Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for ->xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...

1 files changed, 359 insertions, 18 deletions

diff --git a/tools/testing/selftests/net/pmtu.sh b/tools/testing/selftests/net/pmtu.sh
index a369d616b390..e2c94e47707c 100755
--- a/tools/testing/selftests/net/pmtu.sh
+++ b/tools/testing/selftests/net/pmtu.sh
@@ -26,6 +26,47 @@
 # - pmtu_ipv6
 #	Same as pmtu_ipv4, except for locked PMTU tests, using IPv6
 #
+# - pmtu_ipv4_vxlan4_exception
+#	Set up the same network topology as pmtu_ipv4, create a VXLAN tunnel
+#	over IPv4 between A and B, routed via R1. On the link between R1 and B,
+#	set a MTU lower than the VXLAN MTU and the MTU on the link between A and
+#	R1. Send IPv4 packets, exceeding the MTU between R1 and B, over VXLAN
+#	from A to B and check that the PMTU exception is created with the right
+#	value on A
+#
+# - pmtu_ipv6_vxlan4_exception
+#	Same as pmtu_ipv4_vxlan4_exception, but send IPv6 packets from A to B
+#
+# - pmtu_ipv4_vxlan6_exception
+#	Same as pmtu_ipv4_vxlan4_exception, but use IPv6 transport from A to B
+#
+# - pmtu_ipv6_vxlan6_exception
+#	Same as pmtu_ipv4_vxlan6_exception, but send IPv6 packets from A to B
+#
+# - pmtu_ipv4_geneve4_exception
+#	Same as pmtu_ipv4_vxlan4_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv6_geneve4_exception
+#	Same as pmtu_ipv6_vxlan4_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv4_geneve6_exception
+#	Same as pmtu_ipv4_vxlan6_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv6_geneve6_exception
+#	Same as pmtu_ipv6_vxlan6_exception, but using a GENEVE tunnel instead of
+#	VXLAN
+#
+# - pmtu_ipv{4,6}_fou{4,6}_exception
+#	Same as pmtu_ipv4_vxlan4, but using a direct IPv4/IPv6 encapsulation
+#	(FoU) over IPv4/IPv6, instead of VXLAN
+#
+# - pmtu_ipv{4,6}_fou{4,6}_exception
+#	Same as pmtu_ipv4_vxlan4, but using a generic UDP IPv4/IPv6
+#	encapsulation (GUE) over IPv4/IPv6, instead of VXLAN
+#
 # - pmtu_vti4_exception
 #	Set up vti tunnel on top of veth, with xfrm states and policies, in two
 #	namespaces with matching endpoints. Check that route exception is not
@@ -72,6 +113,22 @@ which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping)
 tests="
 	pmtu_ipv4_exception		ipv4: PMTU exceptions
 	pmtu_ipv6_exception		ipv6: PMTU exceptions
+	pmtu_ipv4_vxlan4_exception	IPv4 over vxlan4: PMTU exceptions
+	pmtu_ipv6_vxlan4_exception	IPv6 over vxlan4: PMTU exceptions
+	pmtu_ipv4_vxlan6_exception	IPv4 over vxlan6: PMTU exceptions
+	pmtu_ipv6_vxlan6_exception	IPv6 over vxlan6: PMTU exceptions
+	pmtu_ipv4_geneve4_exception	IPv4 over geneve4: PMTU exceptions
+	pmtu_ipv6_geneve4_exception	IPv6 over geneve4: PMTU exceptions
+	pmtu_ipv4_geneve6_exception	IPv4 over geneve6: PMTU exceptions
+	pmtu_ipv6_geneve6_exception	IPv6 over geneve6: PMTU exceptions
+	pmtu_ipv4_fou4_exception	IPv4 over fou4: PMTU exceptions
+	pmtu_ipv6_fou4_exception	IPv6 over fou4: PMTU exceptions
+	pmtu_ipv4_fou6_exception	IPv4 over fou6: PMTU exceptions
+	pmtu_ipv6_fou6_exception	IPv6 over fou6: PMTU exceptions
+	pmtu_ipv4_gue4_exception	IPv4 over gue4: PMTU exceptions
+	pmtu_ipv6_gue4_exception	IPv6 over gue4: PMTU exceptions
+	pmtu_ipv4_gue6_exception	IPv4 over gue6: PMTU exceptions
+	pmtu_ipv6_gue6_exception	IPv6 over gue6: PMTU exceptions
 	pmtu_vti6_exception		vti6: PMTU exceptions
 	pmtu_vti4_exception		vti4: PMTU exceptions
 	pmtu_vti4_default_mtu		vti4: default MTU assignment
@@ -95,8 +152,8 @@ ns_r2="ip netns exec ${NS_R2}"
 # Addresses are:
 # - IPv4: PREFIX4.SEGMENT.ID (/24)
 # - IPv6: PREFIX6:SEGMENT::ID (/64)
-prefix4="192.168"
-prefix6="fd00"
+prefix4="10.0"
+prefix6="fc00"
 a_r1=1
 a_r2=2
 b_r1=3
@@ -129,12 +186,12 @@ veth6_a_addr="fd00:1::a"
 veth6_b_addr="fd00:1::b"
 veth6_mask="64"
 
