diff options
195 files changed, 3998 insertions, 3205 deletions
diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt index a16e8d7fe56c..8cc0ab41578c 100644 --- a/Documentation/devicetree/bindings/mips/ralink.txt +++ b/Documentation/devicetree/bindings/mips/ralink.txt @@ -16,3 +16,17 @@ value must be one of the following values: ralink,mt7620a-soc ralink,mt7620n-soc ralink,mt7628a-soc + ralink,mt7688a-soc + +2. Boards + +GARDENA smart Gateway (MT7688) + +This board is based on the MediaTek MT7688 and equipped with 128 MiB +of DDR and 8 MiB of flash (SPI NOR) and additional 128MiB SPI NAND +storage. + +------------------------------ +Required root node properties: +- compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc", + "ralink,mt7628a-soc"; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 967e78c5ec0a..05b3904a995b 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -343,6 +343,8 @@ patternProperties: description: Freescale Semiconductor "^fujitsu,.*": description: Fujitsu Ltd. + "^gardena,.*": + description: GARDENA GmbH "^gateworks,.*": description: Gateworks Corporation "^gcw,.*": diff --git a/Documentation/driver-api/nvmem.rst b/Documentation/driver-api/nvmem.rst index d9d958d5c824..287e86819640 100644 --- a/Documentation/driver-api/nvmem.rst +++ b/Documentation/driver-api/nvmem.rst @@ -129,6 +129,8 @@ To facilitate such consumers NVMEM framework provides below apis:: struct nvmem_device *nvmem_device_get(struct device *dev, const char *name); struct nvmem_device *devm_nvmem_device_get(struct device *dev, const char *name); + struct nvmem_device *nvmem_device_find(void *data, + int (*match)(struct device *dev, const void *data)); void nvmem_device_put(struct nvmem_device *nvmem); int nvmem_device_read(struct nvmem_device *nvmem, unsigned int offset, size_t bytes, void *buf); diff --git a/MAINTAINERS b/MAINTAINERS index 6c4dc607074a..63c8ddc299bf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10868,18 +10868,18 @@ F: arch/mips/include/asm/mach-loongson32/ F: drivers/*/*loongson1* F: drivers/*/*/*loongson1* -MIPS/LOONGSON2 ARCHITECTURE +MIPS/LOONGSON2EF ARCHITECTURE M: Jiaxun Yang <jiaxun.yang@flygoat.com> L: linux-mips@vger.kernel.org S: Maintained -F: arch/mips/loongson64/fuloong-2e/ -F: arch/mips/loongson64/lemote-2f/ -F: arch/mips/include/asm/mach-loongson64/ +F: arch/mips/loongson2ef/ +F: arch/mips/include/asm/mach-loongson2ef/ F: drivers/*/*loongson2* F: drivers/*/*/*loongson2* -MIPS/LOONGSON3 ARCHITECTURE +MIPS/LOONGSON64 ARCHITECTURE M: Huacai Chen <chenhc@lemote.com> +M: Jiaxun Yang <jiaxun.yang@flygoat.com> L: linux-mips@vger.kernel.org S: Maintained F: arch/mips/loongson64/ diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms index 0de839882106..7c0d461483ef 100644 --- a/arch/mips/Kbuild.platforms +++ b/arch/mips/Kbuild.platforms @@ -17,6 +17,7 @@ platforms += jazz platforms += jz4740 platforms += lantiq platforms += lasat +platforms += loongson2ef platforms += loongson32 platforms += loongson64 platforms += mti-malta diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a0bd9bdb5f83..b303b5c2d764 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -7,6 +7,7 @@ config MIPS select ARCH_CLOCKSOURCE_DATA select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST select ARCH_HAS_UBSAN_SANITIZE_ALL + select ARCH_HAS_FORTIFY_SOURCE select ARCH_SUPPORTS_UPROBES select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF if 64BIT @@ -359,6 +360,8 @@ config MACH_DECSTATION config MACH_JAZZ bool "Jazz family of machines" + select ARC_MEMORY + select ARC_PROMLIB select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO select FW_ARC @@ -450,18 +453,44 @@ config MACH_LOONGSON32 the Institute of Computing Technology (ICT), Chinese Academy of Sciences (CAS). -config MACH_LOONGSON64 - bool "Loongson-2/3 family of machines" +config MACH_LOONGSON2EF + bool "Loongson-2E/F family of machines" select SYS_SUPPORTS_ZBOOT help - This enables the support of Loongson-2/3 family of machines. + This enables the support of early Loongson-2E/F family of machines. - Loongson-2 is a family of single-core CPUs and Loongson-3 is a - family of multi-core CPUs. They are both 64-bit general-purpose - MIPS-compatible CPUs. Loongson-2/3 are developed by the Institute - of Computing Technology (ICT), Chinese Academy of Sciences (CAS) - in the People's Republic of China. The chief architect is Professor - Weiwu Hu. +config MACH_LOONGSON64 + bool "Loongson-2/3 GSx64 family of machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select BOOT_ELF32 + select BOARD_SCACHE + select CSRC_R4K + select CEVT_R4K + select CPU_HAS_WB + select FORCE_PCI + select ISA + select I8259 + select IRQ_MIPS_CPU + select NR_CPUS_DEFAULT_4 + select USE_GENERIC_EARLY_PRINTK_8250 + select SYS_HAS_CPU_LOONGSON64 + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_HOTPLUG_CPU + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_ZBOOT + select LOONGSON_MC146818 + select ZONE_DMA32 + select NUMA + help + This enables the support of Loongson-2/3 family of processors with + GSx64 microarchitecture. config MACH_PISTACHIO bool "IMG Pistachio SoC based boards" @@ -631,6 +660,8 @@ config RALINK config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" + select ARC_MEMORY + select ARC_PROMLIB select FW_ARC select FW_ARC32 select ARCH_MIGHT_HAVE_PC_SERIO @@ -654,14 +685,7 @@ config SGI_IP22 select SWAP_IO_SPACE select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 - # - # Disable EARLY_PRINTK for now since it leads to overwritten prom - # memory during early boot on some machines. - # - # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com - # for a more details discussion - # - # select SYS_HAS_EARLY_PRINTK + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -674,8 +698,10 @@ config SGI_IP22 config SGI_IP27 bool "SGI IP27 (Origin200/2000)" select ARCH_HAS_PHYS_TO_DMA + select ARCH_SPARSEMEM_ENABLE select FW_ARC select FW_ARC64 + select ARC_CMDLINE_ONLY select BOOT_ELF64 select DEFAULT_SGI_PARTITION select SYS_HAS_EARLY_PRINTK @@ -698,6 +724,8 @@ config SGI_IP27 config SGI_IP28 bool "SGI IP28 (Indigo2 R10k)" + select ARC_MEMORY + select ARC_PROMLIB select FW_ARC select FW_ARC64 select ARCH_MIGHT_HAVE_PC_SERIO @@ -719,14 +747,7 @@ config SGI_IP28 select SGI_HAS_ZILOG select SWAP_IO_SPACE select SYS_HAS_CPU_R10000 - # - # Disable EARLY_PRINTK for now since it leads to overwritten prom - # memory during early boot on some machines. - # - # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com - # for a more details discussion - # - # select SYS_HAS_EARLY_PRINTK + select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select MIPS_L1_CACHE_SHIFT_7 @@ -736,6 +757,8 @@ config SGI_IP28 config SGI_IP32 bool "SGI IP32 (O2)" + select ARC_MEMORY + select ARC_PROMLIB select ARCH_HAS_PHYS_TO_DMA select FW_ARC select FW_ARC32 @@ -843,6 +866,8 @@ config SIBYTE_BIGSUR config SNI_RM bool "SNI RM200/300/400" + select ARC_MEMORY + select ARC_PROMLIB select FW_ARC if CPU_LITTLE_ENDIAN select FW_ARC32 if CPU_LITTLE_ENDIAN select FW_SNIPROM if CPU_BIG_ENDIAN @@ -1038,6 +1063,7 @@ source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" +source "arch/mips/loongson2ef/Kconfig" source "arch/mips/loongson32/Kconfig" source "arch/mips/loongson64/Kconfig" source "arch/mips/netlogic/Kconfig" @@ -1353,19 +1379,18 @@ config MIPS_L1_CACHE_SHIFT config HAVE_STD_PC_SERIAL_PORT bool +config ARC_CMDLINE_ONLY + bool + config ARC_CONSOLE bool "ARC console support" depends on SGI_IP22 || SGI_IP28 || (SNI_RM && CPU_LITTLE_ENDIAN) config ARC_MEMORY bool - depends on MACH_JAZZ || SNI_RM || SGI_IP32 - default y config ARC_PROMLIB bool - depends on MACH_JAZZ || SNI_RM || SGI_IP22 || SGI_IP28 || SGI_IP32 - default y config FW_ARC64 bool @@ -1379,34 +1404,36 @@ choice prompt "CPU type" default CPU_R4X00 -config CPU_LOONGSON3 - bool "Loongson 3 CPU" - depends on SYS_HAS_CPU_LOONGSON3 +config CPU_LOONGSON64 + bool "Loongson GSx64 CPU" + depends on SYS_HAS_CPU_LOONGSON64 select ARCH_HAS_PHYS_TO_DMA select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES + select CPU_SUPPORTS_MSA select CPU_HAS_LOAD_STORE_LR select WEAK_ORDERING select WEAK_REORDERING_BEYOND_LLSC + select MIPS_ASID_BITS_VARIABLE select MIPS_PGD_C0_CONTEXT select MIPS_L1_CACHE_SHIFT_6 select GPIOLIB select SWIOTLB help - The Loongson 3 processor implements the MIPS64R2 instruction - set with many extensions. + The Loongson GSx64 series of processor cores implements the + MIPS64R2 instruction set with many extensions. -config LOONGSON3_ENHANCEMENT - bool "New Loongson 3 CPU Enhancements" +config LOONGSON64_ENHANCEMENT + bool "New Loongson GSx64E CPU Enhancements" default n select CPU_MIPSR2 select CPU_HAS_PREFETCH - depends on CPU_LOONGSON3 + depends on CPU_LOONGSON64 help - New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A + New Loongson GSx64E cores (since Loongson-3A R2, as opposed to Loongson-3A R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as - FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User + FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPr2 ASE, User Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast TLB refill support, etc. @@ -1418,7 +1445,7 @@ config LOONGSON3_ENHANCEMENT config CPU_LOONGSON3_WORKAROUNDS bool "Old Loongson 3 LLSC Workarounds" default y if SMP - depends on CPU_LOONGSON3 + depends on CPU_LOONGSON64 help Loongson 3 processors have the llsc issues which require workarounds. Without workarounds the system may hang unexpectedly. @@ -1433,7 +1460,7 @@ config CPU_LOONGSON3_WORKAROUNDS config CPU_LOONGSON2E bool "Loongson 2E" depends on SYS_HAS_CPU_LOONGSON2E - select CPU_LOONGSON2 + select CPU_LOONGSON2EF help The Loongson 2E processor implements the MIPS III instruction set with many extensions. @@ -1444,7 +1471,7 @@ config CPU_LOONGSON2E config CPU_LOONGSON2F bool "Loongson 2F" depends on SYS_HAS_CPU_LOONGSON2F - select CPU_LOONGSON2 + select CPU_LOONGSON2EF select GPIOLIB help The Loongson 2F processor implements the MIPS III instruction set @@ -1857,7 +1884,7 @@ config SYS_SUPPORTS_ZBOOT_UART_PROM bool select SYS_SUPPORTS_ZBOOT -config CPU_LOONGSON2 +config CPU_LOONGSON2EF bool select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL @@ -1900,7 +1927,7 @@ config CPU_BMIPS5000 select SYS_SUPPORTS_HOTPLUG_CPU select CPU_HAS_RIXI -config SYS_HAS_CPU_LOONGSON3 +config SYS_HAS_CPU_LOONGSON64 bool select CPU_SUPPORTS_CPUFREQ select CPU_HAS_RIXI @@ -2162,7 +2189,7 @@ choice config PAGE_SIZE_4KB bool "4kB" - depends on !CPU_LOONGSON2 && !CPU_LOONGSON3 + depends on !CPU_LOONGSON2EF && !CPU_LOONGSON64 help This option select the standard 4kB Linux page size. On some R3000-family processors this is the only available page size. Using @@ -2554,6 +2581,10 @@ config CPU_R4000_WORKAROUNDS config CPU_R4400_WORKAROUNDS bool +config CPU_R4X00_BUGS64 + bool + default y if SYS_HAS_CPU_R4X00 && 64BIT && (TARGET_ISA_REV < 1) + config MIPS_ASID_SHIFT int default 6 if CPU_R3000 || CPU_TX39XX @@ -2612,20 +2643,11 @@ config CPU_SUPPORTS_MSA config ARCH_FLATMEM_ENABLE def_bool y - depends on !NUMA && !CPU_LOONGSON2 - -config ARCH_DISCONTIGMEM_ENABLE - bool - default y if SGI_IP27 - help - Say Y to support efficient handling of discontiguous physical memory, - for architectures which are either NUMA (Non-Uniform Memory Access) - or have huge holes in the physical address space for other reasons. - See <file:Documentation/vm/numa.rst> for more. + depends on !NUMA && !CPU_LOONGSON2EF config ARCH_SPARSEMEM_ENABLE bool - select SPARSEMEM_STATIC + select SPARSEMEM_STATIC if !SGI_IP27 config NUMA bool "NUMA Support" @@ -2702,7 +2724,7 @@ config NODES_SHIFT config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON3) + depends on PERF_EVENTS && !OPROFILE && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP || CPU_LOONGSON64) default y help Enable hardware performance counter support for perf events. If diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 0c86b2a2adfc..93a2974d2ab7 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -32,7 +32,6 @@ config USE_GENERIC_EARLY_PRINTK_8250 config CMDLINE_BOOL bool "Built-in kernel command line" - default n help For most systems, it is firmware or second stage bootloader that by default specifies the kernel command line options. However, @@ -53,7 +52,6 @@ config CMDLINE_BOOL config CMDLINE string "Default kernel command string" depends on CMDLINE_BOOL - default "" help On some platforms, there is currently no way for the boot loader to pass arguments to the kernel. For these platforms, and for the cases @@ -68,7 +66,6 @@ config CMDLINE config CMDLINE_OVERRIDE bool "Built-in command line overrides firmware arguments" - default n depends on CMDLINE_BOOL help By setting this option to 'Y' you will have your kernel ignore diff --git a/arch/mips/Makefile b/arch/mips/Makefile index cdc09b71febe..0a5eab626260 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -14,6 +14,9 @@ archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/mips/tools elf-entry +ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y) + $(Q)$(MAKE) $(build)=arch/mips/tools loongson3-llsc-check +endif $(Q)$(MAKE) $(build)=arch/mips/boot/tools relocs KBUILD_DEFCONFIG := 32r2el_defconfig diff --git a/arch/mips/Makefile.postlink b/arch/mips/Makefile.postlink index 4eea4188cb20..f03fdc95143e 100644 --- a/arch/mips/Makefile.postlink +++ b/arch/mips/Makefile.postlink @@ -3,7 +3,8 @@ # Post-link MIPS pass # =========================================================================== # -# 1. Insert relocations into vmlinux +# 1. Check that Loongson3 LL/SC workarounds are applied correctly +# 2. Insert relocations into vmlinux PHONY := __archpost __archpost: @@ -11,6 +12,10 @@ __archpost: -include include/config/auto.conf include scripts/Kbuild.include +CMD_LS3_LLSC = arch/mips/tools/loongson3-llsc-check +quiet_cmd_ls3_llsc = LLSCCHK $@ + cmd_ls3_llsc = $(CMD_LS3_LLSC) $@ + CMD_RELOCS = arch/mips/boot/tools/relocs quiet_cmd_relocs = RELOCS $@ cmd_relocs = $(CMD_RELOCS) $@ @@ -19,6 +24,9 @@ quiet_cmd_relocs = RELOCS $@ vmlinux: FORCE @true +ifeq ($(CONFIG_CPU_LOONGSON3_WORKAROUNDS),y) + $(call if_changed,ls3_llsc) +endif ifeq ($(CONFIG_RELOCATABLE),y) $(call if_changed,relocs) endif diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 2e9952311ecd..37b93166bf22 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -25,12 +25,47 @@ 0x30000000 0x30000000>; }; + leds { + compatible = "gpio-leds"; + + led0 { + label = "ci20:red:led0"; + gpios = <&gpc 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + led1 { + label = "ci20:red:led1"; + gpios = <&gpc 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "nand-disk"; + }; + + led2 { + label = "ci20:red:led2"; + gpios = <&gpc 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu1"; + }; + + led3 { + label = "ci20:red:led3"; + gpios = <&gpc 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + }; + eth0_power: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "eth0_power"; gpio = <&gpb 25 GPIO_ACTIVE_LOW>; enable-active-high; }; + + wlan0_power: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "wlan0_power"; + gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + enable-active-high; + }; }; &ext { @@ -54,9 +89,18 @@ bus-width = <4>; max-frequency = <50000000>; + non-removable; pinctrl-names = "default"; pinctrl-0 = <&pins_mmc1>; + + brcmf: wifi@1 { +/* reg = <4>;*/ + compatible = "brcm,bcm4330-fmac"; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + }; }; &uart0 { @@ -73,6 +117,23 @@ pinctrl-0 = <&pins_uart1>; }; +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + }; +}; + &uart3 { status = "okay"; @@ -87,6 +148,123 @@ pinctrl-0 = <&pins_uart4>; }; +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + clock-frequency = <400000>; + + act8600: act8600@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + status = "okay"; + + regulators { + vddcore: SUDCDC1 { + regulator-name = "VDDCORE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + vddmem: SUDCDC2 { + regulator-name = "VDDMEM"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_33: SUDCDC3 { + regulator-name = "VCC33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vcc_50: SUDCDC4 { + regulator-name = "VCC50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vcc_25: LDO_REG5 { + regulator-name = "VCC25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + wifi_io: LDO_REG6 { + regulator-name = "WIFIIO"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vcc_28: LDO_REG7 { + regulator-name = "VCC28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + vcc_15: LDO_REG8 { + regulator-name = "VCC15"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_18: LDO_REG9 { + regulator-name = "VCC18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vcc_11: LDO_REG10 { + regulator-name = "VCC11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c1>; + +}; + +&i2c2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c2>; + +}; + +&i2c3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c3>; + +}; + +&i2c4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4>; + + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupts = <110>; + }; +}; + &nemc { status = "okay"; @@ -197,6 +375,12 @@ bias-disable; }; + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + pins_uart3: uart3 { function = "uart3"; groups = "uart3-data", "uart3-hwflow"; @@ -209,6 +393,36 @@ bias-disable; }; + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-disable; + }; + + pins_i2c1: i2c1 { + function = "i2c1"; + groups = "i2c1-data"; + bias-disable; + }; + + pins_i2c2: i2c2 { + function = "i2c2"; + groups = "i2c2-data"; + bias-disable; + }; + + pins_i2c3: i2c3 { + function = "i2c3"; + groups = "i2c3-data"; + bias-disable; + }; + + pins_i2c4: i2c4 { + function = "i2c4"; + groups = "i2c4-data-e"; + bias-disable; + }; + pins_nemc: nemc { function = "nemc"; groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe"; diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index c54bd7cfec55..f928329b034b 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -262,6 +262,92 @@ status = "disabled"; }; + i2c0: i2c@10050000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x10050000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <60>; + + clocks = <&cgu JZ4780_CLK_SMB0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0_data>; + + status = "disabled"; + }; + + i2c1: i2c@10051000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10051000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <59>; + + clocks = <&cgu JZ4780_CLK_SMB1>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c1_data>; + + status = "disabled"; + }; + + i2c2: i2c@10052000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10052000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <58>; + + clocks = <&cgu JZ4780_CLK_SMB2>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c2_data>; + + status = "disabled"; + }; + + i2c3: i2c@10053000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10053000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <57>; + + clocks = <&cgu JZ4780_CLK_SMB3>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c3_data>; + + status = "disabled"; + }; + + i2c4: i2c@10054000 { + compatible = "ingenic,jz4780-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10054000 0x1000>; + + interrupt-parent = <&intc>; + interrupts = <56>; + + clocks = <&cgu JZ4780_CLK_SMB4>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4_data>; + + status = "disabled"; + }; + watchdog: watchdog@10002000 { compatible = "ingenic,jz4780-watchdog"; reg = <0x10002000 0x10>; diff --git a/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts new file mode 100644 index 000000000000..aa5caaa31104 --- /dev/null +++ b/arch/mips/boot/dts/ralink/gardena_smart_gateway_mt7688.dts @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019 Stefan Roese <sr@denx.de> + */ + +/dts-v1/; + +/include/ "mt7628a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "gardena,smart-gateway-mt7688", "ralink,mt7688a-soc", + "ralink,mt7628a-soc"; + model = "GARDENA smart Gateway (MT7688)"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_gpio_gpio>; /* GPIO11 */ + + user_btn1 { + label = "USER_BTN1"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code =<KEY_PROG1> ; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_pwm0_gpio>, /* GPIO18 */ + <&pinmux_pwm1_gpio>, /* GPIO19 */ + <&pinmux_sdmode_gpio>, /* GPIO22..29 */ + <&pinmux_p0led_an_gpio>; /* GPIO43 */ + /* + * <&pinmux_i2s_gpio> (covers GPIO0..3) is needed here as + * well for GPIO3. But this is already claimed for uart1 + * (see below). So we can't include it in this LED node. + */ + + power_blue { + label = "smartgw:power:blue"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_green { + label = "smartgw:power:green"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power_red { + label = "smartgw:power:red"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_blue { + label = "smartgw:radio:blue"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_green { + label = "smartgw:radio:green"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + radio_red { + label = "smartgw:radio:red"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_blue { + label = "smartgw:internet:blue"; + gpios = <&gpio 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_green { + label = "smartgw:internet:green"; + gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + internet_red { + label = "smartgw:internet:red"; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + ethernet_link { + label = "smartgw:eth:link"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + + ethernet_activity { + label = "smartgw:eth:act"; + gpios = <&gpio 43 GPIO_ACTIVE_LOW>; + linux,default-trigger = "netdev"; + }; + }; + + aliases { + serial0 = &uart0; + }; +}; + +&i2c { + status = "okay"; +}; + +&spi { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_spi_spi>, <&pinmux_spi_cs1_cs>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "uboot_env0"; + reg = <0xa0000 0x10000>; + }; + + partition@b0000 { + label = "uboot_env1"; + reg = <0xb0000 0x10000>; + }; + + factory: partition@c0000 { + label = "factory"; + reg = <0xc0000 0x10000>; + read-only; + }; + }; + }; + + nand_flash@1 { + compatible = "spi-nand"; + linux,mtd-name = "gd5f"; + reg = <1>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2s_gpio>; /* GPIO0..3 */ + + rts-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio 2 GPIO_ACTIVE_LOW>; +}; + +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_p2led_an_gpio>, /* GPIO41 */ + <&pinmux_p3led_an_gpio>; /* GPIO40 */ + + rts-gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio 41 GPIO_ACTIVE_LOW>; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi index 61f8621e88b3..742bcc1dc2e0 100644 --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi @@ -199,6 +199,22 @@ status = "disabled"; }; + i2c: i2c@900 { + compatible = "mediatek,mt7621-i2c"; + reg = <0x900 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_i2c_i2c>; + + resets = <&resetc 16>; + reset-names = "i2c"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + uart0: uartlite@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 95034bf5ca83..1f742c32a883 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -844,7 +844,7 @@ void __init prom_init(void) * BIST should always be enabled when doing a soft reset. L2 * Cache locking for instance is not cleared unless BIST is * enabled. Unfortunately due to a chip errata G-200 for - * Cn38XX and CN31XX, BIST msut be disabled on these parts. + * Cn38XX and CN31XX, BIST must be disabled on these parts. */ if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) || OCTEON_IS_MODEL(OCTEON_CN31XX)) diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index 7a7af706e898..1788ae23bff9 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -15,7 +15,7 @@ CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y CONFIG_PROFILING=y -CONFIG_MACH_LOONGSON64=y +CONFIG_MACH_LOONGSON2EF=y CONFIG_PCI=y CONFIG_MIPS32_O32=y CONFIG_MIPS32_N32=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index d44f1469cf64..f9f93427c9bd 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -12,7 +12,7 @@ CONFIG_LOG_BUF_SHIFT=15 CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_PROFILING=y -CONFIG_MACH_LOONGSON64=y +CONFIG_MACH_LOONGSON2EF=y CONFIG_LEMOTE_MACH2F=y CONFIG_KEXEC=y # CONFIG_SECCOMP is not set diff --git a/arch/mips/configs/loongson3_defconfig b/arch/mips/configs/loongson3_defconfig index 90ee0084d786..c16a2330e84d 100644 --- a/arch/mips/configs/loongson3_defconfig +++ b/arch/mips/configs/loongson3_defconfig @@ -12,7 +12,6 @@ CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_LOG_BUF_SHIFT=14 CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_BLK_CGROUP=y @@ -24,7 +23,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_MACH_LOONGSON64=y -CONFIG_LOONGSON_MACH3X=y CONFIG_SMP=y CONFIG_HZ_256=y CONFIG_KEXEC=y diff --git a/arch/mips/fw/arc/Makefile b/arch/mips/fw/arc/Makefile index 31dd7305d643..64d685efcc77 100644 --- a/arch/mips/fw/arc/Makefile +++ b/arch/mips/fw/arc/Makefile @@ -3,8 +3,12 @@ # Makefile for the ARC prom monitor library routines under Linux. # +ifdef CONFIG_ARC_CMDLINE_ONLY +lib-y += cmdline.o +else lib-y += cmdline.o env.o file.o identify.o init.o \ - misc.o salone.o time.o tree.o + misc.o +endif lib-$(CONFIG_ARC_MEMORY) += memory.o lib-$(CONFIG_ARC_CONSOLE) += arc_con.o diff --git a/arch/mips/fw/arc/cmdline.c b/arch/mips/fw/arc/cmdline.c index c0122a1dc587..155c5e911723 100644 --- a/arch/mips/fw/arc/cmdline.c +++ b/arch/mips/fw/arc/cmdline.c @@ -17,6 +17,12 @@ #undef DEBUG_CMDLINE +/* + * A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. + * These macro take care of sign extension. + */ +#define prom_argv(index) ((char *) (long)argv[(index)]) + static char *ignored[] = { "ConsoleIn=", "ConsoleOut=", @@ -32,14 +38,14 @@ static char *used_arc[][2] = { { "OSLoadOptions=", "" } }; -static char * __init move_firmware_args(char* cp) +static char __init *move_firmware_args(int argc, LONG *argv, char *cp) { char *s; int actr, i; actr = 1; /* Always ignore argv[0] */ - while (actr < prom_argc) { + while (actr < argc) { for(i = 0; i < ARRAY_SIZE(used_arc); i++) { int len = strlen(used_arc[i][0]); @@ -64,7 +70,7 @@ static char * __init move_firmware_args(char* cp) return cp; } -void __init prom_init_cmdline(void) +void __init prom_init_cmdline(int argc, LONG *argv) { char *cp; int actr, i; @@ -76,9 +82,9 @@ void __init prom_init_cmdline(void) * Move ARC variables to the beginning to make sure they can be * overridden by later arguments. */ - cp = move_firmware_args(cp); + cp = move_firmware_args(argc, argv, cp); - while (actr < prom_argc) { + while (actr < argc) { for (i = 0; i < ARRAY_SIZE(ignored); i++) { int len = strlen(ignored[i]); diff --git a/arch/mips/fw/arc/env.c b/arch/mips/fw/arc/env.c index 1118a26b32ee..02407a7bb38e 100644 --- a/arch/mips/fw/arc/env.c +++ b/arch/mips/fw/arc/env.c @@ -19,9 +19,3 @@ ArcGetEnvironmentVariable(CHAR *name) { return (CHAR *) ARC_CALL1(get_evar, name); } - -LONG __init -ArcSetEnvironmentVariable(PCHAR name, PCHAR value) -{ - return ARC_CALL2(set_evar, name, value); -} diff --git a/arch/mips/fw/arc/file.c b/arch/mips/fw/arc/file.c index 49fd3ff13fe5..b0d8535c80cc 100644 --- a/arch/mips/fw/arc/file.c +++ b/arch/mips/fw/arc/file.c @@ -13,62 +13,13 @@ #include <asm/sgialib.h> LONG -ArcGetDirectoryEntry(ULONG FileID, struct linux_vdirent *Buffer, - ULONG N, ULONG *Count) -{ - return ARC_CALL4(get_vdirent, FileID, Buffer, N, Count); -} - -LONG -ArcOpen(CHAR *Path, enum linux_omode OpenMode, ULONG *FileID) -{ - return ARC_CALL3(open, Path, OpenMode, FileID); -} - -LONG -ArcClose(ULONG FileID) -{ - return ARC_CALL1(close, FileID); -} - -LONG ArcRead(ULONG FileID, VOID *Buffer, ULONG N, ULONG *Count) { return ARC_CALL4(read, FileID, Buffer, N, Count); } LONG -ArcGetReadStatus(ULONG FileID) -{ - return ARC_CALL1(get_rstatus, FileID); -} - -LONG ArcWrite(ULONG FileID, PVOID Buffer, ULONG N, PULONG Count) { return ARC_CALL4(write, FileID, Buffer, N, Count); } - -LONG -ArcSeek(ULONG FileID, struct linux_bigint *Position, enum linux_seekmode SeekMode) -{ - return ARC_CALL3(seek, FileID, Position, SeekMode); -} - -LONG -ArcMount(char *name, enum linux_mountops op) -{ - return ARC_CALL2(mount, name, op); -} - -LONG -ArcGetFileInformation(ULONG FileID, struct linux_finfo *Information) -{ - return ARC_CALL2(get_finfo, FileID, Information); -} - -LONG ArcSetFileInformation(ULONG FileID, ULONG AttributeFlags, - ULONG AttributeMask) -{ - return ARC_CALL3(set_finfo, FileID, AttributeFlags, AttributeMask); -} diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index f90266c02c9d..5527e0f54079 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -32,10 +32,6 @@ static struct smatch mach_table[] = { .liname = "SGI Indy", .flags = PROM_FLAG_ARCS, }, { - .arcname = "SGI-IP27", - .liname = "SGI Origin", - .flags = PROM_FLAG_ARCS, - }, { .arcname = "SGI-IP28", .liname = "SGI IP28", .flags = PROM_FLAG_ARCS, @@ -87,6 +83,11 @@ const char *get_system_type(void) return system_type; } +static pcomponent * __init ArcGetChild(pcomponent *Current) +{ + return (pcomponent *) ARC_CALL1(child_component, Current); +} + void __init prom_identify_arch(void) { pcomponent *p; @@ -98,13 +99,7 @@ void __init prom_identify_arch(void) */ p = ArcGetChild(PROM_NULL_COMPONENT); if (p == NULL) { -#ifdef CONFIG_SGI_IP27 - /* IP27 PROM misbehaves, seems to not implement ARC - GetChild(). So we just assume it's an IP27. */ - iname = "SGI-IP27"; -#else iname = "Unknown"; -#endif } else iname = (char *) (long) p->iname; diff --git a/arch/mips/fw/arc/init.c b/arch/mips/fw/arc/init.c index 008555969534..f9d1dea9b2ca 100644 --- a/arch/mips/fw/arc/init.c +++ b/arch/mips/fw/arc/init.c @@ -18,8 +18,11 @@ /* Master romvec interface. */ struct linux_romvec *romvec; -int prom_argc; -LONG *_prom_argv, *_prom_envp; + +#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) +/* stack for calling 32bit ARC prom */ +u64 o32_stk[4096]; +#endif void __init prom_init(void) { @@ -27,10 +30,6 @@ void __init prom_init(void) romvec = ROMVECTOR; - prom_argc = fw_arg0; - _prom_argv = (LONG *) fw_arg1; - _prom_envp = (LONG *) fw_arg2; - if (pb->magic != 0x53435241) { printk(KERN_CRIT "Aieee, bad prom vector magic %08lx\n", (unsigned long) pb->magic); @@ -38,7 +37,7 @@ void __init prom_init(void) ; } - prom_init_cmdline(); + prom_init_cmdline(fw_arg0, (LONG *)fw_arg1); prom_identify_arch(); printk(KERN_INFO "PROMLIB: ARC firmware Version %d Revision %d\n", pb->ver, pb->rev); @@ -49,11 +48,4 @@ void __init prom_init(void) ArcRead(0, &c, 1, &cnt); ArcEnterInteractiveMode(); #endif -#ifdef CONFIG_SGI_IP27 - { - extern const struct plat_smp_ops ip27_smp_ops; - - register_smp_ops(&ip27_smp_ops); - } -#endif } diff --git a/arch/mips/fw/arc/memory.c b/arch/mips/fw/arc/memory.c index b4328b3b5288..dbbcddc82823 100644 --- a/arch/mips/fw/arc/memory.c +++ b/arch/mips/fw/arc/memory.c @@ -158,6 +158,10 @@ void __init prom_meminit(void) } } +void __weak __init prom_cleanup(void) +{ +} + void __init prom_free_prom_memory(void) { int i; @@ -169,4 +173,9 @@ void __init prom_free_prom_memory(void) free_init_pages("prom memory", prom_mem_base[i], prom_mem_base[i] + prom_mem_size[i]); } + /* + * at this point it isn't safe to call PROM functions + * give platforms a way to do PROM cleanups + */ + prom_cleanup(); } diff --git a/arch/mips/fw/arc/misc.c b/arch/mips/fw/arc/misc.c index 19f710117d97..d5b2d5901324 100644 --- a/arch/mips/fw/arc/misc.c +++ b/arch/mips/fw/arc/misc.c @@ -21,47 +21,6 @@ #include <asm/bootinfo.h> VOID __noreturn -ArcHalt(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(halt); - - unreachable(); -} - -VOID __noreturn -ArcPowerDown(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(pdown); - - unreachable(); -} - -/* XXX is this a soft reset basically? XXX */ -VOID __noreturn -ArcRestart(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(restart); - - unreachable(); -} - -VOID __noreturn -ArcReboot(VOID) -{ - bc_disable(); - local_irq_disable(); - ARC_CALL0(reboot); - - unreachable(); -} - -VOID __noreturn ArcEnterInteractiveMode(VOID) { bc_disable(); @@ -71,24 +30,6 @@ ArcEnterInteractiveMode(VOID) unreachable(); } -LONG -ArcSaveConfiguration(VOID) -{ - return ARC_CALL0(cfg_save); -} - -struct linux_sysid * -ArcGetSystemId(VOID) -{ - return (struct linux_sysid *) ARC_CALL0(get_sysid); -} - -VOID __init -ArcFlushAllCaches(VOID) -{ - ARC_CALL0(cache_flush); -} - DISPLAY_STATUS * __init ArcGetDisplayStatus(ULONG FileID) { return (DISPLAY_STATUS *) ARC_CALL1(GetDisplayStatus, FileID); diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c index be381307fbb0..5e9e840a9314 100644 --- a/arch/mips/fw/arc/promlib.c +++ b/arch/mips/fw/arc/promlib.c @@ -11,6 +11,21 @@ #include <asm/bcache.h> #include <asm/setup.h> +#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) +/* + * For 64bit kernels working with a 32bit ARC PROM pointer arguments + * for ARC calls need to reside in CKEG0/1. But as soon as the kernel + * switches to it's first kernel thread stack is set to an address in + * XKPHYS, so anything on stack can't be used anymore. This is solved + * by using a * static declartion variables are put into BSS, which is + * linked to a CKSEG0 address. Since this is only used on UP platforms + * there is not spinlock needed + */ +#define O32_STATIC static +#else +#define O32_STATIC +#endif + /* * IP22 boardcache is not compatible with board caches. Thus we disable it * during romvec action. Since r4xx0.c is always compiled and linked with your @@ -23,8 +38,10 @@ void prom_putchar(char c) { - ULONG cnt; - CHAR it = c; + O32_STATIC ULONG cnt; + O32_STATIC CHAR it; + + it = c; bc_disable(); ArcWrite(1, &it, 1, &cnt); @@ -33,8 +50,8 @@ void prom_putchar(char c) char prom_getchar(void) { - ULONG cnt; - CHAR c; + O32_STATIC ULONG cnt; + O32_STATIC CHAR c; bc_disable(); ArcRead(0, &c, 1, &cnt); diff --git a/arch/mips/fw/arc/salone.c b/arch/mips/fw/arc/salone.c deleted file mode 100644 index 2d99f44d5576..000000000000 --- a/arch/mips/fw/arc/salone.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Routines to load into memory and execute stand-along program images using - * ARCS PROM firmware. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ -#include <linux/init.h> -#include <asm/sgialib.h> - -LONG __init ArcLoad(CHAR *Path, ULONG TopAddr, ULONG *ExecAddr, ULONG *LowAddr) -{ - return ARC_CALL4(load, Path, TopAddr, ExecAddr, LowAddr); -} - -LONG __init ArcInvoke(ULONG ExecAddr, ULONG StackAddr, ULONG Argc, CHAR *Argv[], - CHAR *Envp[]) -{ - return ARC_CALL5(invoke, ExecAddr, StackAddr, Argc, Argv, Envp); -} - -LONG __init ArcExecute(CHAR *Path, LONG Argc, CHAR *Argv[], CHAR *Envp[]) -{ - return ARC_CALL4(exec, Path, Argc, Argv, Envp); -} diff --git a/arch/mips/fw/arc/time.c b/arch/mips/fw/arc/time.c deleted file mode 100644 index 190cdb50b895..000000000000 --- a/arch/mips/fw/arc/time.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Extracting time information from ARCS prom. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ -#include <linux/init.h> - -#include <asm/fw/arc/types.h> -#include <asm/sgialib.h> - -struct linux_tinfo * __init -ArcGetTime(VOID) -{ - return (struct linux_tinfo *) ARC_CALL0(get_tinfo); -} - -ULONG __init -ArcGetRelativeTime(VOID) -{ - return ARC_CALL0(get_rtime); -} diff --git a/arch/mips/fw/arc/tree.c b/arch/mips/fw/arc/tree.c deleted file mode 100644 index 924a37dc2569..000000000000 --- a/arch/mips/fw/arc/tree.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * PROM component device tree code. