summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.txt142
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic.yaml144
-rw-r--r--Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt28
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.txt73
-rw-r--r--Documentation/devicetree/bindings/arm/atmel-at91.yaml134
-rw-r--r--Documentation/devicetree/bindings/arm/emtrion.txt12
-rw-r--r--Documentation/devicetree/bindings/arm/fsl.yaml44
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.txt89
-rw-r--r--Documentation/devicetree/bindings/arm/mediatek.yaml91
-rw-r--r--Documentation/devicetree/bindings/arm/omap/omap.txt3
-rw-r--r--Documentation/devicetree/bindings/arm/renesas.yaml8
-rw-r--r--Documentation/devicetree/bindings/arm/rockchip.yaml13
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/stm32.txt10
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/stm32.yaml31
-rw-r--r--Documentation/devicetree/bindings/arm/sunxi.yaml2
-rw-r--r--Documentation/devicetree/bindings/arm/ti/k3.txt3
-rw-r--r--Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml79
-rw-r--r--Documentation/devicetree/bindings/bus/sunxi-rsb.txt47
-rw-r--r--Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-qdma.txt1
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt1
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt1
-rw-r--r--Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt1
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_can.txt13
-rw-r--r--Documentation/devicetree/bindings/net/can/rcar_canfd.txt16
-rw-r--r--Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml57
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-sun4i.txt24
-rw-r--r--Documentation/devicetree/bindings/serial/omap_serial.txt1
-rw-r--r--Documentation/devicetree/bindings/timer/renesas,cmt.txt6
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml6
-rw-r--r--arch/arm/boot/dts/Makefile10
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir2110.dts14
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir3220.dts14
-rw-r--r--arch/arm/boot/dts/am335x-baltos-ir5221.dts13
-rw-r--r--arch/arm/boot/dts/am335x-pcm-953.dtsi22
-rw-r--r--arch/arm/boot/dts/am335x-phycore-rdk.dts4
-rw-r--r--arch/arm/boot/dts/am335x-phycore-som.dtsi47
-rw-r--r--arch/arm/boot/dts/am335x-regor-rdk.dts24
-rw-r--r--arch/arm/boot/dts/am335x-regor.dtsi223
-rw-r--r--arch/arm/boot/dts/am335x-wega-rdk.dts4
-rw-r--r--arch/arm/boot/dts/am335x-wega.dtsi16
-rw-r--r--arch/arm/boot/dts/arm-realview-eb.dtsi6
-rw-r--r--arch/arm/boot/dts/arm-realview-pb1176.dts6
-rw-r--r--arch/arm/boot/dts/arm-realview-pb11mp.dts6
-rw-r--r--arch/arm/boot/dts/arm-realview-pbx.dtsi6
-rw-r--r--arch/arm/boot/dts/armada-370-netgear-rn104.dts14
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts8
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts160
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts846
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts566
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts207
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts2
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts22
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts14
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-swift.dts966
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts224
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts14
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts123
-rw-r--r--arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts5
-rw-r--r--arch/arm/boot/dts/aspeed-g4.dtsi8
-rw-r--r--arch/arm/boot/dts/aspeed-g5.dtsi11
-rw-r--r--arch/arm/boot/dts/at91-wb50n.dtsi2
-rw-r--r--arch/arm/boot/dts/at91sam9261ek.dts8
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi25
-rw-r--r--arch/arm/boot/dts/at91sam9rl.dtsi25
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi23
-rw-r--r--arch/arm/boot/dts/bcm-cygnus-clock.dtsi12
-rw-r--r--arch/arm/boot/dts/bcm-cygnus.dtsi6
-rw-r--r--arch/arm/boot/dts/bcm-nsp.dtsi9
-rw-r--r--arch/arm/boot/dts/bcm11351.dtsi12
-rw-r--r--arch/arm/boot/dts/bcm21664-garnet.dts2
-rw-r--r--arch/arm/boot/dts/bcm21664.dtsi10
-rw-r--r--arch/arm/boot/dts/bcm23550-sparrow.dts2
-rw-r--r--arch/arm/boot/dts/bcm23550.dtsi8
-rw-r--r--arch/arm/boot/dts/bcm28155-ap.dts2
-rw-r--r--arch/arm/boot/dts/bcm283x.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-netgear-r6250.dts2
-rw-r--r--arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts4
-rw-r--r--arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts4
-rw-r--r--arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-linksys-panamera.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-netgear-r8500.dts4
-rw-r--r--arch/arm/boot/dts/bcm47094-phicomm-k3.dts4
-rw-r--r--arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts4
-rw-r--r--arch/arm/boot/dts/bcm47189-luxul-xap-810.dts4
-rw-r--r--arch/arm/boot/dts/bcm47189-tenda-ac9.dts4
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi10
-rw-r--r--arch/arm/boot/dts/bcm53573.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm63138.dtsi9
-rw-r--r--arch/arm/boot/dts/bcm7445-bcm97445svmb.dts2
-rw-r--r--arch/arm/boot/dts/bcm7445.dtsi8
-rw-r--r--arch/arm/boot/dts/bcm911360_entphn.dts2
-rw-r--r--arch/arm/boot/dts/bcm947189acdbmr.dts4
-rw-r--r--arch/arm/boot/dts/bcm953012er.dts4
-rw-r--r--arch/arm/boot/dts/bcm953012k.dts2
-rw-r--r--arch/arm/boot/dts/bcm958522er.dts2
-rw-r--r--arch/arm/boot/dts/bcm958525er.dts2
-rw-r--r--arch/arm/boot/dts/bcm958525xmc.dts2
-rw-r--r--arch/arm/boot/dts/bcm958622hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm958623hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm958625hr.dts2
-rw-r--r--arch/arm/boot/dts/bcm958625k.dts2
-rw-r--r--arch/arm/boot/dts/bcm963138dvt.dts2
-rw-r--r--arch/arm/boot/dts/bcm988312hr.dts2
-rw-r--r--arch/arm/boot/dts/da850-evm.dts13
-rw-r--r--arch/arm/boot/dts/da850-lcdk.dts36
-rw-r--r--arch/arm/boot/dts/da850-lego-ev3.dts30
-rw-r--r--arch/arm/boot/dts/da850.dtsi50
-rw-r--r--arch/arm/boot/dts/emev2-kzm9d.dts2
-rw-r--r--arch/arm/boot/dts/exynos3250-artik5.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos3250-monk.dts5
-rw-r--r--arch/arm/boot/dts/exynos3250-rinato.dts5
-rw-r--r--arch/arm/boot/dts/exynos3250.dtsi33
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi16
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts5
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts4
-rw-r--r--arch/arm/boot/dts/exynos4210-universal_c210.dts5
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi51
-rw-r--r--arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi32
-rw-r--r--arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos4412-midas.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi5
-rw-r--r--arch/arm/boot/dts/exynos4412-prime.dtsi7
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi49
-rw-r--r--arch/arm/boot/dts/exynos5410-odroidxu.dts5
-rw-r--r--arch/arm/boot/dts/exynos5410.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos5420-arndale-octa.dts102
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi234
-rw-r--r--arch/arm/boot/dts/exynos5422-odroid-core.dtsi108
-rw-r--r--arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos54xx.dtsi9
-rw-r--r--arch/arm/boot/dts/gemini-dlink-dir-685.dts2
-rw-r--r--arch/arm/boot/dts/hip04.dtsi18
-rw-r--r--arch/arm/boot/dts/ibm-power9-dual.dtsi248
-rw-r--r--arch/arm/boot/dts/imx53-m53menlo.dts266
-rw-r--r--arch/arm/boot/dts/imx53-smd.dts73
-rw-r--r--arch/arm/boot/dts/imx53.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi36
-rw-r--r--arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi815
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabresd.dtsi16
-rw-r--r--arch/arm/boot/dts/imx6qdl.dtsi11
-rw-r--r--arch/arm/boot/dts/imx6sl-evk.dts12
-rw-r--r--arch/arm/boot/dts/imx6sl.dtsi12
-rw-r--r--arch/arm/boot/dts/imx6sll-evk.dts12
-rw-r--r--arch/arm/boot/dts/imx6sll.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb-reva.dts16
-rw-r--r--arch/arm/boot/dts/imx6sx-sdb.dts16
-rw-r--r--arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts39
-rw-r--r--arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts47
-rw-r--r--arch/arm/boot/dts/imx6sx-udoo-neo-full.dts47
-rw-r--r--arch/arm/boot/dts/imx6sx-udoo-neo.dtsi89
-rw-r--r--arch/arm/boot/dts/imx6sx.dtsi7
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi4
-rw-r--r--arch/arm/boot/dts/imx6ul-geam.dts2
-rw-r--r--arch/arm/boot/dts/imx6ul-isiot.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6ul.dtsi14
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi11
-rw-r--r--arch/arm/boot/dts/imx6ull-colibri.dtsi6
-rw-r--r--arch/arm/boot/dts/imx6ull.dtsi7
-rw-r--r--arch/arm/boot/dts/imx7d-meerkat96.dts375
-rw-r--r--arch/arm/boot/dts/imx7d-sdb.dts16
-rw-r--r--arch/arm/boot/dts/imx7d-zii-rpu2.dts16
-rw-r--r--arch/arm/boot/dts/imx7d.dtsi16
-rw-r--r--arch/arm/boot/dts/imx7s.dtsi11
-rw-r--r--arch/arm/boot/dts/imx7ulp-evk.dts55
-rw-r--r--arch/arm/boot/dts/imx7ulp.dtsi38