-vti4_a_addr="192.168.2.1"
-vti4_b_addr="192.168.2.2"
-vti4_mask="24"
-vti6_a_addr="fd00:2::a"
-vti6_b_addr="fd00:2::b"
-vti6_mask="64"
+tunnel4_a_addr="192.168.2.1"
+tunnel4_b_addr="192.168.2.2"
+tunnel4_mask="24"
+tunnel6_a_addr="fd00:2::a"
+tunnel6_b_addr="fd00:2::b"
+tunnel6_mask="64"
 
 dummy6_0_addr="fc00:1000::0"
 dummy6_1_addr="fc00:1001::0"
@@ -159,6 +216,89 @@ nsname() {
 	eval echo \$NS_$1
 }
 
+setup_fou_or_gue() {
+	outer="${1}"
+	inner="${2}"
+	encap="${3}"
+
+	if [ "${outer}" = "4" ]; then
+		modprobe fou || return 2
+		a_addr="${prefix4}.${a_r1}.1"
+		b_addr="${prefix4}.${b_r1}.1"
+		if [ "${inner}" = "4" ]; then
+			type="ipip"
+			ipproto="4"
+		else
+			type="sit"
+			ipproto="41"
+		fi
+	else
+		modprobe fou6 || return 2
+		a_addr="${prefix6}:${a_r1}::1"
+		b_addr="${prefix6}:${b_r1}::1"
+		if [ "${inner}" = "4" ]; then
+			type="ip6tnl"
+			mode="mode ipip6"
+			ipproto="4 -6"
+		else
+			type="ip6tnl"
+			mode="mode ip6ip6"
+			ipproto="41 -6"
+		fi
+	fi
+
+	${ns_a} ip fou add port 5555 ipproto ${ipproto} || return 2
+	${ns_a} ip link add ${encap}_a type ${type} ${mode} local ${a_addr} remote ${b_addr} encap ${encap} encap-sport auto encap-dport 5556 || return 2
+
+	${ns_b} ip fou add port 5556 ipproto ${ipproto}
+	${ns_b} ip link add ${encap}_b type ${type} ${mode} local ${b_addr} remote ${a_addr} encap ${encap} encap-sport auto encap-dport 5555
+
+	if [ "${inner}" = "4" ]; then
+		${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${encap}_a
+		${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${encap}_b
+	else
+		${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${encap}_a
+		${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${encap}_b
+	fi
+
+	${ns_a} ip link set ${encap}_a up
+	${ns_b} ip link set ${encap}_b up
+
+	sleep 1
+}
+
+setup_fou44() {
+	setup_fou_or_gue 4 4 fou
+}
+
+setup_fou46() {
+	setup_fou_or_gue 4 6 fou
+}
+
+setup_fou64() {
+	setup_fou_or_gue 6 4 fou
+}
+
+setup_fou66() {
+	setup_fou_or_gue 6 6 fou
+}
+
+setup_gue44() {
+	setup_fou_or_gue 4 4 gue
+}
+
+setup_gue46() {
+	setup_fou_or_gue 4 6 gue
+}
+
+setup_gue64() {
+	setup_fou_or_gue 6 4 gue
+}
+
+setup_gue66() {
+	setup_fou_or_gue 6 6 gue
+}
+
 setup_namespaces() {
 	for n in ${NS_A} ${NS_B} ${NS_R1} ${NS_R2}; do
 		ip netns add ${n} || return 1
@@ -202,11 +342,57 @@ setup_vti() {
 }
 
 setup_vti4() {
-	setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${vti4_a_addr} ${vti4_b_addr} ${vti4_mask}
+	setup_vti 4 ${veth4_a_addr} ${veth4_b_addr} ${tunnel4_a_addr} ${tunnel4_b_addr} ${tunnel4_mask}
 }
 
