summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/net/marvell,prestera.txt4
-rw-r--r--MAINTAINERS262
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/Kconfig.debug9
-rw-r--r--arch/arm/mach-at91/pm.c9
-rw-r--r--arch/arm/mach-imx/anatop.c20
-rw-r--r--arch/arm/mach-imx/cpu.c3
-rw-r--r--arch/arm/mach-imx/mmdc.c14
-rw-r--r--arch/arm/mach-imx/mxc.h7
-rw-r--r--arch/arm/mach-imx/pm-imx6.c29
-rw-r--r--arch/arm/mach-mvebu/board-v7.c14
-rw-r--r--arch/arm/mach-omap1/ams-delta-fiq-handler.S12
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c161
-rw-r--r--arch/arm/mach-omap1/include/mach/board-ams-delta.h7
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c88
-rw-r--r--arch/arm/mach-shmobile/Kconfig10
-rw-r--r--arch/arm/mach-shmobile/headsmp-scu.S13
-rw-r--r--arch/arm/mach-shmobile/headsmp.S7
-rw-r--r--arch/arm/mach-shmobile/platsmp-scu.c5
-rw-r--r--arch/arm/mach-shmobile/platsmp.c5
-rw-r--r--arch/arm/mach-shmobile/pm-rcar-gen2.c5
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.c7
-rw-r--r--arch/arm/mach-shmobile/pm-rmobile.h7
-rw-r--r--arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c139
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7779.c2
-rw-r--r--arch/arm/mach-shmobile/setup-rcar-gen2.c2
-rw-r--r--arch/arm/mach-shmobile/smp-sh73a0.c10
-rw-r--r--arch/arm/mach-shmobile/suspend.c5
-rw-r--r--arch/arm/mach-shmobile/timer.c10
-rw-r--r--arch/arm/mach-u300/Kconfig13
-rw-r--r--arch/arm/mach-u300/Makefile1
-rw-r--r--arch/arm/mach-u300/dummyspichip.c276
-rw-r--r--arch/arm/mach-zynq/slcr.c2
-rw-r--r--arch/arm/plat-samsung/Kconfig2
-rw-r--r--arch/arm64/Kconfig.platforms60
-rw-r--r--include/linux/platform_data/gpio-omap.h5
36 files changed, 567 insertions, 659 deletions
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index c329608fa887..83370ebf5b89 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -2,7 +2,7 @@ Marvell Prestera Switch Chip bindings
-------------------------------------
Required properties:
-- compatible: one of the following
+- compatible: must be "marvell,prestera" and one of the following
"marvell,prestera-98dx3236",
"marvell,prestera-98dx3336",
"marvell,prestera-98dx4251",
@@ -21,7 +21,7 @@ switch {
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
packet-processor@0 {
- compatible = "marvell,prestera-98dx3236";
+ compatible = "marvell,prestera-98dx3236", "marvell,prestera";
reg = <0 0x4000000>;
interrupts = <33>, <34>, <35>;
dfx = <&dfx>;
diff --git a/MAINTAINERS b/MAINTAINERS
index 85365afe3059..930241eb6e2d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1087,6 +1087,29 @@ F: arch/arm/include/asm/arch_timer.h
F: arch/arm64/include/asm/arch_timer.h
F: drivers/clocksource/arm_arch_timer.c
+ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
+M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/arm/arm-boards
+F: Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
+F: Documentation/devicetree/bindings/clock/arm-integrator.txt
+F: Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
+F: Documentation/devicetree/bindings/mtd/arm-versatile.txt
+F: arch/arm/mach-integrator/
+F: arch/arm/mach-realview/
+F: arch/arm/mach-versatile/
+F: arch/arm/plat-versatile/
+F: arch/arm/boot/dts/arm-realview-*
+F: arch/arm/boot/dts/integrator*
+F: arch/arm/boot/dts/versatile*
+F: drivers/clk/versatile/
+F: drivers/i2c/busses/i2c-versatile.c
+F: drivers/irqchip/irq-versatile-fpga.c
+F: drivers/mtd/maps/physmap_of_versatile.c
+F: drivers/power/reset/arm-versatile-reboot.c
+F: drivers/soc/versatile/
+
ARM HDLCD DRM DRIVER
M: Liviu Dudau <liviu.dudau@arm.com>
S: Supported
@@ -1159,12 +1182,26 @@ S: Odd Fixes
F: drivers/mmc/host/mmci.*
F: include/linux/amba/mmci.h
+ARM PRIMECELL SSP PL022 SPI DRIVER
+M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/spi/spi_pl022.txt
+F: drivers/spi/spi-pl022.c
+
ARM PRIMECELL UART PL010 AND PL011 DRIVERS
M: Russell King <linux@armlinux.org.uk>
S: Odd Fixes
F: drivers/tty/serial/amba-pl01*.c
F: include/linux/amba/serial.h
+ARM PRIMECELL VIC PL190/PL192 DRIVER
+M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/interrupt-controller/arm,vic.txt
+F: drivers/irqchip/irq-vic.c
+
ARM SMMU DRIVERS
M: Will Deacon <will.deacon@arm.com>
R: Robin Murphy <robin.murphy@arm.com>
@@ -1184,18 +1221,25 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
ARM/ACTIONS SEMI ARCHITECTURE
M: Andreas Färber <afaerber@suse.de>
+R: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
N: owl
F: arch/arm/mach-actions/
F: arch/arm/boot/dts/owl-*
F: arch/arm64/boot/dts/actions/
+F: drivers/clk/actions/
F: drivers/clocksource/timer-owl*
+F: drivers/dma/owl-dma.c
+F: drivers/i2c/busses/i2c-owl.c
F: drivers/pinctrl/actions/*
F: drivers/soc/actions/
F: include/dt-bindings/power/owl-*
F: include/linux/soc/actions/
F: Documentation/devicetree/bindings/arm/actions.txt
+F: Documentation/devicetree/bindings/clock/actions,owl-cmu.txt
+F: Documentation/devicetree/bindings/dma/owl-dma.txt
+F: Documentation/devicetree/bindings/i2c/i2c-owl.txt
F: Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
F: Documentation/devicetree/bindings/power/actions,owl-sps.txt
F: Documentation/devicetree/bindings/timer/actions,owl-timer.txt
@@ -1610,12 +1654,10 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/LPC18XX ARCHITECTURE
-M: Joachim Eastwood <manabian@gmail.com>
+M: Vladimir Zapolskiy <vz@mleia.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/boot/dts/lpc43*
-F: drivers/clk/nxp/clk-lpc18xx*
-F: drivers/clocksource/timer-lpc32xx.c
F: drivers/i2c/busses/i2c-lpc2k.c
F: drivers/memory/pl172.c
F: drivers/mtd/spi-nor/nxp-spifi.c
@@ -1714,9 +1756,10 @@ S: Odd Fixes
ARM/Microchip (AT91) SoC support
M: Nicolas Ferre <nicolas.ferre@microchip.com>
M: Alexandre Belloni <alexandre.belloni@bootlin.com>
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.linux4sam.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux.git
S: Supported
N: at91
N: atmel
@@ -2096,22 +2139,24 @@ F: include/linux/remoteproc/st_slim_rproc.h
ARM/STM32 ARCHITECTURE
M: Maxime Coquelin <mcoquelin.stm32@gmail.com>
M: Alexandre Torgue <alexandre.torgue@st.com>
+L: linux-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers)
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
N: stm32
+N: stm
F: arch/arm/boot/dts/stm32*
F: arch/arm/mach-stm32/
F: drivers/clocksource/armv7m_systick.c
-ARM/Synaptics Berlin SoC support
+ARM/Synaptics SoC support
M: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-berlin/
F: arch/arm/boot/dts/berlin*
-F: arch/arm64/boot/dts/marvell/berlin*
+F: arch/arm64/boot/dts/synaptics/
ARM/TANGO ARCHITECTURE
M: Marc Gonzalez <marc.w.gonzalez@free.fr>
@@ -2275,7 +2320,6 @@ F: arch/arm/mach-pxa/include/mach/z2.h
ARM/ZTE ARCHITECTURE
M: Jun Nie <jun.nie@linaro.org>
-M: Baoyou Xie <baoyou.xie@linaro.org>
M: Shawn Guo <shawnguo@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -2483,42 +2527,6 @@ F: drivers/atm/
F: include/linux/atm*
F: include/uapi/linux/atm*
-ATMEL AT91 / AT32 MCI DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-S: Maintained
-F: drivers/mmc/host/atmel-mci.c
-
-ATMEL AT91 SAMA5D2-Compatible Shutdown Controller
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-S: Supported
-F: drivers/power/reset/at91-sama5d2_shdwc.c
-
-ATMEL Audio ALSA driver
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-L: alsa-devel@alsa-project.org (moderated for non-subscribers)
-S: Supported
-F: sound/soc/atmel
-
-ATMEL I2C DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-i2c@vger.kernel.org
-S: Supported
-F: drivers/i2c/busses/i2c-at91.c
-
-ATMEL ISI DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-media@vger.kernel.org