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#include <linux/init.h> -#include <asm/fw/arc/types.h> -#include <asm/sgialib.h> - -#undef DEBUG_PROM_TREE - -pcomponent * __init -ArcGetPeer(pcomponent *Current) -{ - if (Current == PROM_NULL_COMPONENT) - return PROM_NULL_COMPONENT; - - return (pcomponent *) ARC_CALL1(next_component, Current); -} - -pcomponent * __init -ArcGetChild(pcomponent *Current) -{ - return (pcomponent *) ARC_CALL1(child_component, Current); -} - -pcomponent * __init -ArcGetParent(pcomponent *Current) -{ - if (Current == PROM_NULL_COMPONENT) - return PROM_NULL_COMPONENT; - - return (pcomponent *) ARC_CALL1(parent_component, Current); -} - -LONG __init -ArcGetConfigurationData(VOID *Buffer, pcomponent *Current) -{ - return ARC_CALL2(component_data, Buffer, Current); -} - -pcomponent * __init -ArcAddChild(pcomponent *Current, pcomponent *Template, VOID *ConfigurationData) -{ - return (pcomponent *) - ARC_CALL3(child_add, Current, Template, ConfigurationData); -} - -LONG __init -ArcDeleteComponent(pcomponent *ComponentToDelete) -{ - return ARC_CALL1(comp_del, ComponentToDelete); -} - -pcomponent * __init -ArcGetComponent(CHAR *Path) -{ - return (pcomponent *)ARC_CALL1(component_by_path, Path); -} - -#ifdef DEBUG_PROM_TREE - -static char *classes[] = { - "system", "processor", "cache", "adapter", "controller", "peripheral", - "memory" -}; - -static char *types[] = { - "arc", "cpu", "fpu", "picache", "pdcache", "sicache", "sdcache", - "sccache", "memdev", "eisa adapter", "tc adapter", "scsi adapter", - "dti adapter", "multi-func adapter", "disk controller", - "tp controller", "cdrom controller", "worm controller", - "serial controller", "net controller", "display controller", - "parallel controller", "pointer controller", "keyboard controller", - "audio controller", "misc controller", "disk peripheral", - "floppy peripheral", "tp peripheral", "modem peripheral", - "monitor peripheral", "printer peripheral", "pointer peripheral", - "keyboard peripheral", "terminal peripheral", "line peripheral", - "net peripheral", "misc peripheral", "anonymous" -}; - -static char *iflags[] = { - "bogus", "read only", "removable", "console in", "console out", - "input", "output" -}; - -static void __init -dump_component(pcomponent *p) -{ - printk("[%p]:class<%s>type<%s>flags<%s>ver<%d>rev<%d>", - p, classes[p->class], types[p->type], - iflags[p->iflags], p->vers, p->rev); - printk("key<%08lx>\n\tamask<%08lx>cdsize<%d>ilen<%d>iname<%s>\n", - p->key, p->amask, (int)p->cdsize, (int)p->ilen, p->iname); -} - -static void __init -traverse(pcomponent *p, int op) -{ - dump_component(p); - if(ArcGetChild(p)) - traverse(ArcGetChild(p), 1); - if(ArcGetPeer(p) && op) - traverse(ArcGetPeer(p), 1); -} - -void __init -prom_testtree(void) -{ - pcomponent *p; - - p = ArcGetChild(PROM_NULL_COMPONENT); - dump_component(p); - p = ArcGetChild(p); - while(p) { - dump_component(p); - p = ArcGetPeer(p); - } -} - -#endif /* DEBUG_PROM_TREE */ diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c index d5b8c4717ded..1de215b283d6 100644 --- a/arch/mips/generic/init.c +++ b/arch/mips/generic/init.c @@ -20,9 +20,9 @@ #include <asm/smp-ops.h> #include <asm/time.h> -static __initdata const void *fdt; -static __initdata const struct mips_machine *mach; -static __initdata const void *mach_match_data; +static __initconst const void *fdt; +static __initconst const struct mips_machine *mach; +static __initconst const void *mach_match_data; void __init prom_init(void) { diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index bb8658cc7f12..e5ac88392d1f 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -20,157 +20,176 @@ #include <asm/compiler.h> #include <asm/cpu-features.h> #include <asm/cmpxchg.h> +#include <asm/llsc.h> +#include <asm/sync.h> #include <asm/war.h> -/* - * Using a branch-likely instruction to check the result of an sc instruction - * works around a bug present in R10000 CPUs prior to revision 3.0 that could - * cause ll-sc sequences to execute non-atomically. - */ -#if R10000_LLSC_WAR -# define __scbeqz "beqzl" -#else -# define __scbeqz "beqz" -#endif - -#define ATOMIC_INIT(i) { (i) } +#define ATOMIC_OPS(pfx, type) \ +static __always_inline type pfx##_read(const pfx##_t *v) \ +{ \ + return READ_ONCE(v->counter); \ +} \ + \ +static __always_inline void pfx##_set(pfx##_t *v, type i) \ +{ \ + WRITE_ONCE(v->counter, i); \ +} \ + \ +static __always_inline type pfx##_cmpxchg(pfx##_t *v, type o, type n) \ +{ \ + return cmpxchg(&v->counter, o, n); \ +} \ + \ +static __always_inline type pfx##_xchg(pfx##_t *v, type n) \ +{ \ + return xchg(&v->counter, n); \ +} -/* - * atomic_read - read atomic variable - * @v: pointer of type atomic_t - * - * Atomically reads the value of @v. - */ -#define atomic_read(v) READ_ONCE((v)->counter) +#define ATOMIC_INIT(i) { (i) } +ATOMIC_OPS(atomic, int) -/* - * atomic_set - set atomic variable - * @v: pointer of type atomic_t - * @i: required value - * - * Atomically sets the value of @v to @i. - */ -#define atomic_set(v, i) WRITE_ONCE((v)->counter, (i)) +#ifdef CONFIG_64BIT +# define ATOMIC64_INIT(i) { (i) } +ATOMIC_OPS(atomic64, s64) +#endif -#define ATOMIC_OP(op, c_op, asm_op) \ -static __inline__ void atomic_##op(int i, atomic_t * v) \ -{ \ - if (kernel_uses_llsc) { \ - int temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: ll %0, %1 # atomic_" #op " \n" \ - " " #asm_op " %0, %2 \n" \ - " sc %0, %1 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " .set pop \n" \ - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ +#define ATOMIC_OP(pfx, op, type, c_op, asm_op, ll, sc) \ +static __inline__ void pfx##_##op(type i, pfx##_t * v) \ +{ \ + type temp; \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + v->counter c_op i; \ + raw_local_irq_restore(flags); \ + return; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %0, %1 # " #pfx "_" #op " \n" \ + " " #asm_op " %0, %2 \n" \ + " " #sc " %0, %1 \n" \ + "\t" __SC_BEQZ "%0, 1b \n" \ + " .set pop \n" \ + : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) : __LLSC_CLOBBER); \ } -#define ATOMIC_OP_RETURN(op, c_op, asm_op) \ -static __inline__ int atomic_##op##_return_relaxed(int i, atomic_t * v) \ -{ \ - int result; \ - \ - if (kernel_uses_llsc) { \ - int temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: ll %1, %2 # atomic_" #op "_return \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " sc %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " .set pop \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - result c_op i; \ - v->counter = result; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ +#define ATOMIC_OP_RETURN(pfx, op, type, c_op, asm_op, ll, sc) \ +static __inline__ type pfx##_##op##_return_relaxed(type i, pfx##_t * v) \ +{ \ + type temp, result; \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + result = v->counter; \ + result c_op i; \ + v->counter = result; \ + raw_local_irq_restore(flags); \ + return result; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %1, %2 # " #pfx "_" #op "_return\n" \ + " " #asm_op " %0, %1, %3 \n" \ + " " #sc " %0, %2 \n" \ + "\t" __SC_BEQZ "%0, 1b \n" \ + " " #asm_op " %0, %1, %3 \n" \ + " .set pop \n" \ + : "=&r" (result), "=&r" (temp), \ + "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) : __LLSC_CLOBBER); \ + \ + return result; \ } -#define ATOMIC_FETCH_OP(op, c_op, asm_op) \ -static __inline__ int atomic_fetch_##op##_relaxed(int i, atomic_t * v) \ -{ \ - int result; \ - \ - if (kernel_uses_llsc) { \ - int temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: ll %1, %2 # atomic_fetch_" #op " \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " sc %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " .set pop \n" \ - " move %0, %1 \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ +#define ATOMIC_FETCH_OP(pfx, op, type, c_op, asm_op, ll, sc) \ +static __inline__ type pfx##_fetch_##op##_relaxed(type i, pfx##_t * v) \ +{ \ + int temp, result; \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + result = v->counter; \ + v->counter c_op i; \ + raw_local_irq_restore(flags); \ + return result; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %1, %2 # " #pfx "_fetch_" #op "\n" \ + " " #asm_op " %0, %1, %3 \n" \ + " " #sc " %0, %2 \n" \ + "\t" __SC_BEQZ "%0, 1b \n" \ + " .set pop \n" \ + " move %0, %1 \n" \ + : "=&r" (result), "=&r" (temp), \ + "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) : __LLSC_CLOBBER); \ + \ + return result; \ } -#define ATOMIC_OPS(op, c_op, asm_op) \ - ATOMIC_OP(op, c_op, asm_op) \ - ATOMIC_OP_RETURN(op, c_op, asm_op) \ - ATOMIC_FETCH_OP(op, c_op, asm_op) +#undef ATOMIC_OPS +#define ATOMIC_OPS(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_OP(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_OP_RETURN(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_FETCH_OP(pfx, op, type, c_op, asm_op, ll, sc) -ATOMIC_OPS(add, +=, addu) -ATOMIC_OPS(sub, -=, subu) +ATOMIC_OPS(atomic, add, int, +=, addu, ll, sc) +ATOMIC_OPS(atomic, sub, int, -=, subu, ll, sc) #define atomic_add_return_relaxed atomic_add_return_relaxed #define atomic_sub_return_relaxed atomic_sub_return_relaxed #define atomic_fetch_add_relaxed atomic_fetch_add_relaxed #define atomic_fetch_sub_relaxed atomic_fetch_sub_relaxed +#ifdef CONFIG_64BIT +ATOMIC_OPS(atomic64, add, s64, +=, daddu, lld, scd) +ATOMIC_OPS(atomic64, sub, s64, -=, dsubu, lld, scd) +# define atomic64_add_return_relaxed atomic64_add_return_relaxed +# define atomic64_sub_return_relaxed atomic64_sub_return_relaxed +# define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed +# define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed +#endif /* CONFIG_64BIT */ + #undef ATOMIC_OPS -#define ATOMIC_OPS(op, c_op, asm_op) \ - ATOMIC_OP(op, c_op, asm_op) \ - ATOMIC_FETCH_OP(op, c_op, asm_op) +#define ATOMIC_OPS(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_OP(pfx, op, type, c_op, asm_op, ll, sc) \ + ATOMIC_FETCH_OP(pfx, op, type, c_op, asm_op, ll, sc) -ATOMIC_OPS(and, &=, and) -ATOMIC_OPS(or, |=, or) -ATOMIC_OPS(xor, ^=, xor) +ATOMIC_OPS(atomic, and, int, &=, and, ll, sc) +ATOMIC_OPS(atomic, or, int, |=, or, ll, sc) +ATOMIC_OPS(atomic, xor, int, ^=, xor, ll, sc) #define atomic_fetch_and_relaxed atomic_fetch_and_relaxed #define atomic_fetch_or_relaxed atomic_fetch_or_relaxed #define atomic_fetch_xor_relaxed atomic_fetch_xor_relaxed +#ifdef CONFIG_64BIT +ATOMIC_OPS(atomic64, and, s64, &=, and, lld, scd) +ATOMIC_OPS(atomic64, or, s64, |=, or, lld, scd) +ATOMIC_OPS(atomic64, xor, s64, ^=, xor, lld, scd) +# define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed +# define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed +# define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed +#endif + #undef ATOMIC_OPS #undef ATOMIC_FETCH_OP #undef ATOMIC_OP_RETURN @@ -184,258 +203,66 @@ ATOMIC_OPS(xor, ^=, xor) * Atomically test @v and subtract @i if @v is greater or equal than @i. * The function returns the old value of @v minus @i. */ -static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) -{ - int result; - - smp_mb__before_llsc(); - - if (kernel_uses_llsc) { - int temp; - - loongson_llsc_mb(); - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_LEVEL" \n" - "1: ll %1, %2 # atomic_sub_if_positive\n" - " .set pop \n" - " subu %0, %1, %3 \n" - " move %1, %0 \n" - " bltz %0, 2f \n" - " .set push \n" - " .set "MIPS_ISA_LEVEL" \n" - " sc %1, %2 \n" - "\t" __scbeqz " %1, 1b \n" - "2: \n" - " .set pop \n" - : "=&r" (result), "=&r" (temp), - "+" GCC_OFF_SMALL_ASM() (v->counter) - : "Ir" (i) : __LLSC_CLOBBER); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - if (result >= 0) - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; +#define ATOMIC_SIP_OP(pfx, type, op, ll, sc) \ +static __inline__ int pfx##_sub_if_positive(type i, pfx##_t * v) \ +{ \ + type temp, result; \ + \ + smp_mb__before_atomic(); \ + \ + if (!kernel_uses_llsc) { \ + unsigned long flags; \ + \ + raw_local_irq_save(flags); \ + result = v->counter; \ + result -= i; \ + if (result >= 0) \ + v->counter = result; \ + raw_local_irq_restore(flags); \ + smp_mb__after_atomic(); \ + return result; \ + } \ + \ + __asm__ __volatile__( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " #ll " %1, %2 # atomic_sub_if_positive\n" \ + " .set pop \n" \ + " " #op " %0, %1, %3 \n" \ + " move %1, %0 \n" \ + " bltz %0, 2f \n" \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " #sc " %1, %2 \n" \ + " " __SC_BEQZ "%1, 1b \n" \ + "2: " __SYNC(full, loongson3_war) " \n" \ + " .set pop \n" \ + : "=&r" (result), "=&r" (temp), \ + "+" GCC_OFF_SMALL_ASM() (v->counter) \ + : "Ir" (i) \ + : __LLSC_CLOBBER); \ + \ + /* \ + * In the Loongson3 workaround case we already have a \ + * completion barrier at 2: above, which is needed due to the \ + * bltz that can branch to code outside of the LL/SC loop. As \ + * such, we don't need to emit another barrier here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_mb__after_atomic(); \ + \ + return result; \ } -#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n))) -#define atomic_xchg(v, new) (xchg(&((v)->counter), (new))) - -/* - * atomic_dec_if_positive - decrement by 1 if old value positive - * @v: pointer of type atomic_t - */ +ATOMIC_SIP_OP(atomic, int, subu, ll, sc) #define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v) #ifdef CONFIG_64BIT - -#define ATOMIC64_INIT(i) { (i) } - -/* - * atomic64_read - read atomic variable - * @v: pointer of type atomic64_t - * - */ -#define atomic64_read(v) READ_ONCE((v)->counter) - -/* - * atomic64_set - set atomic variable - * @v: pointer of type atomic64_t - * @i: required value - */ -#define atomic64_set(v, i) WRITE_ONCE((v)->counter, (i)) - -#define ATOMIC64_OP(op, c_op, asm_op) \ -static __inline__ void atomic64_##op(s64 i, atomic64_t * v) \ -{ \ - if (kernel_uses_llsc) { \ - s64 temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: lld %0, %1 # atomic64_" #op " \n" \ - " " #asm_op " %0, %2 \n" \ - " scd %0, %1 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " .set pop \n" \ - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ -} - -#define ATOMIC64_OP_RETURN(op, c_op, asm_op) \ -static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v) \ -{ \ - s64 result; \ - \ - if (kernel_uses_llsc) { \ - s64 temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: lld %1, %2 # atomic64_" #op "_return\n" \ - " " #asm_op " %0, %1, %3 \n" \ - " scd %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " " #asm_op " %0, %1, %3 \n" \ - " .set pop \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - result c_op i; \ - v->counter = result; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ -} - -#define ATOMIC64_FETCH_OP(op, c_op, asm_op) \ -static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v) \ -{ \ - s64 result; \ - \ - if (kernel_uses_llsc) { \ - s64 temp; \ - \ - loongson_llsc_mb(); \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set "MIPS_ISA_LEVEL" \n" \ - "1: lld %1, %2 # atomic64_fetch_" #op "\n" \ - " " #asm_op " %0, %1, %3 \n" \ - " scd %0, %2 \n" \ - "\t" __scbeqz " %0, 1b \n" \ - " move %0, %1 \n" \ - " .set pop \n" \ - : "=&r" (result), "=&r" (temp), \ - "+" GCC_OFF_SMALL_ASM() (v->counter) \ - : "Ir" (i) : __LLSC_CLOBBER); \ - } else { \ - unsigned long flags; \ - \ - raw_local_irq_save(flags); \ - result = v->counter; \ - v->counter c_op i; \ - raw_local_irq_restore(flags); \ - } \ - \ - return result; \ -} - -#define ATOMIC64_OPS(op, c_op, asm_op) \ - ATOMIC64_OP(op, c_op, asm_op) \ - ATOMIC64_OP_RETURN(op, c_op, asm_op) \ - ATOMIC64_FETCH_OP(op, c_op, asm_op) - -ATOMIC64_OPS(add, +=, daddu) -ATOMIC64_OPS(sub, -=, dsubu) - -#define atomic64_add_return_relaxed atomic64_add_return_relaxed -#define atomic64_sub_return_relaxed atomic64_sub_return_relaxed -#define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed -#define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed - -#undef ATOMIC64_OPS -#define ATOMIC64_OPS(op, c_op, asm_op) \ - ATOMIC64_OP(op, c_op, asm_op) \ - ATOMIC64_FETCH_OP(op, c_op, asm_op) - -ATOMIC64_OPS(and, &=, and) -ATOMIC64_OPS(or, |=, or) -ATOMIC64_OPS(xor, ^=, xor) - -#define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed -#define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed -#define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed - -#undef ATOMIC64_OPS -#undef ATOMIC64_FETCH_OP -#undef ATOMIC64_OP_RETURN -#undef ATOMIC64_OP - -/* - * atomic64_sub_if_positive - conditionally subtract integer from atomic - * variable - * @i: integer value to subtract - * @v: pointer of type atomic64_t - * - * Atomically test @v and subtract @i if @v is greater or equal than @i. - * The function returns the old value of @v minus @i. - */ -static __inline__ s64 atomic64_sub_if_positive(s64 i, atomic64_t * v) -{ - s64 result; - - smp_mb__before_llsc(); - - if (kernel_uses_llsc) { - s64 temp; - - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_LEVEL" \n" - "1: lld %1, %2 # atomic64_sub_if_positive\n" - " dsubu %0, %1, %3 \n" - " move %1, %0 \n" - " bltz %0, 1f \n" - " scd %1, %2 \n" - "\t" __scbeqz " %1, 1b \n" - "1: \n" - " .set pop \n" - : "=&r" (result), "=&r" (temp), - "+" GCC_OFF_SMALL_ASM() (v->counter) - : "Ir" (i)); - } else { - unsigned long flags; - - raw_local_irq_save(flags); - result = v->counter; - result -= i; - if (result >= 0) - v->counter = result; - raw_local_irq_restore(flags); - } - - smp_llsc_mb(); - - return result; -} - -#define atomic64_cmpxchg(v, o, n) \ - ((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n))) -#define atomic64_xchg(v, new) (xchg(&((v)->counter), (new))) - -/* - * atomic64_dec_if_positive - decrement by 1 if old value positive - * @v: pointer of type atomic64_t - */ +ATOMIC_SIP_OP(atomic64, s64, dsubu, lld, scd) #define atomic64_dec_if_positive(v) atomic64_sub_if_positive(1, v) +#endif -#endif /* CONFIG_64BIT */ +#undef ATOMIC_SIP_OP #endif /* _ASM_ATOMIC_H */ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index 9228f7386220..49ff172a72b9 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -9,131 +9,26 @@ #define __ASM_BARRIER_H #include <asm/addrspace.h> +#include <asm/sync.h> -/* - * Sync types defined by the MIPS architecture (document MD00087 table 6.5) - * These values are used with the sync instruction to perform memory barriers. - * Types of ordering guarantees available through the SYNC instruction: - * - Completion Barriers - * - Ordering Barriers - * As compared to the completion barrier, the ordering barrier is a - * lighter-weight operation as it does not require the specified instructions - * before the SYNC to be already completed. Instead it only requires that those - * specified instructions which are subsequent to the SYNC in the instruction - * stream are never re-ordered for processing ahead of the specified - * instructions which are before the SYNC in the instruction stream. - * This potentially reduces how many cycles the barrier instruction must stall - * before it completes. - * Implementations that do not use any of the non-zero values of stype to define - * different barriers, such as ordering barriers, must make those stype values - * act the same as stype zero. - */ - -/* - * Completion barriers: - * - Every synchronizable specified memory instruction (loads or stores or both) - * that occurs in the instruction stream before the SYNC instruction must be - * already globally performed before any synchronizable specified memory - * instructions that occur after the SYNC are allowed to be performed, with - * respect to any other processor or coherent I/O module. - * - * - The barrier does not guarantee the order in which instruction fetches are - * performed. - * - * - A stype value of zero will always be defined such that it performs the most - * complete set of synchronization operations that are defined.This means - * stype zero always does a completion barrier that affects both loads and - * stores preceding the SYNC instruction and both loads and stores that are - * subsequent to the SYNC instruction. Non-zero values of stype may be defined - * by the architecture or specific implementations to perform synchronization - * behaviors that are less complete than that of stype zero. If an - * implementation does not use one of these non-zero values to define a - * different synchronization behavior, then that non-zero value of stype must - * act the same as stype zero completion barrier. This allows software written - * for an implementation with a lighter-weight barrier to work on another - * implementation which only implements the stype zero completion barrier. - * - * - A completion barrier is required, potentially in conjunction with SSNOP (in - * Release 1 of the Architecture) or EHB (in Release 2 of the Architecture), - * to guarantee that memory reference results are visible across operating - * mode changes. For example, a completion barrier is required on some - * implementations on entry to and exit from Debug Mode to guarantee that - * memory effects are handled correctly. - */ - -/* - * stype 0 - A completion barrier that affects preceding loads and stores and - * subsequent loads and stores. - * Older instructions which must reach the load/store ordering point before the - * SYNC instruction completes: Loads, Stores - * Younger instructions which must reach the load/store ordering point only - * after the SYNC instruction completes: Loads, Stores - * Older instructions which must be globally performed when the SYNC instruction - * completes: Loads, Stores - */ -#define STYPE_SYNC 0x0 - -/* - * Ordering barriers: - * - Every synchronizable specified memory instruction (loads or stores or both) - * that occurs in the instruction stream before the SYNC instruction must - * reach a stage in the load/store datapath after which no instruction - * re-ordering is possible before any synchronizable specified memory - * instruction which occurs after the SYNC instruction in the instruction - * stream reaches the same stage in the load/store datapath. - * - * - If any memory instruction before the SYNC instruction in program order, - * generates a memory request to the external memory and any memory - * instruction after the SYNC instruction in program order also generates a - * memory request to external memory, the memory request belonging to the - * older instruction must be globally performed before the time the memory - * request belonging to the younger instruction is globally performed. - * - * - The barrier does not guarantee the order in which instruction fetches are - * performed. - */ +static inline void __sync(void) +{ + asm volatile(__SYNC(full, always) ::: "memory"); +} -/* - * stype 0x10 - An ordering barrier that affects preceding loads and stores and - * subsequent loads and stores. - * Older instructions which must reach the load/store ordering point before the - * SYNC instruction completes: Loads, Stores - * Younger instructions which must reach the load/store ordering point only - * after the SYNC instruction completes: Loads, Stores - * Older instructions which must be globally performed when the SYNC instruction - * completes: N/A - */ -#define STYPE_SYNC_MB 0x10 +static inline void rmb(void) +{ + asm volatile(__SYNC(rmb, always) ::: "memory"); +} +#define rmb rmb -/* - * stype 0x14 - A completion barrier specific to global invalidations - * - * When a sync instruction of this type completes any preceding GINVI or GINVT - * operation has been globalized & completed on all coherent CPUs. Anything - * that the GINV* instruction should invalidate will have been invalidated on - * all coherent CPUs when this instruction completes. It is implementation - * specific whether the GINV* instructions themselves will ensure completion, - * or this sync type will. - * - * In systems implementing global invalidates (ie. with Config5.GI == 2 or 3) - * this sync type also requires that previous SYNCI operations have completed. - */ -#define STYPE_GINV 0x14 +static inline void wmb(void) +{ + asm volatile(__SYNC(wmb, always) ::: "memory"); +} +#define wmb wmb -#ifdef CONFIG_CPU_HAS_SYNC -#define __sync() \ - __asm__ __volatile__( \ - ".set push\n\t" \ - ".set noreorder\n\t" \ - ".set mips2\n\t" \ - "sync\n\t" \ - ".set pop" \ - : /* no output */ \ - : /* no input */ \ - : "memory") -#else -#define __sync() do { } while(0) -#endif +#define fast_mb() __sync() #define __fast_iob() \ __asm__ __volatile__( \ @@ -146,17 +41,8 @@ : "m" (*(int *)CKSEG1) \ : "memory") #ifdef CONFIG_CPU_CAVIUM_OCTEON -# define OCTEON_SYNCW_STR ".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n" -# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory") - -# define fast_wmb() __syncw() -# define fast_rmb() barrier() -# define fast_mb() __sync() # define fast_iob() do { } while (0) #else /* ! CONFIG_CPU_CAVIUM_OCTEON */ -# define fast_wmb() __sync() -# define fast_rmb() __sync() -# define fast_mb() __sync() # ifdef CONFIG_SGI_IP28 # define fast_iob() \ __asm__ __volatile__( \ @@ -192,23 +78,14 @@ #endif /* !CONFIG_CPU_HAS_WB */ -#define wmb() fast_wmb() -#define rmb() fast_rmb() - #if defined(CONFIG_WEAK_ORDERING) -# ifdef CONFIG_CPU_CAVIUM_OCTEON -# define __smp_mb() __sync() -# define __smp_rmb() barrier() -# define __smp_wmb() __syncw() -# else -# define __smp_mb() __asm__ __volatile__("sync" : : :"memory") -# define __smp_rmb() __asm__ __volatile__("sync" : : :"memory") -# define __smp_wmb() __asm__ __volatile__("sync" : : :"memory") -# endif +# define __smp_mb() __sync() +# define __smp_rmb() rmb() +# define __smp_wmb() wmb() #else -#define __smp_mb() barrier() -#define __smp_rmb() barrier() -#define __smp_wmb() barrier() +# define __smp_mb() barrier() +# define __smp_rmb() barrier() +# define __smp_wmb() barrier() #endif /* @@ -218,13 +95,14 @@ * ordering will be done by smp_llsc_mb() and friends. */ #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) -#define __WEAK_LLSC_MB " sync \n" -#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") -#define __LLSC_CLOBBER +# define __WEAK_LLSC_MB sync +# define smp_llsc_mb() \ + __asm__ __volatile__(__stringify(__WEAK_LLSC_MB) : : :"memory") +# define __LLSC_CLOBBER #else -#define __WEAK_LLSC_MB " \n" -#define smp_llsc_mb() do { } while (0) -#define __LLSC_CLOBBER "memory" +# define __WEAK_LLSC_MB +# define smp_llsc_mb() do { } while (0) +# define __LLSC_CLOBBER "memory" #endif #ifdef CONFIG_CPU_CAVIUM_OCTEON @@ -241,52 +119,22 @@ #define nudge_writes() mb() #endif -#define __smp_mb__before_atomic() __smp_mb__before_llsc() -#define __smp_mb__after_atomic() smp_llsc_mb() - /* - * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load, - * store or prefetch) in between an LL & SC can cause the SC instruction to - * erroneously succeed, breaking atomicity. Whilst it's unusual to write code - * containing such sequences, this bug bites harder than we might otherwise - * expect due to reordering & speculation: - * - * 1) A memory access appearing prior to the LL in program order may actually - * be executed after the LL - this is the reordering case. - * - * In order to avoid this we need to place a memory barrier (ie. a SYNC - * instruction) prior to every LL instruction, in between it and any earlier - * memory access instructions. - * - * This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later. - * - * 2) If a conditional branch exists between an LL & SC with a target outside - * of the LL-SC loop, for example an exit upon value mismatch in cmpxchg() - * or similar, then misprediction of the branch may allow speculative - * execution of memory accesses from outside of the LL-SC loop. - * - * In order to avoid this we need a memory barrier (ie. a SYNC instruction) - * at each affected branch target, for which we also use loongson_llsc_mb() - * defined below. - * - * This case affects all current Loongson 3 CPUs. - * - * The above described cases cause an error in the cache coherence protocol; - * such that the Invalidate of a competing LL-SC goes 'missing' and SC - * erroneously observes its core still has Exclusive state and lets the SC - * proceed. - * - * Therefore the error only occurs on SMP systems. + * In the Loongson3 LL/SC workaround case, all of our LL/SC loops already have + * a completion barrier immediately preceding the LL instruction. Therefore we + * can skip emitting a barrier from __smp_mb__before_atomic(). */ -#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS /* Loongson-3's LLSC workaround */ -#define loongson_llsc_mb() __asm__ __volatile__("sync" : : :"memory") +#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS +# define __smp_mb__before_atomic() #else -#define loongson_llsc_mb() do { } while (0) +# define __smp_mb__before_atomic() __smp_mb__before_llsc() #endif +#define __smp_mb__after_atomic() smp_llsc_mb() + static inline void sync_ginv(void) { - asm volatile("sync\t%0" :: "i"(STYPE_GINV)); + asm volatile(__SYNC(ginv, always)); } #include <asm-generic/barrier.h> diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 985d6a02f9ea..a74769940fbd 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -13,16 +13,55 @@ #error only <linux/bitops.h> can be included directly #endif +#include <linux/bits.h> #include <linux/compiler.h> #include <linux/types.h> #include <asm/barrier.h> #include <asm/byteorder.h> /* sigh ... */ #include <asm/compiler.h> #include <asm/cpu-features.h> +#include <asm/isa-rev.h> #include <asm/llsc.h> #include <asm/sgidefs.h> #include <asm/war.h> +#define __bit_op(mem, insn, inputs...) do { \ + unsigned long temp; \ + \ + asm volatile( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " __LL "%0, %1 \n" \ + " " insn " \n" \ + " " __SC "%0, %1 \n" \ + " " __SC_BEQZ "%0, 1b \n" \ + " .set pop \n" \ + : "=&r"(temp), "+" GCC_OFF_SMALL_ASM()(mem) \ + : inputs \ + : __LLSC_CLOBBER); \ +} while (0) + +#define __test_bit_op(mem, ll_dst, insn, inputs...) ({ \ + unsigned long orig, temp; \ + \ + asm volatile( \ + " .set push \n" \ + " .set " MIPS_ISA_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ + "1: " __LL ll_dst ", %2 \n" \ + " " insn " \n" \ + " " __SC "%1, %2 \n" \ + " " __SC_BEQZ "%1, 1b \n" \ + " .set pop \n" \ + : "=&r"(orig), "=&r"(temp), \ + "+" GCC_OFF_SMALL_ASM()(mem) \ + : inputs \ + : __LLSC_CLOBBER); \ + \ + orig; \ +}) + /* * These are the "slower" versions of the functions and are in bitops.c. * These functions call raw_local_irq_{save,restore}(). @@ -30,8 +69,6 @@ void __mips_set_bit(unsigned long nr, volatile unsigned long *addr); void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr); void __mips_change_bit(unsigned long nr, volatile unsigned long *addr); -int __mips_test_and_set_bit(unsigned long nr, - volatile unsigned long *addr); int __mips_test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr); int __mips_test_and_clear_bit(unsigned long nr, @@ -52,51 +89,20 @@ int __mips_test_and_change_bit(unsigned long nr, */ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - int bit = nr & SZLONG_MASK; - unsigned long temp; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; - if (kernel_uses_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # set_bit \n" - " or %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set pop \n" - : "=&r" (temp), "=" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit), GCC_OFF_SMALL_ASM() (*m) - : __LLSC_CLOBBER); -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) - } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " " __LL "%0, %1 # set_bit \n" - " " __INS "%0, %3, %2, 1 \n" - " " __SC "%0, %1 \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (bit), "r" (~0) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); -#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */ - } else if (kernel_uses_llsc) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # set_bit \n" - " or %0, %2 \n" - " " __SC "%0, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); - } else + if (!kernel_uses_llsc) { __mips_set_bit(nr, addr); + return; + } + + if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit) && (bit >= 16)) { + __bit_op(*m, __INS "%0, %3, %2, 1", "i"(bit), "r"(~0)); + return; + } + + __bit_op(*m, "or\t%0, %2", "ir"(BIT(bit))); } /* @@ -111,51 +117,20 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr) */ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - int bit = nr & SZLONG_MASK; - unsigned long temp; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; - if (kernel_uses_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # clear_bit \n" - " and %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (~(1UL << bit)) - : __LLSC_CLOBBER); -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) - } else if (kernel_uses_llsc && __builtin_constant_p(bit)) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " " __LL "%0, %1 # clear_bit \n" - " " __INS "%0, $0, %2, 1 \n" - " " __SC "%0, %1 \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); -#endif /* CONFIG_CPU_MIPSR2 || CONFIG_CPU_MIPSR6 */ - } else if (kernel_uses_llsc) { - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # clear_bit \n" - " and %0, %2 \n" - " " __SC "%0, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (~(1UL << bit)) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); - } else + if (!kernel_uses_llsc) { __mips_clear_bit(nr, addr); + return; + } + + if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(bit)) { + __bit_op(*m, __INS "%0, $0, %2, 1", "i"(bit)); + return; + } + + __bit_op(*m, "and\t%0, %2", "ir"(~BIT(bit))); } /* @@ -183,159 +158,61 @@ static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *ad */ static inline void change_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # change_bit \n" - " xor %0, %2 \n" - " " __SC "%0, %1 \n" - " beqzl %0, 1b \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # change_bit \n" - " xor %0, %2 \n" - " " __SC "%0, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m) - : "ir" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); - } else + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + + if (!kernel_uses_llsc) { __mips_change_bit(nr, addr); + return; + } + + __bit_op(*m, "xor\t%0, %2", "ir"(BIT(bit))); } /* - * test_and_set_bit - Set a bit and return its old value + * test_and_set_bit_lock - Set a bit and return its old value * @nr: Bit to set * @addr: Address to count from * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. + * This operation is atomic and implies acquire ordering semantics + * after the memory operation. */ -static inline int test_and_set_bit(unsigned long nr, +static inline int test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + unsigned long res, orig; - smp_mb__before_llsc(); - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else - res = __mips_test_and_set_bit(nr, addr); + if (!kernel_uses_llsc) { + res = __mips_test_and_set_bit_lock(nr, addr); + } else { + orig = __test_bit_op(*m, "%0", + "or\t%1, %0, %3", + "ir"(BIT(bit))); + res = (orig & BIT(bit)) != 0; + } smp_llsc_mb(); - return res != 0; + return res; } /* - * test_and_set_bit_lock - Set a bit and return its old value + * test_and_set_bit - Set a bit and return its old value * @nr: Bit to set * @addr: Address to count from * - * This operation is atomic and implies acquire ordering semantics - * after the memory operation. + * This operation is atomic and cannot be reordered. + * It also implies a memory barrier. */ -static inline int test_and_set_bit_lock(unsigned long nr, +static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+m" (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_set_bit \n" - " or %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else - res = __mips_test_and_set_bit_lock(nr, addr); - - smp_llsc_mb(); - - return res != 0; + smp_mb__before_atomic(); + return test_and_set_bit_lock(nr, addr); } + /* * test_and_clear_bit - Clear a bit and return its old value * @nr: Bit to clear @@ -347,71 +224,30 @@ static inline int test_and_set_bit_lock(unsigned long nr, static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; - - smp_mb__before_llsc(); + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + unsigned long res, orig; - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; + smp_mb__before_atomic(); - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_clear_bit \n" - " or %2, %0, %3 \n" - " xor %2, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6) - } else if (kernel_uses_llsc && __builtin_constant_p(nr)) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " " __LL "%0, %1 # test_and_clear_bit \n" - " " __EXT "%2, %0, %3, 1 \n" - " " __INS "%0, $0, %3, 1 \n" - " " __SC "%0, %1 \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "ir" (bit) - : __LLSC_CLOBBER); - } while (unlikely(!temp)); -#endif - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_clear_bit \n" - " or %2, %0, %3 \n" - " xor %2, %3 \n" - " " __SC "%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else + if (!kernel_uses_llsc) { res = __mips_test_and_clear_bit(nr, addr); + } else if ((MIPS_ISA_REV >= 2) && __builtin_constant_p(nr)) { + res = __test_bit_op(*m, "%1", + __EXT "%0, %1, %3, 1;" + __INS "%1, $0, %3, 1", + "i"(bit)); + } else { + orig = __test_bit_op(*m, "%0", + "or\t%1, %0, %3;" + "xor\t%1, %1, %3", + "ir"(BIT(bit))); + res = (orig & BIT(bit)) != 0; + } smp_llsc_mb(); - return res != 0; + return res; } /* @@ -425,54 +261,29 @@ static inline int test_and_clear_bit(unsigned long nr, static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - int bit = nr & SZLONG_MASK; - unsigned long res; + volatile unsigned long *m = &addr[BIT_WORD(nr)]; + int bit = nr % BITS_PER_LONG; + unsigned long res, orig; - smp_mb__before_llsc(); - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; + smp_mb__before_atomic(); - __asm__ __volatile__( - " .set push \n" - " .set arch=r4000 \n" - "1: " __LL "%0, %1 # test_and_change_bit \n" - " xor %2, %0, %3 \n" - " " __SC "%2, %1 \n" - " beqzl %2, 1b \n" - " and %2, %0, %3 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } else if (kernel_uses_llsc) { - unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); - unsigned long temp; - - loongson_llsc_mb(); - do { - __asm__ __volatile__( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " " __LL "%0, %1 # test_and_change_bit \n" - " xor %2, %0, %3 \n" - " " __SC "\t%2, %1 \n" - " .set pop \n" - : "=&r" (temp), "+" GCC_OFF_SMALL_ASM() (*m), "=&r" (res) - : "r" (1UL << bit) - : __LLSC_CLOBBER); - } while (unlikely(!res)); - - res = temp & (1UL << bit); - } else + if (!kernel_uses_llsc) { res = __mips_test_and_change_bit(nr, addr); + } else { + orig = __test_bit_op(*m, "%0", + "xor\t%1, %0, %3", + "ir"(BIT(bit))); + res = (orig & BIT(bit)) != 0; + } smp_llsc_mb(); - return res != 0; + return res; } +#undef __bit_op +#undef __test_bit_op + #include <asm-generic/bitops/non-atomic.h> /* diff --git a/arch/mips/include/asm/bootinfo.h b/arch/mips/include/asm/bootinfo.h index 34d62229dea5..d41a5057bc69 100644 --- a/arch/mips/include/asm/bootinfo.h +++ b/arch/mips/include/asm/bootinfo.h @@ -61,7 +61,7 @@ /* * Valid machtype for Loongson family */ -enum loongson_machine_type { +enum loongson2ef_machine_type { MACH_LOONGSON_UNKNOWN, MACH_LEMOTE_FL2E, MACH_LEMOTE_FL2F, @@ -70,7 +70,6 @@ enum loongson_machine_type { MACH_DEXXON_GDIUM2F10, MACH_LEMOTE_NAS, MACH_LEMOTE_LL2F, - MACH_LOONGSON_GENERIC, MACH_LOONGSON_END }; @@ -99,6 +98,7 @@ extern void detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_ad extern void prom_init(void); extern void prom_free_prom_memory(void); +extern void prom_cleanup(void); extern void free_init_pages(const char *what, unsigned long begin, unsigned long end); diff --git a/arch/mips/include/asm/bugs.h b/arch/mips/include/asm/bugs.h index d8ab8b7129b5..d72dc6e1cf3c 100644 --- a/arch/mips/include/asm/bugs.h +++ b/arch/mips/include/asm/bugs.h @@ -26,9 +26,8 @@ extern void check_bugs64(void); static inline void check_bugs_early(void) { -#ifdef CONFIG_64BIT - check_bugs64_early(); -#endif + if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + check_bugs64_early(); } static inline void check_bugs(void) @@ -37,19 +36,18 @@ static inline void check_bugs(void) cpu_data[cpu].udelay_val = loops_per_jiffy; check_bugs32(); -#ifdef CONFIG_64BIT - check_bugs64(); -#endif + + if (IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + check_bugs64(); } static inline int r4k_daddiu_bug(void) { -#ifdef CONFIG_64BIT + if (!IS_ENABLED(CONFIG_CPU_R4X00_BUGS64)) + return 0; + WARN_ON(daddiu_bug < 0); return daddiu_bug != 0; -#else - return 0; -#endif } #endif /* _ASM_BUGS_H */ diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index f6136871561d..5b0b3a6777ea 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -11,20 +11,11 @@ #include <linux/bug.h> #include <linux/irqflags.h> #include <asm/compiler.h> +#include <asm/llsc.h> +#include <asm/sync.h> #include <asm/war.h> /* - * Using a branch-likely instruction to check the result of an sc instruction - * works around a bug present in R10000 CPUs prior to revision 3.0 that could - * cause ll-sc sequences to execute non-atomically. - */ -#if R10000_LLSC_WAR -# define __scbeqz "beqzl" -#else -# define __scbeqz "beqz" -#endif - -/* * These functions doesn't exist, so if they are called you'll either: * * - Get an error at compile-time due to __compiletime_error, if supported by @@ -46,18 +37,18 @@ extern unsigned long __xchg_called_with_bad_pointer(void) __typeof(*(m)) __ret; \ \ if (kernel_uses_llsc) { \ - loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set push \n" \ " .set " MIPS_ISA_ARCH_LEVEL " \n" \ + " " __SYNC(full, loongson3_war) " \n" \ "1: " ld " %0, %2 # __xchg_asm \n" \ " .set pop \n" \ " move $1, %z3 \n" \ " .set " MIPS_ISA_ARCH_LEVEL " \n" \ " " st " $1, %1 \n" \ - "\t" __scbeqz " $1, 1b \n" \ + "\t" __SC_BEQZ "$1, 1b \n" \ " .set pop \n" \ : "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \ : GCC_OFF_SMALL_ASM() (*m), "Jr" (val) \ @@ -103,7 +94,13 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size) ({ \ __typeof__(*(ptr)) __res; \ \ - smp_mb__before_llsc(); \ + /* \ + * In the Loongson3 workaround case __xchg_asm() already \ + * contains a completion barrier prior to the LL, so we don't \ + * need to emit an extra one here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_mb__before_llsc(); \ \ __res = (__typeof__(*(ptr))) \ __xchg((ptr), (unsigned long)(x), sizeof(*(ptr))); \ @@ -118,25 +115,24 @@ unsigned long __xchg(volatile void *ptr, unsigned long x, int size) __typeof(*(m)) __ret; \ \ if (kernel_uses_llsc) { \ - loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set push \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ + " " __SYNC(full, loongson3_war) " \n" \ "1: " ld " %0, %2 # __cmpxchg_asm \n" \ " bne %0, %z3, 2f \n" \ " .set pop \n" \ " move $1, %z4 \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ " " st " $1, %1 \n" \ - "\t" __scbeqz " $1, 1b \n" \ + "\t" __SC_BEQZ "$1, 1b \n" \ " .set pop \n" \ - "2: \n" \ + "2: " __SYNC(full, loongson3_war) " \n" \ : "=&r" (__ret), "=" GCC_OFF_SMALL_ASM() (*m) \ : GCC_OFF_SMALL_ASM() (*m), "Jr" (old), "Jr" (new) \ : __LLSC_CLOBBER); \ - loongson_llsc_mb(); \ } else { \ unsigned long __flags; \ \ @@ -190,9 +186,23 @@ unsigned long __cmpxchg(volatile void *ptr, unsigned long old, ({ \ __typeof__(*(ptr)) __res; \ \ - smp_mb__before_llsc(); \ + /* \ + * In the Loongson3 workaround case __cmpxchg_asm() already \ + * contains a completion barrier prior to the LL, so we don't \ + * need to emit an extra one here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_mb__before_llsc(); \ + \ __res = cmpxchg_local((ptr), (old), (new)); \ - smp_llsc_mb(); \ + \ + /* \ + * In the Loongson3 workaround case __cmpxchg_asm() already \ + * contains a completion barrier after the SC, so we don't \ + * need to emit an extra one here. \ + */ \ + if (!