summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/dma-buf-sharing.txt213
-rw-r--r--Documentation/driver-api/dma-buf.rst6
-rw-r--r--drivers/dma-buf/dma-buf.c122
-rw-r--r--include/linux/dma-buf.h91
4 files changed, 211 insertions, 221 deletions
diff --git a/Documentation/dma-buf-sharing.txt b/Documentation/dma-buf-sharing.txt
index dca2fb7ac3b4..74c99edb7976 100644
--- a/Documentation/dma-buf-sharing.txt
+++ b/Documentation/dma-buf-sharing.txt
@@ -6,205 +6,6 @@
<sumit dot semwal at ti dot com>
-Kernel cpu access to a dma-buf buffer object
---------------------------------------------
-
-The motivation to allow cpu access from the kernel to a dma-buf object from the
-importers side are:
-- fallback operations, e.g. if the devices is connected to a usb bus and the
- kernel needs to shuffle the data around first before sending it away.
-- full transparency for existing users on the importer side, i.e. userspace
- should not notice the difference between a normal object from that subsystem
- and an imported one backed by a dma-buf. This is really important for drm
- opengl drivers that expect to still use all the existing upload/download
- paths.
-
-Access to a dma_buf from the kernel context involves three steps:
-
-1. Prepare access, which invalidate any necessary caches and make the object
- available for cpu access.
-2. Access the object page-by-page with the dma_buf map apis
-3. Finish access, which will flush any necessary cpu caches and free reserved
- resources.
-
-1. Prepare access
-
- Before an importer can access a dma_buf object with the cpu from the kernel
- context, it needs to notify the exporter of the access that is about to
- happen.
-
- Interface:
- int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
- enum dma_data_direction direction)
-
- This allows the exporter to ensure that the memory is actually available for
- cpu access - the exporter might need to allocate or swap-in and pin the
- backing storage. The exporter also needs to ensure that cpu access is
- coherent for the access direction. The direction can be used by the exporter
- to optimize the cache flushing, i.e. access with a different direction (read
- instead of write) might return stale or even bogus data (e.g. when the
- exporter needs to copy the data to temporary storage).
-
- This step might fail, e.g. in oom conditions.
-
-2. Accessing the buffer
-
- To support dma_buf objects residing in highmem cpu access is page-based using
- an api similar to kmap. Accessing a dma_buf is done in aligned chunks of
- PAGE_SIZE size. Before accessing a chunk it needs to be mapped, which returns
- a pointer in kernel virtual address space. Afterwards the chunk needs to be
- unmapped again. There is no limit on how often a given chunk can be mapped
- and unmapped, i.e. the importer does not need to call begin_cpu_access again
- before mapping the same chunk again.
-
- Interfaces:
- void *dma_buf_kmap(struct dma_buf *, unsigned long);
- void dma_buf_kunmap(struct dma_buf *, unsigned long, void *);
-
- There are also atomic variants of these interfaces. Like for kmap they
- facilitate non-blocking fast-paths. Neither the importer nor the exporter (in
- the callback) is allowed to block when using these.
-
- Interfaces:
- void *dma_buf_kmap_atomic(struct dma_buf *, unsigned long);
- void dma_buf_kunmap_atomic(struct dma_buf *, unsigned long, void *);
-
- For importers all the restrictions of using kmap apply, like the limited
- supply of kmap_atomic slots. Hence an importer shall only hold onto at most 2
- atomic dma_buf kmaps at the same time (in any given process context).
-
- dma_buf kmap calls outside of the range specified in begin_cpu_access are
- undefined. If the range is not PAGE_SIZE aligned, kmap needs to succeed on
- the partial chunks at the beginning and end but may return stale or bogus
- data outside of the range (in these partial chunks).
-
- Note that these calls need to always succeed. The exporter needs to complete
- any preparations that might fail in begin_cpu_access.
-
- For some cases the overhead of kmap can be too high, a vmap interface
- is introduced. This interface should be used very carefully, as vmalloc
- space is a limited resources on many architectures.