-S: Supported
-F: drivers/media/platform/atmel/atmel-isi.c
-F: include/media/atmel-isi.h
-
-ATMEL LCDFB DRIVER
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-L: linux-fbdev@vger.kernel.org
-S: Maintained
-F: drivers/video/fbdev/atmel_lcdfb.c
-F: include/video/atmel_lcdc.h
-
ATMEL MACB ETHERNET DRIVER
M: Nicolas Ferre <nicolas.ferre@microchip.com>
S: Supported
@@ -2531,43 +2539,6 @@ S: Maintained
F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt
F: drivers/input/touchscreen/atmel_mxt_ts.c
-ATMEL SAMA5D2 ADC DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-iio@vger.kernel.org
-S: Supported
-F: drivers/iio/adc/at91-sama5d2_adc.c
-
-ATMEL SDMMC DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-mmc@vger.kernel.org
-S: Supported
-F: drivers/mmc/host/sdhci-of-at91.c
-
-ATMEL SPI DRIVER
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-S: Supported
-F: drivers/spi/spi-atmel.*
-
-ATMEL SSC DRIVER
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
-F: drivers/misc/atmel-ssc.c
-F: include/linux/atmel-ssc.h
-
-ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
-F: drivers/misc/atmel_tclib.c
-F: drivers/clocksource/tcb_clksrc.c
-
-ATMEL USBA UDC DRIVER
-M: Nicolas Ferre <nicolas.ferre@microchip.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
-F: drivers/usb/gadget/udc/atmel_usba_udc.*
-
ATMEL WIRELESS DRIVER
M: Simon Kelley <simon@thekelleys.org.uk>
L: linux-wireless@vger.kernel.org
@@ -2576,13 +2547,6 @@ W: http://atmelwlandriver.sourceforge.net/
S: Maintained
F: drivers/net/wireless/atmel/atmel*
-ATMEL XDMA DRIVER
-M: Ludovic Desroches <ludovic.desroches@microchip.com>
-L: linux-arm-kernel@lists.infradead.org
-L: dmaengine@vger.kernel.org
-S: Supported
-F: drivers/dma/at_xdmac.c
-
ATOMIC INFRASTRUCTURE
M: Will Deacon <will.deacon@arm.com>
M: Peter Zijlstra <peterz@infradead.org>
@@ -8899,7 +8863,7 @@ S: Maintained
F: drivers/net/phy/marvell10g.c
MARVELL MVNETA ETHERNET DRIVER
-M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/mvneta.*
@@ -9624,14 +9588,20 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
F: arch/microblaze/
-MICROCHIP / ATMEL AT91 SERIAL DRIVER
+MICROCHIP AT91 SERIAL DRIVER
M: Richard Genoud <richard.genoud@gmail.com>
S: Maintained
F: drivers/tty/serial/atmel_serial.c
F: drivers/tty/serial/atmel_serial.h
F: Documentation/devicetree/bindings/mfd/atmel-usart.txt
-MICROCHIP / ATMEL DMA DRIVER
+MICROCHIP AUDIO ASOC DRIVERS
+M: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Supported
+F: sound/soc/atmel
+
+MICROCHIP DMA DRIVER
M: Ludovic Desroches <ludovic.desroches@microchip.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: dmaengine@vger.kernel.org
@@ -9639,27 +9609,35 @@ S: Supported
F: drivers/dma/at_hdmac.c
F: drivers/dma/at_hdmac_regs.h
F: include/linux/platform_data/dma-atmel.h
+F: Documentation/devicetree/bindings/dma/atmel-dma.txt
+F: include/dt-bindings/dma/at91.h
-MICROCHIP / ATMEL ECC DRIVER
+MICROCHIP ECC DRIVER
M: Tudor Ambarus <tudor.ambarus@microchip.com>
L: linux-crypto@vger.kernel.org
S: Maintained
F: drivers/crypto/atmel-ecc.*
-MICROCHIP / ATMEL ISC DRIVER
-M: Songjun Wu <songjun.wu@microchip.com>
+MICROCHIP I2C DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+L: linux-i2c@vger.kernel.org
+S: Supported
+F: drivers/i2c/busses/i2c-at91.c
+
+MICROCHIP ISC DRIVER
+M: Eugen Hristev <eugen.hristev@microchip.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/platform/atmel/atmel-isc.c
F: drivers/media/platform/atmel/atmel-isc-regs.h
F: devicetree/bindings/media/atmel-isc.txt
-MICROCHIP / ATMEL NAND DRIVER
-M: Josh Wu <rainyfeeling@outlook.com>
-L: linux-mtd@lists.infradead.org
+MICROCHIP ISI DRIVER
+M: Eugen Hristev <eugen.hristev@microchip.com>
+L: linux-media@vger.kernel.org
S: Supported
-F: drivers/mtd/nand/raw/atmel/*
-F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
+F: drivers/media/platform/atmel/atmel-isi.c
+F: include/media/atmel-isi.h
MICROCHIP AT91 USART MFD DRIVER
M: Radu Pirea <radu_nicolae.pirea@upb.ro>
@@ -9693,7 +9671,19 @@ L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/microchip/lan743x_*
-MICROCHIP / ATMEL MCP3911 ADC DRIVER
+MICROCHIP LCDFB DRIVER
+M: Nicolas Ferre <nicolas.ferre@microchip.com>
+L: linux-fbdev@vger.kernel.org
+S: Maintained
+F: drivers/video/fbdev/atmel_lcdfb.c
+F: include/video/atmel_lcdc.h
+
+MICROCHIP MMC/SD/SDIO MCI DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+S: Maintained
+F: drivers/mmc/host/atmel-mci.c
+
+MICROCHIP MCP3911 ADC DRIVER
M: Marcus Folkesson <marcus.folkesson@gmail.com>
M: Kent Gustavsson <kent@minoris.se>
L: linux-iio@vger.kernel.org
@@ -9701,6 +9691,60 @@ S: Supported
F: drivers/iio/adc/mcp3911.c
F: Documentation/devicetree/bindings/iio/adc/mcp3911.txt
+MICROCHIP NAND DRIVER
+M: Tudor Ambarus <tudor.ambarus@microchip.com>
+L: linux-mtd@lists.infradead.org
+S: Supported
+F: drivers/mtd/nand/raw/atmel/*
+F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
+
+MICROCHIP PWM DRIVER
+M: Claudiu Beznea <claudiu.beznea@microchip.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: linux-pwm@vger.kernel.org
+S: Supported
+F: drivers/pwm/pwm-atmel.c
+F: Documentation/devicetree/bindings/pwm/atmel-pwm.txt
+
+MICROCHIP SAMA5D2-COMPATIBLE ADC DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+M: Eugen Hristev <eugen.hristev@microchip.com>
+L: linux-iio@vger.kernel.org
+S: Supported
+F: drivers/iio/adc/at91-sama5d2_adc.c
+F: Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt
+F: include/dt-bindings/iio/adc/at91-sama5d2_adc.h
+
+MICROCHIP SAMA5D2-COMPATIBLE SHUTDOWN CONTROLLER
+M: Nicolas Ferre <nicolas.ferre@microchip.com>
+S: Supported
+F: drivers/power/reset/at91-sama5d2_shdwc.c
+
+MICROCHIP SPI DRIVER
+M: Nicolas Ferre <nicolas.ferre@microchip.com>
+S: Supported
+F: drivers/spi/spi-atmel.*
+
+MICROCHIP SSC DRIVER
+M: Nicolas Ferre <nicolas.ferre@microchip.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: drivers/misc/atmel-ssc.c
+F: include/linux/atmel-ssc.h
+
+MICROCHIP TIMER COUNTER (TC) AND CLOCKSOURCE DRIVERS
+M: Nicolas Ferre <nicolas.ferre@microchip.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: drivers/misc/atmel_tclib.c
+F: drivers/clocksource/tcb_clksrc.c
+
+MICROCHIP USBA UDC DRIVER
+M: Cristian Birsan <cristian.birsan@microchip.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: drivers/usb/gadget/udc/atmel_usba_udc.*
+
MICROCHIP USB251XB DRIVER
M: Richard Leitner <richard.leitner@skidata.com>
L: linux-usb@vger.kernel.org
@@ -9708,6 +9752,13 @@ S: Maintained
F: drivers/usb/misc/usb251xb.c
F: Documentation/devicetree/bindings/usb/usb251xb.txt
+MICROCHIP XDMA DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+L: linux-arm-kernel@lists.infradead.org
+L: dmaengine@vger.kernel.org
+S: Supported
+F: drivers/dma/at_xdmac.c
+
MICROSEMI MIPS SOCS
M: Alexandre Belloni <alexandre.belloni@bootlin.com>
L: linux-mips@linux-mips.org
@@ -11191,7 +11242,7 @@ S: Maintained
F: drivers/firmware/pcdp.*
PCI DRIVER FOR AARDVARK (Marvell Armada 3700)
-M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -11223,7 +11274,7 @@ F: Documentation/devicetree/bindings/pci/versatile.txt
F: drivers/pci/controller/pci-versatile.c
PCI DRIVER FOR ARMADA 8K
-M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org
S: Maintained
@@ -11292,7 +11343,7 @@ F: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
F: drivers/pci/controller/pcie-mobiveil.c
PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
-M: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+M: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
