF_MBI +config SND_SOC_INTEL_COMMON + tristate + config SND_SOC_INTEL_SST tristate select SND_SOC_INTEL_SST_ACPI if ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI config SND_SOC_INTEL_SST_FIRMWARE tristate @@ -39,280 +25,42 @@ config SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_SST_ACPI tristate -config SND_SOC_INTEL_SST_MATCH +config SND_SOC_ACPI_INTEL_MATCH tristate + select SND_SOC_ACPI if ACPI + +config SND_SOC_INTEL_SST_TOPLEVEL + tristate "Intel ASoC SST drivers" + depends on X86 || COMPILE_TEST + select SND_SOC_INTEL_MACH + select SND_SOC_INTEL_COMMON config SND_SOC_INTEL_HASWELL - tristate + tristate "Intel ASoC SST driver for Haswell/Broadwell" + depends on SND_SOC_INTEL_SST_TOPLEVEL && SND_DMA_SGBUF + depends on DMADEVICES select SND_SOC_INTEL_SST select SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_BAYTRAIL - tristate - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE - -config SND_SOC_INTEL_HASWELL_MACH - tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint" - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM - depends on DMADEVICES - select SND_SOC_INTEL_HASWELL - select SND_SOC_RT5640 - help - This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell - Ultrabook platforms. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH - tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode" - depends on X86 && ACPI && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_DA7219 - select SND_SOC_MAX98357A - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - select SND_HDA_DSP_LOADER - help - This adds support for ASoC machine driver for Broxton-P platforms - with DA7219 + MAX98357A I2S audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BXT_RT298_MACH - tristate "ASoC Audio driver for Broxton with RT298 I2S mode" - depends on X86 && ACPI && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT298 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - select SND_HDA_DSP_LOADER - help - This adds support for ASoC machine driver for Broxton platforms - with RT286 I2S audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BYT_RT5640_MACH - tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" - depends on X86_INTEL_LPSS && I2C + tristate "Intel ASoC SST driver for Baytrail (legacy)" + depends on SND_SOC_INTEL_SST_TOPLEVEL depends on DMADEVICES - depends on SND_SST_IPC_ACPI = n - select SND_SOC_INTEL_BAYTRAIL - select SND_SOC_RT5640 - help - This adds audio driver for Intel Baytrail platform based boards - with the RT5640 audio codec. This driver is deprecated, use - SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. - -config SND_SOC_INTEL_BYT_MAX98090_MACH - tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" - depends on X86_INTEL_LPSS && I2C - depends on DMADEVICES - depends on SND_SST_IPC_ACPI = n - select SND_SOC_INTEL_BAYTRAIL - select SND_SOC_MAX98090 - help - This adds audio driver for Intel Baytrail platform based boards - with the MAX98090 audio codec. - -config SND_SOC_INTEL_BDW_RT5677_MACH - tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec" - depends on X86_INTEL_LPSS && GPIOLIB && I2C - depends on DMADEVICES - select SND_SOC_INTEL_HASWELL - select SND_SOC_RT5677 - help - This adds support for Intel Broadwell platform based boards with - the RT5677 audio codec. - -config SND_SOC_INTEL_BROADWELL_MACH - tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" - depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM - depends on DMADEVICES - select SND_SOC_INTEL_HASWELL - select SND_SOC_RT286 - help - This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell - Ultrabook platforms. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BYTCR_RT5640_MACH - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec" - depends on X86 && I2C && ACPI - select SND_SOC_RT5640 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR - platforms with RT5640 audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_BYTCR_RT5651_MACH - tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec" - depends on X86 && I2C && ACPI - select SND_SOC_RT5651 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR - platforms with RT5651 audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_CHT_BSW_RT5672_MACH - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_RT5670 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with RT5672 audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_CHT_BSW_RT5645_MACH - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_RT5645 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with RT5645/5650 audio codec. - If unsure select "N". - -config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH - tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_MAX98090 - select SND_SOC_TS3A227E - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with MAX98090 audio codec it also can support TI jack chip as aux device. - If unsure select "N". - -config SND_SOC_INTEL_BYT_CHT_DA7213_MACH - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_DA7213 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail - platforms with DA7212/7213 audio codec. - If unsure select "N". - -config SND_SOC_INTEL_BYT_CHT_ES8316_MACH - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SOC_ES8316 - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for Intel(R) Baytrail & - Cherrytrail platforms with ES8316 audio codec. - If unsure select "N". - -config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH - tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" - depends on X86_INTEL_LPSS && I2C && ACPI - select SND_SST_ATOM_HIFI2_PLATFORM - select SND_SST_IPC_ACPI - select SND_SOC_INTEL_SST_MATCH if ACPI - help - This adds support for ASoC machine driver for the MinnowBoard Max or - Up boards and provides access to I2S signals on the Low-Speed - connector - If unsure select "N". - -config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH - tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode" - depends on X86_INTEL_LPSS && I2C select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT5663 - select SND_SOC_MAX98927 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for RT5663 + MAX98927. - Say Y if you have such a device. - If unsure select "N". + select SND_SOC_INTEL_SST_FIRMWARE -config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH - tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode" - depends on X86_INTEL_LPSS && I2C && SPI - select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT5663 - select SND_SOC_RT5514 - select SND_SOC_RT5514_SPI - select SND_SOC_MAX98927 - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for RT5663 + RT5514 + MAX98927. - Say Y if you have such a device. - If unsure select "N". +config SND_SST_ATOM_HIFI2_PLATFORM + tristate "Intel ASoC SST driver for HiFi2 platforms (*field, *trail)" + depends on SND_SOC_INTEL_SST_TOPLEVEL && X86 + select SND_SOC_COMPRESS config SND_SOC_INTEL_SKYLAKE - tristate + tristate "Intel ASoC SST driver for SKL/BXT/KBL/GLK/CNL" + depends on SND_SOC_INTEL_SST_TOPLEVEL && PCI && ACPI select SND_HDA_EXT_CORE select SND_HDA_DSP_LOADER select SND_SOC_TOPOLOGY select SND_SOC_INTEL_SST -config SND_SOC_INTEL_SKL_RT286_MACH - tristate "ASoC Audio driver for SKL with RT286 I2S mode" - depends on X86 && ACPI && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_RT286 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC machine driver for Skylake platforms - with RT286 I2S audio codec. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH - tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode" - depends on X86_INTEL_LPSS && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_NAU8825 - select SND_SOC_SSM4567 - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for NAU88L25 + SSM4567. - Say Y if you have such a device. - If unsure select "N". - -config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH - tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode" - depends on X86_INTEL_LPSS && I2C - select SND_SOC_INTEL_SKYLAKE - select SND_SOC_NAU8825 - select SND_SOC_MAX98357A - select SND_SOC_DMIC - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for NAU88L25 + MAX98357A. - Say Y if you have such a device. - If unsure select "N". +# ASoC codec drivers +source "sound/soc/intel/boards/Kconfig" diff --git a/sound/soc/intel/Makefile b/sound/soc/intel/Makefile index 62f37ffffdf0..b973d457e834 100644 --- a/sound/soc/intel/Makefile +++ b/sound/soc/intel/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 # Core support -obj-$(CONFIG_SND_SOC_INTEL_SST) += common/ +obj-$(CONFIG_SND_SOC_INTEL_COMMON) += common/ # Platform Support obj-$(CONFIG_SND_SOC_INTEL_HASWELL) += haswell/ diff --git a/sound/soc/intel/atom/sst-mfld-platform-compress.c b/sound/soc/intel/atom/sst-mfld-platform-compress.c index 1bead81bb510..1dbcab5a6ff0 100644 --- a/sound/soc/intel/atom/sst-mfld-platform-compress.c +++ b/sound/soc/intel/atom/sst-mfld-platform-compress.c @@ -259,7 +259,7 @@ static int sst_platform_compr_set_metadata(struct snd_compr_stream *cstream, return stream->compr_ops->set_metadata(sst->dev, stream->id, metadata); } -struct snd_compr_ops sst_platform_compr_ops = { +const struct snd_compr_ops sst_platform_compr_ops = { .open = sst_platform_compr_open, .free = sst_platform_compr_free, diff --git a/sound/soc/intel/atom/sst-mfld-platform.h b/sound/soc/intel/atom/sst-mfld-platform.h index cb32cc7e5ec1..31a58c25472c 100644 --- a/sound/soc/intel/atom/sst-mfld-platform.h +++ b/sound/soc/intel/atom/sst-mfld-platform.h @@ -25,7 +25,7 @@ #include "sst-atom-controls.h" extern struct sst_device *sst; -extern struct snd_compr_ops sst_platform_compr_ops; +extern const struct snd_compr_ops sst_platform_compr_ops; #define SST_MONO 1 #define SST_STEREO 2 diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 0e928d54305d..32d6e02e2104 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/miscdevice.h> #include <linux/platform_device.h> #include <linux/firmware.h> #include <linux/pm_runtime.h> @@ -41,9 +40,10 @@ #include <acpi/acpi_bus.h> #include <asm/cpu_device_id.h> #include <asm/iosf_mbi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> #include "../sst-mfld-platform.h" #include "../../common/sst-dsp.h" -#include "../../common/sst-acpi.h" #include "sst.h" /* LPE viewpoint addresses */ @@ -239,19 +239,26 @@ static int sst_platform_get_resources(struct intel_sst_drv *ctx) return 0; } +static int is_byt(void) +{ + bool status = false; + static const struct x86_cpu_id cpu_ids[] = { + { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ + {} + }; + if (x86_match_cpu(cpu_ids)) + status = true; + return status; +} static int is_byt_cr(struct device *dev, bool *bytcr) { int status = 0; if (IS_ENABLED(CONFIG_IOSF_MBI)) { - static const struct x86_cpu_id cpu_ids[] = { - { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ - {} - }; u32 bios_status; - if (!x86_match_cpu(cpu_ids) || !iosf_mbi_available()) { + if (!is_byt() || !iosf_mbi_available()) { /* bail silently */ return status; } @@ -285,7 +292,7 @@ static int sst_acpi_probe(struct platform_device *pdev) int ret = 0; struct intel_sst_drv *ctx; const struct acpi_device_id *id; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; struct platform_device *mdev; struct platform_device *plat_dev; struct sst_platform_info *pdata; @@ -297,13 +304,17 @@ static int sst_acpi_probe(struct platform_device *pdev) return -ENODEV; dev_dbg(dev, "for %s\n", id->id); - mach = (struct sst_acpi_mach *)id->driver_data; - mach = sst_acpi_find_machine(mach); + mach = (struct snd_soc_acpi_mach *)id->driver_data; + mach = snd_soc_acpi_find_machine(mach); if (mach == NULL) { dev_err(dev, "No matching machine driver found\n"); return -ENODEV; } + if (is_byt()) + mach->pdata = &byt_rvp_platform_data; + else + mach->pdata = &chv_platform_data; pdata = mach->pdata; ret = kstrtouint(id->id, 16, &dev_id); @@ -381,286 +392,9 @@ static int sst_acpi_remove(struct platform_device *pdev) return 0; } -static unsigned long cht_machine_id; - -#define CHT_SURFACE_MACH 1 -#define BYT_THINKPAD_10 2 - -static int cht_surface_quirk_cb(const struct dmi_system_id *id) -{ - cht_machine_id = CHT_SURFACE_MACH; - return 1; -} - -static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id) -{ - cht_machine_id = BYT_THINKPAD_10; - return 1; -} - - -static const struct dmi_system_id byt_table[] = { - { - .callback = byt_thinkpad10_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), - }, - }, - { - .callback = byt_thinkpad10_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), - }, - }, - { - .callback = byt_thinkpad10_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), - }, - }, - { } -}; - -static const struct dmi_system_id cht_table[] = { - { - .callback = cht_surface_quirk_cb, - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), - }, - }, - { } -}; - - -static struct sst_acpi_mach cht_surface_mach = { - .id = "10EC5640", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data, -}; - -static struct sst_acpi_mach byt_thinkpad_10 = { - .id = "10EC5640", - .drv_name = "cht-bsw-rt5672", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "cht-bsw", - .pdata = &byt_rvp_platform_data, -}; - -static struct sst_acpi_mach *cht_quirk(void *arg) -{ - struct sst_acpi_mach *mach = arg; - - dmi_check_system(cht_table); - - if (cht_machine_id == CHT_SURFACE_MACH) - return &cht_surface_mach; - else - return mach; -} - -static struct sst_acpi_mach *byt_quirk(void *arg) -{ - struct sst_acpi_mach *mach = arg; - - dmi_check_system(byt_table); - - if (cht_machine_id == BYT_THINKPAD_10) - return &byt_thinkpad_10; - else - return mach; -} - - -static struct sst_acpi_mach sst_acpi_bytcr[] = { - { - .id = "10EC5640", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5640", - .machine_quirk = byt_quirk, - .pdata = &byt_rvp_platform_data, - }, - { - .id = "10EC5642", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5640", - .pdata = &byt_rvp_platform_data - }, - { - .id = "INTCCFFD", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5640", - .pdata = &byt_rvp_platform_data - }, - { - .id = "10EC5651", - .drv_name = "bytcr_rt5651", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcr_rt5651", - .pdata = &byt_rvp_platform_data - }, - { - .id = "DLGS7212", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcht_da7213", - .pdata = &byt_rvp_platform_data - }, - { - .id = "DLGS7213", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcht_da7213", - .pdata = &byt_rvp_platform_data - }, - /* some Baytrail platforms rely on RT5645, use CHT machine driver */ - { - .id = "10EC5645", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "cht-bsw", - .pdata = &byt_rvp_platform_data - }, - { - .id = "10EC5648", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "cht-bsw", - .pdata = &byt_rvp_platform_data - }, -#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) - /* - * This is always last in the table so that it is selected only when - * enabled explicitly and there is no codec-related information in SSDT - */ - { - .id = "80860F28", - .drv_name = "bytcht_nocodec", - .fw_filename = "intel/fw_sst_0f28.bin", - .board = "bytcht_nocodec", - .pdata = &byt_rvp_platform_data - }, -#endif - {}, -}; - -/* Cherryview-based platforms: CherryTrail and Braswell */ -static struct sst_acpi_mach sst_acpi_chv[] = { - { - .id = "10EC5670", - .drv_name = "cht-bsw-rt5672", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC5672", - .drv_name = "cht-bsw-rt5672", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC5645", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC5650", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "10EC3270", - .drv_name = "cht-bsw-rt5645", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - - { - .id = "193C9890", - .drv_name = "cht-bsw-max98090", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "cht-bsw", - .pdata = &chv_platform_data - }, - { - .id = "DLGS7212", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_da7213", - .pdata = &chv_platform_data - }, - { - .id = "DLGS7213", - .drv_name = "bytcht_da7213", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_da7213", - .pdata = &chv_platform_data - }, - { - .id = "ESSX8316", - .drv_name = "bytcht_es8316", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_es8316", - .pdata = &chv_platform_data - }, - /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ - { - .id = "10EC5640", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcr_rt5640", - .machine_quirk = cht_quirk, - .pdata = &chv_platform_data - }, - { - .id = "10EC3276", - .drv_name = "bytcr_rt5640", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcr_rt5640", - .pdata = &chv_platform_data - }, - /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ - { - .id = "10EC5651", - .drv_name = "bytcr_rt5651", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcr_rt5651", - .pdata = &chv_platform_data - }, -#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) - /* - * This is always last in the table so that it is selected only when - * enabled explicitly and there is no codec-related information in SSDT - */ - { - .id = "808622A8", - .drv_name = "bytcht_nocodec", - .fw_filename = "intel/fw_sst_22a8.bin", - .board = "bytcht_nocodec", - .pdata = &chv_platform_data - }, -#endif - {}, -}; - static const struct acpi_device_id sst_acpi_ids[] = { - { "80860F28", (unsigned long)&sst_acpi_bytcr}, - { "808622A8", (unsigned long) &sst_acpi_chv}, + { "80860F28", (unsigned long)&snd_soc_acpi_intel_baytrail_machines}, + { "808622A8", (unsigned long)&snd_soc_acpi_intel_cherrytrail_machines}, { }, }; diff --git a/sound/soc/intel/atom/sst/sst_loader.c b/sound/soc/intel/atom/sst/sst_loader.c index 33917146d9c4..a686eef2cf7f 100644 --- a/sound/soc/intel/atom/sst/sst_loader.c +++ b/sound/soc/intel/atom/sst/sst_loader.c @@ -415,7 +415,6 @@ int sst_load_fw(struct intel_sst_drv *sst_drv_ctx) return ret_val; } - BUG_ON(!sst_drv_ctx->fw_in_mem); block = sst_create_block(sst_drv_ctx, 0, FW_DWNL_ID); if (block == NULL) return -ENOMEM; diff --git a/sound/soc/intel/atom/sst/sst_stream.c b/sound/soc/intel/atom/sst/sst_stream.c index 83d8dda15233..65e257b17a7e 100644 --- a/sound/soc/intel/atom/sst/sst_stream.c +++ b/sound/soc/intel/atom/sst/sst_stream.c @@ -45,7 +45,6 @@ int sst_alloc_stream_mrfld(struct intel_sst_drv *sst_drv_ctx, void *params) void *data = NULL; dev_dbg(sst_drv_ctx->dev, "Enter\n"); - BUG_ON(!params); str_params = (struct snd_sst_params *)params; memset(&alloc_param, 0, sizeof(alloc_param)); diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig new file mode 100644 index 000000000000..6f754708a48c --- /dev/null +++ b/sound/soc/intel/boards/Kconfig @@ -0,0 +1,265 @@ +config SND_SOC_INTEL_MACH + tristate "Intel Audio machine drivers" + depends on SND_SOC_INTEL_SST_TOPLEVEL + select SND_SOC_ACPI_INTEL_MATCH if ACPI + +if SND_SOC_INTEL_MACH + +config SND_MFLD_MACHINE + tristate "SOC Machine Audio driver for Intel Medfield MID platform" + depends on INTEL_SCU_IPC + select SND_SOC_SN95031 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_PCI + help + This adds support for ASoC machine driver for Intel(R) MID Medfield platform + used as alsa device in audio substem in Intel(R) MID devices + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_HASWELL_MACH + tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM + depends on SND_SOC_INTEL_HASWELL + select SND_SOC_RT5640 + help + This adds support for the Lynxpoint Audio DSP on Intel(R) Haswell + Ultrabook platforms. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BDW_RT5677_MACH + tristate "ASoC Audio driver for Intel Broadwell with RT5677 codec" + depends on X86_INTEL_LPSS && GPIOLIB && I2C + depends on SND_SOC_INTEL_HASWELL + select SND_SOC_RT5677 + help + This adds support for Intel Broadwell platform based boards with + the RT5677 audio codec. + +config SND_SOC_INTEL_BROADWELL_MACH + tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM + depends on SND_SOC_INTEL_HASWELL + select SND_SOC_RT286 + help + This adds support for the Wilcatpoint Audio DSP on Intel(R) Broadwell + Ultrabook platforms. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BYT_MAX98090_MACH + tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" + depends on X86_INTEL_LPSS && I2C + depends on SND_SST_IPC_ACPI = n + depends on SND_SOC_INTEL_BAYTRAIL + select SND_SOC_MAX98090 + help + This adds audio driver for Intel Baytrail platform based boards + with the MAX98090 audio codec. + +config SND_SOC_INTEL_BYT_RT5640_MACH + tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" + depends on X86_INTEL_LPSS && I2C + depends on SND_SST_IPC_ACPI = n + depends on SND_SOC_INTEL_BAYTRAIL + select SND_SOC_RT5640 + help + This adds audio driver for Intel Baytrail platform based boards + with the RT5640 audio codec. This driver is deprecated, use + SND_SOC_INTEL_BYTCR_RT5640_MACH instead for better functionality. + +config SND_SOC_INTEL_BYTCR_RT5640_MACH + tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5640 codec" + depends on X86 && I2C && ACPI + select SND_SOC_RT5640 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5640 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BYTCR_RT5651_MACH + tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec" + depends on X86 && I2C && ACPI + select SND_SOC_RT5651 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR + platforms with RT5651 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5672_MACH + tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5670 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5672 audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_RT5645_MACH + tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5645/5650 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_RT5645 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5645/5650 audio codec. + If unsure select "N". + +config SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH + tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with MAX98090 & TI codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_MAX98090 + select SND_SOC_TS3A227E + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with MAX98090 audio codec it also can support TI jack chip as aux device. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_DA7213_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with DA7212/7213 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_DA7213 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & CherryTrail + platforms with DA7212/7213 audio codec. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_ES8316_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail with ES8316 codec" + depends on X86_INTEL_LPSS && I2C && ACPI + select SND_SOC_ES8316 + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for Intel(R) Baytrail & + Cherrytrail platforms with ES8316 audio codec. + If unsure select "N". + +config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH + tristate "ASoC Audio driver for Intel Baytrail & Cherrytrail platform with no codec (MinnowBoard MAX, Up)" + depends on X86_INTEL_LPSS && I2C && ACPI + depends on SND_SST_ATOM_HIFI2_PLATFORM + select SND_SST_IPC_ACPI + help + This adds support for ASoC machine driver for the MinnowBoard Max or + Up boards and provides access to I2S signals on the Low-Speed + connector + If unsure select "N". + +config SND_SOC_INTEL_SKL_RT286_MACH + tristate "ASoC Audio driver for SKL with RT286 I2S mode" + depends on X86 && ACPI && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT286 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC machine driver for Skylake platforms + with RT286 I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH + tristate "ASoC Audio driver for SKL with NAU88L25 and SSM4567 in I2S Mode" + depends on X86_INTEL_LPSS && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_NAU8825 + select SND_SOC_SSM4567 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + SSM4567. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH + tristate "ASoC Audio driver for SKL with NAU88L25 and MAX98357A in I2S Mode" + depends on X86_INTEL_LPSS && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_NAU8825 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for NAU88L25 + MAX98357A. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH + tristate "ASoC Audio driver for Broxton with DA7219 and MAX98357A in I2S Mode" + depends on X86 && ACPI && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_DA7219 + select SND_SOC_MAX98357A + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton-P platforms + with DA7219 + MAX98357A I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_BXT_RT298_MACH + tristate "ASoC Audio driver for Broxton with RT298 I2S mode" + depends on X86 && ACPI && I2C + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT298 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + select SND_HDA_DSP_LOADER + help + This adds support for ASoC machine driver for Broxton platforms + with RT286 I2S audio codec. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH + tristate "ASoC Audio driver for KBL with RT5663 and MAX98927 in I2S Mode" + depends on X86_INTEL_LPSS && I2C + select SND_SOC_INTEL_SST + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT5663 + select SND_SOC_MAX98927 + select SND_SOC_DMIC + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + MAX98927. + Say Y if you have such a device. + If unsure select "N". + +config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH + tristate "ASoC Audio driver for KBL with RT5663, RT5514 and MAX98927 in I2S Mode" + depends on X86_INTEL_LPSS && I2C && SPI + select SND_SOC_INTEL_SST + depends on SND_SOC_INTEL_SKYLAKE + select SND_SOC_RT5663 + select SND_SOC_RT5514 + select SND_SOC_RT5514_SPI + select SND_SOC_MAX98927 + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + RT5514 + MAX98927. + Say Y if you have such a device. + If unsure select "N". + +endif diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index ce35ec7884d1..f8a91a6f2a17 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -55,20 +55,6 @@ enum { BXT_DPCM_AUDIO_HDMI3_PB, }; -static inline struct snd_soc_dai *bxt_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - - if (!strncmp(rtd->codec_dai->name, BXT_DIALOG_CODEC_DAI, - strlen(BXT_DIALOG_CODEC_DAI))) - return rtd->codec_dai; - } - - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -77,7 +63,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_soc_card *card = dapm->card; struct snd_soc_dai *codec_dai; - codec_dai = bxt_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, BXT_DIALOG_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n"); return -EIO; diff --git a/sound/soc/intel/boards/bytcht_da7213.c b/sound/soc/intel/boards/bytcht_da7213.c index 18873e23f404..c4d82ad41bd7 100644 --- a/sound/soc/intel/boards/bytcht_da7213.c +++ b/sound/soc/intel/boards/bytcht_da7213.c @@ -27,9 +27,9 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/soc-acpi.h> #include "../../codecs/da7213.