-
- Interfaces:
- void *dma_buf_vmap(struct dma_buf *dmabuf)
- void dma_buf_vunmap(struct dma_buf *dmabuf, void *vaddr)
-
- The vmap call can fail if there is no vmap support in the exporter, or if it
- runs out of vmalloc space. Fallback to kmap should be implemented. Note that
- the dma-buf layer keeps a reference count for all vmap access and calls down
- into the exporter's vmap function only when no vmapping exists, and only
- unmaps it once. Protection against concurrent vmap/vunmap calls is provided
- by taking the dma_buf->lock mutex.
-
-3. Finish access
-
- When the importer is done accessing the CPU, it needs to announce this to
- the exporter (to facilitate cache flushing and unpinning of any pinned
- resources). The result of any dma_buf kmap calls after end_cpu_access is
- undefined.
-
- Interface:
- void dma_buf_end_cpu_access(struct dma_buf *dma_buf,
- enum dma_data_direction dir);
-
-
-Direct Userspace Access/mmap Support
-------------------------------------
-
-Being able to mmap an export dma-buf buffer object has 2 main use-cases:
-- CPU fallback processing in a pipeline and
-- supporting existing mmap interfaces in importers.
-
-1. CPU fallback processing in a pipeline
-
- In many processing pipelines it is sometimes required that the cpu can access
- the data in a dma-buf (e.g. for thumbnail creation, snapshots, ...). To avoid
- the need to handle this specially in userspace frameworks for buffer sharing
- it's ideal if the dma_buf fd itself can be used to access the backing storage
- from userspace using mmap.
-
- Furthermore Android's ION framework already supports this (and is otherwise
- rather similar to dma-buf from a userspace consumer side with using fds as
- handles, too). So it's beneficial to support this in a similar fashion on
- dma-buf to have a good transition path for existing Android userspace.
-
- No special interfaces, userspace simply calls mmap on the dma-buf fd, making
- sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always*
- used when the access happens. Note that DMA_BUF_IOCTL_SYNC can fail with
- -EAGAIN or -EINTR, in which case it must be restarted.
-
- Some systems might need some sort of cache coherency management e.g. when
- CPU and GPU domains are being accessed through dma-buf at the same time. To
- circumvent this problem there are begin/end coherency markers, that forward
- directly to existing dma-buf device drivers vfunc hooks. Userspace can make
- use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence
- would be used like following:
- - mmap dma-buf fd
- - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
- to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
- want (with the new data being consumed by the GPU or say scanout device)
- - munmap once you don't need the buffer any more
-
- For correctness and optimal performance, it is always required to use
- SYNC_START and SYNC_END before and after, respectively, when accessing the
- mapped address. Userspace cannot rely on coherent access, even when there
- are systems where it just works without calling these ioctls.
-
-2. Supporting existing mmap interfaces in importers
-
- Similar to the motivation for kernel cpu access it is again important that
- the userspace code of a given importing subsystem can use the same interfaces
- with a imported dma-buf buffer object as with a native buffer object. This is
- especially important for drm where the userspace part of contemporary OpenGL,
- X, and other drivers is huge, and reworking them to use a different way to
- mmap a buffer rather invasive.
-
- The assumption in the current dma-buf interfaces is that redirecting the
- initial mmap is all that's needed. A survey of some of the existing
- subsystems shows that no driver seems to do any nefarious thing like syncing
- up with outstanding asynchronous processing on the device or allocating
- special resources at fault time. So hopefully this is good enough, since
- adding interfaces to intercept pagefaults and allow pte shootdowns would
- increase the complexity quite a bit.
-
- Interface:
- int dma_buf_mmap(struct dma_buf *, struct vm_area_struct *,
- unsigned long);
-
- If the importing subsystem simply provides a special-purpose mmap call to set
- up a mapping in userspace, calling do_mmap with dma_buf->file will equally
- achieve that for a dma-buf object.