__SYNC_loongson3_war) \ + smp_llsc_mb(); \ \ __res; \ }) @@ -233,11 +243,11 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, */ local_irq_save(flags); - loongson_llsc_mb(); asm volatile( " .set push \n" " .set " MIPS_ISA_ARCH_LEVEL " \n" /* Load 64 bits from ptr */ + " " __SYNC(full, loongson3_war) " \n" "1: lld %L0, %3 # __cmpxchg64 \n" /* * Split the 64 bit value we loaded into the 2 registers that hold the @@ -269,9 +279,9 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, /* Attempt to store new at ptr */ " scd %L1, %2 \n" /* If we failed, loop! */ - "\t" __scbeqz " %L1, 1b \n" + "\t" __SC_BEQZ "%L1, 1b \n" " .set pop \n" - "2: \n" + "2: " __SYNC(full, loongson3_war) " \n" : "=&r"(ret), "=&r"(tmp), "=" GCC_OFF_SMALL_ASM() (*(unsigned long long *)ptr) @@ -279,7 +289,6 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, "r" (old), "r" (new) : "memory"); - loongson_llsc_mb(); local_irq_restore(flags); return ret; @@ -312,6 +321,4 @@ static inline unsigned long __cmpxchg64(volatile void *ptr, # endif /* !CONFIG_SMP */ #endif /* !CONFIG_64BIT */ -#undef __scbeqz - #endif /* __ASM_CMPXCHG_H */ diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h index 63b3468ede4c..6b7396a6a115 100644 --- a/arch/mips/include/asm/cop2.h +++ b/arch/mips/include/asm/cop2.h @@ -33,7 +33,7 @@ extern void nlm_cop2_restore(struct nlm_cop2_state *); #define cop2_present 1 #define cop2_lazy_restore 0 -#elif defined(CONFIG_CPU_LOONGSON3) +#elif defined(CONFIG_CPU_LOONGSON64) #define cop2_present 1 #define cop2_lazy_restore 1 diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h index 7bbb66760a07..5117e9119b87 100644 --- a/arch/mips/include/asm/cpu-type.h +++ b/arch/mips/include/asm/cpu-type.h @@ -15,13 +15,12 @@ static inline int __pure __get_cpu_type(const int cpu_type) { switch (cpu_type) { -#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \ - defined(CONFIG_SYS_HAS_CPU_LOONGSON2F) - case CPU_LOONGSON2: +#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2EF) + case CPU_LOONGSON2EF: #endif -#ifdef CONFIG_SYS_HAS_CPU_LOONGSON3 - case CPU_LOONGSON3: +#ifdef CONFIG_SYS_HAS_CPU_LOONGSON64 + case CPU_LOONGSON64: #endif #if defined(CONFIG_SYS_HAS_CPU_LOONGSON1B) || \ diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 7fddcb8350c6..0e3a8d4de09d 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -91,7 +91,9 @@ #define PRID_IMP_LOONGSON_32 0x4200 /* Loongson-1 */ #define PRID_IMP_R5432 0x5400 #define PRID_IMP_R5500 0x5500 -#define PRID_IMP_LOONGSON_64 0x6300 /* Loongson-2/3 */ +#define PRID_IMP_LOONGSON_64R 0x6100 /* Reduced Loongson-2 */ +#define PRID_IMP_LOONGSON_64C 0x6300 /* Classic Loongson-2 and Loongson-3 */ +#define PRID_IMP_LOONGSON_64G 0xc000 /* Generic Loongson-2 and Loongson-3 */ #define PRID_IMP_UNKNOWN 0xff00 @@ -317,8 +319,8 @@ enum cpu_type_enum { /* * MIPS64 class processors */ - CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, - CPU_LOONGSON3, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, + CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2EF, + CPU_LOONGSON64, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, CPU_CAVIUM_OCTEON3, CPU_XLR, CPU_XLP, CPU_I6500, CPU_QEMU_GENERIC, diff --git a/arch/mips/include/asm/futex.h b/arch/mips/include/asm/futex.h index b83b0397462d..110220705e97 100644 --- a/arch/mips/include/asm/futex.h +++ b/arch/mips/include/asm/futex.h @@ -16,6 +16,7 @@ #include <asm/barrier.h> #include <asm/compiler.h> #include <asm/errno.h> +#include <asm/sync.h> #include <asm/war.h> #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ @@ -32,7 +33,7 @@ " .set arch=r4000 \n" \ "2: sc $1, %2 \n" \ " beqzl $1, 1b \n" \ - __WEAK_LLSC_MB \ + __stringify(__WEAK_LLSC_MB) " \n" \ "3: \n" \ " .insn \n" \ " .set pop \n" \ @@ -50,19 +51,19 @@ "i" (-EFAULT) \ : "memory"); \ } else if (cpu_has_llsc) { \ - loongson_llsc_mb(); \ __asm__ __volatile__( \ " .set push \n" \ " .set noat \n" \ " .set push \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ + " " __SYNC(full, loongson3_war) " \n" \ "1: "user_ll("%1", "%4")" # __futex_atomic_op\n" \ " .set pop \n" \ " " insn " \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ "2: "user_sc("$1", "%2")" \n" \ " beqz $1, 1b \n" \ - __WEAK_LLSC_MB \ + __stringify(__WEAK_LLSC_MB) " \n" \ "3: \n" \ " .insn \n" \ " .set pop \n" \ @@ -147,7 +148,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .set arch=r4000 \n" "2: sc $1, %2 \n" " beqzl $1, 1b \n" - __WEAK_LLSC_MB + __stringify(__WEAK_LLSC_MB) " \n" "3: \n" " .insn \n" " .set pop \n" @@ -164,13 +165,13 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, "i" (-EFAULT) : "memory"); } else if (cpu_has_llsc) { - loongson_llsc_mb(); __asm__ __volatile__( "# futex_atomic_cmpxchg_inatomic \n" " .set push \n" " .set noat \n" " .set push \n" " .set "MIPS_ISA_ARCH_LEVEL" \n" + " " __SYNC(full, loongson3_war) " \n" "1: "user_ll("%1", "%3")" \n" " bne %1, %z4, 3f \n" " .set pop \n" @@ -178,8 +179,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, " .set "MIPS_ISA_ARCH_LEVEL" \n" "2: "user_sc("$1", "%2")" \n" " beqz $1, 1b \n" - __WEAK_LLSC_MB - "3: \n" + "3: " __SYNC_ELSE(full, loongson3_war, __WEAK_LLSC_MB) "\n" " .insn \n" " .set pop \n" " .section .fixup,\"ax\" \n" @@ -194,7 +194,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : GCC_OFF_SMALL_ASM() (*uaddr), "Jr" (oldval), "Jr" (newval), "i" (-EFAULT) : "memory"); - loongson_llsc_mb(); } else return -ENOSYS; diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h index 0fa27446869a..ea6a8c4b49f3 100644 --- a/arch/mips/include/asm/hazards.h +++ b/arch/mips/include/asm/hazards.h @@ -23,7 +23,7 @@ * TLB hazards */ #if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR6)) && \ - !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_LOONGSON3_ENHANCEMENT) + !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_LOONGSON64_ENHANCEMENT) /* * MIPSR2 defines ehb for hazard avoidance @@ -158,7 +158,7 @@ do { \ } while (0) #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ - defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_LOONGSON3_ENHANCEMENT) || \ + defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_LOONGSON64_ENHANCEMENT) || \ defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) || defined(CONFIG_CPU_XLR) /* diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 2b7b56736372..3f6ce74335b4 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -306,7 +306,7 @@ static inline void iounmap(const volatile void __iomem *addr) #undef __IS_KSEG1 } -#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_CAVIUM_OCTEON) || defined(CONFIG_CPU_LOONGSON64) #define war_io_reorder_wmb() wmb() #else #define war_io_reorder_wmb() barrier() diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index f0b862a83816..4d742acf2be0 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -41,7 +41,7 @@ static inline unsigned long arch_local_irq_save(void) " .set push \n" " .set reorder \n" " .set noat \n" -#if defined(CONFIG_CPU_LOONGSON3) || defined (CONFIG_CPU_LOONGSON1) +#if defined(CONFIG_CPU_LOONGSON64) || defined (CONFIG_CPU_LOONGSON1) " mfc0 %[flags], $12 \n" " di \n" #else diff --git a/arch/mips/include/asm/llsc.h b/arch/mips/include/asm/llsc.h index c6d17d171147..c49738bc3bda 100644 --- a/arch/mips/include/asm/llsc.h +++ b/arch/mips/include/asm/llsc.h @@ -9,20 +9,31 @@ #ifndef __ASM_LLSC_H #define __ASM_LLSC_H +#include <asm/isa-rev.h> + #if _MIPS_SZLONG == 32 -#define SZLONG_LOG 5 -#define SZLONG_MASK 31UL #define __LL "ll " #define __SC "sc " #define __INS "ins " #define __EXT "ext " #elif _MIPS_SZLONG == 64 -#define SZLONG_LOG 6 -#define SZLONG_MASK 63UL #define __LL "lld " #define __SC "scd " #define __INS "dins " #define __EXT "dext " #endif +/* + * Using a branch-likely instruction to check the result of an sc instruction + * works around a bug present in R10000 CPUs prior to revision 3.0 that could + * cause ll-sc sequences to execute non-atomically. + */ +#if R10000_LLSC_WAR +# define __SC_BEQZ "beqzl " +#elif MIPS_ISA_REV >= 6 +# define __SC_BEQZ "beqzc " +#else +# define __SC_BEQZ "beqz " +#endif + #endif /* __ASM_LLSC_H */ diff --git a/arch/mips/include/asm/mach-ip22/spaces.h b/arch/mips/include/asm/mach-ip22/spaces.h index 7f9fa6f66059..24fe92cb5313 100644 --- a/arch/mips/include/asm/mach-ip22/spaces.h +++ b/arch/mips/include/asm/mach-ip22/spaces.h @@ -10,17 +10,7 @@ #ifndef _ASM_MACH_IP22_SPACES_H #define _ASM_MACH_IP22_SPACES_H - -#ifdef CONFIG_64BIT - -#define PAGE_OFFSET 0xffffffff80000000UL - -#define CAC_BASE 0xffffffff80000000 -#define IO_BASE 0xffffffffa0000000 -#define UNCAC_BASE 0xffffffffa0000000 -#define MAP_BASE 0xc000000000000000 - -#endif /* CONFIG_64BIT */ +#define PHYS_OFFSET _AC(0x08000000, UL) #include <asm/mach-generic/spaces.h> diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h index 1cd6a23a84f2..f463826515df 100644 --- a/arch/mips/include/asm/mach-ip27/mmzone.h +++ b/arch/mips/include/asm/mach-ip27/mmzone.h @@ -6,7 +6,7 @@ #include <asm/sn/arch.h> #include <asm/sn/hub.h> -#define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) +#define pa_to_nid(addr) NASID_GET(addr) struct hub_data { kern_vars_t kern_vars; diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index 965f0793a5f9..be61ddcdacab 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -7,14 +7,13 @@ #include <asm/mmzone.h> struct cpuinfo_ip27 { - cnodeid_t p_nodeid; /* my node ID in compact-id-space */ nasid_t p_nasid; /* my node ID in numa-as-id-space */ unsigned char p_slice; /* Physical position on node board */ }; extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; -#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid) +#define cpu_to_node(cpu) (cputonasid(cpu)) #define cpumask_of_node(node) ((node) == -1 ? \ cpu_all_mask : \ &hub_data(node)->h_cpus) @@ -23,7 +22,7 @@ extern int pcibus_to_node(struct pci_bus *); #define cpumask_of_pcibus(bus) (cpumask_of_node(pcibus_to_node(bus))) -extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; +extern unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; #define node_distance(from, to) (__node_distances[(from)][(to)]) diff --git a/arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h new file mode 100644 index 000000000000..b2ee859ca0b7 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/cpu-feature-overrides.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com> + * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca> + * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org> + * + * reference: /proc/cpuinfo, + * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy), + * arch/mips/kernel/proc.c(show_cpuinfo), + * loongson2f user manual. + */ + +#ifndef __ASM_MACH_LOONGSON2EF_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_LOONGSON2EF_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_32fpr 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_4kex 1 +#define cpu_has_64bits 1 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_counter 1 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) +#define cpu_has_divec 0 +#define cpu_has_ejtag 0 +#define cpu_has_inclusive_pcaches 1 +#define cpu_has_llsc 1 +#define cpu_has_mcheck 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips16 0 +#define cpu_has_mips16e2 0 +#define cpu_has_mips3d 0 +#define cpu_has_mipsmt 0 +#define cpu_has_smartmips 0 +#define cpu_has_tlb 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_vce 0 +#define cpu_has_veic 0 +#define cpu_has_vint 0 +#define cpu_has_vtag_icache 0 +#define cpu_has_watch 1 + +#endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536.h index 9795b3361532..9795b3361532 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536.h diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_mfgpt.h index 52e8bb0fc04d..52e8bb0fc04d 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_mfgpt.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_mfgpt.h diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h index a0d4b752899e..a0d4b752899e 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_pci.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_pci.h diff --git a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_vsm.h index 70d0153cccc3..70d0153cccc3 100644 --- a/arch/mips/include/asm/mach-loongson64/cs5536/cs5536_vsm.h +++ b/arch/mips/include/asm/mach-loongson2ef/cs5536/cs5536_vsm.h diff --git a/arch/mips/include/asm/mach-loongson2ef/loongson.h b/arch/mips/include/asm/mach-loongson2ef/loongson.h new file mode 100644 index 000000000000..8ed460a64d10 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/loongson.h @@ -0,0 +1,328 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + */ + +#ifndef __ASM_MACH_LOONGSON2EF_LOONGSON_H +#define __ASM_MACH_LOONGSON2EF_LOONGSON_H + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/irq.h> + +/* loongson internal northbridge initialization */ +extern void bonito_irq_init(void); + +/* machine-specific reboot/halt operation */ +extern void mach_prepare_reboot(void); +extern void mach_prepare_shutdown(void); + +/* environment arguments from bootloader */ +extern u32 cpu_clock_freq; +extern u32 memsize, highmemsize; +extern const struct plat_smp_ops loongson3_smp_ops; + +/* loongson-specific command line, env and memory initialization */ +extern void __init prom_init_memory(void); +extern void __init prom_init_cmdline(void); +extern void __init prom_init_machtype(void); +extern void __init prom_init_env(void); +#ifdef CONFIG_LOONGSON_UART_BASE +extern unsigned long _loongson_uart_base, loongson_uart_base; +extern void prom_init_loongson_uart_base(void); +#endif + +static inline void prom_init_uart_base(void) +{ +#ifdef CONFIG_LOONGSON_UART_BASE + prom_init_loongson_uart_base(); +#endif +} + +/* irq operation functions */ +extern void bonito_irqdispatch(void); +extern void __init bonito_irq_init(void); +extern void __init mach_init_irq(void); +extern void mach_irq_dispatch(unsigned int pending); +extern int mach_i8259_irq(void); + +/* We need this in some places... */ +#define delay() ({ \ + int x; \ + for (x = 0; x < 100000; x++) \ + __asm__ __volatile__(""); \ +}) + +#define LOONGSON_REG(x) \ + (*(volatile u32 *)((char *)CKSEG1ADDR(LOONGSON_REG_BASE) + (x))) + +#define LOONGSON_IRQ_BASE 32 +#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ + +#include <linux/interrupt.h> +static inline void do_perfcnt_IRQ(void) +{ +#if IS_ENABLED(CONFIG_OPROFILE) + do_IRQ(LOONGSON2_PERFCNT_IRQ); +#endif +} + +#define LOONGSON_FLASH_BASE 0x1c000000 +#define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ +#define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) + +#define LOONGSON_LIO0_BASE 0x1e000000 +#define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */ +#define LOONGSON_LIO0_TOP (LOONGSON_LIO0_BASE+LOONGSON_LIO0_SIZE-1) + +#define LOONGSON_BOOT_BASE 0x1fc00000 +#define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */ +#define LOONGSON_BOOT_TOP (LOONGSON_BOOT_BASE+LOONGSON_BOOT_SIZE-1) +#define LOONGSON_REG_BASE 0x1fe00000 +#define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */ +#define LOONGSON_REG_TOP (LOONGSON_REG_BASE+LOONGSON_REG_SIZE-1) + +#define LOONGSON_LIO1_BASE 0x1ff00000 +#define LOONGSON_LIO1_SIZE 0x00100000 /* 1M */ +#define LOONGSON_LIO1_TOP (LOONGSON_LIO1_BASE+LOONGSON_LIO1_SIZE-1) + +#define LOONGSON_PCILO0_BASE 0x10000000 +#define LOONGSON_PCILO1_BASE 0x14000000 +#define LOONGSON_PCILO2_BASE 0x18000000 +#define LOONGSON_PCILO_BASE LOONGSON_PCILO0_BASE +#define LOONGSON_PCILO_SIZE 0x0c000000 /* 64M * 3 */ +#define LOONGSON_PCILO_TOP (LOONGSON_PCILO0_BASE+LOONGSON_PCILO_SIZE-1) + +#define LOONGSON_PCICFG_BASE 0x1fe80000 +#define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ +#define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) +#define LOONGSON_PCIIO_BASE 0x1fd00000 + +#define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ +#define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) + +/* Loongson Register Bases */ + +#define LOONGSON_PCICONFIGBASE 0x00 +#define LOONGSON_REGBASE 0x100 + +/* PCI Configuration Registers */ + +#define LOONGSON_PCI_REG(x) LOONGSON_REG(LOONGSON_PCICONFIGBASE + (x)) +#define LOONGSON_PCIDID LOONGSON_PCI_REG(0x00) +#define LOONGSON_PCICMD LOONGSON_PCI_REG(0x04) +#define LOONGSON_PCICLASS LOONGSON_PCI_REG(0x08) +#define LOONGSON_PCILTIMER LOONGSON_PCI_REG(0x0c) +#define LOONGSON_PCIBASE0 LOONGSON_PCI_REG(0x10) +#define LOONGSON_PCIBASE1 LOONGSON_PCI_REG(0x14) +#define LOONGSON_PCIBASE2 LOONGSON_PCI_REG(0x18) +#define LOONGSON_PCIBASE3 LOONGSON_PCI_REG(0x1c) +#define LOONGSON_PCIBASE4 LOONGSON_PCI_REG(0x20) +#define LOONGSON_PCIEXPRBASE LOONGSON_PCI_REG(0x30) +#define LOONGSON_PCIINT LOONGSON_PCI_REG(0x3c) + +#define LOONGSON_PCI_ISR4C LOONGSON_PCI_REG(0x4c) + +#define LOONGSON_PCICMD_PERR_CLR 0x80000000 +#define LOONGSON_PCICMD_SERR_CLR 0x40000000 +#define LOONGSON_PCICMD_MABORT_CLR 0x20000000 +#define LOONGSON_PCICMD_MTABORT_CLR 0x10000000 +#define LOONGSON_PCICMD_TABORT_CLR 0x08000000 +#define LOONGSON_PCICMD_MPERR_CLR 0x01000000 +#define LOONGSON_PCICMD_PERRRESPEN 0x00000040 +#define LOONGSON_PCICMD_ASTEPEN 0x00000080 +#define LOONGSON_PCICMD_SERREN 0x00000100 +#define LOONGSON_PCILTIMER_BUSLATENCY 0x0000ff00 +#define LOONGSON_PCILTIMER_BUSLATENCY_SHIFT 8 + +/* Loongson h/w Configuration */ + +#define LOONGSON_GENCFG_OFFSET 0x4 +#define LOONGSON_GENCFG LOONGSON_REG(LOONGSON_REGBASE + LOONGSON_GENCFG_OFFSET) + +#define LOONGSON_GENCFG_DEBUGMODE 0x00000001 +#define LOONGSON_GENCFG_SNOOPEN 0x00000002 +#define LOONGSON_GENCFG_CPUSELFRESET 0x00000004 + +#define LOONGSON_GENCFG_FORCE_IRQA 0x00000008 +#define LOONGSON_GENCFG_IRQA_ISOUT 0x00000010 +#define LOONGSON_GENCFG_IRQA_FROM_INT1 0x00000020 +#define LOONGSON_GENCFG_BYTESWAP 0x00000040 + +#define LOONGSON_GENCFG_UNCACHED 0x00000080 +#define LOONGSON_GENCFG_PREFETCHEN 0x00000100 +#define LOONGSON_GENCFG_WBEHINDEN 0x00000200 +#define LOONGSON_GENCFG_CACHEALG 0x00000c00 +#define LOONGSON_GENCFG_CACHEALG_SHIFT 10 +#define LOONGSON_GENCFG_PCIQUEUE 0x00001000 +#define LOONGSON_GENCFG_CACHESTOP 0x00002000 +#define LOONGSON_GENCFG_MSTRBYTESWAP 0x00004000 +#define LOONGSON_GENCFG_BUSERREN 0x00008000 +#define LOONGSON_GENCFG_NORETRYTIMEOUT 0x00010000 +#define LOONGSON_GENCFG_SHORTCOPYTIMEOUT 0x00020000 + +/* PCI address map control */ + +#define LOONGSON_PCIMAP LOONGSON_REG(LOONGSON_REGBASE + 0x10) +#define LOONGSON_PCIMEMBASECFG LOONGSON_REG(LOONGSON_REGBASE + 0x14) +#define LOONGSON_PCIMAP_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x18) + +/* GPIO Regs - r/w */ + +#define LOONGSON_GPIODATA LOONGSON_REG(LOONGSON_REGBASE + 0x1c) +#define LOONGSON_GPIOIE LOONGSON_REG(LOONGSON_REGBASE + 0x20) + +/* ICU Configuration Regs - r/w */ + +#define LOONGSON_INTEDGE LOONGSON_REG(LOONGSON_REGBASE + 0x24) +#define LOONGSON_INTSTEER LOONGSON_REG(LOONGSON_REGBASE + 0x28) +#define LOONGSON_INTPOL LOONGSON_REG(LOONGSON_REGBASE + 0x2c) + +/* ICU Enable Regs - IntEn & IntISR are r/o. */ + +#define LOONGSON_INTENSET LOONGSON_REG(LOONGSON_REGBASE + 0x30) +#define LOONGSON_INTENCLR LOONGSON_REG(LOONGSON_REGBASE + 0x34) +#define LOONGSON_INTEN LOONGSON_REG(LOONGSON_REGBASE + 0x38) +#define LOONGSON_INTISR LOONGSON_REG(LOONGSON_REGBASE + 0x3c) + +/* ICU */ +#define LOONGSON_ICU_MBOXES 0x0000000f +#define LOONGSON_ICU_MBOXES_SHIFT 0 +#define LOONGSON_ICU_DMARDY 0x00000010 +#define LOONGSON_ICU_DMAEMPTY 0x00000020 +#define LOONGSON_ICU_COPYRDY 0x00000040 +#define LOONGSON_ICU_COPYEMPTY 0x00000080 +#define LOONGSON_ICU_COPYERR 0x00000100 +#define LOONGSON_ICU_PCIIRQ 0x00000200 +#define LOONGSON_ICU_MASTERERR 0x00000400 +#define LOONGSON_ICU_SYSTEMERR 0x00000800 +#define LOONGSON_ICU_DRAMPERR 0x00001000 +#define LOONGSON_ICU_RETRYERR 0x00002000 +#define LOONGSON_ICU_GPIOS 0x01ff0000 +#define LOONGSON_ICU_GPIOS_SHIFT 16 +#define LOONGSON_ICU_GPINS 0x7e000000 +#define LOONGSON_ICU_GPINS_SHIFT 25 +#define LOONGSON_ICU_MBOX(N) (1<<(LOONGSON_ICU_MBOXES_SHIFT+(N))) +#define LOONGSON_ICU_GPIO(N) (1<<(LOONGSON_ICU_GPIOS_SHIFT+(N))) +#define LOONGSON_ICU_GPIN(N) (1<<(LOONGSON_ICU_GPINS_SHIFT+(N))) + +/* PCI prefetch window base & mask */ + +#define LOONGSON_MEM_WIN_BASE_L LOONGSON_REG(LOONGSON_REGBASE + 0x40) +#define LOONGSON_MEM_WIN_BASE_H LOONGSON_REG(LOONGSON_REGBASE + 0x44) +#define LOONGSON_MEM_WIN_MASK_L LOONGSON_REG(LOONGSON_REGBASE + 0x48) +#define LOONGSON_MEM_WIN_MASK_H LOONGSON_REG(LOONGSON_REGBASE + 0x4c) + +/* PCI_Hit*_Sel_* */ + +#define LOONGSON_PCI_HIT0_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x50) +#define LOONGSON_PCI_HIT0_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x54) +#define LOONGSON_PCI_HIT1_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x58) +#define LOONGSON_PCI_HIT1_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x5c) +#define LOONGSON_PCI_HIT2_SEL_L LOONGSON_REG(LOONGSON_REGBASE + 0x60) +#define LOONGSON_PCI_HIT2_SEL_H LOONGSON_REG(LOONGSON_REGBASE + 0x64) + +/* PXArb Config & Status */ + +#define LOONGSON_PXARB_CFG LOONGSON_REG(LOONGSON_REGBASE + 0x68) +#define LOONGSON_PXARB_STATUS LOONGSON_REG(LOONGSON_REGBASE + 0x6c) + +/* Chip Config registor of each physical cpu package, PRid >= Loongson-2F */ +#define LOONGSON_CHIPCFG (void __iomem *)TO_UNCAC(0x1fc00180) + +/* pcimap */ + +#define LOONGSON_PCIMAP_PCIMAP_LO0 0x0000003f +#define LOONGSON_PCIMAP_PCIMAP_LO0_SHIFT 0 +#define LOONGSON_PCIMAP_PCIMAP_LO1 0x00000fc0 +#define LOONGSON_PCIMAP_PCIMAP_LO1_SHIFT 6 +#define LOONGSON_PCIMAP_PCIMAP_LO2 0x0003f000 +#define LOONGSON_PCIMAP_PCIMAP_LO2_SHIFT 12 +#define LOONGSON_PCIMAP_PCIMAP_2 0x00040000 +#define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ + ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) + +#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ +#include <linux/cpufreq.h> +extern struct cpufreq_frequency_table loongson2_clockmod_table[]; +#endif + +/* + * address windows configuration module + * + * loongson2e do not have this module + */ +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* address window config module base address */ +#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul +#define LOONGSON_ADDRWINCFG_SIZE 0x180 + +extern unsigned long _loongson_addrwincfg_base; +#define LOONGSON_ADDRWINCFG(offset) \ + (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) + +#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) +#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) +#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) +#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) + +#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) +#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) +#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) +#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) + +#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) +#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) +#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) +#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) + +#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) +#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) +#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) +#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) + +#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) +#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) +#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) +#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) + +#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) +#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) +#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) +#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) + +#define ADDRWIN_WIN0 0 +#define ADDRWIN_WIN1 1 +#define ADDRWIN_WIN2 2 +#define ADDRWIN_WIN3 3 + +#define ADDRWIN_MAP_DST_DDR 0 +#define ADDRWIN_MAP_DST_PCI 1 +#define ADDRWIN_MAP_DST_LIO 1 + +/* + * s: CPU, PCIDMA + * d: DDR, PCI, LIO + * win: 0, 1, 2, 3 + * src: map source + * dst: map destination + * size: ~mask + 1 + */ +#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ + s##_WIN##w##_BASE = (src); \ + s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ + s##_WIN##w##_MASK = ~(size-1); \ +} while (0) + +#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) +#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) +#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ + LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) + +#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#endif /* __ASM_MACH_LOONGSON2EF_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson64/machine.h b/arch/mips/include/asm/mach-loongson2ef/machine.h index 8ef7ea94a26d..4097267ef186 100644 --- a/arch/mips/include/asm/mach-loongson64/machine.h +++ b/arch/mips/include/asm/mach-loongson2ef/machine.h @@ -4,8 +4,8 @@ * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ -#ifndef __ASM_MACH_LOONGSON64_MACHINE_H -#define __ASM_MACH_LOONGSON64_MACHINE_H +#ifndef __ASM_MACH_LOONGSON2EF_MACHINE_H +#define __ASM_MACH_LOONGSON2EF_MACHINE_H #ifdef CONFIG_LEMOTE_FULOONG2E @@ -20,10 +20,4 @@ #endif -#ifdef CONFIG_LOONGSON_MACH3X - -#define LOONGSON_MACHTYPE MACH_LOONGSON_GENERIC - -#endif /* CONFIG_LOONGSON_MACH3X */ - -#endif /* __ASM_MACH_LOONGSON64_MACHINE_H */ +#endif /* __ASM_MACH_LOONGSON2EF_MACHINE_H */ diff --git a/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h b/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h new file mode 100644 index 000000000000..00d602629a55 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/mc146818rtc.h @@ -0,0 +1,36 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998, 2001, 03, 07 by Ralf Baechle (ralf@linux-mips.org) + * + * RTC routines for PC style attached Dallas chip. + */ +#ifndef __ASM_MACH_LOONGSON2EF_MC146818RTC_H +#define __ASM_MACH_LOONGSON2EF_MC146818RTC_H + +#include <linux/io.h> + +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_IRQ 8 + +static inline unsigned char CMOS_READ(unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + return inb_p(RTC_PORT(1)); +} + +static inline void CMOS_WRITE(unsigned char data, unsigned long addr) +{ + outb_p(addr, RTC_PORT(0)); + outb_p(data, RTC_PORT(1)); +} + +#define RTC_ALWAYS_BCD 0 + +#ifndef mc146818_decode_year +#define mc146818_decode_year(year) ((year) < 70 ? (year) + 2000 : (year) + 1970) +#endif + +#endif /* __ASM_MACH_LOONGSON2EF_MC146818RTC_H */ diff --git a/arch/mips/include/asm/mach-loongson64/mem.h b/arch/mips/include/asm/mach-loongson2ef/mem.h index ce33c174c04d..d1d759b8974e 100644 --- a/arch/mips/include/asm/mach-loongson64/mem.h +++ b/arch/mips/include/asm/mach-loongson2ef/mem.h @@ -4,8 +4,8 @@ * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ -#ifndef __ASM_MACH_LOONGSON64_MEM_H -#define __ASM_MACH_LOONGSON64_MEM_H +#ifndef __ASM_MACH_LOONGSON2EF_MEM_H +#define __ASM_MACH_LOONGSON2EF_MEM_H /* * high memory space @@ -34,4 +34,4 @@ #define LOONGSON_MMIO_MEM_END 0x80000000 #endif -#endif /* __ASM_MACH_LOONGSON64_MEM_H */ +#endif /* __ASM_MACH_LOONGSON2EF_MEM_H */ diff --git a/arch/mips/include/asm/mach-loongson2ef/pci.h b/arch/mips/include/asm/mach-loongson2ef/pci.h new file mode 100644 index 000000000000..5588c5bc5395 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/pci.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org> + * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com> + */ + +#ifndef __ASM_MACH_LOONGSON2EF_PCI_H_ +#define __ASM_MACH_LOONGSON2EF_PCI_H_ + +extern struct pci_ops loongson_pci_ops; + +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + +/* + * we use address window2 to map cpu address space to pci space + * window2: cpu [1G, 2G] -> pci [1G, 2G] + * why not use window 0 & 1? because they are used by cpu when booting. + * window0: cpu [0, 256M] -> ddr [0, 256M] + * window1: cpu [256M, 512M] -> pci [256M, 512M] + */ + +/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ +#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ +#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC + +#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST +#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ + +#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ + LOONGSON_PCI_MEM_START + 1) + +#else /* loongson2f/32bit & loongson2e */ + +/* this pci memory space is mapped by pcimap in pci.c */ +#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) + +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#endif /* !__ASM_MACH_LOONGSON2EF_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson2ef/spaces.h b/arch/mips/include/asm/mach-loongson2ef/spaces.h new file mode 100644 index 000000000000..ba4e8e9b618e --- /dev/null +++ b/arch/mips/include/asm/mach-loongson2ef/spaces.