Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights:

   1) Maintain the TCP retransmit queue using an rbtree, with 1GB
      windows at 100Gb this really has become necessary. From Eric
      Dumazet.

   2) Multi-program support for cgroup+bpf, from Alexei Starovoitov.

   3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew
      Lunn.

   4) Add meter action support to openvswitch, from Andy Zhou.

   5) Add a data meta pointer for BPF accessible packets, from Daniel
      Borkmann.

   6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet.

   7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli.

   8) More work to move the RTNL mutex down, from Florian Westphal.

   9) Add 'bpftool' utility, to help with bpf program introspection.
      From Jakub Kicinski.

  10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper
      Dangaard Brouer.

  11) Support 'blocks' of transformations in the packet scheduler which
      can span multiple network devices, from Jiri Pirko.

  12) TC flower offload support in cxgb4, from Kumar Sanghvi.

  13) Priority based stream scheduler for SCTP, from Marcelo Ricardo
      Leitner.

  14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg.

  15) Add RED qdisc offloadability, and use it in mlxsw driver. From
      Nogah Frankel.

  16) eBPF based device controller for cgroup v2, from Roman Gushchin.

  17) Add some fundamental tracepoints for TCP, from Song Liu.

  18) Remove garbage collection from ipv6 route layer, this is a
      significant accomplishment. From Wei Wang.

  19) Add multicast route offload support to mlxsw, from Yotam Gigi"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits)
  tcp: highest_sack fix
  geneve: fix fill_info when link down
  bpf: fix lockdep splat
  net: cdc_ncm: GetNtbFormat endian fix
  openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start
  netem: remove unnecessary 64 bit modulus
  netem: use 64 bit divide by rate
  tcp: Namespace-ify sysctl_tcp_default_congestion_control
  net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()
  ipv6: set all.accept_dad to 0 by default
  uapi: fix linux/tls.h userspace compilation error
  usbnet: ipheth: prevent TX queue timeouts when device not ready
  vhost_net: conditionally enable tx polling
  uapi: fix linux/rxrpc.h userspace compilation errors
  net: stmmac: fix LPI transitioning for dwmac4
  atm: horizon: Fix irq release error
  net-sysfs: trigger netlink notification on ifalias change via sysfs
  openvswitch: Using kfree_rcu() to simplify the code
  openvswitch: Make local function ovs_nsh_key_attr_size() static
  openvswitch: Fix return value check in ovs_meter_cmd_features()
  ...

3 files changed, 80 insertions, 2 deletions

diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
index 4e09257bc443..00438331ba47 100644
--- a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
+++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
@@ -34,6 +34,12 @@ category:     A list of single-word descriptions covering what the command
 setup:        The list of commands required to ensure the command under test
               succeeds. For example: if testing a filter, the command to create
               the qdisc would appear here.
+	      This list can be empty.
+	      Each command can be a string to be executed, or a list consisting
+	      of a string which is a command to be executed, followed by 1 or
+	      more acceptable exit codes for this command.
+	      If only a string is given for the command, then an exit code of 0
+	      will be expected.
 cmdUnderTest: The tc command being tested itself.
 expExitCode:  The code returned by the command under test upon its termination.
               tdc will compare this value against the actual returned value.
@@ -49,6 +55,12 @@ matchCount:   How many times the regex in matchPattern should match. A value
 teardown:     The list of commands to clean up after the test is completed.
               The environment should be returned to the same state as when
               this test was started: qdiscs deleted, actions flushed, etc.
+	      This list can be empty.
+	      Each command can be a string to be executed, or a list consisting
+	      of a string which is a command to be executed, followed by 1 or
+	      more acceptable exit codes for this command.
+	      If only a string is given for the command, then an exit code of 0
+	      will be expected.
 
 
 SETUP/TEARDOWN ERRORS
diff --git a/tools/testing/selftests/tc-testing/creating-testcases/example.json b/tools/testing/selftests/tc-testing/creating-testcases/example.json
new file mode 100644
index 000000000000..5ec501200970
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/creating-testcases/example.json
@@ -0,0 +1,55 @@
+[
+    {
+        "id": "1f",
+        "name": "simple test to test framework",
+        "category": [
+            "example"
+        ],
+        "setup": [
+            "mkdir mytest"
+        ],
+        "cmdUnderTest": "touch mytest/blorfl",
+        "expExitCode": "0",
+        "verifyCmd": "ls mytest/* | grep '[b]lorfl'",
+        "matchPattern": "orfl",
+        "matchCount": "1",
+        "teardown": [
+            "rm -rf mytest"
+        ]
+    },
+    {
+        "id": "2f",
+        "name": "simple test, no need for verify",
+        "category": [
+            "example"
+        ],
+        "setup": [
+            "mkdir mytest",
+            "touch mytest/blorfl"
+        ],
+        "cmdUnderTest": "ls mytest/blorfl",
+        "expExitCode": "0",
+        "verifyCmd": "/bin/true",
+        "matchPattern": " ",
+        "matchCount": "0",
+        "teardown": [
+            "rm -rf mytest"
+        ]
+    },
+    {
+        "id": "3f",
+        "name": "simple test, no need for setup or teardown (or verify)",
+        "category": [
+            "example"
+        ],
+        "setup": [
+        ],
+        "cmdUnderTest": "ip l l lo",
+        "expExitCode": "0",
+        "verifyCmd": "/bin/true",
+        "matchPattern": " ",
+        "matchCount": "0",
+        "teardown": [
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/creating-testcases/template.json b/tools/testing/selftests/tc-testing/creating-testcases/template.json
index 87971744bdd4..8b99b86d65bd 100644
--- a/tools/testing/selftests/tc-testing/creating-testcases/template.json
+++ b/tools/testing/selftests/tc-testing/creating-testcases/template.json
@@ -26,7 +26,13 @@
             ""
         ],
         "setup": [
-            ""
+            "",
+	    [
+		"",
+		0,
+		1,
+		255
+	    ]
         ],
         "cmdUnderTest": "",
         "expExitCode": "",
@@ -34,7 +40,12 @@
         "matchPattern": "",
         "matchCount": "",
         "teardown": [
-            ""
+            "",
+	    [
+		"",
+		0,
+		255
+            ]
         ]
     }
 ]