-
-3. Implementation notes for exporters
-
- Because dma-buf buffers have invariant size over their lifetime, the dma-buf
- core checks whether a vma is too large and rejects such mappings. The
- exporter hence does not need to duplicate this check.
-
- Because existing importing subsystems might presume coherent mappings for
- userspace, the exporter needs to set up a coherent mapping. If that's not
- possible, it needs to fake coherency by manually shooting down ptes when
- leaving the cpu domain and flushing caches at fault time. Note that all the
- dma_buf files share the same anon inode, hence the exporter needs to replace
- the dma_buf file stored in vma->vm_file with it's own if pte shootdown is
- required. This is because the kernel uses the underlying inode's address_space
- for vma tracking (and hence pte tracking at shootdown time with
- unmap_mapping_range).
-
- If the above shootdown dance turns out to be too expensive in certain
- scenarios, we can extend dma-buf with a more explicit cache tracking scheme
- for userspace mappings. But the current assumption is that using mmap is
- always a slower path, so some inefficiencies should be acceptable.
-
- Exporters that shoot down mappings (for any reasons) shall not do any
- synchronization at fault time with outstanding device operations.
- Synchronization is an orthogonal issue to sharing the backing storage of a
- buffer and hence should not be handled by dma-buf itself. This is explicitly
- mentioned here because many people seem to want something like this, but if
- different exporters handle this differently, buffer sharing can fail in
- interesting ways depending upong the exporter (if userspace starts depending
- upon this implicit synchronization).
-
Other Interfaces Exposed to Userspace on the dma-buf FD
------------------------------------------------------
@@ -240,20 +41,6 @@ Miscellaneous notes
the exporting driver to create a dmabuf fd must provide a way to let
userspace control setting of O_CLOEXEC flag passed in to dma_buf_fd().
-- If an exporter needs to manually flush caches and hence needs to fake
- coherency for mmap support, it needs to be able to zap all the ptes pointing
- at the backing storage. Now linux mm needs a struct address_space associated
- with the struct file stored in vma->vm_file to do that with the function
- unmap_mapping_range. But the dma_buf framework only backs every dma_buf fd
- with the anon_file struct file, i.e. all dma_bufs share the same file.
-
- Hence exporters need to setup their own file (and address_space) association
- by setting vma->vm_file and adjusting vma->vm_pgoff in the dma_buf mmap
- callback. In the specific case of a gem driver the exporter could use the
- shmem file already provided by gem (and set vm_pgoff = 0). Exporters can then
- zap ptes by unmapping the corresponding range of the struct address_space
- associated with their own file.
-
References:
[1] struct dma_buf_ops in include/linux/dma-buf.h
[2] All interfaces mentioned above defined in include/linux/dma-buf.h
diff --git a/Documentation/driver-api/dma-buf.rst b/Documentation/driver-api/dma-buf.rst
index 906d1532efad..92e417035e16 100644
--- a/Documentation/driver-api/dma-buf.rst
+++ b/Documentation/driver-api/dma-buf.rst
@@ -52,6 +52,12 @@ Basic Operation and Device DMA Access
.. kernel-doc:: drivers/dma-buf/dma-buf.c
:doc: dma buf device access
+CPU Access to DMA Buffer Objects
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. kernel-doc:: drivers/dma-buf/dma-buf.c
+ :doc: cpu access
+
Kernel Functions and Structures Reference
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index 09f948fd62ad..eae0846cbd95 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -640,6 +640,122 @@ void dma_buf_unmap_attachment(struct dma_buf_attachment *attach,
}
EXPORT_SYMBOL_GPL(dma_buf_unmap_attachment);
+/**
+ * DOC: cpu access
+ *
+ * There are mutliple reasons for supporting CPU access to a dma buffer object:
+ *
+ * - Fallback operations in the kernel, for example when a device is connected
+ * over USB and the kernel needs to shuffle the data around first before
+ * sending it away. Cache coherency is handled by braketing any transactions
+ * with calls to dma_buf_begin_cpu_access() and dma_buf_end_cpu_access()
+ * access.