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" static const struct snd_kcontrol_new controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), @@ -185,19 +185,11 @@ static struct snd_soc_dai_link dailink[] = { .dpcm_playback = 1, .ops = &aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -231,19 +223,18 @@ static char codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */ static int bytcht_da7213_probe(struct platform_device *pdev) { - int ret_val = 0; - int i; struct snd_soc_card *card; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; int dai_index = 0; + int ret_val = 0; + int i; mach = (&pdev->dev)->platform_data; card = &bytcht_da7213_card; card->dev = &pdev->dev; /* fix index of codec dai */ - dai_index = MERR_DPCM_COMPR + 1; for (i = 0; i < ARRAY_SIZE(dailink); i++) { if (!strcmp(dailink[i].codec_name, "i2c-DLGS7213:00")) { dai_index = i; @@ -252,8 +243,8 @@ static int bytcht_da7213_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = sst_acpi_find_name_from_hid(mach->id); - if (i2c_name != NULL) { + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { snprintf(codec_name, sizeof(codec_name), "%s%s", "i2c-", i2c_name); dailink[dai_index].codec_name = codec_name; diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 52635462dac6..8088396717e3 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -29,28 +29,14 @@ #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> +#include <sound/soc-acpi.h> #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" #include "../common/sst-dsp.h" struct byt_cht_es8316_private { struct clk *mclk; }; -#define CODEC_DAI1 "ES8316 HiFi" - -static inline struct snd_soc_dai *get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, CODEC_DAI1, - strlen(CODEC_DAI1))) - return rtd->codec_dai; - } - return NULL; -} - static const struct snd_soc_dapm_widget byt_cht_es8316_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), @@ -208,22 +194,13 @@ static struct snd_soc_dai_link byt_cht_es8316_dais[] = { .ops = &byt_cht_es8316_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, - /* back ends */ { /* Only SSP2 has been tested here, so BYT-CR platforms that * require SSP0 will not work. */ .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, diff --git a/sound/soc/intel/boards/bytcht_nocodec.c b/sound/soc/intel/boards/bytcht_nocodec.c index 1dd9441806fa..b80ec027a0e8 100644 --- a/sound/soc/intel/boards/bytcht_nocodec.c +++ b/sound/soc/intel/boards/bytcht_nocodec.c @@ -133,19 +133,11 @@ static struct snd_soc_dai_link dais[] = { .dpcm_playback = 1, .ops = &aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-LowSpeed Connector", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 4a76b099a508..f2c0fc415e52 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -22,19 +22,19 @@ #include <linux/moduleparam.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/platform_sst_audio.h> -#include <linux/clk.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5640.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" #include "../common/sst-dsp.h" enum { @@ -44,13 +44,13 @@ enum { BYT_RT5640_IN3_MAP, }; -#define BYT_RT5640_MAP(quirk) ((quirk) & 0xff) +#define BYT_RT5640_MAP(quirk) ((quirk) & GENMASK(7, 0)) #define BYT_RT5640_DMIC_EN BIT(16) #define BYT_RT5640_MONO_SPEAKER BIT(17) #define BYT_RT5640_DIFF_MIC BIT(18) /* defaut is single-ended */ -#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ -#define BYT_RT5640_SSP0_AIF1 BIT(20) -#define BYT_RT5640_SSP0_AIF2 BIT(21) +#define BYT_RT5640_SSP2_AIF2 BIT(19) /* default is using AIF1 */ +#define BYT_RT5640_SSP0_AIF1 BIT(20) +#define BYT_RT5640_SSP0_AIF2 BIT(21) #define BYT_RT5640_MCLK_EN BIT(22) #define BYT_RT5640_MCLK_25MHZ BIT(23) @@ -145,22 +145,6 @@ static void log_quirks(struct device *dev) #define BYT_CODEC_DAI1 "rt5640-aif1" #define BYT_CODEC_DAI2 "rt5640-aif2" -static inline struct snd_soc_dai *byt_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI1, - strlen(BYT_CODEC_DAI1))) - return rtd->codec_dai; - if (!strncmp(rtd->codec_dai->name, BYT_CODEC_DAI2, - strlen(BYT_CODEC_DAI2))) - return rtd->codec_dai; - - } - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -170,7 +154,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); int ret; - codec_dai = byt_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); + if (!codec_dai) + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2); + if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); @@ -178,7 +165,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, } if (SND_SOC_DAPM_EVENT_ON(event)) { - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) { + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { ret = clk_prepare_enable(priv->mclk); if (ret < 0) { dev_err(card->dev, @@ -199,7 +186,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, 48000 * 512, SND_SOC_CLOCK_IN); if (!ret) { - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) clk_disable_unprepare(priv->mclk); } } @@ -376,8 +363,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -385,12 +372,11 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TAF"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MONO_SPEAKER | - BYT_RT5640_DIFF_MIC | - BYT_RT5640_SSP0_AIF2 | - BYT_RT5640_MCLK_EN - ), + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_MONO_SPEAKER | + BYT_RT5640_DIFF_MIC | + BYT_RT5640_SSP0_AIF2 | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -398,9 +384,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "DellInc."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Venue 8 Pro 5830"), }, - .driver_data = (unsigned long *)(BYT_RT5640_DMIC2_MAP | - BYT_RT5640_DMIC_EN | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_DMIC2_MAP | + BYT_RT5640_DMIC_EN | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -408,8 +394,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP ElitePad 1000 G2"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | - BYT_RT5640_MCLK_EN), + .driver_data = (void *)(BYT_RT5640_IN1_MAP | + BYT_RT5640_MCLK_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -417,8 +403,8 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), }, - .driver_data = (unsigned long *)(BYT_RT5640_DMIC1_MAP | - BYT_RT5640_DMIC_EN), + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_DMIC_EN), }, { .callback = byt_rt5640_quirk_cb, @@ -426,9 +412,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"), DMI_MATCH(DMI_BOARD_NAME, "tPAD"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP | - BYT_RT5640_MCLK_EN | - BYT_RT5640_SSP0_AIF1), + .driver_data = (void *)(BYT_RT5640_IN3_MAP | + BYT_RT5640_MCLK_EN | + BYT_RT5640_SSP0_AIF1), }, { .callback = byt_rt5640_quirk_cb, @@ -436,7 +422,7 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_NAME, "Aspire SW5-012"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN1_MAP | + .driver_data = (void *)(BYT_RT5640_IN1_MAP | BYT_RT5640_MCLK_EN | BYT_RT5640_SSP0_AIF1), @@ -446,9 +432,9 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), }, - .driver_data = (unsigned long *)(BYT_RT5640_IN3_MAP | - BYT_RT5640_MCLK_EN | - BYT_RT5640_SSP0_AIF1), + .driver_data = (void *)(BYT_RT5640_IN3_MAP | + BYT_RT5640_MCLK_EN | + BYT_RT5640_SSP0_AIF1), }, {} @@ -456,12 +442,12 @@ static const struct dmi_system_id byt_rt5640_quirk_table[] = { static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) { - int ret; - struct snd_soc_codec *codec = runtime->codec; struct snd_soc_card *card = runtime->card; - const struct snd_soc_dapm_route *custom_map; struct byt_rt5640_private *priv = snd_soc_card_get_drvdata(card); + struct snd_soc_codec *codec = runtime->codec; + const struct snd_soc_dapm_route *custom_map; int num_routes; + int ret; card->dapm.idle_bias_off = true; @@ -549,7 +535,7 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime) snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && priv->mclk) { + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { /* * The firmware might enable the clock at * boot (this information may or may not @@ -693,18 +679,10 @@ static struct snd_soc_dai_link byt_rt5640_dais[] = { .dpcm_playback = 1, .ops = &byt_rt5640_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Baytrail Compressed Port", - .stream_name = "Baytrail Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", /* overwritten for ssp0 routing */ .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -758,12 +736,12 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) { - int ret_val = 0; - struct sst_acpi_mach *mach; + struct byt_rt5640_private *priv; + struct snd_soc_acpi_mach *mach; const char *i2c_name = NULL; + int ret_val = 0; + int dai_index = 0; int i; - int dai_index; - struct byt_rt5640_private *priv; is_bytcr = false; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); @@ -776,7 +754,6 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) snd_soc_card_set_drvdata(&byt_rt5640_card, priv); /* fix index of codec dai */ - dai_index = MERR_DPCM_COMPR + 1; for (i = 0; i < ARRAY_SIZE(byt_rt5640_dais); i++) { if (!strcmp(byt_rt5640_dais[i].codec_name, "i2c-10EC5640:00")) { dai_index = i; @@ -785,8 +762,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = sst_acpi_find_name_from_hid(mach->id); - if (i2c_name != NULL) { + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { snprintf(byt_rt5640_codec_name, sizeof(byt_rt5640_codec_name), "%s%s", "i2c-", i2c_name); @@ -819,7 +796,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) /* format specified: 2 64-bit integers */ struct acpi_buffer format = {sizeof("NN"), "NN"}; struct acpi_buffer state = {0, NULL}; - struct sst_acpi_package_context pkg_ctx; + struct snd_soc_acpi_package_context pkg_ctx; bool pkg_found = false; state.length = sizeof(chan_package); @@ -831,7 +808,8 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) pkg_ctx.state = &state; pkg_ctx.data_valid = false; - pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx); + pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, + &pkg_ctx); if (pkg_found) { if (chan_package.aif_value == 1) { dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); @@ -891,7 +869,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) byt_rt5640_cpu_dai_name; } - if ((byt_rt5640_quirk & BYT_RT5640_MCLK_EN) && (is_valleyview())) { + if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) { priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { ret_val = PTR_ERR(priv->mclk); diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 4a3516b38c2c..d955836c6870 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -21,24 +21,124 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <linux/device.h> #include <linux/dmi.h> #include <linux/slab.h> +#include <asm/platform_sst_audio.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5651.h" #include "../atom/sst-atom-controls.h" +enum { + BYT_RT5651_DMIC_MAP, + BYT_RT5651_IN1_MAP, + BYT_RT5651_IN2_MAP, +}; + +#define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) +#define BYT_RT5651_DMIC_EN BIT(16) +#define BYT_RT5651_MCLK_EN BIT(17) +#define BYT_RT5651_MCLK_25MHZ BIT(18) + +struct byt_rt5651_private { + struct clk *mclk; + struct snd_soc_jack jack; +}; + +static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP | + BYT_RT5651_DMIC_EN | + BYT_RT5651_MCLK_EN; + +static void log_quirks(struct device *dev) +{ + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_DMIC_MAP) + dev_info(dev, "quirk DMIC_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) + dev_info(dev, "quirk IN1_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) + dev_info(dev, "quirk IN2_MAP enabled"); + if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) + dev_info(dev, "quirk DMIC enabled"); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) + dev_info(dev, "quirk MCLK_EN enabled"); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) + dev_info(dev, "quirk MCLK_25MHZ enabled"); +} + +#define BYT_CODEC_DAI1 "rt5651-aif1" + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); + int ret; + + codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1); + if (!codec_dai) { + dev_err(card->dev, + "Codec dai not found; Unable to set platform clock\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { + ret = clk_prepare_enable(priv->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; + } + } + ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1, + 48000 * 512, + SND_SOC_CLOCK_IN); + } else { + /* + * Set codec clock source to internal clock before + * turning off the platform clock. Codec needs clock + * for Jack detection and button press + */ + ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_RCCLK, + 48000 * 512, + SND_SOC_CLOCK_IN); + if (!ret) + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) + clk_disable_unprepare(priv->mclk); + } + + if (ret < 0) { + dev_err(card->dev, "can't set codec sysclk: %d\n", ret); + return ret; + } + + return 0; +} + static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Internal Mic", NULL), SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + }; static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Internal Mic", NULL, "Platform Clock"}, + {"Speaker", NULL, "Platform Clock"}, + {"AIF1 Playback", NULL, "ssp2 Tx"}, {"ssp2 Tx", NULL, "codec_out0"}, {"ssp2 Tx", NULL, "codec_out1"}, @@ -47,38 +147,30 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"ssp2 Rx", NULL, "AIF1 Capture"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ - {"IN2P", NULL, "Headset Mic"}, {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Speaker", NULL, "LOUTL"}, {"Speaker", NULL, "LOUTR"}, }; -static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic1_map[] = { - {"DMIC1", NULL, "Internal