summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt38
-rw-r--r--arch/arm/boot/dts/armada-385-linksys.dtsi2
-rw-r--r--arch/arm/boot/dts/meson8.dtsi57
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi12
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts1
-rw-r--r--arch/arm/boot/dts/r8a7791-porter.dts14
-rw-r--r--arch/arm/boot/dts/r8a7791.dtsi5
-rw-r--r--arch/arm/configs/u8500_defconfig3
-rw-r--r--arch/arm/mach-omap1/id.c1
-rw-r--r--arch/arm/mach-omap2/id.c1
-rw-r--r--arch/arm/mach-pxa/devices.c1
-rw-r--r--arch/arm/mach-sa1100/Kconfig10
-rw-r--r--arch/arm/mach-shmobile/timer.c28
-rw-r--r--arch/arm/mach-uniphier/platsmp.c2
-rw-r--r--arch/arm64/boot/dts/broadcom/vulcan.dtsi15
-rw-r--r--drivers/bus/mvebu-mbus.c2
-rw-r--r--drivers/bus/uniphier-system-bus.c2
-rw-r--r--drivers/soc/mediatek/mtk-scpsys.c11
18 files changed, 88 insertions, 117 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
index 3f6a524cc5ff..32f4a2d6d0b3 100644
--- a/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt
@@ -1,13 +1,16 @@
== Amlogic Meson pinmux controller ==
Required properties for the root node:
- - compatible: "amlogic,meson8-pinctrl" or "amlogic,meson8b-pinctrl"
+ - compatible: one of "amlogic,meson8-cbus-pinctrl"
+ "amlogic,meson8b-cbus-pinctrl"
+ "amlogic,meson8-aobus-pinctrl"
+ "amlogic,meson8b-aobus-pinctrl"
- reg: address and size of registers controlling irq functionality
=== GPIO sub-nodes ===
-The 2 power domains of the controller (regular and always-on) are
-represented as sub-nodes and each of them acts as a GPIO controller.
+The GPIO bank for the controller is represented as a sub-node and it acts as a
+GPIO controller.
Required properties for sub-nodes are:
- reg: should contain address and size for mux, pull-enable, pull and
@@ -18,10 +21,6 @@ Required properties for sub-nodes are:
- gpio-controller: identifies the node as a gpio controller
- #gpio-cells: must be 2
-Valid sub-node names are:
- - "banks" for the regular domain
- - "ao-bank" for the always-on domain
-
=== Other sub-nodes ===
Child nodes without the "gpio-controller" represent some desired
@@ -45,7 +44,7 @@ pinctrl-bindings.txt
=== Example ===
pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-pinctrl";
+ compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -61,15 +60,6 @@ pinctrl-bindings.txt
#gpio-cells = <2>;
};
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
nand {
mux {
groups = "nand_io", "nand_io_ce0", "nand_io_ce1",
@@ -79,18 +69,4 @@ pinctrl-bindings.txt
function = "nand";
};
};
-
- uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a",
- "uart_cts_ao_a", "uart_rts_ao_a";
- function = "uart_ao";
- };
-
- conf {
- pins = "GPIOAO_0", "GPIOAO_1",
- "GPIOAO_2", "GPIOAO_3";
- bias-disable;
- };
- };
};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 3710755c6d76..85d2c377c332 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -117,7 +117,7 @@
};
/* USB part of the eSATA/USB 2.0 port */
- usb@50000 {
+ usb@58000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index a2ddcb8c545a..45619f6162c5 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -91,8 +91,8 @@
clock-frequency = <141666666>;
};
- pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8-pinctrl";
+ pinctrl_cbus: pinctrl@c1109880 {
+ compatible = "amlogic,meson8-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -108,29 +108,6 @@
#gpio-cells = <2>;
};
- gpio_ao: ao-bank@c1108030 {
- reg = <0xc8100014 0x4>,
- <0xc810002c 0x4>,
- <0xc8100024 0x8>;
- reg-names = "mux", "pull", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- uart_ao_a_pins: uart_ao_a {
- mux {
- groups = "uart_tx_ao_a", "uart_rx_ao_a";
- function = "uart_ao";
- };
- };
-
- i2c_ao_pins: i2c_mst_ao {
- mux {
- groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
- function = "i2c_mst_ao";
- };
- };
-
spi_nor_pins: nor {
mux {
groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -157,4 +134,34 @@
};
};
+ pinctrl_aobus: pinctrl@c8100084 {
+ compatible = "amlogic,meson8-aobus-pinctrl";
+ reg = <0xc8100084 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio_ao: ao-bank@c1108030 {
+ reg = <0xc8100014 0x4>,
+ <0xc810002c 0x4>,
+ <0xc8100024 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ uart_ao_a_pins: uart_ao_a {
+ mux {
+ groups = "uart_tx_ao_a", "uart_rx_ao_a";
+ function = "uart_ao";
+ };
+ };
+
+ i2c_ao_pins: i2c_mst_ao {
+ mux {
+ groups = "i2c_mst_sck_ao", "i2c_mst_sda_ao";
