Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   - Gustavo A. R. Silva keeps working on the implicit switch fallthru
     changes.

   - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From
     Luca Coelho.

   - Re-enable ASPM in r8169, from Kai-Heng Feng.

   - Add virtual XFRM interfaces, which avoids all of the limitations of
     existing IPSEC tunnels. From Steffen Klassert.

   - Convert GRO over to use a hash table, so that when we have many
     flows active we don't traverse a long list during accumluation.

   - Many new self tests for routing, TC, tunnels, etc. Too many
     contributors to mention them all, but I'm really happy to keep
     seeing this stuff.

   - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu.

   - Lots of cleanups and fixes in L2TP code from Guillaume Nault.

   - Add IPSEC offload support to netdevsim, from Shannon Nelson.

   - Add support for slotting with non-uniform distribution to netem
     packet scheduler, from Yousuk Seung.

   - Add UDP GSO support to mlx5e, from Boris Pismenny.

   - Support offloading of Team LAG in NFP, from John Hurley.

   - Allow to configure TX queue selection based upon RX queue, from
     Amritha Nambiar.

   - Support ethtool ring size configuration in aquantia, from Anton
     Mikaev.

   - Support DSCP and flowlabel per-transport in SCTP, from Xin Long.

   - Support list based batching and stack traversal of SKBs, this is
     very exciting work. From Edward Cree.

   - Busyloop optimizations in vhost_net, from Toshiaki Makita.

   - Introduce the ETF qdisc, which allows time based transmissions. IGB
     can offload this in hardware. From Vinicius Costa Gomes.

   - Add parameter support to devlink, from Moshe Shemesh.

   - Several multiplication and division optimizations for BPF JIT in
     nfp driver, from Jiong Wang.

   - Lots of prepatory work to make more of the packet scheduler layer
     lockless, when possible, from Vlad Buslov.

   - Add ACK filter and NAT awareness to sch_cake packet scheduler, from
     Toke Høiland-Jørgensen.

   - Support regions and region snapshots in devlink, from Alex Vesker.

   - Allow to attach XDP programs to both HW and SW at the same time on
     a given device, with initial support in nfp. From Jakub Kicinski.

   - Add TLS RX offload and support in mlx5, from Ilya Lesokhin.

   - Use PHYLIB in r8169 driver, from Heiner Kallweit.

   - All sorts of changes to support Spectrum 2 in mlxsw driver, from
     Ido Schimmel.

   - PTP support in mv88e6xxx DSA driver, from Andrew Lunn.

   - Make TCP_USER_TIMEOUT socket option more accurate, from Jon
     Maxwell.

   - Support for templates in packet scheduler classifier, from Jiri
     Pirko.

   - IPV6 support in RDS, from Ka-Cheong Poon.

   - Native tproxy support in nf_tables, from Máté Eckl.

   - Maintain IP fragment queue in an rbtree, but optimize properly for
     in-order frags. From Peter Oskolkov.

   - Improvde handling of ACKs on hole repairs, from Yuchung Cheng"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits)
  bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT"
  hv/netvsc: Fix NULL dereference at single queue mode fallback
  net: filter: mark expected switch fall-through
  xen-netfront: fix warn message as irq device name has '/'
  cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0
  net: dsa: mv88e6xxx: missing unlock on error path
  rds: fix building with IPV6=m
  inet/connection_sock: prefer _THIS_IP_ to current_text_addr
  net: dsa: mv88e6xxx: bitwise vs logical bug
  net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd()
  ieee802154: hwsim: using right kind of iteration
  net: hns3: Add vlan filter setting by ethtool command -K
  net: hns3: Set tx ring' tc info when netdev is up
  net: hns3: Remove tx ring BD len register in hns3_enet
  net: hns3: Fix desc num set to default when setting channel
  net: hns3: Fix for phy link issue when using marvell phy driver
  net: hns3: Fix for information of phydev lost problem when down/up
  net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero
  net: hns3: Add support for serdes loopback selftest
  bnxt_en: take coredump_record structure off stack
  ...

1 files changed, 114 insertions, 20 deletions

diff --git a/tools/bpf/bpftool/bash-completion/bpftool b/tools/bpf/bpftool/bash-completion/bpftool
index 1e1083321643..598066c40191 100644
--- a/tools/bpf/bpftool/bash-completion/bpftool
+++ b/tools/bpf/bpftool/bash-completion/bpftool
@@ -99,6 +99,35 @@ _bpftool_get_prog_tags()
         command sed -n 's/.*"tag": "\(.*\)",$/\1/p' )" -- "$cur" ) )
 }
 
+_bpftool_get_obj_map_names()
+{
+    local obj
+
+    obj=$1
+
+    maps=$(objdump -j maps -t $obj 2>/dev/null | \
+        command awk '/g     . maps/ {print $NF}')
+
+    COMPREPLY+=( $( compgen -W "$maps" -- "$cur" ) )
+}
+
+_bpftool_get_obj_map_idxs()
+{
+    local obj
+
+    obj=$1
+
+    nmaps=$(objdump -j maps -t $obj 2>/dev/null | grep -c 'g     . maps')
+
+    COMPREPLY+=( $( compgen -W "$(seq 0 $((nmaps - 1)))" -- "$cur" ) )
+}
+
+_sysfs_get_netdevs()
+{
+    COMPREPLY+=( $( compgen -W "$( ls /sys/class/net 2>/dev/null )" -- \
+        "$cur" ) )
+}
+
 # For bpftool map update: retrieve type of the map to update.
 _bpftool_map_update_map_type()
 {
@@ -153,6 +182,13 @@ _bpftool()
     local cur prev words objword
     _init_completion || return
 