M: Jason Cooper <jason@lakedaemon.net>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -13203,6 +13254,12 @@ L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-pci-dwc-mshc.c
+SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) MICROCHIP DRIVER
+M: Ludovic Desroches <ludovic.desroches@microchip.com>
+L: linux-mmc@vger.kernel.org
+S: Supported
+F: drivers/mmc/host/sdhci-of-at91.c
+
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
M: Ben Dooks <ben-linux@fluff.org>
M: Jaehoon Chung <jh80.chung@samsung.com>
@@ -14626,7 +14683,6 @@ F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: drivers/firmware/ti_sci*
F: include/linux/soc/ti/ti_sci_protocol.h
F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
-F: include/dt-bindings/genpd/k2g.h
F: drivers/soc/ti/ti_sci_pm_domains.c
F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e8cd55a5b04c..b8c6062ca0c1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -701,6 +701,7 @@ config ARCH_VIRT
select ARM_GIC_V3_ITS if PCI
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
+ select ARCH_SUPPORTS_BIG_ENDIAN
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a810fa8ba404..d6a49f59ecd9 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -947,12 +947,13 @@ choice
config DEBUG_RCAR_GEN2_SCIF0
bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
- depends on ARCH_R8A7743 || ARCH_R8A7790 || ARCH_R8A7791 || \
- ARCH_R8A7792 || ARCH_R8A7793
+ depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
+ ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
- via SCIF0 on Renesas RZ/G1M (R8A7743), R-Car H2 (R8A7790),
- M2-W (R8A7791), V2H (R8A7792), or M2-N (R8A7793).
+ via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
+ R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or
+ M2-N (R8A7793).
config DEBUG_RCAR_GEN2_SCIF1
bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 32fae4dbd63b..51e808adb00c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -143,15 +143,15 @@ static int at91_pm_config_ws(unsigned int pm_mode, bool set)
/* Check if enabled on SHDWC. */
if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
- goto put_node;
+ goto put_device;
mode |= wsi->pmc_fsmr_bit;
if (wsi->set_polarity)
polarity |= wsi->pmc_fsmr_bit;
}
-put_node:
- of_node_put(np);
+put_device:
+ put_device(&pdev->dev);
}
if (mode) {
@@ -580,8 +580,6 @@ static int __init at91_pm_backup_init(void)
if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
return 0;
- pm_bu = NULL;
-
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
if (!np) {
pr_warn("%s: failed to find sfrbu!\n", __func__);
@@ -590,7 +588,6 @@ static int __init at91_pm_backup_init(void)
pm_data.sfrbu = of_iomap(np, 0);
of_node_put(np);
- pm_bu = NULL;
np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
if (!np)
diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 61f3d94f1633..45d618abf26b 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -31,6 +31,8 @@
#define ANADIG_DIGPROG_IMX6SL 0x280
#define ANADIG_DIGPROG_IMX7D 0x800
+#define SRC_SBMR2 0x1c
+
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8
#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
@@ -148,6 +150,24 @@ void __init imx_init_revision_from_anatop(void)
major_part = (digprog >> 8) & 0xf;
minor_part = digprog & 0xf;
revision = ((major_part + 1) << 4) | minor_part;
+
+ if ((digprog >> 16) == MXC_CPU_IMX6ULL) {
+ void __iomem *src_base;
+ u32 sbmr2;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "fsl,imx6ul-src");
+ src_base = of_iomap(np, 0);
+ WARN_ON(!src_base);
+ sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
+ iounmap(src_base);
+
+ /* src_sbmr2 bit 6 is to identify if it is i.MX6ULZ */
+ if (sbmr2 & (1 << 6)) {
+ digprog &= ~(0xff << 16);
+ digprog |= (MXC_CPU_IMX6ULZ << 16);
+ }
+ }
}
mxc_set_cpu_type(digprog >> 16 & 0xff);
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index c6b1bf97a6c1..c73593e09121 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -136,6 +136,9 @@ struct device * __init imx_soc_device_init(void)
case MXC_CPU_IMX6ULL:
soc_id = "i.MX6ULL";
break;
+ case MXC_CPU_IMX6ULZ:
+ soc_id = "i.MX6ULZ";
+ break;
case MXC_CPU_IMX6SLL:
soc_id = "i.MX6SLL";
break;
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index 04b3bf71de94..e49e06834516 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -11,6 +11,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
#include <linux/hrtimer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -546,7 +547,20 @@ static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
void __iomem *mmdc_base, *reg;
+ struct clk *mmdc_ipg_clk;
u32 val;
+ int err;
+
+ /* the ipg clock is optional */
+ mmdc_ipg_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mmdc_ipg_clk))
+ mmdc_ipg_clk = NULL;
+
+ err = clk_prepare_enable(mmdc_ipg_clk);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to enable mmdc ipg clock.\n");
+ return err;
+ }
mmdc_base = of_iomap(np, 0);
WARN_ON(!mmdc_base);
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 026e2ca45f1e..b130a53ff62a 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -40,6 +40,8 @@
#define MXC_CPU_IMX6Q 0x63
#define MXC_CPU_IMX6UL 0x64
#define MXC_CPU_IMX6ULL 0x65
+/* virtual cpu id for i.mx6ulz */
+#define MXC_CPU_IMX6ULZ 0x6b
#define MXC_CPU_IMX6SLL 0x67
#define MXC_CPU_IMX7D 0x72
@@ -80,6 +82,11 @@ static inline bool cpu_is_imx6ull(void)
return __mxc_cpu_type == MXC_CPU_IMX6ULL;
}
+static inline bool cpu_is_imx6ulz(void)
+{
+ return __mxc_cpu_type == MXC_CPU_IMX6ULZ;
+}
+
static inline bool cpu_is_imx6sll(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6SLL;
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index b08e407d8d96..87f45b926c78 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -313,7 +313,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
- cpu_is_imx6ull() || cpu_is_imx6sll())
+ cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -331,7 +331,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
- cpu_is_imx6ull() || cpu_is_imx6sll())
+ cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@@ -618,6 +618,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
IMX6Q_GPR1_GINT);
}
+static void imx6_pm_stby_poweroff(void)
+{
+ imx6_set_lpm(STOP_POWER_OFF);
+ imx6q_suspend_finish(0);
+
+ mdelay(1000);
+
+ pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+ if (pm_power_off) {
+ pr_warn("%s: pm_power_off already claimed %p %pf!\n",
+ __func__, pm_power_off, pm_power_off);
+ return -EBUSY;
+ }
+
+ pm_power_off = imx6_pm_stby_poweroff;
+ return 0;
+}
+
void __init imx6_pm_ccm_init(const char *ccm_compat)
{
struct device_node *np;
@@ -634,6 +656,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_LPM;
writel_relaxed(val, ccm_base + CLPCR);
+
+ if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+ imx6_pm_stby_poweroff_probe();
}
void __init imx6q_pm_init(void)
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
index ccca95173e17..0b10acd7d1b9 100644
--- a/arch/arm/mach-mvebu/board-v7.c
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -145,6 +145,13 @@ static void __init mvebu_dt_init(void)
i2c_quirk();
}
+static void __init armada_370_xp_dt_fixup(void)
+{
+#ifdef CONFIG_SMP
+ smp_set_ops(smp_ops(armada_xp_smp_ops));
+#endif
+}
+
static const char * const armada_370_xp_dt_compat[] __initconst = {
"marvell,armada-370-xp",
NULL,
@@ -153,17 +160,12 @@ static const char * const armada_370_xp_dt_compat[] __initconst = {
DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
-/*
- * The following field (.smp) is still needed to ensure backward
- * compatibility with old Device Trees that were not specifying the
- * cpus enable-method property.