Mic"}, -}; - -static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic2_map[] = { - {"DMIC2", NULL, "Internal Mic"}, +static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { + {"IN2P", NULL, "Headset Mic"}, + {"DMIC L1", NULL, "Internal Mic"}, + {"DMIC R1", NULL, "Internal Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, + {"IN2P", NULL, "Headset Mic"}, {"IN1P", NULL, "Internal Mic"}, }; -enum { - BYT_RT5651_DMIC1_MAP, - BYT_RT5651_DMIC2_MAP, - BYT_RT5651_IN1_MAP, +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { + {"Internal Mic", NULL, "micbias1"}, + {"IN1P", NULL, "Headset Mic"}, + {"IN2P", NULL, "Internal Mic"}, }; -#define BYT_RT5651_MAP(quirk) ((quirk) & 0xff) -#define BYT_RT5651_DMIC_EN BIT(16) - -static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC1_MAP | - BYT_RT5651_DMIC_EN; - static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -86,6 +178,17 @@ static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Speaker"), }; +static struct snd_soc_jack_pin bytcr_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { @@ -103,9 +206,26 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, return ret; } - ret = snd_soc_dai_set_pll(codec_dai, 0, RT5651_PLL1_S_BCLK1, - params_rate(params) * 50, - params_rate(params) * 512); + if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) { + /* 2x25 bit slots on SSP2 */ + ret = snd_soc_dai_set_pll(codec_dai, 0, + RT5651_PLL1_S_BCLK1, + params_rate(params) * 50, + params_rate(params) * 512); + } else { + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) { + ret = snd_soc_dai_set_pll(codec_dai, 0, + RT5651_PLL1_S_MCLK, + 25000000, + params_rate(params) * 512); + } else { + ret = snd_soc_dai_set_pll(codec_dai, 0, + RT5651_PLL1_S_MCLK, + 19200000, + params_rate(params) * 512); + } + } + if (ret < 0) { dev_err(rtd->dev, "can't set codec pll: %d\n", ret); return ret; @@ -114,33 +234,60 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream, return 0; } +static int byt_rt5651_quirk_cb(const struct dmi_system_id *id) +{ + byt_rt5651_quirk = (unsigned long)id->driver_data; + return 1; +} + static const struct dmi_system_id byt_rt5651_quirk_table[] = { + { + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Circuitco"), + DMI_MATCH(DMI_PRODUCT_NAME, "Minnowboard Max B3 PLATFORM"), + }, + .driver_data = (void *)(BYT_RT5651_DMIC_MAP | + BYT_RT5651_DMIC_EN), + }, + { + .callback = byt_rt5651_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "KIANO"), + DMI_MATCH(DMI_PRODUCT_NAME, "KIANO SlimNote 14.2"), + }, + .driver_data = (void *)(BYT_RT5651_IN2_MAP), + }, {} }; static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) { - int ret; struct snd_soc_card *card = runtime->card; + struct snd_soc_codec *codec = runtime->codec; + struct byt_rt5651_private *priv = snd_soc_card_get_drvdata(card); const struct snd_soc_dapm_route *custom_map; int num_routes; + int ret; card->dapm.idle_bias_off = true; - dmi_check_system(byt_rt5651_quirk_table); switch (BYT_RT5651_MAP(byt_rt5651_quirk)) { case BYT_RT5651_IN1_MAP: custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; - case BYT_RT5651_DMIC2_MAP: - custom_map = byt_rt5651_intmic_dmic2_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic2_map); + case BYT_RT5651_IN2_MAP: + custom_map = byt_rt5651_intmic_in2_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); break; default: - custom_map = byt_rt5651_intmic_dmic1_map; - num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic1_map); + custom_map = byt_rt5651_intmic_dmic_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); } + ret = snd_soc_dapm_add_routes(&card->dapm, custom_map, num_routes); + if (ret) + return ret; ret = snd_soc_add_card_controls(card, byt_rt5651_controls, ARRAY_SIZE(byt_rt5651_controls)); @@ -151,6 +298,40 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone"); snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker"); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(priv->mclk); + if (!ret) + clk_disable_unprepare(priv->mclk); + + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) + ret = clk_set_rate(priv->mclk, 25000000); + else + ret = clk_set_rate(priv->mclk, 19200000); + + if (ret) + dev_err(card->dev, "unable to set MCLK rate\n"); + } + + ret = snd_soc_card_jack_new(runtime->card, "Headset", + SND_JACK_HEADSET, &priv->jack, + bytcr_jack_pins, ARRAY_SIZE(bytcr_jack_pins)); + if (ret) { + dev_err(runtime->dev, "Headset jack creation failed %d\n", ret); + return ret; + } + + rt5651_set_jack_detect(codec, &priv->jack); + return ret; } @@ -253,19 +434,11 @@ static struct snd_soc_dai_link byt_rt5651_dais[] = { .dpcm_playback = 1, .ops = &byt_rt5651_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -296,13 +469,65 @@ static struct snd_soc_card byt_rt5651_card = { .fully_routed = true, }; +static char byt_rt5651_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */ + static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) { + struct byt_rt5651_private *priv; + struct snd_soc_acpi_mach *mach; + const char *i2c_name = NULL; int ret_val = 0; + int dai_index = 0; + int i; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_ATOMIC); + if (!priv) + return -ENOMEM; /* register the soc card */ byt_rt5651_card.dev = &pdev->dev; + mach = byt_rt5651_card.dev->platform_data; + snd_soc_card_set_drvdata(&byt_rt5651_card, priv); + + /* fix index of codec dai */ + for (i = 0; i < ARRAY_SIZE(byt_rt5651_dais); i++) { + if (!strcmp(byt_rt5651_dais[i].codec_name, "i2c-10EC5651:00")) { + dai_index = i; + break; + } + } + + /* fixup codec name based on HID */ + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { + snprintf(byt_rt5651_codec_name, sizeof(byt_rt5651_codec_name), + "%s%s", "i2c-", i2c_name); + + byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name; + } + + /* check quirks before creating card */ + dmi_check_system(byt_rt5651_quirk_table); + log_quirks(&pdev->dev); + + if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { + priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(priv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(priv->mclk)); + /* + * Fall back to bit clock usage for -ENOENT (clock not + * available likely due to missing dependencies), bail + * for all other errors, including -EPROBE_DEFER + */ + if (ret_val != -ENOENT) + return ret_val; + byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; + } + } + ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card); if (ret_val) { diff --git a/sound/soc/intel/boards/cht_bsw_max98090_ti.c b/sound/soc/intel/boards/cht_bsw_max98090_ti.c index 20755ecc7f9e..d3e1c7e12004 100644 --- a/sound/soc/intel/boards/cht_bsw_max98090_ti.c +++ b/sound/soc/intel/boards/cht_bsw_max98090_ti.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/acpi.h> +#include <linux/clk.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> @@ -35,15 +36,48 @@ #define CHT_CODEC_DAI "HiFi" struct cht_mc_private { + struct clk *mclk; struct snd_soc_jack jack; bool ts3a227e_present; }; +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + int ret; + + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + ret = clk_prepare_enable(ctx->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; + } + } else { + clk_disable_unprepare(ctx->mclk); + } + + return 0; +} + static const struct snd_soc_dapm_widget cht_dapm_widgets[] = { SND_SOC_DAPM_HP("Headphone", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), SND_SOC_DAPM_MIC("Int Mic", NULL), SND_SOC_DAPM_SPK("Ext Spk", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), }; static const struct snd_soc_dapm_route cht_audio_map[] = { @@ -60,6 +94,10 @@ static const struct snd_soc_dapm_route cht_audio_map[] = { {"codec_in0", NULL, "ssp2 Rx" }, {"codec_in1", NULL, "ssp2 Rx" }, {"ssp2 Rx", NULL, "HiFi Capture"}, + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Int Mic", NULL, "Platform Clock"}, + {"Ext Spk", NULL, "Platform Clock"}, }; static const struct snd_kcontrol_new cht_mc_controls[] = { @@ -109,6 +147,40 @@ static struct notifier_block cht_jack_nb = { .notifier_call = cht_ti_jack_event, }; +static struct snd_soc_jack_pin hs_jack_pins[] = { + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, +}; + +static struct snd_soc_jack_gpio hs_jack_gpios[] = { + { + .name = "hp", + .report = SND_JACK_HEADPHONE | SND_JACK_LINEOUT, + .debounce_time = 200, + }, + { + .name = "mic", + .invert = 1, + .report = SND_JACK_MICROPHONE, + .debounce_time = 200, + }, +}; + +static const struct acpi_gpio_params hp_gpios = { 0, 0, false }; +static const struct acpi_gpio_params mic_gpios = { 1, 0, false }; + +static const struct acpi_gpio_mapping acpi_max98090_gpios[] = { + { "hp-gpios", &hp_gpios, 1 }, + { "mic-gpios", &mic_gpios, 1 }, + {}, +}; + static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) { int ret; @@ -116,30 +188,55 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); struct snd_soc_jack *jack = &ctx->jack; - /** - * TI supports 4 butons headset detection - * KEY_MEDIA - * KEY_VOICECOMMAND - * KEY_VOLUMEUP - * KEY_VOLUMEDOWN - */ - if (ctx->ts3a227e_present) - jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | - SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3; - else - jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE; + if (ctx->ts3a227e_present) { + /* + * The jack has already been created in the + * cht_max98090_headset_init() function. + */ + snd_soc_jack_notifier_register(jack, &cht_jack_nb); + return 0; + } - ret = snd_soc_card_jack_new(runtime->card, "Headset Jack", - jack_type, jack, NULL, 0); + jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE; + ret = snd_soc_card_jack_new(runtime->card, "Headset Jack", + jack_type, jack, + hs_jack_pins, ARRAY_SIZE(hs_jack_pins)); if (ret) { dev_err(runtime->dev, "Headset Jack creation failed %d\n", ret); return ret; } - if (ctx->ts3a227e_present) - snd_soc_jack_notifier_register(jack, &cht_jack_nb); + ret = snd_soc_jack_add_gpiods(runtime->card->dev->parent, jack, + ARRAY_SIZE(hs_jack_gpios), + hs_jack_gpios); + if (ret) { + /* + * flag error but don't bail if jack detect is broken + * due to platform issues or bad BIOS/configuration + */ + dev_err(runtime->dev, + "jack detection gpios not added, error %d\n", ret); + } + + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(ctx->mclk); + if (!ret) + clk_disable_unprepare(ctx->mclk); + + ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + + if (ret) + dev_err(runtime->dev, "unable to set MCLK rate\n"); return ret; } @@ -160,7 +257,7 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, return ret; } - fmt = SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF + fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS; ret = snd_soc_dai_set_fmt(rtd->cpu_dai, fmt); @@ -173,8 +270,8 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, rate->min = rate->max = 48000; channels->min = channels->max = 2; - /* set SSP2 to 24-bit */ - params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + /* set SSP2 to 16-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S16_LE); return 0; } @@ -188,8 +285,29 @@ static int cht_max98090_headset_init(struct snd_soc_component *component) { struct snd_soc_card *card = component->card; struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + struct snd_soc_jack *jack = &ctx->jack; + int jack_type; + int ret; - return ts3a227e_enable_jack_detect(component, &ctx->jack); + /* + * TI supports 4 butons headset detection + * KEY_MEDIA + * KEY_VOICECOMMAND + * KEY_VOLUMEUP + * KEY_VOLUMEDOWN + */ + jack_type = SND_JACK_HEADPHONE | SND_JACK_MICROPHONE | + SND_JACK_BTN_0 | SND_JACK_BTN_1 | + SND_JACK_BTN_2 | SND_JACK_BTN_3; + + ret = snd_soc_card_jack_new(card, "Headset Jack", jack_type, + jack, NULL, 0); + if (ret) { + dev_err(card->dev, "Headset Jack creation failed %d\n", ret); + return ret; + } + + return ts3a227e_enable_jack_detect(component, jack); } static const struct snd_soc_ops cht_aif1_ops = { @@ -232,18 +350,10 @@ static struct snd_soc_dai_link cht_dailink[] = { .dpcm_playback = 1, .ops = &cht_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -277,6 +387,7 @@ static struct snd_soc_card snd_soc_card_cht = { static int snd_cht_mc_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; int ret_val = 0; struct cht_mc_private *drv; @@ -289,11 +400,25 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* no need probe TI jack detection chip */ snd_soc_card_cht.aux_dev = NULL; snd_soc_card_cht.num_aux_devs = 0; + + ret_val = devm_acpi_dev_add_driver_gpios(dev->parent, + acpi_max98090_gpios); + if (ret_val) + dev_dbg(dev, "Unable to add GPIO mapping table\n"); } /* register the soc card */ snd_soc_card_cht.dev = &pdev->dev; snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); + + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); + } + ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht); if (ret_val) { dev_err(&pdev->dev, diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c index 5bcde01d15e6..18d129caa974 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5645.c +++ b/sound/soc/intel/boards/cht_bsw_rt5645.c @@ -21,20 +21,20 @@ */ #include <linux/module.h> -#include <linux/acpi.h> #include <linux/platform_device.h> +#include <linux/acpi.h> +#include <linux/clk.h> #include <linux/dmi.h> #include <linux/slab.h> #include <asm/cpu_device_id.h> #include <asm/platform_sst_audio.h> -#include <linux/clk.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5645.