diff options
806 files changed, 53237 insertions, 5093 deletions
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index ffd526363fda..cc5a21b47e26 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -198,6 +198,7 @@ properties: - qcom,kryo660 - qcom,kryo685 - qcom,kryo780 + - qcom,oryon - qcom,scorpion enable-method: diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 32b195852a75..228dcc5c7d6f 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -967,6 +967,7 @@ properties: - menlo,mx8menlo # Verdin iMX8M Mini Module on i.MX8MM Menlo board - toradex,verdin-imx8mm-nonwifi-dahlia # Verdin iMX8M Mini Module on Dahlia - toradex,verdin-imx8mm-nonwifi-dev # Verdin iMX8M Mini Module on Verdin Development Board + - toradex,verdin-imx8mm-nonwifi-mallow # Verdin iMX8M Mini Module on Mallow - toradex,verdin-imx8mm-nonwifi-yavia # Verdin iMX8M Mini Module on Yavia - const: toradex,verdin-imx8mm-nonwifi # Verdin iMX8M Mini Module without Wi-Fi / BT - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module @@ -977,6 +978,7 @@ properties: - enum: - toradex,verdin-imx8mm-wifi-dahlia # Verdin iMX8M Mini Wi-Fi / BT Module on Dahlia - toradex,verdin-imx8mm-wifi-dev # Verdin iMX8M Mini Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-imx8mm-wifi-mallow # Verdin iMX8M Mini Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mm-wifi-yavia # Verdin iMX8M Mini Wi-Fi / BT Module on Yavia - const: toradex,verdin-imx8mm-wifi # Verdin iMX8M Mini Wi-Fi / BT Module - const: toradex,verdin-imx8mm # Verdin iMX8M Mini Module @@ -1022,7 +1024,10 @@ properties: - description: Variscite VAR-SOM-MX8MN based boards items: - - const: variscite,var-som-mx8mn-symphony + - enum: + - dimonoff,gateway-evk # i.MX8MN Dimonoff Gateway EVK Board + - rve,rve-gateway # i.MX8MN RVE Gateway Board + - variscite,var-som-mx8mn-symphony - const: variscite,var-som-mx8mn - const: fsl,imx8mn @@ -1048,6 +1053,9 @@ properties: - gateworks,imx8mp-gw73xx-2x # i.MX8MP Gateworks Board - gateworks,imx8mp-gw74xx # i.MX8MP Gateworks Board - gateworks,imx8mp-gw7905-2x # i.MX8MP Gateworks Board + - skov,imx8mp-skov-revb-hdmi # SKOV i.MX8MP climate control without panel + - skov,imx8mp-skov-revb-lt6 # SKOV i.MX8MP climate control with 7” panel + - skov,imx8mp-skov-revb-mi1010ait-1cp1 # SKOV i.MX8MP climate control with 10.1" panel - toradex,verdin-imx8mp # Verdin iMX8M Plus Modules - toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Modules without Wi-Fi / BT - toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Modules @@ -1100,6 +1108,7 @@ properties: - enum: - toradex,verdin-imx8mp-nonwifi-dahlia # Verdin iMX8M Plus Module on Dahlia - toradex,verdin-imx8mp-nonwifi-dev # Verdin iMX8M Plus Module on Verdin Development Board + - toradex,verdin-imx8mp-nonwifi-mallow # Verdin iMX8M Plus Module on Mallow - toradex,verdin-imx8mp-nonwifi-yavia # Verdin iMX8M Plus Module on Yavia - const: toradex,verdin-imx8mp-nonwifi # Verdin iMX8M Plus Module without Wi-Fi / BT - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module @@ -1110,6 +1119,7 @@ properties: - enum: - toradex,verdin-imx8mp-wifi-dahlia # Verdin iMX8M Plus Wi-Fi / BT Module on Dahlia - toradex,verdin-imx8mp-wifi-dev # Verdin iMX8M Plus Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-imx8mp-wifi-mallow # Verdin iMX8M Plus Wi-Fi / BT Module on Mallow - toradex,verdin-imx8mp-wifi-yavia # Verdin iMX8M Plus Wi-Fi / BT Module on Yavia - const: toradex,verdin-imx8mp-wifi # Verdin iMX8M Plus Wi-Fi / BT Module - const: toradex,verdin-imx8mp # Verdin iMX8M Plus Module @@ -1476,6 +1486,16 @@ properties: - const: solidrun,lx2162a-som - const: fsl,lx2160a + - description: + TQ-Systems TQMLX2160A is a series of socketable SOM featuring + LX2160A system-on-chip variants. MBLX2160A mainboard can be used a + starterkit. + items: + - enum: + - tq,lx2160a-tqmlx2160a-mblx2160a + - const: tq,lx2160a-tqmlx2160a + - const: fsl,lx2160a + - description: S32G2 based Boards items: - enum: diff --git a/Documentation/devicetree/bindings/arm/google.yaml b/Documentation/devicetree/bindings/arm/google.yaml new file mode 100644 index 000000000000..e20b5c9b16bc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/google.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/google.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google Tensor platforms + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + ARM platforms using SoCs designed by Google branded "Tensor" used in Pixel + devices. + + Currently upstream this is devices using "gs101" SoC which is found in Pixel + 6, Pixel 6 Pro and Pixel 6a. + + Google have a few different names for the SoC: + - Marketing name ("Tensor") + - Codename ("Whitechapel") + - SoC ID ("gs101") + - Die ID ("S5P9845") + + Likewise there are a couple of names for the actual device + - Marketing name ("Pixel 6") + - Codename ("Oriole") + + Devicetrees should use the lowercased SoC ID and lowercased board codename, + e.g. gs101 and gs101-oriole. + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Google Pixel 6 / Oriole + items: + - enum: + - google,gs101-oriole + - const: google,gs101 + + # Bootloader requires empty ect node to be present + ect: + type: object + additionalProperties: false + +required: + - ect + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml index 5a53d433b6f0..7a221e1c09df 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.yaml @@ -82,6 +82,23 @@ properties: ranges: true +patternProperties: + '^clock@': + type: object + additionalProperties: false + + properties: + compatible: + enum: + - hisilicon,hi3620-clock + - hisilicon,hi3620-mmc-clock + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml index 52d78521e412..16d2e132d3d1 100644 --- a/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml +++ b/Documentation/devicetree/bindings/arm/marvell/armada-7k-8k.yaml @@ -60,4 +60,26 @@ properties: - const: marvell,armada-ap807-quad - const: marvell,armada-ap807 + - description: + Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus + Armada CN9130 COM Express CPU module + items: + - const: marvell,cn9130-ac5x-carrier + - const: marvell,rd-ac5x-carrier + - const: marvell,cn9130-cpu-module + - const: marvell,cn9130 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + + - description: + Alleycat5X (98DX35xx) Reference Design as COM Express Carrier plus + Armada CN9131 COM Express CPU module + items: + - const: marvell,cn9131-ac5x-carrier + - const: marvell,rd-ac5x-carrier + - const: marvell,cn9131-cpu-module + - const: marvell,cn9131 + - const: marvell,armada-ap807-quad + - const: marvell,armada-ap807 + additionalProperties: true diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml index a5999b3afc35..6f2f64ae76fc 100644 --- a/Documentation/devicetree/bindings/arm/mediatek.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml @@ -176,6 +176,10 @@ properties: - const: mediatek,mt8186 - items: - enum: + - mediatek,mt8188-evb + - const: mediatek,mt8188 + - items: + - enum: - mediatek,mt8192-evb - const: mediatek,mt8192 - items: @@ -235,6 +239,13 @@ properties: items: - const: google,kappa - const: mediatek,mt8183 + - description: Google Katsu (ASUS Chromebook Detachable CZ1) + items: + - enum: + - google,katsu-sku32 + - google,katsu-sku38 + - const: google,katsu + - const: mediatek,mt8183 - description: Google Kodama (Lenovo 10e Chromebook Tablet) items: - enum: @@ -244,6 +255,20 @@ properties: - google,kodama-sku32 - const: google,kodama - const: mediatek,mt8183 + - description: Google Makomo (Lenovo 100e Chromebook 2nd Gen MTK 2) + items: + - enum: + - google,makomo-sku0 + - google,makomo-sku1 + - const: google,makomo + - const: mediatek,mt8183 + - description: Google Pico (Acer Chromebook Spin 311) + items: + - enum: + - google,pico-sku1 + - google,pico-sku2 + - const: google,pico + - const: mediatek,mt8183 - description: Google Willow (Acer Chromebook 311 C722/C722T) items: - enum: diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt deleted file mode 100644 index 699776be1dd3..000000000000 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt +++ /dev/null @@ -1,39 +0,0 @@ -MediaTek AUDSYS controller -============================ - -The MediaTek AUDSYS controller provides various clocks to the system. - -Required Properties: - -- compatible: Should be one of: - - "mediatek,mt2701-audsys", "syscon" - - "mediatek,mt6765-audsys", "syscon" - - "mediatek,mt6779-audio", "syscon" - - "mediatek,mt7622-audsys", "syscon" - - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon" - - "mediatek,mt8167-audiosys", "syscon" - - "mediatek,mt8183-audiosys", "syscon" - - "mediatek,mt8192-audsys", "syscon" - - "mediatek,mt8516-audsys", "syscon" -- #clock-cells: Must be 1 - -The AUDSYS controller uses the common clk binding from -Documentation/devicetree/bindings/clock/clock-bindings.txt -The available clocks are defined in dt-bindings/clock/mt*-clk.h. - -Required sub-nodes: -------- -For common binding part and usage, refer to -../sonud/mt2701-afe-pcm.txt. - -Example: - - audsys: clock-controller@11220000 { - compatible = "mediatek,mt7622-audsys", "syscon"; - reg = <0 0x11220000 0 0x2000>; - #clock-cells = <1>; - - afe: audio-controller { - ... - }; - }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml new file mode 100644 index 000000000000..45d4a6620041 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.yaml @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/mediatek/mediatek,audsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek AUDSYS controller + +maintainers: + - Eugen Hristev <eugen.hristev@collabora.com> + +description: + The MediaTek AUDSYS controller provides various clocks to the system. + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2701-audsys + - mediatek,mt6765-audsys + - mediatek,mt6779-audsys + - mediatek,mt7622-audsys + - mediatek,mt8167-audsys + - mediatek,mt8173-audsys + - mediatek,mt8183-audsys + - mediatek,mt8186-audsys + - mediatek,mt8192-audsys + - mediatek,mt8516-audsys + - const: syscon + - items: + # Special case for mt7623 for backward compatibility + - const: mediatek,mt7623-audsys + - const: mediatek,mt2701-audsys + - const: syscon + + reg: + maxItems: 1 + + '#clock-cells': + const: 1 + + audio-controller: + $ref: /schemas/sound/mediatek,mt2701-audio.yaml# + type: object + +required: + - compatible + - '#clock-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt2701-power.h> + #include <dt-bindings/clock/mt2701-clk.h> + soc { + #address-cells = <2>; + #size-cells = <2>; + audsys: clock-controller@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x2000>; + #clock-cells = <1>; + + afe: audio-controller { + compatible = "mediatek,mt2701-audio"; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "afe", "asys"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + + clocks = <&infracfg CLK_INFRA_AUDIO>, + <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_48K_TIMING>, + <&topckgen CLK_TOP_AUD_44K_TIMING>, + <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, + <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, + <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, + <&topckgen CLK_TOP_AUD_I2S1_MCLK>, + <&topckgen CLK_TOP_AUD_I2S2_MCLK>, + <&topckgen CLK_TOP_AUD_I2S3_MCLK>, + <&topckgen CLK_TOP_AUD_I2S4_MCLK>, + <&audsys CLK_AUD_I2SO1>, + <&audsys CLK_AUD_I2SO2>, + <&audsys CLK_AUD_I2SO3>, + <&audsys CLK_AUD_I2SO4>, + <&audsys CLK_AUD_I2SIN1>, + <&audsys CLK_AUD_I2SIN2>, + <&audsys CLK_AUD_I2SIN3>, + <&audsys CLK_AUD_I2SIN4>, + <&audsys CLK_AUD_ASRCO1>, + <&audsys CLK_AUD_ASRCO2>, + <&audsys CLK_AUD_ASRCO3>, + <&audsys CLK_AUD_ASRCO4>, + <&audsys CLK_AUD_AFE>, + <&audsys CLK_AUD_AFE_CONN>, + <&audsys CLK_AUD_A1SYS>, + <&audsys CLK_AUD_A2SYS>, + <&audsys CLK_AUD_AFE_MRGIF>; + + clock-names = "infra_sys_audio_clk", + "top_audio_mux1_sel", + "top_audio_mux2_sel", + "top_audio_a1sys_hp", + "top_audio_a2sys_hp", + "i2s0_src_sel", + "i2s1_src_sel", + "i2s2_src_sel", + "i2s3_src_sel", + "i2s0_src_div", + "i2s1_src_div", + "i2s2_src_div", + "i2s3_src_div", + "i2s0_mclk_en", + "i2s1_mclk_en", + "i2s2_mclk_en", + "i2s3_mclk_en", + "i2so0_hop_ck", + "i2so1_hop_ck", + "i2so2_hop_ck", + "i2so3_hop_ck", + "i2si0_hop_ck", + "i2si1_hop_ck", + "i2si2_hop_ck", + "i2si3_hop_ck", + "asrc0_out_ck", + "asrc1_out_ck", + "asrc2_out_ck", + "asrc3_out_ck", + "audio_afe_pd", + "audio_afe_conn_pd", + "audio_a1sys_pd", + "audio_a2sys_pd", + "audio_mrgif_pd"; + + assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, + <&topckgen CLK_TOP_AUD_MUX2_SEL>, + <&topckgen CLK_TOP_AUD_MUX1_DIV>, + <&topckgen CLK_TOP_AUD_MUX2_DIV>; + assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, + <&topckgen CLK_TOP_AUD2PLL_90M>; + assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index 536f5a5ebd24..b3c6888c1457 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -32,6 +32,9 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8188-vdosys0 + - mediatek,mt8188-vdosys1 + - mediatek,mt8188-vppsys0 + - mediatek,mt8188-vppsys1 - mediatek,mt8192-mmsys - mediatek,mt8195-vdosys1 - mediatek,mt8195-vppsys0 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml index 26158d0d72f3..33c94c491828 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.yaml @@ -28,6 +28,7 @@ properties: - mediatek,mt8173-pericfg - mediatek,mt8183-pericfg - mediatek,mt8186-pericfg + - mediatek,mt8188-pericfg - mediatek,mt8195-pericfg - mediatek,mt8516-pericfg - const: syscon diff --git a/Documentation/devicetree/bindings/arm/qcom-soc.yaml b/Documentation/devicetree/bindings/arm/qcom-soc.yaml index 97621c92a1ab..d0751a572af3 100644 --- a/Documentation/devicetree/bindings/arm/qcom-soc.yaml +++ b/Documentation/devicetree/bindings/arm/qcom-soc.yaml @@ -23,7 +23,7 @@ description: | select: properties: compatible: - pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + pattern: "^qcom,.*(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" required: - compatible @@ -31,17 +31,17 @@ properties: compatible: oneOf: # Preferred naming style for compatibles of SoC components: - - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+(pro)?-.*$" + - pattern: "^qcom,(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+(pro)?-.*$" - pattern: "^qcom,(sa|sc)8[0-9]+[a-z][a-z]?-.*$" # Legacy namings - variations of existing patterns/compatibles are OK, # but do not add completely new entries to these: - - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" - - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+.*$" + - pattern: "^qcom,[ak]pss-wdt-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,gcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,mmcc-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,pcie-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" + - pattern: "^qcom,rpm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm)[0-9]+.*$" + - pattern: "^qcom,scm-(apq|ipq|mdm|msm|qcm|qcs|q[dr]u|sa|sc|sd[amx]|sm|x1e)[0-9]+.*$" - enum: - qcom,dsi-ctrl-6g-qcm2290 - qcom,gpucc-sdm630 diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 7f80f48a0954..1a5fb889a444 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -87,29 +87,18 @@ description: | sm8350 sm8450 sm8550 + sm8650 + x1e80100 The 'board' element must be one of the following strings: adp - ap-al02-c2 - ap-al02-c6 - ap-al02-c7 - ap-al02-c8 - ap-al02-c9 - ap-mi01.2 - ap-mi01.3 - ap-mi01.6 - ap-mi01.9 cdp - cp01-c1 dragonboard - hk01 - hk10-c1 - hk10-c2 idp liquid - rdp432-c2 mtp + qcp qrd rb2 ride @@ -138,7 +127,7 @@ description: | There are many devices in the list below that run the standard ChromeOS bootloader setup and use the open source depthcharge bootloader to boot the OS. These devices do not use the scheme described above. For details, see: - https://docs.kernel.org/arm/google/chromebook-boot-flow.html + https://docs.kernel.org/arch/arm/google/chromebook-boot-flow.html properties: $nodename: @@ -186,11 +175,24 @@ properties: - items: - enum: + - microsoft,dempsey + - microsoft,makepeace + - microsoft,moneypenny - samsung,s3ve3g - const: qcom,msm8226 - items: - enum: + - htc,memul + - microsoft,superman-lte + - microsoft,tesla + - motorola,peregrine + - const: qcom,msm8926 + - const: qcom,msm8226 + + - items: + - enum: + - huawei,kiwi - longcheer,l9100 - samsung,a7 - sony,kanuti-tulip @@ -397,6 +399,8 @@ properties: - items: - enum: - fairphone,fp5 + - qcom,qcm6490-idp + - qcom,qcs6490-rb3gen2 - const: qcom,qcm6490 - description: Qualcomm Technologies, Inc. Distributed Unit 1000 platform @@ -1009,6 +1013,7 @@ properties: - sony,pdx203-generic - sony,pdx206-generic - xiaomi,elish + - xiaomi,pipa - const: qcom,sm8250 - items: @@ -1034,6 +1039,18 @@ properties: - qcom,sm8550-qrd - const: qcom,sm8550 + - items: + - enum: + - qcom,sm8650-mtp + - qcom,sm8650-qrd + - const: qcom,sm8650 + + - items: + - enum: + - qcom,x1e80100-crd + - qcom,x1e80100-qcp + - const: qcom,x1e80100 + # Board compatibles go above qcom,msm-id: diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 5f7c6c4aad8f..5cf5cbef2cf5 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -30,9 +30,11 @@ properties: - const: amarula,vyasa-rk3288 - const: rockchip,rk3288 - - description: Anbernic RG351M + - description: Anbernic RK3326 Handheld Gaming Console items: - - const: anbernic,rg351m + - enum: + - anbernic,rg351m + - anbernic,rg351v - const: rockchip,rk3326 - description: Anbernic RG353P @@ -95,22 +97,30 @@ properties: - const: chipspark,rayeager-px2 - const: rockchip,rk3066a + - description: Cool Pi Compute Module 5(CM5) EVB + items: + - enum: + - coolpi,pi-cm5-evb + - const: coolpi,pi-cm5 + - const: rockchip,rk3588 + + - description: Cool Pi 4 Model B + items: + - const: coolpi,pi-4b + - const: rockchip,rk3588s + - description: Edgeble Neural Compute Module 2(Neu2) SoM based boards items: - const: edgeble,neural-compute-module-2-io # Edgeble Neural Compute Module 2 IO Board - const: edgeble,neural-compute-module-2 # Edgeble Neural Compute Module 2 SoM - const: rockchip,rv1126 - - description: Edgeble Neural Compute Module 6(Neu6) Model A SoM based boards - items: - - const: edgeble,neural-compute-module-6a-io # Edgeble Neural Compute Module 6A IO Board - - const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM - - const: rockchip,rk3588 - - - description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards + - description: Edgeble Neural Compute Module 6(Neu6) SoM based boards items: - - const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board - - const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM + - const: edgeble,neural-compute-module-6a-io # Edgeble NCM6A-IO Board + - enum: + - edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM + - edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM - const: rockchip,rk3588 - description: Elgin RV1108 R1 @@ -237,6 +247,11 @@ properties: - const: geekbuying,geekbox - const: rockchip,rk3368 + - description: Geniatech XPI-3128 + items: + - const: geniatech,xpi-3128 + - const: rockchip,rk3128 + - description: Google Bob (Asus Chromebook Flip C101PA) items: - const: google,bob-rev13 @@ -674,9 +689,12 @@ properties: - const: pine64,soquartz - const: rockchip,rk3566 - - description: Powkiddy RGB30 + - description: Powkiddy RK3566 Handheld Gaming Console items: - - const: powkiddy,rgb30 + - enum: + - powkiddy,rgb30 + - powkiddy,rk2023 + - powkiddy,x55 - const: rockchip,rk3566 - description: Radxa Compute Module 3(CM3) @@ -875,6 +893,11 @@ properties: - const: tsd,rk3399-puma-haikou - const: rockchip,rk3399 + - description: Theobroma Systems RK3588-SBC Jaguar + items: + - const: tsd,rk3588-jaguar + - const: rockchip,rk3588 + - description: Tronsmart Orion R68 Meta items: - const: tronsmart,orion-r68-meta @@ -922,6 +945,13 @@ properties: - const: rockchip,rk3568-bpi-r2pro - const: rockchip,rk3568 + - description: Sonoff iHost Smart Home Hub + items: + - const: itead,sonoff-ihost + - enum: + - rockchip,rv1126 + - rockchip,rv1109 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml index e3ffd8159ab6..01dcbd8aa703 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml @@ -230,6 +230,12 @@ properties: - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK - const: samsung,exynosautov9 + - description: Exynos Auto v920 based boards + items: + - enum: + - samsung,exynosautov920-sadk # Samsung Exynos Auto v920 SADK + - const: samsung,exynosautov920 + required: - compatible diff --git a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml index eaa67b8e0d6c..40fc3c8b9dce 100644 --- a/Documentation/devicetree/bindings/arm/sprd/sprd.yaml +++ b/Documentation/devicetree/bindings/arm/sprd/sprd.yaml @@ -35,6 +35,11 @@ properties: - sprd,ums512-1h10 - const: sprd,ums512 + - items: + - enum: + - sprd,ums9620-2h10 + - const: sprd,ums9620 + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml index df087c81c69e..bc2f43330ae4 100644 --- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml +++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml @@ -82,29 +82,19 @@ properties: - shiratech,stm32mp157a-iot-box # IoT Box - shiratech,stm32mp157a-stinger96 # Stinger96 - st,stm32mp157c-ed1 + - st,stm32mp157c-ed1-scmi - st,stm32mp157a-dk1 + - st,stm32mp157a-dk1-scmi - st,stm32mp157c-dk2 + - st,stm32mp157c-dk2-scmi - const: st,stm32mp157 - items: - - const: st,stm32mp157a-dk1-scmi - - const: st,stm32mp157a-dk1 - - const: st,stm32mp157 - - items: - - const: st,stm32mp157c-dk2-scmi - - const: st,stm32mp157c-dk2 - - const: st,stm32mp157 - - items: - - const: st,stm32mp157c-ed1-scmi - - const: st,stm32mp157c-ed1 - - const: st,stm32mp157 - - items: - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 - items: - const: st,stm32mp157c-ev1-scmi - - const: st,stm32mp157c-ev1 - const: st,stm32mp157c-ed1 - const: st,stm32mp157 diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml index 11c5ce941dd7..a9d8e85565b8 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.yaml +++ b/Documentation/devicetree/bindings/arm/sunxi.yaml @@ -868,6 +868,11 @@ properties: - const: topwise,a721 - const: allwinner,sun4i-a10 + - description: Transpeed 8K618-T + items: + - const: transpeed,8k618-t + - const: allwinner,sun50i-h618 + - description: Utoo P66 items: - const: utoo,p66 @@ -1013,6 +1018,11 @@ properties: - const: xunlong,orangepi-zero2 - const: allwinner,sun50i-h616 + - description: Xunlong OrangePi Zero 2W + items: + - const: xunlong,orangepi-zero2w + - const: allwinner,sun50i-h618 + - description: Xunlong OrangePi Zero 3 items: - const: xunlong,orangepi-zero3 diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml index 03d2a0d79fb0..c6506bccfe88 100644 --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml @@ -50,6 +50,7 @@ properties: - enum: - toradex,verdin-am62-nonwifi-dahlia # Verdin AM62 Module on Dahlia - toradex,verdin-am62-nonwifi-dev # Verdin AM62 Module on Verdin Development Board + - toradex,verdin-am62-nonwifi-mallow # Verdin AM62 Module on Mallow - toradex,verdin-am62-nonwifi-yavia # Verdin AM62 Module on Yavia - const: toradex,verdin-am62-nonwifi # Verdin AM62 Module without Wi-Fi / BT - const: toradex,verdin-am62 # Verdin AM62 Module @@ -60,6 +61,7 @@ properties: - enum: - toradex,verdin-am62-wifi-dahlia # Verdin AM62 Wi-Fi / BT Module on Dahlia - toradex,verdin-am62-wifi-dev # Verdin AM62 Wi-Fi / BT M. on Verdin Development B. + - toradex,verdin-am62-wifi-mallow # Verdin AM62 Wi-Fi / BT Module on Mallow - toradex,verdin-am62-wifi-yavia # Verdin AM62 Wi-Fi / BT Module on Yavia - const: toradex,verdin-am62-wifi # Verdin AM62 Wi-Fi / BT Module - const: toradex,verdin-am62 # Verdin AM62 Module diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml index b18fc046390a..93e04a109a12 100644 --- a/Documentation/devicetree/bindings/arm/ti/omap.yaml +++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml @@ -134,6 +134,8 @@ properties: - amazon,omap4-kc1 # Amazon Kindle Fire (first generation) - motorola,droid4 # Motorola Droid 4 XT894 - motorola,droid-bionic # Motorola Droid Bionic XT875 + - motorola,xyboard-mz609 + - motorola,xyboard-mz617 - ti,omap4-panda - ti,omap4-sdp - const: ti,omap4430 diff --git a/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml new file mode 100644 index 000000000000..3eebc03a309b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/google,gs101-clock.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/google,gs101-clock.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Google GS101 SoC clock controller + +maintainers: + - Peter Griffin <peter.griffin@linaro.org> + +description: | + Google GS101 clock controller is comprised of several CMU units, generating + clocks for different domains. Those CMU units are modeled as separate device + tree nodes, and might depend on each other. The root clock in that clock tree + is OSCCLK (24.576 MHz). That external clock must be defined as a fixed-rate + clock in dts. + + CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and + dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP. + + Each clock is assigned an identifier and client nodes can use this identifier + to specify the clock which they consume. All clocks available for usage + in clock consumer nodes are defined as preprocessor macros in + 'dt-bindings/clock/gs101.h' header. + +properties: + compatible: + enum: + - google,gs101-cmu-top + - google,gs101-cmu-apm + - google,gs101-cmu-misc + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + + "#clock-cells": + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#clock-cells" + - clocks + - clock-names + - reg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - google,gs101-cmu-top + - google,gs101-cmu-apm + then: + properties: + clocks: + items: + - description: External reference clock (24.576 MHz) + + clock-names: + items: + - const: oscclk + + - if: + properties: + compatible: + contains: + const: google,gs101-cmu-misc + + then: + properties: + clocks: + items: + - description: Misc bus clock (from CMU_TOP) + - description: Misc sss clock (from CMU_TOP) + + clock-names: + items: + - const: dout_cmu_misc_bus + - const: dout_cmu_misc_sss + +additionalProperties: false + +examples: + # Clock controller node for CMU_TOP + - | + #include <dt-bindings/clock/google,gs101.h> + + cmu_top: clock-controller@1e080000 { + compatible = "google,gs101-cmu-top"; + reg = <0x1e080000 0x8000>; + #clock-cells = <1>; + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/hi3620-clock.txt b/Documentation/devicetree/bindings/clock/hi3620-clock.txt deleted file mode 100644 index dad6269f52c5..000000000000 --- a/Documentation/devicetree/bindings/clock/hi3620-clock.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Hisilicon Hi3620 Clock Controller - -The Hi3620 clock controller generates and supplies clock to various -controllers within the Hi3620 SoC. - -Required Properties: - -- compatible: should be one of the following. - - "hisilicon,hi3620-clock" - controller compatible with Hi3620 SoC. - - "hisilicon,hi3620-mmc-clock" - controller specific for Hi3620 mmc. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes use this identifier -to specify the clock which they consume. - -All these identifier could be found in <dt-bindings/clock/hi3620-clock.h>. diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml index d7214d97b2ba..860570320545 100644 --- a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml +++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml @@ -43,8 +43,6 @@ properties: - mediatek,mt8188-vdecsys - mediatek,mt8188-vdecsys-soc - mediatek,mt8188-vencsys - - mediatek,mt8188-vppsys0 - - mediatek,mt8188-vppsys1 - mediatek,mt8188-wpesys - mediatek,mt8188-wpesys-vpp0 diff --git a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml index 426335a2841c..3fd3dc1069fb 100644 --- a/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,camcc-sm8250.yaml @@ -15,6 +15,9 @@ description: | See also:: include/dt-bindings/clock/qcom,camcc-sm8250.h +allOf: + - $ref: qcom,gcc.yaml# + properties: compatible: const: qcom,sm8250-camcc @@ -33,15 +36,6 @@ properties: - const: bi_tcxo_ao - const: sleep_clk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - power-domains: items: - description: MMCX power domain @@ -56,14 +50,10 @@ properties: required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml index 52e7831a8d6d..2d44ddc45aab 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8074.yaml @@ -27,11 +27,15 @@ properties: items: - description: board XO clock - description: sleep clock + - description: Gen3 QMP PCIe PHY PIPE clock + - description: Gen2 QMP PCIe PHY PIPE clock clock-names: items: - const: xo - const: sleep_clk + - const: pcie0_pipe + - const: pcie1_pipe required: - compatible diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml index 4eb5e59f6772..ca857942ed6c 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml @@ -35,6 +35,8 @@ properties: - qcom,sm8350-rpmh-clk - qcom,sm8450-rpmh-clk - qcom,sm8550-rpmh-clk + - qcom,sm8650-rpmh-clk + - qcom,x1e80100-rpmh-clk clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml index 2dfc2a4f1918..c7fe6400ea13 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml @@ -15,6 +15,9 @@ description: | See also:: include/dt-bindings/clock/qcom,camcc-sc7180.h +allOf: + - $ref: qcom,gcc.yaml# + properties: compatible: const: qcom,sc7180-camcc @@ -31,28 +34,15 @@ properties: - const: iface - const: xo - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - reg: maxItems: 1 required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml index 01feef1cab0a..dcef8de3a905 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sc7280-camcc.yaml @@ -15,6 +15,9 @@ description: | See also:: include/dt-bindings/clock/qcom,camcc-sc7280.h +allOf: + - $ref: qcom,gcc.yaml# + properties: compatible: const: qcom,sc7280-camcc @@ -31,28 +34,15 @@ properties: - const: bi_tcxo_ao - const: sleep_clk - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - reg: maxItems: 1 required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml index 91d1f7918037..810b852ae371 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sdm845-camcc.yaml @@ -15,6 +15,9 @@ description: | See also:: include/dt-bindings/clock/qcom,camcc-sm845.h +allOf: + - $ref: qcom,gcc.yaml# + properties: compatible: const: qcom,sdm845-camcc @@ -27,28 +30,15 @@ properties: items: - const: bi_tcxo - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - reg: maxItems: 1 required: - compatible - - reg - clocks - clock-names - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml index dc3c18e4ead7..48986460f994 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml @@ -16,10 +16,15 @@ description: | See also:: include/dt-bindings/clock/qcom,sm8450-camcc.h include/dt-bindings/clock/qcom,sm8550-camcc.h + include/dt-bindings/clock/qcom,sc8280xp-camcc.h + +allOf: + - $ref: qcom,gcc.yaml# properties: compatible: enum: + - qcom,sc8280xp-camcc - qcom,sm8450-camcc - qcom,sm8550-camcc @@ -40,29 +45,16 @@ properties: description: A phandle to an OPP node describing required MMCX performance point. - '#clock-cells': - const: 1 - - '#reset-cells': - const: 1 - - '#power-domain-cells': - const: 1 - reg: maxItems: 1 required: - compatible - - reg - clocks - power-domains - required-opps - - '#clock-cells' - - '#reset-cells' - - '#power-domain-cells' -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml index 2320be920a5f..1a384e8532a5 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml @@ -17,12 +17,14 @@ description: | include/dt-bindings/clock/qcom,sm8450-gpucc.h include/dt-bindings/clock/qcom,sm8550-gpucc.h include/dt-bindings/reset/qcom,sm8450-gpucc.h + include/dt-bindings/reset/qcom,sm8650-gpucc.h properties: compatible: enum: - qcom,sm8450-gpucc - qcom,sm8550-gpucc + - qcom,sm8650-gpucc clocks: items: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml index 1bf1a41fd89c..af16b05eac96 100644 --- a/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml +++ b/Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml @@ -13,12 +13,16 @@ description: | Qualcomm TCSR clock control module provides the clocks, resets and power domains on SM8550 - See also:: include/dt-bindings/clock/qcom,sm8550-tcsr.h + See also: + - include/dt-bindings/clock/qcom,sm8550-tcsr.h + - include/dt-bindings/clock/qcom,sm8650-tcsr.h properties: compatible: items: - - const: qcom,sm8550-tcsr + - enum: + - qcom,sm8550-tcsr + - qcom,sm8650-tcsr - const: syscon clocks: diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml new file mode 100644 index 000000000000..5e0c45c380f5 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8650-dispcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display Clock & Reset Controller for SM8650 + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + Qualcomm display clock control module provides the clocks, resets and power + domains on SM8650. + + See also:: include/dt-bindings/clock/qcom,sm8650-dispcc.h + +properties: + compatible: + enum: + - qcom,sm8650-dispcc + + clocks: + items: + - description: Board XO source + - description: Board Always On XO source + - description: Display's AHB clock + - description: sleep clock + - description: Byte clock from DSI PHY0 + - description: Pixel clock from DSI PHY0 + - description: Byte clock from DSI PHY1 + - description: Pixel clock from DSI PHY1 + - description: Link clock from DP PHY0 + - description: VCO DIV clock from DP PHY0 + - description: Link clock from DP PHY1 + - description: VCO DIV clock from DP PHY1 + - description: Link clock from DP PHY2 + - description: VCO DIV clock from DP PHY2 + - description: Link clock from DP PHY3 + - description: VCO DIV clock from DP PHY3 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + + '#power-domain-cells': + const: 1 + + reg: + maxItems: 1 + + power-domains: + description: + A phandle and PM domain specifier for the MMCX power domain. + maxItems: 1 + + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + maxItems: 1 + +required: + - compatible + - reg + - clocks + - '#clock-cells' + - '#reset-cells' + - '#power-domain-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8650-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + clock-controller@af00000 { + compatible = "qcom,sm8650-dispcc"; + reg = <0x0af00000 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi1_phy 0>, + <&dsi1_phy 1>, + <&dp0_phy 0>, + <&dp0_phy 1>, + <&dp1_phy 0>, + <&dp1_phy 1>, + <&dp2_phy 0>, + <&dp2_phy 1>, + <&dp3_phy 0>, + <&dp3_phy 1>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + }; +... diff --git a/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml new file mode 100644 index 000000000000..b54761cc8674 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,sm8650-gcc.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,sm8650-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SM8650 + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SM8650 + + See also:: include/dt-bindings/clock/qcom,sm8650-gcc.h + +properties: + compatible: + const: qcom,sm8650-gcc + + clocks: + items: + - description: Board XO source + - description: Board Always On XO source + - description: Sleep clock source + - description: PCIE 0 Pipe clock source + - description: PCIE 1 Pipe clock source + - description: PCIE 1 Phy Auxiliary clock source + - description: UFS Phy Rx symbol 0 clock source + - description: UFS Phy Rx symbol 1 clock source + - description: UFS Phy Tx symbol 0 clock source + - description: USB3 Phy wrapper pipe clock source + +required: + - compatible + - clocks + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,sm8650-gcc"; + reg = <0x00100000 0x001f4200>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_1_qmpphy>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml new file mode 100644 index 000000000000..14a796dbf8bc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,x1e80100-gcc.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,x1e80100-gcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on X1E80100 + +maintainers: + - Rajendra Nayak <quic_rjendra@quicinc.com> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on X1E80100 + + See also:: include/dt-bindings/clock/qcom,x1e80100-gcc.h + +properties: + compatible: + const: qcom,x1e80100-gcc + + clocks: + items: + - description: Board XO source + - description: Sleep clock source + - description: PCIe 3 pipe clock + - description: PCIe 4 pipe clock + - description: PCIe 5 pipe clock + - description: PCIe 6a pipe clock + - description: PCIe 6b pipe clock + - description: USB QMP Phy 0 clock source + - description: USB QMP Phy 1 clock source + - description: USB QMP Phy 2 clock source + + power-domains: + description: + A phandle and PM domain specifier for the CX power domain. + maxItems: 1 + +required: + - compatible + - clocks + - power-domains + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/power/qcom,rpmhpd.h> + clock-controller@100000 { + compatible = "qcom,x1e80100-gcc"; + reg = <0x00100000 0x200000>; + clocks = <&bi_tcxo_div2>, + <&sleep_clk>, + <&pcie3_phy>, + <&pcie4_phy>, + <&pcie5_phy>, + <&pcie6a_phy>, + <&pcie6b_phy>, + <&usb_1_ss0_qmpphy 0>, + <&usb_1_ss1_qmpphy 1>, + <&usb_1_ss2_qmpphy 2>; + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml index 7fd42c8fdc32..b4c28e96dd55 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,aal.yaml @@ -24,6 +24,7 @@ properties: - enum: - mediatek,mt8173-disp-aal - mediatek,mt8183-disp-aal + - mediatek,mt8195-mdp3-aal - items: - enum: - mediatek,mt2712-disp-aal diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml index f21e44092043..b886ca0d89ea 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,color.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt2701-disp-color - mediatek,mt8167-disp-color - mediatek,mt8173-disp-color + - mediatek,mt8195-mdp3-color - items: - enum: - mediatek,mt7623-disp-color diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml index ed24b617090b..8611319bed2e 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.yaml @@ -34,6 +34,10 @@ properties: - enum: - mediatek,mt6795-dsi - const: mediatek,mt8173-dsi + - items: + - enum: + - mediatek,mt8195-dsi + - const: mediatek,mt8183-dsi reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml index 801fa66ae615..677882348ede 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml @@ -23,7 +23,11 @@ description: properties: compatible: - const: mediatek,mt8195-disp-ethdr + oneOf: + - const: mediatek,mt8195-disp-ethdr + - items: + - const: mediatek,mt8188-disp-ethdr + - const: mediatek,mt8195-disp-ethdr reg: maxItems: 7 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml deleted file mode 100644 index dd12e2ff685c..000000000000 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml +++ /dev/null @@ -1,88 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/display/mediatek/mediatek,mdp-rdma.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: MediaTek MDP RDMA - -maintainers: - - Chun-Kuang Hu <chunkuang.hu@kernel.org> - - Philipp Zabel <p.zabel@pengutronix.de> - -description: - The MediaTek MDP RDMA stands for Read Direct Memory Access. - It provides real time data to the back-end panel driver, such as DSI, - DPI and DP_INTF. - It contains one line buffer to store the sufficient pixel data. - RDMA device node must be siblings to the central MMSYS_CONFIG node. - For a description of the MMSYS_CONFIG binding, see - Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml for details. - -properties: - compatible: - const: mediatek,mt8195-vdo1-rdma - - reg: - maxItems: 1 - - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - clocks: - items: - - description: RDMA Clock - - iommus: - maxItems: 1 - - mediatek,gce-client-reg: - description: - The register of display function block to be set by gce. There are 4 arguments, - such as gce node, subsys id, offset and register size. The subsys id that is - mapping to the register of display function blocks is defined in the gce header - include/dt-bindings/gce/<chip>-gce.h of each chips. - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - items: - - description: phandle of GCE - - description: GCE subsys id - - description: register offset - - description: register size - maxItems: 1 - -required: - - compatible - - reg - - power-domains - - clocks - - iommus - - mediatek,gce-client-reg - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/arm-gic.h> - #include <dt-bindings/clock/mt8195-clk.h> - #include <dt-bindings/power/mt8195-power.h> - #include <dt-bindings/gce/mt8195-gce.h> - #include <dt-bindings/memory/mt8195-memory-port.h> - - soc { - #address-cells = <2>; - #size-cells = <2>; - - rdma@1c104000 { - compatible = "mediatek,mt8195-vdo1-rdma"; - reg = <0 0x1c104000 0 0x1000>; - interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&vdosys1 CLK_VDO1_MDP_RDMA0>; - power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; - iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; - mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index eead5cb8636e..dae839279950 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -24,9 +24,13 @@ properties: - enum: - mediatek,mt8173-disp-merge - mediatek,mt8195-disp-merge + - mediatek,mt8195-mdp3-merge - items: - const: mediatek,mt6795-disp-merge - const: mediatek,mt8173-disp-merge + - items: + - const: mediatek,mt8188-disp-merge + - const: mediatek,mt8195-disp-merge reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml index 3e1069b00b56..c471a181d125 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ovl.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt8173-disp-ovl - mediatek,mt8183-disp-ovl - mediatek,mt8192-disp-ovl + - mediatek,mt8195-mdp3-ovl - items: - enum: - mediatek,mt7623-disp-ovl diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml new file mode 100644 index 000000000000..be07bbdc54e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Padding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + Padding provides ability to add pixels to width and height of a layer with + specified colors. Due to hardware design, Mixer in VDOSYS1 requires + width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled, + we need Padding to deal with odd width. + Please notice that even if the Padding is in bypass mode, settings in + register must be cleared to 0, or undefined behaviors could happen. + +properties: + compatible: + enum: + - mediatek,mt8188-disp-padding + - mediatek,mt8195-mdp3-padding + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Padding's clocks + + mediatek,gce-client-reg: + description: + GCE (Global Command Engine) is a multi-core micro processor that helps + its clients to execute commands without interrupting CPU. This property + describes GCE client's information that is composed by 4 fields. + 1. Phandle of the GCE (there may be several GCE processors) + 2. Sub-system ID defined in the dt-binding like a user ID + (Please refer to include/dt-bindings/gce/<chip>-gce.h) + 3. Offset from base address of the subsys you are at + 4. Size of the register the client needs + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: Phandle of the GCE + - description: Subsys ID defined in the dt-binding + - description: Offset from base address of the subsys + - description: Size of register + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + padding0: padding@1c11d000 { + compatible = "mediatek,mt8188-disp-padding"; + reg = <0 0x1c11d000 0 0x1000>; + clocks = <&vdosys1 CLK_VDO1_PADDING0>; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml index a8a5c9608598..e4affc854f3d 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,split.yaml @@ -23,6 +23,7 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-split + - mediatek,mt8195-mdp3-split - items: - const: mediatek,mt6795-disp-split - const: mediatek,mt8173-disp-split @@ -38,6 +39,21 @@ properties: the power controller specified by phandle. See Documentation/devicetree/bindings/power/power-domain.yaml for details. + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + clocks: items: - description: SPLIT Clock @@ -48,6 +64,17 @@ required: - power-domains - clocks +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-split + + then: + required: + - mediatek,gce-client-reg + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml index ca02baba5526..0801da33a385 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml @@ -42,6 +42,11 @@ properties: - const: arm,mali-t760 - items: - enum: + - samsung,exynos7-mali + - const: samsung,exynos5433-mali + - const: arm,mali-t760 + - items: + - enum: - rockchip,rk3399-mali - const: arm,mali-t860 diff --git a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml index 95cbdcb56efe..780ccb5ee9b4 100644 --- a/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml +++ b/Documentation/devicetree/bindings/hwinfo/samsung,exynos-chipid.yaml @@ -11,9 +11,21 @@ maintainers: properties: compatible: - enum: - - samsung,exynos4210-chipid - - samsung,exynos850-chipid + oneOf: + - enum: + - samsung,exynos4210-chipid + - samsung,exynos850-chipid + - items: + - enum: + - samsung,exynos5433-chipid + - samsung,exynos7-chipid + - const: samsung,exynos4210-chipid + - items: + - enum: + - samsung,exynos7885-chipid + - samsung,exynosautov9-chipid + - samsung,exynosautov920-chipid + - const: samsung,exynos850-chipid reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml index 3e52a0db6c41..df9c57bca2a8 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml +++ b/Documentation/devicetree/bindings/i2c/i2c-exynos5.yaml @@ -25,7 +25,16 @@ properties: - samsung,exynos5250-hsi2c # Exynos5250 and Exynos5420 - samsung,exynos5260-hsi2c # Exynos5260 - samsung,exynos7-hsi2c # Exynos7 - - samsung,exynosautov9-hsi2c # ExynosAutoV9 and Exynos850 + - samsung,exynosautov9-hsi2c + - items: + - enum: + - samsung,exynos5433-hsi2c + - tesla,fsd-hsi2c + - const: samsung,exynos7-hsi2c + - items: + - enum: + - samsung,exynos850-hsi2c + - const: samsung,exynosautov9-hsi2c - const: samsung,exynos5-hsi2c # Exynos5250 and Exynos5420 deprecated: true diff --git a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml index b204e35e4f8d..1303502cf265 100644 --- a/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/samsung,s3c2410-i2c.yaml @@ -11,14 +11,20 @@ maintainers: properties: compatible: - enum: - - samsung,s3c2410-i2c - - samsung,s3c2440-i2c - # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs: - - samsung,s3c2440-hdmiphy-i2c - # For s3c2440-like I2C used as a host to SATA PHY controller on an - # internal bus: - - samsung,exynos5-sata-phy-i2c + oneOf: + - enum: + - samsung,s3c2410-i2c + - samsung,s3c2440-i2c + # For s3c2440-like I2C used inside HDMIPHY block found on several SoCs: + - samsung,s3c2440-hdmiphy-i2c + # For s3c2440-like I2C used as a host to SATA PHY controller on an + # internal bus: + - samsung,exynos5-sata-phy-i2c + - items: + - enum: + - samsung,exynos7885-i2c + - samsung,exynos850-i2c + - const: samsung,s3c2440-i2c '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index 582d0a03b814..4e40f6bed5db 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -11,18 +11,23 @@ maintainers: properties: compatible: - enum: - - samsung,exynos-adc-v1 # Exynos5250 - - samsung,exynos-adc-v2 - - samsung,exynos3250-adc - - samsung,exynos4212-adc # Exynos4212 and Exynos4412 - - samsung,exynos7-adc - - samsung,s3c2410-adc - - samsung,s3c2416-adc - - samsung,s3c2440-adc - - samsung,s3c2443-adc - - samsung,s3c6410-adc - - samsung,s5pv210-adc + oneOf: + - enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + - items: + - enum: + - samsung,exynos5433-adc + - const: samsung,exynos7-adc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml new file mode 100644 index 000000000000..14b1a0b08e73 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm6115.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm6115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6115 Network-On-Chip interconnect + +maintainers: + - Konrad Dybcio <konradybcio@kernel.org> + +description: + The Qualcomm SM6115 interconnect providers support adjusting the + bandwidth requirements between the various NoC fabrics. + +properties: + compatible: + enum: + - qcom,sm6115-bimc + - qcom,sm6115-cnoc + - qcom,sm6115-snoc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + + clock-names: + minItems: 1 + maxItems: 4 + +# Child node's properties +patternProperties: + '^interconnect-[a-z0-9]+$': + type: object + description: + The interconnect providers do not have a separate QoS register space, + but share parent's space. + + $ref: qcom,rpm-common.yaml# + + properties: + compatible: + enum: + - qcom,sm6115-clk-virt + - qcom,sm6115-mmrt-virt + - qcom,sm6115-mmnrt-virt + + required: + - compatible + + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: qcom,rpm-common.yaml# + - if: + properties: + compatible: + const: qcom,sm6115-cnoc + + then: + properties: + clocks: + items: + - description: USB-NoC AXI clock + + clock-names: + items: + - const: usb_axi + + - if: + properties: + compatible: + const: qcom,sm6115-snoc + + then: + properties: + clocks: + items: + - description: CPU-NoC AXI clock. + - description: UFS-NoC AXI clock. + - description: USB-NoC AXI clock. + - description: IPA clock. + + clock-names: + items: + - const: cpu_axi + - const: ufs_axi + - const: usb_axi + - const: ipa + + - if: + properties: + compatible: + enum: + - qcom,sm6115-bimc + - qcom,sm6115-clk-virt + - qcom,sm6115-mmrt-virt + - qcom,sm6115-mmnrt-virt + + then: + properties: + clocks: false + clock-names: false + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-sm6115.h> + #include <dt-bindings/clock/qcom,rpmcc.h> + + snoc: interconnect@1880000 { + compatible = "qcom,sm6115-snoc"; + reg = <0x01880000 0x60200>; + clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>; + clock-names = "cpu_axi", + "ufs_axi", + "usb_axi", + "ipa"; + #interconnect-cells = <1>; + + qup_virt: interconnect-clk { + compatible = "qcom,sm6115-clk-virt"; + #interconnect-cells = <1>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,sm6115-mmnrt-virt"; + #interconnect-cells = <1>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,sm6115-mmrt-virt"; + #interconnect-cells = <1>; + }; + }; + + cnoc: interconnect@1900000 { + compatible = "qcom,sm6115-cnoc"; + reg = <0x01900000 0x8200>; + #interconnect-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml new file mode 100644 index 000000000000..f9322de7cd61 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8650-rpmh.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,sm8650-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on SM8650 + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + - Neil Armstrong <neil.armstrong@linaro.org> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also:: include/dt-bindings/interconnect/qcom,sm8650-rpmh.h + +properties: + compatible: + enum: + - qcom,sm8650-aggre1-noc + - qcom,sm8650-aggre2-noc + - qcom,sm8650-clk-virt + - qcom,sm8650-cnoc-main + - qcom,sm8650-config-noc + - qcom,sm8650-gem-noc + - qcom,sm8650-lpass-ag-noc + - qcom,sm8650-lpass-lpiaon-noc + - qcom,sm8650-lpass-lpicx-noc + - qcom,sm8650-mc-virt + - qcom,sm8650-mmss-noc + - qcom,sm8650-nsp-noc + - qcom,sm8650-pcie-anoc + - qcom,sm8650-system-noc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-clk-virt + - qcom,sm8650-mc-virt + then: + properties: + reg: false + else: + required: + - reg + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-pcie-anoc + then: + properties: + clocks: + items: + - description: aggre-NOC PCIe AXI clock + - description: cfg-NOC PCIe a-NOC AHB clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-aggre1-noc + then: + properties: + clocks: + items: + - description: aggre UFS PHY AXI clock + - description: aggre USB3 PRIM AXI clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-aggre2-noc + then: + properties: + clocks: + items: + - description: RPMH CC IPA clock + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-aggre1-noc + - qcom,sm8650-aggre2-noc + - qcom,sm8650-pcie-anoc + then: + required: + - clocks + else: + properties: + clocks: false + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,sm8650-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8650-aggre1-noc"; + reg = <0x016e0000 0x14400>; + #interconnect-cells = <2>; + clocks = <&gcc_phy_axi_clk>, <&gcc_prim_axi_clk>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml new file mode 100644 index 000000000000..08b0210e0e59 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/qcom,x1e80100-rpmh.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interconnect/qcom,x1e80100-rpmh.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm RPMh Network-On-Chip Interconnect on X1E80100 + +maintainers: + - Rajendra Nayak <quic_rjendra@quicinc.com> + - Abel Vesa <abel.vesa@linaro.org> + +description: | + RPMh interconnect providers support system bandwidth requirements through + RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is + able to communicate with the BCM through the Resource State Coordinator (RSC) + associated with each execution environment. Provider nodes must point to at + least one RPMh device child node pertaining to their RSC and each provider + can map to multiple RPMh resources. + + See also:: include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h + +properties: + compatible: + enum: + - qcom,x1e80100-aggre1-noc + - qcom,x1e80100-aggre2-noc + - qcom,x1e80100-clk-virt + - qcom,x1e80100-cnoc-cfg + - qcom,x1e80100-cnoc-main + - qcom,x1e80100-gem-noc + - qcom,x1e80100-lpass-ag-noc + - qcom,x1e80100-lpass-lpiaon-noc + - qcom,x1e80100-lpass-lpicx-noc + - qcom,x1e80100-mc-virt + - qcom,x1e80100-mmss-noc + - qcom,x1e80100-nsp-noc + - qcom,x1e80100-pcie-center-anoc + - qcom,x1e80100-pcie-north-anoc + - qcom,x1e80100-pcie-south-anoc + - qcom,x1e80100-system-noc + - qcom,x1e80100-usb-center-anoc + - qcom,x1e80100-usb-north-anoc + - qcom,x1e80100-usb-south-anoc + + reg: + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: qcom,rpmh-common.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,x1e80100-clk-virt + - qcom,x1e80100-mc-virt + then: + properties: + reg: false + else: + required: + - reg + +unevaluatedProperties: false + +examples: + - | + clk_virt: interconnect-0 { + compatible = "qcom,x1e80100-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,x1e80100-aggre1-noc"; + reg = <0x016e0000 0x14400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 0c07e8dda445..709b2211276b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -66,6 +66,7 @@ properties: - enum: - allwinner,sun20i-d1-plic - sophgo,cv1800b-plic + - sophgo,cv1812h-plic - sophgo,sg2042-plic - thead,th1520-plic - const: thead,c900-plic diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml new file mode 100644 index 000000000000..03f31b009085 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-fg.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-fg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Film Grain + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Film Grain (FG) is a Media Data Path 3 (MDP3) component used to add + the film grain according to the AOMedia Video 1 (AV1) standard. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-fg + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14002000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0x14002000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_FG>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml new file mode 100644 index 000000000000..d4609bba6578 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-hdr.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-hdr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 HDR + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + A Media Data Path 3 (MDP3) component used to perform conversion from + High Dynamic Range (HDR) to Standard Dynamic Range (SDR). + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-hdr + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14004000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0x14004000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_HDR>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml index 7032c7e15039..59db8306485b 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml @@ -20,8 +20,14 @@ description: | properties: compatible: - items: - - const: mediatek,mt8183-mdp3-rdma + oneOf: + - enum: + - mediatek,mt8183-mdp3-rdma + - mediatek,mt8195-mdp3-rdma + - mediatek,mt8195-vdo1-rdma + - items: + - const: mediatek,mt8188-vdo1-rdma + - const: mediatek,mt8195-vdo1-rdma reg: maxItems: 1 @@ -45,6 +51,14 @@ properties: include/dt-bindings/gce/<chip>-gce.h of each chips. $ref: /schemas/types.yaml#/definitions/uint32-array + mediatek,scp: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the System Control Processor (SCP) used for initializing + and stopping the MDP3, for sending frame data locations to the MDP3's + VPU and to install Inter-Processor Interrupt handlers to control + processing states. + power-domains: maxItems: 1 @@ -52,6 +66,7 @@ properties: items: - description: RDMA clock - description: RSZ clock + minItems: 1 iommus: maxItems: 1 @@ -60,16 +75,72 @@ properties: items: - description: used for 1st data pipe from RDMA - description: used for 2nd data pipe from RDMA + - description: used for 3rd data pipe from RDMA + - description: used for 4th data pipe from RDMA + - description: used for the data pipe from SPLIT + minItems: 1 + + interrupts: + maxItems: 1 + + '#dma-cells': + const: 1 required: - compatible - reg - mediatek,gce-client-reg - - mediatek,gce-events - power-domains - clocks - iommus - - mboxes + - '#dma-cells' + +allOf: + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mdp3-rdma + + then: + properties: + clocks: + minItems: 2 + + mboxes: + minItems: 2 + + required: + - mboxes + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-mdp3-rdma + + then: + properties: + clocks: + maxItems: 1 + + mboxes: + minItems: 5 + + required: + - mediatek,gce-events + + - if: + properties: + compatible: + contains: + const: mediatek,mt8195-vdo1-rdma + + then: + properties: + clocks: + maxItems: 1 additionalProperties: false @@ -80,16 +151,17 @@ examples: #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/memory/mt8183-larb-port.h> - mdp3_rdma0: mdp3-rdma0@14001000 { - compatible = "mediatek,mt8183-mdp3-rdma"; - reg = <0x14001000 0x1000>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; - mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, - <CMDQ_EVENT_MDP_RDMA0_EOF>; - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - clocks = <&mmsys CLK_MM_MDP_RDMA0>, - <&mmsys CLK_MM_MDP_RSZ1>; - iommus = <&iommu>; - mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, - <&gce 21 CMDQ_THR_PRIO_LOWEST>; + dma-controller@14001000 { + compatible = "mediatek,mt8183-mdp3-rdma"; + reg = <0x14001000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, + <CMDQ_EVENT_MDP_RDMA0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MDP_RSZ1>; + iommus = <&iommu>; + mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>, + <&gce 21 CMDQ_THR_PRIO_LOWEST>; + #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml index 78f9de6192ef..f5676bec4326 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml @@ -15,9 +15,13 @@ description: | properties: compatible: - items: + oneOf: - enum: - mediatek,mt8183-mdp3-rsz + - items: + - enum: + - mediatek,mt8195-mdp3-rsz + - const: mediatek,mt8183-mdp3-rsz reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml new file mode 100644 index 000000000000..d815bea29154 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-stitch.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-stitch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 STITCH + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + One of Media Data Path 3 (MDP3) components used to combine multiple video frame + with overlapping fields of view to produce a segmented panorame. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-stitch + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14003000 { + compatible = "mediatek,mt8195-mdp3-stitch"; + reg = <0x14003000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_STITCH>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml new file mode 100644 index 000000000000..14ea556d4f82 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tcc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Tone Curve Conversion + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + +description: + Tone Curve Conversion (TCC) is one of Media Profile Path 3 (MDP3) components. + It is used to handle the tone mapping of various gamma curves in order to + achieve HDR10 effects. This helps adapt the content to the color and + brightness range that standard display devices typically support. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tcc + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@1400b000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0x1400b000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TCC>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml new file mode 100644 index 000000000000..8ab7f2d8e148 --- /dev/null +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-tdshp.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/mediatek,mdp3-tdshp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Media Data Path 3 Two-Dimensional Sharpness + +maintainers: + - Matthias Brugger <matthias.bgg@gmail.com> + - Moudy Ho <moudy.ho@mediatek.com> + +description: + Two-Dimensional Sharpness (TDSHP) is a Media Profile Path 3 (MDP3) component + used to perform image edge sharpening and enhance vividness and contrast. + +properties: + compatible: + enum: + - mediatek,mt8195-mdp3-tdshp + + reg: + maxItems: 1 + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - mediatek,gce-client-reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/gce/mt8195-gce.h> + + display@14007000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0x14007000 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>; + }; diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml index 0baa77198fa2..53a679338402 100644 --- a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml +++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml @@ -15,9 +15,13 @@ description: | properties: compatible: - items: + oneOf: - enum: - mediatek,mt8183-mdp3-wrot + - items: + - enum: + - mediatek,mt8195-mdp3-wrot + - const: mediatek,mt8183-mdp3-wrot reg: maxItems: 1 @@ -50,6 +54,9 @@ properties: iommus: maxItems: 1 + '#dma-cells': + const: 1 + required: - compatible - reg @@ -58,6 +65,7 @@ required: - power-domains - clocks - iommus + - '#dma-cells' additionalProperties: false @@ -68,13 +76,14 @@ examples: #include <dt-bindings/power/mt8183-power.h> #include <dt-bindings/memory/mt8183-larb-port.h> - mdp3_wrot0: mdp3-wrot0@14005000 { - compatible = "mediatek,mt8183-mdp3-wrot"; - reg = <0x14005000 0x1000>; - mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; - mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, - <CMDQ_EVENT_MDP_WROT0_EOF>; - power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - clocks = <&mmsys CLK_MM_MDP_WROT0>; - iommus = <&iommu>; + dma-controller@14005000 { + compatible = "mediatek,mt8183-mdp3-wrot"; + reg = <0x14005000 0x1000>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_MDP_WROT0_SOF>, + <CMDQ_EVENT_MDP_WROT0_EOF>; + power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + iommus = <&iommu>; + #dma-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml index b97b06848729..f154103f32cc 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.yaml @@ -85,7 +85,7 @@ examples: }; i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml index 6ee78a38bd74..5fe65795f796 100644 --- a/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml +++ b/Documentation/devicetree/bindings/mmc/samsung,exynos-dw-mshc.yaml @@ -14,15 +14,22 @@ maintainers: properties: compatible: - enum: - - samsung,exynos4210-dw-mshc - - samsung,exynos4412-dw-mshc - - samsung,exynos5250-dw-mshc - - samsung,exynos5420-dw-mshc - - samsung,exynos5420-dw-mshc-smu - - samsung,exynos7-dw-mshc - - samsung,exynos7-dw-mshc-smu - - axis,artpec8-dw-mshc + oneOf: + - enum: + - axis,artpec8-dw-mshc + - samsung,exynos4210-dw-mshc + - samsung,exynos4412-dw-mshc + - samsung,exynos5250-dw-mshc + - samsung,exynos5420-dw-mshc + - samsung,exynos5420-dw-mshc-smu + - samsung,exynos7-dw-mshc + - samsung,exynos7-dw-mshc-smu + - items: + - enum: + - samsung,exynos5433-dw-mshc-smu + - samsung,exynos7885-dw-mshc-smu + - samsung,exynos850-dw-mshc-smu + - const: samsung,exynos7-dw-mshc-smu reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml index 2162f661ed5a..17a2b927af33 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -29,7 +29,11 @@ properties: - samsung,exynos4210-pwm # 32-bit, Exynos - items: - enum: + - samsung,exynos5433-pwm + - samsung,exynos7-pwm - samsung,exynosautov9-pwm + - samsung,exynosautov920-pwm + - tesla,fsd-pwm - const: samsung,exynos4210-pwm reg: diff --git a/Documentation/devicetree/bindings/riscv/sophgo.yaml b/Documentation/devicetree/bindings/riscv/sophgo.yaml index 86748c5390be..9bc813dad098 100644 --- a/Documentation/devicetree/bindings/riscv/sophgo.yaml +++ b/Documentation/devicetree/bindings/riscv/sophgo.yaml @@ -24,6 +24,10 @@ properties: - const: sophgo,cv1800b - items: - enum: + - sophgo,huashan-pi + - const: sophgo,cv1812h + - items: + - enum: - milkv,pioneer - const: sophgo,sg2042 diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml index d51b236939bf..bf4e11d6dffb 100644 --- a/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.yaml @@ -17,6 +17,11 @@ properties: - samsung,s3c2416-rtc - samsung,s3c2443-rtc - samsung,s3c6410-rtc + - items: + - enum: + - samsung,exynos7-rtc + - samsung,exynos850-rtc + - const: samsung,s3c6410-rtc - const: samsung,exynos3250-rtc deprecated: true diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index ac60ab1e35e3..4b6fc82c2edf 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -18,9 +18,6 @@ description: |+ properties: compatible: oneOf: - - items: - - const: samsung,exynosautov9-uart - - const: samsung,exynos850-uart - enum: - apple,s5l-uart - axis,artpec8-uart @@ -29,6 +26,20 @@ properties: - samsung,exynos4210-uart - samsung,exynos5433-uart - samsung,exynos850-uart + - items: + - enum: + - samsung,exynos7-uart + - tesla,fsd-uart + - const: samsung,exynos4210-uart + - items: + - enum: + - samsung,exynos7885-uart + - const: samsung,exynos5433-uart + - items: + - enum: + - samsung,exynosautov9-uart + - samsung,exynosautov920-uart + - const: samsung,exynos850-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml index 16977e4e4357..c6bce40946d4 100644 --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml @@ -158,3 +158,36 @@ examples: }; }; }; + + - | + system-controller@ff63c000 { + compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon"; + reg = <0xff63c000 0x400>; + + clock-controller { + compatible = "amlogic,axg-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + + power-controller { + compatible = "amlogic,meson-axg-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + + resets = <&reset_viu>, + <&reset_venc>, + <&reset_vcbus>, + <&reset_vencl>, + <&reset_vid_lock>; + reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock"; + clocks = <&clk_vpu>, <&clk_vapb>; + clock-names = "vpu", "vapb"; + }; + + phy { + compatible = "amlogic,axg-mipi-pcie-analog-phy"; + #phy-cells = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml index a06ac2177444..4737e5f45d54 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml @@ -41,7 +41,6 @@ properties: - mediatek,mt8173-pwrap - mediatek,mt8183-pwrap - mediatek,mt8186-pwrap - - mediatek,mt8188-pwrap - mediatek,mt8195-pwrap - mediatek,mt8365-pwrap - mediatek,mt8516-pwrap @@ -50,6 +49,11 @@ properties: - mediatek,mt8186-pwrap - mediatek,mt8195-pwrap - const: syscon + - items: + - enum: + - mediatek,mt8188-pwrap + - const: mediatek,mt8195-pwrap + - const: syscon reg: minItems: 1 diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml index 7eda63d5682f..742b91d1d28e 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml @@ -22,8 +22,10 @@ properties: compatible: enum: - mediatek,mt8183-svs + - mediatek,mt8186-svs - mediatek,mt8188-svs - mediatek,mt8192-svs + - mediatek,mt8195-svs reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index 1309bf5ae0cd..9793ea6f0fe6 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -28,6 +28,8 @@ properties: - rockchip,rk3588-sys-grf - rockchip,rk3588-pcie3-phy-grf - rockchip,rk3588-pcie3-pipe-grf + - rockchip,rk3588-vo-grf + - rockchip,rk3588-vop-grf - rockchip,rv1108-usbgrf - const: syscon - items: diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml index e1d716df5dfa..15fcd8f1d8bc 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml @@ -15,6 +15,7 @@ select: compatible: contains: enum: + - google,gs101-pmu - samsung,exynos3250-pmu - samsung,exynos4210-pmu - samsung,exynos4212-pmu @@ -35,6 +36,7 @@ properties: oneOf: - items: - enum: + - google,gs101-pmu - samsung,exynos3250-pmu - samsung,exynos4210-pmu - samsung,exynos4212-pmu @@ -50,6 +52,14 @@ properties: - const: syscon - items: - enum: + - samsung,exynos7885-pmu + - samsung,exynosautov9-pmu + - samsung,exynosautov920-pmu + - tesla,fsd-pmu + - const: samsung,exynos7-pmu + - const: syscon + - items: + - enum: - samsung,exynos3250-pmu - samsung,exynos4210-pmu - samsung,exynos4212-pmu diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml index a6836904a4f8..61be1f2ddbe7 100644 --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml @@ -24,7 +24,9 @@ properties: compatible: oneOf: - items: - - const: samsung,exynosautov9-usi + - enum: + - samsung,exynosautov9-usi + - samsung,exynosautov920-usi - const: samsung,exynos850-usi - enum: - samsung,exynos850-usi @@ -155,7 +157,7 @@ examples: }; hsi2c_0: i2c@13820000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", "samsung,exynosautov9-hsi2c"; reg = <0x13820000 0xc0>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml index 163e912e9cad..1794e3799f21 100644 --- a/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml +++ b/Documentation/devicetree/bindings/soc/samsung/samsung,exynos-sysreg.yaml @@ -14,9 +14,14 @@ properties: oneOf: - items: - enum: + - google,gs101-apm-sysreg + - google,gs101-peric0-sysreg + - google,gs101-peric1-sysreg - samsung,exynos3-sysreg - samsung,exynos4-sysreg - samsung,exynos5-sysreg + - samsung,exynosautov920-peric0-sysreg + - samsung,exynosautov920-peric1-sysreg - tesla,fsd-cam-sysreg - tesla,fsd-fsys0-sysreg - tesla,fsd-fsys1-sysreg diff --git a/Documentation/devicetree/bindings/arm/xilinx.yaml b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml index f57ed0347894..d4c0fe1fe435 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.yaml +++ b/Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: http://devicetree.org/schemas/arm/xilinx.yaml# +$id: http://devicetree.org/schemas/soc/xilinx/xilinx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Xilinx Zynq Platforms @@ -132,6 +132,11 @@ properties: - const: xlnx,zynqmp-smk-k26 - const: xlnx,zynqmp + - description: AMD MicroBlaze V (QEMU) + items: + - const: qemu,mbv + - const: amd,mbv + additionalProperties: true ... diff --git a/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml b/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml new file mode 100644 index 000000000000..45382c4d86aa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mediatek,mt2701-audio.yaml @@ -0,0 +1,116 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mediatek,mt2701-audio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Audio Front End (AFE) PCM controller for mt2701 + +description: + The AFE PCM node must be a subnode of the MediaTek audsys device tree node. + +maintainers: + - Eugen Hristev <eugen.hristev@collabora.com> + +properties: + compatible: + enum: + - mediatek,mt2701-audio + - mediatek,mt7622-audio + + interrupts: + items: + - description: AFE interrupt + - description: ASYS interrupt + + interrupt-names: + items: + - const: afe + - const: asys + + power-domains: + maxItems: 1 + + clocks: + items: + - description: audio infra sys clock + - description: top audio mux 1 + - description: top audio mux 2 + - description: top audio sys a1 clock + - description: top audio sys a2 clock + - description: i2s0 source selection + - description: i2s1 source selection + - description: i2s2 source selection + - description: i2s3 source selection + - description: i2s0 source divider + - description: i2s1 source divider + - description: i2s2 source divider + - description: i2s3 source divider + - description: i2s0 master clock + - description: i2s1 master clock + - description: i2s2 master clock + - description: i2s3 master clock + - description: i2so0 hopping clock + - description: i2so1 hopping clock + - description: i2so2 hopping clock + - description: i2so3 hopping clock + - description: i2si0 hopping clock + - description: i2si1 hopping clock + - description: i2si2 hopping clock + - description: i2si3 hopping clock + - description: asrc0 output clock + - description: asrc1 output clock + - description: asrc2 output clock + - description: asrc3 output clock + - description: audio front end pd clock + - description: audio front end conn pd clock + - description: top audio a1 sys pd + - description: top audio a2 sys pd + - description: audio merge interface pd + + clock-names: + items: + - const: infra_sys_audio_clk + - const: top_audio_mux1_sel + - const: top_audio_mux2_sel + - const: top_audio_a1sys_hp + - const: top_audio_a2sys_hp + - const: i2s0_src_sel + - const: i2s1_src_sel + - const: i2s2_src_sel + - const: i2s3_src_sel + - const: i2s0_src_div + - const: i2s1_src_div + - const: i2s2_src_div + - const: i2s3_src_div + - const: i2s0_mclk_en + - const: i2s1_mclk_en + - const: i2s2_mclk_en + - const: i2s3_mclk_en + - const: i2so0_hop_ck + - const: i2so1_hop_ck + - const: i2so2_hop_ck + - const: i2so3_hop_ck + - const: i2si0_hop_ck + - const: i2si1_hop_ck + - const: i2si2_hop_ck + - const: i2si3_hop_ck + - const: asrc0_out_ck + - const: asrc1_out_ck + - const: asrc2_out_ck + - const: asrc3_out_ck + - const: audio_afe_pd + - const: audio_afe_conn_pd + - const: audio_a1sys_pd + - const: audio_a2sys_pd + - const: audio_mrgif_pd + +required: + - compatible + - interrupts + - interrupt-names + - power-domains + - clocks + - clock-names + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt deleted file mode 100644 index f548e6a58240..000000000000 --- a/Documentation/devicetree/bindings/sound/mt2701-afe-pcm.txt +++ /dev/null @@ -1,146 +0,0 @@ -Mediatek AFE PCM controller for mt2701 - -Required properties: -- compatible: should be one of the following. - - "mediatek,mt2701-audio" - - "mediatek,mt7622-audio" -- interrupts: should contain AFE and ASYS interrupts -- interrupt-names: should be "afe" and "asys" -- power-domains: should define the power domain -- clocks: Must contain an entry for each entry in clock-names - See ../clocks/clock-bindings.txt for details -- clock-names: should have these clock names: - "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_a1sys_hp", - "top_audio_a2sys_hp", - "i2s0_src_sel", - "i2s1_src_sel", - "i2s2_src_sel", - "i2s3_src_sel", - "i2s0_src_div", - "i2s1_src_div", - "i2s2_src_div", - "i2s3_src_div", - "i2s0_mclk_en", - "i2s1_mclk_en", - "i2s2_mclk_en", - "i2s3_mclk_en", - "i2so0_hop_ck", - "i2so1_hop_ck", - "i2so2_hop_ck", - "i2so3_hop_ck", - "i2si0_hop_ck", - "i2si1_hop_ck", - "i2si2_hop_ck", - "i2si3_hop_ck", - "asrc0_out_ck", - "asrc1_out_ck", - "asrc2_out_ck", - "asrc3_out_ck", - "audio_afe_pd", - "audio_afe_conn_pd", - "audio_a1sys_pd", - "audio_a2sys_pd", - "audio_mrgif_pd"; -- assigned-clocks: list of input clocks and dividers for the audio system. - See ../clocks/clock-bindings.txt for details. -- assigned-clocks-parents: parent of input clocks of assigned clocks. -- assigned-clock-rates: list of clock frequencies of assigned clocks. - -Must be a subnode of MediaTek audsys device tree node. -See ../arm/mediatek/mediatek,audsys.txt for details about the parent node. - -Example: - - audsys: audio-subsystem@11220000 { - compatible = "mediatek,mt2701-audsys", "syscon"; - ... - - afe: audio-controller { - compatible = "mediatek,mt2701-audio"; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "afe", "asys"; - power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; - - clocks = <&infracfg CLK_INFRA_AUDIO>, - <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_48K_TIMING>, - <&topckgen CLK_TOP_AUD_44K_TIMING>, - <&topckgen CLK_TOP_AUD_K1_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K2_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K3_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K4_SRC_SEL>, - <&topckgen CLK_TOP_AUD_K1_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K2_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K3_SRC_DIV>, - <&topckgen CLK_TOP_AUD_K4_SRC_DIV>, - <&topckgen CLK_TOP_AUD_I2S1_MCLK>, - <&topckgen CLK_TOP_AUD_I2S2_MCLK>, - <&topckgen CLK_TOP_AUD_I2S3_MCLK>, - <&topckgen CLK_TOP_AUD_I2S4_MCLK>, - <&audsys CLK_AUD_I2SO1>, - <&audsys CLK_AUD_I2SO2>, - <&audsys CLK_AUD_I2SO3>, - <&audsys CLK_AUD_I2SO4>, - <&audsys CLK_AUD_I2SIN1>, - <&audsys CLK_AUD_I2SIN2>, - <&audsys CLK_AUD_I2SIN3>, - <&audsys CLK_AUD_I2SIN4>, - <&audsys CLK_AUD_ASRCO1>, - <&audsys CLK_AUD_ASRCO2>, - <&audsys CLK_AUD_ASRCO3>, - <&audsys CLK_AUD_ASRCO4>, - <&audsys CLK_AUD_AFE>, - <&audsys CLK_AUD_AFE_CONN>, - <&audsys CLK_AUD_A1SYS>, - <&audsys CLK_AUD_A2SYS>, - <&audsys CLK_AUD_AFE_MRGIF>; - - clock-names = "infra_sys_audio_clk", - "top_audio_mux1_sel", - "top_audio_mux2_sel", - "top_audio_a1sys_hp", - "top_audio_a2sys_hp", - "i2s0_src_sel", - "i2s1_src_sel", - "i2s2_src_sel", - "i2s3_src_sel", - "i2s0_src_div", - "i2s1_src_div", - "i2s2_src_div", - "i2s3_src_div", - "i2s0_mclk_en", - "i2s1_mclk_en", - "i2s2_mclk_en", - "i2s3_mclk_en", - "i2so0_hop_ck", - "i2so1_hop_ck", - "i2so2_hop_ck", - "i2so3_hop_ck", - "i2si0_hop_ck", - "i2si1_hop_ck", - "i2si2_hop_ck", - "i2si3_hop_ck", - "asrc0_out_ck", - "asrc1_out_ck", - "asrc2_out_ck", - "asrc3_out_ck", - "audio_afe_pd", - "audio_afe_conn_pd", - "audio_a1sys_pd", - "audio_a2sys_pd", - "audio_mrgif_pd"; - - assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>, - <&topckgen CLK_TOP_AUD_MUX2_SEL>, - <&topckgen CLK_TOP_AUD_MUX1_DIV>, - <&topckgen CLK_TOP_AUD_MUX2_DIV>; - assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>, - <&topckgen CLK_TOP_AUD2PLL_90M>; - assigned-clock-rates = <0>, <0>, <49152000>, <45158400>; - }; - }; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml index 30b3b6e9824b..f45f73b5056d 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -44,13 +44,18 @@ properties: frequencies supported by Exynos7 I2S and 7.1 channel TDM support for playback and capture TDM (Time division multiplexing) to allow transfer of multiple channel audio data on single data line. - enum: - - samsung,s3c6410-i2s - - samsung,s5pv210-i2s - - samsung,exynos5420-i2s - - samsung,exynos7-i2s - - samsung,exynos7-i2s1 - - tesla,fsd-i2s + oneOf: + - enum: + - samsung,s3c6410-i2s + - samsung,s5pv210-i2s + - samsung,exynos5420-i2s + - samsung,exynos7-i2s + - samsung,exynos7-i2s1 + - tesla,fsd-i2s + - items: + - enum: + - samsung,exynos5433-i2s + - const: samsung,exynos7-i2s '#address-cells': const: 1 diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index e8be6c470364..4b6c20fc8194 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -38,6 +38,7 @@ properties: - enum: - allwinner,sun20i-d1-clint - sophgo,cv1800b-clint + - sophgo,cv1812h-clint - thead,th1520-clint - const: thead,c900-clint - items: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 309b94c328c8..8f03e85be90a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -294,6 +294,8 @@ patternProperties: description: CompuLab Ltd. "^congatec,.*": description: congatec GmbH + "^coolpi,.*": + description: cool-pi.com "^coreriver,.*": description: CORERIVER Semiconductor Co.,Ltd. "^corpro,.*": @@ -352,6 +354,8 @@ patternProperties: description: Digi International Inc. "^digilent,.*": description: Diglent, Inc. + "^dimonoff,.*": + description: Dimonoff inc. "^diodes,.*": description: Diodes, Inc. "^dioo,.*": @@ -597,6 +601,8 @@ patternProperties: description: Hewlett Packard Enterprise "^hsg,.*": description: HannStar Display Co. + "^htc,.*": + description: HTC Corporation "^huawei,.*": description: Huawei Technologies Co., Ltd. "^hugsun,.*": @@ -1179,6 +1185,8 @@ patternProperties: description: Shenzhen Roofull Technology Co, Ltd "^roseapplepi,.*": description: RoseapplePi.org + "^rve,.*": + description: Recharge Véhicule Électrique (RVE) inc. "^saef,.*": description: Saef Technology Limited "^samsung,.*": @@ -1434,6 +1442,8 @@ patternProperties: description: TPO "^tq,.*": description: TQ-Systems GmbH + "^transpeed,.*": + description: Transpeed "^traverse,.*": description: Traverse Technologies Australia Pty Ltd "^tronfy,.*": diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml index 8fb6656ba0c2..ea2d206b05ab 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml @@ -16,14 +16,19 @@ description: |+ properties: compatible: - enum: - - samsung,s3c2410-wdt # for S3C2410 - - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4 - - samsung,exynos5250-wdt # for Exynos5250 - - samsung,exynos5420-wdt # for Exynos5420 - - samsung,exynos7-wdt # for Exynos7 - - samsung,exynos850-wdt # for Exynos850 - - samsung,exynosautov9-wdt # for Exynosautov9 + oneOf: + - enum: + - samsung,s3c2410-wdt # for S3C2410 + - samsung,s3c6410-wdt # for S3C6410, S5PV210 and Exynos4 + - samsung,exynos5250-wdt # for Exynos5250 + - samsung,exynos5420-wdt # for Exynos5420 + - samsung,exynos7-wdt # for Exynos7 + - samsung,exynos850-wdt # for Exynos850 + - samsung,exynosautov9-wdt # for Exynosautov9 + - items: + - enum: + - tesla,fsd-wdt + - const: samsung,exynos7-wdt reg: maxItems: 1 diff --git a/MAINTAINERS b/MAINTAINERS index c36618d4659e..ffb34270d645 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2321,8 +2321,7 @@ F: arch/arm/boot/dts/marvell/armada* F: arch/arm/boot/dts/marvell/kirkwood* F: arch/arm/configs/mvebu_*_defconfig F: arch/arm/mach-mvebu/ -F: arch/arm64/boot/dts/marvell/armada* -F: arch/arm64/boot/dts/marvell/cn913* +F: arch/arm64/boot/dts/marvell/ F: drivers/clk/mvebu/ F: drivers/cpufreq/armada-37xx-cpufreq.c F: drivers/cpufreq/armada-8k-cpufreq.c @@ -3008,6 +3007,7 @@ F: Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml F: Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml F: Documentation/devicetree/bindings/memory-controllers/snps,dw-umctl2-ddrc.yaml F: Documentation/devicetree/bindings/memory-controllers/xlnx,zynq-ddrc-a05.yaml +F: Documentation/devicetree/bindings/soc/xilinx/xilinx.yaml F: Documentation/devicetree/bindings/spi/xlnx,zynq-qspi.yaml F: arch/arm/mach-zynq/ F: drivers/clocksource/timer-cadence-ttc.c @@ -9001,6 +9001,16 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux.git F: drivers/firmware/google/ +GOOGLE TENSOR SoC SUPPORT +M: Peter Griffin <peter.griffin@linaro.org> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/clock/google,gs101-clock.yaml +F: arch/arm64/boot/dts/exynos/google/ +F: drivers/clk/samsung/clk-gs101.c +F: include/dt-bindings/clock/google,gs101.h + GPD POCKET FAN DRIVER M: Hans de Goede <hdegoede@redhat.com> L: platform-driver-x86@vger.kernel.org diff --git a/arch/arm/boot/dts/broadcom/bcm63138.dtsi b/arch/arm/boot/dts/broadcom/bcm63138.dtsi index 93281c47c9ba..4ef02283612b 100644 --- a/arch/arm/boot/dts/broadcom/bcm63138.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm63138.dtsi @@ -232,6 +232,12 @@ interrupt-names = "nand"; }; + serial@4400 { + compatible = "brcm,bcm63138-hs-uart", "brcm,bcmbca-hs-uart"; + reg = <0x4400 0x1e0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + }; + bootlut: bootlut@8000 { compatible = "brcm,bcm63138-bootlut"; reg = <0x8000 0x50>; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts index 90fd51b36e7d..2c89db34c8d8 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-usrobotics-usr8200.dts @@ -165,6 +165,24 @@ #address-cells = <1>; #size-cells = <0>; + /* + * PHY 0..4 are internal to the MV88E6060 switch but appear + * as independent devices. + */ + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + + /* Altima AMI101L used by the WAN port */ phy9: ethernet-phy@9 { reg = <9>; }; @@ -181,21 +199,25 @@ port@0 { reg = <0>; label = "lan1"; + phy-handle = <&phy0>; }; port@1 { reg = <1>; label = "lan2"; + phy-handle = <&phy1>; }; port@2 { reg = <2>; label = "lan3"; + phy-handle = <&phy2>; }; port@3 { reg = <3>; label = "lan4"; + phy-handle = <&phy3>; }; port@5 { diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi index 4c1d140f40f8..35be14150f41 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga.dtsi @@ -768,7 +768,7 @@ status = "disabled"; }; - nand0: nand@ff900000 { + nand0: nand-controller@ff900000 { #address-cells = <0x1>; #size-cells = <0x0>; compatible = "altr,socfpga-denali-nand"; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi index f36063c57c7f..6b6e77596ffa 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10.dtsi @@ -669,7 +669,7 @@ status = "disabled"; }; - nand: nand@ffb90000 { + nand: nand-controller@ffb90000 { #address-cells = <1>; #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts index 11ccdc6c2dc6..0434f1c7b665 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_qspi.dts @@ -17,8 +17,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <3>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts index c48385702a85..7342f5942b0d 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_arria5_socdk.dts @@ -124,8 +124,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts index c7f5fa0ba0f2..d37a982e8571 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_socdk.dts @@ -129,8 +129,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts index 3dd99c7c95e0..9e4db7407f1a 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sockit.dts @@ -174,8 +174,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts index 2564671fc1c6..ce0d6514eeb5 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts @@ -121,8 +121,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts index e0630b0eed03..65f390bf8975 100644 --- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_vining_fpga.dts @@ -229,8 +229,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; @@ -246,8 +244,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <4>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm/boot/dts/marvell/armada-370-rd.dts b/arch/arm/boot/dts/marvell/armada-370-rd.dts index b459a670f615..f23f6b3fc8f3 100644 --- a/arch/arm/boot/dts/marvell/armada-370-rd.dts +++ b/arch/arm/boot/dts/marvell/armada-370-rd.dts @@ -95,7 +95,7 @@ gpio-fan { compatible = "gpio-fan"; gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 3000 1>; + gpio-fan,speed-map = <0 0>, <3000 1>; pinctrl-0 = <&fan_pins>; pinctrl-names = "default"; }; @@ -149,39 +149,37 @@ }; }; - switch: switch@10 { + switch: ethernet-switch@10 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0x10>; interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -196,25 +194,25 @@ #address-cells = <1>; #size-cells = <0>; - switchphy0: switchphy@0 { + switchphy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&switch>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy1: switchphy@1 { + switchphy1: ethernet-phy@1 { reg = <1>; interrupt-parent = <&switch>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy2: switchphy@2 { + switchphy2: ethernet-phy@2 { reg = <2>; interrupt-parent = <&switch>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; - switchphy3: switchphy@3 { + switchphy3: ethernet-phy@3 { reg = <3>; interrupt-parent = <&switch>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts index 8dd242e668e6..6ec3dd3337f4 100644 --- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-2bay.dts @@ -25,9 +25,9 @@ gpio-fan { gpio-fan,speed-map = - < 0 3 - 950 2 - 1400 1 - 1800 0>; + < 0 3>, + < 950 2>, + <1400 1>, + <1800 0>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts index 370ca9c43247..3011578a3124 100644 --- a/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts +++ b/arch/arm/boot/dts/marvell/armada-370-seagate-nas-4bay.dts @@ -106,10 +106,10 @@ gpio-fan { gpio-fan,speed-map = - < 0 3 - 800 2 - 1050 1 - 1300 0>; + < 0 3>, + < 800 2>, + <1050 1>, + <1300 0>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts index b07d11d1f124..02599a3e9816 100644 --- a/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/marvell/armada-370-synology-ds213j.dts @@ -113,14 +113,14 @@ &gpio2 0 GPIO_ACTIVE_HIGH &gpio2 1 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 1000 1 - 1150 2 - 1350 4 - 1500 3 - 1650 5 - 1750 6 - 1900 7 >; + gpio-fan,speed-map = < 0 0>, + <1000 1>, + <1150 2>, + <1350 4>, + <1500 3>, + <1650 5>, + <1750 6>, + <1900 7>; }; gpio-leds { diff --git a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts index f4c4b213ef4e..5baf83e5253d 100644 --- a/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts +++ b/arch/arm/boot/dts/marvell/armada-381-netgear-gs110emx.dts @@ -77,51 +77,49 @@ pinctrl-0 = <&mdio_pins>; status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6190"; - #address-cells = <1>; #interrupt-cells = <2>; interrupt-controller; interrupt-parent = <&gpio1>; interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&switch_interrupt_pins>; pinctrl-names = "default"; - #size-cells = <0>; reg = <0>; mdio { #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -142,11 +140,11 @@ }; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { ethernet = <ð0>; phy-mode = "rgmii"; reg = <0>; @@ -158,55 +156,55 @@ }; }; - port@1 { + ethernet-port@1 { label = "lan1"; phy-handle = <&switch0phy1>; reg = <1>; }; - port@2 { + ethernet-port@2 { label = "lan2"; phy-handle = <&switch0phy2>; reg = <2>; }; - port@3 { + ethernet-port@3 { label = "lan3"; phy-handle = <&switch0phy3>; reg = <3>; }; - port@4 { + ethernet-port@4 { label = "lan4"; phy-handle = <&switch0phy4>; reg = <4>; }; - port@5 { + ethernet-port@5 { label = "lan5"; phy-handle = <&switch0phy5>; reg = <5>; }; - port@6 { + ethernet-port@6 { label = "lan6"; phy-handle = <&switch0phy6>; reg = <6>; }; - port@7 { + ethernet-port@7 { label = "lan7"; phy-handle = <&switch0phy7>; reg = <7>; }; - port@8 { + ethernet-port@8 { label = "lan8"; phy-handle = <&switch0phy8>; reg = <8>; }; - port@9 { + ethernet-port@9 { /* 88X3310P external phy */ label = "lan9"; phy-handle = <&phy1>; @@ -214,7 +212,7 @@ reg = <9>; }; - port@a { + ethernet-port@a { /* 88X3310P external phy */ label = "lan10"; phy-handle = <&phy2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts index 1990f7d0cc79..1707d1b01545 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-l8.dts @@ -7,66 +7,66 @@ }; &mdio { - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6190"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cf_gtr_switch_reset_pins>; reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan8"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan7"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan6"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan5"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "lan4"; phy-handle = <&switch0phy4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "lan3"; phy-handle = <&switch0phy5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "lan2"; phy-handle = <&switch0phy6>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "lan1"; phy-handle = <&switch0phy7>; }; - port@10 { + ethernet-port@10 { reg = <10>; phy-mode = "2500base-x"; @@ -83,35 +83,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@1 { + switch0phy0: ethernet-phy@1 { reg = <0x1>; }; - switch0phy1: switch0phy1@2 { + switch0phy1: ethernet-phy@2 { reg = <0x2>; }; - switch0phy2: switch0phy2@3 { + switch0phy2: ethernet-phy@3 { reg = <0x3>; }; - switch0phy3: switch0phy3@4 { + switch0phy3: ethernet-phy@4 { reg = <0x4>; }; - switch0phy4: switch0phy4@5 { + switch0phy4: ethernet-phy@5 { reg = <0x5>; }; - switch0phy5: switch0phy5@6 { + switch0phy5: ethernet-phy@6 { reg = <0x6>; }; - switch0phy6: switch0phy6@7 { + switch0phy6: ethernet-phy@7 { reg = <0x7>; }; - switch0phy7: switch0phy7@8 { + switch0phy7: ethernet-phy@8 { reg = <0x8>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts index b795ad573891..a7678a784c18 100644 --- a/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts +++ b/arch/arm/boot/dts/marvell/armada-385-clearfog-gtr-s4.dts @@ -11,42 +11,42 @@ }; &mdio { - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cf_gtr_switch_reset_pins>; reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "2500base-x"; ethernet = <ð1>; @@ -63,19 +63,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi index fc8216fd9f60..4116ed60f709 100644 --- a/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/marvell/armada-385-linksys.dtsi @@ -158,42 +158,40 @@ &mdio { status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "wan"; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "sgmii"; ethernet = <ð2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts index ea91ff964d94..6caa5c50175a 100644 --- a/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts +++ b/arch/arm/boot/dts/marvell/armada-385-synology-ds116.dts @@ -131,14 +131,14 @@ gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>, <&gpio1 17 GPIO_ACTIVE_HIGH>, <&gpio1 16 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 1500 1 - 2500 2 - 3000 3 - 3400 4 - 3700 5 - 3900 6 - 4000 7>; + gpio-fan,speed-map = < 0 0>, + <1500 1>, + <2500 2>, + <3000 3>, + <3400 4>, + <3700 5>, + <3900 6>, + <4000 7>; #cooling-cells = <2>; }; diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 2d8d319bec83..7b755bb4e4e7 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -435,12 +435,10 @@ }; /* Switch MV88E6176 at address 0x10 */ - switch@10 { + ethernet-switch@10 { pinctrl-names = "default"; pinctrl-0 = <&swint_pins>; compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; dsa,member = <0 0>; reg = <0x10>; @@ -448,36 +446,36 @@ interrupt-parent = <&gpio1>; interrupts = <13 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - ports@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; }; - ports@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; }; - ports@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - ports@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; }; - ports@4 { + ethernet-port@4 { reg = <4>; label = "lan4"; }; - ports@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "rgmii-id"; @@ -488,7 +486,7 @@ }; }; - ports@6 { + ethernet-port@6 { reg = <6>; ethernet = <ð0>; phy-mode = "rgmii-id"; diff --git a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts index 32c569df142f..3290ccad2374 100644 --- a/arch/arm/boot/dts/marvell/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/marvell/armada-388-clearfog.dts @@ -92,44 +92,42 @@ &mdio { status = "okay"; - switch@4 { + ethernet-switch@4 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <4>; pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; pinctrl-names = "default"; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan5"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan4"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan3"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan2"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan1"; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <ð1>; phy-mode = "1000base-x"; @@ -140,7 +138,7 @@ }; }; - port@6 { + ethernet-port@6 { /* 88E1512 external phy */ reg = <6>; label = "lan6"; diff --git a/arch/arm/boot/dts/marvell/armada-388-gp.dts b/arch/arm/boot/dts/marvell/armada-388-gp.dts index e2ba50520b6b..1de0a172aa5f 100644 --- a/arch/arm/boot/dts/marvell/armada-388-gp.dts +++ b/arch/arm/boot/dts/marvell/armada-388-gp.dts @@ -237,8 +237,8 @@ gpio-fan { compatible = "gpio-fan"; gpios = <&expander1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 3000 1>; + gpio-fan,speed-map = < 0 0>, + <3000 1>; }; }; diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts index 7a0614fd0c93..ea859f7ea042 100644 --- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts @@ -265,42 +265,40 @@ &mdio { status = "okay"; - switch@0 { + ethernet-switch@0 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "internet"; }; - port@5 { + ethernet-port@5 { reg = <5>; phy-mode = "rgmii-id"; ethernet = <ð0>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi index eb917462b219..0738eb679fcd 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi @@ -38,9 +38,9 @@ pinctrl-names = "default"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH &gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 3000 1 - 6000 2>; + gpio-fan,speed-map = <0 0>, + <3000 1>, + <6000 2>; }; gpio_poweroff { diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi index 377b6e970259..dfac2045a1eb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-6282.dtsi @@ -118,10 +118,11 @@ gpios = <&gpio0 17 GPIO_ACTIVE_LOW &gpio0 16 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; + gpio-fan,speed-map = + < 0 3>, + <1500 2>, + <3250 1>, + <5000 0>; alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts index c6024b569423..0425df8cb91c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation-lswxl.dts @@ -69,10 +69,11 @@ gpios = <&gpio1 16 GPIO_ACTIVE_LOW &gpio1 15 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; + gpio-fan,speed-map = + < 0 3>, + <1500 2>, + <3250 1>, + <5000 0>; alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi index 88b70ba1c8fe..f80af24b9e90 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi @@ -172,10 +172,11 @@ pinctrl-names = "default"; gpios = <&gpio0 19 GPIO_ACTIVE_LOW &gpio0 18 GPIO_ACTIVE_LOW>; - gpio-fan,speed-map = <0 3 - 1500 2 - 3250 1 - 5000 0>; + gpio-fan,speed-map = + <0 3>, + <1500 2>, + <3250 1>, + <5000 0>; alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts index c0a087e77408..044958bc55da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2max.dts @@ -29,15 +29,15 @@ &gpio1 1 GPIO_ACTIVE_LOW &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = - < 0 0 - 1500 15 - 1700 14 - 1800 13 - 2100 12 - 3100 11 - 3300 10 - 4300 9 - 5500 8>; + < 0 0>, + <1500 15>, + <1700 14>, + <1800 13>, + <2100 12>, + <3100 11>, + <3300 10>, + <4300 9>, + <5500 8>; alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts index 5b9fa14b6428..3fbe008f9141 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2mini.dts @@ -30,15 +30,15 @@ &gpio1 1 GPIO_ACTIVE_LOW &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = - < 0 0 - 3000 15 - 3180 14 - 4140 13 - 4570 12 - 6760 11 - 7140 10 - 7980 9 - 9200 8>; + < 0 0>, + <3000 15>, + <3180 14>, + <4140 13>, + <4570 12>, + <6760 11>, + <7140 10>, + <7980 9>, + <9200 8>; alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi index 9b6666020cdd..20964eb48fd7 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi @@ -286,14 +286,15 @@ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH &gpio1 1 GPIO_ACTIVE_HIGH &gpio1 2 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; + gpio-fan,speed-map = + < 0 0>, + <2200 1>, + <2500 2>, + <3000 4>, + <3300 3>, + <3700 5>, + <3800 6>, + <4200 7>; }; gpio-fan-150-15-18 { @@ -306,14 +307,15 @@ &gpio0 16 GPIO_ACTIVE_HIGH &gpio0 17 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2200 1 - 2500 2 - 3000 4 - 3300 3 - 3700 5 - 3800 6 - 4200 7 >; + gpio-fan,speed-map = + < 0 0>, + <2200 1>, + <2500 2>, + <3000 4>, + <3300 3>, + <3700 5>, + <3800 6>, + <4200 7>; }; gpio-fan-100-32-35 { @@ -326,14 +328,15 @@ &gpio1 1 GPIO_ACTIVE_HIGH &gpio1 2 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-fan-100-15-18 { @@ -346,14 +349,15 @@ &gpio0 16 GPIO_ACTIVE_HIGH &gpio0 17 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-fan-100-15-35-1 { @@ -366,14 +370,15 @@ &gpio0 16 GPIO_ACTIVE_HIGH &gpio0 17 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-fan-100-15-35-3 { @@ -388,14 +393,15 @@ alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH &gpio1 12 GPIO_ACTIVE_HIGH &gpio1 13 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = < 0 0 - 2500 1 - 3100 2 - 3800 3 - 4600 4 - 4800 5 - 4900 6 - 5000 7 >; + gpio-fan,speed-map = + < 0 0>, + <2500 1>, + <3100 2>, + <3800 3>, + <4600 4>, + <4800 5>, + <4900 6>, + <5000 7>; }; gpio-leds-alarm-12 { diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi index e172029a0c4d..a260c42dbda3 100644 --- a/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi +++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-fan.dtsi @@ -50,10 +50,10 @@ pinctrl-names = "default"; gpio-fan,speed-map = - <0 3 - 1500 2 - 3250 1 - 5000 0>; + < 0 3>, + <1500 2>, + <3250 1>, + <5000 0>; }; }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts index 83372c1f291b..c6fbdd29019f 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60_curiosity.dts @@ -249,6 +249,8 @@ ethernet-phy@0 { reg = <0x0>; + interrupt-parent = <&pioB>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -353,6 +355,7 @@ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; diff --git a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts index 5cd593028aff..f3cbb675cea4 100644 --- a/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sam9x60ek.dts @@ -292,6 +292,8 @@ ethernet-phy@0 { reg = <0x0>; + interrupt-parent = <&pioB>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -465,6 +467,7 @@ AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB5 periph A */ AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB6 periph A */ AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB7 periph A */ + AT91_PIOB 8 AT91_PERIPH_GPIO AT91_PINCTRL_NONE /* PB8 IRQ GPIO */ AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB9 periph A */ AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A */ }; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts index d0a6dbd377df..f3ffb8f01d8a 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_som1_ek.dts @@ -54,7 +54,6 @@ sdmmc0: sdio-host@a0000000 { bus-width = <8>; - mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index e055b9e2fe34..15239834d886 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -197,7 +197,6 @@ &sdmmc0 { bus-width = <4>; - mmc-ddr-3_3v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts index 5833fb6f15d8..2c817c4a4c68 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts +++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts @@ -65,7 +65,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <4>; diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts index 1f11e9542a72..e66eef87a7a4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts +++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts @@ -45,7 +45,7 @@ pinctrl-0 = <&pinctrl_weim>; status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi index e312f1e74e2f..1ac10965fdfd 100644 --- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi @@ -68,7 +68,7 @@ interrupt-parent = <&aitc>; ranges; - aipi@200000 { + bus@200000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -155,7 +155,7 @@ }; }; - aipi@210000 { + bus@210000 { compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -268,9 +268,12 @@ status = "disabled"; }; - esram: esram@300000 { + esram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x20000>; + ranges = <0 0x00300000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi index 0703f62d10d1..93a6e4e680b4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi @@ -27,7 +27,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts index fc8a502fc957..6cddb2cc36fe 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&qvga_timings>; - qvga_timings: 320x240 { + qvga_timings: timing0 { clock-frequency = <6500000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts index 80a7f96de4c6..64b2ffac463b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&dvi_svga_timings>; - dvi_svga_timings: 800x600 { + dvi_svga_timings: timing0 { clock-frequency = <40000000>; hactive = <800>; vactive = <600>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts index 24027a1fb46d..fb074bfdaa8d 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -16,7 +16,7 @@ bus-width = <18>; display-timings { native-mode = <&dvi_vga_timings>; - dvi_vga_timings: 640x480 { + dvi_vga_timings: timing0 { clock-frequency = <31250000>; hactive = <640>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts index 04f4b127a172..dd176fb54e58 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts @@ -68,7 +68,7 @@ bus-width = <18>; display-timings { native-mode = <&wvga_timings>; - wvga_timings: 640x480 { + wvga_timings: timing0 { hactive = <640>; vactive = <480>; hback-porch = <45>; @@ -122,6 +122,7 @@ codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; clocks = <&clks 129>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi index 534c70b8d79d..9cfff2151b7e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi @@ -68,6 +68,16 @@ }; }; + usbphy0: usb-phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + usbphy1: usb-phy1 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -93,7 +103,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f80000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <3>; status = "disabled"; }; @@ -104,7 +114,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f84000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <10>; status = "disabled"; }; @@ -151,7 +161,7 @@ compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; reg = <0x43f98000 0x4000>; clocks = <&clks 48>; - clock-names = ""; + clock-names = "ipg"; interrupts = <4>; status = "disabled"; }; @@ -178,12 +188,9 @@ }; kpp: kpp@43fa8000 { - #address-cells = <1>; - #size-cells = <0>; compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; clocks = <&clks 102>; - clock-names = ""; interrupts = <24>; status = "disabled"; }; @@ -542,7 +549,7 @@ }; iim: efuse@53ff0000 { - compatible = "fsl,imx25-iim", "fsl,imx27-iim"; + compatible = "fsl,imx25-iim"; reg = <0x53ff0000 0x4000>; interrupts = <19>; clocks = <&clks 99>; @@ -597,7 +604,7 @@ #size-cells = <1>; }; - emi@80000000 { + bus@80000000 { compatible = "fsl,emi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -617,22 +624,4 @@ }; }; }; - - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usb-phy@0 { - reg = <0>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - usbphy1: usb-phy@1 { - reg = <1>; - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts index a21f1f7c24b8..849306cb4532 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts @@ -16,7 +16,7 @@ fsl,pcr = <0xfae80083>; /* non-standard but required */ display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing0 { clock-frequency = <33000033>; hactive = <800>; vactive = <480>; @@ -47,7 +47,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_leds>; - user { + led-user { label = "Heartbeat"; gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi index 74110bbcd9d4..c7e923584878 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi @@ -33,7 +33,7 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -90,7 +90,7 @@ &weim { status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts index 145e459625b3..d78793601306 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts @@ -16,7 +16,7 @@ display-timings { native-mode = <&timing0>; - timing0: 320x240 { + timing0: timing0 { clock-frequency = <6500000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts index 35123b7cb6b3..21d436972aa4 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts @@ -14,18 +14,12 @@ reg = <0xa0000000 0x08000000>; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + + usbphy0: usbphy { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts index 25442eba21c1..27c93b9fe049 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts @@ -19,7 +19,7 @@ fsl,pcr = <0xf0c88080>; /* non-standard but required */ display-timings { native-mode = <&timing0>; - timing0: 640x480 { + timing0: timing0 { hactive = <640>; vactive = <480>; hback-porch = <112>; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts index 7f0cd4d3ec2d..b8048e12e3d9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts @@ -19,7 +19,7 @@ display-timings { native-mode = <&timing0>; - timing0: 240x320 { + timing0: timing0 { clock-frequency = <5500000>; hactive = <240>; vactive = <320>; @@ -48,15 +48,12 @@ regulator-always-on; }; - usbphy { - usbphy2: usbphy@2 { - compatible = "usb-nop-xceiv"; - reg = <2>; - vcc-supply = <®_5v0>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy2: usbphy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_5v0>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi index 7b2ea4cdae58..e958d7286ae9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi @@ -29,19 +29,13 @@ regulator-max-microvolt = <5000000>; }; - usbphy { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - vcc-supply = <&sw3_reg>; - clocks = <&clks IMX27_CLK_DUMMY>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + + usbphy0: usbphy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&sw3_reg>; + clocks = <&clks IMX27_CLK_DUMMY>; + clock-names = "main_clk"; + #phy-cells = <0>; }; }; @@ -49,12 +43,12 @@ status = "okay"; /* SSI0 <=> PINS_4 (MC13783 Audio) */ - ssi0 { + mux-ssi0 { fsl,audmux-port = <0>; fsl,port-config = <0xcb205000>; }; - pins4 { + mux-pins4 { fsl,audmux-port = <2>; fsl,port-config = <0x00001000>; }; @@ -186,7 +180,7 @@ reg = <0x52>; }; - pcf8563@51 { + rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; @@ -314,7 +308,7 @@ &weim { status = "okay"; - nor: nor@0,0 { + nor: flash@0,0 { compatible = "cfi-flash"; reg = <0 0x00000000 0x02000000>; bank-width = <2>; diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi index faba12ee7465..ec472695c71e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi @@ -81,7 +81,7 @@ interrupt-parent = <&aitc>; ranges; - aipi1: aipi@10000000 { /* AIPI1 */ + aipi1: bus@10000000 { /* AIPI1 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -453,7 +453,7 @@ }; }; - aipi2: aipi@10020000 { /* AIPI2 */ + aipi2: bus@10020000 { /* AIPI2 */ compatible = "fsl,aipi-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -588,6 +588,9 @@ iram: sram@ffff4c00 { compatible = "mmio-sram"; reg = <0xffff4c00 0xb400>; + ranges = <0 0xffff4c00 0xb400>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts index 055d23a9aee7..0814f5665a59 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-cx9020.dts @@ -22,7 +22,7 @@ }; display-0 { - #address-cells =<1>; + #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "rgb24"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts index 7d4ae113c381..63cdf24eb397 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105pv2.dts @@ -22,7 +22,7 @@ compatible = "ilitek,ili251x"; reg = <0x41>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts index 9c5938e16d99..2e75d700efdb 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b105v2.dts @@ -22,7 +22,7 @@ compatible = "ilitek,ili251x"; reg = <0x41>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_EDGE_FALLING>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts index 01df7cffcef2..94625d5d5918 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125pv2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h60"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts index a015453daf10..b3cfa8110ade 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b125v2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h60"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts index b71ee6b79208..7edc788bcb8f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-b155v2.dts @@ -22,7 +22,7 @@ compatible = "eeti,exc80h84"; reg = <0x2a>; pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_q7_gpio0>; + pinctrl-0 = <&pinctrl_q7_gpio0>; interrupt-parent = <&gpio5>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; touchscreen-inverted-x; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts index 717decda0ceb..3ac7a4501620 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-apalis-ixora-v1.2.dts @@ -76,6 +76,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enable_can1_power>; regulator-name = "can1_supply"; + startup-delay-us = <1000>; }; reg_can2_supply: regulator-can2-supply { @@ -85,6 +86,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enable_can2_power>; regulator-name = "can2_supply"; + startup-delay-us = <1000>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts index 6f9d094dd6d0..18a620832a2a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dts @@ -16,7 +16,7 @@ compatible = "variscite,mx6customboard", "variscite,var-som-imx6q", "fsl,imx6q"; panel0: lvds-panel0 { - compatible = "panel-lvds"; + compatible = "panel-lvds"; backlight = <&backlight_lvds>; width-mm = <152>; height-mm = <91>; @@ -43,7 +43,7 @@ }; panel1: lvds-panel1 { - compatible = "panel-lvds"; + compatible = "panel-lvds"; width-mm = <152>; height-mm = <91>; data-mapping = "jeida-18"; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi index 4cc965277c52..2ae93f57fe5a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi @@ -12,6 +12,13 @@ model = "Toradex Apalis iMX6Q/D Module"; compatible = "toradex,apalis_imx6q", "fsl,imx6q"; + aliases { + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC1 slot */ + mmc2 = &usdhc2; /* SD1 slot */ + /delete-property/ mmc3; + }; + /* Will be filled by the bootloader */ memory@10000000 { device_type = "memory"; @@ -166,7 +173,7 @@ reg_usb_host_vbus: regulator-usb-host-vbus { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi index 11d9c7a2dacb..55c90f6393ad 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi @@ -12,6 +12,13 @@ model = "Toradex Colibri iMX6DL/S Module"; compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; + aliases { + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC/SD Slot */ + /delete-property/ mmc2; + /delete-property/ mmc3; + }; + backlight: backlight { compatible = "pwm-backlight"; brightness-levels = <0 45 63 88 119 158 203 255>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi index f1a41c76729c..5587069b6052 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon-avari.dtsi @@ -54,7 +54,7 @@ clk_codec: clock-codec { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <12000000>; + clock-frequency = <12000000>; }; sound { diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi index da0f8dae1ea8..4d2abcd44eff 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi @@ -500,21 +500,21 @@ pinctrl_pwm1: pwm1grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050 >; }; pinctrl_pwm3: pwm3grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050 >; }; pinctrl_pwm4: pwm4grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050 >; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi index b81799d7076a..596b3bb3ddd1 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-skov-cpu-revc.dtsi @@ -25,7 +25,7 @@ compatible = "ti,tsc2046e-adc"; reg = <0>; pinctrl-0 = <&pinctrl_touch>; - pinctrl-names ="default"; + pinctrl-names = "default"; spi-max-frequency = <1000000>; interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>; #io-channel-cells = <1>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi index bda182edc589..81142c523fa8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl.dtsi @@ -475,7 +475,7 @@ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi index f6b35923ad83..df3a375f0a3e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi @@ -418,7 +418,7 @@ <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; @@ -1010,7 +1010,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -1024,7 +1024,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; @@ -1038,7 +1038,7 @@ clock-names = "ipg", "ahb", "per"; bus-width = <4>; fsl,tuning-start-tap = <20>; - fsl,tuning-step= <2>; + fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi index 3b87d980e9f4..a27a7554c2e7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul.dtsi @@ -364,7 +364,7 @@ <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc"; - fsl,asrc-rate = <48000>; + fsl,asrc-rate = <48000>; fsl,asrc-width = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi index fe42b0a46831..3fc3130f9def 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi @@ -128,11 +128,16 @@ }; }; - /* NXP SE97BTP with temperature sensor + eeprom */ + /* LM75A temperature sensor, TQMa7x 01xx */ + lm75a: temperature-sensor@48 { + compatible = "national,lm75a"; + reg = <0x48>; + }; + + /* NXP SE97BTP with temperature sensor + eeprom, TQMa7x 02xx */ se97b: temperature-sensor-eeprom@1e { compatible = "nxp,se97b", "jedec,jc-42.4-temp"; reg = <0x1e>; - status = "okay"; }; /* ST M24C64 */ diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi index 3740e34ef99f..9670f45eab3b 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-colibri-emmc.dtsi @@ -11,6 +11,10 @@ /* Required to properly pass MAC addresses from bootloader. */ ethernet0 = &fec1; ethernet1 = &fec2; + mmc0 = &usdhc3; /* eMMC */ + mmc1 = &usdhc1; /* MMC/SD slot */ + /delete-property/ mmc2; + /delete-property/ mmc3; }; memory@80000000 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts index dd8003bd1fc0..f0fda15f3020 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-meerkat96.dts @@ -212,7 +212,7 @@ keep-power-in-suspend; wakeup-source; vmmc-supply = <®_wlreg_on>; - vqmmc-supply =<®_3p3v>; + vqmmc-supply = <®_3p3v>; status = "okay"; brcmf: wifi@1 { diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi index c5eefe89cd99..8d5037ac03c7 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico.dtsi @@ -108,6 +108,14 @@ assigned-clock-rates = <0>, <32768>; }; +&cpu0 { + cpu-supply = <&sw1a_reg>; +}; + +&cpu1 { + cpu-supply = <&sw1a_reg>; +}; + &ecspi3 { cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts index 85b97b5f64e7..7ed27c7ad726 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts +++ b/arch/arm/boot/dts/nxp/imx/imx7d-smegw01.dts @@ -149,7 +149,7 @@ &i2c2 { pinctrl-names = "default"; - pinctrl-0 =<&pinctrl_i2c2>; + pinctrl-0 = <&pinctrl_i2c2>; clock-frequency = <100000>; status = "okay"; diff --git a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi index 4b94b8afb55d..0484e349e064 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7d.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7d.dtsi @@ -217,9 +217,6 @@ }; &ca_funnel_in_ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { reg = <1>; ca_funnel_in_port1: endpoint { diff --git a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi index 5387da8a2a0a..ebf7befcc11e 100644 --- a/arch/arm/boot/dts/nxp/imx/imx7s.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx7s.dtsi @@ -183,6 +183,15 @@ interrupt-parent = <&gpc>; ranges; + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + ranges = <0 0x00900000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks IMX7D_OCRAM_CLK>; + }; + funnel@30041000 { compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; @@ -190,7 +199,11 @@ clock-names = "apb_pclk"; ca_funnel_in_ports: in-ports { - port { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; ca_funnel_in_port0: endpoint { remote-endpoint = <&etm0_out_port>; }; @@ -605,6 +618,7 @@ nvmem-cells = <&tempmon_calib>, <&fuse_grade>; nvmem-cell-names = "calib", "temp_grade"; clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>; + #thermal-sensor-cells = <0>; }; }; @@ -720,6 +734,8 @@ clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, <&clks IMX7D_ECSPI4_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 6 7 1>, <&sdma 7 7 2>; status = "disabled"; }; @@ -811,13 +827,23 @@ }; lcdif: lcdif@30730000 { - compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; + compatible = "fsl,imx7d-lcdif", "fsl,imx6sx-lcdif"; reg = <0x30730000 0x10000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>; clock-names = "pix", "axi"; status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + lcdif_out_mipi_dsi: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_dsi_in_lcdif>; + }; + }; }; mipi_csi: mipi-csi@30750000 { @@ -850,6 +876,42 @@ }; }; }; + + mipi_dsi: dsi@30760000 { + compatible = "fsl,imx7d-mipi-dsim", "fsl,imx8mm-mipi-dsim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x30760000 0x400>; + clocks = <&clks IMX7D_MIPI_DSI_ROOT_CLK>, + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; + clock-names = "bus_clk", "sclk_mipi"; + assigned-clocks = <&clks IMX7D_MIPI_DSI_ROOT_SRC>, + <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_PFD5_CLK>; + assigned-clock-rates = <0>, <333000000>; + power-domains = <&pgc_mipi_phy>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + samsung,burst-clock-frequency = <891000000>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <24000000>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + mipi_dsi_in_lcdif: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdif_out_mipi_dsi>; + }; + }; + }; + }; }; aips3: bus@30800000 { @@ -875,6 +937,8 @@ clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, <&clks IMX7D_ECSPI1_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 0 7 1>, <&sdma 1 7 2>; status = "disabled"; }; @@ -887,6 +951,8 @@ clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, <&clks IMX7D_ECSPI2_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 2 7 1>, <&sdma 3 7 2>; status = "disabled"; }; @@ -899,6 +965,8 @@ clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, <&clks IMX7D_ECSPI3_ROOT_CLK>; clock-names = "ipg", "per"; + dma-names = "rx", "tx"; + dmas = <&sdma 4 7 1>, <&sdma 5 7 2>; status = "disabled"; }; @@ -1275,7 +1343,7 @@ gpmi: nand-controller@33002000 { compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi index 5a8b867d7d79..e78d0a7d8cd2 100644 --- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi @@ -467,7 +467,7 @@ pinctrl_pwm2: pwm2grp { fsl,pins = < - /* 100 k PD, DSE 120 OHM, SPPEED LO */ + /* 100 k PD, DSE 120 OHM, SPEED LO */ MX6UL_PAD_GPIO1_IO09__PWM2_OUT 0x00003050 >; }; diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi index 9cf09c183b85..6dd73290f0c6 100644 --- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi +++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi @@ -74,7 +74,7 @@ sct_pwm: pwm@40000000 { compatible = "nxp,lpc1850-sct-pwm"; reg = <0x40000000 0x1000>; - clocks =<&ccu1 CLK_CPU_SCT>; + clocks = <&ccu1 CLK_CPU_SCT>; clock-names = "pwm"; resets = <&rgu 37>; #pwm-cells = <3>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi index 49c78c84cd5d..d471cc5efa94 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi @@ -112,7 +112,7 @@ compatible = "fsl,ls1021a-msi"; reg = <0x0 0x1570e00 0x0 0x8>; msi-controller; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; }; msi2: msi-controller@1570e08 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts index 636cf09a2b37..b23e7ada9c80 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx23-sansa.dts @@ -175,10 +175,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = < - &gpio1 24 0 /* SDA */ - &gpio1 22 0 /* SCL */ - >; + sda-gpios = <&gpio1 24 0>; + scl-gpios = <&gpio1 22 0>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; @@ -186,10 +184,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; - gpios = < - &gpio0 31 0 /* SDA */ - &gpio0 30 0 /* SCL */ - >; + sda-gpios = <&gpio0 31 0>; + scl-gpios = <&gpio0 30 0>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ touch: touch@20 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi index fdf18b7cb2f6..0309592af1e1 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi @@ -110,7 +110,7 @@ reg = <0x80018000 0x2000>; gpio0: gpio@0 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <0>; interrupts = <16>; gpio-controller; @@ -120,7 +120,7 @@ }; gpio1: gpio@1 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <1>; interrupts = <17>; gpio-controller; @@ -130,7 +130,7 @@ }; gpio2: gpio@2 { - compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx23-gpio"; reg = <2>; interrupts = <18>; gpio-controller; @@ -412,7 +412,7 @@ status = "disabled"; }; - dma_apbx: dma-apbx@80024000 { + dma_apbx: dma-controller@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <7>, <5>, <9>, <26>, @@ -484,7 +484,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx23-clkctrl", "fsl,clkctrl"; + compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi index bb971e660db8..69fcb0dde940 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28-lwe.dtsi @@ -18,6 +18,7 @@ memory@40000000 { reg = <0x40000000 0x08000000>; + device_type = "memory"; }; reg_3v3: regulator-reg-3v3 { diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 153e4017951d..5485fe118dc4 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -260,6 +260,7 @@ sgtl5000: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + #sound-dai-cells = <0>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; clocks = <&mclk>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi index 6932d23fb29d..4817fba2d938 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi @@ -164,7 +164,7 @@ reg = <0x80018000 0x2000>; gpio0: gpio@0 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <0>; interrupts = <127>; gpio-controller; @@ -174,7 +174,7 @@ }; gpio1: gpio@1 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <1>; interrupts = <126>; gpio-controller; @@ -184,7 +184,7 @@ }; gpio2: gpio@2 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <2>; interrupts = <125>; gpio-controller; @@ -194,7 +194,7 @@ }; gpio3: gpio@3 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <3>; interrupts = <124>; gpio-controller; @@ -204,7 +204,7 @@ }; gpio4: gpio@4 { - compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + compatible = "fsl,imx28-gpio"; reg = <4>; interrupts = <123>; gpio-controller; @@ -990,7 +990,7 @@ status = "disabled"; }; - dma_apbx: dma-apbx@80024000 { + dma_apbx: dma-controller@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; interrupts = <78>, <79>, <66>, <0>, @@ -1100,7 +1100,7 @@ ranges; clks: clkctrl@80040000 { - compatible = "fsl,imx28-clkctrl", "fsl,clkctrl"; + compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi index 14c411f146f5..5a19da9313ae 100644 --- a/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi +++ b/arch/arm/boot/dts/nxp/vf/vf-colibri-eval-v3.dtsi @@ -55,7 +55,7 @@ brightness-levels = <0 4 8 16 32 64 128 255>; default-brightness-level = <6>; power-supply = <®_3v3>; - status = "okay"; + status = "okay"; }; &dcu0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts index e4f691d601cc..722182f5fd17 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-bk4.dts @@ -68,7 +68,7 @@ #address-cells = <1>; #size-cells = <0>; /* PTD12 ->RPIO[91] */ - sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; + sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>; /* PTD10 ->RPIO[89] */ miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; num-chipselects = <0>; @@ -79,7 +79,7 @@ gpio-controller; #gpio-cells = <2>; /* PTB18 -> RGPIO[40] */ - load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; spi-max-frequency = <100000>; }; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts index 1a19aec8957b..7e72f860c3c5 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-cfu1.dts @@ -162,7 +162,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6085"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_switch>; @@ -173,26 +173,26 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "eth_cu_1000_1"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_2"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -200,7 +200,7 @@ sfp = <&sff>; }; - port@6 { + ethernet-port@6 { reg = <6>; phy-mode = "rmii"; ethernet = <&fec1>; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts index 16b4e06c4efa..b0ed68af0546 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts @@ -294,11 +294,11 @@ pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; - sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; miso-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW - &gpio1 8 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 9 GPIO_ACTIVE_LOW + &gpio1 8 GPIO_ACTIVE_HIGH>; num-chipselects = <2>; flash@0 { diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts index df1335492a19..77492eeea450 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-scu4-aib.dts @@ -47,17 +47,17 @@ #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 0>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -68,37 +68,37 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "aib2main_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "aib2main_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_5"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_6"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_7"; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "modem_pic"; @@ -108,7 +108,7 @@ }; }; - switch0port10: port@10 { + switch0port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -130,32 +130,32 @@ #address-cells = <1>; #size-cells = <0>; - switch1: switch1@0 { + switch1: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 1>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_100_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_100_3"; }; - switch1port9: port@9 { + switch1port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "xgmii"; @@ -168,7 +168,7 @@ }; }; - switch1port10: port@10 { + switch1port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; @@ -188,17 +188,17 @@ #address-cells = <1>; #size-cells = <0>; - switch2: switch2@0 { + switch2: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 2>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_2"; phy-mode = "1000base-x"; @@ -206,7 +206,7 @@ sfp = <&sff1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_3"; phy-mode = "1000base-x"; @@ -214,7 +214,7 @@ sfp = <&sff2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_4"; phy-mode = "1000base-x"; @@ -222,7 +222,7 @@ sfp = <&sff3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_fc_1000_5"; phy-mode = "1000base-x"; @@ -230,7 +230,7 @@ sfp = <&sff4>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_fc_1000_6"; phy-mode = "1000base-x"; @@ -238,7 +238,7 @@ sfp = <&sff5>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "eth_fc_1000_7"; phy-mode = "1000base-x"; @@ -246,7 +246,7 @@ sfp = <&sff6>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_fc_1000_1"; phy-mode = "1000base-x"; @@ -254,7 +254,7 @@ sfp = <&sff0>; }; - switch2port10: port@10 { + switch2port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "2500base-x"; @@ -276,17 +276,17 @@ #address-cells = <1>; #size-cells = <0>; - switch3: switch3@0 { + switch3: ethernet-switch@0 { compatible = "marvell,mv88e6190"; reg = <0>; dsa,member = <0 3>; eeprom-length = <65536>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_fc_1000_8"; phy-mode = "1000base-x"; @@ -294,7 +294,7 @@ sfp = <&sff7>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_fc_1000_9"; phy-mode = "1000base-x"; @@ -302,7 +302,7 @@ sfp = <&sff8>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_fc_1000_10"; phy-mode = "1000base-x"; @@ -310,7 +310,7 @@ sfp = <&sff9>; }; - switch3port9: port@9 { + switch3port9: ethernet-port@9 { reg = <9>; label = "dsa"; phy-mode = "2500base-x"; @@ -322,7 +322,7 @@ }; }; - switch3port10: port@10 { + switch3port10: ethernet-port@10 { reg = <10>; label = "dsa"; phy-mode = "xgmii"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts index 1461804ecaea..2a490464660c 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-spb4.dts @@ -123,7 +123,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -134,11 +134,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -149,32 +149,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts index 463c2452b9b7..078d8699e16d 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-dtu.dts @@ -112,7 +112,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -123,11 +123,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -138,27 +138,27 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_100_3"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_4"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_5"; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "eth_cu_1000_1"; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "eth_cu_1000_2"; phy-handle = <&phy9>; @@ -167,12 +167,12 @@ }; }; - mdio1 { + mdio-external { compatible = "marvell,mv88e6xxx-mdio-external"; #address-cells = <1>; #size-cells = <0>; - phy9: phy9@0 { + phy9: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c45"; pinctrl-0 = <&pinctrl_gpio_phy9>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts index f5ae0d5de315..22c8f44390a9 100644 --- a/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts +++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-ssmb-spu3.dts @@ -137,7 +137,7 @@ suppress-preamble; status = "okay"; - switch0: switch0@0 { + switch0: ethernet-switch@0 { compatible = "marvell,mv88e6190"; pinctrl-0 = <&pinctrl_gpio_switch0>; pinctrl-names = "default"; @@ -148,11 +148,11 @@ interrupt-controller; #interrupt-cells = <2>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; phy-mode = "rmii"; ethernet = <&fec1>; @@ -163,32 +163,32 @@ }; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "eth_cu_1000_1"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "eth_cu_1000_2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "eth_cu_1000_3"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "eth_cu_1000_4"; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "eth_cu_1000_5"; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "eth_cu_1000_6"; }; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 3dfb1c8cefb8..9cc1e14e6cd0 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -23,12 +23,19 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk07.1-c2.dtb \ qcom-ipq8064-ap148.dtb \ qcom-ipq8064-rb3011.dtb \ + qcom-msm8226-microsoft-dempsey.dtb \ + qcom-msm8226-microsoft-makepeace.dtb \ + qcom-msm8226-microsoft-moneypenny.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \ qcom-msm8916-samsung-e7.dtb \ qcom-msm8916-samsung-grandmax.dtb \ qcom-msm8916-samsung-serranove.dtb \ + qcom-msm8926-htc-memul.dtb \ + qcom-msm8926-microsoft-superman-lte.dtb \ + qcom-msm8926-microsoft-tesla.dtb \ + qcom-msm8926-motorola-peregrine.dtb \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ diff --git a/arch/arm/boot/dts/qcom/pm8018.dtsi b/arch/arm/boot/dts/qcom/pm8018.dtsi new file mode 100644 index 000000000000..22f3c7bac522 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8018.dtsi @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Device Tree Source for Qualcomm PM8018 + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + */ + +&ssbi { + pm8018: pmic { + compatible = "qcom,pm8018", "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8018-pwrkey", + "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8018 50 IRQ_TYPE_EDGE_RISING>, + <&pm8018 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8018_mpps: mpps@50 { + compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8018_mpps 0 0 6>; + }; + + rtc@11d { + compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8018 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8018_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8018_gpio 0 0 6>; + #gpio-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/pm8058.dtsi b/arch/arm/boot/dts/qcom/pm8058.dtsi new file mode 100644 index 000000000000..984b79777984 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8058.dtsi @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8058: pmic { + compatible = "qcom,pm8058"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8058-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8058 50 IRQ_TYPE_EDGE_RISING>, + <&pm8058 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8058_led48: led@48 { + compatible = "qcom,pm8058-keypad-led"; + reg = <0x48>; + status = "disabled"; + }; + + vibrator@4a { + compatible = "qcom,pm8058-vib"; + reg = <0x4a>; + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8058_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pm8058_led131: led@131 { + compatible = "qcom,pm8058-led"; + reg = <0x131>; + status = "disabled"; + }; + + pm8058_led132: led@132 { + compatible = "qcom,pm8058-led"; + reg = <0x132>; + status = "disabled"; + }; + + pm8058_led133: led@133 { + compatible = "qcom,pm8058-led"; + reg = <0x133>; + status = "disabled"; + }; + + pm8058_keypad: keypad@148 { + compatible = "qcom,pm8058-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8058 74 IRQ_TYPE_EDGE_RISING>, + <&pm8058 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + }; + + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8058_gpio 0 0 44>; + #gpio-cells = <2>; + }; + + pm8058_xoadc: xoadc@197 { + compatible = "qcom,pm8058-adc"; + reg = <0x197>; + interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + ichg: adc-channel@3 { + reg = <0x00 0x03>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + ref_325mv: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + + rtc@1e8 { + compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; + interrupts-extended = <&pm8058 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */ + <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom/pm8226.dtsi index 2413778f3715..2fd4f135ed84 100644 --- a/arch/arm/boot/dts/qcom/qcom-pm8226.dtsi +++ b/arch/arm/boot/dts/qcom/pm8226.dtsi @@ -82,6 +82,8 @@ "usb-valid", "dc-valid"; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/pm8821.dtsi b/arch/arm/boot/dts/qcom/pm8821.dtsi new file mode 100644 index 000000000000..064e3ba54e18 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8821.