- */
- .smp = smp_ops(armada_xp_smp_ops),
.init_machine = mvebu_dt_init,
.init_irq = mvebu_init_irq,
.restart = mvebu_restart,
.reserve = mvebu_memblock_reserve,
.dt_compat = armada_370_xp_dt_compat,
+ .dt_fixup = armada_370_xp_dt_fixup,
MACHINE_END
static const char * const armada_375_dt_compat[] __initconst = {
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index ddc27638ba2a..e3faa0274b56 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -15,6 +15,7 @@
#include <linux/linkage.h>
#include <linux/platform_data/ams-delta-fiq.h>
+#include <linux/platform_data/gpio-omap.h>
#include <asm/assembler.h>
#include <mach/board-ams-delta.h>
@@ -24,17 +25,10 @@
#include "soc.h"
/*
- * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
- * Unfortunately, those were not placed in a separate header file.
+ * OMAP1510 GPIO related symbol copied from arch/arm/mach-omap1/gpio15xx.c.
+ * Unfortunately, it was not placed in a separate header file.
*/
#define OMAP1510_GPIO_BASE 0xFFFCE000
-#define OMAP1510_GPIO_DATA_INPUT 0x00
-#define OMAP1510_GPIO_DATA_OUTPUT 0x04
-#define OMAP1510_GPIO_DIR_CONTROL 0x08
-#define OMAP1510_GPIO_INT_CONTROL 0x0c
-#define OMAP1510_GPIO_INT_MASK 0x10
-#define OMAP1510_GPIO_INT_STATUS 0x14
-#define OMAP1510_GPIO_PIN_CONTROL 0x18
/* GPIO register bitmasks */
#define KEYBRD_DATA_MASK (0x1 << AMS_DELTA_GPIO_PIN_KEYBRD_DATA)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index f226973f3d8c..af318d958fd2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -250,39 +250,6 @@ static struct platform_device latch2_gpio_device = {
#define LATCH2_PIN_HOOKFLASH1 14
#define LATCH2_PIN_HOOKFLASH2 15
-static const struct gpio latch_gpios[] __initconst = {
- {
- .gpio = LATCH1_GPIO_BASE + 6,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "dockit1",
- },
- {
- .gpio = LATCH1_GPIO_BASE + 7,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "dockit2",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "scard_rstin",
- },
- {
- .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "scard_cmdvcc",
- },
- {
- .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "hookflash1",
- },
- {
- .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
- .flags = GPIOF_OUT_INIT_LOW,
- .label = "hookflash2",
- },
-};
-
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
REGULATOR_SUPPLY("POR", "cx20442-codec"),
@@ -329,20 +296,6 @@ struct modem_private_data {
static struct modem_private_data modem_priv;
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
-{
- int bit = 0;
- u16 bitpos = 1 << bit;
-
- for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
- if (!(mask & bitpos))
- continue;
- else
- gpio_set_value(base + bit, (value & bitpos) != 0);
- }
-}
-EXPORT_SYMBOL(ams_delta_latch_write);
-
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
@@ -638,6 +591,28 @@ static struct gpiod_hog ams_delta_gpio_hogs[] = {
{},
};
+static struct plat_serial8250_port ams_delta_modem_ports[];
+
+/*
+ * Obtain MODEM IRQ GPIO descriptor using its hardware pin
+ * number and assign related IRQ number to the MODEM port.
+ * Keep the GPIO descriptor open so nobody steps in.
+ */
+static void __init modem_assign_irq(struct gpio_chip *chip)
+{
+ struct gpio_desc *gpiod;
+
+ gpiod = gpiochip_request_own_desc(chip, AMS_DELTA_GPIO_PIN_MODEM_IRQ,
+ "modem_irq");
+ if (IS_ERR(gpiod)) {
+ pr_err("%s: modem IRQ GPIO request failed (%ld)\n", __func__,
+ PTR_ERR(gpiod));
+ } else {
+ gpiod_direction_input(gpiod);
+ ams_delta_modem_ports[0].irq = gpiod_to_irq(gpiod);
+ }
+}
+
/*
* The purpose of this function is to take care of proper initialization of
* devices and data structures which depend on GPIO lines provided by OMAP GPIO
@@ -657,7 +632,47 @@ static void __init omap_gpio_deps_init(void)
return;
}
+ /*
+ * Start with FIQ initialization as it may have to request
+ * and release successfully each OMAP GPIO pin in turn.
+ */
ams_delta_init_fiq(chip, &ams_delta_serio_device);
+
+ modem_assign_irq(chip);
+}
+
+/*
+ * Initialize latch2 pins with values which are safe for dependent on-board
+ * devices or useful for their successull initialization even before GPIO
+ * driver takes control over the latch pins:
+ * - LATCH2_PIN_LCD_VBLEN = 0
+ * - LATCH2_PIN_LCD_NDISP = 0 Keep LCD device powered off before its
+ * driver takes control over it.
+ * - LATCH2_PIN_NAND_NCE = 0
+ * - LATCH2_PIN_NAND_NWP = 0 Keep NAND device down and write-
+ * protected before its driver takes
+ * control over it.
+ * - LATCH2_PIN_KEYBRD_PWR = 0 Keep keyboard powered off before serio
+ * driver takes control over it.
+ * - LATCH2_PIN_KEYBRD_DATAOUT = 0 Keep low to avoid corruption of first
+ * byte of data received from attached
+ * keyboard when serio device is probed;
+ * the pin is also hogged low by the latch2
+ * GPIO driver as soon as it is ready.
+ * - LATCH2_PIN_MODEM_NRESET = 1 Enable voice MODEM device, allowing for
+ * its successful probe even before a
+ * regulator it depends on, which in turn
+ * takes control over the pin, is set up.
+ * - LATCH2_PIN_MODEM_CODEC = 1 Attach voice MODEM CODEC data port
+ * to the MODEM so the CODEC is under
+ * control even if audio driver doesn't
+ * take it over.
+ */
+static void __init ams_delta_latch2_init(void)
+{
+ u16 latch2 = 1 << LATCH2_PIN_MODEM_NRESET | 1 << LATCH2_PIN_MODEM_CODEC;
+
+ __raw_writew(latch2, LATCH2_VIRT);
}
static void __init ams_delta_init(void)
@@ -681,6 +696,7 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J18_1610_CAM_D7);
omap_gpio_deps_init();
+ ams_delta_latch2_init();
gpiod_add_hogs(ams_delta_gpio_hogs);
omap_serial_init();
@@ -821,7 +837,6 @@ static void __init ams_delta_led_init(struct gpio_chip *chip)
static int __init ams_delta_gpio_init(void)
{
struct gpio_chip *chip;
- int err;
if (!machine_is_ams_delta())
return -ENODEV;
@@ -832,11 +847,7 @@ static int __init ams_delta_gpio_init(void)
else
ams_delta_led_init(chip);
- err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
- if (err)
- pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
-
- return err;
+ return 0;
}
device_initcall_sync(ams_delta_gpio_init);
@@ -852,33 +863,44 @@ static int __init modem_nreset_init(void)
}
+/*
+ * This function expects MODEM IRQ number already assigned to the port
+ * and fails if it's not.