+ function = "i2c_mst_ao";
+ };
+ };
+ };
}; /* end of / */
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 8bad5571af46..2bfe401a4da9 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -155,8 +155,8 @@
reg = <0xc1108000 0x4>, <0xc1104000 0x460>;
};
- pinctrl: pinctrl@c1109880 {
- compatible = "amlogic,meson8b-pinctrl";
+ pinctrl_cbus: pinctrl@c1109880 {
+ compatible = "amlogic,meson8b-cbus-pinctrl";
reg = <0xc1109880 0x10>;
#address-cells = <1>;
#size-cells = <1>;
@@ -171,6 +171,14 @@
gpio-controller;
#gpio-cells = <2>;
};
+ };
+
+ pinctrl_aobus: pinctrl@c8100084 {
+ compatible = "amlogic,meson8b-aobus-pinctrl";
+ reg = <0xc8100084 0xc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
gpio_ao: ao-bank@c1108030 {
reg = <0xc8100014 0x4>,
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 0ad71b81d3a2..cc6e28f81fe4 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -661,6 +661,7 @@
};
&pcie_bus_clk {
+ clock-frequency = <100000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 6c08314427d6..a9285d9a57cd 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -143,19 +143,11 @@
};
&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
};
- scif_clk_pins: scif_clk {
- renesas,groups = "scif_clk";
- renesas,function = "scif_clk";
- };
-
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -229,11 +221,6 @@
status = "okay";
};
-&scif_clk {
- clock-frequency = <14745600>;
- status = "okay";
-};
-
&ether {
pinctrl-0 = <&ether_pins &phy1_pins>;
pinctrl-names = "default";
@@ -414,6 +401,7 @@
};
&pcie_bus_clk {
+ clock-frequency = <100000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6439f0569fe2..1cd1b6a3a72a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1083,9 +1083,8 @@
pcie_bus_clk: pcie_bus_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <100000000>;
+ clock-frequency = <0>;
clock-output-names = "pcie_bus";
- status = "disabled";
};
/* External SCIF clock */
@@ -1094,7 +1093,6 @@
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
- status = "disabled";
};
/* External USB clock - can be overridden by the board */
@@ -1112,7 +1110,6 @@
/* This value must be overridden by the board. */
clock-frequency = <0>;
clock-output-names = "can_clk";
- status = "disabled";
};
/* Special CPG clocks */
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 07055eacbb0f..a691d590fbd1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -63,6 +63,9 @@ CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AB8500_PONKEY=y
+CONFIG_RMI4_CORE=y
+CONFIG_RMI4_I2C=y
+CONFIG_RMI4_F11=y
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index bfabc065d331..52de382fc804 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -65,7 +65,6 @@ static struct omap_id omap_ids[] __initdata = {
unsigned int omap_rev(void)
{
- WARN_ON_ONCE(!omap_revision || omap_revision == -1);
return omap_revision;
}
EXPORT_SYMBOL(omap_rev);
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index b2f56684c337..2abd53ae3e7a 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -46,7 +46,6 @@ u32 omap_features;
unsigned int omap_rev(void)
{
- WARN_ON_ONCE(!omap_revision || omap_revision == -1);
return omap_revision;
}
EXPORT_SYMBOL(omap_rev);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 913a319c7b00..fffb697bbf0e 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1235,5 +1235,6 @@ static struct platform_device pxa2xx_pxa_dma = {
void __init pxa2xx_set_dmac_info(int nb_channels, int nb_requestors)
{
pxa_dma_pdata.dma_channels = nb_channels;
+ pxa_dma_pdata.nb_requestors = nb_requestors;
pxa_register_device(&pxa2xx_pxa_dma, &pxa_dma_pdata);
}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index c6f6ed1cbed0..36e3c79f4973 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -61,10 +61,7 @@ config SA1100_H3100
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
- H3100 handheld computer. Information about this machine and the
- Linux port to this machine can be found at:
-
- <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
+ H3100 handheld computer.
config SA1100_H3600
bool "Compaq iPAQ H3600/H3700"
@@ -73,10 +70,7 @@ config SA1100_H3600
select MFD_IPAQ_MICRO
help
Say Y here if you intend to run this kernel on the Compaq iPAQ
- H3600 handheld computer. Information about this machine and the
- Linux port to this machine can be found at:
-
- <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
+ H3600 and H3700 handheld computers.