+ *
+ * To support dma_buf objects residing in highmem cpu access is page-based
+ * using an api similar to kmap. Accessing a dma_buf is done in aligned chunks
+ * of PAGE_SIZE size. Before accessing a chunk it needs to be mapped, which
+ * returns a pointer in kernel virtual address space. Afterwards the chunk
+ * needs to be unmapped again. There is no limit on how often a given chunk
+ * can be mapped and unmapped, i.e. the importer does not need to call
+ * begin_cpu_access again before mapping the same chunk again.
+ *
+ * Interfaces::
+ * void \*dma_buf_kmap(struct dma_buf \*, unsigned long);
+ * void dma_buf_kunmap(struct dma_buf \*, unsigned long, void \*);
+ *
+ * There are also atomic variants of these interfaces. Like for kmap they
+ * facilitate non-blocking fast-paths. Neither the importer nor the exporter
+ * (in the callback) is allowed to block when using these.
+ *
+ * Interfaces::
+ * void \*dma_buf_kmap_atomic(struct dma_buf \*, unsigned long);
+ * void dma_buf_kunmap_atomic(struct dma_buf \*, unsigned long, void \*);
+ *
+ * For importers all the restrictions of using kmap apply, like the limited
+ * supply of kmap_atomic slots. Hence an importer shall only hold onto at
+ * max 2 atomic dma_buf kmaps at the same time (in any given process context).
+ *
+ * dma_buf kmap calls outside of the range specified in begin_cpu_access are
+ * undefined. If the range is not PAGE_SIZE aligned, kmap needs to succeed on
+ * the partial chunks at the beginning and end but may return stale or bogus
+ * data outside of the range (in these partial chunks).
+ *
+ * Note that these calls need to always succeed. The exporter needs to
+ * complete any preparations that might fail in begin_cpu_access.
+ *
+ * For some cases the overhead of kmap can be too high, a vmap interface
+ * is introduced. This interface should be used very carefully, as vmalloc
+ * space is a limited resources on many architectures.
+ *
+ * Interfaces::
+ * void \*dma_buf_vmap(struct dma_buf \*dmabuf)
+ * void dma_buf_vunmap(struct dma_buf \*dmabuf, void \*vaddr)
+ *
+ * The vmap call can fail if there is no vmap support in the exporter, or if
+ * it runs out of vmalloc space. Fallback to kmap should be implemented. Note
+ * that the dma-buf layer keeps a reference count for all vmap access and
+ * calls down into the exporter's vmap function only when no vmapping exists,
+ * and only unmaps it once. Protection against concurrent vmap/vunmap calls is
+ * provided by taking the dma_buf->lock mutex.
+ *
+ * - For full compatibility on the importer side with existing userspace
+ * interfaces, which might already support mmap'ing buffers. This is needed in
+ * many processing pipelines (e.g. feeding a software rendered image into a
+ * hardware pipeline, thumbnail creation, snapshots, ...). Also, Android's ION
+ * framework already supported this and for DMA buffer file descriptors to
+ * replace ION buffers mmap support was needed.
+ *
+ * There is no special interfaces, userspace simply calls mmap on the dma-buf
+ * fd. But like for CPU access there's a need to braket the actual access,
+ * which is handled by the ioctl (DMA_BUF_IOCTL_SYNC). Note that
+ * DMA_BUF_IOCTL_SYNC can fail with -EAGAIN or -EINTR, in which case it must
+ * be restarted.
+ *
+ * Some systems might need some sort of cache coherency management e.g. when
+ * CPU and GPU domains are being accessed through dma-buf at the same time.
+ * To circumvent this problem there are begin/end coherency markers, that
+ * forward directly to existing dma-buf device drivers vfunc hooks. Userspace
+ * can make use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The
+ * sequence would be used like following:
+ *
+ * - mmap dma-buf fd
+ * - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
+ * to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
+ * want (with the new data being consumed by say the GPU or the scanout
+ * device)
+ * - munmap once you don't need the buffer any more
+ *
+ * For correctness and optimal performance, it is always required to use
+ * SYNC_START and SYNC_END before and after, respectively, when accessing the
+ * mapped address. Userspace cannot rely on coherent access, even when there
+ * are systems where it just works without calling these ioctls.