+    # Deal with options
+    if [[ ${words[cword]} == -* ]]; then
+        local c='--version --json --pretty --bpffs'
+        COMPREPLY=( $( compgen -W "$c" -- "$cur" ) )
+        return 0
+    fi
+
     # Deal with simplest keywords
     case $prev in
         help|hex|opcodes|visual)
@@ -172,20 +208,23 @@ _bpftool()
             ;;
     esac
 
-    # Search for object and command
-    local object command cmdword
-    for (( cmdword=1; cmdword < ${#words[@]}-1; cmdword++ )); do
-        [[ -n $object ]] && command=${words[cmdword]} && break
-        [[ ${words[cmdword]} != -* ]] && object=${words[cmdword]}
+    # Remove all options so completions don't have to deal with them.
+    local i
+    for (( i=1; i < ${#words[@]}; )); do
+        if [[ ${words[i]::1} == - ]]; then
+            words=( "${words[@]:0:i}" "${words[@]:i+1}" )
+            [[ $i -le $cword ]] && cword=$(( cword - 1 ))
+        else
+            i=$(( ++i ))
+        fi
     done
+    cur=${words[cword]}
+    prev=${words[cword - 1]}
+
+    local object=${words[1]} command=${words[2]}
 
-    if [[ -z $object ]]; then
+    if [[ -z $object || $cword -eq 1 ]]; then
         case $cur in
-            -*)
-                local c='--version --json --pretty'
-                COMPREPLY=( $( compgen -W "$c" -- "$cur" ) )
-                return 0
-                ;;
             *)
                 COMPREPLY=( $( compgen -W "$( bpftool help 2>&1 | \
                     command sed \
@@ -204,12 +243,14 @@ _bpftool()
     # Completion depends on object and command in use
     case $object in
         prog)
-            case $prev in
-                id)
-                    _bpftool_get_prog_ids
-                    return 0
-                    ;;
-            esac
+            if [[ $command != "load" ]]; then
+                case $prev in
+                    id)
+                        _bpftool_get_prog_ids
+                        return 0
+                        ;;
+                esac
+            fi
 
             local PROG_TYPE='id pinned tag'
             case $command in
@@ -252,8 +293,57 @@ _bpftool()
                     return 0
                     ;;
                 load)
-                    _filedir
-                    return 0
+                    local obj
+
+                    if [[ ${#words[@]} -lt 6 ]]; then
+                        _filedir
+                        return 0
+                    fi
+
+                    obj=${words[3]}
+
+                    if [[ ${words[-4]} == "map" ]]; then
+                        COMPREPLY=( $( compgen -W "id pinned" -- "$cur" ) )
+                        return 0
+                    fi
+                    if [[ ${words[-3]} == "map" ]]; then
+                        if [[ ${words[-2]} == "idx" ]]; then
+                            _bpftool_get_obj_map_idxs $obj
+                        elif [[ ${words[-2]} == "name" ]]; then
+                            _bpftool_get_obj_map_names $obj
+                        fi
+                        return 0
+                    fi
+                    if [[ ${words[-2]} == "map" ]]; then
+                        COMPREPLY=( $( compgen -W "idx name" -- "$cur" ) )
+                        return 0
+                    fi
+
+                    case $prev in
+                        type)
+                            COMPREPLY=( $( compgen -W "socket kprobe kretprobe classifier action tracepoint raw_tracepoint xdp perf_event cgroup/skb cgroup/sock cgroup/dev lwt_in lwt_out lwt_xmit lwt_seg6local sockops sk_skb sk_msg lirc_mode2 cgroup/bind4 cgroup/bind6 cgroup/connect4 cgroup/connect6 cgroup/sendmsg4 cgroup/sendmsg6 cgroup/post_bind4 cgroup/post_bind6" -- \
+                                                   "$cur" ) )
+                            return 0
+                            ;;
+                        id)
+                            _bpftool_get_map_ids
+                            return 0
+                            ;;
+                        pinned)
+                            _filedir
+                            return 0
+                            ;;
+                        dev)
+                            _sysfs_get_netdevs
+                            return 0
+                            ;;
+                        *)
+                            COMPREPLY=( $( compgen -W "map" -- "$cur" ) )
+                            _bpftool_once_attr 'type'
+                            _bpftool_once_attr 'dev'
+                            return 0
+                            ;;
+                    esac
                     ;;
                 *)
                     [[ $prev == $object ]] && \
@@ -404,6 +494,10 @@ _bpftool()
                     _filedir
                     return 0
                     ;;
+		tree)
+		    _filedir
+		    return 0
+		    ;;
                 attach|detach)
                     local ATTACH_TYPES='ingress egress sock_create sock_ops \
                         device bind4 bind6 post_bind4 post_bind6 connect4 \
@@ -445,7 +539,7 @@ _bpftool()
                 *)
                     [[ $prev == $object ]] && \
                         COMPREPLY=( $( compgen -W 'help attach detach \
-                            show list' -- "$cur" ) )
+                            show list tree' -- "$cur" ) )
                     ;;
             esac
             ;;