summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-mediatek.txt2
-rw-r--r--drivers/pwm/pwm-stm32.c112
-rw-r--r--drivers/pwm/pwm-sun4i.c5
-rw-r--r--include/linux/mfd/stm32-timers.h12
-rw-r--r--include/linux/pwm.h5
5 files changed, 90 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
index 69cae11d80a6..95536d83c5f2 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt
@@ -6,7 +6,7 @@ Required properties:
- "mediatek,mt7622-pwm": found on mt7622 SoC.
- "mediatek,mt7623-pwm": found on mt7623 SoC.
- "mediatek,mt7628-pwm": found on mt7628 SoC.
- - "mediatek,mt7629-pwm", "mediatek,mt7622-pwm": found on mt7629 SoC.
+ - "mediatek,mt7629-pwm": found on mt7629 SoC.
- "mediatek,mt8516-pwm": found on mt8516 SoC.
- reg: physical base address and length of the controller's registers.
- #pwm-cells: must be 2. See pwm.yaml in this directory for a description of
diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c
index 359b08596d9e..7ff48c14fae8 100644
--- a/drivers/pwm/pwm-stm32.c
+++ b/drivers/pwm/pwm-stm32.c
@@ -12,6 +12,7 @@
#include <linux/mfd/stm32-timers.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
@@ -19,6 +20,12 @@
#define CCMR_CHANNEL_MASK 0xFF
#define MAX_BREAKINPUT 2
+struct stm32_breakinput {
+ u32 index;
+ u32 level;
+ u32 filter;
+};
+
struct stm32_pwm {
struct pwm_chip chip;
struct mutex lock; /* protect pwm config/enable */
@@ -26,15 +33,11 @@ struct stm32_pwm {
struct regmap *regmap;
u32 max_arr;
bool have_complementary_output;
+ struct stm32_breakinput breakinputs[MAX_BREAKINPUT];
+ unsigned int num_breakinputs;
u32 capture[4] ____cacheline_aligned; /* DMA'able buffer */
};
-struct stm32_breakinput {
- u32 index;
- u32 level;
- u32 filter;
-};
-
static inline struct stm32_pwm *to_stm32_pwm_dev(struct pwm_chip *chip)
{
return container_of(chip, struct stm32_pwm, chip);
@@ -488,22 +491,19 @@ static const struct pwm_ops stm32pwm_ops = {
};
static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
- int index, int level, int filter)
+ const struct stm32_breakinput *bi)
{
- u32 bke = (index == 0) ? TIM_BDTR_BKE : TIM_BDTR_BK2E;
- int shift = (index == 0) ? TIM_BDTR_BKF_SHIFT : TIM_BDTR_BK2F_SHIFT;
- u32 mask = (index == 0) ? TIM_BDTR_BKE | TIM_BDTR_BKP | TIM_BDTR_BKF
- : TIM_BDTR_BK2E | TIM_BDTR_BK2P | TIM_BDTR_BK2F;
- u32 bdtr = bke;
+ u32 shift = TIM_BDTR_BKF_SHIFT(bi->index);
+ u32 bke = TIM_BDTR_BKE(bi->index);
+ u32 bkp = TIM_BDTR_BKP(bi->index);
+ u32 bkf = TIM_BDTR_BKF(bi->index);
+ u32 mask = bkf | bkp | bke;
+ u32 bdtr;
- /*
- * The both bits could be set since only one will be wrote
- * due to mask value.
- */
- if (level)
- bdtr |= TIM_BDTR_BKP | TIM_BDTR_BK2P;
+ bdtr = (bi->filter & TIM_BDTR_BKF_MASK) << shift | bke;
- bdtr |= (filter & TIM_BDTR_BKF_MASK) << shift;
+ if (bi->level)
+ bdtr |= bkp;
regmap_update_bits(priv->regmap, TIM_BDTR, mask, bdtr);
@@ -512,11 +512,25 @@ static int stm32_pwm_set_breakinput(struct stm32_pwm *priv,
return (bdtr & bke) ? 0 : -EINVAL;
}
-static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
+static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < priv->num_breakinputs; i++) {
+ ret = stm32_pwm_set_breakinput(priv, &priv->breakinputs[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stm32_pwm_probe_breakinputs(struct stm32_pwm *priv,
struct device_node *np)
{
- struct stm32_breakinput breakinput[MAX_BREAKINPUT];
- int nb, ret, i, array_size;
+ int nb, ret, array_size;
+ unsigned int i;
nb = of_property_count_elems_of_size(np, "st,breakinput",
sizeof(struct stm32_breakinput));
@@ -531,20 +545,21 @@ static int stm32_pwm_apply_breakinputs(struct stm32_pwm *priv,
if (nb > MAX_BREAKINPUT)
return -EINVAL;
+ priv->num_breakinputs = nb;
array_size = nb * sizeof(struct stm32_breakinput) / sizeof(u32);
ret = of_property_read_u32_array(np, "st,breakinput",
- (u32 *)breakinput, array_size);
+ (u32 *)priv->breakinputs, array_size);
if (ret)
return ret;
- for (i = 0; i < nb && !ret; i++) {
- ret = stm32_pwm_set_breakinput(priv,
- breakinput[i].index,
- breakinput[i].level,
- breakinput[i].filter);
+ for (i = 0; i < priv->num_breakinputs; i++) {
+ if (priv->breakinputs[i].index > 1 ||
+ priv->breakinputs[i].level > 1 ||
+ priv->breakinputs[i].filter > 15)
+ return -EINVAL;
}
- return ret;
+ return stm32_pwm_apply_breakinputs(priv);
}
static void stm32_pwm_detect_complementary(struct stm32_pwm *priv)
@@ -614,7 +629,7 @@ static int stm32_pwm_probe(struct platform_device *pdev)