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* This PMIC is used on a secondary SSBI bus */ +&ssbi2 { + pm8821: pmic { + compatible = "qcom,pm8821"; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pm8821_mpps: mpps@50 { + compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8821_mpps 0 0 4>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom/pm8841.dtsi index 3bf2ce5c86a6..3bf2ce5c86a6 100644 --- a/arch/arm/boot/dts/qcom/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom/pm8841.dtsi diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi new file mode 100644 index 000000000000..058962af3005 --- /dev/null +++ b/arch/arm/boot/dts/qcom/pm8921.dtsi @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0 + +&ssbi { + pm8921: pmic { + compatible = "qcom,pm8921"; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupts-extended = <&pm8921 50 IRQ_TYPE_EDGE_RISING>, + <&pm8921 51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pm8921_mpps: mpps@50 { + compatible = "qcom,pm8921-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8921_mpps 0 0 12>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts-extended = <&pm8921 39 IRQ_TYPE_EDGE_RISING>; + allow-set-time; + }; + + pm8921_keypad: keypad@148 { + compatible = "qcom,pm8921-keypad"; + reg = <0x148>; + interrupts-extended = <&pm8921 74 IRQ_TYPE_EDGE_RISING>, + <&pm8921 75 IRQ_TYPE_EDGE_RISING>; + debounce = <15>; + scan-delay = <32>; + row-hold = <91500>; + status = "disabled"; + }; + + pm8921_gpio: gpio@150 { + + compatible = "qcom,pm8921-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; + #gpio-cells = <2>; + + }; + + pm8921_xoadc: xoadc@197 { + compatible = "qcom,pm8921-adc"; + reg = <0x197>; + interrupts-extended = <&pm8921 78 IRQ_TYPE_EDGE_RISING>; + #address-cells = <2>; + #size-cells = <0>; + #io-channel-cells = <2>; + + vcoin: adc-channel@0 { + reg = <0x00 0x00>; + }; + + vbat: adc-channel@1 { + reg = <0x00 0x01>; + }; + + dcin: adc-channel@2 { + reg = <0x00 0x02>; + }; + + vph_pwr: adc-channel@4 { + reg = <0x00 0x04>; + }; + + batt_therm: adc-channel@8 { + reg = <0x00 0x08>; + }; + + batt_id: adc-channel@9 { + reg = <0x00 0x09>; + }; + + usb_vbus: adc-channel@a { + reg = <0x00 0x0a>; + }; + + die_temp: adc-channel@b { + reg = <0x00 0x0b>; + }; + + ref_625mv: adc-channel@c { + reg = <0x00 0x0c>; + }; + + ref_1250mv: adc-channel@d { + reg = <0x00 0x0d>; + }; + + chg_temp: adc-channel@e { + reg = <0x00 0x0e>; + }; + + ref_muxoff: adc-channel@f { + reg = <0x00 0x0f>; + }; + }; + }; +}; + +/ { + /* + * These channels from the ADC are simply hardware monitors. + * That is why the ADC is referred to as "HKADC" - HouseKeeping + * ADC. + */ + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&pm8921_xoadc 0x00 0x01>, /* Battery */ + <&pm8921_xoadc 0x00 0x02>, /* DC in (charger) */ + <&pm8921_xoadc 0x00 0x04>, /* VPH the main system voltage */ + <&pm8921_xoadc 0x00 0x0b>, /* Die temperature */ + <&pm8921_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ + <&pm8921_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ + <&pm8921_xoadc 0x00 0x0e>; /* Charger temperature */ + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom/pm8941.dtsi index ed0ba591c755..aca0052a02b7 100644 --- a/arch/arm/boot/dts/qcom/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom/pm8941.dtsi @@ -99,6 +99,8 @@ usb-otg-in-supply = <&pm8941_5vs1>; + status = "disabled"; + chg_otg: otg-vbus { }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom/pma8084.dtsi index 2985f4805b93..2985f4805b93 100644 --- a/arch/arm/boot/dts/qcom/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom/pma8084.dtsi diff --git a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi b/arch/arm/boot/dts/qcom/pmx55.dtsi index da0851173c69..da0851173c69 100644 --- a/arch/arm/boot/dts/qcom/qcom-pmx55.dtsi +++ b/arch/arm/boot/dts/qcom/pmx55.dtsi diff --git a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi b/arch/arm/boot/dts/qcom/pmx65.dtsi index 1c7fdf59c1f5..1c7fdf59c1f5 100644 --- a/arch/arm/boot/dts/qcom/qcom-pmx65.dtsi +++ b/arch/arm/boot/dts/qcom/pmx65.dtsi diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts index aa0e0e8d2a97..a2ca456012f1 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-asus-sparrow.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "qcom-msm8226.dtsi" -#include "qcom-pm8226.dtsi" +#include "pm8226.dtsi" /delete-node/ &adsp_region; @@ -253,6 +253,8 @@ qcom,fast-charge-high-threshold-voltage = <4400000>; qcom,auto-recharge-threshold-voltage = <4300000>; qcom,minimum-input-voltage = <4400000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts index de19640efe55..ac228965a485 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-huawei-sturgeon.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "qcom-msm8226.dtsi" -#include "qcom-pm8226.dtsi" +#include "pm8226.dtsi" #include <dt-bindings/input/ti-drv260x.h> /delete-node/ &adsp_region; @@ -335,6 +335,8 @@ qcom,fast-charge-current-limit = <300000>; qcom,fast-charge-safe-current = <600000>; qcom,auto-recharge-threshold-voltage = <4240000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts index b887e5361ec3..0a1fd5eb3c6d 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-lg-lenok.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "qcom-msm8226.dtsi" -#include "qcom-pm8226.dtsi" +#include "pm8226.dtsi" /delete-node/ &adsp_region; @@ -292,6 +292,8 @@ qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts index f516e0426bb9..cffc069712b2 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-matisse-wifi.dts @@ -7,7 +7,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8226.dtsi" -#include "qcom-pm8226.dtsi" +#include "pm8226.dtsi" /delete-node/ &adsp_region; /delete-node/ &smem_region; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts index 569cbf0d8df8..009afd8212c2 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8060-dragonboard.dts @@ -5,6 +5,7 @@ #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm APQ8060 Dragonboard"; @@ -71,7 +72,7 @@ /* Trig on both edges - getting close or far away */ interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>; /* MPP05 analog input to the XOADC */ - io-channels = <&xoadc 0x00 0x05>; + io-channels = <&pm8058_xoadc 0x00 0x05>; io-channel-names = "aout"; pinctrl-names = "default"; pinctrl-0 = <&dragon_cm3605_gpios>, <&dragon_cm3605_mpps>; @@ -272,6 +273,10 @@ }; }; +&pm8058 { + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8058_gpio { dragon_ethernet_gpios: ethernet-state { pinconf { @@ -447,6 +452,8 @@ * that means */ regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + vdd_l0-supply = <&pm8901_s4>; vdd_l1-supply = <&vph>; vdd_l2-supply = <&vph>; @@ -464,57 +471,63 @@ lvs3_in-supply = <&pm8058_s2>; mvs_in-supply = <&pm8058_s3>; - l0 { + pm8901_l0: l0 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l1 { + + pm8901_l1: l1 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l2 { + + pm8901_l2: l2 { /* TMA340 requires strictly 3.3V */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l3 { + + pm8901_l3: l3 { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + + pm8901_l4: l4 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l5 { + + pm8901_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l6 { + + pm8901_l6: l6 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; bias-pull-down; }; /* s0 and s1 are SAW regulators controlled over SPM */ - s2 { + pm8901_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8901_s3: s3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s4 { + pm8901_s4: s4 { regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; qcom,switch-mode-frequency = <1600000>; @@ -522,17 +535,22 @@ }; /* LVS0 thru 3 and mvs are just switches */ - lvs0 { + pm8901_lvs0: lvs0 { regulator-always-on; }; - lvs1 { }; - lvs2 { }; - lvs3 { }; - mvs { }; + pm8901_lvs1: lvs1 { }; + + pm8901_lvs2: lvs2 { }; + + pm8901_lvs3: lvs3 { }; + + pm8901_mvs: mvs { }; }; regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; + vdd_l0_l1_lvs-supply = <&pm8058_s3>; vdd_l2_l11_l12-supply = <&vph>; vdd_l3_l4_l5-supply = <&vph>; @@ -554,144 +572,169 @@ vdd_s4-supply = <&vph>; vdd_ncp-supply = <&vph>; - l0 { + pm8058_l0: l0 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l1 { + + pm8058_l1: l1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l2 { + + pm8058_l2: l2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l3 { + + pm8058_l3: l3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l4 { + + pm8058_l4: l4 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l5 { + + pm8058_l5: l5 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l6 { + + pm8058_l6: l6 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3600000>; bias-pull-down; }; - l7 { + + pm8058_l7: l7 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l8 { + + pm8058_l8: l8 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <3050000>; bias-pull-down; }; - l9 { + + pm8058_l9: l9 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l10 { + + pm8058_l10: l10 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l11 { + + pm8058_l11: l11 { regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; bias-pull-down; }; - l12 { + + pm8058_l12: l12 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l13 { + + pm8058_l13: l13 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; bias-pull-down; }; - l14 { + + pm8058_l14: l14 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - l15 { + + pm8058_l15: l15 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; bias-pull-down; }; - l16 { + + pm8058_l16: l16 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; regulator-always-on; }; - l17 { + + pm8058_l17: l17 { // 1.5V according to schematic regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l18 { + + pm8058_l18: l18 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; bias-pull-down; }; - l19 { + + pm8058_l19: l19 { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; bias-pull-down; }; - l20 { + + pm8058_l20: l20 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l21 { + + pm8058_l21: l21 { // 1.1 V according to schematic regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; regulator-always-on; }; - l22 { + + pm8058_l22: l22 { // 1.2 V according to schematic regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l23 { + + pm8058_l23: l23 { // Unused regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l24 { + + pm8058_l24: l24 { // Unused regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l25 { + + pm8058_l25: l25 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - s0 { + pm8058_s0: s0 { // regulator-min-microvolt = <500000>; // regulator-max-microvolt = <1325000>; regulator-min-microvolt = <1100000>; @@ -699,7 +742,8 @@ qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s1 { + + pm8058_s1: s1 { // regulator-min-microvolt = <500000>; // regulator-max-microvolt = <1250000>; regulator-min-microvolt = <1100000>; @@ -707,21 +751,24 @@ qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s2 { + + pm8058_s2: s2 { // 1.3 V according to schematic regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + + pm8058_s3: s3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; regulator-always-on; bias-pull-down; }; - s4 { + + pm8058_s4: s4 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; @@ -730,14 +777,15 @@ }; /* LVS0 and LVS1 are just switches */ - lvs0 { + pm8058_lvs0: lvs0 { bias-pull-down; }; - lvs1 { + + pm8058_lvs1: lvs1 { bias-pull-down; }; - ncp { + pm8058_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; @@ -944,28 +992,32 @@ }; }; -&xoadc { +&pm8058_xoadc { /* Reference voltage 2.2 V */ xoadc-ref-supply = <&pm8058_l18>; /* Board-specific channels */ - mpp5@5 { + adc-channel@5 { /* Connected to AOUT of ALS sensor */ reg = <0x00 0x05>; }; - mpp6@6 { + + adc-channel@6 { /* Connected to test point TP43 */ reg = <0x00 0x06>; }; - mpp7@7 { + + adc-channel@7 { /* Connected to battery thermistor */ reg = <0x00 0x07>; }; - mpp8@8 { + + adc-channel@8 { /* Connected to battery ID detector */ reg = <0x00 0x08>; }; - mpp9@9 { + + adc-channel@9 { /* Connected to XO thermistor */ reg = <0x00 0x09>; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts index c0dd6399f597..d460743fbb94 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -1,8 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Asus Nexus7(flo)"; compatible = "asus,nexus7-flo", "qcom,apq8064"; @@ -180,24 +184,26 @@ status = "okay"; }; -/* eMMC */ -&sdcc1 { - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - status = "okay"; -}; - &mdp_dsi1_out { remote-endpoint = <&dsi0_in>; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_l24-supply = <&pm8921_s1>; vdd_l25-supply = <&pm8921_s1>; vin_lvs2-supply = <&pm8921_s1>; @@ -209,7 +215,7 @@ vdd_ncp-supply = <&pm8921_l6>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -218,7 +224,7 @@ }; /* msm otg HSUSB_VDDCX */ - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; @@ -231,55 +237,58 @@ * tabla2x-slim-CDC_VDD_CP * tabla2x-slim-VDDIO_CDC */ - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; regulator-always-on; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; /* mipi_dsi.1-dsi1_pll_vdda */ - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; /* msm_otg-HSUSB_1p8 */ - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; /* msm_sdcc.1-sdc_vdd */ - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-always-on; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; }; + pm8921_l8: l8 { + }; + /* mipi_dsi.1-dsi1_avdd */ - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; @@ -287,14 +296,14 @@ }; /* pwm_power for backlight */ - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; /* camera, qdsp6 */ - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; @@ -304,37 +313,44 @@ * tabla2x-slim-CDC_VDDA_A_1P2V * tabla2x-slim-VDDD_CDC_D */ - l25 { + pm8921_l25: l25 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; /* * mipi_dsi.1-dsi1_vddio * pil_riva-pll_vdd */ - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; }; }; +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + &usb_hs1_phy { v3p3-supply = <&pm8921_l3>; v1p8-supply = <&pm8921_l4>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts index d6ecfd8addb7..671d58cc2741 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts @@ -1,8 +1,11 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "CompuLab CM-QS600"; compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064"; @@ -69,6 +72,14 @@ status = "okay"; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { wlan_default_gpios: wlan-gpios-state { pinconf { @@ -82,6 +93,8 @@ &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs2-supply = <&pm8921_s1>; vin_lvs4_5_7-supply = <&pm8921_s4>; @@ -93,9 +106,8 @@ vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; - /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -103,52 +115,51 @@ bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts index b0c5e7bd5e74..ed86b24119c9 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -1,9 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; @@ -170,6 +173,14 @@ perst-gpios = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { wlan_default_gpios: wlan-gpios-state { pinconf { @@ -192,6 +203,8 @@ &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; vin_lvs2-supply = <&pm8921_s1>; vin_lvs4_5_7-supply = <&pm8921_s4>; @@ -203,9 +216,8 @@ vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; - /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -213,59 +225,63 @@ bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs6 { + pm8921_hdmi_switch: hdmi-switch { bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts index 9244512b74d1..2412aa3e3e8d 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 -#include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/mfd/qcom-rpm.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-apq8064-v2.0.dtsi" +#include "pm8821.dtsi" +#include "pm8921.dtsi" + / { model = "Sony Xperia Z"; compatible = "sony,xperia-yuga", "qcom,apq8064"; @@ -65,6 +68,14 @@ status = "okay"; }; +&pm8821 { + interrupts-extended = <&tlmm_pinmux 76 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921 { + interrupts-extended = <&tlmm_pinmux 74 IRQ_TYPE_LEVEL_LOW>; +}; + &pm8921_gpio { gpio_keys_pin_a: gpio-keys-active-state { pins = "gpio3", "gpio4", "gpio29", "gpio35"; @@ -82,11 +93,25 @@ &riva { pinctrl-names = "default"; pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + status = "okay"; + + iris { + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; }; &rpm { regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_l1_l2_l12_l18-supply = <&pm8921_s4>; vin_lvs_1_3_6-supply = <&pm8921_s4>; vin_lvs_4_5_7-supply = <&pm8921_s4>; @@ -98,7 +123,7 @@ vin_l28-supply = <&pm8921_s7>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -106,21 +131,21 @@ bias-pull-down; }; - s2 { + pm8921_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; bias-pull-down; }; - s4 { + pm8921_s4: s4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -129,205 +154,207 @@ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - s8 { + pm8921_s8: s8 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; }; /* PMOS LDO */ - l1 { + pm8921_l1: l1 { regulator-always-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; bias-pull-down; }; - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l7 { + pm8921_l7: l7 { regulator-min-microvolt = <1850000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l8 { + pm8921_l8: l8 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l9 { + pm8921_l9: l9 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l10 { + pm8921_l10: l10 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l12 { + pm8921_l12: l12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l14 { + pm8921_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l15 { + pm8921_l15: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l16 { + pm8921_l16: l16 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; - l18 { + pm8921_l18: l18 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l21 { + pm8921_l21: l21 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l22 { + pm8921_l22: l22 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l24 { + pm8921_l24: l24 { regulator-min-microvolt = <750000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l25 { + pm8921_l25: l25 { regulator-always-on; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - l27 { + pm8921_l27: l27 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - l28 { + pm8921_l28: l28 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l29 { + pm8921_l29: l29 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; /* Low Voltage Switch */ - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs2 { + pm8921_lvs2: lvs2 { bias-pull-down; }; - lvs3 { + pm8921_lvs3: lvs3 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; - usb-switch {}; + pm8921_usb_switch: usb-switch {}; - hdmi-switch {}; + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; - ncp { + pm8921_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 59fd86b9fb47..3faf57035d54 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -284,23 +284,6 @@ }; }; - - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Charger temperature */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -655,133 +638,16 @@ clock-names = "core"; }; - ssbi@c00000 { + ssbi2: ssbi@c00000 { compatible = "qcom,ssbi"; reg = <0x00c00000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8821: pmic { - compatible = "qcom,pm8821"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <76 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8821_mpps: mpps@50 { - compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp"; - reg = <0x50>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8821_mpps 0 0 4>; - }; - }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <74 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8921_gpio: gpio@150 { - - compatible = "qcom,pm8921-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8921_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8921_mpps: mpps@50 { - compatible = "qcom,pm8921-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8921_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 1>; - reg = <0x11d>; - allow-set-time; - }; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - xoadc: xoadc@197 { - compatible = "qcom,pm8921-adc"; - reg = <197>; - interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - batt_therm: adc-channel@8 { - reg = <0x00 0x08>; - }; - batt_id: adc-channel@9 { - reg = <0x00 0x09>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - chg_temp: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - }; }; qfprom: qfprom@700000 { @@ -891,60 +757,6 @@ clocks = <&pxo_board>, <&cxo_board>; clock-names = "pxo", "cxo"; }; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - - pm8921_s1: s1 {}; - pm8921_s2: s2 {}; - pm8921_s3: s3 {}; - pm8921_s4: s4 {}; - pm8921_s7: s7 {}; - pm8921_s8: s8 {}; - - pm8921_l1: l1 {}; - pm8921_l2: l2 {}; - pm8921_l3: l3 {}; - pm8921_l4: l4 {}; - pm8921_l5: l5 {}; - pm8921_l6: l6 {}; - pm8921_l7: l7 {}; - pm8921_l8: l8 {}; - pm8921_l9: l9 {}; - pm8921_l10: l10 {}; - pm8921_l11: l11 {}; - pm8921_l12: l12 {}; - pm8921_l14: l14 {}; - pm8921_l15: l15 {}; - pm8921_l16: l16 {}; - pm8921_l17: l17 {}; - pm8921_l18: l18 {}; - pm8921_l21: l21 {}; - pm8921_l22: l22 {}; - pm8921_l23: l23 {}; - pm8921_l24: l24 {}; - pm8921_l25: l25 {}; - pm8921_l26: l26 {}; - pm8921_l27: l27 {}; - pm8921_l28: l28 {}; - pm8921_l29: l29 {}; - - pm8921_lvs1: lvs1 {}; - pm8921_lvs2: lvs2 {}; - pm8921_lvs3: lvs3 {}; - pm8921_lvs4: lvs4 {}; - pm8921_lvs5: lvs5 {}; - pm8921_lvs6: lvs6 {}; - pm8921_lvs7: lvs7 {}; - - pm8921_usb_switch: usb-switch {}; - - pm8921_hdmi_switch: hdmi-switch { - bias-pull-down; - }; - - pm8921_ncp: ncp {}; - }; }; usb1: usb@12500000 { @@ -1472,7 +1284,7 @@ qcom,ncb = <3>; }; - pcie: pci@1b500000 { + pcie: pcie@1b500000 { compatible = "qcom,pcie-apq8064"; reg = <0x1b500000 0x1000>, <0x1b502000 0x80>, @@ -1623,10 +1435,6 @@ memory-region = <&wcnss_mem>; - vddcx-supply = <&pm8921_s3>; - vddmx-supply = <&pm8921_l24>; - vddpx-supply = <&pm8921_s4>; - status = "disabled"; iris { @@ -1634,11 +1442,6 @@ clocks = <&cxo_board>; clock-names = "xo"; - - vddxo-supply = <&pm8921_l4>; - vddrfa-supply = <&pm8921_s2>; - vddpa-supply = <&pm8921_l10>; - vdddig-supply = <&pm8921_lvs2>; }; smd-edge { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts index 6d1b2439ae3a..6fce0112361f 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8074-dragonboard.dts @@ -4,8 +4,8 @@ #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" /delete-node/ &mpss_region; @@ -49,6 +49,33 @@ no-map; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_uart2 { @@ -403,6 +430,10 @@ pinctrl-1 = <&sdc2_off>; }; +&smbb { + status = "okay"; +}; + &tlmm { sdc1_on: sdc1-on-state { clk-pins { diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts index 116e59a3b76d..1df24c922be9 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8084-ifc6540.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-apq8084.dtsi" -#include "qcom-pma8084.dtsi" +#include "pma8084.dtsi" / { model = "Qualcomm APQ8084/IFC6540"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts index c6b6680248a6..d4e6aee034af 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8084-mtp.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-apq8084.dtsi" -#include "qcom-pma8084.dtsi" +#include "pma8084.dtsi" / { model = "Qualcomm APQ 8084-MTP"; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi index 468ebc40d2ad..374af6dd360a 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019-ap.dk04.1.dtsi @@ -98,7 +98,7 @@ }; }; - pci@40000000 { + pcie@40000000 { status = "okay"; perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 9844e0b7cff9..f989bd741cd1 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -224,7 +224,7 @@ }; sdhci: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,ipq4019-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x11c>, <0x7824000 0x800>; reg-names = "hc", "core"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; @@ -417,7 +417,7 @@ reg = <0x4ab000 0x4>; }; - pcie0: pci@40000000 { + pcie0: pcie@40000000 { compatible = "qcom,pcie-ipq4019"; reg = <0x40000000 0xf1d>, <0x40000f20 0xa8>, diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index 6198f42f6a9c..6a7f4dd0f775 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -366,7 +366,7 @@ }; }; - qcom,ssbi@500000 { + ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x00500000 0x1000>; qcom,controller-type = "pmic-arbiter"; @@ -1076,7 +1076,7 @@ status = "disabled"; }; - pcie0: pci@1b500000 { + pcie0: pcie@1b500000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b500000 0x1000 0x1b502000 0x80 @@ -1127,7 +1127,7 @@ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; }; - pcie1: pci@1b700000 { + pcie1: pcie@1b700000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b700000 0x1000 0x1b702000 0x80 @@ -1178,7 +1178,7 @@ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; }; - pcie2: pci@1b900000 { + pcie2: pcie@1b900000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b900000 0x1000 0x1b902000 0x80 diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts index b269fdca1460..e3b4b93c3d38 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548-mangoh-green.dts @@ -6,11 +6,11 @@ * Author : Neil Armstrong <narmstrong@baylibre.com> */ +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "qcom-mdm9615-wp8548.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> / { model = "MangOH Green with WP8548 Module"; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi index 92c8003dac25..0dd52cac0e2e 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615-wp8548.dtsi @@ -7,6 +7,7 @@ */ #include "qcom-mdm9615.dtsi" +#include "pm8018.dtsi" / { model = "Sierra Wireless WP8548 Module"; @@ -76,7 +77,11 @@ }; }; -&pmicgpio { +&pm8018 { + interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pm8018_gpio { usb_vbus_5v_pins: usb-vbus-5v-state { pins = "gpio4"; function = "normal"; @@ -129,6 +134,142 @@ pinctrl-names = "default"; }; +&rpm { + regulators { + compatible = "qcom,rpm-pm8018-regulators"; + + vin_lvs1-supply = <&pm8018_s3>; + + vdd_l7-supply = <&pm8018_s4>; + vdd_l8-supply = <&pm8018_s3>; + vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; + + /* Buck SMPS */ + pm8018_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s2: s2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s3: s3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s4: s4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s5: s5 { + regulator-always-on; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8018_l2: l2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l3: l3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l4: l4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8018_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8018_l8: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8018_l9: l9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8018_l10: l10 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l11: l11 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l13: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8018_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8018_lvs1: lvs1 { + bias-pull-down; + }; + }; +}; + &sdcc1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index 63e21aa23642..34c60994d026 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -256,57 +256,10 @@ }; }; - qcom,ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8018", "qcom,pm8921"; - interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pwrkey@1c { - compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 IRQ_TYPE_EDGE_RISING>, - <51 IRQ_TYPE_EDGE_RISING>; - debounce = <15625>; - pull-up; - }; - - pmicmpp: mpps@50 { - compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pmicmpp 0 0 6>; - }; - - rtc@11d { - compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 IRQ_TYPE_EDGE_RISING>; - reg = <0x11d>; - allow-set-time; - }; - - pmicgpio: gpio@150 { - compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pmicgpio 0 0 6>; - #gpio-cells = <2>; - }; - }; }; sdcc1bam: dma-controller@12182000 { @@ -383,140 +336,6 @@ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8018-regulators"; - - vin_lvs1-supply = <&pm8018_s3>; - - vdd_l7-supply = <&pm8018_s4>; - vdd_l8-supply = <&pm8018_s3>; - vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; - - /* Buck SMPS */ - pm8018_s1: s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s2: s2 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s3: s3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s4: s4 { - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2200000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - pm8018_s5: s5 { - regulator-always-on; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - }; - - /* PMOS LDO */ - pm8018_l2: l2 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8018_l3: l3 { - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - pm8018_l4: l4 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - bias-pull-down; - }; - - pm8018_l5: l5 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8018_l6: l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - pm8018_l7: l7 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1900000>; - bias-pull-down; - }; - - pm8018_l8: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - bias-pull-down; - }; - - pm8018_l9: l9 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1150000>; - bias-pull-down; - }; - - pm8018_l10: l10 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l11: l11 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l12: l12 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - bias-pull-down; - }; - - pm8018_l13: l13 { - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <2950000>; - bias-pull-down; - }; - - pm8018_l14: l14 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - bias-pull-down; - }; - - /* Low Voltage Switch */ - pm8018_lvs1: lvs1 { - bias-pull-down; - }; - }; }; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi new file mode 100644 index 000000000000..525d8c608b06 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Common Board Device Tree for Microsoft MSM8x26-based Lumias + * + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" +#include <dt-bindings/input/input.h> + +/* + * Delete all generic (msm8226.dtsi) reserved + * memory mappings which are different on these devices. + */ +/delete-node/ &smem_region; + +/ { + aliases { + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* microSD */ + display0 = &framebuffer; + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x3200000 0x800000>; + format = "a8r8g8b8"; + width = <720>; + height = <1280>; + stride = <(720 * 4)>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + /* + * This device being a WP platform has a different + * memory layout than other Android based devices. + * This smem memory region is directly copied from + * the original UEFI firmware. + */ + reserved-memory { + display_reserved: framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + /* These values were taken from the original firmware DSDT */ + pm8226_s1: s1 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8226_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2075000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <3000000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + touchscreen_default: touchscreen-default-state { + irq-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + reset-pins { + pins = "gpio16"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + output-high; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts new file mode 100644 index 000000000000..2c664b5934ec --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-dempsey.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640"; + compatible = "microsoft,dempsey", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts new file mode 100644 index 000000000000..731c5c375678 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-makepeace.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Microsoft Lumia 640 XL"; + compatible = "microsoft,makepeace", "qcom,msm8226"; + chassis-type = "handset"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts new file mode 100644 index 000000000000..992b7115b5f8 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-moneypenny.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/ { + model = "Nokia Lumia 630"; + compatible = "microsoft,moneypenny", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&framebuffer { + width = <480>; + height = <854>; + stride = <(480 * 4)>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 97a377b5a0ec..b492c95e5d30 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -442,8 +442,8 @@ <&gcc GPLL0_VOTE>, <&gcc GPLL1_VOTE>, <&rpmcc RPM_SMD_GFX3D_CLK_SRC>, - <0>, - <0>; + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>; clock-names = "xo", "mmss_gpll0_vote", "gpll0_vote", @@ -875,8 +875,8 @@ offset = <0x65c>; mode-bootloader = <0x77665500>; - mode-normal = <0x77665501>; - mode-recovery = <0x77665502>; + mode-normal = <0x77665501>; + mode-recovery = <0x77665502>; }; }; @@ -1006,6 +1006,46 @@ "ref"; }; }; + + gpu: adreno@fdb00000 { + compatible = "qcom,adreno-305.18", "qcom,adreno"; + reg = <0xfdb00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "kgsl_3d0_irq"; + + clocks = <&mmcc OXILI_GFX3D_CLK>, + <&mmcc OXILICX_AHB_CLK>, + <&mmcc OXILICX_AXI_CLK>; + clock-names = "core", "iface", "mem_iface"; + + sram = <&gmu_sram>; + power-domains = <&mmcc OXILICX_GDSC>; + operating-points-v2 = <&gpu_opp_table>; + + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + }; + + opp-320000000 { + opp-hz = /bits/ 64 <320000000>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + }; + + opp-19000000 { + opp-hz = /bits/ 64 <19000000>; + }; + }; + }; }; thermal-zones { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts index be18f1be29a1..69fe651f564d 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8660-surf.dts @@ -2,6 +2,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8660.dtsi" +#include "pm8058.dtsi" / { model = "Qualcomm MSM8660 SURF"; @@ -35,30 +36,42 @@ }; &pm8058 { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_FN_F1) - MATRIX_KEY(0, 1, KEY_UP) - MATRIX_KEY(0, 2, KEY_LEFT) - MATRIX_KEY(0, 3, KEY_VOLUMEUP) - MATRIX_KEY(1, 0, KEY_FN_F2) - MATRIX_KEY(1, 1, KEY_RIGHT) - MATRIX_KEY(1, 2, KEY_DOWN) - MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) - MATRIX_KEY(2, 3, KEY_ENTER) - MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) - MATRIX_KEY(4, 1, KEY_UP) - MATRIX_KEY(4, 2, KEY_LEFT) - MATRIX_KEY(4, 3, KEY_HOME) - MATRIX_KEY(4, 4, KEY_FN_F3) - MATRIX_KEY(5, 0, KEY_CAMERA) - MATRIX_KEY(5, 1, KEY_RIGHT) - MATRIX_KEY(5, 2, KEY_DOWN) - MATRIX_KEY(5, 3, KEY_BACK) - MATRIX_KEY(5, 4, KEY_MENU) - >; - keypad,num-rows = <6>; - keypad,num-columns = <5>; + interrupts-extended = <&tlmm 88 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8058_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_FN_F1) + MATRIX_KEY(0, 1, KEY_UP) + MATRIX_KEY(0, 2, KEY_LEFT) + MATRIX_KEY(0, 3, KEY_VOLUMEUP) + MATRIX_KEY(1, 0, KEY_FN_F2) + MATRIX_KEY(1, 1, KEY_RIGHT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_VOLUMEDOWN) + MATRIX_KEY(2, 3, KEY_ENTER) + MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS) + MATRIX_KEY(4, 1, KEY_UP) + MATRIX_KEY(4, 2, KEY_LEFT) + MATRIX_KEY(4, 3, KEY_HOME) + MATRIX_KEY(4, 4, KEY_FN_F3) + MATRIX_KEY(5, 0, KEY_CAMERA) + MATRIX_KEY(5, 1, KEY_RIGHT) + MATRIX_KEY(5, 2, KEY_DOWN) + MATRIX_KEY(5, 3, KEY_BACK) + MATRIX_KEY(5, 4, KEY_MENU) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; +}; + +&rpm { + regulators-0 { + compatible = "qcom,rpm-pm8901-regulators"; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8058-regulators"; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 78023ed2fdf7..a7c245b9c8f9 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -73,22 +73,6 @@ }; }; - /* - * These channels from the ADC are simply hardware monitors. - * That is why the ADC is referred to as "HKADC" - HouseKeeping - * ADC. - */ - iio-hwmon { - compatible = "iio-hwmon"; - io-channels = <&xoadc 0x00 0x01>, /* Battery */ - <&xoadc 0x00 0x02>, /* DC in (charger) */ - <&xoadc 0x00 0x04>, /* VPH the main system voltage */ - <&xoadc 0x00 0x0b>, /* Die temperature */ - <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */ - <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */ - <&xoadc 0x00 0x0e>; /* Reference voltage 0.325V */ - }; - soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -334,143 +318,10 @@ status = "disabled"; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pm8058: pmic { - compatible = "qcom,pm8058"; - interrupt-parent = <&tlmm>; - interrupts = <88 8>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pm8058_gpio: gpio@150 { - compatible = "qcom,pm8058-gpio", - "qcom,ssbi-gpio"; - reg = <0x150>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - gpio-ranges = <&pm8058_gpio 0 0 44>; - #gpio-cells = <2>; - - }; - - pm8058_mpps: mpps@50 { - compatible = "qcom,pm8058-mpp", - "qcom,ssbi-mpp"; - reg = <0x50>; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pm8058_mpps 0 0 12>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - pwrkey@1c { - compatible = "qcom,pm8058-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pm8058>; - interrupts = <50 1>, <51 1>; - debounce = <15625>; - pull-up; - }; - - pm8058_keypad: keypad@148 { - compatible = "qcom,pm8058-keypad"; - reg = <0x148>; - interrupt-parent = <&pm8058>; - interrupts = <74 1>, <75 1>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - xoadc: xoadc@197 { - compatible = "qcom,pm8058-adc"; - reg = <0x197>; - interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>; - #address-cells = <2>; - #size-cells = <0>; - #io-channel-cells = <2>; - - vcoin: adc-channel@0 { - reg = <0x00 0x00>; - }; - vbat: adc-channel@1 { - reg = <0x00 0x01>; - }; - dcin: adc-channel@2 { - reg = <0x00 0x02>; - }; - ichg: adc-channel@3 { - reg = <0x00 0x03>; - }; - vph_pwr: adc-channel@4 { - reg = <0x00 0x04>; - }; - usb_vbus: adc-channel@a { - reg = <0x00 0x0a>; - }; - die_temp: adc-channel@b { - reg = <0x00 0x0b>; - }; - ref_625mv: adc-channel@c { - reg = <0x00 0x0c>; - }; - ref_1250mv: adc-channel@d { - reg = <0x00 0x0d>; - }; - ref_325mv: adc-channel@e { - reg = <0x00 0x0e>; - }; - ref_muxoff: adc-channel@f { - reg = <0x00 0x0f>; - }; - }; - - rtc@1e8 { - compatible = "qcom,pm8058-rtc"; - reg = <0x1e8>; - interrupt-parent = <&pm8058>; - interrupts = <39 1>; - allow-set-time; - }; - - vibrator@4a { - compatible = "qcom,pm8058-vib"; - reg = <0x4a>; - }; - - pm8058_led48: led@48 { - compatible = "qcom,pm8058-keypad-led"; - reg = <0x48>; - status = "disabled"; - }; - - pm8058_led131: led@131 { - compatible = "qcom,pm8058-led"; - reg = <0x131>; - status = "disabled"; - }; - - pm8058_led132: led@132 { - compatible = "qcom,pm8058-led"; - reg = <0x132>; - status = "disabled"; - }; - - pm8058_led133: led@133 { - compatible = "qcom,pm8058-led"; - reg = <0x133>; - status = "disabled"; - }; - - }; }; l2cc: clock-controller@2082000 { @@ -496,72 +347,6 @@ clocks = <&pxo_board>; clock-names = "pxo"; }; - - regulators-0 { - compatible = "qcom,rpm-pm8901-regulators"; - - pm8901_l0: l0 {}; - pm8901_l1: l1 {}; - pm8901_l2: l2 {}; - pm8901_l3: l3 {}; - pm8901_l4: l4 {}; - pm8901_l5: l5 {}; - pm8901_l6: l6 {}; - - /* S0 and S1 Handled as SAW regulators by SPM */ - pm8901_s2: s2 {}; - pm8901_s3: s3 {}; - pm8901_s4: s4 {}; - - pm8901_lvs0: lvs0 {}; - pm8901_lvs1: lvs1 {}; - pm8901_lvs2: lvs2 {}; - pm8901_lvs3: lvs3 {}; - - pm8901_mvs: mvs {}; - }; - - regulators-1 { - compatible = "qcom,rpm-pm8058-regulators"; - - pm8058_l0: l0 {}; - pm8058_l1: l1 {}; - pm8058_l2: l2 {}; - pm8058_l3: l3 {}; - pm8058_l4: l4 {}; - pm8058_l5: l5 {}; - pm8058_l6: l6 {}; - pm8058_l7: l7 {}; - pm8058_l8: l8 {}; - pm8058_l9: l9 {}; - pm8058_l10: l10 {}; - pm8058_l11: l11 {}; - pm8058_l12: l12 {}; - pm8058_l13: l13 {}; - pm8058_l14: l14 {}; - pm8058_l15: l15 {}; - pm8058_l16: l16 {}; - pm8058_l17: l17 {}; - pm8058_l18: l18 {}; - pm8058_l19: l19 {}; - pm8058_l20: l20 {}; - pm8058_l21: l21 {}; - pm8058_l22: l22 {}; - pm8058_l23: l23 {}; - pm8058_l24: l24 {}; - pm8058_l25: l25 {}; - - pm8058_s0: s0 {}; - pm8058_s1: s1 {}; - pm8058_s2: s2 {}; - pm8058_s3: s3 {}; - pm8058_s4: s4 {}; - - pm8058_lvs0: lvs0 {}; - pm8058_lvs1: lvs1 {}; - - pm8058_ncp: ncp {}; - }; }; amba { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts new file mode 100644 index 000000000000..ed328b24335f --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-htc-memul.dts @@ -0,0 +1,372 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Luca Weiss <luca@z3ntu.xyz> + */ + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "HTC One Mini 2"; + compatible = "htc,memul", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-power { + label = "Power"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + unknown@5b00000 { + reg = <0x05b00000 0x200000>; + no-map; + }; + + unknown@7500000 { + reg = <0x07500000 0xb00000>; + no-map; + }; + + mpss_region: mpss@8000000 { + reg = <0x08000000 0x4f00000>; + no-map; + }; + + unknown@cf00000 { + reg = <0x0cf00000 0x200000>; + no-map; + }; + + mba_region: mba@d100000 { + reg = <0x0d100000 0x3a000>; + no-map; + }; + + unknown@d13a000 { + reg = <0x0d13a000 0xc6000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x650000>; + no-map; + }; + + unknown@d850000 { + reg = <0x0d850000 0x3b0000>; + no-map; + }; + + adsp_region: adsp@dc00000 { + reg = <0x0dc00000 0x1400000>; + no-map; + }; + + unknown@f000000 { + reg = <0x0f000000 0x500000>; + no-map; + }; + + venus_region: venus@f500000 { + reg = <0x0f500000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + unknown@fb00000 { + reg = <0x0fb00000 0x1b00000>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/msm8926/memul/adsp.mbn"; + status = "okay"; +}; + +&blsp1_i2c2 { + status = "okay"; + + magnetometer@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_l28>; + }; + + accelerometer@18 { + compatible = "bosch,bma250e"; + reg = <0x18>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_l28>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + /* TFA9887 @ 34 */ + /* TFA9887 @ 35 */ +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + + syna,startup-delay-ms = <160>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c6 { + status = "okay"; + + /* NCP6924 Camera Regulators @ 10 */ + /* PN544 NFC @ 28 */ + /* TPS61310 Flash/Torch @ 33 */ +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <1750000>; + qcom,fast-charge-current-limit = <1750000>; + qcom,fast-charge-safe-voltage = <4360000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4300000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts new file mode 100644 index 000000000000..9b48661d69c5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-superman-lte.dts @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c3 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 735"; + compatible = "microsoft,superman-lte", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c3 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts new file mode 100644 index 000000000000..53a6d4e85959 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-microsoft-tesla.dts @@ -0,0 +1,67 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Jack Matthews <jm5112356@gmail.com> + * Copyright (c) 2023, Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> + * Copyright (c) 2023, Dominik Kobinski <dominikkobinski314@gmail.com> + * Copyright (c) 2023, Rayyan Ansari <rayyan@ansari.sh> + */ + +/dts-v1/; + +#include "qcom-msm8226-microsoft-common.dtsi" + +/* This device has touchscreen on i2c1 instead */ +/delete-node/ &touchscreen; + +/ { + model = "Nokia Lumia 830"; + compatible = "microsoft,tesla", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; +}; + +&blsp1_i2c1 { + status = "okay"; + + touchscreen: touchscreen@4b { + compatible = "syna,rmi4-i2c"; + reg = <0x4b>; + + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l15>; + vio-supply = <&pm8226_l6>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5 { + status = "disabled"; +}; + +&gpio_keys { + key-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + }; + + key-camera-focus { + label = "Camera Focus"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts new file mode 100644 index 000000000000..0cbe2d2fbbb1 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Motorola Moto G 4G (2013)"; + compatible = "motorola,peregrine", "qcom,msm8926", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <720>; + height = <1280>; + stride = <(720 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + sensor@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&pm8226_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8226_vib { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + }; + + pm8226_lvs1: lvs1 { + /* Pull-up for I2C lines */ + regulator-always-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 115 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&smbb { + qcom,fast-charge-safe-current = <2000000>; + qcom,fast-charge-current-limit = <1900000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,minimum-input-voltage = <4300000>; + + status = "okay"; +}; + +&usb { + extcon = <&smbb>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&smbb>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts index 6c1bc3818883..36f4c997b0b3 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts @@ -2,6 +2,7 @@ #include <dt-bindings/input/input.h> #include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" / { model = "Qualcomm MSM8960 CDP"; @@ -88,17 +89,21 @@ }; }; -&pmicintc { - keypad@148 { - linux,keymap = < - MATRIX_KEY(0, 0, KEY_VOLUMEUP) - MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) - MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) - MATRIX_KEY(0, 3, KEY_CAMERA) - >; - keypad,num-rows = <1>; - keypad,num-columns = <5>; - }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&pm8921_keypad { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_VOLUMEUP) + MATRIX_KEY(0, 1, KEY_VOLUMEDOWN) + MATRIX_KEY(0, 2, KEY_CAMERA_FOCUS) + MATRIX_KEY(0, 3, KEY_CAMERA) + >; + keypad,num-rows = <1>; + keypad,num-columns = <5>; + + status = "okay"; }; &rpm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts index 13e85c287498..1a5116336ff0 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/input/input.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> #include "qcom-msm8960.dtsi" -#include <dt-bindings/reset/qcom,gcc-msm8960.h> +#include "pm8921.dtsi" / { model = "Samsung Galaxy Express SGH-I437"; @@ -84,6 +85,10 @@ }; }; +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + &rpm { regulators { compatible = "qcom,rpm-pm8921-regulators"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index d13080fcbeea..f420740e068e 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -200,10 +200,6 @@ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - }; }; acc0: clock-controller@2088000 { @@ -259,49 +255,10 @@ }; }; - ssbi@500000 { + ssbi: ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; qcom,controller-type = "pmic-arbiter"; - - pmicintc: pmic { - compatible = "qcom,pm8921"; - interrupt-parent = <&msmgpio>; - interrupts = <104 IRQ_TYPE_LEVEL_LOW>; - #interrupt-cells = <2>; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - - pwrkey@1c { - compatible = "qcom,pm8921-pwrkey"; - reg = <0x1c>; - interrupt-parent = <&pmicintc>; - interrupts = <50 IRQ_TYPE_EDGE_RISING>, - <51 IRQ_TYPE_EDGE_RISING>; - debounce = <15625>; - pull-up; - }; - - keypad@148 { - compatible = "qcom,pm8921-keypad"; - reg = <0x148>; - interrupt-parent = <&pmicintc>; - interrupts = <74 IRQ_TYPE_EDGE_RISING>, - <75 IRQ_TYPE_EDGE_RISING>; - debounce = <15>; - scan-delay = <32>; - row-hold = <91500>; - }; - - rtc@11d { - compatible = "qcom,pm8921-rtc"; - interrupt-parent = <&pmicintc>; - interrupts = <39 IRQ_TYPE_EDGE_RISING>; - reg = <0x11d>; - allow-set-time; - }; - }; }; rng@1a500000 { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index 60bdfddeae69..4aaae8537a3f 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -60,6 +60,33 @@ enable-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>; }; + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -340,6 +367,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -347,6 +375,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi index 68a2f9094e53..d34659ebac22 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-sony-xperia-rhine.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -65,6 +65,33 @@ pmsg-size = <0x80000>; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -190,6 +217,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -197,6 +225,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { @@ -425,6 +454,8 @@ qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 0bc2e66d15b1..b1413983787c 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -346,6 +346,20 @@ reg = <0xf9011000 0x1000>; }; + saw_l2: power-controller@f9012000 { + compatible = "qcom,saw2"; + reg = <0xf9012000 0x1000>; + regulator; + }; + + watchdog@f9017000 { + compatible = "qcom,apss-wdt-msm8974", "qcom,kpss-wdt"; + reg = <0xf9017000 0x1000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; + clocks = <&sleep_clk>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -405,52 +419,46 @@ }; }; - saw0: power-controller@f9089000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; - }; - - saw1: power-controller@f9099000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; - }; - - saw2: power-controller@f90a9000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw3: power-controller@f90b9000 { - compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; - reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; - }; - - saw_l2: power-controller@f9012000 { - compatible = "qcom,saw2"; - reg = <0xf9012000 0x1000>; - regulator; - }; - acc0: power-manager@f9088000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>; }; + saw0: power-controller@f9089000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>; + }; + acc1: power-manager@f9098000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>; }; + saw1: power-controller@f9099000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>; + }; + acc2: power-manager@f90a8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>; }; + saw2: power-controller@f90a9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>; + }; + acc3: power-manager@f90b8000 { compatible = "qcom,kpss-acc-v2"; reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>; }; + saw3: power-controller@f90b9000 { + compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2"; + reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>; + }; + sdhc_1: mmc@f9824900 { compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; @@ -1063,6 +1071,15 @@ }; }; + bimc: interconnect@fc380000 { + reg = <0xfc380000 0x6a000>; + compatible = "qcom,msm8974-bimc"; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; @@ -1101,22 +1118,13 @@ }; }; - bimc: interconnect@fc380000 { - reg = <0xfc380000 0x6a000>; - compatible = "qcom,msm8974-bimc"; - #interconnect-cells = <1>; - clock-names = "bus", "bus_a"; - clocks = <&rpmcc RPM_SMD_BIMC_CLK>, - <&rpmcc RPM_SMD_BIMC_A_CLK>; - }; - snoc: interconnect@fc460000 { reg = <0xfc460000 0x4000>; compatible = "qcom,msm8974-snoc"; #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_SNOC_CLK>, - <&rpmcc RPM_SMD_SNOC_A_CLK>; + <&rpmcc RPM_SMD_SNOC_A_CLK>; }; pnoc: interconnect@fc468000 { @@ -1125,7 +1133,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_PNOC_CLK>, - <&rpmcc RPM_SMD_PNOC_A_CLK>; + <&rpmcc RPM_SMD_PNOC_A_CLK>; }; ocmemnoc: interconnect@fc470000 { @@ -1134,7 +1142,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>, - <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; + <&rpmcc RPM_SMD_OCMEMGX_A_CLK>; }; mmssnoc: interconnect@fc478000 { @@ -1143,7 +1151,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&mmcc MMSS_S0_AXI_CLK>, - <&mmcc MMSS_S0_AXI_CLK>; + <&mmcc MMSS_S0_AXI_CLK>; }; cnoc: interconnect@fc480000 { @@ -1152,7 +1160,7 @@ #interconnect-cells = <1>; clock-names = "bus", "bus_a"; clocks = <&rpmcc RPM_SMD_CNOC_CLK>, - <&rpmcc RPM_SMD_CNOC_A_CLK>; + <&rpmcc RPM_SMD_CNOC_A_CLK>; }; tsens: thermal-sensor@fc4a9000 { @@ -1633,13 +1641,6 @@ bias-pull-up; drive-strength = <2>; }; - - cd-pins { - pins = "gpio54"; - function = "gpio"; - bias-disable; - drive-strength = <2>; - }; }; blsp1_uart2_default: blsp1-uart2-default-state { @@ -2408,31 +2409,4 @@ <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; - - vreg_boost: vreg-boost { - compatible = "regulator-fixed"; - - regulator-name = "vreg-boost"; - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3150000>; - - regulator-always-on; - regulator-boot-on; - - gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; - enable-active-high; - - pinctrl-names = "default"; - pinctrl-0 = <&boost_bypass_n_pin>; - }; - - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - regulator-name = "vph-pwr"; - - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; - - regulator-always-on; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts index 42d253b75dad..fe227fd3f908 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -57,6 +57,33 @@ enable-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; vcc-supply = <&pm8941_l18>; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -381,6 +408,8 @@ qcom,fast-charge-high-threshold-voltage = <4350000>; qcom,auto-recharge-threshold-voltage = <4240000>; qcom,minimum-input-voltage = <4450000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts index 8230d0e1d95d..4c8edadea0ac 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-oneplus-bacon.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -51,6 +51,33 @@ debounce-interval = <150>; }; }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c1 { @@ -433,6 +460,10 @@ status = "okay"; }; +&smbb { + status = "okay"; +}; + &tlmm { gpio_hall_sensor_default: gpio-hall-sensor-default-state { pins = "gpio68"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts index 3e2c86591ee2..b93539e2b87e 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974pro.dtsi" -#include "qcom-pma8084.dtsi" +#include "pma8084.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/leds/common.h> @@ -155,7 +155,15 @@ enable-active-high; }; - /delete-node/ vreg-boost; + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; &blsp1_i2c2 { @@ -355,7 +363,6 @@ vddr-supply = <&vreg_panel>; reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>; - te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; port { panel_in: endpoint { diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 11468d1409f7..ee94741a26ed 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-msm8974pro.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> @@ -84,6 +84,33 @@ pinctrl-0 = <&lcd_dcdc_en_pin_a>; }; + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&boost_bypass_n_pin>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; + vreg_wlan: wlan-regulator { compatible = "regulator-fixed"; @@ -297,6 +324,7 @@ &remoteproc_adsp { cx-supply = <&pm8841_s2>; + status = "okay"; }; &remoteproc_mss { @@ -304,6 +332,7 @@ mss-supply = <&pm8841_s3>; mx-supply = <&pm8841_s1>; pll-supply = <&pm8941_l12>; + status = "okay"; }; &rpm_requests { @@ -558,6 +587,8 @@ qcom,fast-charge-low-threshold-voltage = <3400000>; qcom,auto-recharge-threshold-voltage = <4200000>; qcom,minimum-input-voltage = <4300000>; + + status = "okay"; }; &tlmm { diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts index 7e97ad5803d8..247069361909 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts +++ b/arch/arm/boot/dts/qcom/qcom-sdx55-mtp.dts @@ -9,7 +9,7 @@ #include "qcom-sdx55.dtsi" #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <arm64/qcom/pm8150b.dtsi> -#include "qcom-pmx55.dtsi" +#include "pmx55.dtsi" / { model = "Qualcomm Technologies, Inc. SDX55 MTP"; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts index 51058b065279..082f7ed1a01f 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts +++ b/arch/arm/boot/dts/qcom/qcom-sdx55-t55.dts @@ -8,7 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "qcom-sdx55.dtsi" -#include "qcom-pmx55.dtsi" +#include "pmx55.dtsi" / { model = "Thundercomm T55 Development Kit"; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts index 8fadc6e70692..e336a15b45c4 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts +++ b/arch/arm/boot/dts/qcom/qcom-sdx55-telit-fn980-tlb.dts @@ -8,7 +8,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "qcom-sdx55.dtsi" -#include "qcom-pmx55.dtsi" +#include "pmx55.dtsi" / { model = "Telit FN980 TLB"; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi index 2aa5089a8513..2045fc779f88 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi @@ -228,31 +228,26 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx55-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; - - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; - - usb_ssphy: phy@ff6200 { - reg = <0x00ff6200 0x170>, - <0x00ff6400 0x200>, - <0x00ff6800 0x800>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + status = "disabled"; }; mc_virt: interconnect@1100000 { @@ -436,9 +431,9 @@ status = "disabled"; }; - pcie_phy: phy@1c07000 { + pcie_phy: phy@1c06000 { compatible = "qcom,sdx55-qmp-pcie-phy"; - reg = <0x01c07000 0x2000>; + reg = <0x01c06000 0x2000>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -585,10 +580,10 @@ <&gcc GCC_USB30_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 51 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -603,7 +598,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -612,7 +607,7 @@ compatible = "qcom,sdx55-pdc", "qcom,pdc"; reg = <0x0b210000 0x30000>; qcom,pdc-ranges = <0 179 52>; - #interrupt-cells = <3>; + #interrupt-cells = <2>; interrupt-parent = <&intc>; interrupt-controller; }; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts index 9649c859a2c3..07c10c84eefa 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts @@ -12,7 +12,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <arm64/qcom/pmk8350.dtsi> #include <arm64/qcom/pm7250b.dtsi> -#include "qcom-pmx65.dtsi" +#include "pmx65.dtsi" / { model = "Qualcomm Technologies, Inc. SDX65 MTP"; diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index e559adaaeee7..40591a4da6a4 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -204,8 +204,16 @@ gcc: clock-controller@100000 { compatible = "qcom,gcc-sdx65"; reg = <0x00100000 0x001f7400>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_phy>, + <0>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_pipe_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>; @@ -233,32 +241,27 @@ usb_qmpphy: phy@ff6000 { compatible = "qcom,sdx65-qmp-usb3-uni-phy"; - reg = <0x00ff6000 0x1c8>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00ff6000 0x2000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_EN>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_EN>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_BCR>, - <&gcc GCC_USB3_PHY_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; status = "disabled"; - usb_ssphy: phy@ff6200 { - reg = <0x00ff6e00 0x160>, - <0x00ff7000 0x1ec>, - <0x00ff6200 0x1e00>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; }; system_noc: interconnect@1620000 { @@ -338,7 +341,7 @@ power-domains = <&gcc PCIE_GDSC>; phys = <&pcie_phy>; - phy-names = "pcie-phy"; + phy-names = "pciephy"; max-link-speed = <3>; num-lanes = <2>; @@ -520,7 +523,7 @@ iommus = <&apps_smmu 0x1a0 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_hsphy>, <&usb_ssphy>; + phys = <&usb_hsphy>, <&usb_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -530,7 +533,7 @@ reg = <0x0c264000 0x1000>; }; - spmi_bus: qcom,spmi@c440000 { + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0xd00>, <0xc600000 0x2000000>, diff --git a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi index e10f99278c77..de52218ceaa4 100644 --- a/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/renesas/iwg20d-q7-dbcm-ca.dtsi @@ -27,6 +27,15 @@ }; }; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; }; &can1 { @@ -69,6 +78,12 @@ clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts index d21e00e1f401..e1ac2c161e73 100644 --- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts @@ -132,7 +132,7 @@ i2c-gpio,delay-us = <5>; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>; brightness-levels = <0 1 2 4 8 16 32 64 128 255>; @@ -143,6 +143,18 @@ enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; }; + panel { + compatible = "ampire,am-800480l1tmqw-t00h"; + backlight = <&backlight>; + power-supply = <®_5p0v>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdc0_rgb>; + }; + }; + }; + sound { compatible = "simple-audio-card"; @@ -228,10 +240,22 @@ }; }; -&pfc { +&lcdc0 { pinctrl-0 = <&lcd0_pins>; pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&pfc { ether_pins: ether { groups = "gether_mii", "gether_int"; function = "gether"; diff --git a/arch/arm/boot/dts/renesas/r8a7740.dtsi b/arch/arm/boot/dts/renesas/r8a7740.dtsi index 1b2cf5fa322b..55884ec701f8 100644 --- a/arch/arm/boot/dts/renesas/r8a7740.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7740.dtsi @@ -398,6 +398,61 @@ status = "disabled"; }; + lcdc0: lcd-controller@fe940000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe940000 0x4000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC0>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk0_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc0_rgb: endpoint { + }; + }; + }; + }; + + lcdc1: lcd-controller@fe944000 { + compatible = "renesas,r8a7740-lcdc"; + reg = <0xfe944000 0x4000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7740_CLK_LCDC1>, + <&cpg_clocks R8A7740_CLK_M3>, <&lcdlclk1_clk>, + <&vou_clk>; + clock-names = "fck", "media", "lclk", "video"; + power-domains = <&pd_a4lc>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lcdc1_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcdc1_hdmi: endpoint { + }; + }; + }; + }; + tmu0: timer@fff80000 { compatible = "renesas,tmu-r8a7740", "renesas,tmu"; reg = <0xfff80000 0x2c>; @@ -474,6 +529,16 @@ #clock-cells = <0>; clock-frequency = <0>; }; + lcdlclk0_clk: lcdlclk0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + lcdlclk1_clk: lcdlclk1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts index b1f679da36b2..a0b574398055 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -34,6 +34,15 @@ }; }; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; }; &du { @@ -81,6 +90,12 @@ clock-names = "cec"; pd-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts index c105932f642e..24411044ef6c 100644 --- a/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/renesas/r8a7745-iwg22d-sodimm.dts @@ -182,7 +182,7 @@ VDDIO-supply = <®_3p3v>; }; - stmpe811@44 { + port-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; interrupt-parent = <&gpio4>; @@ -197,7 +197,7 @@ /* internal ADC reference */ st,ref-sel = <0>; - stmpe_touchscreen { + touchscreen { compatible = "st,stmpe-ts"; /* 8 sample average control */ st,ave-ctrl = <3>; diff --git a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts index 08ea149b1ee6..9b13e8d1538b 100644 --- a/arch/arm/boot/dts/renesas/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/renesas/r8a7779-marzen.dts @@ -52,10 +52,10 @@ states = <3300000 1>, <1800000 0>; }; - keyboard-irq { + keypad-0 { compatible = "gpio-keys"; - pinctrl-0 = <&keyboard_irq_pins>; + pinctrl-0 = <&keypad0_pins>; pinctrl-names = "default"; interrupt-parent = <&gpio0>; @@ -76,11 +76,11 @@ }; }; - keyboard-gpio { + keypad-1 { compatible = "gpio-keys-polled"; poll-interval = <50>; - pinctrl-0 = <&keyboard_gpio_pins>; + pinctrl-0 = <&keypad1_pins>; pinctrl-names = "default"; key-3 { @@ -193,7 +193,7 @@ }; &gpio0 { - keyboard-irq-hog { + keypad0-hog { gpio-hog; gpios = <17 GPIO_ACTIVE_LOW>, <18 GPIO_ACTIVE_LOW>; input; @@ -215,6 +215,35 @@ }; &lbsc { + flash@0 { + compatible = "cfi-flash"; + reg = <0x0 0x04000000>; + pinctrl-0 = <&flash_pins>; + pinctrl-names = "default"; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "flash"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; + ethernet@18000000 { compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; @@ -266,6 +295,11 @@ }; }; + flash_pins: flash { + groups = "lbsc_cs0"; + function = "lbsc"; + }; + scif2_pins: scif2 { groups = "scif2_data_c"; function = "scif2"; @@ -286,11 +320,11 @@ function = "hspi0"; }; - keyboard_irq_pins: keyboard-irq { + keypad0_pins: keypad-0 { pins = "GP_0_17", "GP_0_18"; bias-pull-up; }; - keyboard_gpio_pins: keyboard-gpio { + keypad1_pins: keypad-1 { pins = "GP_0_19", "GP_0_20"; bias-pull-up; }; diff --git a/arch/arm/boot/dts/renesas/r8a7790-lager.dts b/arch/arm/boot/dts/renesas/r8a7790-lager.dts index 4d666ad8b114..2fba4d084001 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-lager.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-lager.dts @@ -122,6 +122,15 @@ }; }; + fixedregulator1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -303,7 +312,7 @@ * * IIC0/I2C0 does not appear to support fallback to GPIO. */ - i2cexio0: i2c-10 { + i2cexio0: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; i2c-bus-name = "i2c-exio0"; @@ -316,7 +325,7 @@ * This is similar to the arangement described for i2cexio0 (above) * with a fallback to GPIO also provided. */ - i2cexio1: i2c-11 { + i2cexio1: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-exio1"; @@ -328,7 +337,7 @@ * IIC2 and I2C2 may be switched using pinmux. * A fallback to GPIO is also provided. */ - i2chdmi: i2c-12 { + i2chdmi: i2c-mux3 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic2>, <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -361,6 +370,12 @@ clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <&fixedregulator1v8>; + dvdd-supply = <&fixedregulator1v8>; + pvdd-supply = <&fixedregulator1v8>; + dvdd-3v-supply = <&fixedregulator3v3>; + bgvdd-supply = <&fixedregulator1v8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -417,7 +432,7 @@ * IIC3 and I2C3 may be switched using pinmux. * IIC3/I2C3 does not appear to support fallback to GPIO. */ - i2cpwr: i2c-13 { + i2cpwr: i2c-mux4 { compatible = "i2c-demux-pinctrl"; pinctrl-names = "default"; pinctrl-0 = <&pmic_irq_pins>; diff --git a/arch/arm/boot/dts/renesas/r8a7790-stout.dts b/arch/arm/boot/dts/renesas/r8a7790-stout.dts index fe14727eefe1..f9bc5b4f019d 100644 --- a/arch/arm/boot/dts/renesas/r8a7790-stout.dts +++ b/arch/arm/boot/dts/renesas/r8a7790-stout.dts @@ -44,6 +44,15 @@ }; }; + fixedregulator1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -296,6 +305,12 @@ clocks = <&osc4_clk>; clock-names = "cec"; + avdd-supply = <&fixedregulator1v8>; + dvdd-supply = <&fixedregulator1v8>; + pvdd-supply = <&fixedregulator1v8>; + dvdd-3v-supply = <&fixedregulator3v3>; + bgvdd-supply = <&fixedregulator1v8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts index 545515b41ea3..e9c13bb03772 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-koelsch.dts @@ -174,6 +174,24 @@ }; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -340,7 +358,7 @@ * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). * A fallback to GPIO is provided. */ - i2cexio1: i2c-12 { + i2cexio1: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-exio1"; @@ -351,7 +369,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-13 { + i2chdmi: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -384,6 +402,12 @@ clocks = <&cec_clock>; clock-names = "cec"; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -446,7 +470,7 @@ * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-14 { + i2cexio4: i2c-mux3 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts index ec0a20d5130d..7e8bc06715f6 100644 --- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts +++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts @@ -47,6 +47,24 @@ reg = <2 0x00000000 0 0x40000000>; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -148,7 +166,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-10 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -179,6 +197,12 @@ interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts index e793134f32a3..4f9838cf97ee 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-blanche.dts @@ -30,6 +30,15 @@ reg = <0 0x40000000 0 0x40000000>; }; + d1_8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3_3v: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -182,6 +191,35 @@ }; &lbsc { + flash@0 { + compatible = "cfi-flash"; + reg = <0x00000000 0x04000000>; + pinctrl-0 = <&flash_pins>; + pinctrl-names = "default"; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x00040000 0x00040000>; + read-only; + }; + partition@80000 { + label = "flash"; + reg = <0x00080000 0x03f80000>; + }; + }; + }; + ethernet@18000000 { compatible = "smsc,lan89218", "smsc,lan9115"; reg = <0x18000000 0x100>; @@ -240,6 +278,11 @@ function = "du1"; }; + flash_pins: flash { + groups = "lbsc_cs0"; + function = "lbsc"; + }; + keyboard_pins: keyboard { pins = "GP_3_10", "GP_3_11", "GP_3_12", "GP_3_15", "GP_11_2"; bias-pull-up; @@ -296,6 +339,12 @@ interrupt-parent = <&irqc>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts index f87e78fe3f6e..000f21a2a863 100644 --- a/arch/arm/boot/dts/renesas/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/renesas/r8a7792-wheat.dts @@ -29,6 +29,15 @@ reg = <0 0x40000000 0 0x40000000>; }; + d1_8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3_3v: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -254,6 +263,12 @@ reg = <0x3d>, <0x4d>, <0x2d>, <0x5d>; reg-names = "main", "edid", "cec", "packet"; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -283,6 +298,12 @@ reg = <0x39>, <0x49>, <0x29>, <0x59>; reg-names = "main", "edid", "cec", "packet"; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r8a7793-gose.dts b/arch/arm/boot/dts/renesas/r8a7793-gose.dts index 79b537b24642..1744fdbf9e0c 100644 --- a/arch/arm/boot/dts/renesas/r8a7793-gose.dts +++ b/arch/arm/boot/dts/renesas/r8a7793-gose.dts @@ -165,6 +165,24 @@ }; }; + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -324,7 +342,7 @@ /* * A fallback to GPIO is provided for I2C2. */ - i2chdmi: i2c-11 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c2>, <&gpioi2c2>; i2c-bus-name = "i2c-hdmi"; @@ -368,6 +386,12 @@ interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -430,7 +454,7 @@ * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-12 { + i2cexio4: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-alt.dts b/arch/arm/boot/dts/renesas/r8a7794-alt.dts index 08df031bc27c..c0d067df22a0 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-alt.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-alt.dts @@ -192,7 +192,7 @@ /* * A fallback to GPIO is provided for I2C1. */ - i2chdmi: i2c-11 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-hdmi"; @@ -222,7 +222,7 @@ * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). * A fallback to GPIO is provided. */ - i2cexio4: i2c-14 { + i2cexio4: i2c-mux2 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c4>, <&gpioi2c4>; i2c-bus-name = "i2c-exio4"; diff --git a/arch/arm/boot/dts/renesas/r8a7794-silk.dts b/arch/arm/boot/dts/renesas/r8a7794-silk.dts index b7af1befa126..43d480a7f3ea 100644 --- a/arch/arm/boot/dts/renesas/r8a7794-silk.dts +++ b/arch/arm/boot/dts/renesas/r8a7794-silk.dts @@ -102,6 +102,15 @@ }; }; + d1_8v: regulator-d1-8v { + compatible = "regulator-fixed"; + regulator-name = "D1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3_3v: regulator-d3-3v { compatible = "regulator-fixed"; regulator-name = "D3.3V"; @@ -225,7 +234,7 @@ /* * A fallback to GPIO is provided for I2C1. */ - i2chdmi: i2c-10 { + i2chdmi: i2c-mux1 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&i2c1>, <&gpioi2c1>; i2c-bus-name = "i2c-hdmi"; @@ -256,6 +265,12 @@ interrupt-parent = <&gpio5>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1_8v>; + dvdd-supply = <&d1_8v>; + pvdd-supply = <&d1_8v>; + dvdd-3v-supply = <&d3_3v>; + bgvdd-supply = <&d1_8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 0fa565a1c3ad..fa63e1afc4ef 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -437,7 +437,7 @@ }; can0: can@52104000 { - compatible = "renesas,r9a06g032-sja1000","renesas,rzn1-sja1000"; + compatible = "renesas,r9a06g032-sja1000", "renesas,rzn1-sja1000"; reg = <0x52104000 0x800>; reg-io-width = <4>; interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/rockchip/Makefile b/arch/arm/boot/dts/rockchip/Makefile index 0f46e18fe275..ab4cd9aab722 100644 --- a/arch/arm/boot/dts/rockchip/Makefile +++ b/arch/arm/boot/dts/rockchip/Makefile @@ -2,7 +2,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rv1108-elgin-r1.dtb \ rv1108-evb.dtb \ + rv1109-sonoff-ihost.dtb \ rv1126-edgeble-neu2-io.dtb \ + rv1126-sonoff-ihost.dtb \ rk3036-evb.dtb \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ @@ -10,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ rk3128-evb.dtb \ + rk3128-xpi-3128.dtb \ rk3188-bqedison2qc.dtb \ rk3188-px3-evb.dtb \ rk3188-radxarock.dtb \ diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts index 67e1e04139e7..e32c73d32f0a 100644 --- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts +++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts @@ -8,11 +8,26 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; + chosen { + stdout-path = "serial2:115200n8"; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; + hdmi_con: hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds: gpio-leds { compatible = "gpio-leds"; @@ -110,6 +125,12 @@ status = "okay"; }; +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c1 { clock-frequency = <400000>; diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi index 78686fc72ce6..04af224005f8 100644 --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi @@ -17,6 +17,9 @@ interrupt-parent = <&gic>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -282,7 +285,6 @@ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; - rockchip,default-sample-phase = <158>; disable-wp; dmas = <&pdma 12>; dma-names = "rx-tx"; @@ -402,12 +404,20 @@ pinctrl-0 = <&hdmi_ctl>; status = "disabled"; - hdmi_in: port { + ports { #address-cells = <1>; #size-cells = <0>; - hdmi_in_vop: endpoint@0 { + + hdmi_in: port@0 { reg = <0>; - remote-endpoint = <&vop_out_hdmi>; + + hdmi_in_vop: endpoint { + remote-endpoint = <&vop_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; }; }; }; diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi index de9915d946f7..30139f21de64 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi @@ -13,6 +13,11 @@ / { compatible = "rockchip,rk3066a"; + aliases { + gpio4 = &gpio4; + gpio6 = &gpio6; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/rockchip/rk3128-evb.dts b/arch/arm/boot/dts/rockchip/rk3128-evb.dts index c38f42497cbd..c7ab7fcdb436 100644 --- a/arch/arm/boot/dts/rockchip/rk3128-evb.dts +++ b/arch/arm/boot/dts/rockchip/rk3128-evb.dts @@ -12,11 +12,6 @@ compatible = "rockchip,rk3128-evb", "rockchip,rk3128"; aliases { - gpio0 = &gpio0; - gpio1 = &gpio1; - gpio2 = &gpio2; - gpio3 = &gpio3; - i2c1 = &i2c1; mmc0 = &emmc; }; diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts new file mode 100644 index 000000000000..03a97881519a --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3128.dtsi" + +/ { + model = "Geniatech XPI-3128"; + compatible = "geniatech,xpi-3128", "rockchip,rk3128"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + chosen { + stdout-path = &uart1; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <3300000>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + dc_5v: dc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * This is a vbus-supply, which also supplies the GL852G usb hub, + * thus has to be always-on + */ + host_pwr_5v: host-pwr-5v-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <1500>; + regulator-name = "HOST_PWR_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + pinctrl-names = "default"; + pinctrl-0 = <&host_drv>; + enable-active-high; + regulator-always-on; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + + leds { + compatible = "gpio-leds"; + + led-power { + gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + pinctrl-names = "default"; + pinctrl-0 = <&power_led>; + }; + + led-spd { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + function = LED_FUNCTION_LAN; + color = <LED_COLOR_ID_GREEN>; + /* + * currently not allowed to be set as per + * https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml + * and needs to set in userspace: + * + * linux,default-trigger = "netdev"; + */ + pinctrl-names = "default"; + pinctrl-0 = <&spd_led>; + }; + }; + + mcu3v3: mcu3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "MCU3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_ddr: vcc-ddr-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_io: vcc-io-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_lan: vcc-lan-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_LAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: vcc-sd-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + startup-delay-us = <500>; + regulator-name = "VCC_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwren>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + regulator-always-on; + regulator-boot-on; + }; + + vcc33_hdmi: vcc33-hdmi-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCC33_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcca_33>; + regulator-always-on; + regulator-boot-on; + }; + + vcca_33: vcca-33-regulator { + compatible = "regulator-fixed"; + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_11: vdd-11-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD_11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc_sys>; + regulator-always-on; + regulator-boot-on; + }; + + vdd11_hdmi: vdd11-hdmi-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDD11_HDMI"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vdd_11>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + regulator-name = "VDD_ARM"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + /* + * As per schematics vdd_log is minimum 900 mV, maximum 1400 mV. + * Since there are HW blocks in PD_LOGIC (which are all driven by + * this supply), that either do not have a driver at all or the + * driver does not implement regulator support we have to make + * sure here that the voltage never drops below 1050 mV. + */ + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + regulator-name = "VDD_LOG"; + pwms = <&pwm2 0 25000 1>; + pwm-dutycycle-range = <30 100>; + pwm-supply = <&vcc_sys>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <4000>; + regulator-always-on; + regulator-boot-on; + }; + +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + vmmc-supply = <&vcc_io>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + cap-mmc-highspeed; + mmc-ddr-3_3v; + no-sd; + no-sdio; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + phy-supply = <&vcc_lan>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + assigned-clocks = <&cru SCLK_MAC_SRC>; + assigned-clock-rates= <50000000>; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + status = "okay"; +}; + +&gpio0 { + gpio-line-names = /* GPIO0 A0-A7 */ + "", "", "HEADER_5", "HEADER_3", + "", "", "", "", + /* GPIO0 B0-B7 */ + "HEADER_22", "HEADER_23", "", "HEADER_19", + "HEADER_26", "HEADER_21", "HEADER_24", "", + /* GPIO0 C0-C7 */ + "", "HEADER_18", "", "", + "", "", "", "", + /* GPIO0 D0-D7 */ + "HEADER_36", "", "", "", + "", "", "HEADER_13", ""; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A0-A7 */ + "HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37", + "HEADER_40", "HEADER_38", "", "", + /* GPIO1 B0-B7 */ + "HEADER_11", "", "", "HEADER_29", + "HEADER_31", "", "", "", + /* GPIO1 C0-C7 */ + "", "", "", "", + "", "", "", "", + /* GPIO1 D0-D7 */ + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO2 C0-C7 */ + "", "", "", "", + "HEADER_27", "", "", "", + /* GPIO2 D0-D7 */ + "", "", "HEADER_8", "HEADER_10", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A0-A7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 B0-B7 */ + "", "", "", "", + "", "", "", "", + /* GPIO3 C0-C7 */ + "", "HEADER_32", "", "", + "", "", "", "HEADER_12", + /* GPIO3 D0-D7 */ + "", "", "", "HEADER_15", + "", "", "", ""; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&mdio { + phy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + max-speed = <100>; + /* T2.2.4 min. 1 us */ + reset-assert-us = <10>; + /* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */ + reset-deassert-us = <20>; + reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dp83848c_rst>; + }; +}; + +&pinctrl { + dp83848c { + dp83848c_rst: dp83848c-rst { + rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ir-receiver { + ir_int: ir-int { + rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + power_led: power-led { + rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + spd_led: spd-led { + rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + host_drv: host-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_io>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + vmmc-supply = <&vcc_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; + disable-wp; + cap-sd-highspeed; + no-mmc; + no-sdio; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_otg { + vusb_a-supply = <&vcc_io>; + vusb_d-supply = <&vdd_11>; + status = "okay"; +}; + +&usb2phy { + status = "okay"; +}; + +&usb2phy_host { + status = "okay"; +}; + +&usb2phy_otg { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index 01edf244ddee..e2264c40b924 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3128-power.h> / { compatible = "rockchip,rk3128"; @@ -15,6 +16,20 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + arm-pmu { compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, @@ -100,6 +115,27 @@ }; }; + gpu_opp_table: opp-table-1 { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <975000 975000 1250000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1050000 1050000 1250000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1150000 1150000 1250000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <1250000 1250000 1250000>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, @@ -130,9 +166,119 @@ }; }; + gpu: gpu@10090000 { + compatible = "rockchip,rk3128-mali", "arm,mali-400"; + reg = <0x10090000 0x10000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1"; + clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + resets = <&cru SRST_GPU>; + power-domains = <&power RK3128_PD_GPU>; + status = "disabled"; + }; + pmu: syscon@100a0000 { compatible = "rockchip,rk3128-pmu", "syscon", "simple-mfd"; reg = <0x100a0000 0x1000>; + + power: power-controller { + compatible = "rockchip,rk3128-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + power-domain@RK3128_PD_VIO { + reg = <RK3128_PD_VIO>; + clocks = <&cru ACLK_CIF>, + <&cru HCLK_CIF>, + <&cru DCLK_EBC>, + <&cru HCLK_EBC>, + <&cru ACLK_IEP>, + <&cru HCLK_IEP>, + <&cru ACLK_LCDC0>, + <&cru HCLK_LCDC0>, + <&cru PCLK_MIPI>, + <&cru ACLK_RGA>, + <&cru HCLK_RGA>, + <&cru ACLK_VIO0>, + <&cru ACLK_VIO1>, + <&cru HCLK_VIO>, + <&cru HCLK_VIO_H2P>, + <&cru DCLK_VOP>, + <&cru SCLK_VOP>; + pm_qos = <&qos_ebc>, + <&qos_iep>, + <&qos_lcdc>, + <&qos_rga>, + <&qos_vip>; + #power-domain-cells = <0>; + }; + + power-domain@RK3128_PD_VIDEO { + reg = <RK3128_PD_VIDEO>; + clocks = <&cru ACLK_VDPU>, + <&cru HCLK_VDPU>, + <&cru ACLK_VEPU>, + <&cru HCLK_VEPU>, + <&cru SCLK_HEVC_CORE>; + pm_qos = <&qos_vpu>; + #power-domain-cells = <0>; + }; + + power-domain@RK3128_PD_GPU { + reg = <RK3128_PD_GPU>; + clocks = <&cru ACLK_GPU>; + pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; + }; + }; + }; + + qos_gpu: qos@1012d000 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012d000 0x20>; + }; + + qos_vpu: qos@1012e000 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012e000 0x20>; + }; + + qos_rga: qos@1012f000 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f000 0x20>; + }; + + qos_ebc: qos@1012f080 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f080 0x20>; + }; + + qos_iep: qos@1012f100 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f100 0x20>; + }; + + qos_lcdc: qos@1012f180 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f180 0x20>; + }; + + qos_vip: qos@1012f200 { + compatible = "rockchip,rk3128-qos", "syscon"; + reg = <0x1012f200 0x20>; }; gic: interrupt-controller@10139000 { @@ -154,6 +300,9 @@ clocks = <&cru HCLK_OTG>; clock-names = "otg"; dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <280>; + g-tx-fifo-size = <256 128 128 64 32 16>; phys = <&usb2phy_otg>; phy-names = "usb2-phy"; status = "disabled"; @@ -163,6 +312,7 @@ compatible = "generic-ehci"; reg = <0x101c0000 0x20000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>; phys = <&usb2phy_host>; phy-names = "usb"; status = "disabled"; @@ -172,6 +322,7 @@ compatible = "generic-ohci"; reg = <0x101e0000 0x20000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HOST2>; phys = <&usb2phy_host>; phy-names = "usb"; status = "disabled"; @@ -261,6 +412,8 @@ clocks = <&cru SCLK_OTGPHY0>; clock-names = "phyclk"; clock-output-names = "usb480m_phy"; + assigned-clocks = <&cru SCLK_USB480M>; + assigned-clock-parents = <&usb2phy>; #clock-cells = <0>; status = "disabled"; @@ -518,6 +671,34 @@ #dma-cells = <1>; }; + gmac: ethernet@2008c000 { + compatible = "rockchip,rk3128-gmac"; + reg = <0x2008c000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&cru SCLK_MAC>, + <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, + <&cru SCLK_MAC_REF>, <&cru SCLK_MAC_REFOUT>, + <&cru ACLK_GMAC>, <&cru PCLK_GMAC>; + clock-names = "stmmaceth", + "mac_clk_rx", "mac_clk_tx", + "clk_mac_ref", "clk_mac_refout", + "aclk_mac", "pclk_mac"; + resets = <&cru SRST_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <0x1>; + #size-cells = <0x0>; + }; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3128-pinctrl"; rockchip,grf = <&grf>; @@ -843,6 +1024,10 @@ rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; }; + sdmmc_det: sdmmc-det { + rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>; + }; + sdmmc_wp: sdmmc-wp { rockchip,pins = <1 RK_PA7 1 &pcfg_pull_default>; }; diff --git a/arch/arm/boot/dts/rockchip/rk322x.dtsi b/arch/arm/boot/dts/rockchip/rk322x.dtsi index a721744cbfd1..831561fc1814 100644 --- a/arch/arm/boot/dts/rockchip/rk322x.dtsi +++ b/arch/arm/boot/dts/rockchip/rk322x.dtsi @@ -15,6 +15,10 @@ interrupt-parent = <&gic>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; diff --git a/arch/arm/boot/dts/rockchip/rk3288.dtsi b/arch/arm/boot/dts/rockchip/rk3288.dtsi index cb9cdaddffd4..ead343dc3df1 100644 --- a/arch/arm/boot/dts/rockchip/rk3288.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3288.dtsi @@ -19,6 +19,15 @@ aliases { ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + gpio5 = &gpio5; + gpio6 = &gpio6; + gpio7 = &gpio7; + gpio8 = &gpio8; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi index cb4e42ede56a..f37137f298d5 100644 --- a/arch/arm/boot/dts/rockchip/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3xxx.dtsi @@ -16,6 +16,10 @@ aliases { ethernet0 = &emac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts new file mode 100644 index 000000000000..45dced8087a3 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1109-sonoff-ihost.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include "rv1109.dtsi" +#include "rv1126-sonoff-ihost.dtsi" + +/ { + model = "Sonoff iHost 2G"; + compatible = "itead,sonoff-ihost", "rockchip,rv1109"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1109.dtsi b/arch/arm/boot/dts/rockchip/rv1109.dtsi new file mode 100644 index 000000000000..9cbaa08ab1b8 --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1109.dtsi @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rv1126.dtsi" + +/ { + compatible = "rockchip,rv1109"; + + cpus { + /delete-node/ cpu@f02; + /delete-node/ cpu@f03; + }; + + arm-pmu { + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts index f09be8405964..0c2396b8f8db 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts +++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts @@ -61,7 +61,7 @@ phy-mode = "rgmii"; phy-supply = <&vcc_3v3>; pinctrl-names = "default"; - pinctrl-0 = <&rgmiim1_pins &clk_out_ethernetm1_pins>; + pinctrl-0 = <&rgmiim1_miim &rgmiim1_bus2 &rgmiim1_bus4 &clk_out_ethernetm1_pins>; tx_delay = <0x2a>; rx_delay = <0x1a>; status = "okay"; diff --git a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi index bb34b0c9cb4a..06b1d7f2d858 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126-pinctrl.dtsi @@ -87,6 +87,16 @@ <0 RK_PB5 1 &pcfg_pull_none_drv_level_0_smt>; }; }; + i2c2 { + /omit-if-no-ref/ + i2c2_xfer: i2c2-xfer { + rockchip,pins = + /* i2c2_scl */ + <0 RK_PC2 1 &pcfg_pull_none_drv_level_0_smt>, + /* i2c2_sda */ + <0 RK_PC3 1 &pcfg_pull_none_drv_level_0_smt>; + }; + }; pwm2 { /omit-if-no-ref/ pwm2m0_pins: pwm2m0-pins { @@ -105,36 +115,56 @@ }; rgmii { /omit-if-no-ref/ - rgmiim1_pins: rgmiim1-pins { + rgmiim1_miim: rgmiim1-miim { rockchip,pins = /* rgmii_mdc_m1 */ <2 RK_PC2 2 &pcfg_pull_none>, /* rgmii_mdio_m1 */ - <2 RK_PC1 2 &pcfg_pull_none>, - /* rgmii_rxclk_m1 */ - <2 RK_PD3 2 &pcfg_pull_none>, + <2 RK_PC1 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + rgmiim1_rxer: rgmiim1-rxer { + rockchip,pins = + /* rgmii_rxer_m1 */ + <2 RK_PC0 2 &pcfg_pull_none>; + }; + /omit-if-no-ref/ + rgmiim1_bus2: rgmiim1-bus2 { + rockchip,pins = /* rgmii_rxd0_m1 */ <2 RK_PB5 2 &pcfg_pull_none>, /* rgmii_rxd1_m1 */ <2 RK_PB6 2 &pcfg_pull_none>, - /* rgmii_rxd2_m1 */ - <2 RK_PC7 2 &pcfg_pull_none>, - /* rgmii_rxd3_m1 */ - <2 RK_PD0 2 &pcfg_pull_none>, /* rgmii_rxdv_m1 */ <2 RK_PB4 2 &pcfg_pull_none>, - /* rgmii_txclk_m1 */ - <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd0_m1 */ <2 RK_PC3 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd1_m1 */ <2 RK_PC4 2 &pcfg_pull_none_drv_level_3>, + /* rgmii_txen_m1 */ + <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>; + }; + /omit-if-no-ref/ + rgmiim1_bus4: rgmiim1-bus4 { + rockchip,pins = + /* rgmii_rxclk_m1 */ + <2 RK_PD3 2 &pcfg_pull_none>, + /* rgmii_rxd2_m1 */ + <2 RK_PC7 2 &pcfg_pull_none>, + /* rgmii_rxd3_m1 */ + <2 RK_PD0 2 &pcfg_pull_none>, + /* rgmii_txclk_m1 */ + <2 RK_PD2 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd2_m1 */ <2 RK_PD1 2 &pcfg_pull_none_drv_level_3>, /* rgmii_txd3_m1 */ - <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>, - /* rgmii_txen_m1 */ - <2 RK_PC6 2 &pcfg_pull_none_drv_level_3>; + <2 RK_PA4 2 &pcfg_pull_none_drv_level_3>; + }; + /omit-if-no-ref/ + rgmiim1_mclkinout: rgmiim1-mclkinout { + rockchip,pins = + /* rgmii_clk_m1 */ + <2 RK_PB7 2 &pcfg_pull_none>; }; }; sdmmc0 { @@ -263,6 +293,14 @@ /* uart3_tx_m0 */ <3 RK_PC6 4 &pcfg_pull_up>; }; + /omit-if-no-ref/ + uart3m2_xfer: uart3m2-xfer { + rockchip,pins = + /* uart3_rx_m2 */ + <3 RK_PA1 4 &pcfg_pull_up>, + /* uart3_tx_m2 */ + <3 RK_PA0 4 &pcfg_pull_up>; + }; }; uart4 { /omit-if-no-ref/ @@ -273,6 +311,14 @@ /* uart4_tx_m0 */ <3 RK_PA4 4 &pcfg_pull_up>; }; + /omit-if-no-ref/ + uart4m2_xfer: uart4m2-xfer { + rockchip,pins = + /* uart4_rx_m2 */ + <1 RK_PD4 3 &pcfg_pull_up>, + /* uart4_tx_m2 */ + <1 RK_PD5 3 &pcfg_pull_up>; + }; }; uart5 { /omit-if-no-ref/ diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts new file mode 100644 index 000000000000..77386a48d81e --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; +#include "rv1126.dtsi" +#include "rv1126-sonoff-ihost.dtsi" + +/ { + model = "Sonoff iHost 4G"; + compatible = "itead,sonoff-ihost", "rockchip,rv1126"; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi new file mode 100644 index 000000000000..32b329e87a0c --- /dev/null +++ b/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Rockchip Electronics Co., Ltd. + * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. + */ + +/ { + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + sdio_pwrseq: pwrseq-sdio { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; + }; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_buck5>; + vcc6-supply = <&vcc_buck5>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_npu_vepu: DCDC_REG1 { + regulator-name = "vdd_npu_vepu"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_sys: DCDC_REG4 { + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_buck5: DCDC_REG5 { + regulator-name = "vcc_buck5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2200000>; + }; + }; + + vcc_0v8: LDO_REG1 { + regulator-name = "vcc_0v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmu: LDO_REG2 { + regulator-name = "vcc1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd0v8_pmu: LDO_REG3 { + regulator-name = "vcc0v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <800000>; + }; + }; + + vcc_1v8: LDO_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_dovdd: LDO_REG5 { + regulator-name = "vcc_dovdd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_dvdd: LDO_REG6 { + regulator-name = "vcc_dvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_avdd: LDO_REG7 { + regulator-name = "vcc_avdd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG8 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: LDO_REG9 { + regulator-name = "vcc3v3_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_5v0: SWITCH_REG1 { + regulator-name = "vcc_5v0"; + }; + + vcc_3v3: SWITCH_REG2 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + #clock-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "xin32k"; + }; +}; + +&gmac { + assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>, + <&cru CLK_GMAC_TX_RX>; + assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>, + <&cru RMII_MODE_CLK>; + assigned-clock-rates = <0>, <50000000>; + clock_in_out = "output"; + phy-handle = <&phy>; + phy-mode = "rmii"; + phy-supply = <&vcc_3v3>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>; + status = "okay"; +}; + +&mdio { + phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + pinctrl-names = "default"; + pinctrl-0 = <ð_phy_rst>; + reset-active-low; + reset-assert-us = <50000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + ethernet { + eth_phy_rst: eth-phy-rst { + rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + bt { + bt_enable: bt-enable { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_dev: bt-wake-dev { + rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio0-supply = <&vcc1v8_pmu>; + pmuio1-supply = <&vcc3v3_sys>; + vccio1-supply = <&vcc_1v8>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_1v8>; + vccio4-supply = <&vcc_dovdd>; + vccio5-supply = <&vcc_1v8>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_dovdd>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + max-frequency = <100000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; + rockchip,default-sample-phase = <90>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>; + rockchip,default-sample-phase = <90>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723ds-bt"; + device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */ + enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */ + host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */ + max-speed = <2000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3m2_xfer>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4m2_xfer>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rockchip/rv1126.dtsi b/arch/arm/boot/dts/rockchip/rv1126.dtsi index 9ccd1bad6229..bb603cae13df 100644 --- a/arch/arm/boot/dts/rockchip/rv1126.dtsi +++ b/arch/arm/boot/dts/rockchip/rv1126.dtsi @@ -21,6 +21,13 @@ aliases { i2c0 = &i2c0; + i2c2 = &i2c2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; }; cpus { @@ -231,6 +238,20 @@ status = "disabled"; }; + i2c2: i2c@ff400000 { + compatible = "rockchip,rv1126-i2c", "rockchip,rk3399-i2c"; + reg = <0xff400000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + rockchip,grf = <&pmugrf>; + clocks = <&pmucru CLK_I2C2>, <&pmucru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart1: serial@ff410000 { compatible = "rockchip,rv1126-uart", "snps,dw-apb-uart"; reg = <0xff410000 0x100>; diff --git a/arch/arm/boot/dts/samsung/exynos4.dtsi b/arch/arm/boot/dts/samsung/exynos4.dtsi index f775b9377a38..7f981b5c0d64 100644 --- a/arch/arm/boot/dts/samsung/exynos4.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4.dtsi @@ -203,16 +203,16 @@ camera: camera@11800000 { compatible = "samsung,fimc"; + ranges = <0x0 0x11800000 0xa0000>; status = "disabled"; #address-cells = <1>; #size-cells = <1>; #clock-cells = <1>; clock-output-names = "cam_a_clkout", "cam_b_clkout"; - ranges; - fimc_0: fimc@11800000 { + fimc_0: fimc@0 { compatible = "samsung,exynos4210-fimc"; - reg = <0x11800000 0x1000>; + reg = <0x0 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; @@ -223,9 +223,9 @@ status = "disabled"; }; - fimc_1: fimc@11810000 { + fimc_1: fimc@10000 { compatible = "samsung,exynos4210-fimc"; - reg = <0x11810000 0x1000>; + reg = <0x00010000 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; @@ -236,9 +236,9 @@ status = "disabled"; }; - fimc_2: fimc@11820000 { + fimc_2: fimc@20000 { compatible = "samsung,exynos4210-fimc"; - reg = <0x11820000 0x1000>; + reg = <0x00020000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; @@ -249,9 +249,9 @@ status = "disabled"; }; - fimc_3: fimc@11830000 { + fimc_3: fimc@30000 { compatible = "samsung,exynos4210-fimc"; - reg = <0x11830000 0x1000>; + reg = <0x00030000 0x1000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; @@ -262,9 +262,9 @@ status = "disabled"; }; - csis_0: csis@11880000 { + csis_0: csis@80000 { compatible = "samsung,exynos4210-csis"; - reg = <0x11880000 0x4000>; + reg = <0x00080000 0x4000>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; @@ -278,9 +278,9 @@ #size-cells = <0>; }; - csis_1: csis@11890000 { + csis_1: csis@90000 { compatible = "samsung,exynos4210-csis"; - reg = <0x11890000 0x4000>; + reg = <0x00090000 0x4000>; interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; diff --git a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts index a9ec1f6c1dea..0d8495792a70 100644 --- a/arch/arm/boot/dts/samsung/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/samsung/exynos4210-i9100.dts @@ -184,6 +184,28 @@ }; }; + i2c-gpio-2 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + + touchscreen@20 { + compatible = "cypress,aries-touchkey"; + reg = <0x20>; + + interrupt-parent = <&gpl0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&vtouchled_reg>; + vcc-supply = <&vtouch_reg>; + linux,keycodes = <KEY_MENU>, <KEY_BACK>; + }; + }; + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; @@ -380,6 +402,23 @@ vusb_a-supply = <&vusbdac_reg>; }; +&i2c_1 { + status = "okay"; + + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + + lis3dh: accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + + mount-matrix = "0", "-1", "0", + "1", "0", "0", + "0", "0", "1"; + }; +}; + &i2c_3 { status = "okay"; @@ -513,7 +552,6 @@ regulator-name = "TOUCH_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; }; vpll_reg: LDO10 { @@ -527,6 +565,14 @@ regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + /* + * Force-enable this regulator; otherwise the + * kernel hangs very early in the boot process + * for about 12 seconds, without apparent + * reason. + */ + regulator-always-on; }; vcclcd_reg: LDO13 { diff --git a/arch/arm/boot/dts/samsung/exynos4x12.dtsi b/arch/arm/boot/dts/samsung/exynos4x12.dtsi index 84c1db221c98..b4b5e769145b 100644 --- a/arch/arm/boot/dts/samsung/exynos4x12.dtsi +++ b/arch/arm/boot/dts/samsung/exynos4x12.dtsi @@ -451,14 +451,15 @@ }; &camera { + ranges = <0x0 0x11800000 0xba1000>; clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>, <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; /* fimc_[0-3] are configured outside, under phandles */ - fimc_lite_0: fimc-lite@12390000 { + fimc_lite_0: fimc-lite@b90000 { compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x12390000 0x1000>; + reg = <0x00b90000 0x1000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&isp_clock CLK_ISP_FIMC_LITE0>; @@ -467,9 +468,9 @@ status = "disabled"; }; - fimc_lite_1: fimc-lite@123a0000 { + fimc_lite_1: fimc-lite@ba0000 { compatible = "samsung,exynos4212-fimc-lite"; - reg = <0x123a0000 0x1000>; + reg = <0x00ba0000 0x1000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&isp_clock CLK_ISP_FIMC_LITE1>; @@ -478,9 +479,9 @@ status = "disabled"; }; - fimc_is: fimc-is@12000000 { + fimc_is: fimc-is@800000 { compatible = "samsung,exynos4212-fimc-is"; - reg = <0x12000000 0x260000>; + reg = <0x00800000 0x260000>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; @@ -516,18 +517,15 @@ iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; iommu-names = "isp", "drc", "fd", "mcuctl"; + samsung,pmu-syscon = <&pmu_system_controller>; #address-cells = <1>; #size-cells = <1>; ranges; status = "disabled"; - pmu@10020000 { - reg = <0x10020000 0x3000>; - }; - - i2c1_isp: i2c-isp@12140000 { + i2c1_isp: i2c-isp@940000 { compatible = "samsung,exynos4212-i2c-isp"; - reg = <0x12140000 0x100>; + reg = <0x00940000 0x100>; clocks = <&isp_clock CLK_ISP_I2C1_ISP>; clock-names = "i2c_isp"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/samsung/s5pv210.dtsi b/arch/arm/boot/dts/samsung/s5pv210.dtsi index f7de5b5f2f38..ed560c9a3aa1 100644 --- a/arch/arm/boot/dts/samsung/s5pv210.dtsi +++ b/arch/arm/boot/dts/samsung/s5pv210.dtsi @@ -549,17 +549,17 @@ camera: camera@fa600000 { compatible = "samsung,fimc"; + ranges = <0x0 0xfa600000 0xe01000>; clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; clock-names = "sclk_cam0", "sclk_cam1"; #address-cells = <1>; #size-cells = <1>; #clock-cells = <1>; clock-output-names = "cam_a_clkout", "cam_b_clkout"; - ranges; - csis0: csis@fa600000 { + csis0: csis@0 { compatible = "samsung,s5pv210-csis"; - reg = <0xfa600000 0x4000>; + reg = <0x00000000 0x4000>; interrupt-parent = <&vic2>; interrupts = <29>; clocks = <&clocks CLK_CSIS>, @@ -572,9 +572,9 @@ #size-cells = <0>; }; - fimc0: fimc@fb200000 { + fimc0: fimc@c00000 { compatible = "samsung,s5pv210-fimc"; - reg = <0xfb200000 0x1000>; + reg = <0x00c00000 0x1000>; interrupts = <5>; interrupt-parent = <&vic2>; clocks = <&clocks CLK_FIMC0>, @@ -586,9 +586,9 @@ samsung,cam-if; }; - fimc1: fimc@fb300000 { + fimc1: fimc@d00000 { compatible = "samsung,s5pv210-fimc"; - reg = <0xfb300000 0x1000>; + reg = <0x00d00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <6>; clocks = <&clocks CLK_FIMC1>, @@ -602,9 +602,9 @@ samsung,lcd-wb; }; - fimc2: fimc@fb400000 { + fimc2: fimc@e00000 { compatible = "samsung,s5pv210-fimc"; - reg = <0xfb400000 0x1000>; + reg = <0x00e00000 0x1000>; interrupt-parent = <&vic2>; interrupts = <7>; clocks = <&clocks CLK_FIMC2>, diff --git a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi index d5d88771ef97..0f87abeddc33 100644 --- a/arch/arm/boot/dts/st/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/st/ste-dbx5x0.dtsi @@ -425,7 +425,7 @@ gpio0: gpio@8012e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8012e000 0x80>; + reg = <0x8012e000 0x80>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -440,7 +440,7 @@ gpio1: gpio@8012e080 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8012e080 0x80>; + reg = <0x8012e080 0x80>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -455,7 +455,7 @@ gpio2: gpio@8000e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e000 0x80>; + reg = <0x8000e000 0x80>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -470,7 +470,7 @@ gpio3: gpio@8000e080 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e080 0x80>; + reg = <0x8000e080 0x80>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -485,7 +485,7 @@ gpio4: gpio@8000e100 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e100 0x80>; + reg = <0x8000e100 0x80>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -500,7 +500,7 @@ gpio5: gpio@8000e180 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8000e180 0x80>; + reg = <0x8000e180 0x80>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -515,7 +515,7 @@ gpio6: gpio@8011e000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8011e000 0x80>; + reg = <0x8011e000 0x80>; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -530,7 +530,7 @@ gpio7: gpio@8011e080 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0x8011e080 0x80>; + reg = <0x8011e080 0x80>; interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -545,7 +545,7 @@ gpio8: gpio@a03fe000 { compatible = "stericsson,db8500-gpio", "st,nomadik-gpio"; - reg = <0xa03fe000 0x80>; + reg = <0xa03fe000 0x80>; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi index e1de9d389a01..5eeb44c5e932 100644 --- a/arch/arm/boot/dts/st/ste-href-ab8500.dtsi +++ b/arch/arm/boot/dts/st/ste-href-ab8500.dtsi @@ -9,6 +9,54 @@ soc { prcmu@80157000 { ab8500 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + regulator { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + gpio { /* Hog a few default settings */ pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/st/ste-href-ab8505.dtsi b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi new file mode 100644 index 000000000000..268db68ccf87 --- /dev/null +++ b/arch/arm/boot/dts/st/ste-href-ab8505.dtsi @@ -0,0 +1,490 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2023 Linus Walleij <linus.walleij@linaro.org> + */ + +#include "ste-ab8505.dtsi" + +/ { + soc { + prcmu@80157000 { + ab8505 { + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + regulator { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + + gpio { + /* Hog a few default settings */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio2_default_mode>, + <&gpio4_default_mode>, + <&gpio10_default_mode>, + <&gpio11_default_mode>, + <&gpio12_default_mode>, + <&gpio13_default_mode>, + <&gpio16_default_mode>, + <&gpio24_default_mode>, + <&gpio25_default_mode>, + <&gpio36_default_mode>, + <&gpio37_default_mode>, + <&gpio38_default_mode>, + <&gpio39_default_mode>, + <&gpio42_default_mode>, + <&gpio26_default_mode>, + <&gpio35_default_mode>, + <&ycbcr_default_mode>, + <&pwm_default_mode>, + <&adi1_default_mode>, + <&usbuicc_default_mode>, + <&dmic_default_mode>, + <&extcpena_default_mode>, + <&modsclsda_default_mode>; + + /* + * Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42 + * are muxed in as GPIO, and configured as INPUT PULL DOWN + */ + gpio2 { + gpio2_default_mode: gpio2_default { + default_mux { + function = "gpio"; + groups = "gpio2_a_1"; + }; + default_cfg { + pins = "GPIO2_T9"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio4 { + gpio4_default_mode: gpio4_default { + default_mux { + function = "gpio"; + groups = "gpio4_a_1"; + }; + default_cfg { + pins = "GPIO4_W2"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio10 { + gpio10_default_mode: gpio10_default { + default_mux { + function = "gpio"; + groups = "gpio10_d_1"; + }; + default_cfg { + pins = "GPIO10_U17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio11 { + gpio11_default_mode: gpio11_default { + default_mux { + function = "gpio"; + groups = "gpio11_d_1"; + }; + default_cfg { + pins = "GPIO11_AA18"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio12 { + gpio12_default_mode: gpio12_default { + default_mux { + function = "gpio"; + groups = "gpio12_d_1"; + }; + default_cfg { + pins = "GPIO12_U16"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio13 { + gpio13_default_mode: gpio13_default { + default_mux { + function = "gpio"; + groups = "gpio13_d_1"; + }; + default_cfg { + pins = "GPIO13_W17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio16 { + gpio16_default_mode: gpio16_default { + default_mux { + function = "gpio"; + groups = "gpio16_a_1"; + }; + default_cfg { + pins = "GPIO16_F15"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio24 { + gpio24_default_mode: gpio24_default { + default_mux { + function = "gpio"; + groups = "gpio24_a_1"; + }; + default_cfg { + pins = "GPIO24_T14"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio25 { + gpio25_default_mode: gpio25_default { + default_mux { + function = "gpio"; + groups = "gpio25_a_1"; + }; + default_cfg { + pins = "GPIO25_R16"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio36 { + gpio36_default_mode: gpio36_default { + default_mux { + function = "gpio"; + groups = "gpio36_a_1"; + }; + default_cfg { + pins = "GPIO36_A17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio37 { + gpio37_default_mode: gpio37_default { + default_mux { + function = "gpio"; + groups = "gpio37_a_1"; + }; + default_cfg { + pins = "GPIO37_E15"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio38 { + gpio38_default_mode: gpio38_default { + default_mux { + function = "gpio"; + groups = "gpio38_a_1"; + }; + default_cfg { + pins = "GPIO38_C17"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio39 { + gpio39_default_mode: gpio39_default { + default_mux { + function = "gpio"; + groups = "gpio39_a_1"; + }; + default_cfg { + pins = "GPIO39_E16"; + input-enable; + bias-pull-down; + }; + }; + }; + gpio42 { + gpio42_default_mode: gpio42_default { + default_mux { + function = "gpio"; + groups = "gpio42_a_1"; + }; + default_cfg { + pins = "GPIO42_U2"; + input-enable; + bias-pull-down; + }; + }; + }; + /* + * Pins 26 and 35 muxed in as GPIO, and configured as OUTPUT LOW + */ + gpio26 { + gpio26_default_mode: gpio26_default { + default_mux { + function = "gpio"; + groups = "gpio26_d_1"; + }; + default_cfg { + pins = "GPIO26_M16"; + output-low; + }; + }; + }; + gpio35 { + gpio35_default_mode: gpio35_default { + default_mux { + function = "gpio"; + groups = "gpio35_d_1"; + }; + default_cfg { + pins = "GPIO35_W15"; + output-low; + }; + }; + }; + /* + * This sets up the YCBCR connector pins, i.e. analog video out. + * Set as input with no bias. + */ + ycbcr { + ycbcr_default_mode: ycbcr_default { + default_mux { + function = "ycbcr"; + groups = "ycbcr0123_d_1"; + }; + default_cfg { + pins = "GPIO6_Y18", + "GPIO7_AA20", + "GPIO8_W18", + "GPIO9_AA19"; + input-enable; + bias-disable; + }; + }; + }; + /* This sets up the PWM pins 14 and 15 */ + pwm { + pwm_default_mode: pwm_default { + default_mux { + function = "pwmout"; + groups = "pwmout1_d_1", "pwmout2_d_1"; + }; + default_cfg { + pins = "GPIO14_F14", + "GPIO15_B17"; + input-enable; + bias-pull-down; + }; + }; + }; + /* This sets up audio interface 1 */ + adi1 { + adi1_default_mode: adi1_default { + default_mux { + function = "adi1"; + groups = "adi1_d_1"; + }; + default_cfg { + pins = "GPIO17_P5", + "GPIO18_R5", + "GPIO19_U5", + "GPIO20_T5"; + input-enable; + bias-pull-down; + }; + }; + }; + /* This sets up the USB UICC pins */ + usbuicc { + usbuicc_default_mode: usbuicc_default { + default_mux { + function = "usbuicc"; + groups = "usbuicc_d_1"; + }; + default_cfg { + pins = "GPIO21_H19", + "GPIO22_G20", + "GPIO23_G19"; + input-enable; + bias-pull-down; + }; + }; + }; + /* This sets up the microphone pins */ + dmic { + dmic_default_mode: dmic_default { + default_mux { + function = "dmic"; + groups = "dmic12_d_1", + "dmic34_d_1", + "dmic56_d_1"; + }; + default_cfg { + pins = "GPIO27_J6", + "GPIO28_K6", + "GPIO29_G6", + "GPIO30_H6", + "GPIO31_F5", + "GPIO32_G5"; + input-enable; + bias-pull-down; + }; + }; + }; + extcpena { + extcpena_default_mode: extcpena_default { + default_mux { + function = "extcpena"; + groups = "extcpena_d_1"; + }; + default_cfg { + pins = "GPIO34_R17"; + input-enable; + bias-pull-down; + }; + }; + }; + /* Modem I2C setup (SCL and SDA pins) */ + modsclsda { + modsclsda_default_mode: modsclsda_default { + default_mux { + function = "modsclsda"; + groups = "modsclsda_d_1"; + }; + default_cfg { + pins = "GPIO40_T19", + "GPIO41_U19"; + input-enable; + bias-pull-down; + }; + }; + }; + /* + * Clock output pins associated with regulators. + */ + sysclkreq2 { + sysclkreq2_default_mode: sysclkreq2_default { + default_mux { + function = "sysclkreq"; + groups = "sysclkreq2_d_1"; + }; + default_cfg { + pins = "GPIO1_T10"; + input-enable; + bias-disable; + }; + }; + sysclkreq2_sleep_mode: sysclkreq2_sleep { + default_mux { + function = "gpio"; + groups = "gpio1_a_1"; + }; + default_cfg { + pins = "GPIO1_T10"; + input-enable; + bias-pull-down; + }; + }; + }; + sysclkreq4 { + sysclkreq4_default_mode: sysclkreq4_default { + default_mux { + function = "sysclkreq"; + groups = "sysclkreq4_d_1"; + }; + default_cfg { + pins = "GPIO3_U9"; + input-enable; + bias-disable; + }; + }; + sysclkreq4_sleep_mode: sysclkreq4_sleep { + default_mux { + function = "gpio"; + groups = "gpio3_a_1"; + }; + default_cfg { + pins = "GPIO3_U9"; + input-enable; + bias-pull-down; + }; + }; + }; + }; + /* + * Charging is not working on the HREF unless an actual battery is + * mounted, most HREFs have a DC cable in to the "battery power" + * which means this will only be cofusing. So do not enable charging + * of the HREFs. + */ + ab8500_fg { + status = "disabled"; + }; + ab8500_btemp { + status = "disabled"; + }; + ab8500_charger { + status = "disabled"; + }; + ab8500_chargalg { + status = "disabled"; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/st/ste-href.dtsi b/arch/arm/boot/dts/st/ste-href.dtsi index 13b11dbeba1c..fbf0309e108f 100644 --- a/arch/arm/boot/dts/st/ste-href.dtsi +++ b/arch/arm/boot/dts/st/ste-href.dtsi @@ -242,61 +242,6 @@ status = "okay"; }; - prcmu@80157000 { - ab8500 { - gpio { - }; - - phy { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&usb_a_1_default>; - pinctrl-1 = <&usb_a_1_sleep>; - }; - - regulator { - ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-name = "V-DISPLAY"; - }; - - ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { - regulator-name = "V-eMMC1"; - }; - - ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { - regulator-name = "V-MMC-SD"; - }; - - ab8500_ldo_intcore_reg: ab8500_ldo_intcore { - regulator-name = "V-INTCORE"; - }; - - ab8500_ldo_tvout_reg: ab8500_ldo_tvout { - regulator-name = "V-TVOUT"; - }; - - ab8500_ldo_audio_reg: ab8500_ldo_audio { - regulator-name = "V-AUD"; - }; - - ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { - regulator-name = "V-AMIC1"; - }; - - ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { - regulator-name = "V-AMIC2"; - }; - - ab8500_ldo_dmic_reg: ab8500_ldo_dmic { - regulator-name = "V-DMIC"; - }; - - ab8500_ldo_ana_reg: ab8500_ldo_ana { - regulator-name = "V-CSI/DSI"; - }; - }; - }; - }; - pinctrl { sdi0 { sdi0_default_mode: sdi0_default { diff --git a/arch/arm/boot/dts/st/ste-href520-tvk.dts b/arch/arm/boot/dts/st/ste-href520-tvk.dts index 7f661f8f13ad..5677df43c3ac 100644 --- a/arch/arm/boot/dts/st/ste-href520-tvk.dts +++ b/arch/arm/boot/dts/st/ste-href520-tvk.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "ste-db8520.dtsi" +#include "ste-href-ab8505.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-tvk1281618-r3.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts index a29e345a43d3..b142bb2d38d8 100644 --- a/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/st/ste-hrefprev60-stuib.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefprev60.dtsi" #include "ste-href-stuib.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts index 1968bd143114..5da1ff41b00e 100644 --- a/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/st/ste-hrefprev60-tvk.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefprev60.dtsi" #include "ste-href-tvk1281618-r2.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi index 9859ee91a15e..c87fd27b4434 100644 --- a/arch/arm/boot/dts/st/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/st/ste-hrefprev60.dtsi @@ -62,7 +62,7 @@ // External Micro SD slot mmc@80126000 { - cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; + cd-gpios = <&tc3589x_gpio 3 GPIO_ACTIVE_HIGH>; }; pinctrl { diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts index 7a5b6aa1db5b..c4abe24a7cd0 100644 --- a/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/st/ste-hrefv60plus-stuib.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-stuib.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts index d5af3f375161..f55e8de2b516 100644 --- a/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/st/ste-hrefv60plus-tvk.dts @@ -7,6 +7,7 @@ /dts-v1/; #include "ste-db8500.dtsi" +#include "ste-href-ab8500.dtsi" #include "ste-hrefv60plus.dtsi" #include "ste-href-tvk1281618-r2.dtsi" diff --git a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi index e66fa59c2de6..b23966c16a32 100644 --- a/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/st/ste-hrefv60plus.dtsi @@ -3,7 +3,6 @@ * Copyright 2012 ST-Ericsson AB */ -#include "ste-href-ab8500.dtsi" #include "ste-href.dtsi" / { @@ -191,7 +190,7 @@ // External Micro SD slot mmc@80126000 { - cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 + cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 }; pinctrl { diff --git a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi index 6816eef39d45..4d37c5fb553c 100644 --- a/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/st/ste-nomadik-stn8815.dtsi @@ -52,7 +52,7 @@ gpio0: gpio@101e4000 { compatible = "st,nomadik-gpio"; - reg = <0x101e4000 0x80>; + reg = <0x101e4000 0x80>; interrupt-parent = <&vica>; interrupts = <6>; interrupt-controller; @@ -66,7 +66,7 @@ gpio1: gpio@101e5000 { compatible = "st,nomadik-gpio"; - reg = <0x101e5000 0x80>; + reg = <0x101e5000 0x80>; interrupt-parent = <&vica>; interrupts = <7>; interrupt-controller; @@ -80,7 +80,7 @@ gpio2: gpio@101e6000 { compatible = "st,nomadik-gpio"; - reg = <0x101e6000 0x80>; + reg = <0x101e6000 0x80>; interrupt-parent = <&vica>; interrupts = <8>; interrupt-controller; @@ -94,7 +94,7 @@ gpio3: gpio@101e7000 { compatible = "st,nomadik-gpio"; - reg = <0x101e7000 0x80>; + reg = <0x101e7000 0x80>; ngpio = <28>; interrupt-parent = <&vica>; interrupts = <9>; diff --git a/arch/arm/boot/dts/st/ste-snowball.dts b/arch/arm/boot/dts/st/ste-snowball.dts index 27c2ec51e732..1322abfc7acf 100644 --- a/arch/arm/boot/dts/st/ste-snowball.dts +++ b/arch/arm/boot/dts/st/ste-snowball.dts @@ -266,7 +266,7 @@ pinctrl-1 = <&mc0_a_1_sleep>; /* GPIO218 MMC_CD */ - cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts index 463942ae755e..c623cc35c5ea 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts @@ -310,7 +310,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts index c1ae0e23fe45..2355ca6e9ad6 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts @@ -402,7 +402,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts index b21e40da3dfd..ad9a20ccaaeb 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-gavini.dts @@ -362,7 +362,7 @@ pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; /* "flash detect" actually card detect */ - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts index 6e586e875565..229f7c32103c 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts @@ -412,7 +412,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_2_default>; pinctrl-1 = <&mc0_a_2_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts index ba4421080b2a..cdb147dcc1db 100644 --- a/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/st/ste-ux500-samsung-kyle.dts @@ -238,7 +238,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc0_a_1_default>; pinctrl-1 = <&mc0_a_1_sleep>; - cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 + cd-gpios = <&gpio6 25 GPIO_ACTIVE_LOW>; // GPIO217 status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32f469-disco.dts b/arch/arm/boot/dts/st/stm32f469-disco.dts index cbbd521bf010..8a4f8ddd083d 100644 --- a/arch/arm/boot/dts/st/stm32f469-disco.dts +++ b/arch/arm/boot/dts/st/stm32f469-disco.dts @@ -69,16 +69,9 @@ serial0 = &usart3; }; - mmc_vcard: mmc_vcard { + vcc_3v3: vcc-3v3 { compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vdd_dsi: vdd-dsi { - compatible = "regulator-fixed"; - regulator-name = "vdd_dsi"; + regulator-name = "vcc_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -164,7 +157,7 @@ compatible = "orisetech,otm8009a"; reg = <0>; /* dsi virtual channel (0..3) */ reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; - power-supply = <&vdd_dsi>; + power-supply = <&vcc_3v3>; status = "okay"; port { @@ -219,7 +212,7 @@ &sdio { status = "okay"; - vmmc-supply = <&mmc_vcard>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain"; diff --git a/arch/arm/boot/dts/st/stm32f746.dtsi b/arch/arm/boot/dts/st/stm32f746.dtsi index 53a8e2dec9a4..65c72b6fcc83 100644 --- a/arch/arm/boot/dts/st/stm32f746.dtsi +++ b/arch/arm/boot/dts/st/stm32f746.dtsi @@ -274,6 +274,26 @@ clocks = <&rcc 0 STM32F7_APB1_CLOCK(CAN3)>; }; + spi2: spi@40003800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40003800 0x400>; + interrupts = <36>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI2)>; + status = "disabled"; + }; + + spi3: spi@40003c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40003c00 0x400>; + interrupts = <51>; + clocks = <&rcc 0 STM32F7_APB1_CLOCK(SPI3)>; + status = "disabled"; + }; + usart2: serial@40004400 { compatible = "st,stm32f7-uart"; reg = <0x40004400 0x400>; @@ -491,9 +511,30 @@ status = "disabled"; }; + spi1: spi@40013000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40013000 0x400>; + interrupts = <35>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI1)>; + status = "disabled"; + }; + + spi4: spi@40013400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40013400 0x400>; + interrupts = <84>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI4)>; + status = "disabled"; + }; + syscfg: syscon@40013800 { compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SYSCFG)>; }; exti: interrupt-controller@40013c00 { @@ -554,6 +595,26 @@ }; }; + spi5: spi@40015000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40015000 0x400>; + interrupts = <85>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI5)>; + status = "disabled"; + }; + + spi6: spi@40015400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "st,stm32f7-spi"; + reg = <0x40015400 0x400>; + interrupts = <86>; + clocks = <&rcc 0 STM32F7_APB2_CLOCK(SPI6)>; + status = "disabled"; + }; + ltdc: display-controller@40016800 { compatible = "st,stm32-ltdc"; reg = <0x40016800 0x200>; diff --git a/arch/arm/boot/dts/st/stm32mp135.dtsi b/arch/arm/boot/dts/st/stm32mp135.dtsi index abf2acd37b4e..68d32f9f5314 100644 --- a/arch/arm/boot/dts/st/stm32mp135.dtsi +++ b/arch/arm/boot/dts/st/stm32mp135.dtsi @@ -8,5 +8,16 @@ / { soc { + dcmipp: dcmipp@5a000000 { + compatible = "st,stm32mp13-dcmipp"; + reg = <0x5a000000 0x400>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc DCMIPP_R>; + clocks = <&rcc DCMIPP_K>; + status = "disabled"; + + port { + }; + }; }; }; diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index 61508917521c..fa4cbd312e5a 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -1521,6 +1521,8 @@ clocks = <&usbphyc>, <&rcc USBH>; resets = <&rcc USBH_R>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphyc_port0>; + phy-names = "usb"; status = "disabled"; }; @@ -1531,6 +1533,8 @@ resets = <&rcc USBH_R>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; companion = <&usbh_ohci>; + phys = <&usbphyc_port0>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi index dd23de85100c..3938d357e198 100644 --- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi @@ -206,8 +206,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts index afcd6285890c..ce5937270aa1 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts @@ -11,7 +11,7 @@ / { model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board"; - compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157a-dk1", "st,stm32mp157"; + compatible = "st,stm32mp157a-dk1-scmi", "st,stm32mp157"; reserved-memory { optee@de000000 { @@ -59,7 +59,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi index 5f85598cc7c6..5c1cc48e5199 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157a-stinger96.dtsi @@ -313,8 +313,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts index 39358d902000..c20a73841c1f 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts @@ -11,7 +11,7 @@ / { model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board"; - compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157c-dk2", "st,stm32mp157"; + compatible = "st,stm32mp157c-dk2-scmi", "st,stm32mp157"; reserved-memory { optee@de000000 { @@ -65,7 +65,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts index 07ea765a4553..5e2eaf57ce22 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts @@ -11,7 +11,7 @@ / { model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter"; - compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157"; + compatible = "st,stm32mp157c-ed1-scmi", "st,stm32mp157"; reserved-memory { optee@fe000000 { @@ -64,7 +64,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi index f928cfb80b87..4792004cab0c 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi @@ -500,14 +500,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts index 813086ec2489..3226fb945a8e 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts @@ -11,8 +11,7 @@ / { model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother"; - compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", - "st,stm32mp157"; + compatible = "st,stm32mp157c-ev1-scmi", "st,stm32mp157c-ed1", "st,stm32mp157"; reserved-memory { optee@fe000000 { @@ -70,7 +69,7 @@ /delete-property/ st,syscfg-holdboot; resets = <&scmi_reset RST_SCMI_MCU>, <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; - reset-names = "mcu_rst", "hold_boot"; + reset-names = "mcu_rst", "hold_boot"; }; &rcc { diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts index cd9c3ff5378b..9eb9a1bf4f2c 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1.dts @@ -362,7 +362,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts index bd67a1db9122..527c33be66cc 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts @@ -197,14 +197,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi index 4e8b2d2b30c7..bf0c32027baf 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi +++ b/arch/arm/boot/dts/st/stm32mp157c-phycore-stm32mp15-som.dtsi @@ -547,14 +547,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index f09b7c384bd9..fc3a2386dbb9 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -567,9 +567,6 @@ baseboard_eeprom: &sip_eeprom { }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; - status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi index 35b1034aa3cf..bb4f8a0b937f 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi @@ -152,7 +152,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi index 46b87a27d8b3..466d9701add0 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi @@ -305,7 +305,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi index abc595350e71..b5bc53accd6b 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-picoitx.dtsi @@ -119,12 +119,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi index 0069ad75d55e..343a4613dfca 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-avenger96.dtsi @@ -489,8 +489,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; - phy-names = "usb"; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi index 92d906bfd5d7..bc4ddcbdd5cf 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-drc-compact.dtsi @@ -312,12 +312,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi index ab7f0ba49639..6e79c4b6fe32 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcor-testbench.dtsi @@ -168,12 +168,10 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; }; &usbh_ohci { - phys = <&usbphyc_port0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi index 511113f2e399..f7634c51efb2 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi @@ -680,7 +680,6 @@ }; &usbh_ehci { - phys = <&usbphyc_port0>; status = "okay"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi index bff73a0ed10b..5c88a90903b8 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2e-netcp.dtsi @@ -36,9 +36,9 @@ qmss: qmss@2a40000 { qpend { qpend-0 { qrange = <658 8>; - interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 - 0 43 0xf04 0 44 0xf04 0 45 0xf04 - 0 46 0xf04 0 47 0xf04>; + interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; }; qpend-1 { qrange = <528 16>; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts index 7bfc80f1af26..f0ddbbcdc972 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-evm.dts @@ -9,7 +9,7 @@ #include "keystone-k2g.dtsi" / { - compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; + compatible = "ti,k2g-evm", "ti,k2g", "ti,keystone"; model = "Texas Instruments K2G General Purpose EVM"; memory@800000000 { diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi index f6306933ff42..7109ca031617 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2g-netcp.dtsi @@ -37,9 +37,9 @@ qmss: qmss@4020000 { qpend { qpend-0 { qrange = <77 8>; - interrupts =<0 308 0xf04 0 309 0xf04 0 310 0xf04 - 0 311 0xf04 0 312 0xf04 0 313 0xf04 - 0 314 0xf04 0 315 0xf04>; + interrupts = <0 308 0xf04 0 309 0xf04 0 310 0xf04 + 0 311 0xf04 0 312 0xf04 0 313 0xf04 + 0 314 0xf04 0 315 0xf04>; qalloc-by-id; }; }; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts index 206df8a8d9dd..8dfb54295027 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-evm.dts @@ -10,7 +10,7 @@ #include "keystone-k2hk.dtsi" / { - compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; + compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; reserved-memory { diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi index 8a421c65f920..c2ee775eab6a 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2hk-netcp.dtsi @@ -49,9 +49,9 @@ qmss: qmss@2a40000 { qpend { qpend-0 { qrange = <658 8>; - interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 - 0 43 0xf04 0 44 0xf04 0 45 0xf04 - 0 46 0xf04 0 47 0xf04>; + interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; }; qpend-1 { qrange = <8704 16>; diff --git a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi index 5ec6680a533d..1afebd7458c1 100644 --- a/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi +++ b/arch/arm/boot/dts/ti/keystone/keystone-k2l-netcp.dtsi @@ -36,9 +36,9 @@ qmss: qmss@2a40000 { qpend { qpend-0 { qrange = <658 8>; - interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 - 0 43 0xf04 0 44 0xf04 0 45 0xf04 - 0 46 0xf04 0 47 0xf04>; + interrupts = <0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; }; qpend-1 { qrange = <528 16>; diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile index d2b590004fed..95c68135dd0c 100644 --- a/arch/arm/boot/dts/ti/omap/Makefile +++ b/arch/arm/boot/dts/ti/omap/Makefile @@ -79,7 +79,9 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-sdp.dtb \ omap4-sdp-es23plus.dtb \ omap4-var-dvk-om44.dtb \ - omap4-var-stk-om44.dtb + omap4-var-stk-om44.dtb \ + omap4-xyboard-mz609.dtb \ + omap4-xyboard-mz617.dtb dtb-$(CONFIG_SOC_AM33XX) += \ am335x-baltos-ir2110.dtb \ am335x-baltos-ir3220.dtb \ @@ -129,6 +131,16 @@ dtb-$(CONFIG_SOC_AM43XX) += \ am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo +am571x-idk-overlays-dtbs := am571x-idk.dtb \ + am571x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2587.dtbo +am572x-idk-overlays-dtbs := am572x-idk.dtb \ + am572x-idk-touchscreen.dtbo am57xx-idk-lcd-osd101t2045.dtbo + +# Build time test only, enabled by CONFIG_OF_ALL_DTBS +dtb- += \ + am571x-idk-overlays.dtb \ + am572x-idk-overlays.dtb + dtb-$(CONFIG_SOC_DRA7XX) += \ am57xx-beagle-x15.dtb \ am57xx-beagle-x15-revb1.dtb \ diff --git a/arch/arm/boot/dts/ti/omap/am571x-idk.dts b/arch/arm/boot/dts/ti/omap/am571x-idk.dts index 48425020281a..322cf79d22e9 100644 --- a/arch/arm/boot/dts/ti/omap/am571x-idk.dts +++ b/arch/arm/boot/dts/ti/omap/am571x-idk.dts @@ -168,8 +168,8 @@ }; &extcon_usb2 { - id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; &sn65hvs882 { diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index 9a234dc1431d..c8e55642f9c6 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -197,7 +197,7 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; ti,enable-id-detection; - id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi index 1d66278c3a72..3fca84819dc0 100644 --- a/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/am572x-idk-common.dtsi @@ -169,8 +169,8 @@ }; &extcon_usb2 { - id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>; + id-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; }; &sn65hvs882 { diff --git a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi index 4cdffd6db740..ed5199d7acd8 100644 --- a/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra7-evm-common.dtsi @@ -15,12 +15,12 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; }; sound0: sound0 { diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts index a64364443031..f747ac56eb92 100644 --- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts @@ -293,11 +293,11 @@ }; &extcon_usb1 { - vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; }; &extcon_usb2 { - vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; &ipu2 { diff --git a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi index 31ab0c60ca75..f8151c61488e 100644 --- a/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/dra72-evm-common.dtsi @@ -96,12 +96,12 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; }; extcon_usb2: extcon_usb2 { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; + id-gpios = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; }; hdmi0: connector { diff --git a/arch/arm/boot/dts/ti/omap/dra76-evm.dts b/arch/arm/boot/dts/ti/omap/dra76-evm.dts index 57868ac60d29..cf9c3d35b049 100644 --- a/arch/arm/boot/dts/ti/omap/dra76-evm.dts +++ b/arch/arm/boot/dts/ti/omap/dra76-evm.dts @@ -533,11 +533,11 @@ }; &extcon_usb1 { - vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>; }; &extcon_usb2 { - vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; &m_can0 { diff --git a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts index 533ce7ce387a..fbff15a0a0fe 100644 --- a/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/ti/omap/logicpd-torpedo-37xx-devkit.dts @@ -52,7 +52,7 @@ &uart2 { /delete-property/dma-names; - bluetooth { + bluetooth-gnss { compatible = "ti,wl1283-st"; enable-gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio 162 */ max-speed = <3000000>; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi index a2bb3609c94f..a0c53d9c2625 100644 --- a/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-common.dtsi @@ -6,15 +6,6 @@ #include "motorola-cpcap-mapphone.dtsi" / { - chosen { - stdout-path = &uart3; - }; - - aliases { - display0 = &lcd0; - display1 = &hdmi0; - }; - /* * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, * then 1023 - 1024 seems to contain mbm. @@ -63,46 +54,6 @@ regulator-always-on; }; - /* FS USB Host PHY on port 1 for mdm6600 */ - fsusb1_phy: usb-phy@1 { - compatible = "motorola,mapphone-mdm6600"; - pinctrl-0 = <&usb_mdm6600_pins>; - pinctrl-1 = <&usb_mdm6600_sleep_pins>; - pinctrl-names = "default", "sleep"; - enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ - power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ - reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ - /* mode: gpio_148 gpio_149 */ - motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, - <&gpio5 21 GPIO_ACTIVE_HIGH>; - /* cmd: gpio_103 gpio_104 gpio_142 */ - motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, - <&gpio4 8 GPIO_ACTIVE_HIGH>, - <&gpio5 14 GPIO_ACTIVE_HIGH>; - /* status: gpio_52 gpio_53 gpio_55 */ - motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, - <&gpio2 21 GPIO_ACTIVE_HIGH>, - <&gpio2 23 GPIO_ACTIVE_HIGH>; - #phy-cells = <0>; - }; - - /* HS USB host TLL nop-phy on port 2 for w3glte */ - hsusb2_phy: usb-phy@2 { - compatible = "usb-nop-xceiv"; - #phy-cells = <0>; - }; - - /* LCD regulator from sw5 source */ - lcd_regulator: regulator-lcd { - compatible = "regulator-fixed"; - regulator-name = "lcd"; - regulator-min-microvolt = <5050000>; - regulator-max-microvolt = <5050000>; - gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ - enable-active-high; - vin-supply = <&sw5>; - }; - /* This is probably coming straight from the battery.. */ wl12xx_vmmc: regulator-wl12xx { compatible = "regulator-fixed"; @@ -133,41 +84,6 @@ dais = <&mcbsp2_port>, <&mcbsp3_port>; }; - - pwm8: pwm-8 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_direction_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer8>; - ti,clock-source = <0x01>; - }; - - pwm9: pwm-9 { - pinctrl-names = "default"; - pinctrl-0 = <&vibrator_enable_pin>; - - compatible = "ti,omap-dmtimer-pwm"; - #pwm-cells = <3>; - ti,timers = <&timer9>; - ti,clock-source = <0x01>; - }; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; - pwm-names = "enable", "direction"; - direction-duty-cycle-ns = <10000000>; - }; - - backlight: backlight { - compatible = "led-backlight"; - - leds = <&backlight_led>; - brightness-levels = <31 63 95 127 159 191 223 255>; - default-brightness-level = <6>; - }; }; &cpu_thermal { @@ -197,57 +113,6 @@ status = "okay"; }; -&dsi1 { - status = "okay"; - vdd-supply = <&vcsi>; - - port { - dsi1_out_ep: endpoint { - remote-endpoint = <&lcd0_in>; - lanes = <0 1 2 3 4 5>; - }; - }; - - lcd0: panel@0 { - compatible = "motorola,droid4-panel", "panel-dsi-cm"; - reg = <0>; - label = "lcd0"; - vddi-supply = <&lcd_regulator>; - reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ - - backlight = <&backlight>; - - width-mm = <50>; - height-mm = <89>; - rotation = <90>; - - panel-timing { - clock-frequency = <0>; /* Calculated by dsi */ - - hback-porch = <2>; - hactive = <540>; - hfront-porch = <0>; - hsync-len = <2>; - - vback-porch = <1>; - vactive = <960>; - vfront-porch = <0>; - vsync-len = <1>; - - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - - port { - lcd0_in: endpoint { - remote-endpoint = <&dsi1_out_ep>; - }; - }; - }; -}; - &hdmi { status = "okay"; pinctrl-0 = <&dss_hdmi_pins>; @@ -262,13 +127,6 @@ }; }; -/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ -&hdqw1w { - pinctrl-0 = <&hdq_pins>; - pinctrl-names = "default"; - ti,mode = "1w"; -}; - &i2c1 { tmp105@48 { compatible = "ti,tmp105"; @@ -322,34 +180,6 @@ }; }; -&i2c2 { - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - pinctrl-names = "default"; - pinctrl-0 = <&touchscreen_pins>; - - reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ - - /* gpio_183 with sys_nirq2 pad as wakeup */ - interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, - <&omap4_pmx_core 0x160>; - interrupt-names = "irq", "wakeup"; - wakeup-source; - }; - - isl29030@44 { - compatible = "isil,isl29030"; - reg = <0x44>; - - pinctrl-names = "default"; - pinctrl-0 = <&als_proximity_pins>; - - interrupt-parent = <&gpio6>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ - }; -}; - &omap4_pmx_core { /* hdmi_hpd.gpio_63 */ @@ -359,13 +189,6 @@ >; }; - hdq_pins: hdq-pins { - pinctrl-single,pins = < - /* 0x4a100120 hdq_sio.hdq_sio aa27 */ - OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) - >; - }; - /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */ dss_hdmi_pins: dss-hdmi-pins { pinctrl-single,pins = < @@ -427,73 +250,6 @@ >; }; - touchscreen_pins: touchscreen-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - als_proximity_pins: als-proximity-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) - >; - }; - - usb_mdm6600_pins: usb-mdm6600-pins { - pinctrl-single,pins = < - /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - - /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - - /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ - OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) - - /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - - /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - - /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - - /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - - /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - - /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - - /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - - /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - - /* Modem sleep pins to keep gpio_49 high with internal pull */ - usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ - OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) - OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) - OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) - >; - }; - usb_ulpi_pins: usb-ulpi-pins { pinctrl-single,pins = < OMAP4_IOPAD(0x196, MUX_MODE7) @@ -601,18 +357,6 @@ OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */ >; }; - - vibrator_direction_pin: vibrator-direction-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ - >; - }; - - vibrator_enable_pin: vibrator-enable-pins { - pinctrl-single,pins = < - OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ - >; - }; }; &omap4_pmx_wkup { @@ -629,17 +373,6 @@ status = "disabled"; }; -/* Configure pwm clock source for timers 8 & 9 */ -&timer8 { - assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; - assigned-clock-parents = <&sys_32k_ck>; -}; - -&timer9 { - assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; - assigned-clock-parents = <&sys_32k_ck>; -}; - /* * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149 * for wake-up events for both the USB PHY and the UART. We can use gpio_149 @@ -672,20 +405,6 @@ }; }; -&usbhsohci { - phys = <&fsusb1_phy>; - phy-names = "usb"; -}; - -&usbhsehci { - phys = <&hsusb2_phy>; -}; - -&usbhshost { - port1-mode = "ohci-phy-4pin-dpdm"; - port2-mode = "ehci-tll"; -}; - /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ &usb_otg_hs { interface-type = <1>; @@ -698,23 +417,6 @@ power = <150>; }; -&i2c4 { - ak8975: magnetometer@c { - compatible = "asahi-kasei,ak8975"; - reg = <0x0c>; - - vdd-supply = <&vhvio>; - - interrupt-parent = <&gpio6>; - interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ - - rotation-matrix = "-1", "0", "0", - "0", "1", "0", - "0", "0", "-1"; - - }; -}; - &mcbsp2 { #sound-dai-cells = <0>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi new file mode 100644 index 000000000000..f3f9ff02b35f --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-handset.dtsi @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +/ { + /* FS USB Host PHY on port 1 for mdm6600 */ + fsusb1_phy: usb-phy@1 { + compatible = "motorola,mapphone-mdm6600"; + pinctrl-0 = <&usb_mdm6600_pins>; + pinctrl-1 = <&usb_mdm6600_sleep_pins>; + pinctrl-names = "default", "sleep"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */ + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */ + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */ + /* mode: gpio_148 gpio_149 */ + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + /* cmd: gpio_103 gpio_104 gpio_142 */ + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + /* status: gpio_52 gpio_53 gpio_55 */ + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; + }; + + /* HS USB host TLL nop-phy on port 2 for w3glte */ + hsusb2_phy: usb-phy@2 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; + + pwm8: pwm-8 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_direction_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer8>; + ti,clock-source = <0x01>; + }; + + pwm9: pwm-9 { + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_enable_pin>; + + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x01>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>; + pwm-names = "enable", "direction"; + direction-duty-cycle-ns = <10000000>; + }; +}; + +/* Battery NVRAM on 1-wire handled by w1_ds250x driver */ +&hdqw1w { + pinctrl-0 = <&hdq_pins>; + pinctrl-names = "default"; + ti,mode = "1w"; +}; + +&i2c2 { + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen_pins>; + + reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */ + + /* gpio_183 with sys_nirq2 pad as wakeup */ + interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>, + <&omap4_pmx_core 0x160>; + interrupt-names = "irq", "wakeup"; + wakeup-source; + }; + + isl29030@44 { + compatible = "isil,isl29030"; + reg = <0x44>; + + pinctrl-names = "default"; + pinctrl-0 = <&als_proximity_pins>; + + interrupt-parent = <&gpio6>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */ + }; +}; + +&omap4_pmx_core { + hdq_pins: hdq-pins { + pinctrl-single,pins = < + /* 0x4a100120 hdq_sio.hdq_sio aa27 */ + OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0) + >; + }; + + /* kpd_row0.gpio_178 */ + tmp105_irq: tmp105-irq-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + touchscreen_pins: touchscreen-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + usb_mdm6600_pins: usb-mdm6600-pins { + pinctrl-single,pins = < + /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */ + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + + /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */ + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + + /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */ + OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3) + + /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + + /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */ + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + + /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */ + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + + /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */ + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + + /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */ + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + + /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */ + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + + /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */ + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + + /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */ + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + /* Modem sleep pins to keep gpio_49 high with internal pull */ + usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */ + OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3) + OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3) + OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3) + >; + }; + + als_proximity_pins: als-proximity-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3) + >; + }; + + vibrator_direction_pin: vibrator-direction-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */ + >; + }; + + vibrator_enable_pin: vibrator-enable-pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */ + >; + }; +}; + +/* Configure pwm clock source for timers 8 & 9 */ +&timer8 { + assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&timer9 { + assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>; + assigned-clock-parents = <&sys_32k_ck>; +}; + +&usbhsohci { + phys = <&fsusb1_phy>; + phy-names = "usb"; +}; + +&usbhsehci { + phys = <&hsusb2_phy>; +}; + +&usbhshost { + port1-mode = "ohci-phy-4pin-dpdm"; + port2-mode = "ehci-tll"; +}; + +&i2c4 { + ak8975: magnetometer@c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + + vdd-supply = <&vhvio>; + + interrupt-parent = <&gpio6>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */ + + rotation-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "-1"; + + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi new file mode 100644 index 000000000000..a356b3a2f24e --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-mz607-mz617.