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" #define CHT_PLAT_CLK_3_HZ 19200000 #define CHT_CODEC_DAI1 "rt5645-aif1" @@ -53,7 +53,7 @@ struct cht_mc_private { struct clk *mclk; }; -#define CHT_RT5645_MAP(quirk) ((quirk) & 0xff) +#define CHT_RT5645_MAP(quirk) ((quirk) & GENMASK(7, 0)) #define CHT_RT5645_SSP2_AIF2 BIT(16) /* default is using AIF1 */ #define CHT_RT5645_SSP0_AIF1 BIT(17) #define CHT_RT5645_SSP0_AIF2 BIT(18) @@ -70,21 +70,6 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk SSP0_AIF2 enabled"); } -static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI1, - strlen(CHT_CODEC_DAI1))) - return rtd->codec_dai; - if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI2, - strlen(CHT_CODEC_DAI2))) - return rtd->codec_dai; - } - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -94,20 +79,21 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); int ret; - codec_dai = cht_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI1); + if (!codec_dai) + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI2); + if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; } if (SND_SOC_DAPM_EVENT_ON(event)) { - if (ctx->mclk) { - ret = clk_prepare_enable(ctx->mclk); - if (ret < 0) { - dev_err(card->dev, - "could not configure MCLK state"); - return ret; - } + ret = clk_prepare_enable(ctx->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; } } else { /* Set codec sysclk source to its internal clock because codec PLL will @@ -122,8 +108,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return ret; } - if (ctx->mclk) - clk_disable_unprepare(ctx->mclk); + clk_disable_unprepare(ctx->mclk); } return 0; @@ -258,11 +243,11 @@ static const struct dmi_system_id cht_rt5645_quirk_table[] = { static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) { - int ret; - int jack_type; - struct snd_soc_codec *codec = runtime->codec; struct snd_soc_card *card = runtime->card; struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); + struct snd_soc_codec *codec = runtime->codec; + int jack_type; + int ret; if ((cht_rt5645_quirk & CHT_RT5645_SSP2_AIF2) || (cht_rt5645_quirk & CHT_RT5645_SSP0_AIF2)) { @@ -320,26 +305,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack); - if (ctx->mclk) { - /* - * The firmware might enable the clock at - * boot (this information may or may not - * be reflected in the enable clock register). - * To change the rate we must disable the clock - * first to cover these cases. Due to common - * clock framework restrictions that do not allow - * to disable a clock that has not been enabled, - * we need to enable the clock first. - */ - ret = clk_prepare_enable(ctx->mclk); - if (!ret) - clk_disable_unprepare(ctx->mclk); - ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(ctx->mclk); + if (!ret) + clk_disable_unprepare(ctx->mclk); + + ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + + if (ret) + dev_err(runtime->dev, "unable to set MCLK rate\n"); - if (ret) - dev_err(runtime->dev, "unable to set MCLK rate\n"); - } return ret; } @@ -460,19 +445,11 @@ static struct snd_soc_dai_link cht_dailink[] = { .dpcm_playback = 1, .ops = &cht_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* CODEC<->CODEC link */ /* back ends */ { .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -545,15 +522,15 @@ struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */ static int snd_cht_mc_probe(struct platform_device *pdev) { - int ret_val = 0; - int i; - struct cht_mc_private *drv; struct snd_soc_card *card = snd_soc_cards[0].soc_card; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; + struct cht_mc_private *drv; const char *i2c_name = NULL; - int dai_index = 0; bool found = false; bool is_bytcr = false; + int dai_index = 0; + int ret_val = 0; + int i; drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC); if (!drv) @@ -589,8 +566,8 @@ static int snd_cht_mc_probe(struct platform_device *pdev) } /* fixup codec name based on HID */ - i2c_name = sst_acpi_find_name_from_hid(mach->id); - if (i2c_name != NULL) { + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); + if (i2c_name) { snprintf(cht_rt5645_codec_name, sizeof(cht_rt5645_codec_name), "%s%s", "i2c-", i2c_name); cht_dailink[dai_index].codec_name = cht_rt5645_codec_name; @@ -622,7 +599,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* format specified: 2 64-bit integers */ struct acpi_buffer format = {sizeof("NN"), "NN"}; struct acpi_buffer state = {0, NULL}; - struct sst_acpi_package_context pkg_ctx; + struct snd_soc_acpi_package_context pkg_ctx; bool pkg_found = false; state.length = sizeof(chan_package); @@ -634,7 +611,8 @@ static int snd_cht_mc_probe(struct platform_device *pdev) pkg_ctx.state = &state; pkg_ctx.data_valid = false; - pkg_found = sst_acpi_find_package_from_hid(mach->id, &pkg_ctx); + pkg_found = snd_soc_acpi_find_package_from_hid(mach->id, + &pkg_ctx); if (pkg_found) { if (chan_package.aif_value == 1) { dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n"); @@ -682,14 +660,12 @@ static int snd_cht_mc_probe(struct platform_device *pdev) cht_rt5645_cpu_dai_name; } - if (is_valleyview()) { - drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); - if (IS_ERR(drv->mclk)) { - dev_err(&pdev->dev, - "Failed to get MCLK from pmc_plt_clk_3: %ld\n", - PTR_ERR(drv->mclk)); - return PTR_ERR(drv->mclk); - } + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); } snd_soc_card_set_drvdata(card, drv); diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index f597d5582223..f8f21eee9b2d 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -20,14 +20,14 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/clk.h> -#include <asm/cpu_device_id.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> #include <sound/jack.h> +#include <sound/soc-acpi.h> #include "../../codecs/rt5670.h" #include "../atom/sst-atom-controls.h" -#include "../common/sst-acpi.h" + /* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */ #define CHT_PLAT_CLK_3_HZ 19200000 @@ -51,18 +51,6 @@ static struct snd_soc_jack_pin cht_bsw_headset_pins[] = { }, }; -static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - if (!strncmp(rtd->codec_dai->name, CHT_CODEC_DAI, - strlen(CHT_CODEC_DAI))) - return rtd->codec_dai; - } - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -72,7 +60,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); int ret; - codec_dai = cht_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; @@ -315,20 +303,12 @@ static struct snd_soc_dai_link cht_dailink[] = { .dpcm_playback = 1, .ops = &cht_aif1_ops, }, - [MERR_DPCM_COMPR] = { - .name = "Compressed Port", - .stream_name = "Compress", - .cpu_dai_name = "compress-cpu-dai", - .codec_dai_name = "snd-soc-dummy-dai", - .codec_name = "snd-soc-dummy", - .platform_name = "sst-mfld-platform", - }, /* Back End DAI links */ { /* SSP2 - Codec */ .name = "SSP2-Codec", - .id = 1, + .id = 0, .cpu_dai_name = "ssp2-port", .platform_name = "sst-mfld-platform", .no_pcm = 1, @@ -348,9 +328,11 @@ static struct snd_soc_dai_link cht_dailink[] = { static int cht_suspend_pre(struct snd_soc_card *card) { struct snd_soc_component *component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); list_for_each_entry(component, &card->component_dev_list, card_list) { - if (!strcmp(component->name, "i2c-10EC5670:00")) { + if (!strncmp(component->name, + ctx->codec_name, sizeof(ctx->codec_name))) { struct snd_soc_codec *codec = snd_soc_component_to_codec(component); dev_dbg(codec->dev, "disabling jack detect before going to suspend.\n"); @@ -364,9 +346,11 @@ static int cht_suspend_pre(struct snd_soc_card *card) static int cht_resume_post(struct snd_soc_card *card) { struct snd_soc_component *component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); list_for_each_entry(component, &card->component_dev_list, card_list) { - if (!strcmp(component->name, "i2c-10EC5670:00")) { + if (!strncmp(component->name, + ctx->codec_name, sizeof(ctx->codec_name))) { struct snd_soc_codec *codec = snd_soc_component_to_codec(component); dev_dbg(codec->dev, "enabling jack detect for resume.\n"); @@ -380,7 +364,7 @@ static int cht_resume_post(struct snd_soc_card *card) /* SoC card */ static struct snd_soc_card snd_soc_card_cht = { - .name = "cherrytrailcraudio", + .name = "cht-bsw-rt5672", .owner = THIS_MODULE, .dai_link = cht_dailink, .num_links = ARRAY_SIZE(cht_dailink), @@ -394,25 +378,13 @@ static struct snd_soc_card snd_soc_card_cht = { .resume_post = cht_resume_post, }; -static bool is_valleyview(void) -{ - static const struct x86_cpu_id cpu_ids[] = { - { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */ - {} - }; - - if (!x86_match_cpu(cpu_ids)) - return false; - return true; -} - #define RT5672_I2C_DEFAULT "i2c-10EC5670:00" static int snd_cht_mc_probe(struct platform_device *pdev) { int ret_val = 0; struct cht_mc_private *drv; - struct sst_acpi_mach *mach = pdev->dev.platform_data; + struct snd_soc_acpi_mach *mach = pdev->dev.platform_data; const char *i2c_name; int i; @@ -424,7 +396,7 @@ static int snd_cht_mc_probe(struct platform_device *pdev) /* fixup codec name based on HID */ if (mach) { - i2c_name = sst_acpi_find_name_from_hid(mach->id); + i2c_name = snd_soc_acpi_find_name_from_hid(mach->id); if (i2c_name) { snprintf(drv->codec_name, sizeof(drv->codec_name), "i2c-%s", i2c_name); @@ -439,14 +411,12 @@ static int snd_cht_mc_probe(struct platform_device *pdev) } } - if (is_valleyview()) { - drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); - if (IS_ERR(drv->mclk)) { - dev_err(&pdev->dev, - "Failed to get MCLK from pmc_plt_clk_3: %ld\n", - PTR_ERR(drv->mclk)); - return PTR_ERR(drv->mclk); - } + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); } snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); diff --git a/sound/soc/intel/boards/kbl_rt5663_max98927.c b/sound/soc/intel/boards/kbl_rt5663_max98927.c index 7f7607420706..6f9a8bcf20f3 100644 --- a/sound/soc/intel/boards/kbl_rt5663_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_max98927.c @@ -17,6 +17,7 @@ * GNU General Public License for more details. */ +#include <linux/input.h> #include <linux/module.h> #include <linux/platform_device.h> #include <sound/core.h> @@ -208,6 +209,7 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd) int ret; struct kbl_rt5663_private *ctx = snd_soc_card_get_drvdata(rtd->card); struct snd_soc_codec *codec = rtd->codec; + struct snd_soc_jack *jack; /* * Headset buttons map to the google Reference headset. @@ -221,6 +223,13 @@ static int kabylake_rt5663_codec_init(struct snd_soc_pcm_runtime *rtd) dev_err(rtd->dev, "Headset Jack creation failed %d\n", ret); return ret; } + + jack = &ctx->kabylake_headset; + snd_jack_set_key(jack->jack, SND_JACK_BTN_0, KEY_MEDIA); + snd_jack_set_key(jack->jack, SND_JACK_BTN_1, KEY_VOICECOMMAND); + snd_jack_set_key(jack->jack, SND_JACK_BTN_2, KEY_VOLUMEUP); + snd_jack_set_key(jack->jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN); + rt5663_set_jack_detect(codec, &ctx->kabylake_headset); return ret; } @@ -341,13 +350,28 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS); struct snd_mask *fmt = hw_param_mask(params, SNDRV_PCM_HW_PARAM_FORMAT); + struct snd_soc_dpcm *dpcm = container_of( + params, struct snd_soc_dpcm, hw_params); + struct snd_soc_dai_link *fe_dai_link = dpcm->fe->dai_link; + struct snd_soc_dai_link *be_dai_link = dpcm->be->dai_link; - /* The ADSP will convert the FE rate to 48k, stereo */ - rate->min = rate->max = 48000; - channels->min = channels->max = 2; - /* set SSP1 to 24 bit */ - snd_mask_none(fmt); - snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + /* + * The ADSP will convert the FE rate to 48k, stereo, 24 bit + */ + if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || + !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || + !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + snd_mask_none(fmt); + snd_mask_set(fmt, SNDRV_PCM_FORMAT_S24_LE); + } + /* + * The speaker on the SSP0 supports S16_LE and not S24_LE. + * thus changing the mask here + */ + if (!strcmp(be_dai_link->name, "SSP0-Codec")) + snd_mask_set(fmt, SNDRV_PCM_FORMAT_S16_LE); return 0; } @@ -390,6 +414,43 @@ static int kabylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } +static int kabylake_ssp0_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + int ret = 0, j; + + for (j = 0; j < rtd->num_codecs; j++) { + struct snd_soc_dai *codec_dai = rtd->codec_dais[j]; + + if (!strcmp(codec_dai->component->name, MAXIM_DEV0_NAME)) { + /* + * Use channel 4 and 5 for the first amp + */ + ret = snd_soc_dai_set_tdm_slot(codec_dai, 0x30, 3, 8, 16); + if (ret < 0) { + dev_err(rtd->dev, "set TDM slot err:%d\n", ret); + return ret; + } + } + if (!strcmp(codec_dai->component->name, MAXIM_DEV1_NAME)) { + /* + * Use channel 6 and 7 for the second amp + */ + ret = snd_soc_dai_set_tdm_slot(codec_dai, 0xC0, 3, 8, 16); + if (ret < 0) { + dev_err(rtd->dev, "set TDM slot err:%d\n", ret); + return ret; + } + } + } + return ret; +} + +static struct snd_soc_ops kabylake_ssp0_ops = { + .hw_params = kabylake_ssp0_hw_params, +}; + static unsigned int channels_dmic[] = { 2, 4, }; @@ -593,12 +654,13 @@ static struct snd_soc_dai_link kabylake_dais[] = { .no_pcm = 1, .codecs = max98927_codec_components, .num_codecs = ARRAY_SIZE(max98927_codec_components), - .dai_fmt = SND_SOC_DAIFMT_I2S | + .dai_fmt = SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS, .ignore_pmdown_time = 1, .be_hw_params_fixup = kabylake_ssp_fixup, .dpcm_playback = 1, + .ops = &kabylake_ssp0_ops, }, { /* SSP1 - Codec */ diff --git a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c index 88ff54220007..6072164f2d43 100644 --- a/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c +++ b/sound/soc/intel/boards/kbl_rt5663_rt5514_max98927.c @@ -302,6 +302,7 @@ static int kabylake_ssp_fixup(struct snd_soc_pcm_runtime *rtd, * The ADSP will convert the FE rate to 48k, stereo, 24 bit */ if (!strcmp(fe_dai_link->name, "Kbl Audio Port") || + !strcmp(fe_dai_link->name, "Kbl Audio Headset Playback") || !strcmp(fe_dai_link->name, "Kbl Audio Capture Port")) { rate->min = rate->max = 48000; channels->min = channels->max = 2; @@ -604,6 +605,8 @@ static int kabylake_card_late_probe(struct snd_soc_card *card) list_for_each_entry(pcm, &ctx->hdmi_pcm_list, head) { codec = pcm->codec_dai->codec; + snprintf(jack_name, sizeof(jack_name), + "HDMI/DP,pcm=%d Jack", pcm->device); err = snd_soc_card_jack_new(card, jack_name, SND_JACK_AVOUT, &ctx->kabylake_hdmi[i], NULL, 0); diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index 5ed0aa27b467..1b5a689dc99b 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -54,20 +54,6 @@ enum { SKL_DPCM_AUDIO_HDMI3_PB, }; -static inline struct snd_soc_dai *skl_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - - if (!strncmp(rtd->codec_dai->name, SKL_NUVOTON_CODEC_DAI, - strlen(SKL_NUVOTON_CODEC_DAI))) - return rtd->codec_dai; - } - - return NULL; -} - static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { @@ -76,7 +62,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_soc_dai *codec_dai; int ret; - codec_dai = skl_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); return -EIO; diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 01b8b140bb08..7bea4bc77481 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -57,20 +57,6 @@ enum { SKL_DPCM_AUDIO_HDMI3_PB, }; -static inline struct snd_soc_dai *skl_get_codec_dai(struct snd_soc_card *card) -{ - struct snd_soc_pcm_runtime *rtd; - - list_for_each_entry(rtd, &card->rtd_list, list) { - - if (!strncmp(rtd->codec_dai->name, SKL_NUVOTON_CODEC_DAI, - strlen(SKL_NUVOTON_CODEC_DAI))) - return rtd->codec_dai; - } - - return NULL; -} - static const struct snd_kcontrol_new skylake_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone Jack"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -86,7 +72,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, struct snd_soc_dai *codec_dai; int ret; - codec_dai = skl_get_codec_dai(card); + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); if (!codec_dai) { dev_err(card->dev, "Codec dai not found\n"); return -EIO; diff --git a/sound/soc/intel/common/Makefile b/sound/soc/intel/common/Makefile index 0e029f354f6b..7379d8830c39 100644 --- a/sound/soc/intel/common/Makefile +++ b/sound/soc/intel/common/Makefile @@ -1,11 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 snd-soc-sst-dsp-objs := sst-dsp.o snd-soc-sst-acpi-objs := sst-acpi.o -snd-soc-sst-match-objs := sst-match-acpi.o snd-soc-sst-ipc-objs := sst-ipc.o snd-soc-sst-firmware-objs := sst-firmware.o +snd-soc-acpi-intel-match-objs := soc-acpi-intel-byt-match.o soc-acpi-intel-cht-match.o soc-acpi-intel-hsw-bdw-match.o obj-$(CONFIG_SND_SOC_INTEL_SST) += snd-soc-sst-dsp.o snd-soc-sst-ipc.o obj-$(CONFIG_SND_SOC_INTEL_SST_ACPI) += snd-soc-sst-acpi.o -obj-$(CONFIG_SND_SOC_INTEL_SST_MATCH) += snd-soc-sst-match.o obj-$(CONFIG_SND_SOC_INTEL_SST_FIRMWARE) += snd-soc-sst-firmware.o +obj-$(CONFIG_SND_SOC_ACPI_INTEL_MATCH) += snd-soc-acpi-intel-match.o diff --git a/sound/soc/intel/common/soc-acpi-intel-byt-match.c b/sound/soc/intel/common/soc-acpi-intel-byt-match.c new file mode 100644 index 000000000000..bfe1ca68a542 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-byt-match.c @@ -0,0 +1,196 @@ +/* + * soc-apci-intel-byt-match.c - tables and support for BYT ACPI enumeration. + * + * Copyright (c) 2017, Intel Corporation. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/dmi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> + +static unsigned long byt_machine_id; + +#define BYT_THINKPAD_10 1 + +static int byt_thinkpad10_quirk_cb(const struct dmi_system_id *id) +{ + byt_machine_id = BYT_THINKPAD_10; + return 1; +} + + +static const struct dmi_system_id byt_table[] = { + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), + }, + }, + { } +}; + +static struct snd_soc_acpi_mach byt_thinkpad_10 = { + .id = "10EC5640", + .drv_name = "cht-bsw-rt5672", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5670.tplg", + .asoc_plat_name = "sst-mfld-platform", +}; + +static struct snd_soc_acpi_mach *byt_quirk(void *arg) +{ + struct snd_soc_acpi_mach *mach = arg; + + dmi_check_system(byt_table); + + if (byt_machine_id == BYT_THINKPAD_10) + return &byt_thinkpad_10; + else + return mach; +} + +struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_legacy_machines[] = { + { + .id = "10EC5640", + .drv_name = "byt-rt5640", + .fw_filename = "intel/fw_sst_0f28.bin-48kHz_i2s_master", + }, + { + .id = "193C9890", + .drv_name = "byt-max98090", + .fw_filename = "intel/fw_sst_0f28.bin-48kHz_i2s_master", + }, + {} +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_baytrail_legacy_machines); + +struct snd_soc_acpi_mach snd_soc_acpi_intel_baytrail_machines[] = { + { + .id = "10EC5640", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5640", + .machine_quirk = byt_quirk, + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5642", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5640", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "INTCCFFD", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5640", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5651", + .drv_name = "bytcr_rt5651", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcr_rt5651", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5651.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7212", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7213", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* some Baytrail platforms rely on RT5645, use CHT machine driver */ + { + .id = "10EC5645", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5648", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* use CHT driver to Baytrail Chromebooks */ + { + .id = "193C9890", + .drv_name = "cht-bsw-max98090", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-byt.ri", + .sof_tplg_filename = "intel/reef-byt-max98090.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + { + .id = "80860F28", + .drv_name = "bytcht_nocodec", + .fw_filename = "intel/fw_sst_0f28.bin", + .board = "bytcht_nocodec", + }, +#endif + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_baytrail_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-cht-match.c b/sound/soc/intel/common/soc-acpi-intel-cht-match.c new file mode 100644 index 000000000000..b50a0d53846b --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-cht-match.c @@ -0,0 +1,194 @@ +/* + * soc-apci-intel-cht-match.c - tables and support for CHT ACPI enumeration. + * + * Copyright (c) 2017, Intel Corporation. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/dmi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> + +static unsigned long cht_machine_id; + +#define CHT_SURFACE_MACH 1 + +static int cht_surface_quirk_cb(const struct dmi_system_id *id) +{ + cht_machine_id = CHT_SURFACE_MACH; + return 1; +} + +static const struct dmi_system_id cht_table[] = { + { + .callback = cht_surface_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), + }, + }, + { } +}; + +static struct snd_soc_acpi_mach cht_surface_mach = { + .id = "10EC5640", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", +}; + +static struct snd_soc_acpi_mach *cht_quirk(void *arg) +{ + struct snd_soc_acpi_mach *mach = arg; + + dmi_check_system(cht_table); + + if (cht_machine_id == CHT_SURFACE_MACH) + return &cht_surface_mach; + else + return mach; +} + +/* Cherryview-based platforms: CherryTrail and Braswell */ +struct snd_soc_acpi_mach snd_soc_acpi_intel_cherrytrail_machines[] = { + { + .id = "10EC5670", + .drv_name = "cht-bsw-rt5672", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5670.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5672", + .drv_name = "cht-bsw-rt5672", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5670.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5645", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC5650", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC3270", + .drv_name = "cht-bsw-rt5645", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5645.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "193C9890", + .drv_name = "cht-bsw-max98090", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "cht-bsw", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-max98090.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7212", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "DLGS7213", + .drv_name = "bytcht_da7213", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_da7213", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-da7213.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "ESSX8316", + .drv_name = "bytcht_es8316", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_es8316", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-es8316.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* some CHT-T platforms rely on RT5640, use Baytrail machine driver */ + { + .id = "10EC5640", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_rt5640", + .machine_quirk = cht_quirk, + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + { + .id = "10EC3276", + .drv_name = "bytcr_rt5640", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_rt5640", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5640.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, + /* some CHT-T platforms rely on RT5651, use Baytrail machine driver */ + { + .id = "10EC5651", + .drv_name = "bytcr_rt5651", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcr_rt5651", + .sof_fw_filename = "intel/reef-cht.ri", + .sof_tplg_filename = "intel/reef-cht-rt5651.tplg", + .asoc_plat_name = "sst-mfld-platform", + }, +#if IS_ENABLED(CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH) + /* + * This is always last in the table so that it is selected only when + * enabled explicitly and there is no codec-related information in SSDT + */ + { + .id = "808622A8", + .drv_name = "bytcht_nocodec", + .fw_filename = "intel/fw_sst_22a8.bin", + .board = "bytcht_nocodec", + }, +#endif + {}, +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_cherrytrail_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c new file mode 100644 index 000000000000..e0e8c8c27528 --- /dev/null +++ b/sound/soc/intel/common/soc-acpi-intel-hsw-bdw-match.c @@ -0,0 +1,64 @@ +/* + * soc-apci-intel-hsw-bdw-match.c - tables and support for ACPI enumeration. + * + * Copyright (c) 2017, Intel Corporation. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/dmi.h> +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> + +struct snd_soc_acpi_mach snd_soc_acpi_intel_haswell_machines[] = { + { + .id = "INT33CA", + .drv_name = "haswell-audio", + .fw_filename = "intel/IntcSST1.bin", + .sof_fw_filename = "intel/reef-hsw.ri", + .sof_tplg_filename = "intel/reef-hsw.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + {} +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_haswell_machines); + +struct snd_soc_acpi_mach snd_soc_acpi_intel_broadwell_machines[] = { + { + .id = "INT343A", + .drv_name = "broadwell-audio", + .fw_filename = "intel/IntcSST2.bin", + .sof_fw_filename = "intel/reef-bdw.ri", + .sof_tplg_filename = "intel/reef-bdw-rt286.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + { + .id = "RT5677CE", + .drv_name = "bdw-rt5677", + .fw_filename = "intel/IntcSST2.bin", + .sof_fw_filename = "intel/reef-bdw.ri", + .sof_tplg_filename = "intel/reef-bdw-rt286.