-rw-r--r--arch/arm/boot/dts/integrator.dtsi3
-rw-r--r--arch/arm/boot/dts/iwg20d-q7-common.dtsi2
-rw-r--r--arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts32
-rw-r--r--arch/arm/boot/dts/ls1021a-tsn.dts289
-rw-r--r--arch/arm/boot/dts/meson.dtsi44
-rw-r--r--arch/arm/boot/dts/meson6-atv1200.dts44
-rw-r--r--arch/arm/boot/dts/meson6.dtsi44
-rw-r--r--arch/arm/boot/dts/meson8-minix-neo-x8.dts39
-rw-r--r--arch/arm/boot/dts/meson8.dtsi64
-rw-r--r--arch/arm/boot/dts/meson8b-ec100.dts9
-rw-r--r--arch/arm/boot/dts/meson8b-mxq.dts182
-rw-r--r--arch/arm/boot/dts/meson8b-odroidc1.dts51
-rw-r--r--arch/arm/boot/dts/meson8b.dtsi64
-rw-r--r--arch/arm/boot/dts/meson8m2-mxiii-plus.dts17
-rw-r--r--arch/arm/boot/dts/meson8m2.dtsi10
-rw-r--r--arch/arm/boot/dts/omap4-l4.dtsi9
-rw-r--r--arch/arm/boot/dts/pxa300-raumfeld-common.dtsi6
-rw-r--r--arch/arm/boot/dts/pxa300-raumfeld-controller.dts21
-rw-r--r--arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts3
-rw-r--r--arch/arm/boot/dts/pxa3xx.dtsi8
-rw-r--r--arch/arm/boot/dts/qcom-apq8064.dtsi4
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts6
-rw-r--r--arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts156
-rw-r--r--arch/arm/boot/dts/qcom-msm8974.dtsi138
-rw-r--r--arch/arm/boot/dts/r7s72100-genmai.dts2
-rw-r--r--arch/arm/boot/dts/r7s72100-rskrza1.dts38
-rw-r--r--arch/arm/boot/dts/r7s72100.dtsi19
-rw-r--r--arch/arm/boot/dts/r7s9210-rza2mevb.dts161
-rw-r--r--arch/arm/boot/dts/r7s9210.dtsi286
-rw-r--r--arch/arm/boot/dts/r8a73a4-ape6evm.dts2
-rw-r--r--arch/arm/boot/dts/r8a7740-armadillo800eva.dts2
-rw-r--r--arch/arm/boot/dts/r8a7743-sk-rzg1m.dts2
-rw-r--r--arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts2
-rw-r--r--arch/arm/boot/dts/r8a7745-sk-rzg1e.dts2
-rw-r--r--arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts4
-rw-r--r--arch/arm/boot/dts/r8a7778-bockw.dts2
-rw-r--r--arch/arm/boot/dts/r8a7779-marzen.dts2
-rw-r--r--arch/arm/boot/dts/r8a7790-lager.dts9
-rw-r--r--arch/arm/boot/dts/r8a7790-stout.dts9
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts9
-rw-r--r--arch/arm/boot/dts/r8a7791-porter.dts9
-rw-r--r--arch/arm/boot/dts/r8a7792-blanche.dts9
-rw-r--r--arch/arm/boot/dts/r8a7792-wheat.dts2
-rw-r--r--arch/arm/boot/dts/r8a7792.dtsi34
-rw-r--r--arch/arm/boot/dts/r8a7793-gose.dts9
-rw-r--r--arch/arm/boot/dts/r8a7794-alt.dts2
-rw-r--r--arch/arm/boot/dts/r8a7794-silk.dts2
-rw-r--r--arch/arm/boot/dts/rk322x.dtsi85
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi29
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jaq.dts207
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-jerry.dts207
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-mickey.dts234
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-minnie.dts256
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-pinky.dts2
-rw-r--r--arch/arm/boot/dts/rk3288-veyron-speedy.dts219
-rw-r--r--arch/arm/boot/dts/rk3288-veyron.dtsi76
-rw-r--r--arch/arm/boot/dts/rk3288.dtsi30
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi27
-rw-r--r--arch/arm/boot/dts/sh73a0-kzm9g.dts2
-rw-r--r--arch/arm/boot/dts/socfpga_arria10.dtsi21
-rw-r--r--arch/arm/boot/dts/socfpga_arria10_socdk.dtsi19
-rw-r--r--arch/arm/boot/dts/stm32746g-eval.dts66
-rw-r--r--arch/arm/boot/dts/stm32mp157-pinctrl.dtsi246
-rw-r--r--arch/arm/boot/dts/stm32mp157a-avenger96.dts321
-rw-r--r--arch/arm/boot/dts/stm32mp157a-dk1.dts70
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ed1.dts18
-rw-r--r--arch/arm/boot/dts/stm32mp157c-ev1.dts125
-rw-r--r--arch/arm/boot/dts/stm32mp157c.dtsi180
-rw-r--r--arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi90
-rw-r--r--arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi62
-rw-r--r--arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi78
-rw-r--r--arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi62
-rw-r--r--arch/arm/boot/dts/sun5i-gr8-evb.dts2
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi25
-rw-r--r--arch/arm/boot/dts/sun7i-a20-icnova-swac.dts3
-rw-r--r--arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts8
-rw-r--r--arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-a83t.dtsi29
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-h3-beelink-x2.dts4
-rw-r--r--arch/arm/boot/dts/sun8i-h3-orangepi-one.dts3
-rw-r--r--arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts7
-rw-r--r--arch/arm/boot/dts/sun8i-r40.dtsi3
-rw-r--r--arch/arm/boot/dts/sun8i-v3s.dtsi13
-rw-r--r--arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts123
-rw-r--r--arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi3
-rw-r--r--arch/arm/boot/dts/uniphier-ld4-ref.dts4
-rw-r--r--arch/arm/boot/dts/uniphier-ld4.dtsi4
-rw-r--r--arch/arm/boot/dts/uniphier-ld6b-ref.dts4
-rw-r--r--arch/arm/boot/dts/uniphier-pro4-ref.dts4
-rw-r--r--arch/arm/boot/dts/uniphier-pro4.dtsi2
-rw-r--r--arch/arm/boot/dts/uniphier-pro5.dtsi4
-rw-r--r--arch/arm/boot/dts/uniphier-pxs2.dtsi4
-rw-r--r--arch/arm/boot/dts/uniphier-sld8-ref.dts4
-rw-r--r--arch/arm/boot/dts/uniphier-sld8.dtsi4
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts3
-rw-r--r--arch/arm/boot/dts/vexpress-v2m-rs1.dtsi5
-rw-r--r--arch/arm/boot/dts/vexpress-v2m.dtsi3
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts13
-rw-r--r--arch/arm/boot/dts/vf610-zii-dev.dtsi52
-rw-r--r--arch/arm/configs/davinci_all_defconfig1
-rw-r--r--arch/arm64/boot/dts/allwinner/axp803.dtsi6
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts25
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts7
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts6
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts23
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts23
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts2
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts44
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi22
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts3
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts3
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts12
-rw-r--r--arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi28
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi10
-rw-r--r--arch/arm64/boot/dts/amlogic/Makefile1
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg-s400.dts4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-axg.dtsi35
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts401
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts122
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts257
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a.dtsi1799
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts386
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b.dtsi82
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts15
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts10
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts15
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts9
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi106
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi37
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi35
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts13
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts14
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxl.dtsi35
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts38
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts12
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts13
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts14
-rw-r--r--arch/arm64/boot/dts/arm/juno-base.dtsi6
-rw-r--r--arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi4
-rw-r--r--arch/arm64/boot/dts/arm/juno-motherboard.dtsi4
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi72
-rw-r--r--arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi108
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi5
-rw-r--r--arch/arm64/boot/dts/exynos/exynos5433.dtsi51
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7-espresso.dts5
-rw-r--r--arch/arm64/boot/dts/exynos/exynos7.dtsi11
-rw-r--r--arch/arm64/boot/dts/freescale/Makefile1
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts20
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts20
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi136
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm-evk.dts190
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mm.dtsi151
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-evk.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts809
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi62
-rw-r--r--arch/arm64/boot/dts/freescale/imx8qxp.dtsi134
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi456
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi3660.dtsi2
-rw-r--r--arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi6
-rw-r--r--arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts18