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ASM_MACH_LOONGSON2EF_SPACES_H_ +#define __ASM_MACH_LOONGSON2EF_SPACES_H_ + +#if defined(CONFIG_64BIT) +#define CAC_BASE _AC(0x9800000000000000, UL) +#endif /* CONFIG_64BIT */ + +#include <asm/mach-generic/spaces.h> +#endif diff --git a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h index 4aca25f2ff06..7dc8d75445a9 100644 --- a/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h @@ -43,11 +43,8 @@ #define cpu_has_vint 0 #define cpu_has_vtag_icache 0 #define cpu_has_watch 1 - -#ifdef CONFIG_CPU_LOONGSON3 #define cpu_has_wsbh 1 #define cpu_has_ic_fills_f_dc 1 #define cpu_hwrena_impl_bits 0xc0000000 -#endif #endif /* __ASM_MACH_LOONGSON64_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-loongson64/irq.h b/arch/mips/include/asm/mach-loongson64/irq.h index be9f727a9328..73a89913dc38 100644 --- a/arch/mips/include/asm/mach-loongson64/irq.h +++ b/arch/mips/include/asm/mach-loongson64/irq.h @@ -4,8 +4,6 @@ #include <boot_param.h> -#ifdef CONFIG_CPU_LOONGSON3 - /* cpu core interrupt numbers */ #define MIPS_CPU_IRQ_BASE 56 @@ -35,8 +33,6 @@ #define LOONGSON_INT_COREx_INTy(x, y) (1<<(x) | 1<<(y+4)) /* route to int y of core x */ -#endif - extern void fixup_irqs(void); extern void loongson3_ipi_interrupt(struct pt_regs *regs); diff --git a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h index b5e288a12dfe..87a5bfbf8cfe 100644 --- a/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h +++ b/arch/mips/include/asm/mach-loongson64/kernel-entry-init.h @@ -17,7 +17,6 @@ * Override macros used in arch/mips/kernel/head.S. */ .macro kernel_entry_setup -#ifdef CONFIG_CPU_LOONGSON3 .set push .set mips64 /* Set LPA on LOONGSON3 config3 */ @@ -30,23 +29,29 @@ mtc0 t0, CP0_PAGEGRAIN /* Enable STFill Buffer */ mfc0 t0, CP0_PRID + /* Loongson-3A R4+ */ + andi t1, t0, PRID_IMP_MASK + li t2, PRID_IMP_LOONGSON_64G + beq t1, t2, 1f + nop + /* Loongson-3A R2/R3 */ andi t0, (PRID_IMP_MASK | PRID_REV_MASK) - slti t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0) - bnez t0, 1f + slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) + bnez t0, 2f + nop +1: mfc0 t0, CP0_CONFIG6 or t0, 0x100 mtc0 t0, CP0_CONFIG6 -1: +2: _ehb .set pop -#endif .endm /* * Do SMP slave processor setup. */ .macro smp_slave_setup -#ifdef CONFIG_CPU_LOONGSON3 .set push .set mips64 /* Set LPA on LOONGSON3 config3 */ @@ -59,16 +64,23 @@ mtc0 t0, CP0_PAGEGRAIN /* Enable STFill Buffer */ mfc0 t0, CP0_PRID + /* Loongson-3A R4+ */ + andi t1, t0, PRID_IMP_MASK + li t2, PRID_IMP_LOONGSON_64G + beq t1, t2, 1f + nop + /* Loongson-3A R2/R3 */ andi t0, (PRID_IMP_MASK | PRID_REV_MASK) - slti t0, (PRID_IMP_LOONGSON_64 | PRID_REV_LOONGSON3A_R2_0) - bnez t0, 1f + slti t0, (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0) + bnez t0, 2f + nop +1: mfc0 t0, CP0_CONFIG6 or t0, 0x100 mtc0 t0, CP0_CONFIG6 -1: +2: _ehb .set pop -#endif .endm #endif /* __ASM_MACH_LOONGSON64_KERNEL_ENTRY_H */ diff --git a/arch/mips/include/asm/mach-loongson64/loongson.h b/arch/mips/include/asm/mach-loongson64/loongson.h index 694a58574ec0..bc00c2d88225 100644 --- a/arch/mips/include/asm/mach-loongson64/loongson.h +++ b/arch/mips/include/asm/mach-loongson64/loongson.h @@ -12,8 +12,6 @@ #include <linux/irq.h> #include <boot_param.h> -/* loongson internal northbridge initialization */ -extern void bonito_irq_init(void); /* machine-specific reboot/halt operation */ extern void mach_prepare_reboot(void); @@ -27,24 +25,9 @@ extern const struct plat_smp_ops loongson3_smp_ops; /* loongson-specific command line, env and memory initialization */ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); -extern void __init prom_init_machtype(void); extern void __init prom_init_env(void); -#ifdef CONFIG_LOONGSON_UART_BASE -extern unsigned long _loongson_uart_base[], loongson_uart_base[]; -extern void prom_init_loongson_uart_base(void); -#endif - -static inline void prom_init_uart_base(void) -{ -#ifdef CONFIG_LOONGSON_UART_BASE - prom_init_loongson_uart_base(); -#endif -} /* irq operation functions */ -extern void bonito_irqdispatch(void); -extern void __init bonito_irq_init(void); -extern void __init mach_init_irq(void); extern void mach_irq_dispatch(unsigned int pending); extern int mach_i8259_irq(void); @@ -64,17 +47,6 @@ extern int mach_i8259_irq(void); #define LOONGSON3_REG32(base, x) \ (*(volatile u32 *)((char *)TO_UNCAC(base) + (x))) -#define LOONGSON_IRQ_BASE 32 -#define LOONGSON2_PERFCNT_IRQ (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */ - -#include <linux/interrupt.h> -static inline void do_perfcnt_IRQ(void) -{ -#if IS_ENABLED(CONFIG_OPROFILE) - do_IRQ(LOONGSON2_PERFCNT_IRQ); -#endif -} - #define LOONGSON_FLASH_BASE 0x1c000000 #define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */ #define LOONGSON_FLASH_TOP (LOONGSON_FLASH_BASE+LOONGSON_FLASH_SIZE-1) @@ -109,11 +81,7 @@ static inline void do_perfcnt_IRQ(void) #define LOONGSON_PCICFG_SIZE 0x00000800 /* 2K */ #define LOONGSON_PCICFG_TOP (LOONGSON_PCICFG_BASE+LOONGSON_PCICFG_SIZE-1) -#ifdef CONFIG_CPU_LOONGSON3 #define LOONGSON_PCIIO_BASE loongson_sysconf.pci_io_base -#else -#define LOONGSON_PCIIO_BASE 0x1fd00000 -#endif #define LOONGSON_PCIIO_SIZE 0x00100000 /* 1M */ #define LOONGSON_PCIIO_TOP (LOONGSON_PCIIO_BASE+LOONGSON_PCIIO_SIZE-1) @@ -270,86 +238,4 @@ extern u64 loongson_freqctrl[MAX_PACKAGES]; #define LOONGSON_PCIMAP_WIN(WIN, ADDR) \ ((((ADDR)>>26) & LOONGSON_PCIMAP_PCIMAP_LO0) << ((WIN)*6)) -#ifdef CONFIG_CPU_SUPPORTS_CPUFREQ -#include <linux/cpufreq.h> -extern struct cpufreq_frequency_table loongson2_clockmod_table[]; -#endif - -/* - * address windows configuration module - * - * loongson2e do not have this module - */ -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - -/* address window config module base address */ -#define LOONGSON_ADDRWINCFG_BASE 0x3ff00000ul -#define LOONGSON_ADDRWINCFG_SIZE 0x180 - -extern unsigned long _loongson_addrwincfg_base; -#define LOONGSON_ADDRWINCFG(offset) \ - (*(volatile u64 *)(_loongson_addrwincfg_base + (offset))) - -#define CPU_WIN0_BASE LOONGSON_ADDRWINCFG(0x00) -#define CPU_WIN1_BASE LOONGSON_ADDRWINCFG(0x08) -#define CPU_WIN2_BASE LOONGSON_ADDRWINCFG(0x10) -#define CPU_WIN3_BASE LOONGSON_ADDRWINCFG(0x18) - -#define CPU_WIN0_MASK LOONGSON_ADDRWINCFG(0x20) -#define CPU_WIN1_MASK LOONGSON_ADDRWINCFG(0x28) -#define CPU_WIN2_MASK LOONGSON_ADDRWINCFG(0x30) -#define CPU_WIN3_MASK LOONGSON_ADDRWINCFG(0x38) - -#define CPU_WIN0_MMAP LOONGSON_ADDRWINCFG(0x40) -#define CPU_WIN1_MMAP LOONGSON_ADDRWINCFG(0x48) -#define CPU_WIN2_MMAP LOONGSON_ADDRWINCFG(0x50) -#define CPU_WIN3_MMAP LOONGSON_ADDRWINCFG(0x58) - -#define PCIDMA_WIN0_BASE LOONGSON_ADDRWINCFG(0x60) -#define PCIDMA_WIN1_BASE LOONGSON_ADDRWINCFG(0x68) -#define PCIDMA_WIN2_BASE LOONGSON_ADDRWINCFG(0x70) -#define PCIDMA_WIN3_BASE LOONGSON_ADDRWINCFG(0x78) - -#define PCIDMA_WIN0_MASK LOONGSON_ADDRWINCFG(0x80) -#define PCIDMA_WIN1_MASK LOONGSON_ADDRWINCFG(0x88) -#define PCIDMA_WIN2_MASK LOONGSON_ADDRWINCFG(0x90) -#define PCIDMA_WIN3_MASK LOONGSON_ADDRWINCFG(0x98) - -#define PCIDMA_WIN0_MMAP LOONGSON_ADDRWINCFG(0xa0) -#define PCIDMA_WIN1_MMAP LOONGSON_ADDRWINCFG(0xa8) -#define PCIDMA_WIN2_MMAP LOONGSON_ADDRWINCFG(0xb0) -#define PCIDMA_WIN3_MMAP LOONGSON_ADDRWINCFG(0xb8) - -#define ADDRWIN_WIN0 0 -#define ADDRWIN_WIN1 1 -#define ADDRWIN_WIN2 2 -#define ADDRWIN_WIN3 3 - -#define ADDRWIN_MAP_DST_DDR 0 -#define ADDRWIN_MAP_DST_PCI 1 -#define ADDRWIN_MAP_DST_LIO 1 - -/* - * s: CPU, PCIDMA - * d: DDR, PCI, LIO - * win: 0, 1, 2, 3 - * src: map source - * dst: map destination - * size: ~mask + 1 - */ -#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\ - s##_WIN##w##_BASE = (src); \ - s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \ - s##_WIN##w##_MASK = ~(size-1); \ -} while (0) - -#define LOONGSON_ADDRWIN_CPUTOPCI(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(CPU, PCI, win, src, dst, size) -#define LOONGSON_ADDRWIN_CPUTODDR(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(CPU, DDR, win, src, dst, size) -#define LOONGSON_ADDRWIN_PCITODDR(win, src, dst, size) \ - LOONGSON_ADDRWIN_CFG(PCIDMA, DDR, win, src, dst, size) - -#endif /* ! CONFIG_CPU_SUPPORTS_ADDRWINCFG */ - #endif /* __ASM_MACH_LOONGSON64_LOONGSON_H */ diff --git a/arch/mips/include/asm/mach-loongson64/loongson_regs.h b/arch/mips/include/asm/mach-loongson64/loongson_regs.h new file mode 100644 index 000000000000..363a47a5d26e --- /dev/null +++ b/arch/mips/include/asm/mach-loongson64/loongson_regs.h @@ -0,0 +1,227 @@ +/* + * Read/Write Loongson Extension Registers + */ + +#ifndef _LOONGSON_REGS_H_ +#define _LOONGSON_REGS_H_ + +#include <linux/types.h> +#include <linux/bits.h> + +#include <asm/mipsregs.h> +#include <asm/cpu.h> + +static inline bool cpu_has_cfg(void) +{ + return ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64G); +} + +static inline u32 read_cpucfg(u32 reg) +{ + u32 __res; + + __asm__ __volatile__( + "parse_r __res,%0\n\t" + "parse_r reg,%1\n\t" + ".insn \n\t" + ".word (0xc8080118 | (reg << 21) | (__res << 11))\n\t" + :"=r"(__res) + :"r"(reg) + : + ); + return __res; +} + +/* Bit Domains for CFG registers */ +#define LOONGSON_CFG0 0x0 +#define LOONGSON_CFG0_PRID GENMASK(31, 0) + +#define LOONGSON_CFG1 0x1 +#define LOONGSON_CFG1_FP BIT(0) +#define LOONGSON_CFG1_FPREV GENMASK(3, 1) +#define LOONGSON_CFG1_MMI BIT(4) +#define LOONGSON_CFG1_MSA1 BIT(5) +#define LOONGSON_CFG1_MSA2 BIT(6) +#define LOONGSON_CFG1_CGP BIT(7) +#define LOONGSON_CFG1_WRP BIT(8) +#define LOONGSON_CFG1_LSX1 BIT(9) +#define LOONGSON_CFG1_LSX2 BIT(10) +#define LOONGSON_CFG1_LASX BIT(11) +#define LOONGSON_CFG1_R6FXP BIT(12) +#define LOONGSON_CFG1_R6CRCP BIT(13) +#define LOONGSON_CFG1_R6FPP BIT(14) +#define LOONGSON_CFG1_CNT64 BIT(15) +#define LOONGSON_CFG1_LSLDR0 BIT(16) +#define LOONGSON_CFG1_LSPREF BIT(17) +#define LOONGSON_CFG1_LSPREFX BIT(18) +#define LOONGSON_CFG1_LSSYNCI BIT(19) +#define LOONGSON_CFG1_LSUCA BIT(20) +#define LOONGSON_CFG1_LLSYNC BIT(21) +#define LOONGSON_CFG1_TGTSYNC BIT(22) +#define LOONGSON_CFG1_LLEXC BIT(23) +#define LOONGSON_CFG1_SCRAND BIT(24) +#define LOONGSON_CFG1_MUALP BIT(25) +#define LOONGSON_CFG1_KMUALEN BIT(26) +#define LOONGSON_CFG1_ITLBT BIT(27) +#define LOONGSON_CFG1_LSUPERF BIT(28) +#define LOONGSON_CFG1_SFBP BIT(29) +#define LOONGSON_CFG1_CDMAP BIT(30) + +#define LOONGSON_CFG2 0x2 +#define LOONGSON_CFG2_LEXT1 BIT(0) +#define LOONGSON_CFG2_LEXT2 BIT(1) +#define LOONGSON_CFG2_LEXT3 BIT(2) +#define LOONGSON_CFG2_LSPW BIT(3) +#define LOONGSON_CFG2_LBT1 BIT(4) +#define LOONGSON_CFG2_LBT2 BIT(5) +#define LOONGSON_CFG2_LBT3 BIT(6) +#define LOONGSON_CFG2_LBTMMU BIT(7) +#define LOONGSON_CFG2_LPMP BIT(8) +#define LOONGSON_CFG2_LPMPREV GENMASK(11, 9) +#define LOONGSON_CFG2_LAMO BIT(12) +#define LOONGSON_CFG2_LPIXU BIT(13) +#define LOONGSON_CFG2_LPIXUN BIT(14) +#define LOONGSON_CFG2_LZVP BIT(15) +#define LOONGSON_CFG2_LZVREV GENMASK(18, 16) +#define LOONGSON_CFG2_LGFTP BIT(19) +#define LOONGSON_CFG2_LGFTPREV GENMASK(22, 20) +#define LOONGSON_CFG2_LLFTP BIT(23) +#define LOONGSON_CFG2_LLFTPREV GENMASK(26, 24) +#define LOONGSON_CFG2_LCSRP BIT(27) +#define LOONGSON_CFG2_LDISBLIKELY BIT(28) + +#define LOONGSON_CFG3 0x3 +#define LOONGSON_CFG3_LCAMP BIT(0) +#define LOONGSON_CFG3_LCAMREV GENMASK(3, 1) +#define LOONGSON_CFG3_LCAMNUM GENMASK(11, 4) +#define LOONGSON_CFG3_LCAMKW GENMASK(19, 12) +#define LOONGSON_CFG3_LCAMVW GENMASK(27, 20) + +#define LOONGSON_CFG4 0x4 +#define LOONGSON_CFG4_CCFREQ GENMASK(31, 0) + +#define LOONGSON_CFG5 0x5 +#define LOONGSON_CFG5_CFM GENMASK(15, 0) +#define LOONGSON_CFG5_CFD GENMASK(31, 16) + +#define LOONGSON_CFG6 0x6 + +#define LOONGSON_CFG7 0x7 +#define LOONGSON_CFG7_GCCAEQRP BIT(0) +#define LOONGSON_CFG7_UCAWINP BIT(1) + +static inline bool cpu_has_csr(void) +{ + if (cpu_has_cfg()) + return (read_cpucfg(LOONGSON_CFG2) & LOONGSON_CFG2_LCSRP); + + return false; +} + +static inline u32 csr_readl(u32 reg) +{ + u32 __res; + + /* RDCSR reg, val */ + __asm__ __volatile__( + "parse_r __res,%0\n\t" + "parse_r reg,%1\n\t" + ".insn \n\t" + ".word (0xc8000118 | (reg << 21) | (__res << 11))\n\t" + :"=r"(__res) + :"r"(reg) + : + ); + return __res; +} + +static inline u64 csr_readq(u32 reg) +{ + u64 __res; + + /* DWRCSR reg, val */ + __asm__ __volatile__( + "parse_r __res,%0\n\t" + "parse_r reg,%1\n\t" + ".insn \n\t" + ".word (0xc8020118 | (reg << 21) | (__res << 11))\n\t" + :"=r"(__res) + :"r"(reg) + : + ); + return __res; +} + +static inline void csr_writel(u32 val, u32 reg) +{ + /* WRCSR reg, val */ + __asm__ __volatile__( + "parse_r reg,%0\n\t" + "parse_r val,%1\n\t" + ".insn \n\t" + ".word (0xc8010118 | (reg << 21) | (val << 11))\n\t" + : + :"r"(reg),"r"(val) + : + ); +} + +static inline void csr_writeq(u64 val, u32 reg) +{ + /* DWRCSR reg, val */ + __asm__ __volatile__( + "parse_r reg,%0\n\t" + "parse_r val,%1\n\t" + ".insn \n\t" + ".word (0xc8030118 | (reg << 21) | (val << 11))\n\t" + : + :"r"(reg),"r"(val) + : + ); +} + +/* Public CSR Register can also be accessed with regular addresses */ +#define CSR_PUBLIC_MMIO_BASE 0x1fe00000 + +#define MMIO_CSR(x) (void *)TO_UNCAC(CSR_PUBLIC_MMIO_BASE + x) + +#define LOONGSON_CSR_FEATURES 0x8 +#define LOONGSON_CSRF_TEMP BIT(0) +#define LOONGSON_CSRF_NODECNT BIT(1) +#define LOONGSON_CSRF_MSI BIT(2) +#define LOONGSON_CSRF_EXTIOI BIT(3) +#define LOONGSON_CSRF_IPI BIT(4) +#define LOONGSON_CSRF_FREQ BIT(5) + +#define LOONGSON_CSR_VENDOR 0x10 /* Vendor name string, should be "Loongson" */ +#define LOONGSON_CSR_CPUNAME 0x20 /* Processor name string */ +#define LOONGSON_CSR_NODECNT 0x408 +#define LOONGSON_CSR_CPUTEMP 0x428 + +/* PerCore CSR, only accessable by local cores */ +#define LOONGSON_CSR_IPI_STATUS 0x1000 +#define LOONGSON_CSR_IPI_EN 0x1004 +#define LOONGSON_CSR_IPI_SET 0x1008 +#define LOONGSON_CSR_IPI_CLEAR 0x100c +#define LOONGSON_CSR_IPI_SEND 0x1040 +#define CSR_IPI_SEND_IP_SHIFT 0 +#define CSR_IPI_SEND_CPU_SHIFT 16 +#define CSR_IPI_SEND_BLOCK BIT(31) + +static inline u64 drdtime(void) +{ + int rID = 0; + u64 val = 0; + + __asm__ __volatile__( + "parse_r rID,%0\n\t" + "parse_r val,%1\n\t" + ".insn \n\t" + ".word (0xc8090118 | (rID << 21) | (val << 11))\n\t" + :"=r"(rID),"=r"(val) + : + ); + return val; +} + +#endif diff --git a/arch/mips/include/asm/mach-loongson64/mmzone.h b/arch/mips/include/asm/mach-loongson64/mmzone.h index 62073d60739f..3a25dbd3b3e9 100644 --- a/arch/mips/include/asm/mach-loongson64/mmzone.h +++ b/arch/mips/include/asm/mach-loongson64/mmzone.h @@ -6,8 +6,8 @@ * Huacai Chen, chenhc@lemote.com * Xiaofu Meng, Shuangshuang Zhang */ -#ifndef _ASM_MACH_MMZONE_H -#define _ASM_MACH_MMZONE_H +#ifndef _ASM_MACH_LOONGSON64_MMZONE_H +#define _ASM_MACH_LOONGSON64_MMZONE_H #include <boot_param.h> #define NODE_ADDRSPACE_SHIFT 44 @@ -19,30 +19,9 @@ #define pa_to_nid(addr) (((addr) & 0xf00000000000) >> NODE_ADDRSPACE_SHIFT) #define nid_to_addrbase(nid) ((nid) << NODE_ADDRSPACE_SHIFT) -#define LEVELS_PER_SLICE 128 +extern struct pglist_data *__node_data[]; -struct slice_data { - unsigned long irq_enable_mask[2]; - int level_to_irq[LEVELS_PER_SLICE]; -}; - -struct hub_data { - cpumask_t h_cpus; - unsigned long slice_map; - unsigned long irq_alloc_mask[2]; - struct slice_data slice[2]; -}; - -struct node_data { - struct pglist_data pglist; - struct hub_data hub; - cpumask_t cpumask; -}; - -extern struct node_data *__node_data[]; - -#define NODE_DATA(n) (&__node_data[(n)]->pglist) -#define hub_data(n) (&__node_data[(n)]->hub) +#define NODE_DATA(n) (__node_data[n]) extern void setup_zero_pages(void); extern void __init prom_init_numa_memory(void); diff --git a/arch/mips/include/asm/mach-loongson64/pci.h b/arch/mips/include/asm/mach-loongson64/pci.h index 97f807fb2117..8b59d64a23e8 100644 --- a/arch/mips/include/asm/mach-loongson64/pci.h +++ b/arch/mips/include/asm/mach-loongson64/pci.h @@ -12,39 +12,8 @@ extern struct pci_ops loongson_pci_ops; /* this is an offset from mips_io_port_base */ #define LOONGSON_PCI_IO_START 0x00004000UL -#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG - -/* - * we use address window2 to map cpu address space to pci space - * window2: cpu [1G, 2G] -> pci [1G, 2G] - * why not use window 0 & 1? because they are used by cpu when booting. - * window0: cpu [0, 256M] -> ddr [0, 256M] - * window1: cpu [256M, 512M] -> pci [256M, 512M] - */ - -/* the smallest LOONGSON_CPU_MEM_SRC can be 512M */ -#define LOONGSON_CPU_MEM_SRC 0x40000000ul /* 1G */ -#define LOONGSON_PCI_MEM_DST LOONGSON_CPU_MEM_SRC - -#define LOONGSON_PCI_MEM_START LOONGSON_PCI_MEM_DST -#define LOONGSON_PCI_MEM_END (0x80000000ul-1) /* 2G */ - -#define MMAP_CPUTOPCI_SIZE (LOONGSON_PCI_MEM_END - \ - LOONGSON_PCI_MEM_START + 1) - -#else /* loongson2f/32bit & loongson2e */ - -/* this pci memory space is mapped by pcimap in pci.c */ -#ifdef CONFIG_CPU_LOONGSON3 #define LOONGSON_PCI_MEM_START 0x40000000UL #define LOONGSON_PCI_MEM_END 0x7effffffUL -#else -#define LOONGSON_PCI_MEM_START LOONGSON_PCILO1_BASE -#define LOONGSON_PCI_MEM_END (LOONGSON_PCILO1_BASE + 0x04000000 * 2) -#endif -/* this is an offset from mips_io_port_base */ -#define LOONGSON_PCI_IO_START 0x00004000UL -#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ #endif /* !__ASM_MACH_LOONGSON64_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-loongson64/topology.h b/arch/mips/include/asm/mach-loongson64/topology.h index 7ff819ab308a..3414a1fd1783 100644 --- a/arch/mips/include/asm/mach-loongson64/topology.h +++ b/arch/mips/include/asm/mach-loongson64/topology.h @@ -5,7 +5,9 @@ #ifdef CONFIG_NUMA #define cpu_to_node(cpu) (cpu_logical_map(cpu) >> 2) -#define cpumask_of_node(node) (&__node_data[(node)]->cpumask) + +extern cpumask_t __node_cpumask[]; +#define cpumask_of_node(node) (&__node_cpumask[node]) struct pci_bus; extern int pcibus_to_node(struct pci_bus *); diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index ed70994fbbec..9fe9515204d6 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -121,10 +121,10 @@ search_module_dbetables(unsigned long addr) #define MODULE_PROC_FAMILY "SB1 " #elif defined CONFIG_CPU_LOONGSON1 #define MODULE_PROC_FAMILY "LOONGSON1 " -#elif defined CONFIG_CPU_LOONGSON2 -#define MODULE_PROC_FAMILY "LOONGSON2 " -#elif defined CONFIG_CPU_LOONGSON3 -#define MODULE_PROC_FAMILY "LOONGSON3 " +#elif defined CONFIG_CPU_LOONGSON2EF +#define MODULE_PROC_FAMILY "LOONGSON2EF " +#elif defined CONFIG_CPU_LOONGSON64 +#define MODULE_PROC_FAMILY "LOONGSON64 " #elif defined CONFIG_CPU_CAVIUM_OCTEON #define MODULE_PROC_FAMILY "OCTEON " #elif defined CONFIG_CPU_XLR diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h index a92cd30b48c9..3bc630ff9ad4 100644 --- a/arch/mips/include/asm/pci/bridge.h +++ b/arch/mips/include/asm/pci/bridge.h @@ -807,6 +807,7 @@ struct bridge_controller { unsigned long intr_addr; struct irq_domain *domain; unsigned int pci_int[8]; + u32 ioc3_sid[8]; nasid_t nasid; }; diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h index fba18d4a9190..7619ad319400 100644 --- a/arch/mips/include/asm/processor.h +++ b/arch/mips/include/asm/processor.h @@ -385,7 +385,7 @@ unsigned long get_wchan(struct task_struct *p); #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) -#ifdef CONFIG_CPU_LOONGSON3 +#ifdef CONFIG_CPU_LOONGSON64 /* * Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a * tight read loop is executed, because reads take priority over writes & the diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h index 7f4a32d3345a..15ab16f99f28 100644 --- a/arch/mips/include/asm/r4kcache.h +++ b/arch/mips/include/asm/r4kcache.h @@ -15,12 +15,14 @@ #include <linux/stringify.h> #include <asm/asm.h> +#include <asm/asm-eva.h> #include <asm/cacheops.h> #include <asm/compiler.h> #include <asm/cpu-features.h> #include <asm/cpu-type.h> #include <asm/mipsmtregs.h> #include <asm/mmzone.h> +#include <asm/unroll.h> #include <linux/uaccess.h> /* for uaccess_kernel() */ extern void (*r4k_blast_dcache)(void); @@ -39,16 +41,19 @@ extern void (*r4k_blast_icache)(void); */ #define INDEX_BASE CKSEG0 -#define cache_op(op,addr) \ +#define _cache_op(insn, op, addr) \ __asm__ __volatile__( \ " .set push \n" \ " .set noreorder \n" \ " .set "MIPS_ISA_ARCH_LEVEL" \n" \ - " cache %0, %1 \n" \ + " " insn("%0", "%1") " \n" \ " .set pop \n" \ : \ : "i" (op), "R" (*(unsigned char *)(addr))) +#define cache_op(op, addr) \ + _cache_op(kernel_cache, op, addr) + static inline void flush_icache_line_indexed(unsigned long addr) { cache_op(Index_Invalidate_I, addr); @@ -67,7 +72,7 @@ static inline void flush_scache_line_indexed(unsigned long addr) static inline void flush_icache_line(unsigned long addr) { switch (boot_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: cache_op(Hit_Invalidate_I_Loongson2, addr); break; @@ -149,7 +154,7 @@ static inline void flush_scache_line(unsigned long addr) static inline int protected_flush_icache_line(unsigned long addr) { switch (boot_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: return protected_cache_op(Hit_Invalidate_I_Loongson2, addr); default: @@ -193,338 +198,10 @@ static inline void invalidate_tcache_page(unsigned long addr) cache_op(Page_Invalidate_T, addr); } -#ifndef CONFIG_CPU_MIPSR6 -#define cache16_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x010(%0) \n" \ - " cache %1, 0x020(%0); cache %1, 0x030(%0) \n" \ - " cache %1, 0x040(%0); cache %1, 0x050(%0) \n" \ - " cache %1, 0x060(%0); cache %1, 0x070(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x090(%0) \n" \ - " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0) \n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0) \n" \ - " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x110(%0) \n" \ - " cache %1, 0x120(%0); cache %1, 0x130(%0) \n" \ - " cache %1, 0x140(%0); cache %1, 0x150(%0) \n" \ - " cache %1, 0x160(%0); cache %1, 0x170(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x190(%0) \n" \ - " cache %1, 0x1a0(%0); cache %1, 0x1b0(%0) \n" \ - " cache %1, 0x1c0(%0); cache %1, 0x1d0(%0) \n" \ - " cache %1, 0x1e0(%0); cache %1, 0x1f0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x020(%0) \n" \ - " cache %1, 0x040(%0); cache %1, 0x060(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x0a0(%0) \n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x120(%0) \n" \ - " cache %1, 0x140(%0); cache %1, 0x160(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x1a0(%0) \n" \ - " cache %1, 0x1c0(%0); cache %1, 0x1e0(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x220(%0) \n" \ - " cache %1, 0x240(%0); cache %1, 0x260(%0) \n" \ - " cache %1, 0x280(%0); cache %1, 0x2a0(%0) \n" \ - " cache %1, 0x2c0(%0); cache %1, 0x2e0(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x320(%0) \n" \ - " cache %1, 0x340(%0); cache %1, 0x360(%0) \n" \ - " cache %1, 0x380(%0); cache %1, 0x3a0(%0) \n" \ - " cache %1, 0x3c0(%0); cache %1, 0x3e0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x040(%0) \n" \ - " cache %1, 0x080(%0); cache %1, 0x0c0(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x140(%0) \n" \ - " cache %1, 0x180(%0); cache %1, 0x1c0(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x240(%0) \n" \ - " cache %1, 0x280(%0); cache %1, 0x2c0(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x340(%0) \n" \ - " cache %1, 0x380(%0); cache %1, 0x3c0(%0) \n" \ - " cache %1, 0x400(%0); cache %1, 0x440(%0) \n" \ - " cache %1, 0x480(%0); cache %1, 0x4c0(%0) \n" \ - " cache %1, 0x500(%0); cache %1, 0x540(%0) \n" \ - " cache %1, 0x580(%0); cache %1, 0x5c0(%0) \n" \ - " cache %1, 0x600(%0); cache %1, 0x640(%0) \n" \ - " cache %1, 0x680(%0); cache %1, 0x6c0(%0) \n" \ - " cache %1, 0x700(%0); cache %1, 0x740(%0) \n" \ - " cache %1, 0x780(%0); cache %1, 0x7c0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache128_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips3 \n" \ - " cache %1, 0x000(%0); cache %1, 0x080(%0) \n" \ - " cache %1, 0x100(%0); cache %1, 0x180(%0) \n" \ - " cache %1, 0x200(%0); cache %1, 0x280(%0) \n" \ - " cache %1, 0x300(%0); cache %1, 0x380(%0) \n" \ - " cache %1, 0x400(%0); cache %1, 0x480(%0) \n" \ - " cache %1, 0x500(%0); cache %1, 0x580(%0) \n" \ - " cache %1, 0x600(%0); cache %1, 0x680(%0) \n" \ - " cache %1, 0x700(%0); cache %1, 0x780(%0) \n" \ - " cache %1, 0x800(%0); cache %1, 0x880(%0) \n" \ - " cache %1, 0x900(%0); cache %1, 0x980(%0) \n" \ - " cache %1, 0xa00(%0); cache %1, 0xa80(%0) \n" \ - " cache %1, 0xb00(%0); cache %1, 0xb80(%0) \n" \ - " cache %1, 0xc00(%0); cache %1, 0xc80(%0) \n" \ - " cache %1, 0xd00(%0); cache %1, 0xd80(%0) \n" \ - " cache %1, 0xe00(%0); cache %1, 0xe80(%0) \n" \ - " cache %1, 0xf00(%0); cache %1, 0xf80(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#else -/* - * MIPS R6 changed the cache opcode and moved to a 8-bit offset field. - * This means we now need to increment the base register before we flush - * more cache lines - */ -#define cache16_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x010(%0)\n" \ - " cache %1, 0x020(%0); cache %1, 0x030(%0)\n" \ - " cache %1, 0x040(%0); cache %1, 0x050(%0)\n" \ - " cache %1, 0x060(%0); cache %1, 0x070(%0)\n" \ - " cache %1, 0x080(%0); cache %1, 0x090(%0)\n" \ - " cache %1, 0x0a0(%0); cache %1, 0x0b0(%0)\n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0d0(%0)\n" \ - " cache %1, 0x0e0(%0); cache %1, 0x0f0(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x010($1)\n" \ - " cache %1, 0x020($1); cache %1, 0x030($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x050($1)\n" \ - " cache %1, 0x060($1); cache %1, 0x070($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x090($1)\n" \ - " cache %1, 0x0a0($1); cache %1, 0x0b0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0d0($1)\n" \ - " cache %1, 0x0e0($1); cache %1, 0x0f0($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x020(%0)\n" \ - " cache %1, 0x040(%0); cache %1, 0x060(%0)\n" \ - " cache %1, 0x080(%0); cache %1, 0x0a0(%0)\n" \ - " cache %1, 0x0c0(%0); cache %1, 0x0e0(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x020($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x060($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x020($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x060($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100\n" \ - " cache %1, 0x000($1); cache %1, 0x020($1)\n" \ - " cache %1, 0x040($1); cache %1, 0x060($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0a0($1)\n" \ - " cache %1, 0x0c0($1); cache %1, 0x0e0($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x040(%0)\n" \ - " cache %1, 0x080(%0); cache %1, 0x0c0(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x040($1)\n" \ - " cache %1, 0x080($1); cache %1, 0x0c0($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache128_unroll32(base,op) \ - __asm__ __volatile__( \ - " .set push\n" \ - " .set noreorder\n" \ - " .set mips64r6\n" \ - " .set noat\n" \ - " cache %1, 0x000(%0); cache %1, 0x080(%0)\n" \ - " "__stringify(LONG_ADDIU)" $1, %0, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " "__stringify(LONG_ADDIU)" $1, $1, 0x100 \n" \ - " cache %1, 0x000($1); cache %1, 0x080($1)\n" \ - " .set pop\n" \ - : \ - : "r" (base), \ - "i" (op)); -#endif /* CONFIG_CPU_MIPSR6 */ - -/* - * Perform the cache operation specified by op using a user mode virtual - * address while in kernel mode. - */ -#define cache16_unroll32_user(base,op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips0 \n" \ - " .set eva \n" \ - " cachee %1, 0x000(%0); cachee %1, 0x010(%0) \n" \ - " cachee %1, 0x020(%0); cachee %1, 0x030(%0) \n" \ - " cachee %1, 0x040(%0); cachee %1, 0x050(%0) \n" \ - " cachee %1, 0x060(%0); cachee %1, 0x070(%0) \n" \ - " cachee %1, 0x080(%0); cachee %1, 0x090(%0) \n" \ - " cachee %1, 0x0a0(%0); cachee %1, 0x0b0(%0) \n" \ - " cachee %1, 0x0c0(%0); cachee %1, 0x0d0(%0) \n" \ - " cachee %1, 0x0e0(%0); cachee %1, 0x0f0(%0) \n" \ - " cachee %1, 0x100(%0); cachee %1, 0x110(%0) \n" \ - " cachee %1, 0x120(%0); cachee %1, 0x130(%0) \n" \ - " cachee %1, 0x140(%0); cachee %1, 0x150(%0) \n" \ - " cachee %1, 0x160(%0); cachee %1, 0x170(%0) \n" \ - " cachee %1, 0x180(%0); cachee %1, 0x190(%0) \n" \ - " cachee %1, 0x1a0(%0); cachee %1, 0x1b0(%0) \n" \ - " cachee %1, 0x1c0(%0); cachee %1, 0x1d0(%0) \n" \ - " cachee %1, 0x1e0(%0); cachee %1, 0x1f0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache32_unroll32_user(base, op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips0 \n" \ - " .set eva \n" \ - " cachee %1, 0x000(%0); cachee %1, 0x020(%0) \n" \ - " cachee %1, 0x040(%0); cachee %1, 0x060(%0) \n" \ - " cachee %1, 0x080(%0); cachee %1, 0x0a0(%0) \n" \ - " cachee %1, 0x0c0(%0); cachee %1, 0x0e0(%0) \n" \ - " cachee %1, 0x100(%0); cachee %1, 0x120(%0) \n" \ - " cachee %1, 0x140(%0); cachee %1, 0x160(%0) \n" \ - " cachee %1, 0x180(%0); cachee %1, 0x1a0(%0) \n" \ - " cachee %1, 0x1c0(%0); cachee %1, 0x1e0(%0) \n" \ - " cachee %1, 0x200(%0); cachee %1, 0x220(%0) \n" \ - " cachee %1, 0x240(%0); cachee %1, 0x260(%0) \n" \ - " cachee %1, 0x280(%0); cachee %1, 0x2a0(%0) \n" \ - " cachee %1, 0x2c0(%0); cachee %1, 0x2e0(%0) \n" \ - " cachee %1, 0x300(%0); cachee %1, 0x320(%0) \n" \ - " cachee %1, 0x340(%0); cachee %1, 0x360(%0) \n" \ - " cachee %1, 0x380(%0); cachee %1, 0x3a0(%0) \n" \ - " cachee %1, 0x3c0(%0); cachee %1, 0x3e0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); - -#define cache64_unroll32_user(base, op) \ - __asm__ __volatile__( \ - " .set push \n" \ - " .set noreorder \n" \ - " .set mips0 \n" \ - " .set eva \n" \ - " cachee %1, 0x000(%0); cachee %1, 0x040(%0) \n" \ - " cachee %1, 0x080(%0); cachee %1, 0x0c0(%0) \n" \ - " cachee %1, 0x100(%0); cachee %1, 0x140(%0) \n" \ - " cachee %1, 0x180(%0); cachee %1, 0x1c0(%0) \n" \ - " cachee %1, 0x200(%0); cachee %1, 0x240(%0) \n" \ - " cachee %1, 0x280(%0); cachee %1, 0x2c0(%0) \n" \ - " cachee %1, 0x300(%0); cachee %1, 0x340(%0) \n" \ - " cachee %1, 0x380(%0); cachee %1, 0x3c0(%0) \n" \ - " cachee %1, 0x400(%0); cachee %1, 0x440(%0) \n" \ - " cachee %1, 0x480(%0); cachee %1, 0x4c0(%0) \n" \ - " cachee %1, 0x500(%0); cachee %1, 0x540(%0) \n" \ - " cachee %1, 0x580(%0); cachee %1, 0x5c0(%0) \n" \ - " cachee %1, 0x600(%0); cachee %1, 0x640(%0) \n" \ - " cachee %1, 0x680(%0); cachee %1, 0x6c0(%0) \n" \ - " cachee %1, 0x700(%0); cachee %1, 0x740(%0) \n" \ - " cachee %1, 0x780(%0); cachee %1, 0x7c0(%0) \n" \ - " .set pop \n" \ - : \ - : "r" (base), \ - "i" (op)); +#define cache_unroll(times, insn, op, addr, lsize) do { \ + int i = 0; \ + unroll(times, _cache_op, insn, op, (addr) + (i++ * (lsize))); \ +} while (0) /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ #define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \ @@ -539,7 +216,8 @@ static inline void extra##blast_##pfx##cache##lsize(void) \ \ for (ws = 0; ws < ws_end; ws += ws_inc) \ for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ + cache_unroll(32, kernel_cache, indexop, \ + addr | ws, lsize); \ } \ \ static inline void extra##blast_##pfx##cache##lsize##_page(unsigned long page) \ @@ -548,7 +226,7 @@ static inline void extra##blast_##pfx##cache##lsize##_page(unsigned long page) \ unsigned long end = page + PAGE_SIZE; \ \ do { \ - cache##lsize##_unroll32(start, hitop); \ + cache_unroll(32, kernel_cache, hitop, start, lsize); \ start += lsize * 32; \ } while (start < end); \ } \ @@ -565,7 +243,8 @@ static inline void extra##blast_##pfx##cache##lsize##_page_indexed(unsigned long \ for (ws = 0; ws < ws_end; ws += ws_inc) \ for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ + cache_unroll(32, kernel_cache, indexop, \ + addr | ws, lsize); \ } __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) @@ -596,7 +275,7 @@ static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \ unsigned long end = page + PAGE_SIZE; \ \ do { \ - cache##lsize##_unroll32_user(start, hitop); \ + cache_unroll(32, user_cache, hitop, start, lsize); \ start += lsize * 32; \ } while (start < end); \ } @@ -688,7 +367,8 @@ static inline void blast_##pfx##cache##lsize##_node(long node) \ \ for (ws = 0; ws < ws_end; ws += ws_inc) \ for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws, indexop); \ + cache_unroll(32, kernel_cache, indexop, \ + addr | ws, lsize); \ } __BUILD_BLAST_CACHE_NODE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) diff --git a/arch/mips/include/asm/sgi/sgi.h b/arch/mips/include/asm/sgi/sgi.h deleted file mode 100644 index b61557151e3f..000000000000 --- a/arch/mips/include/asm/sgi/sgi.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * sgi.h: Definitions specific to SGI machines. - * - * Copyright (C) 1996 David S. Miller (dm@sgi.com) - */ -#ifndef _ASM_SGI_SGI_H -#define _ASM_SGI_SGI_H - -/* UP=UniProcessor MP=MultiProcessor(capable) */ -enum sgi_mach { - ip4, /* R2k UP */ - ip5, /* R2k MP */ - ip6, /* R3k UP */ - ip7, /* R3k MP */ - ip9, /* R3k UP */ - ip12, /* R3kA UP, Indigo */ - ip15, /* R3kA MP */ - ip17, /* R4K UP */ - ip19, /* R4K MP */ - ip20, /* R4K UP, Indigo */ - ip21, /* R8k/TFP MP */ - ip22, /* R4x00 UP, Indy, Indigo2 */ - ip25, /* R10k MP */ - ip26, /* R8k/TFP UP, Indigo2 */ - ip27, /* R10k MP, R12k MP, R14k MP, Origin 200/2k, Onyx2 */ - ip28, /* R10k UP, Indigo2 Impact R10k */ - ip30, /* R10k MP, R12k MP, R14k MP, Octane */ - ip32, /* R5k UP, RM5200 UP, RM7k UP, R10k UP, R12k UP, O2 */ - ip35, /* R14k MP, R16k MP, Origin 300/3k, Onyx3, Fuel, Tezro */ -}; - -extern enum sgi_mach sgimach; -extern void sgi_sysinit(void); - -/* Many I/O space registers are byte sized and are contained within - * one byte per word, specifically the MSB, this macro helps out. - */ -#ifdef __MIPSEL__ -#define SGI_MSB(regaddr) (regaddr) -#else -#define SGI_MSB(regaddr) ((regaddr) | 0x3) -#endif - -#endif /* _ASM_SGI_SGI_H */ diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h index 0d9fad5915fe..80f900417f7e 100644 --- a/arch/mips/include/asm/sgialib.h +++ b/arch/mips/include/asm/sgialib.h @@ -15,14 +15,6 @@ #include <asm/sgiarcs.h> extern struct linux_romvec *romvec; -extern int prom_argc; - -extern LONG *_prom_argv, *_prom_envp; - -/* A 32-bit ARC PROM pass arguments and environment as 32-bit pointer. - These macros take care of sign extension. */ -#define prom_argv(index) ((char *) (long) _prom_argv[(index)]) -#define prom_argc(index) ((char *) (long) _prom_argc[(index)]) extern int prom_flags; @@ -47,12 +39,6 @@ extern void prom_meminit(void); /* PROM device tree library routines. */ #define PROM_NULL_COMPONENT ((pcomponent *) 0) -/* Get sibling component of THIS. */ -extern pcomponent *ArcGetPeer(pcomponent *this); - -/* Get child component of THIS. */ -extern pcomponent *ArcGetChild(pcomponent *this); - /* This is called at prom_init time to identify the * ARC architecture we are running on */ @@ -60,22 +46,16 @@ extern void prom_identify_arch(void); /* Environment variable routines. */ extern PCHAR ArcGetEnvironmentVariable(PCHAR name); -extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); /* ARCS command line parsing. */ -extern void prom_init_cmdline(void); +extern void prom_init_cmdline(int argc, LONG *argv); /* File operations. */ extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt); extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt); /* Misc. routines. */ -extern VOID ArcHalt(VOID) __noreturn; -extern VOID ArcPowerDown(VOID) __noreturn; -extern VOID ArcRestart(VOID) __noreturn; -extern VOID ArcReboot(VOID) __noreturn; extern VOID ArcEnterInteractiveMode(VOID) __noreturn; -extern VOID ArcFlushAllCaches(VOID); extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID); #endif /* _ASM_SGIALIB_H */ diff --git a/arch/mips/include/asm/sgiarcs.h b/arch/mips/include/asm/sgiarcs.h index 105a9479ac5f..e1512cab180b 100644 --- a/arch/mips/include/asm/sgiarcs.h +++ b/arch/mips/include/asm/sgiarcs.h @@ -12,6 +12,8 @@ #ifndef _ASM_SGIARCS_H #define _ASM_SGIARCS_H +#include <linux/kernel.h> + #include <asm/types.h> #include <asm/fw/arc/types.h> @@ -368,110 +370,65 @@ struct linux_smonblock { #if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32) -#define __arc_clobbers \ - "$2", "$3" /* ... */, "$8", "$9", "$10", "$11", \ - "$12", "$13", "$14", "$15", "$16", "$24", "$25", "$31" +extern long call_o32(long vec, void *stack, ...); + +extern u64 o32_stk[4096]; +#define O32_STK (&o32_stk[ARRAY_SIZE(o32_stk)]) #define ARC_CALL0(dest) \ ({ long __res; \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec) \ - : __arc_clobbers, "$4", "$5", "$6", "$7"); \ - (unsigned long) __res; \ + __res = call_o32(__vec, O32_STK); \ + __res; \ }) #define ARC_CALL1(dest, a1) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ + int __a1 = (int) (long) (a1); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1) \ - : __arc_clobbers, "$5", "$6", "$7"); \ - (unsigned long) __res; \ + __res = call_o32(__vec, O32_STK, __a1); \ + __res; \ }) #define ARC_CALL2(dest, a1, a2) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2) \ - : __arc_clobbers, "$6", "$7"); \ + __res = call_o32(__vec, O32_STK, __a1, __a2); \ __res; \ }) #define ARC_CALL3(dest, a1, a2, a3) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ + int __a3 = (int) (long) (a3); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3) \ - : __arc_clobbers, "$7"); \ + __res = call_o32(__vec, O32_STK, __a1, __a2, __a3); \ __res; \ }) #define ARC_CALL4(dest, a1, a2, a3, a4) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - register signed int __a4 __asm__("$7") = (int) (long) (a4); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ + int __a3 = (int) (long) (a3); \ + int __a4 = (int) (long) (a4); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), "r" (__a1), "r" (__a2), "r" (__a3), \ - "r" (__a4) \ - : __arc_clobbers); \ + __res = call_o32(__vec, O32_STK, __a1, __a2, __a3, __a4); \ __res; \ }) -#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ +#define ARC_CALL5(dest, a1, a2, a3, a4, a5) \ ({ long __res; \ - register signed int __a1 __asm__("$4") = (int) (long) (a1); \ - register signed int __a2 __asm__("$5") = (int) (long) (a2); \ - register signed int __a3 __asm__("$6") = (int) (long) (a3); \ - register signed int __a4 __asm__("$7") = (int) (long) (a4); \ - register signed int __a5 = (int) (long) (a5); \ + int __a1 = (int) (long) (a1); \ + int __a2 = (int) (long) (a2); \ + int __a3 = (int) (long) (a3); \ + int __a4 = (int) (long) (a4); \ + int __a5 = (int) (long) (a5); \ long __vec = (long) romvec->dest; \ - __asm__ __volatile__( \ - "dsubu\t$29, 32\n\t" \ - "sw\t%7, 16($29)\n\t" \ - "jalr\t%1\n\t" \ - "daddu\t$29, 32\n\t" \ - "move\t%0, $2" \ - : "=r" (__res), "=r" (__vec) \ - : "1" (__vec), \ - "r" (__a1), "r" (__a2), "r" (__a3), "r" (__a4), \ - "r" (__a5) \ - : __arc_clobbers); \ + __res = call_o32(__vec, O32_STK, __a1, __a2, __a3, __a4, __a5); \ __res; \ }) diff --git a/arch/mips/include/asm/sn/agent.h b/arch/mips/include/asm/sn/agent.h index e33d09293019..7e9b3271737a 100644 --- a/arch/mips/include/asm/sn/agent.h +++ b/arch/mips/include/asm/sn/agent.h @@ -26,7 +26,7 @@ #if defined(CONFIG_SGI_IP27) #define HUB_NIC_ADDR(_cpuid) \ - REMOTE_HUB_ADDR(COMPACT_TO_NASID_NODEID(cpu_to_node(_cpuid)), \ + REMOTE_HUB_ADDR(cpu_to_node(_cpuid), \ MD_MLAN_CTL) #endif diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h index 3f1fb1454749..f7d3273d9599 100644 --- a/arch/mips/include/asm/sn/arch.h +++ b/arch/mips/include/asm/sn/arch.h @@ -19,44 +19,13 @@ #define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid) #define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice) -#define makespnum(_nasid, _slice) \ - (((_nasid) << CPUS_PER_NODE_SHFT) | (_slice)) #define INVALID_NASID (nasid_t)-1 -#define INVALID_CNODEID (cnodeid_t)-1 #define INVALID_PNODEID (pnodeid_t)-1 #define INVALID_MODULE (moduleid_t)-1 #define INVALID_PARTID (partid_t)-1 extern nasid_t get_nasid(void); -extern cnodeid_t get_cpu_cnode(cpuid_t); extern int get_cpu_slice(cpuid_t); -/* - * NO ONE should access these arrays directly. The only reason we refer to - * them here is to avoid the procedure call that would be required in the - * macros below. (Really want private data members here :-) - */ -extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; - -/* - * These macros are used by various parts of the kernel to convert - * between the three different kinds of node numbering. At least some - * of them may change to procedure calls in the future, but the macros - * will continue to work. Don't use the arrays above directly. - */ - -#define NASID_TO_REGION(nnode) \ - ((nnode) >> \ - (is_fine_dirmode() ? NASID_TO_FINEREG_SHFT : NASID_TO_COARSEREG_SHFT)) - -extern cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -extern nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; -extern cnodeid_t cpuid_to_compact_node[MAXCPUS]; - -#define NASID_TO_COMPACT_NODEID(nnode) (nasid_to_compact_node[nnode]) -#define COMPACT_TO_NASID_NODEID(cnode) (compact_to_nasid_node[cnode]) -#define CPUID_TO_COMPACT_NODEID(cpu) (cpuid_to_compact_node[(cpu)]) - #endif /* _ASM_SN_ARCH_H */ diff --git a/arch/mips/include/asm/sn/gda.h b/arch/mips/include/asm/sn/gda.h index 85fa1b5f639d..d52f81620661 100644 --- a/arch/mips/include/asm/sn/gda.h +++ b/arch/mips/include/asm/sn/gda.h @@ -60,9 +60,7 @@ typedef struct gda { /* Pointer to a mask of nodes with copies * of the kernel. */ char g_padding[56]; /* pad out to 128 bytes */ - nasid_t g_nasidtable[MAX_COMPACT_NODES]; /* NASID of each node, - * indexed by cnodeid. - */ + nasid_t g_nasidtable[MAX_NUMNODES]; /* NASID of each node */ } gda_t; #define GDA ((gda_t*) GDA_ADDR(get_nasid())) diff --git a/arch/mips/include/asm/sn/hub.h b/arch/mips/include/asm/sn/hub.h index 338f7eed74f1..45878fbefbae 100644 --- a/arch/mips/include/asm/sn/hub.h +++ b/arch/mips/include/asm/sn/hub.h @@ -10,8 +10,8 @@ #include <asm/xtalk/xtalk.h> /* ip27-hubio.c */ -extern unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, +extern unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size); -extern void hub_pio_init(cnodeid_t cnode); +extern void hub_pio_init(nasid_t nasid); #endif /* __ASM_SN_HUB_H */ diff --git a/arch/mips/include/asm/sn/ioc3.h b/arch/mips/include/asm/sn/ioc3.h index a947eed48fee..78ef760ddde4 100644 --- a/arch/mips/include/asm/sn/ioc3.h +++ b/arch/mips/include/asm/sn/ioc3.h @@ -590,4 +590,13 @@ struct ioc3_etxd { #define MIDR_DATA_MASK 0x0000ffff +/* subsystem IDs supplied by card detection in pci-xtalk-bridge */ +#define IOC3_SUBSYS_IP27_BASEIO6G 0xc300 +#define IOC3_SUBSYS_IP27_MIO 0xc301 +#define IOC3_SUBSYS_IP27_BASEIO 0xc302 +#define IOC3_SUBSYS_IP29_SYSBOARD 0xc303 +#define IOC3_SUBSYS_IP30_SYSBOARD 0xc304 +#define IOC3_SUBSYS_MENET 0xc305 +#define IOC3_SUBSYS_MENET4 0xc306 + #endif /* MIPS_SN_IOC3_H */ diff --git a/arch/mips/include/asm/sn/mapped_kernel.h b/arch/mips/include/asm/sn/mapped_kernel.h index 2f3efa91c16e..3f1049807018 100644 --- a/arch/mips/include/asm/sn/mapped_kernel.h +++ b/arch/mips/include/asm/sn/mapped_kernel.h @@ -37,10 +37,10 @@ #define MAPPED_KERN_RO_TO_PHYS(x) \ ((unsigned long)MAPPED_ADDR_RO_TO_PHYS(x) | \ - MAPPED_KERN_RO_PHYSBASE(get_compact_nodeid())) + MAPPED_KERN_RO_PHYSBASE(get_nasid())) #define MAPPED_KERN_RW_TO_PHYS(x) \ ((unsigned long)MAPPED_ADDR_RW_TO_PHYS(x) | \ - MAPPED_KERN_RW_PHYSBASE(get_compact_nodeid())) + MAPPED_KERN_RW_PHYSBASE(get_nasid())) #else /* CONFIG_MAPPED_KERNEL */ diff --git a/arch/mips/include/asm/sn/sn0/arch.h b/arch/mips/include/asm/sn/sn0/arch.h index 425a67e6a947..12f4c4649ff0 100644 --- a/arch/mips/include/asm/sn/sn0/arch.h +++ b/arch/mips/include/asm/sn/sn0/arch.h @@ -12,25 +12,11 @@ #define _ASM_SN_SN0_ARCH_H -#ifndef SN0XXL /* 128 cpu SMP max */ -/* - * This is the maximum number of nodes that can be part of a kernel. - * Effectively, it's the maximum number of compact node ids (cnodeid_t). - */ -#define MAX_COMPACT_NODES 64 - /* * MAXCPUS refers to the maximum number of CPUs in a single kernel. * This is not necessarily the same as MAXNODES * CPUS_PER_NODE */ -#define MAXCPUS 128 - -#else /* SN0XXL system */ - -#define MAX_COMPACT_NODES 128 -#define MAXCPUS 256 - -#endif /* SN0XXL */ +#define MAXCPUS (MAX_NUMNODES * CPUS_PER_NODE) /* * This is the maximum number of NASIDS that can be present in a system. @@ -66,7 +52,5 @@ #define SLOT_MIN_MEM_SIZE (32*1024*1024) #define CPUS_PER_NODE 2 /* CPUs on a single hub */ -#define CPUS_PER_NODE_SHFT 1 /* Bits to shift in the node number */ -#define CPUS_PER_SUBNODE 2 /* CPUs on a single hub PI */ #endif /* _ASM_SN_SN0_ARCH_H */ diff --git a/arch/mips/include/asm/sn/sn_private.h b/arch/mips/include/asm/sn/sn_private.h index f09ba846c644..63a2c30d81c6 100644 --- a/arch/mips/include/asm/sn/sn_private.h +++ b/arch/mips/include/asm/sn/sn_private.h @@ -7,14 +7,13 @@ extern nasid_t master_nasid; extern void cpu_node_probe(void); -extern cnodeid_t get_compact_nodeid(void); -extern void hub_rtc_init(cnodeid_t); +extern void hub_rtc_init(nasid_t nasid); extern void cpu_time_init(void); extern void per_cpu_init(void); extern void install_cpu_nmi_handler(int slice); extern void install_ipi(void); extern void setup_replication_mask(void); extern void replicate_kernel_text(void); -extern unsigned long node_getfirstfree(cnodeid_t); +extern unsigned long node_getfirstfree(nasid_t nasid); #endif /* __ASM_SN_SN_PRIVATE_H */ diff --git a/arch/mips/include/asm/sn/types.h b/arch/mips/include/asm/sn/types.h index 6d24d4e8b9ed..203c927e84d1 100644 --- a/arch/mips/include/asm/sn/types.h +++ b/arch/mips/include/asm/sn/types.h @@ -12,13 +12,9 @@ #include <linux/types.h> typedef unsigned long cpuid_t; -typedef unsigned long cnodemask_t; typedef signed short nasid_t; /* node id in numa-as-id space */ -typedef signed short cnodeid_t; /* node id in compact-id space */ typedef signed char partid_t; /* partition ID type */ typedef signed short moduleid_t; /* user-visible module number type */ -typedef signed short cmoduleid_t; /* kernel compact module id type */ -typedef unsigned char clusterid_t; /* Clusterid of the cell */ typedef dev_t vertex_hdl_t; /* hardware graph vertex handle */ diff --git a/arch/mips/include/asm/string.h b/arch/mips/include/asm/string.h index 29030cb398ee..1de3bbce8e88 100644 --- a/arch/mips/include/asm/string.h +++ b/arch/mips/include/asm/string.h @@ -10,127 +10,6 @@ #ifndef _ASM_STRING_H #define _ASM_STRING_H - -/* - * Most of the inline functions are rather naive implementations so I just - * didn't bother updating them for 64-bit ... - */ -#ifdef CONFIG_32BIT - -#ifndef IN_STRING_C - -#define __HAVE_ARCH_STRCPY -static __inline__ char *strcpy(char *__dest, __const__ char *__src) -{ - char *__xdest = __dest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%1,1\n\t" - "sb\t$1,(%0)\n\t" - "bnez\t$1,1b\n\t" - "addiu\t%0,1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src) - : "0" (__dest), "1" (__src) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRNCPY -static __inline__ char *strncpy(char *__dest, __const__ char *__src, size_t __n) -{ - char *__xdest = __dest; - - if (__n == 0) - return __xdest; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "sb\t$1,(%0)\n\t" - "beqz\t$1,2f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%2,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__dest), "=r" (__src), "=r" (__n) - : "0" (__dest), "1" (__src), "2" (__n) - : "memory"); - - return __xdest; -} - -#define __HAVE_ARCH_STRCMP -static __inline__ int strcmp(__const__ char *__cs, __const__ char *__ct) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - "lbu\t%2,(%0)\n" - "1:\tlbu\t$1,(%1)\n\t" - "addiu\t%0,1\n\t" - "bne\t$1,%2,2f\n\t" - "addiu\t%1,1\n\t" - "bnez\t%2,1b\n\t" - "lbu\t%2,(%0)\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%2,$1\n" - "2:\tsubu\t%2,$1\n" - "3:\t.set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__res) - : "0" (__cs), "1" (__ct)); - - return __res; -} - -#endif /* !defined(IN_STRING_C) */ - -#define __HAVE_ARCH_STRNCMP -static __inline__ int -strncmp(__const__ char *__cs, __const__ char *__ct, size_t __count) -{ - int __res; - - __asm__ __volatile__( - ".set\tnoreorder\n\t" - ".set\tnoat\n" - "1:\tlbu\t%3,(%0)\n\t" - "beqz\t%2,2f\n\t" - "lbu\t$1,(%1)\n\t" - "subu\t%2,1\n\t" - "bne\t$1,%3,3f\n\t" - "addiu\t%0,1\n\t" - "bnez\t%3,1b\n\t" - "addiu\t%1,1\n" - "2:\n\t" -#if defined(CONFIG_CPU_R3000) - "nop\n\t" -#endif - "move\t%3,$1\n" - "3:\tsubu\t%3,$1\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (__cs), "=r" (__ct), "=r" (__count), "=r" (__res) - : "0" (__cs), "1" (__ct), "2" (__count)); - - return __res; -} -#endif /* CONFIG_32BIT */ - #define __HAVE_ARCH_MEMSET extern void *memset(void *__s, int __c, size_t __count); diff --git a/arch/mips/include/asm/sync.h b/arch/mips/include/asm/sync.h new file mode 100644 index 000000000000..7c6a1095f556 --- /dev/null +++ b/arch/mips/include/asm/sync.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __MIPS_ASM_SYNC_H__ +#define __MIPS_ASM_SYNC_H__ + +/* + * sync types are defined by the MIPS64 Instruction Set documentation in Volume + * II-A of the MIPS Architecture Reference Manual, which can be found here: + * + * https://www.mips.com/?do-download=the-mips64-instruction-set-v6-06 + * + * Two types of barrier are provided: + * + * 1) Completion barriers, which ensure that a memory operation has actually + * completed & often involve stalling the CPU pipeline to do so. + * + * 2) Ordering barriers, which only ensure that affected memory operations + * won't be reordered in the CPU pipeline in a manner that violates the + * restrictions imposed by the barrier. + * + * Ordering barriers can be more efficient than completion barriers, since: + * + * a) Ordering barriers only require memory access instructions which preceed + * them in program order (older instructions) to reach a point in the + * load/store datapath beyond which reordering is not possible before + * allowing memory access instructions which follow them (younger + * instructions) to be performed. That is, older instructions don't + * actually need to complete - they just need to get far enough that all + * other coherent CPUs will observe their completion before they observe + * the effects of younger instructions. + * + * b) Multiple variants of ordering barrier are provided which allow the + * effects to be restricted to different combinations of older or younger + * loads or stores. By way of example, if we only care that stores older + * than a barrier are observed prior to stores that are younger than a + * barrier & don't care about the ordering of loads then the 'wmb' + * ordering barrier can be used. Limiting the barrier's effects to stores + * allows loads to continue unaffected & potentially allows the CPU to + * make progress faster than if younger loads had to wait for older stores + * to complete. + */ + +/* + * No sync instruction at all; used to allow code to nullify the effect of the + * __SYNC() macro without needing lots of #ifdefery. + */ +#define __SYNC_none -1 + +/* + * A full completion barrier; all memory accesses appearing prior to this sync + * instruction in program order must complete before any memory accesses + * appearing after this sync instruction in program order. + */ +#define __SYNC_full 0x00 + +/* + * For now we use a full completion barrier to implement all sync types, until + * we're satisfied that lightweight ordering barriers defined by MIPSr6 are + * sufficient to uphold our desired memory model. + */ +#define __SYNC_aq __SYNC_full +#define __SYNC_rl __SYNC_full +#define __SYNC_mb __SYNC_full + +/* + * ...except on Cavium Octeon CPUs, which have been using the 'wmb' ordering + * barrier since 2010 & omit 'rmb' barriers because the CPUs don't perform + * speculative reads. + */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON +# define __SYNC_rmb __SYNC_none +# define __SYNC_wmb 0x04 +#else +# define __SYNC_rmb __SYNC_full +# define __SYNC_wmb __SYNC_full +#endif + +/* + * A GINV sync is a little different; it doesn't relate directly to loads or + * stores, but instead causes synchronization of an icache or TLB global + * invalidation operation triggered by the ginvi or ginvt instructions + * respectively. In cases where we need to know that a ginvi or ginvt operation + * has been performed by all coherent CPUs, we must issue a sync instruction of + * this type. Once this instruction graduates all coherent CPUs will have + * observed the invalidation. + */ +#define __SYNC_ginv 0x14 + +/* Trivial; indicate that we always need this sync instruction. */ +#define __SYNC_always (1 << 0) + +/* + * Indicate that we need this sync instruction only on systems with weakly + * ordered memory access. In general this is most MIPS systems, but there are + * exceptions which provide strongly ordered memory. + */ +#ifdef CONFIG_WEAK_ORDERING +# define __SYNC_weak_ordering (1 << 1) +#else +# define __SYNC_weak_ordering 0 +#endif + +/* + * Indicate that we need this sync instruction only on systems where LL/SC + * don't implicitly provide a memory barrier. In general this is most MIPS + * systems. + */ +#ifdef CONFIG_WEAK_REORDERING_BEYOND_LLSC +# define __SYNC_weak_llsc (1 << 2) +#else +# define __SYNC_weak_llsc 0 +#endif + +/* + * Some Loongson 3 CPUs have a bug wherein execution of a memory access (load, + * store or prefetch) in between an LL & SC can cause the SC instruction to + * erroneously succeed, breaking atomicity. Whilst it's unusual to write code + * containing such sequences, this bug bites harder than we might otherwise + * expect due to reordering & speculation: + * + * 1) A memory access appearing prior to the LL in program order may actually + * be executed after the LL - this is the reordering case. + * + * In order to avoid this we need to place a memory barrier (ie. a SYNC + * instruction) prior to every LL instruction, in between it and any earlier + * memory access instructions. + * + * This reordering case is fixed by 3A R2 CPUs, ie. 3A2000 models and later. + * + * 2) If a conditional branch exists between an LL & SC with a target outside + * of the LL-SC loop, for example an exit upon value mismatch in cmpxchg() + * or similar, then misprediction of the branch may allow speculative + * execution of memory accesses from outside of the LL-SC loop. + * + * In order to avoid this we need a memory barrier (ie. a SYNC instruction) + * at each affected branch target. + * + * This case affects all current Loongson 3 CPUs. + * + * The above described cases cause an error in the cache coherence protocol; + * such that the Invalidate of a competing LL-SC goes 'missing' and SC + * erroneously observes its core still has Exclusive state and lets the SC + * proceed. + * + * Therefore the error only occurs on SMP systems. + */ +#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS +# define __SYNC_loongson3_war (1 << 31) +#else +# define __SYNC_loongson3_war 0 +#endif + +/* + * Some Cavium Octeon CPUs suffer from a bug that causes a single wmb ordering + * barrier to be ineffective, requiring the use of 2 in sequence to provide an + * effective barrier as noted by commit 6b07d38aaa52 ("MIPS: Octeon: Use + * optimized memory barrier primitives."). Here we specify that the affected + * sync instructions should be emitted twice. + */ +#ifdef CONFIG_CPU_CAVIUM_OCTEON +# define __SYNC_rpt(type) (1 + (type == __SYNC_wmb)) +#else +# define __SYNC_rpt(type) 1 +#endif + +/* + * The main event. Here we actually emit a sync instruction of a given type, if + * reason is non-zero. + * + * In future we have the option of emitting entries in a fixups-style table + * here that would allow us to opportunistically remove some sync instructions + * when we detect at runtime that we're running on a CPU that doesn't need + * them. + */ +#ifdef CONFIG_CPU_HAS_SYNC +# define ____SYNC(_type, _reason, _else) \ + .if (( _type ) != -1) && ( _reason ); \ + .set push; \ + .set MIPS_ISA_LEVEL_RAW; \ + .rept __SYNC_rpt(_type); \ + sync _type; \ + .endr; \ + .set pop; \ + .else; \ + _else; \ + .endif +#else +# define ____SYNC(_type, _reason, _else) +#endif + +/* + * Preprocessor magic to expand macros used as arguments before we insert them + * into assembly code. + */ +#ifdef __ASSEMBLY__ +# define ___SYNC(type, reason, else) \ + ____SYNC(type, reason, else) +#else +# define ___SYNC(type, reason, else) \ + __stringify(____SYNC(type, reason, else)) +#endif + +#define __SYNC(type, reason) \ + ___SYNC(__SYNC_##type, __SYNC_##reason, ) +#define __SYNC_ELSE(type, reason, else) \ + ___SYNC(__SYNC_##type, __SYNC_##reason, else) + +#endif /* __MIPS_ASM_SYNC_H__ */ diff --git a/arch/mips/include/asm/unroll.h b/arch/mips/include/asm/unroll.h new file mode 100644 index 000000000000..c628747d4ecd --- /dev/null +++ b/arch/mips/include/asm/unroll.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef __ASM_UNROLL_H__ +#define __ASM_UNROLL_H__ + +/* + * Explicitly unroll a loop, for use in cases where doing so is performance + * critical. + * + * Ideally we'd rely upon the compiler to provide this but there's no commonly + * available means to do so. For example GCC's "#pragma GCC unroll" + * functionality would be ideal but is only available from GCC 8 onwards. Using + * -funroll-loops is an option but GCC tends to make poor choices when + * compiling our string functions. -funroll-all-loops leads to massive code + * bloat, even if only applied to the string functions. + */ +#define unroll(times, fn, ...) do { \ + extern void bad_unroll(void) \ + __compiletime_error("Unsupported unroll"); \ + \ + /* \ + * We can't unroll if the number of iterations isn't \ + * compile-time constant. Unfortunately GCC versions \ + * up until 4.6 tend to miss obvious constants & cause \ + * this check to fail, even though they go on to \ + * generate reasonable code for the switch statement, \ + * so we skip the sanity check for those compilers. \ + */ \ + BUILD_BUG_ON((CONFIG_GCC_VERSION >= 40700 || \ + CONFIG_CLANG_VERSION >= 80000) && \ + !__builtin_constant_p(times)); \ + \ + switch (times) { \ + case 32: fn(__VA_ARGS__); /* fall through */ \ + case 31: fn(__VA_ARGS__); /* fall through */ \ + case 30: fn(__VA_ARGS__); /* fall through */ \ + case 29: fn(__VA_ARGS__); /* fall through */ \ + case 28: fn(__VA_ARGS__); /* fall through */ \ + case 27: fn(__VA_ARGS__); /* fall through */ \ + case 26: fn(__VA_ARGS__); /* fall through */ \ + case 25: fn(__VA_ARGS__); /* fall through */ \ + case 24: fn(__VA_ARGS__); /* fall through */ \ + case 23: fn(__VA_ARGS__); /* fall through */ \ + case 22: fn(__VA_ARGS__); /* fall through */ \ + case 21: fn(__VA_ARGS__); /* fall through */ \ + case 20: fn(__VA_ARGS__); /* fall through */ \ + case 19: fn(__VA_ARGS__); /* fall through */ \ + case 18: fn(__VA_ARGS__); /* fall through */ \ + case 17: fn(__VA_ARGS__); /* fall through */ \ + case 16: fn(__VA_ARGS__); /* fall through */ \ + case 15: fn(__VA_ARGS__); /* fall through */ \ + case 14: fn(__VA_ARGS__); /* fall through */ \ + case 13: fn(__VA_ARGS__); /* fall through */ \ + case 12: fn(__VA_ARGS__); /* fall through */ \ + case 11: fn(__VA_ARGS__); /* fall through */ \ + case 10: fn(__VA_ARGS__); /* fall through */ \ + case 9: fn(__VA_ARGS__); /* fall through */ \ + case 8: fn(__VA_ARGS__); /* fall through */ \ + case 7: fn(__VA_ARGS__); /* fall through */ \ + case 6: fn(__VA_ARGS__); /* fall through */ \ + case 5: fn(__VA_ARGS__); /* fall through */ \ + case 4: fn(__VA_ARGS__); /* fall through */ \ + case 3: fn(__VA_ARGS__); /* fall through */ \ + case 2: fn(__VA_ARGS__); /* fall through */ \ + case 1: fn(__VA_ARGS__); /* fall through */ \ + case 0: break; \ + \ + default: \ + /* \ + * Either the iteration count is unreasonable \ + * or we need to add more cases above. \ + */ \ + bad_unroll(); \ + break; \ + } \ +} while (0) + +#endif /* __ASM_UNROLL_H__ */ diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 89b07ea8d249..d6e97df51cfb 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -80,7 +80,7 @@ obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o -obj-$(CONFIG_64BIT) += cpu-bugs64.o +obj-$(CONFIG_CPU_R4X00_BUGS64) += r4k-bugs64.o obj-$(CONFIG_I8253) += i8253.o diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f521cbf934e7..c849991548bb 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -608,7 +608,7 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, enum ftlb_flags flags) if (!(flags & FTLB_EN)) return 1; return 0; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Flush ITLB, DTLB, VTLB and FTLB */ write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB | LOONGSON_DIAG_VTLB | LOONGSON_DIAG_FTLB); @@ -1526,24 +1526,24 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST; c->tlbsize = 64; break; - case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */ + case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_LOONGSON2E: - c->cputype = CPU_LOONGSON2; + c->cputype = CPU_LOONGSON2EF; __cpu_name[cpu] = "ICT Loongson-2"; set_elf_platform(cpu, "loongson2e"); set_isa(c, MIPS_CPU_ISA_III); c->fpu_msk31 |= FPU_CSR_CONDX; break; case PRID_REV_LOONGSON2F: - c->cputype = CPU_LOONGSON2; + c->cputype = CPU_LOONGSON2EF; __cpu_name[cpu] = "ICT Loongson-2"; set_elf_platform(cpu, "loongson2f"); set_isa(c, MIPS_CPU_ISA_III); c->fpu_msk31 |= FPU_CSR_CONDX; break; case PRID_REV_LOONGSON3A_R1: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R1); @@ -1552,7 +1552,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) break; case PRID_REV_LOONGSON3B_R1: case PRID_REV_LOONGSON3B_R2: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3b"); set_isa(c, MIPS_CPU_ISA_M64R1); @@ -1565,6 +1565,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) MIPS_CPU_FPU | MIPS_CPU_LLSC | MIPS_CPU_32FPR; c->tlbsize = 64; + set_cpu_asid_mask(c, MIPS_ENTRYHI_ASID); c->writecombine = _CACHE_UNCACHED_ACCELERATED; break; case PRID_IMP_LOONGSON_32: /* Loongson-1 */ @@ -1903,18 +1904,18 @@ platform: static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) { switch (c->processor_id & PRID_IMP_MASK) { - case PRID_IMP_LOONGSON_64: /* Loongson-2/3 */ + case PRID_IMP_LOONGSON_64C: /* Loongson-2/3 */ switch (c->processor_id & PRID_REV_MASK) { case PRID_REV_LOONGSON3A_R2_0: case PRID_REV_LOONGSON3A_R2_1: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R2); break; case PRID_REV_LOONGSON3A_R3_0: case PRID_REV_LOONGSON3A_R3_1: - c->cputype = CPU_LOONGSON3; + c->cputype = CPU_LOONGSON64; __cpu_name[cpu] = "ICT Loongson-3"; set_elf_platform(cpu, "loongson3a"); set_isa(c, MIPS_CPU_ISA_M64R2); @@ -1927,6 +1928,17 @@ static inline void cpu_probe_loongson(struct cpuinfo_mips *c, unsigned int cpu) c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); break; + case PRID_IMP_LOONGSON_64G: + c->cputype = CPU_LOONGSON64; + __cpu_name[cpu] = "ICT Loongson-3"; + set_elf_platform(cpu, "loongson3a"); + set_isa(c, MIPS_CPU_ISA_M64R2); + decode_configs(c); + c->options |= MIPS_CPU_FTLB | MIPS_CPU_TLBINV | MIPS_CPU_LDPTE; + c->writecombine = _CACHE_UNCACHED_ACCELERATED; + c->ases |= (MIPS_ASE_LOONGSON_MMI | MIPS_ASE_LOONGSON_CAM | + MIPS_ASE_LOONGSON_EXT | MIPS_ASE_LOONGSON_EXT2); + break; default: panic("Unknown Loongson Processor ID!"); break; diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index efde27c99414..0a43c9125267 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -18,6 +18,7 @@ #include <asm/fpregdef.h> #include <asm/mipsregs.h> #include <asm/stackframe.h> +#include <asm/sync.h> #include <asm/war.h> #include <asm/thread_info.h> @@ -353,8 +354,9 @@ NESTED(ejtag_debug_handler, PT_SIZE, sp) #ifdef CONFIG_SMP 1: PTR_LA k0, ejtag_debug_buffer_spinlock - ll k0, 0(k0) - bnez k0, 1b + __SYNC(full, loongson3_war) +2: ll k0, 0(k0) + bnez k0, 2b PTR_LA k0, ejtag_debug_buffer_spinlock sc k0, 0(k0) beqz k0, 1b @@ -657,7 +659,7 @@ isrdhwr: .set pop END(handle_ri_rdhwr) -#ifdef CONFIG_64BIT +#ifdef CONFIG_CPU_R4X00_BUGS64 /* A temporary overflow handler used by check_daddi(). */ __INIT diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c index eb2afc0b8db1..57dfa6c9edc5 100644 --- a/arch/mips/kernel/idle.c +++ b/arch/mips/kernel/idle.c @@ -178,8 +178,9 @@ void __init check_wait(void) case CPU_XLP: cpu_wait = r4k_wait; break; - case CPU_LOONGSON3: - if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2_0) + case CPU_LOONGSON64: + if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)) cpu_wait = r4k_wait; break; diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index a3e2da8391ea..0af456a94916 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -1623,7 +1623,7 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN; break; } @@ -1769,7 +1769,7 @@ init_hw_perf_events(void) mipspmu.general_event_map = &mipsxxcore_event_map; mipspmu.cache_event_map = &mipsxxcore_cache_map; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: mipspmu.name = "mips/loongson3"; mipspmu.general_event_map = &loongson3_event_map; mipspmu.cache_event_map = &loongson3_cache_map; diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c index a26f40db15d0..9bf60d7d44d3 100644 --- a/arch/mips/kernel/pm-cps.c +++ b/arch/mips/kernel/pm-cps.c @@ -307,7 +307,7 @@ static int cps_gen_flush_fsb(u32 **pp, struct uasm_label **pl, } /* Barrier ensuring previous cache invalidates are complete */ - uasm_i_sync(pp, STYPE_SYNC); + uasm_i_sync(pp, __SYNC_full); uasm_i_ehb(pp); /* Check whether the pipeline stalled due to the FSB being full */ @@ -397,7 +397,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) if (coupled_coherence) { /* Increment ready_count */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); uasm_build_label(&l, p, lbl_incready); uasm_i_ll(&p, t1, 0, r_nc_count); uasm_i_addiu(&p, t2, t1, 1); @@ -406,7 +406,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_addiu(&p, t1, t1, 1); /* Barrier ensuring all CPUs see the updated r_nc_count value */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); /* * If this is the last VPE to become ready for non-coherence @@ -473,7 +473,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) Index_Writeback_Inv_D, lbl_flushdcache); /* Barrier ensuring previous cache invalidates are complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); if (mips_cm_revision() < CM_REV_CM3) { @@ -487,7 +487,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_lw(&p, t0, 0, r_pcohctl); /* Barrier to ensure write to coherence control is complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); } @@ -534,7 +534,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) } /* Barrier to ensure write to CPC command is complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); } @@ -572,13 +572,13 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_lw(&p, t0, 0, r_pcohctl); /* Barrier to ensure write to coherence control is complete */ - uasm_i_sync(&p, STYPE_SYNC); + uasm_i_sync(&p, __SYNC_full); uasm_i_ehb(&p); if (coupled_coherence && (state == CPS_PM_NC_WAIT)) { /* Decrement ready_count */ uasm_build_label(&l, p, lbl_decready); - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); uasm_i_ll(&p, t1, 0, r_nc_count); uasm_i_addiu(&p, t2, t1, -1); uasm_i_sc(&p, t2, 0, r_nc_count); @@ -586,7 +586,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_i_andi(&p, v0, t1, (1 << fls(smp_num_siblings)) - 1); /* Barrier ensuring all CPUs see the updated r_nc_count value */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); } if (coupled_coherence && (state == CPS_PM_CLOCK_GATED)) { @@ -608,7 +608,7 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) uasm_build_label(&l, p, lbl_secondary_cont); /* Barrier ensuring all CPUs see the updated r_nc_count value */ - uasm_i_sync(&p, STYPE_SYNC_MB); + uasm_i_sync(&p, __SYNC_mb); } /* The core is coherent, time to return to C code */ diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/r4k-bugs64.c index 6a7afe7ef4d3..1ff19f1ea5ca 100644 --- a/arch/mips/kernel/cpu-bugs64.c +++ b/arch/mips/kernel/r4k-bugs64.c @@ -242,7 +242,7 @@ static __init void check_daddi(void) panic(bug64hit, !DADDI_WAR ? daddiwar : nowar); } -int daddiu_bug = IS_ENABLED(CONFIG_CPU_MIPSR6) ? 0 : -1; +int daddiu_bug = -1; static __init void check_daddiu(void) { @@ -312,14 +312,11 @@ static __init void check_daddiu(void) void __init check_bugs64_early(void) { - if (!IS_ENABLED(CONFIG_CPU_MIPSR6)) { - check_mult_sh(); - check_daddiu(); - } + check_mult_sh(); + check_daddiu(); } void __init check_bugs64(void) { - if (!IS_ENABLED(CONFIG_CPU_MIPSR6)) - check_daddi(); + check_daddi(); } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 5eec13b8d222..c3d4212b5f1d 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -67,7 +67,9 @@ static char __initdata command_line[COMMAND_LINE_SIZE]; char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; #ifdef CONFIG_CMDLINE_BOOL -static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; +static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE; +#else +static const char builtin_cmdline[] __initconst = ""; #endif /* @@ -285,7 +287,7 @@ static unsigned long __init init_initrd(void) * Initialize the bootmem allocator. It also setup initrd related data * if needed. */ -#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA)) +#if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA)) static void __init bootmem_init(void) { @@ -538,11 +540,94 @@ static void __init check_kernel_sections_mem(void) } } -#define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER) -#define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) -#define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) -#define BUILTIN_EXTEND_WITH_PROM \ - IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND) +static void __init bootcmdline_append(const char *s, size_t max) +{ + if (!s[0] || !max) + return; + + if (boot_command_line[0]) + strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); + + strlcat(boot_command_line, s, max); +} + +#ifdef CONFIG_OF_EARLY_FLATTREE + +static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, + int depth, void *data) +{ + bool *dt_bootargs = data; + const char *p; + int l; + + if (depth != 1 || !data || + (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) + return 0; + + p = of_get_flat_dt_prop(node, "bootargs", &l); + if (p != NULL && l > 0) { + bootcmdline_append(p, min(l, COMMAND_LINE_SIZE)); + *dt_bootargs = true; + } + + return 1; +} + +#endif /* CONFIG_OF_EARLY_FLATTREE */ + +static void __init bootcmdline_init(char **cmdline_p) +{ + bool dt_bootargs = false; + + /* + * If CMDLINE_OVERRIDE is enabled then initializing the command line is + * trivial - we simply use the built-in command line unconditionally & + * unmodified. + */ + if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + return; + } + + /* + * If the user specified a built-in command line & + * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is + * prepended to arguments from the bootloader or DT so we'll copy them + * to the start of boot_command_line here. Otherwise, empty + * boot_command_line to undo anything early_init_dt_scan_chosen() did. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) + strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); + else + boot_command_line[0] = 0; + +#ifdef CONFIG_OF_EARLY_FLATTREE + /* + * If we're configured to take boot arguments from DT, look for those + * now. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB)) + of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); +#endif + + /* + * If we didn't get any arguments from DT (regardless of whether that's + * because we weren't configured to look for them, or because we looked + * & found none) then we'll take arguments from the bootloader. + * plat_mem_setup() should have filled arcs_cmdline with arguments from + * the bootloader. + */ + if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) + bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); + + /* + * If the user specified a built-in command line & we didn't already + * prepend it, we append it to boot_command_line here. + */ + if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && + !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) + bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); +} /* * arch_mem_init - initialize memory management subsystem @@ -570,48 +655,12 @@ static void __init arch_mem_init(char **cmdline_p) { extern void plat_mem_setup(void); - /* - * Initialize boot_command_line to an innocuous but non-empty string in - * order to prevent early_init_dt_scan_chosen() from copying - * CONFIG_CMDLINE into it without our knowledge. We handle - * CONFIG_CMDLINE ourselves below & don't want to duplicate its - * content because repeating arguments can be problematic. - */ - strlcpy(boot_command_line, " ", COMMAND_LINE_SIZE); - /* call board setup routine */ plat_mem_setup(); memblock_set_bottom_up(true); -#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) - strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); -#else - if ((USE_PROM_CMDLINE && arcs_cmdline[0]) || - (USE_DTB_CMDLINE && !boot_command_line[0])) - strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); - - if (EXTEND_WITH_PROM && arcs_cmdline[0]) { - if (boot_command_line[0]) - strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); - } - -#if defined(CONFIG_CMDLINE_BOOL) - if (builtin_cmdline[0]) { - if (boot_command_line[0]) - strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); - } - - if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) { - if (boot_command_line[0]) - strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); - } -#endif -#endif + bootcmdline_init(cmdline_p); strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); - *cmdline_p = command_line; parse_early_param(); diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 3f16f3823031..c333e5788664 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -37,6 +37,7 @@ #include <asm/signal.h> #include <asm/sim.h> #include <asm/shmparam.h> +#include <asm/sync.h> #include <asm/sysmips.h> #include <asm/switch_to.h> @@ -133,12 +134,12 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new) [efault] "i" (-EFAULT) : "memory"); } else if (cpu_has_llsc) { - loongson_llsc_mb(); __asm__ __volatile__ ( " .set push \n" " .set "MIPS_ISA_ARCH_LEVEL" \n" " li %[err], 0 \n" "1: \n" + " " __SYNC(full, loongson3_war) " \n" user_ll("%[old]", "(%[addr])") " move %[tmp], %[new] \n" "2: \n" diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 342e41de9d64..0c2570e6fcf6 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2394,7 +2394,7 @@ void __init trap_init(void) else { if (cpu_has_vtag_icache) set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp); - else if (current_cpu_type() == CPU_LOONGSON3) + else if (current_cpu_type() == CPU_LOONGSON64) set_except_vector(EXCCODE_RI, handle_ri_rdhwr_tlbp); else set_except_vector(EXCCODE_RI, handle_ri_rdhwr); diff --git a/arch/mips/lib/bitops.c b/arch/mips/lib/bitops.c index 3b2a1e78a543..116d0bd8b2ae 100644 --- a/arch/mips/lib/bitops.c +++ b/arch/mips/lib/bitops.c @@ -7,6 +7,7 @@ * Copyright (c) 1999, 2000 Silicon Graphics, Inc. */ #include <linux/bitops.h> +#include <linux/bits.h> #include <linux/irqflags.h> #include <linux/export.h> @@ -19,12 +20,11 @@ */ void __mips_set_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); *a |= mask; @@ -41,12 +41,11 @@ EXPORT_SYMBOL(__mips_set_bit); */ void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); *a &= ~mask; @@ -63,12 +62,11 @@ EXPORT_SYMBOL(__mips_clear_bit); */ void __mips_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); *a ^= mask; @@ -78,32 +76,6 @@ EXPORT_SYMBOL(__mips_change_bit); /** - * __mips_test_and_set_bit - Set a bit and return its old value. This is - * called by test_and_set_bit() if it cannot find a faster solution. - * @nr: Bit to set - * @addr: Address to count from - */ -int __mips_test_and_set_bit(unsigned long nr, - volatile unsigned long *addr) -{ - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; - unsigned long mask; - unsigned long flags; - int res; - - a += nr >> SZLONG_LOG; - mask = 1UL << bit; - raw_local_irq_save(flags); - res = (mask & *a) != 0; - *a |= mask; - raw_local_irq_restore(flags); - return res; -} -EXPORT_SYMBOL(__mips_test_and_set_bit); - - -/** * __mips_test_and_set_bit_lock - Set a bit and return its old value. This is * called by test_and_set_bit_lock() if it cannot find a faster solution. * @nr: Bit to set @@ -112,13 +84,12 @@ EXPORT_SYMBOL(__mips_test_and_set_bit); int __mips_test_and_set_bit_lock(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; int res; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); res = (mask & *a) != 0; @@ -137,13 +108,12 @@ EXPORT_SYMBOL(__mips_test_and_set_bit_lock); */ int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; int res; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); res = (mask & *a) != 0; @@ -162,13 +132,12 @@ EXPORT_SYMBOL(__mips_test_and_clear_bit); */ int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr) { - unsigned long *a = (unsigned long *)addr; - unsigned bit = nr & SZLONG_MASK; + volatile unsigned long *a = &addr[BIT_WORD(nr)]; + unsigned int bit = nr % BITS_PER_LONG; unsigned long mask; unsigned long flags; int res; - a += nr >> SZLONG_LOG; mask = 1UL << bit; raw_local_irq_save(flags); res = (mask & *a) != 0; diff --git a/arch/mips/lib/csum_partial.S b/arch/mips/lib/csum_partial.S index 2ff84f4b1717..fda7b57b826e 100644 --- a/arch/mips/lib/csum_partial.S +++ b/arch/mips/lib/csum_partial.S @@ -279,7 +279,7 @@ EXPORT_SYMBOL(csum_partial) #endif /* odd buffer alignment? */ -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64) .set push .set arch=mips32r2 wsbh v1, sum @@ -732,7 +732,7 @@ EXPORT_SYMBOL(csum_partial) addu sum, v1 #endif -#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_LOONGSON64) .set push .set arch=mips32r2 wsbh v1, sum diff --git a/arch/mips/loongson2ef/Kconfig b/arch/mips/loongson2ef/Kconfig new file mode 100644 index 000000000000..66a584a833e5 --- /dev/null +++ b/arch/mips/loongson2ef/Kconfig @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0 +if MACH_LOONGSON2EF + +choice + prompt "Machine Type" + +config LEMOTE_FULOONG2E + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2E + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select FORCE_PCI + select I8259 + select ISA + select IRQ_MIPS_CPU + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + select LOONGSON_MC146818 + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. + +config LEMOTE_MACH2F + bool "Lemote Loongson 2F family machines" + select ARCH_SPARSEMEM_ENABLE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_MIGHT_HAVE_PC_SERIO + select BOARD_SCACHE + select BOOT_ELF32 + select CEVT_R4K if ! MIPS_EXTERNAL_TIMER + select CPU_HAS_WB + select CS5536 + select CSRC_R4K if ! MIPS_EXTERNAL_TIMER + select DMA_NONCOHERENT + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select HAVE_CLK + select FORCE_PCI + select I8259 + select IRQ_MIPS_CPU + select ISA + select SYS_HAS_CPU_LOONGSON2F + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_HIGHMEM + select SYS_SUPPORTS_LITTLE_ENDIAN + select LOONGSON_MC146818 + help + Lemote Loongson 2F family machines utilize the 2F revision of + Loongson processor and the AMD CS5536 south bridge. + + These family machines include fuloong2f mini PC, yeeloong2f notebook, + LingLoong allinone PC and so forth. + +endchoice + +config CS5536 + bool + +config CS5536_MFGPT + bool "CS5536 MFGPT Timer" + depends on CS5536 && !HIGH_RES_TIMERS + select MIPS_EXTERNAL_TIMER + help + This option enables the mfgpt0 timer of AMD CS5536. With this timer + switched on you can not use high resolution timers. + + If you want to enable the Loongson2 CPUFreq Driver, Please enable + this option at first, otherwise, You will get wrong system time. + + If unsure, say Yes. + +config LOONGSON_UART_BASE + bool + default y + depends on EARLY_PRINTK || SERIAL_8250 + +config LOONGSON_MC146818 + bool + default n + +endif # MACH_LOONGSON2EF diff --git a/arch/mips/loongson2ef/Makefile b/arch/mips/loongson2ef/Makefile new file mode 100644 index 000000000000..d4af1605cc9b --- /dev/null +++ b/arch/mips/loongson2ef/Makefile @@ -0,0 +1,18 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Common code for all Loongson based systems +# + +obj-$(CONFIG_MACH_LOONGSON2EF) += common/ + +# +# Lemote Fuloong mini-PC (Loongson 2E-based) +# + +obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ + +# +# Lemote loongson2f family machines +# + +obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ diff --git a/arch/mips/loongson2ef/Platform b/arch/mips/loongson2ef/Platform new file mode 100644 index 000000000000..3aca42963f35 --- /dev/null +++ b/arch/mips/loongson2ef/Platform @@ -0,0 +1,32 @@ +# +# Loongson Processors' Support +# + +# Only gcc >= 4.4 have Loongson specific support +cflags-$(CONFIG_CPU_LOONGSON2EF) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON2E) += \ + $(call cc-option,-march=loongson2e,-march=r4600) +cflags-$(CONFIG_CPU_LOONGSON2F) += \ + $(call cc-option,-march=loongson2f,-march=r4600) +# Enable the workarounds for Loongson2f +ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) + else + cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop + endif + ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) + $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) + else + cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump + endif +endif + +# +# Loongson Machines' Support +# + +platform-$(CONFIG_MACH_LOONGSON2EF) += loongson2ef/ +cflags-$(CONFIG_MACH_LOONGSON2EF) += -I$(srctree)/arch/mips/include/asm/mach-loongson2ef -mno-branch-likely +load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson2ef/common/Makefile index 684624f61f5a..684624f61f5a 100644 --- a/arch/mips/loongson64/common/Makefile +++ b/arch/mips/loongson2ef/common/Makefile diff --git a/arch/mips/loongson64/common/bonito-irq.c b/arch/mips/loongson2ef/common/bonito-irq.c index 82352cc25e4c..82352cc25e4c 100644 --- a/arch/mips/loongson64/common/bonito-irq.c +++ b/arch/mips/loongson2ef/common/bonito-irq.c diff --git a/arch/mips/loongson64/common/cmdline.c b/arch/mips/loongson2ef/common/cmdline.c index a735460682cf..a735460682cf 100644 --- a/arch/mips/loongson64/common/cmdline.c +++ b/arch/mips/loongson2ef/common/cmdline.c diff --git a/arch/mips/loongson64/common/cs5536/Makefile b/arch/mips/loongson2ef/common/cs5536/Makefile index b32b29661245..b32b29661245 100644 --- a/arch/mips/loongson64/common/cs5536/Makefile +++ b/arch/mips/loongson2ef/common/cs5536/Makefile diff --git a/arch/mips/loongson64/common/cs5536/cs5536_acc.c b/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c index ff50aae72916..ff50aae72916 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_acc.