+ * The MODEM device requires its RESET# pin kept high during probe.
+ * That requirement can be fulfilled in several ways:
+ * - with a descriptor of already functional modem_nreset regulator
+ * assigned to the MODEM private data,
+ * - with the regulator not yet controlled by modem_pm function but
+ * already enabled by default on probe,
+ * - before the modem_nreset regulator is probed, with the pin already
+ * set high explicitly.
+ * The last one is already guaranteed by ams_delta_latch2_init() called
+ * from machine_init.
+ * In order to avoid taking over ttyS0 device slot, the MODEM device
+ * should be registered after OMAP serial ports. Since those ports
+ * are registered at arch_initcall, this function can be called safely
+ * at arch_initcall_sync earliest.
+ */
static int __init ams_delta_modem_init(void)
{
int err;
- omap_cfg_reg(M14_1510_GPIO2);
- ams_delta_modem_ports[0].irq =
- gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ if (!machine_is_ams_delta())
+ return -ENODEV;
- err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
- if (err) {
- pr_err("Couldn't request gpio pin for modem\n");
- return err;
- }
- gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
+ if (ams_delta_modem_ports[0].irq < 0)
+ return ams_delta_modem_ports[0].irq;
+
+ omap_cfg_reg(M14_1510_GPIO2);
/* Initialize the modem_nreset regulator consumer before use */
modem_priv.regulator = ERR_PTR(-ENODEV);
- ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
- AMS_DELTA_LATCH2_MODEM_CODEC);
-
err = platform_device_register(&ams_delta_modem_device);
- if (err)
- gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
+arch_initcall_sync(ams_delta_modem_init);
static int __init late_init(void)
{
@@ -888,10 +910,6 @@ static int __init late_init(void)
if (err)
return err;
- err = ams_delta_modem_init();
- if (err)
- return err;
-
/*
* Once the modem device is registered, the modem_nreset
* regulator can be requested on behalf of that device.
@@ -906,7 +924,6 @@ static int __init late_init(void)
unregister:
platform_device_unregister(&ams_delta_modem_device);
- gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
diff --git a/arch/arm/mach-omap1/include/mach/board-ams-delta.h b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
index ad6f865d1f16..3b2d8019238a 100644
--- a/arch/arm/mach-omap1/include/mach/board-ams-delta.h
+++ b/arch/arm/mach-omap1/include/mach/board-ams-delta.h
@@ -59,13 +59,6 @@
#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN
#define AMS_DELTA_LATCH2_NGPIO 16
-#ifndef __ASSEMBLY__
-void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value);
-#define ams_delta_latch2_write(mask, value) \
- ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \
- AMS_DELTA_LATCH2_NGPIO, (mask), (value))
-#endif
-
#endif /* CONFIG_MACH_AMS_DELTA */
#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index cd65ea4e9c54..56a1fe90d394 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -188,16 +188,16 @@
/**
* struct clkctrl_provider - clkctrl provider mapping data
- * @addr: base address for the provider
- * @size: size of the provider address space
- * @offset: offset of the provider from PRCM instance base
+ * @num_addrs: number of base address ranges for the provider
+ * @addr: base address(es) for the provider
+ * @size: size(s) of the provider address space(s)
* @node: device node associated with the provider
* @link: list link
*/
struct clkctrl_provider {
- u32 addr;
- u32 size;
- u16 offset;
+ int num_addrs;
+ u32 *addr;
+ u32 *size;
struct device_node *node;
struct list_head link;
};
@@ -724,23 +724,34 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
const __be32 *addrp;
struct clkctrl_provider *provider;
u64 size;
+ int i;
provider = memblock_virt_alloc(sizeof(*provider), 0);
if (!provider)
return -ENOMEM;
- addrp = of_get_address(np, 0, &size, NULL);
- provider->addr = (u32)of_translate_address(np, addrp);
- addrp = of_get_address(np->parent, 0, NULL, NULL);
- provider->offset = provider->addr -
- (u32)of_translate_address(np->parent, addrp);
- provider->addr &= ~0xff;
- provider->size = size | 0xff;
provider->node = np;
- pr_debug("%s: %s: %x...%x [+%x]\n", __func__, np->parent->name,
- provider->addr, provider->addr + provider->size,
- provider->offset);
+ provider->num_addrs =
+ of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2;
+
+ provider->addr =
+ memblock_virt_alloc(sizeof(void *) * provider->num_addrs, 0);
+ if (!provider->addr)
+ return -ENOMEM;
+
+ provider->size =
+ memblock_virt_alloc(sizeof(u32) * provider->num_addrs, 0);
+ if (!provider->size)
+ return -ENOMEM;
+
+ for (i = 0; i < provider->num_addrs; i++) {
+ addrp = of_get_address(np, i, &size, NULL);
+ provider->addr[i] = (u32)of_translate_address(np, addrp);
+ provider->size[i] = size;
+ pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i],
+ provider->addr[i] + provider->size[i]);
+ }
list_add(&provider->link, &clkctrl_providers);
@@ -787,23 +798,26 @@ static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh)
pr_debug("%s: %s: addr=%x\n", __func__, oh->name, addr);
list_for_each_entry(provider, &clkctrl_providers, link) {
- if (provider->addr <= addr &&
- provider->addr + provider->size >= addr) {
- struct of_phandle_args clkspec;
+ int i;
- clkspec.np = provider->node;
- clkspec.args_count = 2;
- clkspec.args[0] = addr - provider->addr -
- provider->offset;
- clkspec.args[1] = 0;
+ for (i = 0; i < provider->num_addrs; i++) {
+ if (provider->addr[i] <= addr &&
+ provider->addr[i] + provider->size[i] > addr) {
+ struct of_phandle_args clkspec;
- clk = of_clk_get_from_provider(&clkspec);
+ clkspec.np = provider->node;
+ clkspec.args_count = 2;
+ clkspec.args[0] = addr - provider->addr[0];
+ clkspec.args[1] = 0;
- pr_debug("%s: %s got %p (offset=%x, provider=%s)\n",
- __func__, oh->name, clk, clkspec.args[0],
- provider->node->parent->name);
+ clk = of_clk_get_from_provider(&clkspec);
- return clk;
+ pr_debug("%s: %s got %p (offset=%x, provider=%pOF)\n",
+ __func__, oh->name, clk,
+ clkspec.args[0], provider->node);
+
+ return clk;
+ }
}
}
@@ -2107,8 +2121,8 @@ static int of_dev_find_hwmod(struct device_node *np,
if (res)
continue;
if (!strcmp(p, oh->name)) {
- pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
- np->name, i, oh->name);
+ pr_debug("omap_hwmod: dt %pOFn[%i] uses hwmod %s\n",
+ np, i, oh->name);
return i;
}
}
@@ -2241,8 +2255,8 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
return -ENOENT;
if (nr_addr != 1 || nr_size != 1) {
- pr_err("%s: invalid range for %s->%s\n", __func__,
- oh->name, np->name);
+ pr_err("%s: invalid range for %s->%pOFn\n", __func__,
+ oh->name, np);
return -EINVAL;
}
@@ -2250,8 +2264,8 @@ int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
base = of_translate_address(np, ranges++);