-rw-r--r--arch/arm64/boot/dts/marvell/armada-7040-db.dts28
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts1
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-db.dts7
-rw-r--r--arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi2
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi5
-rw-r--r--arch/arm64/boot/dts/marvell/armada-ap806.dtsi118
-rw-r--r--arch/arm64/boot/dts/marvell/armada-cp110.dtsi2
-rw-r--r--arch/arm64/boot/dts/mediatek/Makefile1
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183-evb.dts140
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8183.dtsi447
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts75
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi53
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra186.dtsi176
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi4
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts55
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra194.dtsi509
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi16
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts13
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts52
-rw-r--r--arch/arm64/boot/dts/nvidia/tegra210.dtsi22
-rw-r--r--arch/arm64/boot/dts/qcom/Makefile4
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi17
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi59
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi185
-rw-r--r--arch/arm64/boot/dts/qcom/pm8998.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/pms405.dtsi20
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404-evb.dtsi43
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404.dtsi636
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts238
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts238
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts174
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi1326
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-db845c.dts557
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845-mtp.dts4
-rw-r--r--arch/arm64/boot/dts/qcom/sdm845.dtsi283
-rw-r--r--arch/arm64/boot/dts/renesas/Makefile2
-rw-r--r--arch/arm64/boot/dts/renesas/hihope-common.dtsi325
-rw-r--r--arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi63
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts15
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts26
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774a1.dtsi527
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts246
-rw-r--r--arch/arm64/boot/dts/renesas/r8a774c0.dtsi12
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7795.dtsi93
-rw-r--r--arch/arm64/boot/dts/renesas/r8a7796.dtsi71
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77965.dtsi45
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77970-eagle.dts2
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts3
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77990.dtsi32
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995-draak.dts9
-rw-r--r--arch/arm64/boot/dts/renesas/r8a77995.dtsi10
-rw-r--r--arch/arm64/boot/dts/renesas/salvator-common.dtsi2
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb-kf.dtsi49
-rw-r--r--arch/arm64/boot/dts/renesas/ulcb.dtsi2
-rw-r--r--arch/arm64/boot/dts/rockchip/Makefile4
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts4
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3328.dtsi1
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-ficus.dts6
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts733
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts27
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts27
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts13
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi804
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts101
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rock960.dts49
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts18
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi5
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399.dtsi23
-rw-r--r--arch/arm64/boot/dts/rockchip/rk3399pro.dtsi22
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts4
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi15
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi15
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts4
-rw-r--r--arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi15
-rw-r--r--arch/arm64/boot/dts/sprd/sc9836.dtsi2
-rw-r--r--arch/arm64/boot/dts/sprd/sc9860.dtsi8
-rw-r--r--arch/arm64/boot/dts/sprd/whale2.dtsi35
-rw-r--r--arch/arm64/boot/dts/ti/Makefile2
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-main.dtsi201
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi8
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi28
-rw-r--r--arch/arm64/boot/dts/ti/k3-am65.dtsi8
-rw-r--r--arch/arm64/boot/dts/ti/k3-am654-base-board.dts51
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts50
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-main.dtsi243
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi90
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi29
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721e.dtsi177
-rw-r--r--arch/arm64/configs/defconfig1
-rw-r--r--drivers/soc/ti/Kconfig5
-rw-r--r--include/dt-bindings/gpio/tegra186-gpio.h41
445 files changed, 26648 insertions, 2390 deletions
diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt
deleted file mode 100644
index 061f7b98a07f..000000000000
--- a/Documentation/devicetree/bindings/arm/amlogic.txt
+++ /dev/null
@@ -1,142 +0,0 @@
-Amlogic MesonX device tree bindings
--------------------------------------------
-
-Work in progress statement:
-
-Device tree files and bindings applying to Amlogic SoCs and boards are
-considered "unstable". Any Amlogic device tree binding may change at
-any time. Be sure to use a device tree binary and a kernel image
-generated from the same source tree.
-
-Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
-stable binding/ABI.
-
----------------------------------------------------------------
-
-Boards with the Amlogic Meson6 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson6"
-
-Boards with the Amlogic Meson8 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson8";
-
-Boards with the Amlogic Meson8b SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson8b";
-
-Boards with the Amlogic Meson8m2 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson8m2";
-
-Boards with the Amlogic Meson GXBaby SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,meson-gxbb";
-
-Boards with the Amlogic Meson GXL S905X SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s905x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s905d", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s805x", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s905w", "amlogic,meson-gxl";
-
-Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,s912", "amlogic,meson-gxm";
-
-Boards with the Amlogic Meson AXG A113D SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,a113d", "amlogic,meson-axg";
-
-Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
- Required root node property:
- compatible: "amlogic,g12a";
-
-Board compatible values (alphabetically, grouped by SoC):
-
- - "geniatech,atv1200" (Meson6)
-
- - "minix,neo-x8" (Meson8)
-
- - "endless,ec100" (Meson8b)
- - "hardkernel,odroid-c1" (Meson8b)
- - "tronfy,mxq" (Meson8b)
-
- - "tronsmart,mxiii-plus" (Meson8m2)
-
- - "amlogic,p200" (Meson gxbb)
- - "amlogic,p201" (Meson gxbb)
- - "friendlyarm,nanopi-k2" (Meson gxbb)
- - "hardkernel,odroid-c2" (Meson gxbb)
- - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
- - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
- - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
- - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
- - "wetek,hub" (Meson gxbb)
- - "wetek,play2" (Meson gxbb)
-
- - "amlogic,p212" (Meson gxl s905x)
- - "hwacom,amazetv" (Meson gxl s905x)
- - "khadas,vim" (Meson gxl s905x)
- - "libretech,cc" (Meson gxl s905x)
-
- - "amlogic,p230" (Meson gxl s905d)
- - "amlogic,p231" (Meson gxl s905d)
- - "phicomm,n1" (Meson gxl s905d)
-
- - "amlogic,p241" (Meson gxl s805x)
- - "libretech,aml-s805x-ac" (Meson gxl s805x)
-
- - "amlogic,p281" (Meson gxl s905w)
- - "oranth,tx3-mini" (Meson gxl s905w)
-
- - "amlogic,q200" (Meson gxm s912)
- - "amlogic,q201" (Meson gxm s912)
- - "khadas,vim2" (Meson gxm s912)
- - "kingnovel,r-box-pro" (Meson gxm S912)
- - "nexbox,a1" (Meson gxm s912)
- - "tronsmart,vega-s96" (Meson gxm s912)
-
- - "amlogic,s400" (Meson axg a113d)
-
- - "amlogic,u200" (Meson g12a s905d2)
- - "amediatech,x96-max" (Meson g12a s905x2)
- - "seirobotics,sei510" (Meson g12a s905x2)
-
-Amlogic Meson Firmware registers Interface
-------------------------------------------
-
-The Meson SoCs have a register bank with status and data shared with the
-secure firmware.