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index ad008e4b0c49..67d79f9c6bad 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
void __init shmobile_init_delay(void)
{
struct device_node *np, *cpus;
- bool is_a7_a8_a9 = false;
- bool is_a15 = false;
+ unsigned int div = 0;
bool has_arch_timer = false;
u32 max_freq = 0;
@@ -55,27 +54,22 @@ void __init shmobile_init_delay(void)
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
- if (of_device_is_compatible(np, "arm,cortex-a8") ||
- of_device_is_compatible(np, "arm,cortex-a9")) {
- is_a7_a8_a9 = true;
- } else if (of_device_is_compatible(np, "arm,cortex-a7")) {
- is_a7_a8_a9 = true;
- has_arch_timer = true;
- } else if (of_device_is_compatible(np, "arm,cortex-a15")) {
- is_a15 = true;
+ if (of_device_is_compatible(np, "arm,cortex-a8")) {
+ div = 2;
+ } else if (of_device_is_compatible(np, "arm,cortex-a9")) {
+ div = 1;
+ } else if (of_device_is_compatible(np, "arm,cortex-a7") ||
+ of_device_is_compatible(np, "arm,cortex-a15")) {
+ div = 1;
has_arch_timer = true;
}
}
of_node_put(cpus);
- if (!max_freq)
+ if (!max_freq || !div)
return;
- if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
- if (is_a7_a8_a9)
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (is_a15)
- shmobile_setup_delay_hz(max_freq, 2, 4);
- }
+ if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 1, div);
}
diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c
index 69141357afe8..db04142f88bc 100644
--- a/arch/arm/mach-uniphier/platsmp.c
+++ b/arch/arm/mach-uniphier/platsmp.c
@@ -120,7 +120,7 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
if (ret)
return ret;
- uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, sizeof(SZ_4));
+ uniphier_smp_rom_boot_rsv2 = ioremap(rom_rsv2_phys, SZ_4);
if (!uniphier_smp_rom_boot_rsv2) {
pr_err("failed to map ROM_BOOT_RSV2 register\n");
return -ENOMEM;
diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
index c49b5a85809c..85820e2bca9d 100644
--- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi
+++ b/arch/arm64/boot/dts/broadcom/vulcan.dtsi
@@ -108,12 +108,15 @@
reg = <0x0 0x30000000 0x0 0x10000000>;
reg-names = "PCI ECAM";
- /* IO 0x4000_0000 - 0x4001_0000 */
- ranges = <0x01000000 0 0x40000000 0 0x40000000 0 0x00010000
- /* MEM 0x4800_0000 - 0x5000_0000 */
- 0x02000000 0 0x48000000 0 0x48000000 0 0x08000000
- /* MEM64 pref 0x6_0000_0000 - 0x7_0000_0000 */
- 0x43000000 6 0x00000000 6 0x00000000 1 0x00000000>;
+ /*
+ * PCI ranges:
+ * IO no supported
+ * MEM 0x4000_0000 - 0x6000_0000
+ * MEM64 pref 0x40_0000_0000 - 0x60_0000_0000
+ */
+ ranges =
+ <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000
+ 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map =
/* addr pin ic icaddr icintr */
diff --git a/drivers/bus/mvebu-mbus.c b/drivers/bus/mvebu-mbus.c
index c2e52864bb03..ce54a0160faa 100644
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -972,7 +972,7 @@ int mvebu_mbus_get_dram_win_info(phys_addr_t phyaddr, u8 *target, u8 *attr)
}
}
- pr_err("invalid dram address 0x%x\n", phyaddr);
+ pr_err("invalid dram address %pa\n", &phyaddr);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(mvebu_mbus_get_dram_win_info);
diff --git a/drivers/bus/uniphier-system-bus.c b/drivers/bus/uniphier-system-bus.c
index 834a2aeaf27a..350b7309c26d 100644
--- a/drivers/bus/uniphier-system-bus.c
+++ b/drivers/bus/uniphier-system-bus.c
@@ -108,7 +108,7 @@ static int uniphier_system_bus_check_overlap(
for (i = 0; i < ARRAY_SIZE(priv->bank); i++) {
for (j = i + 1; j < ARRAY_SIZE(priv->bank); j++) {
- if (priv->bank[i].end > priv->bank[j].base ||
+ if (priv->bank[i].end > priv->bank[j].base &&
priv->bank[i].base < priv->bank[j].end) {
dev_err(priv->dev,
"region overlap between bank%d and bank%d\n",
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 57e781c71e67..837effe19907 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -491,13 +491,14 @@ static int scpsys_probe(struct platform_device *pdev)
genpd->dev_ops.active_wakeup = scpsys_active_wakeup;
/*
- * With CONFIG_PM disabled turn on all domains to make the
- * hardware usable.
+ * Initially turn on all domains to make the domains usable
+ * with !CONFIG_PM and to get the hardware in sync with the
+ * software. The unused domains will be switched off during
+ * late_init time.
*/
- if (!IS_ENABLED(CONFIG_PM))
- genpd->power_on(genpd);
+ genpd->power_on(genpd);
- pm_genpd_init(genpd, NULL, true);
+ pm_genpd_init(genpd, NULL, false);
}
/*
generated by cgit (git 2.34.1) at 2025-05-06 00:18:14 +0000