 setup_vti6() {
-	setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${vti6_a_addr} ${vti6_b_addr} ${vti6_mask}
+	setup_vti 6 ${veth6_a_addr} ${veth6_b_addr} ${tunnel6_a_addr} ${tunnel6_b_addr} ${tunnel6_mask}
+}
+
+setup_vxlan_or_geneve() {
+	type="${1}"
+	a_addr="${2}"
+	b_addr="${3}"
+	opts="${4}"
+
+	if [ "${type}" = "vxlan" ]; then
+		opts="${opts} ttl 64 dstport 4789"
+		opts_a="local ${a_addr}"
+		opts_b="local ${b_addr}"
+	else
+		opts_a=""
+		opts_b=""
+	fi
+
+	${ns_a} ip link add ${type}_a type ${type} id 1 ${opts_a} remote ${b_addr} ${opts} || return 1
+	${ns_b} ip link add ${type}_b type ${type} id 1 ${opts_b} remote ${a_addr} ${opts}
+
+	${ns_a} ip addr add ${tunnel4_a_addr}/${tunnel4_mask} dev ${type}_a
+	${ns_b} ip addr add ${tunnel4_b_addr}/${tunnel4_mask} dev ${type}_b
+
+	${ns_a} ip addr add ${tunnel6_a_addr}/${tunnel6_mask} dev ${type}_a
+	${ns_b} ip addr add ${tunnel6_b_addr}/${tunnel6_mask} dev ${type}_b
+
+	${ns_a} ip link set ${type}_a up
+	${ns_b} ip link set ${type}_b up
+
+	sleep 1
+}
+
+setup_geneve4() {
+	setup_vxlan_or_geneve geneve ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1  "df set"
+}
+
+setup_vxlan4() {
+	setup_vxlan_or_geneve vxlan  ${prefix4}.${a_r1}.1  ${prefix4}.${b_r1}.1  "df set"
+}
+
+setup_geneve6() {
+	setup_vxlan_or_geneve geneve ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
+}
+
+setup_vxlan6() {
+	setup_vxlan_or_geneve vxlan  ${prefix6}:${a_r1}::1 ${prefix6}:${b_r1}::1
 }
 
 setup_xfrm() {
@@ -465,6 +651,161 @@ test_pmtu_ipv6_exception() {
 	test_pmtu_ipvX 6
 }
 
+test_pmtu_ipvX_over_vxlanY_or_geneveY_exception() {
+	type=${1}
+	family=${2}
+	outer_family=${3}
+	ll_mtu=4000
+
+	if [ ${outer_family} -eq 4 ]; then
+		setup namespaces routing ${type}4 || return 2
+		#                      IPv4 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 20          - 8          - 8                   - 14))
+	else
+		setup namespaces routing ${type}6 || return 2
+		#                      IPv6 header   UDP header   VXLAN/GENEVE header   Ethernet header
+		exp_mtu=$((${ll_mtu} - 40          - 8          - 8                   - 14))
+	fi
+
+	trace "${ns_a}" ${type}_a    "${ns_b}"  ${type}_b \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	if [ ${family} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ${type}_a $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${type}_b $((${ll_mtu} + 1000))
+	${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${type} interface"
+}
+
+test_pmtu_ipv4_vxlan4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  4 4
+}
+
+test_pmtu_ipv6_vxlan4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  6 4
+}
+
+test_pmtu_ipv4_geneve4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 4
+}
+
+test_pmtu_ipv6_geneve4_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 4
+}
+
+test_pmtu_ipv4_vxlan6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  4 6
+}
+
+test_pmtu_ipv6_vxlan6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception vxlan  6 6
+}
+
+test_pmtu_ipv4_geneve6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 4 6
+}
+
+test_pmtu_ipv6_geneve6_exception() {
+	test_pmtu_ipvX_over_vxlanY_or_geneveY_exception geneve 6 6
+}
+
+test_pmtu_ipvX_over_fouY_or_gueY() {
+	inner_family=${1}
+	outer_family=${2}
+	encap=${3}
+	ll_mtu=4000
+
+	setup namespaces routing ${encap}${outer_family}${inner_family} || return 2
+	trace "${ns_a}" ${encap}_a   "${ns_b}"  ${encap}_b \
+	      "${ns_a}" veth_A-R1    "${ns_r1}" veth_R1-A \
+	      "${ns_b}" veth_B-R1    "${ns_r1}" veth_R1-B
+
+	if [ ${inner_family} -eq 4 ]; then
+		ping=ping
+		dst=${tunnel4_b_addr}
+	else
+		ping=${ping6}
+		dst=${tunnel6_b_addr}
+	fi
+
+	if [ "${encap}" = "gue" ]; then
+		encap_overhead=4
+	else
+		encap_overhead=0
+	fi
+
+	if [ ${outer_family} -eq 4 ]; then
+		#                      IPv4 header   UDP header
+		exp_mtu=$((${ll_mtu} - 20          - 8         - ${encap_overhead}))
+	else
+		#                      IPv6 header   Option 4   UDP header
+		exp_mtu=$((${ll_mtu} - 40          - 8        - 8       - ${encap_overhead}))
+	fi
+
+	# Create route exception by exceeding link layer MTU
+	mtu "${ns_a}"  veth_A-R1 $((${ll_mtu} + 1000))
+	mtu "${ns_r1}" veth_R1-A $((${ll_mtu} + 1000))
+	mtu "${ns_b}"  veth_B-R1 ${ll_mtu}
+	mtu "${ns_r1}" veth_R1-B ${ll_mtu}
+
+	mtu "${ns_a}" ${encap}_a $((${ll_mtu} + 1000))
+	mtu "${ns_b}" ${encap}_b $((${ll_mtu} + 1000))
+	${ns_a} ${ping} -q -M want -i 0.1 -w 2 -s $((${ll_mtu} + 500)) ${dst} > /dev/null
+
+	# Check that exception was created
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${dst})"
+	check_pmtu_value ${exp_mtu} "${pmtu}" "exceeding link layer MTU on ${encap} interface"
+}
+
+test_pmtu_ipv4_fou4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 4 fou
+}
+
+test_pmtu_ipv6_fou4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 4 fou
+}
+
+test_pmtu_ipv4_fou6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 6 fou
+}
+
+test_pmtu_ipv6_fou6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 6 fou
+}
+
+test_pmtu_ipv4_gue4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 4 gue
+}
+
+test_pmtu_ipv6_gue4_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 4 gue
+}
+
+test_pmtu_ipv4_gue6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 4 6 gue
+}
+
+test_pmtu_ipv6_gue6_exception() {
+	test_pmtu_ipvX_over_fouY_or_gueY 6 6 gue
+}
+
 test_pmtu_vti4_exception() {
 	setup namespaces veth vti4 xfrm4 || return 2
 	trace "${ns_a}" veth_a    "${ns_b}" veth_b \
@@ -484,14 +825,14 @@ test_pmtu_vti4_exception() {
 