-
-Required properties:
- - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
-
-Properties should indentify components of this register interface :
-
-Meson GX SoC Information
-------------------------
-A firmware register encodes the SoC type, package and revision information on
-the Meson GX SoCs.
-If present, the following property should be added :
-
-Optional properties:
- - amlogic,has-chip-id: If present, the interface gives the current SoC version.
-
-Example
--------
-
-ao-secure@140 {
- compatible = "amlogic,meson-gx-ao-secure", "syscon";
- reg = <0x0 0x140 0x0 0x140>;
- amlogic,has-chip-id;
-};
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
new file mode 100644
index 000000000000..325c6fd3566d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -0,0 +1,144 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/amlogic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic MesonX device tree bindings
+
+maintainers:
+ - Kevin Hilman <khilman@baylibre.com>
+
+description: |+
+ Work in progress statement:
+
+ Device tree files and bindings applying to Amlogic SoCs and boards are
+ considered "unstable". Any Amlogic device tree binding may change at
+ any time. Be sure to use a device tree binary and a kernel image
+ generated from the same source tree.
+
+ Please refer to Documentation/devicetree/bindings/ABI.txt for a definition of a
+ stable binding/ABI.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - description: Boards with the Amlogic Meson6 SoC
+ items:
+ - enum:
+ - geniatech,atv1200
+ - const: amlogic,meson6
+
+ - description: Boards with the Amlogic Meson8 SoC
+ items:
+ - enum:
+ - minix,neo-x8
+ - const: amlogic,meson8
+
+ - description: Boards with the Amlogic Meson8m2 SoC
+ items:
+ - enum:
+ - tronsmart,mxiii-plus
+ - const: amlogic,meson8m2
+
+ - description: Boards with the Amlogic Meson8b SoC
+ items:
+ - enum:
+ - endless,ec100
+ - hardkernel,odroid-c1
+ - tronfy,mxq
+ - const: amlogic,meson8b
+
+ - description: Boards with the Amlogic Meson GXBaby SoC
+ items:
+ - enum:
+ - amlogic,p200
+ - amlogic,p201
+ - friendlyarm,nanopi-k2
+ - hardkernel,odroid-c2
+ - nexbox,a95x
+ - wetek,hub
+ - wetek,play2
+ - const: amlogic,meson-gxbb
+
+ - description: Tronsmart Vega S95 devices
+ items:
+ - enum:
+ - tronsmart,vega-s95-pro
+ - tronsmart,vega-s95-meta
+ - tronsmart,vega-s95-telos
+ - const: tronsmart,vega-s95
+ - const: amlogic,meson-gxbb
+
+ - description: Boards with the Amlogic Meson GXL S805X SoC
+ items:
+ - enum:
+ - amlogic,p241
+ - libretech,aml-s805x-ac
+ - const: amlogic,s805x
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXL S905W SoC
+ items:
+ - enum:
+ - amlogic,p281
+ - oranth,tx3-mini
+ - const: amlogic,s905w
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXL S905X SoC
+ items:
+ - enum:
+ - amediatech,x96-max
+ - amlogic,p212
+ - hwacom,amazetv
+ - khadas,vim
+ - libretech,cc
+ - nexbox,a95x
+ - seirobotics,sei510
+ - const: amlogic,s905x
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXL S905D SoC
+ items:
+ - enum:
+ - amlogic,p230
+ - amlogic,p231
+ - phicomm,n1
+ - const: amlogic,s905d
+ - const: amlogic,meson-gxl
+
+ - description: Boards with the Amlogic Meson GXM S912 SoC
+ items:
+ - enum:
+ - amlogic,q200
+ - amlogic,q201
+ - khadas,vim2
+ - kingnovel,r-box-pro
+ - nexbox,a1
+ - tronsmart,vega-s96
+ - const: amlogic,s912
+ - const: amlogic,meson-gxm
+
+ - description: Boards with the Amlogic Meson AXG A113D SoC
+ items:
+ - enum:
+ - amlogic,s400
+ - const: amlogic,a113d
+ - const: amlogic,meson-axg
+
+ - description: Boards with the Amlogic Meson G12A S905D2 SoC
+ items:
+ - enum:
+ - amlogic,u200
+ - const: amlogic,g12a
+
+ - description: Boards with the Amlogic Meson G12B S922X SoC
+ items:
+ - enum:
+ - hardkernel,odroid-n2
+ - const: amlogic,g12b
+
+...
diff --git a/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
new file mode 100644
index 000000000000..c67d9f48fb91
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
@@ -0,0 +1,28 @@
+Amlogic Meson Firmware registers Interface
+------------------------------------------
+
+The Meson SoCs have a register bank with status and data shared with the
+secure firmware.
+
+Required properties:
+ - compatible: For Meson GX SoCs, must be "amlogic,meson-gx-ao-secure", "syscon"
+
+Properties should indentify components of this register interface :
+
+Meson GX SoC Information
+------------------------
+A firmware register encodes the SoC type, package and revision information on
+the Meson GX SoCs.
+If present, the following property should be added :
+
+Optional properties:
+ - amlogic,has-chip-id: If present, the interface gives the current SoC version.
+
+Example
+-------
+
+ao-secure@140 {
+ compatible = "amlogic,meson-gx-ao-secure", "syscon";
+ reg = <0x0 0x140 0x0 0x140>;
+ amlogic,has-chip-id;
+};
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
deleted file mode 100644
index 99dee23c74a4..000000000000
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ /dev/null
@@ -1,73 +0,0 @@
-Atmel AT91 device tree bindings.
-================================
-
-Boards with a SoC of the Atmel AT91 or SMART family shall have the following
-properties:
-
-Required root node properties:
-compatible: must be one of:
- * "atmel,at91rm9200"
-
- * "atmel,at91sam9" for SoCs using an ARM926EJ-S core, shall be extended with
- the specific SoC family or compatible:
- o "atmel,at91sam9260"
- o "atmel,at91sam9261"
- o "atmel,at91sam9263"
- o "atmel,at91sam9x5" for the 5 series, shall be extended with the specific
- SoC compatible:
- - "atmel,at91sam9g15"
- - "atmel,at91sam9g25"
- - "atmel,at91sam9g35"
- - "atmel,at91sam9x25"
- - "atmel,at91sam9x35"
- o "atmel,at91sam9g20"
- o "atmel,at91sam9g45"
- o "atmel,at91sam9n12"
- o "atmel,at91sam9rl"
- o "atmel,at91sam9xe"
- o "microchip,sam9x60"
- * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
- SoC family:
- o "atmel,sama5d2" shall be extended with the specific SoC compatible:
- - "atmel,sama5d27"
- o "atmel,sama5d3" shall be extended with the specific SoC compatible:
- - "atmel,sama5d31"
- - "atmel,sama5d33"
- - "atmel,sama5d34"
- - "atmel,sama5d35"
- - "atmel,sama5d36"
- o "atmel,sama5d4" shall be extended with the specific SoC compatible:
- - "atmel,sama5d41"
- - "atmel,sama5d42"
- - "atmel,sama5d43"
- - "atmel,sama5d44"
-
- * "atmel,samv7" for MCUs using a Cortex-M7, shall be extended with the specific
- SoC family:
- o "atmel,sams70" shall be extended with the specific MCU compatible:
- - "atmel,sams70j19"
- - "atmel,sams70j20"
- - "atmel,sams70j21"
- - "atmel,sams70n19"
- - "atmel,sams70n20"
- - "atmel,sams70n21"
- - "atmel,sams70q19"
- - "atmel,sams70q20"
- - "atmel,sams70q21"
- o "atmel,samv70" shall be extended with the specific MCU compatible:
- - "atmel,samv70j19"
- - "atmel,samv70j20"
- - "atmel,samv70n19"
- - "atmel,samv70n20"
- - "atmel,samv70q19"
- - "atmel,samv70q20"
- o "atmel,samv71" shall be extended with the specific MCU compatible:
- - "atmel,samv71j19"
- - "atmel,samv71j20"
- - "atmel,samv71j21"
- - "atmel,samv71n19"
- - "atmel,samv71n20"
- - "atmel,samv71n21"
- - "atmel,samv71q19"
- - "atmel,samv71q20"
- - "atmel,samv71q21"
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.yaml b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
new file mode 100644
index 000000000000..6e168abcd4d1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/atmel-at91.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel AT91 device tree bindings.