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c index bd4c39fe6109..bd4c39fe6109 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ehci.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ide.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c index bb933294b092..bb933294b092 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ide.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_isa.c b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c index 5ad38f86ee62..5ad38f86ee62 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_isa.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c index 30af1b7c7529..30af1b7c7529 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c index 71a52b120317..71a52b120317 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_ohci.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c diff --git a/arch/mips/loongson64/common/cs5536/cs5536_pci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c index 202c89b568ba..202c89b568ba 100644 --- a/arch/mips/loongson64/common/cs5536/cs5536_pci.c +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c diff --git a/arch/mips/loongson64/common/early_printk.c b/arch/mips/loongson2ef/common/early_printk.c index 5e2a151aa30c..d90c5e5a0e78 100644 --- a/arch/mips/loongson64/common/early_printk.c +++ b/arch/mips/loongson2ef/common/early_printk.c @@ -27,7 +27,7 @@ void prom_putchar(char c) int timeout; unsigned char *uart_base; - uart_base = (unsigned char *)_loongson_uart_base[0]; + uart_base = (unsigned char *)_loongson_uart_base; timeout = 1024; while (((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) && diff --git a/arch/mips/loongson2ef/common/env.c b/arch/mips/loongson2ef/common/env.c new file mode 100644 index 000000000000..29c5fecb8282 --- /dev/null +++ b/arch/mips/loongson2ef/common/env.c @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <linux/export.h> +#include <asm/bootinfo.h> +#include <loongson.h> + +u32 cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); + +unsigned long long smp_group[4]; + +#define parse_even_earlier(res, option, p) \ +do { \ + unsigned int tmp __maybe_unused; \ + \ + if (strncmp(option, (char *)p, strlen(option)) == 0) \ + tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ +} while (0) + +void __init prom_init_env(void) +{ + /* pmon passes arguments in 32bit pointers */ + unsigned int processor_id; + int *_prom_envp; + long l; + + /* firmware arguments are initialized in head.S */ + _prom_envp = (int *)fw_arg2; + + l = (long)*_prom_envp; + while (l != 0) { + parse_even_earlier(cpu_clock_freq, "cpuclock", l); + parse_even_earlier(memsize, "memsize", l); + parse_even_earlier(highmemsize, "highmemsize", l); + _prom_envp++; + l = (long)*_prom_envp; + } + if (memsize == 0) + memsize = 256; + + pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); + + if (cpu_clock_freq == 0) { + processor_id = (¤t_cpu_data)->processor_id; + switch (processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + cpu_clock_freq = 533080000; + break; + case PRID_REV_LOONGSON2F: + cpu_clock_freq = 797000000; + break; + default: + cpu_clock_freq = 100000000; + break; + } + } + pr_info("CpuClock = %u\n", cpu_clock_freq); +} diff --git a/arch/mips/loongson64/common/init.c b/arch/mips/loongson2ef/common/init.c index 912fe61c4fc7..a45430365729 100644 --- a/arch/mips/loongson64/common/init.c +++ b/arch/mips/loongson2ef/common/init.c @@ -38,12 +38,7 @@ void __init prom_init(void) /* init base address of io space */ set_io_port_base((unsigned long) ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); - -#ifdef CONFIG_NUMA - prom_init_numa_memory(); -#else prom_init_memory(); -#endif /*init the uart base address */ prom_init_uart_base(); diff --git a/arch/mips/loongson64/common/irq.c b/arch/mips/loongson2ef/common/irq.c index 0ea93c1c0a97..0ea93c1c0a97 100644 --- a/arch/mips/loongson64/common/irq.c +++ b/arch/mips/loongson2ef/common/irq.c diff --git a/arch/mips/loongson64/common/machtype.c b/arch/mips/loongson2ef/common/machtype.c index 4e42d929f1c7..82f6de49f20f 100644 --- a/arch/mips/loongson64/common/machtype.c +++ b/arch/mips/loongson2ef/common/machtype.c @@ -23,7 +23,6 @@ static const char *system_types[] = { [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", [MACH_LEMOTE_NAS] = "lemote-nas-2f", [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", - [MACH_LOONGSON_GENERIC] = "generic-loongson-machine", [MACH_LOONGSON_END] = NULL, }; diff --git a/arch/mips/loongson64/common/mem.c b/arch/mips/loongson2ef/common/mem.c index 4254ac4ec616..11bf6eefb82a 100644 --- a/arch/mips/loongson64/common/mem.c +++ b/arch/mips/loongson2ef/common/mem.c @@ -9,11 +9,9 @@ #include <asm/bootinfo.h> #include <loongson.h> -#include <boot_param.h> #include <mem.h> #include <pci.h> -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE u32 memsize, highmemsize; @@ -52,41 +50,6 @@ void __init prom_init_memory(void) #endif /* !CONFIG_64BIT */ } -#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - -void __init prom_init_memory(void) -{ - int i; - u32 node_id; - u32 mem_type; - - /* parse memory information */ - for (i = 0; i < loongson_memmap->nr_map; i++) { - node_id = loongson_memmap->map[i].node_id; - mem_type = loongson_memmap->map[i].mem_type; - - if (node_id != 0) - continue; - - switch (mem_type) { - case SYSTEM_RAM_LOW: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_HIGH: - memblock_add(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - case SYSTEM_RAM_RESERVED: - memblock_reserve(loongson_memmap->map[i].mem_start, - (u64)loongson_memmap->map[i].mem_size << 20); - break; - } - } -} - -#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */ - /* override of arch/mips/mm/cache.c: __uncached_access */ int __uncached_access(struct file *file, unsigned long addr) { diff --git a/arch/mips/loongson2ef/common/pci.c b/arch/mips/loongson2ef/common/pci.c new file mode 100644 index 000000000000..200916925e95 --- /dev/null +++ b/arch/mips/loongson2ef/common/pci.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/pci.h> + +#include <pci.h> +#include <loongson.h> + +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson_pci_controller = { + .pci_ops = &loongson_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +static void __init setup_pcimap(void) +{ + /* + * local to PCI mapping for CPU accessing PCI space + * CPU address space [256M,448M] is window for accessing pci space + * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] + * + * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 + * [<2G] [384M,448M] [320M,384M] [0M,64M] + */ + LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | + LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | + LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | + LOONGSON_PCIMAP_WIN(0, 0); + + /* + * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] + */ + LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + /* size: 256M, burst transmission, pre-fetch enable, 64bit */ + LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; + LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; + LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; + LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; + + /* avoid deadlock of PCI reading/writing lock operation */ + LOONGSON_PCI_ISR4C = 0xd2000001ul; + + /* can not change gnt to break pci transfer when device's gnt not + deassert for some broken device */ + LOONGSON_PXARB_CFG = 0x00fe0105ul; + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + /* + * set cpu addr window2 to map CPU address space to PCI address space + */ + LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, + LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); +#endif +} + +extern int sbx00_acpi_init(void); + +static int __init pcibios_init(void) +{ + setup_pcimap(); + + loongson_pci_controller.io_map_base = mips_io_port_base; + register_pci_controller(&loongson_pci_controller); + + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/loongson64/common/platform.c b/arch/mips/loongson2ef/common/platform.c index 0084820cffaa..0084820cffaa 100644 --- a/arch/mips/loongson64/common/platform.c +++ b/arch/mips/loongson2ef/common/platform.c diff --git a/arch/mips/loongson64/common/pm.c b/arch/mips/loongson2ef/common/pm.c index b8aed878d912..11f4cfd581fb 100644 --- a/arch/mips/loongson64/common/pm.c +++ b/arch/mips/loongson2ef/common/pm.c @@ -75,7 +75,7 @@ int __weak wakeup_loongson(void) static void wait_for_wakeup_events(void) { while (!wakeup_loongson()) - LOONGSON_CHIPCFG(0) &= ~0x7; + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); } /* @@ -98,15 +98,16 @@ static void loongson_suspend_enter(void) stop_perf_counters(); - cached_cpu_freq = LOONGSON_CHIPCFG(0); + cached_cpu_freq = readl(LOONGSON_CHIPCFG); /* Put CPU into wait mode */ - LOONGSON_CHIPCFG(0) &= ~0x7; + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); /* wait for the given events to wakeup cpu from wait mode */ wait_for_wakeup_events(); - LOONGSON_CHIPCFG(0) = cached_cpu_freq; + writel(cached_cpu_freq, LOONGSON_CHIPCFG); + mmiowb(); } diff --git a/arch/mips/loongson64/common/reset.c b/arch/mips/loongson2ef/common/reset.c index ce39e918e4d5..e7c87161ce00 100644 --- a/arch/mips/loongson64/common/reset.c +++ b/arch/mips/loongson2ef/common/reset.c @@ -13,7 +13,6 @@ #include <asm/reboot.h> #include <loongson.h> -#include <boot_param.h> static inline void loongson_reboot(void) { @@ -35,26 +34,15 @@ static inline void loongson_reboot(void) static void loongson_restart(char *command) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE /* do preparation for reboot */ mach_prepare_reboot(); /* reboot via jumping to boot base address */ loongson_reboot(); -#else - void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; - - fw_restart(); - while (1) { - if (cpu_wait) - cpu_wait(); - } -#endif } static void loongson_poweroff(void) { -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE mach_prepare_shutdown(); /* @@ -62,15 +50,6 @@ static void loongson_poweroff(void) * a generic delay loop, machine_hang(), so simply return. */ return; -#else - void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; - - fw_poweroff(); - while (1) { - if (cpu_wait) - cpu_wait(); - } -#endif } static void loongson_halt(void) diff --git a/arch/mips/loongson64/common/rtc.c b/arch/mips/loongson2ef/common/rtc.c index 8d7628c0f513..8d7628c0f513 100644 --- a/arch/mips/loongson64/common/rtc.c +++ b/arch/mips/loongson2ef/common/rtc.c diff --git a/arch/mips/loongson2ef/common/serial.c b/arch/mips/loongson2ef/common/serial.c new file mode 100644 index 000000000000..ac4f6e3ebc3e --- /dev/null +++ b/arch/mips/loongson2ef/common/serial.c @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzhangjin@gmail.com) + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +#define PORT(int, clk) \ +{ \ + .irq = int, \ + .uartclk = clk, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int, clk) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = clk, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[MACH_LOONGSON_END + 1] = { + [MACH_LOONGSON_UNKNOWN] = {}, + [MACH_LEMOTE_FL2E] = PORT(4, 1843200), + [MACH_LEMOTE_FL2F] = PORT(3, 1843200), + [MACH_LEMOTE_ML2F7] = PORT_M(3, 3686400), + [MACH_LEMOTE_YL2F89] = PORT_M(3, 3686400), + [MACH_DEXXON_GDIUM2F10] = PORT_M(3, 3686400), + [MACH_LEMOTE_NAS] = PORT_M(3, 3686400), + [MACH_LEMOTE_LL2F] = PORT(3, 1843200), + [MACH_LOONGSON_END] = {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +static int __init serial_init(void) +{ + unsigned char iotype; + + iotype = uart8250_data[mips_machtype].iotype; + + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype].mapbase = + loongson_uart_base; + uart8250_data[mips_machtype].membase = + (void __iomem *)_loongson_uart_base; + } + else if (UPIO_PORT == iotype) + uart8250_data[mips_machtype].iobase = + loongson_uart_base - LOONGSON_PCIIO_BASE; + + memset(&uart8250_data[mips_machtype + 1], 0, + sizeof(struct plat_serial8250_port)); + uart8250_device.dev.platform_data = &uart8250_data[mips_machtype]; + + return platform_device_register(&uart8250_device); +} +module_init(serial_init); + +static void __exit serial_exit(void) +{ + platform_device_unregister(&uart8250_device); +} +module_exit(serial_exit); diff --git a/arch/mips/loongson64/common/setup.c b/arch/mips/loongson2ef/common/setup.c index bc2da4c140c4..4fd27f4f90ed 100644 --- a/arch/mips/loongson64/common/setup.c +++ b/arch/mips/loongson2ef/common/setup.c @@ -11,11 +11,6 @@ #include <loongson.h> -#ifdef CONFIG_VT -#include <linux/console.h> -#include <linux/screen_info.h> -#endif - static void wbflush_loongson(void) { asm(".set\tpush\n\t" @@ -32,20 +27,4 @@ EXPORT_SYMBOL(__wbflush); void __init plat_mem_setup(void) { -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; - - screen_info = (struct screen_info) { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = VIDEO_TYPE_VGAC, - .orig_video_points = 16, - }; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif } diff --git a/arch/mips/loongson64/common/time.c b/arch/mips/loongson2ef/common/time.c index e78760ce475b..585741af42a9 100644 --- a/arch/mips/loongson64/common/time.c +++ b/arch/mips/loongson2ef/common/time.c @@ -18,11 +18,7 @@ void __init plat_time_init(void) /* setup mips r4k timer */ mips_hpt_frequency = cpu_clock_freq / 2; -#ifdef CONFIG_RS780_HPET - setup_hpet_timer(); -#else setup_mfgpt0_timer(); -#endif } void read_persistent_clock64(struct timespec64 *ts) diff --git a/arch/mips/loongson64/common/uart_base.c b/arch/mips/loongson2ef/common/uart_base.c index e88d937f10fe..bbfe1095a843 100644 --- a/arch/mips/loongson64/common/uart_base.c +++ b/arch/mips/loongson2ef/common/uart_base.c @@ -10,9 +10,9 @@ #include <loongson.h> /* raw */ -unsigned long loongson_uart_base[MAX_UARTS] = {}; +unsigned long loongson_uart_base; /* ioremapped */ -unsigned long _loongson_uart_base[MAX_UARTS] = {}; +unsigned long _loongson_uart_base; EXPORT_SYMBOL(loongson_uart_base); EXPORT_SYMBOL(_loongson_uart_base); @@ -20,16 +20,12 @@ EXPORT_SYMBOL(_loongson_uart_base); void prom_init_loongson_uart_base(void) { switch (mips_machtype) { - case MACH_LOONGSON_GENERIC: - /* The CPU provided serial port (CPU) */ - loongson_uart_base[0] = LOONGSON_REG_BASE + 0x1e0; - break; case MACH_LEMOTE_FL2E: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x3f8; + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; break; case MACH_LEMOTE_FL2F: case MACH_LEMOTE_LL2F: - loongson_uart_base[0] = LOONGSON_PCIIO_BASE + 0x2f8; + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; break; case MACH_LEMOTE_ML2F7: case MACH_LEMOTE_YL2F89: @@ -37,10 +33,9 @@ void prom_init_loongson_uart_base(void) case MACH_LEMOTE_NAS: default: /* The CPU provided serial port (LPC) */ - loongson_uart_base[0] = LOONGSON_LIO1_BASE + 0x3f8; + loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; break; } - _loongson_uart_base[0] = - (unsigned long)ioremap_nocache(loongson_uart_base[0], 8); + _loongson_uart_base = TO_UNCAC(loongson_uart_base); } diff --git a/arch/mips/loongson64/fuloong-2e/Makefile b/arch/mips/loongson2ef/fuloong-2e/Makefile index bb58edb3bea7..bb58edb3bea7 100644 --- a/arch/mips/loongson64/fuloong-2e/Makefile +++ b/arch/mips/loongson2ef/fuloong-2e/Makefile diff --git a/arch/mips/loongson64/fuloong-2e/dma.c b/arch/mips/loongson2ef/fuloong-2e/dma.c index e122292bf666..e122292bf666 100644 --- a/arch/mips/loongson64/fuloong-2e/dma.c +++ b/arch/mips/loongson2ef/fuloong-2e/dma.c diff --git a/arch/mips/loongson64/fuloong-2e/irq.c b/arch/mips/loongson2ef/fuloong-2e/irq.c index 32278e7bf85c..32278e7bf85c 100644 --- a/arch/mips/loongson64/fuloong-2e/irq.c +++ b/arch/mips/loongson2ef/fuloong-2e/irq.c diff --git a/arch/mips/loongson64/fuloong-2e/reset.c b/arch/mips/loongson2ef/fuloong-2e/reset.c index 8273de1cf4bb..8273de1cf4bb 100644 --- a/arch/mips/loongson64/fuloong-2e/reset.c +++ b/arch/mips/loongson2ef/fuloong-2e/reset.c diff --git a/arch/mips/loongson64/lemote-2f/Makefile b/arch/mips/loongson2ef/lemote-2f/Makefile index 881a0ec06d1f..881a0ec06d1f 100644 --- a/arch/mips/loongson64/lemote-2f/Makefile +++ b/arch/mips/loongson2ef/lemote-2f/Makefile diff --git a/arch/mips/loongson64/lemote-2f/clock.c b/arch/mips/loongson2ef/lemote-2f/clock.c index 8281334df9c8..414f282c8ab5 100644 --- a/arch/mips/loongson64/lemote-2f/clock.c +++ b/arch/mips/loongson2ef/lemote-2f/clock.c @@ -15,7 +15,7 @@ #include <linux/spinlock.h> #include <asm/clock.h> -#include <asm/mach-loongson64/loongson.h> +#include <asm/mach-loongson2ef/loongson.h> static LIST_HEAD(clock_list); static DEFINE_SPINLOCK(clock_lock); @@ -118,9 +118,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) clk->rate = rate; - regval = LOONGSON_CHIPCFG(0); + regval = readl(LOONGSON_CHIPCFG); regval = (regval & ~0x7) | (pos->driver_data - 1); - LOONGSON_CHIPCFG(0) = regval; + writel(regval, LOONGSON_CHIPCFG); return ret; } diff --git a/arch/mips/loongson64/lemote-2f/dma.c b/arch/mips/loongson2ef/lemote-2f/dma.c index abf0e39d7e46..abf0e39d7e46 100644 --- a/arch/mips/loongson64/lemote-2f/dma.c +++ b/arch/mips/loongson2ef/lemote-2f/dma.c diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.c index d138220e96a2..d138220e96a2 100644 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.c +++ b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.c diff --git a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.h index aecdbc9c875a..aecdbc9c875a 100644 --- a/arch/mips/loongson64/lemote-2f/ec_kb3310b.h +++ b/arch/mips/loongson2ef/lemote-2f/ec_kb3310b.h diff --git a/arch/mips/loongson64/lemote-2f/irq.c b/arch/mips/loongson2ef/lemote-2f/irq.c index c58a044c6c07..c58a044c6c07 100644 --- a/arch/mips/loongson64/lemote-2f/irq.c +++ b/arch/mips/loongson2ef/lemote-2f/irq.c diff --git a/arch/mips/loongson64/lemote-2f/machtype.c b/arch/mips/loongson2ef/lemote-2f/machtype.c index 9462a3ab57be..9462a3ab57be 100644 --- a/arch/mips/loongson64/lemote-2f/machtype.c +++ b/arch/mips/loongson2ef/lemote-2f/machtype.c diff --git a/arch/mips/loongson64/lemote-2f/pm.c b/arch/mips/loongson2ef/lemote-2f/pm.c index 3d0027229e3c..3d0027229e3c 100644 --- a/arch/mips/loongson64/lemote-2f/pm.c +++ b/arch/mips/loongson2ef/lemote-2f/pm.c diff --git a/arch/mips/loongson64/lemote-2f/reset.c b/arch/mips/loongson2ef/lemote-2f/reset.c index 0db0934302ea..197dae4ffd23 100644 --- a/arch/mips/loongson64/lemote-2f/reset.c +++ b/arch/mips/loongson2ef/lemote-2f/reset.c @@ -24,7 +24,7 @@ static void reset_cpu(void) * reset cpu to full speed, this is needed when enabling cpu frequency * scalling */ - LOONGSON_CHIPCFG(0) |= 0x7; + writel(readl(LOONGSON_CHIPCFG) | 0x7, LOONGSON_CHIPCFG); } /* reset support for fuloong2f */ diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index 4c14a11525f4..b1aefd06e3f5 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -1,119 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 if MACH_LOONGSON64 -choice - prompt "Machine Type" - -config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HAVE_PCI - select I8259 - select ISA - select IRQ_MIPS_CPU - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - select LOONGSON_MC146818 - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. - -config LEMOTE_MACH2F - bool "Lemote Loongson 2F family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select BOARD_SCACHE - select BOOT_ELF32 - select CEVT_R4K if ! MIPS_EXTERNAL_TIMER - select CPU_HAS_WB - select CS5536 - select CSRC_R4K if ! MIPS_EXTERNAL_TIMER - select DMA_NONCOHERENT - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK - select HAVE_PCI - select I8259 - select IRQ_MIPS_CPU - select ISA - select SYS_HAS_CPU_LOONGSON2F - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - help - Lemote Loongson 2F family machines utilize the 2F revision of - Loongson processor and the AMD CS5536 south bridge. - - These family machines include fuloong2f mini PC, yeeloong2f notebook, - LingLoong allinone PC and so forth. - -config LOONGSON_MACH3X - bool "Generic Loongson 3 family machines" - select ARCH_SPARSEMEM_ENABLE - select ARCH_MIGHT_HAVE_PC_PARPORT - select ARCH_MIGHT_HAVE_PC_SERIO - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select BOOT_ELF32 - select BOARD_SCACHE - select CSRC_R4K - select CEVT_R4K - select CPU_HAS_WB - select FORCE_PCI - select ISA - select I8259 - select IRQ_MIPS_CPU - select NR_CPUS_DEFAULT_4 - select SYS_HAS_CPU_LOONGSON3 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_HOTPLUG_CPU - select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE - help - Generic Loongson 3 family machines utilize the 3A/3B revision - of Loongson processor and RS780/SBX00 chipset. -endchoice - -config CS5536 - bool - -config CS5536_MFGPT - bool "CS5536 MFGPT Timer" - depends on CS5536 && !HIGH_RES_TIMERS - select MIPS_EXTERNAL_TIMER - help - This option enables the mfgpt0 timer of AMD CS5536. With this timer - switched on you can not use high resolution timers. - - If you want to enable the Loongson2 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - config RS780_HPET bool "RS780/SBX00 HPET Timer" - depends on LOONGSON_MACH3X + depends on CONFIG_MACH_LOONGSON64 select MIPS_EXTERNAL_TIMER help This option enables the hpet timer of AMD RS780/SBX00. @@ -123,16 +13,9 @@ config RS780_HPET If unsure, say Yes. -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 config LOONGSON_MC146818 bool default n -config LEFI_FIRMWARE_INTERFACE - bool - endif # MACH_LOONGSON64 diff --git a/arch/mips/loongson64/Makefile b/arch/mips/loongson64/Makefile index 1a5df773707d..0b3c65b52965 100644 --- a/arch/mips/loongson64/Makefile +++ b/arch/mips/loongson64/Makefile @@ -1,24 +1,13 @@ # SPDX-License-Identifier: GPL-2.0-only # -# Common code for all Loongson based systems +# Makefile for Loongson-3 family machines # +obj-$(CONFIG_MACH_LOONGSON64) += irq.o cop2-ex.o platform.o acpi_init.o dma.o \ + setup.o init.o cmdline.o env.o time.o reset.o \ -obj-$(CONFIG_MACH_LOONGSON64) += common/ - -# -# Lemote Fuloong mini-PC (Loongson 2E-based) -# - -obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ - -# -# Lemote loongson2f family machines -# - -obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/ - -# -# All Loongson-3 family machines -# - -obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/ +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_NUMA) += numa.o +obj-$(CONFIG_RS780_HPET) += hpet.o +obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_LOONGSON_MC146818) += rtc.o +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson64/Platform b/arch/mips/loongson64/Platform index 9f79908f5063..d5eb94c9edb4 100644 --- a/arch/mips/loongson64/Platform +++ b/arch/mips/loongson64/Platform @@ -2,32 +2,13 @@ # Loongson Processors' Support # -# Only gcc >= 4.4 have Loongson specific support -cflags-$(CONFIG_CPU_LOONGSON2) += -Wa,--trap -cflags-$(CONFIG_CPU_LOONGSON2E) += \ - $(call cc-option,-march=loongson2e,-march=r4600) -cflags-$(CONFIG_CPU_LOONGSON2F) += \ - $(call cc-option,-march=loongson2f,-march=r4600) -# Enable the workarounds for Loongson2f -ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop) - else - cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop - endif - ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),) - $(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump) - else - cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump - endif -endif -cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON64) += -Wa,--trap # # Some versions of binutils, not currently mainline as of 2019/02/04, support # an -mfix-loongson3-llsc flag which emits a sync prior to each ll instruction -# to work around a CPU bug (see loongson_llsc_mb() in asm/barrier.h for a +# to work around a CPU bug (see __SYNC_loongson3_war in asm/sync.h for a # description). # # We disable this in order to prevent the assembler meddling with the @@ -44,7 +25,7 @@ cflags-$(CONFIG_CPU_LOONGSON3) += -Wa,--trap # binutils does not merge support for the flag then we can revisit & remove # this later - for now it ensures vendor toolchains don't cause problems. # -cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) +cflags-$(CONFIG_CPU_LOONGSON64) += $(call as-option,-Wa$(comma)-mno-fix-loongson3-llsc,) # # binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a @@ -55,14 +36,14 @@ cflags-$(CONFIG_CPU_LOONGSON3) += $(call as-option,-Wa$(comma)-mno-fix-loongson3 # ifeq ($(call cc-ifversion, -ge, 0409, y), y) ifeq ($(call ld-ifversion, -ge, 225000000, y), y) - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=loongson3a -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) else - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif else - cflags-$(CONFIG_CPU_LOONGSON3) += \ + cflags-$(CONFIG_CPU_LOONGSON64) += \ $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) endif @@ -76,6 +57,4 @@ cflags-y += $(call cc-option,-mno-loongson-mmi) platform-$(CONFIG_MACH_LOONGSON64) += loongson64/ cflags-$(CONFIG_MACH_LOONGSON64) += -I$(srctree)/arch/mips/include/asm/mach-loongson64 -mno-branch-likely -load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 -load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 -load-$(CONFIG_LOONGSON_MACH3X) += 0xffffffff80200000 +load-$(CONFIG_CPU_LOONGSON64) += 0xffffffff80200000 diff --git a/arch/mips/loongson64/loongson-3/acpi_init.c b/arch/mips/loongson64/acpi_init.c index 8d7c119ddf91..8d7c119ddf91 100644 --- a/arch/mips/loongson64/loongson-3/acpi_init.c +++ b/arch/mips/loongson64/acpi_init.c diff --git a/arch/mips/loongson64/cmdline.c b/arch/mips/loongson64/cmdline.c new file mode 100644 index 000000000000..fb1644b01471 --- /dev/null +++ b/arch/mips/loongson64/cmdline.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <asm/bootinfo.h> + +#include <loongson.h> + +void __init prom_init_cmdline(void) +{ + int prom_argc; + /* pmon passes arguments in 32bit pointers */ + int *_prom_argv; + int i; + long l; + + /* firmware arguments are initialized in head.S */ + prom_argc = fw_arg0; + _prom_argv = (int *)fw_arg1; + + /* arg[0] is "g", the rest is boot parameters */ + arcs_cmdline[0] = '\0'; + for (i = 1; i < prom_argc; i++) { + l = (long)_prom_argv[i]; + if (strlen(arcs_cmdline) + strlen(((char *)l) + 1) + >= sizeof(arcs_cmdline)) + break; + strcat(arcs_cmdline, ((char *)l)); + strcat(arcs_cmdline, " "); + } +} diff --git a/arch/mips/loongson64/common/serial.c b/arch/mips/loongson64/common/serial.c deleted file mode 100644 index 98c3a7feb10f..000000000000 --- a/arch/mips/loongson64/common/serial.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Copyright (C) 2009 Lemote, Inc. - * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzhangjin@gmail.com) - */ - -#include <linux/io.h> -#include <linux/module.h> -#include <linux/serial_8250.h> - -#include <asm/bootinfo.h> - -#include <loongson.h> -#include <machine.h> - -#define PORT(int, clk) \ -{ \ - .irq = int, \ - .uartclk = clk, \ - .iotype = UPIO_PORT, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -#define PORT_M(int, clk) \ -{ \ - .irq = MIPS_CPU_IRQ_BASE + (int), \ - .uartclk = clk, \ - .iotype = UPIO_MEM, \ - .membase = (void __iomem *)NULL, \ - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ - .regshift = 0, \ -} - -static struct plat_serial8250_port uart8250_data[][MAX_UARTS + 1] = { - [MACH_LOONGSON_UNKNOWN] = {}, - [MACH_LEMOTE_FL2E] = {PORT(4, 1843200), {} }, - [MACH_LEMOTE_FL2F] = {PORT(3, 1843200), {} }, - [MACH_LEMOTE_ML2F7] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_YL2F89] = {PORT_M(3, 3686400), {} }, - [MACH_DEXXON_GDIUM2F10] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_NAS] = {PORT_M(3, 3686400), {} }, - [MACH_LEMOTE_LL2F] = {PORT(3, 1843200), {} }, - [MACH_LOONGSON_GENERIC] = {PORT_M(2, 25000000), {} }, - [MACH_LOONGSON_END] = {}, -}; - -static struct platform_device uart8250_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, -}; - -static int __init serial_init(void) -{ - int i; - unsigned char iotype; - - iotype = uart8250_data[mips_machtype][0].iotype; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][0].mapbase = - loongson_uart_base[0]; - uart8250_data[mips_machtype][0].membase = - (void __iomem *)_loongson_uart_base[0]; - } - else if (UPIO_PORT == iotype) - uart8250_data[mips_machtype][0].iobase = - loongson_uart_base[0] - LOONGSON_PCIIO_BASE; - - if (loongson_sysconf.uarts[0].uartclk) - uart8250_data[mips_machtype][0].uartclk = - loongson_sysconf.uarts[0].uartclk; - - for (i = 1; i < loongson_sysconf.nr_uarts; i++) { - iotype = loongson_sysconf.uarts[i].iotype; - uart8250_data[mips_machtype][i].iotype = iotype; - loongson_uart_base[i] = loongson_sysconf.uarts[i].uart_base; - - if (UPIO_MEM == iotype) { - uart8250_data[mips_machtype][i].irq = - MIPS_CPU_IRQ_BASE + loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].mapbase = - loongson_uart_base[i]; - uart8250_data[mips_machtype][i].membase = - ioremap_nocache(loongson_uart_base[i], 8); - } else if (UPIO_PORT == iotype) { - uart8250_data[mips_machtype][i].irq = - loongson_sysconf.uarts[i].int_offset; - uart8250_data[mips_machtype][i].iobase = - loongson_uart_base[i] - LOONGSON_PCIIO_BASE; - } - - uart8250_data[mips_machtype][i].uartclk = - loongson_sysconf.uarts[i].uartclk; - uart8250_data[mips_machtype][i].flags = - UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - } - - memset(&uart8250_data[mips_machtype][loongson_sysconf.nr_uarts], - 0, sizeof(struct plat_serial8250_port)); - uart8250_device.dev.platform_data = uart8250_data[mips_machtype]; - - return platform_device_register(&uart8250_device); -} -module_init(serial_init); - -static void __exit serial_exit(void) -{ - platform_device_unregister(&uart8250_device); -} -module_exit(serial_exit); diff --git a/arch/mips/loongson64/loongson-3/cop2-ex.c b/arch/mips/loongson64/cop2-ex.c index 9efdfe430ff0..9efdfe430ff0 100644 --- a/arch/mips/loongson64/loongson-3/cop2-ex.c +++ b/arch/mips/loongson64/cop2-ex.c diff --git a/arch/mips/loongson64/loongson-3/dma.c b/arch/mips/loongson64/dma.c index 5e86635f71db..5e86635f71db 100644 --- a/arch/mips/loongson64/loongson-3/dma.c +++ b/arch/mips/loongson64/dma.c diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/env.c index 09d5cf4676ca..0daeb7bcf023 100644 --- a/arch/mips/loongson64/common/env.c +++ b/arch/mips/loongson64/env.c @@ -30,41 +30,13 @@ u64 loongson_freqctrl[MAX_PACKAGES]; unsigned long long smp_group[4]; -#define parse_even_earlier(res, option, p) \ -do { \ - unsigned int tmp __maybe_unused; \ - \ - if (strncmp(option, (char *)p, strlen(option)) == 0) \ - tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \ -} while (0) +const char *get_system_type(void) +{ + return "Generic Loongson64 System"; +} void __init prom_init_env(void) { - /* pmon passes arguments in 32bit pointers */ - unsigned int processor_id; - -#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE - int *_prom_envp; - long l; - - /* firmware arguments are initialized in head.S */ - _prom_envp = (int *)fw_arg2; - - l = (long)*_prom_envp; - while (l != 0) { - parse_even_earlier(cpu_clock_freq, "cpuclock", l); - parse_even_earlier(memsize, "memsize", l); - parse_even_earlier(highmemsize, "highmemsize", l); - _prom_envp++; - l = (long)*_prom_envp; - } - if (memsize == 0) - memsize = 256; - - loongson_sysconf.nr_uarts = 1; - - pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); -#else struct boot_params *boot_p; struct loongson_params *loongson_p; struct system_loongson *esys; @@ -182,31 +154,5 @@ void __init prom_init_env(void) if (loongson_sysconf.nr_sensors) memcpy(loongson_sysconf.sensors, esys->sensors, sizeof(struct sensor_device) * loongson_sysconf.nr_sensors); -#endif - if (cpu_clock_freq == 0) { - processor_id = (¤t_cpu_data)->processor_id; - switch (processor_id & PRID_REV_MASK) { - case PRID_REV_LOONGSON2E: - cpu_clock_freq = 533080000; - break; - case PRID_REV_LOONGSON2F: - cpu_clock_freq = 797000000; - break; - case PRID_REV_LOONGSON3A_R1: - case PRID_REV_LOONGSON3A_R2_0: - case PRID_REV_LOONGSON3A_R2_1: - case PRID_REV_LOONGSON3A_R3_0: - case PRID_REV_LOONGSON3A_R3_1: - cpu_clock_freq = 