size = be32_to_cpup(ranges);
- pr_debug("omap_hwmod: %s %s at 0x%llx size 0x%llx\n",
- oh ? oh->name : "", np->name, base, size);
+ pr_debug("omap_hwmod: %s %pOFn at 0x%llx size 0x%llx\n",
+ oh->name, np, base, size);
if (oh && oh->mpu_rt_idx) {
omap_hwmod_fix_mpu_rt_idx(oh, np, res);
@@ -2359,8 +2373,8 @@ static int __init _init(struct omap_hwmod *oh, void *data)
if (r)
pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
else if (np && index)
- pr_warn("omap_hwmod: %s using broken dt data from %s\n",
- oh->name, np->name);
+ pr_warn("omap_hwmod: %s using broken dt data from %pOFn\n",
+ oh->name, np);
r = _init_mpu_rt_base(oh, NULL, index, np);
if (r < 0) {
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 94e9431d92b8..b100c26a858f 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,6 +1,4 @@
-config ARCH_SHMOBILE
- bool
-
+# SPDX-License-Identifier: GPL-2.0
config PM_RMOBILE
bool
select PM
@@ -30,7 +28,6 @@ config ARCH_RMOBILE
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7 && MMU
- select ARCH_SHMOBILE
select ARM_GIC
select GPIOLIB
select HAVE_ARM_SCU if SMP
@@ -78,6 +75,11 @@ config ARCH_R8A7743
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
+config ARCH_R8A7744
+ bool "RZ/G1N (R8A77440)"
+ select ARCH_RCAR_GEN2
+ select ARM_ERRATA_798181 if SMP
+
config ARCH_R8A7745
bool "RZ/G1E (R8A77450)"
select ARCH_RCAR_GEN2
diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S
index 936d7011c314..d0234296ae62 100644
--- a/arch/arm/mach-shmobile/headsmp-scu.S
+++ b/arch/arm/mach-shmobile/headsmp-scu.S
@@ -1,17 +1,8 @@
-/*
+/* SPDX-License-Identifier: GPL-2.0+
+ *
* Shared SCU setup for mach-shmobile
*
* Copyright (C) 2012 Bastian Hecht
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
index cef8e8c555f8..9466ae61f56a 100644
--- a/arch/arm/mach-shmobile/headsmp.S
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -1,14 +1,11 @@
-/*
+/* SPDX-License-Identifier: GPL-2.0
+ *
* SMP support for R-Mobile / SH-Mobile
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2010 Takashi Yoshii
*
* Based on vexpress, Copyright (c) 2003 ARM Limited, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/linkage.h>
diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c
index f1a1efde4beb..fcfcef1d1ae4 100644
--- a/arch/arm/mach-shmobile/platsmp-scu.c
+++ b/arch/arm/mach-shmobile/platsmp-scu.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SMP support for SoCs with SCU covered by mach-shmobile
*
* Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/cpu.h>
#include <linux/delay.h>
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index b23378f3d7e1..7437c01513f6 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SMP support for R-Mobile / SH-Mobile
*
@@ -5,10 +6,6 @@
* Copyright (C) 2011 Paul Mundt
*
* Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <asm/cacheflush.h>
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 7efe95bd584f..8c2a20591524 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -1,13 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* R-Car Generation 2 Power management support
*
* Copyright (C) 2013 - 2015 Renesas Electronics Corporation
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/kernel.h>
diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c
index 94fdeef11b81..c6a11b5ec6db 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.c
+++ b/arch/arm/mach-shmobile/pm-rmobile.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* rmobile power management support
*
@@ -7,10 +8,6 @@
*
* based on pm-sh7372.c
* Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/clk/renesas.h>
#include <linux/console.h>
@@ -189,7 +186,7 @@ static void __init add_special_pd(struct device_node *np, enum pd_types type)
return;
}
- pr_debug("Special PM domain %s type %d for %pOF\n", pd->name, type, np);
+ pr_debug("Special PM domain %pOFn type %d for %pOF\n", pd, type, np);
special_pds[num_special_pds].pd = pd;
special_pds[num_special_pds].type = type;
diff --git a/arch/arm/mach-shmobile/pm-rmobile.h b/arch/arm/mach-shmobile/pm-rmobile.h
index 8146bb6d7237..69f839259b09 100644
--- a/arch/arm/mach-shmobile/pm-rmobile.h
+++ b/arch/arm/mach-shmobile/pm-rmobile.h
@@ -1,11 +1,8 @@
-/*
+/* SPDX-License-Identifier: GPL-2.0
+ *
* Copyright (C) 2012 Renesas Solutions Corp.
*
* Kuninori Morimoto <morimoto.kuninori@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#ifndef PM_RMOBILE_H
#define PM_RMOBILE_H
diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
index 21ebc7678ffd..8e50daa99151 100644
--- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
@@ -23,11 +23,12 @@
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/list.h>
#include <linux/notifier.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/mfd/da9063/registers.h>
-
#define IRQC_BASE 0xe61c0000
#define IRQC_MONITOR 0x104 /* IRQn Signal Level Monitor Register */
@@ -36,34 +37,45 @@
/* start of DA9210 System Control and Event Registers */
#define DA9210_REG_MASK_A 0x54
+struct regulator_quirk {
+ struct list_head list;
+ const struct of_device_id *id;
+ struct of_phandle_args irq_args;
+ struct i2c_msg i2c_msg;
+ bool shared; /* IRQ line is shared */
+};
+
+static LIST_HEAD(quirk_list);
static void __iomem *irqc;
/* first byte sets the memory pointer, following are consecutive reg values */
static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
-static struct i2c_msg da9xxx_msgs[3] = {
- {
- .addr = 0x58,
- .len = ARRAY_SIZE(da9063_irq_clr),
- .buf = da9063_irq_clr,
- }, {
- .addr = 0x68,
- .len = ARRAY_SIZE(da9210_irq_clr),
- .buf = da9210_irq_clr,
- }, {
- .addr = 0x70,
- .len = ARRAY_SIZE(da9210_irq_clr),
- .buf = da9210_irq_clr,
- },
+static struct i2c_msg da9063_msg = {
+ .len = ARRAY_SIZE(da9063_irq_clr),
+ .buf = da9063_irq_clr,
+};
+
+static struct i2c_msg da9210_msg = {
+ .len = ARRAY_SIZE(da9210_irq_clr),
+ .buf = da9210_irq_clr,
+};
+
+static const struct of_device_id rcar_gen2_quirk_match[] = {
+ { .compatible = "dlg,da9063", .data = &da9063_msg },
+ { .compatible = "dlg,da9210", .data = &da9210_msg },
+ {},
};
static int regulator_quirk_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
+ struct regulator_quirk *pos, *tmp;
struct device *dev = data;
struct i2c_client *client;
static bool done;
+ int ret;
u32 mon;
if (done)
@@ -80,17 +92,20 @@ static int regulator_quirk_notify(struct notifier_block *nb,
client = to_i2c_client(dev);
dev_dbg(dev, "Detected %s\n", client->name);
- if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
- (client->addr == 0x68 && !strcmp(client->name, "da9210")) ||
- (client->addr == 0x70 && !strcmp(client->name, "da9210"))) {
- int ret, len;
+ /*
+ * Send message to all PMICs that share an IRQ line to deassert it.
+ *
+ * WARNING: This works only if all the PMICs are on the same I2C bus.