+
+maintainers:
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - Ludovic Desroches <ludovic.desroches@microchip.com>
+
+description: |
+ Boards with a SoC of the Atmel AT91 or SMART family shall have the following
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - const: atmel,at91rm9200
+ - items:
+ - enum:
+ - olimex,sam9-l9260
+ - enum:
+ - atmel,at91sam9260
+ - atmel,at91sam9261
+ - atmel,at91sam9263
+ - atmel,at91sam9g20
+ - atmel,at91sam9g45
+ - atmel,at91sam9n12
+ - atmel,at91sam9rl
+ - atmel,at91sam9xe
+ - atmel,at91sam9x60
+ - const: atmel,at91sam9
+
+ - items:
+ - enum:
+ - atmel,at91sam9g15
+ - atmel,at91sam9g25
+ - atmel,at91sam9g35
+ - atmel,at91sam9x25
+ - atmel,at91sam9x35
+ - const: atmel,at91sam9x5
+ - const: atmel,at91sam9
+
+ - items:
+ - const: atmel,sama5d27
+ - const: atmel,sama5d2
+ - const: atmel,sama5
+
+ - description: Nattis v2 board with Natte v2 power board
+ items:
+ - const: axentia,nattis-2
+ - const: axentia,natte-2
+ - const: axentia,linea
+ - const: atmel,sama5d31
+ - const: atmel,sama5d3
+ - const: atmel,sama5
+
+ - description: TSE-850 v3 board
+ items:
+ - const: axentia,tse850v3
+ - const: axentia,linea
+ - const: atmel,sama5d31
+ - const: atmel,sama5d3
+ - const: atmel,sama5
+
+ - items:
+ - const: axentia,linea
+ - const: atmel,sama5d31
+ - const: atmel,sama5d3
+ - const: atmel,sama5
+
+ - items:
+ - enum:
+ - atmel,sama5d31
+ - atmel,sama5d33
+ - atmel,sama5d34
+ - atmel,sama5d35
+ - atmel,sama5d36
+ - const: atmel,sama5d3
+ - const: atmel,sama5
+
+ - items:
+ - enum:
+ - atmel,sama5d41
+ - atmel,sama5d42
+ - atmel,sama5d43
+ - atmel,sama5d44
+ - const: atmel,sama5d4
+ - const: atmel,sama5
+
+ - items:
+ - enum:
+ - atmel,sams70j19
+ - atmel,sams70j20
+ - atmel,sams70j21
+ - atmel,sams70n19
+ - atmel,sams70n20
+ - atmel,sams70n21
+ - atmel,sams70q19
+ - atmel,sams70q20
+ - atmel,sams70q21
+ - const: atmel,sams70
+ - const: atmel,samv7
+
+ - items:
+ - enum:
+ - atmel,samv70j19
+ - atmel,samv70j20
+ - atmel,samv70n19
+ - atmel,samv70n20
+ - atmel,samv70q19
+ - atmel,samv70q20
+ - const: atmel,samv70
+ - const: atmel,samv7
+
+ - items:
+ - enum:
+ - atmel,samv71j19
+ - atmel,samv71j20
+ - atmel,samv71j21
+ - atmel,samv71n19
+ - atmel,samv71n20
+ - atmel,samv71n21
+ - atmel,samv71q19
+ - atmel,samv71q20
+ - atmel,samv71q21
+ - const: atmel,samv71
+ - const: atmel,samv7
+
+...
diff --git a/Documentation/devicetree/bindings/arm/emtrion.txt b/Documentation/devicetree/bindings/arm/emtrion.txt
deleted file mode 100644
index 83329aefc483..000000000000
--- a/Documentation/devicetree/bindings/arm/emtrion.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-Emtrion Devicetree Bindings
-===========================
-
-emCON Series:
--------------
-
-Required root node properties
- - compatible:
- - "emtrion,emcon-mx6", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM
- - "emtrion,emcon-mx6-avari", "fsl,imx6q"; : emCON-MX6D or emCON-MX6Q SoM on Avari Base
- - "emtrion,emcon-mx6", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM
- - "emtrion,emcon-mx6-avari", "fsl,imx6dl"; : emCON-MX6S or emCON-MX6DL SoM on Avari Base
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 407138ebc0d0..7294ac36f4c0 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -15,6 +15,13 @@ properties:
const: '/'
compatible:
oneOf:
+ - description: i.MX1 based Boards
+ items:
+ - enum:
+ - armadeus,imx1-apf9328
+ - fsl,imx1ads
+ - const: fsl,imx1
+
- description: i.MX23 based Boards
items:
- enum:
@@ -51,6 +58,25 @@ properties:
- const: i2se,duckbill-2
- const: fsl,imx28
+ - description: i.MX31 based Boards
+ items:
+ - enum:
+ - buglabs,imx31-bug
+ - logicpd,imx31-lite
+ - const: fsl,imx31
+
+ - description: i.MX35 based Boards
+ items:
+ - enum:
+ - fsl,imx35-pdk
+ - const: fsl,imx35
+
+ - description: i.MX35 Eukrea CPUIMX35 Board
+ items:
+ - const: eukrea,mbimxsd35-baseboard
+ - const: eukrea,cpuimx35
+ - const: fsl,imx35
+
- description: i.MX50 based Boards
items:
- enum:
@@ -80,6 +106,8 @@ properties:
- description: i.MX6Q based Boards
items:
- enum:
+ - emtrion,emcon-mx6 # emCON-MX6D or emCON-MX6Q SoM
+ - emtrion,emcon-mx6-avari # emCON-MX6D or emCON-MX6Q SoM on Avari Base
- fsl,imx6q-arm2
- fsl,imx6q-sabreauto
- fsl,imx6q-sabrelite
@@ -99,6 +127,8 @@ properties:
items:
- enum:
- eckelmann,imx6dl-ci4x10
+ - emtrion,emcon-mx6 # emCON-MX6S or emCON-MX6DL SoM
+ - emtrion,emcon-mx6-avari # emCON-MX6S or emCON-MX6DL SoM on Avari Base
- fsl,imx6dl-sabreauto # i.MX6 DualLite/Solo SABRE Automotive Board
- fsl,imx6dl-sabresd # i.MX6 DualLite SABRE Smart Device Board
- technologic,imx6dl-ts4900
@@ -156,6 +186,7 @@ properties:
items:
- enum:
- fsl,imx7d-sdb # i.MX7 SabreSD Board
+ - novtech,imx7d-meerkat96 # i.MX7 Meerkat96 Board
- tq,imx7d-mba7 # i.MX7D TQ MBa7 with TQMa7D SoM
- zii,imx7d-rpu2 # ZII RPU2 Board
- const: fsl,imx7d
@@ -171,12 +202,25 @@ properties:
- const: compulab,cl-som-imx7
- const: fsl,imx7d
+ - description: i.MX7ULP based Boards
+ items:
+ - enum:
+ - fsl,imx7ulp-evk # i.MX7ULP Evaluation Kit
+ - const: fsl,imx7ulp
+
- description: i.MX8MM based Boards
items:
- enum:
- fsl,imx8mm-evk # i.MX8MM EVK Board
- const: fsl,imx8mm
+ - description: i.MX8MQ based Boards
+ items:
+ - enum:
+ - fsl,imx8mq-evk # i.MX8MQ EVK Board
+ - purism,librem5-devkit # Purism Librem5 devkit
+ - const: fsl,imx8mq
+
- description: i.MX8QXP based Boards
items:
- enum:
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
deleted file mode 100644
index 56ac7896d6d8..000000000000
--- a/Documentation/devicetree/bindings/arm/mediatek.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-MediaTek SoC based Platforms Device Tree Bindings
-
-Boards with a MediaTek SoC shall have the following property:
-
-Required root node property:
-
-compatible: Must contain one of
- "mediatek,mt2701"
- "mediatek,mt2712"
- "mediatek,mt6580"
- "mediatek,mt6589"
- "mediatek,mt6592"
- "mediatek,mt6755"
- "mediatek,mt6765"
- "mediatek,mt6795"
- "mediatek,mt6797"
- "mediatek,mt7622"
- "mediatek,mt7623"
- "mediatek,mt7629"
- "mediatek,mt8127"
- "mediatek,mt8135"
- "mediatek,mt8173"
- "mediatek,mt8183"
-
-
-Supported boards:
-
-- Evaluation board for MT2701:
- Required root node properties:
- - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
-- Evaluation board for MT2712:
- Required root node properties:
- - compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
-- Evaluation board for MT6580:
- Required root node properties:
- - compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
-- bq Aquaris5 smart phone:
- Required root node properties:
- - compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