900000000; - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - cpu_clock_freq = 1000000000; - break; - default: - cpu_clock_freq = 100000000; - break; - } - } pr_info("CpuClock = %u\n", cpu_clock_freq); } diff --git a/arch/mips/loongson64/loongson-3/hpet.c b/arch/mips/loongson64/hpet.c index ed15430ad64f..ed15430ad64f 100644 --- a/arch/mips/loongson64/loongson-3/hpet.c +++ b/arch/mips/loongson64/hpet.c diff --git a/arch/mips/loongson64/init.c b/arch/mips/loongson64/init.c new file mode 100644 index 000000000000..48b44f415059 --- /dev/null +++ b/arch/mips/loongson64/init.c @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <linux/memblock.h> +#include <asm/bootinfo.h> +#include <asm/traps.h> +#include <asm/smp-ops.h> +#include <asm/cacheflush.h> + +#include <loongson.h> + +static void __init mips_nmi_setup(void) +{ + void *base; + extern char except_vec_nmi; + + base = (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +void __init prom_init(void) +{ + prom_init_cmdline(); + prom_init_env(); + + /* init base address of io space */ + set_io_port_base((unsigned long) + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + + prom_init_numa_memory(); + + /* Hardcode to CPU UART 0 */ + setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024); + + register_smp_ops(&loongson3_smp_ops); + board_nmi_handler_setup = mips_nmi_setup; +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/loongson64/loongson-3/irq.c b/arch/mips/loongson64/irq.c index 5605061f5f98..79ad797497e4 100644 --- a/arch/mips/loongson64/loongson-3/irq.c +++ b/arch/mips/loongson64/irq.c @@ -78,8 +78,12 @@ static void ht_irqdispatch(void) #define UNUSED_IPS (CAUSEF_IP5 | CAUSEF_IP4 | CAUSEF_IP1 | CAUSEF_IP0) -void mach_irq_dispatch(unsigned int pending) +asmlinkage void plat_irq_dispatch(void) { + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + if (pending & CAUSEF_IP7) do_IRQ(LOONGSON_TIMER_IRQ); #if defined(CONFIG_SMP) @@ -127,7 +131,7 @@ void irq_router_init(void) LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10; } -void __init mach_init_irq(void) +void __init arch_init_irq(void) { struct irq_chip *chip; diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile deleted file mode 100644 index df39598742b2..000000000000 --- a/arch/mips/loongson64/loongson-3/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for Loongson-3 family machines -# -obj-y += irq.o cop2-ex.o platform.o acpi_init.o dma.o - -obj-$(CONFIG_SMP) += smp.o - -obj-$(CONFIG_NUMA) += numa.o - -obj-$(CONFIG_RS780_HPET) += hpet.o diff --git a/arch/mips/loongson64/loongson-3/numa.c b/arch/mips/loongson64/numa.c index 8f20d2cb3767..ef94a2278561 100644 --- a/arch/mips/loongson64/loongson-3/numa.c +++ b/arch/mips/loongson64/numa.c @@ -26,12 +26,15 @@ #include <asm/wbflush.h> #include <boot_param.h> -static struct node_data prealloc__node_data[MAX_NUMNODES]; +static struct pglist_data prealloc__node_data[MAX_NUMNODES]; unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); -struct node_data *__node_data[MAX_NUMNODES]; +struct pglist_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); +cpumask_t __node_cpumask[MAX_NUMNODES]; +EXPORT_SYMBOL(__node_cpumask); + static void enable_lpa(void) { unsigned long value; @@ -214,7 +217,7 @@ static __init void prom_meminit(void) if (node_online(node)) { szmem(node); node_mem_init(node); - cpumask_clear(&__node_data[(node)]->cpumask); + cpumask_clear(&__node_cpumask[node]); } } memblocks_present(); @@ -228,7 +231,7 @@ static __init void prom_meminit(void) if (loongson_sysconf.reserved_cpus_mask & (1<<cpu)) continue; - cpumask_set_cpu(active_cpu, &__node_data[(node)]->cpumask); + cpumask_set_cpu(active_cpu, &__node_cpumask[node]); pr_info("NUMA: set cpumask cpu %d on node %d\n", active_cpu, node); active_cpu++; diff --git a/arch/mips/loongson64/common/pci.c b/arch/mips/loongson64/pci.c index c47bb7bf3aa4..7bbe2388f38e 100644 --- a/arch/mips/loongson64/common/pci.c +++ b/arch/mips/loongson64/pci.c @@ -81,15 +81,12 @@ static int __init pcibios_init(void) setup_pcimap(); loongson_pci_controller.io_map_base = mips_io_port_base; -#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr; loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr; -#endif + register_pci_controller(&loongson_pci_controller); -#ifdef CONFIG_CPU_LOONGSON3 sbx00_acpi_init(); -#endif return 0; } diff --git a/arch/mips/loongson64/loongson-3/platform.c b/arch/mips/loongson64/platform.c index 13f3404f0030..13f3404f0030 100644 --- a/arch/mips/loongson64/loongson-3/platform.c +++ b/arch/mips/loongson64/platform.c diff --git a/arch/mips/loongson64/pm.c b/arch/mips/loongson64/pm.c new file mode 100644 index 000000000000..7c8556f09781 --- /dev/null +++ b/arch/mips/loongson64/pm.c @@ -0,0 +1,104 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + */ +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static const struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c new file mode 100644 index 000000000000..88b3bd5fed25 --- /dev/null +++ b/arch/mips/loongson64/reset.c @@ -0,0 +1,64 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * Copyright (C) 2009 Lemote, Inc. + * Author: Zhangjin Wu, wuzhangjin@gmail.com + */ +#include <linux/init.h> +#include <linux/pm.h> + +#include <asm/idle.h> +#include <asm/reboot.h> + +#include <loongson.h> +#include <boot_param.h> + +static inline void loongson_reboot(void) +{ + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +} + +static void loongson_restart(char *command) +{ + + void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; + + fw_restart(); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static void loongson_poweroff(void) +{ + void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; + + fw_poweroff(); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static void loongson_halt(void) +{ + pr_notice("\n\n** You can safely turn off the power now **\n\n"); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = loongson_restart; + _machine_halt = loongson_halt; + pm_power_off = loongson_poweroff; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/loongson64/rtc.c b/arch/mips/loongson64/rtc.c new file mode 100644 index 000000000000..8d7628c0f513 --- /dev/null +++ b/arch/mips/loongson64/rtc.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Lemote Fuloong platform support + * + * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mc146818rtc.h> + +static struct resource loongson_rtc_resources[] = { + { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device loongson_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = loongson_rtc_resources, + .num_resources = ARRAY_SIZE(loongson_rtc_resources), +}; + + +static int __init loongson_rtc_platform_init(void) +{ + platform_device_register(&loongson_rtc_device); + return 0; +} + +device_initcall(loongson_rtc_platform_init); diff --git a/arch/mips/loongson64/setup.c b/arch/mips/loongson64/setup.c new file mode 100644 index 000000000000..4fd27f4f90ed --- /dev/null +++ b/arch/mips/loongson64/setup.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/export.h> +#include <linux/init.h> + +#include <asm/wbflush.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +static void wbflush_loongson(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void (*__wbflush)(void) = wbflush_loongson; +EXPORT_SYMBOL(__wbflush); + +void __init plat_mem_setup(void) +{ +} diff --git a/arch/mips/loongson64/loongson-3/smp.c b/arch/mips/loongson64/smp.c index ce68cdaaf33c..de8e0741ce2d 100644 --- a/arch/mips/loongson64/loongson-3/smp.c +++ b/arch/mips/loongson64/smp.c @@ -18,6 +18,7 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> #include <loongson.h> +#include <loongson_regs.h> #include <workarounds.h> #include "smp.h" @@ -48,6 +49,62 @@ static uint32_t core0_c0count[NR_CPUS]; __wbflush(); \ } while (0) +u32 (*ipi_read_clear)(int cpu); +void (*ipi_write_action)(int cpu, u32 action); + +static u32 csr_ipi_read_clear(int cpu) +{ + u32 action; + + /* Load the ipi register to figure out what we're supposed to do */ + action = csr_readl(LOONGSON_CSR_IPI_STATUS); + /* Clear the ipi register to clear the interrupt */ + csr_writel(action, LOONGSON_CSR_IPI_CLEAR); + + return action; +} + +static void csr_ipi_write_action(int cpu, u32 action) +{ + unsigned int irq = 0; + + while ((irq = ffs(action))) { + uint32_t val = CSR_IPI_SEND_BLOCK; + val |= (irq - 1); + val |= (cpu << CSR_IPI_SEND_CPU_SHIFT); + csr_writel(val, LOONGSON_CSR_IPI_SEND); + action &= ~BIT(irq - 1); + } +} + +static u32 legacy_ipi_read_clear(int cpu) +{ + u32 action; + + /* Load the ipi register to figure out what we're supposed to do */ + action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + /* Clear the ipi register to clear the interrupt */ + loongson3_ipi_write32(action, ipi_clear0_regs[cpu_logical_map(cpu)]); + + return action; +} + +static void legacy_ipi_write_action(int cpu, u32 action) +{ + loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]); +} + +static void csr_ipi_probe(void) +{ + if (cpu_has_csr() && csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_IPI) { + ipi_read_clear = csr_ipi_read_clear; + ipi_write_action = csr_ipi_write_action; + } else { + ipi_read_clear = legacy_ipi_read_clear; + ipi_write_action = legacy_ipi_write_action; + } +} + static void ipi_set0_regs_init(void) { ipi_set0_regs[0] = (void *) @@ -233,7 +290,7 @@ static void ipi_mailbox_buf_init(void) */ static void loongson3_send_ipi_single(int cpu, unsigned int action) { - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(cpu)]); + ipi_write_action(cpu_logical_map(cpu), (u32)action); } static void @@ -242,14 +299,14 @@ loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action) unsigned int i; for_each_cpu(i, mask) - loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu_logical_map(i)]); + ipi_write_action(cpu_logical_map(i), (u32)action); } #define IPI_IRQ_OFFSET 6 void loongson3_send_irq_by_ipi(int cpu, int irqs) { - loongson3_ipi_write32(irqs << IPI_IRQ_OFFSET, ipi_set0_regs[cpu_logical_map(cpu)]); + ipi_write_action(cpu_logical_map(cpu), irqs << IPI_IRQ_OFFSET); } void loongson3_ipi_interrupt(struct pt_regs *regs) @@ -257,13 +314,9 @@ void loongson3_ipi_interrupt(struct pt_regs *regs) int i, cpu = smp_processor_id(); unsigned int action, c0count, irqs; - /* Load the ipi register to figure out what we're supposed to do */ - action = loongson3_ipi_read32(ipi_status0_regs[cpu_logical_map(cpu)]); + action = ipi_read_clear(cpu); irqs = action >> IPI_IRQ_OFFSET; - /* Clear the ipi register to clear the interrupt */ - loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu_logical_map(cpu)]); - if (action & SMP_RESCHEDULE_YOURSELF) scheduler_ipi(); @@ -372,6 +425,7 @@ static void __init loongson3_smp_setup(void) num++; } + csr_ipi_probe(); ipi_set0_regs_init(); ipi_clear0_regs_init(); ipi_status0_regs_init(); @@ -450,7 +504,7 @@ static void loongson3_cpu_die(unsigned int cpu) * flush all L1 entries at first. Then, another core (usually Core 0) can * safely disable the clock of the target core. loongson3_play_dead() is * called via CKSEG1 (uncached and unmmaped) */ -static void loongson3a_r1_play_dead(int *state_addr) +static void loongson3_type1_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -512,7 +566,7 @@ static void loongson3a_r1_play_dead(int *state_addr) : "a1"); } -static void loongson3a_r2r3_play_dead(int *state_addr) +static void loongson3_type2_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -532,27 +586,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " cache 1, 3(%[addr]) \n" " addiu %[sets], %[sets], -1 \n" " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x40 \n" - " li %[addr], 0x80000000 \n" /* KSEG0 */ - "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ - " cache 2, 1(%[addr]) \n" - " cache 2, 2(%[addr]) \n" - " cache 2, 3(%[addr]) \n" - " cache 2, 4(%[addr]) \n" - " cache 2, 5(%[addr]) \n" - " cache 2, 6(%[addr]) \n" - " cache 2, 7(%[addr]) \n" - " cache 2, 8(%[addr]) \n" - " cache 2, 9(%[addr]) \n" - " cache 2, 10(%[addr]) \n" - " cache 2, 11(%[addr]) \n" - " cache 2, 12(%[addr]) \n" - " cache 2, 13(%[addr]) \n" - " cache 2, 14(%[addr]) \n" - " cache 2, 15(%[addr]) \n" - " addiu %[vsets], %[vsets], -1 \n" - " bnez %[vsets], 2b \n" - " addiu %[addr], %[addr], 0x40 \n" + " addiu %[addr], %[addr], 0x20 \n" " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ " sw %[val], (%[state_addr]) \n" " sync \n" @@ -560,8 +594,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " .set pop \n" : [addr] "=&r" (addr), [val] "=&r" (val) : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), - [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); __asm__ __volatile__( " .set push \n" @@ -576,6 +609,8 @@ static void loongson3a_r2r3_play_dead(int *state_addr) " andi %[node], %[cpuid], 0xc \n" " dsll %[node], 42 \n" /* get node id */ " or %[base], %[base], %[node] \n" + " dsrl %[node], 30 \n" /* 15:14 */ + " or %[base], %[base], %[node] \n" "1: li %[count], 0x100 \n" /* wait for init loop */ "2: bnez %[count], 2b \n" /* limit mailbox access */ " addiu %[count], -1 \n" @@ -595,7 +630,7 @@ static void loongson3a_r2r3_play_dead(int *state_addr) : "a1"); } -static void loongson3b_play_dead(int *state_addr) +static void loongson3_type3_play_dead(int *state_addr) { register int val; register long cpuid, core, node, count; @@ -615,7 +650,27 @@ static void loongson3b_play_dead(int *state_addr) " cache 1, 3(%[addr]) \n" " addiu %[sets], %[sets], -1 \n" " bnez %[sets], 1b \n" - " addiu %[addr], %[addr], 0x20 \n" + " addiu %[addr], %[addr], 0x40 \n" + " li %[addr], 0x80000000 \n" /* KSEG0 */ + "2: cache 2, 0(%[addr]) \n" /* flush L1 VCache */ + " cache 2, 1(%[addr]) \n" + " cache 2, 2(%[addr]) \n" + " cache 2, 3(%[addr]) \n" + " cache 2, 4(%[addr]) \n" + " cache 2, 5(%[addr]) \n" + " cache 2, 6(%[addr]) \n" + " cache 2, 7(%[addr]) \n" + " cache 2, 8(%[addr]) \n" + " cache 2, 9(%[addr]) \n" + " cache 2, 10(%[addr]) \n" + " cache 2, 11(%[addr]) \n" + " cache 2, 12(%[addr]) \n" + " cache 2, 13(%[addr]) \n" + " cache 2, 14(%[addr]) \n" + " cache 2, 15(%[addr]) \n" + " addiu %[vsets], %[vsets], -1 \n" + " bnez %[vsets], 2b \n" + " addiu %[addr], %[addr], 0x40 \n" " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */ " sw %[val], (%[state_addr]) \n" " sync \n" @@ -623,7 +678,8 @@ static void loongson3b_play_dead(int *state_addr) " .set pop \n" : [addr] "=&r" (addr), [val] "=&r" (val) : [state_addr] "r" (state_addr), - [sets] "r" (cpu_data[smp_processor_id()].dcache.sets)); + [sets] "r" (cpu_data[smp_processor_id()].dcache.sets), + [vsets] "r" (cpu_data[smp_processor_id()].vcache.sets)); __asm__ __volatile__( " .set push \n" @@ -638,8 +694,6 @@ static void loongson3b_play_dead(int *state_addr) " andi %[node], %[cpuid], 0xc \n" " dsll %[node], 42 \n" /* get node id */ " or %[base], %[base], %[node] \n" - " dsrl %[node], 30 \n" /* 15:14 */ - " or %[base], %[base], %[node] \n" "1: li %[count], 0x100 \n" /* wait for init loop */ "2: bnez %[count], 2b \n" /* limit mailbox access */ " addiu %[count], -1 \n" @@ -661,30 +715,42 @@ static void loongson3b_play_dead(int *state_addr) void play_dead(void) { - int *state_addr; + int prid_imp, prid_rev, *state_addr; unsigned int cpu = smp_processor_id(); void (*play_dead_at_ckseg1)(int *); idle_task_exit(); - switch (read_c0_prid() & PRID_REV_MASK) { + + prid_imp = read_c0_prid() & PRID_IMP_MASK; + prid_rev = read_c0_prid() & PRID_REV_MASK; + + if (prid_imp == PRID_IMP_LOONGSON_64G) { + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead); + goto out; + } + + switch (prid_rev) { case PRID_REV_LOONGSON3A_R1: default: play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_r1_play_dead); + (void *)CKSEG1ADDR((unsigned long)loongson3_type1_play_dead); + break; + case PRID_REV_LOONGSON3B_R1: + case PRID_REV_LOONGSON3B_R2: + play_dead_at_ckseg1 = + (void *)CKSEG1ADDR((unsigned long)loongson3_type2_play_dead); break; case PRID_REV_LOONGSON3A_R2_0: case PRID_REV_LOONGSON3A_R2_1: case PRID_REV_LOONGSON3A_R3_0: case PRID_REV_LOONGSON3A_R3_1: play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3a_r2r3_play_dead); - break; - case PRID_REV_LOONGSON3B_R1: - case PRID_REV_LOONGSON3B_R2: - play_dead_at_ckseg1 = - (void *)CKSEG1ADDR((unsigned long)loongson3b_play_dead); + (void *)CKSEG1ADDR((unsigned long)loongson3_type3_play_dead); break; } + +out: state_addr = &per_cpu(cpu_state, cpu); mb(); play_dead_at_ckseg1(state_addr); diff --git a/arch/mips/loongson64/loongson-3/smp.h b/arch/mips/loongson64/smp.h index 957bde81e0e4..957bde81e0e4 100644 --- a/arch/mips/loongson64/loongson-3/smp.h +++ b/arch/mips/loongson64/smp.h diff --git a/arch/mips/loongson64/time.c b/arch/mips/loongson64/time.c new file mode 100644 index 000000000000..1245f22cec84 --- /dev/null +++ b/arch/mips/loongson64/time.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/hpet.h> + +#include <loongson.h> + +void __init plat_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock_freq / 2; + +#ifdef CONFIG_RS780_HPET + setup_hpet_timer(); +#endif +} + +void read_persistent_clock64(struct timespec64 *ts) +{ + ts->tv_sec = mc146818_get_cmos_time(); + ts->tv_nsec = 0; +} diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 89b9c851d822..9d82cb9ced55 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -271,12 +271,14 @@ static inline void tx49_blast_icache32(void) /* I'm in even chunk. blast odd chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start + 0x400; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); CACHE32_UNROLL32_ALIGN; /* I'm in odd chunk. blast even chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); } static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page) @@ -302,12 +304,14 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page) /* I'm in even chunk. blast odd chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start + 0x400; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); CACHE32_UNROLL32_ALIGN; /* I'm in odd chunk. blast even chunks */ for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x400 * 2) - cache32_unroll32(addr|ws, Index_Invalidate_I); + cache_unroll(32, kernel_cache, Index_Invalidate_I, + addr | ws, 32); } static void (* r4k_blast_icache_page)(unsigned long addr); @@ -320,7 +324,7 @@ static void r4k_blast_icache_page_setup(void) r4k_blast_icache_page = (void *)cache_noop; else if (ic_lsize == 16) r4k_blast_icache_page = blast_icache16_page; - else if (ic_lsize == 32 && current_cpu_type() == CPU_LOONGSON2) + else if (ic_lsize == 32 && current_cpu_type() == CPU_LOONGSON2EF) r4k_blast_icache_page = loongson2_blast_icache32_page; else if (ic_lsize == 32) r4k_blast_icache_page = blast_icache32_page; @@ -369,7 +373,7 @@ static void r4k_blast_icache_page_indexed_setup(void) else if (TX49XX_ICACHE_INDEX_INV_WAR) r4k_blast_icache_page_indexed = tx49_blast_icache32_page_indexed; - else if (current_cpu_type() == CPU_LOONGSON2) + else if (current_cpu_type() == CPU_LOONGSON2EF) r4k_blast_icache_page_indexed = loongson2_blast_icache32_page_indexed; else @@ -395,7 +399,7 @@ static void r4k_blast_icache_setup(void) r4k_blast_icache = blast_r4600_v1_icache32; else if (TX49XX_ICACHE_INDEX_INV_WAR) r4k_blast_icache = tx49_blast_icache32; - else if (current_cpu_type() == CPU_LOONGSON2) + else if (current_cpu_type() == CPU_LOONGSON2EF) r4k_blast_icache = loongson2_blast_icache32; else r4k_blast_icache = blast_icache32; @@ -465,7 +469,7 @@ static void r4k_blast_scache_node_setup(void) { unsigned long sc_lsize = cpu_scache_line_size(); - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) r4k_blast_scache_node = (void *)cache_noop; else if (sc_lsize == 16) r4k_blast_scache_node = blast_scache16_node; @@ -480,7 +484,7 @@ static void r4k_blast_scache_node_setup(void) static inline void local_r4k___flush_cache_all(void * args) { switch (current_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: case CPU_R4000SC: case CPU_R4000MC: case CPU_R4400SC: @@ -497,7 +501,7 @@ static inline void local_r4k___flush_cache_all(void * args) r4k_blast_scache(); break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Use get_ebase_cpunum() for both NUMA=y/n */ r4k_blast_scache_node(get_ebase_cpunum() >> 2); break; @@ -770,7 +774,7 @@ static inline void __local_r4k_flush_icache_range(unsigned long start, r4k_blast_icache(); else { switch (boot_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: protected_loongson2_blast_icache_range(start, end); break; @@ -863,7 +867,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size) preempt_disable(); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) { - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) r4k_blast_scache(); else r4k_blast_scache_node(pa_to_nid(addr)); @@ -904,7 +908,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) preempt_disable(); if (cpu_has_inclusive_pcaches) { if (size >= scache_size) { - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) r4k_blast_scache(); else r4k_blast_scache_node(pa_to_nid(addr)); @@ -1224,7 +1228,7 @@ static void probe_pcache(void) c->options |= MIPS_CPU_PREFETCH; break; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: icache_size = 1 << (12 + ((config & CONF_IC) >> 9)); c->icache.linesz = 16 << ((config & CONF_IB) >> 5); if (prid & 0x3) @@ -1242,7 +1246,7 @@ static void probe_pcache(void) c->dcache.waybit = 0; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: config1 = read_c0_config1(); lsize = (config1 >> 19) & 7; if (lsize) @@ -1267,7 +1271,8 @@ static void probe_pcache(void) c->dcache.ways * c->dcache.linesz; c->dcache.waybit = 0; - if ((prid & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2_0) + if ((c->processor_id & (PRID_IMP_MASK | PRID_REV_MASK)) >= + (PRID_IMP_LOONGSON_64C | PRID_REV_LOONGSON3A_R2_0)) c->options |= MIPS_CPU_PREFETCH; break; @@ -1452,7 +1457,7 @@ static void probe_pcache(void) c->dcache.flags &= ~MIPS_CACHE_ALIASES; break; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: /* * LOONGSON2 has 4 way icache, but when using indexed cache op, * one op will act on all 4 ways @@ -1478,7 +1483,7 @@ static void probe_vcache(void) struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int config2, lsize; - if (current_cpu_type() != CPU_LOONGSON3) + if (current_cpu_type() != CPU_LOONGSON64) return; config2 = read_c0_config2(); @@ -1653,11 +1658,11 @@ static void setup_scache(void) #endif return; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: loongson2_sc_init(); return; - case CPU_LOONGSON3: + case CPU_LOONGSON64: loongson3_sc_init(); return; @@ -1926,7 +1931,7 @@ void r4k_cache_init(void) /* Optimization: an L2 flush implicitly flushes the L1 */ current_cpu_data.options |= MIPS_CPU_INCLUSIVE_CACHES; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Loongson-3 maintains cache coherency by hardware */ __flush_cache_all = cache_noop; __flush_cache_vmap = cache_noop; diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index 56e4f8bffd4c..c5578897a4fa 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -187,7 +187,7 @@ static void set_prefetch_parameters(void) } break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: /* Loongson-3 only support the Pref_Load/Pref_Store. */ pref_bias_clear_store = 128; pref_bias_copy_load = 128; diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index c13e46ced425..83b450ddbbc2 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -35,10 +35,10 @@ extern void build_tlb_refill_handler(void); static inline void flush_micro_tlb(void) { switch (current_cpu_type()) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: write_c0_diag(LOONGSON_DIAG_ITLB); break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: write_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB); break; default: diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 41bb91f05688..344e6e9ea43b 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -571,8 +571,8 @@ void build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_BMIPS4350: case CPU_BMIPS4380: case CPU_BMIPS5000: - case CPU_LOONGSON2: - case CPU_LOONGSON3: + case CPU_LOONGSON2EF: + case CPU_LOONGSON64: case CPU_R5500: if (m4kc_tlbp_war()) uasm_i_nop(p); @@ -1377,7 +1377,7 @@ static void build_r4000_tlb_refill_handler(void) switch (boot_cpu_type()) { default: if (sizeof(long) == 4) { - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: /* Loongson2 ebase is different than r4k, we have more space */ if ((p - tlb_handler) > 64) panic("TLB refill handler space exceeded"); diff --git a/arch/mips/oprofile/Makefile b/arch/mips/oprofile/Makefile index 011cf9f891e7..e10f216d0422 100644 --- a/arch/mips/oprofile/Makefile +++ b/arch/mips/oprofile/Makefile @@ -14,5 +14,5 @@ oprofile-$(CONFIG_CPU_MIPS64) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_R10000) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_SB1) += op_model_mipsxx.o oprofile-$(CONFIG_CPU_XLR) += op_model_mipsxx.o -oprofile-$(CONFIG_CPU_LOONGSON2) += op_model_loongson2.o -oprofile-$(CONFIG_CPU_LOONGSON3) += op_model_loongson3.o +oprofile-$(CONFIG_CPU_LOONGSON2EF) += op_model_loongson2.o +oprofile-$(CONFIG_CPU_LOONGSON64) += op_model_loongson3.o diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 2f33992f6dff..25cfa70f0ae4 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -104,10 +104,10 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) lmodel = &op_model_mipsxx_ops; break; - case CPU_LOONGSON2: + case CPU_LOONGSON2EF: lmodel = &op_model_loongson2_ops; break; - case CPU_LOONGSON3: + case CPU_LOONGSON64: lmodel = &op_model_loongson3_ops; break; }; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index d6de4cb2e31c..342ce10ef593 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o -obj-$(CONFIG_LOONGSON_MACH3X) += fixup-loongson3.o ops-loongson3.o +obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c index 7b4d40354ee7..312632171832 100644 --- a/arch/mips/pci/pci-xtalk-bridge.c +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -11,16 +11,22 @@ #include <linux/dma-direct.h> #include <linux/platform_device.h> #include <linux/platform_data/xtalk-bridge.h> +#include <linux/nvmem-consumer.h> +#include <linux/crc16.h> #include <asm/pci/bridge.h> #include <asm/paccess.h> #include <asm/sn/irq_alloc.h> +#include <asm/sn/ioc3.h> + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 /* * Most of the IOC3 PCI config register aren't present * we emulate what is needed for a normal PCI enumeration */ -static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value) +static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value, u32 sid) { u32 cf, shift, mask; @@ -30,6 +36,9 @@ static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value) if (get_dbe(cf, (u32 *)addr)) return PCIBIOS_DEVICE_NOT_FOUND; break; + case 0x2c: + cf = sid; + break; case 0x3c: /* emulate sane interrupt pin value */ cf = 0x00000100; @@ -111,7 +120,8 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; - return ioc3_cfg_rd(addr, where, size, value); + return ioc3_cfg_rd(addr, where, size, value, + bc->ioc3_sid[slot]); } addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; @@ -149,7 +159,8 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { addr = &bridge->b_type1_cfg.c[(fn << 8) | (where & ~3)]; - return ioc3_cfg_rd(addr, where, size, value); + return ioc3_cfg_rd(addr, where, size, value, + bc->ioc3_sid[slot]); } addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; @@ -285,7 +296,7 @@ static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask, ret = irq_chip_set_affinity_parent(d, mask, force); if (ret >= 0) { cpu = cpumask_first_and(mask, cpu_online_mask); - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); + nasid = cpu_to_node(cpu); bridge_write(data->bc, b_int_addr[pin].addr, (((data->bc->intr_addr >> 30) & 0x30000) | bit | (nasid << 8))); @@ -426,6 +437,117 @@ static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } +#define IOC3_SID(sid) (PCI_VENDOR_ID_SGI << 16 | (sid)) + +static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G); + bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO); +} + +static void bridge_setup_ip27_baseio(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO); +} + +static void bridge_setup_ip29_baseio(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD); +} + +static void bridge_setup_ip30_sysboard(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD); +} + +static void bridge_setup_menet(struct bridge_controller *bc) +{ + bc->ioc3_sid[0] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[3] = IOC3_SID(IOC3_SUBSYS_MENET4); +} + +#define BRIDGE_BOARD_SETUP(_partno, _setup) \ + { .match = _partno, .setup = _setup } + +static const struct { + char *match; + void (*setup)(struct bridge_controller *bc); +} bridge_ioc3_devid[] = { + BRIDGE_BOARD_SETUP("030-0734-", bridge_setup_ip27_baseio6g), + BRIDGE_BOARD_SETUP("030-0880-", bridge_setup_ip27_baseio6g), + BRIDGE_BOARD_SETUP("030-1023-", bridge_setup_ip27_baseio), + BRIDGE_BOARD_SETUP("030-1124-", bridge_setup_ip27_baseio), + BRIDGE_BOARD_SETUP("030-1025-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-1244-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-1389-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-0887-", bridge_setup_ip30_sysboard), + BRIDGE_BOARD_SETUP("030-1467-", bridge_setup_ip30_sysboard), + BRIDGE_BOARD_SETUP("030-0873-", bridge_setup_menet), +}; + +static void bridge_setup_board(struct bridge_controller *bc, char *partnum) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bridge_ioc3_devid); i++) + if (!strncmp(partnum, bridge_ioc3_devid[i].match, + strlen(bridge_ioc3_devid[i].match))) { + bridge_ioc3_devid[i].setup(bc); + } +} + +static int bridge_nvmem_match(struct device *dev, const void *data) +{ + const char *name = dev_name(dev); + const char *prefix = data; + + if (strlen(name) < strlen(prefix)) + return 0; + + return memcmp(prefix, dev_name(dev), strlen(prefix)) == 0; +} + +static int bridge_get_partnum(u64 baddr, char *partnum) +{ + struct nvmem_device *nvmem; + char prefix[24]; + u8 prom[64]; + int i, j; + int ret; + + snprintf(prefix, sizeof(prefix), "bridge-%012llx-0b-", baddr); + + nvmem = nvmem_device_find(prefix, bridge_nvmem_match); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + ret = nvmem_device_read(nvmem, 0, 64, prom); + nvmem_device_put(nvmem); + + if (ret != 64) + return ret; + + if (crc16(CRC16_INIT, prom, 32) != CRC16_VALID || + crc16(CRC16_INIT, prom + 32, 32) != CRC16_VALID) + return -EINVAL; + + /* Assemble part number */ + j = 0; + for (i = 0; i < 19; i++) + if (prom[i + 11] != ' ') + partnum[j++] = prom[i + 11]; + + for (i = 0; i < 6; i++) + if (prom[i + 32] != ' ') + partnum[j++] = prom[i + 32]; + + partnum[j] = 0; + + return 0; +} + static int bridge_probe(struct platform_device *pdev) { struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev); @@ -434,9 +556,14 @@ static int bridge_probe(struct platform_device *pdev) struct pci_host_bridge *host; struct irq_domain *domain, *parent; struct fwnode_handle *fn; + char partnum[26]; int slot; int err; + /* get part number from one wire prom */ + if (bridge_get_partnum(virt_to_phys((void *)bd->bridge_addr), partnum)) + return -EPROBE_DEFER; /* not available yet */ + parent = irq_get_default_host(); if (!parent) return -ENODEV; @@ -517,6 +644,8 @@ static int bridge_probe(struct platform_device *pdev) } bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */ + bridge_setup_board(bc, partnum); + host->dev.parent = dev; host->sysdata = bc; host->busnr = 0; diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c index 3340a5530de3..a15e29dfc7b3 100644 --- a/arch/mips/power/cpu.c +++ b/arch/mips/power/cpu.c @@ -19,8 +19,8 @@ void save_processor_state(void) if (is_fpu_owner()) save_fp(current); - if (cpu_has_dsp) - save_dsp(current); + + save_dsp(current); } void restore_processor_state(void) @@ -29,8 +29,8 @@ void restore_processor_state(void) if (is_fpu_owner()) restore_fp(current); - if (cpu_has_dsp) - restore_dsp(current); + + restore_dsp(current); } int pfn_is_nosave(unsigned long pfn) diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c index 1944d41507ef..74e5b9e27d6c 100644 --- a/arch/mips/sgi-ip22/ip22-mc.c +++ b/arch/mips/sgi-ip22/ip22-mc.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/export.h> #include <linux/kernel.h> +#include <linux/memblock.h> #include <linux/spinlock.h> #include <asm/io.h> @@ -40,70 +41,36 @@ static inline unsigned int get_bank_config(int bank) return bank % 2 ? res & 0xffff : res >> 16; } -struct mem { - unsigned long addr; - unsigned long size; -}; - +#if defined(CONFIG_SGI_IP28) || defined(CONFIG_32BIT) +static void __init probe_memory(void) +{ + /* prom detects all usable memory */ +} +#else /* - * Detect installed memory, do some sanity checks and notify kernel about it + * Detect installed memory, which PROM misses */ static void __init probe_memory(void) { - int i, j, found, cnt = 0; - struct mem bank[4]; - struct mem space[2] = {{SGIMC_SEG0_BADDR, 0}, {SGIMC_SEG1_BADDR, 0}}; + unsigned long addr, size; + int i; printk(KERN_INFO "MC: Probing memory configuration:\n"); - for (i = 0; i < ARRAY_SIZE(bank); i++) { + for (i = 0; i < 4; i++) { unsigned int tmp = get_bank_config(i); if (!(tmp & SGIMC_MCONFIG_BVALID)) continue; - bank[cnt].size = get_bank_size(tmp); - bank[cnt].addr = get_bank_addr(tmp); + size = get_bank_size(tmp); + addr = get_bank_addr(tmp); printk(KERN_INFO " bank%d: %3ldM @ %08lx\n", - i, bank[cnt].size / 1024 / 1024, bank[cnt].addr); - cnt++; - } + i, size / 1024 / 1024, addr); - /* And you thought bubble sort is dead algorithm... */ - do { - unsigned long addr, size; - - found = 0; - for (i = 1; i < cnt; i++) - if (bank[i-1].addr > bank[i].addr) { - addr = bank[i].addr; - size = bank[i].size; - bank[i].addr = bank[i-1].addr; - bank[i].size = bank[i-1].size; - bank[i-1].addr = addr; - bank[i-1].size = size; - found = 1; - } - } while (found); - - /* Figure out how are memory banks mapped into spaces */ - for (i = 0; i < cnt; i++) { - found = 0; - for (j = 0; j < ARRAY_SIZE(space) && !found; j++) - if (space[j].addr + space[j].size == bank[i].addr) { - space[j].size += bank[i].size; - found = 1; - } - /* There is either hole or overlapping memory */ - if (!found) - printk(KERN_CRIT "MC: Memory configuration mismatch " - "(%08lx), expect Bus Error soon\n", - bank[i].addr); + if (addr >= SGIMC_SEG1_BADDR) + memblock_add(addr, size); } - - for (i = 0; i < ARRAY_SIZE(space); i++) - if (space[i].size) - add_memory_region(space[i].addr, space[i].size, - BOOT_MEM_RAM); } +#endif void __init sgimc_init(void) { @@ -205,10 +172,9 @@ void __init sgimc_init(void) probe_memory(); } -void __init prom_meminit(void) {} -void __init prom_free_prom_memory(void) -{ #ifdef CONFIG_SGI_IP28 +void __init prom_cleanup(void) +{ u32 mconfig1; unsigned long flags; spinlock_t lock; @@ -233,5 +199,5 @@ void __init prom_free_prom_memory(void) sgimc->mconfig1 = mconfig1; iob(); spin_unlock_irqrestore(&lock, flags); -#endif } +#endif diff --git a/arch/mips/sgi-ip27/ip27-common.h b/arch/mips/sgi-ip27/ip27-common.h new file mode 100644 index 000000000000..3ffbcf9bfd41 --- /dev/null +++ b/arch/mips/sgi-ip27/ip27-common.