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-common.dtsi" + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <MATRIX_KEY(5, 0, KEY_VOLUMEUP)>, + <MATRIX_KEY(3, 0, KEY_VOLUMEDOWN)>; +}; + +/* + * On tablets, mmc1 regulator is vsimcard instead of vwlan2 in the stock kernel + * dtb. The regulator may not be wired even if a MMC cage is added though. + */ +&mmc1 { + vmmc-supply = <&vsimcard>; + bus-width = <4>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio_176 */ +}; diff --git a/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi new file mode 100644 index 000000000000..8b8de92b5424 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/motorola-mapphone-xt8xx.dtsi @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-handset.dtsi" + +/ { + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; + + /* LCD regulator from sw5 source */ + lcd_regulator: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd"; + regulator-min-microvolt = <5050000>; + regulator-max-microvolt = <5050000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; /* gpio96 */ + enable-active-high; + vin-supply = <&sw5>; + }; +}; + +&dsi1 { + status = "okay"; + vdd-supply = <&vcsi>; + + port { + dsi1_out_ep: endpoint { + remote-endpoint = <&lcd0_in>; + lanes = <0 1 2 3 4 5>; + }; + }; + + lcd0: panel@0 { + compatible = "motorola,droid4-panel", "panel-dsi-cm"; + reg = <0>; + label = "lcd0"; + vddi-supply = <&lcd_regulator>; + reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ + backlight = <&backlight>; + + width-mm = <50>; + height-mm = <89>; + rotation = <90>; + + panel-timing { + clock-frequency = <0>; /* Calculated by dsi */ + + hback-porch = <2>; + hactive = <540>; + hfront-porch = <0>; + hsync-len = <2>; + + vback-porch = <1>; + vactive = <960>; + vfront-porch = <0>; + vsync-len = <1>; + + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts index ccf03a743678..1d9000f84f1b 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid-bionic-xt875.dts @@ -1,11 +1,20 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { model = "Motorola Droid Bionic XT875"; compatible = "motorola,droid-bionic", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; }; &keypad { diff --git a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts index e833c21f1c01..cc3f3e1b65ea 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-droid4-xt894.dts @@ -1,9 +1,21 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; -#include "motorola-mapphone-common.dtsi" +#include "motorola-mapphone-xt8xx.dtsi" / { + model = "Motorola Droid 4 XT894"; + compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display0 = &lcd0; + display1 = &hdmi0; + }; + gpio_keys { compatible = "gpio-keys"; @@ -33,11 +45,6 @@ }; }; -/ { - model = "Motorola Droid 4 XT894"; - compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; -}; - &keypad { keypad,num-rows = <8>; keypad,num-columns = <8>; diff --git a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts index 01d783826d5f..24f7d0285f79 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-epson-embt2ws.dts @@ -51,6 +51,12 @@ regulator-name = "unknown"; }; + wl12xx_pwrseq: wl12xx-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&twl 1>; + clock-names = "ext_clock"; + }; + /* regulator for wl12xx on sdio2 */ wl12xx_vmmc: wl12xx-vmmc { pinctrl-names = "default"; @@ -74,6 +80,7 @@ twl: pmic@48 { compatible = "ti,twl6032"; reg = <0x48>; + #clock-cells = <1>; /* IRQ# = 7 */ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */ interrupt-controller; @@ -294,6 +301,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wl12xx_pins>; vmmc-supply = <&wl12xx_vmmc>; + mmc-pwrseq = <&wl12xx_pwrseq>; interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core 0x12e>; non-removable; @@ -454,10 +462,12 @@ interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH &omap4_pmx_core OMAP4_UART2_RX>; - /* - * BT + GPS in WL1283 in WG7500 requiring CLK32KAUDIO of pmic - * which does not have a driver - */ + bluetooth-gnss { + compatible = "ti,wl1283-st"; + enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; /* GPIO_25 */ + clocks = <&twl 1>; + clock-names = "ext_clock"; + }; }; &uart3 { diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts new file mode 100644 index 000000000000..762934e2d075 --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz609.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-mz607-mz617.dtsi" + +/ { + model = "Motorola Xyboard MZ609"; + compatible = "motorola,xyboard-mz609", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display1 = &hdmi0; + }; + + backlight: backlight { + compatible = "led-backlight"; + + leds = <&backlight_led>; + brightness-levels = <31 63 95 127 159 191 223 255>; + default-brightness-level = <6>; + }; +}; + +&i2c1 { + led-controller@38 { + compatible = "ti,lm3532"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x38>; + + enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + + ramp-up-us = <1024>; + ramp-down-us = <8193>; + + backlight_led: led@0 { + reg = <0>; + led-sources = <2>; + ti,led-mode = <0>; + label = ":backlight"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts new file mode 100644 index 000000000000..b9caea3b7f9d --- /dev/null +++ b/arch/arm/boot/dts/ti/omap/omap4-xyboard-mz617.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "motorola-mapphone-mz607-mz617.dtsi" + +/ { + model = "Motorola Xyboard MZ617"; + compatible = "motorola,xyboard-mz617", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + aliases { + display1 = &hdmi0; + }; +}; diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index dfdea295c4af..dba6222384c0 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -134,8 +134,10 @@ CONFIG_VIDEO_ADV7604=y CONFIG_VIDEO_ADV7604_CEC=y CONFIG_VIDEO_ML86V7667=y CONFIG_DRM=y +CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_RCAR_DU=y # CONFIG_DRM_RCAR_USE_MIPI_DSI is not set +CONFIG_DRM_SHMOBILE=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_EDP=y CONFIG_DRM_DISPLAY_CONNECTOR=y @@ -144,8 +146,7 @@ CONFIG_DRM_SII902X=y CONFIG_DRM_SIMPLE_BRIDGE=y CONFIG_DRM_I2C_ADV7511=y CONFIG_DRM_I2C_ADV7511_AUDIO=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y CONFIG_SOUND=y diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 3aca6787a167..91d505b385de 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -43,3 +43,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-transpeed-8k618-t.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts new file mode 100644 index 000000000000..21ca1977055d --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero2w.dts @@ -0,0 +1,176 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "OrangePi Zero 2W"; + compatible = "xunlong,orangepi-zero2w", "allwinner,sun50i-h618"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the USB-C socket */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* SY8089 DC/DC converter */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_vcc5v>; + regulator-always-on; + }; +}; + +&ehci1 { + status = "okay"; +}; + +/* USB 2 & 3 are on the FPC connector (or the exansion board) */ + +&mmc0 { + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + bus-width = <4>; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pc-supply = <®_dldo1>; + vcc-pf-supply = <®_dldo1>; /* internally via VCC-IO */ + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; /* internally via VCC-IO */ + vcc-pi-supply = <®_dldo1>; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&pio>; + interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */ + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + /* Supplies VCC-PLL and DRAM */ + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + /* Supplies VCC-IO, so needs to be always on. */ + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&usbotg { + /* + * PHY0 pins are connected to a USB-C socket, but a role switch + * is not implemented: both CC pins are pulled to GND. + * The VBUS pins power the device, so a fixed peripheral mode + * is the best choice. + * The board can be powered via GPIOs, in this case port0 *can* + * act as a host (with a cable/adapter ignoring CC), as VBUS is + * then provided by the GPIOs. Any user of this setup would + * need to adjust the DT accordingly: dr_mode set to "host", + * enabling OHCI0 and EHCI0. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts new file mode 100644 index 000000000000..8ea1fd41aeba --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-transpeed-8k618-t.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Arm Ltd. + */ + +/dts-v1/; + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Transpeed 8K618-T"; + compatible = "transpeed,8k618-t", "allwinner,sun50i-h618"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* discrete 3.3V regulator */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_dldo1>; + cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc2 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8-pll"; + }; + + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3-io-mmc"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1360000>; + regulator-max-microvolt = <1360000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pg-supply = <®_dldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; /* USB A type receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index 439497ab967d..072fe20cfca0 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -59,6 +59,25 @@ }; }; + firmware { + svc { + compatible = "intel,stratix10-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,stratix10-soc-fpga-mgr"; + }; + }; + }; + + fpga-region { + compatible = "fpga-region"; + #address-cells = <0x2>; + #size-cells = <0x2>; + fpga-mgr = <&fpga_mgr>; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <0 170 4>, @@ -125,7 +144,7 @@ }; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -133,13 +152,6 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; - base_fpga_region { - #address-cells = <0x2>; - #size-cells = <0x2>; - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr>; - }; - clkmgr: clock-controller@ffd10000 { compatible = "intel,stratix10-clkmgr"; reg = <0xffd10000 0x1000>; @@ -510,6 +522,7 @@ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; clocks = <&clkmgr STRATIX10_USB_CLK>; + clock-names = "otg"; iommus = <&smmu 7>; status = "disabled"; }; @@ -620,18 +633,6 @@ status = "disabled"; }; - - firmware { - svc { - compatible = "intel,stratix10-svc"; - method = "smc"; - memory-region = <&service_reserved>; - - fpga_mgr: fpga-mgr { - compatible = "intel,stratix10-soc-fpga-mgr"; - }; - }; - }; }; usbphy0: usbphy0 { diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts index 468fcc7da066..26173f0b0051 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -51,7 +51,7 @@ regulator-max-microvolt = <330000>; }; - soc { + soc@0 { eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -66,14 +66,14 @@ }; &pinctrl0 { - i2c1_pmx_func: i2c1-pmx-func { + i2c1_pmx_func: i2c1-pmx-func-pins { pinctrl-single,pins = < 0x78 0x4 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x4 /* I2C1_SCL (IO7-B) PIN31SEL */ >; }; - i2c1_pmx_func_gpio: i2c1-pmx-func-gpio { + i2c1_pmx_func_gpio: i2c1-pmx-func-gpio-pins { pinctrl-single,pins = < 0x78 0x8 /* I2C1_SDA (IO6-B) PIN30SEL) */ 0x7c 0x8 /* I2C1_SCL (IO7-B) PIN31SEL */ @@ -187,8 +187,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <1>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts index 532164a6354c..81d0e914a77c 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts @@ -51,7 +51,7 @@ regulator-max-microvolt = <330000>; }; - soc { + soc@0 { eccmgr { sdmmca-ecc@ff8c8c00 { compatible = "altr,socfpga-s10-sdmmc-ecc", @@ -102,7 +102,7 @@ &nand { status = "okay"; - flash@0 { + nand@0 { reg = <0>; #address-cells = <1>; #size-cells = <1>; @@ -176,8 +176,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <1>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts index ff413f8e3b07..0d837d3e65a5 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_swvp.dts @@ -80,8 +80,6 @@ &mmc { status = "okay"; - altr,dw-mshc-ciu-div = <0x3>; - altr,dw-mshc-sdr-timing = <0x0 0x3>; cap-sd-highspeed; cap-mmc-highspeed; broken-cd; diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi index 998f5050795c..2ad1f8eef199 100644 --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi @@ -81,6 +81,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + watchdog@2100 { + compatible = "amlogic,c3-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,c3-periphs-pinctrl"; #address-cells = <2>; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts index 0062667c4f65..8a18ce948450 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-2.dts @@ -30,8 +30,20 @@ &uart_B { bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOZ_8 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOZ_6 GPIO_ACTIVE_HIGH>; }; }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts index c2d22b00c1cd..c356bd2cc63a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j110-rev-3.dts @@ -25,3 +25,15 @@ &sd_emmc_b { broken-cd;/* cd-gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;*/ }; + +&i2c_AO { + /* EEPROM on base board */ + eeprompd: eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + pagesize = <0x20>; + label = "eeprompd"; + address-width = <0x10>; + vcc-supply = <&vddao_3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index df16eead2c80..c8905663bc75 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,7 +66,6 @@ VDDA-supply = <&vcc_3v3>; VDDP-supply = <&vcc_3v3>; VDDD-supply = <&vcc_3v3>; - status = "okay"; sound-name-prefix = "Linein"; }; @@ -75,14 +74,12 @@ compatible = "everest,es7154"; VDD-supply = <&vcc_3v3>; PVDD-supply = <&vcc_5v>; - status = "okay"; sound-name-prefix = "Lineout"; }; spdif_dit: audio-codec-2 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; @@ -91,14 +88,12 @@ compatible = "dmic-codec"; num-channels = <7>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; spdif_dir: audio-codec-4 { #sound-dai-cells = <0>; compatible = "linux,spdif-dir"; - status = "okay"; sound-name-prefix = "DIR"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index a49aa62e3f9f..7e5ac9db93f8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -432,6 +432,27 @@ }; }; + nand_all_pins: nand-all-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + bias-pull-up; + }; + }; + emmc_ds_pins: emmc_ds { mux { groups = "emmc_ds"; @@ -1913,6 +1934,8 @@ reg = <0x0 0x7800 0x0 0x100>, <0x0 0x7000 0x0 0x800>; reg-names = "nfc", "emmc"; + pinctrl-0 = <&nand_all_pins>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index 0ad0c2b7dfef..4c4550dd4711 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -45,7 +45,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index 4969a76460fa..9b55982b6a6b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi index 995ce10d5c81..08c33ec7e9f1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -369,7 +369,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi index 0a6a12808568..4b8db872bbf3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi @@ -487,7 +487,7 @@ bluetooth { compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts index 8fc2e143cb54..0da386cabe1a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts @@ -22,7 +22,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts index ce548b373296..6396f190d703 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-1 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 18f7b730289e..e59c3c92b1e7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -26,7 +26,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts index e238f1f10124..f28452b9f00f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts @@ -18,7 +18,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index 292c718ee19c..591455c50e88 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -18,7 +18,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index e8303089bff6..74df32534231 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -21,7 +21,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index e1b74b174915..376760d86766 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -17,7 +17,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 7d525bdb0e06..ad2dd4ad0a31 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -28,7 +28,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts index 50d49aec41bd..d05dde8da5c5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts @@ -37,7 +37,6 @@ spdif_dit: audio-codec-0 { #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; - status = "okay"; sound-name-prefix = "DIT"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts index c1f322c73982..983caddc409c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts +++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts @@ -15,7 +15,7 @@ #size-cells = <2>; aliases { - serial0 = &uart_B; + serial0 = &uart_b; }; memory@0 { @@ -23,9 +23,20 @@ reg = <0x0 0x0 0x0 0x40000000>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 52 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x3400000>; + no-map; + }; + }; }; -&uart_B { +&uart_b { status = "okay"; }; @@ -34,3 +45,48 @@ pinctrl-0 = <&remote_pins>; pinctrl-names = "default"; }; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +&spicc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spicc0_pins_x>; + cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi index e0cfc54ebccb..ce90b35686a2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/gpio/meson-s4-gpio.h> +#include <dt-bindings/clock/amlogic,s4-pll-clkc.h> +#include <dt-bindings/clock/amlogic,s4-peripherals-clkc.h> +#include <dt-bindings/power/meson-s4-power.h> / { cpus { @@ -92,6 +96,44 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>; + clkc_periphs: clock-controller@0 { + compatible = "amlogic,s4-peripherals-clkc"; + reg = <0x0 0x0 0x0 0x49c>; + clocks = <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_FCLK_DIV2P5>, + <&clkc_pll CLKID_FCLK_DIV3>, + <&clkc_pll CLKID_FCLK_DIV4>, + <&clkc_pll CLKID_FCLK_DIV5>, + <&clkc_pll CLKID_FCLK_DIV7>, + <&clkc_pll CLKID_HIFI_PLL>, + <&clkc_pll CLKID_GP0_PLL>, + <&clkc_pll CLKID_MPLL0>, + <&clkc_pll CLKID_MPLL1>, + <&clkc_pll CLKID_MPLL2>, + <&clkc_pll CLKID_MPLL3>, + <&clkc_pll CLKID_HDMI_PLL>, + <&xtal>; + clock-names = "fclk_div2", "fclk_div2p5", "fclk_div3", + "fclk_div4", "fclk_div5", "fclk_div7", + "hifi_pll", "gp0_pll", "mpll0", "mpll1", + "mpll2", "mpll3", "hdmi_pll", "xtal"; + #clock-cells = <1>; + }; + + clkc_pll: clock-controller@8000 { + compatible = "amlogic,s4-pll-clkc"; + reg = <0x0 0x8000 0x0 0x1e8>; + clocks = <&xtal>; + clock-names = "xtal"; + #clock-cells = <1>; + }; + + watchdog@2100 { + compatible = "amlogic,s4-wdt", "amlogic,t7-wdt"; + reg = <0x0 0x2100 0x0 0x10>; + clocks = <&xtal>; + }; + periphs_pinctrl: pinctrl@4000 { compatible = "amlogic,meson-s4-periphs-pinctrl"; #address-cells = <2>; @@ -114,6 +156,187 @@ bias-disable; }; }; + + i2c0_pins1: i2c0-pins1 { + mux { + groups = "i2c0_sda", + "i2c0_scl"; + function = "i2c0"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins1: i2c1-pins1 { + mux { + groups = "i2c1_sda_c", + "i2c1_scl_c"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins2: i2c1-pins2 { + mux { + groups = "i2c1_sda_d", + "i2c1_scl_d"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins3: i2c1-pins3 { + mux { + groups = "i2c1_sda_h", + "i2c1_scl_h"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c1_pins4: i2c1-pins4 { + mux { + groups = "i2c1_sda_x", + "i2c1_scl_x"; + function = "i2c1"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins1: i2c2-pins1 { + mux { + groups = "i2c2_sda_d", + "i2c2_scl_d"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins2: i2c2-pins2 { + mux { + groups = "i2c2_sda_h8", + "i2c2_scl_h9"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c2_pins3: i2c2-pins3 { + mux { + groups = "i2c2_sda_h0", + "i2c2_scl_h1"; + function = "i2c2"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins1: i2c3-pins1 { + mux { + groups = "i2c3_sda_x", + "i2c3_scl_x"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c3_pins2: i2c3-pins2 { + mux { + groups = "i2c3_sda_z", + "i2c3_scl_z"; + function = "i2c3"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins1: i2c4-pins1 { + mux { + groups = "i2c4_sda_c", + "i2c4_scl_c"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins2: i2c4-pins2 { + mux { + groups = "i2c4_sda_d", + "i2c4_scl_d"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + i2c4_pins3: i2c4-pins3 { + mux { + groups = "i2c4_sda_z", + "i2c4_scl_z"; + function = "i2c4"; + drive-strength-microamp = <3000>; + bias-disable; + }; + }; + + nand_pins: nand-pins { + mux { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "nand_ce0", + "nand_ale", + "nand_cle", + "nand_wen_clk", + "nand_ren_wr"; + function = "nand"; + input-enable; + }; + }; + + spicc0_pins_x: spicc0-pins_x { + mux { + groups = "spi_a_mosi_x", + "spi_a_miso_x", + "spi_a_clk_x"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_h: spicc0-pins-h { + mux { + groups = "spi_a_mosi_h", + "spi_a_miso_h", + "spi_a_clk_h"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + + spicc0_pins_z: spicc0-pins-z { + mux { + groups = "spi_a_mosi_z", + "spi_a_miso_z", + "spi_a_clk_z"; + function = "spi_a"; + drive-strength-microamp = <3000>; + }; + }; + }; gpio_intc: interrupt-controller@4080 { @@ -126,14 +349,120 @@ <10 11 12 13 14 15 16 17 18 19 20 21>; }; - uart_B: serial@7a000 { + eth_phy: mdio-multiplexer@28000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x28000 0x0 0xa4>; + + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc_periphs CLKID_ETHPHY>, + <&xtal>, + <&clkc_pll CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet-phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + + spicc0: spi@50000 { + compatible = "amlogic,meson-g12a-spicc"; + reg = <0x0 0x50000 0x0 0x44>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc_periphs CLKID_SPICC0>, + <&clkc_periphs CLKID_SPICC0_EN>; + clock-names = "core", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@66000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x66000 0x0 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_A>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@68000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x68000 0x0 0x20>; + interrupts = <GIC_SPI 161 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_B>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@6a000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6a000 0x0 0x20>; + interrupts = <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@6c000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6c000 0x0 0x20>; + interrupts = <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_D>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@6e000 { + compatible = "amlogic,meson-axg-i2c"; + reg = <0x0 0x6e000 0x0 0x20>; + interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_I2C_M_E>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand: nand-controller@8c800 { + compatible = "amlogic,meson-axg-nfc"; + reg = <0x0 0x8c800 0x0 0x100>, <0x0 0x8c000 0x0 0x4>; + reg-names = "nfc", "emmc"; + interrupts = <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_periphs CLKID_SD_EMMC_C>, + <&clkc_pll CLKID_FCLK_DIV2>; + clock-names = "core", "device"; + status = "disabled"; + }; + + uart_b: serial@7a000 { compatible = "amlogic,meson-s4-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x7a000 0x0 0x18>; interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_periphs CLKID_UART_B>, <&xtal>; clock-names = "xtal", "pclk", "baud"; + status = "disabled"; }; reset: reset-controller@2000 { @@ -154,5 +483,30 @@ reg = <0x0 0x440788 0x0 0x0c>; }; }; + + ethmac: ethernet@fdc00000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xfdc00000 0x0 0x10000>, + <0x0 0xfe024000 0x0 0x8>; + + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + power-domains = <&pwrc PWRC_S4_ETH_ID>; + clocks = <&clkc_periphs CLKID_ETH>, + <&clkc_pll CLKID_FCLK_DIV2>, + <&clkc_pll CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 095579c55f18..109932068dbe 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -32,7 +32,6 @@ compatible = "dmic-codec"; num-channels = <2>; wakeup-delay-ms = <50>; - status = "okay"; sound-name-prefix = "MIC"; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index 8b4d280b1e7e..b897f5542c0a 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -747,7 +747,7 @@ }; thermal-zones { - pmic { + pmic-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 0>; @@ -760,7 +760,7 @@ }; }; - soc { + soc-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 3>; @@ -773,28 +773,28 @@ }; }; - big_cluster_thermal_zone: big-cluster { + big_cluster_thermal_zone: big-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 21>; status = "disabled"; }; - little_cluster_thermal_zone: little-cluster { + little_cluster_thermal_zone: little-cluster-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 22>; status = "disabled"; }; - gpu0_thermal_zone: gpu0 { + gpu0_thermal_zone: gpu0-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 23>; status = "disabled"; }; - gpu1_thermal_zone: gpu1 { + gpu1_thermal_zone: gpu1-thermal { polling-delay = <1000>; polling-delay-passive = <100>; thermal-sensors = <&scpi_sensors0 24>; diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi index ec85cd2c733c..31929e2377d8 100644 --- a/arch/arm64/boot/dts/arm/juno-scmi.dtsi +++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi @@ -76,27 +76,27 @@ }; thermal-zones { - pmic { + pmic-thermal { thermal-sensors = <&scmi_sensors0 0>; }; - soc { + soc-thermal { thermal-sensors = <&scmi_sensors0 3>; }; - big-cluster { + big-cluster-thermal { thermal-sensors = <&scmi_sensors0 21>; }; - little-cluster { + little-cluster-thermal { thermal-sensors = <&scmi_sensors0 22>; }; - gpu0 { + gpu0-thermal { thermal-sensors = <&scmi_sensors0 23>; }; - gpu1 { + gpu1-thermal { thermal-sensors = <&scmi_sensors0 24>; }; }; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile index 6e4ba69268e5..d7f2191c2cdb 100644 --- a/arch/arm64/boot/dts/exynos/Makefile +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -1,8 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 +subdir-y += google + dtb-$(CONFIG_ARCH_EXYNOS) += \ exynos5433-tm2.dtb \ exynos5433-tm2e.dtb \ exynos7-espresso.dtb \ exynos7885-jackpotlte.dtb \ exynos850-e850-96.dtb \ - exynosautov9-sadk.dtb + exynosautov9-sadk.dtb \ + exynosautov920-sadk.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 91ae0462a706..7fbbec04bff0 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -361,7 +361,8 @@ ranges = <0x0 0x0 0x0 0x18000000>; chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; + compatible = "samsung,exynos5433-chipid", + "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; }; @@ -850,7 +851,8 @@ reg = <0x10580000 0x1a20>, <0x11090000 0x100>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynos5433-wakeup-eint", + "samsung,exynos7-wakeup-eint"; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -1546,7 +1548,7 @@ }; adc: adc@14d10000 { - compatible = "samsung,exynos7-adc"; + compatible = "samsung,exynos5433-adc", "samsung,exynos7-adc"; reg = <0x14d10000 0x100>; interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; clock-names = "adc"; @@ -1556,7 +1558,7 @@ }; i2s1: i2s@14d60000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x14d60000 0x100>; dmas = <&pdma0 31>, <&pdma0 30>; dma-names = "tx", "rx"; @@ -1571,7 +1573,7 @@ }; pwm: pwm@14dd0000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "samsung,exynos5433-pwm", "samsung,exynos4210-pwm"; reg = <0x14dd0000 0x100>; interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, @@ -1586,7 +1588,8 @@ }; hsi2c_0: i2c@14e40000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e40000 0x1000>; interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1599,7 +1602,8 @@ }; hsi2c_1: i2c@14e50000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e50000 0x1000>; interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1612,7 +1616,8 @@ }; hsi2c_2: i2c@14e60000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e60000 0x1000>; interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1625,7 +1630,8 @@ }; hsi2c_3: i2c@14e70000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14e70000 0x1000>; interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1638,7 +1644,8 @@ }; hsi2c_4: i2c@14ec0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ec0000 0x1000>; interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1651,7 +1658,8 @@ }; hsi2c_5: i2c@14ed0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ed0000 0x1000>; interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1664,7 +1672,8 @@ }; hsi2c_6: i2c@14ee0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ee0000 0x1000>; interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1677,7 +1686,8 @@ }; hsi2c_7: i2c@14ef0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14ef0000 0x1000>; interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1690,7 +1700,8 @@ }; hsi2c_8: i2c@14d90000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14d90000 0x1000>; interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1703,7 +1714,8 @@ }; hsi2c_9: i2c@14da0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14da0000 0x1000>; interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1716,7 +1728,8 @@ }; hsi2c_10: i2c@14de0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14de0000 0x1000>; interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1729,7 +1742,8 @@ }; hsi2c_11: i2c@14df0000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "samsung,exynos5433-hsi2c", + "samsung,exynos7-hsi2c"; reg = <0x14df0000 0x1000>; interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -1820,7 +1834,8 @@ }; mshc_0: mmc@15540000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos5433-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1833,7 +1848,8 @@ }; mshc_1: mmc@15550000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos5433-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1846,7 +1862,8 @@ }; mshc_2: mmc@15560000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos5433-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -1897,7 +1914,8 @@ }; i2s0: i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", + "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 6ed80ddf3369..9cb6bd61262e 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -128,7 +128,8 @@ ranges = <0 0 0 0x18000000>; chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; + compatible = "samsung,exynos7-chipid", + "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; }; @@ -279,7 +280,7 @@ }; serial_0: serial@13630000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x13630000 0x100>; interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric0 PCLK_UART0>, @@ -289,7 +290,7 @@ }; serial_1: serial@14c20000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x14c20000 0x100>; interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART1>, @@ -299,7 +300,7 @@ }; serial_2: serial@14c30000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x14c30000 0x100>; interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART2>, @@ -309,7 +310,7 @@ }; serial_3: serial@14c40000 { - compatible = "samsung,exynos4210-uart"; + compatible = "samsung,exynos7-uart", "samsung,exynos4210-uart"; reg = <0x14c40000 0x100>; interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART3>, @@ -539,7 +540,7 @@ }; rtc: rtc@10590000 { - compatible = "samsung,s3c6410-rtc"; + compatible = "samsung,exynos7-rtc", "samsung,s3c6410-rtc"; reg = <0x10590000 0x100>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +560,8 @@ }; gpu: gpu@14ac0000 { - compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + compatible = "samsung,exynos7-mali", + "samsung,exynos5433-mali", "arm,mali-t760"; reg = <0x14ac0000 0x5000>; interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, @@ -619,7 +621,7 @@ }; pwm: pwm@136c0000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "samsung,exynos7-pwm", "samsung,exynos4210-pwm"; reg = <0x136c0000 0x100>; interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi index d69fc2392bd0..008228fb319a 100644 --- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi @@ -172,7 +172,8 @@ ranges = <0x0 0x0 0x0 0x20000000>; chipid@10000000 { - compatible = "samsung,exynos850-chipid"; + compatible = "samsung,exynos7885-chipid", + "samsung,exynos850-chipid"; reg = <0x10000000 0x24>; }; @@ -264,7 +265,8 @@ reg = <0x11cb0000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos7-wakeup-eint"; + compatible = "samsung,exynos7885-wakeup-eint", + "samsung,exynos7-wakeup-eint"; interrupt-parent = <&gic>; interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; }; @@ -289,12 +291,14 @@ }; pmu_system_controller: system-controller@11c80000 { - compatible = "samsung,exynos7-pmu", "syscon"; + compatible = "samsung,exynos7885-pmu", + "samsung,exynos7-pmu", "syscon"; reg = <0x11c80000 0x10000>; }; mmc_0: mmc@13500000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos7885-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; reg = <0x13500000 0x2000>; interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -307,7 +311,8 @@ }; serial_0: serial@13800000 { - compatible = "samsung,exynos5433-uart"; + compatible = "samsung,exynos7885-uart", + "samsung,exynos5433-uart"; reg = <0x13800000 0x100>; interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -320,7 +325,8 @@ }; serial_1: serial@13810000 { - compatible = "samsung,exynos5433-uart"; + compatible = "samsung,exynos7885-uart", + "samsung,exynos5433-uart"; reg = <0x13810000 0x100>; interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -333,7 +339,8 @@ }; serial_2: serial@13820000 { - compatible = "samsung,exynos5433-uart"; + compatible = "samsung,exynos7885-uart", + "samsung,exynos5433-uart"; reg = <0x13820000 0x100>; interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>; pinctrl-names = "default"; @@ -346,7 +353,8 @@ }; i2c_0: i2c@13830000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13830000 0x100>; interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -359,7 +367,8 @@ }; i2c_1: i2c@13840000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13840000 0x100>; interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -372,7 +381,8 @@ }; i2c_2: i2c@13850000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13850000 0x100>; interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -385,7 +395,8 @@ }; i2c_3: i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -398,7 +409,8 @@ }; i2c_4: i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -411,7 +423,8 @@ }; i2c_5: i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -424,7 +437,8 @@ }; i2c_6: i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -437,7 +451,8 @@ }; i2c_7: i2c@11cd0000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos7885-i2c", + "samsung,s3c2440-i2c"; reg = <0x11cd0000 0x100>; interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi index 53104e65b9c6..da3f4a791e68 100644 --- a/arch/arm64/boot/dts/exynos/exynos850.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -359,7 +359,8 @@ reg = <0x11850000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos850-wakeup-eint"; + compatible = "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; }; }; @@ -368,7 +369,8 @@ reg = <0x11c30000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynos850-wakeup-eint"; + compatible = "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; }; }; @@ -396,7 +398,7 @@ }; rtc: rtc@11a30000 { - compatible = "samsung,s3c6410-rtc"; + compatible = "samsung,exynos850-rtc", "samsung,s3c6410-rtc"; reg = <0x11a30000 0x100>; interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; @@ -406,7 +408,8 @@ }; mmc_0: mmc@12100000 { - compatible = "samsung,exynos7-dw-mshc-smu"; + compatible = "samsung,exynos850-dw-mshc-smu", + "samsung,exynos7-dw-mshc-smu"; reg = <0x12100000 0x2000>; interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -419,7 +422,7 @@ }; i2c_0: i2c@13830000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13830000 0x100>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -432,7 +435,7 @@ }; i2c_1: i2c@13840000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13840000 0x100>; interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -445,7 +448,7 @@ }; i2c_2: i2c@13850000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13850000 0x100>; interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -458,7 +461,7 @@ }; i2c_3: i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -471,7 +474,7 @@ }; i2c_4: i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -485,7 +488,7 @@ /* I2C_5 (also called CAM_PMIC_I2C in TRM) */ i2c_5: i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -499,7 +502,7 @@ /* I2C_6 (also called MOTOR_I2C in TRM) */ i2c_6: i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; + compatible = "samsung,exynos850-i2c", "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -640,7 +643,8 @@ status = "disabled"; hsi2c_0: i2c@138a0000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x138a0000 0xc0>; interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -668,7 +672,8 @@ status = "disabled"; hsi2c_1: i2c@138b0000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x138b0000 0xc0>; interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -696,7 +701,8 @@ status = "disabled"; hsi2c_2: i2c@138c0000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x138c0000 0xc0>; interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -738,7 +744,8 @@ status = "disabled"; hsi2c_3: i2c@11d00000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x11d00000 0xc0>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -778,7 +785,8 @@ status = "disabled"; hsi2c_4: i2c@11d20000 { - compatible = "samsung,exynosautov9-hsi2c"; + compatible = "samsung,exynos850-hsi2c", + "samsung,exynosautov9-hsi2c"; reg = <0x11d20000 0xc0>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts index bc1815f6ada2..de2c1de51a76 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +++ b/arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "exynosautov9.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Samsung ExynosAuto v9 SADK board"; @@ -32,6 +33,31 @@ <0xa 0x00000000 0x2 0x00000000>; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_wakeup &key_volup &key_voldown>; + + key-wakeup { + label = "Wakeup"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpa0 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + key-volume-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpg2 0 GPIO_ACTIVE_LOW>; + }; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpg1 5 GPIO_ACTIVE_LOW>; + }; + }; + ufs_0_fixed_vcc_reg: regulator-0 { compatible = "regulator-fixed"; regulator-name = "ufs-vcc"; @@ -49,6 +75,31 @@ }; }; +&pinctrl_alive { + key_wakeup: key-wakeup-pins { + samsung,pins = "gpa0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + +&pinctrl_peric1 { + key_voldown: key-voldown-pins { + samsung,pins = "gpg2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; + + key_volup: key-volup-pins { + samsung,pins = "gpg1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; + }; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm_tout3>; diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi index b228cd7e351e..c871a2f49fda 100644 --- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi +++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi @@ -166,7 +166,8 @@ ranges = <0x0 0x0 0x0 0x20000000>; chipid@10000000 { - compatible = "samsung,exynos850-chipid"; + compatible = "samsung,exynosautov9-chipid", + "samsung,exynos850-chipid"; reg = <0x10000000 0x24>; }; @@ -309,7 +310,9 @@ reg = <0x10450000 0x1000>; wakeup-interrupt-controller { - compatible = "samsung,exynosautov9-wakeup-eint"; + compatible = "samsung,exynosautov9-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; }; }; @@ -349,7 +352,8 @@ }; pmu_system_controller: system-controller@10460000 { - compatible = "samsung,exynos7-pmu", "syscon"; + compatible = "samsung,exynosautov9-pmu", + "samsung,exynos7-pmu", "syscon"; reg = <0x10460000 0x10000>; reboot: syscon-reboot { diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi new file mode 100644 index 000000000000..663e8265cbf5 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov920-pinctrl.dtsi @@ -0,0 +1,1266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov920 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2023 Samsung Electronics Co., Ltd. + * + * Samsung's ExynosAutov920 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "exynos-pinctrl.h" + +&pinctrl_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpq0: gpq0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_aud { + gpb0: gpb0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb5: gpb5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb6: gpb6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi0 { + gph0: gph0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi1 { + gph8: gph8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi2 { + gph3: gph3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph4: gph4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph5: gph5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph6: gph6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi2ufs { + gph2: gph2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gph2-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_NONE>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gph2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; + + ufs_refclk_out_1: ufs-refclk-out-1-pins { + samsung,pins = "gph2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; + + ufs_rst_n_1: ufs-rst-n-1-pins { + samsung,pins = "gph2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-con-pdn = <EXYNOS_PIN_PULL_DOWN>; + }; +}; + +&pinctrl_peric0 { + gpg0: gpg0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg4: gpg4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg5: gpg5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* PWM PERIC0 */ + pwm_tout0: pwm-tout0-pins { + samsung,pins = "gpg0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout1: pwm-tout1-pins { + samsung,pins = "gpg0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout2: pwm-tout2-pins { + samsung,pins = "gpg0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + pwm_tout3: pwm-tout3-pins { + samsung,pins = "gpg0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI00 */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart0_bus_dual: uart0-bus-dual-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI01 */ + uart1_bus: uart1-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6", "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart1_bus_dual: uart1-bus-dual-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI02 */ + uart2_bus: uart2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart2_bus_dual: uart2-bus-dual-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI03 */ + uart3_bus: uart3-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6", "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart3_bus_dual: uart3-bus-dual-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI04 */ + uart4_bus: uart4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart4_bus_dual: uart4-bus-dual-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI05 */ + uart5_bus: uart5-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart5_bus_dual: uart5-bus-dual-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI06 */ + uart6_bus: uart6-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart6_bus_dual: uart6-bus-dual-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI07 */ + uart7_bus: uart7-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart7_bus_dual: uart7-bus-dual-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC0_USI08 */ + uart8_bus: uart8-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart8_bus_dual: uart8-bus-dual-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI00 */ + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI00_I2C */ + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI01 */ + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI01_I2C */ + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp0-6", "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI02 */ + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI02_I2C */ + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI03 */ + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI03_I2C */ + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp1-6", "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI04 */ + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI04_I2C */ + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp2-2", "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI05 */ + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI05_I2C */ + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI06 */ + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI06_I2C */ + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI07 */ + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI07_I2C */ + hsi2c15_bus: hsi2c15-bus-pins { + samsung,pins = "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI08 */ + hsi2c16_bus: hsi2c16-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC0 USI08_I2C */ + hsi2c17_bus: hsi2c17-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI00 */ + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp0-0", "gpp0-1", "gpp0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI01 */ + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp0-4", "gpp0-5", "gpp0-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI02 */ + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp1-0", "gpp1-1", "gpp1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp1-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI03 */ + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp1-4", "gpp1-5", "gpp1-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp1-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI04 */ + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI05 */ + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp2-4", "gpp2-5", "gpp2-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi5_cs: spi5-cs-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI06 */ + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp3-0", "gpp3-1", "gpp3-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI07 */ + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp3-4", "gpp3-5", "gpp3-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC0 USI08 */ + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I3C PERIC0 */ + i3c0_bus: i3c0-bus-pins { + samsung,pins = "gpp2-6", "gpp2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c1_bus: i3c1-bus-pins { + samsung,pins = "gpp3-2", "gpp3-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c2_bus: i3c2-bus-pins { + samsung,pins = "gpp3-6", "gpp3-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c3_bus: i3c3-bus-pins { + samsung,pins = "gpp4-2", "gpp4-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + +&pinctrl_peric1 { + gpg1: gpg1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp12: gpp12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* UART PERIC1 USI09 */ + uart9_bus: uart9-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart9_bus_dual: uart9-bus-dual-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI10 */ + uart10_bus: uart10-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6", "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart10_bus_dual: uart10-bus-dual-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI11 */ + uart11_bus: uart11-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2", "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart11_bus_dual: uart11-bus-dual-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1_USI12 */ + uart12_bus: uart12-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart12_bus_dual: uart12-bus-dual-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1_USI13 */ + uart13_bus: uart13-bus-pins { + samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6", "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart13_bus_dual: uart13-bus-dual-pins { + samsung,pins = "gpp7-4", "gpp7-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI14 */ + uart14_bus: uart14-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart14_bus_dual: uart14-bus-dual-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI15 */ + uart15_bus: uart15-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart15_bus_dual: uart15-bus-dual-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI16 */ + uart16_bus: uart16-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2", "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart16_bus_dual: uart16-bus-dual-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* UART PERIC1 USI17 */ + uart17_bus: uart17-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2", "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + uart17_bus_dual: uart17-bus-dual-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI09 */ + hsi2c18_bus: hsi2c18-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI09_I2C */ + hsi2c19_bus: hsi2c19-bus-pins { + samsung,pins = "gpp5-2", "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI10 */ + hsi2c20_bus: hsi2c20-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI10_I2C */ + hsi2c21_bus: hsi2c21-bus-pins { + samsung,pins = "gpp5-6", "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI11 */ + hsi2c22_bus: hsi2c22-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI11_I2C */ + hsi2c23_bus: hsi2c23-bus-pins { + samsung,pins = "gpp10-2", "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI12 */ + hsi2c24_bus: hsi2c24-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI12_I2C */ + hsi2c25_bus: hsi2c25-bus-pins { + samsung,pins = "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI13 */ + hsi2c26_bus: hsi2c26-bus-pins { + samsung,pins = "gpp7-4", "gpp7-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI13_I2C */ + hsi2c27_bus: hsi2c27-bus-pins { + samsung,pins = "gpp7-6", "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI14 */ + hsi2c28_bus: hsi2c28-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI14_I2C */ + hsi2c29_bus: hsi2c29-bus-pins { + samsung,pins = "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI15 */ + hsi2c30_bus: hsi2c30-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI15_I2C */ + hsi2c31_bus: hsi2c31-bus-pins { + samsung,pins = "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI16 */ + hsi2c32_bus: hsi2c32-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI16_I2C */ + hsi2c33_bus: hsi2c33-bus-pins { + samsung,pins = "gpp9-2", "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI17 */ + hsi2c34_bus: hsi2c34-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I2C PERIC1 USI17_I2C */ + hsi2c35_bus: hsi2c35-bus-pins { + samsung,pins = "gpp12-2", "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_3>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI09 */ + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp5-0", "gpp5-1", "gpp5-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp5-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI10 */ + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp5-4", "gpp5-5", "gpp5-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp5-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI11 */ + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI12 */ + spi12_bus: spi12-bus-pins { + samsung,pins = "gpp7-0", "gpp7-1", "gpp7-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI13 */ + spi13_bus: spi13-bus-pins { + samsung,pins = "gpp7-4", "gpp7-5", "gpp7-6"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI14 */ + spi14_bus: spi14-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI15 */ + spi15_bus: spi15-bus-pins { + samsung,pins = "gpp11-0", "gpp11-1", "gpp11-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi15_cs_func: spi15-cs-func-pins { + samsung,pins = "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI16 */ + spi16_bus: spi16-bus-pins { + samsung,pins = "gpp9-0", "gpp9-1", "gpp9-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi16_cs: spi16-cs-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi16_cs_func: spi16-cs-func-pins { + samsung,pins = "gpp9-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* SPI PERIC1 USI17 */ + spi17_bus: spi17-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi17_cs: spi17-cs-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + spi17_cs_func: spi17-cs-func-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + /* I3C PERIC1 */ + i3c4_bus: i3c4-bus-pins { + samsung,pins = "gpp7-2", "gpp7-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c5_bus: i3c5-bus-pins { + samsung,pins = "gpp7-6", "gpp7-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c6_bus: i3c6-bus-pins { + samsung,pins = "gpp8-2", "gpp8-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + + i3c7_bus: i3c7-bus-pins { + samsung,pins = "gpp11-2", "gpp11-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts new file mode 100644 index 000000000000..a397f068ed53 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov920 SADK board device tree source + * + * Copyright (c) 2023 Samsung Electronics Co., Ltd. + * + */ + +/dts-v1/; +#include "exynosautov920.dtsi" +#include "exynos-pinctrl.h" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Samsung ExynosAutov920 SADK board"; + compatible = "samsung,exynosautov920-sadk", "samsung,exynosautov920"; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial_0; + }; + + chosen { + stdout-path = &serial_0; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_wakeup &key_back>; + + key-wakeup { + label = "KEY_WAKEUP"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpa0 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + key-back { + label = "KEY_BACK"; + linux,code = <KEY_BACK>; + gpios = <&gpp6 3 GPIO_ACTIVE_LOW>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x70000000>, + <0x8 0x80000000 0x1 0xfba00000>, + <0xa 0x00000000 0x2 0x00000000>; + }; +}; + +&pinctrl_alive { + key_wakeup: key-wakeup-pins { + samsung,pins = "gpa0-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + }; +}; + +&pinctrl_peric1 { + key_back: key-back-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_tout0>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&usi_0 { + samsung,clkreq-on; /* needed for UART mode */ + status = "okay"; +}; + +&xtcxo { + clock-frequency = <38400000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi new file mode 100644 index 000000000000..c1c8566d74f5 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's ExynosAutov920 SoC device tree source + * + * Copyright (c) 2023 Samsung Electronics Co., Ltd. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,exynos-usi.h> + +/ { + compatible = "samsung,exynosautov920"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_hsi0; + pinctrl3 = &pinctrl_hsi1; + pinctrl4 = &pinctrl_hsi2; + pinctrl5 = &pinctrl_hsi2ufs; + pinctrl6 = &pinctrl_peric0; + pinctrl7 = &pinctrl_peric1; + }; + + arm-pmu { + compatible = "arm,cortex-a78-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + xtcxo: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + + /* + * FIXME: Keep the stub clock for serial driver, until proper clock + * driver is implemented. + */ + clock_usi: clock-usi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "usi"; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x300>; + enable-method = "psci"; + }; + + cpu4: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10000>; + enable-method = "psci"; + }; + + cpu5: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10100>; + enable-method = "psci"; + }; + + cpu6: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10200>; + enable-method = "psci"; + }; + + cpu7: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x10300>; + enable-method = "psci"; + }; + + cpu8: cpu@20000 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x20000>; + enable-method = "psci"; + }; + + cpu9: cpu@20100 { + device_type = "cpu"; + compatible = "arm,cortex-a78ae"; + reg = <0x0 0x20100>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + chipid@10000000 { + compatible = "samsung,exynosautov920-chipid", + "samsung,exynos850-chipid"; + reg = <0x10000000 0x24>; + }; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x10400000 0x10000>, + <0x10460000 0x140000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscon_peric0: syscon@10820000 { + compatible = "samsung,exynosautov920-peric0-sysreg", + "syscon"; + reg = <0x10820000 0x2000>; + }; + + pinctrl_peric0: pinctrl@10830000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x10830000 0x10000>; + interrupts = <GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>; + }; + + usi_0: usi@108800c0 { + compatible = "samsung,exynosautov920-usi", + "samsung,exynos850-usi"; + reg = <0x108800c0 0x20>; + samsung,sysreg = <&syscon_peric0 0x1000>; + samsung,mode = <USI_V2_UART>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&clock_usi>, <&clock_usi>; + clock-names = "pclk", "ipclk"; + status = "disabled"; + + serial_0: serial@10880000 { + compatible = "samsung,exynosautov920-uart", + "samsung,exynos850-uart"; + reg = <0x10880000 0xc0>; + interrupts = <GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + clocks = <&clock_usi>, <&clock_usi>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + }; + + pwm: pwm@109b0000 { + compatible = "samsung,exynosautov920-pwm", + "samsung,exynos4210-pwm"; + reg = <0x109b0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&xtcxo>; + clock-names = "timers"; + status = "disabled"; + }; + + syscon_peric1: syscon@10c20000 { + compatible = "samsung,exynosautov920-peric1-sysreg", + "syscon"; + reg = <0x10c20000 0x2000>; + }; + + pinctrl_peric1: pinctrl@10c30000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x10c30000 0x10000>; + interrupts = <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_alive: pinctrl@11850000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x11850000 0x10000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynosautov920-wakeup-eint"; + }; + }; + + pmu_system_controller: system-controller@11860000 { + compatible = "samsung,exynosautov920-pmu", + "samsung,exynos7-pmu","syscon"; + reg = <0x11860000 0x10000>; + }; + + pinctrl_hsi0: pinctrl@16040000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16040000 0x10000>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi1: pinctrl@16450000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16450000 0x10000>; + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi2: pinctrl@16c10000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16c10000 0x10000>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_hsi2ufs: pinctrl@16d20000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x16d20000 0x10000>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_aud: pinctrl@1a460000 { + compatible = "samsung,exynosautov920-pinctrl"; + reg = <0x1a460000 0x10000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "exynosautov920-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile new file mode 100644 index 000000000000..0a6d5e1fe4ee --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 + +dtb-$(CONFIG_ARCH_EXYNOS) += \ + gs101-oriole.dtb \ diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts new file mode 100644 index 000000000000..4a71f752200d --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts @@ -0,0 +1,105 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Oriole Device Tree + * + * Copyright 2021-2023 Google LLC + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "gs101-pinctrl.h" +#include "gs101.dtsi" + +/ { + model = "Oriole"; + compatible = "google,gs101-oriole", "google,gs101"; + + aliases { + serial0 = &serial_0; + }; + + chosen { + /* Bootloader expects bootargs specified otherwise it crashes */ + bootargs = ""; + stdout-path = &serial_0; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>; + + button-vol-down { + label = "KEY_VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-vol-up { + label = "KEY_VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + button-power { + label = "KEY_POWER"; + linux,code = <KEY_POWER>; + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; +}; + +&ext_24_5m { + clock-frequency = <24576000>; +}; + +&ext_200m { + clock-frequency = <200000000>; +}; + +&pinctrl_far_alive { + key_voldown: key-voldown-pins { + samsung,pins = "gpa7-3"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + key_volup: key-volup-pins { + samsung,pins = "gpa8-1"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_gpio_alive { + key_power: key-power-pins { + samsung,pins = "gpa10-1"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&serial_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "okay"; +}; + +&usi_uart { + samsung,clkreq-on; /* needed for UART mode */ + status = "okay"; +}; + +&watchdog_cl0 { + timeout-sec = <30>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi new file mode 100644 index 000000000000..e6a9776d4d62 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.dtsi @@ -0,0 +1,1249 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC pin-mux and pin-config device tree source + * + * Copyright 2019-2023 Google LLC + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> + */ + +#include "gs101-pinctrl.h" + +&pinctrl_gpio_alive { + gpa0: gpa0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa1: gpa1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa2: gpa2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa3: gpa3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa4: gpa4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa5: gpa5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa9: gpa9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa10: gpa10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + uart15_bus: uart15-bus-pins { + samsung,pins = "gpa2-3", "gpa2-4"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + uart16_bus: uart16-bus-pins { + samsung,pins = "gpa3-0", "gpa3-1", "gpa3-2", "gpa3-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + uart17_bus: uart17-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2", "gpa4-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi15_bus: spi15-bus-pins { + samsung,pins = "gpa4-0", "gpa4-1", "gpa4-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi15_cs: spi15-cs-pins { + samsung,pins = "gpa4-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_far_alive { + gpa6: gpa6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa7: gpa7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa8: gpa8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + gpa11: gpa11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; + }; +}; + +&pinctrl_gsacore { + gps0: gps0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gps1: gps1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gps2: gps2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_gsactrl { + gps3: gps3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_hsi1 { + gph0: gph0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcie0_clkreq: pcie0-clkreq-pins{ + samsung,pins = "gph0-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>; + }; + + pcie0_perst: pcie0-perst-pins { + samsung,pins = "gph0-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + }; +}; + +&pinctrl_hsi2 { + gph2: gph2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph3: gph3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph4: gph4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_cmd: sd2-cmd-pins { + samsung,pins = "gph4-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus1: sd2-bus-width1-pins { + samsung,pins = "gph4-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_bus4: sd2-bus-width4-pins { + samsung,pins = "gph4-3", "gph4-4", "gph4-5"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_7_5_MA>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins { + samsung,pins = "gph4-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + }; + + ufs_rst_n: ufs-rst-n-pins { + samsung,pins = "gph3-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + ufs_refclk_out: ufs-refclk-out-pins { + samsung,pins = "gph3-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + pcie1_clkreq: pcie1-clkreq-pins { + samsung,pins = "gph2-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_UP>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_UP>; + }; + + pcie1_perst: pcie1-perst-pins { + samsung,pins = "gph2-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-drv = <GS101_PIN_DRV_10_MA>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + }; +}; + +&pinctrl_peric0 { + gpp0: gpp0-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp1: gpp1-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp3: gpp3-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp4: gpp4-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp5: gpp5-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp6: gpp6-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp7: gpp7-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp8: gpp8-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp9: gpp9-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp10: gpp10-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp11: gpp11-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp12: gpp12-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp13: gpp13-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp14: gpp14-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp15: gpp15-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp16: gpp16-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp17: gpp17-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp18: gpp18-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp19: gpp19-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* USI_PERIC0_UART_DBG */ + uart0_bus: uart0-bus-pins { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + disp_te_pri_on: disp-te-pri-on-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + }; + + disp_te_pri_off: disp-te-pri-off-pins { + samsung,pins = "gpp0-3"; + samsung,pin-function = <GS101_PIN_FUNC_INPUT>; + }; + + disp_te_sec_on: disp-te-sec-on-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <GS101_PIN_FUNC_EINT>; + }; + + disp_te_sec_off: disp-te-sec-off-pins { + samsung,pins = "gpp0-4"; + samsung,pin-function = <GS101_PIN_FUNC_INPUT>; + }; + + sensor_mclk1_out: sensor-mclk1-out-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk1_fn: sensor-mclk1-fn-pins { + samsung,pins = "gpp3-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk2_out: sensor-mclk2-out-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk2_fn: sensor-mclk2-fn-pins { + samsung,pins = "gpp5-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk3_out: sensor-mclk3-out-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk3_fn: sensor-mclk3-fn-pins { + samsung,pins = "gpp7-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk4_out: sensor-mclk4-out-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk4_fn: sensor-mclk4-fn-pins { + samsung,pins = "gpp9-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk5_out: sensor-mclk5-out-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk5_fn: sensor-mclk5-fn-pins { + samsung,pins = "gpp11-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk6_out: sensor-mclk6-out-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk6_fn: sensor-mclk6-fn-pins { + samsung,pins = "gpp13-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk7_out: sensor-mclk7-out-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk7_fn: sensor-mclk7-fn-pins { + samsung,pins = "gpp15-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk8_out: sensor-mclk8-out-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_DOWN>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + sensor_mclk8_fn: sensor-mclk8-fn-pins { + samsung,pins = "gpp17-0"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_5_MA>; + }; + + hsi2c14_bus: hsi2c14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart14_bus_single: uart14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", + "gpp18-2", "gpp18-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi14_bus: spi14-bus-pins { + samsung,pins = "gpp18-0", "gpp18-1", "gpp18-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs: spi14-cs-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs_func: spi14-cs-func-pins { + samsung,pins = "gpp18-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c8_bus: hsi2c8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-pud-pdn = <GS101_PIN_PDN_OUT0>; + }; + + uart8_bus_single: uart8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2", + "gpp16-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi8_bus: spi8-bus-pins { + samsung,pins = "gpp16-0", "gpp16-1", "gpp16-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi8_cs: spi8-cs-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi8_cs_func: spi8-cs-func-pins { + samsung,pins = "gpp16-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c7_bus: hsi2c7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart7_bus_single: uart7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", + "gpp14-2", "gpp14-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi7_bus: spi7-bus-pins { + samsung,pins = "gpp14-0", "gpp14-1", "gpp14-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi7_cs: spi7-cs-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi7_cs_func: spi7-cs-func-pins { + samsung,pins = "gpp14-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c6_bus: hsi2c6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart6_bus_single: uart6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", + "gpp12-2", "gpp12-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi6_bus: spi6-bus-pins { + samsung,pins = "gpp12-0", "gpp12-1", "gpp12-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi6_cs: spi6-cs-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi6_cs_func: spi6-cs-func-pins { + samsung,pins = "gpp12-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c5_bus: hsi2c5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart5_bus_single: uart5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", + "gpp10-2", "gpp10-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi5_bus: spi5-bus-pins { + samsung,pins = "gpp10-0", "gpp10-1", "gpp10-2"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + spi5_cs_func: spi5-cs-func-pins { + samsung,pins = "gpp10-3"; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-con-pdn = <GS101_PIN_PDN_PREV>; + samsung,pin-pud-pdn = <GS101_PIN_PULL_NONE>; + }; + + hsi2c4_bus: hsi2c4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart4_bus_single: uart4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", + "gpp8-2", "gpp8-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi4_bus: spi4-bus-pins { + samsung,pins = "gpp8-0", "gpp8-1", "gpp8-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi4_cs: spi4-cs-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi4_cs_func: spi4-cs-func-pins { + samsung,pins = "gpp8-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c3_bus: hsi2c3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart3_bus_single: uart3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", + "gpp6-2", "gpp6-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi3_bus: spi3-bus-pins { + samsung,pins = "gpp6-0", "gpp6-1", "gpp6-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi3_cs: spi3-cs-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi3_cs_func: spi3-cs-func-pins { + samsung,pins = "gpp6-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c2_bus: hsi2c2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart2_bus_single: uart2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", + "gpp4-2", "gpp4-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi2_bus: spi2-bus-pins { + samsung,pins = "gpp4-0", "gpp4-1", "gpp4-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi2_cs: spi2-cs-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi2_cs_func: spi2-cs-func-pins { + samsung,pins = "gpp4-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c1_bus: hsi2c1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart1_bus_single: uart1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", + "gpp2-2", "gpp2-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi1_bus: spi1-bus-pins { + samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi1_cs: spi1-cs-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi1_cs_func: spi1-cs-func-pins { + samsung,pins = "gpp2-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; + +&pinctrl_peric1 { + gpp20: gpp20-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp21: gpp21-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp22: gpp22-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp23: gpp23-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp24: gpp24-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp25: gpp25-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp26: gpp26-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp27: gpp27-gpio-bank { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + hsi2c13_bus: hsi2c13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart13_bus_single: uart13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", + "gpp25-2", "gpp25-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi13_bus: spi13-bus-pins { + samsung,pins = "gpp25-0", "gpp25-1", "gpp25-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi13_cs: spi13-cs-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi13_cs_func: spi13-cs-func-pins { + samsung,pins = "gpp25-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c12_bus: hsi2c12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart12_bus_single: uart12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", + "gpp23-6", "gpp23-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi12_bus: spi12-bus-pins { + samsung,pins = "gpp23-4", "gpp23-5", "gpp23-6"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi14_cs2: spi14-cs2-pins { + samsung,pins = "gpp23-6"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi12_cs: spi12-cs-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi12_cs_func: spi12-cs-func-pins { + samsung,pins = "gpp23-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c11_bus: hsi2c11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart11_bus_single: uart11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", + "gpp23-2", "gpp23-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi11_bus: spi11-bus-pins { + samsung,pins = "gpp23-0", "gpp23-1", "gpp23-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi11_cs: spi11-cs-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi11_cs_func: spi11-cs-func-pins { + samsung,pins = "gpp23-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c10_bus: hsi2c10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart10_bus_single: uart10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", + "gpp21-2", "gpp21-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi10_bus: spi10-bus-pins { + samsung,pins = "gpp21-0", "gpp21-1", "gpp21-2"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi10_cs: spi10-cs-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi10_cs_func: spi10-cs-func-pins { + samsung,pins = "gpp21-3"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c9_bus: hsi2c9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart9_bus_single: uart9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", + "gpp20-6", "gpp20-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi9_bus: spi9-bus-pins { + samsung,pins = "gpp20-4", "gpp20-5", "gpp20-6"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi9_cs: spi9-cs-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi9_cs_func: spi9-cs-func-pins { + samsung,pins = "gpp20-7"; + samsung,pin-function = <GS101_PIN_FUNC_2>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + hsi2c0_bus: hsi2c0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + uart0_bus_single: uart0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", + "gpp20-2", "gpp20-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + }; + + spi0_bus: spi0-bus-pins { + samsung,pins = "gpp20-0", "gpp20-1", "gpp20-2"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi0_cs: spi0-cs-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <GS101_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; + + spi0_cs_func: spi0-cs-func-pins { + samsung,pins = "gpp20-3"; + samsung,pin-function = <GS101_PIN_FUNC_3>; + samsung,pin-pud = <GS101_PIN_PULL_NONE>; + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h new file mode 100644 index 000000000000..b7d276b1e25a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101-pinctrl.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Pinctrl binding constants for GS101 + * + * Copyright 2020-2023 Google LLC + */ + +#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ +#define __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ + +#define GS101_PIN_PULL_NONE 0 +#define GS101_PIN_PULL_DOWN 1 +#define GS101_PIN_PULL_UP 3 + +/* Pin function in power down mode */ +#define GS101_PIN_PDN_OUT0 0 +#define GS101_PIN_PDN_OUT1 1 +#define GS101_PIN_PDN_INPUT 2 +#define GS101_PIN_PDN_PREV 3 + +/* GS101 drive strengths */ +#define GS101_PIN_DRV_2_5_MA 0 +#define GS101_PIN_DRV_5_MA 1 +#define GS101_PIN_DRV_7_5_MA 2 +#define GS101_PIN_DRV_10_MA 3 + +#define GS101_PIN_FUNC_INPUT 0 +#define GS101_PIN_FUNC_OUTPUT 1 +#define GS101_PIN_FUNC_2 2 +#define GS101_PIN_FUNC_3 3 +#define GS101_PIN_FUNC_EINT 0xf + +#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_GOOGLE_PINCTRL_GS101_H__ */ diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi new file mode 100644 index 000000000000..9747cb3fa03a --- /dev/null +++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi @@ -0,0 +1,473 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GS101 SoC + * + * Copyright 2019-2023 Google LLC + * Copyright 2023 Linaro Ltd - <peter.griffin@linaro.org> + */ + +#include <dt-bindings/clock/google,gs101.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/samsung,exynos-usi.h> + +/ { + compatible = "google,gs101"; + #address-cells = <2>; + #size-cells = <1>; + + interrupt-parent = <&gic>; + + aliases { + pinctrl0 = &pinctrl_gpio_alive; + pinctrl1 = &pinctrl_far_alive; + pinctrl2 = &pinctrl_gsacore; + pinctrl3 = &pinctrl_gsactrl; + pinctrl4 = &pinctrl_peric0; + pinctrl5 = &pinctrl_peric1; + pinctrl6 = &pinctrl_hsi1; + pinctrl7 = &pinctrl_hsi2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu6>; + }; + core1 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0000>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0100>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0200>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0300>; + enable-method = "psci"; + cpu-idle-states = <&ANANKE_CPU_SLEEP>; + capacity-dmips-mhz = <250>; + dynamic-power-coefficient = <70>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0400>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0500>; + enable-method = "psci"; + cpu-idle-states = <&ENYO_CPU_SLEEP>; + capacity-dmips-mhz = <620>; + dynamic-power-coefficient = <284>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-x1"; + reg = <0x0600>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x1"; + reg = <0x0700>; + enable-method = "psci"; + cpu-idle-states = <&HERA_CPU_SLEEP>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <650>; + }; + + idle-states { + entry-method = "psci"; + + ANANKE_CPU_SLEEP: cpu-ananke-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <70>; + exit-latency-us = <160>; + min-residency-us = <2000>; + }; + + ENYO_CPU_SLEEP: cpu-enyo-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <150>; + exit-latency-us = <190>; + min-residency-us = <2500>; + }; + + HERA_CPU_SLEEP: cpu-hera-sleep { + idle-state-name = "c2"; + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + entry-latency-us = <235>; + exit-latency-us = <220>; + min-residency-us = <3500>; + }; + }; + }; + + /* TODO replace with CCF clock */ + dummy_clk: clock-3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12345>; + clock-output-names = "pclk"; + }; + + /* ect node is required to be present by bootloader */ + ect { + }; + + ext_24_5m: clock-1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "oscclk"; + }; + + ext_200m: clock-2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "ext-200m"; + }; + + pmu-0 { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-1 { + compatible = "arm,cortex-a76-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + pmu-2 { + compatible = "arm,cortex-x1-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster2>; + }; + + pmu-3 { + compatible = "arm,dsu-pmu"; + interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, + <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <1>; + ranges; + + gsa_reserved_protected: gsa@90200000 { + reg = <0x0 0x90200000 0x400000>; + no-map; + }; + + tpu_fw_reserved: tpu-fw@93000000 { + reg = <0x0 0x93000000 0x1000000>; + no-map; + }; + + aoc_reserve: aoc@94000000 { + reg = <0x0 0x94000000 0x03000000>; + no-map; + }; + + abl_reserved: abl@f8800000 { + reg = <0x0 0xf8800000 0x02000000>; + no-map; + }; + + dss_log_reserved: dss-log-reserved@fd3f0000 { + reg = <0x0 0xfd3f0000 0x0000e000>; + no-map; + }; + + debug_kinfo_reserved: debug-kinfo-reserved@fd3fe000 { + reg = <0x0 0xfd3fe000 0x00001000>; + no-map; + }; + + bldr_log_reserved: bldr-log-reserved@fd800000 { + reg = <0x0 0xfd800000 0x00100000>; + no-map; + }; + + bldr_log_hist_reserved: bldr-log-hist-reserved@fd900000 { + reg = <0x0 0xfd900000 0x00002000>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + cmu_misc: clock-controller@10010000 { + compatible = "google,gs101-cmu-misc"; + reg = <0x10010000 0x8000>; + #clock-cells = <1>; + clocks = <&cmu_top CLK_DOUT_CMU_MISC_BUS>, + <&cmu_top CLK_DOUT_CMU_MISC_SSS>; + clock-names = "dout_cmu_misc_bus", "dout_cmu_misc_sss"; + }; + + watchdog_cl0: watchdog@10060000 { + compatible = "google,gs101-wdt"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER0_PCLK>, + <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <0>; + status = "disabled"; + }; + + watchdog_cl1: watchdog@10070000 { + compatible = "google,gs101-wdt"; + reg = <0x10070000 0x100>; + interrupts = <GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cmu_misc CLK_GOUT_MISC_WDT_CLUSTER1_PCLK>, + <&ext_24_5m>; + clock-names = "watchdog", "watchdog_src"; + samsung,syscon-phandle = <&pmu_system_controller>; + samsung,cluster-index = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@10400000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + interrupt-controller; + reg = <0x10400000 0x10000>, /* GICD */ + <0x10440000 0x100000>;/* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5>; + }; + + ppi_cluster2: interrupt-partition-2 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + sysreg_peric0: syscon@10820000 { + compatible = "google,gs101-peric0-sysreg", "syscon"; + reg = <0x10820000 0x10000>; + }; + + pinctrl_peric0: pinctrl@10840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x10840000 0x00001000>; + interrupts = <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + usi_uart: usi@10a000c0 { + compatible = "google,gs101-usi", + "samsung,exynos850-usi"; + reg = <0x10a000c0 0x20>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&dummy_clk>, <&dummy_clk>; + clock-names = "pclk", "ipclk"; + samsung,sysreg = <&sysreg_peric0 0x1020>; + samsung,mode = <USI_V2_UART>; + status = "disabled"; + + serial_0: serial@10a00000 { + compatible = "google,gs101-uart"; + reg = <0x10a00000 0xc0>; + reg-io-width = <4>; + interrupts = <GIC_SPI 634 + IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&dummy_clk 0>, <&dummy_clk 0>; + clock-names = "uart", "clk_uart_baud0"; + samsung,uart-fifosize = <256>; + status = "disabled"; + }; + }; + + sysreg_peric1: syscon@10c20000 { + compatible = "google,gs101-peric1-sysreg", "syscon"; + reg = <0x10c20000 0x10000>; + }; + + pinctrl_peric1: pinctrl@10c40000 { + compatible = "google,gs101-pinctrl"; + reg = <0x10c40000 0x00001000>; + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + pinctrl_hsi1: pinctrl@11840000 { + compatible = "google,gs101-pinctrl"; + reg = <0x11840000 0x00001000>; + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + pinctrl_hsi2: pinctrl@14440000 { + compatible = "google,gs101-pinctrl"; + reg = <0x14440000 0x00001000>; + interrupts = <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + cmu_apm: clock-controller@17400000 { + compatible = "google,gs101-cmu-apm"; + reg = <0x17400000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + + sysreg_apm: syscon@174204e0 { + compatible = "google,gs101-apm-sysreg", "syscon"; + reg = <0x174204e0 0x1000>; + }; + + pmu_system_controller: system-controller@17460000 { + compatible = "google,gs101-pmu", "syscon"; + reg = <0x17460000 0x10000>; + }; + + pinctrl_gpio_alive: pinctrl@174d0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x174d0000 0x00001000>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_far_alive: pinctrl@174e0000 { + compatible = "google,gs101-pinctrl"; + reg = <0x174e0000 0x00001000>; + + wakeup-interrupt-controller { + compatible = "google,gs101-wakeup-eint", + "samsung,exynos850-wakeup-eint", + "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_gsactrl: pinctrl@17940000 { + compatible = "google,gs101-pinctrl"; + reg = <0x17940000 0x00001000>; + }; + + pinctrl_gsacore: pinctrl@17a80000 { + compatible = "google,gs101-pinctrl"; + reg = <0x17a80000 0x00001000>; + }; + + cmu_top: clock-controller@1e080000 { + compatible = "google,gs101-cmu-top"; + reg = <0x1e080000 0x8000>; + #clock-cells = <1>; + + clocks = <&ext_24_5m>; + clock-names = "oscclk"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = + <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>; + }; +}; + +#include "gs101-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 300049037eb0..2e027675d7bb 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -53,6 +53,32 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb +fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtbo +fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x-dtbs := fsl-lx2160a-tqmlx2160a-mblx2160a.dtb \ + fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtbo \ + fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtbo + +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-11-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-8-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-12-7-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-11-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-8-x.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-tqmlx2160a-mblx2160a-14-7-x.dtb + dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb @@ -84,9 +110,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-yavia.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33-dtbs += imx8mm-tqma8mqml-mba8mx.dtb imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtbo @@ -95,9 +123,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-dimonoff-gateway-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr3l-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mn-rve-gateway.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-tqma8mqnl-mba8mx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb @@ -115,6 +145,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb @@ -123,13 +156,17 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-wifi-yavia.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds.dtbo +imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01-dtbs += imx8mp-tqma8mpql-mba8mpxl.dtb imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtbo dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb @@ -164,6 +201,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index a863022529ac..1e3fe3897b52 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -307,46 +307,46 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>; - fsl,tmu-calibration = <0x00000000 0x00000025 - 0x00000001 0x0000002c - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004c - 0x00000007 0x00000053 - 0x00000008 0x00000059 - 0x00000009 0x0000005f - 0x0000000a 0x00000066 - 0x0000000b 0x0000006c - - 0x00010000 0x00000026 - 0x00010001 0x0000002d - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004d - 0x00010006 0x00000055 - 0x00010007 0x0000005d - 0x00010008 0x00000065 - 0x00010009 0x0000006d - - 0x00020000 0x00000026 - 0x00020001 0x00000030 - 0x00020002 0x0000003a - 0x00020003 0x00000044 - 0x00020004 0x0000004e - 0x00020005 0x00000059 - 0x00020006 0x00000063 - - 0x00030000 0x00000014 - 0x00030001 0x00000021 - 0x00030002 0x0000002e - 0x00030003 0x0000003a - 0x00030004 0x00000047 - 0x00030005 0x00000053 - 0x00030006 0x00000060>; - big-endian; + fsl,tmu-calibration = + <0x00000000 0x00000025>, + <0x00000001 0x0000002c>, + <0x00000002 0x00000032>, + <0x00000003 0x00000039>, + <0x00000004 0x0000003f>, + <0x00000005 0x00000046>, + <0x00000006 0x0000004c>, + <0x00000007 0x00000053>, + <0x00000008 0x00000059>, + <0x00000009 0x0000005f>, + <0x0000000a 0x00000066>, + <0x0000000b 0x0000006c>, + + <0x00010000 0x00000026>, + <0x00010001 0x0000002d>, + <0x00010002 0x00000035>, + <0x00010003 0x0000003d>, + <0x00010004 0x00000045>, + <0x00010005 0x0000004d>, + <0x00010006 0x00000055>, + <0x00010007 0x0000005d>, + <0x00010008 0x00000065>, + <0x00010009 0x0000006d>, + + <0x00020000 0x00000026>, + <0x00020001 0x00000030>, + <0x00020002 0x0000003a>, + <0x00020003 0x00000044>, + <0x00020004 0x0000004e>, + <0x00020005 0x00000059>, + <0x00020006 0x00000063>, + + <0x00030000 0x00000014>, + <0x00030001 0x00000021>, + <0x00030002 0x0000002e>, + <0x00030003 0x0000003a>, + <0x00030004 0x00000047>, + <0x00030005 0x00000053>, + <0x00030006 0x00000060>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index eefe3577d94e..ae534c23b970 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -1026,49 +1026,50 @@ reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>; - fsl,tmu-calibration = <0x00000000 0x00000024 - 0x00000001 0x0000002b - 0x00000002 0x00000031 - 0x00000003 0x00000038 - 0x00000004 0x0000003f - 0x00000005 0x00000045 - 0x00000006 0x0000004c - 0x00000007 0x00000053 - 0x00000008 0x00000059 - 0x00000009 0x00000060 - 0x0000000a 0x00000066 - 0x0000000b 0x0000006d - - 0x00010000 0x0000001c - 0x00010001 0x00000024 - 0x00010002 0x0000002c - 0x00010003 0x00000035 - 0x00010004 0x0000003d - 0x00010005 0x00000045 - 0x00010006 0x0000004d - 0x00010007 0x00000055 - 0x00010008 0x0000005e - 0x00010009 0x00000066 - 0x0001000a 0x0000006e - - 0x00020000 0x00000018 - 0x00020001 0x00000022 - 0x00020002 0x0000002d - 0x00020003 0x00000038 - 0x00020004 0x00000043 - 0x00020005 0x0000004d - 0x00020006 0x00000058 - 0x00020007 0x00000063 - 0x00020008 0x0000006e - - 0x00030000 0x00000010 - 0x00030001 0x0000001c - 0x00030002 0x00000029 - 0x00030003 0x00000036 - 0x00030004 0x00000042 - 0x00030005 0x0000004f - 0x00030006 0x0000005b - 0x00030007 0x00000068>; + fsl,tmu-calibration = + <0x00000000 0x00000024>, + <0x00000001 0x0000002b>, + <0x00000002 0x00000031>, + <0x00000003 0x00000038>, + <0x00000004 0x0000003f>, + <0x00000005 0x00000045>, + <0x00000006 0x0000004c>, + <0x00000007 0x00000053>, + <0x00000008 0x00000059>, + <0x00000009 0x00000060>, + <0x0000000a 0x00000066>, + <0x0000000b 0x0000006d>, + + <0x00010000 0x0000001c>, + <0x00010001 0x00000024>, + <0x00010002 0x0000002c>, + <0x00010003 0x00000035>, + <0x00010004 0x0000003d>, + <0x00010005 0x00000045>, + <0x00010006 0x0000004d>, + <0x00010007 0x00000055>, + <0x00010008 0x0000005e>, + <0x00010009 0x00000066>, + <0x0001000a 0x0000006e>, + + <0x00020000 0x00000018>, + <0x00020001 0x00000022>, + <0x00020002 0x0000002d>, + <0x00020003 0x00000038>, + <0x00020004 0x00000043>, + <0x00020005 0x0000004d>, + <0x00020006 0x00000058>, + <0x00020007 0x00000063>, + <0x00020008 0x0000006e>, + + <0x00030000 0x00000010>, + <0x00030001 0x0000001c>, + <0x00030002 0x00000029>, + <0x00030003 0x00000036>, + <0x00030004 0x00000042>, + <0x00030005 0x0000004f>, + <0x00030006 0x0000005b>, + <0x00030007 0x00000068>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 229bb4bebe42..d333b773bc45 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -447,46 +447,47 @@ reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; - fsl,tmu-calibration = <0x00000000 0x00000023 - 0x00000001 0x0000002a - 0x00000002 0x00000031 - 0x00000003 0x00000037 - 0x00000004 0x0000003e - 0x00000005 0x00000044 - 0x00000006 0x0000004b - 0x00000007 0x00000051 - 0x00000008 0x00000058 - 0x00000009 0x0000005e - 0x0000000a 0x00000065 - 0x0000000b 0x0000006b - - 0x00010000 0x00000023 - 0x00010001 0x0000002b - 0x00010002 0x00000033 - 0x00010003 0x0000003b - 0x00010004 0x00000043 - 0x00010005 0x0000004b - 0x00010006 0x00000054 - 0x00010007 0x0000005c - 0x00010008 0x00000064 - 0x00010009 0x0000006c - - 0x00020000 0x00000021 - 0x00020001 0x0000002c - 0x00020002 0x00000036 - 0x00020003 0x00000040 - 0x00020004 0x0000004b - 0x00020005 0x00000055 - 0x00020006 0x0000005f - - 0x00030000 0x00000013 - 0x00030001 0x0000001d - 0x00030002 0x00000028 - 0x00030003 0x00000032 - 0x00030004 0x0000003d - 0x00030005 0x00000047 - 0x00030006 0x00000052 - 0x00030007 0x0000005c>; + fsl,tmu-calibration = + <0x00000000 0x00000023>, + <0x00000001 0x0000002a>, + <0x00000002 0x00000031>, + <0x00000003 0x00000037>, + <0x00000004 0x0000003e>, + <0x00000005 0x00000044>, + <0x00000006 0x0000004b>, + <0x00000007 0x00000051>, + <0x00000008 0x00000058>, + <0x00000009 0x0000005e>, + <0x0000000a 0x00000065>, + <0x0000000b 0x0000006b>, + + <0x00010000 0x00000023>, + <0x00010001 0x0000002b>, + <0x00010002 0x00000033>, + <0x00010003 0x0000003b>, + <0x00010004 0x00000043>, + <0x00010005 0x0000004b>, + <0x00010006 0x00000054>, + <0x00010007 0x0000005c>, + <0x00010008 0x00000064>, + <0x00010009 0x0000006c>, + + <0x00020000 0x00000021>, + <0x00020001 0x0000002c>, + <0x00020002 0x00000036>, + <0x00020003 0x00000040>, + <0x00020004 0x0000004b>, + <0x00020005 0x00000055>, + <0x00020006 0x0000005f>, + + <0x00030000 0x00000013>, + <0x00030001 0x0000001d>, + <0x00030002 0x00000028>, + <0x00030003 0x00000032>, + <0x00030004 0x0000003d>, + <0x00030005 0x00000047>, + <0x00030006 0x00000052>, + <0x00030007 0x0000005c>; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 50f68ca5a9af..1515cec23147 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -445,46 +445,46 @@ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000023 - 0x00000001 0x00000029 - 0x00000002 0x0000002f - 0x00000003 0x00000036 - 0x00000004 0x0000003c - 0x00000005 0x00000042 - 0x00000006 0x00000049 - 0x00000007 0x0000004f - 0x00000008 0x00000055 - 0x00000009 0x0000005c - 0x0000000a 0x00000062 - 0x0000000b 0x00000068 + <0x00000000 0x00000023>, + <0x00000001 0x00000029>, + <0x00000002 0x0000002f>, + <0x00000003 0x00000036>, + <0x00000004 0x0000003c>, + <0x00000005 0x00000042>, + <0x00000006 0x00000049>, + <0x00000007 0x0000004f>, + <0x00000008 0x00000055>, + <0x00000009 0x0000005c>, + <0x0000000a 0x00000062>, + <0x0000000b 0x00000068>, /* Calibration data group 2 */ - 0x00010000 0x00000022 - 0x00010001 0x0000002a - 0x00010002 0x00000032 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000052 - 0x00010007 0x0000005a - 0x00010008 0x00000062 - 0x00010009 0x0000006a + <0x00010000 0x00000022>, + <0x00010001 0x0000002a>, + <0x00010002 0x00000032>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000052>, + <0x00010007 0x0000005a>, + <0x00010008 0x00000062>, + <0x00010009 0x0000006a>, /* Calibration data group 3 */ - 0x00020000 0x00000021 - 0x00020001 0x0000002b - 0x00020002 0x00000035 - 0x00020003 0x0000003e - 0x00020004 0x00000048 - 0x00020005 0x00000052 - 0x00020006 0x0000005c + <0x00020000 0x00000021>, + <0x00020001 0x0000002b>, + <0x00020002 0x00000035>, + <0x00020003 0x0000003e>, + <0x00020004 0x00000048>, + <0x00020005 0x00000052>, + <0x00020006 0x0000005c>, /* Calibration data group 4 */ - 0x00030000 0x00000011 - 0x00030001 0x0000001a - 0x00030002 0x00000024 - 0x00030003 0x0000002e - 0x00030004 0x00000038 - 0x00030005 0x00000042 - 0x00030006 0x0000004c - 0x00030007 0x00000056>; + <0x00030000 0x00000011>, + <0x00030001 0x0000001a>, + <0x00030002 0x00000024>, + <0x00030003 0x0000002e>, + <0x00030004 0x00000038>, + <0x00030005 0x00000042>, + <0x00030006 0x0000004c>, + <0x00030007 0x00000056>; big-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 8f6090a9aef2..8616d5e0c388 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -284,46 +284,46 @@ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000023 - 0x00000001 0x0000002a - 0x00000002 0x00000030 - 0x00000003 0x00000037 - 0x00000004 0x0000003d - 0x00000005 0x00000044 - 0x00000006 0x0000004a - 0x00000007 0x00000051 - 0x00000008 0x00000057 - 0x00000009 0x0000005e - 0x0000000a 0x00000064 - 0x0000000b 0x0000006b + <0x00000000 0x00000023>, + <0x00000001 0x0000002a>, + <0x00000002 0x00000030>, + <0x00000003 0x00000037>, + <0x00000004 0x0000003d>, + <0x00000005 0x00000044>, + <0x00000006 0x0000004a>, + <0x00000007 0x00000051>, + <0x00000008 0x00000057>, + <0x00000009 0x0000005e>, + <0x0000000a 0x00000064>, + <0x0000000b 0x0000006b>, /* Calibration data group 2 */ - 0x00010000 0x00000022 - 0x00010001 0x0000002a - 0x00010002 0x00000032 - 0x00010003 0x0000003a - 0x00010004 0x00000042 - 0x00010005 0x0000004a - 0x00010006 0x00000052 - 0x00010007 0x0000005a - 0x00010008 0x00000062 - 0x00010009 0x0000006a + <0x00010000 0x00000022>, + <0x00010001 0x0000002a>, + <0x00010002 0x00000032>, + <0x00010003 0x0000003a>, + <0x00010004 0x00000042>, + <0x00010005 0x0000004a>, + <0x00010006 0x00000052>, + <0x00010007 0x0000005a>, + <0x00010008 0x00000062>, + <0x00010009 0x0000006a>, /* Calibration data group 3 */ - 0x00020000 0x00000021 - 0x00020001 0x0000002b - 0x00020002 0x00000035 - 0x00020003 0x00000040 - 0x00020004 0x0000004a - 0x00020005 0x00000054 - 0x00020006 0x0000005e + <0x00020000 0x00000021>, + <0x00020001 0x0000002b>, + <0x00020002 0x00000035>, + <0x00020003 0x00000040>, + <0x00020004 0x0000004a>, + <0x00020005 0x00000054>, + <0x00020006 0x0000005e>, /* Calibration data group 4 */ - 0x00030000 0x00000010 - 0x00030001 0x0000001c - 0x00030002 0x00000027 - 0x00030003 0x00000032 - 0x00030004 0x0000003e - 0x00030005 0x00000049 - 0x00030006 0x00000054 - 0x00030007 0x00000060>; + <0x00030000 0x00000010>, + <0x00030001 0x0000001c>, + <0x00030002 0x00000027>, + <0x00030003 0x00000032>, + <0x00030004 0x0000003e>, + <0x00030005 0x00000049>, + <0x00030006 0x00000054>, + <0x00030007 0x00000060>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index 717288bbdb8b..0b7292835906 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -321,42 +321,43 @@ reg = <0x0 0x1f80000 0x0 0x10000>; interrupts = <0 23 0x4>; fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + fsl,tmu-calibration = + <0x00000000 0x00000026>, + <0x00000001 0x0000002d>, + <0x00000002 0x00000032>, + <0x00000003 0x00000039>, + <0x00000004 0x0000003f>, + <0x00000005 0x00000046>, + <0x00000006 0x0000004d>, + <0x00000007 0x00000054>, + <0x00000008 0x0000005a>, + <0x00000009 0x00000061>, + <0x0000000a 0x0000006a>, + <0x0000000b 0x00000071>, + + <0x00010000 0x00000025>, + <0x00010001 0x0000002c>, + <0x00010002 0x00000035>, + <0x00010003 0x0000003d>, + <0x00010004 0x00000045>, + <0x00010005 0x0000004e>, + <0x00010006 0x00000057>, + <0x00010007 0x00000061>, + <0x00010008 0x0000006b>, + <0x00010009 0x00000076>, + + <0x00020000 0x00000029>, + <0x00020001 0x00000033>, + <0x00020002 0x0000003d>, + <0x00020003 0x00000049>, + <0x00020004 0x00000056>, + <0x00020005 0x00000061>, + <0x00020006 0x0000006d>, + + <0x00030000 0x00000021>, + <0x00030001 0x0000002a>, + <0x00030002 0x0000003c>, + <0x00030003 0x0000004e>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts new file mode 100644 index 000000000000..da0f58e26b9a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a.dts @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> + +#include "fsl-lx2160a-tqmlx2160a.dtsi" + +/ { + model = "TQ Systems GmbH MBLX2160A Starterkit"; + compatible = "tq,lx2160a-tqmlx2160a-mblx2160a", "tq,lx2160a-tqmlx2160a", + "fsl,lx2160a"; + + aliases { + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart0; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-user1 { + label = "button:user1"; + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F1>; + }; + + button-user2 { + label = "button:user2"; + gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F2>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-user1 { + gpios = <&gpioex1 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <0>; + linux,default-trigger = "heartbeat"; + }; + + led-user2 { + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_HEARTBEAT; + function-enumerator = <1>; + linux,default-trigger = "heartbeat"; + }; + }; + + sfp_xfi1: sfp-xfi1 { + compatible = "sff,sfp"; + i2c-bus = <&xfi1_i2c>; + mod-def0-gpios = <&gpioex2 2 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioex2 3 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioex2 0 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioex2 1 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + sfp_xfi2: sfp-xfi2 { + compatible = "sff,sfp"; + i2c-bus = <&xfi2_i2c>; + mod-def0-gpios = <&gpioex2 6 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioex2 7 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioex2 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioex2 5 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <&dp83867_2_3>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&dp83867_2_4>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + dp83867_1_1: ethernet-phy@1 { + reg = <1>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_2: ethernet-phy@2 { + reg = <2>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_3: ethernet-phy@3 { + reg = <3>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_4: ethernet-phy@4 { + reg = <4>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_5: ethernet-phy@5 { + reg = <5>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_1_6: ethernet-phy@6 { + reg = <6>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&emdio2 { + status = "okay"; + + dp83867_2_1: ethernet-phy@1 { + reg = <1>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_2_2: ethernet-phy@2 { + reg = <2>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_2_3: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + + dp83867_2_4: ethernet-phy@4 { + reg = <4>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + no-mmc; + no-sdio; + wp-gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c0 { + gpioex3: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; +}; + +&i2c4 { + status = "okay"; + + mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <®_vcc3v3>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + gpioex0: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; + + gpioex1: gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; + + gpioex2: gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + #gpio-cells = <2>; + gpio-controller; + vcc-supply = <®_vcc3v3>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&i2c5 { + status = "okay"; + + mux@70 { + compatible = "nxp,pca9544"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <®_vcc3v3>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + xfi1_i2c: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + xfi2_i2c: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&pcs_mdio17 { + status = "okay"; +}; + +&pcs_mdio18 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>; + vcc-supply = <®_vcc3v3>; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpioex1 0 GPIO_ACTIVE_LOW>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso new file mode 100644 index 000000000000..8284a564e20d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_12_x_x.dtso @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac9 { + phy-handle = <&dp83867_2_1>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac10 { + phy-handle = <&dp83867_2_2>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&pcs_mdio9 { + status = "okay"; +}; + +&pcs_mdio10 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso new file mode 100644 index 000000000000..636b17a383ed --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_14_x_x.dtso @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac1 { + managed = "in-band-status"; +}; + +&pcs_mdio1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso new file mode 100644 index 000000000000..6d0c808cd840 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_11_x.dtso @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac12 { + phy-handle = <&dp83867_1_1>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac13 { + phy-handle = <&dp83867_1_5>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac14 { + phy-handle = <&dp83867_1_6>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac16 { + phy-handle = <&dp83867_1_4>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso new file mode 100644 index 000000000000..db88a86ff69c --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_7_x.dtso @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac12 { + phy-handle = <&dp83867_1_1>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&dpmac13 { + sfp = <&sfp_xfi1>; + managed = "in-band-status"; +}; + +&dpmac14 { + sfp = <&sfp_xfi2>; + managed = "in-band-status"; +}; + +&dpmac16 { + phy-handle = <&dp83867_1_4>; + phy-connection-type = "sgmii"; + managed = "in-band-status"; +}; + +&pcs_mdio12 { + status = "okay"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&pcs_mdio16 { + status = "okay"; +}; + +&sfp_xfi1 { + status = "okay"; +}; + +&sfp_xfi2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso new file mode 100644 index 000000000000..f6dfa76aa0e7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a-mblx2160a_x_8_x.dtso @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +/dts-v1/; +/plugin/; + +&dpmac13 { + sfp = <&sfp_xfi1>; + managed = "in-band-status"; +}; + +&dpmac14 { + sfp = <&sfp_xfi2>; + managed = "in-band-status"; +}; + +&pcs_mdio13 { + status = "okay"; +}; + +&pcs_mdio14 { + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sfp_xfi1 { + status = "okay"; +}; + +&sfp_xfi2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi new file mode 100644 index 000000000000..89a4765737b4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-tqmlx2160a.dtsi @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2020-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Gregor Herburger + */ + +#include "fsl-lx2160a.dtsi" + +/ { + reg_vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc1 { + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + mmc-hs200-1_8v; + status = "okay"; +}; + +&fspi { + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <10000000>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + flash1: flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <10000000>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + }; +}; + +&i2c0 { + scl-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + status = "okay"; + + sensor0: temperature-sensor@1f { + compatible = "nxp,se97", "jedec,jc-42.4-temp"; + reg = <0x1f>; + }; + + eeprom1: eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + read-only; + vcc-supply = <®_vcc3v3>; + }; + + rtc: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <12500>; + }; + + eeprom2: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + vcc-supply = <®_vcc3v3>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index f176ca2e244e..6640b49670ae 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -732,9 +732,9 @@ fsl,tmu-range = <0x800000e6 0x8001017d>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000035 + <0x00000000 0x00000035>, /* Calibration data group 2 */ - 0x00000001 0x00000154>; + <0x00000001 0x00000154>; little-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi index 72136c436a70..f6654fdcb147 100644 --- a/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-apalis-ixora-v1.2.dtsi @@ -68,6 +68,7 @@ gpio = <&lsio_gpio5 22 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-name = "can1_supply"; + startup-delay-us = <1000>; }; reg_can2_supply: regulator-can2-supply { @@ -77,6 +78,7 @@ gpio = <&lsio_gpio2 8 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-name = "can2_supply"; + startup-delay-us = <1000>; }; reg_usb_host_vbus: regulator-usb-host-vbus { diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi index 9d75ce467569..f057c6b21b30 100644 --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi @@ -24,7 +24,6 @@ audio_subsys: bus@59000000 { compatible = "fsl,imx8qm-edma"; reg = <0x591f0000 0x190000>; #dma-cells = <3>; - shared-interrupt; dma-channels = <24>; dma-channel-mask = <0x5c0c00>; interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 0 */ @@ -127,7 +126,6 @@ audio_subsys: bus@59000000 { compatible = "fsl,imx8qm-edma"; reg = <0x599f0000 0xc0000>; #dma-cells = <3>; - shared-interrupt; dma-channels = <11>; dma-channel-mask = <0xc0>; interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* 0 asrc 1 */ diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi index a414df645351..6d13e4fafb76 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi @@ -13,6 +13,13 @@ clock-frequency = <250000000>; clock-output-names = "conn_enet0_root_clk"; }; + + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; }; &conn_subsys { @@ -22,7 +29,7 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eth_wake_irq", "macirq"; + interrupt-names = "macirq", "eth_wake_irq"; clocks = <&eqos_lpcg IMX_LPCG_CLK_4>, <&eqos_lpcg IMX_LPCG_CLK_6>, <&eqos_lpcg IMX_LPCG_CLK_0>, @@ -53,13 +60,6 @@ rx-burst-size-dword = <0x10>; power-domains = <&pd IMX_SC_R_USB_1>; status = "disabled"; - - clk_dummy: clock-dummy { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - clock-output-names = "clk_dummy"; - }; }; usbmisc2: usbmisc@5b0e0200 { diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi index 550f513708d8..3569abb5bb9b 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi @@ -4,6 +4,6 @@ */ &ddr_pmu0 { - compatible = "fsl,imx8-ddr-pmu"; + compatible = "fsl,imx8dxl-ddr-pmu", "fsl,imx8-ddr-pmu"; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index f264102bdb27..62ed64663f49 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -3,6 +3,8 @@ * Copyright 2020 Compass Electronics Group, LLC */ +#include "imx8mm-overdrive.dtsi" + / { aliases { rtc0 = &rtc; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi index d897a8527335..44c2cba41a1f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi @@ -104,7 +104,7 @@ compatible = "nxp,pca8574"; reg = <0x3a>; gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index a882c86ec313..b53104ed8919 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -367,12 +367,6 @@ interrupts = <11 8>; status = "okay"; - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - typec1_con: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -384,6 +378,12 @@ PDO_VAR(5000, 20000, 3000)>; op-sink-microwatt = <15000000>; self-powered; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts index 0e8f0d7161ad..12fb79d20b29 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts @@ -220,7 +220,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c3@0 { + i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi new file mode 100644 index 000000000000..b31436b5e9b7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-overdrive.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&gpu_2d { + assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; +}; + +&gpu_3d { + assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, + <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; + assigned-clock-rates = <0>, <1000000000>; +}; + +&vpu_blk_ctrl { + assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>, + <&clk IMX8MM_CLK_VPU_G2>, + <&clk IMX8MM_CLK_VPU_H1>, + <&clk IMX8MM_VPU_PLL_OUT>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL3_OUT>, + <&clk IMX8MM_VPU_PLL_OUT>, + <&clk IMX8MM_SYS_PLL3_OUT>; + assigned-clock-rates = <750000000>, + <700000000>, + <750000000>, + <700000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts index 156d793a0c97..ea6e8b85169f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx"; compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi index 3a0a10e835a2..3f3f2a2c89cd 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi @@ -84,8 +84,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio1 { @@ -152,23 +159,30 @@ pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@1,0 { + pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@2,3 { + pcie@3,0 { reg = <0x1800 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - eth1: pcie@5,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; local-mac-address = [00 00 00 00 00 00]; }; @@ -312,6 +326,7 @@ MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0xd6 MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0xd6 MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0xd6 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0xd6 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi index d79fe9f62b95..06fed9376996 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi @@ -179,23 +179,30 @@ pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@1,0 { + pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - pcie@2,4 { + pcie@4,0 { reg = <0x2000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - eth1: pcie@6,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts index 06a394a41d7c..c11260c26d0b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts @@ -635,13 +635,16 @@ pcie@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; - eth1: pcie@1,0 { + eth1: ethernet@0,0 { reg = <0x0000 0 0 0 0>; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; local-mac-address = [00 00 00 00 00 00]; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi new file mode 100644 index 000000000000..4a0799d63446 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-mallow.dtsi @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin IMX8MM SoM on Mallow carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini-nano + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + /* SODIMM 52 - USER_LED_1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 54 - USER_LED_1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 56 - USER_LED_2_RED */ + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 58 - USER_LED_2_GREEN */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin SPI_1 */ +&ecspi2 { + pinctrl-0 = <&pinctrl_ecspi2>, <&pinctrl_tpm_cs>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, <&gpio3 2 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm_irq>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <18500000>; + }; +}; + +/* EEPROM on Mallow */ +&eeprom_carrier_board { + status = "okay"; +}; + +/* Verdin ETH_1 */ +&fec1 { + status = "okay"; +}; + +/* Temperature sensor on Mallow */ +&hwmon_temp { + compatible = "ti,tmp1075"; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin PCIE_1 */ +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm3 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbotg1 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbotg2 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl_leds: ledsgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x106>, /* SODIMM 52 */ + <MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x106>, /* SODIMM 54 */ + <MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6 0x106>, /* SODIMM 56 */ + <MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x106>; /* SODIMM 58 */ + }; + + pinctrl_tpm_cs: tpmcsgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x146>; /* SODIMM 64 */ + }; + + pinctrl_tpm_irq: tpmirqgrp { + fsl,pins = + <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14 0x141>; /* SODIMM 66 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts new file mode 100644 index 000000000000..1b1999f3a80e --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-nonwifi.dtsi" +#include "imx8mm-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini on Mallow"; + compatible = "toradex,verdin-imx8mm-nonwifi-mallow", + "toradex,verdin-imx8mm-nonwifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts new file mode 100644 index 000000000000..2916145f31bb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mm-verdin.dtsi" +#include "imx8mm-verdin-wifi.dtsi" +#include "imx8mm-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Mini WB on Mallow"; + compatible = "toradex,verdin-imx8mm-wifi-mallow", + "toradex,verdin-imx8mm-wifi", + "toradex,verdin-imx8mm", + "fsl,imx8mm"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 738024baaa57..8a1b42b94dce 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -636,6 +636,8 @@ clk: clock-controller@30380000 { compatible = "fsl,imx8mm-ccm"; reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; @@ -647,7 +649,6 @@ <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MM_SYS_PLL3>, - <&clk IMX8MM_VIDEO_PLL1>, <&clk IMX8MM_AUDIO_PLL1>; assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>, <&clk IMX8MM_ARM_PLL_OUT>, @@ -657,7 +658,6 @@ <400000000>, <400000000>, <750000000>, - <594000000>, <393216000>; }; @@ -1133,7 +1133,7 @@ assigned-clock-parents = <&clk IMX8MM_VIDEO_PLL1_OUT>, <&clk IMX8MM_SYS_PLL2_1000M>, <&clk IMX8MM_SYS_PLL1_800M>; - assigned-clock-rates = <594000000>, <500000000>, <200000000>; + assigned-clock-rates = <24000000>, <500000000>, <200000000>; interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_LCDIF>; status = "disabled"; @@ -1151,12 +1151,8 @@ clocks = <&clk IMX8MM_CLK_DSI_CORE>, <&clk IMX8MM_CLK_DSI_PHY_REF>; clock-names = "bus_clk", "sclk_mipi"; - assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>, - <&clk IMX8MM_CLK_DSI_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>, - <&clk IMX8MM_CLK_24M>; - assigned-clock-rates = <266000000>, <24000000>; - samsung,pll-clock-frequency = <24000000>; + assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&disp_blk_ctrl IMX8MM_DISPBLK_PD_MIPI_DSI>; status = "disabled"; @@ -1408,7 +1404,7 @@ assigned-clocks = <&clk IMX8MM_CLK_GPU3D_CORE>, <&clk IMX8MM_GPU_PLL_OUT>; assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; - assigned-clock-rates = <0>, <1000000000>; + assigned-clock-rates = <0>, <800000000>; power-domains = <&pgc_gpu>; }; @@ -1423,7 +1419,7 @@ assigned-clocks = <&clk IMX8MM_CLK_GPU2D_CORE>, <&clk IMX8MM_GPU_PLL_OUT>; assigned-clock-parents = <&clk IMX8MM_GPU_PLL_OUT>; - assigned-clock-rates = <0>, <1000000000>; + assigned-clock-rates = <0>, <800000000>; power-domains = <&pgc_gpu>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi index 90073b16536f..2a64115eebf1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi @@ -3,6 +3,8 @@ * Copyright 2020 Compass Electronics Group, LLC */ +#include "imx8mn-overdrive.dtsi" + / { aliases { rtc0 = &rtc; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi index 22a754d438f1..bbb07c650da9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi @@ -7,6 +7,7 @@ /dts-v1/; #include "imx8mn.dtsi" +#include "imx8mn-bsh-smm-s2-display.dtsi" / { chosen { diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi new file mode 100644 index 000000000000..7675583a6b67 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 BSH + */ + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 700000 0>; /* 700000 ns = 1337Hz */ + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + default-brightness-level = <50>; + status = "okay"; + }; + + reg_3v3_dvdd: regulator-3v3-O3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dvdd>; + regulator-name = "3v3-dvdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + reg_v3v3_avdd: regulator-3v3-O2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_avdd>; + regulator-name = "3v3-avdd-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + status = "okay"; +}; + +&lcdif { + assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>; + assigned-clock-rates = <594000000>; + status = "okay"; +}; + +&pgc_dispmix { + assigned-clocks = <&clk IMX8MN_CLK_DISP_AXI>, <&clk IMX8MN_CLK_DISP_APB>; + assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_1000M>, <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <500000000>, <200000000>; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + samsung,esc-clock-frequency = <20000000>; + samsung,pll-clock-frequency = <12000000>; + status = "okay"; + + panel@0 { + compatible = "sharp,ls068b3sx02", "syna,r63353"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_panel>; + reg = <0>; + + backlight = <&backlight>; + dvdd-supply = <®_3v3_dvdd>; + avdd-supply = <®_v3v3_avdd>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + }; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&gpu { + status = "okay"; +}; + +&iomuxc { + pinctrl_avdd: avddgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x16 /* VDD 3V3_VO2 */ + >; + }; + + /* This is for both PWM and voltage regulators for display */ + pinctrl_bl: blgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x16 + >; + }; + + pinctrl_dvdd: dvddgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x16 /* VDD 3V3_VO3 */ + >; + }; + + pinctrl_panel: panelgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x16 /* panel reset */ + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts new file mode 100644 index 000000000000..6f9b82958b96 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 DimOnOff + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mn-var-som-symphony.dts" + +/ { + model = "DimOnOff Gateway EVK board"; + compatible = "dimonoff,gateway-evk", "variscite,var-som-mx8mn", + "fsl,imx8mn"; + + /* + * U30 FPF2193 regulator. + * Source = BASE_PER_3V3 = SOM_3V3 (COM pin 49). + */ + reg_disp_3v3: regulator-disp-3v3 { + compatible = "regulator-fixed"; + regulator-name = "Display 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-enter { + label = "enter"; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + wakeup-source; + }; + }; + + /* Bourns PEC12R rotary encoder, 24 steps. */ + rotary: rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rotary>; + gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, /* A */ + <&gpio5 13 GPIO_ACTIVE_LOW>; /* B */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; +}; + +/* Disable Asynchronous Sample Rate Converter (audio) */ +&easrc { + status = "disabled"; +}; + +&ecspi1 { + /* Resistive touch controller */ + /delete-node/ touchscreen@0; +}; + +&gpu { + status = "disabled"; +}; + +&i2c2 { + adc@48 { + compatible = "ti,ads7924"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc>; + vref-supply = <®_disp_3v3>; + reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + label = "Pot0"; + }; + channel@1 { + reg = <1>; + label = "Pot1"; + }; + channel@2 { + reg = <2>; + label = "Pot2"; + }; + channel@3 { + reg = <3>; + label = "Pot3"; + }; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + reset-source; /* For watchdog. */ + }; + + rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reset-source; /* For watchdog. */ + interrupt-parent = <&gpio5>; + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; /* J17.6 on EVK */ + }; +}; + +&i2c3 { + touchscreen@38 { + status = "disabled"; + }; + + codec@1a { + status = "disabled"; + }; + + /* DS1337 RTC module */ + rtc@68 { + status = "disabled"; + }; +}; + +&sai5 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0xc6 + >; + }; + + pinctrl_rotary: rotarygrp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x00000156 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00000156 + >; + }; + + pinctrl_adc: adcgrp { + fsl,pins = < + MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x00000156 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x00000156 + MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x00000156 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 3f6a19839c9e..a0e13d3324ed 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -221,12 +221,6 @@ interrupts = <11 IRQ_TYPE_LEVEL_LOW>; status = "okay"; - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - typec1_con: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -238,6 +232,12 @@ PDO_VAR(5000, 20000, 3000)>; op-sink-microwatt = <15000000>; self-powered; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi new file mode 100644 index 000000000000..5d03fb893e90 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-overdrive.dtsi @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +&gpu { + assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>, + <&clk IMX8MN_CLK_GPU_SHADER>, + <&clk IMX8MN_CLK_GPU_AXI>, + <&clk IMX8MN_CLK_GPU_AHB>, + <&clk IMX8MN_GPU_PLL>; + assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>, + <&clk IMX8MN_GPU_PLL_OUT>, + <&clk IMX8MN_SYS_PLL1_800M>, + <&clk IMX8MN_SYS_PLL1_800M>; + assigned-clock-rates = <600000000>, + <600000000>, + <800000000>, + <400000000>, + <1200000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts new file mode 100644 index 000000000000..1b633bd1ebb6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mn-rve-gateway.dts @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2023 DimOnOff + */ + +/dts-v1/; + +#include <dt-bindings/usb/pd.h> +#include "imx8mn-var-som.dtsi" + +/ { + model = "RVE gateway"; + compatible = "rve,rve-gateway", "variscite,var-som-mx8mn", "fsl,imx8mn"; + + crystal_duart_24m: crystal-duart-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + key-enter { + label = "enter"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ENTER>; + }; + + key-exit { + label = "exit"; + gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_ESC>; + }; + }; + + lcd { + compatible = "hit,hd44780"; + display-height-chars = <2>; + display-width-chars = <20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + data-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>, + <&gpio1 6 GPIO_ACTIVE_HIGH>, + <&gpio1 14 GPIO_ACTIVE_HIGH>, + <&gpio4 28 GPIO_ACTIVE_HIGH>, + <&gpio5 24 GPIO_ACTIVE_HIGH>, + <&gpio5 2 GPIO_ACTIVE_HIGH>, + <&gpio1 12 GPIO_ACTIVE_HIGH>, + <&gpio5 25 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* Bourns PEC12R rotary encoder, 24 steps. */ + rotary: rotary-encoder { + compatible = "rotary-encoder"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rotary>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>, /* A */ + <&gpio3 21 GPIO_ACTIVE_LOW>; /* B */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,encoding = "gray"; + rotary-encoder,relative-axis; + }; +}; + +&ecspi1 { + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + + duart1: serial@0 { + compatible = "nxp,sc16is752"; + reg = <0>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + clocks = <&crystal_duart_24m>; + interrupt-parent = <&gpio3>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "RADIO0", "RADIO1", "RADIO2", "RADIO3", + "RADIO4", "RADIO_RESET", "TP12", "TP11"; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + }; + + /delete-node/ touchscreen@0; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + /delete-property/ dmas; + /delete-property/ dma-names; + status = "okay"; + + duart2: serial@0 { + compatible = "nxp,sc16is752"; + reg = <0>; + spi-rx-bus-width = <1>; + spi-tx-bus-width = <1>; + spi-max-frequency = <4000000>; + clocks = <&crystal_duart_24m>; + interrupt-parent = <&gpio3>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_B_USER", "LED_R_USER", "LED_G_USER", + "GPIO_EXT3", "GPIO_EXT2", "GPIO_EXT1", + "GPIO_EXT0", "TP13"; + linux,rs485-enabled-at-boot-time; + rs485-rts-active-low; + }; +}; + +/* Configure PWM pins in GPIO mode: */ +&gpio5 { + gpio-line-names = "", "", "", "PWM3", "PWM2", "PWM1"; +}; + +&gpu { + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + /* Carrier board EEPROM */ + eeprom_cb: eeprom@56 { + compatible = "atmel,24c04"; + reg = <0x56>; + pagesize = <16>; + vcc-supply = <®_3p3v>; + }; + + lm75: sensor@48 { + compatible = "st,stlm75"; + reg = <0x48>; + vs-supply = <®_3p3v>; + }; + + mcp7940: rtc@6f { + compatible = "microchip,mcp7940x"; + reg = <0x6f>; + }; +}; + +&i2c3 { + codec@1a { + status = "disabled"; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pcf8574_1: gpio@38 { + compatible = "nxp,pcf8574"; + reg = <0x38>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_B_COMM3", "LED_R_COMM3", "LED_G_COMM3", + "TP14", "TP15", "LED_G_COMM4", "LED_R_COMM4", + "LED_B_COMM4"; + }; + + pcf8574_2: gpio@39 { + compatible = "nxp,pcf8574"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "LED_B_COMM2", "LED_G_COMM2", "LED_B_COMM1", + "LED_R_COMM2", "LED_R_COMM1", "LED_G_COMM1", + "TP16", "TP17"; + }; +}; + +/* Bluetooth */ +&uart2 { + status = "disabled"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* SD interface on expansion connector. */ +&usdhc2 { + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x13 + MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x13 + MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x13 + MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x13 /* SS0 */ + MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x13 /* SC16 IRQ */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x13 + MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x13 + MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x13 + MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x13 /* SS0 */ + MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x13 /* SC16 IRQ */ + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0xc6 /* Enter */ + MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0xc6 /* Exit */ + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 + MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x00000156 /* D0 */ + MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x00000156 /* D1 */ + MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x00000156 /* D2 */ + MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x00000156 /* D3 */ + MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x00000156 /* D4 */ + MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x00000156 /* D5 */ + MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00000156 /* D6 */ + MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x00000156 /* D7 */ + MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x00000156 /* E */ + MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x00000156 /* RS */ + MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x00000156 /* R/W */ + >; + }; + + pinctrl_rotary: rotarygrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x00000156 /* A */ + MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x00000156 /* B */ + >; + }; + + /* Override Card Detect function GPIO value (GPIO1_IO10) from SOM: */ + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x41 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts index 3f1e49bfe38f..c07d59147ab5 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MN TQMa8MxNL on MBa8Mx"; compatible = "tq,imx8mn-tqma8mqnl-mba8mx", "tq,imx8mn-tqma8mqnl", "fsl,imx8mn"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts index a7a57442cb81..f38ee2266b25 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts @@ -57,6 +57,15 @@ linux,default-trigger = "heartbeat"; }; }; + + /* Peripherals supply, enabled by Q2 after SOM_3V3 rises. */ + reg_per_3v3: regulator-peripheral-3v3 { + compatible = "regulator-fixed"; + regulator-name = "per_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; ðphy { @@ -79,6 +88,7 @@ interrupts = <7 IRQ_TYPE_EDGE_FALLING>; #gpio-cells = <2>; wakeup-source; + vcc-supply = <®_per_3v3>; /* USB 3.0 OTG (usbotg1) / SATA port switch, set to USB 3.0 */ usb3-sata-sel-hog { @@ -118,9 +128,14 @@ pinctrl-0 = <&pinctrl_ptn5150>; status = "okay"; - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec1_dr_sw: endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index b8946edf317b..b364307868f2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -31,6 +31,14 @@ gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + reg_3v3_fixed: regulator-3v3-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &A53_0 { @@ -234,6 +242,7 @@ compatible = "atmel,24c04"; reg = <0x52>; pagesize = <16>; + vcc-supply = <®_3v3_fixed>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 1bb1d0c1bae4..136e75c51251 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -637,6 +637,8 @@ clk: clock-controller@30380000 { compatible = "fsl,imx8mn-ccm"; reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts index 0bea0798d2db..feae77e03835 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts @@ -94,6 +94,17 @@ }; }; + bridge-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7535_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -153,6 +164,21 @@ enable-active-high; }; + sound-adv7535 { + compatible = "simple-audio-card"; + simple-audio-card,name = "sound-adv7535"; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sai5>; + system-clock-direction-out; + }; + + simple-audio-card,codec { + sound-dai = <&adv_bridge>; + }; + }; + sound-dmic { compatible = "simple-audio-card"; simple-audio-card,name = "sound-pdm"; @@ -274,6 +300,35 @@ #interrupt-cells = <2>; }; + adv_bridge: hdmi@3d { + compatible = "adi,adv7535"; + reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>; + reg-names = "main", "cec", "edid", "packet"; + adi,dsi-lanes = <4>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7535_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7535_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + pcieclk: clock-generator@68 { compatible = "renesas,9fgv0241"; reg = <0x68>; @@ -398,6 +453,10 @@ }; }; +&lcdif1 { + status = "okay"; +}; + &micfil { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pdm>; @@ -407,6 +466,21 @@ status = "okay"; }; +&mipi_dsi { + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&adv7535_in>; + }; + }; + }; +}; + &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -433,6 +507,16 @@ status = "okay"; }; +&sai5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai5>; + assigned-clocks = <&clk IMX8MP_CLK_SAI5>; + assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + &snvs_pwrkey { status = "okay"; }; @@ -612,6 +696,14 @@ >; }; + pinctrl_sai5: sai5grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD3__AUDIOMIX_SAI5_TX_DATA00 0xd6 + MX8MP_IOMUXC_SAI5_RXD2__AUDIOMIX_SAI5_TX_BCLK 0xd6 + MX8MP_IOMUXC_SAI5_RXD1__AUDIOMIX_SAI5_TX_SYNC 0xd6 + >; + }; + pinctrl_tpm: tpmgrp { fsl,pins = < MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* Reset */ diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts index 267ceffc02d8..2c19766ebf09 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts @@ -75,7 +75,7 @@ &eqos { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_eqos>; - phy-connection-type = "rgmii-id"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts index 0afd90224a59..b11d694b98e1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts @@ -63,6 +63,50 @@ regulator-always-on; }; + reg_csi1_1v8: regulator-csi1-vdd1v8 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "CSI1_VDD1V8"; + gpio = <&expander0 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_baseboard_vdd3v3>; + }; + + reg_csi1_3v3: regulator-csi1-vdd3v3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "CSI1_VDD3V3"; + gpio = <&expander0 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd5v0>; + }; + + reg_csi2_1v8: regulator-csi2-vdd1v8 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_csi2_1v8>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "CSI2_VDD1V8"; + gpio = <&gpio3 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_baseboard_vdd3v3>; + }; + + reg_csi2_3v3: regulator-csi2-vdd3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_csi2_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "CSI2_VDD3V3"; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_vdd5v0>; + }; + regulator-vbus-usb20 { compatible = "regulator-fixed"; regulator-min-microvolt = <5000000>; @@ -413,6 +457,18 @@ >; }; + pinctrl_reg_csi2_1v8: regcsi21v8grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x19 + >; + }; + + pinctrl_reg_csi2_3v3: regcsi23v3grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x19 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi index bc312aa1bfc8..91094c227744 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi @@ -6,6 +6,8 @@ #include "imx8mp.dtsi" +#include <dt-bindings/leds/common.h> + / { model = "Polyhex i.MX8MPlus Debix SOM A"; compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp"; @@ -20,6 +22,20 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + }; }; &A53_0 { @@ -203,6 +219,12 @@ }; &iomuxc { + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts index b749e28e5ede..fea67a9282f0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts @@ -175,10 +175,14 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ptn5150>; - port { - - ptn5150_out_ep: endpoint { - remote-endpoint = <&dwc3_0_ep>; + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + ptn5150_out_ep: endpoint { + remote-endpoint = <&dwc3_0_ep>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi index d8963f32ec84..4ae4fdab461e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi @@ -420,6 +420,18 @@ reg = <0x53>; }; + eeprom0wl: eeprom@58 { + compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x50 */ + pagesize = <32>; + reg = <0x58>; + }; + + eeprom1wl: eeprom@5b { + compatible = "atmel,24c32d-wl"; /* M24C32-D WL page of 0x53 */ + pagesize = <32>; + reg = <0x5b>; + }; + ioexp: gpio@74 { compatible = "nxp,pca9539"; reg = <0x74>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts index e4215c83ee0f..da4b1807c275 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts @@ -57,8 +57,8 @@ clocks = <&clk IMX8MP_CLK_CLKOUT1>; #sound-dai-cells = <0>; - VDDA-supply = <®_vcc_3v3_audio>; - VDDD-supply = <®_vcc_1v8_audio>; + VDDA-supply = <®_vcc_3v3_audio>; + VDDD-supply = <®_vcc_1v8_audio>; VDDIO-supply = <®_vcc_1v8_audio>; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi new file mode 100644 index 000000000000..59813ef8e2bb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-reva.dtsi @@ -0,0 +1,711 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +#include "imx8mp.dtsi" + +#include <dt-bindings/leds/common.h> + +/ { + aliases { + /* some of this aliases like backlight0, ethernetX and switch0 + * are needed for the bootloader. + */ + backlight0 = &backlight; + ethernet0 = &eqos; + ethernet1 = &lan1; + ethernet2 = &lan2; + rtc0 = &i2c_rtc; + rtc1 = &snvs_rtc; + switch0 = &switch; + }; + + /* + * Backlight is present only on some of boards, so it is disabled by + * default. + */ + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pwms = <&pwm1 0 20000 0>; + power-supply = <®_24v>; + enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>; + brightness-levels = <0 255>; + num-interpolated-steps = <17>; + default-brightness-level = <8>; + status = "disabled"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led-0 { + label = "D1"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led-1 { + label = "D2"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-2 { + label = "D3"; + color = <LED_COLOR_ID_GREEN>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_1v2: regulator-1v2 { + compatible = "regulator-fixed"; + vin-supply = <®_5v_p>; + regulator-name = "1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + reg_2v5: regulator-2v5 { + compatible = "regulator-fixed"; + vin-supply = <®_5v_s>; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + vin-supply = <®_5v_s>; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + /* + * This regulator will provide power as long as possible even if + * undervoltage is detected. + */ + reg_5v_p: regulator-5v-p { + compatible = "regulator-fixed"; + regulator-name = "5V_P"; + vin-supply = <®_24v>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* + * This regulator will be automatically shutdown if undervoltage is + * detected. + */ + reg_5v_s: regulator-5v-s { + compatible = "regulator-fixed"; + regulator-name = "5V_S"; + vin-supply = <®_24v>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_24v: regulator-24v { + compatible = "regulator-fixed"; + regulator-name = "24V"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + + reg_can2rs: regulator-can2rs { + compatible = "regulator-fixed"; + regulator-name = "CAN2RS"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can2rs>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 22 GPIO_ACTIVE_LOW>; + }; + + reg_canrs: regulator-canrs { + compatible = "regulator-fixed"; + regulator-name = "CANRS"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_canrs>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 21 GPIO_ACTIVE_LOW>; + }; + + reg_tft_vcom: regulator-tft-vcom { + compatible = "pwm-regulator"; + pwms = <&pwm4 0 20000 0>; + regulator-name = "VCOM"; + vin-supply = <®_5v_s>; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + voltage-table = <3600000 26>; + status = "disabled"; + }; + + reg_vsd_3v3: regulator-vsd-3v3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_vsd_3v3>; + vin-supply = <®_vdd_3v3>; + compatible = "regulator-fixed"; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc: adc@0 { + compatible = "microchip,mcp3002"; + reg = <0>; + vref-supply = <®_vdd_3v3>; + spi-max-frequency = <1000000>; + #io-channel-cells = <1>; + }; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-txid"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_canrs>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2rs>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@25 { + compatible = "nxp,pca9450c"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>; + sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram_1v1: BUCK6 { + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs_1v8: LDO1 { + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda_1v8: LDO3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd2: LDO5 { + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_5v_p>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + i2c_rtc: rtc@51 { + compatible = "nxp,pcf85063tp"; + reg = <0x51>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>; + quartz-load-femtofarads = <12500>; + }; +}; + +&i2c4 { + clock-frequency = <380000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + switch: switch@5f { + compatible = "microchip,ksz9893"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; + reg = <0x5f>; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + lan1: port@0 { + reg = <0>; + phy-mode = "internal"; + label = "lan1"; + }; + + lan2: port@1 { + reg = <1>; + phy-mode = "internal"; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "cpu"; + ethernet = <&eqos>; + phy-mode = "rgmii"; + /* 2ns RX delay is implemented on PCB */ + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb3_1 { + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_3v3>; + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_3v3>; + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; +}; + +/* SD Card */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + vmmc-supply = <®_vsd_3v3>; + vqmmc-supply = <®_nvcc_sd2>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + status = "okay"; +}; + +/* eMMC */ +&usdhc3 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; + assigned-clock-rates = <400000000>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + no-sd; + no-sdio; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x0100 + >; + }; + + pinctrl_can2rs: can2rsgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x154 + >; + }; + + pinctrl_canrs: canrsgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x154 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 + MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 + MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 + MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 + >; + }; + + pinctrl_eqos: eqosgrp { + fsl,pins = < + MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 + MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 + MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 + MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 + MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 + MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 + MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f + MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f + MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f + MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f + MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f + MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154 + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19 + MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19 + MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2 + MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c2 + MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c2 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 + MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41 + MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04 0x41 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x116 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_MCLK__PWM4_OUT 0x116 + >; + }; + + pinctrl_reg_vsd_3v3: regvsd3v3grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x40 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x41 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x41 + MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x41 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + /* external 10 k pull up */ + /* CTP_INT */ + MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x41 + /* CTP_RST */ + MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x41 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 + MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 + MX8MP_IOMUXC_UART3_RXD__UART1_DTE_RTS 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 + MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 + MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 + MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 + MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 + MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4 + MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x1c4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 + MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 + MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 + MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 + MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 + MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 + MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 + MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 + MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 + MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 + MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts new file mode 100644 index 000000000000..c1ca69da3cb8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-hdmi.