-- Evaluation board for MT6592:
- Required root node properties:
- - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
-- Evaluation phone for MT6755(Helio P10):
- Required root node properties:
- - compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
-- Evaluation board for MT6765(Helio P22):
- Required root node properties:
- - compatible = "mediatek,mt6765-evb", "mediatek,mt6765";
-- Evaluation board for MT6795(Helio X10):
- Required root node properties:
- - compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-- Evaluation board for MT6797(Helio X20):
- Required root node properties:
- - compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
-- Mediatek X20 Development Board:
- Required root node properties:
- - compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
-- Reference board variant 1 for MT7622:
- Required root node properties:
- - compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-- Bananapi BPI-R64 for MT7622:
- Required root node properties:
- - compatible = "bananapi,bpi-r64", "mediatek,mt7622";
-- Reference board for MT7623a with eMMC:
- Required root node properties:
- - compatible = "mediatek,mt7623a-rfb-emmc", "mediatek,mt7623";
-- Reference board for MT7623a with NAND:
- Required root node properties:
- - compatible = "mediatek,mt7623a-rfb-nand", "mediatek,mt7623";
-- Reference board for MT7623n with eMMC:
- Required root node properties:
- - compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
-- Bananapi BPI-R2 board:
- - compatible = "bananapi,bpi-r2", "mediatek,mt7623";
-- Reference board for MT7629:
- Required root node properties:
- - compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
-- MTK mt8127 tablet moose EVB:
- Required root node properties:
- - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
-- MTK mt8135 tablet EVB:
- Required root node properties:
- - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
-- MTK mt8173 tablet EVB:
- Required root node properties:
- - compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
-- Evaluation board for MT8183:
- Required root node properties:
- - compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
new file mode 100644
index 000000000000..a4ad2eb926f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/mediatek.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek SoC based Platforms Device Tree Bindings
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+ - Matthias Brugger <matthias.bgg@gmail.com>
+description: |
+ Boards with a MediaTek SoC shall have the following properties.
+
+properties:
+ $nodename:
+ const: '/'
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-evb
+ - const: mediatek,mt2701
+
+ - items:
+ - enum:
+ - mediatek,mt2712-evb
+ - const: mediatek,mt2712
+ - items:
+ - enum:
+ - mediatek,mt6580-evbp1
+ - const: mediatek,mt6580
+ - items:
+ - enum:
+ - mundoreader,bq-aquaris5
+ - const: mediatek,mt6589
+ - items:
+ - enum:
+ - mediatek,mt6592-evb
+ - const: mediatek,mt6592
+ - items:
+ - enum:
+ - mediatek,mt6755-evb
+ - const: mediatek,mt6755
+ - items:
+ - enum:
+ - mediatek,mt6765-evb
+ - const: mediatek,mt6765
+ - items:
+ - enum:
+ - mediatek,mt6795-evb
+ - const: mediatek,mt6795
+ - items:
+ - enum:
+ - archermind,mt6797-x20-dev
+ - mediatek,mt6797-evb
+ - const: mediatek,mt6797
+ - items:
+ - enum:
+ - bananapi,bpi-r64
+ - mediatek,mt7622-rfb1
+ - const: mediatek,mt7622
+ - items:
+ - enum:
+ - mediatek,mt7623a-rfb-emmc
+ - mediatek,mt7623a-rfb-nand
+ - mediatek,mt7623n-rfb-emmc
+ - bananapi,bpi-r2
+ - const: mediatek,mt7623
+
+ - items:
+ - enum:
+ - mediatek,mt7629-rfb
+ - const: mediatek,mt7629
+ - items:
+ - enum:
+ - mediatek,mt8127-moose
+ - const: mediatek,mt8127
+ - items:
+ - enum:
+ - mediatek,mt8135-evbp1
+ - const: mediatek,mt8135
+ - items:
+ - enum:
+ - mediatek,mt8173-evb
+ - const: mediatek,mt8173
+ - items:
+ - enum:
+ - mediatek,mt8183-evb
+ - const: mediatek,mt8183
+...
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 1c1e48fd94b5..b301f753ed2c 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -160,6 +160,9 @@ Boards:
- AM335X phyCORE-AM335x: Development kit
compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx"
+- AM335x phyBOARD-REGOR: Single Board Computer
+ compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"
+
- AM335X UC-8100-ME-T: Communication-centric industrial computing platform
compatible = "moxa,uc-8100-me-t", "ti,am33xx";
diff --git a/Documentation/devicetree/bindings/arm/renesas.yaml b/Documentation/devicetree/bindings/arm/renesas.yaml
index 19f379863d50..08c923f8c257 100644
--- a/Documentation/devicetree/bindings/arm/renesas.yaml
+++ b/Documentation/devicetree/bindings/arm/renesas.yaml
@@ -106,6 +106,14 @@ properties:
- description: RZ/G2M (R8A774A1)
items:
+ - enum:
+ - hoperun,hihope-rzg2m # HopeRun HiHope RZ/G2M platform
+ - const: renesas,r8a774a1
+
+ - items:
+ - enum:
+ - hoperun,hihope-rzg2-ex # HopeRun expansion board for HiHope RZ/G2 platforms
+ - const: hoperun,hihope-rzg2m
- const: renesas,r8a774a1
- description: RZ/G2E (R8A774C0)
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 5c6bbf10abc9..34865042f4e4 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -316,6 +316,19 @@ properties:
- const: haoyu,marsboard-rk3066
- const: rockchip,rk3066a
+ - description: Hugsun X99 TV Box
+ items:
+ - const: hugsun,x99
+ - const: rockchip,rk3399
+
+ - description: Khadas Edge series boards
+ items:
+ - enum:
+ - khadas,edge
+ - khadas,edge-captain
+ - khadas,edge-v
+ - const: rockchip,rk3399
+
- description: mqmaker MiQi
items:
- const: mqmaker,miqi
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.txt b/Documentation/devicetree/bindings/arm/stm32/stm32.txt
deleted file mode 100644
index 6808ed9ddfd5..000000000000
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-STMicroelectronics STM32 Platforms Device Tree Bindings
-
-Each device tree must specify which STM32 SoC it uses,
-using one of the following compatible strings:
-
- st,stm32f429
- st,stm32f469
- st,stm32f746
- st,stm32h743
- st,stm32mp157
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
new file mode 100644
index 000000000000..4d194f1eb03a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/stm32/stm32.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Platforms Device Tree Bindings
+
+maintainers:
+ - Alexandre Torgue <alexandre.torgue@st.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: st,stm32f429
+
+ - items:
+ - const: st,stm32f469
+
+ - items:
+ - const: st,stm32f746
+
+ - items:
+ - const: st,stm32h743
+
+ - items:
+ - enum:
+ - arrow,stm32mp157a-avenger96 # Avenger96
+ - const: st,stm32mp157
+...
diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
index 285f4fc8519d..000a00d12d6a 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
@@ -263,7 +263,7 @@ properties:
- description: ICNova A20 SWAC
items:
- - const: swac,icnova-a20-swac
+ - const: incircuit,icnova-a20-swac
- const: incircuit,icnova-a20
- const: allwinner,sun7i-a20
diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt
index 6a059cabb2da..333e7256126a 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.txt
+++ b/Documentation/devicetree/bindings/arm/ti/k3.txt
@@ -13,6 +13,9 @@ architecture it uses, using one of the following compatible values:
- AM654
compatible = "ti,am654";
+- J721E
+ compatible = "ti,j721e";
+
Boards
------
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
new file mode 100644
index 000000000000..fc2f63860cc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 RSB Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a23-rsb
+ - items:
+ - const: allwinner,sun8i-a83t-rsb
+ - const: allwinner,sun8i-a23-rsb
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 1
+ maximum: 20000000
+
+patternProperties:
+ "^.*@[0-9a-fA-F]+$":
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+examples:
+ - |
+ rsb@1f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <0 39 4>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apb0_rst 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@3e3 {
+ compatible = "...";
+ reg = <0x3e3>;
+
+ /* ... */
+ };
+ };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
deleted file mode 100644
index eb3ed628c6f1..000000000000
--- a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-Allwinner Reduced Serial Bus (RSB) controller
-
-The RSB controller found on later Allwinner SoCs is an SMBus like 2 wire
-serial bus with 1 master and up to 15 slaves. It is represented by a node
-for the controller itself, and child nodes representing the slave devices.
-
-Required properties :
-
- - reg : Offset and length of the register set for the controller.
- - compatible : Shall be "allwinner,sun8i-a23-rsb".
- - interrupts : The interrupt line associated to the RSB controller.
- - clocks : The gate clk associated to the RSB controller.
- - resets : The reset line associated to the RSB controller.
- - #address-cells : shall be 1
- - #size-cells : shall be 0
-
-Optional properties :
-
- - clock-frequency : Desired RSB bus clock frequency in Hz. Maximum is 20MHz.
- If not set this defaults to 3MHz.
-
-Child nodes:
-
-An RSB controller node can contain zero or more child nodes representing
-slave devices on the bus. Child 'reg' properties should contain the slave
-device's hardware address. The hardware address is hardwired in the device,
-which can normally be found in the datasheet.
-
-Example:
-
- rsb@1f03400 {
- compatible = "allwinner,sun8i-a23-rsb";
- reg = <0x01f03400 0x400>;
- interrupts = <0 39 4>;
- clocks = <&apb0_gates 3>;
- clock-frequency = <3000000>;
- resets = <&apb0_rst 3>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pmic@3e3 {
- compatible = "...";
- reg = <0x3e3>;
-
- /* ... */
- };
- };
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
index a41d280c3f9f..db680413e89c 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt
@@ -12,10 +12,12 @@ following device-specific properties.
Required properties:
- compatible : Shall contain one or more of
+ - "renesas,r8a774a1-hdmi" for R8A774A1 (RZ/G2M) compatible HDMI TX
- "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
- "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
- "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
- - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
+ - "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 and RZ/G2 compatible
+ HDMI TX
When compatible with generic versions, nodes must list the SoC-specific
version corresponding to the platform first, followed by the
diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
index 6a0ff9059e72..da371c4d406c 100644
--- a/Documentation/devicetree/bindings/dma/fsl-qdma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible: Must be one of
"fsl,ls1021a-qdma": for LS1021A Board
+ "fsl,ls1028a-qdma": for LS1028A Board
"fsl,ls1043a-qdma": for ls1043A Board
"fsl,ls1046a-qdma": for ls1046A Board
- reg: Should contain the register's base address and length.
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index e5ad3b2afe17..9b298edec5b2 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -17,6 +17,7 @@ Required properties:
* which must be preceded by one of the following vendor specifics:
+ "allwinner,sun50i-h6-mali"
+ "amlogic,meson-gxm-mali"
+ + "samsung,exynos5433-mali"
+ "rockchip,rk3288-mali"
+ "rockchip,rk3399-mali"
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index ae63f09fda7d..b352a6851a06 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -17,6 +17,7 @@ Required properties:
+ amlogic,meson8b-mali
+ amlogic,meson-gxbb-mali
+ amlogic,meson-gxl-mali
+ + samsung,exynos4210-mali
+ rockchip,rk3036-mali
+ rockchip,rk3066-mali
+ rockchip,rk3188-mali
diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
index 496125c6bfb7..507b737612ea 100644
--- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
@@ -5,6 +5,7 @@ Required properties:
- compatible: should be one of the following string:
"allwinner,sun4i-a10-lradc-keys"
"allwinner,sun8i-a83t-r-lradc"
+ "allwinner,sun50i-a64-lradc", "allwinner,sun8i-a83t-r-lradc"
- reg: mmio address range of the chip
- interrupts: interrupt to which the chip is connected
- vref-supply: powersupply for the lradc reference voltage
diff --git a/Documentation/devicetree/bindings/net/can/rcar_can.txt b/Documentation/devicetree/bindings/net/can/rcar_can.txt
index 9936b9ee67c3..b463e1268ac4 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_can.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_can.txt
@@ -6,6 +6,7 @@ Required properties:
"renesas,can-r8a7744" if CAN controller is a part of R8A7744 SoC.
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
"renesas,can-r8a774a1" if CAN controller is a part of R8A774A1 SoC.
+ "renesas,can-r8a774c0" if CAN controller is a part of R8A774C0 SoC.
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
"renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
@@ -27,13 +28,8 @@ Required properties:
- reg: physical base address and size of the R-Car CAN register map.
- interrupts: interrupt specifier for the sole interrupt.
-- clocks: phandles and clock specifiers for 2 CAN clock inputs for RZ/G2
- devices.
- phandles and clock specifiers for 3 CAN clock inputs for every other
- SoC.
-- clock-names: 2 clock input name strings for RZ/G2: "clkp1", "can_clk".
- 3 clock input name strings for every other SoC: "clkp1", "clkp2",
- "can_clk".
+- clocks: phandles and clock specifiers for 3 CAN clock inputs.
+- clock-names: 3 clock input name strings: "clkp1", "clkp2", and "can_clk".
- pinctrl-0: pin control group to be used for this controller.
- pinctrl-names: must be "default".
@@ -49,8 +45,7 @@ using the below properties:
Optional properties:
- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
<0x0> (default) : Peripheral clock (clkp1)
- <0x1> : Peripheral clock (clkp2) (not supported by
- RZ/G2 devices)
+ <0x1> : Peripheral clock (clkp2)
<0x3> : External input clock
Example
diff --git a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
index ac71daa46195..32f051f6d338 100644
--- a/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
+++ b/Documentation/devicetree/bindings/net/can/rcar_canfd.txt
@@ -3,11 +3,14 @@ Renesas R-Car CAN FD controller Device Tree Bindings
Required properties:
- compatible: Must contain one or more of the following:
- - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
+ - "renesas,rcar-gen3-canfd" for R-Car Gen3 and RZ/G2 compatible controllers.
+ - "renesas,r8a774c0-canfd" for R8A774C0 (RZ/G2E) compatible controller.
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
- "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+ - "renesas,r8a77965-canfd" for R8A77965 (R-Car M3-N) compatible controller.
- "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
- "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
+ - "renesas,r8a77990-canfd" for R8A77990 (R-Car E3) compatible controller.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first, followed by the
@@ -26,12 +29,13 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each
child node supports the "status" property only, which is used to
enable/disable the respective channel.