+ *
+ * - And as a CPU fallback in userspace processing pipelines.
+ *
+ * Similar to the motivation for kernel cpu access it is again important that
+ * the userspace code of a given importing subsystem can use the same
+ * interfaces with a imported dma-buf buffer object as with a native buffer
+ * object. This is especially important for drm where the userspace part of
+ * contemporary OpenGL, X, and other drivers is huge, and reworking them to
+ * use a different way to mmap a buffer rather invasive.
+ *
+ * The assumption in the current dma-buf interfaces is that redirecting the
+ * initial mmap is all that's needed. A survey of some of the existing
+ * subsystems shows that no driver seems to do any nefarious thing like
+ * syncing up with outstanding asynchronous processing on the device or
+ * allocating special resources at fault time. So hopefully this is good
+ * enough, since adding interfaces to intercept pagefaults and allow pte
+ * shootdowns would increase the complexity quite a bit.
+ *
+ * Interface::
+ * int dma_buf_mmap(struct dma_buf \*, struct vm_area_struct \*,
+ * unsigned long);
+ *
+ * If the importing subsystem simply provides a special-purpose mmap call to
+ * set up a mapping in userspace, calling do_mmap with dma_buf->file will
+ * equally achieve that for a dma-buf object.
+ */
+
static int __dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
enum dma_data_direction direction)
{
@@ -665,6 +781,10 @@ static int __dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
* @dmabuf: [in] buffer to prepare cpu access for.
* @direction: [in] length of range for cpu access.
*
+ * After the cpu access is complete the caller should call
+ * dma_buf_end_cpu_access(). Only when cpu access is braketed by both calls is
+ * it guaranteed to be coherent with other DMA access.
+ *
* Can return negative error values, returns 0 on success.
*/
int dma_buf_begin_cpu_access(struct dma_buf *dmabuf,
@@ -697,6 +817,8 @@ EXPORT_SYMBOL_GPL(dma_buf_begin_cpu_access);
* @dmabuf: [in] buffer to complete cpu access for.
* @direction: [in] length of range for cpu access.
*
+ * This terminates CPU access started with dma_buf_begin_cpu_access().
+ *
* Can return negative error values, returns 0 on success.
*/
int dma_buf_end_cpu_access(struct dma_buf *dmabuf,
diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
index 6df170fb243f..57828154e440 100644
--- a/include/linux/dma-buf.h
+++ b/include/linux/dma-buf.h
@@ -39,10 +39,6 @@ struct dma_buf_attachment;
/**
* struct dma_buf_ops - operations possible on struct dma_buf
- * @begin_cpu_access: [optional] called before cpu access to invalidate cpu
- * caches and allocate backing storage (if not yet done)
- * respectively pin the object into memory.
- * @end_cpu_access: [optional] called after cpu access to flush caches.
* @kmap_atomic: maps a page from the buffer into kernel address
* space, users may not block until the subsequent unmap call.
* This callback must not sleep.
@@ -50,10 +46,6 @@ struct dma_buf_attachment;
* This Callback must not sleep.
* @kmap: maps a page from the buffer into kernel address space.
* @kunmap: [optional] unmaps a page from the buffer.
- * @mmap: used to expose the backing storage to userspace. Note that the
- * mapping needs to be coherent - if the exporter doesn't directly
- * support this, it needs to fake coherency by shooting down any ptes
- * when transitioning away from the cpu domain.
* @vmap: [optional] creates a virtual mapping for the buffer into kernel
* address space. Same restrictions as for vmap and friends apply.