if (!priv->regmap || !priv->clk)
return -EINVAL;
- ret = stm32_pwm_apply_breakinputs(priv, np);
+ ret = stm32_pwm_probe_breakinputs(priv, np);
if (ret)
return ret;
@@ -647,6 +662,42 @@ static int stm32_pwm_remove(struct platform_device *pdev)
return 0;
}
+static int __maybe_unused stm32_pwm_suspend(struct device *dev)
+{
+ struct stm32_pwm *priv = dev_get_drvdata(dev);
+ unsigned int i;
+ u32 ccer, mask;
+
+ /* Look for active channels */
+ ccer = active_channels(priv);
+
+ for (i = 0; i < priv->chip.npwm; i++) {
+ mask = TIM_CCER_CC1E << (i * 4);
+ if (ccer & mask) {
+ dev_err(dev, "PWM %u still in use by consumer %s\n",
+ i, priv->chip.pwms[i].label);
+ return -EBUSY;
+ }
+ }
+
+ return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused stm32_pwm_resume(struct device *dev)
+{
+ struct stm32_pwm *priv = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pinctrl_pm_select_default_state(dev);
+ if (ret)
+ return ret;
+
+ /* restore breakinput registers that may have been lost in low power */
+ return stm32_pwm_apply_breakinputs(priv);
+}
+
+static SIMPLE_DEV_PM_OPS(stm32_pwm_pm_ops, stm32_pwm_suspend, stm32_pwm_resume);
+
static const struct of_device_id stm32_pwm_of_match[] = {
{ .compatible = "st,stm32-pwm", },
{ /* end node */ },
@@ -659,6 +710,7 @@ static struct platform_driver stm32_pwm_driver = {
.driver = {
.name = "stm32-pwm",
.of_match_table = stm32_pwm_of_match,
+ .pm = &stm32_pwm_pm_ops,
},
};
module_platform_driver(stm32_pwm_driver);
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 6f5840a1a82d..581d23287333 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -137,10 +137,10 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
- tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+ tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
- tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+ tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
}
@@ -156,7 +156,6 @@ static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
if (sun4i_pwm->data->has_prescaler_bypass) {
/* First, test without any prescaler when available */
prescaler = PWM_PRESCAL_MASK;
- pval = 1;
/*
* When not using any prescaler, the clock period in nanoseconds
* is not an integer so round it half up instead of
diff --git a/include/linux/mfd/stm32-timers.h b/include/linux/mfd/stm32-timers.h
index 067d14655c28..f8db83aedb2b 100644
--- a/include/linux/mfd/stm32-timers.h
+++ b/include/linux/mfd/stm32-timers.h
@@ -70,14 +70,11 @@
#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */
#define TIM_CCER_CC4P BIT(13) /* Capt/Comp 4 Polarity */
#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12))
-#define TIM_BDTR_BKE BIT(12) /* Break input enable */
-#define TIM_BDTR_BKP BIT(13) /* Break input polarity */
+#define TIM_BDTR_BKE(x) BIT(12 + (x) * 12) /* Break input enable */
+#define TIM_BDTR_BKP(x) BIT(13 + (x) * 12) /* Break input polarity */
#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */
#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */
-#define TIM_BDTR_BKF (BIT(16) | BIT(17) | BIT(18) | BIT(19))
-#define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23))
-#define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */
-#define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */
+#define TIM_BDTR_BKF(x) (0xf << (16 + (x) * 4))
#define TIM_DCR_DBA GENMASK(4, 0) /* DMA base addr */
#define TIM_DCR_DBL GENMASK(12, 8) /* DMA burst len */
@@ -87,8 +84,7 @@
#define TIM_CR2_MMS2_SHIFT 20
#define TIM_SMCR_TS_SHIFT 4
#define TIM_BDTR_BKF_MASK 0xF
-#define TIM_BDTR_BKF_SHIFT 16
-#define TIM_BDTR_BK2F_SHIFT 20
+#define TIM_BDTR_BKF_SHIFT(x) (16 + (x) * 4)
enum stm32_timers_dmas {
STM32_TIMERS_DMA_CH1,
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index b2c9c460947d..0ef808d925bb 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -243,10 +243,7 @@ pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle,
* @request: optional hook for requesting a PWM
* @free: optional hook for freeing a PWM
* @capture: capture and report PWM signal
- * @apply: atomically apply a new PWM config. The state argument
- * should be adjusted with the real hardware config (if the
- * approximate the period or duty_cycle value, state should
- * reflect it)
+ * @apply: atomically apply a new PWM config
* @get_state: get the current PWM state. This function is only
* called once per PWM device when the PWM chip is
* registered.