 	# Send DF packet without exceeding link layer MTU, check that no
 	# exception is created
-	${ns_a} ping -q -M want -i 0.1 -w 2 -s ${ping_payload} ${vti4_b_addr} > /dev/null
-	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti4_b_addr})"
+	${ns_a} ping -q -M want -i 0.1 -w 2 -s ${ping_payload} ${tunnel4_b_addr} > /dev/null
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
 	check_pmtu_value "" "${pmtu}" "sending packet smaller than PMTU (IP payload length ${esp_payload_rfc4106})" || return 1
 
 	# Now exceed link layer MTU by one byte, check that exception is created
 	# with the right PMTU value
-	${ns_a} ping -q -M want -i 0.1 -w 2 -s $((ping_payload + 1)) ${vti4_b_addr} > /dev/null
-	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti4_b_addr})"
+	${ns_a} ping -q -M want -i 0.1 -w 2 -s $((ping_payload + 1)) ${tunnel4_b_addr} > /dev/null
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel4_b_addr})"
 	check_pmtu_value "${esp_payload_rfc4106}" "${pmtu}" "exceeding PMTU (IP payload length $((esp_payload_rfc4106 + 1)))"
 }
 
@@ -506,20 +847,20 @@ test_pmtu_vti6_exception() {
 	mtu "${ns_b}" veth_b 4000
 	mtu "${ns_a}" vti6_a 5000
 	mtu "${ns_b}" vti6_b 5000
-	${ns_a} ${ping6} -q -i 0.1 -w 2 -s 60000 ${vti6_b_addr} > /dev/null
+	${ns_a} ${ping6} -q -i 0.1 -w 2 -s 60000 ${tunnel6_b_addr} > /dev/null
 
 	# Check that exception was created
-	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})"
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
 	check_pmtu_value any "${pmtu}" "creating tunnel exceeding link layer MTU" || return 1
 
 	# Decrease tunnel MTU, check for PMTU decrease in route exception
 	mtu "${ns_a}" vti6_a 3000
-	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})"
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
 	check_pmtu_value "3000" "${pmtu}" "decreasing tunnel MTU" || fail=1
 
 	# Increase tunnel MTU, check for PMTU increase in route exception
 	mtu "${ns_a}" vti6_a 9000
-	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${vti6_b_addr})"
+	pmtu="$(route_get_dst_pmtu_from_exception "${ns_a}" ${tunnel6_b_addr})"
 	check_pmtu_value "9000" "${pmtu}" "increasing tunnel MTU" || fail=1
 
 	return ${fail}