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revB - HDMI"; + compatible = "skov,imx8mp-skov-revb-hdmi", "fsl,imx8mp"; +}; + +&iomuxc { + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x1c3 + MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x1c3 + MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts new file mode 100644 index 000000000000..ccbd3abedd69 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revB - LT6"; + compatible = "skov,imx8mp-skov-revb-lt6", "fsl,imx8mp"; + + touchscreen { + compatible = "resistive-adc-touch"; + io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>; + io-channel-names = "y", "z1", "z2", "x"; + touchscreen-min-pressure = <65000>; + touchscreen-inverted-y; + touchscreen-swapped-x-y; + touchscreen-x-plate-ohms = <300>; + }; +}; + +®_tft_vcom { + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + voltage-table = <3600000 26>; + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&backlight { + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + status = "okay"; + + adc_ts: adc@0 { + compatible = "ti,tsc2046e-adc"; + reg = <0>; + pinctrl-0 = <&pinctrl_touch>; + pinctrl-names ="default"; + spi-max-frequency = <1000000>; + interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@3 { + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@4 { + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + + channel@5 { + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 + MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 + MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 + MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + /* external pull up */ + MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x40 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts new file mode 100644 index 000000000000..3c2efdc59bfa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts @@ -0,0 +1,100 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "imx8mp-skov-reva.dtsi" + +/ { + model = "SKOV IMX8MP CPU revB - MI1010AIT-1CP1"; + compatible = "skov,imx8mp-skov-revb-mi1010ait-1cp1", "fsl,imx8mp"; + + panel { + compatible = "multi-inno,mi1010ait-1cp"; + backlight = <&backlight>; + power-supply = <®_tft_vcom>; + + port { + in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + }; +}; + +&backlight { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupts-extended = <&gpio4 28 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <1280>; + touchscreen-size-y = <800>; + vcc-supply = <®_vdd_3v3>; + iovcc-supply = <®_vdd_3v3>; + wakeup-source; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + /* IMX8MP_CLK_MEDIA_LDB = IMX8MP_CLK_MEDIA_DISP2_PIX * 7 */ + assigned-clock-rates = <482300000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&in_lvds0>; + }; + }; + }; +}; + +&media_blk_ctrl { + /* currently it is not possible to let display clocks confugure + * automatically, so we need to set them manually + */ + assigned-clock-rates = <500000000>, <200000000>, <0>, + /* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */ + <68900000>, + /* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */ + <964600000>; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +®_tft_vcom { + regulator-min-microvolt = <3160000>; + regulator-max-microvolt = <3160000>; + voltage-table = <3160000 73>; + status = "okay"; +}; + +&iomuxc { + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2 + MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c2 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso new file mode 100644 index 000000000000..5058cd9409c7 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl-lvds-g133han01.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/clock/imx8mp-clock.h> + +&{/} { + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; +}; + +&backlight_lvds { + status = "okay"; +}; + +&display { + compatible = "auo,g133han01"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + panel_in_lvds0: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + panel_in_lvds1: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + }; +}; + +&lcdif2 { + status = "okay"; +}; + +&lvds_bridge { + assigned-clocks = <&clk IMX8MP_CLK_MEDIA_LDB>, + <&clk IMX8MP_VIDEO_PLL1>; + assigned-clock-parents = <&clk IMX8MP_VIDEO_PLL1_OUT>; + assigned-clock-rates = <0>, <988400000>; + status = "okay"; + + ports { + port@1 { + ldb_lvds_ch0: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + + port@2 { + ldb_lvds_ch1: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts index 4240e20d38ac..a2d5d19b2de0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts @@ -15,6 +15,7 @@ / { model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; + chassis-type = "embedded"; chosen { stdout-path = &uart4; @@ -55,6 +56,21 @@ clock-frequency = <25000000>; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "X29"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon0>; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + fan0: pwm-fan { compatible = "pwm-fan"; pinctrl-names = "default"; @@ -602,7 +618,6 @@ &usb3_1 { fsl,disable-port-power-control; fsl,permanently-attached; - dr_mode = "host"; status = "okay"; }; @@ -626,13 +641,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - label = "X29"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon0>; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi index bf47b5e9dd8c..0e8d0f3c7ea8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi @@ -8,6 +8,21 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + type = "micro"; + label = "Type-C"; + id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -132,13 +147,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - type = "micro"; - label = "Type-C"; - id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi index f942e949084b..c24587c895e1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi @@ -8,6 +8,21 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + type = "micro"; + label = "otg"; + id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -83,8 +98,15 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi2>; - cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>, + <&gpio1 10 GPIO_ACTIVE_LOW>; status = "okay"; + + tpm@1 { + compatible = "tcg,tpm_tis-spi"; + reg = <0x1>; + spi-max-frequency = <36000000>; + }; }; &gpio4 { @@ -175,13 +197,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - type = "micro"; - label = "otg"; - id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; @@ -285,6 +304,7 @@ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140 MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140 MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 + MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 >; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi index b0d42b18c5ce..628ffba69862 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi @@ -8,6 +8,21 @@ #include <dt-bindings/phy/phy-imx8-pcie.h> / { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + type = "micro"; + label = "otg"; + id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + led-controller { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -201,13 +216,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - type = "micro"; - label = "otg"; - id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts index 2ab9f4cc12cc..9caf7ca25444 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts @@ -35,6 +35,21 @@ reg = <0x0 0x40000000 0 0x80000000>; }; + connector { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbcon1>; + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + label = "Type-C"; + id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -182,8 +197,6 @@ tpm@0 { compatible = "tcg,tpm_tis-spi"; - #address-cells = <0x1>; - #size-cells = <0x1>; reg = <0x0>; spi-max-frequency = <36000000>; }; @@ -694,13 +707,10 @@ role-switch-default-mode = "peripheral"; status = "okay"; - connector { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbcon1>; - compatible = "gpio-usb-b-connector", "usb-b-connector"; - type = "micro"; - label = "Type-C"; - id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi new file mode 100644 index 000000000000..8482393f3cac --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-mallow.dtsi @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin IMX8MP SoM on Mallow carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-plus + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + /* SODIMM 52 - USER_LED_1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 54 - USER_LED_1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 56 - USER_LED_2_RED */ + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 58 - USER_LED_2_GREEN */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&backlight { + power-supply = <®_3p3v>; +}; + +/* Verdin SPI_1 */ +&ecspi1 { + pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_tpm_cs>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>, <&gpio3 16 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@1 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm_irq>; + interrupt-parent = <&gpio3>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <18500000>; + }; +}; + +/* EEPROM on Mallow */ +&eeprom_carrier_board { + status = "okay"; +}; + +/* Verdin ETH_1 */ +&eqos { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&flexcan1 { + status = "okay"; +}; + +/* Verdin CAN_2 */ +&flexcan2 { + status = "okay"; +}; + +/* Temperature sensor on Mallow */ +&hwmon_temp { + compatible = "ti,tmp1075"; + status = "okay"; +}; + +/* Verdin I2C_2_DSI */ +&i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4_CSI */ +&i2c3 { + status = "okay"; +}; + +/* Verdin I2C_1 */ +&i2c4 { + status = "okay"; +}; + +/* Verdin PCIE_1 */ +&pcie { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +/* Verdin PWM_1 */ +&pwm1 { + status = "okay"; +}; + +/* Verdin PWM_2 */ +&pwm2 { + status = "okay"; +}; + +/* Verdin PWM_3_DSI */ +&pwm3 { + status = "okay"; +}; + +®_usdhc2_vmmc { + vin-supply = <®_3p3v>; +}; + +/* Verdin UART_1 */ +&uart1 { + status = "okay"; +}; + +/* Verdin UART_2 */ +&uart2 { + status = "okay"; +}; + +/* Verdin UART_3 */ +&uart3 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usb3_0 { + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usb3_1 { + status = "okay"; +}; + +&usb3_phy1 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&usdhc2 { + status = "okay"; +}; + +&iomuxc { + pinctrl_leds: ledsgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x106>, /* SODIMM 52 */ + <MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x106>, /* SODIMM 54 */ + <MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x106>, /* SODIMM 56 */ + <MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x106>; /* SODIMM 58 */ + }; + + pinctrl_tpm_cs: tpmcsgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x82>; /* SODIMM 64 */ + }; + + pinctrl_tpm_irq: tpmirqgrp { + fsl,pins = + <MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x16>; /* SODIMM 66 */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts new file mode 100644 index 000000000000..6a536a4964bb --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-nonwifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-nonwifi.dtsi" +#include "imx8mp-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus on Mallow Board"; + compatible = "toradex,verdin-imx8mp-nonwifi-mallow", + "toradex,verdin-imx8mp-nonwifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts new file mode 100644 index 000000000000..08b7aef3fdde --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin-wifi-mallow.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + */ + +/dts-v1/; + +#include "imx8mp-verdin.dtsi" +#include "imx8mp-verdin-wifi.dtsi" +#include "imx8mp-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin iMX8M Plus WB on Mallow Board"; + compatible = "toradex,verdin-imx8mp-wifi-mallow", + "toradex,verdin-imx8mp-wifi", + "toradex,verdin-imx8mp", + "fsl,imx8mp"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi index 04f2083c4ab2..c3305f0d4001 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi @@ -45,6 +45,23 @@ status = "disabled"; }; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + label = "Type-C"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_1_id>; + self-powered; + type = "micro"; + vbus-supply = <®_usb1_vbus>; + + port { + usb_dr_connector: endpoint { + remote-endpoint = <&usb3_dwc>; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -835,15 +852,10 @@ srp-disable; usb-role-switch; - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; - label = "Type-C"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb_1_id>; - self-powered; - type = "micro"; - vbus-supply = <®_usb1_vbus>; + port { + usb3_dwc: endpoint { + remote-endpoint = <&usb_dr_connector>; + }; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 1264da6012f9..76c73daf546b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -264,6 +264,7 @@ dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; + status = "disabled"; }; }; @@ -726,6 +727,8 @@ clk: clock-controller@30380000 { compatible = "fsl,imx8mp-ccm"; reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>, <&clk_ext3>, <&clk_ext4>; @@ -793,8 +796,8 @@ <&clk IMX8MP_CLK_AUDIO_AXI>; assigned-clocks = <&clk IMX8MP_CLK_AUDIO_AHB>, <&clk IMX8MP_CLK_AUDIO_AXI_SRC>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, - <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; assigned-clock-rates = <400000000>, <600000000>; }; @@ -887,6 +890,15 @@ clocks = <&clk IMX8MP_CLK_ML_AXI>, <&clk IMX8MP_CLK_ML_AHB>, <&clk IMX8MP_CLK_NPU_ROOT>; + assigned-clocks = <&clk IMX8MP_CLK_ML_CORE>, + <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_SYS_PLL1_800M>; + assigned-clock-rates = <800000000>, + <800000000>, + <300000000>; }; }; }; @@ -2012,6 +2024,18 @@ interconnect-names = "g1", "g2", "vc8000e"; }; + npu: npu@38500000 { + compatible = "vivante,gc"; + reg = <0x38500000 0x200000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_NPU_ROOT>, + <&clk IMX8MP_CLK_NPU_ROOT>, + <&clk IMX8MP_CLK_ML_AXI>, + <&clk IMX8MP_CLK_ML_AHB>; + clock-names = "core", "shader", "bus", "reg"; + power-domains = <&pgc_mlmix>; + }; + gic: interrupt-controller@38800000 { compatible = "arm,gic-v3"; reg = <0x38800000 0x10000>, diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts index a3b9d615a3b4..e34045d10a12 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts @@ -39,7 +39,7 @@ fan: gpio-fan { compatible = "gpio-fan"; - gpio-fan,speed-map = <0 0 8600 1>; + gpio-fan,speed-map = <0 0>, <8600 1>; gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>; #cooling-cells = <2>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts index 0d8def2766f5..b302daca4ce6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts @@ -11,6 +11,7 @@ / { model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ on MBa8Mx"; compatible = "tq,imx8mq-tqma8mq-mba8mx", "tq,imx8mq-tqma8mq", "fsl,imx8mq"; + chassis-type = "embedded"; aliases { eeprom0 = &eeprom3; diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi index 8439dd6b3935..69cb8676732e 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi @@ -128,21 +128,25 @@ &lpuart0 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 13 0 0>, <&edma2 12 0 1>; + dma-names = "rx","tx"; }; &lpuart1 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 15 0 0>, <&edma2 14 0 1>; + dma-names = "rx","tx"; }; &lpuart2 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 17 0 0>, <&edma2 16 0 1>; + dma-names = "rx","tx"; }; &lpuart3 { compatible = "fsl,imx8qm-lpuart", "fsl,imx8qxp-lpuart"; dmas = <&edma2 19 0 0>, <&edma2 18 0 1>; + dma-names = "rx","tx"; }; &i2c0 { diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 99611729943c..8360bb851ac0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -31,7 +31,7 @@ }; gpio-sbu-mux { - compatible = "gpio-sbu-mux"; + compatible = "nxp,cbdtu02043", "gpio-sbu-mux"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_typec_mux>; select-gpios = <&lsio_gpio5 9 GPIO_ACTIVE_HIGH>; @@ -50,6 +50,10 @@ status = "okay"; }; +&dsp_reserved { + status = "okay"; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec1>; @@ -152,12 +156,6 @@ interrupt-parent = <&lsio_gpio1>; interrupts = <3 IRQ_TYPE_LEVEL_LOW>; - port { - typec_dr_sw: endpoint { - remote-endpoint = <&usb3_drd_sw>; - }; - }; - usb_con1: connector { compatible = "usb-c-connector"; label = "USB-C"; @@ -169,8 +167,17 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + + typec_dr_sw: endpoint { + remote-endpoint = <&usb3_drd_sw>; + }; + }; + port@1 { reg = <1>; + typec_con_ss: endpoint { remote-endpoint = <&usb3_data_ss>; }; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi new file mode 100644 index 000000000000..7894a3ab26d6 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR X11) +/* + * Copyright 2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + */ + +&vpu_core0 { + reg = <0x2d040000 0x10000>; +}; + +&vpu_core1 { + reg = <0x2d050000 0x10000>; +}; + +/delete-node/ &mu2_m0; +/delete-node/ &vpu_core2; diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi index c80c85a4b405..958267b33340 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi @@ -48,7 +48,6 @@ serial3 = &lpuart3; vpu-core0 = &vpu_core0; vpu-core1 = &vpu_core1; - vpu-core2 = &vpu_core2; }; cpus { @@ -184,6 +183,7 @@ dsp_reserved: dsp@92400000 { reg = <0 0x92400000 0 0x2000000>; no-map; + status = "disabled"; }; encoder_rpc: encoder-rpc@94400000 { @@ -317,6 +317,7 @@ }; #include "imx8qxp-ss-img.dtsi" +#include "imx8qxp-ss-vpu.dtsi" #include "imx8qxp-ss-adma.dtsi" #include "imx8qxp-ss-conn.dtsi" #include "imx8qxp-ss-lsio.dtsi" diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index 2b9d47716f75..9921ea13ab48 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -76,6 +76,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <12000>; enable-active-high; }; }; @@ -237,18 +238,19 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe - MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x400013fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x400013fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x400013fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x400013fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x400013fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x400013fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x400013fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x400013fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x400013fe MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; @@ -265,14 +267,15 @@ >; }; + /* need to config the SION for data and cmd pad, refer to ERR052021 */ pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe - MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x400013fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x400013fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x400013fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x400013fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013fe MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts new file mode 100644 index 000000000000..af795ecf678b --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts @@ -0,0 +1,709 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>, + * D-82229 Seefeld, Germany. + * Author: Markus Niebel + * Author: Alexander Stein + */ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/pwm/pwm.h> + +#include "imx93-tqma9352.dtsi" + +/{ + model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA on MBa93xxCA starter kit"; + compatible = "tq,imx93-tqma9352-mba93xxca", + "tq,imx93-tqma9352", "fsl,imx93"; + chassis-type = "embedded"; + + chosen { + stdout-path = &lpuart1; + }; + + aliases { + eeprom0 = &eeprom0; + rtc0 = &pcf85063; + rtc1 = &bbnsm_rtc; + }; + + backlight_lvds: backlight { + compatible = "pwm-backlight"; + pwms = <&tpm5 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_12v0>; + enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>; + status = "disabled"; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwmfan>; + fan-supply = <®_pwm_fan>; + #cooling-cells = <2>; + /* typical 25 kHz -> 40.000 nsec */ + pwms = <&tpm6 0 40000 PWM_POLARITY_INVERTED>; + cooling-levels = <0 32 64 128 196 240>; + pulses-per-revolution = <2>; + interrupt-parent = <&gpio2>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + switch-a { + label = "switcha"; + linux,code = <BTN_0>; + gpios = <&expander0 6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch-b { + label = "switchb"; + linux,code = <BTN_1>; + gpios = <&expander0 7 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&expander2 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&expander2 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "V_5V0_MB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "V_12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_1v5: regulator-mpcie-1v5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V5_MPCIE"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&expander0 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_mpcie_3v3: regulator-mpcie-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MPCIE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander0 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_12v0>; + }; + + thermal-zones { + cpu-thermal { + trips { + cpu_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + cpu_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&cpu_active0>; + cooling-device = <&fan0 1 1>; + }; + + map2 { + trip = <&cpu_active1>; + cooling-device = <&fan0 2 2>; + }; + + map3 { + trip = <&cpu_active2>; + cooling-device = <&fan0 3 3>; + }; + }; + }; + }; +}; + +&adc1 { + status = "okay"; +}; + +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy_eqos>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy_eqos: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos_phy>; + reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + enet-phy-lane-no-swap; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy_fec>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; + + ethphy_fec: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_phy>; + reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + enet-phy-lane-no-swap; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3v3>; + status = "okay"; +}; + +&gpio1 { + expander-irq-hog { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + input; + line-name = "PEX_INT#"; + }; + + tcpc-irq-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + input; + line-name = "USB_C_ALERT#"; + }; +}; + +&lpi2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c3>; + pinctrl-1 = <&pinctrl_lpi2c3>; + status = "okay"; + + temperature-sensor@1c { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1c>; + }; + + eeprom2: eeprom@54 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <®_3v3>; + }; + + expander0: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pexp_irq>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + vcc-supply = <®_3v3>; + gpio-line-names = "FAN_PWR_EN", "MPCIE_WAKE#", + "MPCIE_1V5_EN", "MPCIE_3V3_EN", + "MPCIE_PERST#", "MPCIE_WDISABLE#", + "BUTTON_A#", "BUTTON_B#"; + + mpcie-wake-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + input; + line-name = "MPCIE_WAKE#"; + }; + + /* + * Controls the mPCIE slot reset which is low active as + * reset signal. The output-low states, the signal is + * inactive, e.g. not in reset + */ + mpcie_rst_hog: mpcie-rst-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + output-low; + line-name = "MPCIE_PERST#"; + }; + + /* + * Controls the mPCIE slot WDISABLE pin which is low active + * as disable signal. The output-low states, the signal is + * inactive, e.g. not disabled + */ + mpcie_wdisable_hog: mpcie-wdisable-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-low; + line-name = "MPCIE_WDISABLE#"; + }; + }; + + expander1: gpio@71 { + compatible = "nxp,pca9538"; + reg = <0x71>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + gpio-line-names = "ENET1_RESET#", "ENET2_RESET#", + "USB_RESET#", "", + "WLAN_PD#", "WLAN_W_DISABLE#", + "WLAN_PERST#", "12V_EN"; + + /* + * Controls the on board USB Hub reset which is low + * active as reset signal. The output-low states, the + * signal is inactive, e.g. no reset + */ + usb-reset-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "USB_RESET#"; + }; + + /* + * Controls the WiFi card PD pin which is low active + * as power down signal. The output-high states, the signal + * is active, e.g. card is powered down + */ + wlan-pd-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + output-high; + line-name = "WLAN_PD#"; + }; + + /* + * Controls the WiFi card disable pin which is low active + * as disable signal. The output-high states, the signal + * is active, e.g. card is disabled + */ + wlan-wdisable-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-high; + line-name = "WLAN_W_DISABLE#"; + }; + + /* + * Controls the WiFi card reset pin which is low active + * as reset signal. The output-high states, the signal + * is active, e.g. card in reset + */ + wlan-perst-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + output-high; + line-name = "WLAN_PERST#"; + }; + }; + + expander2: gpio@72 { + compatible = "nxp,pca9538"; + reg = <0x72>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <®_3v3>; + gpio-line-names = "LCD_RESET#", "LCD_PWR_EN", + "LCD_BLT_EN", "DP_EN", + "MIPI_CSI_EN", "MIPI_CSI_RST#", + "USER_LED1", "USER_LED2"; + }; +}; + +&lpi2c5 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5>; + status = "okay"; +}; + +&lpspi6 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpspi6>; + pinctrl-1 = <&pinctrl_lpspi6>; + status = "okay"; +}; + +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* disabled per default, console for M33 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "disabled"; +}; + +&lpuart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + status = "okay"; +}; + +&lpuart8 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8>; + status = "okay"; +}; + +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm5>; +}; + +&tpm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm6>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_usdhc2_vmmc>; + bus-width = <4>; + no-sdio; + no-mmc; + disable-wp; + status = "okay"; +}; + +&iomuxc { + pinctrl_eqos: eqosgrp { + fsl,pins = < + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e + MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e + /* PD | FSEL_2 | DSE X6 */ + MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e + MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e + MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e + MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e + /* PD | FSEL_3 | DSE X6 */ + MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe + MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e + MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e + MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e + MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e + MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e + /* PD | FSEL_3 | DSE X3 */ + MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e + >; + }; + + pinctrl_eqos_phy: eqosphygrp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e + /* PD | FSEL_2 | DSE X6 */ + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + /* PD | FSEL_3 | DSE X6 */ + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + /* PD | FSEL_2 | DSE X4 */ + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x51e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x51e + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x51e + /* PD | FSEL_3 | DSE X3 */ + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e + >; + }; + + pinctrl_fec_phy: fecphygrp { + fsl,pins = < + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX93_PAD_GPIO_IO25__CAN2_TX 0x139e + MX93_PAD_GPIO_IO27__CAN2_RX 0x139e + >; + }; + + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e + MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + >; + }; + + pinctrl_lpspi6: lpspi6grp { + fsl,pins = < + MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x3fe + MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe + MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x3fe + MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x3fe + >; + }; + + pinctrl_pexp_irq: pexpirqgrp { + fsl,pins = < + MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306 + >; + }; + + pinctrl_pwmfan: pwmfangrp { + fsl,pins = < + MX93_PAD_GPIO_IO09__GPIO2_IO09 0x1306 + >; + }; + + pinctrl_tpm5: tpm5grp { + fsl,pins = < + MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e + >; + }; + + pinctrl_tpm6: tpm6grp { + fsl,pins = < + MX93_PAD_GPIO_IO08__TPM6_CH0 0x57e + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX93_PAD_UART2_TXD__LPUART2_TX 0x31e + MX93_PAD_UART2_RXD__LPUART2_RX 0x31e + MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x51e + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e + MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e + MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e + >; + }; + + pinctrl_uart8: uart8grp { + fsl,pins = < + MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e + MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; + + pinctrl_usdhc2_hs: usdhc2hsgrp { + fsl,pins = < + /* HYS | PD | PU | FSEL_3 | DSE X5 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be + /* HYS | PD | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + /* HYS | PD | PU | FSEL_3 | DSE X3 */ + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e + /* PD | PU | FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + >; + }; + + pinctrl_usdhc2_uhs: usdhc2uhsgrp { + fsl,pins = < + /* HYS | PD | PU | FSEL_3 | DSE X6 */ + MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe + /* HYS | PD | PU | FSEL_3 | DSE X4 */ + MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e + /* PD | PU | FSEL_2 | DSE X3 */ + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts index 3c5c67ebee5d..eb3f4cfb6986 100644 --- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts +++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts @@ -18,6 +18,7 @@ model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC"; compatible = "tq,imx93-tqma9352-mba93xxla", "tq,imx93-tqma9352", "fsl,imx93"; + chassis-type = "embedded"; chosen { stdout-path = &lpuart1; diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index 34c0540276d1..8f2e7c42ad6e 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -171,6 +171,18 @@ status = "disabled"; }; + mqs1: mqs1 { + compatible = "fsl,imx93-mqs"; + gpr = <&aonmix_ns_gpr>; + status = "disabled"; + }; + + mqs2: mqs2 { + compatible = "fsl,imx93-mqs"; + gpr = <&wakeupmix_gpr>; + status = "disabled"; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -282,6 +294,19 @@ status = "disabled"; }; + i3c1: i3c-master@44330000 { + compatible = "silvaco,i3c-master-v1"; + reg = <0x44330000 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&clk IMX93_CLK_BUS_AON>, + <&clk IMX93_CLK_I3C1_GATE>, + <&clk IMX93_CLK_I3C1_SLOW>; + clock-names = "pclk", "fast_clk", "slow_clk"; + status = "disabled"; + }; + lpi2c1: i2c@44340000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x44340000 0x10000>; @@ -367,6 +392,19 @@ status = "disabled"; }; + sai1: sai@443b0000 { + compatible = "fsl,imx93-sai"; + reg = <0x443b0000 0x10000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma1 22 0 1>, <&edma1 21 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + iomuxc: pinctrl@443c0000 { compatible = "fsl,imx93-iomuxc"; reg = <0x443c0000 0x10000>; @@ -395,6 +433,8 @@ #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; clock-names = "osc_32k", "osc_24m", "clk_ext1"; + assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>; + assigned-clock-rates = <393216000>; status = "okay"; }; @@ -422,9 +462,10 @@ }; }; - anatop: anatop@44480000 { - compatible = "fsl,imx93-anatop", "syscon"; + clock-controller@44480000 { + compatible = "fsl,imx93-anatop"; reg = <0x44480000 0x2000>; + #clock-cells = <1>; }; tmu: tmu@44482000 { @@ -447,6 +488,21 @@ #thermal-sensor-cells = <1>; }; + micfil: micfil@44520000 { + compatible = "fsl,imx93-micfil"; + reg = <0x44520000 0x10000>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_PDM_IPG>, + <&clk IMX93_CLK_PDM_GATE>, + <&clk IMX93_CLK_AUDIO_PLL>; + clock-names = "ipg_clk", "ipg_clk_app", "pll8k"; + dmas = <&edma1 29 0 5>; + dma-names = "rx"; + status = "disabled"; + }; adc1: adc@44530000 { compatible = "nxp,imx93-adc"; @@ -473,7 +529,6 @@ compatible = "fsl,imx93-edma4"; reg = <0x42000000 0x210000>; #dma-cells = <3>; - shared-interrupt; dma-channels = <64>; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, @@ -616,6 +671,19 @@ status = "disabled"; }; + i3c2: i3c-master@42520000 { + compatible = "silvaco,i3c-master-v1"; + reg = <0x42520000 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <0>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_I3C2_GATE>, + <&clk IMX93_CLK_I3C2_SLOW>; + clock-names = "pclk", "fast_clk", "slow_clk"; + status = "disabled"; + }; + lpi2c3: i2c@42530000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x42530000 0x10000>; @@ -738,6 +806,51 @@ status = "disabled"; }; + sai2: sai@42650000 { + compatible = "fsl,imx93-sai"; + reg = <0x42650000 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 59 0 1>, <&edma2 58 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@42660000 { + compatible = "fsl,imx93-sai"; + reg = <0x42660000 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 61 0 1>, <&edma2 60 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + xcvr: xcvr@42680000 { + compatible = "fsl,imx93-xcvr"; + reg = <0x42680000 0x800>, + <0x42680800 0x400>, + <0x42680c00 0x080>, + <0x42680e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_SPDIF_GATE>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_AUD_XCVR_GATE>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&edma2 65 0 1>, <&edma2 66 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lpuart7: serial@42690000 { compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; @@ -755,7 +868,7 @@ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART8_GATE>; clock-names = "ipg"; - dmas = <&edma2 90 0 1>, <&edma2 89 0 0>; + dmas = <&edma2 90 0 1>, <&edma2 89 0 0>; dma-names = "rx", "tx"; status = "disabled"; }; @@ -874,7 +987,7 @@ <&clk IMX93_CLK_USDHC1_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <8>; - fsl,tuning-start-tap = <20>; + fsl,tuning-start-tap = <1>; fsl,tuning-step = <2>; status = "disabled"; }; @@ -888,7 +1001,7 @@ <&clk IMX93_CLK_USDHC2_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-start-tap = <20>; + fsl,tuning-start-tap = <1>; fsl,tuning-step = <2>; status = "disabled"; }; @@ -951,7 +1064,7 @@ <&clk IMX93_CLK_USDHC3_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; - fsl,tuning-start-tap = <20>; + fsl,tuning-start-tap = <1>; fsl,tuning-step = <2>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi index 970047f2dabd..299c4ab630e8 100644 --- a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi @@ -10,10 +10,9 @@ / { spmi: spmi@fff24000 { compatible = "hisilicon,kirin970-spmi-controller"; + reg = <0x0 0xfff24000 0x0 0x1000>; #address-cells = <2>; #size-cells = <0>; - status = "okay"; - reg = <0x0 0xfff24000 0x0 0x1000>; hisilicon,spmi-channel = <2>; pmic: pmic@0 { @@ -25,9 +24,6 @@ gpios = <&gpio28 0 0>; regulators { - #address-cells = <1>; - #size-cells = <0>; - ldo3: ldo3 { /* HDMI */ regulator-name = "ldo3"; regulator-min-microvolt = <1500000>; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index d3adb6a130ae..76aafa172eb0 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -60,6 +60,25 @@ }; }; + firmware { + svc { + compatible = "intel,agilex-svc"; + method = "smc"; + memory-region = <&service_reserved>; + + fpga_mgr: fpga-mgr { + compatible = "intel,agilex-soc-fpga-mgr"; + }; + }; + }; + + fpga-region { + compatible = "fpga-region"; + #address-cells = <0x2>; + #size-cells = <0x2>; + fpga-mgr = <&fpga_mgr>; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, @@ -130,7 +149,7 @@ compatible = "usb-nop-xceiv"; }; - soc { + soc@0 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -138,13 +157,6 @@ interrupt-parent = <&intc>; ranges = <0 0 0 0xffffffff>; - base_fpga_region { - #address-cells = <0x2>; - #size-cells = <0x2>; - compatible = "fpga-region"; - fpga-mgr = <&fpga_mgr>; - }; - clkmgr: clock-controller@ffd10000 { compatible = "intel,agilex-clkmgr"; reg = <0xffd10000 0x1000>; @@ -368,7 +380,7 @@ pinctrl-single,function-mask = <0x0000000f>; }; - pinctrl1: pinconf@ffd13100 { + pinctrl1: pinctrl@ffd13100 { compatible = "pinctrl-single"; #pinctrl-cells = <1>; reg = <0xffd13100 0x20>; @@ -659,17 +671,5 @@ status = "disabled"; }; - - firmware { - svc { - compatible = "intel,agilex-svc"; - method = "smc"; - memory-region = <&service_reserved>; - - fpga_mgr: fpga-mgr { - compatible = "intel,agilex-soc-fpga-mgr"; - }; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi index dcdaf7064953..d66d425e45b7 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi @@ -73,7 +73,7 @@ ranges; #interrupt-cells = <3>; #address-cells = <2>; - #size-cells =<2>; + #size-cells = <2>; interrupt-controller; #redistributor-regions = <1>; redistributor-stride = <0x0 0x20000>; @@ -315,7 +315,7 @@ num-cs = <4>; clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>; dmas = <&dmac0 2>, <&dmac0 3>; - dma-names ="tx", "rx"; + dma-names = "tx", "rx"; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts index 1a32840c74e0..d22de06e9839 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_n6000.dts @@ -26,7 +26,7 @@ reg = <0 0x80000000 0 0>; }; - soc { + soc@0 { bus@80000000 { compatible = "simple-bus"; reg = <0x80000000 0x60000000>, diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts index 053690657675..ad99aefeb185 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts @@ -113,8 +113,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <2>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts index 5ddfdff37c25..2d70a92c2090 100644 --- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts +++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts @@ -25,12 +25,11 @@ reg = <0 0x80000000 0 0>; }; - soc { + soc@0 { sdram_edac: memory-controller@f87f8000 { compatible = "snps,ddrc-3.80a"; reg = <0xf87f8000 0x400>; interrupts = <0 175 4>; - status = "okay"; }; }; }; @@ -91,8 +90,6 @@ spi-max-frequency = <100000000>; m25p,fast-read; - cdns,page-size = <256>; - cdns,block-size = <16>; cdns,read-delay = <2>; cdns,tshsl-ns = <50>; cdns,tsd2d-ns = <50>; diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index 79ac09b58a89..99b8cb3c49e1 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb +dtb-$(CONFIG_ARCH_MVEBU) += ac5x-rd-carrier-cn9131.dtb dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts new file mode 100644 index 000000000000..2a0b07000089 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the AC5X RD Type 7 Com Express carrier board, + * Utilizing the CN913x COM Express CPU module board. + * This specific carrier board in this mode of operation (external) + * only maintains a PCIe link with the CPU module, + * which does not require any special DTS definitions. + * + * AC5X RD works here in external mode (switch selectable at the back of the + * board), and connect via an external cable a kit + * which would allow it to use an external CN9131 CPU COM Express module, + * mounted on top of an interposer kit. + * + * So in this case, once the switch is set to external mode as explained above, + * the AC5X RD becomes part of the carrier solution. + * + * When the board boots in the external CPU mode, the internal CPU is disabled, + * and only the switch portion of the SOC acts as a PCIe end-point, Hence there + * is no need to describe this internal (disabled CPU) in the device tree. + * + * There is no CPU booting in this mode on the carrier, only on the + * CN9131 COM Express CPU module. + * What runs the Linux is the CN9131 on the COM Express CPU module, + * And it accesses the switch end-point on the AC5X RD portion of the carrier + * via PCIe. + */ + +#include "cn9131-db-comexpress.dtsi" +#include "ac5x-rd-carrier.dtsi" + +/ { + model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board with CN9131 CPU module"; + compatible = "marvell,cn9131-ac5x-carrier", "marvell,rd-ac5x-carrier", + "marvell,cn9131-cpu-module", "marvell,cn9131", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x2 0x00000000>; + }; + +}; diff --git a/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi new file mode 100644 index 000000000000..f98629abb58b --- /dev/null +++ b/arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the AC5X RD Type 7 Com Express carrier board, + * This specific board in external mode (see below) only maintains + * a PCIe link with the COM Express CPU module, which does not + * require any special DTS definitions. + * + * AC5X RD can either work as you would expect, as a complete standalone + * box using the internal CPU, or you can move the switch on the back of + * the box to "external" mode, and connect via an external cable a kit + * which would allow it to use an external CPU COM Express module, + * mounted on top of an interposer kit. + * + * So in this case, once the switch is set to external mode as explained above, + * the AC5X RD becomes part of the carrier solution. + * This is a development/reference solution, not a full commercial solution, + * hence it was designed with the flexibility to be configured in different + * modes of operation. + * + * When the board boots in the external CPU mode, the internal CPU is disabled, + * and only the switch portion of the SOC acts as a PCIe end-point, Hence there + * is no need to describe this internal (disabled CPU) in the device tree. + * + * There is no CPU booting in this mode on the carrier, + * only on the COM Express CPU module. + */ + +/ { + model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board"; + compatible = "marvell,rd-ac5x-carrier"; + +}; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts index f9abef8dcc94..870bb380a40a 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts @@ -126,32 +126,32 @@ reset-gpios = <&gpiosb 23 GPIO_ACTIVE_LOW>; - ports { - switch0port1: port@1 { + ethernet-ports { + switch0port1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&switch0phy2>; }; - switch0port4: port@4 { + switch0port4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - switch0port5: port@5 { + switch0port5: ethernet-port@5 { reg = <5>; label = "wan"; phy-handle = <&extphy>; @@ -160,7 +160,7 @@ }; mdio { - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index 49cbdb55b4b3..fed2dcecb323 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -145,19 +145,17 @@ }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - switch0port0: port@0 { + switch0port0: ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -168,19 +166,19 @@ }; }; - switch0port1: port@1 { + switch0port1: ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - switch0port2: port@2 { + switch0port2: ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - switch0port3: port@3 { + switch0port3: ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -192,13 +190,13 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts index b1b45b4fa9d4..63fbc8352161 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts @@ -152,31 +152,29 @@ }; &mdio { - switch0: switch0@1 { + switch0: ethernet-switch@1 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <1>; dsa,member = <0 0>; - ports: ports { + ports: ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; @@ -185,7 +183,7 @@ nvmem-cell-names = "mac-address"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; @@ -199,13 +197,13 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index 9eab2bb22134..f1a9f2234359 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -130,7 +130,7 @@ compatible = "microchip,mcp7940x"; reg = <0x6f>; interrupt-parent = <&gpiosb>; - interrupts = <5 0>; /* GPIO2_5 */ + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */ }; }; @@ -304,9 +304,15 @@ reg = <1>; }; - /* switch nodes are enabled by U-Boot if modules are present */ + /* + * NOTE: switch nodes are enabled by U-Boot if modules are present + * DO NOT change this node name (switch0@10) even if it is not following + * conventions! Deployed U-Boot binaries are explicitly looking for + * this node in order to augment the device tree! + * Also do not touch the "ports" or "port@n" nodes. These are also ABI. + */ switch0@10 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x10>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; @@ -317,35 +323,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -430,8 +436,9 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch0@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 0>; interrupt-parent = <&moxtet>; @@ -442,19 +449,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1_topaz: switch0phy1@11 { + switch0phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch0phy2_topaz: switch0phy2@12 { + switch0phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch0phy3_topaz: switch0phy3@13 { + switch0phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch0phy4_topaz: switch0phy4@14 { + switch0phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -497,8 +504,9 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@11 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x11>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; @@ -509,35 +517,35 @@ #address-cells = <1>; #size-cells = <0>; - switch1phy1: switch1phy1@1 { + switch1phy1: ethernet-phy@1 { reg = <0x1>; }; - switch1phy2: switch1phy2@2 { + switch1phy2: ethernet-phy@2 { reg = <0x2>; }; - switch1phy3: switch1phy3@3 { + switch1phy3: ethernet-phy@3 { reg = <0x3>; }; - switch1phy4: switch1phy4@4 { + switch1phy4: ethernet-phy@4 { reg = <0x4>; }; - switch1phy5: switch1phy5@5 { + switch1phy5: ethernet-phy@5 { reg = <0x5>; }; - switch1phy6: switch1phy6@6 { + switch1phy6: ethernet-phy@6 { reg = <0x6>; }; - switch1phy7: switch1phy7@7 { + switch1phy7: ethernet-phy@7 { reg = <0x7>; }; - switch1phy8: switch1phy8@8 { + switch1phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -622,8 +630,9 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch1@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 1>; interrupt-parent = <&moxtet>; @@ -634,19 +643,19 @@ #address-cells = <1>; #size-cells = <0>; - switch1phy1_topaz: switch1phy1@11 { + switch1phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch1phy2_topaz: switch1phy2@12 { + switch1phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch1phy3_topaz: switch1phy3@13 { + switch1phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch1phy4_topaz: switch1phy4@14 { + switch1phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; @@ -689,8 +698,9 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@12 { - compatible = "marvell,mv88e6190"; + compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190"; reg = <0x12>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; @@ -701,35 +711,35 @@ #address-cells = <1>; #size-cells = <0>; - switch2phy1: switch2phy1@1 { + switch2phy1: ethernet-phy@1 { reg = <0x1>; }; - switch2phy2: switch2phy2@2 { + switch2phy2: ethernet-phy@2 { reg = <0x2>; }; - switch2phy3: switch2phy3@3 { + switch2phy3: ethernet-phy@3 { reg = <0x3>; }; - switch2phy4: switch2phy4@4 { + switch2phy4: ethernet-phy@4 { reg = <0x4>; }; - switch2phy5: switch2phy5@5 { + switch2phy5: ethernet-phy@5 { reg = <0x5>; }; - switch2phy6: switch2phy6@6 { + switch2phy6: ethernet-phy@6 { reg = <0x6>; }; - switch2phy7: switch2phy7@7 { + switch2phy7: ethernet-phy@7 { reg = <0x7>; }; - switch2phy8: switch2phy8@8 { + switch2phy8: ethernet-phy@8 { reg = <0x8>; }; }; @@ -805,8 +815,9 @@ }; }; + /* NOTE: this node name is ABI, don't change it! */ switch2@2 { - compatible = "marvell,mv88e6085"; + compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085"; reg = <0x2>; dsa,member = <0 2>; interrupt-parent = <&moxtet>; @@ -817,19 +828,19 @@ #address-cells = <1>; #size-cells = <0>; - switch2phy1_topaz: switch2phy1@11 { + switch2phy1_topaz: ethernet-phy@11 { reg = <0x11>; }; - switch2phy2_topaz: switch2phy2@12 { + switch2phy2_topaz: ethernet-phy@12 { reg = <0x12>; }; - switch2phy3_topaz: switch2phy3@13 { + switch2phy3_topaz: ethernet-phy@13 { reg = <0x13>; }; - switch2phy4_topaz: switch2phy4@14 { + switch2phy4_topaz: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 48202810bf78..40b7ee7ead72 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -301,10 +301,8 @@ }; /* 88E6141 Topaz switch */ - switch: switch@3 { + switch: ethernet-switch@3 { compatible = "marvell,mv88e6085"; - #address-cells = <1>; - #size-cells = <0>; reg = <3>; pinctrl-names = "default"; @@ -314,35 +312,35 @@ interrupt-parent = <&cp0_gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - swport1: port@1 { + swport1: ethernet-port@1 { reg = <1>; label = "lan0"; phy-handle = <&swphy1>; }; - swport2: port@2 { + swport2: ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&swphy2>; }; - swport3: port@3 { + swport3: ethernet-port@3 { reg = <3>; label = "lan2"; phy-handle = <&swphy3>; }; - swport4: port@4 { + swport4: ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&swphy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp0_eth1>; @@ -355,19 +353,19 @@ #address-cells = <1>; #size-cells = <0>; - swphy1: swphy1@17 { + swphy1: ethernet-phy@17 { reg = <17>; }; - swphy2: swphy2@18 { + swphy2: ethernet-phy@18 { reg = <18>; }; - swphy3: swphy3@19 { + swphy3: ethernet-phy@19 { reg = <19>; }; - swphy4: swphy4@20 { + swphy4: ethernet-phy@20 { reg = <20>; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts index 4125202028c8..67892f0d2863 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts @@ -497,42 +497,42 @@ reset-deassert-us = <10000>; }; - switch0: switch0@4 { + switch0: ethernet-switch@4 { compatible = "marvell,mv88e6085"; reg = <4>; pinctrl-names = "default"; pinctrl-0 = <&cp1_switch_reset_pins>; reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan2"; phy-handle = <&switch0phy0>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan1"; phy-handle = <&switch0phy1>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan4"; phy-handle = <&switch0phy2>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "lan3"; phy-handle = <&switch0phy3>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "cpu"; ethernet = <&cp1_eth2>; @@ -545,19 +545,19 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy0: switch0phy0@11 { + switch0phy0: ethernet-phy@11 { reg = <0x11>; }; - switch0phy1: switch0phy1@12 { + switch0phy1: ethernet-phy@12 { reg = <0x12>; }; - switch0phy2: switch0phy2@13 { + switch0phy2: ethernet-phy@13 { reg = <0x13>; }; - switch0phy3: switch0phy3@14 { + switch0phy3: ethernet-phy@14 { reg = <0x14>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi index 47d45ff3d6f5..6fcc34f7b464 100644 --- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi @@ -207,11 +207,9 @@ reg = <0>; }; - switch6: switch0@6 { + switch6: ethernet-switch@6 { /* Actual device is MV88E6393X */ compatible = "marvell,mv88e6190"; - #address-cells = <1>; - #size-cells = <0>; reg = <6>; interrupt-parent = <&cp0_gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; @@ -220,59 +218,59 @@ dsa,member = <0 0>; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@1 { + ethernet-port@1 { reg = <1>; label = "p1"; phy-handle = <&switch0phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "p2"; phy-handle = <&switch0phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "p3"; phy-handle = <&switch0phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "p4"; phy-handle = <&switch0phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; label = "p5"; phy-handle = <&switch0phy5>; }; - port@6 { + ethernet-port@6 { reg = <6>; label = "p6"; phy-handle = <&switch0phy6>; }; - port@7 { + ethernet-port@7 { reg = <7>; label = "p7"; phy-handle = <&switch0phy7>; }; - port@8 { + ethernet-port@8 { reg = <8>; label = "p8"; phy-handle = <&switch0phy8>; }; - port@9 { + ethernet-port@9 { reg = <9>; label = "p9"; phy-mode = "10gbase-r"; @@ -280,7 +278,7 @@ managed = "in-band-status"; }; - port@a { + ethernet-port@a { reg = <10>; ethernet = <&cp0_eth0>; phy-mode = "10gbase-r"; @@ -293,35 +291,35 @@ #address-cells = <1>; #size-cells = <0>; - switch0phy1: switch0phy1@1 { + switch0phy1: ethernet-phy@1 { reg = <0x1>; }; - switch0phy2: switch0phy2@2 { + switch0phy2: ethernet-phy@2 { reg = <0x2>; }; - switch0phy3: switch0phy3@3 { + switch0phy3: ethernet-phy@3 { reg = <0x3>; }; - switch0phy4: switch0phy4@4 { + switch0phy4: ethernet-phy@4 { reg = <0x4>; }; - switch0phy5: switch0phy5@5 { + switch0phy5: ethernet-phy@5 { reg = <0x5>; }; - switch0phy6: switch0phy6@6 { + switch0phy6: ethernet-phy@6 { reg = <0x6>; }; - switch0phy7: switch0phy7@7 { + switch0phy7: ethernet-phy@7 { reg = <0x7>; }; - switch0phy8: switch0phy8@8 { + switch0phy8: ethernet-phy@8 { reg = <0x8>; }; }; diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi new file mode 100644 index 000000000000..028496ebc473 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi @@ -0,0 +1,96 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the CN9130-DB Com Express CPU module board. + */ + +#include "cn9130-db.dtsi" + +/ { + model = "Marvell Armada CN9130-DB COM EXPRESS type 7 CPU module board"; + compatible = "marvell,cn9130-cpu-module", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + +}; + +&ap0_reg_sd_vccq { + regulator-max-microvolt = <1800000>; + states = <1800000 0x1 1800000 0x0>; + /delete-property/ gpios; +}; + +&cp0_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_usb3_vbus1 { + /delete-property/ gpio; +}; + +&cp0_reg_sd_vcc { + status = "disabled"; +}; + +&cp0_reg_sd_vccq { + status = "disabled"; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_eth0 { + status = "disabled"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + status = "disabled"; +}; + +&cp0_mdio { + status = "okay"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + phy0: ethernet-phy@0 { + status = "okay"; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + }; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_spi1 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + /delete-property/ phys; +}; diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi new file mode 100644 index 000000000000..6f3914bcfd01 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2023 Marvell International Ltd. + * + * Device tree for the CN9131-DB Com Express CPU module board. + */ + +#include "cn9131-db.dtsi" + +/ { + model = "Marvell Armada CN9131-DB COM EXPRESS type 7 CPU module board"; + compatible = "marvell,cn9131-cpu-module", "marvell,cn9131", "marvell,cn9130", + "marvell,armada-ap807-quad", "marvell,armada-ap807"; + +}; + +&ap0_reg_sd_vccq { + regulator-max-microvolt = <1800000>; + states = <1800000 0x1 1800000 0x0>; + /delete-property/ gpios; +}; + +&cp0_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_usb3_vbus1 { + /delete-property/ gpio; +}; + +&cp1_reg_usb3_vbus0 { + /delete-property/ gpio; +}; + +&cp0_reg_sd_vcc { + status = "disabled"; +}; + +&cp0_reg_sd_vccq { + status = "disabled"; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_eth0 { + status = "disabled"; +}; + +&cp0_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&cp0_eth2 { + status = "disabled"; +}; + +&cp0_mdio { + status = "okay"; + pinctrl-0 = <&cp0_ge_mdio_pins>; + phy0: ethernet-phy@0 { + status = "okay"; + }; +}; + +&cp0_syscon0 { + cp0_pinctrl: pinctrl { + compatible = "marvell,cp115-standalone-pinctrl"; + + cp0_ge_mdio_pins: ge-mdio-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "ge"; + }; + }; +}; + +&cp0_sdhci0 { + status = "disabled"; +}; + +&cp0_spi1 { + status = "okay"; +}; + +&cp0_usb3_0 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy0>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp0_usb3_1 { + status = "okay"; + usb-phy = <&cp0_usb3_0_phy1>; + phy-names = "usb"; + /delete-property/ phys; +}; + +&cp1_usb3_1 { + status = "okay"; + usb-phy = <&cp1_usb3_0_phy0>; + /* Generic PHY, providing serdes lanes */ + phys = <&cp1_comphy3 1>; + phy-names = "usb"; +}; diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index e6e7592a3645..1e6f91731e92 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -32,10 +32,16 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-fennel14-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-juniper-sku16.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kappa.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-kenzo.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku0.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-makomo-sku1.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-pico6.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-jacuzzi-willow-sku1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kakadu-sku22.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku32.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-katsu-sku38.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku16.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku272.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku288.dtb @@ -44,6 +50,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi index b605313bed99..a1b96013f814 100644 --- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi @@ -8,8 +8,6 @@ pmic: pmic { compatible = "mediatek,mt6358"; interrupt-controller; - interrupt-parent = <&pio>; - interrupts = <182 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; mt6358codec: mt6358codec { @@ -128,7 +126,6 @@ }; mt6358_vrf12_reg: ldo_vrf12 { - compatible = "regulator-fixed"; regulator-name = "vrf12"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -136,7 +133,6 @@ }; mt6358_vio18_reg: ldo_vio18 { - compatible = "regulator-fixed"; regulator-name = "vio18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -153,7 +149,6 @@ }; mt6358_vcamio_reg: ldo_vcamio { - compatible = "regulator-fixed"; regulator-name = "vcamio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -168,7 +163,6 @@ }; mt6358_vcn18_reg: ldo_vcn18 { - compatible = "regulator-fixed"; regulator-name = "vcn18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -176,7 +170,6 @@ }; mt6358_vfe28_reg: ldo_vfe28 { - compatible = "regulator-fixed"; regulator-name = "vfe28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -193,7 +186,6 @@ }; mt6358_vcn28_reg: ldo_vcn28 { - compatible = "regulator-fixed"; regulator-name = "vcn28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -218,7 +210,6 @@ }; mt6358_vxo22_reg: ldo_vxo22 { - compatible = "regulator-fixed"; regulator-name = "vxo22"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; @@ -234,7 +225,6 @@ }; mt6358_vaux18_reg: ldo_vaux18 { - compatible = "regulator-fixed"; regulator-name = "vaux18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -249,7 +239,6 @@ }; mt6358_vbif28_reg: ldo_vbif28 { - compatible = "regulator-fixed"; regulator-name = "vbif28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -280,7 +269,6 @@ }; mt6358_vio28_reg: ldo_vio28 { - compatible = "regulator-fixed"; regulator-name = "vio28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -288,7 +276,6 @@ }; mt6358_va12_reg: ldo_va12 { - compatible = "regulator-fixed"; regulator-name = "va12"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -297,22 +284,14 @@ }; mt6358_vrf18_reg: ldo_vrf18 { - compatible = "regulator-fixed"; regulator-name = "vrf18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <120>; }; - mt6358_vcn33_bt_reg: ldo_vcn33_bt { - regulator-name = "vcn33_bt"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3500000>; - regulator-enable-ramp-delay = <270>; - }; - - mt6358_vcn33_wifi_reg: ldo_vcn33_wifi { - regulator-name = "vcn33_wifi"; + mt6358_vcn33_reg: ldo_vcn33 { + regulator-name = "vcn33"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3500000>; regulator-enable-ramp-delay = <270>; @@ -340,7 +319,6 @@ }; mt6358_vaud28_reg: ldo_vaud28 { - compatible = "regulator-fixed"; regulator-name = "vaud28"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts index c46682150e50..a1f42048dcc7 100644 --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts @@ -153,8 +153,7 @@ reg = <0>; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 54 0>; ports { diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts index b876e501216b..d06d4af43cbf 100644 --- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts @@ -205,8 +205,7 @@ reg = <31>; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>; reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi index bdcd35cecad9..90cbbc18a483 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtsi @@ -13,8 +13,7 @@ touchscreen2: touchscreen@34 { compatible = "melfas,mip4_ts"; reg = <0x34>; - interrupt-parent = <&pio>; - interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; /* @@ -26,8 +25,7 @@ compatible = "hid-over-i2c"; reg = <0x20>; hid-descr-addr = <0x0020>; - interrupt-parent = <&pio>; - interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -39,8 +37,7 @@ */ trackpad2: trackpad@2c { compatible = "hid-over-i2c"; - interrupt-parent = <&pio>; - interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; reg = <0x2c>; hid-descr-addr = <0x0020>; wakeup-source; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi index 111495622cac..8d614ac2c58e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi @@ -245,8 +245,7 @@ reg = <0x1a>; avdd-supply = <&mt6397_vgp1_reg>; cpvdd-supply = <&mt6397_vcama_reg>; - interrupt-parent = <&pio>; - interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + interrupts-extended = <&pio 3 IRQ_TYPE_EDGE_BOTH>; pinctrl-names = "default"; pinctrl-0 = <&rt5650_irq>; #sound-dai-cells = <1>; @@ -308,8 +307,7 @@ da9211: da9211@68 { compatible = "dlg,da9211"; reg = <0x68>; - interrupt-parent = <&pio>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 15 IRQ_TYPE_LEVEL_LOW>; regulators { da9211_vcpu_reg: BUCKA { @@ -353,8 +351,7 @@ touchscreen: touchscreen@10 { compatible = "elan,ekth3500"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <88 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -366,8 +363,7 @@ trackpad: trackpad@15 { compatible = "elan,ekth3000"; - interrupt-parent = <&pio>; - interrupts = <117 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>; reg = <0x15>; vcc-supply = <&mt6397_vgp6_reg>; wakeup-source; @@ -439,8 +435,7 @@ btmrvl: btmrvl@2 { compatible = "marvell,sd8897-bt"; reg = <2>; - interrupt-parent = <&pio>; - interrupts = <119 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 119 IRQ_TYPE_LEVEL_LOW>; marvell,wakeup-pin = /bits/ 16 <0x0d>; marvell,wakeup-gap-ms = /bits/ 16 <0x64>; }; @@ -448,8 +443,7 @@ mwifiex: mwifiex@1 { compatible = "marvell,sd8897"; reg = <1>; - interrupt-parent = <&pio>; - interrupts = <38 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 38 IRQ_TYPE_LEVEL_LOW>; marvell,wakeup-pin = <3>; }; }; @@ -933,8 +927,7 @@ compatible = "mediatek,mt6397"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&pio>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; @@ -1160,8 +1153,7 @@ compatible = "google,cros-ec-spi"; reg = <0x0>; spi-max-frequency = <12000000>; - interrupt-parent = <&pio>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 0 IRQ_TYPE_LEVEL_LOW>; google,cros-ec-spi-msg-delay = <500>; i2c_tunnel: i2c-tunnel0 { diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index d258c80213b2..0e5c628d1ec3 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -303,8 +303,7 @@ pmic: pmic { compatible = "mediatek,mt6397"; - interrupt-parent = <&pio>; - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index c47d7d900f28..cac4cd0a0320 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -1368,10 +1368,9 @@ #clock-cells = <1>; }; - vcodec_dec: vcodec@16000000 { + vcodec_dec: vcodec@16020000 { compatible = "mediatek,mt8173-vcodec-dec"; - reg = <0 0x16000000 0 0x100>, /* VDEC_SYS */ - <0 0x16020000 0 0x1000>, /* VDEC_MISC */ + reg = <0 0x16020000 0 0x1000>, /* VDEC_MISC */ <0 0x16021000 0 0x800>, /* VDEC_LD */ <0 0x16021800 0 0x800>, /* VDEC_TOP */ <0 0x16022000 0 0x1000>, /* VDEC_CM */ @@ -1382,6 +1381,8 @@ <0 0x16027000 0 0x800>, /* VDEC_HWQ */ <0 0x16027800 0 0x800>, /* VDEC_HWB */ <0 0x16028400 0 0x400>; /* VDEC_HWG */ + reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp", + "hwd", "hwq", "hwb", "hwg"; interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, <&iommu M4U_PORT_HW_VDEC_PP_EXT>, @@ -1392,6 +1393,7 @@ <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; mediatek,vpu = <&vpu>; + mediatek,vdecsys = <&vdecsys>; power-domains = <&spm MT8173_POWER_DOMAIN_VDEC>; clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, <&topckgen CLK_TOP_UNIVPLL_D2>, diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts index 77f9ab94c00b..681deddffc2a 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts @@ -381,6 +381,10 @@ }; }; +&pmic { + interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>; +}; + &mfg { domain-supply = <&mt6358_vgpu_reg>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi index 2c69e7658dba..8b57706ac814 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi @@ -11,8 +11,7 @@ pinctrl-0 = <&da7219_pins>; compatible = "dlg,da7219"; reg = <0x1a>; - interrupt-parent = <&pio>; - interrupts = <165 IRQ_TYPE_LEVEL_LOW 165 0>; + interrupts-extended = <&pio 165 IRQ_TYPE_LEVEL_LOW>; dlg,micbias-lvl = <2600>; dlg,mic-amp-in-sel = "diff"; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi index 0799c48ade19..548e22c194a2 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi @@ -11,8 +11,7 @@ pinctrl-0 = <&ts3a227e_pins>; compatible = "ti,ts3a227e"; reg = <0x3b>; - interrupt-parent = <&pio>; - interrupts = <157 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 157 IRQ_TYPE_LEVEL_LOW>; status = "okay"; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts index 552bfc726999..0b45aee2e299 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts @@ -18,8 +18,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts index 77b96ddf648e..b595622e7bee 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku1.dts @@ -30,8 +30,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts index 37e6e58f63b7..5a1c39318a6c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku6.dts @@ -17,8 +17,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts index 0e09604004d5..3ea4fdb40118 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel-sku7.dts @@ -17,8 +17,7 @@ compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touchscreen_pins>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts new file mode 100644 index 000000000000..4eb2a0d571af --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku0.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" + +/ { + model = "Google makomo sku0 board"; + chassis-type = "laptop"; + compatible = "google,makomo-sku0", "google,makomo", "mediatek,mt8183"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL14"; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts new file mode 100644 index 000000000000..6a733361e8ae --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-makomo-sku1.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi-fennel.dtsi" +#include "mt8183-kukui-audio-ts3a227e-rt1015p.dtsi" + +/ { + model = "Google makomo sku1 board"; + chassis-type = "laptop"; + compatible = "google,makomo-sku1", "google,makomo", "mediatek,mt8183"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_FENNEL14"; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts new file mode 100644 index 000000000000..8ce9568fee95 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" + +/ { + model = "Google pico board"; + chassis-type = "convertible"; + compatible = "google,pico-sku1", "google,pico", "mediatek,mt8183"; +}; + +&i2c_tunnel { + google,remote-bus = <0>; +}; + +&i2c2 { + i2c-scl-internal-delay-ns = <25000>; + + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts new file mode 100644 index 000000000000..a2e74b829320 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-pico6.dts @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-jacuzzi.dtsi" +#include "mt8183-kukui-audio-ts3a227e-max98357a.dtsi" + +/ { + model = "Google pico6 board"; + chassis-type = "convertible"; + compatible = "google,pico-sku2", "google,pico", "mediatek,mt8183"; + + bt_wakeup: bt-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins_wakeup>; + + wobt { + label = "Wake on BT"; + gpios = <&pio 42 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; +}; + +&i2c_tunnel { + google,remote-bus = <0>; +}; + +&i2c2 { + i2c-scl-internal-delay-ns = <25000>; + + trackpad@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_pins>; + + interrupts-extended = <&pio 7 IRQ_TYPE_LEVEL_LOW>; + + wakeup-source; + }; +}; + +&wifi_wakeup { + wowlan { + gpios = <&pio 113 GPIO_ACTIVE_LOW>; + }; +}; + +&wifi_pwrseq { + post-power-on-delay-ms = <50>; + + /* Toggle WIFI_ENABLE to reset the chip. */ + reset-gpios = <&pio 8 GPIO_ACTIVE_LOW>; +}; + +&wifi_pins_pwrseq { + pins-wifi-enable { + pinmux = <PINMUX_GPIO8__FUNC_GPIO8>; + }; +}; + +&mmc1_pins_default { + pins-cmd-dat { + drive-strength = <MTK_DRIVE_6mA>; + }; + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; + +&mmc1_pins_uhs { + pins-clk { + drive-strength = <MTK_DRIVE_6mA>; + }; +}; + +&mmc1 { + bt_reset: bt-reset { + compatible = "mediatek,mt7921s-bluetooth"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins_reset>; + reset-gpios = <&pio 120 GPIO_ACTIVE_LOW>; + }; +}; + +&pio { + bt_pins_wakeup: bt-pins-wakeup { + piins-bt-wakeup { + pinmux = <PINMUX_GPIO42__FUNC_GPIO42>; + input-enable; + }; + }; + + bt_pins_reset: bt-pins-reset { + pins-bt-reset { + pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; + output-high; + }; + }; +}; + +/delete-node/ &bluetooth; +/delete-node/ &bt_pins; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi index 820260348de9..7592e3b86037 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi @@ -149,7 +149,6 @@ reg = <0x58>; pinctrl-names = "default"; pinctrl-0 = <&anx7625_pins>; - panel_flags = <1>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; vdd10-supply = <&pp1200_mipibrdg>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts index fcce8ea1232e..1ecf39458d93 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts @@ -14,6 +14,24 @@ "google,kakadu", "mediatek,mt8183"; }; +&i2c0 { + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&panel { + compatible = "boe,tv105wum-nw0"; +}; + &sound { compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts index ebfabba72507..ba74109a4909 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -13,3 +13,21 @@ compatible = "google,kakadu-rev3", "google,kakadu-rev2", "google,kakadu", "mediatek,mt8183"; }; + +&i2c0 { + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&panel { + compatible = "boe,tv105wum-nw0"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi index a11adeb29b1f..b6a9830af269 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -63,19 +63,6 @@ &i2c0 { status = "okay"; - - touchscreen: touchscreen@10 { - compatible = "hid-over-i2c"; - reg = <0x10>; - pinctrl-names = "default"; - pinctrl-0 = <&open_touch>; - - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_EDGE_FALLING>; - - post-power-on-delay-ms = <10>; - hid-descr-addr = <0x0001>; - }; }; &mt6358_vcama2_reg { @@ -384,5 +371,5 @@ &panel { status = "okay"; - compatible = "boe,tv105wum-nw0"; + /* compatible will be set in board dts */ }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts new file mode 100644 index 000000000000..05361008e8ac --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku32.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" + +/ { + model = "Google katsu board"; + chassis-type = "tablet"; + compatible = "google,katsu-sku32", "google,katsu", "mediatek,mt8183"; +}; + +&i2c0 { + touchscreen1: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>; + vdd-supply = <&lcd_pp3300>; + }; +}; + +&panel { + compatible = "starry,2081101qfh032011-53g"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KATSU"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts new file mode 100644 index 000000000000..cf008ed82878 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-katsu-sku38.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2023 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-rt1015p.dtsi" + +/ { + model = "Google katsu sku38 board"; + chassis-type = "tablet"; + compatible = "google,katsu-sku38", "google,katsu", "mediatek,mt8183"; +}; + +&i2c0 { + touchscreen1: touchscreen@5d { + compatible = "goodix,gt7375p"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&pio 156 GPIO_ACTIVE_LOW>; + vdd-supply = <&lcd_pp3300>; + }; +}; + +&panel { + compatible = "starry,2081101qfh032011-53g"; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KATSU"; +}; + +&sound { + compatible = "mediatek,mt8183_mt6358_ts3a227_rt1015p"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi index 4864c39e53a4..306c95166f3f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi @@ -48,8 +48,7 @@ touchscreen: touchscreen@10 { compatible = "hid-over-i2c"; reg = <0x10>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 155 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&touch_default>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi index d5f41c6c9881..382e4c6d7191 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi @@ -54,8 +54,7 @@ pinctrl-names = "default"; pinctrl-0 = <&open_touch>; - interrupt-parent = <&pio>; - interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + interrupts-extended = <&pio 155 IRQ_TYPE_EDGE_FALLING>; post-power-on-delay-ms = <10>; hid-descr-addr = <0x0001>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi index 7881a27be029..5506de83f61d 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi @@ -846,6 +846,10 @@ }; }; +&pmic { + interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>; +}; + &pwm0 { status = "okay"; pinctrl-names = "default"; @@ -890,8 +894,7 @@ spi-max-frequency = <1000000>; pinctrl-names = "default"; pinctrl-0 = <&h1_int_od_l>; - interrupt-parent = <&pio>; - interrupts = <153 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&pio 153 IRQ_TYPE_EDGE_RISING>; }; }; @@ -918,8 +921,7 @@ compatible = "google,cros-ec-spi"; reg = <0>; spi-max-frequency = <3000000>; - interrupt-parent = <&pio>; - interrupts = <151 IRQ_TYPE_LEVEL_LOW>; + interrupts-extended = <&pio 151 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ec_ap_int_odl>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts index b5784a60c315..76449b4cf236 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts @@ -370,6 +370,10 @@ }; }; +&pmic { + interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>; +}; + &mfg { domain-supply = <&mt6358_vgpu_reg>; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 976dc968b3ca..920ee415ef5f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1183,22 +1183,10 @@ status = "disabled"; }; - svs: svs@1100b000 { - compatible = "mediatek,mt8183-svs"; - reg = <0 0x1100b000 0 0x1000>; - interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; - clocks = <&infracfg CLK_INFRA_THERM>; - clock-names = "main"; - nvmem-cells = <&svs_calibration>, - <&thermal_calibration>; - nvmem-cell-names = "svs-calibration-data", - "t-calibration-data"; - }; - thermal: thermal@1100b000 { #thermal-sensor-cells = <1>; compatible = "mediatek,mt8183-thermal"; - reg = <0 0x1100b000 0 0x1000>; + reg = <0 0x1100b000 0 0xc00>; clocks = <&infracfg CLK_INFRA_THERM>, <&infracfg CLK_INFRA_AUXADC>; clock-names = "therm", "auxadc"; @@ -1210,6 +1198,18 @@ nvmem-cell-names = "calibration-data"; }; + svs: svs@1100bc00 { + compatible = "mediatek,mt8183-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&thermal_calibration>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1660,7 +1660,7 @@ mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; }; - mdp3-rdma0@14001000 { + dma-controller0@14001000 { compatible = "mediatek,mt8183-mdp3-rdma"; reg = <0 0x14001000 0 0x1000>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>; @@ -1672,6 +1672,7 @@ iommus = <&iommu M4U_PORT_MDP_RDMA0>; mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST 0>, <&gce 21 CMDQ_THR_PRIO_LOWEST 0>; + #dma-cells = <1>; }; mdp3-rsz0@14003000 { @@ -1692,7 +1693,7 @@ clocks = <&mmsys CLK_MM_MDP_RSZ1>; }; - mdp3-wrot0@14005000 { + dma-controller@14005000 { compatible = "mediatek,mt8183-mdp3-wrot"; reg = <0 0x14005000 0 0x1000>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>; @@ -1701,6 +1702,7 @@ power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; clocks = <&mmsys CLK_MM_MDP_WROT0>; iommus = <&iommu M4U_PORT_MDP_WROT0>; + #dma-cells = <1>; }; mdp3-wdma@14006000 { @@ -1898,6 +1900,36 @@ #clock-cells = <1>; }; + vcodec_dec: video-codec@16020000 { + compatible = "mediatek,mt8183-vcodec-dec"; + reg = <0 0x16020000 0 0x1000>, /* VDEC_MISC */ + <0 0x16021000 0 0x800>, /* VDEC_VLD */ + <0 0x16021800 0 0x800>, /* VDEC_TOP */ + <0 0x16022000 0 0x1000>, /* VDEC_MC */ + <0 0x16023000 0 0x1000>, /* VDEC_AVCVLD */ + <0 0x16024000 0 0x1000>, /* VDEC_AVCMV */ + <0 0x16025000 0 0x1000>, /* VDEC_PP */ + <0 0x16026800 0 0x800>, /* VP8_VD */ + <0 0x16027000 0 0x800>, /* VP6_VD */ + <0 0x16027800 0 0x800>, /* VP8_VL */ + <0 0x16028400 0 0x400>; /* VP9_VD */ + reg-names = "misc", "ld", "top", "cm", "ad", "av", "pp", + "hwd", "hwq", "hwb", "hwg"; + interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_LOW>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_PPWRAP_EXT>; + mediatek,scp = <&scp>; + mediatek,vdecsys = <&vdecsys>; + power-domains = <&spm MT8183_POWER_DOMAIN_VDEC>; + clocks = <&vdecsys CLK_VDEC_VDEC>; + clock-names = "vdec"; + }; + larb1: larb@16010000 { compatible = "mediatek,mt8183-smi-larb"; reg = <0 0x16010000 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi index df0c04f2ba1d..2fec6fd1c1a7 100644 --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi @@ -22,7 +22,7 @@ aliases { ovl0 = &ovl0; - ovl_2l0 = &ovl_2l0; + ovl-2l0 = &ovl_2l0; rdma0 = &rdma0; rdma1 = &rdma1; }; @@ -1160,14 +1160,14 @@ status = "disabled"; }; - adsp_mailbox0: mailbox@10686000 { + adsp_mailbox0: mailbox@10686100 { compatible = "mediatek,mt8186-adsp-mbox"; #mbox-cells = <0>; reg = <0 0x10686100 0 0x1000>; interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH 0>; }; - adsp_mailbox1: mailbox@10687000 { + adsp_mailbox1: mailbox@10687100 { compatible = "mediatek,mt8186-adsp-mbox"; #mbox-cells = <0>; reg = <0 0x10687100 0 0x1000>; diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts new file mode 100644 index 000000000000..68a82b49f7a3 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts @@ -0,0 +1,387 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 MediaTek Inc. + */ +/dts-v1/; +#include "mt8188.dtsi" +#include "mt6359.dtsi" + +/ { + model = "MediaTek MT8188 evaluation board"; + compatible = "mediatek,mt8188-evb", "mediatek,mt8188"; + + aliases { + serial0 = &uart0; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + }; + + chosen: chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + scp_mem_reserved: memory@50000000 { + compatible = "shared-dma-pool"; + reg = <0 0x50000000 0 0x2900000>; + no-map; + }; + }; +}; + +&auxadc { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + clock-frequency = <400000>; + status = "okay"; +}; + +&mmc0 { + bus-width = <8>; + hs400-ds-delay = <0x1481b>; + max-frequency = <200000000>; + + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + supports-cqe; + cap-mmc-hw-reset; + no-sdio; + no-sd; + non-removable; + + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_default_pins>; + pinctrl-1 = <&mmc0_uhs_pins>; + + status = "okay"; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&nor_flash { + pinctrl-names = "default"; + pinctrl-0 = <&nor_pins_default>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + }; +}; + +&pio { + adsp_uart_pins: adsp-uart-pins { + pins-tx-rx { + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>, + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>; + }; + }; + + i2c0_pins: i2c0-pins { + pins-bus { + pinmux = <PINMUX_GPIO56__FUNC_B1_SDA0>, + <PINMUX_GPIO55__FUNC_B1_SCL0>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c1_pins: i2c1-pins { + pins-bus { + pinmux = <PINMUX_GPIO58__FUNC_B1_SDA1>, + <PINMUX_GPIO57__FUNC_B1_SCL1>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c2_pins: i2c2-pins { + pins-bus { + pinmux = <PINMUX_GPIO60__FUNC_B1_SDA2>, + <PINMUX_GPIO59__FUNC_B1_SCL2>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c3_pins: i2c3-pins { + pins-bus { + pinmux = <PINMUX_GPIO62__FUNC_B1_SDA3>, + <PINMUX_GPIO61__FUNC_B1_SCL3>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c4_pins: i2c4-pins { + pins-bus { + pinmux = <PINMUX_GPIO64__FUNC_B1_SDA4>, + <PINMUX_GPIO63__FUNC_B1_SCL4>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c5_pins: i2c5-pins { + pins-bus { + pinmux = <PINMUX_GPIO66__FUNC_B1_SDA5>, + <PINMUX_GPIO65__FUNC_B1_SCL5>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + i2c6_pins: i2c6-pins { + pins-bus { + pinmux = <PINMUX_GPIO68__FUNC_B1_SDA6>, + <PINMUX_GPIO67__FUNC_B1_SCL6>; + bias-pull-up = <MTK_PULL_SET_RSEL_011>; + }; + }; + + mmc0_default_pins: mmc0-default-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>; + drive-strength = <6>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <6>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_uhs_pins: mmc0-uhs-pins { + pins-cmd-dat { + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>, + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>, + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>, + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>, + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>, + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>, + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>, + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>, + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>; + input-enable; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins-clk-ds { + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>, + <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>; + drive-strength = <8>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins-rst { + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>; + drive-strength = <8>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + nor_pins_default: nor-pins { + pins-io-ck { + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>, + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>, + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>; + bias-pull-down; + }; + + pins-io-cs { + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>, + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>, + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>; + bias-pull-up; + }; + }; + + spi0_pins: spi0-pins { + pins-spi { + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>, + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>, + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>, + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>; + bias-disable; + }; + }; + + spi1_pins: spi1-pins { + pins-spi { + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>, + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>, + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>, + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>; + bias-disable; + }; + }; + + spi2_pins: spi2-pins { + pins-spi { + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>, + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>, + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>, + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>; + bias-disable; + }; + }; + + uart0_pins: uart0-pins { + pins-rx-tx { + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>, + <PINMUX_GPIO32__FUNC_I1_URXD0>; + bias-pull-up; + }; + }; +}; + +&pmic { + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&scp { + memory-region = <&scp_mem_reserved>; + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&xhci2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi new file mode 100644 index 000000000000..b4315c9214dc --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi @@ -0,0 +1,956 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2023 MediaTek Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/clock/mediatek,mt8188-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h> +#include <dt-bindings/power/mediatek,mt8188-power.h> + +/ { + compatible = "mediatek,mt8188"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x000>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x200>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x300>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x400>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x500>; + enable-method = "psci"; + clock-frequency = <2000000000>; + capacity-dmips-mhz = <282>; + cpu-idle-states = <&cpu_off_l &cluster_off_l>; + i-cache-size = <32768>; + i-cache-line-size = <64>; + i-cache-sets = <128>; + d-cache-size = <32768>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&l2_0>; + #cooling-cells = <2>; + }; + + cpu6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x600>; + enable-method = "psci"; + clock-frequency = <2600000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a78"; + reg = <0x700>; + enable-method = "psci"; + clock-frequency = <2600000000>; + capacity-dmips-mhz = <1024>; + cpu-idle-states = <&cpu_off_b &cluster_off_b>; + i-cache-size = <65536>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <65536>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&l2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + + core2 { + cpu = <&cpu2>; + }; + + core3 { + cpu = <&cpu3>; + }; + + core4 { + cpu = <&cpu4>; + }; + + core5 { + cpu = <&cpu5>; + }; + + core6 { + cpu = <&cpu6>; + }; + + core7 { + cpu = <&cpu7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + cpu_off_l: cpu-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010000>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <95>; + min-residency-us = <580>; + }; + + cpu_off_b: cpu-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x00010000>; + local-timer-stop; + entry-latency-us = <45>; + exit-latency-us = <140>; + min-residency-us = <740>; + }; + + cluster_off_l: cluster-off-l { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010010>; + local-timer-stop; + entry-latency-us = <55>; + exit-latency-us = <155>; + min-residency-us = <840>; + }; + + cluster_off_b: cluster-off-b { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x01010010>; + local-timer-stop; + entry-latency-us = <50>; + exit-latency-us = <200>; + min-residency-us = <1000>; + }; + }; + + l2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <131072>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_0>; + cache-unified; + }; + + l2_1: l2-cache1 { + compatible = "cache"; + cache-level = <2>; + cache-size = <262144>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&l3_0>; + cache-unified; + }; + + l3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-size = <2097152>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-unified; + }; + }; + + clk13m: oscillator-13m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "clk13m"; + }; + + clk26m: oscillator-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + clk32k: oscillator-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + pmu-a55 { + compatible = "arm,cortex-a55-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>; + }; + + pmu-a78 { + compatible = "arm,cortex-a78-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>; + clock-frequency = <13000000>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + #redistributor-regions = <1>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, + <0 0x0c040000 0 0x200000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>; + }; + + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu6 &cpu7>; + }; + }; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8188-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg_ao: syscon@10001000 { + compatible = "mediatek,mt8188-infracfg-ao", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt8188-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8188-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11c00000 0 0x1000>, + <0 0x11e10000 0 0x1000>, + <0 0x11e20000 0 0x1000>, + <0 0x11ea0000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg_rm", "iocfg_lt", + "iocfg_lm", "iocfg_rt", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 176>; + interrupt-controller; + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + }; + + watchdog: watchdog@10007000 { + compatible = "mediatek,mt8188-wdt"; + reg = <0 0x10007000 0 0x100>; + mediatek,disable-extrst; + #reset-cells = <1>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8188-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + systimer: timer@10017000 { + compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer"; + reg = <0 0x10017000 0 0x1000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk13m>; + }; + + pwrap: pwrap@10024000 { + compatible = "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap", "syscon"; + reg = <0 0x10024000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_PMIC_AP>, + <&infracfg_ao CLK_INFRA_AO_PMIC_TMR>; + clock-names = "spi", "wrap"; + }; + + scp: scp@10500000 { + compatible = "mediatek,mt8188-scp"; + reg = <0 0x10500000 0 0x100000>, + <0 0x10720000 0 0xe0000>; + reg-names = "sram", "cfg"; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>; + }; + + adsp_audio26m: clock-controller@10b91100 { + compatible = "mediatek,mt8188-adsp-audio26m"; + reg = <0 0x10b91100 0 0x100>; + #clock-cells = <1>; + }; + + uart0: serial@11001100 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001100 0 0x100>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11001200 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001200 0 0x100>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11001300 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001300 0 0x100>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart3: serial@11001400 { + compatible = "mediatek,mt8188-uart", "mediatek,mt6577-uart"; + reg = <0 0x11001400 0 0x100>; + interrupts = <GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&clk26m>, <&infracfg_ao CLK_INFRA_AO_UART3>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + auxadc: adc@11002000 { + compatible = "mediatek,mt8188-auxadc", "mediatek,mt8173-auxadc"; + reg = <0 0x11002000 0 0x1000>; + clocks = <&infracfg_ao CLK_INFRA_AO_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + pericfg_ao: syscon@11003000 { + compatible = "mediatek,mt8188-pericfg-ao", "syscon"; + reg = <0 0x11003000 0 0x1000>; + #clock-cells = <1>; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8188-spi-ipm", "mediatek,spi-ipm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_UNIVPLL_D6_D2>, + <&topckgen CLK_TOP_SPI>, + <&infracfg_ao CLK_INFRA_AO_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + xhci1: usb@11200000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port1 PHY_TYPE_USB2>, + <&u3port1 PHY_TYPE_USB3>; + assigned-clocks = <&topckgen CLK_TOP_USB_TOP>, + <&topckgen CLK_TOP_SSUSB_XHCI>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + mediatek,syscon-wakeup = <&pericfg 0x468 2>; + wakeup-source; + status = "disabled"; + }; + + mmc0: mmc@11230000 { + compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11230000 0 0x10000>, + <0 0x11f50000 0 0x1000>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC50_0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0>, + <&infracfg_ao CLK_INFRA_AO_MSDC0_SRC>, + <&infracfg_ao CLK_INFRA_AO_RG_AES_MSDCFDE_CK_0P>; + clock-names = "source", "hclk", "source_cg", "crypto_clk"; + status = "disabled"; + }; + + mmc1: mmc@11240000 { + compatible = "mediatek,mt8188-mmc", "mediatek,mt8183-mmc"; + reg = <0 0x11240000 0 0x1000>, + <0 0x11eb0000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&topckgen CLK_TOP_MSDC30_1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1>, + <&infracfg_ao CLK_INFRA_AO_MSDC1_SRC>; + clock-names = "source", "hclk", "source_cg"; + assigned-clocks = <&topckgen CLK_TOP_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + status = "disabled"; + }; + + i2c0: i2c@11280000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11280000 0 0x1000>, + <0 0x10220080 0 0x80>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C0>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@11281000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11281000 0 0x1000>, + <0 0x10220180 0 0x80>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C2>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@11282000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11282000 0 0x1000>, + <0 0x10220280 0 0x80>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_c CLK_IMP_IIC_WRAP_C_AP_CLOCK_I2C3>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_c: clock-controller@11283000 { + compatible = "mediatek,mt8188-imp-iic-wrap-c"; + reg = <0 0x11283000 0 0x1000>; + #clock-cells = <1>; + }; + + xhci2: usb@112a0000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x112a0000 0 0x1000>, + <0 0x112a3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port2 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_3P>, + <&topckgen CLK_TOP_USB_TOP_3P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_3P_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_P3_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_3P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + status = "disabled"; + }; + + xhci0: usb@112b0000 { + compatible = "mediatek,mt8188-xhci", "mediatek,mtk-xhci"; + reg = <0 0x112b0000 0 0x1000>, + <0 0x112b3e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH 0>; + phys = <&u2port0 PHY_TYPE_USB2>; + assigned-clocks = <&topckgen CLK_TOP_SSUSB_XHCI_2P>, + <&topckgen CLK_TOP_USB_TOP_2P>; + assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL_D5_D4>, + <&topckgen CLK_TOP_UNIVPLL_D5_D4>; + clocks = <&pericfg_ao CLK_PERI_AO_SSUSB_2P_BUS>, + <&topckgen CLK_TOP_SSUSB_TOP_P2_REF>, + <&pericfg_ao CLK_PERI_AO_SSUSB_2P_XHCI>; + clock-names = "sys_ck", "ref_ck", "mcu_ck"; + mediatek,syscon-wakeup = <&pericfg 0x460 2>; + wakeup-source; + status = "disabled"; + }; + + nor_flash: spi@1132c000 { + compatible = "mediatek,mt8188-nor", "mediatek,mt8186-nor"; + reg = <0 0x1132c000 0 0x1000>; + clocks = <&topckgen CLK_TOP_SPINOR>, + <&pericfg_ao CLK_PERI_AO_FLASHIFLASHCK>, + <&pericfg_ao CLK_PERI_AO_FLASHIF_BUS>; + clock-names = "spi", "sf", "axi"; + assigned-clocks = <&topckgen CLK_TOP_SPINOR>; + interrupts = <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH 0>; + status = "disabled"; + }; + + i2c1: i2c@11e00000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11e00000 0 0x1000>, + <0 0x10220100 0 0x80>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C1>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@11e01000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11e01000 0 0x1000>, + <0 0x10220380 0 0x80>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_AP_CLOCK_I2C4>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_w: clock-controller@11e02000 { + compatible = "mediatek,mt8188-imp-iic-wrap-w"; + reg = <0 0x11e02000 0 0x1000>; + #clock-cells = <1>; + }; + + u3phy0: t-phy@11e30000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e30000 0x1000>; + status = "disabled"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P2_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + u3phy1: t-phy@11e40000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e40000 0x1000>; + status = "disabled"; + + u2port1: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + + u3port1: usb-phy@700 { + reg = <0x700 0x700>; + clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>, + <&clk26m>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + status = "disabled"; + }; + }; + + u3phy2: t-phy@11e80000 { + compatible = "mediatek,mt8188-tphy", "mediatek,generic-tphy-v3"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x11e80000 0x1000>; + status = "disabled"; + + u2port2: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&topckgen CLK_TOP_SSUSB_PHY_P3_REF>, + <&apmixedsys CLK_APMIXED_PLL_SSUSB26M_EN>; + clock-names = "ref", "da_ref"; + #phy-cells = <1>; + }; + }; + + i2c5: i2c@11ec0000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11ec0000 0 0x1000>, + <0 0x10220480 0 0x80>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C5>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@11ec1000 { + compatible = "mediatek,mt8188-i2c"; + reg = <0 0x11ec1000 0 0x1000>, + <0 0x10220600 0 0x80>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>; + clock-div = <1>; + clocks = <&imp_iic_wrap_en CLK_IMP_IIC_WRAP_EN_AP_CLOCK_I2C6>, + <&infracfg_ao CLK_INFRA_AO_APDMA_BCLK>; + clock-names = "main", "dma"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + imp_iic_wrap_en: clock-controller@11ec2000 { + compatible = "mediatek,mt8188-imp-iic-wrap-en"; + reg = <0 0x11ec2000 0 0x1000>; + #clock-cells = <1>; + }; + + mfgcfg: clock-controller@13fbf000 { + compatible = "mediatek,mt8188-mfgcfg"; + reg = <0 0x13fbf000 0 0x1000>; + #clock-cells = <1>; + }; + + vppsys0: clock-controller@14000000 { + compatible = "mediatek,mt8188-vppsys0"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys: clock-controller@14e00000 { + compatible = "mediatek,mt8188-wpesys"; + reg = <0 0x14e00000 0 0x1000>; + #clock-cells = <1>; + }; + + wpesys_vpp0: clock-controller@14e02000 { + compatible = "mediatek,mt8188-wpesys-vpp0"; + reg = <0 0x14e02000 0 0x1000>; + #clock-cells = <1>; + }; + + vppsys1: clock-controller@14f00000 { + compatible = "mediatek,mt8188-vppsys1"; + reg = <0 0x14f00000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8188-imgsys"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_top: clock-controller@15110000 { + compatible = "mediatek,mt8188-imgsys1-dip-top"; + reg = <0 0x15110000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys1_dip_nr: clock-controller@15130000 { + compatible = "mediatek,mt8188-imgsys1-dip-nr"; + reg = <0 0x15130000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe1: clock-controller@15220000 { + compatible = "mediatek,mt8188-imgsys-wpe1"; + reg = <0 0x15220000 0 0x1000>; + #clock-cells = <1>; + }; + + ipesys: clock-controller@15330000 { + compatible = "mediatek,mt8188-ipesys"; + reg = <0 0x15330000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe2: clock-controller@15520000 { + compatible = "mediatek,mt8188-imgsys-wpe2"; + reg = <0 0x15520000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys_wpe3: clock-controller@15620000 { + compatible = "mediatek,mt8188-imgsys-wpe3"; + reg = <0 0x15620000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: clock-controller@16000000 { + compatible = "mediatek,mt8188-camsys"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawa: clock-controller@1604f000 { + compatible = "mediatek,mt8188-camsys-rawa"; + reg = <0 0x1604f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuva: clock-controller@1606f000 { + compatible = "mediatek,mt8188-camsys-yuva"; + reg = <0 0x1606f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_rawb: clock-controller@1608f000 { + compatible = "mediatek,mt8188-camsys-rawb"; + reg = <0 0x1608f000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys_yuvb: clock-controller@160af000 { + compatible = "mediatek,mt8188-camsys-yuvb"; + reg = <0 0x160af000 0 0x1000>; + #clock-cells = <1>; + }; + + ccusys: clock-controller@17200000 { + compatible = "mediatek,mt8188-ccusys"; + reg = <0 0x17200000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys_soc: clock-controller@1800f000 { + compatible = "mediatek,mt8188-vdecsys-soc"; + reg = <0 0x1800f000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@1802f000 { + compatible = "mediatek,mt8188-vdecsys"; + reg = <0 0x1802f000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@1a000000 { + compatible = "mediatek,mt8188-vencsys"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index 69f4cded5dbb..6dd32dbfb832 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -14,6 +14,8 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/power/mt8192-power.h> #include <dt-bindings/reset/mt8192-resets.h> +#include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h> / { compatible = "mediatek,mt8192"; @@ -72,6 +74,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu1: cpu@100 { @@ -90,6 +93,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu2: cpu@200 { @@ -108,6 +112,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu3: cpu@300 { @@ -126,6 +131,7 @@ next-level-cache = <&l2_0>; performance-domains = <&performance 0>; capacity-dmips-mhz = <427>; + #cooling-cells = <2>; }; cpu4: cpu@400 { @@ -144,6 +150,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu5: cpu@500 { @@ -162,6 +169,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu6: cpu@600 { @@ -180,6 +188,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu7: cpu@700 { @@ -198,6 +207,7 @@ next-level-cache = <&l2_1>; performance-domains = <&performance 1>; capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; cpu-map { @@ -788,6 +798,29 @@ status = "disabled"; }; + lvts_ap: thermal-sensor@1100b000 { + compatible = "mediatek,mt8192-lvts-ap"; + reg = <0 0x1100b000 0 0xc00>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + resets = <&infracfg MT8192_INFRA_RST0_THERM_CTRL_SWRST>; + nvmem-cells = <&lvts_e_data1>; + nvmem-cell-names = "lvts-calib-data-1"; + #thermal-sensor-cells = <1>; + }; + + svs: svs@1100bc00 { + compatible = "mediatek,mt8192-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, <&lvts_e_data1>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + resets = <&infracfg MT8192_INFRA_RST3_THERM_CTRL_PTP_SWRST>; + reset-names = "svs_rst"; + }; + pwm0: pwm@1100e000 { compatible = "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1114,6 +1147,17 @@ status = "disabled"; }; + lvts_mcu: thermal-sensor@11278000 { + compatible = "mediatek,mt8192-lvts-mcu"; + reg = <0 0x11278000 0 0x1000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + resets = <&infracfg MT8192_INFRA_RST4_THERM_CTRL_MCU_SWRST>; + nvmem-cells = <&lvts_e_data1>; + nvmem-cell-names = "lvts-calib-data-1"; + #thermal-sensor-cells = <1>; + }; + efuse: efuse@11c10000 { compatible = "mediatek,mt8192-efuse", "mediatek,efuse"; reg = <0 0x11c10000 0 0x1000>; @@ -1899,4 +1943,426 @@ power-domains = <&spm MT8192_POWER_DOMAIN_MDP>; }; }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU0>; + + trips { + cpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU1>; + + trips { + cpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU2>; + + trips { + cpu2_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_LITTLE_CPU3>; + + trips { + cpu3_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU0>; + + trips { + cpu4_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU1>; + + trips { + cpu5_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU2>; + + trips { + cpu6_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_mcu MT8192_MCU_BIG_CPU3>; + + trips { + cpu7_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + vpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_VPU0>; + + trips { + vpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + vpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_VPU1>; + + trips { + vpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + vpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_GPU0>; + + trips { + gpu0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_GPU1>; + + trips { + gpu1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + infra-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_INFRA>; + + trips { + infra_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + infra_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cam-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_CAM>; + + trips { + cam_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cam_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + md0-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_MD0>; + + trips { + md0_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md0_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + md1-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_MD1>; + + trips { + md1_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md1_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + md2-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&lvts_ap MT8192_AP_MD2>; + + trips { + md2_alert: trip-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + md2_crit: trip-crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi index 5a7cab489ff3..bbdcd441c049 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi @@ -127,6 +127,77 @@ regulator-boot-on; }; + /* Murata NCP03WF104F05RL */ + tboard_thermistor1: thermal-sensor-t1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-10000) 1553 + (-5000) 1485 + 0 1406 + 5000 1317 + 10000 1219 + 15000 1115 + 20000 1007 + 25000 900 + 30000 796 + 35000 697 + 40000 605 + 45000 523 + 50000 449 + 55000 384 + 60000 327 + 65000 279 + 70000 237 + 75000 202 + 80000 172 + 85000 147 + 90000 125 + 95000 107 + 100000 92 + 105000 79 + 110000 68 + 115000 59 + 120000 51 + 125000 44>; + }; + + tboard_thermistor2: thermal-sensor-t2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-10000) 1553 + (-5000) 1485 + 0 1406 + 5000 1317 + 10000 1219 + 15000 1115 + 20000 1007 + 25000 900 + 30000 796 + 35000 697 + 40000 605 + 45000 523 + 50000 449 + 55000 384 + 60000 327 + 65000 279 + 70000 237 + 75000 202 + 80000 172 + 85000 147 + 90000 125 + 95000 107 + 100000 92 + 105000 79 + 110000 68 + 115000 59 + 120000 51 + 125000 44>; + }; + usb_vbus: regulator-5v0-usb-vbus { compatible = "regulator-fixed"; regulator-name = "usb-vbus"; @@ -189,6 +260,10 @@ memory-region = <&afe_mem>; }; +&auxadc { + status = "okay"; +}; + &dp_intf0 { status = "okay"; @@ -401,6 +476,14 @@ }; }; +&mfg0 { + domain-supply = <&mt6315_7_vbuck1>; +}; + +&mfg1 { + domain-supply = <&mt6359_vsram_others_ldo_reg>; +}; + &mmc0 { status = "okay"; @@ -471,7 +554,6 @@ /* for GPU SRAM */ &mt6359_vsram_others_ldo_reg { - regulator-always-on; regulator-min-microvolt = <750000>; regulator-max-microvolt = <750000>; }; @@ -1154,7 +1236,36 @@ regulator-enable-ramp-delay = <256>; regulator-ramp-delay = <6250>; regulator-allowed-modes = <0 1 2>; - regulator-always-on; + }; + }; + }; +}; + +&thermal_zones { + soc-area-thermal { + polling-delay = <1000>; + polling-delay-passive = <250>; + thermal-sensors = <&tboard_thermistor1>; + + trips { + trip-crit { + temperature = <84000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + pmic-area-thermal { + polling-delay = <1000>; + polling-delay-passive = <0>; + thermal-sensors = <&tboard_thermistor2>; + + trips { + trip-crit { + temperature = <84000>; + hysteresis = <1000>; + type = "critical"; }; }; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index e0ac2e9f5b72..b9101662ce40 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -538,7 +538,7 @@ #size-cells = <0>; #power-domain-cells = <1>; - power-domain@MT8195_POWER_DOMAIN_MFG1 { + mfg1: power-domain@MT8195_POWER_DOMAIN_MFG1 { reg = <MT8195_POWER_DOMAIN_MFG1>; clocks = <&apmixedsys CLK_APMIXED_MFGPLL>, <&topckgen CLK_TOP_MFG_CORE_TMP>; @@ -1119,7 +1119,7 @@ lvts_ap: thermal-sensor@1100b000 { compatible = "mediatek,mt8195-lvts-ap"; - reg = <0 0x1100b000 0 0x1000>; + reg = <0 0x1100b000 0 0xc00>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; resets = <&infracfg_ao MT8195_INFRA_RST0_THERM_CTRL_SWRST>; @@ -1128,6 +1128,18 @@ #thermal-sensor-cells = <1>; }; + svs: svs@1100bc00 { + compatible = "mediatek,mt8195-svs"; + reg = <0 0x1100bc00 0 0x400>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg_ao CLK_INFRA_AO_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calib_data &lvts_efuse_data1>; + nvmem-cell-names = "svs-calibration-data", "t-calibration-data"; + resets = <&infracfg_ao MT8195_INFRA_RST3_THERM_CTRL_PTP_SWRST>; + reset-names = "svs_rst"; + }; + disp_pwm0: pwm@1100e000 { compatible = "mediatek,mt8195-disp-pwm", "mediatek,mt8183-disp-pwm"; reg = <0 0x1100e000 0 0x1000>; @@ -1686,6 +1698,9 @@ lvts_efuse_data2: lvts2-calib@1d0 { reg = <0x1d0 0x38>; }; + svs_calib_data: svs-calib@580 { + reg = <0x580 0x64>; + }; }; u3phy2: t-phy@11c40000 { @@ -1718,6 +1733,26 @@ }; }; + mipi_tx0: dsi-phy@11c80000 { + compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx"; + reg = <0 0x11c80000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx0_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + mipi_tx1: dsi-phy@11c90000 { + compatible = "mediatek,mt8195-mipi-tx", "mediatek,mt8183-mipi-tx"; + reg = <0 0x11c90000 0 0x1000>; + clocks = <&clk26m>; + clock-output-names = "mipi_tx1_pll"; + #clock-cells = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + i2c5: i2c@11d00000 { compatible = "mediatek,mt8195-i2c", "mediatek,mt8192-i2c"; @@ -1965,6 +2000,115 @@ #clock-cells = <1>; }; + dma-controller@14001000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14001000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x1000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP0_MDP_RDMA_FRAME_DONE>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + iommus = <&iommu_vpp M4U_PORT_L4_MDP_RDMA>; + clocks = <&vppsys0 CLK_VPP0_MDP_RDMA>; + mboxes = <&gce1 12 CMDQ_THR_PRIO_1>, + <&gce1 13 CMDQ_THR_PRIO_1>, + <&gce1 14 CMDQ_THR_PRIO_1>, + <&gce1 21 CMDQ_THR_PRIO_1>, + <&gce1 22 CMDQ_THR_PRIO_1>; + #dma-cells = <1>; + }; + + display@14002000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14002000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x2000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_FG>; + }; + + display@14003000 { + compatible = "mediatek,mt8195-mdp3-stitch"; + reg = <0 0x14003000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x3000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_STITCH>; + }; + + display@14004000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14004000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x4000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_HDR>; + }; + + display@14005000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14005000 0 0x1000>; + interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x5000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + display@14006000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14006000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_RSZ_IN_RSZ_SOF>, + <CMDQ_EVENT_VPP0_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys0 CLK_VPP0_MDP_RSZ>; + }; + + display@14007000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14007000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x7000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TDSHP>; + }; + + display@14008000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14008000 0 0x1000>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x8000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + display@14009000 { + compatible = "mediatek,mt8195-mdp3-ovl"; + reg = <0 0x14009000 0 0x1000>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0x9000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_OVL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + iommus = <&iommu_vpp M4U_PORT_L4_MDP_OVL>; + }; + + display@1400a000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x1400a000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xa000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_PADDING>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + }; + + display@1400b000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0 0x1400b000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xb000 0x1000>; + clocks = <&vppsys0 CLK_VPP0_MDP_TCC>; + }; + + dma-controller@1400c000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x1400c000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_1400XXXX 0xc000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP0_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP0_MDP_WROT_VIDO_WDONE>; + clocks = <&vppsys0 CLK_VPP0_MDP_WROT>; + iommus = <&iommu_vpp M4U_PORT_L4_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS0>; + #dma-cells = <1>; + }; + mutex@1400f000 { compatible = "mediatek,mt8195-vpp-mutex"; reg = <0 0x1400f000 0 0x1000>; @@ -2112,6 +2256,289 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; }; + display@14f06000 { + compatible = "mediatek,mt8195-mdp3-split"; + reg = <0 0x14f06000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x6000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_VPP_SPLIT>, + <&vppsys1 CLK_VPP1_HDMI_META>, + <&vppsys1 CLK_VPP1_VPP_SPLIT_HDMI>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f07000 { + compatible = "mediatek,mt8195-mdp3-tcc"; + reg = <0 0x14f07000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x7000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TCC>; + }; + + dma-controller@14f08000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14f08000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x8000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP1_SVPP1_MDP_RDMA_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RDMA>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_RDMA>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f09000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14f09000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0x9000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP1_SVPP2_MDP_RDMA_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RDMA>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_RDMA>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f0a000 { + compatible = "mediatek,mt8195-mdp3-rdma"; + reg = <0 0x14f0a000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xa000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_SOF>, + <CMDQ_EVENT_VPP1_SVPP3_MDP_RDMA_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RDMA>; + iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_RDMA>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + display@14f0b000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14f0b000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xb000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_FG>; + }; + + display@14f0c000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14f0c000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xc000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_FG>; + }; + + display@14f0d000 { + compatible = "mediatek,mt8195-mdp3-fg"; + reg = <0 0x14f0d000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xd000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_FG>; + }; + + display@14f0e000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14f0e000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xe000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_HDR>; + }; + + display@14f0f000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14f0f000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f0XXXX 0xf000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_HDR>; + }; + + display@14f10000 { + compatible = "mediatek,mt8195-mdp3-hdr"; + reg = <0 0x14f10000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_HDR>; + }; + + display@14f11000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14f11000 0 0x1000>; + interrupts = <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x1000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f12000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14f12000 0 0x1000>; + interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x2000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f13000 { + compatible = "mediatek,mt8195-mdp3-aal"; + reg = <0 0x14f13000 0 0x1000>; + interrupts = <GIC_SPI 619 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x3000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_AAL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f14000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14f14000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x4000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_SOF>, + <CMDQ_EVENT_VPP1_SVPP1_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_RSZ>; + }; + + display@14f15000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14f15000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_SOF>, + <CMDQ_EVENT_VPP1_SVPP2_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_RSZ>; + }; + + display@14f16000 { + compatible = "mediatek,mt8195-mdp3-rsz", "mediatek,mt8183-mdp3-rsz"; + reg = <0 0x14f16000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x6000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_SOF>, + <CMDQ_EVENT_VPP1_SVPP3_MDP_RSZ_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_RSZ>; + }; + + display@14f17000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14f17000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x7000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_TDSHP>; + }; + + display@14f18000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14f18000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x8000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_TDSHP>; + }; + + display@14f19000 { + compatible = "mediatek,mt8195-mdp3-tdshp"; + reg = <0 0x14f19000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0x9000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_TDSHP>; + }; + + display@14f1a000 { + compatible = "mediatek,mt8195-mdp3-merge"; + reg = <0 0x14f1a000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xa000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_MERGE>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1b000 { + compatible = "mediatek,mt8195-mdp3-merge"; + reg = <0 0x14f1b000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xb000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_MERGE>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1c000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14f1c000 0 0x1000>; + interrupts = <GIC_SPI 628 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xc000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1d000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14f1d000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xd000 0x1000>; + interrupts = <GIC_SPI 629 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1e000 { + compatible = "mediatek,mt8195-mdp3-color"; + reg = <0 0x14f1e000 0 0x1000>; + interrupts = <GIC_SPI 630 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xe000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_COLOR>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f1f000 { + compatible = "mediatek,mt8195-mdp3-ovl"; + reg = <0 0x14f1f000 0 0x1000>; + interrupts = <GIC_SPI 631 IRQ_TYPE_LEVEL_HIGH 0>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f1XXXX 0xf000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_OVL>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_OVL>; + }; + + display@14f20000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x14f20000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_VPP_PAD>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f21000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x14f21000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x1000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_VPP_PAD>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + display@14f22000 { + compatible = "mediatek,mt8195-mdp3-padding"; + reg = <0 0x14f22000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x2000 0x1000>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_VPP_PAD>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + }; + + dma-controller@14f23000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14f23000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x3000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP1_SVPP1_MDP_WROT_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP1_MDP_WROT>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP1_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f24000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14f24000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x4000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP1_SVPP2_MDP_WROT_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP2_MDP_WROT>; + iommus = <&iommu_vdo M4U_PORT_L5_SVPP2_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + + dma-controller@14f25000 { + compatible = "mediatek,mt8195-mdp3-wrot", "mediatek,mt8183-mdp3-wrot"; + reg = <0 0x14f25000 0 0x1000>; + mediatek,gce-client-reg = <&gce1 SUBSYS_14f2XXXX 0x5000 0x1000>; + mediatek,gce-events = <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_SOF>, + <CMDQ_EVENT_VPP1_SVPP3_MDP_WROT_FRAME_DONE>; + clocks = <&vppsys1 CLK_VPP1_SVPP3_MDP_WROT>; + iommus = <&iommu_vpp M4U_PORT_L6_SVPP3_MDP_WROT>; + power-domains = <&spm MT8195_POWER_DOMAIN_VPPSYS1>; + #dma-cells = <1>; + }; + imgsys: clock-controller@15000000 { compatible = "mediatek,mt8195-imgsys"; reg = <0 0x15000000 0 0x1000>; @@ -2741,6 +3168,20 @@ mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x7000 0x1000>; }; + dsi0: dsi@1c008000 { + compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi"; + reg = <0 0x1c008000 0 0x1000>; + interrupts = <GIC_SPI 644 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSI0>, + <&vdosys0 CLK_VDO0_DSI0_DSI>, + <&mipi_tx0>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx0>; + phy-names = "dphy"; + status = "disabled"; + }; + dsc0: dsc@1c009000 { compatible = "mediatek,mt8195-disp-dsc"; reg = <0 0x1c009000 0 0x1000>; @@ -2750,6 +3191,20 @@ mediatek,gce-client-reg = <&gce0 SUBSYS_1c00XXXX 0x9000 0x1000>; }; + dsi1: dsi@1c012000 { + compatible = "mediatek,mt8195-dsi", "mediatek,mt8183-dsi"; + reg = <0 0x1c012000 0 0x1000>; + interrupts = <GIC_SPI 654 IRQ_TYPE_LEVEL_HIGH 0>; + power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS0>; + clocks = <&vdosys0 CLK_VDO0_DSI1>, + <&vdosys0 CLK_VDO0_DSI1_DSI>, + <&mipi_tx1>; + clock-names = "engine", "digital", "hs"; + phys = <&mipi_tx1>; + phy-names = "dphy"; + status = "disabled"; + }; + merge0: merge@1c014000 { compatible = "mediatek,mt8195-disp-merge"; reg = <0 0x1c014000 0 0x1000>; @@ -2873,7 +3328,7 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; }; - vdo1_rdma0: rdma@1c104000 { + vdo1_rdma0: dma-controller@1c104000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c104000 0 0x1000>; interrupts = <GIC_SPI 495 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2881,9 +3336,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA0>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x4000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma1: rdma@1c105000 { + vdo1_rdma1: dma-controller@1c105000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c105000 0 0x1000>; interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2891,9 +3347,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA1>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x5000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma2: rdma@1c106000 { + vdo1_rdma2: dma-controller@1c106000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c106000 0 0x1000>; interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2901,9 +3358,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA2>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x6000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma3: rdma@1c107000 { + vdo1_rdma3: dma-controller@1c107000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c107000 0 0x1000>; interrupts = <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2911,9 +3369,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA3>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x7000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma4: rdma@1c108000 { + vdo1_rdma4: dma-controller@1c108000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c108000 0 0x1000>; interrupts = <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2921,9 +3380,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA4>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x8000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma5: rdma@1c109000 { + vdo1_rdma5: dma-controller@1c109000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c109000 0 0x1000>; interrupts = <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2931,9 +3391,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA5>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0x9000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma6: rdma@1c10a000 { + vdo1_rdma6: dma-controller@1c10a000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c10a000 0 0x1000>; interrupts = <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2941,9 +3402,10 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vdo M4U_PORT_L2_MDP_RDMA6>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xa000 0x1000>; + #dma-cells = <1>; }; - vdo1_rdma7: rdma@1c10b000 { + vdo1_rdma7: dma-controller@1c10b000 { compatible = "mediatek,mt8195-vdo1-rdma"; reg = <0 0x1c10b000 0 0x1000>; interrupts = <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH 0>; @@ -2951,6 +3413,7 @@ power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>; iommus = <&iommu_vpp M4U_PORT_L3_MDP_RDMA7>; mediatek,gce-client-reg = <&gce0 SUBSYS_1c10XXXX 0xb000 0x1000>; + #dma-cells = <1>; }; merge1: vpp-merge@1c10c000 { diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts index 00ac59a873e8..7fc515a07c65 100644 --- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts @@ -210,8 +210,7 @@ touchscreen@5d { compatible = "goodix,gt9271"; reg = <0x5d>; - interrupt-parent = <&pio>; - interrupts = <132 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = <&pio 132 IRQ_TYPE_EDGE_RISING>; irq-gpios = <&pio 132 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 133 GPIO_ACTIVE_HIGH>; AVDD28-supply = <&mt6360_ldo1>; @@ -774,8 +773,7 @@ }; &pmic { - interrupt-parent = <&pio>; - interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>; }; &scp { diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index d6cb840b7050..39889d5f8e12 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-yiming-uz801v3.