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + { + .id = "INT33CA", + .drv_name = "haswell-audio", + .fw_filename = "intel/IntcSST2.bin", + .sof_fw_filename = "intel/reef-bdw.ri", + .sof_tplg_filename = "intel/reef-bdw-rt5640.tplg", + .asoc_plat_name = "haswell-pcm-audio", + }, + {} +}; +EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_broadwell_machines); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/common/sst-acpi.c b/sound/soc/intel/common/sst-acpi.c index 1285cc597b6b..cf6fbbd4e378 100644 --- a/sound/soc/intel/common/sst-acpi.c +++ b/sound/soc/intel/common/sst-acpi.c @@ -21,7 +21,8 @@ #include <linux/platform_device.h> #include "sst-dsp.h" -#include "sst-acpi.h" +#include <sound/soc-acpi.h> +#include <sound/soc-acpi-intel-match.h> #define SST_LPT_DSP_DMA_ADDR_OFFSET 0x0F0000 #define SST_WPT_DSP_DMA_ADDR_OFFSET 0x0FE000 @@ -30,7 +31,7 @@ /* Descriptor for setting up SST platform data */ struct sst_acpi_desc { const char *drv_name; - struct sst_acpi_mach *machines; + struct snd_soc_acpi_mach *machines; /* Platform resource indexes. Must set to -1 if not used */ int resindex_lpe_base; int resindex_pcicfg_base; @@ -49,7 +50,7 @@ struct sst_acpi_priv { struct platform_device *pdev_pcm; struct sst_pdata sst_pdata; struct sst_acpi_desc *desc; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; }; static void sst_acpi_fw_cb(const struct firmware *fw, void *context) @@ -59,7 +60,7 @@ static void sst_acpi_fw_cb(const struct firmware *fw, void *context) struct sst_acpi_priv *sst_acpi = platform_get_drvdata(pdev); struct sst_pdata *sst_pdata = &sst_acpi->sst_pdata; struct sst_acpi_desc *desc = sst_acpi->desc; - struct sst_acpi_mach *mach = sst_acpi->mach; + struct snd_soc_acpi_mach *mach = sst_acpi->mach; sst_pdata->fw = fw; if (!fw) { @@ -85,7 +86,7 @@ static int sst_acpi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct sst_acpi_priv *sst_acpi; struct sst_pdata *sst_pdata; - struct sst_acpi_mach *mach; + struct snd_soc_acpi_mach *mach; struct sst_acpi_desc *desc; struct resource *mmio; int ret = 0; @@ -99,7 +100,7 @@ static int sst_acpi_probe(struct platform_device *pdev) return -ENODEV; desc = (struct sst_acpi_desc *)id->driver_data; - mach = sst_acpi_find_machine(desc->machines); + mach = snd_soc_acpi_find_machine(desc->machines); if (mach == NULL) { dev_err(dev, "No matching ASoC machine driver found\n"); return -ENODEV; @@ -179,14 +180,9 @@ static int sst_acpi_remove(struct platform_device *pdev) return 0; } -static struct sst_acpi_mach haswell_machines[] = { - { "INT33CA", "haswell-audio", "intel/IntcSST1.bin", NULL, NULL, NULL }, - {} -}; - static struct sst_acpi_desc sst_acpi_haswell_desc = { .drv_name = "haswell-pcm-audio", - .machines = haswell_machines, + .machines = snd_soc_acpi_intel_haswell_machines, .resindex_lpe_base = 0, .resindex_pcicfg_base = 1, .resindex_fw_base = -1, @@ -197,15 +193,9 @@ static struct sst_acpi_desc sst_acpi_haswell_desc = { .dma_size = SST_LPT_DSP_DMA_SIZE, }; -static struct sst_acpi_mach broadwell_machines[] = { - { "INT343A", "broadwell-audio", "intel/IntcSST2.bin", NULL, NULL, NULL }, - { "RT5677CE", "bdw-rt5677", "intel/IntcSST2.bin", NULL, NULL, NULL }, - {} -}; - static struct sst_acpi_desc sst_acpi_broadwell_desc = { .drv_name = "haswell-pcm-audio", - .machines = broadwell_machines, + .machines = snd_soc_acpi_intel_broadwell_machines, .resindex_lpe_base = 0, .resindex_pcicfg_base = 1, .resindex_fw_base = -1, @@ -217,15 +207,9 @@ static struct sst_acpi_desc sst_acpi_broadwell_desc = { }; #if !IS_ENABLED(CONFIG_SND_SST_IPC_ACPI) -static struct sst_acpi_mach baytrail_machines[] = { - { "10EC5640", "byt-rt5640", "intel/fw_sst_0f28.bin-48kHz_i2s_master", NULL, NULL, NULL }, - { "193C9890", "byt-max98090", "intel/fw_sst_0f28.bin-48kHz_i2s_master", NULL, NULL, NULL }, - {} -}; - static struct sst_acpi_desc sst_acpi_baytrail_desc = { .drv_name = "baytrail-pcm-audio", - .machines = baytrail_machines, + .machines = snd_soc_acpi_intel_baytrail_legacy_machines, .resindex_lpe_base = 0, .resindex_pcicfg_base = 1, .resindex_fw_base = 2, diff --git a/sound/soc/intel/common/sst-acpi.h b/sound/soc/intel/common/sst-acpi.h deleted file mode 100644 index afe9b87b8bd5..000000000000 --- a/sound/soc/intel/common/sst-acpi.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (C) 2013-15, Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/stddef.h> -#include <linux/acpi.h> - -struct sst_acpi_package_context { - char *name; /* package name */ - int length; /* number of elements */ - struct acpi_buffer *format; - struct acpi_buffer *state; - bool data_valid; -}; - -#if IS_ENABLED(CONFIG_ACPI) -/* translation fron HID to I2C name, needed for DAI codec_name */ -const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]); -bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN], - struct sst_acpi_package_context *ctx); -#else -static inline const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]) -{ - return NULL; -} -static inline bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN], - struct sst_acpi_package_context *ctx) -{ - return false; -} -#endif - -/* acpi match */ -struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines); - -/* acpi check hid */ -bool sst_acpi_check_hid(const u8 hid[ACPI_ID_LEN]); - -/* Descriptor for SST ASoC machine driver */ -struct sst_acpi_mach { - /* ACPI ID for the matching machine driver. Audio codec for instance */ - const u8 id[ACPI_ID_LEN]; - /* machine driver name */ - const char *drv_name; - /* firmware file name */ - const char *fw_filename; - - /* board name */ - const char *board; - struct sst_acpi_mach * (*machine_quirk)(void *arg); - const void *quirk_data; - void *pdata; -}; - -#define SST_ACPI_MAX_CODECS 3 - -/** - * struct sst_codecs: Structure to hold secondary codec information apart from - * the matched one, this data will be passed to the quirk function to match - * with the ACPI detected devices - * - * @num_codecs: number of secondary codecs used in the platform - * @codecs: holds the codec IDs - * - */ -struct sst_codecs { - int num_codecs; - u8 codecs[SST_ACPI_MAX_CODECS][ACPI_ID_LEN]; -}; - -/* check all codecs */ -struct sst_acpi_mach *sst_acpi_codec_list(void *arg); diff --git a/sound/soc/intel/common/sst-firmware.c b/sound/soc/intel/common/sst-firmware.c index a086c35f91bb..657afc02f1c4 100644 --- a/sound/soc/intel/common/sst-firmware.c +++ b/sound/soc/intel/common/sst-firmware.c @@ -19,6 +19,7 @@ #include <linux/sched.h> #include <linux/firmware.h> #include <linux/export.h> +#include <linux/module.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> @@ -274,7 +275,6 @@ int sst_dma_new(struct sst_dsp *sst) struct sst_pdata *sst_pdata = sst->pdata; struct sst_dma *dma; struct resource mem; - const char *dma_dev_name; int ret = 0; if (sst->pdata->resindex_dma_base == -1) @@ -285,7 +285,6 @@ int sst_dma_new(struct sst_dsp *sst) * is attached to the ADSP IP. */ switch (sst->pdata->dma_engine) { case SST_DMA_TYPE_DW: - dma_dev_name = "dw_dmac"; break; default: dev_err(sst->dev, "error: invalid DMA engine %d\n", diff --git a/sound/soc/intel/common/sst-match-acpi.c b/sound/soc/intel/common/sst-match-acpi.c deleted file mode 100644 index 56d26f36a3cb..000000000000 --- a/sound/soc/intel/common/sst-match-acpi.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * sst_match_apci.c - SST (LPE) match for ACPI enumeration. - * - * Copyright (c) 2013-15, Intel Corporation. - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include "sst-acpi.h" - -static acpi_status sst_acpi_find_name(acpi_handle handle, u32 level, - void *context, void **ret) -{ - struct acpi_device *adev; - const char *name = NULL; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (adev->status.present && adev->status.functional) { - name = acpi_dev_name(adev); - *(const char **)ret = name; - return AE_CTRL_TERMINATE; - } - - return AE_OK; -} - -const char *sst_acpi_find_name_from_hid(const u8 hid[ACPI_ID_LEN]) -{ - const char *name = NULL; - acpi_status status; - - status = acpi_get_devices(hid, sst_acpi_find_name, NULL, - (void **)&name); - - if (ACPI_FAILURE(status) || name[0] == '\0') - return NULL; - - return name; -} -EXPORT_SYMBOL_GPL(sst_acpi_find_name_from_hid); - -static acpi_status sst_acpi_mach_match(acpi_handle handle, u32 level, - void *context, void **ret) -{ - unsigned long long sta; - acpi_status status; - - *(bool *)context = true; - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_PRESENT)) - *(bool *)context = false; - - return AE_OK; -} - -bool sst_acpi_check_hid(const u8 hid[ACPI_ID_LEN]) -{ - acpi_status status; - bool found = false; - - status = acpi_get_devices(hid, sst_acpi_mach_match, &found, NULL); - - if (ACPI_FAILURE(status)) - return false; - - return found; -} -EXPORT_SYMBOL_GPL(sst_acpi_check_hid); - -struct sst_acpi_mach *sst_acpi_find_machine(struct sst_acpi_mach *machines) -{ - struct sst_acpi_mach *mach; - - for (mach = machines; mach->id[0]; mach++) { - if (sst_acpi_check_hid(mach->id) == true) { - if (mach->machine_quirk == NULL) - return mach; - - if (mach->machine_quirk(mach) != NULL) - return mach; - } - } - return NULL; -} -EXPORT_SYMBOL_GPL(sst_acpi_find_machine); - -static acpi_status sst_acpi_find_package(acpi_handle handle, u32 level, - void *context, void **ret) -{ - struct acpi_device *adev; - acpi_status status = AE_OK; - struct sst_acpi_package_context *pkg_ctx = context; - - pkg_ctx->data_valid = false; - - if (acpi_bus_get_device(handle, &adev)) - return AE_OK; - - if (adev->status.present && adev->status.functional) { - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *myobj = NULL; - - status = acpi_evaluate_object_typed(handle, pkg_ctx->name, - NULL, &buffer, - ACPI_TYPE_PACKAGE); - if (ACPI_FAILURE(status)) - return AE_OK; - - myobj = buffer.pointer; - if (!myobj || myobj->package.count != pkg_ctx->length) { - kfree(buffer.pointer); - return AE_OK; - } - - status = acpi_extract_package(myobj, - pkg_ctx->format, pkg_ctx->state); - if (ACPI_FAILURE(status)) { - kfree(buffer.pointer); - return AE_OK; - } - - kfree(buffer.pointer); - pkg_ctx->data_valid = true; - return AE_CTRL_TERMINATE; - } - - return AE_OK; -} - -bool sst_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN], - struct sst_acpi_package_context *ctx) -{ - acpi_status status; - - status = acpi_get_devices(hid, sst_acpi_find_package, ctx, NULL); - - if (ACPI_FAILURE(status) || !ctx->data_valid) - return false; - - return true; -} -EXPORT_SYMBOL_GPL(sst_acpi_find_package_from_hid); - -struct sst_acpi_mach *sst_acpi_codec_list(void *arg) -{ - struct sst_acpi_mach *mach = arg; - struct sst_codecs *codec_list = (struct sst_codecs *) mach->quirk_data; - int i; - - if (mach->quirk_data == NULL) - return mach; - - for (i = 0; i < codec_list->num_codecs; i++) { - if (sst_acpi_check_hid(codec_list->codecs[i]) != true) - return NULL; - } - - return mach; -} -EXPORT_SYMBOL_GPL(sst_acpi_codec_list); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Intel Common ACPI Match module"); diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index 89f70133c8e4..61b5bfa79d13 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -613,8 +613,10 @@ skip_buf_size_calc: } #define DMA_CONTROL_ID 5 +#define DMA_I2S_BLOB_SIZE 21 -int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig) +int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps, + u32 caps_size, u32 node_id) { struct skl_dma_control *dma_ctrl; struct skl_ipc_large_config_msg msg = {0}; @@ -624,24 +626,27 @@ int skl_dsp_set_dma_control(struct skl_sst *ctx, struct skl_module_cfg *mconfig) /* * if blob size zero, then return */ - if (mconfig->formats_config.caps_size == 0) + if (caps_size == 0) return 0; msg.large_param_id = DMA_CONTROL_ID; - msg.param_data_size = sizeof(struct skl_dma_control) + - mconfig->formats_config.caps_size; + msg.param_data_size = sizeof(struct skl_dma_control) + caps_size; dma_ctrl = kzalloc(msg.param_data_size, GFP_KERNEL); if (dma_ctrl == NULL) return -ENOMEM; - dma_ctrl->node_id = skl_get_node_id(ctx, mconfig); + dma_ctrl->node_id = node_id; - /* size in dwords */ - dma_ctrl->config_length = mconfig->formats_config.caps_size / 4; + /* + * NHLT blob may contain additional configs along with i2s blob. + * firmware expects only the i2s blob size as the config_length. + * So fix to i2s blob size. + * size in dwords. + */ + dma_ctrl->config_length = DMA_I2S_BLOB_SIZE; - memcpy(dma_ctrl->config_data, mconfig->formats_config.caps, - mconfig->formats_config.caps_size); + memcpy(dma_ctrl->config_data, caps, caps_size); err = skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)dma_ctrl); @@ -702,18 +707,11 @@ static void skl_set_updown_mixer_format(struct skl_sst *ctx, struct skl_module *module = mconfig->module; struct skl_module_iface *iface = &module->formats[mconfig->fmt_idx]; struct skl_module_fmt *fmt = &iface->outputs[0].fmt; - int i = 0; skl_set_base_module_format(ctx, mconfig, (struct skl_base_cfg *)mixer_mconfig); mixer_mconfig->out_ch_cfg = fmt->ch_cfg; - - /* Select F/W default coefficient */ - mixer_mconfig->coeff_sel = 0x0; - - /* User coeff, don't care since we are selecting F/W defaults */ - for (i = 0; i < UP_DOWN_MIXER_MAX_COEFF; i++) - mixer_mconfig->coeff[i] = 0xDEADBEEF; + mixer_mconfig->ch_map = fmt->ch_map; } /* diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index e7d766d56c8e..d14c50a60289 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -20,6 +20,8 @@ #include <linux/pci.h> #include "skl.h" +#define NHLT_ACPI_HEADER_SIG "NHLT" + /* Unique identification for getting NHLT blobs */ static guid_t osc_guid = GUID_INIT(0xA69F886E, 0x6CEB, 0x4594, @@ -45,6 +47,13 @@ struct nhlt_acpi_table *skl_nhlt_init(struct device *dev) memremap(nhlt_ptr->min_addr, nhlt_ptr->length, MEMREMAP_WB); ACPI_FREE(obj); + if (nhlt_table && (strncmp(nhlt_table->header.signature, + NHLT_ACPI_HEADER_SIG, + strlen(NHLT_ACPI_HEADER_SIG)) != 0)) { + memunmap(nhlt_table); + dev_err(dev, "NHLT ACPI header signature incorrect\n"); + return NULL; + } return nhlt_table; } diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index 2b1e513b1680..1dd97479e0c0 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -355,7 +355,8 @@ static void skl_pcm_close(struct snd_pcm_substream *substream, } mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream); - skl_tplg_d0i3_put(skl, mconfig->d0i3_caps); + if (mconfig) + skl_tplg_d0i3_put(skl, mconfig->d0i3_caps); kfree(dma_params); } @@ -652,7 +653,7 @@ static const struct snd_soc_dai_ops skl_link_dai_ops = { .trigger = skl_link_pcm_trigger, }; -static struct snd_soc_dai_driver skl_platform_dai[] = { +static struct snd_soc_dai_driver skl_fe_dai[] = { { .name = "System Pin", .ops = &skl_pcm_dai_ops, @@ -796,8 +797,10 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { .sig_bits = 32, }, }, +}; /* BE CPU Dais */ +static struct snd_soc_dai_driver skl_platform_dai[] = { { .name = "SSP0 Pin", .ops = &skl_be_ssp_dai_ops, @@ -975,6 +978,14 @@ static struct snd_soc_dai_driver skl_platform_dai[] = { }, }; +int skl_dai_load(struct snd_soc_component *cmp, + struct snd_soc_dai_driver *pcm_dai) +{ + pcm_dai->ops = &skl_pcm_dai_ops; + + return 0; +} + static int skl_platform_open(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; @@ -1362,6 +1373,8 @@ int skl_platform_register(struct device *dev) int ret; struct hdac_ext_bus *ebus = dev_get_drvdata(dev); struct skl *skl = ebus_to_skl(ebus); + struct snd_soc_dai_driver *dais; + int num_dais = ARRAY_SIZE(skl_platform_dai); INIT_LIST_HEAD(&skl->ppl_list); INIT_LIST_HEAD(&skl->bind_list); @@ -1371,14 +1384,38 @@ int skl_platform_register(struct device *dev) dev_err(dev, "soc platform registration failed %d\n", ret); return ret; } + + skl->dais = kmemdup(skl_platform_dai, sizeof(skl_platform_dai), + GFP_KERNEL); + if (!skl->dais) { + ret = -ENOMEM; + goto err; + } + + if (!skl->use_tplg_pcm) { + dais = krealloc(skl->dais, sizeof(skl_fe_dai) + + sizeof(skl_platform_dai), GFP_KERNEL); + if (!dais) { + ret = -ENOMEM; + goto err; + } + + skl->dais = dais; + memcpy(&skl->dais[ARRAY_SIZE(skl_platform_dai)], skl_fe_dai, + sizeof(skl_fe_dai)); + num_dais += ARRAY_SIZE(skl_fe_dai); + } + ret = snd_soc_register_component(dev, &skl_component, - skl_platform_dai, - ARRAY_SIZE(skl_platform_dai)); + skl->dais, num_dais); if (ret) { dev_err(dev, "soc component registration failed %d\n", ret); - snd_soc_unregister_platform(dev); + goto err; } + return 0; +err: + snd_soc_unregister_platform(dev); return ret; } @@ -1398,5 +1435,7 @@ int skl_platform_unregister(struct device *dev) snd_soc_unregister_component(dev); snd_soc_unregister_platform(dev); + kfree(skl->dais); + return 0; } diff --git a/sound/soc/intel/skylake/skl-sst-utils.c b/sound/soc/intel/skylake/skl-sst-utils.c index 369ef7ce981c..8ff89280d9fd 100644 --- a/sound/soc/intel/skylake/skl-sst-utils.c +++ b/sound/soc/intel/skylake/skl-sst-utils.c @@ -251,6 +251,7 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, struct uuid_module *module; struct firmware stripped_fw; unsigned int safe_file; + int ret = 0; /* Get the FW pointer to derive ADSP header */ stripped_fw.data = fw->data; @@ -299,8 +300,10 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, for (i = 0; i < num_entry; i++, mod_entry++) { module = kzalloc(sizeof(*module), GFP_KERNEL); - if (!module) - return -ENOMEM; + if (!module) { + ret = -ENOMEM; + goto free_uuid_list; + } uuid_bin = (uuid_le *)mod_entry->uuid.id; memcpy(&module->uuid, uuid_bin, sizeof(module->uuid)); @@ -311,8 +314,8 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, size = sizeof(int) * mod_entry->instance_max_count; module->instance_id = devm_kzalloc(ctx->dev, size, GFP_KERNEL); if (!module->instance_id) { - kfree(module); - return -ENOMEM; + ret = -ENOMEM; + goto free_uuid_list; } list_add_tail(&module->list, &skl->uuid_list); @@ -323,6 +326,10 @@ int snd_skl_parse_uuids(struct sst_dsp *ctx, const struct firmware *fw, } return 0; + +free_uuid_list: + skl_freeup_uuid_list(skl); + return ret; } void skl_freeup_uuid_list(struct skl_sst *ctx) diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 22f768ca3c73..a072bcf209d2 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -2036,21 +2036,45 @@ static int skl_tplg_add_pipe(struct device *dev, return 0; } -static int skl_tplg_fill_pin(struct device *dev, u32 tkn, +static int skl_tplg_get_uuid(struct device *dev, u8 *guid, + struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) +{ + if (uuid_tkn->token == SKL_TKN_UUID) { + memcpy(guid, &uuid_tkn->uuid, 16); + return 0; + } + + dev_err(dev, "Not an UUID token %d\n", uuid_tkn->token); + + return -EINVAL; +} + +static int skl_tplg_fill_pin(struct device *dev, + struct snd_soc_tplg_vendor_value_elem *tkn_elem, struct skl_module_pin *m_pin, - int pin_index, u32 value) + int pin_index) { - switch (tkn) { + int ret; + + switch (tkn_elem->token) { case SKL_TKN_U32_PIN_MOD_ID: - m_pin[pin_index].id.module_id = value; + m_pin[pin_index].id.module_id = tkn_elem->value; break; case SKL_TKN_U32_PIN_INST_ID: - m_pin[pin_index].id.instance_id = value; + m_pin[pin_index].id.instance_id = tkn_elem->value; + break; + + case SKL_TKN_UUID: + ret = skl_tplg_get_uuid(dev, m_pin[pin_index].id.mod_uuid.b, + (struct snd_soc_tplg_vendor_uuid_elem *)tkn_elem); + if (ret < 0) + return ret; + break; default: - dev_err(dev, "%d Not a pin token\n", value); + dev_err(dev, "%d Not a pin token\n", tkn_elem->token); return -EINVAL; } @@ -2083,9 +2107,7 @@ static int skl_tplg_fill_pins_info(struct device *dev, return -EINVAL; } - ret = skl_tplg_fill_pin(dev, tkn_elem->token, - m_pin, pin_count, tkn_elem->value); - + ret = skl_tplg_fill_pin(dev, tkn_elem, m_pin, pin_count); if (ret < 0) return ret; @@ -2170,19 +2192,6 @@ static int skl_tplg_widget_fill_fmt(struct device *dev, return skl_tplg_fill_fmt(dev, dst_fmt, tkn, val); } -static int skl_tplg_get_uuid(struct device *dev, struct skl_module_cfg *mconfig, - struct snd_soc_tplg_vendor_uuid_elem *uuid_tkn) -{ - if (uuid_tkn->token == SKL_TKN_UUID) - memcpy(&mconfig->guid, &uuid_tkn->uuid, 16); - else { - dev_err(dev, "Not an UUID token tkn %d\n", uuid_tkn->token); - return -EINVAL; - } - - return 0; -} - static void skl_tplg_fill_pin_dynamic_val( struct skl_module_pin *mpin, u32 pin_count, u32 value) { @@ -2382,7 +2391,7 @@ static int skl_tplg_get_token(struct device *dev, case SKL_TKN_U32_MAX_MCPS: case SKL_TKN_U32_OBS: case SKL_TKN_U32_IBS: - ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, dir, pin_index); + ret = skl_tplg_fill_res_tkn(dev, tkn_elem, res, pin_index, dir); if (ret < 0) return ret; @@ -2488,6 +2497,7 @@ static int skl_tplg_get_token(struct device *dev, case SKL_TKN_U32_PIN_MOD_ID: case SKL_TKN_U32_PIN_INST_ID: + case SKL_TKN_UUID: ret = skl_tplg_fill_pins_info(dev, mconfig, tkn_elem, dir, pin_index); @@ -2550,6 +2560,7 @@ static int skl_tplg_get_tokens(struct device *dev, struct snd_soc_tplg_vendor_value_elem *tkn_elem; int tkn_count = 0, ret; int off = 0, tuple_size = 0; + bool is_module_guid = true; if (block_size <= 0) return -EINVAL; @@ -2565,7 +2576,15 @@ static int skl_tplg_get_tokens(struct device *dev, continue; case SND_SOC_TPLG_TUPLE_TYPE_UUID: - ret = skl_tplg_get_uuid(dev, mconfig, array->uuid); + if (is_module_guid) { + ret = skl_tplg_get_uuid(dev, mconfig->guid, + array->uuid); + is_module_guid = false; + } else { + ret = skl_tplg_get_token(dev, array->value, skl, + mconfig); + } + if (ret < 0) return ret; @@ -3331,6 +3350,7 @@ static struct snd_soc_tplg_ops skl_tplg_ops = { .io_ops = skl_tplg_kcontrol_ops, .io_ops_count = ARRAY_SIZE(skl_tplg_kcontrol_ops), .manifest = skl_manifest_load, + .dai_load = skl_dai_load, }; /* @@ -3404,7 +3424,7 @@ int skl_tplg_init(struct snd_soc_platform *platform, struct hdac_ext_bus *ebus) ret = request_firmware(&fw, skl->tplg_name, bus->dev); if (ret < 0) { - dev_err(bus->dev, "tplg fw %s load failed with %d\n", + dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin", skl->tplg_name, ret); ret = request_firmware(&fw, "dfw_sst.bin", bus->dev); if (ret < 0) { diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h index 2717db92036b..b6496513fe55 100644 --- a/sound/soc/intel/skylake/skl-topology.h +++ b/sound/soc/intel/skylake/skl-topology.h @@ -34,7 +34,7 @@ #define MAX_FIXED_DMIC_PARAMS_SIZE 727 /* Maximum number of coefficients up down mixer module */ -#define UP_DOWN_MIXER_MAX_COEFF 6 +#define UP_DOWN_MIXER_MAX_COEFF 8 #define MODULE_MAX_IN_PINS 8 #define MODULE_MAX_OUT_PINS 8 @@ -161,6 +161,7 @@ struct skl_up_down_mixer_cfg { u32 coeff_sel; /* Pass the user coeff in this array */ s32 coeff[UP_DOWN_MIXER_MAX_COEFF]; + u32 ch_map; } __packed; struct skl_algo_cfg { @@ -455,8 +456,8 @@ static inline struct skl *get_skl_ctx(struct device *dev) int skl_tplg_be_update_params(struct snd_soc_dai *dai, struct skl_pipe_params *params); -int skl_dsp_set_dma_control(struct skl_sst *ctx, - struct skl_module_cfg *mconfig); +int skl_dsp_set_dma_control(struct skl_sst *ctx, u32 *caps, + u32 caps_size, u32 node_id); void skl_tplg_set_be_dmic_config(struct snd_soc_dai *dai, struct skl_pipe_params *params, int stream); int skl_tplg_init(struct snd_soc_platform *platform, @@ -501,4 +502,7 @@ int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params); int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params); + +int skl_dai_load(struct snd_soc_component *cmp, + struct snd_soc_dai_driver *pcm_dai); #endif diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index f94b484abb99..31d8634e8aa1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -28,7 +28,7 @@ #include <linux/firmware.h> #include <linux/delay.h> #include <sound/pcm.h> -#include "../common/sst-acpi.h" +#include <sound/soc-acpi.h> #include <sound/hda_register.h> #include <sound/hdaudio.h> #include <sound/hda_i915.h> @@ -439,10 +439,10 @@ static int skl_machine_device_register(struct skl *skl, void *driver_data) { struct hdac_bus *bus = ebus_to_hbus(&skl->ebus); struct platform_device *pdev; - struct sst_acpi_mach *mach = driver_data; + struct snd_soc_acpi_mach *mach = driver_data; int ret; - mach = sst_acpi_find_machine(mach); + mach = snd_soc_acpi_find_machine(mach); if (mach == NULL) { dev_err(bus->dev, "No matching machine driver found\n"); return -ENODEV; @@ -462,8 +462,11 @@ static int skl_machine_device_register(struct skl *skl, void *driver_data) return -EIO; } - if (mach->pdata) + if (mach->pdata) { + skl->use_tplg_pcm = + ((struct skl_machine_pdata *)mach->pdata)->use_tplg_pcm; dev_set_drvdata(&pdev->dev, mach->pdata); + } skl->i2s_dev = pdev; @@ -875,33 +878,36 @@ static void skl_remove(struct pci_dev *pci) dev_set_drvdata(&pci->dev, NULL); } -static struct sst_codecs skl_codecs = { +static struct snd_soc_acpi_codecs skl_codecs = { .num_codecs = 1, .codecs = {"10508825"} }; -static struct sst_codecs kbl_codecs = { +static struct snd_soc_acpi_codecs kbl_codecs = { .num_codecs = 1, .codecs = {"10508825"} }; -static struct sst_codecs bxt_codecs = { +static struct snd_soc_acpi_codecs bxt_codecs = { .num_codecs = 1, .codecs = {"MX98357A"} }; -static struct sst_codecs kbl_poppy_codecs = { +static struct snd_soc_acpi_codecs kbl_poppy_codecs = { .num_codecs = 1, .codecs = {"10EC5663"} }; -static struct sst_codecs kbl_5663_5514_codecs = { +static struct snd_soc_acpi_codecs kbl_5663_5514_codecs = { .num_codecs = 2, .codecs = {"10EC5663", "10EC5514"} }; +static struct skl_machine_pdata cnl_pdata = { + .use_tplg_pcm = true, +}; -static struct sst_acpi_mach sst_skl_devdata[] = { +static struct snd_soc_acpi_mach sst_skl_devdata[] = { { .id = "INT343A", .drv_name = "skl_alc286s_i2s", @@ -911,7 +917,7 @@ static struct sst_acpi_mach sst_skl_devdata[] = { .id = "INT343B", .drv_name = "skl_n88l25_s4567", .fw_filename = "intel/dsp_fw_release.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &skl_codecs, .pdata = &skl_dmic_data }, @@ -919,14 +925,14 @@ static struct sst_acpi_mach sst_skl_devdata[] = { .id = "MX98357A", .drv_name = "skl_n88l25_m98357a", .fw_filename = "intel/dsp_fw_release.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &skl_codecs, .pdata = &skl_dmic_data }, {} }; -static struct sst_acpi_mach sst_bxtp_devdata[] = { +static struct snd_soc_acpi_mach sst_bxtp_devdata[] = { { .id = "INT343A", .drv_name = "bxt_alc298s_i2s", @@ -936,13 +942,13 @@ static struct sst_acpi_mach sst_bxtp_devdata[] = { .id = "DLGS7219", .drv_name = "bxt_da7219_max98357a_i2s", .fw_filename = "intel/dsp_fw_bxtn.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &bxt_codecs, }, {} }; -static struct sst_acpi_mach sst_kbl_devdata[] = { +static struct snd_soc_acpi_mach sst_kbl_devdata[] = { { .id = "INT343A", .drv_name = "kbl_alc286s_i2s", @@ -952,7 +958,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "INT343B", .drv_name = "kbl_n88l25_s4567", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_codecs, .pdata = &skl_dmic_data }, @@ -960,7 +966,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "MX98357A", .drv_name = "kbl_n88l25_m98357a", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_codecs, .pdata = &skl_dmic_data }, @@ -968,7 +974,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "MX98927", .drv_name = "kbl_r5514_5663_max", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_5663_5514_codecs, .pdata = &skl_dmic_data }, @@ -976,7 +982,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { .id = "MX98927", .drv_name = "kbl_rt5663_m98927", .fw_filename = "intel/dsp_fw_kbl.bin", - .machine_quirk = sst_acpi_codec_list, + .machine_quirk = snd_soc_acpi_codec_list, .quirk_data = &kbl_poppy_codecs, .pdata = &skl_dmic_data }, @@ -989,7 +995,7 @@ static struct sst_acpi_mach sst_kbl_devdata[] = { {} }; -static struct sst_acpi_mach sst_glk_devdata[] = { +static struct snd_soc_acpi_mach sst_glk_devdata[] = { { .id = "INT343A", .drv_name = "glk_alc298s_i2s", @@ -998,12 +1004,14 @@ static struct sst_acpi_mach sst_glk_devdata[] = { {} }; -static const struct sst_acpi_mach sst_cnl_devdata[] = { +static const struct snd_soc_acpi_mach sst_cnl_devdata[] = { { .id = "INT34C2", .drv_name = "cnl_rt274", .fw_filename = "intel/dsp_fw_cnl.bin", + .pdata = &cnl_pdata, }, + {} }; /* PCI IDs */ diff --git a/sound/soc/intel/skylake/skl.h b/sound/soc/intel/skylake/skl.h index 8d9d6899f761..e00cde8200dd 100644 --- a/sound/soc/intel/skylake/skl.h +++ b/sound/soc/intel/skylake/skl.h @@ -53,6 +53,7 @@ struct skl { struct platform_device *dmic_dev; struct platform_device *i2s_dev; struct snd_soc_platform *platform; + struct snd_soc_dai_driver *dais; struct nhlt_acpi_table *nhlt; /* nhlt ptr */ struct skl_sst *skl_sst; /* sst skl ctx */ @@ -73,6 +74,7 @@ struct skl { struct skl_debug *debugfs; u8 nr_modules; struct skl_module **modules; + bool use_tplg_pcm; }; #define skl_to_ebus(s) (&(s)->ebus) @@ -85,9 +87,9 @@ struct skl_dma_params { u8 stream_tag; }; -/* to pass dmic data */ struct skl_machine_pdata { u32 dmic_num; + bool use_tplg_pcm; /* use dais and dai links from topology */ }; struct skl_dsp_ops { |