+ */
+ list_for_each_entry(pos, &quirk_list, list) {
+ if (!pos->shared)
+ continue;
- /* There are two DA9210 on Stout, one on the other boards. */
- len = of_machine_is_compatible("renesas,stout") ? 3 : 2;
+ dev_info(&client->dev, "clearing %s@0x%02x interrupts\n",
+ pos->id->compatible, pos->i2c_msg.addr);
- dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
- ret = i2c_transfer(client->adapter, da9xxx_msgs, len);
- if (ret != len)
+ ret = i2c_transfer(client->adapter, &pos->i2c_msg, 1);
+ if (ret != 1)
dev_err(&client->dev, "i2c error %d\n", ret);
}
@@ -103,6 +118,11 @@ static int regulator_quirk_notify(struct notifier_block *nb,
remove:
dev_info(dev, "IRQ2 is not asserted, removing quirk\n");
+ list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
+ list_del(&pos->list);
+ kfree(pos);
+ }
+
done = true;
iounmap(irqc);
return 0;
@@ -114,7 +134,12 @@ static struct notifier_block regulator_quirk_nb = {
static int __init rcar_gen2_regulator_quirk(void)
{
- u32 mon;
+ struct regulator_quirk *quirk, *pos, *tmp;
+ struct of_phandle_args *argsa, *argsb;
+ const struct of_device_id *id;
+ struct device_node *np;
+ u32 mon, addr;
+ int ret;
if (!of_machine_is_compatible("renesas,koelsch") &&
!of_machine_is_compatible("renesas,lager") &&
@@ -122,22 +147,78 @@ static int __init rcar_gen2_regulator_quirk(void)
!of_machine_is_compatible("renesas,gose"))
return -ENODEV;
+ for_each_matching_node_and_match(np, rcar_gen2_quirk_match, &id) {
+ if (!of_device_is_available(np))
+ break;
+
+ ret = of_property_read_u32(np, "reg", &addr);
+ if (ret) /* Skip invalid entry and continue */
+ continue;
+
+ quirk = kzalloc(sizeof(*quirk), GFP_KERNEL);
+ if (!quirk) {
+ ret = -ENOMEM;
+ goto err_mem;
+ }
+
+ argsa = &quirk->irq_args;
+ memcpy(&quirk->i2c_msg, id->data, sizeof(quirk->i2c_msg));
+
+ quirk->id = id;
+ quirk->i2c_msg.addr = addr;
+
+ ret = of_irq_parse_one(np, 0, argsa);
+ if (ret) { /* Skip invalid entry and continue */
+ kfree(quirk);
+ continue;
+ }
+
+ list_for_each_entry(pos, &quirk_list, list) {
+ argsb = &pos->irq_args;
+
+ if (argsa->args_count != argsb->args_count)
+ continue;
+
+ ret = memcmp(argsa->args, argsb->args,
+ argsa->args_count *
+ sizeof(argsa->args[0]));
+ if (!ret) {
+ pos->shared = true;
+ quirk->shared = true;
+ }
+ }
+
+ list_add_tail(&quirk->list, &quirk_list);
+ }
+
irqc = ioremap(IRQC_BASE, PAGE_SIZE);
- if (!irqc)
- return -ENOMEM;
+ if (!irqc) {
+ ret = -ENOMEM;
+ goto err_mem;
+ }
mon = ioread32(irqc + IRQC_MONITOR);
if (mon & REGULATOR_IRQ_MASK) {
pr_debug("%s: IRQ2 is not asserted, not installing quirk\n",
__func__);
- iounmap(irqc);
- return 0;
+ ret = 0;
+ goto err_free;
}
pr_info("IRQ2 is asserted, installing da9063/da9210 regulator quirk\n");
bus_register_notifier(&i2c_bus_type, &regulator_quirk_nb);
return 0;
+
+err_free:
+ iounmap(irqc);
+err_mem:
+ list_for_each_entry_safe(pos, tmp, &quirk_list, list) {
+ list_del(&pos->list);
+ kfree(pos);
+ }
+
+ return ret;
}
arch_initcall(rcar_gen2_regulator_quirk);
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index d589326099e0..b13ec9088ce5 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -7,9 +7,7 @@
* Copyright (C) 2013 Cogent Embedded, Inc.
*/
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/irqchip.h>
-#include <linux/irqchip/arm-gic.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c
index 013acc97795c..eea60b20c6b4 100644
--- a/arch/arm/mach-shmobile/setup-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c
@@ -25,6 +25,7 @@
static const struct of_device_id cpg_matches[] __initconst = {
{ .compatible = "renesas,rcar-gen2-cpg-clocks", },
{ .compatible = "renesas,r8a7743-cpg-mssr", .data = "extal" },
+ { .compatible = "renesas,r8a7744-cpg-mssr", .data = "extal" },
{ .compatible = "renesas,r8a7790-cpg-mssr", .data = "extal" },
{ .compatible = "renesas,r8a7791-cpg-mssr", .data = "extal" },
{ .compatible = "renesas,r8a7793-cpg-mssr", .data = "extal" },
@@ -193,6 +194,7 @@ MACHINE_END
static const char * const rz_g1_boards_compat_dt[] __initconst = {
"renesas,r8a7743",
+ "renesas,r8a7744",
"renesas,r8a7745",
"renesas,r8a77470",
NULL,
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 41137404382e..9bc543faba96 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SMP support for R-Mobile / SH-Mobile - sh73a0 portion
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2010 Takashi Yoshii
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c
index 74b30bade2c1..3969a499746e 100644
--- a/arch/arm/mach-shmobile/suspend.c
+++ b/arch/arm/mach-shmobile/suspend.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Suspend-to-RAM support code for SH-Mobile ARM
*
* Copyright (C) 2011 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
*/
#include <linux/pm.h>
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index e48b0939693f..2335311b5f36 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -1,17 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* SH-Mobile Timer
*
* Copyright (C) 2010 Magnus Damm
* Copyright (C) 2002 - 2009 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <linux/platform_device.h>
#include <linux/clocksource.h>
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 4f43c1cd5db0..c3c8bf54f033 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -29,17 +29,4 @@ config U300_DEBUG
help
Debug support for U300 in sysfs, procfs etc.
-config MACH_U300_SPIDUMMY
- depends on ARCH_U300
- bool "SSP/SPI dummy chip"
- select SPI
- select SPI_MASTER
- select SPI_PL022
- help
- This creates a small kernel module that creates a dummy
- SPI device to be used for loopback tests. Regularly used
- to test reference designs. If you're not testing SPI,
- you don't need it. Selecting this will activate the
- SPI framework and ARM PL022 support.
-
endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 87d37de054b6..5a8804fa8776 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -4,5 +4,4 @@
obj-y := core.o
-obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
deleted file mode 100644
index 68fe986ca42e..000000000000
--- a/arch/arm/mach-u300/dummyspichip.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * arch/arm/mach-u300/dummyspichip.c
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * This is a dummy loopback SPI "chip" used for testing SPI.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/sysfs.h>
-#include <linux/mutex.h>
-#include <linux/spi/spi.h>
-#include <linux/dma-mapping.h>
-#include <linux/slab.h>
-/*
- * WARNING! Do not include this pl022-specific controller header
- * for any generic driver. It is only done in this dummy chip
- * because we alter the chip configuration in order to test some
- * different settings on the loopback device. Normal chip configs
- * shall be STATIC and not altered by the driver!
- */
-#include <linux/amba/pl022.h>
-
-struct dummy {
- struct device *dev;
- struct mutex lock;
-};
-
-#define DMA_TEST_SIZE 2048
-
-/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
-static ssize_t dummy_looptest(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct spi_device *spi = to_spi_device(dev);
- struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
-
- /*
- * WARNING! Do not dereference the chip-specific data in any normal
- * driver for a chip. It is usually STATIC and shall not be read
- * or written to. Your chip driver should NOT depend on fields in this
- * struct, this is just used here to alter the behaviour of the chip
- * in order to perform tests.