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-huawei-kiwi.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-longcheer-l9100.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-samsung-a7.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb @@ -87,8 +88,10 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-xiaomi-sagit.dtb dtb-$(CONFIG_ARCH_QCOM) += qcm6490-fairphone-fp5.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcm6490-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb @@ -220,6 +223,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-pipa.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb @@ -231,3 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8650-qrd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += x1e80100-qcp.dtb diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts index e636a1cb9b77..8460b538eb6a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts +++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts @@ -67,6 +67,18 @@ }; }; +&usb { + status = "okay"; +}; + +&usb_dwc { + dr_mode = "host"; +}; + +&usbphy0 { + status = "okay"; +}; + &xo_board_clk { clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index 38ffdc3cbdcd..32b178b639f0 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -5,6 +5,7 @@ * Copyright (c) 2023 The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,apss-ipq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq5018.h> #include <dt-bindings/reset/qcom,gcc-ipq5018.h> @@ -36,6 +37,8 @@ reg = <0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; CPU1: cpu@1 { @@ -44,6 +47,8 @@ reg = <0x1>; enable-method = "psci"; next-level-cache = <&L2_0>; + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>; + operating-points-v2 = <&cpu_opp_table>; }; L2_0: l2-cache { @@ -54,6 +59,23 @@ }; }; + cpu_opp_table: opp-table-cpu { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <200000>; + }; + }; + firmware { scm { compatible = "qcom,scm-ipq5018", "qcom,scm"; @@ -82,6 +104,24 @@ #size-cells = <2>; ranges; + bootloader@4a800000 { + reg = <0x0 0x4a800000 0x0 0x200000>; + no-map; + }; + + sbl@4aa00000 { + reg = <0x0 0x4aa00000 0x0 0x100000>; + no-map; + }; + + smem@4ab00000 { + compatible = "qcom,smem"; + reg = <0x0 0x4ab00000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + }; + tz_region: tz@4ac00000 { reg = <0x0 0x4ac00000 0x0 0x200000>; no-map; @@ -94,6 +134,19 @@ #size-cells = <1>; ranges = <0 0 0 0xffffffff>; + usbphy0: phy@5b000 { + compatible = "qcom,ipq5018-usb-hsphy"; + reg = <0x0005b000 0x120>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5018-tlmm"; reg = <0x01000000 0x300000>; @@ -129,6 +182,12 @@ #power-domain-cells = <1>; }; + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + sdhc_1: mmc@7804000 { compatible = "qcom,ipq5018-sdhci", "qcom,sdhci-msm-v5"; reg = <0x7804000 0x1000>; @@ -146,6 +205,16 @@ status = "disabled"; }; + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1d000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x078af000 0x200>; @@ -156,6 +225,61 @@ status = "disabled"; }; + blsp1_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + usb: usb@8af8800 { + compatible = "qcom,ipq5018-dwc3", "qcom,dwc3"; + reg = <0x08af8800 0x400>; + + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq"; + + clocks = <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "core", + "iface", + "sleep", + "mock_utmi"; + + resets = <&gcc GCC_USB0_BCR>; + + qcom,select-utmi-as-pipe-clk; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + usb_dwc: usb@8a00000 { + compatible = "snps,dwc3"; + reg = <0x08a00000 0xe000>; + clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "ref"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phy-names = "usb2-phy"; + phys = <&usbphy0>; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; reg = <0x0b000000 0x1000>, /* GICD */ @@ -189,6 +313,24 @@ clocks = <&sleep_clk>; }; + apcs_glb: mailbox@b111000 { + compatible = "qcom,ipq5018-apcs-apps-global", + "qcom,ipq6018-apcs-apps-global"; + reg = <0x0b111000 0x1000>; + #clock-cells = <1>; + clocks = <&a53pll>, <&xo_board_clk>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; + #mbox-cells = <1>; + }; + + a53pll: clock@b116000 { + compatible = "qcom,ipq5018-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + clocks = <&xo_board_clk>; + clock-names = "xo"; + }; + timer@b120000 { compatible = "arm,armv7-timer-mem"; reg = <0x0b120000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi index 4870cdb764d0..b37ae7749083 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp-common.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "ipq5332.dtsi" / { @@ -39,6 +40,8 @@ pinctrl-names = "default"; led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tx"; default-state = "off"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts index e89e2e948603..846413817e9a 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp441.dts @@ -15,7 +15,7 @@ }; &blsp1_i2c1 { - clock-frequency = <400000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts index efd480a7afdf..ed8a54eb95c0 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp442.dts @@ -15,7 +15,7 @@ }; &blsp1_i2c1 { - clock-frequency = <400000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts index eb1fa33d6fe4..d5f99e741ae5 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts +++ b/arch/arm64/boot/dts/qcom/ipq5332-rdp474.dts @@ -15,7 +15,7 @@ }; &blsp1_i2c1 { - clock-frequency = <400000>; + clock-frequency = <400000>; pinctrl-0 = <&i2c_1_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index d3fef2f80a81..42e2e48b2bc3 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -91,11 +91,19 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; opp-shared; + nvmem-cells = <&cpu_speed_bin>; - opp-1488000000 { - opp-hz = /bits/ 64 <1488000000>; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-supported-hw = <0x7>; + clock-latency-ns = <200000>; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; }; @@ -163,6 +171,11 @@ reg = <0x000a4000 0x721>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@1d { + reg = <0x1d 0x2>; + bits = <7 2>; + }; }; rng: rng@e3000 { @@ -390,8 +403,8 @@ "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; #clock-cells = <1>; - clocks = <&a53pll>, <&xo_board>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo_board>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index e59b9df96c7e..5e1277fea725 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -96,42 +96,49 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; + nvmem-cells = <&cpu_speed_bin>; opp-shared; opp-864000000 { opp-hz = /bits/ 64 <864000000>; opp-microvolt = <725000>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1056000000 { opp-hz = /bits/ 64 <1056000000>; opp-microvolt = <787500>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1320000000 { opp-hz = /bits/ 64 <1320000000>; opp-microvolt = <862500>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; opp-1440000000 { opp-hz = /bits/ 64 <1440000000>; opp-microvolt = <925000>; + opp-supported-hw = <0x3>; clock-latency-ns = <200000>; }; opp-1608000000 { opp-hz = /bits/ 64 <1608000000>; opp-microvolt = <987500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <1062500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -236,31 +243,26 @@ ssphy_0: ssphy@78000 { compatible = "qcom,ipq6018-qmp-usb3-phy"; - reg = <0x0 0x00078000 0x0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0x0 0x00078000 0x0 0x1000>; clocks = <&gcc GCC_USB0_AUX_CLK>, - <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; + <&xo>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB0_PHY_BCR>, <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + reset-names = "phy", + "phy_phy"; - usb0_ssphy: phy@78200 { - reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ - <0x0 0x00078400 0x0 0x200>, /* Rx */ - <0x0 0x00078800 0x0 0x1f8>, /* PCS */ - <0x0 0x00078600 0x0 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "gcc_usb0_pipe_clk_src"; - }; + status = "disabled"; }; qusb_phy_0: qusb@79000 { @@ -314,6 +316,11 @@ reg = <0x0 0x000a4000 0x0 0x2000>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@135 { + reg = <0x135 0x1>; + bits = <7 1>; + }; }; prng: qrng@e3000 { @@ -439,6 +446,26 @@ qcom,ee = <0>; }; + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x78af000 0x0 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x78b0000 0x0 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart3: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x0 0x078b1000 0x0 0x200>; @@ -449,6 +476,36 @@ status = "disabled"; }; + blsp1_uart4: serial@78b2000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x078b2000 0x0 0x200>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart5: serial@78b3000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x78b3000 0x0 0x200>; + interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + blsp1_uart6: serial@78b4000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0 0x078b4000 0x0 0x200>; + interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_spi1: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; #address-cells = <1>; @@ -477,6 +534,20 @@ status = "disabled"; }; + blsp1_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x078b9000 0x0 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 20>, <&blsp_dma 21>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c2: i2c@78b6000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -557,7 +628,7 @@ <&gcc GCC_USB0_MOCK_UTMI_CLK>; assigned-clock-rates = <133330000>, <133330000>, - <20000000>; + <24000000>; resets = <&gcc GCC_USB0_BCR>; status = "disabled"; @@ -566,7 +637,7 @@ compatible = "snps,dwc3"; reg = <0x0 0x08a00000 0x0 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_0>, <&usb0_ssphy>; + phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; clocks = <&xo>; clock-names = "ref"; @@ -611,8 +682,8 @@ compatible = "qcom,ipq6018-apcs-apps-global"; reg = <0x0 0x0b111000 0x0 0x1000>; #clock-cells = <1>; - clocks = <&a53pll>, <&xo>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; @@ -731,7 +802,7 @@ }; }; - pcie0: pci@20000000 { + pcie0: pcie@20000000 { compatible = "qcom,pcie-ipq6018"; reg = <0x0 0x20000000 0x0 0xf1d>, <0x0 0x20000f20 0x0 0xa8>, diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 2f275c84e566..cf295bed3299 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -125,32 +125,26 @@ ssphy_1: phy@58000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; - reg = <0x00058000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00058000 0x1000>; clocks = <&gcc GCC_USB1_AUX_CLK>, - <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; + <&xo>, + <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3phy_1_cc_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB1_PHY_BCR>, - <&gcc GCC_USB3PHY_1_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - usb1_ssphy: phy@58200 { - reg = <0x00058200 0x130>, /* Tx */ - <0x00058400 0x200>, /* Rx */ - <0x00058800 0x1f8>, /* PCS */ - <0x00058600 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_1_cc_pipe_clk"; - }; + status = "disabled"; }; qusb_phy_1: phy@59000 { @@ -168,32 +162,26 @@ ssphy_0: phy@78000 { compatible = "qcom,ipq8074-qmp-usb3-phy"; - reg = <0x00078000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00078000 0x1000>; clocks = <&gcc GCC_USB0_AUX_CLK>, - <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, - <&xo>; - clock-names = "aux", "cfg_ahb", "ref"; + <&xo>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3phy_0_cc_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB0_PHY_BCR>, - <&gcc GCC_USB3PHY_0_PHY_BCR>; - reset-names = "phy","common"; - status = "disabled"; + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - usb0_ssphy: phy@78200 { - reg = <0x00078200 0x130>, /* Tx */ - <0x00078400 0x200>, /* Rx */ - <0x00078800 0x1f8>, /* PCS */ - <0x00078600 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3phy_0_cc_pipe_clk"; - }; + status = "disabled"; }; qusb_phy_0: phy@79000 { @@ -369,8 +357,14 @@ gcc: gcc@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; - clocks = <&xo>, <&sleep_clk>; - clock-names = "xo", "sleep_clk"; + clocks = <&xo>, + <&sleep_clk>, + <&pcie_qmp0>, + <&pcie_qmp1>; + clock-names = "xo", + "sleep_clk", + "pcie0_pipe", + "pcie1_pipe"; #clock-cells = <1>; #power-domain-cells = <1>; #reset-cells = <1>; @@ -406,7 +400,7 @@ }; sdhc_1: mmc@7824900 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; reg-names = "hc", "core"; @@ -523,6 +517,20 @@ status = "disabled"; }; + blsp1_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x78b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 18>, <&blsp_dma 19>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + blsp1_i2c5: i2c@78b9000 { compatible = "qcom,i2c-qup-v2.2.1"; #address-cells = <1>; @@ -628,7 +636,7 @@ compatible = "snps,dwc3"; reg = <0x8a00000 0xcd00>; interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_0>, <&usb0_ssphy>; + phys = <&qusb_phy_0>, <&ssphy_0>; phy-names = "usb2-phy", "usb3-phy"; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; @@ -670,7 +678,7 @@ compatible = "snps,dwc3"; reg = <0x8c00000 0xcd00>; interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - phys = <&qusb_phy_1>, <&usb1_ssphy>; + phys = <&qusb_phy_1>, <&ssphy_1>; phy-names = "usb2-phy", "usb3-phy"; snps,is-utmi-l1-suspend; snps,hird-threshold = /bits/ 8 <0x0>; @@ -708,8 +716,8 @@ compatible = "qcom,ipq8074-apcs-apps-global", "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; - clocks = <&a53pll>, <&xo>; - clock-names = "pll", "xo"; + clocks = <&a53pll>, <&xo>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #clock-cells = <1>; #mbox-cells = <1>; @@ -781,7 +789,7 @@ }; }; - pcie1: pci@10000000 { + pcie1: pcie@10000000 { compatible = "qcom,pcie-ipq8074"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, @@ -842,7 +850,7 @@ status = "disabled"; }; - pcie0: pci@20000000 { + pcie0: pcie@20000000 { compatible = "qcom,pcie-ipq8074-gen3"; reg = <0x20000000 0xf1d>, <0x20000f20 0xa8>, diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi new file mode 100644 index 000000000000..91e104b0f865 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP board common device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "ipq9574.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + regulator_fixed_3p3: s3300 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_3p3"; + }; + + regulator_fixed_0p925: s0925 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-boot-on; + regulator-always-on; + regulator-name = "fixed_0p925"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + button-wps { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&gpio_leds_default>; + pinctrl-names = "default"; + + led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_WLAN; + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + + mp5496_l2: l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio37"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + gpio_leds_default: gpio-leds-default-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb_0_dwc3 { + dr_mode = "host"; +}; + +&usb_0_qmpphy { + vdda-pll-supply = <&mp5496_l2>; + vdda-phy-supply = <®ulator_fixed_0p925>; + + status = "okay"; +}; + +&usb_0_qusbphy { + vdd-supply = <®ulator_fixed_0p925>; + vdda-pll-supply = <&mp5496_l2>; + vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts index 2b093e02637b..f4f9199d4ab1 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -8,58 +8,12 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; }; &sdhc_1 { @@ -74,10 +28,6 @@ status = "okay"; }; -&sleep_clk { - clock-frequency = <32000>; -}; - &tlmm { sdc_default_state: sdc-default-state { clk-pins { @@ -110,15 +60,4 @@ bias-pull-down; }; }; - - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 877026ccc6e2..1bb8d96c9a82 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -8,69 +8,11 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - regulator_fixed_3p3: s3300 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - regulator-name = "fixed_3p3"; - }; - - regulator_fixed_0p925: s0925 { - compatible = "regulator-fixed"; - regulator-min-microvolt = <925000>; - regulator-max-microvolt = <925000>; - regulator-boot-on; - regulator-always-on; - regulator-name = "fixed_0p925"; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - - mp5496_l2: l2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - }; }; &sdhc_1 { @@ -85,10 +27,6 @@ status = "okay"; }; -&sleep_clk { - clock-frequency = <32000>; -}; - &tlmm { sdc_default_state: sdc-default-state { clk-pins { @@ -122,30 +60,3 @@ }; }; }; - -&usb_0_dwc3 { - dr_mode = "host"; -}; - -&usb_0_qmpphy { - vdda-pll-supply = <&mp5496_l2>; - vdda-phy-supply = <®ulator_fixed_0p925>; - - status = "okay"; -}; - -&usb_0_qusbphy { - vdd-supply = <®ulator_fixed_0p925>; - vdda-pll-supply = <&mp5496_l2>; - vdda-phy-dpdm-supply = <®ulator_fixed_3p3>; - - status = "okay"; -}; - -&usb3 { - status = "okay"; -}; - -&xo_board_clk { - clock-frequency = <24000000>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts index c8fa54e1a62c..d36d1078763e 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts index f01de6628c3b..c30c9fbedf26 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts index 6efae3426cb8..0dc382f5d5ec 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp454.dts @@ -8,73 +8,9 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C9"; compatible = "qcom,ipq9574-ap-al02-c9", "qcom,ipq9574"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 8a72ad4afd03..5f83ee42a719 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -106,42 +106,56 @@ }; cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; + compatible = "operating-points-v2-kryo-cpu"; opp-shared; + nvmem-cells = <&cpu_speed_bin>; opp-936000000 { opp-hz = /bits/ 64 <936000000>; opp-microvolt = <725000>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1104000000 { opp-hz = /bits/ 64 <1104000000>; opp-microvolt = <787500>; + opp-supported-hw = <0xf>; + clock-latency-ns = <200000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <862500>; + opp-supported-hw = <0xf>; clock-latency-ns = <200000>; }; opp-1416000000 { opp-hz = /bits/ 64 <1416000000>; opp-microvolt = <862500>; + opp-supported-hw = <0x7>; clock-latency-ns = <200000>; }; opp-1488000000 { opp-hz = /bits/ 64 <1488000000>; opp-microvolt = <925000>; + opp-supported-hw = <0x7>; clock-latency-ns = <200000>; }; opp-1800000000 { opp-hz = /bits/ 64 <1800000000>; opp-microvolt = <987500>; + opp-supported-hw = <0x5>; clock-latency-ns = <200000>; }; opp-2208000000 { opp-hz = /bits/ 64 <2208000000>; opp-microvolt = <1062500>; + opp-supported-hw = <0x1>; clock-latency-ns = <200000>; }; }; @@ -223,6 +237,11 @@ reg = <0x000a4000 0x5a1>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_bin: cpu-speed-bin@15 { + reg = <0x15 0x2>; + bits = <7 2>; + }; }; cryptobam: dma-controller@704000 { @@ -652,8 +671,8 @@ "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; #clock-cells = <1>; - clocks = <&a73pll>, <&xo_board_clk>; - clock-names = "pll", "xo"; + clocks = <&a73pll>, <&xo_board_clk>, <&gcc GPLL0>; + clock-names = "pll", "xo", "gpll0"; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts index 57a74eea1005..b32c7a97394d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> /* * NOTE: The original firmware from Acer can only boot 32-bit kernels. @@ -83,6 +84,29 @@ }; }; +&blsp_i2c4 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + }; + }; +}; + &blsp_i2c5 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts index aa4c1ab1e673..3459145516a1 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts @@ -3,6 +3,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> @@ -22,6 +24,19 @@ stdout-path = "serial0"; }; + reserved-memory { + /delete-node/ reserved@86680000; + /delete-node/ rmtfs@86700000; + + rmtfs: rmtfs@86680000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86680000 0x0 0x160000>; + no-map; + + qcom,client-id = <1>; + }; + }; + gpio-keys { compatible = "gpio-keys"; @@ -50,6 +65,17 @@ }; }; + reg_headphones_avdd: regulator-headphones-avdd { + compatible = "regulator-fixed"; + regulator-name = "headphones_avdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&tlmm 121 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&headphones_avdd_default>; + pinctrl-names = "default"; + }; + usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; id-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>; @@ -58,8 +84,41 @@ }; }; -&blsp_uart2 { +&blsp_i2c3 { status = "okay"; + + headphones: audio-codec@10 { + compatible = "asahi-kasei,ak4375"; + reg = <0x10>; + avdd-supply = <®_headphones_avdd>; + tvdd-supply = <&pm8916_l6>; + pdn-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&headphones_pdn_default>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + }; + + speaker_codec_top: audio-codec@34 { + compatible = "nxp,tfa9897"; + reg = <0x34>; + vddd-supply = <&pm8916_l6>; + rcv-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_top_default>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Top"; + #sound-dai-cells = <0>; + }; + + speaker_codec_bottom: audio-codec@36 { + compatible = "nxp,tfa9897"; + reg = <0x36>; + vddd-supply = <&pm8916_l6>; + rcv-gpios = <&tlmm 111 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&speaker_bottom_default>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Bottom"; + #sound-dai-cells = <0>; + }; }; &blsp_i2c4 { @@ -153,6 +212,22 @@ }; }; +&blsp_uart2 { + status = "okay"; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -169,6 +244,17 @@ status = "okay"; }; +&q6afedai { + dai@18 { + reg = <SECONDARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -183,6 +269,54 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + /* Add pin switches for speakers to allow disabling them individually */ + model = "alcatel-idol3"; + widgets = + "Speaker", "Speaker Top", + "Speaker", "Speaker Bottom"; + pin-switches = "Speaker Top", "Speaker Bottom"; + audio-routing = + "Speaker Top", "Speaker Top OUT", + "Speaker Bottom", "Speaker Bottom OUT", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &pri_mi2s_default &pri_mi2s_ws_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &pri_mi2s_sleep &pri_mi2s_ws_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec_top>, <&speaker_codec_bottom>; + }; + }; +}; + +&sound_link_backend0 { + /* Primary MI2S is not used, replace with Secondary MI2S for headphones */ + link-name = "Secondary MI2S"; + + cpu { + sound-dai = <&q6afedai SECONDARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&headphones>; + }; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -212,6 +346,15 @@ status = "okay"; }; +/* Only some of the pins are used */ +&pri_mi2s_default { + pins = "gpio113", "gpio115"; +}; + +&pri_mi2s_sleep { + pins = "gpio113", "gpio115"; +}; + &tlmm { accel_int_default: accel-int-default-state { pins = "gpio31"; @@ -245,6 +388,20 @@ bias-disable; }; + headphones_avdd_default: headphones-avdd-default-state { + pins = "gpio121"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + headphones_pdn_default: headphones-pdn-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + /* * The OEM wired an additional GPIO to be asserted so that * the si-en,sn3190 LED IC works. Since this GPIO is not @@ -291,6 +448,20 @@ bias-disable; }; + speaker_bottom_default: speaker-bottom-default-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + speaker_top_default: speaker-top-default-state { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + ts_int_reset_default: ts-int-reset-default-state { pins = "gpio13", "gpio100"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts index a8be6ff66893..77618c7374df 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts @@ -3,6 +3,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -130,6 +132,18 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5500000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,micbias1-ext-cap; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_rpm_regulators { pm8916_l17: l17 { regulator-min-microvolt = <2850000>; @@ -151,6 +165,13 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 47d1c5cb13f4..3a3e794c022f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -3,6 +3,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -25,17 +27,45 @@ /* * For some reason, the signed wcnss firmware is not relocatable. - * It must be loaded at 0x8b600000. All other firmware is relocatable, - * so place wcnss at the fixed address and then all other firmware - * regions will be automatically allocated at a fitting place. + * It must be loaded at 0x8b600000. Unfortunately, this also means that + * mpss_mem does not fit when loaded to the typical address at 0x86800000. + * + * Load wcnss_mem to the fixed address and relocate mpss_mem to the next + * working higher address. For some reason the modem firmware does not + * boot when placed at 0x8a800000 to 0x8e800000. */ reserved-memory { + /delete-node/ mpss@86800000; /delete-node/ wcnss; wcnss_mem: wcnss@8b600000 { reg = <0x0 0x8b600000 0x0 0x600000>; no-map; }; + + mpss_mem: mpss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x5000000>; + no-map; + }; + }; + + battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4350000>; + energy-full-design-microwatt-hours = <9500000>; + charge-full-design-microamp-hours = <2500000>; + + ocv-capacity-celsius = <25>; + ocv-capacity-table-0 = <4330000 100>, <4265000 95>, + <4208000 90>, <4153000 85>, <4100000 80>, <4049000 75>, + <4001000 70>, <3962000 65>, <3919000 60>, <3872000 55>, + <3839000 50>, <3817000 45>, <3798000 40>, <3783000 35>, + <3767000 30>, <3747000 25>, <3729000 20>, <3709000 16>, + <3688000 13>, <3681000 11>, <3680000 10>, <3679000 9>, + <3677000 8>, <3674000 7>, <3666000 6>, <3641000 5>, + <3597000 4>, <3537000 3>, <3457000 2>, <3336000 1>, + <3000000 0>; }; gpio-keys { @@ -93,6 +123,7 @@ #size-cells = <0>; vcc-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; led@0 { reg = <0>; @@ -225,6 +256,29 @@ status = "okay"; }; +&pm8916_bms { + status = "okay"; + + monitored-battery = <&battery>; + power-supplies = <&pm8916_charger>; +}; + +&pm8916_charger { + status = "okay"; + + monitored-battery = <&battery>; + + qcom,fast-charge-safe-current = <900000>; + qcom,fast-charge-safe-voltage = <4300000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -237,10 +291,6 @@ }; }; -&pm8916_usbin { - status = "okay"; -}; - &pm8916_vib { status = "okay"; }; @@ -254,14 +304,21 @@ non-removable; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS Internal1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS Internal3"; +}; + &usb { status = "okay"; dr_mode = "peripheral"; - extcon = <&pm8916_usbin>; + extcon = <&pm8916_charger>; }; &usb_hs_phy { - extcon = <&pm8916_usbin>; + extcon = <&pm8916_charger>; }; &venus { diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts index 41cadb906b98..3b7fdb6797a9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts @@ -3,9 +3,12 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "BQ Aquaris X5 (Longcheer L8910)"; @@ -22,6 +25,16 @@ stdout-path = "serial0"; }; + speaker_amp: audio-amplifier { + compatible = "awinic,aw8738"; + mode-gpios = <&tlmm 114 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + + pinctrl-0 = <&spk_ext_pa_default>; + pinctrl-names = "default"; + }; + flash-led-controller { compatible = "ocs,ocp8110"; enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; @@ -74,6 +87,46 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + vin-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + pinctrl-0 = <&status_led_default>; + pinctrl-names = "default"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +}; + &blsp_i2c3 { status = "okay"; @@ -107,6 +160,27 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5000000>; +}; + +&pm8916_codec { + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_gpios { + status_led_default: status-led-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + bias-disable; + output-high; + }; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -137,6 +211,28 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + /* + * Provide widgets/pin-switches to allow enabling speaker separately. + * The hardware does not provide a way to disable the output via the + * headphone jack when the speaker is enabled. + */ + model = "bq-paella"; + widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker"; + audio-routing = + "Speaker", "Speaker Amp OUT", + "Speaker Amp IN", "HPH_R", + "Headphones", "HPH_L", + "Headphones", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + aux-devs = <&speaker_amp>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -205,6 +301,13 @@ bias-disable; }; + spk_ext_pa_default: spk-ext-pa-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + usb_id_default: usb-id-default-state { pins = "gpio110"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi new file mode 100644 index 000000000000..039961622633 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-modem-qdsp6.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * msm8916-modem-qdsp6.dtsi describes the typical modem setup on MSM8916 devices + * (or similar SoCs) with audio routed via the QDSP6 services provided by the + * modem firmware. The digital/analog codec in the SoC/PMIC is used by default, + * but boards can define additional codecs by adding additional backend DAI links. + */ + +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> + +&apr { + status = "okay"; +}; + +&bam_dmux { + status = "okay"; +}; + +&bam_dmux_dma { + status = "okay"; +}; + +&lpass { + status = "reserved"; /* Controlled by QDSP6 */ +}; + +&lpass_codec { + status = "okay"; +}; + +&mba_mem { + status = "okay"; +}; + +&mpss { + status = "okay"; +}; + +&mpss_mem { + status = "okay"; +}; + +&pm8916_codec { + status = "okay"; +}; + +&q6afedai { + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; +}; + +&sound { + compatible = "qcom,msm8916-qdsp6-sndcard"; + model = "msm8916"; + + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; + pinctrl-names = "default", "sleep"; + + status = "okay"; + + frontend0-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + frontend1-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + frontend2-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + frontend3-dai-link { + link-name = "MultiMedia4"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + sound_link_backend0: backend0-dai-link { + link-name = "Primary MI2S"; + + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + sound_link_backend1: backend1-dai-link { + link-name = "Tertiary MI2S"; + + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_TX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi index 0b29132b74e1..2937495940ea 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi @@ -1,10 +1,13 @@ // SPDX-License-Identifier: GPL-2.0-only #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { aliases { @@ -196,6 +199,18 @@ }; }; +&blsp_i2c1 { + status = "okay"; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; +}; + &blsp_i2c2 { status = "okay"; @@ -243,6 +258,25 @@ status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + &mdss { status = "okay"; }; @@ -253,6 +287,10 @@ pinctrl-1 = <&mdss_sleep>; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5400000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -265,6 +303,13 @@ }; }; +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -279,6 +324,32 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + model = "samsung-a2015"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { status = "okay"; extcon = <&muic>, <&muic>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts index f5a808369518..3b934f5eba47 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts @@ -49,11 +49,6 @@ }; }; -&touchkey { - vcc-supply = <®_touch_key>; - vdd-supply = <®_key_led>; -}; - &accelerometer { mount-matrix = "0", "1", "0", "1", "0", "0", @@ -108,6 +103,11 @@ remote-endpoint = <&panel_in>; }; +&touchkey { + vcc-supply = <®_touch_key>; + vdd-supply = <®_key_led>; +}; + &vibrator { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi index 0824ab041d80..3c49dac92d2d 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi @@ -65,6 +65,10 @@ }; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5a00000>; +}; + ®_motor_vdd { regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts index 3f145dde4059..5882b3a593b8 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts @@ -49,6 +49,10 @@ status = "disabled"; }; +&sound { + model = "samsung-gmax"; /* No secondary microphone */ +}; + &tlmm { gpio_leds_default: gpio-led-default-state { pins = "gpio60"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi index c19cf20d7427..fbd2caf405d5 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt5-common.dtsi @@ -3,9 +3,12 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { aliases { @@ -65,25 +68,6 @@ }; }; -&blsp_i2c4 { - status = "okay"; - - fuelgauge@36 { - compatible = "maxim,max77849-battery"; - reg = <0x36>; - - maxim,rsns-microohm = <10000>; - maxim,over-heat-temp = <600>; - maxim,over-volt = <4400>; - - interrupt-parent = <&tlmm>; - interrupts = <121 IRQ_TYPE_EDGE_FALLING>; - - pinctrl-0 = <&fuelgauge_int_default>; - pinctrl-names = "default"; - }; -}; - &blsp_i2c2 { status = "okay"; @@ -112,10 +96,52 @@ }; }; +&blsp_i2c4 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max77849-battery"; + reg = <0x36>; + + maxim,rsns-microohm = <10000>; + maxim,over-heat-temp = <600>; + maxim,over-volt = <4400>; + + interrupt-parent = <&tlmm>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_int_default>; + pinctrl-names = "default"; + }; +}; + &blsp_uart2 { status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5400000>; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -133,6 +159,13 @@ status = "okay"; }; +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -147,6 +180,27 @@ status = "okay"; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { dr_mode = "peripheral"; extcon = <&pm8916_usbin>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts index 75c4854ecd64..5b34529b816c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt510.dts @@ -9,6 +9,14 @@ compatible = "samsung,gt510", "qcom,msm8916"; chassis-type = "tablet"; + speaker_codec: audio-codec { + compatible = "maxim,max98357a"; + sdmode-gpios = <&tlmm 55 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + pinctrl-0 = <&audio_sdmode_default>; + pinctrl-names = "default"; + }; + clk_pwm: pwm { compatible = "clk-pwm"; #pwm-cells = <2>; @@ -112,6 +120,10 @@ }; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -142,7 +154,21 @@ remote-endpoint = <&panel_in>; }; +&sound { + model = "samsung-gt510"; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; +}; + &tlmm { + audio_sdmode_default: audio-sdmode-default-state { + pins = "gpio55"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + buckbooster_en_default: buckbooster-en-default-state { pins = "gpio51"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts index 11359bcc27b3..579312ed53ce 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-gt58.dts @@ -35,6 +35,26 @@ pinctrl-names = "default"; }; + i2c-amplifier { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 55 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 56 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&_i2c_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; + }; + vibrator { compatible = "gpio-vibrator"; enable-gpios = <&tlmm 76 GPIO_ACTIVE_HIGH>; @@ -64,6 +84,10 @@ }; }; +&gpu { + status = "okay"; +}; + &mdss { status = "okay"; }; @@ -94,7 +118,21 @@ remote-endpoint = <&panel_in>; }; +&sound { + model = "samsung-a2015"; + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default &secondary_mic_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep &secondary_mic_default>; + pinctrl-names = "default", "sleep"; +}; + &tlmm { + amp_i2c_default: amp-i2c-default-state { + pins = "gpio55", "gpio56"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + buckbooster_en_default: buckbooster-en-default-state { pins = "gpio8"; function = "gpio"; @@ -123,6 +161,14 @@ bias-disable; }; + secondary_mic_default: secondary-mic-default-state { + pins = "gpio98"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + tsp_int_default: tsp-int-default-state { pins = "gpio13"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi index fe59be3505fe..5ca2ada266f4 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5-common.dtsi @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -135,6 +137,10 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5800000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -154,6 +160,14 @@ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; }; +&sound { + model = "msm8916-1mic"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { extcon = <&muic>, <&muic>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts index 58c2f5a70e78..ba8650971d6a 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts @@ -19,6 +19,10 @@ status = "disabled"; }; +&pm8916_codec { + qcom,micbias1-ext-cap; +}; + &touchscreen { /* FIXME: Missing sm5703-mfd driver to power up vdd-supply */ }; diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts index 68da2a2d3077..5ce8f1350abc 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -319,6 +321,10 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5a00000>; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -350,6 +356,13 @@ no-1-8-v; }; +&sound { + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; +}; + &usb { status = "okay"; extcon = <&muic>, <&muic>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts index 6fe1850ba20e..f34997500891 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts @@ -13,16 +13,16 @@ gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; }; -&led_r { - gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; +&led_b { + gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; }; &led_g { gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>; }; -&led_b { - gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>; +&led_r { + gpios = <&tlmm 82 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts index 16d4a91022be..6cb3911ba1c9 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts @@ -13,16 +13,16 @@ gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; }; -&led_r { - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; +&led_b { + gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; }; &led_g { gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; }; -&led_b { - gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; +&led_r { + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; }; &mpss { diff --git a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts index 419f35c1fc92..510b3b3c4e3c 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "msm8916-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/leds/common.h> @@ -25,6 +27,28 @@ stdout-path = "serial0"; }; + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Speaker Amp"; + pinctrl-0 = <&speaker_amp_default>; + pinctrl-names = "default"; + }; + + /* + * This seems to be actually an analog switch that either routes audio + * to the headphone jack or nowhere. Given that we need to enable a GPIO + * to get sound on headphones, modelling it as simple-audio-amplifier + * works just fine. + */ + headphones_switch: audio-switch { + compatible = "simple-audio-amplifier"; + enable-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; + sound-name-prefix = "Headphones Switch"; + pinctrl-0 = <&headphones_switch_default>; + pinctrl-names = "default"; + }; + flash-led-controller { compatible = "ocs,ocp8110"; enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; @@ -118,6 +142,7 @@ #size-cells = <0>; vcc-supply = <&pm8916_l16>; + vio-supply = <&pm8916_l5>; led@0 { reg = <0>; @@ -146,6 +171,18 @@ status = "okay"; }; +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5100000>; +}; + +&pm8916_codec { + qcom,micbias1-ext-cap; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 100 120 180 500>; + qcom,mbhc-vthreshold-high = <75 100 120 180 500>; + qcom,hphl-jack-type-normally-open; +}; + &pm8916_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -180,6 +217,30 @@ non-removable; }; +&sound { + /* + * Provide widgets/pin-switches to allow enabling speaker and headphones + * separately. Both are routed via the HPH_L/HPH_R pins of the codec. + */ + model = "wt88047"; + widgets = + "Speaker", "Speaker", + "Headphone", "Headphones"; + pin-switches = "Speaker", "Headphones"; + audio-routing = + "Speaker", "Speaker Amp OUTL", + "Speaker", "Speaker Amp OUTR", + "Speaker Amp INL", "HPH_R", + "Speaker Amp INR", "HPH_R", + "Headphones", "Headphones Switch OUTL", + "Headphones", "Headphones Switch OUTR", + "Headphones Switch INL", "HPH_L", + "Headphones Switch INR", "HPH_R", + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2"; + aux-devs = <&speaker_amp>, <&headphones_switch>; +}; + &usb { status = "okay"; extcon = <&usb_id>, <&usb_id>; @@ -226,6 +287,13 @@ bias-pull-up; }; + headphones_switch_default: headphones-switch-default-state { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + imu_default: imu-default-state { pins = "gpio115"; function = "gpio"; @@ -234,6 +302,13 @@ bias-disable; }; + speaker_amp_default: speaker-amp-default-state { + pins = "gpio117"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + touchscreen_default: touchscreen-default-state { touchscreen-pins { pins = "gpio13"; diff --git a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts index 5e6ba8c58bb5..a98efcfe78b7 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-yiming-uz801v3.dts @@ -13,16 +13,16 @@ gpios = <&tlmm 23 GPIO_ACTIVE_LOW>; }; -&led_r { - gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; +&led_b { + gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; }; &led_g { gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; }; -&led_b { - gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; +&led_r { + gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; }; &button_default { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 4f799b536a92..7f8327b0dbdb 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> / { @@ -1989,6 +1990,54 @@ label = "hexagon"; + apr: apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + fastrpc { compatible = "qcom,fastrpc"; qcom,smd-channels = "fastrpcsmd-apps-dsp"; @@ -2106,6 +2155,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; + qcom,controlled-remotely; }; blsp_uart1: serial@78af000 { diff --git a/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts new file mode 100644 index 000000000000..3cec51891aed --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-huawei-kiwi.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "msm8939-pm8916.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Huawei Honor 5X / GR5 (2016)"; + compatible = "huawei,kiwi", "qcom,msm8939"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1600000>; + no-map; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@1e { + compatible = "kionix,kx023-1025"; + reg = <0x1e>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; + }; + + proximity@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + + interrupt-parent = <&tlmm>; + interrupts = <113 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + led-max-microamp = <25000>; + amstaos,proximity-diodes = <0>; + + pinctrl-0 = <&prox_irq_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + touchscreen@1c { + compatible = "cypress,tt21000"; + + reg = <0x1c>; + interrupt-parent = <&tlmm>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + /* + * NOTE: vdd is not directly supplied by pm8916_l16, it seems to be a + * fixed regulator that is automatically enabled by pm8916_l16. + */ + vdd-supply = <&pm8916_l16>; + vddio-supply = <&pm8916_l16>; + + pinctrl-0 = <&touchscreen_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_uart2 { + status = "okay"; +}; + +&pm8916_l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; +}; + +&pm8916_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; +}; + +&pm8916_vib { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio69"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + prox_irq_default: prox-irq-default-state { + pins = "gpio113"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + touchscreen_default: touchscreen-default-state { + pins = "gpio12", "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts index 6802714fda3f..e3404c4455cf 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-longcheer-l9100.dts @@ -8,6 +8,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/pinctrl/qcom,pmic-mpp.h> / { @@ -120,6 +121,46 @@ }; +&blsp_i2c2 { + status = "okay"; + + led-controller@30 { + compatible = "kinetic,ktd2026"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + + vin-supply = <&pm8916_l17>; + vio-supply = <&pm8916_l6>; + + pinctrl-0 = <&status_led_default>; + pinctrl-names = "default"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +}; + &blsp_i2c3 { status = "okay"; @@ -139,6 +180,7 @@ light-sensor@23 { compatible = "liteon,ltr559"; reg = <0x23>; + proximity-near-level = <75>; vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l5>; @@ -184,6 +226,16 @@ status = "okay"; }; +&pm8916_gpios { + status_led_default: status-led-default-state { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = <PM8916_GPIO_VPH>; + bias-disable; + output-high; + }; +}; + &pm8916_mpps { pwm_out: mpp4-state { pins = "mpp4"; @@ -247,6 +299,10 @@ compatible = "qcom,wcn3620"; }; +&wcnss_mem { + status = "okay"; +}; + &tlmm { button_backlight_default: button-backlight-default-state { pins = "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts index fccd8fec8b8f..aa6c39482a2f 100644 --- a/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts +++ b/arch/arm64/boot/dts/qcom/msm8939-samsung-a7.dts @@ -3,10 +3,12 @@ /dts-v1/; #include "msm8939-pm8916.dtsi" +#include "msm8916-modem-qdsp6.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/apq8016-lpass.h> / { model = "Samsung Galaxy A7 (2015)"; @@ -287,6 +289,18 @@ }; }; +&blsp_i2c2 { + status = "okay"; + + speaker_codec: audio-codec@34 { + compatible = "nxp,tfa9895"; + reg = <0x34>; + vddd-supply = <&pm8916_l5>; + sound-name-prefix = "Speaker"; + #sound-dai-cells = <0>; + }; +}; + &blsp_i2c5 { status = "okay"; @@ -309,6 +323,29 @@ status = "okay"; }; +/* + * For some reason the speaker amplifier is connected to the second SD line + * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the + * device tree, otherwise audio will seemingly play fine on the wrong SD line + * but the speaker stays silent. + * + * When routing audio via QDSP6 (the default) the &lpass node is reserved and + * the definitions from &q6afedai are used. When the modem is disabled audio can + * be alternatively routed directly to the LPASS hardware with reduced latency. + * The definitions for &lpass are here for completeness to simplify changing the + * setup with minor changes to the DT (either manually or with DT overlays). + */ +&lpass { + dai-link@3 { + reg = <MI2S_QUATERNARY>; + qcom,playback-sd-lines = <1>; + }; +}; + +&mpss_mem { + reg = <0x0 0x86800000 0x0 0x5800000>; +}; + &pm8916_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -321,6 +358,13 @@ }; }; +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + &sdhc_1 { status = "okay"; }; @@ -335,6 +379,32 @@ status = "okay"; }; +&sound { + model = "samsung-a2015"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + + sound_link_backend2: backend2-dai-link { + link-name = "Quaternary MI2S"; + + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + platform { + sound-dai = <&q6routing>; + }; + codec { + sound-dai = <&speaker_codec>; + }; + }; +}; + &usb { extcon = <&muic>, <&muic>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi index 324b5d26db40..29f6bd9df2eb 100644 --- a/arch/arm64/boot/dts/qcom/msm8939.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/reset/qcom,gcc-msm8939.h> +#include <dt-bindings/soc/qcom,apr.h> #include <dt-bindings/thermal/thermal.h> / { @@ -1537,6 +1538,20 @@ #interrupt-cells = <4>; }; + bam_dmux_dma: dma-controller@4044000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x04044000 0x19000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + qcom,ee = <0>; + + num-channels = <6>; + qcom,num-ees = <1>; + qcom,powered-remotely; + + status = "disabled"; + }; + mpss: remoteproc@4080000 { compatible = "qcom,msm8916-mss-pil"; reg = <0x04080000 0x100>, <0x04020000 0x040>; @@ -1569,6 +1584,22 @@ qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; status = "disabled"; + bam_dmux: bam-dmux { + compatible = "qcom,bam-dmux"; + + interrupt-parent = <&hexagon_smsm>; + interrupts = <1 IRQ_TYPE_EDGE_BOTH>, <11 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "pc", "pc-ack"; + + qcom,smem-states = <&apps_smsm 1>, <&apps_smsm 11>; + qcom,smem-state-names = "pc", "pc-ack"; + + dmas = <&bam_dmux_dma 4>, <&bam_dmux_dma 5>; + dma-names = "tx", "rx"; + + status = "disabled"; + }; + mba { memory-region = <&mba_mem>; }; @@ -1585,6 +1616,54 @@ qcom,remote-pid = <1>; label = "hexagon"; + + apr: apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + q6core: service@3 { + compatible = "qcom,q6core"; + reg = <APR_SVC_ADSP_CORE>; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; }; }; @@ -1682,6 +1761,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; + qcom,controlled-remotely; }; blsp_uart1: serial@78af000 { @@ -2116,6 +2196,8 @@ #address-cells = <1>; #size-cells = <1>; ranges; + /* Necessary because firmware does not configure this correctly */ + clock-frequency = <19200000>; frame@b121000 { reg = <0x0b121000 0x1000>, diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts index ed95d09cedb1..6b9245cd8b0c 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-mido.dts @@ -111,6 +111,7 @@ reg = <0x45>; vcc-supply = <&pm8953_l10>; + vio-supply = <&pm8953_l5>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts index 61ff629c9bf3..9ac4f507e321 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts @@ -104,6 +104,7 @@ reg = <0x45>; vcc-supply = <&pm8953_l10>; + vio-supply = <&pm8953_l5>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts index 1a1d3f92a511..b0588f30f8f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -113,6 +113,7 @@ reg = <0x45>; vcc-supply = <&pm8953_l10>; + vio-supply = <&pm8953_l5>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi index e7de7632669a..ad2f8cf9c966 100644 --- a/arch/arm64/boot/dts/qcom/msm8953.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi @@ -174,10 +174,10 @@ }; }; - memory { + memory@10000000 { device_type = "memory"; /* We expect the bootloader to fill in the reg */ - reg = <0 0 0 0>; + reg = <0 0x10000000 0 0>; }; pmu { @@ -726,6 +726,48 @@ bias-disable; }; + spi_3_default: spi-3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi_3_sleep: spi-3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_5_default: spi-5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_spi5"; + drive-strength = <2>; + bias-disable; + }; + + spi_5_sleep: spi-5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_6_default: spi-6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_spi6"; + drive-strength = <2>; + bias-disable; + }; + + spi_6_sleep: spi-6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcnss_pin_a: wcnss-active-state { wcss-wlan2-pins { @@ -1004,7 +1046,7 @@ apps_iommu: iommu@1e20000 { compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; - ranges = <0 0x01e20000 0x20000>; + ranges = <0 0x01e20000 0x20000>; clocks = <&gcc GCC_SMMU_CFG_CLK>, <&gcc GCC_APSS_TCU_ASYNC_CLK>; @@ -1360,6 +1402,26 @@ status = "disabled"; }; + spi_3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_3_default>; + pinctrl-1 = <&spi_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + i2c_4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x078b8000 0x600>; @@ -1413,6 +1475,26 @@ status = "disabled"; }; + spi_5: spi@7af5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_5_default>; + pinctrl-1 = <&spi_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + i2c_6: i2c@7af6000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af6000 0x600>; @@ -1433,6 +1515,26 @@ status = "disabled"; }; + spi_6: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_6_default>; + pinctrl-1 = <&spi_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + i2c_7: i2c@7af7000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x07af7000 0x600>; @@ -1645,7 +1747,7 @@ apr { compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - qcom,apr-domain = <APR_DOMAIN_ADSP>; + qcom,domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 6ba9da9e6a8b..8c6a7efa90c4 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -444,6 +444,38 @@ reg = <0x0 0x80000000 0x0 0x0>; }; + etm { + compatible = "qcom,coresight-remote-etm"; + + out-ports { + port { + modem_etm_out_funnel_in2: endpoint { + remote-endpoint = + <&funnel_in2_in_modem_etm>; + }; + }; + }; + }; + + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 1>; + interrupt-controller; + #interrupt-cells = <2>; + #power-domain-cells = <0>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <2 184>, /* TSENS1 upper_lower_int */ + <52 243>, /* DWC3_PRI ss_phy_irq */ + <79 347>, /* DWC3_PRI hs_phy_irq */ + <80 352>, /* DWC3_SEC hs_phy_irq */ + <81 347>, /* QUSB2_PHY_PRI DP+DM */ + <82 352>, /* QUSB2_PHY_SEC DP+DM */ + <87 326>; /* SPMI */ + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -733,8 +765,15 @@ }; rpm_msg_ram: sram@68000 { - compatible = "qcom,rpm-msg-ram"; + compatible = "qcom,rpm-msg-ram", "mmio-sram"; reg = <0x00068000 0x6000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00068000 0x7000>; + + apss_mpm: sram@1b8 { + reg = <0x1b8 0x48>; + }; }; qfprom@74000 { @@ -779,10 +818,10 @@ <&pciephy_0>, <&pciephy_1>, <&pciephy_2>, - <&ssusb_phy_0>, - <&ufsphy_lane 0>, - <&ufsphy_lane 1>, - <&ufsphy_lane 2>; + <&usb3phy>, + <&ufsphy 0>, + <&ufsphy 1>, + <&ufsphy 2>; clock-names = "cxo", "cxo2", "sleep_clk", @@ -820,8 +859,8 @@ reg = <0x004ad000 0x1000>, /* TM */ <0x004ac000 0x1000>; /* SROT */ #qcom,sensors = <8>; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -1343,6 +1382,7 @@ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 150>; + wakeup-parent = <&mpm>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -1870,7 +1910,7 @@ <0x0400a000 0x002100>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 87 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -2047,7 +2087,7 @@ reg = <0x00624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lane>; + phys = <&ufsphy>; phy-names = "ufsphy"; power-domains = <&gcc UFS_GDSC>; @@ -2100,25 +2140,18 @@ ufsphy: phy@627000 { compatible = "qcom,msm8996-qmp-ufs-phy"; - reg = <0x00627000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00627000 0x1000>; clocks = <&gcc GCC_UFS_CLKREF_CLK>; clock-names = "ref"; resets = <&ufshc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufsphy_lane: phy@627400 { - reg = <0x627400 0x12c>, - <0x627600 0x200>, - <0x627c00 0x1b4>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; camss: camss@a34000 { @@ -2644,6 +2677,14 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; + in-ports { + port { + funnel_in2_in_modem_etm: endpoint { + remote-endpoint = + <&modem_etm_out_funnel_in2>; + }; + }; + }; out-ports { port { @@ -3026,8 +3067,8 @@ #size-cells = <1>; ranges; - interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 79 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 52 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hs_phy_irq", "ss_phy_irq"; clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>, @@ -3056,7 +3097,7 @@ compatible = "snps,dwc3"; reg = <0x06a00000 0xcc00>; interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; - phys = <&hsusb_phy1>, <&ssusb_phy_0>; + phys = <&hsusb_phy1>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,hird-threshold = /bits/ 8 <0>; snps,dis_u2_susphy_quirk; @@ -3068,32 +3109,26 @@ usb3phy: phy@7410000 { compatible = "qcom,msm8996-qmp-usb3-phy"; - reg = <0x07410000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x07410000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, - <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_CLKREF_CLK>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB3_PHY_BCR>, - <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; - status = "disabled"; - - ssusb_phy_0: phy@7410200 { - reg = <0x07410200 0x200>, - <0x07410400 0x130>, - <0x07410600 0x1a8>; - #phy-cells = <0>; + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; - #clock-cells = <0>; - clock-output-names = "usb3_phy_pipe_clk_src"; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - }; + status = "disabled"; }; hsusb_phy1: phy@7411000 { diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index b485bf925ce6..bb591c6bf573 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -933,7 +933,7 @@ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-msm8998", "qcom,pcie-msm8996"; reg = <0x01c00000 0x2000>, <0x1b000000 0xf1d>, @@ -1004,7 +1004,7 @@ compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x01da4000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufsphy_lanes>; + phys = <&ufsphy>; phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_GDSC>; @@ -1045,11 +1045,7 @@ ufsphy: phy@1da7000 { compatible = "qcom,msm8998-qmp-ufs-phy"; - reg = <0x01da7000 0x18c>; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - ranges; + reg = <0x01da7000 0x1000>; clock-names = "ref", @@ -1061,14 +1057,8 @@ reset-names = "ufsphy"; resets = <&ufshc 0>; - ufsphy_lanes: phy@1da7400 { - reg = <0x01da7400 0x128>, - <0x01da7600 0x1fc>, - <0x01da7c00 0x1dc>, - <0x01da7800 0x128>, - <0x01da7a00 0x1fc>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + status = "disabled"; }; tcsr_mutex: hwlock@1f40000 { @@ -2031,9 +2021,11 @@ cpu = <&CPU4>; - port { - etm4_out: endpoint { - remote-endpoint = <&apss_funnel_in4>; + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = <&apss_funnel_in4>; + }; }; }; }; @@ -2048,9 +2040,11 @@ cpu = <&CPU5>; - port { - etm5_out: endpoint { - remote-endpoint = <&apss_funnel_in5>; + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = <&apss_funnel_in5>; + }; }; }; }; @@ -2065,9 +2059,11 @@ cpu = <&CPU6>; - port { - etm6_out: endpoint { - remote-endpoint = <&apss_funnel_in6>; + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = <&apss_funnel_in6>; + }; }; }; }; @@ -2082,9 +2078,11 @@ cpu = <&CPU7>; - port { - etm7_out: endpoint { - remote-endpoint = <&apss_funnel_in7>; + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = <&apss_funnel_in7>; + }; }; }; }; @@ -2149,7 +2147,7 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&qusb2phy>, <&usb1_ssphy>; + phys = <&qusb2phy>, <&usb3phy>; phy-names = "usb2-phy", "usb3-phy"; snps,has-lpm-erratum; snps,hird-threshold = /bits/ 8 <0x10>; @@ -2158,33 +2156,26 @@ usb3phy: phy@c010000 { compatible = "qcom,msm8998-qmp-usb3-phy"; - reg = <0x0c010000 0x18c>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0c010000 0x1000>; clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB3_CLKREF_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, - <&gcc GCC_USB3_CLKREF_CLK>; - clock-names = "aux", "cfg_ahb", "ref"; + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + clock-output-names = "usb3_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; resets = <&gcc GCC_USB3_PHY_BCR>, <&gcc GCC_USB3PHY_PHY_BCR>; - reset-names = "phy", "common"; + reset-names = "phy", + "phy_phy"; - usb1_ssphy: phy@c010200 { - reg = <0xc010200 0x128>, - <0xc010400 0x200>, - <0xc010c00 0x20c>, - <0xc010600 0x128>, - <0xc010800 0x200>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; - }; + status = "disabled"; }; qusb2phy: phy@c012000 { diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi index df0afe82f250..3bf7cf5d1700 100644 --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi @@ -148,7 +148,7 @@ status = "disabled"; }; - pm7250b_gpios: pinctrl@c000 { + pm7250b_gpios: gpio@c000 { compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi index db3d5c17a77d..797a18c249a4 100644 --- a/arch/arm64/boot/dts/qcom/pm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi @@ -64,9 +64,6 @@ pm8550_pwm: pwm { compatible = "qcom,pm8550-pwm", "qcom,pm8350c-pwm"; - - #address-cells = <1>; - #size-cells = <0>; #pwm-cells = <2>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi index c47646a467be..4dc1f03ab2c7 100644 --- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi @@ -33,16 +33,16 @@ &spmi_bus { - pm8550ve: pmic@5 { + pm8550ve: pmic@PMK8550VE_SID { compatible = "qcom,pm8550", "qcom,spmi-pmic"; - reg = <0x5 SPMI_USID>; + reg = <PMK8550VE_SID SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm8550ve_temp_alarm: temp-alarm@a00 { compatible = "qcom,spmi-temp-alarm"; reg = <0xa00>; - interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; + interrupts = <PMK8550VE_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>; #thermal-sensor-cells = <0>; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f4de86787743..4b2e8fb47d2d 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,6 +41,35 @@ }; }; + pm8916_charger: charger@1000 { + compatible = "qcom,pm8916-lbc"; + reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>; + reg-names = "chgr", "bat_if", "usb", "misc"; + + interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "vbat_det", + "fast_chg", + "chg_fail", + "chg_done", + "bat_pres", + "temp_ok", + "coarse_det", + "usb_vbus", + "chg_gone", + "overtemp"; + + status = "disabled"; + }; + pm8916_usbin: usb-detect@1300 { compatible = "qcom,pm8941-misc"; reg = <0x1300>; @@ -91,6 +120,25 @@ }; }; + pm8916_bms: battery@4000 { + compatible = "qcom,pm8916-bms-vm"; + reg = <0x4000>; + interrupts = <0x0 0x40 0 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 1 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 2 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 3 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 4 IRQ_TYPE_EDGE_RISING>, + <0x0 0x40 5 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "cv_leave", + "cv_enter", + "ocv_good", + "ocv_thr", + "fifo", + "state_chg"; + + status = "disabled"; + }; + rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 1eb74017062d..f0ed15458dd7 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -22,7 +22,7 @@ mode-bootloader = <0x02>; }; }; - + &spmi_bus { pmk8350: pmic@PMK8350_SID { compatible = "qcom,pmk8350", "qcom,spmi-pmic"; diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index d46e591e72b5..0911fb08ed63 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -5,12 +5,15 @@ * Based on sm6115.dtsi and previous efforts by Shawn Guo & Loic Poulain. */ +#include <dt-bindings/clock/qcom,dispcc-qcm2290.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interconnect/qcom,qcm2290.h> +#include <dt-bindings/interconnect/qcom,rpm-icc.h> #include <dt-bindings/power/qcom-rpmpd.h> / { @@ -150,6 +153,8 @@ clocks = <&rpmcc RPM_SMD_CE1_CLK>; clock-names = "core"; #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; }; }; @@ -194,6 +199,7 @@ CLUSTER_PD: power-domain-cpu-cluster { #power-domain-cells = <0>; + power-domains = <&mpm>; domain-idle-states = <&CLUSTER_SLEEP>; }; }; @@ -261,6 +267,24 @@ }; }; }; + + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs_glb 1>; + interrupt-controller; + #interrupt-cells = <2>; + #power-domain-cells = <0>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <2 275>, /* TSENS0 uplow */ + <5 296>, /* Soundwire master_irq */ + <12 422>, /* DWC3 ss_phy_irq */ + <24 79>, /* Soundwire wake_irq */ + <86 183>, /* MPM wake, SPMI */ + <90 260>; /* QUSB2_PHY DP+DM */ + }; }; reserved_memory: reserved-memory { @@ -424,6 +448,7 @@ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; gpio-ranges = <&tlmm 0 0 127>; + wakeup-parent = <&mpm>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -668,6 +693,33 @@ status = "disabled"; }; + system_noc: interconnect@1880000 { + compatible = "qcom,qcm2290-snoc"; + reg = <0x0 0x01880000 0x0 0x60200>; + #interconnect-cells = <2>; + + qup_virt: interconnect-qup { + compatible = "qcom,qcm2290-qup-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,qcm2290-mmnrt-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,qcm2290-mmrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,qcm2290-cnoc"; + reg = <0x0 0x01900000 0x0 0x8200>; + #interconnect-cells = <2>; + }; + qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; @@ -680,6 +732,60 @@ }; }; + pmu@1b8e300 { + compatible = "qcom,qcm2290-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &bimc SLAVE_EBI1 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, @@ -692,7 +798,7 @@ "obsrvr", "intr", "cnfg"; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "periph_irq"; qcom,ee = <0>; qcom,channel = <0>; @@ -707,8 +813,8 @@ reg = <0x0 0x04411000 0x0 0x1ff>, <0x0 0x04410000 0x0 0x8>; #qcom,sensors = <10>; - interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 2 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; }; @@ -720,9 +826,22 @@ clock-names = "core"; }; + bimc: interconnect@4480000 { + compatible = "qcom,qcm2290-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + rpm_msg_ram: sram@45f0000 { - compatible = "qcom,rpm-msg-ram"; + compatible = "qcom,rpm-msg-ram", "mmio-sram"; reg = <0x0 0x045f0000 0x0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x045f0000 0x7000>; + + apss_mpm: sram@1b8 { + reg = <0x1b8 0x48>; + }; }; sram@4690000 { @@ -755,13 +874,45 @@ resets = <&gcc GCC_SDCC1_BCR>; power-domains = <&rpmpd QCM2290_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; iommus = <&apps_smmu 0xc0 0x0>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x000f642c>; qcom,ddr-config = <0x80040868>; bus-width = <8>; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; }; sdhc_2: mmc@4784000 { @@ -785,6 +936,12 @@ power-domains = <&rpmpd QCM2290_VDDCX>; operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0xa0 0x0>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; @@ -798,11 +955,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -850,6 +1011,15 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -866,6 +1036,12 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -879,6 +1055,12 @@ clock-names = "se"; pinctrl-0 = <&qup_uart0_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -893,6 +1075,15 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -909,6 +1100,12 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -925,6 +1122,15 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -941,6 +1147,12 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -957,6 +1169,15 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -973,6 +1194,12 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -989,6 +1216,15 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1005,6 +1241,12 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1018,6 +1260,12 @@ clock-names = "se"; pinctrl-0 = <&qup_uart4_default>; pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1032,6 +1280,15 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1048,6 +1305,12 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1057,9 +1320,10 @@ usb: usb@4ef8800 { compatible = "qcom,qcm2290-dwc3", "qcom,dwc3"; reg = <0x0 0x04ef8800 0x0 0x400>; - interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "hs_phy_irq", "ss_phy_irq"; + interrupts-extended = <&intc GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq"; clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>, @@ -1080,6 +1344,13 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; wakeup-source; #address-cells = <2>; @@ -1105,6 +1376,225 @@ }; }; + mdss: display-subsystem@5e00000 { + compatible = "qcom,qcm2290-mdss"; + reg = <0x0 0x05e00000 0x0 0x1000>; + reg-names = "mdss"; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "core"; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x420 0x2>, + <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdp: display-controller@5e01000 { + compatible = "qcom,qcm2290-dpu"; + reg = <0x0 0x05e01000 0x0 0x8f000>, + <0x0 0x05eb0000 0x0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "bus", + "iface", + "core", + "lut", + "vsync"; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-307200000 { + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmpd_opp_svs_plus>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@5e94000 { + compatible = "qcom,qcm2290-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x0 0x05e94000 0x0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmpd QCM2290_VDDCX>; + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmpd_opp_min_svs>; + }; + + opp-164000000 { + opp-hz = /bits/ 64 <164000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmpd_opp_svs>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@5e94400 { + compatible = "qcom,dsi-phy-14nm-2290"; + reg = <0x0 0x05e94400 0x0 0x100>, + <0x0 0x05e94500 0x0 0x300>, + <0x0 0x05e94800 0x0 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", + "ref"; + + power-domains = <&rpmpd QCM2290_VDDMX>; + required-opps = <&rpmpd_opp_nom>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@5f00000 { + compatible = "qcom,qcm2290-dispcc"; + reg = <0x0 0x05f00000 0x0 0x20000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&rpmcc RPM_SMD_XO_A_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk"; + #power-domain-cells = <1>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + remoteproc_mpss: remoteproc@6080000 { compatible = "qcom,qcm2290-mpss-pas", "qcom,sm6115-mpss-pas"; reg = <0x0 0x06080000 0x0 0x100>; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index 2de0b8c26c35..176898c9dbbd 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -9,6 +9,8 @@ #define PM7250B_SID 8 #define PM7250B_SID1 9 +#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> @@ -75,26 +77,11 @@ no-map; }; - adsp_mem: adsp@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - cdsp_mem: cdsp@88f00000 { reg = <0x0 0x88f00000 0x0 0x1e00000>; no-map; }; - mpss_mem: mpss@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - - wpss_mem: wpss@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; - no-map; - }; - rmtfs_mem: memory@f8500000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0xf8500000 0x0 0x600000>; @@ -134,6 +121,106 @@ enable-active-high; vin-supply = <&vreg_bob>; }; + + thermal-zones { + camera-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + chg-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + conn-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + quiet-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + rear-cam-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + sdm-skin-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + xo-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; + + trips { + active-config0 { + temperature = <125000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + }; }; &apps_rsc { @@ -182,8 +269,9 @@ }; vreg_l7b: ldo7 { - regulator-min-microvolt = <2400000>; - regulator-max-microvolt = <3544000>; + /* Constrained for UFS VCC, at least until UFS driver scales voltage */ + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; @@ -425,6 +513,42 @@ status = "okay"; }; +&pm7250b_adc { + channel@4d { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "charger_skin_therm"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "conn_therm"; + }; +}; + +&pm7250b_adc_tm { + status = "okay"; + + charger-skin-therm@0 { + reg = <0>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + conn-therm@1 { + reg = <1>; + io-channels = <&pm7250b_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm7325_gpios { volume_down_default: volume-down-default-state { pins = "gpio6"; @@ -448,10 +572,93 @@ }; }; +&pmk8350_adc_tm { + status = "okay"; + + xo-therm@0 { + reg = <0>; + io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + quiet-therm@1 { + reg = <1>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + cam-flash-therm@2 { + reg = <2>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + sdm-skin-therm@3 { + reg = <3>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + + wide-rfc-therm@4 { + reg = <4>; + io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pmk8350_rtc { status = "okay"; }; +&pmk8350_vadc { + status = "okay"; + + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pmk8350_xo_therm"; + }; + + channel@144 { + reg = <PM7325_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_quiet_therm"; + }; + + channel@145 { + reg = <PM7325_ADC7_AMUX_THM2_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_cam_flash_therm"; + }; + + channel@146 { + reg = <PM7325_ADC7_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_sdm_skin_therm"; + }; + + channel@147 { + reg = <PM7325_ADC7_AMUX_THM4_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,pre-scaling = <1 1>; + label = "pm7325_wide_rfc_therm"; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -489,6 +696,26 @@ status = "okay"; }; +&remoteproc_adsp { + firmware-name = "qcom/qcm6490/fairphone5/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/qcm6490/fairphone5/cdsp.mbn"; + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/qcm6490/fairphone5/modem.mbn"; + status = "okay"; +}; + +&remoteproc_wpss { + firmware-name = "qcom/qcm6490/fairphone5/wpss.mbn"; + status = "okay"; +}; + &sdc2_clk { drive-strength = <16>; bias-disable; @@ -632,6 +859,28 @@ }; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7b>; + vcc-max-microamp = <800000>; + /* + * Technically l9b enables an eLDO (supplied by s1b) which then powers + * VCCQ2 of the UFS. + */ + vccq-supply = <&vreg_l9b>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c>; + vdda-pll-supply = <&vreg_l6b>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; @@ -665,3 +914,8 @@ status = "okay"; }; + +&wifi { + qcom,ath11k-calibration-variant = "Fairphone_5"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts new file mode 100644 index 000000000000..03e97e27d16d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -0,0 +1,468 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &video_mem; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Qualcomm Technologies, Inc. QCM6490 IDP"; + compatible = "qcom,qcm6490-idp", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + wpss_mem: wpss@84800000 { + reg = <0x0 0x84800000 0x0 0x1900000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b300000 { + reg = <0x0 0x8b300000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8b310000 { + reg = <0x0 0x8b310000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted_apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <4350000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l3-supply = <&vreg_s2b_0p876>; + vdd-l5-supply = <&vreg_s2b_0p876>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p752: ldo4 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + reg_l5b_0p752: ldo5 { + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <35440000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&sdhc_1 { + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p952>; + vqmmc-supply = <&vreg_l19b_1p8>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 2>, /* ADSP */ + <48 4>; /* NFC */ +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&wifi { + memory-region = <&wlan_fw_mem>; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi index 2721f32dfb71..6ac64ce9bb68 100644 --- a/arch/arm64/boot/dts/qcom/qcs404.dtsi +++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi @@ -1461,7 +1461,7 @@ }; }; - pcie: pci@10000000 { + pcie: pcie@10000000 { compatible = "qcom,pcie-qcs404"; reg = <0x10000000 0xf1d>, <0x10000f20 0xa8>, diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts new file mode 100644 index 000000000000..8bb7d13d85f6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -0,0 +1,455 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +/* PM7250B is configured to use SID8/9 */ +#define PM7250B_SID 8 +#define PM7250B_SID1 9 + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc7280.dtsi" +#include "pm7250b.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +/delete-node/ &ipa_fw_mem; +/delete-node/ &remoteproc_mpss; +/delete-node/ &rmtfs_mem; +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &video_mem; +/delete-node/ &wlan_ce_mem; +/delete-node/ &wpss_mem; +/delete-node/ &xbl_mem; + +/ { + model = "Qualcomm Technologies, Inc. Robotics RB3gen2"; + compatible = "qcom,qcs6490-rb3gen2", "qcom,qcm6490"; + chassis-type = "embedded"; + + aliases { + serial0 = &uart5; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + xbl_mem: xbl@80700000 { + reg = <0x0 0x80700000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap_mem: cdsp-secure-heap@81800000 { + reg = <0x0 0x81800000 0x0 0x1e00000>; + no-map; + }; + + camera_mem: camera@84300000 { + reg = <0x0 0x84300000 0x0 0x500000>; + no-map; + }; + + wpss_mem: wpss@84800000 { + reg = <0x0 0x84800000 0x0 0x1900000>; + no-map; + }; + + adsp_mem: adsp@86100000 { + reg = <0x0 0x86100000 0x0 0x2800000>; + no-map; + }; + + cdsp_mem: cdsp@88900000 { + reg = <0x0 0x88900000 0x0 0x1e00000>; + no-map; + }; + + video_mem: video@8a700000 { + reg = <0x0 0x8a700000 0x0 0x700000>; + no-map; + }; + + cvp_mem: cvp@8ae00000 { + reg = <0x0 0x8ae00000 0x0 0x500000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b300000 { + reg = <0x0 0x8b300000 0x0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@8b310000 { + reg = <0x0 0x8b310000 0x0 0xa000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8b31a000 { + reg = <0x0 0x8b31a000 0x0 0x2000>; + no-map; + }; + + tz_stat_mem: tz-stat@c0000000 { + reg = <0x0 0xc0000000 0x0 0x100000>; + no-map; + }; + + tags_mem: tags@c0100000 { + reg = <0x0 0xc0100000 0x0 0x1200000>; + no-map; + }; + + qtee_mem: qtee@c1300000 { + reg = <0x0 0xc1300000 0x0 0x500000>; + no-map; + }; + + trusted_apps_mem: trusted_apps@c1800000 { + reg = <0x0 0xc1800000 0x0 0x1c00000>; + no-map; + }; + + debug_vm_mem: debug-vm@d0600000 { + reg = <0x0 0xd0600000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <4350000>; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>; + vdd-l2-l7-supply = <&vreg_bob_3p296>; + vdd-l3-supply = <&vreg_s2b_0p876>; + vdd-l5-supply = <&vreg_s2b_0p876>; + vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>; + vdd-l8-supply = <&vreg_s7b_0p972>; + vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>; + vdd-l13-supply = <&vreg_s7b_0p972>; + vdd-l14-l16-supply = <&vreg_s8b_1p272>; + + vreg_s1b_1p872: smps1 { + regulator-min-microvolt = <1840000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s2b_0p876: smps2 { + regulator-min-microvolt = <570070>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7b_0p972: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p272: smps8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>; + }; + + vreg_l1b_0p912: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p072: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b_0p504: ldo3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <910000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_0p752: ldo4 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <820000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + reg_l5b_0p752: ldo5 { + regulator-min-microvolt = <552000>; + regulator-max-microvolt = <832000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p952: ldo7 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_0p904: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p504: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_0p751: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_0p53: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_1p08: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_0p765: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_1p1: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_1p7: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1b_1p872>; + vdd-l2-l8-supply = <&vreg_s1b_1p872>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>; + vdd-l6-l9-l11-supply = <&vreg_bob_3p296>; + vdd-l10-supply = <&vreg_s7b_0p972>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s1c_2p19: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s2c_0p752: smps2 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s5c_0p752: smps5 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_s7c_0p752: smps7 { + regulator-min-microvolt = <465000>; + regulator-max-microvolt = <800000>; + }; + + vreg_s9c_1p084: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_1p62: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_2p8: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4c_1p62: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5c_1p62: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p96: ldo6 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p62: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p96: ldo9 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <35440000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_0p88: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c_1p65: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c_2p7: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob_3p296: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <32 2>, /* ADSP */ + <48 4>; /* NFC */ +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l10c_0p88>; + vdda33-supply = <&vreg_l2b_3p072>; + vdda18-supply = <&vreg_l1c_1p8>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p912>; + + status = "okay"; +}; + +&wifi { + memory-region = <&wlan_fw_mem>; +}; diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi index 1c0e5d271e91..832f472c4b7a 100644 --- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi @@ -381,6 +381,20 @@ #power-domain-cells = <1>; }; + ecpricc: clock-controller@280000 { + compatible = "qcom,qdu1000-ecpricc"; + reg = <0x0 0x00280000 0x0 0x31c00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_ECPRI_CC_GPLL0_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL3_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL4_CLK_SRC>, + <&gcc GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + gpi_dma0: dma-controller@900000 { compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; reg = <0x0 0x900000 0x0 0x60000>; @@ -1446,13 +1460,10 @@ system-cache-controller@19200000 { compatible = "qcom,qdu1000-llcc"; reg = <0 0x19200000 0 0xd80000>, - <0 0x1a200000 0 0x80000>, - <0 0x221c8128 0 0x4>; - reg-names = "llcc_base", - "llcc_broadcast_base", - "multi_channel_register"; + <0 0x1a200000 0 0x80000>; + reg-names = "llcc0_base", + "llcc_broadcast_base"; interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; - multi-ch-bit-off = <24 2>; }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts index 94885b9c21c8..aa53b6af6d9c 100644 --- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts @@ -23,6 +23,14 @@ stdout-path = "serial0:115200n8"; }; + clocks { + clk40M: can-clk { + compatible = "fixed-clock"; + clock-frequency = <40000000>; + #clock-cells = <0>; + }; + }; + gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -40,6 +48,17 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -158,6 +177,68 @@ }; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + lt9611_codec: hdmi-bridge@2b { + compatible = "lontium,lt9611uxc"; + reg = <0x2b>; + interrupts-extended = <&tlmm 46 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_hdmi_out_1p2>; + vcc-supply = <<9611_3v3>; + + pinctrl-0 = <<9611_irq_pin <9611_rst_pin>; + pinctrl-names = "default"; + #sound-dai-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm2250_l5>; + status = "okay"; +}; + +&mdss_dsi0_out { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + status = "okay"; +}; + &pm2250_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; @@ -376,7 +457,34 @@ status = "okay"; }; +&spi5 { + status = "okay"; + + can@0 { + compatible = "microchip,mcp2518fd"; + reg = <0>; + interrupts-extended = <&tlmm 39 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk40M>; + spi-max-frequency = <10000000>; + vdd-supply = <&vdc_5v>; + xceiver-supply = <&vdc_5v>; + }; +}; + &tlmm { + lt9611_rst_pin: lt9611-rst-state { + pins = "gpio41"; + function = "gpio"; + input-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio46"; + function = "gpio"; + bias-disable; + }; + sd_det_in_on: sd-det-in-on-state { pins = "gpio88"; function = "gpio"; @@ -415,6 +523,10 @@ status = "okay"; }; +&usb_dwc3 { + dr_mode = "host"; +}; + &usb_hsphy { vdd-supply = <&pm2250_l12>; vdda-pll-supply = <&pm2250_l13>; @@ -427,6 +539,7 @@ vdd-1.8-xo-supply = <&pm2250_l13>; vdd-1.3-rfa-supply = <&pm2250_l10>; vdd-3.3-ch0-supply = <&pm2250_l22>; + qcom,ath10k-calibration-variant = "Thundercomm_RB1"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts index a7278a9472ed..7c19f874fa71 100644 --- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts +++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts @@ -15,6 +15,7 @@ aliases { serial0 = &uart4; + serial1 = &uart3; }; chosen { @@ -280,6 +281,12 @@ status = "okay"; }; +&remoteproc_mpss { + firmware-name = "qcom/qrb4210/modem.mbn"; + + status = "okay"; +}; + &rpm_requests { regulators { compatible = "qcom,rpm-pm6125-regulators"; @@ -346,13 +353,14 @@ }; vreg_l8a_0p664: l8 { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <728000>; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <640000>; }; vreg_l9a_1p8: l9 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2000000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; }; vreg_l10a_1p8: l10 { @@ -389,11 +397,13 @@ vreg_l16a_1p3: l16 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1904000>; + regulator-allow-set-load; }; vreg_l17a_1p3: l17 { regulator-min-microvolt = <1152000>; regulator-max-microvolt = <1384000>; + regulator-allow-set-load; }; vreg_l18a_1p232: l18 { @@ -424,8 +434,9 @@ }; vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3400000>; + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + regulator-allow-set-load; }; vreg_l24a_2p96: l24 { @@ -487,6 +498,66 @@ <56 3>, <61 2>, <64 1>, <68 1>, <72 8>, <96 1>; + uart3_default: uart3-default-state { + cts-pins { + pins = "gpio8"; + function = "qup3"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio10"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart3_sleep: uart3-sleep-state { + cts-pins { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + tx-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + rx-pins { + pins = "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + lt9611_rst_pin: lt9611-rst-state { pins = "gpio41"; function = "gpio"; @@ -508,6 +579,26 @@ }; }; +&uart3 { + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 11 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&uart3_default>; + pinctrl-1 = <&uart3_sleep>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3988-bt"; + + vddio-supply = <&vreg_l9a_1p8>; + vddxo-supply = <&vreg_l16a_1p3>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l23a_3p3>; + enable-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>; + max-speed = <3200000>; + }; +}; + &uart4 { status = "okay"; }; @@ -518,7 +609,6 @@ &usb_dwc3 { maximum-speed = "super-speed"; - dr_mode = "peripheral"; }; &usb_hsphy { @@ -536,6 +626,16 @@ status = "okay"; }; +&wifi { + vdd-0.8-cx-mx-supply = <&vreg_l8a_0p664>; + vdd-1.8-xo-supply = <&vreg_l16a_1p3>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l23a_3p3>; + qcom,ath10k-calibration-variant = "Thundercomm_RB2"; + + status = "okay"; +}; + &xo_board { clock-frequency = <19200000>; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts index bb149e577914..edc0e42ee017 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts @@ -46,7 +46,7 @@ assigned-clocks = <&camcc CAM_CC_MCLK2_CLK>; assigned-clock-rates = <24000000>; - dovdd-supply = <&vreg_l7f_1p8>; + dovdd-supply = <&vreg_l7f_1p8>; avdd-supply = <&vdc_5v>; dvdd-supply = <&vdc_5v>; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index c8cd40a462a3..043184557873 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -23,6 +23,7 @@ aliases { serial0 = &uart12; + serial1 = &uart6; sdhc2 = &sdhc_2; }; @@ -64,8 +65,8 @@ function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; default-state = "off"; + panic-indicator; }; led-wlan { @@ -1263,6 +1264,14 @@ "HST_WLAN_UART_TX", "HST_WLAN_UART_RX"; + bt_en_state: bt-default-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + output-low; + bias-pull-up; + }; + lt9611_irq_pin: lt9611-irq-state { pins = "gpio63"; function = "gpio"; @@ -1296,6 +1305,26 @@ }; }; +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,qca6390-bt"; + + pinctrl-names = "default"; + pinctrl-0 = <&bt_en_state>; + + enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_s4a_1p8>; + vddpmu-supply = <&vreg_s2f_0p95>; + vddaon-supply = <&vreg_s6a_0p95>; + vddrfa0p9-supply = <&vreg_s2f_0p95>; + vddrfa1p3-supply = <&vreg_s8c_1p3>; + vddrfa1p9-supply = <&vreg_s5a_1p9>; + }; +}; + &uart12 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts index 9760bb4b468c..26ad05bd3b3f 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts @@ -461,6 +461,11 @@ "ANALOG_PON_OPT"; }; +&pmm8654au_0_pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + &pmm8654au_1_gpios { gpio-line-names = "PMIC_C_ID0", "PMIC_C_ID1", diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi index b6a93b11cbbd..a7eaca33d326 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi @@ -1487,6 +1487,11 @@ }; }; + rng: rng@10d2000 { + compatible = "qcom,sa8775p-trng", "qcom,trng"; + reg = <0 0x010d2000 0 0x1000>; + }; + ufs_mem_hc: ufs@1d84000 { compatible = "qcom,sa8775p-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0x0 0x01d84000 0x0 0x3000>; @@ -1610,8 +1615,8 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_EDGE_RISING>, - <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, <&pdc 12 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", "dp_hs_phy_irq", @@ -1697,8 +1702,8 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 8 IRQ_TYPE_EDGE_RISING>, - <&pdc 7 IRQ_TYPE_EDGE_RISING>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 7 IRQ_TYPE_EDGE_BOTH>, <&pdc 13 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "pwr_event", "dp_hs_phy_irq", @@ -1760,8 +1765,8 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 10 IRQ_TYPE_EDGE_RISING>, - <&pdc 9 IRQ_TYPE_EDGE_RISING>; + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "pwr_event", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -1910,6 +1915,50 @@ interrupt-controller; }; + tsens2: thermal-sensor@c251000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c251000 0x0 0x1ff>, + <0x0 0x0c224000 0x0 0x8>; + interrupts = <GIC_SPI 572 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <13>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens3: thermal-sensor@c252000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c252000 0x0 0x1ff>, + <0x0 0x0c225000 0x0 0x8>; + interrupts = <GIC_SPI 573 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <13>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c263000 0x0 0x1ff>, + <0x0 0x0c222000 0x0 0x8>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <12>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sa8775p-tsens", "qcom,tsens-v2"; + reg = <0x0 0x0c265000 0x0 0x1ff>, + <0x0 0x0c223000 0x0 0x8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + #qcom,sensors = <12>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-management@c300000 { compatible = "qcom,sa8775p-aoss-qmp", "qcom,aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x400>; @@ -1920,6 +1969,11 @@ #clock-cells = <0>; }; + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0x0 0x0c3f0000 0x0 0x400>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x1100>, @@ -2181,7 +2235,7 @@ compatible = "qcom,apss-wdt-sa8775p", "qcom,kpss-wdt"; reg = <0x0 0x17c10000 0x0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; memtimer: timer@17c20000 { @@ -2401,6 +2455,1058 @@ }; }; + thermal-zones { + aoss-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-3-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + audio-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camss-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + pcie-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-0-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-0-3-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + gpuss-5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + camss-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + pcie-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-0-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss-2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-3-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-0-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-1-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-2-0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + ddrss-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-1-0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens2 12>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + aoss-3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 0>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 1>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 2>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 3>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpu-1-3-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 4>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 5>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 6>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-0-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 7>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-0-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 8>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-1-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 9>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + nsp-1-2-1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 10>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + ddrss-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 11>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + + cpuss-1-1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens3 12>; + + trips { + trip-point0 { + temperature = <105000>; + hysteresis = <5000>; + type = "passive"; + }; + + trip-point1 { + temperature = <115000>; + hysteresis = <5000>; + type = "passive"; + }; + }; + }; + }; + arch_timer: timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, @@ -2409,7 +3515,7 @@ <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; - pcie0: pci@1c00000{ + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sa8775p"; reg = <0x0 0x01c00000 0x0 0x3000>, <0x0 0x40000000 0x0 0xf20>, @@ -2509,7 +3615,7 @@ status = "disabled"; }; - pcie1: pci@1c10000{ + pcie1: pcie@1c10000 { compatible = "qcom,pcie-sa8775p"; reg = <0x0 0x01c10000 0x0 0x3000>, <0x0 0x60000000 0x0 0xf20>, diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts index dbb48934d499..5afcb8212f49 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts @@ -3,6 +3,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/qcom,q6asm.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sc7180.dtsi" @@ -129,6 +130,113 @@ pinctrl-names = "default"; }; + sound: sound { + compatible = "qcom,sc7180-qdsp6-sndcard"; + pinctrl-0 = <&pri_mi2s_active>, <&pri_mi2s_mclk_active>, <&ter_mi2s_active>; + pinctrl-names = "default"; + model = "Acer-Aspire-1"; + + audio-routing = + "Headphone Jack", "HPOL", + "Headphone Jack", "HPOR"; + + multimedia1-dai-link { + link-name = "MultiMedia1"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + multimedia2-dai-link { + link-name = "MultiMedia2"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + multimedia3-dai-link { + link-name = "MultiMedia3"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + multimedia4-dai-link { + link-name = "MultiMedia4"; + + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>; + }; + }; + + primary-rx-dai-link { + link-name = "Primary MI2S Playback"; + + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&alc5682 0>; + }; + }; + + primary-tx-dai-link { + link-name = "Primary MI2S Capture"; + + cpu { + sound-dai = <&q6afedai PRIMARY_MI2S_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&alc5682 0>; + }; + }; + + tertiary-rx-dai-link { + link-name = "Tertiary MI2S Playback"; + + cpu { + sound-dai = <&q6afedai TERTIARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&max98357a>; + }; + }; + + displayport-rx-dai-link { + link-name = "DisplayPort Playback"; + + cpu { + sound-dai = <&q6afedai DISPLAY_PORT_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + }; + reg_tp_3p3: touchpad-regulator { compatible = "regulator-fixed"; regulator-name = "tp_3p3"; @@ -209,9 +317,22 @@ AVDD-supply = <&vreg_l15a_1p8>; MICVDD-supply = <®_codec_3p3>; VBAT-supply = <®_codec_3p3>; + DBVDD-supply = <&vreg_l15a_1p8>; + LDO1-IN-supply = <&vreg_l15a_1p8>; + + /* + * NOTE: The board has a path from this codec to the + * DMIC microphones in the lid, however some of the option + * resistors are absent and the microphones are connected + * to the SoC instead. + * + * If the resistors were to be changed by the user to + * connect the codec, the following could be used: + * + * realtek,dmic1-data-pin = <1>; + * realtek,dmic1-clk-pin = <1>; + */ - realtek,dmic1-data-pin = <1>; - realtek,dmic1-clk-pin = <1>; realtek,jd-src = <1>; }; }; @@ -351,6 +472,49 @@ status = "disabled"; }; +&pm6150_rtc { + status = "okay"; +}; + +&q6afedai { + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; + + dai@17 { + reg = <PRIMARY_MI2S_TX>; + qcom,sd-lines = <0>; + }; + + dai@20 { + reg = <TERTIARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + + dai@104 { + reg = <DISPLAY_PORT_RX>; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + + dai@3 { + reg = <3>; + }; +}; + &qupv3_id_0 { status = "okay"; }; @@ -359,6 +523,12 @@ status = "okay"; }; +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc7180/acer/aspire1/qcadsp7180.mbn"; + status = "okay"; +}; + &remoteproc_mpss { firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn"; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index 0be62331f982..067813f5f437 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -141,7 +141,7 @@ ap_ts_pen_1v8: &i2c4 { }; &panel { - compatible = "kingdisplay,kd116n21-30nv-a010"; + compatible = "edp-panel"; }; &pen_insert { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index 11f353d416b4..4dcaa15caef2 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -2966,8 +2966,8 @@ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 8 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 9 IRQ_TYPE_LEVEL_HIGH>; + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -3100,8 +3100,12 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x800 0x2>; @@ -3576,7 +3580,7 @@ compatible = "qcom,apss-wdt-sc7180", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi index 5d462ae14ba1..c4d00a81da39 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi @@ -17,6 +17,9 @@ * required by the setup for Chrome boards. */ +/delete-node/ &cdsp_mem; +/delete-node/ &gpu_zap_mem; +/delete-node/ &gpu_zap_shader; /delete-node/ &hyp_mem; /delete-node/ &xbl_mem; /delete-node/ &reserved_xbl_uefi_log; @@ -24,11 +27,6 @@ / { reserved-memory { - adsp_mem: memory@86700000 { - reg = <0x0 0x86700000 0x0 0x2800000>; - no-map; - }; - camera_mem: memory@8ad00000 { reg = <0x0 0x8ad00000 0x0 0x500000>; no-map; @@ -38,11 +36,6 @@ reg = <0x0 0x8b200000 0x0 0x500000>; no-map; }; - - wpss_mem: memory@9ae00000 { - reg = <0x0 0x9ae00000 0x0 0x1900000>; - no-map; - }; }; }; @@ -94,9 +87,31 @@ }; }; +/* Currently not used */ +&remoteproc_cdsp { + /delete-property/ memory-region; +}; + &remoteproc_wpss { - status = "okay"; + compatible = "qcom,sc7280-wpss-pil"; + clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, + <&gcc GCC_WPSS_AHB_CLK>, + <&gcc GCC_WPSS_RSCP_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ahb_bdg", + "ahb", + "rscp", + "xo"; + + resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, + <&pdc_reset PDC_WPSS_SYNC_RESET>; + reset-names = "restart", "pdc_sync"; + + qcom,halt-regs = <&tcsr_1 0x17000>; + firmware-name = "ath11k/WCN6750/hw1.0/wpss.mdt"; + + status = "okay"; }; &scm { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi index 95505549adcc..b721a8546800 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-lte-sku.dtsi @@ -8,11 +8,6 @@ / { reserved-memory { - mpss_mem: memory@8b800000 { - reg = <0x0 0x8b800000 0x0 0xf600000>; - no-map; - }; - mba_mem: memory@9c700000 { reg = <0x0 0x9c700000 0x0 0x200000>; no-map; @@ -33,6 +28,8 @@ &remoteproc_mpss { compatible = "qcom,sc7280-mss-pil"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_OFFLINE_AXI_CLK>, diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi index 2febd6126d4c..3ebc915f0dc2 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-wifi-sku.dtsi @@ -7,5 +7,6 @@ /* WIFI SKUs save 256M by not having modem/mba/rmtfs memory regions defined. */ +/delete-node/ &mpss_mem; /delete-node/ &remoteproc_mpss; /delete-node/ &rmtfs_mem; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 2ff549f4dc7a..a0059527d9e4 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -499,6 +499,25 @@ status = "okay"; }; +&ufs_mem_hc { + reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l7b_2p9>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l9b_1p2>; + vccq-max-microamp = <900000>; + vccq2-supply = <&vreg_l9b_1p2>; + vccq2-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; + + status = "okay"; +}; + &usb_1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 66f1eb83cca7..83b5b76ba179 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7280.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -91,68 +92,93 @@ #size-cells = <2>; ranges; - wlan_ce_mem: memory@4cd000 { + wlan_ce_mem: wlan-ce@4cd000 { no-map; reg = <0x0 0x004cd000 0x0 0x1000>; }; - hyp_mem: memory@80000000 { + hyp_mem: hyp@80000000 { reg = <0x0 0x80000000 0x0 0x600000>; no-map; }; - xbl_mem: memory@80600000 { + xbl_mem: xbl@80600000 { reg = <0x0 0x80600000 0x0 0x200000>; no-map; }; - aop_mem: memory@80800000 { + aop_mem: aop@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; }; - aop_cmd_db_mem: memory@80860000 { + aop_cmd_db_mem: aop-cmd-db@80860000 { reg = <0x0 0x80860000 0x0 0x20000>; compatible = "qcom,cmd-db"; no-map; }; - reserved_xbl_uefi_log: memory@80880000 { + reserved_xbl_uefi_log: xbl-uefi-res@80880000 { reg = <0x0 0x80884000 0x0 0x10000>; no-map; }; - sec_apps_mem: memory@808ff000 { + sec_apps_mem: sec-apps@808ff000 { reg = <0x0 0x808ff000 0x0 0x1000>; no-map; }; - smem_mem: memory@80900000 { + smem_mem: smem@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; }; - cpucp_mem: memory@80b00000 { + cpucp_mem: cpucp@80b00000 { no-map; reg = <0x0 0x80b00000 0x0 0x100000>; }; - wlan_fw_mem: memory@80c00000 { + wlan_fw_mem: wlan-fw@80c00000 { reg = <0x0 0x80c00000 0x0 0xc00000>; no-map; }; - video_mem: memory@8b200000 { + adsp_mem: adsp@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + video_mem: video@8b200000 { reg = <0x0 0x8b200000 0x0 0x500000>; no-map; }; - ipa_fw_mem: memory@8b700000 { + cdsp_mem: cdsp@88f00000 { + reg = <0x0 0x88f00000 0x0 0x1e00000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; }; - rmtfs_mem: memory@9c900000 { + gpu_zap_mem: zap@8b71a000 { + reg = <0 0x8b71a000 0 0x2000>; + no-map; + }; + + mpss_mem: mpss@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: wpss@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + rmtfs_mem: rmtfs@9c900000 { compatible = "qcom,rmtfs-mem"; reg = <0x0 0x9c900000 0x0 0x280000>; no-map; @@ -906,7 +932,7 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, <0>, <&pcie1_phy>, - <0>, <0>, <0>, + <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe_clk", @@ -974,6 +1000,7 @@ bus-width = <8>; supports-cqe; + dma-coherent; qcom,dll-config = <0x0007642c>; qcom,ddr-config = <0x80040868>; @@ -2034,6 +2061,11 @@ }; }; + rng: rng@10d3000 { + compatible = "qcom,sc7280-trng", "qcom,trng"; + reg = <0 0x010d3000 0 0x1000>; + }; + cnoc2: interconnect@1500000 { reg = <0 0x01500000 0 0x1000>; compatible = "qcom,sc7280-cnoc2"; @@ -2126,7 +2158,7 @@ qcom,smem-state-names = "wlan-smp2p-out"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sc7280"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2233,6 +2265,99 @@ status = "disabled"; }; + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", + "jedec,ufs-2.0"; + reg = <0x0 0x01d84000 0x0 0x3000>; + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + lanes-per-direction = <2>; + #reset-cells = <1>; + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + power-domains = <&gcc GCC_UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x80 0x0>; + dma-coherent; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = + <75000000 300000000>, + <0 0>, + <0 0>, + <75000000 300000000>, + <0 0>, + <0 0>, + <0 0>, + <0 0>; + status = "disabled"; + }; + + ufs_mem_phy: phy@1d87000 { + compatible = "qcom,sc7280-qmp-ufs-phy"; + reg = <0x0 0x01d87000 0x0 0xe00>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, + <&gcc GCC_UFS_1_CLKREF_EN>; + clock-names = "ref", "ref_aux", "qref"; + + power-domains = <&rpmhpd SC7280_MX>; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0"; + reg = <0x0 0x01dc4000 0x0 0x28000>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + iommus = <&apps_smmu 0x4e4 0x0011>, + <&apps_smmu 0x4e6 0x0011>; + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sc7280-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0x0 0x01dfa000 0x0 0x6000>; + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x4e4 0x0011>, + <&apps_smmu 0x4e4 0x0011>; + interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "memory"; + }; + ipa: ipa@1e40000 { compatible = "qcom,sc7280-ipa"; @@ -2598,7 +2723,8 @@ "cx_mem", "cx_dbgc"; interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; - iommus = <&adreno_smmu 0 0x401>; + iommus = <&adreno_smmu 0 0x400>, + <&adreno_smmu 1 0x400>; operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; @@ -2608,6 +2734,10 @@ nvmem-cells = <&gpu_speed_bin>; nvmem-cell-names = "speed_bin"; + gpu_zap_shader: zap-shader { + memory-region = <&gpu_zap_mem>; + }; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; @@ -2615,14 +2745,14 @@ opp-hz = /bits/ 64 <315000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; opp-peak-kBps = <1804000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x07>; }; opp-450000000 { opp-hz = /bits/ 64 <450000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; opp-peak-kBps = <4068000>; - opp-supported-hw = <0x03>; + opp-supported-hw = <0x07>; }; /* Only applicable for SKUs which has 550Mhz as Fmax */ @@ -2637,28 +2767,28 @@ opp-hz = /bits/ 64 <550000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; opp-peak-kBps = <6832000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-608000000 { opp-hz = /bits/ 64 <608000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; opp-peak-kBps = <8368000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-700000000 { opp-hz = /bits/ 64 <700000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; opp-peak-kBps = <8532000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-812000000 { opp-hz = /bits/ 64 <812000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; opp-peak-kBps = <8532000>; - opp-supported-hw = <0x02>; + opp-supported-hw = <0x06>; }; opp-840000000 { @@ -2772,12 +2902,12 @@ "gpu_cc_hub_aon_clk"; power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; }; remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sc7280-mpss-pas"; - reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; + reg = <0 0x04080000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, @@ -3329,6 +3459,7 @@ operating-points-v2 = <&sdhc2_opp_table>; bus-width = <4>; + dma-coherent; qcom,dll-config = <0x0007642c>; @@ -3399,6 +3530,32 @@ #clock-cells = <1>; #phy-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2: usb@8cf8800 { @@ -3426,8 +3583,8 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 12 IRQ_TYPE_EDGE_RISING>, - <&pdc 13 IRQ_TYPE_EDGE_RISING>; + <&pdc 12 IRQ_TYPE_EDGE_BOTH>, + <&pdc 13 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq"; @@ -3479,8 +3636,77 @@ status = "disabled"; }; + remoteproc_adsp: remoteproc@3700000 { + compatible = "qcom,sc7280-adsp-pas"; + reg = <0 0x03700000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_LCX>, + <&rpmhpd SC7280_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + remoteproc_wpss: remoteproc@8a00000 { - compatible = "qcom,sc7280-wpss-pil"; + compatible = "qcom,sc7280-wpss-pas"; reg = <0 0x08a00000 0 0x10000>; interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>, @@ -3492,12 +3718,8 @@ interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack", "shutdown-ack"; - clocks = <&gcc GCC_WPSS_AHB_BDG_MST_CLK>, - <&gcc GCC_WPSS_AHB_CLK>, - <&gcc GCC_WPSS_RSCP_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "ahb_bdg", "ahb", - "rscp", "xo"; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; power-domains = <&rpmhpd SC7280_CX>, <&rpmhpd SC7280_MX>; @@ -3510,11 +3732,6 @@ qcom,smem-states = <&wpss_smp2p_out 0>; qcom,smem-state-names = "stop"; - resets = <&aoss_reset AOSS_CC_WCSS_RESTART>, - <&pdc_reset PDC_WPSS_SYNC_RESET>; - reset-names = "restart", "pdc_sync"; - - qcom,halt-regs = <&tcsr_1 0x17000>; status = "disabled"; @@ -3656,6 +3873,144 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + remoteproc_cdsp: remoteproc@a300000 { + compatible = "qcom,sc7280-cdsp-pas"; + reg = <0 0x0a300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MX>; + power-domain-names = "cx", "mx"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x11a1 0x0420>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x11a2 0x0420>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x11a3 0x0420>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x11a4 0x0420>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x11a5 0x0420>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x11a6 0x0420>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x11a7 0x0420>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x11a8 0x0420>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + + compute-cb@11 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <11>; + iommus = <&apps_smmu 0x11ab 0x0420>, + <&apps_smmu 0x118b 0x0420>; + }; + + compute-cb@12 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <12>; + iommus = <&apps_smmu 0x11ac 0x0420>, + <&apps_smmu 0x118c 0x0420>; + }; + + compute-cb@13 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <13>; + iommus = <&apps_smmu 0x11ad 0x0420>, + <&apps_smmu 0x118d 0x0420>; + }; + + compute-cb@14 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <14>; + iommus = <&apps_smmu 0x11ae 0x0420>, + <&apps_smmu 0x118e 0x0420>; + }; + }; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sc7280-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -3681,9 +4036,9 @@ assigned-clock-rates = <19200000>, <200000000>; interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 14 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, <&pdc 15 IRQ_TYPE_EDGE_BOTH>, - <&pdc 17 IRQ_TYPE_EDGE_BOTH>; + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", "dm_hs_phy_irq", @@ -3793,6 +4148,86 @@ #power-domain-cells = <1>; }; + cci0: cci@ac4a000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4a000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci0_default &cci1_default>; + pinctrl-1 = <&cci0_sleep &cci1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac4b000 { + compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4b000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + pinctrl-0 = <&cci2_default &cci3_default>; + pinctrl-1 = <&cci2_sleep &cci3_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sc7280-camcc"; reg = <0 0x0ad00000 0 0x10000>; @@ -3847,8 +4282,12 @@ interrupt-controller; #interrupt-cells = <1>; - interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>; - interconnect-names = "mdp0-mem"; + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc2 SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; iommus = <&apps_smmu 0x900 0x402>; @@ -4298,6 +4737,62 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; + cci0_default: cci0-default-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_sleep: cci0-sleep-state { + pins = "gpio69", "gpio70"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_default: cci1-default-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_sleep: cci1-sleep-state { + pins = "gpio71", "gpio72"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci2_default: cci2-default-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci2_sleep: cci2-sleep-state { + pins = "gpio73", "gpio74"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci3_default: cci3-default-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci3_sleep: cci3-sleep-state { + pins = "gpio75", "gpio76"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + dp_hot_plug_det: dp-hot-plug-det-state { pins = "gpio47"; function = "dp_hot"; @@ -5222,7 +5717,7 @@ compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; status = "reserved"; /* Owned by Gunyah hyp */ }; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts index 3ea07d094b60..0c22f3efec20 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -452,8 +452,8 @@ }; &pcie3 { - perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 180 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&pcie3_default_state>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index fd2fab4895b3..bfee60c93ccc 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -43,7 +43,7 @@ pinctrl-0 = <&hall_int_active_state>; lid-switch { - gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; linux,input-type = <EV_SW>; linux,code = <SW_LID>; wakeup-source; @@ -386,12 +386,18 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l10e_2p9: ldo10 { regulator-min-microvolt = <2904000>; regulator-max-microvolt = <2904000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; }; vreg_l12e: ldo12 { @@ -531,8 +537,8 @@ }; &pcie1 { - perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie2_default_state>; diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi index a34f438ef2d9..0430d99091e3 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sc8180x.h> #include <dt-bindings/clock/qcom,gpucc-sm8150.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8180x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -1684,7 +1685,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1736,7 +1737,6 @@ assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d80 0x1>, <0x100 &apps_smmu 0x1d81 0x1>; @@ -1751,6 +1751,7 @@ phys = <&pcie0_phy>; phy-names = "pciephy"; + dma-coherent; status = "disabled"; }; @@ -1761,7 +1762,7 @@ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE1_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE0_PHY_REFGEN_CLK>, <&gcc GCC_PCIE_0_PIPE_CLK>; clock-names = "aux", "cfg_ahb", @@ -1781,7 +1782,7 @@ status = "disabled"; }; - pcie3: pci@1c08000 { + pcie3: pcie@1c08000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -1833,7 +1834,6 @@ assigned-clocks = <&gcc GCC_PCIE_3_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1e00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1e00 0x1>, <0x100 &apps_smmu 0x1e01 0x1>; @@ -1848,6 +1848,7 @@ phys = <&pcie3_phy>; phy-names = "pciephy"; + dma-coherent; status = "disabled"; }; @@ -1858,7 +1859,7 @@ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_3_CFG_AHB_CLK>, <&gcc GCC_PCIE_3_CLKREF_CLK>, - <&gcc GCC_PCIE2_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE3_PHY_REFGEN_CLK>, <&gcc GCC_PCIE_3_PIPE_CLK>; clock-names = "aux", "cfg_ahb", @@ -1879,7 +1880,7 @@ status = "disabled"; }; - pcie1: pci@1c10000 { + pcie1: pcie@1c10000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c10000 0 0x3000>, <0 0x68000000 0 0xf1d>, @@ -1931,7 +1932,6 @@ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1c80 0x7f>; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; @@ -1946,6 +1946,7 @@ phys = <&pcie1_phy>; phy-names = "pciephy"; + dma-coherent; status = "disabled"; }; @@ -1977,7 +1978,7 @@ status = "disabled"; }; - pcie2: pci@1c18000 { + pcie2: pcie@1c18000 { compatible = "qcom,pcie-sc8180x"; reg = <0 0x01c18000 0 0x3000>, <0 0x70000000 0 0xf1d>, @@ -2029,7 +2030,6 @@ assigned-clocks = <&gcc GCC_PCIE_2_AUX_CLK>; assigned-clock-rates = <19200000>; - iommus = <&apps_smmu 0x1d00 0x7f>; iommu-map = <0x0 &apps_smmu 0x1d00 0x1>, <0x100 &apps_smmu 0x1d01 0x1>; @@ -2044,6 +2044,7 @@ phys = <&pcie2_phy>; phy-names = "pciephy"; + dma-coherent; status = "disabled"; }; @@ -2062,7 +2063,7 @@ "refgen", "pipe"; #clock-cells = <0>; - clock-output-names = "pcie_3_pipe_clk"; + clock-output-names = "pcie_2_pipe_clk"; #phy-cells = <0>; @@ -2114,6 +2115,14 @@ <0 0>, <0 0>; + power-domains = <&gcc UFS_PHY_GDSC>; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_0_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", "cpu-ufs"; + status = "disabled"; }; @@ -2548,10 +2557,10 @@ usb_prim: usb@a6f8800 { compatible = "qcom,sc8180x-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", @@ -2622,10 +2631,10 @@ "xo"; resets = <&gcc GCC_USB30_SEC_BCR>; power-domains = <&gcc USB30_SEC_GDSC>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -2704,11 +2713,15 @@ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, - <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + <&dispcc DISP_CC_MDSS_VSYNC_CLK>, + <&dispcc DISP_CC_MDSS_ROT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>; clock-names = "iface", "bus", "core", - "vsync"; + "vsync", + "rot", + "lut"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>; @@ -3117,8 +3130,6 @@ phys = <&edp_phy>; phy-names = "dp"; - #sound-dai-cells = <0>; - operating-points-v2 = <&edp_opp_table>; power-domains = <&rpmhpd SC8180X_MMCX>; @@ -3418,10 +3429,12 @@ reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; }; apss_shared: mailbox@17c00000 { - compatible = "qcom,sc8180x-apss-shared"; + compatible = "qcom,sc8180x-apss-shared", "qcom,sdm845-apss-shared"; reg = <0x0 0x17c00000 0x0 0x1000>; #mbox-cells = <1>; }; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts index e4861c61a65b..ffc4406422ae 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -458,6 +458,8 @@ }; &mdss0_dp3_phy { + compatible = "qcom,sc8280xp-edp-phy"; + vdda-phy-supply = <&vreg_l6b>; vdda-pll-supply = <&vreg_l3b>; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts index 38edaf51aa34..def3976bd5bb 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts @@ -82,6 +82,9 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&cam_indicator_en>; + led-camera-indicator { label = "white:camera-indicator"; function = LED_FUNCTION_INDICATOR; @@ -570,6 +573,7 @@ &mdss0_dp3 { compatible = "qcom,sc8280xp-edp"; + /delete-property/ #sound-dai-cells; data-lanes = <0 1 2 3>; @@ -601,6 +605,7 @@ }; &mdss0_dp3_phy { + compatible = "qcom,sc8280xp-edp-phy"; vdda-phy-supply = <&vreg_l6b>; vdda-pll-supply = <&vreg_l3b>; @@ -1277,6 +1282,13 @@ }; }; + cam_indicator_en: cam-indicator-en-state { + pins = "gpio28"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + edp_reg_en: edp-reg-en-state { pins = "gpio25"; function = "gpio"; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index cad59af7ccef..febf28356ff8 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> #include <dt-bindings/clock/qcom,gpucc-sc8280xp.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sc8280xp-camcc.h> #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h> #include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc8280xp.h> @@ -2731,7 +2732,7 @@ status = "disabled"; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03210000 0 0x2000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2807,7 +2808,7 @@ status = "disabled"; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.6.0"; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2844,7 +2845,7 @@ #reset-cells = <1>; }; - swr2: soundwire-controller@3330000 { + swr2: soundwire@3330000 { compatible = "qcom,soundwire-v1.6.0"; reg = <0 0x03330000 0 0x2000>; interrupts = <GIC_SPI 959 IRQ_TYPE_LEVEL_HIGH>, @@ -3450,6 +3451,20 @@ }; }; + camcc: clock-controller@ad00000 { + compatible = "qcom,sc8280xp-camcc"; + reg = <0 0x0ad00000 0 0x20000>; + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + power-domains = <&rpmhpd SC8280XP_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + mdss0: display-subsystem@ae00000 { compatible = "qcom,sc8280xp-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -4030,6 +4045,7 @@ sram@c3f0000 { compatible = "qcom,rpmh-stats"; reg = <0 0x0c3f0000 0 0x400>; + qcom,qmp = <&aoss_qmp>; }; spmi_bus: spmi@c440000 { @@ -4225,7 +4241,7 @@ compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts index 301eca9a4f31..057579ae3013 100644 --- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts +++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts @@ -80,6 +80,10 @@ }; }; +&lpass { + status = "okay"; +}; + &pm8953_resin { status = "okay"; linux,code = <KEY_VOLUMEDOWN>; @@ -239,3 +243,18 @@ &usb3_dwc3 { dr_mode = "peripheral"; }; + +&wcnss { + status = "okay"; + + vddpx-supply = <&pm8953_l5>; +}; + +&wcnss_iris { + compatible = "qcom,wcn3680"; + + vddxo-supply = <&pm8953_l7>; + vddrfa-supply = <&pm8953_l19>; + vddpa-supply = <&pm8953_l9>; + vdddig-supply = <&pm8953_l5>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm670.dtsi b/arch/arm64/boot/dts/qcom/sdm670.dtsi index ba2043d67370..4d7b77a23159 100644 --- a/arch/arm64/boot/dts/qcom/sdm670.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm670.dtsi @@ -6,6 +6,7 @@ * Copyright (c) 2022, Richard Acayan. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/dma/qcom-gpi.h> @@ -400,6 +401,30 @@ }; }; + dsi_opp_table: opp-table-dsi { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -1295,10 +1320,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -1353,6 +1378,273 @@ #interrupt-cells = <4>; }; + mdss: display-subsystem@ae00000 { + compatible = "qcom,sdm670-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + power-domains = <&dispcc MDSS_GDSC>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "core"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>, + <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + iommus = <&apps_smmu 0x880 0x8>, + <&apps_smmu 0xc80 0x8>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sdm670-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "gcc-bus", "iface", "bus", "core", "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sdm670-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94a00 0 0x1e0>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sdm670-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM670_CX>; + + phys = <&mdss_dsi1_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0 0x0ae96400 0 0x200>, + <0 0x0ae96600 0 0x280>, + <0 0x0ae96a00 0 0x10e>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0 0x0af00000 0 0x10000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_DISP_GPLL0_CLK_SRC>, + <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <0>, + <0>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk_src", + "gcc_disp_gpll0_div_clk_src", + "dsi0_phy_pll_out_byteclk", + "dsi0_phy_pll_out_dsiclk", + "dsi1_phy_pll_out_byteclk", + "dsi1_phy_pll_out_dsiclk", + "dp_link_clk_divsel_ten", + "dp_vco_divided_clk_src_mux"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; @@ -1532,7 +1824,7 @@ }; cpufreq_hw: cpufreq@17d43000 { - compatible = "qcom,cpufreq-hw"; + compatible = "qcom,sdm670-cpufreq-hw", "qcom,cpufreq-hw"; reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index c7eba6c491be..ab6220456513 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -67,8 +67,8 @@ function = LED_FUNCTION_INDICATOR; color = <LED_COLOR_ID_GREEN>; gpios = <&pm8998_gpios 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; default-state = "off"; + panic-indicator; }; led-1 { @@ -1130,7 +1130,7 @@ vdd-rx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>; - swm: swm@c85 { + swm: soundwire@c85 { left_spkr: speaker@0,1 { compatible = "sdw10217201000"; reg = <0 1>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index b523b5fff702..e821103d49c0 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -8,6 +8,7 @@ /dts-v1/; #include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> @@ -484,6 +485,28 @@ status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + &q6afedai { qi2s@22 { reg = <22>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi index c15d48860646..6172cd1539e6 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi @@ -54,7 +54,7 @@ reg = <0x42 0x2>; }; - swm: swm@c85 { + swm: soundwire@c85 { compatible = "qcom,soundwire-v1.3.0"; reg = <0xc85 0x40>; interrupts-extended = <&wcd9340 20>; diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi index 93b1582e807d..617b17b2d7d9 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi @@ -355,6 +355,28 @@ status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + }; +}; + &pm8998_resin { linux,code = <KEY_VOLUMEDOWN>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index bf5e6eb9d313..c2244824355a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -2306,7 +2306,7 @@ }; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sdm845"; reg = <0 0x01c00000 0 0x2000>, <0 0x60000000 0 0xf1d>, @@ -2405,7 +2405,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sdm845"; reg = <0 0x01c08000 0 0x2000>, <0 0x40000000 0 0xf1d>, @@ -2565,7 +2565,7 @@ <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; power-domains = <&gcc UFS_PHY_GDSC>; @@ -2595,30 +2595,50 @@ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; - freq-table-hz = - <50000000 200000000>, - <0 0>, - <0 0>, - <37500000 150000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>, - <75000000 300000000>; + + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mem_noc SLAVE_EBI1 0>, <&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>; interconnect-names = "ufs-ddr", "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <150000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sdm845-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, @@ -2626,16 +2646,9 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x108>, - <0 0x01d87600 0 0x1e0>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x108>, - <0 0x01d87a00 0 0x1e0>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -3545,11 +3558,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; + port { etf_in: endpoint { remote-endpoint = <&merge_funnel_out>; @@ -4000,33 +4010,28 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sdm845-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x18c>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x128>, - <0 0x088eb400 0 0x1fc>, - <0 0x088eb800 0 0x218>, - <0 0x088eb600 0 0x70>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; usb_1: usb@a6f8800 { @@ -4053,10 +4058,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -4104,10 +4109,10 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <150000000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc_intc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc_intc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -4126,7 +4131,7 @@ iommus = <&apps_smmu 0x760 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -5088,7 +5093,7 @@ compatible = "qcom,apss-wdt-sdm845", "qcom,kpss-wdt"; reg = <0 0x17980000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; apss_shared: mailbox@17990000 { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 92a812b5f423..47dc42f6e936 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -392,6 +392,8 @@ hid-descr-addr = <0x20>; interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_HIGH>; + + wakeup-source; }; }; @@ -408,6 +410,8 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c5_hid_active>; + + wakeup-source; }; }; @@ -482,6 +486,8 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c11_hid_active>; + + wakeup-source; }; }; @@ -797,7 +803,7 @@ qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - swm: swm@c85 { + swm: soundwire@c85 { left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts index 543837316001..26217836c270 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts @@ -658,7 +658,7 @@ qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; - swm: swm@c85 { + swm: soundwire@c85 { left_spkr: speaker@0,3 { compatible = "sdw10217211000"; reg = <0 3>; diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index a14e0650c4a8..f76e72fb2072 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -250,6 +250,11 @@ stdout-path = "serial0:115200n8"; }; +&pm7550ba_eusb2_repeater { + vdd18-supply = <&vreg_l5b_1p776>; + vdd3-supply = <&vreg_l10b_3p08>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -261,3 +266,27 @@ &uart1 { status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4b_0p88>; + vdda12-supply = <&vreg_l1b_1p2>; + + phys = <&pm7550ba_eusb2_repeater>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi index e180aa4023ec..7dbdf8ca6de6 100644 --- a/arch/arm64/boot/dts/qcom/sdx75.dtsi +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi @@ -8,6 +8,8 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sdx75-gcc.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,sdx75.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom,rpmhpd.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -203,6 +205,19 @@ }; }; + clk_virt: interconnect-0 { + compatible = "qcom,sdx75-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + clocks = <&rpmhcc RPMH_QPIC_CLK>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sdx75-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x0>; @@ -434,6 +449,9 @@ clock-names = "m-ahb", "s-ahb"; iommus = <&apps_smmu 0xe3 0x0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; #address-cells = <2>; #size-cells = <2>; ranges; @@ -444,6 +462,12 @@ reg = <0x0 0x00984000 0x0 0x4000>; clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; clock-names = "se"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; pinctrl-0 = <&qupv3_se1_2uart_active>; pinctrl-1 = <&qupv3_se1_2uart_sleep>; @@ -453,12 +477,144 @@ }; }; + usb_hsphy: phy@ff4000 { + compatible = "qcom,sdx75-snps-eusb2-phy", "qcom,sm8550-snps-eusb2-phy"; + reg = <0x0 0x00ff4000 0x0 0x154>; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_BCR>; + + status = "disabled"; + }; + + usb_qmpphy: phy@ff6000 { + compatible = "qcom,sdx75-qmp-usb3-uni-phy"; + reg = <0x0 0x00ff6000 0x0 0x2000>; + + clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, + <&gcc GCC_USB2_CLKREF_EN>, + <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, + <&gcc GCC_USB3_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "cfg_ahb", + "pipe"; + + power-domains = <&gcc GCC_USB3_PHY_GDSC>; + + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; + reset-names = "phy", + "phy_phy"; + + #clock-cells = <0>; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + system_noc: interconnect@1640000 { + compatible = "qcom,sdx75-system-noc"; + reg = <0x0 0x01640000 0x0 0x4b400>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + pcie_anoc: interconnect@16c0000 { + compatible = "qcom,sdx75-pcie-anoc"; + reg = <0x0 0x016c0000 0x0 0x14200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; #hwlock-cells = <1>; }; + usb: usb@a6f8800 { + compatible = "qcom,sdx75-dwc3", "qcom,dwc3"; + reg = <0x0 0x0a6f8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_USB30_MSTR_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 9 IRQ_TYPE_EDGE_RISING>, + <&pdc 10 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + power-domains = <&gcc GCC_USB30_GDSC>; + + resets = <&gcc GCC_USB30_BCR>; + + interconnects = <&system_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &system_noc SLAVE_USB3 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "usb-ddr", + "apps-usb"; + + status = "disabled"; + + usb_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0x0 0x0a600000 0x0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&apps_smmu 0x80 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_hsphy>, + <&usb_qmpphy>; + phy-names = "usb2-phy", + "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + pdc: interrupt-controller@b220000 { compatible = "qcom,sdx75-pdc", "qcom,pdc"; reg = <0x0 0xb220000 0x0 0x30000>, @@ -733,6 +889,20 @@ #freq-domain-cells = <1>; #clock-cells = <1>; }; + + dc_noc: interconnect@190e0000 { + compatible = "qcom,sdx75-dc-noc"; + reg = <0x0 0x190e0000 0x0 0x8200>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + gem_noc: interconnect@19100000 { + compatible = "qcom,sdx75-gem-noc"; + reg = <0x0 0x19100000 0x0 0x34080>; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts index 00a1c81ca397..866e93783590 100644 --- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts @@ -10,9 +10,23 @@ model = "Qualcomm Technologies, Inc. SM4450 QRD"; compatible = "qcom,sm4450-qrd", "qcom,sm4450"; - aliases { }; + aliases { + serial0 = &uart7; + }; chosen { - bootargs = "console=hvc0"; + stdout-path = "serial0:115200n8"; }; }; + +&qupv3_id_0 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; /* NFC eSE SPI */ +}; + +&uart7 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi index c4e5b33f5169..3e7ae3bebbe0 100644 --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi @@ -3,8 +3,11 @@ * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. */ +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm4450-gcc.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> / { interrupt-parent = <&intc>; @@ -328,6 +331,18 @@ }; }; + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + aop_cmd_db_mem: cmd-db@80860000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x80860000 0x0 0x20000>; + no-map; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -335,6 +350,43 @@ dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; + gcc: clock-controller@100000 { + compatible = "qcom,sm4450-gcc"; + reg = <0x0 0x00100000 0x0 0x1f4200>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x00ac0000 0x0 0x2000>; + ranges; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + status = "disabled"; + + uart7: serial@a88000 { + compatible = "qcom,geni-debug-uart"; + reg = <0x0 0x00a88000 0x0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; + pinctrl-names = "default"; + status = "disabled"; + }; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x0 0x01f40000 0x0 0x40000>; @@ -351,6 +403,32 @@ interrupt-controller; }; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm4450-tlmm"; + reg = <0x0 0x0f100000 0x0 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 137>; + wakeup-parent = <&pdc>; + + qup_uart7_rx: qup-uart7-rx-state { + pins = "gpio23"; + function = "qup1_se2_l2"; + drive-strength = <2>; + bias-disable; + }; + + qup_uart7_tx: qup-uart7-tx-state { + pins = "gpio22"; + function = "qup1_se2_l2"; + drive-strength = <2>; + bias-disable; + }; + }; + intc: interrupt-controller@17200000 { compatible = "arm,gic-v3"; reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ @@ -419,6 +497,35 @@ status = "disabled"; }; }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x17a00000 0x0 0x10000>, + <0x0 0x17a10000 0x0 0x10000>, + <0x0 0x17a20000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + label = "apps_rsc"; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 0>; + power-domains = <&CLUSTER_PD>; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm4450-rpmh-clk"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; + }; + }; timer { diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi index 839c60351240..160e098f1075 100644 --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi @@ -10,6 +10,8 @@ #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,rpm-icc.h> +#include <dt-bindings/interconnect/qcom,sm6115.