diff options
| -rw-r--r-- | drivers/spi/spi-cadence-quadspi.c | 27 |
1 files changed, 14 insertions, 13 deletions
diff --git a/drivers/spi/spi-cadence-quadspi.c b/drivers/spi/spi-cadence-quadspi.c index d62d69dd72b9..a2de23516553 100644 --- a/drivers/spi/spi-cadence-quadspi.c +++ b/drivers/spi/spi-cadence-quadspi.c @@ -800,19 +800,20 @@ static int cqspi_write_setup(struct cqspi_flash_pdata *f_pdata, reg = cqspi_calc_rdreg(f_pdata); writel(reg, reg_base + CQSPI_REG_RD_INSTR); - if (f_pdata->dtr) { - /* - * Some flashes like the cypress Semper flash expect a 4-byte - * dummy address with the Read SR command in DTR mode, but this - * controller does not support sending address with the Read SR - * command. So, disable write completion polling on the - * controller's side. spi-nor will take care of polling the - * status register. - */ - reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL); - reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL; - writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL); - } + /* + * SPI NAND flashes require the address of the status register to be + * passed in the Read SR command. Also, some SPI NOR flashes like the + * cypress Semper flash expect a 4-byte dummy address in the Read SR + * command in DTR mode. + * + * But this controller does not support address phase in the Read SR + * command when doing auto-HW polling. So, disable write completion + * polling on the controller's side. spinand and spi-nor will take + * care of polling the status register. + */ + reg = readl(reg_base + CQSPI_REG_WR_COMPLETION_CTRL); + reg |= CQSPI_REG_WR_DISABLE_AUTO_POLL; + writel(reg, reg_base + CQSPI_REG_WR_COMPLETION_CTRL); reg = readl(reg_base + CQSPI_REG_SIZE); reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; |