- */
- int status;
- u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
- 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
- 0xF0, 0x0D};
- u8 rxbuf[14];
- u8 *bigtxbuf_virtual;
- u8 *bigrxbuf_virtual;
-
- if (mutex_lock_interruptible(&p_dummy->lock))
- return -ERESTARTSYS;
-
- bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
- if (bigtxbuf_virtual == NULL) {
- status = -ENOMEM;
- goto out;
- }
- bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
-
- /* Fill TXBUF with some happy pattern */
- memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
-
- /*
- * Force chip to 8 bit mode
- * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
- */
- spi->bits_per_word = 8;
- /* You should NOT DO THIS EITHER */
- spi->master->setup(spi);
-
- /* Now run the tests for 8bit mode */
- pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
- "in 8bit mode\n");
- status = spi_w8r8(spi, 0xAA);
- if (status < 0)
- pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
- status);
- else
- pr_info("Simple test 1: SUCCESS!\n");
-
- pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
- "in 8bit mode (full FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
- status);
- else
- pr_info("Simple test 2: SUCCESS!\n");
-
- pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
- "in 8bit mode (see if we overflow FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 3: SUCCESS!\n");
-
- pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
- "bytes garbage with spi_read() in 8bit mode\n");
- status = spi_write(spi, &txbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
- status);
- else
- pr_info("Simple test 4 step 1: SUCCESS!\n");
- status = spi_read(spi, &rxbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
- status);
- else
- pr_info("Simple test 4 step 2: SUCCESS!\n");
-
- pr_info("Simple test 5: write 14 bytes with spi_write(), read "
- "14 bytes garbage with spi_read() in 8bit mode\n");
- status = spi_write(spi, &txbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 5 step 1: SUCCESS!\n");
- status = spi_read(spi, &rxbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 5: SUCCESS!\n");
-
- pr_info("Simple test 6: write %d bytes with spi_write(), "
- "read %d bytes garbage with spi_read() in 8bit mode\n",
- DMA_TEST_SIZE, DMA_TEST_SIZE);
- status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 6 step 1: SUCCESS!\n");
- status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 6: SUCCESS!\n");
-
-
- /*
- * Force chip to 16 bit mode
- * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
- */
- spi->bits_per_word = 16;
- /* You should NOT DO THIS EITHER */
- spi->master->setup(spi);
-
- pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
- "in 16bit bus mode\n");
- status = spi_w8r8(spi, 0xAA);
- if (status == -EIO)
- pr_info("Simple test 7: SUCCESS! (expected failure with "
- "status EIO)\n");
- else if (status < 0)
- pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
- status);
- else
- pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
-
- pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
- "in 16bit mode (full FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
- if (status < 0)
- pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
- status);
- else
- pr_info("Simple test 8: SUCCESS!\n");
-
- pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
- "in 16bit mode (see if we overflow FIFO)\n");
- status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
- if (status < 0)
- pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 9: SUCCESS!\n");
-
- pr_info("Simple test 10: write %d bytes with spi_write(), "
- "read %d bytes garbage with spi_read() in 16bit mode\n",
- DMA_TEST_SIZE, DMA_TEST_SIZE);
- status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 10 step 1: SUCCESS!\n");
-
- status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
- if (status < 0)
- pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
- status);
- else
- pr_info("Simple test 10: SUCCESS!\n");
-
- status = sprintf(buf, "loop test complete\n");
- kfree(bigrxbuf_virtual);
- kfree(bigtxbuf_virtual);
- out:
- mutex_unlock(&p_dummy->lock);
- return status;
-}
-
-static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
-
-static int pl022_dummy_probe(struct spi_device *spi)
-{
- struct dummy *p_dummy;
- int status;
-
- dev_info(&spi->dev, "probing dummy SPI device\n");
-
- p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
- if (!p_dummy)
- return -ENOMEM;
-
- dev_set_drvdata(&spi->dev, p_dummy);
- mutex_init(&p_dummy->lock);
-
- /* sysfs hook */
- status = device_create_file(&spi->dev, &dev_attr_looptest);
- if (status) {
- dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
- goto out_dev_create_looptest_failed;
- }
-
- return 0;
-
-out_dev_create_looptest_failed:
- dev_set_drvdata(&spi->dev, NULL);
- kfree(p_dummy);
- return status;
-}
-
-static int pl022_dummy_remove(struct spi_device *spi)
-{
- struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
-
- dev_info(&spi->dev, "removing dummy SPI device\n");
- device_remove_file(&spi->dev, &dev_attr_looptest);
- dev_set_drvdata(&spi->dev, NULL);
- kfree(p_dummy);
-
- return 0;
-}
-
-static const struct of_device_id pl022_dummy_dt_match[] = {
- { .compatible = "arm,pl022-dummy" },
- {},
-};
-
-static struct spi_driver pl022_dummy_driver = {
- .driver = {
- .name = "spi-dummy",
- .of_match_table = pl022_dummy_dt_match,
- },
- .probe = pl022_dummy_probe,
- .remove = pl022_dummy_remove,
-};
-
-module_spi_driver(pl022_dummy_driver);
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index f0292a30e6f6..10ef99ce1d90 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -233,7 +233,7 @@ int __init zynq_early_slcr_init(void)
register_restart_handler(&zynq_slcr_restart_nb);
- pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
+ pr_info("%pOFn mapped to %p\n", np, zynq_slcr_base);
of_node_put(np);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b600e38364eb..377ff9cda667 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -256,7 +256,7 @@ config S3C_PM_DEBUG_LED_SMDK
config SAMSUNG_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
- depends on PM
+ depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
select CRC32
help
Enable the PM code's memory area checksum over sleep. This option
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 138d8eb58374..51bc479334a4 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -3,6 +3,7 @@ menu "Platform selection"
config ARCH_ACTIONS
bool "Actions Semi Platforms"
select OWL_TIMER
+ select PINCTRL
help
This enables support for the Actions Semiconductor S900 SoC family.
@@ -67,6 +68,7 @@ config ARCH_EXYNOS
select HAVE_S3C_RTC if RTC_CLASS
select PINCTRL
select PINCTRL_EXYNOS
+ select PM_GENERIC_DOMAINS if PM
select SOC_SAMSUNG
help
This enables support for ARMv8 based Samsung Exynos SoC family.
@@ -153,40 +155,30 @@ config ARCH_REALTEK
This enables support for the ARMv8 based Realtek chipsets,
like the RTD1295.
-config ARCH_ROCKCHIP
- bool "Rockchip Platforms"
- select ARCH_HAS_RESET_CONTROLLER
- select GPIOLIB
- select PINCTRL
- select PINCTRL_ROCKCHIP
- select PM
- select ROCKCHIP_TIMER
- help
- This enables support for the ARMv8 based Rockchip chipsets,
- like the RK3368.
-
-config ARCH_SEATTLE
- bool "AMD Seattle SoC Family"
- help
- This enables support for AMD Seattle SOC Family
-
-config ARCH_SHMOBILE
- bool
-
-config ARCH_SYNQUACER
- bool "Socionext SynQuacer SoC Family"
-
config ARCH_RENESAS
bool "Renesas SoC Platforms"
- select ARCH_SHMOBILE
select PINCTRL
select PM
select PM_GENERIC_DOMAINS
select RENESAS_IRQC
select SOC_BUS
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
help
This enables support for the ARMv8 based Renesas SoCs.
+config ARCH_R8A774A1
+ bool "Renesas RZ/G2M SoC Platform"
+ depends on ARCH_RENESAS
+ help
+ This enables support for the Renesas RZ/G2M SoC.
+
+config ARCH_R8A774C0
+ bool "Renesas RZ/G2E SoC Platform"
+ depends on ARCH_RENESAS
+ help
+ This enables support for the Renesas RZ/G2E SoC.
+
config ARCH_R8A7795
bool "Renesas R-Car H3 SoC Platform"
depends on ARCH_RENESAS
@@ -229,11 +221,31 @@ config ARCH_R8A77995
help
This enables support for the Renesas R-Car D3 SoC.
+config ARCH_ROCKCHIP
+ bool "Rockchip Platforms"
+ select ARCH_HAS_RESET_CONTROLLER
+ select GPIOLIB
+ select PINCTRL
+ select PINCTRL_ROCKCHIP
+ select PM
+ select ROCKCHIP_TIMER
+ help
+ This enables support for the ARMv8 based Rockchip chipsets,
+ like the RK3368.
+
+config ARCH_SEATTLE
+ bool "AMD Seattle SoC Family"
+ help
+ This enables support for AMD Seattle SOC Family
+
config ARCH_STRATIX10
bool "Altera's Stratix 10 SoCFPGA Family"
help
This enables support for Altera's Stratix 10 SoCFPGA Family.
+config ARCH_SYNQUACER
+ bool "Socionext SynQuacer SoC Family"
+
config ARCH_TEGRA
bool "NVIDIA Tegra SoC Family"
select ARCH_HAS_RESET_CONTROLLER
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index 8485c6a9a383..6d07eebb3f75 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -24,8 +24,10 @@
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
+#ifndef __ASSEMBLER__
#include <linux/io.h>
#include <linux/platform_device.h>
+#endif
#define OMAP1_MPUIO_BASE 0xfffb5000
@@ -157,6 +159,7 @@
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
+#ifndef __ASSEMBLER__
struct omap_gpio_reg_offs {
u16 revision;
u16 direction;
@@ -205,4 +208,6 @@ struct omap_gpio_platform_data {
int (*get_context_loss_count)(struct device *dev);
};
+#endif /* __ASSEMBLER__ */
+
#endif