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -264,6 +266,8 @@ scm: scm { compatible = "qcom,scm-sm6115", "qcom,scm"; #reset-cells = <1>; + interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; }; }; @@ -273,6 +277,25 @@ reg = <0 0x80000000 0 0>; }; + qup_opp_table: opp-table-qup { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; @@ -859,6 +882,43 @@ status = "disabled"; }; + system_noc: interconnect@1880000 { + compatible = "qcom,sm6115-snoc"; + reg = <0x0 0x01880000 0x0 0x5f080>; + clocks = <&gcc GCC_SYS_NOC_CPUSS_AHB_CLK>, + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&rpmcc RPM_SMD_IPA_CLK>; + clock-names = "cpu_axi", + "ufs_axi", + "usb_axi", + "ipa"; + #interconnect-cells = <2>; + + clk_virt: interconnect-clk { + compatible = "qcom,sm6115-clk-virt"; + #interconnect-cells = <2>; + }; + + mmrt_virt: interconnect-mmrt { + compatible = "qcom,sm6115-mmrt-virt"; + #interconnect-cells = <2>; + }; + + mmnrt_virt: interconnect-mmnrt { + compatible = "qcom,sm6115-mmnrt-virt"; + #interconnect-cells = <2>; + }; + }; + + config_noc: interconnect@1900000 { + compatible = "qcom,sm6115-cnoc"; + reg = <0x0 0x01900000 0x0 0x6200>; + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>; + clock-names = "usb_axi"; + #interconnect-cells = <2>; + }; + qfprom@1b40000 { compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; reg = <0x0 0x01b40000 0x0 0x7000>; @@ -883,6 +943,60 @@ clock-names = "core"; }; + pmu@1b8e300 { + compatible = "qcom,sm6115-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0x0 0x01b8e300 0x0 0x600>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + interconnects = <&bimc MASTER_AMPSS_M0 RPM_ACTIVE_TAG + &bimc SLAVE_EBI_CH0 RPM_ACTIVE_TAG>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <(200 * 4 * 1000)>; + }; + + opp-1 { + opp-peak-kBps = <(300 * 4 * 1000)>; + }; + + opp-2 { + opp-peak-kBps = <(451 * 4 * 1000)>; + }; + + opp-3 { + opp-peak-kBps = <(547 * 4 * 1000)>; + }; + + opp-4 { + opp-peak-kBps = <(681 * 4 * 1000)>; + }; + + opp-5 { + opp-peak-kBps = <(768 * 4 * 1000)>; + }; + + opp-6 { + opp-peak-kBps = <(1017 * 4 * 1000)>; + }; + + opp-7 { + opp-peak-kBps = <(1353 * 4 * 1000)>; + }; + + opp-8 { + opp-peak-kBps = <(1555 * 4 * 1000)>; + }; + + opp-9 { + opp-peak-kBps = <(1804 * 4 * 1000)>; + }; + }; + }; + spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x01c40000 0x0 0x1100>, @@ -912,6 +1026,12 @@ #thermal-sensor-cells = <1>; }; + bimc: interconnect@4480000 { + compatible = "qcom,sm6115-bimc"; + reg = <0x0 0x04480000 0x0 0x80000>; + #interconnect-cells = <2>; + }; + rpm_msg_ram: sram@45f0000 { compatible = "qcom,rpm-msg-ram"; reg = <0x0 0x045f0000 0x0 0x7000>; @@ -939,8 +1059,42 @@ <&gcc GCC_SDCC1_ICE_CORE_CLK>; clock-names = "iface", "core", "xo", "ice"; + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + interconnects = <&system_noc MASTER_SDCC_1 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_1 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + bus-width = <8>; status = "disabled"; + + sdhc1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <102400 65000>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_svs_plus>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <204800 200000>; + }; + }; }; sdhc_2: mmc@4784000 { @@ -961,6 +1115,12 @@ operating-points-v2 = <&sdhc2_opp_table>; iommus = <&apps_smmu 0x00a0 0x0>; resets = <&gcc GCC_SDCC2_BCR>; + interconnects = <&system_noc MASTER_SDCC_2 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_SDCC_2 RPM_ALWAYS_TAG>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; bus-width = <4>; qcom,dll-config = <0x0007642c>; @@ -973,11 +1133,15 @@ opp-100000000 { opp-hz = /bits/ 64 <100000000>; required-opps = <&rpmpd_opp_low_svs>; + opp-peak-kBps = <250000 133320>; + opp-avg-kBps = <261438 150000>; }; opp-202000000 { opp-hz = /bits/ 64 <202000000>; required-opps = <&rpmpd_opp_nom>; + opp-peak-kBps = <800000 300000>; + opp-avg-kBps = <261438 300000>; }; }; }; @@ -987,7 +1151,7 @@ reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <1>; #reset-cells = <1>; @@ -1028,24 +1192,17 @@ ufs_mem_phy: phy@4807000 { compatible = "qcom,sm6115-qmp-ufs-phy"; - reg = <0x0 0x04807000 0x0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0x0 0x04807000 0x0 0x1000>; clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; clock-names = "ref", "ref_aux"; resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@4807400 { - reg = <0x0 0x04807400 0x0 0x098>, - <0x0 0x04807600 0x0 0x130>, - <0x0 0x04807c00 0x0 0x16c>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; gpi_dma0: dma-controller@4a00000 { @@ -1091,6 +1248,15 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, <&gpi_dma0 1 0 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1107,6 +1273,15 @@ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, <&gpi_dma0 1 0 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1123,6 +1298,12 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, <&gpi_dma0 1 1 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1139,6 +1320,15 @@ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, <&gpi_dma0 1 1 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1155,6 +1345,15 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, <&gpi_dma0 1 2 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1171,6 +1370,15 @@ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, <&gpi_dma0 1 2 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1187,6 +1395,15 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, <&gpi_dma0 1 3 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1203,11 +1420,37 @@ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, <&gpi_dma0 1 3 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + uart3: serial@4a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts-extended = <&intc GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + power-domains = <&rpmpd SM6115_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a90000 0x0 0x4000>; @@ -1219,6 +1462,15 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, <&gpi_dma0 1 4 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1235,6 +1487,15 @@ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, <&gpi_dma0 1 4 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1246,6 +1507,12 @@ clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; status = "disabled"; }; @@ -1260,6 +1527,15 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, <&gpi_dma0 1 5 QCOM_GPI_I2C>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1276,6 +1552,15 @@ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, <&gpi_dma0 1 5 QCOM_GPI_SPI>; dma-names = "tx", "rx"; + interconnects = <&clk_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &clk_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>, + <&system_noc MASTER_QUP_0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1307,6 +1592,14 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; power-domains = <&gcc GCC_USB30_PRIM_GDSC>; + /* TODO: USB<->IPA path */ + interconnects = <&system_noc MASTER_USB3 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_USB3 RPM_ALWAYS_TAG>; + interconnect-names = "usb-ddr", + "apps-usb"; + qcom,select-utmi-as-pipe-clk; status = "disabled"; @@ -1478,6 +1771,13 @@ iommus = <&apps_smmu 0x420 0x2>, <&apps_smmu 0x421 0x0>; + interconnects = <&mmrt_virt MASTER_MDP_PORT0 RPM_ALWAYS_TAG + &bimc SLAVE_EBI_CH0 RPM_ALWAYS_TAG>, + <&bimc MASTER_AMPSS_M0 RPM_ALWAYS_TAG + &config_noc SLAVE_DISPLAY_CFG RPM_ALWAYS_TAG>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + #address-cells = <2>; #size-cells = <2>; ranges; @@ -2566,54 +2866,54 @@ compatible = "arm,armv7-timer-mem"; reg = <0x0 0x0f120000 0x0 0x1000>; #address-cells = <2>; - #size-cells = <2>; - ranges; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x0 0x20000000>; clock-frequency = <19200000>; frame@f121000 { - reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>; + reg = <0x0 0x0f121000 0x1000>, <0x0 0x0f122000 0x1000>; frame-number = <0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; frame@f123000 { - reg = <0x0 0x0f123000 0x0 0x1000>; + reg = <0x0 0x0f123000 0x1000>; frame-number = <1>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f124000 { - reg = <0x0 0x0f124000 0x0 0x1000>; + reg = <0x0 0x0f124000 0x1000>; frame-number = <2>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f125000 { - reg = <0x0 0x0f125000 0x0 0x1000>; + reg = <0x0 0x0f125000 0x1000>; frame-number = <3>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f126000 { - reg = <0x0 0x0f126000 0x0 0x1000>; + reg = <0x0 0x0f126000 0x1000>; frame-number = <4>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f127000 { - reg = <0x0 0x0f127000 0x0 0x1000>; + reg = <0x0 0x0f127000 0x1000>; frame-number = <5>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; frame@f128000 { - reg = <0x0 0x0f128000 0x0 0x1000>; + reg = <0x0 0x0f128000 0x1000>; frame-number = <6>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index eb07eca3a48d..1dd3a4056e26 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -1185,6 +1185,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <66666667>; + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + power-domains = <&gcc USB30_PRIM_GDSC>; qcom,select-utmi-as-pipe-clk; status = "disabled"; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 8fd6f4d03490..43cffe8e1247 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1142,7 +1142,7 @@ <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -1187,10 +1187,7 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm6350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; clock-names = "ref", "ref_aux"; @@ -1200,16 +1197,9 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; + #phy-cells = <0>; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x128>, - <0 0x01d87600 0 0x1fc>, - <0 0x01d87c00 0 0x1dc>, - <0 0x01d87800 0 0x128>, - <0 0x01d87a00 0 0x1fc>; - #phy-cells = <0>; - }; + status = "disabled"; }; ipa: ipa@1e40000 { @@ -2524,7 +2514,7 @@ compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts index b2f1bb1d58e9..cca2c2eb88ad 100644 --- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts +++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts @@ -80,6 +80,15 @@ }; }; + touch_avdd: touch-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "touch_avdd"; + gpio = <&tlmm 59 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_avdd_default>; + enable-active-high; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -136,9 +145,10 @@ interrupts = <22 0x2008>; vdd-supply = <&pm6125_l13>; + avdd-supply = <&touch_avdd>; pinctrl-names = "default"; - pinctrl-0 = <&ts_int_default &ts_avdd_default>; + pinctrl-0 = <&ts_int_default>; }; }; @@ -187,6 +197,11 @@ status = "okay"; }; +&remoteproc_mss { + firmware-name = "qcom/sm6375/Sony/murray/modem.mbn"; + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; @@ -238,8 +253,8 @@ }; pm6125_l7: l7 { - regulator-min-microvolt = <720000>; - regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; }; pm6125_l8: l8 { @@ -306,7 +321,7 @@ pm6125_l21: l21 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; + regulator-max-microvolt = <3312000>; }; pm6125_l22: l22 { @@ -317,7 +332,7 @@ pm6125_l23: l23 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3400000>; + regulator-max-microvolt = <3312000>; }; pm6125_l24: l24 { @@ -340,8 +355,8 @@ }; pmr735a_l2: l2 { - regulator-min-microvolt = <352000>; - regulator-max-microvolt = <796000>; + regulator-min-microvolt = <640000>; + regulator-max-microvolt = <640000>; }; pmr735a_l3: l3 { @@ -412,7 +427,7 @@ pins = "gpio59"; function = "gpio"; drive-strength = <8>; - output-high; + output-low; }; }; @@ -425,6 +440,18 @@ }; &usb_1_hsphy { + vdda-pll-supply = <&pm6125_l7>; + vdda18-supply = <&pm6125_l10>; + vdda33-supply = <&pmr735a_l7>; + status = "okay"; +}; + +&wifi { + vdd-0.8-cx-mx-supply = <&pmr735a_l2>; + vdd-1.8-xo-supply = <&pm6125_l16>; + vdd-1.3-rfa-supply = <&pm6125_l2>; + vdd-3.3-ch0-supply = <&pm6125_l23>; + vdd-3.3-ch1-supply = <&pm6125_l21>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index e7ff55443da7..7ac8bf26dda3 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -311,6 +311,25 @@ }; }; + mpm: interrupt-controller { + compatible = "qcom,mpm"; + qcom,rpm-msg-ram = <&apss_mpm>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_SMP2P>; + interrupt-controller; + #interrupt-cells = <2>; + #power-domain-cells = <0>; + interrupt-parent = <&intc>; + qcom,mpm-pin-count = <96>; + qcom,mpm-pin-map = <5 296>, /* Soundwire wake_irq */ + <12 422>, /* DWC3 ss_phy_irq */ + <86 183>, /* MPM wake, SPMI */ + <89 314>, /* TSENS0 0C */ + <90 315>, /* TSENS1 0C */ + <93 164>, /* DWC3 dm_hs_phy_irq */ + <94 165>; /* DWC3 dp_hs_phy_irq */ + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -486,6 +505,7 @@ CLUSTER_PD: power-domain-cpu-cluster0 { #power-domain-cells = <0>; + power-domains = <&mpm>; domain-idle-states = <&CLUSTER_SLEEP_0>; }; }; @@ -808,7 +828,7 @@ reg = <0 0x00500000 0 0x800000>; interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; gpio-ranges = <&tlmm 0 0 157>; - /* TODO: Hook up MPM as wakeup-parent when it's there */ + wakeup-parent = <&mpm>; interrupt-controller; gpio-controller; #interrupt-cells = <2>; @@ -896,6 +916,36 @@ drive-strength = <6>; bias-disable; }; + + qup_uart1_default: qup-uart1-default-state { + cts-pins { + pins = "gpio61"; + function = "qup01"; + drive-strength = <2>; + bias-pull-down; + }; + + rts-pins { + pins = "gpio62"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + tx-pins { + pins = "gpio63"; + function = "qup01"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio64"; + function = "qup01"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; gcc: clock-controller@1400000 { @@ -930,7 +980,7 @@ <0 0x01c0a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&mpm 86 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -962,8 +1012,15 @@ }; rpm_msg_ram: sram@45f0000 { - compatible = "qcom,rpm-msg-ram"; + compatible = "qcom,rpm-msg-ram", "mmio-sram"; reg = <0 0x045f0000 0 0x7000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x045f0000 0x7000>; + + apss_mpm: sram@1b8 { + reg = <0x1b8 0x48>; + }; }; sram@4690000 { @@ -1111,6 +1168,19 @@ status = "disabled"; }; + uart1: serial@4a84000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a84000 0x0 0x4000>; + interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + power-domains = <&rpmpd SM6375_VDDCX>; + operating-points-v2 = <&qup_opp_table>; + pinctrl-0 = <&qup_uart1_default>; + pinctrl-names = "default"; + status = "disabled"; + }; + i2c2: i2c@4a88000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a88000 0x0 0x4000>; @@ -1360,10 +1430,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <133333333>; - interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 12 IRQ_TYPE_LEVEL_HIGH>, + <&mpm 93 IRQ_TYPE_EDGE_BOTH>, + <&mpm 94 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts index bb161b536da4..de670b407ef1 100644 --- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts @@ -7,6 +7,7 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/usb/pd.h> #include "sm8150.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -54,6 +55,17 @@ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; }; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; }; &apps_rsc { @@ -127,8 +139,6 @@ vdda_sp_sensor: vdda_ufs_2ln_core_1: vdda_ufs_2ln_core_2: - vdda_usb_ss_dp_core_1: - vdda_usb_ss_dp_core_2: vdda_qlink_lv: vdda_qlink_lv_ck: vreg_l5a_0p875: ldo5 { @@ -210,6 +220,12 @@ regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; + + vreg_l18a_0p8: ldo18 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; }; regulators-1 { @@ -359,15 +375,210 @@ status = "okay"; }; +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + &gpu { - /* - * NOTE: "amd,imageon" makes Adreno start in headless mode, remove it - * after display support is added on this board. - */ - compatible = "qcom,adreno-640.1", "qcom,adreno", "amd,imageon"; status = "okay"; }; +&i2c4 { + clock-frequency = <100000>; + + status = "okay"; + + typec-mux@42 { + compatible = "fcs,fsa4480"; + reg = <0x42>; + + interrupts-extended = <&tlmm 152 IRQ_TYPE_LEVEL_LOW>; + + vcc-supply = <&vreg_bob>; + mode-switch; + orientation-switch; + + port { + fsa4480_sbu_mux: endpoint { + remote-endpoint = <&pm8150b_typec_sbu_out>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 9 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>; + + vdd-supply = <&vreg_s4a_1p8>; + vcc-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_a: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_b: endpoint { + remote-endpoint = <&mdss_dsi1_out>; + }; + }; + + port@2 { + reg = <2>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dp { + status = "okay"; +}; + +&mdss_dp_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + +&mdss_dsi0 { + status = "okay"; + vdda-supply = <&vreg_l3c_1p2>; + + qcom,dual-dsi-mode; + qcom,master-dsi; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l5a_0p875>; +}; + +&mdss_dsi1 { + vdda-supply = <&vreg_l3c_1p2>; + + qcom,dual-dsi-mode; + + /* DSI1 is slave, so use DSI0 clocks */ + assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>; + + status = "okay"; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_b>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&mdss_dsi1_phy { + vdds-supply = <&vreg_l5a_0p875>; + status = "okay"; +}; + +&pm8150b_vbus { + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + status = "okay"; +}; + +&pm8150b_typec { + status = "okay"; + + vdd-pdphy-supply = <&vreg_l2a_3p1>; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | + PDO_FIXED_DATA_SWAP)>; + + altmodes { + displayport { + svid = /bits/ 16 <0xff01>; + vdo = <0x00001c46>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + pm8150b_typec_mux_in: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pm8150b_typec_sbu_out: endpoint { + remote-endpoint = <&fsa4480_sbu_mux>; + }; + }; + }; + }; +}; + &pon_pwrkey { status = "okay"; }; @@ -378,6 +589,10 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&qupv3_id_0 { + status = "okay"; +}; + &qupv3_id_1 { status = "okay"; }; @@ -402,6 +617,13 @@ &tlmm { gpio-reserved-ranges = <0 4>, <126 4>; + + lt9611_irq_pin: lt9611-irq-state { + pins = "gpio9"; + function = "gpio"; + bias-disable; + }; + }; &uart2 { @@ -445,13 +667,26 @@ &usb_1_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l3c_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; + vdda-pll-supply = <&vreg_l18a_0p8>; + orientation-switch; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss_dp_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pm8150b_typec_mux_in>; +}; + +&usb_1_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; }; &usb_2_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l3c_1p2>; - vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; + vdda-pll-supply = <&vreg_l5a_0p875>; }; &usb_1 { @@ -463,7 +698,16 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pm8150b_role_switch_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&usb_1_qmpphy_usb_ss_in>; }; &usb_2_dwc3 { diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 97623af13464..761a6757dc26 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -1824,7 +1824,7 @@ <0x0 0x010ad000 0x0 0x3000>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8150"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1878,7 +1878,7 @@ phys = <&pcie0_phy>; phy-names = "pciephy"; - perst-gpio = <&tlmm 35 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>; enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -1915,7 +1915,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8150"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -1972,7 +1972,7 @@ phys = <&pcie1_phy>; phy-names = "pciephy"; - perst-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; @@ -2016,7 +2016,7 @@ <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2061,10 +2061,8 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8150-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, @@ -2074,16 +2072,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -2957,11 +2949,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@1 { - reg = <1>; + port { replicator1_in: endpoint { remote-endpoint = <&replicator_out1>; }; @@ -3447,37 +3436,56 @@ #phy-cells = <1>; status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_1_qmpphy_dp_in: endpoint { + }; + }; + }; }; usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8150-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_CLK>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x200>, - <0 0x088eb400 0 0x200>, - <0 0x088eb800 0 0x800>, - <0 0x088eb600 0 0x200>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; sdhc_2: mmc@8804000 { @@ -3565,10 +3573,10 @@ <&gcc GCC_USB30_PRIM_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 8 IRQ_TYPE_EDGE_BOTH>, + <&pdc 9 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -3589,6 +3597,25 @@ snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>; phy-names = "usb2-phy", "usb3-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; }; }; @@ -3618,10 +3645,10 @@ <&gcc GCC_USB30_SEC_MASTER_CLK>; assigned-clock-rates = <19200000>, <200000000>; - interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 7 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 10 IRQ_TYPE_EDGE_BOTH>, + <&pdc 11 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", "dp_hs_phy_irq"; @@ -3640,7 +3667,7 @@ iommus = <&apps_smmu 0x160 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -3719,6 +3746,13 @@ remote-endpoint = <&mdss_dsi1_in>; }; }; + + port@2 { + reg = <2>; + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp_in>; + }; + }; }; mdp_opp_table: opp-table { @@ -3746,6 +3780,86 @@ }; }; + mdss_dp: displayport-controller@ae90000 { + compatible = "qcom,sm8150-dp", "qcom,sm8350-dp"; + reg = <0 0xae90000 0 0x200>, + <0 0xae90200 0 0x200>, + <0 0xae90400 0 0x600>, + <0 0x0ae90a00 0 0x600>, + <0 0x0ae91000 0 0x600>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>; + assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd SM8250_MMCX>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dp_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { + }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + mdss_dsi0: dsi@ae94000 { compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl"; reg = <0 0x0ae94000 0 0x400>; @@ -3932,6 +4046,7 @@ "dp_phy_pll_link_clk", "dp_phy_pll_vco_div_clk"; power-domains = <&rpmhpd SM8150_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; @@ -4170,7 +4285,7 @@ compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi index 85e5cf3dc91e..946365f15a59 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/arm/qcom,ids.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/usb/pd.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" @@ -23,7 +24,7 @@ /delete-node/ &xbl_aop_mem; / { - classis-type = "tablet"; + chassis-type = "tablet"; /* required for bootloader to select correct board */ qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */ @@ -114,7 +115,7 @@ }; reserved-memory { - xbl_aop_mem: xbl-aop@80700000 { + xbl_aop_mem: xbl-aop@80600000 { reg = <0x0 0x80600000 0x0 0x260000>; no-map; }; @@ -627,6 +628,41 @@ }; }; +&pm8150b_typec { + vdd-pdphy-supply = <&vreg_l2a_3p1>; + status = "okay"; + + connector { + compatible = "usb-c-connector"; + + power-role = "source"; + data-role = "dual"; + self-powered; + + source-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_USB_COMM | + PDO_FIXED_DATA_SWAP)>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pm8150b_role_switch_in: endpoint { + remote-endpoint = <&usb_1_role_switch_out>; + }; + }; + }; + }; +}; + +&pm8150b_vbus { + status = "okay"; +}; + &pon_pwrkey { status = "okay"; }; @@ -664,11 +700,12 @@ }; &usb_1_dwc3 { - dr_mode = "peripheral"; + dr_mode = "otg"; maximum-speed = "high-speed"; /* Remove USB3 phy */ phys = <&usb_1_hsphy>; phy-names = "usb2-phy"; + usb-role-switch; }; &usb_1_hsphy { @@ -678,6 +715,10 @@ status = "okay"; }; +&usb_1_role_switch_out { + remote-endpoint = <&pm8150b_role_switch_in>; +}; + &ufs_mem_hc { vcc-supply = <&vreg_l17a_3p0>; vcc-max-microamp = <800000>; diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts new file mode 100644 index 000000000000..86e1f7fd1c20 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +/* + * Copyright (c) 2023 Luka Panio <lukapanio@gmail.com> + */ + +/dts-v1/; + +#include <dt-bindings/arm/qcom,ids.h> +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" + +/* + * Delete following upstream (sm8250.dtsi) reserved + * memory mappings which are different on this device. + */ +/delete-node/ &adsp_mem; +/delete-node/ &cdsp_secure_heap; +/delete-node/ &slpi_mem; +/delete-node/ &spss_mem; +/delete-node/ &xbl_aop_mem; + +/ { + + model = "Xiaomi Pad 6"; + compatible = "xiaomi,pipa", "qcom,sm8250"; + + chassis-type = "tablet"; + + /* required for bootloader to select correct board */ + qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */ + qcom,board-id = <0x34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@9c000000 { + compatible = "simple-framebuffer"; + reg = <0x0 0x9c000000 0x0 0x2300000>; + width = <1800>; + height = <2880>; + stride = <(1800 * 4)>; + format = "a8r8g8b8"; + }; + }; + + battery_l: battery-l { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16700000>; + charge-full-design-microamp-hours = <4420000>; + }; + + battery_r: battery-r { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3870000>; + energy-full-design-microwatt-hours = <16700000>; + charge-full-design-microamp-hours = <4420000>; + }; + + bl_vddpos_5p5: bl-vddpos-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddpos_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + bl_vddneg_5p5: bl-vddneg-regulator { + compatible = "regulator-fixed"; + regulator-name = "bl_vddneg_5p5"; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + regulator-enable-ramp-delay = <233>; + gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&vol_up_n>; + pinctrl-names = "default"; + + key-vol-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ + vreg_s6c_0p88: smpc6-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_s6c_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-always-on; + vin-supply = <&vph_pwr>; + }; + + reserved-memory { + xbl_aop_mem: xbl-aop@80700000 { + reg = <0x0 0x80600000 0x0 0x260000>; + no-map; + }; + + slpi_mem: slpi@88c00000 { + reg = <0x0 0x88c00000 0x0 0x2f00000>; + no-map; + }; + + adsp_mem: adsp@8bb00000 { + reg = <0x0 0x8bb00000 0x0 0x2500000>; + no-map; + }; + + spss_mem: spss@8e000000 { + reg = <0x0 0x8e000000 0x0 0x100000>; + no-map; + }; + + cdsp_secure_heap: cdsp-secure-heap@8e100000 { + reg = <0x0 0x8e100000 0x0 0x4600000>; + no-map; + }; + + cont_splash_mem: cont-splash@9c000000 { + reg = <0x0 0x9c000000 0x0 0x2300000>; + no-map; + }; + + ramoops@b0000000 { + compatible = "ramoops"; + reg = <0x0 0xb0000000 0x0 0x400000>; + record-size = <0x1000>; + console-size = <0x200000>; + ecc-size = <16>; + no-map; + }; + }; +}; + +&adsp { + firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn"; + status = "okay"; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>; + vdd-l6-l9-supply = <&vreg_s8c_1p35>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + /* (S1+S2+S3) - cx.lvl (ARC) */ + + vreg_s4a_1p8: smps4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5a_1p9: smps5 { + regulator-name = "vreg_s5a_1p9"; + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6a_0p95: smps6 { + regulator-name = "vreg_s6a_0p95"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2a_3p1: ldo2 { + regulator-name = "vreg_l2a_3p1"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3a_0p9: ldo3 { + regulator-name = "vreg_l3a_0p9"; + regulator-min-microvolt = <928000>; + regulator-max-microvolt = <932000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L4 - lmx.lvl (ARC) */ + + vreg_l5a_0p88: ldo5 { + regulator-name = "vreg_l5a_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6a_1p2: ldo6 { + regulator-name = "vreg_l6a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + /* L7 is unused. */ + + vreg_l9a_1p2: ldo9 { + regulator-name = "vreg_l9a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L10 is unused, L11 - lcx.lvl (ARC) */ + + vreg_l12a_1p8: ldo12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L13 is unused. */ + + vreg_l14a_1p88: ldo14 { + regulator-name = "vreg_l14a_1p88"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L15 & L16 are unused. */ + + vreg_l17a_3p0: ldo17 { + regulator-name = "vreg_l17a_3p0"; + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l18a_0p9: ldo18 { + regulator-name = "vreg_l18a_0p9"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-l1-l8-supply = <&vreg_s4a_1p8>; + vdd-l2-l3-supply = <&vreg_s8c_1p35>; + vdd-l4-l5-l6-supply = <&vreg_bob>; + vdd-l7-l11-supply = <&vreg_bob>; + vdd-l9-l10-supply = <&vreg_bob>; + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3350000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + }; + + /* + * S1-S6 are ARCs: + * (S1+S2) - gfx.lvl, + * S3 - mx.lvl, + * (S4+S5) - mmcx.lvl, + * S6 - ebi.lvl + */ + + vreg_s7c_0p35: smps7 { + regulator-name = "vreg_s7c_0p35"; + regulator-min-microvolt = <348000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s8c_1p35: smps8 { + regulator-name = "vreg_s8c_1p35"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-name = "vreg_l1c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L2-4 are unused. */ + + vreg_l5c_1p8: ldo5 { + regulator-name = "vreg_l5c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-name = "vreg_l6c_2p9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c_2p85: ldo7 { + regulator-name = "vreg_l7c_2p85"; + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-name = "vreg_l8c_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-name = "vreg_l9c_2p9"; + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-name = "vreg_l10c_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p0: ldo11 { + regulator-name = "vreg_l11c_3p0"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8009-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vreg_bob>; + vdd-l2-supply = <&vreg_s8c_1p35>; + vdd-l5-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_s4a_1p8>; + + vreg_s1f_1p2: smps1 { + regulator-name = "vreg_s1f_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2f_0p5: smps2 { + regulator-name = "vreg_s2f_0p5"; + regulator-min-microvolt = <512000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L1 is unused. */ + + vreg_l2f_1p3: ldo2 { + regulator-name = "vreg_l2f_1p3"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* L3 & L4 are unused. */ + + vreg_l5f_2p8: ldo5 { + regulator-name = "vreg_l5f_2p85"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6f_2p8: ldo6 { + regulator-name = "vreg_l6f_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7f_1p8: ldo7 { + regulator-name = "vreg_l7f_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&cdsp { + firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn"; + status = "okay"; +}; + +&gmu { + status = "okay"; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&gpi_dma2 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn"; + }; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_r>; + }; +}; + +&i2c11 { + clock-frequency = <400000>; + status = "okay"; + + backlight: backlight@11 { + compatible = "kinetic,ktz8866"; + reg = <0x11>; + vddpos-supply = <&bl_vddpos_5p5>; + vddneg-supply = <&bl_vddneg_5p5>; + enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>; + current-num-sinks = <5>; + kinetic,current-ramp-delay-ms = <128>; + kinetic,led-enable-ramp-delay-ms = <1>; + kinetic,enable-lcd-bias; + }; +}; + +&i2c13 { + clock-frequency = <400000>; + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq27z561"; + reg = <0x55>; + monitored-battery = <&battery_l>; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = "normal"; + power-source = <1>; + input-enable; + bias-pull-up; + }; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&slpi { + firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l5a_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l2a_3p1>; + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l9a_1p2>; + vdda-pll-supply = <&vreg_l18a_0p9>; +}; + +&ufs_mem_hc { + vcc-supply = <&vreg_l17a_3p0>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6a_1p2>; + vccq-max-microamp = <800000>; + vccq2-supply = <&vreg_s4a_1p8>; + vccq2-max-microamp = <800000>; + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5a_0p88>; + vdda-pll-supply = <&vreg_l9a_1p2>; + status = "okay"; +}; + +&venus { + firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index be970472f6c4..760501c1301a 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -671,6 +671,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8250", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; #reset-cells = <1>; }; }; @@ -2123,7 +2124,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -2227,7 +2228,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2328,7 +2329,7 @@ status = "disabled"; }; - pcie2: pci@1c10000 { + pcie2: pcie@1c10000 { compatible = "qcom,pcie-sm8250"; reg = <0 0x01c10000 0 0x3000>, <0 0x64000000 0 0xf1d>, @@ -2434,7 +2435,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2463,29 +2464,48 @@ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; - freq-table-hz = - <37500000 300000000>, - <0 0>, - <0 0>, - <37500000 300000000>, - <0 0>, - <0 0>, - <0 0>, - <0 0>; + + operating-points-v2 = <&ufs_opp_table>; interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI_CH0 0>, <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_UFS_MEM_CFG 0>; interconnect-names = "ufs-ddr", "cpu-ufs"; status = "disabled"; + + ufs_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-37500000 { + opp-hz = /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <37500000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <300000000>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>, + /bits/ 64 <0>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8250-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, @@ -2493,16 +2513,10 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -2543,6 +2557,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8250-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + wsamacro: codec@3240000 { compatible = "qcom,sm8250-lpass-wsa-macro"; reg = <0 0x03240000 0 0x1000>; @@ -2565,7 +2584,7 @@ status = "disabled"; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { reg = <0 0x03250000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; @@ -2631,7 +2650,7 @@ #sound-dai-cells = <1>; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { reg = <0 0x03210000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; status = "disabled"; @@ -2678,7 +2697,7 @@ }; /* tx macro */ - swr2: soundwire-controller@3230000 { + swr2: soundwire@3230000 { reg = <0 0x03230000 0 0x2000>; compatible = "qcom,soundwire-v1.5.1"; interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; @@ -3095,11 +3114,8 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { tpda_out_funnel_qatb: endpoint { remote-endpoint = <&funnel_qatb_in_tpda>; }; @@ -3142,11 +3158,7 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_qatb_in_tpda: endpoint { remote-endpoint = <&tpda_out_funnel_qatb>; }; @@ -3355,11 +3367,8 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + port { etf_in_funnel_swao_out: endpoint { remote-endpoint = <&funnel_swao_out_etf>; }; @@ -3443,8 +3452,6 @@ clock-names = "apb_pclk"; out-ports { - #address-cells = <1>; - #size-cells = <0>; port { tpdm_mm_out_tpda9: endpoint { remote-endpoint = <&tpda_9_in_tpdm_mm>; @@ -3710,11 +3717,7 @@ }; in-ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + port { funnel_apss_merg_in_funnel_apss: endpoint { remote-endpoint = <&funnel_apss_out_funnel_apss_merg>; }; @@ -3889,32 +3892,26 @@ usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8250-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; - status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x088eb000 0 0x1000>; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; - usb_2_ssphy: phy@88eb200 { - reg = <0 0x088eb200 0 0x200>, - <0 0x088eb400 0 0x200>, - <0 0x088eb800 0 0x800>; - #clock-cells = <0>; - #phy-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + status = "disabled"; }; sdhc_2: mmc@8804000 { @@ -4141,6 +4138,7 @@ "dp_hs_phy_irq"; power-domains = <&gcc USB30_PRIM_GDSC>; + wakeup-source; resets = <&gcc GCC_USB30_PRIM_BCR>; @@ -4209,6 +4207,7 @@ "dp_hs_phy_irq"; power-domains = <&gcc USB30_SEC_GDSC>; + wakeup-source; resets = <&gcc GCC_USB30_SEC_BCR>; @@ -4223,7 +4222,7 @@ iommus = <&apps_smmu 0x20 0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -6018,7 +6017,7 @@ compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>; }; timer@17c20000 { diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index b46236235b7f..e78c83a897c2 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -289,6 +289,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8350", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x13000>; #reset-cells = <1>; }; }; @@ -677,9 +678,9 @@ <0>, <0>, <0>, - <&ufs_mem_phy_lanes 0>, - <&ufs_mem_phy_lanes 1>, - <&ufs_mem_phy_lanes 2>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>, <0>; }; @@ -919,9 +920,9 @@ }; }; - gpi_dma0: dma-controller@9800000 { + gpi_dma0: dma-controller@900000 { compatible = "qcom,sm8350-gpi-dma", "qcom,sm6350-gpi-dma"; - reg = <0 0x09800000 0 0x60000>; + reg = <0 0x00900000 0 0x60000>; interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, @@ -1498,7 +1499,7 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8350"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1591,7 +1592,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8350"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -1679,7 +1680,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -1723,10 +1724,8 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8350-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&rpmhcc RPMH_CXO_CLK>, @@ -1734,17 +1733,11 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; cryptobam: dma-controller@1dc4000 { @@ -1818,6 +1811,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sm8350-tcsr", "syscon"; + reg = <0x0 0x1fc0000 0x0 0x30000>; + }; + lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8350-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0 0x20000>, @@ -2021,7 +2019,7 @@ compatible = "qcom,sm8350-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; - interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2063,7 +2061,7 @@ compatible = "qcom,sm8350-slpi-pas"; reg = <0 0x05c00000 0 0x4000>; - interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 9 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, @@ -2238,34 +2236,27 @@ }; }; - usb_2_qmpphy: phy-wrapper@88eb000 { + usb_2_qmpphy: phy@88eb000 { compatible = "qcom,sm8350-qmp-usb3-uni-phy"; - reg = <0 0x088eb000 0 0x200>; + reg = <0 0x088eb000 0 0x2000>; status = "disabled"; - #address-cells = <2>; - #size-cells = <2>; - ranges; clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>, - <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_USB3_SEC_CLKREF_EN>, - <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>; - clock-names = "aux", "ref_clk_src", "ref", "com_aux"; - - resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>, - <&gcc GCC_USB3_PHY_SEC_BCR>; - reset-names = "phy", "common"; + <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "pipe"; + clock-output-names = "usb3_uni_phy_pipe_clk_src"; + #clock-cells = <0>; + #phy-cells = <0>; - usb_2_ssphy: phy@88ebe00 { - reg = <0 0x088ebe00 0 0x200>, - <0 0x088ec000 0 0x200>, - <0 0x088eb200 0 0x1100>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_uni_phy_pipe_clk_src"; - }; + resets = <&gcc GCC_USB3_PHY_SEC_BCR>, + <&gcc GCC_USB3PHY_PHY_SEC_BCR>; + reset-names = "phy", + "phy_phy"; }; dc_noc: interconnect@90c0000 { @@ -2418,7 +2409,7 @@ iommus = <&apps_smmu 0x20 0x0>; snps,dis_u2_susphy_quirk; snps,dis_enblslpm_quirk; - phys = <&usb_2_hsphy>, <&usb_2_ssphy>; + phys = <&usb_2_hsphy>, <&usb_2_qmpphy>; phy-names = "usb2-phy", "usb3-phy"; }; }; @@ -2453,35 +2444,6 @@ #size-cells = <2>; ranges; - dpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - /* TODO: opp-200000000 should work with - * &rpmhpd_opp_low_svs, but one some of - * sm8350_hdk boards reboot using this - * opp. - */ - opp-200000000 { - opp-hz = /bits/ 64 <200000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-300000000 { - opp-hz = /bits/ 64 <300000000>; - required-opps = <&rpmhpd_opp_svs>; - }; - - opp-345000000 { - opp-hz = /bits/ 64 <345000000>; - required-opps = <&rpmhpd_opp_svs_l1>; - }; - - opp-460000000 { - opp-hz = /bits/ 64 <460000000>; - required-opps = <&rpmhpd_opp_nom>; - }; - }; - mdss_mdp: display-controller@ae01000 { compatible = "qcom,sm8350-dpu"; reg = <0 0x0ae01000 0 0x8f000>, @@ -2510,6 +2472,35 @@ interrupt-parent = <&mdss>; interrupts = <0>; + dpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + /* TODO: opp-200000000 should work with + * &rpmhpd_opp_low_svs, but one some of + * sm8350_hdk boards reboot using this + * opp. + */ + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + ports { #address-cells = <1>; #size-cells = <0>; @@ -3207,7 +3198,7 @@ compatible = "qcom,sm8350-adsp-pas"; reg = <0 0x17300000 0 0x100>; - interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, @@ -3512,7 +3503,7 @@ compatible = "qcom,sm8350-cdsp-pas"; reg = <0 0x98900000 0 0x1400000>; - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 20153d08edde..a20d5d76af35 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -580,6 +580,14 @@ status = "okay"; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8450/a730_zap.mbn"; + }; +}; + &i2c9 { clock-frequency = <400000>; status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 1783fa78bdbc..01e4dfc4babd 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,sm8450-camcc.h> #include <dt-bindings/clock/qcom,sm8450-dispcc.h> +#include <dt-bindings/clock/qcom,sm8450-gpucc.h> #include <dt-bindings/clock/qcom,sm8450-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> @@ -18,6 +19,7 @@ #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/interconnect/qcom,icc.h> #include <dt-bindings/interconnect/qcom,sm8450.h> +#include <dt-bindings/reset/qcom,sm8450-gpucc.h> #include <dt-bindings/soc/qcom,gpr.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> @@ -754,9 +756,9 @@ <&pcie0_phy>, <&pcie1_phy>, <0>, - <&ufs_mem_phy_lanes 0>, - <&ufs_mem_phy_lanes 1>, - <&ufs_mem_phy_lanes 2>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; clock-names = "bi_tcxo", "sleep_clk", @@ -1739,7 +1741,12 @@ }; }; - pcie0: pci@1c00000 { + rng: rng@10c3000 { + compatible = "qcom,sm8450-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pcie@1c00000 { compatible = "qcom,pcie-sm8450-pcie0"; reg = <0 0x01c00000 0 0x3000>, <0 0x60000000 0 0xf1d>, @@ -1848,7 +1855,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { compatible = "qcom,pcie-sm8450-pcie1"; reg = <0 0x01c08000 0 0x3000>, <0 0x40000000 0 0xf1d>, @@ -2014,6 +2021,206 @@ reg = <0x0 0x1fc0000 0x0 0x30000>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-730.1", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x400>, + <&adreno_smmu 1 0x400>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_micro_code_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-818000000 { + opp-hz = /bits/ 64 <818000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-791000000 { + opp-hz = /bits/ 64 <791000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-734000000 { + opp-hz = /bits/ 64 <734000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-640000000 { + opp-hz = /bits/ 64 <640000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-599000000 { + opp-hz = /bits/ 64 <599000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-545000000 { + opp-hz = /bits/ 64 <545000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-492000000 { + opp-hz = /bits/ 64 <492000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-421000000 { + opp-hz = /bits/ 64 <421000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-317000000 { + opp-hz = /bits/ 64 <317000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-285000000 { + opp-hz = /bits/ 64 <285000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-730.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b290000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8450-gpucc"; + reg = <0x0 0x03d90000 0x0 0xa000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8450-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 700 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "gmu", + "hub", + "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CX_GDSC>; + dma-coherent; + }; + usb_1_hsphy: phy@88e3000 { compatible = "qcom,sm8450-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; @@ -2149,18 +2356,13 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; #clock-cells = <0>; clock-output-names = "wsa2-mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa2_swr_active>; #sound-dai-cells = <1>; }; - swr4: soundwire-controller@31f0000 { + swr4: soundwire@31f0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x031f0000 0 0x2000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -2168,6 +2370,9 @@ clock-names = "iface"; label = "WSA2"; + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2197,18 +2402,12 @@ <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&rx_swr_active>; #sound-dai-cells = <1>; }; - swr1: soundwire-controller@3210000 { + swr1: soundwire@3210000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03210000 0 0x2000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2218,6 +2417,9 @@ qcom,din-ports = <0>; qcom,dout-ports = <5>; + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1f 0x1f 0x07 0x00>; qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00>; qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00>; @@ -2243,14 +2445,9 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&tx_swr_active>; #sound-dai-cells = <1>; }; @@ -2264,18 +2461,12 @@ <&vamacro>; clock-names = "mclk", "npl", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, - <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>, <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa_swr_active>; #sound-dai-cells = <1>; }; - swr0: soundwire-controller@3250000 { + swr0: soundwire@3250000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x03250000 0 0x2000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2283,6 +2474,9 @@ clock-names = "iface"; label = "WSA"; + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <2>; qcom,dout-ports = <6>; @@ -2302,17 +2496,20 @@ status = "disabled"; }; - swr2: soundwire-controller@33b0000 { + swr2: soundwire@33b0000 { compatible = "qcom,soundwire-v1.7.0"; reg = <0 0x033b0000 0 0x2000>; interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; - clocks = <&vamacro>; + clocks = <&txmacro>; clock-names = "iface"; label = "TX"; + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <0>; qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; @@ -2339,8 +2536,6 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&q6prmcc LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "mclk", "macro", "dcodec", "npl"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; #clock-cells = <0>; clock-output-names = "fsgen"; @@ -4122,7 +4317,7 @@ "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -4171,10 +4366,8 @@ ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8450-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c4>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux", "qref"; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, @@ -4182,17 +4375,11 @@ resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x188>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x188>, - <0 0x01d87a00 0 0x200>; - #clock-cells = <1>; - #phy-cells = <0>; - }; + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; }; ice: crypto@1d88000 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index 9a70875028b7..c1135ad5fa69 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -10,6 +10,7 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" @@ -510,6 +511,134 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p8>; + vdd-l6-supply = <&vreg_s6g_1p8>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s4g_1p3>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; }; &i2c_master_hub_0 { diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts index eef811def39b..d401d63e5c4d 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts @@ -11,6 +11,7 @@ #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" +#define PMK8550VE_SID 5 #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" @@ -527,6 +528,126 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_s6g_1p86>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p056: ldo1 { + regulator-name = "vreg_l1m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_1p8: ldo6 { + regulator-name = "vreg_l6m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p9: ldo7 { + regulator-name = "vreg_l7m_2p9"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s4g_1p25>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6g_1p86>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p1: ldo2 { + regulator-name = "vreg_l2n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_2p8: ldo3 { + regulator-name = "vreg_l3n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_2p8: ldo4 { + regulator-name = "vreg_l4n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_1p8: ldo5 { + regulator-name = "vreg_l5n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_3p3: ldo6 { + regulator-name = "vreg_l6n_3p3"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_2p96: ldo7 { + regulator-name = "vreg_l7n_2p96"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &i2c_master_hub_0 { @@ -585,6 +706,13 @@ }; }; +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8550/ipa_fws.mbn"; + status = "okay"; +}; + &gcc { clocks = <&bi_tcxo_div2>, <&sleep_clk>, <&pcie0_phy>, @@ -596,6 +724,14 @@ <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; }; +&gpu { + status = "okay"; + + zap-shader { + firmware-name = "qcom/sm8550/a740_zap.mbn"; + }; +}; + &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio17"; diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 7b9ddde0b2c9..ee1ba5a8c8fc 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -285,9 +285,9 @@ compatible = "arm,idle-state"; idle-state-name = "silver-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; - entry-latency-us = <800>; + entry-latency-us = <550>; exit-latency-us = <750>; - min-residency-us = <4090>; + min-residency-us = <6700>; local-timer-stop; }; @@ -296,8 +296,18 @@ idle-state-name = "gold-rail-power-collapse"; arm,psci-suspend-param = <0x40000004>; entry-latency-us = <600>; - exit-latency-us = <1550>; - min-residency-us = <4791>; + exit-latency-us = <1300>; + min-residency-us = <8136>; + local-timer-stop; + }; + + PRIME_CPU_SLEEP_0: cpu-sleep-2-0 { + compatible = "arm,idle-state"; + idle-state-name = "goldplus-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <500>; + exit-latency-us = <1350>; + min-residency-us = <7480>; local-timer-stop; }; }; @@ -306,17 +316,17 @@ CLUSTER_SLEEP_0: cluster-sleep-0 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x41000044>; - entry-latency-us = <1050>; - exit-latency-us = <2500>; - min-residency-us = <5309>; + entry-latency-us = <750>; + exit-latency-us = <2350>; + min-residency-us = <9144>; }; CLUSTER_SLEEP_1: cluster-sleep-1 { compatible = "domain-idle-state"; arm,psci-suspend-param = <0x4100c344>; - entry-latency-us = <2700>; - exit-latency-us = <3500>; - min-residency-us = <13959>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; }; }; }; @@ -324,6 +334,7 @@ firmware { scm: scm { compatible = "qcom,scm-sm8550", "qcom,scm"; + qcom,dload-mode = <&tcsr 0x19000>; interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>; }; }; @@ -400,7 +411,7 @@ CPU_PD7: power-domain-cpu7 { #power-domain-cells = <0>; power-domains = <&CLUSTER_PD>; - domain-idle-states = <&BIG_CPU_SLEEP_0>; + domain-idle-states = <&PRIME_CPU_SLEEP_0>; }; CLUSTER_PD: power-domain-cluster { @@ -1677,7 +1688,12 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - pcie0: pci@1c00000 { + rng: rng@10c3000 { + compatible = "qcom,sm8550-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pcie@1c00000 { device_type = "pci"; compatible = "qcom,pcie-sm8550"; reg = <0 0x01c00000 0 0x3000>, @@ -1768,7 +1784,7 @@ status = "disabled"; }; - pcie1: pci@1c08000 { + pcie1: pcie@1c08000 { device_type = "pci"; compatible = "qcom,pcie-sm8550"; reg = <0x0 0x01c08000 0x0 0x3000>, @@ -1979,6 +1995,128 @@ #reset-cells = <1>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-43050a01", "qcom,adreno"; + reg = <0x0 0x03d00000 0x0 0x40000>, + <0x0 0x03d9e000 0x0 0x1000>, + <0x0 0x03d61000 0x0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x0>, + <&adreno_smmu 1 0x0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + status = "disabled"; + + zap-shader { + memory-region = <&gpu_micro_code_mem>; + }; + + /* Speedbin needs more work on A740+, keep only lower freqs */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-680000000 { + opp-hz = /bits/ 64 <680000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-615000000 { + opp-hz = /bits/ 64 <615000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-475000000 { + opp-hz = /bits/ 64 <475000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + opp-401000000 { + opp-hz = /bits/ 64 <401000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-348000000 { + opp-hz = /bits/ 64 <348000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + opp-295000000 { + opp-hz = /bits/ 64 <295000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible = "qcom,adreno-gmu-740.1", "qcom,adreno-gmu"; + reg = <0x0 0x03d6a000 0x0 0x35000>, + <0x0 0x03d50000 0x0 0x10000>, + <0x0 0x0b280000 0x0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_AHB_CLK>, + <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc GPU_CC_HUB_CX_INT_CLK>, + <&gpucc GPU_CC_DEMET_CLK>; + clock-names = "ahb", + "gmu", + "cxo", + "axi", + "memnoc", + "hub", + "demet"; + + power-domains = <&gpucc GPU_CC_CX_GDSC>, + <&gpucc GPU_CC_GX_GDSC>; + power-domain-names = "cx", + "gx"; + + iommus = <&adreno_smmu 5 0x0>; + + qcom,qmp = <&aoss_qmp>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sm8550-gpucc"; reg = <0 0x03d90000 0 0xa000>; @@ -1990,6 +2128,89 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8550-smmu-500", "qcom,adreno-smmu", + "qcom,smmu-500", "arm,mmu-500"; + reg = <0x0 0x03da0000 0x0 0x40000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc GPU_CC_AHB_CLK>; + clock-names = "hlos", + "bus", + "iface", + "ahb"; + power-domains = <&gpucc GPU_CC_CX_GDSC>; + dma-coherent; + }; + + ipa: ipa@3f40000 { + compatible = "qcom,sm8550-ipa"; + + iommus = <&apps_smmu 0x4a0 0x0>, + <&apps_smmu 0x4a2 0x0>; + reg = <0 0x3f40000 0 0x10000>, + <0 0x3f50000 0 0x5000>, + <0 0x3e04000 0 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8550-mpss-pas"; reg = <0x0 0x04080000 0x0 0x4040>; @@ -2040,17 +2261,13 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; #clock-cells = <0>; clock-output-names = "wsa2-mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa2_swr_active>; #sound-dai-cells = <1>; }; - swr3: soundwire-controller@6ab0000 { + swr3: soundwire@6ab0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ab0000 0 0x10000>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; @@ -2058,6 +2275,9 @@ clock-names = "iface"; label = "WSA2"; + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -2086,17 +2306,12 @@ <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&rx_swr_active>; #sound-dai-cells = <1>; }; - swr1: soundwire-controller@6ad0000 { + swr1: soundwire@6ad0000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06ad0000 0 0x10000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; @@ -2104,18 +2319,21 @@ clock-names = "iface"; label = "RX"; - qcom,din-ports = <0>; - qcom,dout-ports = <10>; + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <1>; + qcom,dout-ports = <11>; - qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff>; - qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; - qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff>; - qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff>; - qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff>; - qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff>; + qcom,ports-sinterval = /bits/ 16 <0x03 0x3f 0x1f 0x07 0x00 0x18f 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x01 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0x0f 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff>; #address-cells = <2>; #size-cells = <0>; @@ -2131,14 +2349,9 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - - assigned-clock-rates = <19200000>; #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&tx_swr_active>; #sound-dai-cells = <1>; }; @@ -2151,17 +2364,12 @@ <&lpass_vamacro>; clock-names = "mclk", "macro", "dcodec", "fsgen"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; - #clock-cells = <0>; clock-output-names = "mclk"; - pinctrl-names = "default"; - pinctrl-0 = <&wsa_swr_active>; #sound-dai-cells = <1>; }; - swr0: soundwire-controller@6b10000 { + swr0: soundwire@6b10000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06b10000 0 0x10000>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; @@ -2169,6 +2377,9 @@ clock-names = "iface"; label = "WSA"; + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <9>; @@ -2188,16 +2399,19 @@ status = "disabled"; }; - swr2: soundwire-controller@6d30000 { + swr2: soundwire@6d30000 { compatible = "qcom,soundwire-v2.0.0"; reg = <0 0x06d30000 0 0x10000>; interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "core", "wakeup"; - clocks = <&lpass_vamacro>; + clocks = <&lpass_txmacro>; clock-names = "iface"; label = "TX"; + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + qcom,din-ports = <4>; qcom,dout-ports = <0>; qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; @@ -2224,9 +2438,6 @@ <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "mclk", "macro", "dcodec"; - assigned-clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>; - assigned-clock-rates = <19200000>; - #clock-cells = <0>; clock-output-names = "fsgen"; #sound-dai-cells = <1>; @@ -2923,8 +3134,8 @@ interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, - <&pdc 15 IRQ_TYPE_EDGE_RISING>, - <&pdc 14 IRQ_TYPE_EDGE_RISING>; + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>; interrupt-names = "hs_phy_irq", "ss_phy_irq", "dm_hs_phy_irq", diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts new file mode 100644 index 000000000000..9d916edb1c73 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts @@ -0,0 +1,727 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 MTP"; + compatible = "qcom,sm8650-mtp", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pcie1 { + wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie1_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l3e_0p9>; + vdda-pll-supply = <&vreg_l3i_1p2>; + vdda-qref-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&pm8550_gpios { + sdc2_card_det_n: sdc2-card-det-state { + pins = "gpio12"; + function = "normal"; + bias-pull-up; + input-enable; + output-disable; + power-source = <1>; /* 1.8 V */ + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l9b_2p9>; + vqmmc-supply = <&vreg_l8b_1p8>; + bus-width = <4>; + no-sdio; + no-mmc; + + pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>; + pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&swr0 { + status = "okay"; + + /* WSA8845, Speaker Left */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; + + /* WSA8845, Speaker Right */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C + * USB SS -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts new file mode 100644 index 000000000000..592a67a47c78 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sm8650.dtsi" +#include "pm8010.dtsi" +#include "pm8550.dtsi" +#include "pm8550b.dtsi" +#define PMK8550VE_SID 8 +#include "pm8550ve.dtsi" +#include "pm8550vs.dtsi" +#include "pmk8550.dtsi" +#include "pmr735d_a.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. SM8650 QRD"; + compatible = "qcom,sm8650-qrd", "qcom,sm8650"; + + aliases { + serial0 = &uart15; + serial1 = &uart14; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&volume_up_n>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + pmic-glink { + compatible = "qcom,sm8650-pmic-glink", + "qcom,sm8550-pmic-glink", + "qcom,pmic-glink"; + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + + power-role = "dual"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_hs_in: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_ss_in: endpoint { + remote-endpoint = <&usb_1_dwc3_ss>; + }; + }; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob1>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l11-supply = <&vreg_s1c_1p2>; + vdd-l12-supply = <&vreg_s6c_1p8>; + vdd-l15-supply = <&vreg_s6c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + qcom,pmic-id = "b"; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2720000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p1: ldo5 { + regulator-name = "vreg_l5b_3p1"; + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_1p8: ldo7 { + regulator-name = "vreg_l7b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_1p8: ldo8 { + regulator-name = "vreg_l8b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11b_1p2: ldo11 { + regulator-name = "vreg_l11b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p8: ldo12 { + regulator-name = "vreg_l12b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p2: ldo14 { + regulator-name = "vreg_l14b_3p2"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p8: ldo16 { + regulator-name = "vreg_l16b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s1c_1p2>; + vdd-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + + qcom,pmic-id = "c"; + + vreg_s1c_1p2: smps1 { + regulator-name = "vreg_s1c_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1348000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2c_0p8: smps2 { + regulator-name = "vreg_s2c_0p8"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1036000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s3c_0p9: smps3 { + regulator-name = "vreg_s3c_0p9"; + regulator-min-microvolt = <976000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s4c_1p2: smps4 { + regulator-name = "vreg_s4c_1p2"; + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1280000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5c_0p7: smps5 { + regulator-name = "vreg_s5c_0p7"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s6c_1p8: smps6 { + regulator-name = "vreg_s6c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-name = "vreg_l3c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "d"; + + vreg_l1d_0p88: ldo1 { + regulator-name = "vreg_l1d_0p88"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "e"; + + vreg_l3e_0p9: ldo3 { + regulator-name = "vreg_l3e_0p9"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pm8550vs-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s3c_0p9>; + + qcom,pmic-id = "g"; + + vreg_l1g_0p91: ldo1 { + regulator-name = "vreg_l1g_0p91"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3g_0p91: ldo3 { + regulator-name = "vreg_l3g_0p91"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-5 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + + vdd-l1-supply = <&vreg_s3c_0p9>; + vdd-l2-supply = <&vreg_s3c_0p9>; + vdd-l3-supply = <&vreg_s1c_1p2>; + vdd-s4-supply = <&vph_pwr>; + + qcom,pmic-id = "i"; + + vreg_s4i_0p85: smps4 { + regulator-name = "vreg_s4i_0p85"; + regulator-min-microvolt = <852000>; + regulator-max-microvolt = <1004000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_0p88: ldo1 { + regulator-name = "vreg_l1i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_0p88: ldo2 { + regulator-name = "vreg_l2i_0p88"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_1p2: ldo3 { + regulator-name = "vreg_l3i_0p91"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&ipa { + qcom,gsi-loader = "self"; + memory-region = <&ipa_fw_mem>; + firmware-name = "qcom/sm8650/ipa_fws.mbn"; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&vreg_l3i_1p2>; + + status = "okay"; + + panel@0 { + compatible = "visionox,vtdr6130"; + reg = <0>; + + reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + vddio-supply = <&vreg_l12b_1p8>; + vci-supply = <&vreg_l13b_3p0>; + vdd-supply = <&vreg_l11b_1p2>; + + pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>; + pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel0_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; +}; + +&mdss_dsi0_out { + remote-endpoint = <&panel0_in>; + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vdds-supply = <&vreg_l1i_0p88>; + + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&pcie_1_phy_aux_clk { + clock-frequency = <1000>; +}; + +&pcie0 { + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie0_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l1i_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pm8550_flash { + status = "okay"; + + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_YELLOW>; + led-sources = <1>, <4>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>, <3>; + led-max-microamp = <500000>; + flash-max-microamp = <2000000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + +&pm8550_gpios { + volume_up_n: volume-up-n-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + power-source = <1>; + }; +}; + +&pm8550_pwm { + status = "okay"; + + multi-led { + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + + #address-cells = <1>; + #size-cells = <0>; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_RED>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&pm8550b_eusb2_repeater { + vdd18-supply = <&vreg_l15b_1p8>; + vdd3-supply = <&vreg_l5b_3p1>; +}; + +&pmk8550_rtc { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sm8650/adsp.mbn", + "qcom/sm8650/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/sm8650/cdsp.mbn", + "qcom/sm8650/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sm8650/modem.mbn", + "qcom/sm8650/modem_dtb.mbn"; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&spi4 { + status = "okay"; + + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + + interrupt-parent = <&tlmm>; + interrupts = <162 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 161 GPIO_ACTIVE_LOW>; + + avdd-supply = <&vreg_l14b_3p2>; + + spi-max-frequency = <1000000>; + + touchscreen-size-x = <1080>; + touchscreen-size-y = <2400>; + + pinctrl-0 = <&ts_irq>, <&ts_reset>; + pinctrl-names = "default"; + }; +}; + +&tlmm { + /* Reserved I/Os for NFC */ + gpio-reserved-ranges = <32 8>; + + bt_default: bt-default-state { + bt-en-pins { + pins = "gpio17"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + sw-ctrl-pins { + pins = "gpio18"; + function = "gpio"; + bias-pull-down; + }; + }; + + disp0_reset_n_active: disp0-reset-n-active-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp0_reset_n_suspend: disp0-reset-n-suspend-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_active: mdp-vsync-active-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdp_vsync_suspend: mdp-vsync-suspend-state { + pins = "gpio86"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_irq: ts-irq-state { + pins = "gpio161"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + output-disable; + }; + + ts_reset: ts-reset-state { + pins = "gpio162"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&uart14 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn7850-bt"; + + clocks = <&rpmhcc RPMH_RF_CLK1>; + + vddio-supply = <&vreg_l3c_1p2>; + vddaon-supply = <&vreg_l15b_1p8>; + vdddig-supply = <&vreg_s3c_0p9>; + vddrfa0p8-supply = <&vreg_s3c_0p9>; + vddrfa1p2-supply = <&vreg_s1c_1p2>; + vddrfa1p9-supply = <&vreg_s6c_1p8>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&uart15 { + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17b_2p5>; + vcc-max-microamp = <1300000>; + vccq-supply = <&vreg_l1c_1p2>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l1d_0p88>; + vdda-pll-supply = <&vreg_l3i_1p2>; + + status = "okay"; +}; + +/* + * DPAUX -> WCD9395 -> USB_SBU -> USB-C + * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> WCD9395 -> USB-C + * USB SS -> NB7VPQ904MMUTWG -> USB-C + */ + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_hs_in>; +}; + +&usb_1_dwc3_ss { + remote-endpoint = <&pmic_glink_ss_in>; +}; + +&usb_1_hsphy { + vdd-supply = <&vreg_l1i_0p88>; + vdda12-supply = <&vreg_l3i_1p2>; + + phys = <&pm8550b_eusb2_repeater>; + + status = "okay"; +}; + +&usb_dp_qmpphy { + vdda-phy-supply = <&vreg_l3i_1p2>; + vdda-pll-supply = <&vreg_l3g_0p91>; + + status = "okay"; +}; + +&xo_board { + clock-frequency = <76800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi new file mode 100644 index 000000000000..2df77123a8c7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -0,0 +1,6013 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8650-dispcc.h> +#include <dt-bindings/clock/qcom,sm8650-gcc.h> +#include <dt-bindings/clock/qcom,sm8650-gpucc.h> +#include <dt-bindings/clock/qcom,sm8650-tcsr.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/firmware/qcom,scm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,sm8650-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/phy/phy-qcom-qmp.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/reset/qcom,sm8650-gpucc.h> +#include <dt-bindings/soc/qcom,gpr.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + + pcie_1_phy_aux_clk: pcie-1-phy-aux-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0 0>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + + L3_0: l3-cache { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a520"; + reg = <0 0x100>; + + clocks = <&cpufreq_hw 0>; + + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_0>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + + qcom,freq-domain = <&cpufreq_hw 0>; + + #cooling-cells = <2>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x200>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_200>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + + L2_200: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x300>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_200>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x400>; + + clocks = <&cpufreq_hw 3>; + + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_400>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 3>; + + #cooling-cells = <2>; + + L2_400: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x500>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_500>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + L2_500: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a720"; + reg = <0 0x600>; + + clocks = <&cpufreq_hw 1>; + + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_600>; + capacity-dmips-mhz = <1792>; + dynamic-power-coefficient = <238>; + + qcom,freq-domain = <&cpufreq_hw 1>; + + #cooling-cells = <2>; + + L2_600: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-x4"; + reg = <0 0x700>; + + clocks = <&cpufreq_hw 2>; + + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + + enable-method = "psci"; + next-level-cache = <&L2_700>; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <588>; + + qcom,freq-domain = <&cpufreq_hw 2>; + + #cooling-cells = <2>; + + L2_700: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + SILVER_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "silver-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <550>; + exit-latency-us = <750>; + min-residency-us = <6700>; + local-timer-stop; + }; + + GOLD_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <600>; + exit-latency-us = <1300>; + min-residency-us = <8136>; + local-timer-stop; + }; + + GOLD_PLUS_CPU_SLEEP_0: cpu-sleep-2-0 { + compatible = "arm,idle-state"; + idle-state-name = "gold-plus-rail-power-collapse"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <500>; + exit-latency-us = <1350>; + min-residency-us = <7480>; + local-timer-stop; + }; + }; + + domain-idle-states { + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x41000044>; + entry-latency-us = <750>; + exit-latency-us = <2350>; + min-residency-us = <9144>; + }; + + CLUSTER_SLEEP_1: cluster-sleep-1 { + compatible = "domain-idle-state"; + arm,psci-suspend-param = <0x4100c344>; + entry-latency-us = <2800>; + exit-latency-us = <4400>; + min-residency-us = <10150>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm8650", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,sm8650-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,sm8650-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@a0000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0xa0000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&SILVER_CPU_SLEEP_0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_CPU_SLEEP_0>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD>; + domain-idle-states = <&GOLD_PLUS_CPU_SLEEP_0>; + }; + + CLUSTER_PD: power-domain-cluster { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_SLEEP_0>, + <&CLUSTER_SLEEP_1>; + }; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: hyp@80000000 { + reg = <0 0x80000000 0 0xe00000>; + no-map; + }; + + cpusys_vm_mem: cpusys-vm@80e00000 { + reg = <0 0x80e00000 0 0x400000>; + no-map; + }; + + /* Merged xbl_dtlog, xbl_ramdump and aop_image regions */ + xbl_dt_log_merged_mem: xbl-dt-log-merged@81a00000 { + reg = <0 0x81a00000 0 0x260000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0 0x81c60000 0 0x20000>; + no-map; + }; + + /* Merged aop_config, tme_crash_dump, tme_log and uefi_log regions */ + aop_tme_uefi_merged_mem: aop-tme-uefi-merged@81c80000 { + reg = <0 0x81c80000 0 0x74000>; + no-map; + }; + + /* Secdata region can be reused by apps */ + + smem: smem@81d00000 { + compatible = "qcom,smem"; + reg = <0 0x81d00000 0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + adsp_mhi_mem: adsp-mhi@81f00000 { + reg = <0 0x81f00000 0 0x20000>; + no-map; + }; + + pvmfw_mem: pvmfw@824a0000 { + reg = <0 0x824a0000 0 0x100000>; + no-map; + }; + + global_sync_mem: global-sync@82600000 { + reg = <0 0x82600000 0 0x100000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0 0x82700000 0 0x100000>; + no-map; + }; + + qdss_mem: qdss@82800000 { + reg = <0 0x82800000 0 0x2000000>; + no-map; + }; + + mpss_dsm_mem: mpss-dsm@86b00000 { + reg = <0 0x86b00000 0 0x4900000>; + no-map; + }; + + mpss_dsm_mem_2: mpss-dsm-2@8b400000 { + reg = <0 0x8b400000 0 0x800000>; + no-map; + }; + + mpss_mem: mpss@8bc00000 { + reg = <0 0x8bc00000 0 0xf400000>; + no-map; + }; + + q6_mpss_dtb_mem: q6-mpss-dtb@9b000000 { + reg = <0 0x9b000000 0 0x80000>; + no-map; + }; + + ipa_fw_mem: ipa-fw@9b080000 { + reg = <0 0x9b080000 0 0x10000>; + no-map; + }; + + ipa_gsi_mem: ipa-gsi@9b090000 { + reg = <0 0x9b090000 0 0xa000>; + no-map; + }; + + gpu_micro_code_mem: gpu-micro-code@9b09a000 { + reg = <0 0x9b09a000 0 0x2000>; + no-map; + }; + + spss_region_mem: spss@9b0a0000 { + reg = <0 0x9b0a0000 0 0x1e0000>; + no-map; + }; + + /* First part of the "SPU secure shared memory" region */ + spu_tz_shared_mem: spu-tz-shared@9b280000 { + reg = <0 0x9b280000 0 0x60000>; + no-map; + }; + + /* Second part of the "SPU secure shared memory" region */ + spu_modem_shared_mem: spu-modem-shared@9b2e0000 { + reg = <0 0x9b2e0000 0 0x20000>; + no-map; + }; + + camera_mem: camera@9b300000 { + reg = <0 0x9b300000 0 0x800000>; + no-map; + }; + + video_mem: video@9bb00000 { + reg = <0 0x9bb00000 0 0x800000>; + no-map; + }; + + cvp_mem: cvp@9c300000 { + reg = <0 0x9c300000 0 0x700000>; + no-map; + }; + + cdsp_mem: cdsp@9ca00000 { + reg = <0 0x9ca00000 0 0x1400000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@9de00000 { + reg = <0 0x9de00000 0 0x80000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@9de80000 { + reg = <0 0x9de80000 0 0x80000>; + no-map; + }; + + adspslpi_mem: adspslpi@9df00000 { + reg = <0 0x9df00000 0 0x4080000>; + no-map; + }; + + rmtfs_mem: rmtfs@d7c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xd7c00000 0 0x400000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>; + }; + + /* Merged tz_reserved, xbl_sc, cpucp_fw and qtee regions */ + tz_merged_mem: tz-merged@d8000000 { + reg = <0 0xd8000000 0 0x800000>; + no-map; + }; + + hwfence_shbuf: hwfence-shbuf@e6440000 { + reg = <0 0xe6440000 0 0x2dd000>; + no-map; + }; + + trust_ui_vm_mem: trust-ui-vm@f3800000 { + reg = <0 0xf3800000 0 0x4400000>; + no-map; + }; + + oem_vm_mem: oem-vm@f7c00000 { + reg = <0 0xf7c00000 0 0x4c00000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0 0xff800000 0 0x600000>; + no-map; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <443>, <429>; + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,smem = <435>, <428>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,sm8650-gcc"; + reg = <0 0x00100000 0 0x1f4200>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&sleep_clk>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, + <&ufs_mem_phy 0>, + <&ufs_mem_phy 1>, + <&ufs_mem_phy 2>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PIPE_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipcc: mailbox@406000 { + compatible = "qcom,sm8650-ipcc", "qcom,ipcc"; + reg = <0 0x00406000 0 0x1000>; + + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + + #mbox-cells = <2>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3f>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0>; + + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_1: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c8: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart14: serial@898000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + uart15: serial@89c000 { + compatible = "qcom,geni-debug-uart"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart15_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + }; + + i2c_master_hub_0: geniqup@9c0000 { + compatible = "qcom,geni-se-i2c-master-hub"; + reg = <0 0x009c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_I2C_S_AHB_CLK>; + clock-names = "s-ahb"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c_hub_0: i2c@980000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00980000 0 0x4000>; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S0_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_1: i2c@984000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00984000 0 0x4000>; + + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S1_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_2: i2c@988000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00988000 0 0x4000>; + + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S2_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_3: i2c@98c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0098c000 0 0x4000>; + + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S3_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_4: i2c@990000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00990000 0 0x4000>; + + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S4_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_5: i2c@994000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00994000 0 0x4000>; + + interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S5_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_6: i2c@998000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x00998000 0 0x4000>; + + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S6_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_7: i2c@99c000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x0099c000 0 0x4000>; + + interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S7_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_8: i2c@9a0000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a0000 0 0x4000>; + + interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S8_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_hub_9: i2c@9a4000 { + compatible = "qcom,geni-i2c-master-hub"; + reg = <0 0x009a4000 0 0x4000>; + + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_I2C_S9_CLK>, + <&gcc GCC_QUPV3_I2C_CORE_CLK>; + clock-names = "se", + "core"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_I2C QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&hub_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,sm8650-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0xc>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0xb6 0>; + dma-coherent; + + status = "disabled"; + }; + + qupv3_id_0: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core"; + + iommus = <&apps_smmu 0xa3 0>; + + dma-coherent; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,sm8650-cnoc-main"; + reg = <0 0x01500000 0 0x14080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,sm8650-config-noc"; + reg = <0 0x01600000 0 0x6200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,sm8650-system-noc"; + reg = <0 0x01680000 0 0x1d080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_noc: interconnect@16c0000 { + compatible = "qcom,sm8650-pcie-anoc"; + reg = <0 0x016c0000 0 0x12200>; + + clocks = <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CFG_NOC_PCIE_ANOC_AHB_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,sm8650-aggre1-noc"; + reg = <0 0x016e0000 0 0x16400>; + + clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,sm8650-aggre2-noc"; + reg = <0 0x01700000 0 0x1e400>; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,sm8650-mmss-noc"; + reg = <0 0x01780000 0 0x5b800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + rng: rng@10c3000 { + compatible = "qcom,sm8650-trng", "qcom,trng"; + reg = <0 0x010c3000 0 0x1000>; + }; + + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_0_GDSC>; + + iommu-map = <0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <0>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x60200000 0 0x100000>, + <0x02000000 0 0x60300000 0 0x60300000 0 0x3d00000>; + + dma-coherent; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8650-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550"; + reg = <0 0x01c08000 0 0x3000>, + <0 0x40000000 0 0xf1d>, + <0 0x40000f20 0 0xa8>, + <0 0x40001000 0 0x1000>, + <0 0x40100000 0 0x100000>; + reg-names = "parf", + "dbi", + "elbi", + "atu", + "config"; + + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "noc_aggr", + "cnoc_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; + + interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &cnoc_main SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "pcie-mem", + "cpu-pcie"; + + power-domains = <&gcc PCIE_1_GDSC>; + + iommu-map = <0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0 0 0 0x7>; + #interrupt-cells = <1>; + + linux,pci-domain = <1>; + num-lanes = <2>; + bus-range = <0 0xff>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + dma-coherent; + + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0 0x00000000 0 0x40200000 0 0x100000>, + <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8650-qmp-gen4x2-pcie-phy"; + reg = <0 0x01c0e000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "rchng", + "pipe"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", + "phy_nocsr"; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + cryptobam: dma-controller@1dc4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0 0x01dc4000 0 0x28000>; + + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + + #dma-cells = <1>; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + + qcom,ee = <0>; + qcom,controlled-remotely; + }; + + crypto: crypto@1dfa000 { + compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce"; + reg = <0 0x01dfa000 0 0x6000>; + + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "memory"; + + dmas = <&cryptobam 4>, <&cryptobam 5>; + dma-names = "rx", "tx"; + + iommus = <&apps_smmu 0x480 0>, + <&apps_smmu 0x481 0>; + }; + + ufs_mem_phy: phy@1d80000 { + compatible = "qcom,sm8650-qmp-ufs-phy"; + reg = <0 0x01d80000 0 0x2000>; + + clocks = <&tcsr TCSR_UFS_CLKREF_EN>, + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; + clock-names = "ref", + "ref_aux"; + + resets = <&ufs_mem_hc 0>; + reset-names = "ufsphy"; + + power-domains = <&gcc UFS_MEM_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + ufs_mem_hc: ufs@1d84000 { + compatible = "qcom,sm8650-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; + reg = <0 0x01d84000 0 0x3000>; + + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, + <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, + <&gcc GCC_UFS_PHY_AHB_CLK>, + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, + <&tcsr TCSR_UFS_PAD_CLKREF_EN>, + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + clock-names = "core_clk", + "bus_aggr_clk", + "iface_clk", + "core_clk_unipro", + "ref_clk", + "tx_lane0_sync_clk", + "rx_lane0_sync_clk", + "rx_lane1_sync_clk"; + freq-table-hz = <100000000 403000000>, + <0 0>, + <0 0>, + <100000000 403000000>, + <100000000 403000000>, + <0 0>, + <0 0>, + <0 0>; + + resets = <&gcc GCC_UFS_PHY_BCR>; + reset-names = "rst"; + + interconnects = <&aggre1_noc MASTER_UFS_MEM QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_UFS_MEM_CFG QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "ufs-ddr", + "cpu-ufs"; + + power-domains = <&gcc UFS_PHY_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + iommus = <&apps_smmu 0x60 0>; + + lanes-per-direction = <2>; + qcom,ice = <&ice>; + + phys = <&ufs_mem_phy>; + phy-names = "ufsphy"; + + #reset-cells = <1>; + + status = "disabled"; + }; + + ice: crypto@1d88000 { + compatible = "qcom,sm8650-inline-crypto-engine", + "qcom,inline-crypto-engine"; + reg = <0 0x01d88000 0 0x8000>; + + clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + + #hwlock-cells = <1>; + }; + + tcsr: clock-controller@1fc0000 { + compatible = "qcom,sm8650-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0xa0000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8650-gpucc"; + reg = <0 0x03d90000 0 0xa000>; + + clocks = <&bi_tcxo_div2>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + ipa: ipa@3f40000 { + compatible = "qcom,sm8650-ipa", "qcom,sm8550-ipa"; + + iommus = <&apps_smmu 0x4a0 0x0>, + <&apps_smmu 0x4a2 0x0>; + reg = <0 0x3f40000 0 0x10000>, + <0 0x3f50000 0 0x5000>, + <0 0x3e04000 0 0xfc000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&aggre2_noc MASTER_IPA 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_IPA_CFG 0>; + interconnect-names = "memory", + "config"; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sm8650-mpss-pas"; + reg = <0 0x04080000 0 0x4040>; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MSS>; + power-domain-names = "cx", + "mss"; + + memory-region = <&mpss_mem>, <&q6_mpss_dtb_mem>, + <&mpss_dsm_mem>, <&mpss_dsm_mem_2>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <1>; + + label = "mpss"; + }; + }; + + lpass_wsa2macro: codec@6aa0000 { + compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06aa0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA2_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "wsa2-mclk"; + #sound-dai-cells = <1>; + }; + + swr3: soundwire@6ab0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ab0000 0 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsa2macro>; + clock-names = "iface"; + label = "WSA2"; + + pinctrl-0 = <&wsa2_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_rxmacro: codec@6ac0000 { + compatible = "qcom,sm8650-lpass-rx-macro", "qcom,sm8550-lpass-rx-macro"; + reg = <0 0x06ac0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_RX_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr1: soundwire@6ad0000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06ad0000 0 0x10000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_rxmacro>; + clock-names = "iface"; + label = "RX"; + + pinctrl-0 = <&rx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <0>; + qcom,dout-ports = <11>; + + qcom,ports-sinterval = /bits/ 16 <0x03 0x1f 0x1f 0x07 0x03 0xff 0xff 0x31 0xff 0xff 0xff>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0b 0x09 0x01 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0b 0x00 0x00 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0x03 0xff 0xff 0xff 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0x06 0xff 0xff 0xff 0xff 0xff 0x0f 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0x18 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0x01 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0x01 0x03 0xff 0xff 0x00 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0x01 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_txmacro: codec@6ae0000 { + compatible = "qcom,sm8650-lpass-tx-macro", "qcom,sm8550-lpass-tx-macro"; + reg = <0 0x06ae0000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + lpass_wsamacro: codec@6b00000 { + compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; + reg = <0 0x06b00000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_WSA_CORE_TX_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&lpass_vamacro>; + clock-names = "mclk", + "macro", + "dcodec", + "fsgen"; + + #clock-cells = <0>; + clock-output-names = "mclk"; + #sound-dai-cells = <1>; + }; + + swr0: soundwire@6b10000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06b10000 0 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lpass_wsamacro>; + clock-names = "iface"; + label = "WSA"; + + pinctrl-0 = <&wsa_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <9>; + + qcom,ports-sinterval = /bits/ 16 <0x07 0x1f 0x3f 0x07 0x1f 0x3f 0x18f 0xff 0xff 0x0f 0x0f 0xff 0x31f>; + qcom,ports-offset1 = /bits/ 8 <0x01 0x03 0x05 0x02 0x04 0x15 0x00 0xff 0xff 0x06 0x0d 0xff 0x00>; + qcom,ports-offset2 = /bits/ 8 <0xff 0x07 0x1f 0xff 0x07 0x1f 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x0f>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0x08 0xff 0xff 0xff 0xff 0xff 0x18>; + qcom,ports-block-pack-mode = /bits/ 8 <0x00 0x01 0x01 0x00 0x01 0x01 0x00 0x00 0x00 0x01 0x01 0x00 0x00>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + swr2: soundwire@6d30000 { + compatible = "qcom,soundwire-v2.0.0"; + reg = <0 0x06d30000 0 0x10000>; + interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "core", "wakeup"; + clocks = <&lpass_txmacro>; + clock-names = "iface"; + label = "TX"; + + pinctrl-0 = <&tx_swr_active>; + pinctrl-names = "default"; + + qcom,din-ports = <4>; + qcom,dout-ports = <0>; + + qcom,ports-sinterval-low = /bits/ 8 <0x01 0x01 0x03 0x03>; + qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x01 0x01>; + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00 0x00>; + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff>; + qcom,ports-lane-control = /bits/ 8 <0x01 0x02 0x00 0x00>; + + #address-cells = <2>; + #size-cells = <0>; + #sound-dai-cells = <1>; + status = "disabled"; + }; + + lpass_vamacro: codec@6d44000 { + compatible = "qcom,sm8650-lpass-va-macro", "qcom,sm8550-lpass-va-macro"; + reg = <0 0x06d44000 0 0x1000>; + clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "mclk", + "macro", + "dcodec"; + + #clock-cells = <0>; + clock-output-names = "fsgen"; + #sound-dai-cells = <1>; + }; + + lpass_tlmm: pinctrl@6e80000 { + compatible = "qcom,sm8650-lpass-lpi-pinctrl"; + reg = <0 0x06e80000 0 0x20000>; + + clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>, + <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "core", "audio"; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpass_tlmm 0 0 23>; + + tx_swr_active: tx-swr-active-state { + clk-pins { + pins = "gpio0"; + function = "swr_tx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio1", "gpio2", "gpio14"; + function = "swr_tx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + rx_swr_active: rx-swr-active-state { + clk-pins { + pins = "gpio3"; + function = "swr_rx_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio4", "gpio5"; + function = "swr_rx_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + dmic01_default: dmic01-default-state { + clk-pins { + pins = "gpio6"; + function = "dmic1_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio7"; + function = "dmic1_data"; + drive-strength = <8>; + input-enable; + }; + }; + + dmic02_default: dmic02-default-state { + clk-pins { + pins = "gpio8"; + function = "dmic2_clk"; + drive-strength = <8>; + output-high; + }; + + data-pins { + pins = "gpio9"; + function = "dmic2_data"; + drive-strength = <8>; + input-enable; + }; + }; + + wsa_swr_active: wsa-swr-active-state { + clk-pins { + pins = "gpio10"; + function = "wsa_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio11"; + function = "wsa_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + + wsa2_swr_active: wsa2-swr-active-state { + clk-pins { + pins = "gpio15"; + function = "wsa2_swr_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio16"; + function = "wsa2_swr_data"; + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; + }; + }; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,sm8650-lpass-lpiaon-noc"; + reg = <0 0x07400000 0 0x19080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,sm8650-lpass-lpicx-noc"; + reg = <0 0x07430000 0 0x3a200>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,sm8650-lpass-ag-noc"; + reg = <0 0x07e40000 0 0xe080>; + + #interconnect-cells = <2>; + + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + sdhc_2: mmc@8804000 { + compatible = "qcom,sm8650-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", + "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "core", + "xo"; + + interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "sdhc-ddr", + "cpu-sdhc"; + + power-domains = <&rpmhpd RPMHPD_CX>; + operating-points-v2 = <&sdhc2_opp_table>; + + iommus = <&apps_smmu 0x540 0>; + + bus-width = <4>; + + /* Forbid SDR104/SDR50 - broken hw! */ + sdhci-caps-mask = <0x3 0>; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + + dma-coherent; + + status = "disabled"; + + sdhc2_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss: display-subsystem@ae00000 { + compatible = "qcom,sm8650-mdss"; + reg = <0 0x0ae00000 0 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + + resets = <&dispcc DISP_CC_MDSS_CORE_BCR>; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ALWAYS>, + <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "mdp0-mem", + "mdp1-mem"; + + power-domains = <&dispcc MDSS_GDSC>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + mdss_mdp: display-controller@ae01000 { + compatible = "qcom,sm8650-dpu"; + reg = <0 0x0ae01000 0 0x8f000>, + <0 0x0aeb0000 0 0x2008>; + reg-names = "mdp", + "vbif"; + + interrupts-extended = <&mdss 0>; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + + dpu_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + + port@2 { + reg = <2>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + mdss_dsi0: dsi@ae94000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi0_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi0_out: endpoint { + }; + }; + }; + + mdss_dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + mdss_dsi0_phy: phy@ae95000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae95000 0 0x200>, + <0 0x0ae95200 0 0x280>, + <0 0x0ae95500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dsi1: dsi@ae96000 { + compatible = "qcom,sm8650-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae96000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupts-extended = <&mdss 5>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + operating-points-v2 = <&mdss_dsi_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&mdss_dsi1_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@ae97000 { + compatible = "qcom,sm8650-dsi-phy-4nm"; + reg = <0 0x0ae97000 0 0x200>, + <0 0x0ae97200 0 0x280>, + <0 0x0ae97500 0 0x400>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", + "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + + status = "disabled"; + }; + + mdss_dp0: displayport-controller@af54000 { + compatible = "qcom,sm8650-dp"; + reg = <0 0xaf54000 0 0x104>, + <0 0xaf54200 0 0xc0>, + <0 0xaf55000 0 0x770>, + <0 0xaf56000 0 0x9c>, + <0 0xaf57000 0 0x9c>; + + interrupts-extended = <&mdss 12>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel"; + + assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>; + assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&dp_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + status = "disabled"; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-162000000 { + opp-hz = /bits/ 64 <162000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + }; + }; + + dispcc: clock-controller@af00000 { + compatible = "qcom,sm8650-dispcc"; + reg = <0 0x0af00000 0 0x20000>; + + clocks = <&bi_tcxo_div2>, + <&bi_tcxo_ao_div2>, + <&gcc GCC_DISP_AHB_CLK>, + <&sleep_clk>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>, + <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <0>, /* dp1 */ + <0>, + <0>, /* dp2 */ + <0>, + <0>, /* dp3 */ + <0>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + required-opps = <&rpmhpd_opp_low_svs>; + + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + status = "disabled"; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8650-snps-eusb2-phy", + "qcom,sm8550-snps-eusb2-phy"; + reg = <0 0x088e3000 0 0x154>; + + clocks = <&tcsr TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + + #phy-cells = <0>; + + status = "disabled"; + }; + + usb_dp_qmpphy: phy@88e8000 { + compatible = "qcom,sm8650-qmp-usb3-dp-phy"; + reg = <0 0x088e8000 0 0x3000>; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "aux", + "ref", + "com_aux", + "usb3_pipe"; + + resets = <&gcc GCC_USB3_PHY_PRIM_BCR>, + <&gcc GCC_USB3_DP_PHY_PRIM_BCR>; + reset-names = "phy", + "common"; + + power-domains = <&gcc USB3_PHY_GDSC>; + + #clock-cells = <1>; + #phy-cells = <1>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_dp_qmpphy_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_dp_qmpphy_usb_ss_in: endpoint { + }; + }; + + port@2 { + reg = <2>; + + usb_dp_qmpphy_dp_in: endpoint { + }; + }; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8650-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + + interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 15 IRQ_TYPE_EDGE_RISING>, + <&pdc 14 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "hs_phy_irq", + "ss_phy_irq", + "dm_hs_phy_irq", + "dp_hs_phy_irq"; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&tcsr TCSR_USB3_CLKREF_EN>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi", + "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + power-domains = <&gcc USB30_PRIM_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&apps_smmu 0x40 0>; + + phys = <&usb_1_hsphy>, + <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>; + phy-names = "usb2-phy", + "usb3-phy"; + + snps,hird-threshold = /bits/ 8 <0x0>; + snps,usb2-gadget-lpm-disable; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,usb3_lpm_capable; + snps,usb2-lpm-disable; + snps,has-lpm-erratum; + tx-fifo-resize; + + dma-coherent; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_1_dwc3_hs: endpoint { + }; + }; + + port@1 { + reg = <1>; + + usb_1_dwc3_ss: endpoint { + }; + }; + }; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm8650-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + + interrupt-parent = <&intc>; + + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 716 12>, + <138 251 5>, <143 244 4>; + + #interrupt-cells = <2>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c228000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c228000 0 0x1000>, /* TM */ + <0 0x0c222000 0 0x1000>; /* SROT */ + + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <15>; + + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c229000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c229000 0 0x1000>, /* TM */ + <0 0x0c223000 0 0x1000>; /* SROT */ + + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <16>; + + #thermal-sensor-cells = <1>; + }; + + tsens2: thermal-sensor@c22a000 { + compatible = "qcom,sm8650-tsens", "qcom,tsens-v2"; + reg = <0 0x0c22a000 0 0x1000>, /* TM */ + <0 0x0c224000 0 0x1000>; /* SROT */ + + interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", + "critical"; + + #qcom,sensors = <13>; + + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-management@c300000 { + compatible = "qcom,sm8650-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x400>; + + interrupt-parent = <&ipcc>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + }; + + sram@c3f0000 { + compatible = "qcom,rpmh-stats"; + reg = <0 0x0c3f0000 0 0x400>; + }; + + spmi_bus: spmi@c400000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0x0c400000 0 0x3000>, + <0 0x0c500000 0 0x4000000>, + <0 0x0c440000 0 0x80000>, + <0 0x0c4c0000 0 0x20000>, + <0 0x0c42d000 0 0x4000>; + reg-names = "core", + "chnls", + "obsrvr", + "intr", + "cnfg"; + + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "periph_irq"; + + qcom,ee = <0>; + qcom,channel = <0>; + qcom,bus-id = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + + #address-cells = <2>; + #size-cells = <0>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8650-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 211>; + + wakeup-parent = <&pdc>; + + hub_i2c0_data_clk: hub-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "i2chub0_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c1_data_clk: hub-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio66", "gpio67"; + function = "i2chub0_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c2_data_clk: hub-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "i2chub0_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c3_data_clk: hub-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio70", "gpio71"; + function = "i2chub0_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c4_data_clk: hub-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "i2chub0_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c5_data_clk: hub-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio74", "gpio75"; + function = "i2chub0_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c6_data_clk: hub-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "i2chub0_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c7_data_clk: hub-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio78", "gpio79"; + function = "i2chub0_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c8_data_clk: hub-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio206", "gpio207"; + function = "i2chub0_se8"; + drive-strength = <2>; + bias-pull-up; + }; + + hub_i2c9_data_clk: hub-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "i2chub0_se9"; + drive-strength = <2>; + bias-pull-up; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio94"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio95"; + function = "pcie0_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio98"; + function = "pcie1_clk_req_n"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio60", "gpio61"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio63"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio60", "gpio61", "gpio62"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio3"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio7"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio11"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio15"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio19"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio23"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio27"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart14_default: qup-uart14-default-state { + /* TX, RX */ + pins = "gpio26", "gpio27"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart14_cts_rts: qup-uart14-cts-rts-state { + /* CTS, RTS */ + pins = "gpio24", "gpio25"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-down; + }; + + qup_uart15_default: qup-uart15-default-state { + /* TX, RX */ + pins = "gpio30", "gpio31"; + function = "qup2_se7"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_sleep: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <2>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <2>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_default: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-pins { + pins = "sdc2_cmd"; + drive-strength = <10>; + bias-pull-up; + }; + + data-pins { + pins = "sdc2_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm8650-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + + dma-coherent; + }; + + intc: interrupt-controller@17100000 { + compatible = "arm,gic-v3"; + reg = <0 0x17100000 0 0x10000>, /* GICD */ + <0 0x17180000 0 0x200000>; /* GICR * 8 */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17140000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17140000 0 0x20000>; + + msi-controller; + #msi-cells = <1>; + }; + }; + + timer@17420000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17420000 0 0x1000>; + + ranges = <0 0 0 0x20000000>; + #address-cells = <1>; + #size-cells = <1>; + + frame@17421000 { + reg = <0x17421000 0x1000>, + <0x17422000 0x1000>; + + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <0>; + }; + + frame@17423000 { + reg = <0x17423000 0x1000>; + + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17425000 { + reg = <0x17425000 0x1000>; + + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17427000 { + reg = <0x17427000 0x1000>; + + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17429000 { + reg = <0x17429000 0x1000>; + + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1742b000 { + reg = <0x1742b000 0x1000>; + + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1742d000 { + reg = <0x1742d000 0x1000>; + + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@17a00000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17a00000 0 0x10000>, + <0 0x17a10000 0 0x10000>, + <0 0x17a20000 0 0x10000>, + <0 0x17a30000 0 0x10000>; + reg-names = "drv-0", + "drv-1", + "drv-2"; + + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&CLUSTER_PD>; + + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,sm8650-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8650-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + cpufreq_hw: cpufreq@17d91000 { + compatible = "qcom,sm8650-cpufreq-epss", "qcom,cpufreq-epss"; + reg = <0 0x17d91000 0 0x1000>, + <0 0x17d92000 0 0x1000>, + <0 0x17d93000 0 0x1000>, + <0 0x17d94000 0 0x1000>; + reg-names = "freq-domain0", + "freq-domain1", + "freq-domain2", + "freq-domain3"; + + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "dcvsh-irq-0", + "dcvsh-irq-1", + "dcvsh-irq-2", + "dcvsh-irq-3"; + + clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + #clock-cells = <1>; + }; + + pmu@24091000 { + compatible = "qcom,sm8650-llcc-bwmon", "qcom,sc7280-llcc-bwmon"; + reg = <0 0x24091000 0 0x1000>; + + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&llcc_bwmon_opp_table>; + + llcc_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <2086000>; + }; + + opp-1 { + opp-peak-kBps = <2929000>; + }; + + opp-2 { + opp-peak-kBps = <5931000>; + }; + + opp-3 { + opp-peak-kBps = <6515000>; + }; + + opp-4 { + opp-peak-kBps = <7980000>; + }; + + opp-5 { + opp-peak-kBps = <10437000>; + }; + + opp-6 { + opp-peak-kBps = <12157000>; + }; + + opp-7 { + opp-peak-kBps = <14060000>; + }; + + opp-8 { + opp-peak-kBps = <16113000>; + }; + }; + }; + + pmu@240b7400 { + compatible = "qcom,sm8650-cpu-bwmon", "qcom,sdm845-bwmon"; + reg = <0 0x240b7400 0 0x600>; + + interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>; + + operating-points-v2 = <&cpu_bwmon_opp_table>; + + cpu_bwmon_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-0 { + opp-peak-kBps = <4577000>; + }; + + opp-1 { + opp-peak-kBps = <7110000>; + }; + + opp-2 { + opp-peak-kBps = <9155000>; + }; + + opp-3 { + opp-peak-kBps = <12298000>; + }; + + opp-4 { + opp-peak-kBps = <14236000>; + }; + + opp-5 { + opp-peak-kBps = <16265000>; + }; + }; + }; + + gem_noc: interconnect@24100000 { + compatible = "qcom,sm8650-gem-noc"; + reg = <0 0x24100000 0 0xc5080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system-cache-controller@25000000 { + compatible = "qcom,sm8650-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc_broadcast_base"; + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + + remoteproc_adsp: remoteproc@30000000 { + compatible = "qcom,sm8650-adsp-pas"; + reg = <0 0x30000000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "adsp"; + + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1043 0x20>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1044 0x20>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1045 0x20>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1046 0x20>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1007 0x40>, + <&apps_smmu 0x1067 0x0>, + <&apps_smmu 0x1087 0x0>; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,sm8650-nsp-noc"; + reg = <0 0x320c0000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + remoteproc_cdsp: remoteproc@32300000 { + compatible = "qcom,sm8650-cdsp-pas"; + reg = <0 0x32300000 0 0x1400000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_NSP>; + power-domain-names = "cx", + "mxc", + "nsp"; + + memory-region = <&cdsp_mem>, <&q6_cdsp_dtb_mem>, <&global_sync_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <5>; + + label = "cdsp"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "cdsp"; + + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + + iommus = <&apps_smmu 0x1961 0x0>, + <&apps_smmu 0x0c01 0x20>, + <&apps_smmu 0x19c1 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + + iommus = <&apps_smmu 0x1962 0x0>, + <&apps_smmu 0x0c02 0x20>, + <&apps_smmu 0x19c2 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1963 0x0>, + <&apps_smmu 0x0c03 0x20>, + <&apps_smmu 0x19c3 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1964 0x0>, + <&apps_smmu 0x0c04 0x20>, + <&apps_smmu 0x19c4 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1965 0x0>, + <&apps_smmu 0x0c05 0x20>, + <&apps_smmu 0x19c5 0x0>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1966 0x0>, + <&apps_smmu 0x0c06 0x20>, + <&apps_smmu 0x19c6 0x0>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1967 0x0>, + <&apps_smmu 0x0c07 0x20>, + <&apps_smmu 0x19c7 0x0>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + + iommus = <&apps_smmu 0x1968 0x0>, + <&apps_smmu 0x0c08 0x20>, + <&apps_smmu 0x19c8 0x0>; + }; + }; + }; + }; + }; + + thermal-zones { + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpuss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpuss3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu2-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu2-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu3-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens0 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-middle-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1-critical { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + nsphvx0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphvx1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphvx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + nsphmx3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nsphmx3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens1 13>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 14>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + camera1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens1 15>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aoss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 0>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 1>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 2>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss2-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 3>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss3-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 4>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss4-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 5>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss4-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss5-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 6>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss5-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss6-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 7>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss6-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + gpuss7-thermal { + polling-delay-passive = <10>; + polling-delay = <0>; + thermal-sensors = <&tsens2 8>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss7-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 9>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem0-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 10>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem1-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 11>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem2-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + modem3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens2 12>; + + trips { + trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + modem3-critical { + temperature = <110000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts new file mode 100644 index 000000000000..7532d8eca2de --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. X1E80100 CRD"; + compatible = "qcom,x1e80100-crd", "qcom,x1e80100"; + + aliases { + serial0 = &uart21; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; + + vreg_edp_3p3: regulator-edp-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&edp_reg_en>; + pinctrl-names = "default"; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ + + edp_reg_en: edp-reg-en-state { + pins = "gpio70"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts new file mode 100644 index 000000000000..a37ad9475c90 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "x1e80100.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. X1E80100 QCP"; + compatible = "qcom,x1e80100-qcp", "qcom,x1e80100"; + + aliases { + serial0 = &uart21; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + + regulator-always-on; + regulator-boot-on; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vph_pwr>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vph_pwr>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&qupv3_2 { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <33 3>, /* Unused */ + <44 4>, /* SPI (TPM) */ + <238 1>; /* UFS Reset */ +}; + +&uart21 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi new file mode 100644 index 000000000000..6f75fc342ceb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -0,0 +1,3527 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,x1e80100-gcc.h> +#include <dt-bindings/dma/qcom-gpi.h> +#include <dt-bindings/interconnect/qcom,icc.h> +#include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom,rpmhpd.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,rpmh-rsc.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + clock-frequency = <76800000>; + #clock-cells = <0>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + + bi_tcxo_div2: bi-tcxo-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-mult = <1>; + clock-div = <2>; + }; + + bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK_A>; + clock-mult = <1>; + clock-div = <2>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD0>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD1>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x200>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD2>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x300>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + power-domains = <&CPU_PD3>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU4: cpu@10000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10000>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD4>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU5: cpu@10100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10100>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD5>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU6: cpu@10200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10200>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD6>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU7: cpu@10300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x10300>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + power-domains = <&CPU_PD7>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU8: cpu@20000 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20000>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD8>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + + L2_2: l2-cache { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + CPU9: cpu@20100 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20100>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD9>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU10: cpu@20200 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20200>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD10>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + CPU11: cpu@20300 { + device_type = "cpu"; + compatible = "qcom,oryon"; + reg = <0x0 0x20300>; + enable-method = "psci"; + next-level-cache = <&L2_2>; + power-domains = <&CPU_PD11>; + power-domain-names = "psci"; + cpu-idle-states = <&CLUSTER_C4>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + cluster2 { + core0 { + cpu = <&CPU8>; + }; + + core1 { + cpu = <&CPU9>; + }; + + core2 { + cpu = <&CPU10>; + }; + + core3 { + cpu = <&CPU11>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + CLUSTER_C4: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "ret"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <180>; + exit-latency-us = <320>; + min-residency-us = <1000>; + }; + }; + + domain-idle-states { + CLUSTER_CL4: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "l2-ret"; + arm,psci-suspend-param = <0x01000044>; + entry-latency-us = <350>; + exit-latency-us = <500>; + min-residency-us = <2500>; + }; + + CLUSTER_CL5: cluster-sleep-1 { + compatible = "arm,idle-state"; + idle-state-name = "ret-pll-off"; + arm,psci-suspend-param = <0x01000054>; + entry-latency-us = <2200>; + exit-latency-us = <2500>; + min-residency-us = <7000>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-x1e80100", "qcom,scm"; + interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + }; + }; + + clk_virt: interconnect-0 { + compatible = "qcom,x1e80100-clk-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mc_virt: interconnect-1 { + compatible = "qcom,x1e80100-mc-virt"; + #interconnect-cells = <2>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0 0x80000000 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + + CPU_PD0: power-domain-cpu0 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD1: power-domain-cpu1 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD2: power-domain-cpu2 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD3: power-domain-cpu3 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD0>; + }; + + CPU_PD4: power-domain-cpu4 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD5: power-domain-cpu5 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD6: power-domain-cpu6 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD7: power-domain-cpu7 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD1>; + }; + + CPU_PD8: power-domain-cpu8 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CPU_PD9: power-domain-cpu9 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CPU_PD10: power-domain-cpu10 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CPU_PD11: power-domain-cpu11 { + #power-domain-cells = <0>; + power-domains = <&CLUSTER_PD2>; + }; + + CLUSTER_PD0: power-domain-cpu-cluster0 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + }; + + CLUSTER_PD1: power-domain-cpu-cluster1 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + }; + + CLUSTER_PD2: power-domain-cpu-cluster2 { + #power-domain-cells = <0>; + domain-idle-states = <&CLUSTER_CL4>, <&CLUSTER_CL5>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gunyah_hyp_mem: gunyah-hyp@80000000 { + reg = <0x0 0x80000000 0x0 0x800000>; + no-map; + }; + + hyp_elf_package_mem: hyp-elf-package@80800000 { + reg = <0x0 0x80800000 0x0 0x200000>; + no-map; + }; + + ncc_mem: ncc@80a00000 { + reg = <0x0 0x80a00000 0x0 0x400000>; + no-map; + }; + + cpucp_log_mem: cpucp-log@80e00000 { + reg = <0x0 0x80e00000 0x0 0x40000>; + no-map; + }; + + cpucp_mem: cpucp@80e40000 { + reg = <0x0 0x80e40000 0x0 0x540000>; + no-map; + }; + + reserved-region@81380000 { + reg = <0x0 0x81380000 0x0 0x80000>; + no-map; + }; + + tags_mem: tags-region@81400000 { + reg = <0x0 0x81400000 0x0 0x1a0000>; + no-map; + }; + + xbl_dtlog_mem: xbl-dtlog@81a00000 { + reg = <0x0 0x81a00000 0x0 0x40000>; + no-map; + }; + + xbl_ramdump_mem: xbl-ramdump@81a40000 { + reg = <0x0 0x81a40000 0x0 0x1c0000>; + no-map; + }; + + aop_image_mem: aop-image@81c00000 { + reg = <0x0 0x81c00000 0x0 0x60000>; + no-map; + }; + + aop_cmd_db_mem: aop-cmd-db@81c60000 { + compatible = "qcom,cmd-db"; + reg = <0x0 0x81c60000 0x0 0x20000>; + no-map; + }; + + aop_config_mem: aop-config@81c80000 { + reg = <0x0 0x81c80000 0x0 0x20000>; + no-map; + }; + + tme_crash_dump_mem: tme-crash-dump@81ca0000 { + reg = <0x0 0x81ca0000 0x0 0x40000>; + no-map; + }; + + tme_log_mem: tme-log@81ce0000 { + reg = <0x0 0x81ce0000 0x0 0x4000>; + no-map; + }; + + uefi_log_mem: uefi-log@81ce4000 { + reg = <0x0 0x81ce4000 0x0 0x10000>; + no-map; + }; + + secdata_apss_mem: secdata-apss@81cff000 { + reg = <0x0 0x81cff000 0x0 0x1000>; + no-map; + }; + + pdp_ns_shared_mem: pdp-ns-shared@81e00000 { + reg = <0x0 0x81e00000 0x0 0x100000>; + no-map; + }; + + gpu_prr_mem: gpu-prr@81f00000 { + reg = <0x0 0x81f00000 0x0 0x10000>; + no-map; + }; + + tpm_control_mem: tpm-control@81f10000 { + reg = <0x0 0x81f10000 0x0 0x10000>; + no-map; + }; + + usb_ucsi_shared_mem: usb-ucsi-shared@81f20000 { + reg = <0x0 0x81f20000 0x0 0x10000>; + no-map; + }; + + pld_pep_mem: pld-pep@81f30000 { + reg = <0x0 0x81f30000 0x0 0x6000>; + no-map; + }; + + pld_gmu_mem: pld-gmu@81f36000 { + reg = <0x0 0x81f36000 0x0 0x1000>; + no-map; + }; + + pld_pdp_mem: pld-pdp@81f37000 { + reg = <0x0 0x81f37000 0x0 0x1000>; + no-map; + }; + + tz_stat_mem: tz-stat@82700000 { + reg = <0x0 0x82700000 0x0 0x100000>; + no-map; + }; + + xbl_tmp_buffer_mem: xbl-tmp-buffer@82800000 { + reg = <0x0 0x82800000 0x0 0xc00000>; + no-map; + }; + + adsp_rpc_remote_heap_mem: adsp-rpc-remote-heap@84b00000 { + reg = <0x0 0x84b00000 0x0 0x800000>; + no-map; + }; + + spu_secure_shared_memory_mem: spu-secure-shared-memory@85300000 { + reg = <0x0 0x85300000 0x0 0x80000>; + no-map; + }; + + adsp_boot_dtb_mem: adsp-boot-dtb@866c0000 { + reg = <0x0 0x866c0000 0x0 0x40000>; + no-map; + }; + + spss_region_mem: spss-region@86700000 { + reg = <0x0 0x86700000 0x0 0x400000>; + no-map; + }; + + adsp_boot_mem: adsp-boot@86b00000 { + reg = <0x0 0x86b00000 0x0 0xc00000>; + no-map; + }; + + video_mem: video@87700000 { + reg = <0x0 0x87700000 0x0 0x700000>; + no-map; + }; + + adspslpi_mem: adspslpi@87e00000 { + reg = <0x0 0x87e00000 0x0 0x3a00000>; + no-map; + }; + + q6_adsp_dtb_mem: q6-adsp-dtb@8b800000 { + reg = <0x0 0x8b800000 0x0 0x80000>; + no-map; + }; + + cdsp_mem: cdsp@8b900000 { + reg = <0x0 0x8b900000 0x0 0x2000000>; + no-map; + }; + + q6_cdsp_dtb_mem: q6-cdsp-dtb@8d900000 { + reg = <0x0 0x8d900000 0x0 0x80000>; + no-map; + }; + + gpu_microcode_mem: gpu-microcode@8d9fe000 { + reg = <0x0 0x8d9fe000 0x0 0x2000>; + no-map; + }; + + cvp_mem: cvp@8da00000 { + reg = <0x0 0x8da00000 0x0 0x700000>; + no-map; + }; + + camera_mem: camera@8e100000 { + reg = <0x0 0x8e100000 0x0 0x800000>; + no-map; + }; + + av1_encoder_mem: av1-encoder@8e900000 { + reg = <0x0 0x8e900000 0x0 0x700000>; + no-map; + }; + + reserved-region@8f000000 { + reg = <0x0 0x8f000000 0x0 0xa00000>; + no-map; + }; + + wpss_mem: wpss@8fa00000 { + reg = <0x0 0x8fa00000 0x0 0x1900000>; + no-map; + }; + + q6_wpss_dtb_mem: q6-wpss-dtb@91300000 { + reg = <0x0 0x91300000 0x0 0x80000>; + no-map; + }; + + xbl_sc_mem: xbl-sc@d8000000 { + reg = <0x0 0xd8000000 0x0 0x40000>; + no-map; + }; + + reserved-region@d8040000 { + reg = <0x0 0xd8040000 0x0 0xa0000>; + no-map; + }; + + qtee_mem: qtee@d80e0000 { + reg = <0x0 0xd80e0000 0x0 0x520000>; + no-map; + }; + + ta_mem: ta@d8600000 { + reg = <0x0 0xd8600000 0x0 0x8a00000>; + no-map; + }; + + tags_mem1: tags@e1000000 { + reg = <0x0 0xe1000000 0x0 0x26a0000>; + no-map; + }; + + llcc_lpi_mem: llcc-lpi@ff800000 { + reg = <0x0 0xff800000 0x0 0x600000>; + no-map; + }; + + smem_mem: smem@ffe00000 { + compatible = "qcom,smem"; + reg = <0x0 0xffe00000 0x0 0x200000>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <2>; + dma-ranges = <0 0 0 0 0x10 0>; + ranges = <0 0 0 0 0x10 0>; + + gcc: clock-controller@100000 { + compatible = "qcom,x1e80100-gcc"; + reg = <0 0x00100000 0 0x200000>; + + clocks = <&bi_tcxo_div2>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + + power-domains = <&rpmhpd RPMHPD_CX>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + gpi_dma2: dma-controller@800000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00800000 0 0x60000>; + + interrupts = <GIC_SPI 788 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 789 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 790 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 791 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 792 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 793 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 794 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 795 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 796 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 797 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 798 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x436 0x0>; + + status = "disabled"; + }; + + qupv3_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x008c0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x423 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c16: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>, + <&gpi_dma2 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c16_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi16: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + + interrupts = <GIC_SPI 808 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>, + <&gpi_dma2 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi16_data_clk>, <&qup_spi16_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c17: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>, + <&gpi_dma2 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c17_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi17: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + + interrupts = <GIC_SPI 809 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>, + <&gpi_dma2 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi17_data_clk>, <&qup_spi17_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c18: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>, + <&gpi_dma2 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c18_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi18: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + + interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>, + <&gpi_dma2 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi18_data_clk>, <&qup_spi18_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c19: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>, + <&gpi_dma2 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c19_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi19: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + + interrupts = <GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>, + <&gpi_dma2 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi19_data_clk>, <&qup_spi19_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c20: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>, + <&gpi_dma2 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c20_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi20: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + + interrupts = <GIC_SPI 812 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>, + <&gpi_dma2 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi20_data_clk>, <&qup_spi20_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c21: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>, + <&gpi_dma2 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c21_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi21: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>, + <&gpi_dma2 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi21_data_clk>, <&qup_spi21_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + uart21: serial@894000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00894000 0 0x4000>; + + interrupts = <GIC_SPI 813 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config"; + + pinctrl-0 = <&qup_uart21_default>; + pinctrl-names = "default"; + + status = "disabled"; + }; + + i2c22: i2c@898000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>, + <&gpi_dma2 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c22_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi22: spi@898000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00898000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>, + <&gpi_dma2 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi22_data_clk>, <&qup_spi22_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c23: i2c@89c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>, + <&gpi_dma2 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c23_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi23: spi@89c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0089c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_2 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>, + <&gpi_dma2 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi23_data_clk>, <&qup_spi23_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma1: dma-controller@a00000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00a00000 0 0x60000>; + + interrupts = <GIC_SPI 776 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 777 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 778 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 779 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 780 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 781 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 786 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 787 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x136 0x0>; + + status = "disabled"; + }; + + qupv3_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x123 0x0>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>, + <&gpi_dma1 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c8_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + + interrupts = <GIC_SPI 800 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>, + <&gpi_dma1 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>, + <&gpi_dma1 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c9_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + + interrupts = <GIC_SPI 801 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>, + <&gpi_dma1 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>, + <&gpi_dma1 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c10_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + + interrupts = <GIC_SPI 802 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>, + <&gpi_dma1 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>, + <&gpi_dma1 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c11_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + + interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>, + <&gpi_dma1 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>, + <&gpi_dma1 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c12_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + + interrupts = <GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>, + <&gpi_dma1 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>, + <&gpi_dma1 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c13_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + + interrupts = <GIC_SPI 805 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>, + <&gpi_dma1 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>, + <&gpi_dma1 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c14_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + + interrupts = <GIC_SPI 806 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>, + <&gpi_dma1 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>, + <&gpi_dma1 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c15_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + + interrupts = <GIC_SPI 807 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>, + <&aggre1_noc MASTER_QUP_1 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>, + <&gpi_dma1 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + gpi_dma0: dma-controller@b00000 { + compatible = "qcom,x1e80100-gpi-dma", "qcom,sm6350-gpi-dma"; + reg = <0 0x00b00000 0 0x60000>; + + interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>; + + dma-channels = <12>; + dma-channel-mask = <0x3e>; + #dma-cells = <3>; + + iommus = <&apps_smmu 0x456 0x0>; + + status = "disabled"; + }; + + qupv3_0: geniqup@bc0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00bc0000 0 0x2000>; + + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", + "s-ahb"; + + iommus = <&apps_smmu 0x443 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + status = "disabled"; + + i2c0: i2c@b80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xb80000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>, + <&gpi_dma0 1 0 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c0_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi0: spi@b80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b80000 0 0x4000>; + + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>, + <&gpi_dma0 1 0 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c1: i2c@b84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b84000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>, + <&gpi_dma0 1 1 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c1_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi1: spi@b84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b84000 0 0x4000>; + + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>, + <&gpi_dma0 1 1 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c2: i2c@b88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b88000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>, + <&gpi_dma0 1 2 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c2_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi2: spi@b88000 { + compatible = "qcom,geni-spi"; + reg = <0 0xb88000 0 0x4000>; + + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>, + <&gpi_dma0 1 2 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c3: i2c@b8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b8c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>, + <&gpi_dma0 1 3 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c3_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi3: spi@b8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b8c000 0 0x4000>; + + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>, + <&gpi_dma0 1 3 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c4: i2c@b90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0xb90000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>, + <&gpi_dma0 1 4 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c4_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi4: spi@b90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b90000 0 0x4000>; + + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>, + <&gpi_dma0 1 4 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c5: i2c@b94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b94000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>, + <&gpi_dma0 1 5 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c5_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi5: spi@b94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b94000 0 0x4000>; + + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>, + <&gpi_dma0 1 5 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c6: i2c@b98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b98000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>, + <&gpi_dma0 1 6 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c6_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi6: spi@b98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b98000 0 0x4000>; + + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>, + <&gpi_dma0 1 6 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c7: i2c@b9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00b9c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>, + <&gpi_dma0 1 7 QCOM_GPI_I2C>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_i2c7_data_clk>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi7: spi@b9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00b9c000 0 0x4000>; + + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + + interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS + &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS + &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>, + <&aggre2_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "qup-core", + "qup-config", + "qup-memory"; + + dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>, + <&gpi_dma0 1 7 QCOM_GPI_SPI>; + dma-names = "tx", + "rx"; + + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + }; + + cnoc_main: interconnect@1500000 { + compatible = "qcom,x1e80100-cnoc-main"; + reg = <0 0x1500000 0 0x14400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + config_noc: interconnect@1600000 { + compatible = "qcom,x1e80100-cnoc-cfg"; + reg = <0 0x1600000 0 0x6600>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + system_noc: interconnect@1680000 { + compatible = "qcom,x1e80100-system-noc"; + reg = <0 0x1680000 0 0x1c080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_south_anoc: interconnect@16c0000 { + compatible = "qcom,x1e80100-pcie-south-anoc"; + reg = <0 0x16c0000 0 0xd080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_center_anoc: interconnect@16d0000 { + compatible = "qcom,x1e80100-pcie-center-anoc"; + reg = <0 0x16d0000 0 0x7000>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre1_noc: interconnect@16e0000 { + compatible = "qcom,x1e80100-aggre1-noc"; + reg = <0 0x16E0000 0 