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef __IP27_COMMON_H +#define __IP27_COMMON_H + +extern void ip27_reboot_setup(void); +extern void hub_rt_clock_event_init(void); +extern const struct plat_smp_ops ip27_smp_ops; + +#endif /* __IP27_COMMON_H */ diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index 6ebb8845a77c..a538d0ceb61d 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -25,10 +25,9 @@ static int force_fire_and_forget = 1; * @size: size of the PIO mapping * **/ -unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, +unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget, unsigned long xtalk_addr, size_t size) { - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); unsigned i; /* use small-window mapping if possible */ @@ -44,7 +43,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, xtalk_addr &= ~(BWIN_SIZE-1); for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) { - if (test_and_set_bit(i, hub_data(cnode)->h_bigwin_used)) + if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used)) continue; /* @@ -171,13 +170,12 @@ static void hub_set_piomode(nasid_t nasid) * * @hub: hubinfo structure for our hub */ -void hub_pio_init(cnodeid_t cnode) +void hub_pio_init(nasid_t nasid) { - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); unsigned i; /* initialize big window piomaps for this hub */ - bitmap_zero(hub_data(cnode)->h_bigwin_used, HUB_NUM_BIG_WINDOW); + bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW); for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) IIO_ITTE_DISABLE(nasid, i); diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 59d5375c9021..8fd3505e2b9c 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -13,9 +13,11 @@ #include <linux/mm.h> #include <linux/export.h> #include <linux/cpumask.h> +#include <asm/bootinfo.h> #include <asm/cpu.h> #include <asm/io.h> #include <asm/pgtable.h> +#include <asm/sgialib.h> #include <asm/time.h> #include <asm/sn/types.h> #include <asm/sn/sn0/addrs.h> @@ -36,30 +38,23 @@ #include <asm/sn/sn0/ip27.h> #include <asm/sn/mapped_kernel.h> +#include "ip27-common.h" + #define CPU_NONE (cpuid_t)-1 -static DECLARE_BITMAP(hub_init_mask, MAX_COMPACT_NODES); +static DECLARE_BITMAP(hub_init_mask, MAX_NUMNODES); nasid_t master_nasid = INVALID_NASID; -cnodeid_t nasid_to_compact_node[MAX_NASIDS]; -nasid_t compact_to_nasid_node[MAX_COMPACT_NODES]; -cnodeid_t cpuid_to_compact_node[MAXCPUS]; - -EXPORT_SYMBOL(nasid_to_compact_node); - struct cpuinfo_ip27 sn_cpu_info[NR_CPUS]; EXPORT_SYMBOL_GPL(sn_cpu_info); -extern void pcibr_setup(cnodeid_t); - -static void per_hub_init(cnodeid_t cnode) +static void per_hub_init(nasid_t nasid) { - struct hub_data *hub = hub_data(cnode); - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); + struct hub_data *hub = hub_data(nasid); cpumask_set_cpu(smp_processor_id(), &hub->h_cpus); - if (test_and_set_bit(cnode, hub_init_mask)) + if (test_and_set_bit(nasid, hub_init_mask)) return; /* * Set CRB timeout at 5ms, (< PI timeout of 10ms) @@ -67,14 +62,14 @@ static void per_hub_init(cnodeid_t cnode) REMOTE_HUB_S(nasid, IIO_ICTP, 0x800); REMOTE_HUB_S(nasid, IIO_ICTO, 0xff); - hub_rtc_init(cnode); + hub_rtc_init(nasid); #ifdef CONFIG_REPLICATE_EXHANDLERS /* * If this is not a headless node initialization, * copy over the caliased exception handlers. */ - if (get_compact_nodeid() == cnode) { + if (get_nasid() == nasid) { extern char except_vec2_generic, except_vec3_generic; extern void build_tlb_refill_handler(void); @@ -92,15 +87,15 @@ void per_cpu_init(void) { int cpu = smp_processor_id(); int slice = LOCAL_HUB_L(PI_CPU_NUM); - cnodeid_t cnode = get_compact_nodeid(); - struct hub_data *hub = hub_data(cnode); + nasid_t nasid = get_nasid(); + struct hub_data *hub = hub_data(nasid); if (test_and_set_bit(slice, &hub->slice_map)) return; clear_c0_status(ST0_IM); - per_hub_init(cnode); + per_hub_init(nasid); cpu_time_init(); install_ipi(); @@ -122,21 +117,13 @@ get_nasid(void) >> NSRI_NODEID_SHFT); } -/* - * Map the physical node id to a virtual node id (virtual node ids are contiguous). - */ -cnodeid_t get_compact_nodeid(void) -{ - return NASID_TO_COMPACT_NODEID(get_nasid()); -} - -extern void ip27_reboot_setup(void); - void __init plat_mem_setup(void) { u64 p, e, n_mode; nasid_t nid; + register_smp_ops(&ip27_smp_ops); + ip27_reboot_setup(); /* @@ -175,3 +162,15 @@ void __init plat_mem_setup(void) ioport_resource.end = ~0UL; set_io_port_base(IO_BASE); } + +const char *get_system_type(void) +{ + return "SGI Origin"; +} + +void __init prom_init(void) +{ + prom_init_cmdline(fw_arg0, (LONG *)fw_arg1); + prom_meminit(); +} + diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 37be04975831..5aef06e28a5b 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -73,7 +73,7 @@ static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask) int cpu; cpu = cpumask_first_and(mask, cpu_online_mask); - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); + nasid = cpu_to_node(cpu); hd->cpu = cpu; if (!cputoslice(cpu)) { hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_A); @@ -137,7 +137,7 @@ static int hub_domain_alloc(struct irq_domain *domain, unsigned int virq, handle_level_irq, NULL, NULL); /* use CPU connected to nearest hub */ - hub = hub_data(NASID_TO_COMPACT_NODEID(info->nasid)); + hub = hub_data(info->nasid); setup_hub_mask(hd, &hub->h_cpus); /* Make sure it's not already pending when we connect it. */ diff --git a/arch/mips/sgi-ip27/ip27-klconfig.c b/arch/mips/sgi-ip27/ip27-klconfig.c index 41171ff0c75e..6cb2160e7689 100644 --- a/arch/mips/sgi-ip27/ip27-klconfig.c +++ b/arch/mips/sgi-ip27/ip27-klconfig.c @@ -73,11 +73,6 @@ lboard_t *find_lboard_class(lboard_t *start, unsigned char brd_type) return (lboard_t *)NULL; } -cnodeid_t get_cpu_cnode(cpuid_t cpu) -{ - return CPUID_TO_COMPACT_NODEID(cpu); -} - klcpu_t *nasid_slice_to_cpuinfo(nasid_t nasid, int slice) { lboard_t *brd; @@ -102,19 +97,14 @@ klcpu_t *sn_get_cpuinfo(cpuid_t cpu) nasid_t nasid; int slice; klcpu_t *acpu; - gda_t *gdap = GDA; - cnodeid_t cnode; if (!(cpu < MAXCPUS)) { printk("sn_get_cpuinfo: illegal cpuid 0x%lx\n", cpu); return NULL; } - cnode = get_cpu_cnode(cpu); - if (cnode == INVALID_CNODEID) - return NULL; - - if ((nasid = gdap->g_nasidtable[cnode]) == INVALID_NASID) + nasid = cputonasid(cpu); + if (nasid == INVALID_NASID) return NULL; for (slice = 0; slice < CPUS_PER_NODE; slice++) { diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index a4f01328de62..ee1c6ff4aa00 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -38,13 +38,13 @@ void __init setup_replication_mask(void) #error Kernel replication works with mapped kernel support. No calias support. #endif { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) { - if (cnode == 0) + for_each_online_node(nasid) { + if (nasid == 0) continue; /* Advertise that we have a copy of the kernel */ - cpumask_set_cpu(cnode, &ktext_repmask); + cpumask_set_cpu(nasid, &ktext_repmask); } } #endif @@ -85,7 +85,6 @@ static __init void copy_kernel(nasid_t dest_nasid) void __init replicate_kernel_text(void) { - cnodeid_t cnode; nasid_t client_nasid; nasid_t server_nasid; @@ -94,13 +93,12 @@ void __init replicate_kernel_text(void) /* Record where the master node should get its kernel text */ set_ktext_source(master_nasid, master_nasid); - for_each_online_node(cnode) { - if (cnode == 0) + for_each_online_node(client_nasid) { + if (client_nasid == 0) continue; - client_nasid = COMPACT_TO_NASID_NODEID(cnode); /* Check if this node should get a copy of the kernel */ - if (cpumask_test_cpu(cnode, &ktext_repmask)) { + if (cpumask_test_cpu(client_nasid, &ktext_repmask)) { server_nasid = client_nasid; copy_kernel(server_nasid); } @@ -115,17 +113,16 @@ void __init replicate_kernel_text(void) * data structures on the first couple of pages of the first slot of each * node. If this is the case, getfirstfree(node) > getslotstart(node, 0). */ -unsigned long node_getfirstfree(cnodeid_t cnode) +unsigned long node_getfirstfree(nasid_t nasid) { unsigned long loadbase = REP_BASE; - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); unsigned long offset; #ifdef CONFIG_MAPPED_KERNEL loadbase += 16777216; #endif offset = PAGE_ALIGN((unsigned long)(&_end)) - loadbase; - if ((cnode == 0) || (cpumask_test_cpu(cnode, &ktext_repmask))) + if ((nasid == 0) || (cpumask_test_cpu(nasid, &ktext_repmask))) return TO_NODE(nasid, offset) >> PAGE_SHIFT; else return KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >> PAGE_SHIFT; diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index fb077a947575..f610fff592a6 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -33,7 +33,7 @@ #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) -struct node_data *__node_data[MAX_COMPACT_NODES]; +struct node_data *__node_data[MAX_NUMNODES]; EXPORT_SYMBOL(__node_data); @@ -44,23 +44,23 @@ static int is_fine_dirmode(void) return ((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE; } -static u64 get_region(cnodeid_t cnode) +static u64 get_region(nasid_t nasid) { if (fine_mode) - return COMPACT_TO_NASID_NODEID(cnode) >> NASID_TO_FINEREG_SHFT; + return nasid >> NASID_TO_FINEREG_SHFT; else - return COMPACT_TO_NASID_NODEID(cnode) >> NASID_TO_COARSEREG_SHFT; + return nasid >> NASID_TO_COARSEREG_SHFT; } static u64 region_mask; static void gen_region_mask(u64 *region_mask) { - cnodeid_t cnode; + nasid_t nasid; (*region_mask) = 0; - for_each_online_node(cnode) { - (*region_mask) |= 1ULL << get_region(cnode); + for_each_online_node(nasid) { + (*region_mask) |= 1ULL << get_region(nasid); } } @@ -104,23 +104,18 @@ static void router_recurse(klrou_t *router_a, klrou_t *router_b, int depth) router_a->rou_rflag = 0; } -unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; +unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES]; EXPORT_SYMBOL(__node_distances); static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b) { klrou_t *router, *router_a = NULL, *router_b = NULL; lboard_t *brd, *dest_brd; - cnodeid_t cnode; nasid_t nasid; int port; /* Figure out which routers nodes in question are connected to */ - for_each_online_node(cnode) { - nasid = COMPACT_TO_NASID_NODEID(cnode); - - if (nasid == -1) continue; - + for_each_online_node(nasid) { brd = find_lboard_class((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_ROUTER); @@ -176,19 +171,16 @@ static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b) static void __init init_topology_matrix(void) { - nasid_t nasid, nasid2; - cnodeid_t row, col; + nasid_t row, col; - for (row = 0; row < MAX_COMPACT_NODES; row++) - for (col = 0; col < MAX_COMPACT_NODES; col++) + for (row = 0; row < MAX_NUMNODES; row++) + for (col = 0; col < MAX_NUMNODES; col++) __node_distances[row][col] = -1; for_each_online_node(row) { - nasid = COMPACT_TO_NASID_NODEID(row); for_each_online_node(col) { - nasid2 = COMPACT_TO_NASID_NODEID(col); __node_distances[row][col] = - compute_node_distance(nasid, nasid2); + compute_node_distance(row, col); } } } @@ -196,12 +188,11 @@ static void __init init_topology_matrix(void) static void __init dump_topology(void) { nasid_t nasid; - cnodeid_t cnode; lboard_t *brd, *dest_brd; int port; int router_num = 0; klrou_t *router; - cnodeid_t row, col; + nasid_t row, col; pr_info("************** Topology ********************\n"); @@ -216,11 +207,7 @@ static void __init dump_topology(void) pr_cont("\n"); } - for_each_online_node(cnode) { - nasid = COMPACT_TO_NASID_NODEID(cnode); - - if (nasid == -1) continue; - + for_each_online_node(nasid) { brd = find_lboard_class((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_ROUTER); @@ -254,21 +241,17 @@ static void __init dump_topology(void) } } -static unsigned long __init slot_getbasepfn(cnodeid_t cnode, int slot) +static unsigned long __init slot_getbasepfn(nasid_t nasid, int slot) { - nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); - return ((unsigned long)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT); } -static unsigned long __init slot_psize_compute(cnodeid_t node, int slot) +static unsigned long __init slot_psize_compute(nasid_t nasid, int slot) { - nasid_t nasid; lboard_t *brd; klmembnk_t *banks; unsigned long size; - nasid = COMPACT_TO_NASID_NODEID(node); /* Find the node board */ brd = find_lboard((lboard_t *)KL_CONFIG_INFO(nasid), KLTYPE_IP27); if (!brd) @@ -298,7 +281,7 @@ static unsigned long __init slot_psize_compute(cnodeid_t node, int slot) static void __init mlreset(void) { - int i; + nasid_t nasid; master_nasid = get_nasid(); fine_mode = is_fine_dirmode(); @@ -321,11 +304,7 @@ static void __init mlreset(void) /* * Set all nodes' calias sizes to 8k */ - for_each_online_node(i) { - nasid_t nasid; - - nasid = COMPACT_TO_NASID_NODEID(i); - + for_each_online_node(nasid) { /* * Always have node 0 in the region mask, otherwise * CALIAS accesses get exceptions since the hub @@ -354,7 +333,7 @@ static void __init szmem(void) { unsigned long slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */ int slot; - cnodeid_t node; + nasid_t node; for_each_online_node(node) { nodebytes = 0; @@ -384,7 +363,7 @@ static void __init szmem(void) } } -static void __init node_mem_init(cnodeid_t node) +static void __init node_mem_init(nasid_t node) { unsigned long slot_firstpfn = slot_getbasepfn(node, 0); unsigned long slot_freepfn = node_getfirstfree(node); @@ -406,12 +385,8 @@ static void __init node_mem_init(cnodeid_t node) slot_freepfn += PFN_UP(sizeof(struct pglist_data) + sizeof(struct hub_data)); - free_bootmem_with_active_regions(node, end_pfn); - memblock_reserve(slot_firstpfn << PAGE_SHIFT, ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT)); - - sparse_memory_present_with_active_regions(node); } /* @@ -431,19 +406,21 @@ static struct node_data null_node = { */ void __init prom_meminit(void) { - cnodeid_t node; + nasid_t node; mlreset(); szmem(); max_low_pfn = PHYS_PFN(memblock_end_of_DRAM()); - for (node = 0; node < MAX_COMPACT_NODES; node++) { + for (node = 0; node < MAX_NUMNODES; node++) { if (node_online(node)) { node_mem_init(node); continue; } __node_data[node] = &null_node; } + + memblocks_present(); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 3aae388561d9..daf3670d94e7 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -17,8 +17,6 @@ #define NODE_NUM_CPUS(n) CPUS_PER_NODE #endif -#define CNODEID_NONE (cnodeid_t)-1 - typedef unsigned long machreg_t; static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED; @@ -152,16 +150,10 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice) * Copy the cpu registers which have been saved in the IP27prom format * into the eframe format for the node under consideration. */ -void nmi_node_eframe_save(cnodeid_t cnode) +void nmi_node_eframe_save(nasid_t nasid) { - nasid_t nasid; int slice; - /* Make sure that we have a valid node */ - if (cnode == CNODEID_NONE) - return; - - nasid = COMPACT_TO_NASID_NODEID(cnode); if (nasid == INVALID_NASID) return; @@ -178,10 +170,10 @@ void nmi_node_eframe_save(cnodeid_t cnode) void nmi_eframes_save(void) { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) - nmi_node_eframe_save(cnode); + for_each_online_node(nasid) + nmi_node_eframe_save(nasid); } void diff --git a/arch/mips/sgi-ip27/ip27-reset.c b/arch/mips/sgi-ip27/ip27-reset.c index e44a15d4f573..74d078247e49 100644 --- a/arch/mips/sgi-ip27/ip27-reset.c +++ b/arch/mips/sgi-ip27/ip27-reset.c @@ -26,6 +26,8 @@ #include <asm/sn/gda.h> #include <asm/sn/sn0/hub.h> +#include "ip27-common.h" + void machine_restart(char *command) __noreturn; void machine_halt(void) __noreturn; void machine_power_off(void) __noreturn; @@ -45,8 +47,7 @@ static void ip27_machine_restart(char *command) #endif #if 0 for_each_online_node(i) - REMOTE_HUB_S(COMPACT_TO_NASID_NODEID(i), PROMOP_REG, - PROMOP_REBOOT); + REMOTE_HUB_S(i, PROMOP_REG, PROMOP_REBOOT); #else LOCAL_HUB_S(NI_PORT_RESET, NPR_PORTRESET | NPR_LOCALRESET); #endif @@ -61,8 +62,7 @@ static void ip27_machine_halt(void) smp_send_stop(); #endif for_each_online_node(i) - REMOTE_HUB_S(COMPACT_TO_NASID_NODEID(i), PROMOP_REG, - PROMOP_RESTART); + REMOTE_HUB_S(i, PROMOP_REG, PROMOP_RESTART); LOCAL_HUB_S(NI_PORT_RESET, NPR_PORTRESET | NPR_LOCALRESET); noreturn; } diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 20b81209c6b8..faa0244c8b0c 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -27,38 +27,19 @@ #include <asm/sn/sn0/hubio.h> #include <asm/sn/sn0/ip27.h> +#include "ip27-common.h" + /* * Takes as first input the PROM assigned cpu id, and the kernel * assigned cpu id as the second. */ -static void alloc_cpupda(cpuid_t cpu, int cpunum) +static void alloc_cpupda(nasid_t nasid, cpuid_t cpu, int cpunum) { - cnodeid_t node = get_cpu_cnode(cpu); - nasid_t nasid = COMPACT_TO_NASID_NODEID(node); - cputonasid(cpunum) = nasid; - sn_cpu_info[cpunum].p_nodeid = node; cputoslice(cpunum) = get_cpu_slice(cpu); } -static nasid_t get_actual_nasid(lboard_t *brd) -{ - klhub_t *hub; - - if (!brd) - return INVALID_NASID; - - /* find out if we are a completely disabled brd. */ - hub = (klhub_t *)find_first_component(brd, KLSTRUCT_HUB); - if (!hub) - return INVALID_NASID; - if (!(hub->hub_info.flags & KLINFO_ENABLE)) /* disabled node brd */ - return hub->hub_info.physid; - else - return brd->brd_nasid; -} - -static int do_cpumask(cnodeid_t cnode, nasid_t nasid, int highest) +static int do_cpumask(nasid_t nasid, int highest) { static int tot_cpus_found = 0; lboard_t *brd; @@ -72,16 +53,13 @@ static int do_cpumask(cnodeid_t cnode, nasid_t nasid, int highest) acpu = (klcpu_t *)find_first_component(brd, KLSTRUCT_CPU); while (acpu) { cpuid = acpu->cpu_info.virtid; - /* cnode is not valid for completely disabled brds */ - if (get_actual_nasid(brd) == brd->brd_nasid) - cpuid_to_compact_node[cpuid] = cnode; - if (cpuid > highest) - highest = cpuid; /* Only let it join in if it's marked enabled */ if ((acpu->cpu_info.flags & KLINFO_ENABLE) && (tot_cpus_found != NR_CPUS)) { + if (cpuid > highest) + highest = cpuid; set_cpu_possible(cpuid, true); - alloc_cpupda(cpuid, tot_cpus_found); + alloc_cpupda(nasid, cpuid, tot_cpus_found); cpus_found++; tot_cpus_found++; } @@ -103,29 +81,13 @@ void cpu_node_probe(void) int i, highest = 0; gda_t *gdap = GDA; - /* - * Initialize the arrays to invalid nodeid (-1) - */ - for (i = 0; i < MAX_COMPACT_NODES; i++) - compact_to_nasid_node[i] = INVALID_NASID; - for (i = 0; i < MAX_NASIDS; i++) - nasid_to_compact_node[i] = INVALID_CNODEID; - for (i = 0; i < MAXCPUS; i++) - cpuid_to_compact_node[i] = INVALID_CNODEID; - - /* - * MCD - this whole "compact node" stuff can probably be dropped, - * as we can handle sparse numbering now - */ nodes_clear(node_online_map); - for (i = 0; i < MAX_COMPACT_NODES; i++) { + for (i = 0; i < MAX_NUMNODES; i++) { nasid_t nasid = gdap->g_nasidtable[i]; if (nasid == INVALID_NASID) break; - compact_to_nasid_node[i] = nasid; - nasid_to_compact_node[nasid] = i; - node_set_online(num_online_nodes()); - highest = do_cpumask(i, nasid, highest); + node_set_online(nasid); + highest = do_cpumask(nasid, highest); } printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes()); @@ -162,11 +124,10 @@ static void ip27_send_ipi_single(int destid, unsigned int action) irq += cputoslice(destid); /* - * Convert the compact hub number to the NASID to get the correct - * part of the address space. Then set the interrupt bit associated - * with the CPU we want to send the interrupt to. + * Set the interrupt bit associated with the CPU we want to + * send the interrupt to. */ - REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq); + REMOTE_HUB_SEND_INTR(cpu_to_node(destid), irq); } static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action) @@ -184,8 +145,6 @@ static void ip27_init_cpu(void) static void ip27_smp_finish(void) { - extern void hub_rt_clock_event_init(void); - hub_rt_clock_event_init(); local_irq_enable(); } @@ -208,23 +167,20 @@ static int ip27_boot_secondary(int cpu, struct task_struct *idle) static void __init ip27_smp_setup(void) { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) { - if (cnode == 0) + for_each_online_node(nasid) { + if (nasid == 0) continue; - intr_clear_all(COMPACT_TO_NASID_NODEID(cnode)); + intr_clear_all(nasid); } replicate_kernel_text(); /* - * Assumption to be fixed: we're always booted on logical / physical - * processor 0. While we're always running on logical processor 0 - * this still means this is physical processor zero; it might for - * example be disabled in the firmware. + * PROM sets up system, that boot cpu is always first CPU on nasid 0 */ - alloc_cpupda(0, 0); + alloc_cpupda(0, 0, 0); } static void __init ip27_prepare_cpus(unsigned int max_cpus) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9b4b9ac621a3..17302bbfa7a6 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -38,6 +38,8 @@ #include <asm/sn/sn0/hubio.h> #include <asm/pci/bridge.h> +#include "ip27-common.h" + static int rt_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); @@ -170,7 +172,7 @@ void cpu_time_init(void) printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); } -void hub_rtc_init(cnodeid_t cnode) +void hub_rtc_init(nasid_t nasid) { /* @@ -178,7 +180,7 @@ void hub_rtc_init(cnodeid_t cnode) * If this is not the current node then it is a cpuless * node and timeouts will not happen there. */ - if (get_compact_nodeid() == cnode) { + if (get_nasid() == nasid) { LOCAL_HUB_S(PI_RT_EN_A, 1); LOCAL_HUB_S(PI_RT_EN_B, 1); LOCAL_HUB_S(PI_PROF_EN_A, 0); diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 4a1f0b0c29e2..5218b900f855 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/smp.h> #include <linux/platform_device.h> +#include <linux/platform_data/sgi-w1.h> #include <linux/platform_data/xtalk-bridge.h> #include <asm/sn/addrs.h> #include <asm/sn/types.h> @@ -26,9 +27,35 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) { struct xtalk_bridge_platform_data *bd; + struct sgi_w1_platform_data *wd; struct platform_device *pdev; + struct resource w1_res; unsigned long offset; + offset = NODE_OFFSET(nasid); + + wd = kzalloc(sizeof(*wd), GFP_KERNEL); + if (!wd) + goto no_mem; + + snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx", + offset + (widget << SWIN_SIZE_BITS)); + + memset(&w1_res, 0, sizeof(w1_res)); + w1_res.start = offset + (widget << SWIN_SIZE_BITS) + + offsetof(struct bridge_regs, b_nic); + w1_res.end = w1_res.start + 3; + w1_res.flags = IORESOURCE_MEM; + + pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO); + if (!pdev) { + kfree(wd); + goto no_mem; + } + platform_device_add_resources(pdev, &w1_res, 1); + platform_device_add_data(pdev, wd, sizeof(*wd)); + platform_device_add(pdev); + bd = kzalloc(sizeof(*bd), GFP_KERNEL); if (!bd) goto no_mem; @@ -38,7 +65,6 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) goto no_mem; } - offset = NODE_OFFSET(nasid); bd->bridge_addr = RAW_NODE_SWIN_BASE(nasid, widget); bd->intr_addr = BIT_ULL(47) + 0x01800000 + PI_INT_PEND_MOD; @@ -46,14 +72,14 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid) bd->masterwid = masterwid; bd->mem.name = "Bridge PCI MEM"; - bd->mem.start = offset + (widget << SWIN_SIZE_BITS); - bd->mem.end = bd->mem.start + SWIN_SIZE - 1; + bd->mem.start = offset + (widget << SWIN_SIZE_BITS) + BRIDGE_DEVIO0; + bd->mem.end = offset + (widget << SWIN_SIZE_BITS) + SWIN_SIZE - 1; bd->mem.flags = IORESOURCE_MEM; bd->mem_offset = offset; bd->io.name = "Bridge PCI IO"; - bd->io.start = offset + (widget << SWIN_SIZE_BITS); - bd->io.end = bd->io.start + SWIN_SIZE - 1; + bd->io.start = offset + (widget << SWIN_SIZE_BITS) + BRIDGE_DEVIO0; + bd->io.end = offset + (widget << SWIN_SIZE_BITS) + SWIN_SIZE - 1; bd->io.flags = IORESOURCE_IO; bd->io_offset = offset; @@ -81,6 +107,8 @@ static int probe_one_port(nasid_t nasid, int widget, int masterwid) bridge_platform_create(nasid, widget, masterwid); break; default: + pr_info("xtalk:n%d/%d unknown widget (0x%x)\n", + nasid, widget, partnum); break; } @@ -138,14 +166,12 @@ static int xbow_probe(nasid_t nasid) return 0; } -static void xtalk_probe_node(cnodeid_t nid) +static void xtalk_probe_node(nasid_t nasid) { volatile u64 hubreg; - nasid_t nasid; xwidget_part_num_t partnum; widgetreg_t widget_id; - nasid = COMPACT_TO_NASID_NODEID(nid); hubreg = REMOTE_HUB_L(nasid, IIO_LLP_CSR); /* check whether the link is up */ @@ -173,10 +199,10 @@ static void xtalk_probe_node(cnodeid_t nid) static int __init xtalk_init(void) { - cnodeid_t cnode; + nasid_t nasid; - for_each_online_node(cnode) - xtalk_probe_node(cnode); + for_each_online_node(nasid) + xtalk_probe_node(nasid); return 0; } diff --git a/arch/mips/tools/.gitignore b/arch/mips/tools/.gitignore index 56d34ccccce4..b0209450d9ff 100644 --- a/arch/mips/tools/.gitignore +++ b/arch/mips/tools/.gitignore @@ -1 +1,2 @@ elf-entry +loongson3-llsc-check diff --git a/arch/mips/tools/Makefile b/arch/mips/tools/Makefile index 3baee4bc6775..aaef688749f5 100644 --- a/arch/mips/tools/Makefile +++ b/arch/mips/tools/Makefile @@ -3,3 +3,8 @@ hostprogs-y := elf-entry PHONY += elf-entry elf-entry: $(obj)/elf-entry @: + +hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check +PHONY += loongson3-llsc-check +loongson3-llsc-check: $(obj)/loongson3-llsc-check + @: diff --git a/arch/mips/tools/loongson3-llsc-check.c b/arch/mips/tools/loongson3-llsc-check.c new file mode 100644 index 000000000000..0ebddd0ae46f --- /dev/null +++ b/arch/mips/tools/loongson3-llsc-check.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <byteswap.h> +#include <elf.h> +#include <endian.h> +#include <errno.h> +#include <fcntl.h> +#include <inttypes.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/mman.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> + +#ifdef be32toh +/* If libc provides le{16,32,64}toh() then we'll use them */ +#elif BYTE_ORDER == LITTLE_ENDIAN +# define le16toh(x) (x) +# define le32toh(x) (x) +# define le64toh(x) (x) +#elif BYTE_ORDER == BIG_ENDIAN +# define le16toh(x) bswap_16(x) +# define le32toh(x) bswap_32(x) +# define le64toh(x) bswap_64(x) +#endif + +/* MIPS opcodes, in bits 31:26 of an instruction */ +#define OP_SPECIAL 0x00 +#define OP_REGIMM 0x01 +#define OP_BEQ 0x04 +#define OP_BNE 0x05 +#define OP_BLEZ 0x06 +#define OP_BGTZ 0x07 +#define OP_BEQL 0x14 +#define OP_BNEL 0x15 +#define OP_BLEZL 0x16 +#define OP_BGTZL 0x17 +#define OP_LL 0x30 +#define OP_LLD 0x34 +#define OP_SC 0x38 +#define OP_SCD 0x3c + +/* Bits 20:16 of OP_REGIMM instructions */ +#define REGIMM_BLTZ 0x00 +#define REGIMM_BGEZ 0x01 +#define REGIMM_BLTZL 0x02 +#define REGIMM_BGEZL 0x03 +#define REGIMM_BLTZAL 0x10 +#define REGIMM_BGEZAL 0x11 +#define REGIMM_BLTZALL 0x12 +#define REGIMM_BGEZALL 0x13 + +/* Bits 5:0 of OP_SPECIAL instructions */ +#define SPECIAL_SYNC 0x0f + +static void usage(FILE *f) +{ + fprintf(f, "Usage: loongson3-llsc-check /path/to/vmlinux\n"); +} + +static int se16(uint16_t x) +{ + return (int16_t)x; +} + +static bool is_ll(uint32_t insn) +{ + switch (insn >> 26) { + case OP_LL: + case OP_LLD: + return true; + + default: + return false; + } +} + +static bool is_sc(uint32_t insn) +{ + switch (insn >> 26) { + case OP_SC: + case OP_SCD: + return true; + + default: + return false; + } +} + +static bool is_sync(uint32_t insn) +{ + /* Bits 31:11 should all be zeroes */ + if (insn >> 11) + return false; + + /* Bits 5:0 specify the SYNC special encoding */ + if ((insn & 0x3f) != SPECIAL_SYNC) + return false; + + return true; +} + +static bool is_branch(uint32_t insn, int *off) +{ + switch (insn >> 26) { + case OP_BEQ: + case OP_BEQL: + case OP_BNE: + case OP_BNEL: + case OP_BGTZ: + case OP_BGTZL: + case OP_BLEZ: + case OP_BLEZL: + *off = se16(insn) + 1; + return true; + + case OP_REGIMM: + switch ((insn >> 16) & 0x1f) { + case REGIMM_BGEZ: + case REGIMM_BGEZL: + case REGIMM_BGEZAL: + case REGIMM_BGEZALL: + case REGIMM_BLTZ: + case REGIMM_BLTZL: + case REGIMM_BLTZAL: + case REGIMM_BLTZALL: + *off = se16(insn) + 1; + return true; + + default: + return false; + } + + default: + return false; + } +} + +static int check_ll(uint64_t pc, uint32_t *code, size_t sz) +{ + ssize_t i, max, sc_pos; + int off; + + /* + * Every LL must be preceded by a sync instruction in order to ensure + * that instruction reordering doesn't allow a prior memory access to + * execute after the LL & cause erroneous results. + */ + if (!is_sync(le32toh(code[-1]))) { + fprintf(stderr, "%" PRIx64 ": LL not preceded by sync\n", pc); + return -EINVAL; + } + + /* Find the matching SC instruction */ + max = sz / 4; + for (sc_pos = 0; sc_pos < max; sc_pos++) { + if (is_sc(le32toh(code[sc_pos]))) + break; + } + if (sc_pos >= max) { + fprintf(stderr, "%" PRIx64 ": LL has no matching SC\n", pc); + return -EINVAL; + } + + /* + * Check branches within the LL/SC loop target sync instructions, + * ensuring that speculative execution can't generate memory accesses + * due to instructions outside of the loop. + */ + for (i = 0; i < sc_pos; i++) { + if (!is_branch(le32toh(code[i]), &off)) + continue; + + /* + * If the branch target is within the LL/SC loop then we don't + * need to worry about it. + */ + if ((off >= -i) && (off <= sc_pos)) + continue; + + /* If the branch targets a sync instruction we're all good... */ + if (is_sync(le32toh(code[i + off]))) + continue; + + /* ...but if not, we have a problem */ + fprintf(stderr, "%" PRIx64 ": Branch target not a sync\n", + pc + (i * 4)); + return -EINVAL; + } + + return 0; +} + +static int check_code(uint64_t pc, uint32_t *code, size_t sz) +{ + int err = 0; + + if (sz % 4) { + fprintf(stderr, "%" PRIx64 ": Section size not a multiple of 4\n", + pc); + err = -EINVAL; + sz -= (sz % 4); + } + + if (is_ll(le32toh(code[0]))) { + fprintf(stderr, "%" PRIx64 ": First instruction in section is an LL\n", + pc); + err = -EINVAL; + } + +#define advance() ( \ + code++, \ + pc += 4, \ + sz -= 4 \ +) + + /* + * Skip the first instructionm allowing check_ll to look backwards + * unconditionally. + */ + advance(); + + /* Now scan through the code looking for LL instructions */ + for (; sz; advance()) { + if (is_ll(le32toh(code[0]))) + err |= check_ll(pc, code, sz); + } + + return err; +} + +int main(int argc, char *argv[]) +{ + int vmlinux_fd, status, err, i; + const char *vmlinux_path; + struct stat st; + Elf64_Ehdr *eh; + Elf64_Shdr *sh; + void *vmlinux; + + status = EXIT_FAILURE; + + if (argc < 2) { + usage(stderr); + goto out_ret; + } + + vmlinux_path = argv[1]; + vmlinux_fd = open(vmlinux_path, O_RDONLY); + if (vmlinux_fd == -1) { + perror("Unable to open vmlinux"); + goto out_ret; + } + + err = fstat(vmlinux_fd, &st); + if (err) { + perror("Unable to stat vmlinux"); + goto out_close; + } + + vmlinux = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, vmlinux_fd, 0); + if (vmlinux == MAP_FAILED) { + perror("Unable to mmap vmlinux"); + goto out_close; + } + + eh = vmlinux; + if (memcmp(eh->e_ident, ELFMAG, SELFMAG)) { + fprintf(stderr, "vmlinux is not an ELF?\n"); + goto out_munmap; + } + + if (eh->e_ident[EI_CLASS] != ELFCLASS64) { + fprintf(stderr, "vmlinux is not 64b?\n"); + goto out_munmap; + } + + if (eh->e_ident[EI_DATA] != ELFDATA2LSB) { + fprintf(stderr, "vmlinux is not little endian?\n"); + goto out_munmap; + } + + for (i = 0; i < le16toh(eh->e_shnum); i++) { + sh = vmlinux + le64toh(eh->e_shoff) + (i * le16toh(eh->e_shentsize)); + + if (sh->sh_type != SHT_PROGBITS) + continue; + if (!(sh->sh_flags & SHF_EXECINSTR)) + continue; + + err = check_code(le64toh(sh->sh_addr), + vmlinux + le64toh(sh->sh_offset), + le64toh(sh->sh_size)); + if (err) + goto out_munmap; + } + + status = EXIT_SUCCESS; +out_munmap: + munmap(vmlinux, st.st_size); +out_close: + close(vmlinux_fd); +out_ret: + return status; +} diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c index 890813e0bb76..e9caa9586982 100644 --- a/drivers/cpufreq/loongson2_cpufreq.c +++ b/drivers/cpufreq/loongson2_cpufreq.c @@ -23,7 +23,7 @@ #include <asm/clock.h> #include <asm/idle.h> -#include <asm/mach-loongson64/loongson.h> +#include <asm/mach-loongson2ef/loongson.h> static uint nowait; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 38e096e6925f..92d0ff63b3ea 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -298,7 +298,7 @@ config GPIO_IXP4XX config GPIO_LOONGSON bool "Loongson-2/3 GPIO support" - depends on CPU_LOONGSON2 || CPU_LOONGSON3 + depends on CPU_LOONGSON2EF || CPU_LOONGSON64 help driver for GPIO functionality on Loongson-2F/3A/3B processors. diff --git a/drivers/gpio/gpio-loongson.c b/drivers/gpio/gpio-loongson.c index 00943170ce36..a42145873cc9 100644 --- a/drivers/gpio/gpio-loongson.c +++ b/drivers/gpio/gpio-loongson.c @@ -22,7 +22,7 @@ #define STLS2F_N_GPIO 4 #define STLS3A_N_GPIO 16 -#ifdef CONFIG_CPU_LOONGSON3 +#ifdef CONFIG_CPU_LOONGSON64 #define LOONGSON_N_GPIO STLS3A_N_GPIO #else #define LOONGSON_N_GPIO STLS2F_N_GPIO diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 057d1ff87d5d..9f1ee9c766ec 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -76,33 +76,6 @@ static struct bus_type nvmem_bus_type = { .name = "nvmem", }; -static struct nvmem_device *of_nvmem_find(struct device_node *nvmem_np) -{ - struct device *d; - - if (!nvmem_np) - return NULL; - - d = bus_find_device_by_of_node(&nvmem_bus_type, nvmem_np); - - if (!d) - return NULL; - - return to_nvmem_device(d); -} - -static struct nvmem_device *nvmem_find(const char *name) -{ - struct device *d; - - d = bus_find_device_by_name(&nvmem_bus_type, NULL, name); - - if (!d) - return NULL; - - return to_nvmem_device(d); -} - static void nvmem_cell_drop(struct nvmem_cell *cell) { blocking_notifier_call_chain(&nvmem_notifier, NVMEM_CELL_REMOVE, cell); @@ -532,13 +505,16 @@ int devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem) } EXPORT_SYMBOL(devm_nvmem_unregister); -static struct nvmem_device *__nvmem_device_get(struct device_node *np, - const char *nvmem_name) +static struct nvmem_device *__nvmem_device_get(void *data, + int (*match)(struct device *dev, const void *data)) { struct nvmem_device *nvmem = NULL; + struct device *dev; mutex_lock(&nvmem_mutex); - nvmem = np ? of_nvmem_find(np) : nvmem_find(nvmem_name); + dev = bus_find_device(&nvmem_bus_type, NULL, data, match); + if (dev) + nvmem = to_nvmem_device(dev); mutex_unlock(&nvmem_mutex); if (!nvmem) return ERR_PTR(-EPROBE_DEFER); @@ -587,7 +563,7 @@ struct nvmem_device *of_nvmem_device_get(struct device_node *np, const char *id) if (!nvmem_np) return ERR_PTR(-ENOENT); - return __nvmem_device_get(nvmem_np, NULL); + return __nvmem_device_get(nvmem_np, device_match_of_node); } EXPORT_SYMBOL_GPL(of_nvmem_device_get); #endif @@ -613,10 +589,26 @@ struct nvmem_device *nvmem_device_get(struct device *dev, const char *dev_name) } - return __nvmem_device_get(NULL, dev_name); + return __nvmem_device_get((void *)dev_name, device_match_name); } EXPORT_SYMBOL_GPL(nvmem_device_get); +/** + * nvmem_device_find() - Find nvmem device with matching function + * + * @data: Data to pass to match function + * @match: Callback function to check device + * + * Return: ERR_PTR() on error or a valid pointer to a struct nvmem_device + * on success. + */ +struct nvmem_device *nvmem_device_find(void *data, + int (*match)(struct device *dev, const void *data)) +{ + return __nvmem_device_get(data, match); +} +EXPORT_SYMBOL_GPL(nvmem_device_find); + static int devm_nvmem_device_match(struct device *dev, void *res, void *data) { struct nvmem_device **nvmem = res; @@ -710,7 +702,8 @@ nvmem_cell_get_from_lookup(struct device *dev, const char *con_id) if ((strcmp(lookup->dev_id, dev_id) == 0) && (strcmp(lookup->con_id, con_id) == 0)) { /* This is the right entry. */ - nvmem = __nvmem_device_get(NULL, lookup->nvmem_name); + nvmem = __nvmem_device_get((void *)lookup->nvmem_name, + device_match_name); if (IS_ERR(nvmem)) { /* Provider may not be registered yet. */ cell = ERR_CAST(nvmem); @@ -780,7 +773,7 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id) if (!nvmem_np) return ERR_PTR(-EINVAL); - nvmem = __nvmem_device_get(nvmem_np, NULL); + nvmem = __nvmem_device_get(nvmem_np, device_match_of_node); of_node_put(nvmem_np); if (IS_ERR(nvmem)) return ERR_CAST(nvmem); diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig index 62ea1934fb6a..f4d0a86c00d0 100644 --- a/drivers/platform/mips/Kconfig +++ b/drivers/platform/mips/Kconfig @@ -17,8 +17,8 @@ menuconfig MIPS_PLATFORM_DEVICES if MIPS_PLATFORM_DEVICES config CPU_HWMON - tristate "Loongson CPU HWMon Driver" - depends on LOONGSON_MACH3X + tristate "Loongson-3 CPU HWMon Driver" + depends on CONFIG_MACH_LOONGSON64 select HWMON default y help diff --git a/drivers/platform/mips/cpu_hwmon.c b/drivers/platform/mips/cpu_hwmon.c index a7f184bb47e0..1833b51690e5 100644 --- a/drivers/platform/mips/cpu_hwmon.c +++ b/drivers/platform/mips/cpu_hwmon.c @@ -9,6 +9,9 @@ #include <loongson.h> #include <boot_param.h> #include <loongson_hwmon.h> +#include <loongson_regs.h> + +static int csr_temp_enable = 0; /* * Loongson-3 series cpu has two sensors inside, @@ -20,8 +23,14 @@ int loongson3_cpu_temp(int cpu) { u32 reg, prid_rev; + if (csr_temp_enable) { + reg = (csr_readl(LOONGSON_CSR_CPUTEMP) & 0xff); + goto out; + } + reg = LOONGSON_CHIPTEMP(cpu); prid_rev = read_c0_prid() & PRID_REV_MASK; + switch (prid_rev) { case PRID_REV_LOONGSON3A_R1: reg = (reg >> 8) & 0xff; @@ -34,9 +43,12 @@ int loongson3_cpu_temp(int cpu) break; case PRID_REV_LOONGSON3A_R3_0: case PRID_REV_LOONGSON3A_R3_1: + default: reg = (reg & 0xffff)*731/0x4000 - 273; break; } + +out: return (int)reg * 1000; } @@ -159,6 +171,9 @@ static int __init loongson_hwmon_init(void) pr_info("Loongson Hwmon Enter...\n"); + if (cpu_has_csr()) + csr_temp_enable = csr_readl(LOONGSON_CSR_FEATURES) & LOONGSON_CSRF_TEMP; + cpu_hwmon_dev = hwmon_device_register(NULL); if (IS_ERR(cpu_hwmon_dev)) { ret = -ENOMEM; diff --git a/include/drm/drm_cache.h b/include/drm/drm_cache.h index 987ff16b9420..e9ad4863d915 100644 --- a/include/drm/drm_cache.h +++ b/include/drm/drm_cache.h @@ -45,7 +45,7 @@ static inline bool drm_arch_can_wc_memory(void) { #if defined(CONFIG_PPC) && !defined(CONFIG_NOT_COHERENT_CACHE) return false; -#elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON3) +#elif defined(CONFIG_MIPS) && defined(CONFIG_CPU_LOONGSON64) return false; #elif defined(CONFIG_ARM) || defined(CONFIG_ARM64) /* diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h index 8f8be5b00060..02dc4aa992b2 100644 --- a/include/linux/nvmem-consumer.h +++ b/include/linux/nvmem-consumer.h @@ -89,6 +89,9 @@ void nvmem_del_cell_lookups(struct nvmem_cell_lookup *entries, int nvmem_register_notifier(struct notifier_block *nb); int nvmem_unregister_notifier(struct notifier_block *nb); +struct nvmem_device *nvmem_device_find(void *data, + int (*match)(struct device *dev, const void *data)); + #else static inline struct nvmem_cell *nvmem_cell_get(struct device *dev, @@ -204,6 +207,12 @@ static inline int nvmem_unregister_notifier(struct notifier_block *nb) return -EOPNOTSUPP; } +static inline struct nvmem_device *nvmem_device_find(void *data, + int (*match)(struct device *dev, const void *data)) +{ + return NULL; +} + #endif /* CONFIG_NVMEM */ #if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF) |