* @vunmap: [optional] unmaps a vmap from the buffer
@@ -164,13 +156,96 @@ struct dma_buf_ops {
*/
void (*release)(struct dma_buf *);
+ /**
+ * @begin_cpu_access:
+ *
+ * This is called from dma_buf_begin_cpu_access() and allows the
+ * exporter to ensure that the memory is actually available for cpu
+ * access - the exporter might need to allocate or swap-in and pin the
+ * backing storage. The exporter also needs to ensure that cpu access is
+ * coherent for the access direction. The direction can be used by the
+ * exporter to optimize the cache flushing, i.e. access with a different
+ * direction (read instead of write) might return stale or even bogus
+ * data (e.g. when the exporter needs to copy the data to temporary
+ * storage).
+ *
+ * This callback is optional.
+ *
+ * FIXME: This is both called through the DMA_BUF_IOCTL_SYNC command
+ * from userspace (where storage shouldn't be pinned to avoid handing
+ * de-factor mlock rights to userspace) and for the kernel-internal
+ * users of the various kmap interfaces, where the backing storage must
+ * be pinned to guarantee that the atomic kmap calls can succeed. Since
+ * there's no in-kernel users of the kmap interfaces yet this isn't a
+ * real problem.
+ *
+ * Returns:
+ *
+ * 0 on success or a negative error code on failure. This can for
+ * example fail when the backing storage can't be allocated. Can also
+ * return -ERESTARTSYS or -EINTR when the call has been interrupted and
+ * needs to be restarted.
+ */
int (*begin_cpu_access)(struct dma_buf *, enum dma_data_direction);
+
+ /**
+ * @end_cpu_access:
+ *
+ * This is called from dma_buf_end_cpu_access() when the importer is
+ * done accessing the CPU. The exporter can use this to flush caches and
+ * unpin any resources pinned in @begin_cpu_access.
+ * The result of any dma_buf kmap calls after end_cpu_access is
+ * undefined.
+ *
+ * This callback is optional.
+ *
+ * Returns:
+ *
+ * 0 on success or a negative error code on failure. Can return
+ * -ERESTARTSYS or -EINTR when the call has been interrupted and needs
+ * to be restarted.
+ */
int (*end_cpu_access)(struct dma_buf *, enum dma_data_direction);
void *(*kmap_atomic)(struct dma_buf *, unsigned long);
void (*kunmap_atomic)(struct dma_buf *, unsigned long, void *);
void *(*kmap)(struct dma_buf *, unsigned long);
void (*kunmap)(struct dma_buf *, unsigned long, void *);
+ /**
+ * @mmap:
+ *
+ * This callback is used by the dma_buf_mmap() function
+ *
+ * Note that the mapping needs to be incoherent, userspace is expected
+ * to braket CPU access using the DMA_BUF_IOCTL_SYNC interface.
+ *
+ * Because dma-buf buffers have invariant size over their lifetime, the
+ * dma-buf core checks whether a vma is too large and rejects such
+ * mappings. The exporter hence does not need to duplicate this check.
+ * Drivers do not need to check this themselves.
+ *
+ * If an exporter needs to manually flush caches and hence needs to fake
+ * coherency for mmap support, it needs to be able to zap all the ptes
+ * pointing at the backing storage. Now linux mm needs a struct
+ * address_space associated with the struct file stored in vma->vm_file
+ * to do that with the function unmap_mapping_range. But the dma_buf
+ * framework only backs every dma_buf fd with the anon_file struct file,
+ * i.e. all dma_bufs share the same file.
+ *
+ * Hence exporters need to setup their own file (and address_space)
+ * association by setting vma->vm_file and adjusting vma->vm_pgoff in
+ * the dma_buf mmap callback. In the specific case of a gem driver the
+ * exporter could use the shmem file already provided by gem (and set
+ * vm_pgoff = 0). Exporters can then zap ptes by unmapping the
+ * corresponding range of the struct address_space associated with their
+ * own file.
+ *
+ * This callback is optional.
+ *
+ * Returns:
+ *
+ * 0 on success or a negative error code on failure.
+ */
int (*mmap)(struct dma_buf *, struct vm_area_struct *vma);
void *(*vmap)(struct dma_buf *);