0x14400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + aggre2_noc: interconnect@1700000 { + compatible = "qcom,x1e80100-aggre2-noc"; + reg = <0 0x1700000 0 0x1c400>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pcie_north_anoc: interconnect@1740000 { + compatible = "qcom,x1e80100-pcie-north-anoc"; + reg = <0 0x1740000 0 0x9080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_center_anoc: interconnect@1750000 { + compatible = "qcom,x1e80100-usb-center-anoc"; + reg = <0 0x1750000 0 0x8800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_north_anoc: interconnect@1760000 { + compatible = "qcom,x1e80100-usb-north-anoc"; + reg = <0 0x1760000 0 0x7080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + usb_south_anoc: interconnect@1770000 { + compatible = "qcom,x1e80100-usb-south-anoc"; + reg = <0 0x1770000 0 0xf080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + mmss_noc: interconnect@1780000 { + compatible = "qcom,x1e80100-mmss-noc"; + reg = <0 0x1780000 0 0x5B800>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0 0x01f40000 0 0x20000>; + #hwlock-cells = <1>; + }; + + gem_noc: interconnect@26400000 { + compatible = "qcom,x1e80100-gem-noc"; + reg = <0 0x26400000 0 0x311200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + nsp_noc: interconnect@320c0000 { + compatible = "qcom,x1e80100-nsp-noc"; + reg = <0 0x320C0000 0 0xE080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_ag_noc: interconnect@7e40000 { + compatible = "qcom,x1e80100-lpass-ag-noc"; + reg = <0 0x7e40000 0 0xE080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_lpiaon_noc: interconnect@7400000 { + compatible = "qcom,x1e80100-lpass-lpiaon-noc"; + reg = <0 0x7400000 0 0x19080>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + lpass_lpicx_noc: interconnect@7430000 { + compatible = "qcom,x1e80100-lpass-lpicx-noc"; + reg = <0 0x7430000 0 0x3A200>; + + qcom,bcm-voters = <&apps_bcm_voter>; + + #interconnect-cells = <2>; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,x1e80100-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>; + + qcom,pdc-ranges = <0 480 42>, <42 251 5>, + <47 522 52>, <99 609 32>, + <131 717 12>, <143 816 19>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,x1e80100-tlmm"; + reg = <0 0x0f100000 0 0xf00000>; + + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + gpio-ranges = <&tlmm 0 0 239>; + wakeup-parent = <&pdc>; + + qup_i2c0_data_clk: qup-i2c0-data-clk-state { + /* SDA, SCL */ + pins = "gpio0", "gpio1"; + function = "qup0_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk-state { + /* SDA, SCL */ + pins = "gpio4", "gpio5"; + function = "qup0_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk-state { + /* SDA, SCL */ + pins = "gpio8", "gpio9"; + function = "qup0_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk-state { + /* SDA, SCL */ + pins = "gpio12", "gpio13"; + function = "qup0_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk-state { + /* SDA, SCL */ + pins = "gpio16", "gpio17"; + function = "qup0_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk-state { + /* SDA, SCL */ + pins = "gpio20", "gpio21"; + function = "qup0_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk-state { + /* SDA, SCL */ + pins = "gpio24", "gpio25"; + function = "qup0_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk-state { + /* SDA, SCL */ + pins = "gpio14", "gpio15"; + function = "qup0_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk-state { + /* SDA, SCL */ + pins = "gpio32", "gpio33"; + function = "qup1_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk-state { + /* SDA, SCL */ + pins = "gpio36", "gpio37"; + function = "qup1_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk-state { + /* SDA, SCL */ + pins = "gpio40", "gpio41"; + function = "qup1_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk-state { + /* SDA, SCL */ + pins = "gpio44", "gpio45"; + function = "qup1_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c12_data_clk: qup-i2c12-data-clk-state { + /* SDA, SCL */ + pins = "gpio48", "gpio49"; + function = "qup1_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk-state { + /* SDA, SCL */ + pins = "gpio52", "gpio53"; + function = "qup1_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk-state { + /* SDA, SCL */ + pins = "gpio56", "gpio57"; + function = "qup1_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk-state { + /* SDA, SCL */ + pins = "gpio54", "gpio55"; + function = "qup1_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c16_data_clk: qup-i2c16-data-clk-state { + /* SDA, SCL */ + pins = "gpio64", "gpio65"; + function = "qup2_se0"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c17_data_clk: qup-i2c17-data-clk-state { + /* SDA, SCL */ + pins = "gpio68", "gpio69"; + function = "qup2_se1"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c18_data_clk: qup-i2c18-data-clk-state { + /* SDA, SCL */ + pins = "gpio72", "gpio73"; + function = "qup2_se2"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c19_data_clk: qup-i2c19-data-clk-state { + /* SDA, SCL */ + pins = "gpio76", "gpio77"; + function = "qup2_se3"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c20_data_clk: qup-i2c20-data-clk-state { + /* SDA, SCL */ + pins = "gpio80", "gpio81"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c21_data_clk: qup-i2c21-data-clk-state { + /* SDA, SCL */ + pins = "gpio84", "gpio85"; + function = "qup2_se5"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c22_data_clk: qup-i2c22-data-clk-state { + /* SDA, SCL */ + pins = "gpio88", "gpio89"; + function = "qup2_se6"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_i2c23_data_clk: qup-i2c23-data-clk-state { + /* SDA, SCL */ + pins = "gpio86", "gpio87"; + function = "qup2_se7"; + drive-strength = <2>; + bias-pull-up = <2200>; + }; + + qup_spi0_cs: qup-spi0-cs-state { + pins = "gpio3"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi0_data_clk: qup-spi0-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio0", "gpio1", "gpio2"; + function = "qup0_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_cs: qup-spi1-cs-state { + pins = "gpio7"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi1_data_clk: qup-spi1-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio4", "gpio5", "gpio6"; + function = "qup0_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_cs: qup-spi2-cs-state { + pins = "gpio11"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi2_data_clk: qup-spi2-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio8", "gpio9", "gpio10"; + function = "qup0_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_cs: qup-spi3-cs-state { + pins = "gpio15"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi3_data_clk: qup-spi3-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio12", "gpio13", "gpio14"; + function = "qup0_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_cs: qup-spi4-cs-state { + pins = "gpio19"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi4_data_clk: qup-spi4-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio16", "gpio17", "gpio18"; + function = "qup0_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_cs: qup-spi5-cs-state { + pins = "gpio23"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi5_data_clk: qup-spi5-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio20", "gpio21", "gpio22"; + function = "qup0_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_cs: qup-spi6-cs-state { + pins = "gpio27"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi6_data_clk: qup-spi6-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio24", "gpio25", "gpio26"; + function = "qup0_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_cs: qup-spi7-cs-state { + pins = "gpio13"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi7_data_clk: qup-spi7-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio14", "gpio15", "gpio12"; + function = "qup0_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_cs: qup-spi8-cs-state { + pins = "gpio35"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi8_data_clk: qup-spi8-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio32", "gpio33", "gpio34"; + function = "qup1_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_cs: qup-spi9-cs-state { + pins = "gpio39"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi9_data_clk: qup-spi9-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio36", "gpio37", "gpio38"; + function = "qup1_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_cs: qup-spi10-cs-state { + pins = "gpio43"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi10_data_clk: qup-spi10-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio40", "gpio41", "gpio42"; + function = "qup1_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_cs: qup-spi11-cs-state { + pins = "gpio47"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi11_data_clk: qup-spi11-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio44", "gpio45", "gpio46"; + function = "qup1_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_cs: qup-spi12-cs-state { + pins = "gpio51"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi12_data_clk: qup-spi12-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio48", "gpio49", "gpio50"; + function = "qup1_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_cs: qup-spi13-cs-state { + pins = "gpio55"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi13_data_clk: qup-spi13-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio52", "gpio53", "gpio54"; + function = "qup1_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_cs: qup-spi14-cs-state { + pins = "gpio59"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi14_data_clk: qup-spi14-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio56", "gpio57", "gpio58"; + function = "qup1_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_cs: qup-spi15-cs-state { + pins = "gpio53"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi15_data_clk: qup-spi15-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio54", "gpio55", "gpio52"; + function = "qup1_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_cs: qup-spi16-cs-state { + pins = "gpio67"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi16_data_clk: qup-spi16-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio64", "gpio65", "gpio66"; + function = "qup2_se0"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_cs: qup-spi17-cs-state { + pins = "gpio71"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi17_data_clk: qup-spi17-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio68", "gpio69", "gpio70"; + function = "qup2_se1"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_cs: qup-spi18-cs-state { + pins = "gpio75"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi18_data_clk: qup-spi18-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio72", "gpio73", "gpio74"; + function = "qup2_se2"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_cs: qup-spi19-cs-state { + pins = "gpio79"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi19_data_clk: qup-spi19-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio76", "gpio77", "gpio78"; + function = "qup2_se3"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_cs: qup-spi20-cs-state { + pins = "gpio83"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi20_data_clk: qup-spi20-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio80", "gpio81", "gpio82"; + function = "qup2_se4"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_cs: qup-spi21-cs-state { + pins = "gpio87"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi21_data_clk: qup-spi21-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio84", "gpio85", "gpio86"; + function = "qup2_se5"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_cs: qup-spi22-cs-state { + pins = "gpio91"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi22_data_clk: qup-spi22-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio88", "gpio89", "gpio90"; + function = "qup2_se6"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_cs: qup-spi23-cs-state { + pins = "gpio85"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_spi23_data_clk: qup-spi23-data-clk-state { + /* MISO, MOSI, CLK */ + pins = "gpio86", "gpio87", "gpio84"; + function = "qup2_se7"; + drive-strength = <6>; + bias-disable; + }; + + qup_uart21_default: qup-uart21-default-state { + /* TX, RX */ + pins = "gpio86", "gpio87"; + function = "qup2_se5"; + drive-strength= <2>; + bias-disable; + }; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,x1e80100-smmu-500", "qcom,smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>; + + #iommu-cells = <2>; + #global-interrupts = <1>; + }; + + intc: interrupt-controller@17000000 { + compatible = "arm,gic-v3"; + reg = <0 0x17000000 0 0x10000>, /* GICD */ + <0 0x17080000 0 0x480000>; /* GICR * 12 */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <3>; + interrupt-controller; + + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x40000>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic_its: msi-controller@17040000 { + compatible = "arm,gic-v3-its"; + reg = <0 0x17040000 0 0x40000>; + + msi-controller; + #msi-cells = <1>; + + status = "disabled"; + }; + }; + + apps_rsc: rsc@17500000 { + compatible = "qcom,rpmh-rsc"; + reg = <0 0x17500000 0 0x10000>, + <0 0x17510000 0 0x10000>, + <0 0x17520000 0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + qcom,drv-count = <3>; + + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 3>, <SLEEP_TCS 2>, + <WAKE_TCS 2>, <CONTROL_TCS 0>; + + label = "apps_rsc"; + + apps_bcm_voter: bcm-voter { + compatible = "qcom,bcm-voter"; + }; + + rpmhcc: clock-controller { + compatible = "qcom,x1e80100-rpmh-clk"; + + clocks = <&xo_board>; + clock-names = "xo"; + + #clock-cells = <1>; + }; + + rpmhpd: power-controller { + compatible = "qcom,x1e80100-rpmhpd"; + + operating-points-v2 = <&rpmhpd_opp_table>; + + #power-domain-cells = <1>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp-16 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp-48 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs_d2: opp-52 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>; + }; + + rpmhpd_opp_low_svs_d1: opp-56 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>; + }; + + rpmhpd_opp_low_svs_d0: opp-60 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>; + }; + + rpmhpd_opp_low_svs: opp-64 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_low_svs_l1: opp-80 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>; + }; + + rpmhpd_opp_svs: opp-128 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l0: opp-144 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + rpmhpd_opp_svs_l1: opp-192 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp-256 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp-320 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp-336 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp-384 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp-416 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; + + timer@17800000 { + compatible = "arm,armv7-timer-mem"; + reg = <0 0x17800000 0 0x1000>; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0 0x20000000>; + + frame@17801000 { + reg = <0 0x17801000 0x1000>, + <0 0x17802000 0x1000>; + + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <0>; + }; + + frame@17803000 { + reg = <0 0x17803000 0x1000>; + + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <1>; + + status = "disabled"; + }; + + frame@17805000 { + reg = <0 0x17805000 0x1000>; + + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <2>; + + status = "disabled"; + }; + + frame@17807000 { + reg = <0 0x17807000 0x1000>; + + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <3>; + + status = "disabled"; + }; + + frame@17809000 { + reg = <0 0x17809000 0x1000>; + + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <4>; + + status = "disabled"; + }; + + frame@1780b000 { + reg = <0 0x1780b000 0x1000>; + + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <5>; + + status = "disabled"; + }; + + frame@1780d000 { + reg = <0 0x1780d000 0x1000>; + + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + + frame-number = <6>; + + status = "disabled"; + }; + }; + + system-cache-controller@25000000 { + compatible = "qcom,x1e80100-llcc"; + reg = <0 0x25000000 0 0x200000>, + <0 0x25200000 0 0x200000>, + <0 0x25400000 0 0x200000>, + <0 0x25600000 0 0x200000>, + <0 0x25800000 0 0x200000>, + <0 0x25a00000 0 0x200000>, + <0 0x25c00000 0 0x200000>, + <0 0x25e00000 0 0x200000>, + <0 0x26000000 0 0x200000>; + reg-names = "llcc0_base", + "llcc1_base", + "llcc2_base", + "llcc3_base", + "llcc4_base", + "llcc5_base", + "llcc6_base", + "llcc7_base", + "llcc_broadcast_base"; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi index ef3bb835d5c0..6f133f54ded5 100644 --- a/arch/arm64/boot/dts/renesas/draak.dtsi +++ b/arch/arm64/boot/dts/renesas/draak.dtsi @@ -356,12 +356,9 @@ * CVBS and HDMI inputs through SW[49-53] * switches. * - * CVBS is the default selection, link it to - * VIN4 here. + * HDMI is the default selection, leave CVBS + * not connected here. */ - adv7180_out: endpoint { - remote-endpoint = <&vin4_in>; - }; }; }; @@ -374,6 +371,12 @@ interrupt-parent = <&gpio1>; interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; @@ -423,13 +426,11 @@ * CVBS and HDMI inputs through SW[49-53] * switches. * - * CVBS is the default selection, leave HDMI - * not connected here. + * HDMI is the default selection, link it to + * VIN4 here. */ adv7612_out: endpoint { - pclk-sample = <0>; - hsync-active = <0>; - vsync-active = <0>; + remote-endpoint = <&vin4_in>; }; }; }; @@ -580,8 +581,8 @@ function = "usb0"; }; - vin4_pins_cvbs: vin4 { - groups = "vin4_data8", "vin4_sync", "vin4_clk"; + vin4_pins: vin4 { + groups = "vin4_data24", "vin4_sync", "vin4_clk"; function = "vin4"; }; }; @@ -729,7 +730,7 @@ }; &vin4 { - pinctrl-0 = <&vin4_pins_cvbs>; + pinctrl-0 = <&vin4_pins>; pinctrl-names = "default"; status = "okay"; @@ -737,7 +738,10 @@ ports { port { vin4_in: endpoint { - remote-endpoint = <&adv7180_out>; + pclk-sample = <0>; + hsync-active = <0>; + vsync-active = <0>; + remote-endpoint = <&adv7612_out>; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/ebisu.dtsi b/arch/arm64/boot/dts/renesas/ebisu.dtsi index f1a5778ef115..cba2fde9dd36 100644 --- a/arch/arm64/boot/dts/renesas/ebisu.dtsi +++ b/arch/arm64/boot/dts/renesas/ebisu.dtsi @@ -403,6 +403,12 @@ interrupt-parent = <&gpio1>; interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <®_1p8v>; + dvdd-supply = <®_1p8v>; + pvdd-supply = <®_1p8v>; + dvdd-3v-supply = <®_3p3v>; + bgvdd-supply = <®_1p8v>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 405404c0843d..0608dce92e40 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -29,6 +29,15 @@ stdout-path = "serial0:115200n8"; }; + d1p8: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + d3p3: regulator-fixed { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; @@ -166,6 +175,12 @@ interrupt-parent = <&gpio1>; interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&d1p8>; + dvdd-supply = <&d1p8>; + pvdd-supply = <&d1p8>; + dvdd-3v-supply = <&d3p3>; + bgvdd-supply = <&d1p8>; + adi,input-depth = <8>; adi,input-colorspace = "rgb"; adi,input-clock = "1x"; diff --git a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi index bb4a5270f71b..913f70fe6c5c 100644 --- a/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a779g0-white-hawk-cpu.dtsi @@ -187,6 +187,9 @@ }; &hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi index 6c7b29b69d0e..5facfad96158 100644 --- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi @@ -96,6 +96,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + interrupt-parent = <&irqc>; gpio-ranges = <&pinctrl 0 0 152>; clocks = <&cpg CPG_MOD R9A08G045_GPIO_HCLK>; power-domains = <&cpg>; @@ -104,6 +105,73 @@ <&cpg R9A08G045_GPIO_SPARE_RESETN>; }; + irqc: interrupt-controller@11050000 { + compatible = "renesas,r9a08g045-irqc", "renesas,rzg2l-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x11050000 0 0x10000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 454 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "nmi", + "irq0", "irq1", "irq2", "irq3", + "irq4", "irq5", "irq6", "irq7", + "tint0", "tint1", "tint2", "tint3", + "tint4", "tint5", "tint6", "tint7", + "tint8", "tint9", "tint10", "tint11", + "tint12", "tint13", "tint14", "tint15", + "tint16", "tint17", "tint18", "tint19", + "tint20", "tint21", "tint22", "tint23", + "tint24", "tint25", "tint26", "tint27", + "tint28", "tint29", "tint30", "tint31", + "bus-err"; + clocks = <&cpg CPG_MOD R9A08G045_IA55_CLK>, + <&cpg CPG_MOD R9A08G045_IA55_PCLK>; + clock-names = "clk", "pclk"; + power-domains = <&cpg>; + resets = <&cpg R9A08G045_IA55_RESETN>; + }; + sdhi0: mmc@11c00000 { compatible = "renesas,sdhi-r9a08g045", "renesas,rcar-gen3-sdhi"; reg = <0x0 0x11c00000 0 0x10000>; @@ -149,6 +217,44 @@ status = "disabled"; }; + eth0: ethernet@11c30000 { + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; + reg = <0 0x11c30000 0 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A08G045_ETH0_CLK_AXI>, + <&cpg CPG_MOD R9A08G045_ETH0_CLK_CHI>, + <&cpg CPG_MOD R9A08G045_ETH0_REFCLK>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A08G045_ETH0_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + eth1: ethernet@11c40000 { + compatible = "renesas,r9a08g045-gbeth", "renesas,rzg2l-gbeth"; + reg = <0 0x11c40000 0 0x10000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mux", "fil", "arp_ns"; + phy-mode = "rgmii"; + clocks = <&cpg CPG_MOD R9A08G045_ETH1_CLK_AXI>, + <&cpg CPG_MOD R9A08G045_ETH1_CLK_CHI>, + <&cpg CPG_MOD R9A08G045_ETH1_REFCLK>; + clock-names = "axi", "chi", "refclk"; + resets = <&cpg R9A08G045_ETH1_RST_HW_N>; + power-domains = <&cpg>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@12400000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi index 33f2ecf42441..50ed66d42a24 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi @@ -163,7 +163,7 @@ }; avb: ethernet@a3300000 { - compatible = "renesas,etheravb-r9a09g011","renesas,etheravb-rzv2m"; + compatible = "renesas,etheravb-r9a09g011", "renesas,etheravb-rzv2m"; reg = <0 0xa3300000 0 0x800>; interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, /* ch0: Rx0 BE */ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, /* ch1: Rx1 NC */ diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi index 547859c388ce..4409c47239b9 100644 --- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi @@ -312,6 +312,7 @@ m25p,fast-read; spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi index 56ff92453976..5e4209d6fb42 100644 --- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi @@ -241,6 +241,7 @@ m25p,fast-read; spi-max-frequency = <50000000>; spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; partitions { compatible = "fixed-partitions"; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi index a199de8f8b02..f062d4ad78b7 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc-som.dtsi @@ -9,18 +9,36 @@ #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> /* - * Signals of SW_CONFIG switches: - * @SW_SD0_DEV_SEL: - * 0 - SD0 is connected to eMMC - * 1 - SD0 is connected to uSD0 card + * On-board switches' states: + * @SW_OFF: switch's state is OFF + * @SW_ON: switch's state is ON */ -#define SW_SD0_DEV_SEL 1 +#define SW_OFF 0 +#define SW_ON 1 + +/* + * SW_CONFIG[x] switches' states: + * @SW_CONFIG2: + * SW_OFF - SD0 is connected to eMMC + * SW_ON - SD0 is connected to uSD0 card + * @SW_CONFIG3: + * SW_OFF - SD2 is connected to SoC + * SW_ON - SCIF1, SSI0, IRQ0, IRQ1 connected to SoC + */ +#define SW_CONFIG2 SW_ON +#define SW_CONFIG3 SW_ON / { compatible = "renesas,rzg3s-smarcm", "renesas,r9a08g045s33", "renesas,r9a08g045"; aliases { mmc0 = &sdhi0; +#if SW_CONFIG3 == SW_OFF + mmc2 = &sdhi2; +#else + eth0 = ð0; + eth1 = ð1; +#endif }; chosen { @@ -43,7 +61,7 @@ enable-active-high; }; -#if SW_SD0_DEV_SEL +#if SW_CONFIG2 == SW_ON vccq_sdhi0: regulator1 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -63,13 +81,76 @@ regulator-always-on; }; #endif + + vcc_sdhi2: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(8, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +#if SW_CONFIG3 == SW_ON +ð0 { + pinctrl-0 = <ð0_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@7 { + reg = <7>; + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(12, 0) IRQ_TYPE_EDGE_FALLING>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; +}; + +ð1 { + pinctrl-0 = <ð1_pins>; + pinctrl-names = "default"; + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy1: ethernet-phy@7 { + reg = <7>; + interrupt-parent = <&pinctrl>; + interrupts = <RZG2L_GPIO(12, 1) IRQ_TYPE_EDGE_FALLING>; + rxc-skew-psec = <0>; + txc-skew-psec = <0>; + rxdv-skew-psec = <0>; + txen-skew-psec = <0>; + rxd0-skew-psec = <0>; + rxd1-skew-psec = <0>; + rxd2-skew-psec = <0>; + rxd3-skew-psec = <0>; + txd0-skew-psec = <0>; + txd1-skew-psec = <0>; + txd2-skew-psec = <0>; + txd3-skew-psec = <0>; + }; }; +#endif &extal_clk { clock-frequency = <24000000>; }; -#if SW_SD0_DEV_SEL +#if SW_CONFIG2 == SW_ON /* SD0 slot */ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; @@ -100,7 +181,100 @@ }; #endif +#if SW_CONFIG3 == SW_OFF +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_sdhi2>; + bus-width = <4>; + max-frequency = <50000000>; + status = "okay"; +}; +#endif + &pinctrl { + eth0-phy-irq-hog { + gpio-hog; + gpios = <RZG2L_GPIO(12, 0) GPIO_ACTIVE_LOW>; + input; + line-name = "eth0-phy-irq"; + }; + + eth0_pins: eth0 { + txc { + pinmux = <RZG2L_PORT_PINMUX(1, 0, 1)>; /* ET0_TXC */ + power-source = <1800>; + output-enable; + input-enable; + drive-strength-microamp = <5200>; + }; + + tx_ctl { + pinmux = <RZG2L_PORT_PINMUX(1, 1, 1)>; /* ET0_TX_CTL */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(1, 2, 1)>, /* ET0_TXD0 */ + <RZG2L_PORT_PINMUX(1, 3, 1)>, /* ET0_TXD1 */ + <RZG2L_PORT_PINMUX(1, 4, 1)>, /* ET0_TXD2 */ + <RZG2L_PORT_PINMUX(2, 0, 1)>, /* ET0_TXD3 */ + <RZG2L_PORT_PINMUX(3, 0, 1)>, /* ET0_RXC */ + <RZG2L_PORT_PINMUX(3, 1, 1)>, /* ET0_RX_CTL */ + <RZG2L_PORT_PINMUX(3, 2, 1)>, /* ET0_RXD0 */ + <RZG2L_PORT_PINMUX(3, 3, 1)>, /* ET0_RXD1 */ + <RZG2L_PORT_PINMUX(4, 0, 1)>, /* ET0_RXD2 */ + <RZG2L_PORT_PINMUX(4, 1, 1)>, /* ET0_RXD3 */ + <RZG2L_PORT_PINMUX(4, 3, 1)>, /* ET0_MDC */ + <RZG2L_PORT_PINMUX(4, 4, 1)>, /* ET0_MDIO */ + <RZG2L_PORT_PINMUX(4, 5, 1)>; /* ET0_LINKSTA */ + power-source = <1800>; + }; + }; + + eth1-phy-irq-hog { + gpio-hog; + gpios = <RZG2L_GPIO(12, 1) GPIO_ACTIVE_LOW>; + input; + line-name = "eth1-phy-irq"; + }; + + eth1_pins: eth1 { + txc { + pinmux = <RZG2L_PORT_PINMUX(7, 0, 1)>; /* ET1_TXC */ + power-source = <1800>; + output-enable; + input-enable; + drive-strength-microamp = <5200>; + }; + + tx_ctl { + pinmux = <RZG2L_PORT_PINMUX(7, 1, 1)>; /* ET1_TX_CTL */ + power-source = <1800>; + output-enable; + drive-strength-microamp = <5200>; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(7, 2, 1)>, /* ET1_TXD0 */ + <RZG2L_PORT_PINMUX(7, 3, 1)>, /* ET1_TXD1 */ + <RZG2L_PORT_PINMUX(7, 4, 1)>, /* ET1_TXD2 */ + <RZG2L_PORT_PINMUX(8, 0, 1)>, /* ET1_TXD3 */ + <RZG2L_PORT_PINMUX(8, 4, 1)>, /* ET1_RXC */ + <RZG2L_PORT_PINMUX(9, 0, 1)>, /* ET1_RX_CTL */ + <RZG2L_PORT_PINMUX(9, 1, 1)>, /* ET1_RXD0 */ + <RZG2L_PORT_PINMUX(9, 2, 1)>, /* ET1_RXD1 */ + <RZG2L_PORT_PINMUX(9, 3, 1)>, /* ET1_RXD2 */ + <RZG2L_PORT_PINMUX(10, 0, 1)>, /* ET1_RXD3 */ + <RZG2L_PORT_PINMUX(10, 2, 1)>, /* ET1_MDC */ + <RZG2L_PORT_PINMUX(10, 3, 1)>, /* ET1_MDIO */ + <RZG2L_PORT_PINMUX(10, 4, 1)>; /* ET1_LINKSTA */ + power-source = <1800>; + }; + }; + sdhi0_pins: sd0 { data { pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3"; @@ -139,4 +313,26 @@ "SD0_CLK", "SD0_CMD", "SD0_RST#"; power-source = <1800>; }; + + sdhi2_pins: sd2 { + data { + pins = "P11_2", "P11_3", "P12_0", "P12_1"; + input-enable; + }; + + ctrl { + pins = "P11_1"; + input-enable; + }; + + mux { + pinmux = <RZG2L_PORT_PINMUX(11, 0, 8)>, /* SD2_CLK */ + <RZG2L_PORT_PINMUX(11, 1, 8)>, /* SD2_CMD */ + <RZG2L_PORT_PINMUX(11, 2, 8)>, /* SD2_DATA0 */ + <RZG2L_PORT_PINMUX(11, 3, 8)>, /* SD2_DATA1 */ + <RZG2L_PORT_PINMUX(12, 0, 8)>, /* SD2_DATA2 */ + <RZG2L_PORT_PINMUX(12, 1, 8)>, /* SD2_DATA3 */ + <RZG2L_PORT_PINMUX(14, 1, 7)>; /* SD2_CD# */ + }; + }; }; diff --git a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi index e7073a09ed2e..214520137230 100644 --- a/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi +++ b/arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi @@ -11,6 +11,26 @@ / { aliases { serial0 = &scif0; + mmc1 = &sdhi1; + }; + + vcc_sdhi1: regulator-vcc-sdhi1 { + compatible = "regulator-fixed"; + regulator-name = "SDHI1 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(2, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi1: regulator-vccq-sdhi1 { + compatible = "regulator-gpio"; + regulator-name = "SDHI1 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + gpios = <&pinctrl RZG2L_GPIO(4, 2) GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; }; }; @@ -19,6 +39,38 @@ pinmux = <RZG2L_PORT_PINMUX(6, 3, 1)>, /* RXD */ <RZG2L_PORT_PINMUX(6, 4, 1)>; /* TXD */ }; + + sdhi1_pins: sd1 { + data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + + cd { + pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ + }; + }; + + sdhi1_pins_uhs: sd1-uhs { + data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <1800>; + }; + + ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <1800>; + }; + + cd { + pinmux = <RZG2L_PORT_PINMUX(0, 2, 1)>; /* SD1_CD */ + }; + }; }; &scif0 { @@ -26,3 +78,16 @@ pinctrl-0 = <&scif0_pins>; status = "okay"; }; + +&sdhi1 { + pinctrl-0 = <&sdhi1_pins>; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <&vcc_sdhi1>; + vqmmc-supply = <&vccq_sdhi1>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + max-frequency = <125000000>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index a18f33bf0c0e..a7b30e11beaf 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb @@ -78,6 +79,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-x55.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb @@ -98,14 +101,17 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-coolpi-cm5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-jaguar.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-nanopc-t6.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-turing-rk1.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-coolpi-4b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi index 3429e124d95a..5b4e22385165 100644 --- a/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30-engicam-common.dtsi @@ -7,6 +7,7 @@ / { aliases { + ethernet0 = &gmac; mmc1 = &sdmmc; mmc2 = &sdio; }; diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index c1bbd555f5f5..0a90a88fc664 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -14,6 +14,7 @@ compatible = "rockchip,px30-evb", "rockchip,px30"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts index 7d4c5324c61b..16798eb77077 100644 --- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -13,6 +13,7 @@ compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; aliases { + ethernet0 = &gmac; mmc2 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 42ce78beb413..d0905515399b 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -20,7 +20,6 @@ #size-cells = <2>; aliases { - ethernet0 = &gmac; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts index e9810d2f0407..b47fe02c33fb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts @@ -143,6 +143,68 @@ status = "okay"; }; +&gpio0 { + gpio-line-names = + /* GPIO0_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_B0 - B7 */ + "", "", "", "header1-pin3 [GPIO0_B3]", + "header1-pin5 [GPIO0_B4]", "", "", + "header1-pin11 [GPIO0_B7]", + /* GPIO0_C0 - C7 */ + "header1-pin13 [GPIO0_C0]", + "header1-pin15 [GPIO0_C1]", "", "", "", + "", "", "", + /* GPIO0_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_C0 - C7 */ + "", "", "", "", "", "", "header1-pin21 [GPIO1_C6]", + "header1-pin19 [GPIO1_C7]", + /* GPIO1_D0 - D7 */ + "header1-pin23 [GPIO1_D0]", "header1-pin24 [GPIO1_D1]", + "", "", "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2_A0 - A7 */ + "header1-pin10 [GPIO2_A0]", "header1-pin8 [GPIO2_A1]", + "", "", + "header1-pin7 [GPIO2_A4]", "header1-pin12 [GPIO2_A5]", + "header2-pin46 [GPIO2_A6]", "header1-pin22 [GPIO1_A7]", + /* GPIO2_B0 - B7 */ + "header2-pin45 [GPIO2_B0]", "header1-pin18 [GPIO2_B1]", + "header1-pin16 [GPIO2_B2]", "header2-pin44 [GPIO2_B3]", + "header2-pin43 [GPIO2_B4]", "header2-pin28 [GPIO2_B5]", + "header2-pin30 [GPIO2_B6]", "header2-pin32 [GPIO2_B7]", + /* GPIO2_C0 - C7 */ + "header2-pin34 [GPIO2_C0]", "", "", "", "", "", "", "", + /* GPIO2_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_B0 - B7 */ + "", "", "header2-pin42 [GPIO3_B2]", + "header2-pin41 [GPIO3_B3]", "header2-pin40 [GPIO3_B4]", + "header2-pin39 [GPIO3_B5]", "", "", + /* GPIO3_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + &i2c1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index 2ae4bb7d5e62..cfc0a87b5195 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -20,6 +20,11 @@ #size-cells = <2>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts index 1deef53a4c94..c7b1862fca6a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -9,6 +9,7 @@ compatible = "zkmagic,a95x-z2", "rockchip,rk3318"; aliases { + ethernet0 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts index ce318e05f0a6..f4d20f29c1b4 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts @@ -6,30 +6,16 @@ */ /dts-v1/; -#include "rk3326-odroid-go.dtsi" +#include "rk3326-anbernic-rg351m.dtsi" / { model = "Anbernic RG351M"; compatible = "anbernic,rg351m", "rockchip,rk3326"; - - vibrator { - compatible = "pwm-vibrator"; - pwms = <&pwm0 0 1000000 0>; - pwm-names = "enable"; - }; }; -/delete-node/ &builtin_gamepad; -/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */ - &internal_display { compatible = "elida,kd35t133"; iovcc-supply = <&vcc_lcd>; + rotation = <270>; vdd-supply = <&vcc_lcd>; }; - -&pwm0 { - status = "okay"; -}; - -/delete-node/ &rk817_charger; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi new file mode 100644 index 000000000000..b6d041dbed94 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dtsi @@ -0,0 +1,478 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + /* + * LED is a tri-state. Driven high it is red, driven low it is + * green, and not driven at all (pin set to input) it is amber. + * Additionally, there is a 2nd LED that is not controllable + * that is on (red) when plugged in to power. + */ + gpio_led: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin>; + + red_green_led: led-0 { + color = <LED_COLOR_ID_RED>; + gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + }; + + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_int"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm0 0 1000000 0>; + pwm-names = "enable"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + internal_display: panel@0 { + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <16>; + i2c-scl-rising-time-ns = <280>; + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + #clock-cells = <1>; + clock-names = "mclk"; + clock-output-names = "rk808-clkout1", "xin32k"; + clocks = <&cru SCLK_I2S1_OUT>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + pinctrl-names = "default"; + #sound-dai-cells = <0>; + wakeup-source; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + vcc8-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1150000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_logic"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1350000>; + regulator-min-microvolt = <950000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <1000000>; + regulator-name = "vdd_1v0"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-name = "vccio_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-boot-on; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_sd"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_bl"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <2800000>; + regulator-name = "vcc_lcd"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_wifi: LDO_REG9 { + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + usb_midu: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-max-microvolt = <5400000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb_midu"; + }; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; +}; + +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + card-detect-delay = <200>; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + #address-cells = <1>; + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "disabled"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&pinctrl { + headphone { + hp_det: hp-det { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + led_pin: led-pin { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dc_det: dc-det { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts new file mode 100644 index 000000000000..c79f7a7b38cb --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351v.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; +#include "rk3326-anbernic-rg351m.dtsi" + +/ { + model = "Anbernic RG351V"; + compatible = "anbernic,rg351v", "rockchip,rk3326"; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + + button-vol-down { + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-vol-up { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +&internal_display { + compatible = "anbernic,rg351v-panel", "newvision,nv3051d"; + vdd-supply = <&vcc_lcd>; +}; + +&io_domains { + vccio1-supply = <&vccio_sd>; +}; + +&vcc_sd { + regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <1800000>; +}; + +&vccio_sd { + regulator-max-microvolt = <1800000>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts index 40bf808642b9..824183e515da 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts @@ -9,6 +9,7 @@ compatible = "azw,beelink-a1", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts index ff6b466e0e07..1eef5504445f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -11,6 +11,7 @@ compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &sdio; mmc2 = &emmc; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts index 1445b879ac7a..a4399da7d8b1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts @@ -14,6 +14,7 @@ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; ethernet1 = &rtl8153; mmc0 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts index 5d7d567283e5..4237f2ee8fee 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts @@ -26,9 +26,11 @@ compatible = "ethernet-phy-ieee802.3-c22"; reg = <0>; + motorcomm,auto-sleep-disabled; motorcomm,clk-out-frequency-hz = <125000000>; motorcomm,keep-pll-enabled; - motorcomm,auto-sleep-disabled; + motorcomm,rx-clk-drv-microamp = <5020>; + motorcomm,rx-data-drv-microamp = <5020>; pinctrl-0 = <ð_phy_reset_pin>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts index dc83d74045a3..f20662929c77 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts @@ -15,6 +15,7 @@ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; ethernet1 = &rtl8153; mmc0 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index 5d5d9574088c..414897a57e75 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -11,6 +11,7 @@ compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts index 018a3a5075c7..3cda6c627b68 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts @@ -21,6 +21,8 @@ compatible = "radxa,rockpi-e", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; + ethernet1 = &gmac2phy; mmc0 = &sdmmc; mmc1 = &emmc; }; @@ -180,6 +182,59 @@ status = "okay"; }; +&gpio0 { + gpio-line-names = + /* GPIO0_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO0_D0 - D7 */ + "", "", "", "pin-15 [GPIO0_D3]", "", "", "", ""; +}; + +&gpio1 { + gpio-line-names = + /* GPIO1_A0 - A7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_B0 - B7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO1_D0 - D7 */ + "", "", "", "", "pin-07 [GPIO1_D4]", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + /* GPIO2_A0 - A7 */ + "pin-08 [GPIO2_A0]", "pin-10 [GPIO2_A1]", "pin-11 [GPIO2_A2]", + "pin-13 [GPIO2-A3]", "pin-27 [GPIO2_A4]", "pin-28 [GPIO2_A5]", + "pin-33 [GPIO2_A6]", "", + /* GPIO2_B0 - B7 */ + "", "", "", "", "pin-26 [GPIO2_B4]", "", "", "pin-36 [GPIO2_B7]", + /* GPIO2_C0 - C7 */ + "pin-32 [GPIO2_C0]", "pin-35 [GPIO2_C1]", "pin-12 [GPIO2_C2]", + "pin-38 [GPIO2_C3]", "pin-29 [GPIO2_C4]", "pin-31 [GPIO2_C5]", + "pin-37 [GPIO2_C6]", "pin-40 [GPIO2_C7]", + /* GPIO2_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + /* GPIO3_A0 - A7 */ + "pin-23 [GPIO3_A0]", "pin-19 [GPIO3_A1]", "pin-21 [GPIO3_A2]", + "", "pin-03 [GPIO3_A4]", "", "pin-05 [GPIO3_A6]", "", + /* GPIO3_B0 - B7 */ + "pin-24 [GPIO3_B0]", "", "", "", "", "", "", "", + /* GPIO3_C0 - C7 */ + "", "", "", "", "", "", "", "", + /* GPIO3_D0 - D7 */ + "", "", "", "", "", "", "", ""; +}; + &i2c1 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 0a27fa5271f5..229fe9da9c2d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -11,6 +11,7 @@ compatible = "pine64,rock64", "rockchip,rk3328"; aliases { + ethernet0 = &gmac2io; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index cc8209795c3e..fb5dcf6e9327 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -20,6 +20,10 @@ #size-cells = <2>; aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -27,8 +31,6 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; - ethernet0 = &gmac2io; - ethernet1 = &gmac2phy; }; cpus { @@ -916,6 +918,8 @@ resets = <&cru SRST_GMAC2IO_A>; reset-names = "stmmaceth"; rockchip,grf = <&grf>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; snps,txpbl = <0x4>; status = "disabled"; }; @@ -938,6 +942,8 @@ reset-names = "stmmaceth"; phy-mode = "rmii"; phy-handle = <&phy>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; snps,txpbl = <0x4>; clock_in_out = "output"; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi index e47d1398aeca..b48b98c13705 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi @@ -9,6 +9,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts index be06e6e64d18..029b8e22e709 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts @@ -12,6 +12,7 @@ compatible = "geekbuying,geekbox", "rockchip,rk3368"; aliases { + ethernet0 = &gmac; mmc0 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi index 5753e57fd716..8ac8acf4082d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi @@ -8,6 +8,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index 81d1064fdb21..dcee2e28916f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -12,6 +12,7 @@ compatible = "tronsmart,orion-r68-meta", "rockchip,rk3368"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 5589f3db6b36..b16b7ca02379 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -12,6 +12,7 @@ compatible = "rockchip,r88", "rockchip,rk3368"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &emmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a4c5aaf1f457..62af0cb94839 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -19,7 +19,10 @@ #size-cells = <2>; aliases { - ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts index 6464ef4d113d..173da81fc231 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts @@ -15,6 +15,7 @@ compatible = "openailab,eaidk-610", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts index 3d1e126b553f..55eca7a50a1f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-evb.dts @@ -12,6 +12,7 @@ compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdhci; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts index 1ce85a5816e4..30e4879f322c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts @@ -13,6 +13,10 @@ model = "96boards RK3399 Ficus"; compatible = "vamrs,ficus", "rockchip,rk3399"; + aliases { + ethernet0 = &gmac; + }; + chosen { stdout-path = "serial2:1500000n8"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index c5db64f3e124..260415d99aeb 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -16,6 +16,7 @@ compatible = "firefly,firefly-rk3399", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts index 7af27e8216f1..4a6ab6c2e24c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts @@ -11,6 +11,7 @@ compatible = "hugsun,x99", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts index 8302e51def52..99ac4ed0f13f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts @@ -10,6 +10,10 @@ / { model = "Khadas Edge-Captain"; compatible = "khadas,edge-captain", "rockchip,rk3399"; + + aliases { + ethernet0 = &gmac; + }; }; &gmac { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts index f5dcb99dc349..e12e7b4d64ca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts @@ -10,6 +10,10 @@ / { model = "Khadas Edge-V"; compatible = "khadas,edge-v", "rockchip,rk3399"; + + aliases { + ethernet0 = &gmac; + }; }; &gmac { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts index 1eb287a3f8c0..9e3aec4440bd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts @@ -19,6 +19,7 @@ compatible = "kobol,helios64", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; spi1 = &spi1; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts index a21ac319f809..cb69e2145fa9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -15,6 +15,7 @@ compatible = "leez,p710", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 7c5f441a2219..b7f1e47978a6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -18,6 +18,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index dba4d03bfc2b..e7551449e718 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -17,6 +17,7 @@ compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 115c14c0a3c6..18a98c4648ea 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "rk3399-puma.dtsi" +#include <dt-bindings/input/input.h> / { model = "Theobroma Systems RK3399-Q7 SoM"; @@ -18,6 +19,38 @@ stdout-path = "serial0:115200n8"; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&haikou_keys_pin>; + pinctrl-names = "default"; + + button-batlow-n { + gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + label = "BATLOW#"; + linux,code = <KEY_BATTERY>; + }; + + button-slp-btn-n { + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; + label = "SLP_BTN#"; + linux,code = <KEY_SLEEP>; + }; + + button-wake-n { + gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>; + label = "WAKE#"; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + + switch-lid-btn-n { + gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + label = "LID_BTN#"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + }; + }; + leds { pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; @@ -165,11 +198,8 @@ }; &pinctrl { - pinctrl-names = "default"; - pinctrl-0 = <&haikou_pin_hog>; - - hog { - haikou_pin_hog: haikou-pin-hog { + buttons { + haikou_keys_pin: haikou-keys-pin { rockchip,pins = /* LID_BTN */ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, @@ -177,7 +207,7 @@ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ + /* WAKE# */ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 20e3f41efe97..c08e69391c01 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -9,6 +9,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdhci; }; @@ -119,6 +120,20 @@ drive-impedance-ohm = <33>; }; +&gpio0 { + /* + * The BIOS_DISABLE hog is a feedback pin for the actual status of the + * signal. This usually represents the state of a switch on the baseboard. + * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed. + */ + bios-disable-hog { + gpios = <RK_PB0 GPIO_ACTIVE_HIGH>; + gpio-hog; + input; + line-name = "bios_disable"; + }; +}; + &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; assigned-clock-parents = <&clkin_gmac>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index c32913df93c3..ca7a446b6568 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -14,6 +14,7 @@ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index 8bfd5f88d1ef..7baf9d1b22fd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -15,6 +15,7 @@ compatible = "radxa,rock-4c-plus", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdhci; mmc1 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index f2279aa6ca9e..281a12180703 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -12,6 +12,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdhci; mmc1 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index bca2b50e0a93..f30b82a10ca3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -11,6 +11,7 @@ / { aliases { + ethernet0 = &gmac; mmc0 = &sdio0; mmc1 = &sdmmc; mmc2 = &sdhci; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index e6ac292ce645..b3ef1c85e754 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -12,6 +12,7 @@ compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399"; aliases { + ethernet0 = &gmac; mmc0 = &sdmmc; mmc1 = &sdhci; }; @@ -44,7 +45,7 @@ fan0: gpio-fan { #cooling-cells = <2>; compatible = "gpio-fan"; - gpio-fan,speed-map = <0 0 3000 1>; + gpio-fan,speed-map = <0 0>, <3000 1>; gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index da0dfb237f85..6e12c5a920ca 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -19,7 +19,11 @@ #size-cells = <2>; aliases { - ethernet0 = &gmac; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; i2c0 = &i2c0; i2c1 = &i2c1; i2c2 = &i2c2; @@ -2114,6 +2118,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; #cooling-cells = <2>; + dynamic-power-coefficient = <2640>; power-domains = <&power RK3399_PD_GPU>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 8b8992a8e9c0..8823c924dc1d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -13,6 +13,7 @@ compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; aliases { + ethernet0 = &gmac; mmc0 = &sdhci; mmc1 = &sdmmc; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts index 1c6d83b47cd2..6ecdf5d28339 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts @@ -455,7 +455,7 @@ &pinctrl { leds { sys_led_pin: sys-status-led-pin { - rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts index 1ead3c5c24b3..0ac64f043b80 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts @@ -5,67 +5,11 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pinctrl/rockchip.h> -#include "rk3566-anbernic-rg353x.dtsi" +#include "rk3566-powkiddy-rk2023.dtsi" / { model = "RGB30"; compatible = "powkiddy,rgb30", "rockchip,rk3566"; - - aliases { - mmc1 = &sdmmc0; - mmc2 = &sdmmc1; - mmc3 = &sdmmc2; - }; - - battery: battery { - compatible = "simple-battery"; - charge-full-design-microamp-hours = <3151000>; - charge-term-current-microamp = <300000>; - constant-charge-current-max-microamp = <2000000>; - constant-charge-voltage-max-microvolt = <4250000>; - factory-internal-resistance-micro-ohms = <117000>; - voltage-max-design-microvolt = <4172000>; - voltage-min-design-microvolt = <3400000>; - - ocv-capacity-celsius = <20>; - ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>, - <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>, - <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>, - <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>, - <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>, - <3400000 0>; - }; - - /* - * Channels reversed for speakers. Headphones automatically switch via hardware when - * detected with no ability to control output in software. Headphones appear to be mono - * (each output channel receives all audio). No microphone support on 3.5mm jack. - */ - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "rk817_ext"; - simple-audio-card,format = "i2s"; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Headphone", "Headphones"; - simple-audio-card,routing = - "Headphones", "HPOL", - "Headphones", "HPOR"; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - }; -}; - -/delete-node/ &adc_keys; - -&chosen { - /delete-property/ stdout-path; }; &cru { @@ -75,87 +19,21 @@ <200000000>, <292500000>; }; -&gpio_keys_control { - button-r1 { - gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; - label = "TR"; - linux,code = <BTN_TR>; - }; - - button-r2 { - gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; - label = "TR2"; - linux,code = <BTN_TR2>; - }; -}; - -/delete-node/ &{/i2c@fdd40000/regulator@40}; - -&i2c0 { - vdd_cpu: regulator@1c { - compatible = "tcs,tcs4525"; - reg = <0x1c>; - fcs,suspend-voltage-selector = <1>; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <712500>; - regulator-max-microvolt = <1390000>; - regulator-name = "vdd_cpu"; - regulator-ramp-delay = <2300>; - vin-supply = <&vcc_sys>; - regulator-state-mem { - regulator-off-in-suspend; +&dsi0 { + panel: panel@0 { + compatible = "powkiddy,rgb30-panel"; + reg = <0>; + backlight = <&backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc3v3_lcd0_n>; + iovcc-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; }; }; }; - -/* - * Device has 2 red LEDs instead of an amber and a red. Relabel LEDs as - * red_led0 and red_led1. - */ -/delete-node/ &{/pwm-leds/led-1}; -/delete-node/ &{/pwm-leds/led-2}; - -&leds { - red_led0: led-1 { - color = <LED_COLOR_ID_RED>; - function = LED_FUNCTION_CHARGING; - max-brightness = <255>; - pwms = <&pwm7 0 25000 0>; - }; - - red_led1: led-2 { - color = <LED_COLOR_ID_RED>; - default-state = "off"; - function = LED_FUNCTION_STATUS; - max-brightness = <255>; - pwms = <&pwm0 0 25000 0>; - }; -}; - -&panel { - compatible = "powkiddy,rgb30-panel"; - vcc-supply = <&vcc3v3_lcd0_n>; - iovcc-supply = <&vcc3v3_lcd0_n>; - /delete-property/ vdd-supply; -}; - -&pwm5 { - status = "disabled"; -}; - -&rk817 { - rk817_charger: charger { - monitored-battery = <&battery>; - rockchip,resistor-sense-micro-ohms = <10000>; - rockchip,sleep-enter-current-microamp = <300000>; - rockchip,sleep-filter-current-microamp = <100000>; - }; -}; - -/* There is no UART header visible on the board for this device. */ -&uart2 { - status = "disabled"; -}; - -/delete-node/ &vibrator; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts new file mode 100644 index 000000000000..ba32d0793dca --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-powkiddy-rk2023.dtsi" + +/ { + model = "RK2023"; + compatible = "powkiddy,rk2023", "rockchip,rk3566"; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <115200000>; +}; + +&dsi0 { + panel: panel@0 { + compatible = "powkiddy,rk2023-panel", "newvision,nv3051d"; + reg = <0>; + backlight = <&backlight>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc3v3_lcd0_n>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi new file mode 100644 index 000000000000..0fa8f06f94cd --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dtsi @@ -0,0 +1,875 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + aliases { + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; + + adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc_mux 0>, + <&adc_mux 1>, + <&adc_mux 2>, + <&adc_mux 3>; + pinctrl-0 = <&joy_mux_en>; + pinctrl-names = "default"; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@2 { + reg = <2>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <15 1023>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <32>; + abs-fuzz = <32>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + adc_mux: adc-mux { + compatible = "io-channel-mux"; + channels = "left_x", "right_x", "left_y", "right_y"; + #io-channel-cells = <1>; + io-channels = <&saradc 3>; + io-channel-names = "parent"; + mux-controls = <&gpio_mux>; + settle-time-us = <100>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3151000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4250000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>, + <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>, + <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>, + <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>, + <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>, + <3400000 0>; + }; + + gpio_keys_control: gpio-keys-control { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-l1 { + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-left { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-right { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-up { + gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-vol-down { + gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-vol-up { + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio_mux: mux-controller { + compatible = "gpio-mux"; + mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>, + <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>; + #mux-control-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c5>; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + /* + * Device also includes an always on LED that is wired to the 5V input + * voltage and is on when the device is plugged in. + */ + leds: pwm-leds { + compatible = "pwm-leds"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + pwms = <&pwm6 0 25000 0>; + }; + + red_led: led-1 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_CHARGING; + max-brightness = <255>; + pwms = <&pwm7 0 25000 0>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + }; + + /* + * Channels reversed for speakers. Headphones automatically switch via hardware when + * detected with no ability to control output in software. Headphones appear to be mono + * (each output channel receives all audio). No microphone support on 3.5mm jack. + */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Headphones"; + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-0 = <&vcc_lcd_h>; + pinctrl-names = "default"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_lcd0_n"; + vin-supply = <&vcc_3v3>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_sys: regulator-vcc-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-name = "vcc_sys"; + }; + + vcc_wifi: regulator-vcc-wifi { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_wifi_h>; + pinctrl-names = "default"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-0 = <&hdmitxm0_cec>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <4700000>; + regulator-max-microvolt = <5400000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + }; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + pinctrl-names = "default"; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + gpio-btns { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + btn_pins_vol: btn-pins-vol { + rockchip,pins = + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + joy-mux { + joy_mux_en: joy-mux-en { + rockchip,pins = + <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc3v3-lcd { + vcc_lcd_h: vcc-lcd-h { + rockchip,pins = + <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wifi { + vcc_wifi_h: vcc-wifi-h { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; +}; + +&pwm4 { + status = "okay"; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk &sdmmc1_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc1v8_dvp>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + vqmmc-supply = <&vcca1v8_pmu>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m1_xfer &uart1m1_ctsn &uart1m1_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&usb_host0_xhci { + dr_mode = "peripheral"; + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2phy1_host>, <&combphy1 PHY_TYPE_USB3>; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts new file mode 100644 index 000000000000..4786b19fd017 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-x55.dts @@ -0,0 +1,926 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Powkiddy x55"; + compatible = "powkiddy,x55", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; + mmc3 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc_joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 0>, <&saradc 1>, + <&saradc 2>, <&saradc 3>; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <15 1023>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <1023 15>; + linux,code = <ABS_Y>; + }; + + axis@2 { + reg = <2>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <15 1023>; + linux,code = <ABS_RX>; + }; + + axis@3 { + reg = <3>; + abs-flat = <30>; + abs-fuzz = <20>; + abs-range = <1023 15>; + linux,code = <ABS_RY>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <4000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4300000>; + factory-internal-resistance-micro-ohms = <91000>; + voltage-max-design-microvolt = <4138000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4138000 100>, <4083000 95>, <4059000 90>, <4044000 85>, + <4030000 80>, <4020000 75>, <4006000 70>, <3972000 65>, + <3934000 60>, <3904000 55>, <3878000 50>, <3857000 45>, + <3843000 40>, <3826000 35>, <3801000 30>, <3768000 25>, + <3735000 20>, <3688000 15>, <3621000 10>, <3553000 5>, + <3400000 0>; + }; + + gpio_keys_control: gpio-keys-control { + compatible = "gpio-keys"; + pinctrl-0 = <&btn_pins_ctrl>; + pinctrl-names = "default"; + + button-a { + gpios = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-b { + gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; + label = "SOUTH"; + linux,code = <BTN_SOUTH>; + }; + + button-down { + gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + + button-l1 { + gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; + label = "TL"; + linux,code = <BTN_TL>; + }; + + button-l2 { + gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; + label = "TL2"; + linux,code = <BTN_TL2>; + }; + + button-left { + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-right { + gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-select { + gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + + button-start { + gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; + + button-thumbl { + gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_LOW>; + label = "THUMBL"; + linux,code = <BTN_THUMBL>; + }; + + button-thumbr { + gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; + label = "THUMBR"; + linux,code = <BTN_THUMBR>; + }; + + button-r1 { + gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; + + button-up { + gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + + button-x { + gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; + label = "NORTH"; + linux,code = <BTN_NORTH>; + }; + + button-y { + gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; + }; + + gpio_keys_vol: gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-voldown { + gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-volup { + gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + red_led: led-0 { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_STATUS; + }; + + green_led: led-1 { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + }; + + amber_led: led-2 { + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_CHARGING; + }; + + }; + + hdmi-con { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c5>; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk817 1>; + clock-names = "ext_clock"; + pinctrl-0 = <&wifi_enable_h>; + pinctrl-names = "default"; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + pinctrl-0 = <&hp_det>; + pinctrl-names = "default"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; + + vcc5v0_host: regulator-vcc5v0-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc5v0_host_en>; + pinctrl-names = "default"; + regulator-name = "vcc5v0_host"; + vin-supply = <&dcdc_boost>; + }; + + vcc_lcd: regulator-vcc-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&vcc_lcd_en>; + pinctrl-names = "default"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_lcd"; + }; + + vcc_sys: regulator-vcc-sys { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-name = "vcc_sys"; + }; + + vcc_wifi: regulator-vcc-wifi { + compatible = "regulator-fixed"; + gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&vcc_wifi_h>; + pinctrl-names = "default"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&cru { + assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>, + <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <32768>, <1200000000>, + <200000000>, <126400000>; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&dsi_dphy0 { + status = "okay"; +}; + +&dsi0 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + dsi0_in: port@0 { + reg = <0>; + dsi0_in_vp1: endpoint { + remote-endpoint = <&vp1_out_dsi0>; + }; + }; + + dsi0_out: port@1 { + reg = <1>; + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel: panel@0 { + compatible = "powkiddy,x55-panel", "himax,hx8394"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rst>; + reset-gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>; + rotation = <270>; + vcc-supply = <&vcc_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + pinctrl-0 = <&hdmitxm0_cec>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clocks = <&cru I2S1_MCLKOUT_TX>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_sys>; + vcc9-supply = <&dcdc_boost>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca1v8_pmu: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_dvp: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8_dvp"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc2v8_dvp: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc2v8_dvp"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + dcdc_boost: BOOST { + regulator-min-microvolt = <4700000>; + regulator-max-microvolt = <5400000>; + regulator-name = "boost"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + otg_switch: OTG_SWITCH { + regulator-name = "otg_switch"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <150000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + + }; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1390000>; + regulator-name = "vdd_cpu"; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c5 { + pinctrl-0 = <&i2c5m1_xfer>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + pinctrl-0 = <&i2s1m0_sclktx>, <&i2s1m0_lrcktx>, <&i2s1m0_sdi0>, + <&i2s1m0_sdo0>; + pinctrl-names = "default"; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-control { + btn_pins_ctrl: btn-pins-ctrl { + rockchip,pins = + <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + btn_pins_vol: btn-pins-vol { + rockchip,pins = + <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gpio-lcd { + lcd_rst: lcd-rst { + rockchip,pins = + <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gpio-leds { + led_pins: led-pins { + rockchip,pins = + <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hp-detect { + hp_det: hp-det { + rockchip,pins = + <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = + <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vcc5v0_otg_en: vcc5v0-otg-en { + rockchip,pins = + <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vcc-lcd { + vcc_lcd_en: vcc-lcd-en { + rockchip,pins = + <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + vcc-wifi { + vcc_wifi_h: vcc-wifi-h { + rockchip,pins = + <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + status = "okay"; + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcca1v8_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcca1v8_pmu>; + vccio5-supply = <&vcc2v8_dvp>; + vccio6-supply = <&vcc1v8_dvp>; + vccio7-supply = <&vcc_3v3>; +}; + +&pwm4 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, + <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc0_bus4>, <&sdmmc0_clk>, <&sdmmc0_cmd>, + <&sdmmc0_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_cmd>, <&sdmmc1_clk>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + status = "okay"; +}; + +&sdmmc2 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + pinctrl-0 = <&sdmmc2m1_bus4>, <&sdmmc2m1_cmd>, <&sdmmc2m1_clk>, + <&sdmmc2m1_det>; + pinctrl-names = "default"; + sd-uhs-sdr104; + vqmmc-supply = <&vcc2v8_dvp>; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-0 = <&uart1m0_xfer>, <&uart1m0_ctsn>, <&uart1m0_rtsn>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt"; + device-wake-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_xhci { + phys = <&usb2phy0_otg>; + phy-names = "usb2-phy"; + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vp1 { + vp1_out_dsi0: endpoint@ROCKCHIP_VOP2_EP_MIPI0 { + reg = <ROCKCHIP_VOP2_EP_MIPI0>; + remote-endpoint = <&dsi0_in_vp1>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index 854d02b46e6f..59843a7a199c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -31,8 +31,9 @@ fan: gpio_fan { compatible = "gpio-fan"; gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 4500 1>; + gpio-fan,speed-map = + < 0 0>, + <4500 1>; pinctrl-names = "default"; pinctrl-0 = <&fan_en_h>; #cooling-cells = <2>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts index 1b1c67d5b1ef..3ae24e39450a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts @@ -14,6 +14,7 @@ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566"; aliases { + ethernet0 = &gmac1; mmc1 = &sdmmc0; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index 938092fce186..63eea27293fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -12,6 +12,7 @@ compatible = "firefly,rk3566-roc-pc", "rockchip,rk3566"; aliases { + ethernet0 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; mmc2 = &sdmmc1; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts index 4e49bebf548b..fdbf1c783242 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts @@ -13,6 +13,10 @@ model = "PINE64 RK3566 SOQuartz on Blade carrier board"; compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566"; + aliases { + ethernet0 = &gmac1; + }; + /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */ vcc3v0_sd: vcc3v0-sd-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts index cddf6cd2fecb..6ed3fa4aee34 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -8,6 +8,10 @@ model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; + aliases { + ethernet0 = &gmac1; + }; + /* labeled +12v in schematic */ vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts index 2208dbfb7f0a..f2095dfa4eaf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts @@ -8,6 +8,10 @@ model = "PINE64 RK3566 SOQuartz on Model A carrier board"; compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; + aliases { + ethernet0 = &gmac1; + }; + /* labeled DCIN_12V in schematic */ vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index 63bae36b8f7e..bfb7b952f4c5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -12,7 +12,6 @@ compatible = "pine64,soquartz", "rockchip,rk3566"; aliases { - ethernet0 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; mmc2 = &sdmmc1; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts new file mode 100644 index 000000000000..d4c70835e0fe --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts @@ -0,0 +1,214 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/leds/common.h> +#include "rk3588-coolpi-cm5.dtsi" + +/ { + model = "RK3588 CoolPi CM5 EVB"; + compatible = "coolpi,pi-cm5-evb", "coolpi,pi-cm5", "rockchip,rk3588"; + + backlight: backlight { + compatible = "pwm-backlight"; + enable-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + power-supply = <&vcc12v_dcin>; + pwms = <&pwm2 0 25000 0>; + }; + + leds: leds { + compatible = "gpio-leds"; + + green_led: led-0 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_lcd: vcc3v3-lcd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lcd"; + enable-active-high; + gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcdpwr_en>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_host_pwren>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + enable-active-high; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwren>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +/* M.2 E-Key */ +&pcie2x1l1 { + reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreq &pcie_wake &pcie_rst &wifi_pwron &bt_pwron>; + status = "okay"; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +/* M.2 M-Key ssd */ +&pcie3x4 { + reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&pinctrl { + lcd { + lcdpwr_en: lcdpwr-en { + rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bl_en: bl-en { + rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + usb_host_pwren: usb-host-pwren { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + usb_otg_pwren: usb-otg-pwren { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + bt_pwron: bt-pwron { + rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_clkreq: pcie-clkreq { + rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_rst: pcie-rst { + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + wifi_pwron: wifi-pwron { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pcie_wake: pcie-wake { + rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&u2phy3_host { + phy-supply = <&vcc5v0_usb30_host>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi new file mode 100644 index 000000000000..0b02f4d6e003 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5.dtsi @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588.dtsi" + +/ { + compatible = "coolpi,pi-cm5", "rockchip,rk3588"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdio; + mmc2 = &sdmmc; + serial2 = &uart2; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + avdd0v85_pcie20: avdd0v85-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v85_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + avdd1v8_pcie20: avdd1v8-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd1v8_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + avdd0v75_pcie30: avdd0v75-pcie30-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v75_pcie30"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + vin-supply = <&avdd_0v75_s0>; + }; + + pcie30_avdd1v8: avdd1v8-pcie30-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy1_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii-rxid"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + pinctrl-names = "default"; + rx_delay = <0x00>; + tx_delay = <0x43>; + status = "okay"; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@1 { + /* YT8531C/H */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&yt8531_rst>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>; + }; +}; + +/* ethernet */ +&pcie2x1l2 { + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&yt6801_isolate>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + yt6801 { + yt6801_isolate: yt6801-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + yt8531 { + yt8531_rst: yt8531-rst { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_2v0_pldo_s3>; + vcc14-supply = <&vcc_2v0_pldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_cpu_lit_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vddq_ddr_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "avcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "avdd_1v2_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "pldo6_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s3"; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_ddr_pll_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "vdd_0v75_s0"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts index b51543892078..be6a4f4f90f6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6a-io.dts @@ -12,10 +12,6 @@ compatible = "edgeble,neural-compute-module-6a-io", "edgeble,neural-compute-module-6a", "rockchip,rk3588"; - aliases { - serial2 = &uart2; - }; - chosen { stdout-path = "serial2:1500000n8"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts index 9933765e4097..070baeb63431 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-edgeble-neu6b-io.dts @@ -9,13 +9,9 @@ / { model = "Edgeble Neu6B IO Board"; - compatible = "edgeble,neural-compute-module-6b-io", + compatible = "edgeble,neural-compute-module-6a-io", "edgeble,neural-compute-module-6b", "rockchip,rk3588"; - aliases { - serial2 = &uart2; - }; - chosen { stdout-path = "serial2:1500000n8"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index b9d789d57862..ac7c677b0fb9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -16,8 +16,8 @@ compatible = "rockchip,rk3588-evb1-v10", "rockchip,rk3588"; aliases { + ethernet0 = &gmac0; mmc0 = &sdhci; - serial2 = &uart2; }; chosen { @@ -56,6 +56,63 @@ }; }; + analog-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + simple-audio-card,name = "RK3588 EVB1 Audio"; + simple-audio-card,aux-devs = <&_headphone>, <&_speaker>; + simple-audio-card,bitclock-master = <&masterdai>; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&masterdai>; + simple-audio-card,hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,pin-switches = "Headphones", "Speaker"; + simple-audio-card,routing = + "Speaker Amplifier INL", "LOUT2", + "Speaker Amplifier INR", "ROUT2", + "Speaker", "Speaker Amplifier OUTL", + "Speaker", "Speaker Amplifier OUTR", + "Headphones Amplifier INL", "LOUT1", + "Headphones Amplifier INR", "ROUT1", + "Headphones", "Headphones Amplifier OUTL", + "Headphones", "Headphones Amplifier OUTR", + "LINPUT1", "Onboard Microphone", + "RINPUT1", "Onboard Microphone", + "LINPUT2", "Microphone Jack", + "RINPUT2", "Microphone Jack"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Microphone", "Onboard Microphone", + "Headphone", "Headphones", + "Speaker", "Speaker"; + + simple-audio-card,cpu { + sound-dai = <&i2s0_8ch>; + }; + + masterdai: simple-audio-card,codec { + sound-dai = <&es8388>; + system-clock-frequency = <12288000>; + }; + }; + + amp_headphone: headphone-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&headphone_amplifier_en>; + sound-name-prefix = "Headphones Amplifier"; + }; + + amp_speaker: speaker-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&speaker_amplifier_en>; + sound-name-prefix = "Speaker Amplifier"; + }; + backlight: backlight { compatible = "pwm-backlight"; power-supply = <&vcc12v_dcin>; @@ -240,6 +297,32 @@ }; }; +&i2c7 { + status = "okay"; + + es8388: audio-codec@11 { + compatible = "everest,es8388"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + AVDD-supply = <&avcc_1v8_codec_s0>; + DVDD-supply = <&avcc_1v8_codec_s0>; + HPVDD-supply = <&vcc_3v3_s0>; + PVDD-supply = <&vcc_3v3_s0>; + #sound-dai-cells = <0>; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; +}; + &mdio0 { rgmii_phy: ethernet-phy@1 { /* RTL8211F */ @@ -273,6 +356,20 @@ }; &pinctrl { + audio { + hp_detect: headphone-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + headphone_amplifier_en: headphone-amplifier-en { + rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + speaker_amplifier_en: speaker-amplifier-en { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + rtl8111 { rtl8111_isolate: rtl8111-isolate { rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts new file mode 100644 index 000000000000..4ce70fb75a30 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588-jaguar.dts @@ -0,0 +1,803 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/usb/pd.h> +#include "rk3588.dtsi" + +/ { + model = "Theobroma Systems RK3588-SBC Jaguar"; + compatible = "tsd,rk3588-jaguar", "rockchip,rk3588"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + /* Can be controlled through SW2 but also GPIO1 on CP2102 on P20 */ + button-bios-disable { + label = "BIOS_DISABLE"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <0>; + }; + }; + + aliases { + ethernet0 = &gmac0; + mmc0 = &sdhci; + mmc1 = &sdmmc; + rtc0 = &rtc_twi; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + /* DCIN is 12-24V but standard is 12V */ + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led1_pin>; + status = "okay"; + + /* LED1 on PCB */ + led-1 { + gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_AMBER>; + }; + }; + + pps { + compatible = "pps-gpio"; + gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v2_s3: vcc-1v2-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v2_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Exposed on P14 and P15 */ + vcc_2v8_s3: vcc-2v8-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_2v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc_5v0_usb_a: vcc-5v0-usb-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "usb_a_vcc"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + gpio = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v0_usb_c1: vcc-5v0-usb-c1-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_usbc1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v0_usb_c2: vcc-5v0-usb-c2-regulator { + compatible = "regulator-fixed"; + regulator-name = "5v_usbc2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + gpio = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc3v3_mdot2: vcc3v3-mdot2-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_mdot2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1_ps { + status = "okay"; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_b3 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&gmac0 { + clock_in_out = "output"; + phy-handle = <&rgmii_phy>; + phy-mode = "rgmii"; + phy-supply = <&vcc_1v2_s3>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_rx_bus2 + &gmac0_tx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus + ð0_pins + ð_reset>; + tx_delay = <0x10>; + rx_delay = <0x10>; + snps,reset-gpio = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 100000>; + + status = "okay"; +}; + +&gpio1 { + mdot2e-w-disable1-n-hog { + gpios = <RK_PB1 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m.2 E-key W_DISABLE1#"; + gpio-hog; + }; +}; + +&gpio4 { + mdot2e-w-disable2-n-hog { + gpios = <RK_PC1 GPIO_ACTIVE_LOW>; + output-low; + line-name = "m.2 E-key W_DISABLE2#"; + gpio-hog; + }; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + }; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1m4_xfer>; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m4_xfer>; +}; + +&i2c7 { + status = "okay"; + + /* SE050 Secure Element at 0x48; GPIO1_A4 for enable pin */ + + /* Also on 0x55 */ + eeprom@54 { + compatible = "st,24c04", "atmel,24c04"; + reg = <0x54>; + pagesize = <16>; + vcc-supply = <&vcc_3v3_s3>; + }; +}; + +&i2c8 { + pinctrl-0 = <&i2c8m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&mdio0 { + rgmii_phy: ethernet-phy@6 { + /* KSZ9031 or KSZ9131 */ + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x6>; + clocks = <&cru REFCLKO25M_ETH0_OUT>; + }; +}; + +&pcie2x1l0 { + reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; /* WIFI_PERST0# */ + vpcie3v3-supply = <&vcc3v3_mdot2>; + status = "okay"; +}; + +&pinctrl { + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + ethernet { + eth_reset: eth-reset { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led1_pin: led1-pin { + rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + mmc-pwrseq = <&emmc_pwrseq>; + no-sdio; + no-sd; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_data_strobe>; + supports-cqe; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vcc_1v8_s3>; + status = "okay"; +}; + +&sdmmc { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_bus4 &sdmmc_cmd &sdmmc_clk>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + system-power-controller; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8_s0: pldo-reg1 { + regulator-name = "vcca_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda_1v2_s0: pldo-reg3 { + regulator-name = "vdda_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_3v3_s0: pldo-reg4 { + regulator-name = "vcca_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdda_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdda_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdda_0v75_s0: nldo-reg3 { + regulator-name = "vdda_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v85_s0: nldo-reg4 { + regulator-name = "vdda_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc_5v0_usb_a>; + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +/* Mule-ATtiny debug UART; typically baudrate 9600 */ +&uart0 { + pinctrl-0 = <&uart0m0_xfer>; + status = "okay"; +}; + +/* Main debug interface on P20 micro-USB B port and P21 header */ +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* RS485 on P19 */ +&uart3 { + pinctrl-0 = <&uart3m2_xfer &uart3_rtsn>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +/* Mule-ATtiny UPDI flashing UART */ +&uart7 { + pinctrl-0 = <&uart7m0_xfer>; + status = "okay"; +}; + +/* host0 on P10 USB-A */ +&usb_host0_ehci { + status = "okay"; +}; + +/* host0 on P10 USB-A */ +&usb_host0_ohci { + status = "okay"; +}; + +/* host1 on M.2 E-key */ +&usb_host1_ehci { + status = "okay"; +}; + +/* host1 on M.2 E-key */ +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts index 97af4f912828..d7722772ecd8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dts @@ -19,7 +19,6 @@ aliases { mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; chosen { @@ -537,13 +536,12 @@ }; &sdmmc { - max-frequency = <200000000>; - no-sdio; - no-mmc; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; disable-wp; + no-mmc; + no-sdio; sd-uhs-sdr104; vmmc-supply = <&vcc_3v3_s3>; vqmmc-supply = <&vccio_sd_s0>; @@ -570,6 +568,8 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + vcc1-supply = <&vcc4v0_sys>; vcc2-supply = <&vcc4v0_sys>; vcc3-supply = <&vcc4v0_sys>; @@ -590,7 +590,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts index 298c183d6f4f..3e660ff6cd5f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts @@ -19,7 +19,6 @@ aliases { mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts index 5c59f9571dce..87a0abf95f7d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts @@ -17,9 +17,9 @@ compatible = "pine64,quartzpro64", "rockchip,rk3588"; aliases { + ethernet0 = &gmac0; mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 741f631db345..a0e303c3a1dc 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -14,7 +14,6 @@ mmc0 = &sdhci; mmc1 = &sdmmc; mmc2 = &sdio; - serial2 = &uart2; }; chosen { @@ -138,6 +137,10 @@ status = "okay"; }; +&combphy2_psu { + status = "okay"; +}; + &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; @@ -423,6 +426,8 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; + system-power-controller; + vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; vcc3-supply = <&vcc5v0_sys>; @@ -443,7 +448,7 @@ #gpio-cells = <2>; rk806_dvs1_null: dvs1-null-pins { - pins = "gpio_pwrctrl2"; + pins = "gpio_pwrctrl1"; function = "pin_fun0"; }; @@ -765,3 +770,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi index d88c0e852356..dc08da518a76 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi @@ -19,8 +19,6 @@ aliases { ethernet0 = &gmac1; mmc0 = &sdhci; - serial2 = &uart2; - serial9 = &uart9; }; fan: pwm-fan { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts new file mode 100644 index 000000000000..ef4f058c20ff --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts @@ -0,0 +1,812 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Rockchip Electronics Co., Ltd. + * + * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3588s.dtsi" + +/ { + model = "RK3588S CoolPi 4 Model B"; + compatible = "coolpi,pi-4b", "rockchip,rk3588s"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdio; + mmc2 = &sdmmc; + }; + + analog-sound { + compatible = "audio-graph-card"; + dais = <&i2s0_8ch_p0>; + label = "rk3588-es8316"; + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_leds>; + + led0: led-green { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio0 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + led1: led-red { + color = <LED_COLOR_ID_RED>; + default-state = "off"; + function = LED_FUNCTION_WLAN; + gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usbdcin: vcc5v0-usbdcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usbdcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usbdcin>; + }; + + avdd0v85_pcie20: avdd0v85-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd0v85_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + vin-supply = <&vdd_0v85_s0>; + }; + + avdd1v8_pcie20: avdd1v8-pcie20-regulator { + compatible = "regulator-fixed"; + regulator-name = "avdd1v8_pcie20"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&avcc_1v8_s0>; + }; + + vcc3v3_mipi: vcc3v3-mipi-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>; + regulator-name = "vcc3v3_mipi"; + regulator-boot-on; + regulator-always-on; + vin-supply = <&vcc_3v3_s3>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_otg: vcc5v0-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_u3host_en>; + regulator-name = "vcc5v0_otg"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0_ps { + status = "okay"; +}; + +&combphy2_psu { + status = "okay"; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_lit_s0>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_big0_s0>; +}; + +&cpu_b2 { + cpu-supply = <&vdd_cpu_big1_s0>; +}; + +&i2c0 { + pinctrl-0 = <&i2c0m2_xfer>; + status = "okay"; + + vdd_cpu_big0_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big0_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_big1_s0: regulator@43 { + compatible = "rockchip,rk8603", "rockchip,rk8602"; + reg = <0x43>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu_big1_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1050000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c2 { + status = "okay"; + + vdd_npu_s0: regulator@42 { + compatible = "rockchip,rk8602"; + reg = <0x42>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_npu_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c6 { + pinctrl-0 = <&i2c6m3_xfer>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + +&i2c7 { + pinctrl-0 = <&i2c7m0_xfer>; + status = "okay"; + + es8316: audio-codec@11 { + compatible = "everest,es8316"; + reg = <0x11>; + assigned-clocks = <&cru I2S0_8CH_MCLKOUT>; + assigned-clock-rates = <12288000>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; +}; + +&pcie2x1l2 { + pinctrl-names = "default"; + pinctrl-0 = <&rtl8111_isolate>; + reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + led { + gpio_leds: gpio-leds { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>, + <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + rtl8111 { + rtl8111_isolate: rtl8111-isolate { + rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>, + <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vcc5v0_u3host_en: vcc5v0-u3host-en { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wireless-bluetooth { + bt_reset_gpio: bt-reset-pin { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_gpio: bt-wake-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host_irq: bt-wake-host-irq { + rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + wireless-wlan { + wifi_host_wake_irq: wifi-host-wake-irq { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + wifi_poweren_pin: wifi-poweren-pin { + rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&pwm2 { + pinctrl-0 = <&pwm2m1_pins>; + status = "okay"; +}; + +&pwm13 { + pinctrl-names = "active"; + pinctrl-0 = <&pwm13m2_pins>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8_s0>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + no-sdio; + no-sd; + non-removable; + status = "okay"; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + no-sd; + no-mmc; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdiom1_pins>,<&wifi_poweren_pin>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + no-sdio; + no-mmc; + sd-uhs-sdr104; + vmmc-supply = <&vcc_3v3_s3>; + vqmmc-supply = <&vccio_sd_s0>; + status = "okay"; +}; + +&spi2 { + assigned-clocks = <&cru CLK_SPI2>; + assigned-clock-rates = <200000000>; + num-cs = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>; + status = "okay"; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + gpio-controller; + #gpio-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, + <&rk806_dvs2_null>, <&rk806_dvs3_null>; + spi-max-frequency = <1000000>; + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc_1v1_nldo_s3>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + rk806_dvs1_null: dvs1-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs2_null: dvs2-null-pins { + pins = "gpio_pwrctrl2"; + function = "pin_fun0"; + }; + + rk806_dvs3_null: dvs3-null-pins { + pins = "gpio_pwrctrl3"; + function = "pin_fun0"; + }; + + regulators { + vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 { + regulator-name = "vdd_gpu_s0"; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <400>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 { + regulator-name = "vdd_cpu_lit_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-name = "vdd_log_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 { + regulator-name = "vdd_vdenc_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_ddr_s0: dcdc-reg5 { + regulator-name = "vdd_ddr_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + vdd2_ddr_s3: dcdc-reg6 { + regulator-name = "vdd2_ddr_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-name = "vdd_2v0_pldo_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vcc_3v3_s3: dcdc-reg8 { + regulator-name = "vcc_3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vddq_ddr_s0: dcdc-reg9 { + regulator-name = "vddq_ddr_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s3: dcdc-reg10 { + regulator-name = "vcc_1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-name = "avcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8_s0: pldo-reg2 { + regulator-name = "vcc_1v8_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + avdd_1v2_s0: pldo-reg3 { + regulator-name = "avdd_1v2_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-name = "vcc_3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-name = "vccio_sd_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + pldo6_s3: pldo-reg6 { + regulator-name = "pldo6_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-name = "vdd_0v75_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_ddr_pll_s0: nldo-reg2 { + regulator-name = "vdd_ddr_pll_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <850000>; + }; + }; + + avdd_0v75_s0: nldo-reg3 { + regulator-name = "avdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg4 { + regulator-name = "vdd_0v85_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v75_s0: nldo-reg5 { + regulator-name = "vdd_0v75_s0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy2 { + status = "okay"; +}; + +&u2phy3 { + status = "okay"; +}; + +&u2phy2_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&u2phy3_host { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +/* bt */ +&uart9 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart9m2_xfer &uart9m2_ctsn>; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts index 60f00ceb630e..dc677f29a9c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts @@ -44,7 +44,6 @@ mmc0 = &sdhci; mmc1 = &sdmmc; mmc2 = &sdio; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts index 82478a452533..f53e993c785e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-khadas-edge2.dts @@ -12,7 +12,6 @@ aliases { mmc0 = &sdhci; - serial2 = &uart2; }; chosen { diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts index e3a839a12dc6..25de4362af38 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts @@ -13,8 +13,8 @@ compatible = "xunlong,orangepi-5", "rockchip,rk3588s"; aliases { + ethernet0 = &gmac1; mmc0 = &sdmmc; - serial2 = &uart2; }; chosen { @@ -314,6 +314,7 @@ pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>, <&rk806_dvs2_null>, <&rk806_dvs3_null>; spi-max-frequency = <1000000>; + system-power-controller; vcc1-supply = <&vcc5v0_sys>; vcc2-supply = <&vcc5v0_sys>; @@ -660,3 +661,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts index 8347adcbd003..2002fd0221fa 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts @@ -12,9 +12,9 @@ compatible = "radxa,rock-5a", "rockchip,rk3588s"; aliases { + ethernet0 = &gmac1; mmc0 = &sdhci; mmc1 = &sdmmc; - serial2 = &uart2; }; analog-sound { @@ -114,6 +114,10 @@ }; }; +&combphy2_psu { + status = "okay"; +}; + &cpu_b0 { cpu-supply = <&vdd_cpu_big0_s0>; }; @@ -734,3 +738,7 @@ &usb_host1_ohci { status = "okay"; }; + +&usb_host2_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi index 8aa0499f9b03..36b1b7acfe6a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi @@ -18,6 +18,38 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + serial8 = &uart8; + serial9 = &uart9; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -362,6 +394,11 @@ #clock-cells = <0>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>, @@ -474,6 +511,16 @@ reg = <0x0 0xfd58c000 0x0 0x1000>; }; + vop_grf: syscon@fd5a4000 { + compatible = "rockchip,rk3588-vop-grf", "syscon"; + reg = <0x0 0xfd5a4000 0x0 0x2000>; + }; + + vo1_grf: syscon@fd5a8000 { + compatible = "rockchip,rk3588-vo-grf", "syscon"; + reg = <0x0 0xfd5a8000 0x0 0x100>; + }; + php_grf: syscon@fd5b0000 { compatible = "rockchip,rk3588-php-grf", "syscon"; reg = <0x0 0xfd5b0000 0x0 0x1000>; @@ -593,6 +640,74 @@ status = "disabled"; }; + vop: vop@fdd90000 { + compatible = "rockchip,rk3588-vop"; + reg = <0x0 0xfdd90000 0x0 0x4200>, <0x0 0xfdd95000 0x0 0x1000>; + reg-names = "vop", "gamma-lut"; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, + <&cru HCLK_VOP>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru DCLK_VOP2>, + <&cru DCLK_VOP3>, + <&cru PCLK_VOP_ROOT>; + clock-names = "aclk", + "hclk", + "dclk_vp0", + "dclk_vp1", + "dclk_vp2", + "dclk_vp3", + "pclk_vop"; + iommus = <&vop_mmu>; + power-domains = <&power RK3588_PD_VOP>; + rockchip,grf = <&sys_grf>; + rockchip,vop-grf = <&vop_grf>; + rockchip,vo1-grf = <&vo1_grf>; + rockchip,pmu = <&pmu>; + status = "disabled"; + + vop_out: ports { + #address-cells = <1>; + #size-cells = <0>; + + vp0: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + vp1: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + vp2: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + vp3: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; + }; + + vop_mmu: iommu@fdd97e00 { + compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu"; + reg = <0x0 0xfdd97e00 0x0 0x100>, <0x0 0xfdd97f00 0x0 0x100>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk", "iface"; + #iommu-cells = <0>; + power-domains = <&power RK3588_PD_VOP>; + status = "disabled"; + }; + uart0: serial@fd890000 { compatible = "rockchip,rk3588-uart", "snps,dw-apb-uart"; reg = <0x0 0xfd890000 0x0 0x100>; @@ -916,6 +1031,7 @@ reg = <RK3588_PD_USB>; clocks = <&cru PCLK_PHP_ROOT>, <&cru ACLK_USB_ROOT>, + <&cru ACLK_USB>, <&cru HCLK_USB_ROOT>, <&cru HCLK_HOST0>, <&cru HCLK_HOST_ARB0>, diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile index 97522fb0bf66..3ce81ad7116f 100644 --- a/arch/arm64/boot/dts/sprd/Makefile +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -2,4 +2,5 @@ dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \ sp9860g-1h10.dtb \ sp9863a-1h10.dtb \ - ums512-1h10.dtb + ums512-1h10.dtb \ + ums9620-2h10.dtb diff --git a/arch/arm64/boot/dts/sprd/ums512.dtsi b/arch/arm64/boot/dts/sprd/ums512.dtsi index 024be594c47d..dbdb79f8e959 100644 --- a/arch/arm64/boot/dts/sprd/ums512.dtsi +++ b/arch/arm64/boot/dts/sprd/ums512.dtsi @@ -96,7 +96,7 @@ CPU6: cpu@600 { device_type = "cpu"; - compatible = "arm,cortex-a55"; + compatible = "arm,cortex-a75"; reg = <0x0 0x600>; enable-method = "psci"; cpu-idle-states = <&CORE_PD>; @@ -104,7 +104,7 @@ CPU7: cpu@700 { device_type = "cpu"; - compatible = "arm,cortex-a55"; + compatible = "arm,cortex-a75"; reg = <0x0 0x700>; enable-method = "psci"; cpu-idle-states = <&CORE_PD>; @@ -113,7 +113,7 @@ idle-states { entry-method = "psci"; - CORE_PD: core-pd { + CORE_PD: cpu-pd { compatible = "arm,idle-state"; entry-latency-us = <4000>; exit-latency-us = <4000>; @@ -291,6 +291,7 @@ pll2: clock-controller@0 { compatible = "sprd,ums512-gc-pll"; reg = <0x0 0x100>; + clocks = <&ext_26m>; clock-names = "ext-26m"; #clock-cells = <1>; }; @@ -682,8 +683,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f040000 0 0x1000>; cpu = <&CPU0>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -699,8 +700,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f140000 0 0x1000>; cpu = <&CPU1>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -716,8 +717,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f240000 0 0x1000>; cpu = <&CPU2>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -733,8 +734,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f340000 0 0x1000>; cpu = <&CPU3>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -750,8 +751,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f440000 0 0x1000>; cpu = <&CPU4>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -767,8 +768,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f540000 0 0x1000>; cpu = <&CPU5>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -784,8 +785,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f640000 0 0x1000>; cpu = <&CPU6>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { @@ -801,8 +802,8 @@ compatible = "arm,coresight-etm4x", "arm,primecell"; reg = <0 0x3f740000 0 0x1000>; cpu = <&CPU7>; - clocks = <&ext_26m>, <&aon_clk CLK_CSSYS>, <&pll2 CLK_TWPLL_512M>; - clock-names = "apb_pclk", "clk_cs", "cs_src"; + clocks = <&ext_26m>; + clock-names = "apb_pclk"; out-ports { port { diff --git a/arch/arm64/boot/dts/sprd/ums9620-2h10.dts b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts new file mode 100644 index 000000000000..b35671192a72 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums9620-2h10.dts @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS9620-2h10 board DTS file + * + * Copyright (C) 2023, Unisoc Inc. + */ + +/dts-v1/; + +#include "ums9620.dtsi" + +/ { + model = "Unisoc UMS9620-2H10 Board"; + + compatible = "sprd,ums9620-2h10", "sprd,ums9620"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; + + chosen { + stdout-path = "serial1:921600n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/sprd/ums9620.dtsi b/arch/arm64/boot/dts/sprd/ums9620.dtsi new file mode 100644 index 000000000000..2191f0a4811b --- /dev/null +++ b/arch/arm64/boot/dts/sprd/ums9620.dtsi @@ -0,0 +1,245 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Unisoc UMS9620 DTS file + * + * Copyright (C) 2023, Unisoc Inc. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + core4 { + cpu = <&CPU4>; + }; + core5 { + cpu = <&CPU5>; + }; + core6 { + cpu = <&CPU6>; + }; + core7 { + cpu = <&CPU7>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x200>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x300>; + enable-method = "psci"; + cpu-idle-states = <&LIT_CORE_PD>; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x400>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x500>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x600>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "arm,cortex-a76"; + reg = <0x0 0x700>; + enable-method = "psci"; + cpu-idle-states = <&BIG_CORE_PD>; + }; + }; + + idle-states { + entry-method = "psci"; + LIT_CORE_PD: cpu-pd-lit { + compatible = "arm,idle-state"; + entry-latency-us = <1000>; + exit-latency-us = <500>; + min-residency-us = <2500>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + + BIG_CORE_PD: cpu-pd-big { + compatible = "arm,idle-state"; + entry-latency-us = <4000>; + exit-latency-us = <4000>; + min-residency-us = <10000>; + local-timer-stop; + arm,psci-suspend-param = <0x00010000>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, /* Physical Secure PPI */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, /* Physical Non-Secure PPI */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, /* Virtual PPI */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; /* Hipervisor PPI */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc: soc { + compatible = "simple-bus"; + ranges; + #address-cells = <2>; + #size-cells = <2>; + + gic: interrupt-controller@12000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x12000000 0 0x20000>, /* GICD */ + <0x0 0x12040000 0 0x100000>; /* GICR */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + redistributor-stride = <0x0 0x20000>; /* 128KB stride */ + #redistributor-regions = <1>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + apb@20200000 { + compatible = "simple-bus"; + ranges = <0 0 0x20200000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@0 { + compatible = "sprd,ums9620-uart", + "sprd,sc9836-uart"; + reg = <0 0x100>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@10000 { + compatible = "sprd,ums9620-uart", + "sprd,sc9836-uart"; + reg = <0x10000 0x100>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_26m>; + status = "disabled"; + }; + }; + }; + + ext_26m: clk-26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; + + ext_4m: clk-4m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <4000000>; + clock-output-names = "ext-4m"; + }; + + ext_32k: clk-32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; + }; + + rco_100m: clk-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "rco-100m"; + }; + + dphy_312m5: dphy-312m5 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <312500000>; + clock-output-names = "dphy-312m5"; + }; + + dphy_416m7: dphy-416m7 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <416700000>; + clock-output-names = "dphy-416m7"; + }; +}; diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi index 124403f5f1f4..96859d098ef8 100644 --- a/arch/arm64/boot/dts/st/stm32mp251.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi @@ -140,6 +140,22 @@ }; }; + bsec: efuse@44000000 { + compatible = "st,stm32mp25-bsec"; + reg = <0x44000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + part_number_otp@24 { + reg = <0x24 0x4>; + }; + + package_otp@1e8 { + reg = <0x1e8 0x1>; + bits = <0 3>; + }; + }; + syscfg: syscon@44230000 { compatible = "st,stm32mp25-syscfg", "syscon"; reg = <0x44230000 0x10000>; diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi index bb50a9f7db4a..aaffb50b8b60 100644 --- a/arch/arm64/boot/dts/tesla/fsd.dtsi +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi @@ -342,6 +342,18 @@ #clock-cells = <0>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mfc_left: region@84000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0 0x84000000 0 0x8000000>; + }; + }; + soc: soc@0 { compatible = "simple-bus"; #address-cells = <2>; @@ -581,7 +593,7 @@ }; serial_0: serial@14180000 { - compatible = "samsung,exynos4210-uart"; + compatible = "tesla,fsd-uart", "samsung,exynos4210-uart"; reg = <0x0 0x14180000 0x0 0x100>; interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 1>, <&pdma1 0>; @@ -593,7 +605,7 @@ }; serial_1: serial@14190000 { - compatible = "samsung,exynos4210-uart"; + compatible = "tesla,fsd-uart", "samsung,exynos4210-uart"; reg = <0x0 0x14190000 0x0 0x100>; interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 3>, <&pdma1 2>; @@ -605,12 +617,12 @@ }; pmu_system_controller: system-controller@11400000 { - compatible = "samsung,exynos7-pmu", "syscon"; + compatible = "tesla,fsd-pmu", "samsung,exynos7-pmu", "syscon"; reg = <0x0 0x11400000 0x0 0x5000>; }; watchdog_0: watchdog@100a0000 { - compatible = "samsung,exynos7-wdt"; + compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt"; reg = <0x0 0x100a0000 0x0 0x100>; interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -619,7 +631,7 @@ }; watchdog_1: watchdog@100b0000 { - compatible = "samsung,exynos7-wdt"; + compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt"; reg = <0x0 0x100b0000 0x0 0x100>; interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -628,7 +640,7 @@ }; watchdog_2: watchdog@100c0000 { - compatible = "samsung,exynos7-wdt"; + compatible = "tesla,fsd-wdt", "samsung,exynos7-wdt"; reg = <0x0 0x100c0000 0x0 0x100>; interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; samsung,syscon-phandle = <&pmu_system_controller>; @@ -637,7 +649,7 @@ }; pwm_0: pwm@14100000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm"; reg = <0x0 0x14100000 0x0 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; @@ -647,7 +659,7 @@ }; pwm_1: pwm@14110000 { - compatible = "samsung,exynos4210-pwm"; + compatible = "tesla,fsd-pwm", "samsung,exynos4210-pwm"; reg = <0x0 0x14110000 0x0 0x100>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; @@ -657,7 +669,7 @@ }; hsi2c_0: i2c@14200000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14200000 0x0 0x1000>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -670,7 +682,7 @@ }; hsi2c_1: i2c@14210000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14210000 0x0 0x1000>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -683,7 +695,7 @@ }; hsi2c_2: i2c@14220000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14220000 0x0 0x1000>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -696,7 +708,7 @@ }; hsi2c_3: i2c@14230000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14230000 0x0 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -709,7 +721,7 @@ }; hsi2c_4: i2c@14240000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14240000 0x0 0x1000>; interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -722,7 +734,7 @@ }; hsi2c_5: i2c@14250000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14250000 0x0 0x1000>; interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -735,7 +747,7 @@ }; hsi2c_6: i2c@14260000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14260000 0x0 0x1000>; interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -748,7 +760,7 @@ }; hsi2c_7: i2c@14270000 { - compatible = "samsung,exynos7-hsi2c"; + compatible = "tesla,fsd-hsi2c", "samsung,exynos7-hsi2c"; reg = <0x0 0x14270000 0x0 0x1000>; interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -956,6 +968,15 @@ clock-names = "fin_pll", "mct"; }; + mfc: mfc@12880000 { + compatible = "tesla,fsd-mfc"; + reg = <0x0 0x12880000 0x0 0x10000>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "mfc"; + clocks = <&clock_mfc MFC_MFC_IPCLKPORT_ACLK>; + memory-region = <&mfc_left>; + }; + ufs: ufs@15120000 { compatible = "tesla,fsd-ufs"; reg = <0x0 0x15120000 0x0 0x200>, /* 0: HCI standard */ diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile index 77a347f9f47d..52c1dc910308 100644 --- a/arch/arm64/boot/dts/ti/Makefile +++ b/arch/arm64/boot/dts/ti/Makefile @@ -9,20 +9,20 @@ # alphabetically. # Boards with AM62x SoC -k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo -k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am625-beagleplay-csi2-tevi-ov5640.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dahlia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am625-sk-hdmi-audio.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-hdmi-audio.dtb # Boards with AM62Ax SoC dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb @@ -30,19 +30,19 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb # Boards with AM62Px SoC dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb +# Common overlays for SK-AM62* family of boards +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-tevi-ov5640.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-csi2-imx219.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am62x-sk-hdmi-audio.dtbo + # Boards with AM64x SoC dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb - -k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ - k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo -k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ - k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo - -dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb -dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl-wlan.dtb +dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo # Boards with AM65x SoC k3-am654-gp-evm-dtbs := k3-am654-base-board.dtb k3-am654-base-board-rocktech-rk101-panel.dtbo @@ -67,6 +67,7 @@ k3-j721e-evm-dtbs := k3-j721e-common-proc-board.dtb k3-j721e-evm-quad-port-eth-e dtb-$(CONFIG_ARCH_K3) += k3-j721e-beagleboneai64.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-gesi-exp-board.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-j721e-evm-pcie0-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb # Boards with J721s2 SoC @@ -75,14 +76,59 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb +dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo # Boards with J784s4 SoC dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j784s4-evm.dtb +# Build time test only, enabled by CONFIG_OF_ALL_DTBS +k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \ + k3-am625-beagleplay-csi2-ov5640.dtbo +k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \ + k3-am625-beagleplay-csi2-tevi-ov5640.dtbo +k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-imx219.dtbo +k3-am625-sk-csi2-ov5640-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-ov5640.dtbo +k3-am625-sk-csi2-tevi-ov5640-dtbs := k3-am625-sk.dtb \ + k3-am62x-sk-csi2-tevi-ov5640.dtbo +k3-am625-sk-hdmi-audio-dtbs := k3-am625-sk.dtb k3-am62x-sk-hdmi-audio.dtbo +k3-am62-lp-sk-hdmi-audio-dtbs := k3-am62-lp-sk.dtb k3-am62x-sk-hdmi-audio.dtbo +k3-am62a7-sk-csi2-imx219-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-imx219.dtbo +k3-am62a7-sk-csi2-ov5640-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-ov5640.dtbo +k3-am62a7-sk-csi2-tevi-ov5640-dtbs := k3-am62a7-sk.dtb \ + k3-am62x-sk-csi2-tevi-ov5640.dtbo +k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ + k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo +k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \ + k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo +k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \ + k3-j721e-evm-pcie0-ep.dtbo +k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \ + k3-j721s2-evm-pcie1-ep.dtbo +dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \ + k3-am625-beagleplay-csi2-tevi-ov5640.dtb \ + k3-am625-sk-csi2-imx219.dtb \ + k3-am625-sk-csi2-ov5640.dtb \ + k3-am625-sk-csi2-tevi-ov5640.dtb \ + k3-am625-sk-hdmi-audio.dtb \ + k3-am62-lp-sk-hdmi-audio.dtb \ + k3-am62a7-sk-csi2-imx219.dtb \ + k3-am62a7-sk-csi2-ov5640.dtb \ + k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \ + k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \ + k3-j721e-evm-pcie0-ep.dtb \ + k3-j721s2-evm-pcie1-ep.dtb + # Enable support for device-tree overlays +DTC_FLAGS_k3-am625-beagleplay += -@ DTC_FLAGS_k3-am625-sk += -@ DTC_FLAGS_k3-am62-lp-sk += -@ +DTC_FLAGS_k3-am62a7-sk += -@ +DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@ DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@ DTC_FLAGS_k3-j721e-common-proc-board += -@ DTC_FLAGS_k3-j721s2-common-proc-board += -@ diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi index e5c64c86d1d5..464b7565d085 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi @@ -121,8 +121,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; @@ -138,8 +143,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; @@ -502,6 +512,9 @@ main_gpio0: gpio@600000 { compatible = "ti,am64-gpio", "ti,keystone-gpio"; reg = <0x0 0x00600000 0x0 0x100>; + gpio-ranges = <&main_pmx0 0 0 32>, + <&main_pmx0 32 33 38>, + <&main_pmx0 70 72 22>; gpio-controller; #gpio-cells = <2>; interrupt-parent = <&main_gpio_intr>; @@ -520,6 +533,10 @@ compatible = "ti,am64-gpio", "ti,keystone-gpio"; reg = <0x0 0x00601000 0x0 0x100>; gpio-controller; + gpio-ranges = <&main_pmx0 0 94 41>, + <&main_pmx0 41 136 6>, + <&main_pmx0 47 143 3>, + <&main_pmx0 50 149 2>; #gpio-cells = <2>; interrupt-parent = <&main_gpio_intr>; interrupts = <180>, <181>, <182>, @@ -675,6 +692,15 @@ }; }; + gpu: gpu@fd00000 { + compatible = "ti,am62-gpu", "img,img-axe"; + reg = <0x00 0x0fd00000 0x00 0x20000>; + clocks = <&k3_clks 187 0>; + clock-names = "core"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>; + }; + cpsw3g: ethernet@8000000 { compatible = "ti,am642-cpsw-nuss"; #address-cells = <2>; @@ -965,4 +991,66 @@ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_bcdma 0 0x4700 0>; + dma-names = "rx0"; + reg = <0x00 0x30102000 0x00 0x1000>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; + }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi index 013357d17d48..bf6d27e70bc4 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi @@ -214,6 +214,5 @@ /* Verdin UART_2 */ &wkup_uart0 { - /* FIXME: WKUP UART0 is used by DM firmware */ - status = "reserved"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi index 6701cb8974bb..680071688dcb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi @@ -235,6 +235,5 @@ /* Verdin UART_2 */ &wkup_uart0 { - /* FIXME: WKUP UART0 is used by DM firmware */ - status = "reserved"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi new file mode 100644 index 000000000000..17b93534f658 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-mallow.dtsi @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * Common dtsi for Verdin AM62 SoM on Mallow carrier board + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +#include <dt-bindings/leds/common.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi1_clk_gpio>, + <&pinctrl_qspi1_cs_gpio>, + <&pinctrl_qspi1_io0_gpio>, + <&pinctrl_qspi1_io1_gpio>; + + /* SODIMM 52 - USER_LED_1_RED */ + led-0 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 54 - USER_LED_1_GREEN */ + led-1 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <1>; + gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 56 - USER_LED_2_RED */ + led-2 { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + /* SODIMM 58 - USER_LED_2_GREEN */ + led-3 { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_DEBUG; + function-enumerator = <2>; + gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Verdin ETH */ +&cpsw3g { + status = "okay"; +}; + +/* Verdin MDIO */ +&cpsw3g_mdio { + status = "okay"; +}; + +/* Verdin ETH_1*/ +&cpsw_port1 { + status = "okay"; +}; + +/* Verdin PWM_1 and PWM_2*/ +&epwm0 { + status = "okay"; +}; + +/* Verdin PWM_3 DSI */ +&epwm1 { + status = "okay"; +}; + +&main_gpio0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ctrl_sleep_moci>, + <&pinctrl_gpio_1>, + <&pinctrl_gpio_2>, + <&pinctrl_gpio_3>, + <&pinctrl_gpio_4>; +}; + +/* Verdin I2C_1 */ +&main_i2c1 { + status = "okay"; + + /* Temperature sensor */ + sensor@4f { + compatible = "ti,tmp1075"; + reg = <0x4f>; + }; + + /* EEPROM */ + eeprom@57 { + compatible = "st,24c02", "atmel,24c02"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +/* Verdin I2C_2 DSI */ +&main_i2c2 { + status = "okay"; +}; + +/* Verdin I2C_4 CSI */ +&main_i2c3 { + status = "okay"; +}; + +/* Verdin CAN_1 */ +&main_mcan0 { + status = "okay"; +}; + +/* Verdin SPI_1 */ +&main_spi1 { + pinctrl-0 = <&pinctrl_spi1>, + <&pinctrl_spi1_cs0>, + <&pinctrl_qspi1_cs2_gpio>; + cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* Verdin UART_3 */ +&main_uart0 { + status = "okay"; +}; + +/* Verdin UART_1 */ +&main_uart1 { + status = "okay"; +}; + +/* Verdin I2C_3_HDMI */ +&mcu_i2c0 { + status = "okay"; +}; + +/* Verdin CAN_2 */ +&mcu_mcan0 { + status = "okay"; +}; + +/* Verdin UART_4 */ +&mcu_uart0 { + status = "okay"; +}; + +/* Verdin SD_1 */ +&sdhci1 { + status = "okay"; +}; + +/* Verdin USB_1 */ +&usbss0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +/* Verdin USB_2 */ +&usbss1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* Verdin CTRL_WAKE1_MICO# */ +&verdin_gpio_keys { + status = "okay"; +}; + +/* Verdin UART_2 */ +&wkup_uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi index c685df7deaee..997dfafd27eb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-yavia.dtsi @@ -207,6 +207,5 @@ /* Verdin UART_2 */ &wkup_uart0 { - /* FIXME: WKUP UART0 is used by DM firmware */ - status = "reserved"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi index 5db52f237253..6a06724b6d16 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi @@ -233,6 +233,13 @@ >; }; + /* Verdin SPI_1 CS as GPIO */ + pinctrl_qspi1_io4_gpio: main-gpio0-7-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x001c, PIN_INPUT, 7) /* (J23) OSPI0_D4.GPIO0_7 */ /* SODIMM 202 */ + >; + }; + /* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */ pinctrl_qspi1_cs_gpio: main-gpio0-11-default-pins { pinctrl-single,pins = < @@ -599,12 +606,18 @@ pinctrl_spi1: main-spi1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x0020, PIN_INPUT, 1) /* (J25) OSPI0_D5.SPI1_CLK */ /* SODIMM 196 */ - AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */ AM62X_IOPAD(0x0024, PIN_INPUT, 1) /* (H25) OSPI0_D6.SPI1_D0 */ /* SODIMM 200 */ AM62X_IOPAD(0x0028, PIN_INPUT, 1) /* (J22) OSPI0_D7.SPI1_D1 */ /* SODIMM 198 */ >; }; + /* Verdin SPI_1 CS */ + pinctrl_spi1_cs0: main-spi1-cs0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x001c, PIN_INPUT, 1) /* (J23) OSPI0_D4.SPI1_CS0 */ /* SODIMM 202 */ + >; + }; + /* ETH_25MHz_CLK */ pinctrl_eth_clock: main-system-clkout0-default-pins { pinctrl-single,pins = < @@ -1278,7 +1291,7 @@ /* Verdin SPI_1 */ &main_spi1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_spi1>; + pinctrl-0 = <&pinctrl_spi1>, <&pinctrl_spi1_cs0>; ti,pindir-d0-out-d1-in; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso new file mode 100644 index 000000000000..5e80ca7033ba --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-ov5640.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&main_gpio0 { + p11-hog { + /* P11 - CSI2_CAMERA_GPIO1 */ + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CSI2_CAMERA_GPIO1"; + }; +}; + +&wkup_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&ti_csi2rx0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso new file mode 100644 index 000000000000..5e1cbbc27c8f --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtso @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Technexion TEVI-OV5640-*-RPI - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_gpio0 { + p11-hog { + /* P11 - CSI2_CAMERA_GPIO1 */ + gpio-hog; + gpios = <11 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "CSI2_CAMERA_GPIO1"; + }; +}; + +&wkup_i2c0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&dphy0 { + status = "okay"; +}; + +&ti_csi2rx0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 9a6bd0a3c94f..eadbdd9ffe37 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -443,7 +443,7 @@ >; }; - console_pins_default: console-default-pins { + main_uart0_pins_default: main-uart0-default-pins { bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x01c8, PIN_INPUT, 0) /* (D14) UART0_RXD */ @@ -877,7 +877,7 @@ &main_uart0 { bootph-all; pinctrl-names = "default"; - pinctrl-0 = <&console_pins_default>; + pinctrl-0 = <&main_uart0_pins_default>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts index a438baf542c2..4bc0134c987d 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts @@ -35,6 +35,18 @@ standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; }; + hdmi0: connector-hdmi { + compatible = "hdmi-connector"; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&sii9022_out>; + }; + }; + }; + keys { compatible = "gpio-keys"; autorepeat; @@ -93,6 +105,37 @@ >; }; + hdmi_int_pins_default: hdmi-int-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */ + >; + }; + + main_dss0_pins_default: main-dss0-default-pins { + pinctrl-single,pins = < + AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */ + AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */ + AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */ + AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */ + AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */ + AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */ + AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */ + AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */ + AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */ + AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */ + AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */ + AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */ + AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */ + AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */ + AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */ + AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */ + AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */ + AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */ + AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */ + AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */ + >; + }; + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */ @@ -184,10 +227,30 @@ }; }; +&dss { + pinctrl-names = "default"; + pinctrl-0 = <&main_dss0_pins_default>; + status = "okay"; +}; + +&dss_ports { + #address-cells = <1>; + #size-cells = <0>; + + /* VP2: DPI/HDMI Output */ + port@1 { + reg = <1>; + + dpi1_out: endpoint { + remote-endpoint = <&sii9022_in>; + }; + }; +}; + &main_i2c1 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; - clock-frequency = <400000>; + clock-frequency = <100000>; status = "okay"; gpio_exp: gpio-expander@21 { @@ -201,12 +264,43 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; - gpio-line-names = "GPIO0_HDMI_RST", "GPIO1_CAN0_nEN", + gpio-line-names = "", "GPIO1_CAN0_nEN", "GPIO2_LED2", "GPIO3_LVDS_GPIO", "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN", "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET"; }; + sii9022: bridge-hdmi@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + + interrupt-parent = <&main_gpio0>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_int_pins_default>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + sii9022_in: endpoint { + remote-endpoint = <&dpi1_out>; + }; + }; + + port@1 { + reg = <1>; + + sii9022_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + eeprom@51 { compatible = "atmel,24c02"; pagesize = <16>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts new file mode 100644 index 000000000000..9cae12106e0e --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-mallow.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-nonwifi.dtsi" +#include "k3-am62-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin AM62 on Mallow Board"; + compatible = "toradex,verdin-am62-nonwifi-mallow", + "toradex,verdin-am62-nonwifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts new file mode 100644 index 000000000000..81d834b22649 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-mallow.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright 2023 Toradex + * + * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62 + * https://www.toradex.com/products/carrier-board/mallow-carrier-board + */ + +/dts-v1/; + +#include "k3-am625.dtsi" +#include "k3-am62-verdin.dtsi" +#include "k3-am62-verdin-wifi.dtsi" +#include "k3-am62-verdin-mallow.dtsi" + +/ { + model = "Toradex Verdin AM62 WB on Mallow Board"; + compatible = "toradex,verdin-am62-wifi-mallow", + "toradex,verdin-am62-wifi", + "toradex,verdin-am62", + "ti,am625"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi index 4ae7fdc5221b..f0b8c9ab1459 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi @@ -101,8 +101,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; ti,sci = <&dmsc>; @@ -117,8 +122,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; ti,sci = <&dmsc>; @@ -144,6 +154,44 @@ }; }; + dmss_csi: bus@4e000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-ranges; + ranges = <0x00 0x4e000000 0x00 0x4e000000 0x00 0x300000>; + + ti,sci-dev-id = <198>; + + inta_main_dmss_csi: interrupt-controller@4e0a0000 { + compatible = "ti,sci-inta"; + reg = <0x00 0x4e0a0000 0x00 0x8000>; + #interrupt-cells = <0>; + interrupt-controller; + interrupt-parent = <&gic500>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <200>; + ti,interrupt-ranges = <0 237 8>; + ti,unmapped-event-sources = <&main_bcdma_csi>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + }; + + main_bcdma_csi: dma-controller@4e230000 { + compatible = "ti,am62a-dmss-bcdma-csirx"; + reg = <0x00 0x4e230000 0x00 0x100>, + <0x00 0x4e180000 0x00 0x8000>, + <0x00 0x4e100000 0x00 0x10000>; + reg-names = "gcfg", "rchanrt", "ringrt"; + msi-parent = <&inta_main_dmss_csi>; + #dma-cells = <3>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <199>; + ti,sci-rm-range-rchan = <0x21>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + }; + }; + dmsc: system-controller@44043000 { compatible = "ti,k2g-sci"; reg = <0x00 0x44043000 0x00 0xfe0>; @@ -462,7 +510,7 @@ <193>, <194>, <195>; interrupt-controller; #interrupt-cells = <2>; - ti,ngpio = <87>; + ti,ngpio = <92>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 77 0>; @@ -480,7 +528,7 @@ <183>, <184>, <185>; interrupt-controller; #interrupt-cells = <2>; - ti,ngpio = <88>; + ti,ngpio = <52>; ti,davinci-gpio-unbanked = <0>; power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 78 0>; @@ -876,4 +924,65 @@ power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; status = "disabled"; }; + + ti_csi2rx0: ticsi2rx@30102000 { + compatible = "ti,j721e-csi2rx-shim"; + dmas = <&main_bcdma_csi 0 0x5000 0>; + dma-names = "rx0"; + reg = <0x00 0x30102000 0x00 0x1000>; + power-domains = <&k3_pds 182 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + cdns_csi2rx0: csi-bridge@30101000 { + compatible = "ti,j721e-csi2rx", "cdns,csi2rx"; + reg = <0x00 0x30101000 0x00 0x1000>; + clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>, + <&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>; + clock-names = "sys_clk", "p_clk", "pixel_if0_clk", + "pixel_if1_clk", "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + csi0_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + csi0_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + csi0_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + csi0_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + }; + }; + }; + + dphy0: phy@30110000 { + compatible = "cdns,dphy-rx"; + reg = <0x00 0x30110000 0x00 0x1100>; + #phy-cells = <0>; + power-domains = <&k3_pds 185 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 8f64ac2c7568..7b7142586295 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -274,6 +274,12 @@ AM62AX_IOPAD(0x084, PIN_INPUT, 2) /* (L18) GPMC0_ADVn_ALE.MCASP1_AXR2 */ >; }; + + main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { + pinctrl-single,pins = < + AM62AX_IOPAD(0x01d4, PIN_INPUT, 7) /* (C15) UART0_RTSn.GPIO1_23 */ + >; + }; }; &mcu_pmx0 { @@ -407,6 +413,12 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + interrupt-parent = <&main_gpio1>; + interrupts = <23 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", "BT_EN_SOC", "MMC1_SD_EN", @@ -434,6 +446,33 @@ DRVDD-supply = <&vcc_3v3_sys>; DVDD-supply = <&buck5>; }; + + exp2: gpio@23 { + compatible = "ti,tca6424"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "", "", + "", "", + "", "", + "", "", + "WL_LT_EN", "CSI_RSTz", + "", "", + "", "", + "", "", + "SPI0_FET_SEL", "SPI0_FET_OE", + "RGMII2_BRD_CONN_DET", "CSI_SEL2", + "CSI_EN", "AUTO_100M_1000M_CONFIG", + "CSI_VLDO_SEL", "SoC_WLAN_SDIO_RST"; + }; +}; + +&main_i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; }; &sdhci1 { diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi index 963758c7d377..4c51bae06b57 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi @@ -101,8 +101,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; @@ -119,8 +124,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x10000>, + <0x00 0x484a0000 0x00 0x2000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x1000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; bootph-all; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index f377eadef0c1..1773c05f752c 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -598,3 +598,12 @@ status = "reserved"; bootph-all; }; + +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + +&mcu_gpio_intr { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 19f57ead4ebd..33768c02d8eb 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -399,6 +399,13 @@ }; }; +&main_i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + clock-frequency = <400000>; +}; + &sdhci0 { bootph-all; status = "okay"; @@ -517,3 +524,12 @@ }; }; }; + +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + +&mcu_gpio_intr { + status = "reserved"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso new file mode 100644 index 000000000000..6f4cd73c2f43 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-imx219.dtso @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * IMX219 (RPi v2) Camera Module + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_imx219_fixed: imx219-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@10 { + compatible = "sony,imx219"; + reg = <0x10>; + + clocks = <&clk_imx219_fixed>; + clock-names = "xclk"; + + reset-gpios = <&exp1 13 GPIO_ACTIVE_HIGH>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + link-frequencies = /bits/ 64 <456000000>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso new file mode 100644 index 000000000000..9323a4b38389 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-ov5640.dtso @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ALINX AN5641 & Digilent PCam 5C - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso new file mode 100644 index 000000000000..dcaa33a4c8d3 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Technexion TEVI-OV5640-*-RPI - OV5640 camera module + * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/gpio/gpio.h> + +&{/} { + clk_ov5640_fixed: ov5640-xclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; +}; + +&main_i2c2 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9543"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + /* CAM port */ + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + + clocks = <&clk_ov5640_fixed>; + clock-names = "xclk"; + powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>; + + port { + csi2_cam0: endpoint { + remote-endpoint = <&csi2rx0_in_sensor>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + }; + }; +}; + +&cdns_csi2rx0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi0_port0: port@0 { + reg = <0>; + status = "okay"; + + csi2rx0_in_sensor: endpoint { + remote-endpoint = <&csi2_cam0>; + bus-type = <4>; /* CSI2 DPHY. */ + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; +}; + +&ti_csi2rx0 { + status = "okay"; +}; + +&dphy0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi index 0be642bc1b86..e348114f42e0 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi @@ -63,7 +63,7 @@ #phy-cells = <1>; }; - epwm_tbclk: clock-controller@4140 { + epwm_tbclk: clock-controller@4130 { compatible = "ti,am64-epwm-tbclk"; reg = <0x4130 0x4>; #clock-cells = <1>; @@ -138,8 +138,13 @@ <0x00 0x4c000000 0x00 0x20000>, <0x00 0x4a820000 0x00 0x20000>, <0x00 0x4aa40000 0x00 0x20000>, - <0x00 0x4bc00000 0x00 0x100000>; - reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4bc00000 0x00 0x100000>, + <0x00 0x48600000 0x00 0x8000>, + <0x00 0x484a4000 0x00 0x2000>, + <0x00 0x484c2000 0x00 0x2000>, + <0x00 0x48420000 0x00 0x2000>; + reg-names = "gcfg", "bchanrt", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "bchan"; msi-parent = <&inta_main_dmss>; #dma-cells = <3>; @@ -155,8 +160,13 @@ reg = <0x00 0x485c0000 0x00 0x100>, <0x00 0x4a800000 0x00 0x20000>, <0x00 0x4aa00000 0x00 0x40000>, - <0x00 0x4b800000 0x00 0x400000>; - reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt"; + <0x00 0x4b800000 0x00 0x400000>, + <0x00 0x485e0000 0x00 0x20000>, + <0x00 0x484a0000 0x00 0x4000>, + <0x00 0x484c0000 0x00 0x2000>, + <0x00 0x48430000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", "ringrt", + "ring", "tchan", "rchan", "rflow"; msi-parent = <&inta_main_dmss>; #dma-cells = <2>; @@ -623,6 +633,7 @@ ti,otap-del-sel-mmc-hs = <0x0>; ti,otap-del-sel-ddr52 = <0x6>; ti,otap-del-sel-hs200 = <0x7>; + status = "disabled"; }; sdhci1: mmc@fa00000 { @@ -641,6 +652,7 @@ ti,otap-del-sel-sdr104 = <0x6>; ti,otap-del-sel-ddr50 = <0x9>; ti,clkbuf-sel = <0x7>; + status = "disabled"; }; cpsw3g: ethernet@8000000 { diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi index f87f09d83c95..1678e74cb750 100644 --- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi @@ -29,7 +29,7 @@ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; }; - reserved-memory { + reserved_memory: reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; @@ -39,6 +39,54 @@ alignment = <0x1000>; no-map; }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; }; leds { @@ -166,6 +214,34 @@ status = "disabled"; }; +&mailbox0_cluster2 { + status = "okay"; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster4 { + status = "okay"; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + &main_i2c0 { status = "okay"; pinctrl-names = "default"; @@ -191,6 +267,30 @@ }; }; +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + &ospi0 { status = "okay"; pinctrl-names = "default"; @@ -211,6 +311,7 @@ }; &sdhci0 { + status = "okay"; bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 4dba18941015..8c5651d2cf5d 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -468,11 +468,15 @@ bootph-all; }; -/* mcu_gpio0 is reserved for mcu firmware usage */ +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; }; +&mcu_gpio_intr { + status = "reserved"; +}; + &main_spi0 { status = "okay"; pinctrl-names = "default"; @@ -487,17 +491,19 @@ }; }; +/* eMMC */ &sdhci0 { - /* emmc */ + status = "okay"; bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; disable-wp; }; +/* SD/MMC */ &sdhci1 { - /* SD/MMC */ bootph-all; + status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts index 9175e96842d8..53b64e55413f 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts @@ -264,6 +264,7 @@ }; &sdhci1 { + status = "okay"; vmmc-supply = <&vcc_3v3_mmc>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index f29c8a9b59ba..1dddd6fc1a0d 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -433,12 +433,17 @@ }; }; -/* mcu_gpio0 is reserved for mcu firmware usage */ +/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */ &mcu_gpio0 { status = "reserved"; }; +&mcu_gpio_intr { + status = "reserved"; +}; + &sdhci0 { + status = "okay"; vmmc-supply = <&wlan_en>; bus-width = <4>; non-removable; @@ -458,9 +463,10 @@ }; }; +/* SD/MMC */ &sdhci1 { - /* SD/MMC */ bootph-all; + status = "okay"; vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>; diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts index d95d80076a42..55102d35cecc 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts @@ -425,7 +425,6 @@ ti,driver-strength-ohm = <50>; ti,fails-without-test-cd; /* Enabled by overlay */ - status = "disabled"; }; &tscadc0 { diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi index d82d4a98306a..6c785eff7d2f 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi @@ -219,6 +219,7 @@ }; &sdhci0 { + status = "okay"; non-removable; disable-wp; no-sdio; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi index 51f902fa35a7..1d1979859583 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) Siemens AG, 2021 + * Copyright (c) Siemens AG, 2021-2023 * * Authors: * Jan Kiszka <jan.kiszka@siemens.com> @@ -44,3 +44,11 @@ &tx_pru2_1 { status = "disabled"; }; + +&icssg0_eth { + status = "disabled"; +}; + +&icssg0_mdio { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi index e9419c4fe605..e9b57b87e42e 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi @@ -20,7 +20,9 @@ &main_gpio1 { pinctrl-names = "default"; - pinctrl-0 = <&cp2102n_reset_pin_default>; + pinctrl-0 = + <&main_pcie_enable_pins_default>, + <&cp2102n_reset_pin_default>; gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi index ba1c14a54acf..61a634afaa4f 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi @@ -9,14 +9,26 @@ * Common bits of the IOT2050 Basic and Advanced variants, PG1 and PG2 */ -#include "k3-am654.dtsi" #include <dt-bindings/phy/phy.h> +#include <dt-bindings/net/ti-dp83867.h> / { aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + i2c0 = &wkup_i2c0; + i2c1 = &mcu_i2c0; + i2c2 = &main_i2c0; + i2c3 = &main_i2c1; + i2c4 = &main_i2c2; + i2c5 = &main_i2c3; spi0 = &mcu_spi0; mmc0 = &sdhci1; mmc1 = &sdhci0; + ethernet1 = &icssg0_emac0; + ethernet2 = &icssg0_emac1; }; chosen { @@ -101,9 +113,498 @@ #clock-cells = <0>; clock-frequency = <19200000>; }; + + /* Dual Ethernet application node on PRU-ICSSG0 */ + icssg0_eth: icssg0-eth { + compatible = "ti,am654-icssg-prueth"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_rgmii_pins_default>; + sram = <&msmc_ram>; + + ti,prus = <&pru0_0>, <&rtu0_0>, <&tx_pru0_0>, + <&pru0_1>, <&rtu0_1>, <&tx_pru0_1>; + firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu0-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru0-prueth-fw.elf", + "ti-pruss/am65x-sr2-pru1-prueth-fw.elf", + "ti-pruss/am65x-sr2-rtu1-prueth-fw.elf", + "ti-pruss/am65x-sr2-txpru1-prueth-fw.elf"; + + ti,pruss-gp-mux-sel = <2>, /* MII mode */ + <2>, + <2>, + <2>, /* MII mode */ + <2>, + <2>; + + ti,mii-g-rt = <&icssg0_mii_g_rt>; + ti,mii-rt = <&icssg0_mii_rt>; + ti,iep = <&icssg0_iep0>, <&icssg0_iep1>; + + interrupt-parent = <&icssg0_intc>; + interrupts = <24 0 2>, <25 1 3>; + interrupt-names = "tx_ts0", "tx_ts1"; + + dmas = <&main_udmap 0xc100>, /* egress slice 0 */ + <&main_udmap 0xc101>, /* egress slice 0 */ + <&main_udmap 0xc102>, /* egress slice 0 */ + <&main_udmap 0xc103>, /* egress slice 0 */ + <&main_udmap 0xc104>, /* egress slice 1 */ + <&main_udmap 0xc105>, /* egress slice 1 */ + <&main_udmap 0xc106>, /* egress slice 1 */ + <&main_udmap 0xc107>, /* egress slice 1 */ + <&main_udmap 0x4100>, /* ingress slice 0 */ + <&main_udmap 0x4101>; /* ingress slice 1 */ + dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3", + "tx1-0", "tx1-1", "tx1-2", "tx1-3", + "rx0", "rx1"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + icssg0_emac0: port@0 { + reg = <0>; + phy-handle = <&icssg0_eth0_phy>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4100>; + ti,half-duplex-capable; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + + icssg0_emac1: port@1 { + reg = <1>; + phy-handle = <&icssg0_eth1_phy>; + phy-mode = "rgmii-id"; + ti,syscon-rgmii-delay = <&scm_conf 0x4104>; + ti,half-duplex-capable; + /* Filled in by bootloader */ + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; }; &wkup_pmx0 { + pinctrl-names = + "default", + "d0-uart0-rxd", "d0-gpio", "d0-gpio-pullup", "d0-gpio-pulldown", + "d1-uart0-txd", "d1-gpio", "d1-gpio-pullup", "d1-gpio-pulldown", + "d2-uart0-ctsn", "d2-gpio", "d2-gpio-pullup", "d2-gpio-pulldown", + "d3-uart0-rtsn", "d3-gpio", "d3-gpio-pullup", "d3-gpio-pulldown", + "d10-spi0-cs0", "d10-gpio", "d10-gpio-pullup", "d10-gpio-pulldown", + "d11-spi0-d0", "d11-gpio", "d11-gpio-pullup", "d11-gpio-pulldown", + "d12-spi0-d1", "d12-gpio", "d12-gpio-pullup", "d12-gpio-pulldown", + "d13-spi0-clk", "d13-gpio", "d13-gpio-pullup", "d13-gpio-pulldown", + "a0-gpio", "a0-gpio-pullup", "a0-gpio-pulldown", + "a1-gpio", "a1-gpio-pullup", "a1-gpio-pulldown", + "a2-gpio", "a2-gpio-pullup", "a2-gpio-pulldown", + "a3-gpio", "a3-gpio-pullup", "a3-gpio-pulldown", + "a4-gpio", "a4-gpio-pullup", "a4-gpio-pulldown", + "a5-gpio", "a5-gpio-pullup", "a5-gpio-pulldown"; + + pinctrl-0 = <&d0_uart0_rxd>; + pinctrl-1 = <&d0_uart0_rxd>; + pinctrl-2 = <&d0_gpio>; + pinctrl-3 = <&d0_gpio_pullup>; + pinctrl-4 = <&d0_gpio_pulldown>; + pinctrl-5 = <&d1_uart0_txd>; + pinctrl-6 = <&d1_gpio>; + pinctrl-7 = <&d1_gpio_pullup>; + pinctrl-8 = <&d1_gpio_pulldown>; + pinctrl-9 = <&d2_uart0_ctsn>; + pinctrl-10 = <&d2_gpio>; + pinctrl-11 = <&d2_gpio_pullup>; + pinctrl-12 = <&d2_gpio_pulldown>; + pinctrl-13 = <&d3_uart0_rtsn>; + pinctrl-14 = <&d3_gpio>; + pinctrl-15 = <&d3_gpio_pullup>; + pinctrl-16 = <&d3_gpio_pulldown>; + pinctrl-17 = <&d10_spi0_cs0>; + pinctrl-18 = <&d10_gpio>; + pinctrl-19 = <&d10_gpio_pullup>; + pinctrl-20 = <&d10_gpio_pulldown>; + pinctrl-21 = <&d11_spi0_d0>; + pinctrl-22 = <&d11_gpio>; + pinctrl-23 = <&d11_gpio_pullup>; + pinctrl-24 = <&d11_gpio_pulldown>; + pinctrl-25 = <&d12_spi0_d1>; + pinctrl-26 = <&d12_gpio>; + pinctrl-27 = <&d12_gpio_pullup>; + pinctrl-28 = <&d12_gpio_pulldown>; + pinctrl-29 = <&d13_spi0_clk>; + pinctrl-30 = <&d13_gpio>; + pinctrl-31 = <&d13_gpio_pullup>; + pinctrl-32 = <&d13_gpio_pulldown>; + pinctrl-33 = <&a0_gpio>; + pinctrl-34 = <&a0_gpio_pullup>; + pinctrl-35 = <&a0_gpio_pulldown>; + pinctrl-36 = <&a1_gpio>; + pinctrl-37 = <&a1_gpio_pullup>; + pinctrl-38 = <&a1_gpio_pulldown>; + pinctrl-39 = <&a2_gpio>; + pinctrl-40 = <&a2_gpio_pullup>; + pinctrl-41 = <&a2_gpio_pulldown>; + pinctrl-42 = <&a3_gpio>; + pinctrl-43 = <&a3_gpio_pullup>; + pinctrl-44 = <&a3_gpio_pulldown>; + pinctrl-45 = <&a4_gpio>; + pinctrl-46 = <&a4_gpio_pullup>; + pinctrl-47 = <&a4_gpio_pulldown>; + pinctrl-48 = <&a5_gpio>; + pinctrl-49 = <&a5_gpio_pullup>; + pinctrl-50 = <&a5_gpio_pulldown>; + + d0_uart0_rxd: d0-uart0-rxd-pins { + pinctrl-single,pins = < + /* (P4) MCU_UART0_RXD */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) + >; + }; + + d0_gpio: d0-gpio-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 7) + >; + }; + + d0_gpio_pullup: d0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLUP, 7) + >; + }; + + d0_gpio_pulldown: d0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P4) WKUP_GPIO0_29 */ + AM65X_WKUP_IOPAD(0x0044, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d1_uart0_txd: d1-uart0-txd-pins { + pinctrl-single,pins = < + /* (P5) MCU_UART0_TXD */ + AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) + >; + }; + + d1_gpio: d1-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pullup: d1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT, 7) + >; + }; + + d1_gpio_pulldown: d1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_30 */ + AM65X_WKUP_IOPAD(0x0048, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d2_uart0_ctsn: d2-uart0-ctsn-pins { + pinctrl-single,pins = < + /* (P1) MCU_UART0_CTSn */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) + >; + }; + + d2_gpio: d2-gpio-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pullup: d2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 7) + >; + }; + + d2_gpio_pulldown: d2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (P5) WKUP_GPIO0_31 */ + AM65X_WKUP_IOPAD(0x004C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d3_uart0_rtsn: d3-uart0-rtsn-pins { + pinctrl-single,pins = < + /* (N3) MCU_UART0_RTSn */ + AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) + >; + }; + + d3_gpio: d3-gpio-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pullup: d3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT, 7) + >; + }; + + d3_gpio_pulldown: d3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N3) WKUP_GPIO0_33 */ + AM65X_WKUP_IOPAD(0x0054, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d10_spi0_cs0: d10-spi0-cs0-pins { + pinctrl-single,pins = < + /* (Y4) MCU_SPI0_CS0 */ + AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0) + >; + }; + + d10_gpio: d10-gpio-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pullup: d10-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT, 7) + >; + }; + + d10_gpio_pulldown: d10-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y4) WKUP_GPIO0_51 */ + AM65X_WKUP_IOPAD(0x009c, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d11_spi0_d0: d11-spi0-d0-pins { + pinctrl-single,pins = < + /* (Y3) MCU_SPI0_D0 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0) + >; + }; + + d11_gpio: d11-gpio-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pullup: d11-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 7) + >; + }; + + d11_gpio_pulldown: d11-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y3) WKUP_GPIO0_49 */ + AM65X_WKUP_IOPAD(0x0094, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d12_spi0_d1: d12-spi0-d1-pins { + pinctrl-single,pins = < + /* (Y2) MCU_SPI0_D1 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0) + >; + }; + + d12_gpio: d12-gpio-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pullup: d12-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d12_gpio_pulldown: d12-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y2) WKUP_GPIO0_50 */ + AM65X_WKUP_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d13_spi0_clk: d13-spi0-clk-pins { + pinctrl-single,pins = < + /* (Y1) MCU_SPI0_CLK */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0) + >; + }; + + d13_gpio: d13-gpio-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pullup: d13-gpio-pullup-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 7) + >; + }; + + d13_gpio_pulldown: d13-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (Y1) WKUP_GPIO0_48 */ + AM65X_WKUP_IOPAD(0x0090, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a0_gpio: a0-gpio-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pullup: a0-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + a0_gpio_pulldown: a0-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L6) WKUP_GPIO0_45 */ + AM65X_WKUP_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a1_gpio: a1-gpio-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pullup: a1-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 7) + >; + }; + + a1_gpio_pulldown: a1-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M6) WKUP_GPIO0_44 */ + AM65X_WKUP_IOPAD(0x0080, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a2_gpio: a2-gpio-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pullup: a2-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT, 7) + >; + }; + + a2_gpio_pulldown: a2-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L5) WKUP_GPIO0_43 */ + AM65X_WKUP_IOPAD(0x007C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a3_gpio: a3-gpio-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pullup: a3-gpio-pullup-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT, 7) + >; + }; + + a3_gpio_pulldown: a3-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (M5) WKUP_GPIO0_39 */ + AM65X_WKUP_IOPAD(0x006C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a4_gpio: a4-gpio-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pullup: a4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT, 7) + >; + }; + + a4_gpio_pulldown: a4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (L2) WKUP_GPIO0_42 */ + AM65X_WKUP_IOPAD(0x0078, PIN_INPUT_PULLDOWN, 7) + >; + }; + + a5_gpio: a5-gpio-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT, 7) + >; + }; + + a5_gpio_pullup: a5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLUP, 7) + >; + }; + + a5_gpio_pulldown: a5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (N5) WKUP_GPIO0_35 */ + AM65X_WKUP_IOPAD(0x005C, PIN_INPUT_PULLDOWN, 7) + >; + }; + wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < /* (AC7) WKUP_I2C0_SCL */ @@ -136,23 +637,6 @@ >; }; - arduino_uart_pins_default: arduino-uart-default-pins { - pinctrl-single,pins = < - /* (P4) MCU_UART0_RXD */ - AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) - /* (P5) MCU_UART0_TXD */ - AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) - >; - }; - - arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-default-pins { - pinctrl-single,pins = < - /* (P1) WKUP_GPIO0_31 */ - AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7) - /* (N3) WKUP_GPIO0_33 */ - AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7) - >; - }; arduino_io_oe_pins_default: arduino-io-oe-default-pins { pinctrl-single,pins = < @@ -232,6 +716,220 @@ }; &main_pmx0 { + pinctrl-names = + "default", + "d4-ehrpwm0-a", "d4-gpio", "d4-gpio-pullup", "d4-gpio-pulldown", + "d5-ehrpwm1-a", "d5-gpio", "d5-gpio-pullup", "d5-gpio-pulldown", + "d6-ehrpwm2-a", "d6-gpio", "d6-gpio-pullup", "d6-gpio-pulldown", + "d7-ehrpwm3-a", "d7-gpio", "d7-gpio-pullup", "d7-gpio-pulldown", + "d8-ehrpwm4-a", "d8-gpio", "d8-gpio-pullup", "d8-gpio-pulldown", + "d9-ehrpwm5-a", "d9-gpio", "d9-gpio-pullup", "d9-gpio-pulldown"; + + pinctrl-0 = <&d4_ehrpwm0_a>; + pinctrl-1 = <&d4_ehrpwm0_a>; + pinctrl-2 = <&d4_gpio>; + pinctrl-3 = <&d4_gpio_pullup>; + pinctrl-4 = <&d4_gpio_pulldown>; + + pinctrl-5 = <&d5_ehrpwm1_a>; + pinctrl-6 = <&d5_gpio>; + pinctrl-7 = <&d5_gpio_pullup>; + pinctrl-8 = <&d5_gpio_pulldown>; + + pinctrl-9 = <&d6_ehrpwm2_a>; + pinctrl-10 = <&d6_gpio>; + pinctrl-11 = <&d6_gpio_pullup>; + pinctrl-12 = <&d6_gpio_pulldown>; + + pinctrl-13 = <&d7_ehrpwm3_a>; + pinctrl-14 = <&d7_gpio>; + pinctrl-15 = <&d7_gpio_pullup>; + pinctrl-16 = <&d7_gpio_pulldown>; + + pinctrl-17 = <&d8_ehrpwm4_a>; + pinctrl-18 = <&d8_gpio>; + pinctrl-19 = <&d8_gpio_pullup>; + pinctrl-20 = <&d8_gpio_pulldown>; + + pinctrl-21 = <&d9_ehrpwm5_a>; + pinctrl-22 = <&d9_gpio>; + pinctrl-23 = <&d9_gpio_pullup>; + pinctrl-24 = <&d9_gpio_pulldown>; + + d4_ehrpwm0_a: d4-ehrpwm0-a-pins { + pinctrl-single,pins = < + /* (AG18) EHRPWM0_A */ + AM65X_IOPAD(0x0084, PIN_OUTPUT, 5) + >; + }; + + d4_gpio: d4-gpio-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT, 7) + >; + }; + + d4_gpio_pullup: d4-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLUP, 7) + >; + }; + + d4_gpio_pulldown: d4-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG18) GPIO0_33 */ + AM65X_IOPAD(0x0084, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d5_ehrpwm1_a: d5-ehrpwm1-a-pins { + pinctrl-single,pins = < + /* (AF17) EHRPWM1_A */ + AM65X_IOPAD(0x008C, PIN_OUTPUT, 5) + >; + }; + + d5_gpio: d5-gpio-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT, 7) + >; + }; + + d5_gpio_pullup: d5-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLUP, 7) + >; + }; + + d5_gpio_pulldown: d5-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AF17) GPIO0_35 */ + AM65X_IOPAD(0x008C, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d6_ehrpwm2_a: d6-ehrpwm2-a-pins { + pinctrl-single,pins = < + /* (AH16) EHRPWM2_A */ + AM65X_IOPAD(0x0098, PIN_OUTPUT, 5) + >; + }; + + d6_gpio: d6-gpio-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT, 7) + >; + }; + + d6_gpio_pullup: d6-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLUP, 7) + >; + }; + + d6_gpio_pulldown: d6-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH16) GPIO0_38 */ + AM65X_IOPAD(0x0098, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d7_ehrpwm3_a: d7-ehrpwm3-a-pins { + pinctrl-single,pins = < + /* (AH15) EHRPWM3_A */ + AM65X_IOPAD(0x00AC, PIN_OUTPUT, 5) + >; + }; + + d7_gpio: d7-gpio-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT, 7) + >; + }; + + d7_gpio_pullup: d7-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLUP, 7) + >; + }; + + d7_gpio_pulldown: d7-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AH15) GPIO0_43 */ + AM65X_IOPAD(0x00AC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d8_ehrpwm4_a: d8-ehrpwm4-a-pins { + pinctrl-single,pins = < + /* (AG15) EHRPWM4_A */ + AM65X_IOPAD(0x00C0, PIN_OUTPUT, 5) + >; + }; + + d8_gpio: d8-gpio-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT, 7) + >; + }; + + d8_gpio_pullup: d8-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLUP, 7) + >; + }; + + d8_gpio_pulldown: d8-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AG15) GPIO0_48 */ + AM65X_IOPAD(0x00C0, PIN_INPUT_PULLDOWN, 7) + >; + }; + + d9_ehrpwm5_a: d9-ehrpwm5-a-pins { + pinctrl-single,pins = < + /* (AD15) EHRPWM5_A */ + AM65X_IOPAD(0x00CC, PIN_OUTPUT, 5) + >; + }; + + d9_gpio: d9-gpio-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT, 7) + >; + }; + + d9_gpio_pullup: d9-gpio-pullup-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLUP, 7) + >; + }; + + d9_gpio_pulldown: d9-gpio-pulldown-pins { + pinctrl-single,pins = < + /* (AD15) GPIO0_51 */ + AM65X_IOPAD(0x00CC, PIN_INPUT_PULLDOWN, 7) + >; + }; + + main_pcie_enable_pins_default: main-pcie-enable-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ + >; + }; + main_uart1_pins_default: main-uart1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */ @@ -273,17 +971,6 @@ >; }; - arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */ - AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */ - AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */ - AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */ - AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */ - AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */ - >; - }; - dss_vout1_pins_default: dss-vout1-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */ @@ -329,6 +1016,43 @@ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */ >; }; + + icssg0_mdio_pins_default: icssg0-mdio-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0294, PIN_INPUT, 0) /* (AE26) PRG0_MDIO0_MDIO */ + AM65X_IOPAD(0x0298, PIN_OUTPUT, 0) /* (AE28) PRG0_MDIO0_MDC */ + >; + }; + + icssg0_rgmii_pins_default: icssg0-rgmii-default-pins { + pinctrl-single,pins = < + AM65X_IOPAD(0x0244, PIN_INPUT, 2) /* (AB28) PRG0_PRU1_GPO0.PRG0_RGMII2_RD0 */ + AM65X_IOPAD(0x0248, PIN_INPUT, 2) /* (AC28) PRG0_PRU1_GPO1.PRG0_RGMII2_RD1 */ + AM65X_IOPAD(0x024c, PIN_INPUT, 2) /* (AC27) PRG0_PRU1_GPO2.PRG0_RGMII2_RD2 */ + AM65X_IOPAD(0x0250, PIN_INPUT, 2) /* (AB26) PRG0_PRU1_GPO3.PRG0_RGMII2_RD3 */ + AM65X_IOPAD(0x0274, PIN_OUTPUT, 2) /* (AC25) PRG0_PRU1_GPO12.PRG0_RGMII2_TD0 */ + AM65X_IOPAD(0x0278, PIN_OUTPUT, 2) /* (AD25) PRG0_PRU1_GPO13.PRG0_RGMII2_TD1 */ + AM65X_IOPAD(0x027c, PIN_OUTPUT, 2) /* (AD24) PRG0_PRU1_GPO14.PRG0_RGMII2_TD2 */ + AM65X_IOPAD(0x0280, PIN_OUTPUT, 2) /* (AE27) PRG0_PRU1_GPO15.PRG0_RGMII2_TD3 */ + AM65X_IOPAD(0x0284, PIN_INPUT, 2) /* (AC24) PRG0_PRU1_GPO16.PRG0_RGMII2_TXC */ + AM65X_IOPAD(0x0270, PIN_OUTPUT, 2) /* (AB24) PRG0_PRU1_GPO11.PRG0_RGMII2_TX_CTL */ + AM65X_IOPAD(0x025c, PIN_INPUT, 2) /* (AB27) PRG0_PRU1_GPO6.PRG0_RGMII2_RXC */ + AM65X_IOPAD(0x0254, PIN_INPUT, 2) /* (AA25) PRG0_PRU1_GPO4.PRG0_RGMII2_RX_CTL */ + + AM65X_IOPAD(0x01f4, PIN_INPUT, 2) /* (V24) PRG0_PRU0_GPO0.PRG0_RGMII1_RD0 */ + AM65X_IOPAD(0x01f8, PIN_INPUT, 2) /* (W25) PRG0_PRU0_GPO1.PRG0_RGMII1_RD1 */ + AM65X_IOPAD(0x01fc, PIN_INPUT, 2) /* (W24) PRG0_PRU0_GPO2.PRG0_RGMII1_RD2 */ + AM65X_IOPAD(0x0200, PIN_INPUT, 2) /* (AA27) PRG0_PRU0_GPO3.PRG0_RGMII1_RD3 */ + AM65X_IOPAD(0x0224, PIN_OUTPUT, 2) /* (AD27) PRG0_PRU0_GPO12.PRG0_RGMII1_TD0 */ + AM65X_IOPAD(0x0228, PIN_OUTPUT, 2) /* (AC26) PRG0_PRU0_GPO13.PRG0_RGMII1_TD1 */ + AM65X_IOPAD(0x022c, PIN_OUTPUT, 2) /* (AD26) PRG0_PRU0_GPO14.PRG0_RGMII1_TD2 */ + AM65X_IOPAD(0x0230, PIN_OUTPUT, 2) /* (AA24) PRG0_PRU0_GPO15.PRG0_RGMII1_TD3 */ + AM65X_IOPAD(0x0234, PIN_INPUT, 2) /* (AD28) PRG0_PRU0_GPO16.PRG0_RGMII1_TXC */ + AM65X_IOPAD(0x0220, PIN_OUTPUT, 2) /* (AB25) PRG0_PRU0_GPO11.PRG0_RGMII1_TX_CTL */ + AM65X_IOPAD(0x020c, PIN_INPUT, 2) /* (Y25) PRG0_PRU0_GPO6.PRG0_RGMII1_RXC */ + AM65X_IOPAD(0x0204, PIN_INPUT, 2) /* (Y24) PRG0_PRU0_GPO4.PRG0_RGMII1_RX_CTL */ + >; + }; }; &main_pmx1 { @@ -345,12 +1069,6 @@ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */ >; }; - - ecap0_pins_default: ecap0-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */ - >; - }; }; &wkup_uart0 { @@ -366,13 +1084,9 @@ &mcu_uart0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&arduino_uart_pins_default>; }; &main_gpio0 { - pinctrl-names = "default"; - pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>; gpio-line-names = "main_gpio0-base", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", @@ -382,10 +1096,14 @@ "", "IO9"; }; +&main_gpio1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_pcie_enable_pins_default>; +}; + &wkup_gpio0 { pinctrl-names = "default"; pinctrl-0 = - <&arduino_io_d2_to_d3_pins_default>, <&arduino_i2c_aio_switch_pins_default>, <&arduino_io_oe_pins_default>, <&push_button_pins_default>, @@ -547,13 +1265,8 @@ status = "disabled"; }; -&ecap0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&ecap0_pins_default>; -}; - &sdhci1 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; @@ -574,9 +1287,6 @@ &mcu_spi0 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_spi0_pins_default>; - #address-cells = <1>; #size-cells = <0>; ti,pindir-d0-out-d1-in; @@ -716,3 +1426,21 @@ <&mcu_r5fss0_core1_memory_region>; mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>; }; + +&icssg0_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&icssg0_mdio_pins_default>; + + icssg0_eth0_phy: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + + icssg0_eth1_phy: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 5ebb87f467de..fcea54465636 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -449,6 +449,7 @@ ti,otap-del-sel-hs400 = <0x0>; ti,trm-icp = <0x8>; dma-coherent; + status = "disabled"; }; sdhci1: mmc@4fa0000 { @@ -471,6 +472,7 @@ ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; + status = "disabled"; }; scm_conf: scm-conf@100000 { @@ -498,8 +500,8 @@ }; dss_oldi_io_ctrl: dss-oldi-io-ctrl@41e0 { - compatible = "syscon"; - reg = <0x000041e0 0x14>; + compatible = "ti,am654-dss-oldi-io-ctrl", "syscon"; + reg = <0x41e0 0x14>; }; ehrpwm_tbclk: clock-controller@4140 { @@ -790,8 +792,12 @@ compatible = "ti,am654-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x10000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; @@ -1034,7 +1040,7 @@ assigned-clocks = <&k3_clks 67 2>; assigned-clock-parents = <&k3_clks 67 5>; - interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; dma-coherent; diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi index edd5cfbec40e..ecd7356f3315 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi @@ -214,8 +214,12 @@ compatible = "ti,am654-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&inta_main_udmass>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi index fd2b998ebddc..f037b36243ce 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi @@ -34,9 +34,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x43000014 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; wkup_pmx0: pinctrl@4301c000 { diff --git a/arch/arm64/boot/dts/ti/k3-am652.dtsi b/arch/arm64/boot/dts/ti/k3-am652.dtsi new file mode 100644 index 000000000000..0f22e00faa90 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-am652.dtsi @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for AM65 SoC family in Dual core configuration + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +#include "k3-am65.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + cache-unified; + }; + + thermal_zones: thermal-zones { + #include "k3-am654-industrial-thermal.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi index 5ab434c02ab6..1d6cddb11991 100644 --- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi @@ -9,6 +9,7 @@ * Common bits of the IOT2050 Basic variant, PG1 and PG2 */ +#include "k3-am652.dtsi" #include "k3-am65-iot2050-common.dtsi" / { @@ -17,21 +18,6 @@ /* 1G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x40000000>; }; - - cpus { - cpu-map { - /delete-node/ cluster1; - }; - /delete-node/ cpu@100; - /delete-node/ cpu@101; - }; - - /delete-node/ l2-cache1; -}; - -/* eMMC */ -&sdhci0 { - status = "disabled"; }; &main_pmx0 { diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index 1637ec5ab5ed..822c288d2797 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -449,6 +449,7 @@ }; &sdhci0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; bus-width = <8>; @@ -463,6 +464,7 @@ * disable sdhci1 */ &sdhci1 { + status = "okay"; vmmc-supply = <&vdd_mmc1_sd>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi index be55494b1f3f..3864ec54e371 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -11,6 +11,7 @@ /dts-v1/; +#include "k3-am654.dtsi" #include "k3-am65-iot2050-common.dtsi" / { @@ -43,6 +44,7 @@ /* eMMC */ &sdhci0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; bus-width = <8>; diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts index 774eb14ac907..bd6f2e696e94 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts @@ -27,12 +27,6 @@ }; &main_pmx0 { - main_m2_enable_pins_default: main-m2-enable-default-pins { - pinctrl-single,pins = < - AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7) /* (AH13) GPIO1_17 */ - >; - }; - main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins { pinctrl-single,pins = < AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7) /* (AG13) GPIO1_15 */ @@ -66,15 +60,13 @@ &main_gpio0 { pinctrl-names = "default"; - pinctrl-0 = - <&main_m2_pcie_mux_control>, - <&arduino_io_d4_to_d9_pins_default>; + pinctrl-0 = <&main_m2_pcie_mux_control>; }; &main_gpio1 { pinctrl-names = "default"; pinctrl-0 = - <&main_m2_enable_pins_default>, + <&main_pcie_enable_pins_default>, <&main_pmx0_m2_config_pins_default>, <&main_pmx1_m2_config_pins_default>, <&cp2102n_reset_pin_default>; diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts index 1e1a82f9d2b8..d0cfdeac21fb 100644 --- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts @@ -31,6 +31,7 @@ can1 = &mcu_mcan1; can2 = &main_mcan6; can3 = &main_mcan7; + ethernet0 = &cpsw_port1; }; vusb_main: regulator-vusb-main5v0 { diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 9868c7049bfb..8da591579868 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -433,6 +433,13 @@ &wkup_pmx2 { bootph-all; + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (AA37) MCU_ADC1_AIN4.WKUP_GPIO0_83 */ + J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 7) + >; + }; + wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < @@ -631,6 +638,93 @@ compatible = "atmel,24c512"; reg = <0x51>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vds_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &wkup_gpio0 { @@ -671,7 +765,7 @@ reg = <0x21>; gpio-controller; #gpio-cells = <2>; - gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN", + gpio-line-names = "BOARDID_EEPROM_WP", "CAN_STB", "GPIO_uSD_PWR_EN", "IO_EXP_MCU_RGMII_RST#", "IO_EXP_PCIe0_4L_PERST#", "IO_EXP_PCIe1_M.2_RTSz", "IO_EXP_PCIe3_M.2_RTSz", "PM_INA_BUS_EN", "ENET1_EXP_PWRDN", "EXP1_ENET_RSTz", diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 264913f83287..da67bf8fe703 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -281,8 +281,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x100000>, - <0x00 0x35000000 0x00 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x100000>, + <0x00 0x30b00000 0x00 0x4000>, + <0x00 0x30c00000 0x00 0x4000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; @@ -647,6 +651,7 @@ ti,otap-del-sel-hs400 = <0x5>; ti,itap-del-sel-legacy = <0x10>; ti,itap-del-sel-mmc-hs = <0xa>; + ti,itap-del-sel-ddr52 = <0x3>; ti,strobe-sel = <0x77>; ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 3fc588b848c6..60b26374ae0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -178,9 +178,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x00 0x43000014 0x00 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */ @@ -346,8 +353,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi index 5a300d4c8ba0..ea47f10d393a 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi @@ -127,6 +127,14 @@ }; }; +&wkup_pmx3 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x01c, PIN_INPUT, 7) /* (E18) WKUP_GPIO0_84 */ + >; + }; +}; + &main_pmx0 { main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < @@ -264,6 +272,151 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659414: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka1: buck1 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka2: buck2 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_phyio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd1_lpddr4_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdd_wk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + lp876441: pmic@4c { + compatible = "ti,lp8764-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <84 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + + regulators: regulators { + buckb1: buck1 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + bootph-pre-ram; + }; + + buckb2: buck2 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb3: buck3 { + regulator-name = "vdd_core_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ospi0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso new file mode 100644 index 000000000000..0c82a13b65a4 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721e-evm-pcie0-ep.dtso @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for enabling PCIE0 instance in Endpoint Configuration with the + * J7 common processor board. + * + * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-pinctrl.h" + +/* + * Since Root Complex and Endpoint modes are mutually exclusive + * disable Root Complex mode. + */ +&pcie0_rc { + status = "disabled"; +}; + +&cbass_main { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic500>; + + pcie0_ep: pcie-ep@2900000 { + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; + max-link-speed = <3>; + num-lanes = <1>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi index 746b9f8b1c64..2569b4c08ffb 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi @@ -382,8 +382,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x100000>, - <0x0 0x35000000 0x0 0x100000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x100000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x10000>, + <0x0 0x30d00000 0x0 0x8000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi index f7ab7719fc07..a74912d9e4da 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi @@ -48,9 +48,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x0 0x43000014 0x0 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; wkup_pmx0: pinctrl@4301c000 { @@ -468,8 +475,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts index 42fe8eee9ec8..188dfe291a32 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts @@ -459,6 +459,12 @@ }; &wkup_pmx0 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0cc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ + >; + }; + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x84, PIN_INPUT, 0) /* (B24) MCU_RGMII1_RD0 */ @@ -560,6 +566,151 @@ compatible = "atmel,24c512"; reg = <0x51>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck123-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka123: buck123 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka4: buck4 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_phyio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd1_lpddr4_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659411: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_sd_dv"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_usb_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &mcu_uart0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi index 7f0686c2ce37..a75611eec791 100644 --- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi @@ -152,6 +152,12 @@ >; }; + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0d4, PIN_INPUT, 7) /* (G26) WKUP_GPIO0_9 */ + >; + }; + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ @@ -199,6 +205,160 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka3: buck3 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_phyio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd1_lpddr4_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659411: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_sd_dv"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_usb_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &ospi0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso new file mode 100644 index 000000000000..43568eb67d93 --- /dev/null +++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0 +/** + * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the + * J7 common processor board. + * + * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM + * + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/dts-v1/; +/plugin/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/soc/ti,sci_pm_domain.h> + +#include "k3-pinctrl.h" + +/* + * Since Root Complex and Endpoint modes are mutually exclusive + * disable Root Complex mode. + */ +&pcie1_rc { + status = "disabled"; +}; + +&cbass_main { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic500>; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>; + ti,syscon-pcie-ctrl = <&scm_conf 0x074>; + max-link-speed = <3>; + num-lanes = <1>; + power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 276 41>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi index b03731b53a26..ea7f2b2ab165 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi @@ -766,6 +766,7 @@ ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; ti,itap-del-sel-sdr25 = <0x0>; + ti,itap-del-sel-ddr50 = <0x2>; ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; @@ -1086,8 +1087,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x0 0x31150000 0x0 0x100>, <0x0 0x34000000 0x0 0x80000>, - <0x0 0x35000000 0x0 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x35000000 0x0 0x200000>, + <0x0 0x30b00000 0x0 0x20000>, + <0x0 0x30c00000 0x0 0x8000>, + <0x0 0x30d00000 0x0 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi index 7254f3bd3634..80aa33c58a45 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi @@ -34,9 +34,16 @@ }; }; - chipid@43000014 { - compatible = "ti,am654-chipid"; - reg = <0x00 0x43000014 0x00 0x4>; + wkup_conf: bus@43000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; secure_proxy_sa3: mailbox@43600000 { @@ -471,8 +478,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x0 0x285c0000 0x0 0x100>, <0x0 0x2a800000 0x0 0x40000>, - <0x0 0x2aa00000 0x0 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x0 0x2aa00000 0x0 0x40000>, + <0x0 0x284a0000 0x0 0x4000>, + <0x0 0x284c0000 0x0 0x4000>, + <0x0 0x28400000 0x0 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi index dcad372620b1..da3237b23b63 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi @@ -172,6 +172,15 @@ }; }; +&wkup_pmx1 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) + >; + }; +}; + &wkup_pmx2 { wkup_i2c0_pins_default: wkup-i2c0-default-pins { pinctrl-single,pins = < @@ -208,6 +217,190 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659411: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck1234-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka1234: buck1234 { + regulator-name = "vdd_cpu_avs"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuwk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcu_gpioret_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + tps659414: pmic@4c { + compatible = "ti,tps6594-q1"; + reg = <0x4c>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1-supply = <&vsys_3v3>; + buck2-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + buckb1: buck1 { + regulator-name = "vdd_io_1v8_reg"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buckb2: buck2 { + regulator-name = "vdd_fpd_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb3: buck3 { + regulator-name = "vdd_phy_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb4: buck4 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buckb5: buck5 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob1: ldo1 { + regulator-name = "vdd_wk_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob2: ldo2 { + regulator-name = "vdd_gpioret_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob3: ldo3 { + regulator-name = "vda_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldob4: ldo4 { + regulator-name = "vda_pll_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + lp876411: pmic@58 { + compatible = "ti,lp8764-q1"; + reg = <0x58>; + system-power-controller; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck1234-supply = <&vsys_3v3>; + + regulators { + buckc1234: buck1234 { + regulator-name = "vdd_core_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &main_i2c0 { diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index f1f4c8634ab6..f34b92acc56d 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -273,6 +273,10 @@ }; }; +&wkup_gpio0 { + status = "okay"; +}; + &main_pmx0 { bootph-all; main_uart8_pins_default: main-uart8-default-pins { @@ -407,6 +411,17 @@ }; }; +&wkup_pmx1 { + status = "okay"; + + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + /* (G33) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + J784S4_WKUP_IOPAD(0x028, PIN_INPUT, 7) + >; + }; +}; + &wkup_pmx0 { bootph-all; mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { @@ -471,6 +486,93 @@ compatible = "atmel,24c256"; reg = <0x50>; }; + + tps659413: pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + ti,primary-pmic; + buck12-supply = <&vsys_3v3>; + buck3-supply = <&vsys_3v3>; + buck4-supply = <&vsys_3v3>; + buck5-supply = <&vsys_3v3>; + ldo1-supply = <&vsys_3v3>; + ldo2-supply = <&vsys_3v3>; + ldo3-supply = <&vsys_3v3>; + ldo4-supply = <&vsys_3v3>; + + regulators { + bucka12: buck12 { + regulator-name = "vdd_ddr_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "vdd_ram_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "vdd_io_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "vdd_mcu_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "vdd_mcuio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "vdd_mcuio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "vds_dll_0v8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "vda_mcu_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; }; &mcu_uart0 { diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi index d89bcddcfe3d..f2b720ed1e4f 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi @@ -712,6 +712,7 @@ ti,itap-del-sel-sd-hs = <0x0>; ti,itap-del-sel-sdr12 = <0x0>; ti,itap-del-sel-sdr25 = <0x0>; + ti,itap-del-sel-ddr50 = <0x2>; ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; @@ -1188,8 +1189,12 @@ compatible = "ti,j721e-navss-main-udmap"; reg = <0x00 0x31150000 0x00 0x100>, <0x00 0x34000000 0x00 0x80000>, - <0x00 0x35000000 0x00 0x200000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x35000000 0x00 0x200000>, + <0x00 0x30b00000 0x00 0x20000>, + <0x00 0x30c00000 0x00 0x8000>, + <0x00 0x30d00000 0x00 0x4000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi index adb5ea6b9732..3902a921d7e5 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi @@ -38,10 +38,18 @@ }; }; - chipid@43000014 { + wkup_conf: bus@43000000 { bootph-all; - compatible = "ti,am654-chipid"; - reg = <0x00 0x43000014 0x00 0x4>; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x43000000 0x20000>; + + chipid: chipid@14 { + bootph-all; + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; secure_proxy_sa3: mailbox@43600000 { @@ -478,8 +486,12 @@ compatible = "ti,j721e-navss-mcu-udmap"; reg = <0x00 0x285c0000 0x00 0x100>, <0x00 0x2a800000 0x00 0x40000>, - <0x00 0x2aa00000 0x00 0x40000>; - reg-names = "gcfg", "rchanrt", "tchanrt"; + <0x00 0x2aa00000 0x00 0x40000>, + <0x00 0x284a0000 0x00 0x4000>, + <0x00 0x284c0000 0x00 0x4000>, + <0x00 0x28400000 0x00 0x2000>; + reg-names = "gcfg", "rchanrt", "tchanrt", + "tchan", "rchan", "rflow"; msi-parent = <&main_udmass_inta>; #dma-cells = <1>; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index 5e40c0b4fa0a..1068b0fa8e98 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -22,11 +22,10 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA.dtb zynqmp-sm-k26-revA-sck-kv-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revA.dtb zynqmp-sm-k26-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kv-g-revB.dtb zynqmp-smk-k26-revA-sck-kv-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revA.dtbo +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo - -zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo -zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo -zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo -zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso index ae1b9b2bdbee..92f4190d564d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso @@ -21,57 +21,57 @@ /dts-v1/; /plugin/; -&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - /* u14 - 0x40 - ina260 */ - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ -}; - -&amba { - si5332_0: si5332_0 { /* u17 */ +&{/} { + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <125000000>; }; - si5332_1: si5332_1 { /* u17 */ + si5332_1: si5332-1 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - si5332_2: si5332_2 { /* u17 */ + si5332_2: si5332-2 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; }; - si5332_3: si5332_3 { /* u17 */ + si5332_3: si5332-3 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; - si5332_4: si5332_4 { /* u17 */ + si5332_4: si5332-4 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5332_5: si5332_5 { /* u17 */ + si5332_5: si5332-5 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; }; +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + /* u14 - 0x40 - ina260 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + /* DP/USB 3.0 and SATA */ &psgtr { status = "okay"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso index b59e48be6465..f88b71f5b07a 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso @@ -16,58 +16,58 @@ /dts-v1/; /plugin/; -&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default", "gpio"; - pinctrl-0 = <&pinctrl_i2c1_default>; - pinctrl-1 = <&pinctrl_i2c1_gpio>; - scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - - /* u14 - 0x40 - ina260 */ - /* u43 - 0x2d - usb5744 */ - /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ -}; - -&amba { - si5332_0: si5332_0 { /* u17 */ +&{/} { + si5332_0: si5332-0 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <125000000>; }; - si5332_1: si5332_1 { /* u17 */ + si5332_1: si5332-1 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - si5332_2: si5332_2 { /* u17 */ + si5332_2: si5332-2 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; }; - si5332_3: si5332_3 { /* u17 */ + si5332_3: si5332-3 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; - si5332_4: si5332_4 { /* u17 */ + si5332_4: si5332-4 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5332_5: si5332_5 { /* u17 */ + si5332_5: si5332-5 { /* u17 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; }; }; +&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1_default>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + + /* u14 - 0x40 - ina260 */ + /* u43 - 0x2d - usb5744 */ + /* u27 - 0xe0 - STDP4320 DP/HDMI splitter */ +}; + /* DP/USB 3.0 */ &psgtr { status = "okay"; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts index c4774a42d5fc..51622896b1b1 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts @@ -131,9 +131,7 @@ &qspi { /* MIO 0-5 - U143 */ status = "okay"; spi_flash: flash@0 { /* MT25QU512A */ - compatible = "mt25qu512a", "jedec,spi-nor"; /* 64MB */ - #address-cells = <1>; - #size-cells = <1>; + compatible = "jedec,spi-nor"; /* 64MB */ reg = <0>; spi-tx-bus-width = <4>; spi-rx-bus-width = <4>; @@ -222,9 +220,9 @@ label = "Secure OS Storage"; reg = <0x2280000 0x20000>; /* 128KB */ }; - partition@22A0000 { + partition@22a0000 { label = "User"; - reg = <0x22A0000 0x1d60000>; /* 29.375 MB */ + reg = <0x22a0000 0x1d60000>; /* 29.375 MB */ }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts index e821d55d8d5a..73491626e01e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -98,8 +98,12 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem3_default>; - phy0: ethernet-phy@0 { - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts index b59e11316b4b..f767708fb50d 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -91,12 +91,16 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem2_default>; - phy0: ethernet-phy@5 { - reg = <5>; - ti,rx-internal-delay = <0x8>; - ti,tx-internal-delay = <0xa>; - ti,fifo-depth = <0x1>; - ti,dp83867-rxctrl-strap-quirk; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + ti,dp83867-rxctrl-strap-quirk; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts index 38b0a312171b..f553b317e6b2 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -88,8 +88,12 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: ethernet-phy@0 { /* VSC8211 */ - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { /* VSC8211 */ + reg = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts index 6636e76545a5..6ec1d9813973 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -116,17 +116,21 @@ status = "okay"; phy-mode = "rgmii-id"; phy-handle = <ðernet_phy0>; - ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ - reg = <0>; - }; - ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ - reg = <7>; - }; - ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ - reg = <3>; - }; - ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ - reg = <8>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ + reg = <0>; + }; + ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ + reg = <7>; + }; + ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ + reg = <3>; + }; + ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ + reg = <8>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts index 0d2ea9c09a0a..b1857e17ab7e 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -77,8 +77,12 @@ phy-mode = "rgmii-id"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gem1_default>; - phy0: ethernet-phy@0 { - reg = <0>; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts index d0091d3cb764..52f998c22538 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -123,13 +123,13 @@ io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; }; - si5335_0: si5335_0 { /* clk0_usb - u23 */ + si5335_0: si5335-0 { /* clk0_usb - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <26000000>; }; - si5335_1: si5335_1 { /* clk1_dp - u23 */ + si5335_1: si5335-1 { /* clk1_dp - u23 */ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <27000000>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index b61fc99cd911..eaba466804bc 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -129,7 +129,7 @@ }; }; - zynqmp_ipi: zynqmp_ipi { + zynqmp_ipi: zynqmp-ipi { bootph-all; compatible = "xlnx,zynqmp-ipi-mailbox"; interrupt-parent = <&gic>; @@ -141,6 +141,7 @@ ipi_mailbox_pmu1: mailbox@ff9905c0 { bootph-all; + compatible = "xlnx,zynqmp-ipi-dest-mailbox"; reg = <0x0 0xff9905c0 0x0 0x20>, <0x0 0xff9905e0 0x0 0x20>, <0x0 0xff990e80 0x0 0x20>, @@ -194,12 +195,12 @@ mbox-names = "tx", "rx"; }; - nvmem_firmware { + nvmem-firmware { compatible = "xlnx,zynqmp-nvmem-fw"; #address-cells = <1>; #size-cells = <1>; - soc_revision: soc_revision@0 { + soc_revision: soc-revision@0 { reg = <0x0 0x4>; }; }; @@ -584,8 +585,6 @@ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0b0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x874>; power-domains = <&zynqmp_firmware PD_ETH_0>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>; @@ -600,8 +599,6 @@ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0c0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x875>; power-domains = <&zynqmp_firmware PD_ETH_1>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; @@ -616,8 +613,6 @@ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0d0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x876>; power-domains = <&zynqmp_firmware PD_ETH_2>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>; @@ -632,8 +627,6 @@ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; reg = <0x0 0xff0e0000 0x0 0x1000>; clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; - #address-cells = <1>; - #size-cells = <0>; iommus = <&smmu 0x877>; power-domains = <&zynqmp_firmware PD_ETH_3>; resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index dce96f27cc89..222a39d90f85 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -192,6 +192,27 @@ status = "okay"; }; +&syscontroller_qspi { + /* + * The flash *is* there, but Icicle kits that have engineering sample + * silicon (write?) access to this flash to non-functional. The system + * controller itself can actually access it, but the MSS cannot write + * an image there. Instantiating a coreQSPI in the fabric & connecting + * it to the flash instead should work though. Pre-production or later + * silicon does not have this issue. + */ + status = "disabled"; + + sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <1>; + reg = <0>; + }; +}; + &usb { status = "okay"; dr_mode = "host"; diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi index 266489d43912..59fd2d4ea523 100644 --- a/arch/riscv/boot/dts/microchip/mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi @@ -194,6 +194,12 @@ mboxes = <&mbox 0>; }; + scbclk: mssclkclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <80000000>; + }; + soc { #address-cells = <2>; #size-cells = <2>; @@ -524,5 +530,16 @@ #mbox-cells = <1>; status = "disabled"; }; + + syscontroller_qspi: spi@37020100 { + compatible = "microchip,mpfs-qspi", "microchip,coreqspi-rtl-v2"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x37020100 0x0 0x100>; + interrupt-parent = <&plic>; + interrupts = <110>; + clocks = <&scbclk>; + status = "disabled"; + }; }; }; diff --git a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi index b0796015e36b..a92cfcfc021b 100644 --- a/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi +++ b/arch/riscv/boot/dts/renesas/r9a07g043f.dtsi @@ -24,6 +24,10 @@ reg = <0x0>; status = "okay"; riscv,isa = "rv64imafdc"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", + "zicntr", "zicsr", "zifencei", + "zihpm"; mmu-type = "riscv,sv39"; i-cache-size = <0x8000>; i-cache-line-size = <0x40>; diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile index 3fb65512c631..57ad82a61ea6 100644 --- a/arch/riscv/boot/dts/sophgo/Makefile +++ b/arch/riscv/boot/dts/sophgo/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb +dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi index aec6401a467b..165e9e320a8c 100644 --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi @@ -3,120 +3,16 @@ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> */ -#include <dt-bindings/interrupt-controller/irq.h> +#include "cv18xx.dtsi" / { compatible = "sophgo,cv1800b"; - #address-cells = <1>; - #size-cells = <1>; - - cpus: cpus { - #address-cells = <1>; - #size-cells = <0>; - timebase-frequency = <25000000>; - - cpu0: cpu@0 { - compatible = "thead,c906", "riscv"; - device_type = "cpu"; - reg = <0>; - d-cache-block-size = <64>; - d-cache-sets = <512>; - d-cache-size = <65536>; - i-cache-block-size = <64>; - i-cache-sets = <128>; - i-cache-size = <32768>; - mmu-type = "riscv,sv39"; - riscv,isa = "rv64imafdc"; - riscv,isa-base = "rv64i"; - riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", - "zifencei", "zihpm"; - - cpu0_intc: interrupt-controller { - compatible = "riscv,cpu-intc"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - }; - - osc: oscillator { - compatible = "fixed-clock"; - clock-output-names = "osc_25m"; - #clock-cells = <0>; - }; - - soc { - compatible = "simple-bus"; - interrupt-parent = <&plic>; - #address-cells = <1>; - #size-cells = <1>; - dma-noncoherent; - ranges; - - uart0: serial@4140000 { - compatible = "snps,dw-apb-uart"; - reg = <0x04140000 0x100>; - interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart1: serial@4150000 { - compatible = "snps,dw-apb-uart"; - reg = <0x04150000 0x100>; - interrupts = <45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart2: serial@4160000 { - compatible = "snps,dw-apb-uart"; - reg = <0x04160000 0x100>; - interrupts = <46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart3: serial@4170000 { - compatible = "snps,dw-apb-uart"; - reg = <0x04170000 0x100>; - interrupts = <47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; - - uart4: serial@41c0000 { - compatible = "snps,dw-apb-uart"; - reg = <0x041c0000 0x100>; - interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc>; - reg-shift = <2>; - reg-io-width = <4>; - status = "disabled"; - }; +}; - plic: interrupt-controller@70000000 { - compatible = "sophgo,cv1800b-plic", "thead,c900-plic"; - reg = <0x70000000 0x4000000>; - interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - riscv,ndev = <101>; - }; +&plic { + compatible = "sophgo,cv1800b-plic", "thead,c900-plic"; +}; - clint: timer@74000000 { - compatible = "sophgo,cv1800b-clint", "thead,c900-clint"; - reg = <0x74000000 0x10000>; - interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>; - }; - }; +&clint { + compatible = "sophgo,cv1800b-clint", "thead,c900-clint"; }; diff --git a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts new file mode 100644 index 000000000000..aa361f3a86bb --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com> + */ + +/dts-v1/; + +#include "cv1812h.dtsi" + +/ { + model = "Huashan Pi"; + compatible = "sophgo,huashan-pi", "sophgo,cv1812h"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + coprocessor_rtos: region@8fe00000 { + reg = <0x8fe00000 0x200000>; + no-map; + }; + }; +}; + +&osc { + clock-frequency = <25000000>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv1812h.dtsi b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi new file mode 100644 index 000000000000..3e7a942f5c1a --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/cv1812h.dtsi @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include "cv18xx.dtsi" + +/ { + compatible = "sophgo,cv1812h"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; +}; + +&plic { + compatible = "sophgo,cv1812h-plic", "thead,c900-plic"; +}; + +&clint { + compatible = "sophgo,cv1812h-clint", "thead,c900-clint"; +}; diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi new file mode 100644 index 000000000000..2d6f4a4b1e58 --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com> + */ + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus: cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <25000000>; + + cpu0: cpu@0 { + compatible = "thead,c906", "riscv"; + device_type = "cpu"; + reg = <0>; + d-cache-block-size = <64>; + d-cache-sets = <512>; + d-cache-size = <65536>; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <32768>; + mmu-type = "riscv,sv39"; + riscv,isa = "rv64imafdc"; + riscv,isa-base = "rv64i"; + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", + "zifencei", "zihpm"; + + cpu0_intc: interrupt-controller { + compatible = "riscv,cpu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + osc: oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc_25m"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&plic>; + #address-cells = <1>; + #size-cells = <1>; + dma-noncoherent; + ranges; + + gpio0: gpio@3020000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <60 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@3021000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3021000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <61 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio2: gpio@3022000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3022000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio3: gpio@3023000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3023000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + uart0: serial@4140000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04140000 0x100>; + interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@4150000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04150000 0x100>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@4160000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04160000 0x100>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@4170000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04170000 0x100>; + interrupts = <47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart4: serial@41c0000 { + compatible = "snps,dw-apb-uart"; + reg = <0x041c0000 0x100>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + plic: interrupt-controller@70000000 { + reg = <0x70000000 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + riscv,ndev = <101>; + }; + + clint: timer@74000000 { + reg = <0x74000000 0x10000>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>; + }; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi index b93ce351a90f..42fb61c36068 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi @@ -12,6 +12,8 @@ / { aliases { + mmc0 = &sdio0; + mmc1 = &sdio1; serial0 = &uart3; }; @@ -39,6 +41,35 @@ label = "ack"; }; }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dma-reserved@fa000000 { + reg = <0x0 0xfa000000 0x0 0x1000000>; + no-map; + }; + + linux,dma@107a000000 { + compatible = "shared-dma-pool"; + reg = <0x10 0x7a000000 0x0 0x1000000>; + no-map; + linux,dma-default; + }; + }; + + soc { + dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>, + <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>, + <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; }; &gpio { @@ -84,6 +115,78 @@ }; }; + sdio0_pins: sdio0-0 { + clk-pins { + pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT, + GPO_ENABLE, GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + sdio-pins { + pinmux = <GPIOMUX(55, GPO_LOW, GPO_DISABLE, + GPI_SDIO0_PAD_CARD_DETECT_N)>, + <GPIOMUX(53, + GPO_SDIO0_PAD_CCMD_OUT, + GPO_SDIO0_PAD_CCMD_OEN, + GPI_SDIO0_PAD_CCMD_IN)>, + <GPIOMUX(49, + GPO_SDIO0_PAD_CDATA_OUT_BIT0, + GPO_SDIO0_PAD_CDATA_OEN_BIT0, + GPI_SDIO0_PAD_CDATA_IN_BIT0)>, + <GPIOMUX(50, + GPO_SDIO0_PAD_CDATA_OUT_BIT1, + GPO_SDIO0_PAD_CDATA_OEN_BIT1, + GPI_SDIO0_PAD_CDATA_IN_BIT1)>, + <GPIOMUX(51, + GPO_SDIO0_PAD_CDATA_OUT_BIT2, + GPO_SDIO0_PAD_CDATA_OEN_BIT2, + GPI_SDIO0_PAD_CDATA_IN_BIT2)>, + <GPIOMUX(52, + GPO_SDIO0_PAD_CDATA_OUT_BIT3, + GPO_SDIO0_PAD_CDATA_OEN_BIT3, + GPI_SDIO0_PAD_CDATA_IN_BIT3)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + + sdio1_pins: sdio1-0 { + clk-pins { + pinmux = <GPIOMUX(33, GPO_SDIO1_PAD_CCLK_OUT, + GPO_ENABLE, GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + sdio-pins { + pinmux = <GPIOMUX(29, + GPO_SDIO1_PAD_CCMD_OUT, + GPO_SDIO1_PAD_CCMD_OEN, + GPI_SDIO1_PAD_CCMD_IN)>, + <GPIOMUX(36, + GPO_SDIO1_PAD_CDATA_OUT_BIT0, + GPO_SDIO1_PAD_CDATA_OEN_BIT0, + GPI_SDIO1_PAD_CDATA_IN_BIT0)>, + <GPIOMUX(30, + GPO_SDIO1_PAD_CDATA_OUT_BIT1, + GPO_SDIO1_PAD_CDATA_OEN_BIT1, + GPI_SDIO1_PAD_CDATA_IN_BIT1)>, + <GPIOMUX(34, + GPO_SDIO1_PAD_CDATA_OUT_BIT2, + GPO_SDIO1_PAD_CDATA_OEN_BIT2, + GPI_SDIO1_PAD_CDATA_IN_BIT2)>, + <GPIOMUX(31, + GPO_SDIO1_PAD_CDATA_OUT_BIT3, + GPO_SDIO1_PAD_CDATA_OEN_BIT3, + GPI_SDIO1_PAD_CDATA_IN_BIT3)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + }; + uart3_pins: uart3-0 { rx-pins { pinmux = <GPIOMUX(13, GPO_LOW, GPO_DISABLE, @@ -154,6 +257,34 @@ clock-frequency = <27000000>; }; +&sdio0 { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_pins>; + status = "okay"; +}; + +&sdio1 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + cap-power-off-card; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio1_pins>; + status = "okay"; + + wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index e68cafe7545f..c216aaecac53 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -32,6 +32,7 @@ i-tlb-sets = <1>; i-tlb-size = <32>; mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", @@ -60,6 +61,7 @@ i-tlb-sets = <1>; i-tlb-size = <32>; mmu-type = "riscv,sv39"; + next-level-cache = <&ccache>; riscv,isa = "rv64imafdc"; riscv,isa-base = "rv64i"; riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "zicntr", "zicsr", @@ -144,26 +146,64 @@ interrupt-parent = <&plic>; #address-cells = <2>; #size-cells = <2>; + dma-noncoherent; ranges; clint: clint@2000000 { compatible = "starfive,jh7100-clint", "sifive,clint0"; reg = <0x0 0x2000000 0x0 0x10000>; - interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 - &cpu1_intc 3 &cpu1_intc 7>; + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, + <&cpu1_intc 3>, <&cpu1_intc 7>; + }; + + ccache: cache-controller@2010000 { + compatible = "starfive,jh7100-ccache", "sifive,ccache0", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; + interrupts = <128>, <130>, <131>, <129>; + cache-block-size = <64>; + cache-level = <2>; + cache-sets = <2048>; + cache-size = <2097152>; + cache-unified; }; plic: interrupt-controller@c000000 { compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0"; reg = <0x0 0xc000000 0x0 0x4000000>; - interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9 - &cpu1_intc 11 &cpu1_intc 9>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>, + <&cpu1_intc 11>, <&cpu1_intc 9>; interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; riscv,ndev = <133>; }; + sdio0: mmc@10000000 { + compatible = "snps,dw-mshc"; + reg = <0x0 0x10000000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_SDIO0_AHB>, + <&clkgen JH7100_CLK_SDIO0_CCLKINT_INV>; + clock-names = "biu", "ciu"; + interrupts = <4>; + data-addr = <0>; + fifo-depth = <32>; + fifo-watermark-aligned; + status = "disabled"; + }; + + sdio1: mmc@10010000 { + compatible = "snps,dw-mshc"; + reg = <0x0 0x10010000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_SDIO1_AHB>, + <&clkgen JH7100_CLK_SDIO1_CCLKINT_INV>; + clock-names = "biu", "ciu"; + interrupts = <5>; + data-addr = <0>; + fifo-depth = <32>; + fifo-watermark-aligned; + status = "disabled"; + }; + clkgen: clock-controller@11800000 { compatible = "starfive,jh7100-clkgen"; reg = <0x0 0x11800000 0x0 0x10000>; diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts index 70e8042c8304..d9b4de9e4757 100644 --- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts @@ -48,6 +48,10 @@ clock-frequency = <62500000>; }; +&sdhci_clk { + clock-frequency = <198000000>; +}; + &uart_sclk { clock-frequency = <100000000>; }; @@ -56,6 +60,22 @@ status = "okay"; }; +&emmc { + bus-width = <8>; + max-frequency = <198000000>; + mmc-hs400-1_8v; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + max-frequency = <198000000>; + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi index a802ab110429..1365d3a512a3 100644 --- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi +++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi @@ -29,6 +29,10 @@ clock-frequency = <62500000>; }; +&sdhci_clk { + clock-frequency = <198000000>; +}; + &uart_sclk { clock-frequency = <100000000>; }; @@ -36,3 +40,19 @@ &dmac0 { status = "okay"; }; + +&emmc { + bus-width = <8>; + max-frequency = <198000000>; + mmc-hs400-1_8v; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + max-frequency = <198000000>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi index ba4d2c673ac8..8b915e206f3a 100644 --- a/arch/riscv/boot/dts/thead/th1520.dtsi +++ b/arch/riscv/boot/dts/thead/th1520.dtsi @@ -146,6 +146,13 @@ #clock-cells = <0>; }; + sdhci_clk: sdhci-clock { + compatible = "fixed-clock"; + clock-frequency = <198000000>; + clock-output-names = "sdhci_clk"; + #clock-cells = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&plic>; @@ -304,6 +311,33 @@ status = "disabled"; }; + emmc: mmc@ffe7080000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe7080000 0x0 0x10000>; + interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + + sdio0: mmc@ffe7090000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe7090000 0x0 0x10000>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + + sdio1: mmc@ffe70a0000 { + compatible = "thead,th1520-dwcmshc"; + reg = <0xff 0xe70a0000 0x0 0x10000>; + interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sdhci_clk>; + clock-names = "core"; + status = "disabled"; + }; + timer0: timer@ffefc32000 { compatible = "snps,dw-apb-timer"; reg = <0xff 0xefc32000 0x0 0x14>; diff --git a/include/dt-bindings/clock/google,gs101.h b/include/dt-bindings/clock/google,gs101.h new file mode 100644 index 000000000000..5d2c2d907a7b --- /dev/null +++ b/include/dt-bindings/clock/google,gs101.h @@ -0,0 +1,392 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (C) 2023 Linaro Ltd. + * Author: Peter Griffin <peter.griffin@linaro.org> + * + * Device Tree binding constants for Google gs101 clock controller. + */ + +#ifndef _DT_BINDINGS_CLOCK_GOOGLE_GS101_H +#define _DT_BINDINGS_CLOCK_GOOGLE_GS101_H + +/* CMU_TOP PLL */ +#define CLK_FOUT_SHARED0_PLL 1 +#define CLK_FOUT_SHARED1_PLL 2 +#define CLK_FOUT_SHARED2_PLL 3 +#define CLK_FOUT_SHARED3_PLL 4 +#define CLK_FOUT_SPARE_PLL 5 + +/* CMU_TOP MUX */ +#define CLK_MOUT_PLL_SHARED0 6 +#define CLK_MOUT_PLL_SHARED1 7 +#define CLK_MOUT_PLL_SHARED2 8 +#define CLK_MOUT_PLL_SHARED3 9 +#define CLK_MOUT_PLL_SPARE 10 +#define CLK_MOUT_CMU_BO_BUS 11 +#define CLK_MOUT_CMU_BUS0_BUS 12 +#define CLK_MOUT_CMU_BUS1_BUS 13 +#define CLK_MOUT_CMU_BUS2_BUS 14 +#define CLK_MOUT_CMU_CIS_CLK0 15 +#define CLK_MOUT_CMU_CIS_CLK1 16 +#define CLK_MOUT_CMU_CIS_CLK2 17 +#define CLK_MOUT_CMU_CIS_CLK3 18 +#define CLK_MOUT_CMU_CIS_CLK4 19 +#define CLK_MOUT_CMU_CIS_CLK5 20 +#define CLK_MOUT_CMU_CIS_CLK6 21 +#define CLK_MOUT_CMU_CIS_CLK7 22 +#define CLK_MOUT_CMU_CMU_BOOST 23 +#define CLK_MOUT_CMU_BOOST_OPTION1 24 +#define CLK_MOUT_CMU_CORE_BUS 25 +#define CLK_MOUT_CMU_CPUCL0_DBG 26 +#define CLK_MOUT_CMU_CPUCL0_SWITCH 27 +#define CLK_MOUT_CMU_CPUCL1_SWITCH 28 +#define CLK_MOUT_CMU_CPUCL2_SWITCH 29 +#define CLK_MOUT_CMU_CSIS_BUS 30 +#define CLK_MOUT_CMU_DISP_BUS 31 +#define CLK_MOUT_CMU_DNS_BUS 32 +#define CLK_MOUT_CMU_DPU_BUS 33 +#define CLK_MOUT_CMU_EH_BUS 34 +#define CLK_MOUT_CMU_G2D_G2D 35 +#define CLK_MOUT_CMU_G2D_MSCL 36 +#define CLK_MOUT_CMU_G3AA_G3AA 37 +#define CLK_MOUT_CMU_G3D_BUSD 38 +#define CLK_MOUT_CMU_G3D_GLB 39 +#define CLK_MOUT_CMU_G3D_SWITCH 40 +#define CLK_MOUT_CMU_GDC_GDC0 41 +#define CLK_MOUT_CMU_GDC_GDC1 42 +#define CLK_MOUT_CMU_GDC_SCSC 43 +#define CLK_MOUT_CMU_HPM 44 +#define CLK_MOUT_CMU_HSI0_BUS 45 +#define CLK_MOUT_CMU_HSI0_DPGTC 46 +#define CLK_MOUT_CMU_HSI0_USB31DRD 47 +#define CLK_MOUT_CMU_HSI0_USBDPDGB 48 +#define CLK_MOUT_CMU_HSI1_BUS 49 +#define CLK_MOUT_CMU_HSI1_PCIE 50 +#define CLK_MOUT_CMU_HSI2_BUS 51 +#define CLK_MOUT_CMU_HSI2_MMC_CARD 52 +#define CLK_MOUT_CMU_HSI2_PCIE 53 +#define CLK_MOUT_CMU_HSI2_UFS_EMBD 54 +#define CLK_MOUT_CMU_IPP_BUS 55 +#define CLK_MOUT_CMU_ITP_BUS 56 +#define CLK_MOUT_CMU_MCSC_ITSC 57 +#define CLK_MOUT_CMU_MCSC_MCSC 58 +#define CLK_MOUT_CMU_MFC_MFC 59 +#define CLK_MOUT_CMU_MIF_BUSP 60 +#define CLK_MOUT_CMU_MIF_SWITCH 61 +#define CLK_MOUT_CMU_MISC_BUS 62 +#define CLK_MOUT_CMU_MISC_SSS 63 +#define CLK_MOUT_CMU_PDP_BUS 64 +#define CLK_MOUT_CMU_PDP_VRA 65 +#define CLK_MOUT_CMU_PERIC0_BUS 66 +#define CLK_MOUT_CMU_PERIC0_IP 67 +#define CLK_MOUT_CMU_PERIC1_BUS 68 +#define CLK_MOUT_CMU_PERIC1_IP 69 +#define CLK_MOUT_CMU_TNR_BUS 70 +#define CLK_MOUT_CMU_TOP_BOOST_OPTION1 71 +#define CLK_MOUT_CMU_TOP_CMUREF 72 +#define CLK_MOUT_CMU_TPU_BUS 73 +#define CLK_MOUT_CMU_TPU_TPU 74 +#define CLK_MOUT_CMU_TPU_TPUCTL 75 +#define CLK_MOUT_CMU_TPU_UART 76 +#define CLK_MOUT_CMU_CMUREF 77 + +/* CMU_TOP Dividers */ +#define CLK_DOUT_CMU_BO_BUS 78 +#define CLK_DOUT_CMU_BUS0_BUS 79 +#define CLK_DOUT_CMU_BUS1_BUS 80 +#define CLK_DOUT_CMU_BUS2_BUS 81 +#define CLK_DOUT_CMU_CIS_CLK0 82 +#define CLK_DOUT_CMU_CIS_CLK1 83 +#define CLK_DOUT_CMU_CIS_CLK2 84 +#define CLK_DOUT_CMU_CIS_CLK3 85 +#define CLK_DOUT_CMU_CIS_CLK4 86 +#define CLK_DOUT_CMU_CIS_CLK5 87 +#define CLK_DOUT_CMU_CIS_CLK6 88 +#define CLK_DOUT_CMU_CIS_CLK7 89 +#define CLK_DOUT_CMU_CORE_BUS 90 +#define CLK_DOUT_CMU_CPUCL0_DBG 91 +#define CLK_DOUT_CMU_CPUCL0_SWITCH 92 +#define CLK_DOUT_CMU_CPUCL1_SWITCH 93 +#define CLK_DOUT_CMU_CPUCL2_SWITCH 94 +#define CLK_DOUT_CMU_CSIS_BUS 95 +#define CLK_DOUT_CMU_DISP_BUS 96 +#define CLK_DOUT_CMU_DNS_BUS 97 +#define CLK_DOUT_CMU_DPU_BUS 98 +#define CLK_DOUT_CMU_EH_BUS 99 +#define CLK_DOUT_CMU_G2D_G2D 100 +#define CLK_DOUT_CMU_G2D_MSCL 101 +#define CLK_DOUT_CMU_G3AA_G3AA 102 +#define CLK_DOUT_CMU_G3D_BUSD 103 +#define CLK_DOUT_CMU_G3D_GLB 104 +#define CLK_DOUT_CMU_G3D_SWITCH 105 +#define CLK_DOUT_CMU_GDC_GDC0 106 +#define CLK_DOUT_CMU_GDC_GDC1 107 +#define CLK_DOUT_CMU_GDC_SCSC 108 +#define CLK_DOUT_CMU_CMU_HPM 109 +#define CLK_DOUT_CMU_HSI0_BUS 110 +#define CLK_DOUT_CMU_HSI0_DPGTC 111 +#define CLK_DOUT_CMU_HSI0_USB31DRD 112 +#define CLK_DOUT_CMU_HSI0_USBDPDBG 113 +#define CLK_DOUT_CMU_HSI1_BUS 114 +#define CLK_DOUT_CMU_HSI1_PCIE 115 +#define CLK_DOUT_CMU_HSI2_BUS 116 +#define CLK_DOUT_CMU_HSI2_MMC_CARD 117 +#define CLK_DOUT_CMU_HSI2_PCIE 118 +#define CLK_DOUT_CMU_HSI2_UFS_EMBD 119 +#define CLK_DOUT_CMU_IPP_BUS 120 +#define CLK_DOUT_CMU_ITP_BUS 121 +#define CLK_DOUT_CMU_MCSC_ITSC 122 +#define CLK_DOUT_CMU_MCSC_MCSC 123 +#define CLK_DOUT_CMU_MFC_MFC 124 +#define CLK_DOUT_CMU_MIF_BUSP 125 +#define CLK_DOUT_CMU_MISC_BUS 126 +#define CLK_DOUT_CMU_MISC_SSS 127 +#define CLK_DOUT_CMU_OTP 128 +#define CLK_DOUT_CMU_PDP_BUS 129 +#define CLK_DOUT_CMU_PDP_VRA 130 +#define CLK_DOUT_CMU_PERIC0_BUS 131 +#define CLK_DOUT_CMU_PERIC0_IP 132 +#define CLK_DOUT_CMU_PERIC1_BUS 133 +#define CLK_DOUT_CMU_PERIC1_IP 134 +#define CLK_DOUT_CMU_TNR_BUS 135 +#define CLK_DOUT_CMU_TPU_BUS 136 +#define CLK_DOUT_CMU_TPU_TPU 137 +#define CLK_DOUT_CMU_TPU_TPUCTL 138 +#define CLK_DOUT_CMU_TPU_UART 139 +#define CLK_DOUT_CMU_CMU_BOOST 140 +#define CLK_DOUT_CMU_CMU_CMUREF 141 +#define CLK_DOUT_CMU_SHARED0_DIV2 142 +#define CLK_DOUT_CMU_SHARED0_DIV3 143 +#define CLK_DOUT_CMU_SHARED0_DIV4 144 +#define CLK_DOUT_CMU_SHARED0_DIV5 145 +#define CLK_DOUT_CMU_SHARED1_DIV2 146 +#define CLK_DOUT_CMU_SHARED1_DIV3 147 +#define CLK_DOUT_CMU_SHARED1_DIV4 148 +#define CLK_DOUT_CMU_SHARED2_DIV2 149 +#define CLK_DOUT_CMU_SHARED3_DIV2 150 + +/* CMU_TOP Gates */ +#define CLK_GOUT_BUS0_BOOST 151 +#define CLK_GOUT_BUS1_BOOST 152 +#define CLK_GOUT_BUS2_BOOST 153 +#define CLK_GOUT_CORE_BOOST 154 +#define CLK_GOUT_CPUCL0_BOOST 155 +#define CLK_GOUT_CPUCL1_BOOST 156 +#define CLK_GOUT_CPUCL2_BOOST 157 +#define CLK_GOUT_MIF_BOOST 158 +#define CLK_GOUT_MIF_SWITCH 159 +#define CLK_GOUT_BO_BUS 160 +#define CLK_GOUT_BUS0_BUS 161 +#define CLK_GOUT_BUS1_BUS 162 +#define CLK_GOUT_BUS2_BUS 163 +#define CLK_GOUT_CIS_CLK0 164 +#define CLK_GOUT_CIS_CLK1 165 +#define CLK_GOUT_CIS_CLK2 167 +#define CLK_GOUT_CIS_CLK3 168 +#define CLK_GOUT_CIS_CLK4 169 +#define CLK_GOUT_CIS_CLK5 170 +#define CLK_GOUT_CIS_CLK6 171 +#define CLK_GOUT_CIS_CLK7 172 +#define CLK_GOUT_CMU_BOOST 173 +#define CLK_GOUT_CORE_BUS 174 +#define CLK_GOUT_CPUCL0_DBG 175 +#define CLK_GOUT_CPUCL0_SWITCH 176 +#define CLK_GOUT_CPUCL1_SWITCH 177 +#define CLK_GOUT_CPUCL2_SWITCH 178 +#define CLK_GOUT_CSIS_BUS 179 +#define CLK_GOUT_DISP_BUS 180 +#define CLK_GOUT_DNS_BUS 181 +#define CLK_GOUT_DPU_BUS 182 +#define CLK_GOUT_EH_BUS 183 +#define CLK_GOUT_G2D_G2D 184 +#define CLK_GOUT_G2D_MSCL 185 +#define CLK_GOUT_G3AA_G3AA 186 +#define CLK_GOUT_G3D_BUSD 187 +#define CLK_GOUT_G3D_GLB 188 +#define CLK_GOUT_G3D_SWITCH 189 +#define CLK_GOUT_GDC_GDC0 190 +#define CLK_GOUT_GDC_GDC1 191 +#define CLK_GOUT_GDC_SCSC 192 +#define CLK_GOUT_CMU_HPM 193 +#define CLK_GOUT_HSI0_BUS 194 +#define CLK_GOUT_HSI0_DPGTC 195 +#define CLK_GOUT_HSI0_USB31DRD 196 +#define CLK_GOUT_HSI0_USBDPDGB 197 +#define CLK_GOUT_HSI1_BUS 198 +#define CLK_GOUT_HSI1_PCIE 199 +#define CLK_GOUT_HSI2_BUS 200 +#define CLK_GOUT_HSI2_MMC_CARD 201 +#define CLK_GOUT_HSI2_PCIE 202 +#define CLK_GOUT_HSI2_UFS_EMBD 203 +#define CLK_GOUT_IPP_BUS 204 +#define CLK_GOUT_ITP_BUS 205 +#define CLK_GOUT_MCSC_ITSC 206 +#define CLK_GOUT_MCSC_MCSC 207 +#define CLK_GOUT_MFC_MFC 208 +#define CLK_GOUT_MIF_BUSP 209 +#define CLK_GOUT_MISC_BUS 210 +#define CLK_GOUT_MISC_SSS 211 +#define CLK_GOUT_PDP_BUS 212 +#define CLK_GOUT_PDP_VRA 213 +#define CLK_GOUT_G3AA 214 +#define CLK_GOUT_PERIC0_BUS 215 +#define CLK_GOUT_PERIC0_IP 216 +#define CLK_GOUT_PERIC1_BUS 217 +#define CLK_GOUT_PERIC1_IP 218 +#define CLK_GOUT_TNR_BUS 219 +#define CLK_GOUT_TOP_CMUREF 220 +#define CLK_GOUT_TPU_BUS 221 +#define CLK_GOUT_TPU_TPU 222 +#define CLK_GOUT_TPU_TPUCTL 223 +#define CLK_GOUT_TPU_UART 224 + +/* CMU_APM */ +#define CLK_MOUT_APM_FUNC 1 +#define CLK_MOUT_APM_FUNCSRC 2 +#define CLK_DOUT_APM_BOOST 3 +#define CLK_DOUT_APM_USI0_UART 4 +#define CLK_DOUT_APM_USI0_USI 5 +#define CLK_DOUT_APM_USI1_UART 6 +#define CLK_GOUT_APM_APM_CMU_APM_PCLK 7 +#define CLK_GOUT_BUS0_BOOST_OPTION1 8 +#define CLK_GOUT_CMU_BOOST_OPTION1 9 +#define CLK_GOUT_CORE_BOOST_OPTION1 10 +#define CLK_GOUT_APM_FUNC 11 +#define CLK_GOUT_APM_APBIF_GPIO_ALIVE_PCLK 12 +#define CLK_GOUT_APM_APBIF_GPIO_FAR_ALIVE_PCLK 13 +#define CLK_GOUT_APM_APBIF_PMU_ALIVE_PCLK 14 +#define CLK_GOUT_APM_APBIF_RTC_PCLK 15 +#define CLK_GOUT_APM_APBIF_TRTC_PCLK 16 +#define CLK_GOUT_APM_APM_USI0_UART_IPCLK 17 +#define CLK_GOUT_APM_APM_USI0_UART_PCLK 18 +#define CLK_GOUT_APM_APM_USI0_USI_IPCLK 19 +#define CLK_GOUT_APM_APM_USI0_USI_PCLK 20 +#define CLK_GOUT_APM_APM_USI1_UART_IPCLK 21 +#define CLK_GOUT_APM_APM_USI1_UART_PCLK 22 +#define CLK_GOUT_APM_D_TZPC_APM_PCLK 23 +#define CLK_GOUT_APM_GPC_APM_PCLK 24 +#define CLK_GOUT_APM_GREBEINTEGRATION_HCLK 25 +#define CLK_GOUT_APM_INTMEM_ACLK 26 +#define CLK_GOUT_APM_INTMEM_PCLK 27 +#define CLK_GOUT_APM_LHM_AXI_G_SWD_I_CLK 28 +#define CLK_GOUT_APM_LHM_AXI_P_AOCAPM_I_CLK 29 +#define CLK_GOUT_APM_LHM_AXI_P_APM_I_CLK 30 +#define CLK_GOUT_APM_LHS_AXI_D_APM_I_CLK 31 +#define CLK_GOUT_APM_LHS_AXI_G_DBGCORE_I_CLK 32 +#define CLK_GOUT_APM_LHS_AXI_G_SCAN2DRAM_I_CLK 33 +#define CLK_GOUT_APM_MAILBOX_APM_AOC_PCLK 34 +#define CLK_GOUT_APM_MAILBOX_APM_AP_PCLK 35 +#define CLK_GOUT_APM_MAILBOX_APM_GSA_PCLK 36 +#define CLK_GOUT_APM_MAILBOX_APM_SWD_PCLK 37 +#define CLK_GOUT_APM_MAILBOX_APM_TPU_PCLK 38 +#define CLK_GOUT_APM_MAILBOX_AP_AOC_PCLK 39 +#define CLK_GOUT_APM_MAILBOX_AP_DBGCORE_PCLK 40 +#define CLK_GOUT_APM_PMU_INTR_GEN_PCLK 41 +#define CLK_GOUT_APM_ROM_CRC32_HOST_ACLK 42 +#define CLK_GOUT_APM_ROM_CRC32_HOST_PCLK 43 +#define CLK_GOUT_APM_CLK_APM_BUS_CLK 44 +#define CLK_GOUT_APM_CLK_APM_USI0_UART_CLK 45 +#define CLK_GOUT_APM_CLK_APM_USI0_USI_CLK 46 +#define CLK_GOUT_APM_CLK_APM_USI1_UART_CLK 47 +#define CLK_GOUT_APM_SPEEDY_APM_PCLK 48 +#define CLK_GOUT_APM_SPEEDY_SUB_APM_PCLK 49 +#define CLK_GOUT_APM_SSMT_D_APM_ACLK 50 +#define CLK_GOUT_APM_SSMT_D_APM_PCLK 51 +#define CLK_GOUT_APM_SSMT_G_DBGCORE_ACLK 52 +#define CLK_GOUT_APM_SSMT_G_DBGCORE_PCLK 53 +#define CLK_GOUT_APM_SS_DBGCORE_SS_DBGCORE_HCLK 54 +#define CLK_GOUT_APM_SYSMMU_D_APM_CLK_S2 55 +#define CLK_GOUT_APM_SYSREG_APM_PCLK 56 +#define CLK_GOUT_APM_UASC_APM_ACLK 57 +#define CLK_GOUT_APM_UASC_APM_PCLK 58 +#define CLK_GOUT_APM_UASC_DBGCORE_ACLK 59 +#define CLK_GOUT_APM_UASC_DBGCORE_PCLK 60 +#define CLK_GOUT_APM_UASC_G_SWD_ACLK 61 +#define CLK_GOUT_APM_UASC_G_SWD_PCLK 62 +#define CLK_GOUT_APM_UASC_P_AOCAPM_ACLK 63 +#define CLK_GOUT_APM_UASC_P_AOCAPM_PCLK 64 +#define CLK_GOUT_APM_UASC_P_APM_ACLK 65 +#define CLK_GOUT_APM_UASC_P_APM_PCLK 66 +#define CLK_GOUT_APM_WDT_APM_PCLK 67 +#define CLK_GOUT_APM_XIU_DP_APM_ACLK 68 +#define CLK_APM_PLL_DIV2_APM 69 +#define CLK_APM_PLL_DIV4_APM 70 +#define CLK_APM_PLL_DIV16_APM 71 + +/* CMU_MISC */ +#define CLK_MOUT_MISC_BUS_USER 1 +#define CLK_MOUT_MISC_SSS_USER 2 +#define CLK_MOUT_MISC_GIC 3 +#define CLK_DOUT_MISC_BUSP 4 +#define CLK_DOUT_MISC_GIC 5 +#define CLK_GOUT_MISC_MISC_CMU_MISC_PCLK 6 +#define CLK_GOUT_MISC_OTP_CON_BIRA_I_OSCCLK 7 +#define CLK_GOUT_MISC_OTP_CON_BISR_I_OSCCLK 8 +#define CLK_GOUT_MISC_OTP_CON_TOP_I_OSCCLK 9 +#define CLK_GOUT_MISC_CLK_MISC_OSCCLK_CLK 10 +#define CLK_GOUT_MISC_ADM_AHB_SSS_HCLKM 11 +#define CLK_GOUT_MISC_AD_APB_DIT_PCLKM 12 +#define CLK_GOUT_MISC_AD_APB_PUF_PCLKM 13 +#define CLK_GOUT_MISC_DIT_ICLKL2A 14 +#define CLK_GOUT_MISC_D_TZPC_MISC_PCLK 15 +#define CLK_GOUT_MISC_GIC_GICCLK 16 +#define CLK_GOUT_MISC_GPC_MISC_PCLK 17 +#define CLK_GOUT_MISC_LHM_AST_ICC_CPUGIC_I_CLK 18 +#define CLK_GOUT_MISC_LHM_AXI_D_SSS_I_CLK 19 +#define CLK_GOUT_MISC_LHM_AXI_P_GIC_I_CLK 20 +#define CLK_GOUT_MISC_LHM_AXI_P_MISC_I_CLK 21 +#define CLK_GOUT_MISC_LHS_ACEL_D_MISC_I_CLK 22 +#define CLK_GOUT_MISC_LHS_AST_IRI_GICCPU_I_CLK 23 +#define CLK_GOUT_MISC_LHS_AXI_D_SSS_I_CLK 24 +#define CLK_GOUT_MISC_MCT_PCLK 25 +#define CLK_GOUT_MISC_OTP_CON_BIRA_PCLK 26 +#define CLK_GOUT_MISC_OTP_CON_BISR_PCLK 27 +#define CLK_GOUT_MISC_OTP_CON_TOP_PCLK 28 +#define CLK_GOUT_MISC_PDMA_ACLK 29 +#define CLK_GOUT_MISC_PPMU_DMA_ACLK 30 +#define CLK_GOUT_MISC_PPMU_MISC_ACLK 31 +#define CLK_GOUT_MISC_PPMU_MISC_PCLK 32 +#define CLK_GOUT_MISC_PUF_I_CLK 33 +#define CLK_GOUT_MISC_QE_DIT_ACLK 34 +#define CLK_GOUT_MISC_QE_DIT_PCLK 35 +#define CLK_GOUT_MISC_QE_PDMA_ACLK 36 +#define CLK_GOUT_MISC_QE_PDMA_PCLK 37 +#define CLK_GOUT_MISC_QE_PPMU_DMA_ACLK 38 +#define CLK_GOUT_MISC_QE_PPMU_DMA_PCLK 39 +#define CLK_GOUT_MISC_QE_RTIC_ACLK 40 +#define CLK_GOUT_MISC_QE_RTIC_PCLK 41 +#define CLK_GOUT_MISC_QE_SPDMA_ACLK 42 +#define CLK_GOUT_MISC_QE_SPDMA_PCLK 43 +#define CLK_GOUT_MISC_QE_SSS_ACLK 44 +#define CLK_GOUT_MISC_QE_SSS_PCLK 45 +#define CLK_GOUT_MISC_CLK_MISC_BUSD_CLK 46 +#define CLK_GOUT_MISC_CLK_MISC_BUSP_CLK 47 +#define CLK_GOUT_MISC_CLK_MISC_GIC_CLK 48 +#define CLK_GOUT_MISC_CLK_MISC_SSS_CLK 49 +#define CLK_GOUT_MISC_RTIC_I_ACLK 50 +#define CLK_GOUT_MISC_RTIC_I_PCLK 51 +#define CLK_GOUT_MISC_SPDMA_ACLK 52 +#define CLK_GOUT_MISC_SSMT_DIT_ACLK 53 +#define CLK_GOUT_MISC_SSMT_DIT_PCLK 54 +#define CLK_GOUT_MISC_SSMT_PDMA_ACLK 55 +#define CLK_GOUT_MISC_SSMT_PDMA_PCLK 56 +#define CLK_GOUT_MISC_SSMT_PPMU_DMA_ACLK 57 +#define CLK_GOUT_MISC_SSMT_PPMU_DMA_PCLK 58 +#define CLK_GOUT_MISC_SSMT_RTIC_ACLK 59 +#define CLK_GOUT_MISC_SSMT_RTIC_PCLK 60 +#define CLK_GOUT_MISC_SSMT_SPDMA_ACLK 61 +#define CLK_GOUT_MISC_SSMT_SPDMA_PCLK 62 +#define CLK_GOUT_MISC_SSMT_SSS_ACLK 63 +#define CLK_GOUT_MISC_SSMT_SSS_PCLK 64 +#define CLK_GOUT_MISC_SSS_I_ACLK 65 +#define CLK_GOUT_MISC_SSS_I_PCLK 66 +#define CLK_GOUT_MISC_SYSMMU_MISC_CLK_S2 67 +#define CLK_GOUT_MISC_SYSMMU_SSS_CLK_S1 68 +#define CLK_GOUT_MISC_SYSREG_MISC_PCLK 69 +#define CLK_GOUT_MISC_TMU_SUB_PCLK 70 +#define CLK_GOUT_MISC_TMU_TOP_PCLK 71 +#define CLK_GOUT_MISC_WDT_CLUSTER0_PCLK 72 +#define CLK_GOUT_MISC_WDT_CLUSTER1_PCLK 73 +#define CLK_GOUT_MISC_XIU_D_MISC_ACLK 74 + +#endif /* _DT_BINDINGS_CLOCK_GOOGLE_GS101_H */ diff --git a/include/dt-bindings/clock/qcom,sc8280xp-camcc.h b/include/dt-bindings/clock/qcom,sc8280xp-camcc.h new file mode 100644 index 000000000000..ea5ec73c8c6a --- /dev/null +++ b/include/dt-bindings/clock/qcom,sc8280xp-camcc.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Ltd. + */ + +#ifndef __DT_BINDINGS_CLK_QCOM_CAMCC_SC8280XP_H__ +#define __DT_BINDINGS_CLK_QCOM_CAMCC_SC8280XP_H__ + +/* CAMCC clocks */ +#define CAMCC_PLL0 0 +#define CAMCC_PLL0_OUT_EVEN 1 +#define CAMCC_PLL0_OUT_ODD 2 +#define CAMCC_PLL1 3 +#define CAMCC_PLL1_OUT_EVEN 4 +#define CAMCC_PLL2 5 +#define CAMCC_PLL3 6 +#define CAMCC_PLL3_OUT_EVEN 7 +#define CAMCC_PLL4 8 +#define CAMCC_PLL4_OUT_EVEN 9 +#define CAMCC_PLL5 10 +#define CAMCC_PLL5_OUT_EVEN 11 +#define CAMCC_PLL6 12 +#define CAMCC_PLL6_OUT_EVEN 13 +#define CAMCC_PLL7 14 +#define CAMCC_PLL7_OUT_EVEN 15 +#define CAMCC_PLL7_OUT_ODD 16 +#define CAMCC_BPS_AHB_CLK 17 +#define CAMCC_BPS_AREG_CLK 18 +#define CAMCC_BPS_AXI_CLK 19 +#define CAMCC_BPS_CLK 20 +#define CAMCC_BPS_CLK_SRC 21 +#define CAMCC_CAMNOC_AXI_CLK 22 +#define CAMCC_CAMNOC_AXI_CLK_SRC 23 +#define CAMCC_CAMNOC_DCD_XO_CLK 24 +#define CAMCC_CCI_0_CLK 25 +#define CAMCC_CCI_0_CLK_SRC 26 +#define CAMCC_CCI_1_CLK 27 +#define CAMCC_CCI_1_CLK_SRC 28 +#define CAMCC_CCI_2_CLK 29 +#define CAMCC_CCI_2_CLK_SRC 30 +#define CAMCC_CCI_3_CLK 31 +#define CAMCC_CCI_3_CLK_SRC 32 +#define CAMCC_CORE_AHB_CLK 33 +#define CAMCC_CPAS_AHB_CLK 34 +#define CAMCC_CPHY_RX_CLK_SRC 35 +#define CAMCC_CSI0PHYTIMER_CLK 36 +#define CAMCC_CSI0PHYTIMER_CLK_SRC 37 +#define CAMCC_CSI1PHYTIMER_CLK 38 +#define CAMCC_CSI1PHYTIMER_CLK_SRC 39 +#define CAMCC_CSI2PHYTIMER_CLK 40 +#define CAMCC_CSI2PHYTIMER_CLK_SRC 41 +#define CAMCC_CSI3PHYTIMER_CLK 42 +#define CAMCC_CSI3PHYTIMER_CLK_SRC 43 +#define CAMCC_CSIPHY0_CLK 44 +#define CAMCC_CSIPHY1_CLK 45 +#define CAMCC_CSIPHY2_CLK 46 +#define CAMCC_CSIPHY3_CLK 47 +#define CAMCC_FAST_AHB_CLK_SRC 48 +#define CAMCC_GDSC_CLK 49 +#define CAMCC_ICP_AHB_CLK 50 +#define CAMCC_ICP_CLK 51 +#define CAMCC_ICP_CLK_SRC 52 +#define CAMCC_IFE_0_AXI_CLK 53 +#define CAMCC_IFE_0_CLK 54 +#define CAMCC_IFE_0_CLK_SRC 55 +#define CAMCC_IFE_0_CPHY_RX_CLK 56 +#define CAMCC_IFE_0_CSID_CLK 57 +#define CAMCC_IFE_0_CSID_CLK_SRC 58 +#define CAMCC_IFE_0_DSP_CLK 59 +#define CAMCC_IFE_1_AXI_CLK 60 +#define CAMCC_IFE_1_CLK 61 +#define CAMCC_IFE_1_CLK_SRC 62 +#define CAMCC_IFE_1_CPHY_RX_CLK 63 +#define CAMCC_IFE_1_CSID_CLK 64 +#define CAMCC_IFE_1_CSID_CLK_SRC 65 +#define CAMCC_IFE_1_DSP_CLK 66 +#define CAMCC_IFE_2_AXI_CLK 67 +#define CAMCC_IFE_2_CLK 68 +#define CAMCC_IFE_2_CLK_SRC 69 +#define CAMCC_IFE_2_CPHY_RX_CLK 70 +#define CAMCC_IFE_2_CSID_CLK 71 +#define CAMCC_IFE_2_CSID_CLK_SRC 72 +#define CAMCC_IFE_2_DSP_CLK 73 +#define CAMCC_IFE_3_AXI_CLK 74 +#define CAMCC_IFE_3_CLK 75 +#define CAMCC_IFE_3_CLK_SRC 76 +#define CAMCC_IFE_3_CPHY_RX_CLK 77 +#define CAMCC_IFE_3_CSID_CLK 78 +#define CAMCC_IFE_3_CSID_CLK_SRC 79 +#define CAMCC_IFE_3_DSP_CLK 80 +#define CAMCC_IFE_LITE_0_CLK 81 +#define CAMCC_IFE_LITE_0_CLK_SRC 82 +#define CAMCC_IFE_LITE_0_CPHY_RX_CLK 83 +#define CAMCC_IFE_LITE_0_CSID_CLK 84 +#define CAMCC_IFE_LITE_0_CSID_CLK_SRC 85 +#define CAMCC_IFE_LITE_1_CLK 86 +#define CAMCC_IFE_LITE_1_CLK_SRC 87 +#define CAMCC_IFE_LITE_1_CPHY_RX_CLK 88 +#define CAMCC_IFE_LITE_1_CSID_CLK 89 +#define CAMCC_IFE_LITE_1_CSID_CLK_SRC 90 +#define CAMCC_IFE_LITE_2_CLK 91 +#define CAMCC_IFE_LITE_2_CLK_SRC 92 +#define CAMCC_IFE_LITE_2_CPHY_RX_CLK 93 +#define CAMCC_IFE_LITE_2_CSID_CLK 94 +#define CAMCC_IFE_LITE_2_CSID_CLK_SRC 95 +#define CAMCC_IFE_LITE_3_CLK 96 +#define CAMCC_IFE_LITE_3_CLK_SRC 97 +#define CAMCC_IFE_LITE_3_CPHY_RX_CLK 98 +#define CAMCC_IFE_LITE_3_CSID_CLK 99 +#define CAMCC_IFE_LITE_3_CSID_CLK_SRC 100 +#define CAMCC_IPE_0_AHB_CLK 101 +#define CAMCC_IPE_0_AREG_CLK 102 +#define CAMCC_IPE_0_AXI_CLK 103 +#define CAMCC_IPE_0_CLK 104 +#define CAMCC_IPE_0_CLK_SRC 105 +#define CAMCC_IPE_1_AHB_CLK 106 +#define CAMCC_IPE_1_AREG_CLK 107 +#define CAMCC_IPE_1_AXI_CLK 108 +#define CAMCC_IPE_1_CLK 109 +#define CAMCC_JPEG_CLK 110 +#define CAMCC_JPEG_CLK_SRC 111 +#define CAMCC_LRME_CLK 112 +#define CAMCC_LRME_CLK_SRC 113 +#define CAMCC_MCLK0_CLK 114 +#define CAMCC_MCLK0_CLK_SRC 115 +#define CAMCC_MCLK1_CLK 116 +#define CAMCC_MCLK1_CLK_SRC 117 +#define CAMCC_MCLK2_CLK 118 +#define CAMCC_MCLK2_CLK_SRC 119 +#define CAMCC_MCLK3_CLK 120 +#define CAMCC_MCLK3_CLK_SRC 121 +#define CAMCC_MCLK4_CLK 122 +#define CAMCC_MCLK4_CLK_SRC 123 +#define CAMCC_MCLK5_CLK 124 +#define CAMCC_MCLK5_CLK_SRC 125 +#define CAMCC_MCLK6_CLK 126 +#define CAMCC_MCLK6_CLK_SRC 127 +#define CAMCC_MCLK7_CLK 128 +#define CAMCC_MCLK7_CLK_SRC 129 +#define CAMCC_SLEEP_CLK 130 +#define CAMCC_SLEEP_CLK_SRC 131 +#define CAMCC_SLOW_AHB_CLK_SRC 132 +#define CAMCC_XO_CLK_SRC 133 + +/* CAMCC resets */ +#define CAMCC_BPS_BCR 0 +#define CAMCC_CAMNOC_BCR 1 +#define CAMCC_CCI_BCR 2 +#define CAMCC_CPAS_BCR 3 +#define CAMCC_CSI0PHY_BCR 4 +#define CAMCC_CSI1PHY_BCR 5 +#define CAMCC_CSI2PHY_BCR 6 +#define CAMCC_CSI3PHY_BCR 7 +#define CAMCC_ICP_BCR 8 +#define CAMCC_IFE_0_BCR 9 +#define CAMCC_IFE_1_BCR 10 +#define CAMCC_IFE_2_BCR 11 +#define CAMCC_IFE_3_BCR 12 +#define CAMCC_IFE_LITE_0_BCR 13 +#define CAMCC_IFE_LITE_1_BCR 14 +#define CAMCC_IFE_LITE_2_BCR 15 +#define CAMCC_IFE_LITE_3_BCR 16 +#define CAMCC_IPE_0_BCR 17 +#define CAMCC_IPE_1_BCR 18 +#define CAMCC_JPEG_BCR 19 +#define CAMCC_LRME_BCR 20 + +/* CAMCC GDSCRs */ +#define BPS_GDSC 0 +#define IFE_0_GDSC 1 +#define IFE_1_GDSC 2 +#define IFE_2_GDSC 3 +#define IFE_3_GDSC 4 +#define IPE_0_GDSC 5 +#define IPE_1_GDSC 6 +#define TITAN_TOP_GDSC 7 + +#endif /* __DT_BINDINGS_CLK_QCOM_CAMCC_SC8280XP_H__ */ diff --git a/include/dt-bindings/clock/qcom,sm8650-dispcc.h b/include/dt-bindings/clock/qcom,sm8650-dispcc.h new file mode 100644 index 000000000000..b0a668b395a5 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm8650-dispcc.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved + * Copyright (c) 2023, Linaro Ltd. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H +#define _DT_BINDINGS_CLK_QCOM_SM8650_DISP_CC_H + +/* DISP_CC clocks */ +#define DISP_CC_MDSS_ACCU_CLK 0 +#define DISP_CC_MDSS_AHB1_CLK 1 +#define DISP_CC_MDSS_AHB_CLK 2 +#define DISP_CC_MDSS_AHB_CLK_SRC 3 +#define DISP_CC_MDSS_BYTE0_CLK 4 +#define DISP_CC_MDSS_BYTE0_CLK_SRC 5 +#define DISP_CC_MDSS_BYTE0_DIV_CLK_SRC 6 +#define DISP_CC_MDSS_BYTE0_INTF_CLK 7 +#define DISP_CC_MDSS_BYTE1_CLK 8 +#define DISP_CC_MDSS_BYTE1_CLK_SRC 9 +#define DISP_CC_MDSS_BYTE1_DIV_CLK_SRC 10 +#define DISP_CC_MDSS_BYTE1_INTF_CLK 11 +#define DISP_CC_MDSS_DPTX0_AUX_CLK 12 +#define DISP_CC_MDSS_DPTX0_AUX_CLK_SRC 13 +#define DISP_CC_MDSS_DPTX0_CRYPTO_CLK 14 +#define DISP_CC_MDSS_DPTX0_LINK_CLK 15 +#define DISP_CC_MDSS_DPTX0_LINK_CLK_SRC 16 +#define DISP_CC_MDSS_DPTX0_LINK_DIV_CLK_SRC 17 +#define DISP_CC_MDSS_DPTX0_LINK_INTF_CLK 18 +#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK 19 +#define DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC 20 +#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK 21 +#define DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC 22 +#define DISP_CC_MDSS_DPTX0_USB_ROUTER_LINK_INTF_CLK 23 +#define DISP_CC_MDSS_DPTX1_AUX_CLK 24 +#define DISP_CC_MDSS_DPTX1_AUX_CLK_SRC 25 +#define DISP_CC_MDSS_DPTX1_CRYPTO_CLK 26 +#define DISP_CC_MDSS_DPTX1_LINK_CLK 27 +#define DISP_CC_MDSS_DPTX1_LINK_CLK_SRC 28 +#define DISP_CC_MDSS_DPTX1_LINK_DIV_CLK_SRC 29 +#define DISP_CC_MDSS_DPTX1_LINK_INTF_CLK 30 +#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK 31 +#define DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC 32 +#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK 33 +#define DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC 34 +#define DISP_CC_MDSS_DPTX1_USB_ROUTER_LINK_INTF_CLK 35 +#define DISP_CC_MDSS_DPTX2_AUX_CLK 36 +#define DISP_CC_MDSS_DPTX2_AUX_CLK_SRC 37 +#define DISP_CC_MDSS_DPTX2_CRYPTO_CLK 38 +#define DISP_CC_MDSS_DPTX2_LINK_CLK 39 +#define DISP_CC_MDSS_DPTX2_LINK_CLK_SRC 40 +#define DISP_CC_MDSS_DPTX2_LINK_DIV_CLK_SRC 41 +#define DISP_CC_MDSS_DPTX2_LINK_INTF_CLK 42 +#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK 43 +#define DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC 44 +#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK 45 +#define DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC 46 +#define DISP_CC_MDSS_DPTX3_AUX_CLK 47 +#define DISP_CC_MDSS_DPTX3_AUX_CLK_SRC 48 +#define DISP_CC_MDSS_DPTX3_CRYPTO_CLK 49 +#define DISP_CC_MDSS_DPTX3_LINK_CLK 50 +#define DISP_CC_MDSS_DPTX3_LINK_CLK_SRC 51 +#define DISP_CC_MDSS_DPTX3_LINK_DIV_CLK_SRC 52 +#define DISP_CC_MDSS_DPTX3_LINK_INTF_CLK 53 +#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK 54 +#define DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC 55 +#define DISP_CC_MDSS_ESC0_CLK 56 +#define DISP_CC_MDSS_ESC0_CLK_SRC 57 +#define DISP_CC_MDSS_ESC1_CLK 58 +#define DISP_CC_MDSS_ESC1_CLK_SRC 59 +#define DISP_CC_MDSS_MDP1_CLK 60 +#define DISP_CC_MDSS_MDP_CLK 61 +#define DISP_CC_MDSS_MDP_CLK_SRC 62 +#define DISP_CC_MDSS_MDP_LUT1_CLK 63 +#define DISP_CC_MDSS_MDP_LUT_CLK 64 +#define DISP_CC_MDSS_NON_GDSC_AHB_CLK 65 +#define DISP_CC_MDSS_PCLK0_CLK 66 +#define DISP_CC_MDSS_PCLK0_CLK_SRC 67 +#define DISP_CC_MDSS_PCLK1_CLK 68 +#define DISP_CC_MDSS_PCLK1_CLK_SRC 69 +#define DISP_CC_MDSS_RSCC_AHB_CLK 70 +#define DISP_CC_MDSS_RSCC_VSYNC_CLK 71 +#define DISP_CC_MDSS_VSYNC1_CLK 72 +#define DISP_CC_MDSS_VSYNC_CLK 73 +#define DISP_CC_MDSS_VSYNC_CLK_SRC 74 +#define DISP_CC_PLL0 75 +#define DISP_CC_PLL1 76 +#define DISP_CC_SLEEP_CLK 77 +#define DISP_CC_SLEEP_CLK_SRC 78 +#define DISP_CC_XO_CLK 79 +#define DISP_CC_XO_CLK_SRC 80 + +/* DISP_CC resets */ +#define DISP_CC_MDSS_CORE_BCR 0 +#define DISP_CC_MDSS_CORE_INT2_BCR 1 +#define DISP_CC_MDSS_RSCC_BCR 2 + +/* DISP_CC GDSCR */ +#define MDSS_GDSC 0 +#define MDSS_INT2_GDSC 1 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm8650-gcc.h b/include/dt-bindings/clock/qcom,sm8650-gcc.h new file mode 100644 index 000000000000..0c543ba46079 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm8650-gcc.h @@ -0,0 +1,254 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_SM8650_H +#define _DT_BINDINGS_CLK_QCOM_GCC_SM8650_H + +/* GCC clocks */ +#define GCC_AGGRE_NOC_PCIE_AXI_CLK 0 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 1 +#define GCC_AGGRE_UFS_PHY_AXI_HW_CTL_CLK 2 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 3 +#define GCC_BOOT_ROM_AHB_CLK 4 +#define GCC_CAMERA_AHB_CLK 5 +#define GCC_CAMERA_HF_AXI_CLK 6 +#define GCC_CAMERA_SF_AXI_CLK 7 +#define GCC_CAMERA_XO_CLK 8 +#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 9 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 10 +#define GCC_CNOC_PCIE_SF_AXI_CLK 11 +#define GCC_DDRSS_GPU_AXI_CLK 12 +#define GCC_DDRSS_PCIE_SF_QTB_CLK 13 +#define GCC_DISP_AHB_CLK 14 +#define GCC_DISP_HF_AXI_CLK 15 +#define GCC_DISP_XO_CLK 16 +#define GCC_GP1_CLK 17 +#define GCC_GP1_CLK_SRC 18 +#define GCC_GP2_CLK 19 +#define GCC_GP2_CLK_SRC 20 +#define GCC_GP3_CLK 21 +#define GCC_GP3_CLK_SRC 22 +#define GCC_GPLL0 23 +#define GCC_GPLL0_OUT_EVEN 24 +#define GCC_GPLL1 25 +#define GCC_GPLL3 26 +#define GCC_GPLL4 27 +#define GCC_GPLL6 28 +#define GCC_GPLL7 29 +#define GCC_GPLL9 30 +#define GCC_GPU_CFG_AHB_CLK 31 +#define GCC_GPU_GPLL0_CLK_SRC 32 +#define GCC_GPU_GPLL0_DIV_CLK_SRC 33 +#define GCC_GPU_MEMNOC_GFX_CLK 34 +#define GCC_GPU_SNOC_DVM_GFX_CLK 35 +#define GCC_PCIE_0_AUX_CLK 36 +#define GCC_PCIE_0_AUX_CLK_SRC 37 +#define GCC_PCIE_0_CFG_AHB_CLK 38 +#define GCC_PCIE_0_MSTR_AXI_CLK 39 +#define GCC_PCIE_0_PHY_RCHNG_CLK 40 +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 41 +#define GCC_PCIE_0_PIPE_CLK 42 +#define GCC_PCIE_0_PIPE_CLK_SRC 43 +#define GCC_PCIE_0_SLV_AXI_CLK 44 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 45 +#define GCC_PCIE_1_AUX_CLK 46 +#define GCC_PCIE_1_AUX_CLK_SRC 47 +#define GCC_PCIE_1_CFG_AHB_CLK 48 +#define GCC_PCIE_1_MSTR_AXI_CLK 49 +#define GCC_PCIE_1_PHY_AUX_CLK 50 +#define GCC_PCIE_1_PHY_AUX_CLK_SRC 51 +#define GCC_PCIE_1_PHY_RCHNG_CLK 52 +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 53 +#define GCC_PCIE_1_PIPE_CLK 54 +#define GCC_PCIE_1_PIPE_CLK_SRC 55 +#define GCC_PCIE_1_SLV_AXI_CLK 56 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 57 +#define GCC_PDM2_CLK 58 +#define GCC_PDM2_CLK_SRC 59 +#define GCC_PDM_AHB_CLK 60 +#define GCC_PDM_XO4_CLK 61 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 62 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 63 +#define GCC_QMIP_DISP_AHB_CLK 64 +#define GCC_QMIP_GPU_AHB_CLK 65 +#define GCC_QMIP_PCIE_AHB_CLK 66 +#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK 67 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 68 +#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 69 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 70 +#define GCC_QUPV3_I2C_CORE_CLK 71 +#define GCC_QUPV3_I2C_S0_CLK 72 +#define GCC_QUPV3_I2C_S0_CLK_SRC 73 +#define GCC_QUPV3_I2C_S1_CLK 74 +#define GCC_QUPV3_I2C_S1_CLK_SRC 75 +#define GCC_QUPV3_I2C_S2_CLK 76 +#define GCC_QUPV3_I2C_S2_CLK_SRC 77 +#define GCC_QUPV3_I2C_S3_CLK 78 +#define GCC_QUPV3_I2C_S3_CLK_SRC 79 +#define GCC_QUPV3_I2C_S4_CLK 80 +#define GCC_QUPV3_I2C_S4_CLK_SRC 81 +#define GCC_QUPV3_I2C_S5_CLK 82 +#define GCC_QUPV3_I2C_S5_CLK_SRC 83 +#define GCC_QUPV3_I2C_S6_CLK 84 +#define GCC_QUPV3_I2C_S6_CLK_SRC 85 +#define GCC_QUPV3_I2C_S7_CLK 86 +#define GCC_QUPV3_I2C_S7_CLK_SRC 87 +#define GCC_QUPV3_I2C_S8_CLK 88 +#define GCC_QUPV3_I2C_S8_CLK_SRC 89 +#define GCC_QUPV3_I2C_S9_CLK 90 +#define GCC_QUPV3_I2C_S9_CLK_SRC 91 +#define GCC_QUPV3_I2C_S_AHB_CLK 92 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 93 +#define GCC_QUPV3_WRAP1_CORE_CLK 94 +#define GCC_QUPV3_WRAP1_QSPI_REF_CLK 95 +#define GCC_QUPV3_WRAP1_QSPI_REF_CLK_SRC 96 +#define GCC_QUPV3_WRAP1_S0_CLK 97 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 98 +#define GCC_QUPV3_WRAP1_S1_CLK 99 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 100 +#define GCC_QUPV3_WRAP1_S2_CLK 101 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 102 +#define GCC_QUPV3_WRAP1_S3_CLK 103 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 104 +#define GCC_QUPV3_WRAP1_S4_CLK 105 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 106 +#define GCC_QUPV3_WRAP1_S5_CLK 107 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 108 +#define GCC_QUPV3_WRAP1_S6_CLK 109 +#define GCC_QUPV3_WRAP1_S6_CLK_SRC 110 +#define GCC_QUPV3_WRAP1_S7_CLK 111 +#define GCC_QUPV3_WRAP1_S7_CLK_SRC 112 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 113 +#define GCC_QUPV3_WRAP2_CORE_CLK 114 +#define GCC_QUPV3_WRAP2_IBI_CTRL_0_CLK_SRC 115 +#define GCC_QUPV3_WRAP2_IBI_CTRL_2_CLK 116 +#define GCC_QUPV3_WRAP2_IBI_CTRL_3_CLK 117 +#define GCC_QUPV3_WRAP2_S0_CLK 118 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 119 +#define GCC_QUPV3_WRAP2_S1_CLK 120 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 121 +#define GCC_QUPV3_WRAP2_S2_CLK 122 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 123 +#define GCC_QUPV3_WRAP2_S3_CLK 124 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 125 +#define GCC_QUPV3_WRAP2_S4_CLK 126 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 127 +#define GCC_QUPV3_WRAP2_S5_CLK 128 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 129 +#define GCC_QUPV3_WRAP2_S6_CLK 130 +#define GCC_QUPV3_WRAP2_S6_CLK_SRC 131 +#define GCC_QUPV3_WRAP2_S7_CLK 132 +#define GCC_QUPV3_WRAP2_S7_CLK_SRC 133 +#define GCC_QUPV3_WRAP3_CORE_2X_CLK 134 +#define GCC_QUPV3_WRAP3_CORE_CLK 135 +#define GCC_QUPV3_WRAP3_QSPI_REF_CLK 136 +#define GCC_QUPV3_WRAP3_QSPI_REF_CLK_SRC 137 +#define GCC_QUPV3_WRAP3_S0_CLK 138 +#define GCC_QUPV3_WRAP3_S0_CLK_SRC 139 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 140 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 141 +#define GCC_QUPV3_WRAP_2_IBI_2_AHB_CLK 142 +#define GCC_QUPV3_WRAP_2_IBI_3_AHB_CLK 143 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 144 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 145 +#define GCC_QUPV3_WRAP_3_M_AHB_CLK 146 +#define GCC_QUPV3_WRAP_3_S_AHB_CLK 147 +#define GCC_SDCC2_AHB_CLK 148 +#define GCC_SDCC2_APPS_CLK 149 +#define GCC_SDCC2_APPS_CLK_SRC 150 +#define GCC_SDCC4_AHB_CLK 151 +#define GCC_SDCC4_APPS_CLK 152 +#define GCC_SDCC4_APPS_CLK_SRC 153 +#define GCC_UFS_PHY_AHB_CLK 154 +#define GCC_UFS_PHY_AXI_CLK 155 +#define GCC_UFS_PHY_AXI_CLK_SRC 156 +#define GCC_UFS_PHY_AXI_HW_CTL_CLK 157 +#define GCC_UFS_PHY_ICE_CORE_CLK 158 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 159 +#define GCC_UFS_PHY_ICE_CORE_HW_CTL_CLK 160 +#define GCC_UFS_PHY_PHY_AUX_CLK 161 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 162 +#define GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK 163 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 164 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK_SRC 165 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 166 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK_SRC 167 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 168 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK_SRC 169 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 170 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 171 +#define GCC_UFS_PHY_UNIPRO_CORE_HW_CTL_CLK 172 +#define GCC_USB30_PRIM_MASTER_CLK 173 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 174 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 175 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 176 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 177 +#define GCC_USB30_PRIM_SLEEP_CLK 178 +#define GCC_USB3_PRIM_PHY_AUX_CLK 179 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 180 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 181 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 182 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 183 +#define GCC_VIDEO_AHB_CLK 184 +#define GCC_VIDEO_AXI0_CLK 185 +#define GCC_VIDEO_AXI1_CLK 186 +#define GCC_VIDEO_XO_CLK 187 +#define GCC_GPLL0_AO 188 +#define GCC_GPLL0_OUT_EVEN_AO 189 +#define GCC_GPLL1_AO 190 +#define GCC_GPLL3_AO 191 +#define GCC_GPLL4_AO 192 +#define GCC_GPLL6_AO 193 + +/* GCC resets */ +#define GCC_CAMERA_BCR 0 +#define GCC_DISPLAY_BCR 1 +#define GCC_GPU_BCR 2 +#define GCC_PCIE_0_BCR 3 +#define GCC_PCIE_0_LINK_DOWN_BCR 4 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 5 +#define GCC_PCIE_0_PHY_BCR 6 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 7 +#define GCC_PCIE_1_BCR 8 +#define GCC_PCIE_1_LINK_DOWN_BCR 9 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 10 +#define GCC_PCIE_1_PHY_BCR 11 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 12 +#define GCC_PCIE_PHY_BCR 13 +#define GCC_PCIE_PHY_CFG_AHB_BCR 14 +#define GCC_PCIE_PHY_COM_BCR 15 +#define GCC_PDM_BCR 16 +#define GCC_QUPV3_WRAPPER_1_BCR 17 +#define GCC_QUPV3_WRAPPER_2_BCR 18 +#define GCC_QUPV3_WRAPPER_3_BCR 19 +#define GCC_QUPV3_WRAPPER_I2C_BCR 20 +#define GCC_QUSB2PHY_PRIM_BCR 21 +#define GCC_QUSB2PHY_SEC_BCR 22 +#define GCC_SDCC2_BCR 23 +#define GCC_SDCC4_BCR 24 +#define GCC_UFS_PHY_BCR 25 +#define GCC_USB30_PRIM_BCR 26 +#define GCC_USB3_DP_PHY_PRIM_BCR 27 +#define GCC_USB3_DP_PHY_SEC_BCR 28 +#define GCC_USB3_PHY_PRIM_BCR 29 +#define GCC_USB3_PHY_SEC_BCR 30 +#define GCC_USB3PHY_PHY_PRIM_BCR 31 +#define GCC_USB3PHY_PHY_SEC_BCR 32 +#define GCC_VIDEO_AXI0_CLK_ARES 33 +#define GCC_VIDEO_AXI1_CLK_ARES 34 +#define GCC_VIDEO_BCR 35 + +/* GCC power domains */ +#define PCIE_0_GDSC 0 +#define PCIE_0_PHY_GDSC 1 +#define PCIE_1_GDSC 2 +#define PCIE_1_PHY_GDSC 3 +#define UFS_PHY_GDSC 4 +#define UFS_MEM_PHY_GDSC 5 +#define USB30_PRIM_GDSC 6 +#define USB3_PHY_GDSC 7 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm8650-gpucc.h b/include/dt-bindings/clock/qcom,sm8650-gpucc.h new file mode 100644 index 000000000000..d0dc457cfe75 --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm8650-gpucc.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8650_H +#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8650_H + +/* GPU_CC clocks */ +#define GPU_CC_AHB_CLK 0 +#define GPU_CC_CRC_AHB_CLK 1 +#define GPU_CC_CX_ACCU_SHIFT_CLK 2 +#define GPU_CC_CX_FF_CLK 3 +#define GPU_CC_CX_GMU_CLK 4 +#define GPU_CC_CXO_AON_CLK 5 +#define GPU_CC_CXO_CLK 6 +#define GPU_CC_DEMET_CLK 7 +#define GPU_CC_DPM_CLK 8 +#define GPU_CC_FF_CLK_SRC 9 +#define GPU_CC_FREQ_MEASURE_CLK 10 +#define GPU_CC_GMU_CLK_SRC 11 +#define GPU_CC_GX_ACCU_SHIFT_CLK 12 +#define GPU_CC_GX_FF_CLK 13 +#define GPU_CC_GX_GFX3D_CLK 14 +#define GPU_CC_GX_GFX3D_RDVM_CLK 15 +#define GPU_CC_GX_GMU_CLK 16 +#define GPU_CC_GX_VSENSE_CLK 17 +#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK 18 +#define GPU_CC_HUB_AON_CLK 19 +#define GPU_CC_HUB_CLK_SRC 20 +#define GPU_CC_HUB_CX_INT_CLK 21 +#define GPU_CC_HUB_DIV_CLK_SRC 22 +#define GPU_CC_MEMNOC_GFX_CLK 23 +#define GPU_CC_PLL0 24 +#define GPU_CC_PLL1 25 +#define GPU_CC_SLEEP_CLK 26 + +/* GDSCs */ +#define GPU_GX_GDSC 0 +#define GPU_CX_GDSC 1 + +#endif diff --git a/include/dt-bindings/clock/qcom,sm8650-tcsr.h b/include/dt-bindings/clock/qcom,sm8650-tcsr.h new file mode 100644 index 000000000000..b2c72d492f1f --- /dev/null +++ b/include/dt-bindings/clock/qcom,sm8650-tcsr.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_TCSR_CC_SM8650_H +#define _DT_BINDINGS_CLK_QCOM_TCSR_CC_SM8650_H + +/* TCSR CC clocks */ +#define TCSR_PCIE_0_CLKREF_EN 0 +#define TCSR_PCIE_1_CLKREF_EN 1 +#define TCSR_UFS_CLKREF_EN 2 +#define TCSR_UFS_PAD_CLKREF_EN 3 +#define TCSR_USB2_CLKREF_EN 4 +#define TCSR_USB3_CLKREF_EN 5 + +#endif diff --git a/include/dt-bindings/clock/qcom,x1e80100-gcc.h b/include/dt-bindings/clock/qcom,x1e80100-gcc.h new file mode 100644 index 000000000000..24ba9e2a5cf6 --- /dev/null +++ b/include/dt-bindings/clock/qcom,x1e80100-gcc.h @@ -0,0 +1,485 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_GCC_X1E80100_H +#define _DT_BINDINGS_CLK_QCOM_GCC_X1E80100_H + +/* GCC clocks */ +#define GCC_AGGRE_NOC_USB_NORTH_AXI_CLK 0 +#define GCC_AGGRE_NOC_USB_SOUTH_AXI_CLK 1 +#define GCC_AGGRE_UFS_PHY_AXI_CLK 2 +#define GCC_AGGRE_USB2_PRIM_AXI_CLK 3 +#define GCC_AGGRE_USB3_MP_AXI_CLK 4 +#define GCC_AGGRE_USB3_PRIM_AXI_CLK 5 +#define GCC_AGGRE_USB3_SEC_AXI_CLK 6 +#define GCC_AGGRE_USB3_TERT_AXI_CLK 7 +#define GCC_AGGRE_USB4_0_AXI_CLK 8 +#define GCC_AGGRE_USB4_1_AXI_CLK 9 +#define GCC_AGGRE_USB4_2_AXI_CLK 10 +#define GCC_AGGRE_USB_NOC_AXI_CLK 11 +#define GCC_AV1E_AHB_CLK 12 +#define GCC_AV1E_AXI_CLK 13 +#define GCC_AV1E_XO_CLK 14 +#define GCC_BOOT_ROM_AHB_CLK 15 +#define GCC_CAMERA_AHB_CLK 16 +#define GCC_CAMERA_HF_AXI_CLK 17 +#define GCC_CAMERA_SF_AXI_CLK 18 +#define GCC_CAMERA_XO_CLK 19 +#define GCC_CFG_NOC_PCIE_ANOC_AHB_CLK 20 +#define GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK 21 +#define GCC_CFG_NOC_PCIE_ANOC_SOUTH_AHB_CLK 22 +#define GCC_CFG_NOC_USB2_PRIM_AXI_CLK 23 +#define GCC_CFG_NOC_USB3_MP_AXI_CLK 24 +#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK 25 +#define GCC_CFG_NOC_USB3_SEC_AXI_CLK 26 +#define GCC_CFG_NOC_USB3_TERT_AXI_CLK 27 +#define GCC_CFG_NOC_USB_ANOC_AHB_CLK 28 +#define GCC_CFG_NOC_USB_ANOC_NORTH_AHB_CLK 29 +#define GCC_CFG_NOC_USB_ANOC_SOUTH_AHB_CLK 30 +#define GCC_CNOC_PCIE1_TUNNEL_CLK 31 +#define GCC_CNOC_PCIE2_TUNNEL_CLK 32 +#define GCC_CNOC_PCIE_NORTH_SF_AXI_CLK 33 +#define GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK 34 +#define GCC_CNOC_PCIE_TUNNEL_CLK 35 +#define GCC_DDRSS_GPU_AXI_CLK 36 +#define GCC_DISP_AHB_CLK 37 +#define GCC_DISP_HF_AXI_CLK 38 +#define GCC_DISP_XO_CLK 39 +#define GCC_GP1_CLK 40 +#define GCC_GP1_CLK_SRC 41 +#define GCC_GP2_CLK 42 +#define GCC_GP2_CLK_SRC 43 +#define GCC_GP3_CLK 44 +#define GCC_GP3_CLK_SRC 45 +#define GCC_GPLL0 46 +#define GCC_GPLL0_OUT_EVEN 47 +#define GCC_GPLL4 48 +#define GCC_GPLL7 49 +#define GCC_GPLL8 50 +#define GCC_GPLL9 51 +#define GCC_GPU_CFG_AHB_CLK 52 +#define GCC_GPU_GPLL0_CPH_CLK_SRC 53 +#define GCC_GPU_GPLL0_DIV_CPH_CLK_SRC 54 +#define GCC_GPU_MEMNOC_GFX_CLK 55 +#define GCC_GPU_SNOC_DVM_GFX_CLK 56 +#define GCC_PCIE0_PHY_RCHNG_CLK 57 +#define GCC_PCIE1_PHY_RCHNG_CLK 58 +#define GCC_PCIE2_PHY_RCHNG_CLK 59 +#define GCC_PCIE_0_AUX_CLK 60 +#define GCC_PCIE_0_AUX_CLK_SRC 61 +#define GCC_PCIE_0_CFG_AHB_CLK 62 +#define GCC_PCIE_0_MSTR_AXI_CLK 63 +#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC 64 +#define GCC_PCIE_0_PIPE_CLK 65 +#define GCC_PCIE_0_SLV_AXI_CLK 66 +#define GCC_PCIE_0_SLV_Q2A_AXI_CLK 67 +#define GCC_PCIE_1_AUX_CLK 68 +#define GCC_PCIE_1_AUX_CLK_SRC 69 +#define GCC_PCIE_1_CFG_AHB_CLK 70 +#define GCC_PCIE_1_MSTR_AXI_CLK 71 +#define GCC_PCIE_1_PHY_RCHNG_CLK_SRC 72 +#define GCC_PCIE_1_PIPE_CLK 73 +#define GCC_PCIE_1_SLV_AXI_CLK 74 +#define GCC_PCIE_1_SLV_Q2A_AXI_CLK 75 +#define GCC_PCIE_2_AUX_CLK 76 +#define GCC_PCIE_2_AUX_CLK_SRC 77 +#define GCC_PCIE_2_CFG_AHB_CLK 78 +#define GCC_PCIE_2_MSTR_AXI_CLK 79 +#define GCC_PCIE_2_PHY_RCHNG_CLK_SRC 80 +#define GCC_PCIE_2_PIPE_CLK 81 +#define GCC_PCIE_2_SLV_AXI_CLK 82 +#define GCC_PCIE_2_SLV_Q2A_AXI_CLK 83 +#define GCC_PCIE_3_AUX_CLK 84 +#define GCC_PCIE_3_AUX_CLK_SRC 85 +#define GCC_PCIE_3_CFG_AHB_CLK 86 +#define GCC_PCIE_3_MSTR_AXI_CLK 87 +#define GCC_PCIE_3_PHY_AUX_CLK 88 +#define GCC_PCIE_3_PHY_RCHNG_CLK 89 +#define GCC_PCIE_3_PHY_RCHNG_CLK_SRC 90 +#define GCC_PCIE_3_PIPE_CLK 91 +#define GCC_PCIE_3_PIPE_DIV_CLK_SRC 92 +#define GCC_PCIE_3_PIPEDIV2_CLK 93 +#define GCC_PCIE_3_SLV_AXI_CLK 94 +#define GCC_PCIE_3_SLV_Q2A_AXI_CLK 95 +#define GCC_PCIE_4_AUX_CLK 96 +#define GCC_PCIE_4_AUX_CLK_SRC 97 +#define GCC_PCIE_4_CFG_AHB_CLK 98 +#define GCC_PCIE_4_MSTR_AXI_CLK 99 +#define GCC_PCIE_4_PHY_RCHNG_CLK 100 +#define GCC_PCIE_4_PHY_RCHNG_CLK_SRC 101 +#define GCC_PCIE_4_PIPE_CLK 102 +#define GCC_PCIE_4_PIPE_DIV_CLK_SRC 103 +#define GCC_PCIE_4_PIPEDIV2_CLK 104 +#define GCC_PCIE_4_SLV_AXI_CLK 105 +#define GCC_PCIE_4_SLV_Q2A_AXI_CLK 106 +#define GCC_PCIE_5_AUX_CLK 107 +#define GCC_PCIE_5_AUX_CLK_SRC 108 +#define GCC_PCIE_5_CFG_AHB_CLK 109 +#define GCC_PCIE_5_MSTR_AXI_CLK 110 +#define GCC_PCIE_5_PHY_RCHNG_CLK 111 +#define GCC_PCIE_5_PHY_RCHNG_CLK_SRC 112 +#define GCC_PCIE_5_PIPE_CLK 113 +#define GCC_PCIE_5_PIPE_DIV_CLK_SRC 114 +#define GCC_PCIE_5_PIPEDIV2_CLK 115 +#define GCC_PCIE_5_SLV_AXI_CLK 116 +#define GCC_PCIE_5_SLV_Q2A_AXI_CLK 117 +#define GCC_PCIE_6A_AUX_CLK 118 +#define GCC_PCIE_6A_AUX_CLK_SRC 119 +#define GCC_PCIE_6A_CFG_AHB_CLK 120 +#define GCC_PCIE_6A_MSTR_AXI_CLK 121 +#define GCC_PCIE_6A_PHY_AUX_CLK 122 +#define GCC_PCIE_6A_PHY_RCHNG_CLK 123 +#define GCC_PCIE_6A_PHY_RCHNG_CLK_SRC 124 +#define GCC_PCIE_6A_PIPE_CLK 125 +#define GCC_PCIE_6A_PIPE_DIV_CLK_SRC 126 +#define GCC_PCIE_6A_PIPEDIV2_CLK 127 +#define GCC_PCIE_6A_SLV_AXI_CLK 128 +#define GCC_PCIE_6A_SLV_Q2A_AXI_CLK 129 +#define GCC_PCIE_6B_AUX_CLK 130 +#define GCC_PCIE_6B_AUX_CLK_SRC 131 +#define GCC_PCIE_6B_CFG_AHB_CLK 132 +#define GCC_PCIE_6B_MSTR_AXI_CLK 133 +#define GCC_PCIE_6B_PHY_AUX_CLK 134 +#define GCC_PCIE_6B_PHY_RCHNG_CLK 135 +#define GCC_PCIE_6B_PHY_RCHNG_CLK_SRC 136 +#define GCC_PCIE_6B_PIPE_CLK 137 +#define GCC_PCIE_6B_PIPE_DIV_CLK_SRC 138 +#define GCC_PCIE_6B_PIPEDIV2_CLK 139 +#define GCC_PCIE_6B_SLV_AXI_CLK 140 +#define GCC_PCIE_6B_SLV_Q2A_AXI_CLK 141 +#define GCC_PCIE_RSCC_AHB_CLK 142 +#define GCC_PCIE_RSCC_XO_CLK 143 +#define GCC_PCIE_RSCC_XO_CLK_SRC 144 +#define GCC_PDM2_CLK 145 +#define GCC_PDM2_CLK_SRC 146 +#define GCC_PDM_AHB_CLK 147 +#define GCC_PDM_XO4_CLK 148 +#define GCC_QMIP_AV1E_AHB_CLK 149 +#define GCC_QMIP_CAMERA_NRT_AHB_CLK 150 +#define GCC_QMIP_CAMERA_RT_AHB_CLK 151 +#define GCC_QMIP_DISP_AHB_CLK 152 +#define GCC_QMIP_GPU_AHB_CLK 153 +#define GCC_QMIP_VIDEO_CV_CPU_AHB_CLK 154 +#define GCC_QMIP_VIDEO_CVP_AHB_CLK 155 +#define GCC_QMIP_VIDEO_V_CPU_AHB_CLK 156 +#define GCC_QMIP_VIDEO_VCODEC_AHB_CLK 157 +#define GCC_QUPV3_WRAP0_CORE_2X_CLK 158 +#define GCC_QUPV3_WRAP0_CORE_CLK 159 +#define GCC_QUPV3_WRAP0_QSPI_S2_CLK 160 +#define GCC_QUPV3_WRAP0_QSPI_S3_CLK 161 +#define GCC_QUPV3_WRAP0_S0_CLK 162 +#define GCC_QUPV3_WRAP0_S0_CLK_SRC 163 +#define GCC_QUPV3_WRAP0_S1_CLK 164 +#define GCC_QUPV3_WRAP0_S1_CLK_SRC 165 +#define GCC_QUPV3_WRAP0_S2_CLK 166 +#define GCC_QUPV3_WRAP0_S2_CLK_SRC 167 +#define GCC_QUPV3_WRAP0_S2_DIV_CLK_SRC 168 +#define GCC_QUPV3_WRAP0_S3_CLK 169 +#define GCC_QUPV3_WRAP0_S3_CLK_SRC 170 +#define GCC_QUPV3_WRAP0_S3_DIV_CLK_SRC 171 +#define GCC_QUPV3_WRAP0_S4_CLK 172 +#define GCC_QUPV3_WRAP0_S4_CLK_SRC 173 +#define GCC_QUPV3_WRAP0_S5_CLK 174 +#define GCC_QUPV3_WRAP0_S5_CLK_SRC 175 +#define GCC_QUPV3_WRAP0_S6_CLK 176 +#define GCC_QUPV3_WRAP0_S6_CLK_SRC 177 +#define GCC_QUPV3_WRAP0_S7_CLK 178 +#define GCC_QUPV3_WRAP0_S7_CLK_SRC 179 +#define GCC_QUPV3_WRAP1_CORE_2X_CLK 180 +#define GCC_QUPV3_WRAP1_CORE_CLK 181 +#define GCC_QUPV3_WRAP1_QSPI_S2_CLK 182 +#define GCC_QUPV3_WRAP1_QSPI_S3_CLK 183 +#define GCC_QUPV3_WRAP1_S0_CLK 184 +#define GCC_QUPV3_WRAP1_S0_CLK_SRC 185 +#define GCC_QUPV3_WRAP1_S1_CLK 186 +#define GCC_QUPV3_WRAP1_S1_CLK_SRC 187 +#define GCC_QUPV3_WRAP1_S2_CLK 188 +#define GCC_QUPV3_WRAP1_S2_CLK_SRC 189 +#define GCC_QUPV3_WRAP1_S2_DIV_CLK_SRC 190 +#define GCC_QUPV3_WRAP1_S3_CLK 191 +#define GCC_QUPV3_WRAP1_S3_CLK_SRC 192 +#define GCC_QUPV3_WRAP1_S3_DIV_CLK_SRC 193 +#define GCC_QUPV3_WRAP1_S4_CLK 194 +#define GCC_QUPV3_WRAP1_S4_CLK_SRC 195 +#define GCC_QUPV3_WRAP1_S5_CLK 196 +#define GCC_QUPV3_WRAP1_S5_CLK_SRC 197 +#define GCC_QUPV3_WRAP1_S6_CLK 198 +#define GCC_QUPV3_WRAP1_S6_CLK_SRC 199 +#define GCC_QUPV3_WRAP1_S7_CLK 200 +#define GCC_QUPV3_WRAP1_S7_CLK_SRC 201 +#define GCC_QUPV3_WRAP2_CORE_2X_CLK 202 +#define GCC_QUPV3_WRAP2_CORE_CLK 203 +#define GCC_QUPV3_WRAP2_QSPI_S2_CLK 204 +#define GCC_QUPV3_WRAP2_QSPI_S3_CLK 205 +#define GCC_QUPV3_WRAP2_S0_CLK 206 +#define GCC_QUPV3_WRAP2_S0_CLK_SRC 207 +#define GCC_QUPV3_WRAP2_S1_CLK 208 +#define GCC_QUPV3_WRAP2_S1_CLK_SRC 209 +#define GCC_QUPV3_WRAP2_S2_CLK 210 +#define GCC_QUPV3_WRAP2_S2_CLK_SRC 211 +#define GCC_QUPV3_WRAP2_S2_DIV_CLK_SRC 212 +#define GCC_QUPV3_WRAP2_S3_CLK 213 +#define GCC_QUPV3_WRAP2_S3_CLK_SRC 214 +#define GCC_QUPV3_WRAP2_S3_DIV_CLK_SRC 215 +#define GCC_QUPV3_WRAP2_S4_CLK 216 +#define GCC_QUPV3_WRAP2_S4_CLK_SRC 217 +#define GCC_QUPV3_WRAP2_S5_CLK 218 +#define GCC_QUPV3_WRAP2_S5_CLK_SRC 219 +#define GCC_QUPV3_WRAP2_S6_CLK 220 +#define GCC_QUPV3_WRAP2_S6_CLK_SRC 221 +#define GCC_QUPV3_WRAP2_S7_CLK 222 +#define GCC_QUPV3_WRAP2_S7_CLK_SRC 223 +#define GCC_QUPV3_WRAP_0_M_AHB_CLK 224 +#define GCC_QUPV3_WRAP_0_S_AHB_CLK 225 +#define GCC_QUPV3_WRAP_1_M_AHB_CLK 226 +#define GCC_QUPV3_WRAP_1_S_AHB_CLK 227 +#define GCC_QUPV3_WRAP_2_M_AHB_CLK 228 +#define GCC_QUPV3_WRAP_2_S_AHB_CLK 229 +#define GCC_SDCC2_AHB_CLK 230 +#define GCC_SDCC2_APPS_CLK 231 +#define GCC_SDCC2_APPS_CLK_SRC 232 +#define GCC_SDCC4_AHB_CLK 233 +#define GCC_SDCC4_APPS_CLK 234 +#define GCC_SDCC4_APPS_CLK_SRC 235 +#define GCC_SYS_NOC_USB_AXI_CLK 236 +#define GCC_UFS_PHY_AHB_CLK 237 +#define GCC_UFS_PHY_AXI_CLK 238 +#define GCC_UFS_PHY_AXI_CLK_SRC 239 +#define GCC_UFS_PHY_ICE_CORE_CLK 240 +#define GCC_UFS_PHY_ICE_CORE_CLK_SRC 241 +#define GCC_UFS_PHY_PHY_AUX_CLK 242 +#define GCC_UFS_PHY_PHY_AUX_CLK_SRC 243 +#define GCC_UFS_PHY_RX_SYMBOL_0_CLK 244 +#define GCC_UFS_PHY_RX_SYMBOL_1_CLK 245 +#define GCC_UFS_PHY_TX_SYMBOL_0_CLK 246 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK 247 +#define GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC 248 +#define GCC_USB20_MASTER_CLK 249 +#define GCC_USB20_MASTER_CLK_SRC 250 +#define GCC_USB20_MOCK_UTMI_CLK 251 +#define GCC_USB20_MOCK_UTMI_CLK_SRC 252 +#define GCC_USB20_MOCK_UTMI_POSTDIV_CLK_SRC 253 +#define GCC_USB20_SLEEP_CLK 254 +#define GCC_USB30_MP_MASTER_CLK 255 +#define GCC_USB30_MP_MASTER_CLK_SRC 256 +#define GCC_USB30_MP_MOCK_UTMI_CLK 257 +#define GCC_USB30_MP_MOCK_UTMI_CLK_SRC 258 +#define GCC_USB30_MP_MOCK_UTMI_POSTDIV_CLK_SRC 259 +#define GCC_USB30_MP_SLEEP_CLK 260 +#define GCC_USB30_PRIM_MASTER_CLK 261 +#define GCC_USB30_PRIM_MASTER_CLK_SRC 262 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK 263 +#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC 264 +#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC 265 +#define GCC_USB30_PRIM_SLEEP_CLK 266 +#define GCC_USB30_SEC_MASTER_CLK 267 +#define GCC_USB30_SEC_MASTER_CLK_SRC 268 +#define GCC_USB30_SEC_MOCK_UTMI_CLK 269 +#define GCC_USB30_SEC_MOCK_UTMI_CLK_SRC 270 +#define GCC_USB30_SEC_MOCK_UTMI_POSTDIV_CLK_SRC 271 +#define GCC_USB30_SEC_SLEEP_CLK 272 +#define GCC_USB30_TERT_MASTER_CLK 273 +#define GCC_USB30_TERT_MASTER_CLK_SRC 274 +#define GCC_USB30_TERT_MOCK_UTMI_CLK 275 +#define GCC_USB30_TERT_MOCK_UTMI_CLK_SRC 276 +#define GCC_USB30_TERT_MOCK_UTMI_POSTDIV_CLK_SRC 277 +#define GCC_USB30_TERT_SLEEP_CLK 278 +#define GCC_USB3_MP_PHY_AUX_CLK 279 +#define GCC_USB3_MP_PHY_AUX_CLK_SRC 280 +#define GCC_USB3_MP_PHY_COM_AUX_CLK 281 +#define GCC_USB3_MP_PHY_PIPE_0_CLK 282 +#define GCC_USB3_MP_PHY_PIPE_1_CLK 283 +#define GCC_USB3_PRIM_PHY_AUX_CLK 284 +#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC 285 +#define GCC_USB3_PRIM_PHY_COM_AUX_CLK 286 +#define GCC_USB3_PRIM_PHY_PIPE_CLK 287 +#define GCC_USB3_SEC_PHY_AUX_CLK 288 +#define GCC_USB3_SEC_PHY_AUX_CLK_SRC 289 +#define GCC_USB3_SEC_PHY_COM_AUX_CLK 290 +#define GCC_USB3_SEC_PHY_PIPE_CLK 291 +#define GCC_USB3_TERT_PHY_AUX_CLK 292 +#define GCC_USB3_TERT_PHY_AUX_CLK_SRC 293 +#define GCC_USB3_TERT_PHY_COM_AUX_CLK 294 +#define GCC_USB3_TERT_PHY_PIPE_CLK 295 +#define GCC_USB4_0_CFG_AHB_CLK 296 +#define GCC_USB4_0_DP0_CLK 297 +#define GCC_USB4_0_DP1_CLK 298 +#define GCC_USB4_0_MASTER_CLK 299 +#define GCC_USB4_0_MASTER_CLK_SRC 300 +#define GCC_USB4_0_PHY_P2RR2P_PIPE_CLK 301 +#define GCC_USB4_0_PHY_PCIE_PIPE_CLK 302 +#define GCC_USB4_0_PHY_PCIE_PIPE_CLK_SRC 303 +#define GCC_USB4_0_PHY_RX0_CLK 304 +#define GCC_USB4_0_PHY_RX1_CLK 305 +#define GCC_USB4_0_PHY_USB_PIPE_CLK 306 +#define GCC_USB4_0_SB_IF_CLK 307 +#define GCC_USB4_0_SB_IF_CLK_SRC 308 +#define GCC_USB4_0_SYS_CLK 309 +#define GCC_USB4_0_TMU_CLK 310 +#define GCC_USB4_0_TMU_CLK_SRC 311 +#define GCC_USB4_1_CFG_AHB_CLK 312 +#define GCC_USB4_1_DP0_CLK 313 +#define GCC_USB4_1_DP1_CLK 314 +#define GCC_USB4_1_MASTER_CLK 315 +#define GCC_USB4_1_MASTER_CLK_SRC 316 +#define GCC_USB4_1_PHY_P2RR2P_PIPE_CLK 317 +#define GCC_USB4_1_PHY_PCIE_PIPE_CLK 318 +#define GCC_USB4_1_PHY_PCIE_PIPE_CLK_SRC 319 +#define GCC_USB4_1_PHY_RX0_CLK 320 +#define GCC_USB4_1_PHY_RX1_CLK 321 +#define GCC_USB4_1_PHY_USB_PIPE_CLK 322 +#define GCC_USB4_1_SB_IF_CLK 323 +#define GCC_USB4_1_SB_IF_CLK_SRC 324 +#define GCC_USB4_1_SYS_CLK 325 +#define GCC_USB4_1_TMU_CLK 326 +#define GCC_USB4_1_TMU_CLK_SRC 327 +#define GCC_USB4_2_CFG_AHB_CLK 328 +#define GCC_USB4_2_DP0_CLK 329 +#define GCC_USB4_2_DP1_CLK 330 +#define GCC_USB4_2_MASTER_CLK 331 +#define GCC_USB4_2_MASTER_CLK_SRC 332 +#define GCC_USB4_2_PHY_P2RR2P_PIPE_CLK 333 +#define GCC_USB4_2_PHY_PCIE_PIPE_CLK 334 +#define GCC_USB4_2_PHY_PCIE_PIPE_CLK_SRC 335 +#define GCC_USB4_2_PHY_RX0_CLK 336 +#define GCC_USB4_2_PHY_RX1_CLK 337 +#define GCC_USB4_2_PHY_USB_PIPE_CLK 338 +#define GCC_USB4_2_SB_IF_CLK 339 +#define GCC_USB4_2_SB_IF_CLK_SRC 340 +#define GCC_USB4_2_SYS_CLK 341 +#define GCC_USB4_2_TMU_CLK 342 +#define GCC_USB4_2_TMU_CLK_SRC 343 +#define GCC_VIDEO_AHB_CLK 344 +#define GCC_VIDEO_AXI0_CLK 345 +#define GCC_VIDEO_AXI1_CLK 346 +#define GCC_VIDEO_XO_CLK 347 +#define GCC_PCIE_3_PIPE_CLK_SRC 348 +#define GCC_PCIE_4_PIPE_CLK_SRC 349 +#define GCC_PCIE_5_PIPE_CLK_SRC 350 +#define GCC_PCIE_6A_PIPE_CLK_SRC 351 +#define GCC_PCIE_6B_PIPE_CLK_SRC 352 +#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC 353 +#define GCC_USB3_SEC_PHY_PIPE_CLK_SRC 354 +#define GCC_USB3_TERT_PHY_PIPE_CLK_SRC 355 + +/* GCC power domains */ +#define GCC_PCIE_0_TUNNEL_GDSC 0 +#define GCC_PCIE_1_TUNNEL_GDSC 1 +#define GCC_PCIE_2_TUNNEL_GDSC 2 +#define GCC_PCIE_3_GDSC 3 +#define GCC_PCIE_3_PHY_GDSC 4 +#define GCC_PCIE_4_GDSC 5 +#define GCC_PCIE_4_PHY_GDSC 6 +#define GCC_PCIE_5_GDSC 7 +#define GCC_PCIE_5_PHY_GDSC 8 +#define GCC_PCIE_6_PHY_GDSC 9 +#define GCC_PCIE_6A_GDSC 10 +#define GCC_PCIE_6B_GDSC 11 +#define GCC_UFS_MEM_PHY_GDSC 12 +#define GCC_UFS_PHY_GDSC 13 +#define GCC_USB20_PRIM_GDSC 14 +#define GCC_USB30_MP_GDSC 15 +#define GCC_USB30_PRIM_GDSC 16 +#define GCC_USB30_SEC_GDSC 17 +#define GCC_USB30_TERT_GDSC 18 +#define GCC_USB3_MP_SS0_PHY_GDSC 19 +#define GCC_USB3_MP_SS1_PHY_GDSC 20 +#define GCC_USB4_0_GDSC 21 +#define GCC_USB4_1_GDSC 22 +#define GCC_USB4_2_GDSC 23 +#define GCC_USB_0_PHY_GDSC 24 +#define GCC_USB_1_PHY_GDSC 25 +#define GCC_USB_2_PHY_GDSC 26 + +/* GCC resets */ +#define GCC_AV1E_BCR 0 +#define GCC_CAMERA_BCR 1 +#define GCC_DISPLAY_BCR 2 +#define GCC_GPU_BCR 3 +#define GCC_PCIE_0_LINK_DOWN_BCR 4 +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 5 +#define GCC_PCIE_0_PHY_BCR 6 +#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR 7 +#define GCC_PCIE_0_TUNNEL_BCR 8 +#define GCC_PCIE_1_LINK_DOWN_BCR 9 +#define GCC_PCIE_1_NOCSR_COM_PHY_BCR 10 +#define GCC_PCIE_1_PHY_BCR 11 +#define GCC_PCIE_1_PHY_NOCSR_COM_PHY_BCR 12 +#define GCC_PCIE_1_TUNNEL_BCR 13 +#define GCC_PCIE_2_LINK_DOWN_BCR 14 +#define GCC_PCIE_2_NOCSR_COM_PHY_BCR 15 +#define GCC_PCIE_2_PHY_BCR 16 +#define GCC_PCIE_2_PHY_NOCSR_COM_PHY_BCR 17 +#define GCC_PCIE_2_TUNNEL_BCR 18 +#define GCC_PCIE_3_BCR 19 +#define GCC_PCIE_3_LINK_DOWN_BCR 20 +#define GCC_PCIE_3_NOCSR_COM_PHY_BCR 21 +#define GCC_PCIE_3_PHY_BCR 22 +#define GCC_PCIE_3_PHY_NOCSR_COM_PHY_BCR 23 +#define GCC_PCIE_4_BCR 24 +#define GCC_PCIE_4_LINK_DOWN_BCR 25 +#define GCC_PCIE_4_NOCSR_COM_PHY_BCR 26 +#define GCC_PCIE_4_PHY_BCR 27 +#define GCC_PCIE_4_PHY_NOCSR_COM_PHY_BCR 28 +#define GCC_PCIE_5_BCR 29 +#define GCC_PCIE_5_LINK_DOWN_BCR 30 +#define GCC_PCIE_5_NOCSR_COM_PHY_BCR 31 +#define GCC_PCIE_5_PHY_BCR 32 +#define GCC_PCIE_5_PHY_NOCSR_COM_PHY_BCR 33 +#define GCC_PCIE_6A_BCR 34 +#define GCC_PCIE_6A_LINK_DOWN_BCR 35 +#define GCC_PCIE_6A_NOCSR_COM_PHY_BCR 36 +#define GCC_PCIE_6A_PHY_BCR 37 +#define GCC_PCIE_6A_PHY_NOCSR_COM_PHY_BCR 38 +#define GCC_PCIE_6B_BCR 39 +#define GCC_PCIE_6B_LINK_DOWN_BCR 40 +#define GCC_PCIE_6B_NOCSR_COM_PHY_BCR 41 +#define GCC_PCIE_6B_PHY_BCR 42 +#define GCC_PCIE_6B_PHY_NOCSR_COM_PHY_BCR 43 +#define GCC_PCIE_PHY_BCR 44 +#define GCC_PCIE_PHY_CFG_AHB_BCR 45 +#define GCC_PCIE_PHY_COM_BCR 46 +#define GCC_PCIE_RSCC_BCR 47 +#define GCC_PDM_BCR 48 +#define GCC_QUPV3_WRAPPER_0_BCR 49 +#define GCC_QUPV3_WRAPPER_1_BCR 50 +#define GCC_QUPV3_WRAPPER_2_BCR 51 +#define GCC_QUSB2PHY_HS0_MP_BCR 52 +#define GCC_QUSB2PHY_HS1_MP_BCR 53 +#define GCC_QUSB2PHY_PRIM_BCR 54 +#define GCC_QUSB2PHY_SEC_BCR 55 +#define GCC_QUSB2PHY_TERT_BCR 56 +#define GCC_QUSB2PHY_USB20_HS_BCR 57 +#define GCC_SDCC2_BCR 58 +#define GCC_SDCC4_BCR 59 +#define GCC_UFS_PHY_BCR 60 +#define GCC_USB20_PRIM_BCR 61 +#define GCC_USB30_MP_BCR 62 +#define GCC_USB30_PRIM_BCR 63 +#define GCC_USB30_SEC_BCR 64 +#define GCC_USB30_TERT_BCR 65 +#define GCC_USB3_MP_SS0_PHY_BCR 66 +#define GCC_USB3_MP_SS1_PHY_BCR 67 +#define GCC_USB3_PHY_PRIM_BCR 68 +#define GCC_USB3_PHY_SEC_BCR 69 +#define GCC_USB3_PHY_TERT_BCR 70 +#define GCC_USB3_UNIPHY_MP0_BCR 71 +#define GCC_USB3_UNIPHY_MP1_BCR 72 +#define GCC_USB3PHY_PHY_PRIM_BCR 73 +#define GCC_USB3PHY_PHY_SEC_BCR 74 +#define GCC_USB3PHY_PHY_TERT_BCR 75 +#define GCC_USB3UNIPHY_PHY_MP0_BCR 76 +#define GCC_USB3UNIPHY_PHY_MP1_BCR 77 +#define GCC_USB4_0_BCR 78 +#define GCC_USB4_0_DP0_PHY_PRIM_BCR 79 +#define GCC_USB4_1_DP0_PHY_SEC_BCR 80 +#define GCC_USB4_2_DP0_PHY_TERT_BCR 81 +#define GCC_USB4_1_BCR 82 +#define GCC_USB4_2_BCR 83 +#define GCC_USB_0_PHY_BCR 84 +#define GCC_USB_1_PHY_BCR 85 +#define GCC_USB_2_PHY_BCR 86 +#define GCC_VIDEO_BCR 87 +#endif diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-pm7325.h b/include/dt-bindings/iio/qcom,spmi-adc7-pm7325.h new file mode 100644 index 000000000000..96908014e09e --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-pm7325.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_PM7325_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_PM7325_H + +#ifndef PM7325_SID +#define PM7325_SID 1 +#endif + +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +/* ADC channels for PM7325_ADC for PMIC7 */ +#define PM7325_ADC7_REF_GND (PM7325_SID << 8 | ADC7_REF_GND) +#define PM7325_ADC7_1P25VREF (PM7325_SID << 8 | ADC7_1P25VREF) +#define PM7325_ADC7_VREF_VADC (PM7325_SID << 8 | ADC7_VREF_VADC) +#define PM7325_ADC7_DIE_TEMP (PM7325_SID << 8 | ADC7_DIE_TEMP) + +#define PM7325_ADC7_AMUX_THM1 (PM7325_SID << 8 | ADC7_AMUX_THM1) +#define PM7325_ADC7_AMUX_THM2 (PM7325_SID << 8 | ADC7_AMUX_THM2) +#define PM7325_ADC7_AMUX_THM3 (PM7325_SID << 8 | ADC7_AMUX_THM3) +#define PM7325_ADC7_AMUX_THM4 (PM7325_SID << 8 | ADC7_AMUX_THM4) +#define PM7325_ADC7_AMUX_THM5 (PM7325_SID << 8 | ADC7_AMUX_THM5) +#define PM7325_ADC7_GPIO1 (PM7325_SID << 8 | ADC7_GPIO1) +#define PM7325_ADC7_GPIO2 (PM7325_SID << 8 | ADC7_GPIO2) +#define PM7325_ADC7_GPIO3 (PM7325_SID << 8 | ADC7_GPIO3) +#define PM7325_ADC7_GPIO4 (PM7325_SID << 8 | ADC7_GPIO4) + +/* 30k pull-up1 */ +#define PM7325_ADC7_AMUX_THM1_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM1_30K_PU) +#define PM7325_ADC7_AMUX_THM2_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM2_30K_PU) +#define PM7325_ADC7_AMUX_THM3_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM3_30K_PU) +#define PM7325_ADC7_AMUX_THM4_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM4_30K_PU) +#define PM7325_ADC7_AMUX_THM5_30K_PU (PM7325_SID << 8 | ADC7_AMUX_THM5_30K_PU) +#define PM7325_ADC7_GPIO1_30K_PU (PM7325_SID << 8 | ADC7_GPIO1_30K_PU) +#define PM7325_ADC7_GPIO2_30K_PU (PM7325_SID << 8 | ADC7_GPIO2_30K_PU) +#define PM7325_ADC7_GPIO3_30K_PU (PM7325_SID << 8 | ADC7_GPIO3_30K_PU) +#define PM7325_ADC7_GPIO4_30K_PU (PM7325_SID << 8 | ADC7_GPIO4_30K_PU) + +/* 100k pull-up2 */ +#define PM7325_ADC7_AMUX_THM1_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM1_100K_PU) +#define PM7325_ADC7_AMUX_THM2_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM2_100K_PU) +#define PM7325_ADC7_AMUX_THM3_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM3_100K_PU) +#define PM7325_ADC7_AMUX_THM4_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM4_100K_PU) +#define PM7325_ADC7_AMUX_THM5_100K_PU (PM7325_SID << 8 | ADC7_AMUX_THM5_100K_PU) +#define PM7325_ADC7_GPIO1_100K_PU (PM7325_SID << 8 | ADC7_GPIO1_100K_PU) +#define PM7325_ADC7_GPIO2_100K_PU (PM7325_SID << 8 | ADC7_GPIO2_100K_PU) +#define PM7325_ADC7_GPIO3_100K_PU (PM7325_SID << 8 | ADC7_GPIO3_100K_PU) +#define PM7325_ADC7_GPIO4_100K_PU (PM7325_SID << 8 | ADC7_GPIO4_100K_PU) + +/* 400k pull-up3 */ +#define PM7325_ADC7_AMUX_THM1_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM1_400K_PU) +#define PM7325_ADC7_AMUX_THM2_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM2_400K_PU) +#define PM7325_ADC7_AMUX_THM3_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM3_400K_PU) +#define PM7325_ADC7_AMUX_THM4_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM4_400K_PU) +#define PM7325_ADC7_AMUX_THM5_400K_PU (PM7325_SID << 8 | ADC7_AMUX_THM5_400K_PU) +#define PM7325_ADC7_GPIO1_400K_PU (PM7325_SID << 8 | ADC7_GPIO1_400K_PU) +#define PM7325_ADC7_GPIO2_400K_PU (PM7325_SID << 8 | ADC7_GPIO2_400K_PU) +#define PM7325_ADC7_GPIO3_400K_PU (PM7325_SID << 8 | ADC7_GPIO3_400K_PU) +#define PM7325_ADC7_GPIO4_400K_PU (PM7325_SID << 8 | ADC7_GPIO4_400K_PU) + +/* 1/3 Divider */ +#define PM7325_ADC7_GPIO4_DIV3 (PM7325_SID << 8 | ADC7_GPIO4_DIV3) + +#define PM7325_ADC7_VPH_PWR (PM7325_SID << 8 | ADC7_VPH_PWR) + +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_PM7325_H */ diff --git a/include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h b/include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h new file mode 100644 index 000000000000..c0680d1285cf --- /dev/null +++ b/include/dt-bindings/iio/qcom,spmi-adc7-smb139x.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */ +/* + * Copyright (c) 2020 The Linux Foundation. All rights reserved. + */ + +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_SMB139X_H +#define _DT_BINDINGS_QCOM_SPMI_VADC_SMB139X_H + +#include <dt-bindings/iio/qcom,spmi-vadc.h> + +#define SMB139x_1_ADC7_SMB_TEMP (SMB139x_1_SID << 8 | ADC7_SMB_TEMP) +#define SMB139x_1_ADC7_ICHG_SMB (SMB139x_1_SID << 8 | ADC7_ICHG_SMB) +#define SMB139x_1_ADC7_IIN_SMB (SMB139x_1_SID << 8 | ADC7_IIN_SMB) + +#define SMB139x_2_ADC7_SMB_TEMP (SMB139x_2_SID << 8 | ADC7_SMB_TEMP) +#define SMB139x_2_ADC7_ICHG_SMB (SMB139x_2_SID << 8 | ADC7_ICHG_SMB) +#define SMB139x_2_ADC7_IIN_SMB (SMB139x_2_SID << 8 | ADC7_IIN_SMB) + +#endif diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h index 08adfe25964c..ef07ecd4d585 100644 --- a/include/dt-bindings/iio/qcom,spmi-vadc.h +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h @@ -239,12 +239,15 @@ #define ADC7_GPIO3 0x0c #define ADC7_GPIO4 0x0d +#define ADC7_SMB_TEMP 0x06 #define ADC7_CHG_TEMP 0x10 #define ADC7_USB_IN_V_16 0x11 #define ADC7_VDC_16 0x12 #define ADC7_CC1_ID 0x13 #define ADC7_VREF_BAT_THERM 0x15 #define ADC7_IIN_FB 0x17 +#define ADC7_ICHG_SMB 0x18 +#define ADC7_IIN_SMB 0x19 /* 30k pull-up1 */ #define ADC7_AMUX_THM1_30K_PU 0x24 diff --git a/include/dt-bindings/interconnect/qcom,sm6115.h b/include/dt-bindings/interconnect/qcom,sm6115.h new file mode 100644 index 000000000000..21090e585f05 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,sm6115.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */ +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM6115_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SM6115_H + +/* BIMC */ +#define MASTER_AMPSS_M0 0 +#define MASTER_SNOC_BIMC_RT 1 +#define MASTER_SNOC_BIMC_NRT 2 +#define SNOC_BIMC_MAS 3 +#define MASTER_GRAPHICS_3D 4 +#define MASTER_TCU_0 5 +#define SLAVE_EBI_CH0 6 +#define BIMC_SNOC_SLV 7 + +/* CNOC */ +#define SNOC_CNOC_MAS 0 +#define MASTER_QDSS_DAP 1 +#define SLAVE_AHB2PHY_USB 2 +#define SLAVE_APSS_THROTTLE_CFG 3 +#define SLAVE_BIMC_CFG 4 +#define SLAVE_BOOT_ROM 5 +#define SLAVE_CAMERA_NRT_THROTTLE_CFG 6 +#define SLAVE_CAMERA_RT_THROTTLE_CFG 7 +#define SLAVE_CAMERA_CFG 8 +#define SLAVE_CLK_CTL 9 +#define SLAVE_RBCPR_CX_CFG 10 +#define SLAVE_RBCPR_MX_CFG 11 +#define SLAVE_CRYPTO_0_CFG 12 +#define SLAVE_DCC_CFG 13 +#define SLAVE_DDR_PHY_CFG 14 +#define SLAVE_DDR_SS_CFG 15 +#define SLAVE_DISPLAY_CFG 16 +#define SLAVE_DISPLAY_THROTTLE_CFG 17 +#define SLAVE_GPU_CFG 18 +#define SLAVE_GPU_THROTTLE_CFG 19 +#define SLAVE_HWKM_CORE 20 +#define SLAVE_IMEM_CFG 21 +#define SLAVE_IPA_CFG 22 +#define SLAVE_LPASS 23 +#define SLAVE_MAPSS 24 +#define SLAVE_MDSP_MPU_CFG 25 +#define SLAVE_MESSAGE_RAM 26 +#define SLAVE_CNOC_MSS 27 +#define SLAVE_PDM 28 +#define SLAVE_PIMEM_CFG 29 +#define SLAVE_PKA_CORE 30 +#define SLAVE_PMIC_ARB 31 +#define SLAVE_QDSS_CFG 32 +#define SLAVE_QM_CFG 33 +#define SLAVE_QM_MPU_CFG 34 +#define SLAVE_QPIC 35 +#define SLAVE_QUP_0 36 +#define SLAVE_RPM 37 +#define SLAVE_SDCC_1 38 +#define SLAVE_SDCC_2 39 +#define SLAVE_SECURITY 40 +#define SLAVE_SNOC_CFG 41 +#define SLAVE_TCSR 42 +#define SLAVE_TLMM 43 +#define SLAVE_USB3 44 +#define SLAVE_VENUS_CFG 45 +#define SLAVE_VENUS_THROTTLE_CFG 46 +#define SLAVE_VSENSE_CTRL_CFG 47 +#define SLAVE_SERVICE_CNOC 48 + +/* SNOC */ +#define MASTER_CRYPTO_CORE0 0 +#define MASTER_SNOC_CFG 1 +#define MASTER_TIC 2 +#define MASTER_ANOC_SNOC 3 +#define BIMC_SNOC_MAS 4 +#define MASTER_PIMEM 5 +#define MASTER_QDSS_BAM 6 +#define MASTER_QPIC 7 +#define MASTER_QUP_0 8 +#define MASTER_IPA 9 +#define MASTER_QDSS_ETR 10 +#define MASTER_SDCC_1 11 +#define MASTER_SDCC_2 12 +#define MASTER_USB3 13 +#define SLAVE_APPSS 14 +#define SNOC_CNOC_SLV 15 +#define SLAVE_OCIMEM 16 +#define SLAVE_PIMEM 17 +#define SNOC_BIMC_SLV 18 +#define SLAVE_SERVICE_SNOC 19 +#define SLAVE_QDSS_STM 20 +#define SLAVE_TCU 21 +#define SLAVE_ANOC_SNOC 22 + +/* CLK Virtual */ +#define MASTER_QUP_CORE_0 0 +#define SLAVE_QUP_CORE_0 1 + +/* MMRT Virtual */ +#define MASTER_CAMNOC_HF 0 +#define MASTER_MDP_PORT0 1 +#define SLAVE_SNOC_BIMC_RT 2 + +/* MMNRT Virtual */ +#define MASTER_CAMNOC_SF 0 +#define MASTER_VIDEO_P0 1 +#define MASTER_VIDEO_PROC 2 +#define SLAVE_SNOC_BIMC_NRT 3 + +#endif diff --git a/include/dt-bindings/interconnect/qcom,sm8650-rpmh.h b/include/dt-bindings/interconnect/qcom,sm8650-rpmh.h new file mode 100644 index 000000000000..6c1eaf04e241 --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,sm8650-rpmh.h @@ -0,0 +1,154 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_SM8650_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_SM8650_H + +#define MASTER_QSPI_0 0 +#define MASTER_QUP_1 1 +#define MASTER_QUP_3 2 +#define MASTER_SDCC_4 3 +#define MASTER_UFS_MEM 4 +#define MASTER_USB3_0 5 +#define SLAVE_A1NOC_SNOC 6 + +#define MASTER_QDSS_BAM 0 +#define MASTER_QUP_2 1 +#define MASTER_CRYPTO 2 +#define MASTER_IPA 3 +#define MASTER_SP 4 +#define MASTER_QDSS_ETR 5 +#define MASTER_QDSS_ETR_1 6 +#define MASTER_SDCC_2 7 +#define SLAVE_A2NOC_SNOC 8 + +#define MASTER_QUP_CORE_0 0 +#define MASTER_QUP_CORE_1 1 +#define MASTER_QUP_CORE_2 2 +#define SLAVE_QUP_CORE_0 3 +#define SLAVE_QUP_CORE_1 4 +#define SLAVE_QUP_CORE_2 5 + +#define MASTER_CNOC_CFG 0 +#define SLAVE_AHB2PHY_SOUTH 1 +#define SLAVE_AHB2PHY_NORTH 2 +#define SLAVE_CAMERA_CFG 3 +#define SLAVE_CLK_CTL 4 +#define SLAVE_RBCPR_CX_CFG 5 +#define SLAVE_CPR_HMX 6 +#define SLAVE_RBCPR_MMCX_CFG 7 +#define SLAVE_RBCPR_MXA_CFG 8 +#define SLAVE_RBCPR_MXC_CFG 9 +#define SLAVE_CPR_NSPCX 10 +#define SLAVE_CRYPTO_0_CFG 11 +#define SLAVE_CX_RDPM 12 +#define SLAVE_DISPLAY_CFG 13 +#define SLAVE_GFX3D_CFG 14 +#define SLAVE_I2C 15 +#define SLAVE_I3C_IBI0_CFG 16 +#define SLAVE_I3C_IBI1_CFG 17 +#define SLAVE_IMEM_CFG 18 +#define SLAVE_CNOC_MSS 19 +#define SLAVE_MX_2_RDPM 20 +#define SLAVE_MX_RDPM 21 +#define SLAVE_PCIE_0_CFG 22 +#define SLAVE_PCIE_1_CFG 23 +#define SLAVE_PCIE_RSCC 24 +#define SLAVE_PDM 25 +#define SLAVE_PRNG 26 +#define SLAVE_QDSS_CFG 27 +#define SLAVE_QSPI_0 28 +#define SLAVE_QUP_3 29 +#define SLAVE_QUP_1 30 +#define SLAVE_QUP_2 31 +#define SLAVE_SDCC_2 32 +#define SLAVE_SDCC_4 33 +#define SLAVE_SPSS_CFG 34 +#define SLAVE_TCSR 35 +#define SLAVE_TLMM 36 +#define SLAVE_UFS_MEM_CFG 37 +#define SLAVE_USB3_0 38 +#define SLAVE_VENUS_CFG 39 +#define SLAVE_VSENSE_CTRL_CFG 40 +#define SLAVE_CNOC_MNOC_CFG 41 +#define SLAVE_NSP_QTB_CFG 42 +#define SLAVE_PCIE_ANOC_CFG 43 +#define SLAVE_SERVICE_CNOC_CFG 44 +#define SLAVE_QDSS_STM 45 +#define SLAVE_TCU 46 + +#define MASTER_GEM_NOC_CNOC 0 +#define MASTER_GEM_NOC_PCIE_SNOC 1 +#define SLAVE_AOSS 2 +#define SLAVE_IPA_CFG 3 +#define SLAVE_IPC_ROUTER_CFG 4 +#define SLAVE_TME_CFG 5 +#define SLAVE_APPSS 6 +#define SLAVE_CNOC_CFG 7 +#define SLAVE_DDRSS_CFG 8 +#define SLAVE_IMEM 9 +#define SLAVE_SERVICE_CNOC 10 +#define SLAVE_PCIE_0 11 +#define SLAVE_PCIE_1 12 + +#define MASTER_GPU_TCU 0 +#define MASTER_SYS_TCU 1 +#define MASTER_UBWC_P_TCU 2 +#define MASTER_APPSS_PROC 3 +#define MASTER_GFX3D 4 +#define MASTER_LPASS_GEM_NOC 5 +#define MASTER_MSS_PROC 6 +#define MASTER_MNOC_HF_MEM_NOC 7 +#define MASTER_MNOC_SF_MEM_NOC 8 +#define MASTER_COMPUTE_NOC 9 +#define MASTER_ANOC_PCIE_GEM_NOC 10 +#define MASTER_SNOC_SF_MEM_NOC 11 +#define MASTER_UBWC_P 12 +#define MASTER_GIC 13 +#define SLAVE_GEM_NOC_CNOC 14 +#define SLAVE_LLCC 15 +#define SLAVE_MEM_NOC_PCIE_SNOC 16 + +#define MASTER_LPIAON_NOC 0 +#define SLAVE_LPASS_GEM_NOC 1 + +#define MASTER_LPASS_LPINOC 0 +#define SLAVE_LPIAON_NOC_LPASS_AG_NOC 1 + +#define MASTER_LPASS_PROC 0 +#define SLAVE_LPICX_NOC_LPIAON_NOC 1 + +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 + +#define MASTER_CAMNOC_HF 0 +#define MASTER_CAMNOC_ICP 1 +#define MASTER_CAMNOC_SF 2 +#define MASTER_MDP 3 +#define MASTER_CDSP_HCP 4 +#define MASTER_VIDEO 5 +#define MASTER_VIDEO_CV_PROC 6 +#define MASTER_VIDEO_PROC 7 +#define MASTER_VIDEO_V_PROC 8 +#define MASTER_CNOC_MNOC_CFG 9 +#define SLAVE_MNOC_HF_MEM_NOC 10 +#define SLAVE_MNOC_SF_MEM_NOC 11 +#define SLAVE_SERVICE_MNOC 12 + +#define MASTER_CDSP_PROC 0 +#define SLAVE_CDSP_MEM_NOC 1 + +#define MASTER_PCIE_ANOC_CFG 0 +#define MASTER_PCIE_0 1 +#define MASTER_PCIE_1 2 +#define SLAVE_ANOC_PCIE_GEM_NOC 3 +#define SLAVE_SERVICE_PCIE_ANOC 4 + +#define MASTER_A1NOC_SNOC 0 +#define MASTER_A2NOC_SNOC 1 +#define SLAVE_SNOC_GEM_NOC_SF 2 + +#endif diff --git a/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h b/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h new file mode 100644 index 000000000000..a38c3472698a --- /dev/null +++ b/include/dt-bindings/interconnect/qcom,x1e80100-rpmh.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_X1E80100_H +#define __DT_BINDINGS_INTERCONNECT_QCOM_X1E80100_H + +#define MASTER_QSPI_0 0 +#define MASTER_QUP_1 1 +#define MASTER_SDCC_4 2 +#define MASTER_UFS_MEM 3 +#define SLAVE_A1NOC_SNOC 4 + +#define MASTER_QUP_0 0 +#define MASTER_QUP_2 1 +#define MASTER_CRYPTO 2 +#define MASTER_SP 3 +#define MASTER_QDSS_ETR 4 +#define MASTER_QDSS_ETR_1 5 +#define MASTER_SDCC_2 6 +#define SLAVE_A2NOC_SNOC 7 + +#define MASTER_DDR_PERF_MODE 0 +#define MASTER_QUP_CORE_0 1 +#define MASTER_QUP_CORE_1 2 +#define MASTER_QUP_CORE_2 3 +#define SLAVE_DDR_PERF_MODE 4 +#define SLAVE_QUP_CORE_0 5 +#define SLAVE_QUP_CORE_1 6 +#define SLAVE_QUP_CORE_2 7 + +#define MASTER_CNOC_CFG 0 +#define SLAVE_AHB2PHY_SOUTH 1 +#define SLAVE_AHB2PHY_NORTH 2 +#define SLAVE_AHB2PHY_2 3 +#define SLAVE_AV1_ENC_CFG 4 +#define SLAVE_CAMERA_CFG 5 +#define SLAVE_CLK_CTL 6 +#define SLAVE_CRYPTO_0_CFG 7 +#define SLAVE_DISPLAY_CFG 8 +#define SLAVE_GFX3D_CFG 9 +#define SLAVE_IMEM_CFG 10 +#define SLAVE_IPC_ROUTER_CFG 11 +#define SLAVE_PCIE_0_CFG 12 +#define SLAVE_PCIE_1_CFG 13 +#define SLAVE_PCIE_2_CFG 14 +#define SLAVE_PCIE_3_CFG 15 +#define SLAVE_PCIE_4_CFG 16 +#define SLAVE_PCIE_5_CFG 17 +#define SLAVE_PCIE_6A_CFG 18 +#define SLAVE_PCIE_6B_CFG 19 +#define SLAVE_PCIE_RSC_CFG 20 +#define SLAVE_PDM 21 +#define SLAVE_PRNG 22 +#define SLAVE_QDSS_CFG 23 +#define SLAVE_QSPI_0 24 +#define SLAVE_QUP_0 25 +#define SLAVE_QUP_1 26 +#define SLAVE_QUP_2 27 +#define SLAVE_SDCC_2 28 +#define SLAVE_SDCC_4 29 +#define SLAVE_SMMUV3_CFG 30 +#define SLAVE_TCSR 31 +#define SLAVE_TLMM 32 +#define SLAVE_UFS_MEM_CFG 33 +#define SLAVE_USB2 34 +#define SLAVE_USB3_0 35 +#define SLAVE_USB3_1 36 +#define SLAVE_USB3_2 37 +#define SLAVE_USB3_MP 38 +#define SLAVE_USB4_0 39 +#define SLAVE_USB4_1 40 +#define SLAVE_USB4_2 41 +#define SLAVE_VENUS_CFG 42 +#define SLAVE_LPASS_QTB_CFG 43 +#define SLAVE_CNOC_MNOC_CFG 44 +#define SLAVE_NSP_QTB_CFG 45 +#define SLAVE_QDSS_STM 46 +#define SLAVE_TCU 47 + +#define MASTER_GEM_NOC_CNOC 0 +#define MASTER_GEM_NOC_PCIE_SNOC 1 +#define SLAVE_AOSS 2 +#define SLAVE_TME_CFG 3 +#define SLAVE_APPSS 4 +#define SLAVE_CNOC_CFG 5 +#define SLAVE_BOOT_IMEM 6 +#define SLAVE_IMEM 7 +#define SLAVE_PCIE_0 8 +#define SLAVE_PCIE_1 9 +#define SLAVE_PCIE_2 10 +#define SLAVE_PCIE_3 11 +#define SLAVE_PCIE_4 12 +#define SLAVE_PCIE_5 13 +#define SLAVE_PCIE_6A 14 +#define SLAVE_PCIE_6B 15 + +#define MASTER_GPU_TCU 0 +#define MASTER_PCIE_TCU 1 +#define MASTER_SYS_TCU 2 +#define MASTER_APPSS_PROC 3 +#define MASTER_GFX3D 4 +#define MASTER_LPASS_GEM_NOC 5 +#define MASTER_MNOC_HF_MEM_NOC 6 +#define MASTER_MNOC_SF_MEM_NOC 7 +#define MASTER_COMPUTE_NOC 8 +#define MASTER_ANOC_PCIE_GEM_NOC 9 +#define MASTER_SNOC_SF_MEM_NOC 10 +#define MASTER_GIC2 11 +#define SLAVE_GEM_NOC_CNOC 12 +#define SLAVE_LLCC 13 +#define SLAVE_MEM_NOC_PCIE_SNOC 14 +#define MASTER_MNOC_HF_MEM_NOC_DISP 15 +#define MASTER_ANOC_PCIE_GEM_NOC_DISP 16 +#define SLAVE_LLCC_DISP 17 +#define MASTER_ANOC_PCIE_GEM_NOC_PCIE 18 +#define SLAVE_LLCC_PCIE 19 + +#define MASTER_LPIAON_NOC 0 +#define SLAVE_LPASS_GEM_NOC 1 + +#define MASTER_LPASS_LPINOC 0 +#define SLAVE_LPIAON_NOC_LPASS_AG_NOC 1 + +#define MASTER_LPASS_PROC 0 +#define SLAVE_LPICX_NOC_LPIAON_NOC 1 + +#define MASTER_LLCC 0 +#define SLAVE_EBI1 1 +#define MASTER_LLCC_DISP 2 +#define SLAVE_EBI1_DISP 3 +#define MASTER_LLCC_PCIE 4 +#define SLAVE_EBI1_PCIE 5 + +#define MASTER_AV1_ENC 0 +#define MASTER_CAMNOC_HF 1 +#define MASTER_CAMNOC_ICP 2 +#define MASTER_CAMNOC_SF 3 +#define MASTER_EVA 4 +#define MASTER_MDP 5 +#define MASTER_VIDEO 6 +#define MASTER_VIDEO_CV_PROC 7 +#define MASTER_VIDEO_V_PROC 8 +#define MASTER_CNOC_MNOC_CFG 9 +#define SLAVE_MNOC_HF_MEM_NOC 10 +#define SLAVE_MNOC_SF_MEM_NOC 11 +#define SLAVE_SERVICE_MNOC 12 +#define MASTER_MDP_DISP 13 +#define SLAVE_MNOC_HF_MEM_NOC_DISP 14 + +#define MASTER_CDSP_PROC 0 +#define SLAVE_CDSP_MEM_NOC 1 + +#define MASTER_PCIE_NORTH 0 +#define MASTER_PCIE_SOUTH 1 +#define SLAVE_ANOC_PCIE_GEM_NOC 2 +#define MASTER_PCIE_NORTH_PCIE 3 +#define MASTER_PCIE_SOUTH_PCIE 4 +#define SLAVE_ANOC_PCIE_GEM_NOC_PCIE 5 + +#define MASTER_PCIE_3 0 +#define MASTER_PCIE_4 1 +#define MASTER_PCIE_5 2 +#define SLAVE_PCIE_NORTH 3 +#define MASTER_PCIE_3_PCIE 4 +#define MASTER_PCIE_4_PCIE 5 +#define MASTER_PCIE_5_PCIE 6 +#define SLAVE_PCIE_NORTH_PCIE 7 + +#define MASTER_PCIE_0 0 +#define MASTER_PCIE_1 1 +#define MASTER_PCIE_2 2 +#define MASTER_PCIE_6A 3 +#define MASTER_PCIE_6B 4 +#define SLAVE_PCIE_SOUTH 5 +#define MASTER_PCIE_0_PCIE 6 +#define MASTER_PCIE_1_PCIE 7 +#define MASTER_PCIE_2_PCIE 8 +#define MASTER_PCIE_6A_PCIE 9 +#define MASTER_PCIE_6B_PCIE 10 +#define SLAVE_PCIE_SOUTH_PCIE 11 + +#define MASTER_A1NOC_SNOC 0 +#define MASTER_A2NOC_SNOC 1 +#define MASTER_GIC1 2 +#define MASTER_USB_NOC_SNOC 3 +#define SLAVE_SNOC_GEM_NOC_SF 4 + +#define MASTER_AGGRE_USB_NORTH 0 +#define MASTER_AGGRE_USB_SOUTH 1 +#define SLAVE_USB_NOC_SNOC 2 + +#define MASTER_USB2 0 +#define MASTER_USB3_MP 1 +#define SLAVE_AGGRE_USB_NORTH 2 + +#define MASTER_USB3_0 0 +#define MASTER_USB3_1 1 +#define MASTER_USB3_2 2 +#define MASTER_USB4_0 3 +#define MASTER_USB4_1 4 +#define MASTER_USB4_2 5 +#define SLAVE_AGGRE_USB_SOUTH 6 + +#endif diff --git a/include/dt-bindings/reset/mt8188-resets.h b/include/dt-bindings/reset/mt8188-resets.h index ba9a5e9b8899..5a58c54e7d20 100644 --- a/include/dt-bindings/reset/mt8188-resets.h +++ b/include/dt-bindings/reset/mt8188-resets.h @@ -38,4 +38,79 @@ #define MT8188_INFRA_RST1_THERMAL_CTRL_RST 1 #define MT8188_INFRA_RST3_PTP_CTRL_RST 2 +#define MT8188_VDO0_RST_DISP_OVL0 0 +#define MT8188_VDO0_RST_FAKE_ENG0 1 +#define MT8188_VDO0_RST_DISP_CCORR0 2 +#define MT8188_VDO0_RST_DISP_MUTEX0 3 +#define MT8188_VDO0_RST_DISP_GAMMA0 4 +#define MT8188_VDO0_RST_DISP_DITHER0 5 +#define MT8188_VDO0_RST_DISP_WDMA0 6 +#define MT8188_VDO0_RST_DISP_RDMA0 7 +#define MT8188_VDO0_RST_DSI0 8 +#define MT8188_VDO0_RST_DSI1 9 +#define MT8188_VDO0_RST_DSC_WRAP0 10 +#define MT8188_VDO0_RST_VPP_MERGE0 11 +#define MT8188_VDO0_RST_DP_INTF0 12 +#define MT8188_VDO0_RST_DISP_AAL0 13 +#define MT8188_VDO0_RST_INLINEROT0 14 +#define MT8188_VDO0_RST_APB_BUS 15 +#define MT8188_VDO0_RST_DISP_COLOR0 16 +#define MT8188_VDO0_RST_MDP_WROT0 17 +#define MT8188_VDO0_RST_DISP_RSZ0 18 + +#define MT8188_VDO1_RST_SMI_LARB2 0 +#define MT8188_VDO1_RST_SMI_LARB3 1 +#define MT8188_VDO1_RST_GALS 2 +#define MT8188_VDO1_RST_FAKE_ENG0 3 +#define MT8188_VDO1_RST_FAKE_ENG1 4 +#define MT8188_VDO1_RST_MDP_RDMA0 5 +#define MT8188_VDO1_RST_MDP_RDMA1 6 +#define MT8188_VDO1_RST_MDP_RDMA2 7 +#define MT8188_VDO1_RST_MDP_RDMA3 8 +#define MT8188_VDO1_RST_VPP_MERGE0 9 +#define MT8188_VDO1_RST_VPP_MERGE1 10 +#define MT8188_VDO1_RST_VPP_MERGE2 11 +#define MT8188_VDO1_RST_VPP_MERGE3 12 +#define MT8188_VDO1_RST_VPP_MERGE4 13 +#define MT8188_VDO1_RST_VPP2_TO_VDO1_DL_ASYNC 14 +#define MT8188_VDO1_RST_VPP3_TO_VDO1_DL_ASYNC 15 +#define MT8188_VDO1_RST_DISP_MUTEX 16 +#define MT8188_VDO1_RST_MDP_RDMA4 17 +#define MT8188_VDO1_RST_MDP_RDMA5 18 +#define MT8188_VDO1_RST_MDP_RDMA6 19 +#define MT8188_VDO1_RST_MDP_RDMA7 20 +#define MT8188_VDO1_RST_DP_INTF1_MMCK 21 +#define MT8188_VDO1_RST_DPI0_MM_CK 22 +#define MT8188_VDO1_RST_DPI1_MM_CK 23 +#define MT8188_VDO1_RST_MERGE0_DL_ASYNC 24 +#define MT8188_VDO1_RST_MERGE1_DL_ASYNC 25 +#define MT8188_VDO1_RST_MERGE2_DL_ASYNC 26 +#define MT8188_VDO1_RST_MERGE3_DL_ASYNC 27 +#define MT8188_VDO1_RST_MERGE4_DL_ASYNC 28 +#define MT8188_VDO1_RST_VDO0_DSC_TO_VDO1_DL_ASYNC 29 +#define MT8188_VDO1_RST_VDO0_MERGE_TO_VDO1_DL_ASYNC 30 +#define MT8188_VDO1_RST_PADDING0 31 +#define MT8188_VDO1_RST_PADDING1 32 +#define MT8188_VDO1_RST_PADDING2 33 +#define MT8188_VDO1_RST_PADDING3 34 +#define MT8188_VDO1_RST_PADDING4 35 +#define MT8188_VDO1_RST_PADDING5 36 +#define MT8188_VDO1_RST_PADDING6 37 +#define MT8188_VDO1_RST_PADDING7 38 +#define MT8188_VDO1_RST_DISP_RSZ0 39 +#define MT8188_VDO1_RST_DISP_RSZ1 40 +#define MT8188_VDO1_RST_DISP_RSZ2 41 +#define MT8188_VDO1_RST_DISP_RSZ3 42 +#define MT8188_VDO1_RST_HDR_VDO_FE0 43 +#define MT8188_VDO1_RST_HDR_GFX_FE0 44 +#define MT8188_VDO1_RST_HDR_VDO_BE 45 +#define MT8188_VDO1_RST_HDR_VDO_FE1 46 +#define MT8188_VDO1_RST_HDR_GFX_FE1 47 +#define MT8188_VDO1_RST_DISP_MIXER 48 +#define MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC 49 +#define MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC 50 +#define MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC 51 +#define MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC 52 +#define MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC 53 + #endif /* _DT_BINDINGS_RESET_CONTROLLER_MT8188 */ diff --git a/include/dt-bindings/reset/qcom,sm8650-gpucc.h b/include/dt-bindings/reset/qcom,sm8650-gpucc.h new file mode 100644 index 000000000000..f021a6cccc66 --- /dev/null +++ b/include/dt-bindings/reset/qcom,sm8650-gpucc.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef _DT_BINDINGS_RESET_QCOM_GPU_CC_SM8650_H +#define _DT_BINDINGS_RESET_QCOM_GPU_CC_SM8650_H + +#define GPUCC_GPU_CC_ACD_BCR 0 +#define GPUCC_GPU_CC_CX_BCR 1 +#define GPUCC_GPU_CC_FAST_HUB_BCR 2 +#define GPUCC_GPU_CC_FF_BCR 3 +#define GPUCC_GPU_CC_GFX3D_AON_BCR 4 +#define GPUCC_GPU_CC_GMU_BCR 5 +#define GPUCC_GPU_CC_GX_BCR 6 +#define GPUCC_GPU_CC_XO_BCR 7 +#define GPUCC_GPU_CC_GX_ACD_IROOT_BCR 8 + +#endif |