-Required properties for "renesas,r8a7795-canfd" and "renesas,r8a7796-canfd"
+Required properties for "renesas,r8a774c0-canfd", "renesas,r8a7795-canfd",
+"renesas,r8a7796-canfd", "renesas,r8a77965-canfd", and "renesas,r8a77990-canfd"
compatible:
-In R8A7795 and R8A7796 SoCs, canfd clock is a div6 clock and can be used by both
-CAN and CAN FD controller at the same time. It needs to be scaled to maximum
-frequency if any of these controllers use it. This is done using the below
-properties:
+In R8A774C0, R8A7795, R8A7796, R8A77965, and R8A77990 SoCs, canfd clock is a
+div6 clock and can be used by both CAN and CAN FD controller at the same time.
+It needs to be scaled to maximum frequency if any of these controllers use it.
+This is done using the below properties:
- assigned-clocks: phandle of canfd clock.
- assigned-clock-rates: maximum frequency of this clock.
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
new file mode 100644
index 000000000000..0ac52f83a58c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 PWM Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <maxime.ripard@bootlin.com>
+
+properties:
+ "#pwm-cells":
+ const: 3
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun4i-a10-pwm
+ - const: allwinner,sun5i-a10s-pwm
+ - const: allwinner,sun5i-a13-pwm
+ - const: allwinner,sun7i-a20-pwm
+ - const: allwinner,sun8i-h3-pwm
+ - items:
+ - const: allwinner,sun8i-a83t-pwm
+ - const: allwinner,sun8i-h3-pwm
+ - items:
+ - const: allwinner,sun50i-a64-pwm
+ - const: allwinner,sun5i-a13-pwm
+ - items:
+ - const: allwinner,sun50i-h5-pwm
+ - const: allwinner,sun5i-a13-pwm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - "#pwm-cells"
+ - compatible
+ - reg
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ pwm: pwm@1c20e00 {
+ compatible = "allwinner,sun7i-a20-pwm";
+ reg = <0x01c20e00 0xc>;
+ clocks = <&osc24M>;
+ #pwm-cells = <3>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
deleted file mode 100644
index 2a1affbff45e..000000000000
--- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Allwinner sun4i and sun7i SoC PWM controller
-
-Required properties:
- - compatible: should be one of:
- - "allwinner,sun4i-a10-pwm"
- - "allwinner,sun5i-a10s-pwm"
- - "allwinner,sun5i-a13-pwm"
- - "allwinner,sun7i-a20-pwm"
- - "allwinner,sun8i-h3-pwm"
- - "allwinner,sun50i-a64-pwm", "allwinner,sun5i-a13-pwm"
- - "allwinner,sun50i-h5-pwm", "allwinner,sun5i-a13-pwm"
- - reg: physical base address and length of the controller's registers
- - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
- the cells format.
- - clocks: From common clock binding, handle to the parent clock.
-
-Example:
-
- pwm: pwm@1c20e00 {
- compatible = "allwinner,sun7i-a20-pwm";
- reg = <0x01c20e00 0xc>;
- clocks = <&osc24M>;
- #pwm-cells = <3>;
- };
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 0a9b5444f4e6..dcba86b0a0d0 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -1,6 +1,7 @@
OMAP UART controller
Required properties:
+- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers
- compatible : should be "ti,am654-uart" for AM654 controllers
- compatible : should be "ti,omap2-uart" for OMAP2 controllers
- compatible : should be "ti,omap3-uart" for OMAP3 controllers
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index c0594450e9ef..c5220bcd852b 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -42,12 +42,18 @@ Required Properties:
- "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793.
- "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794.
- "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794.
+ - "renesas,r8a7795-cmt0" for the 32-bit CMT0 device included in r8a7795.
+ - "renesas,r8a7795-cmt1" for the 48-bit CMT1 device included in r8a7795.
- "renesas,r8a7796-cmt0" for the 32-bit CMT0 device included in r8a7796.
- "renesas,r8a7796-cmt1" for the 48-bit CMT1 device included in r8a7796.
+ - "renesas,r8a77965-cmt0" for the 32-bit CMT0 device included in r8a77965.
+ - "renesas,r8a77965-cmt1" for the 48-bit CMT1 device included in r8a77965.
- "renesas,r8a77970-cmt0" for the 32-bit CMT0 device included in r8a77970.
- "renesas,r8a77970-cmt1" for the 48-bit CMT1 device included in r8a77970.
- "renesas,r8a77980-cmt0" for the 32-bit CMT0 device included in r8a77980.
- "renesas,r8a77980-cmt1" for the 48-bit CMT1 device included in r8a77980.
+ - "renesas,r8a77990-cmt0" for the 32-bit CMT0 device included in r8a77990.
+ - "renesas,r8a77990-cmt1" for the 48-bit CMT1 device included in r8a77990.
- "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2
and RZ/G1.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index eade302345a3..6992bbbbffab 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -395,12 +395,16 @@ patternProperties:
description: Holt Integrated Circuits, Inc.
"^honeywell,.*":
description: Honeywell
+ "^hoperun,.*":
+ description: Jiangsu HopeRun Software Co., Ltd.
"^hp,.*":
description: Hewlett Packard
"^hsg,.*":
description: HannStar Display Co.
"^holtek,.*":
description: Holtek Semiconductor, Inc.
+ "^hugsun,.*":
+ description: Shenzhen Hugsun Technology Co. Ltd.
"^hwacom,.*":
description: HwaCom Systems Inc.
"^hyundai,.*":
@@ -735,6 +739,8 @@ patternProperties:
description: PROBOX2 (by W2COMP Co., Ltd.)
"^pulsedlight,.*":
description: PulsedLight, Inc
+ "^purism,.*":
+ description: Purism, SPC
"^qca,.*":
description: Qualcomm Atheros, Inc.
"^qcom,.*":
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index dab2914fa293..9159fa2cea90 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -586,6 +586,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-colibri-emmc-eval-v3.dtb \
imx7d-colibri-eval-v3.dtb \
imx7d-mba7.dtb \
+ imx7d-meerkat96.dtb \
imx7d-nitrogen7.dtb \
imx7d-pico-hobbit.dtb \
imx7d-pico-pi.dtb \
@@ -602,6 +603,7 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-moxa-uc-8410a.dtb \
ls1021a-qds.dtb \
+ ls1021a-tsn.dtb \
ls1021a-twr.dtb
dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
@@ -748,6 +750,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
am335x-pepper.dtb \
am335x-phycore-rdk.dtb \
am335x-pocketbeagle.dtb \
+ am335x-regor-rdk.dtb \
am335x-sancloud-bbe.dtb \
am335x-shc.dtb \
am335x-sbc-t335.dtb \
@@ -975,6 +978,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
stm32746g-eval.dtb \
stm32h743i-eval.dtb \
stm32h743i-disco.dtb \
+ stm32mp157a-avenger96.dtb \
stm32mp157a-dk1.dtb \
stm32mp157c-dk2.dtb \
stm32mp157c-ed1.dtb \
@@ -1268,10 +1272,16 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-facebook-cmm.dtb \
aspeed-bmc-facebook-tiogapass.dtb \
+ aspeed-bmc-facebook-yamp.dtb \
aspeed-bmc-intel-s2600wf.dtb \
+ aspeed-bmc-inspur-fp5280g2.dtb \
+ aspeed-bmc-lenovo-hr630.dtb \
+ aspeed-bmc-microsoft-olympus.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
aspeed-bmc-opp-romulus.dtb \
+ aspeed-bmc-opp-swift.dtb \
+ aspeed-bmc-opp-vesnin.dtb \
aspeed-bmc-opp-witherspoon.dtb \
aspeed-bmc-opp-zaius.dtb \
aspeed-bmc-portwell-neptune.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 49e46baf9542..386d5f89978e 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -30,6 +30,12 @@
AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
};
&uart1 {
@@ -65,7 +71,13 @@
};
&cpsw_emac1 {
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
phy-handle = <&phy1>;
};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index 9e88bc2f6465..b0df7256db13 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -51,6 +51,12 @@
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
};
&uart1 {
@@ -107,7 +113,13 @@
};
&cpsw_emac1 {
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
phy-handle = <&phy1>;
};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 28aa00422951..d6aa46e8700e 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -60,6 +60,11 @@
>;
};
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */
+ >;
+ };
};
&uart1 {
@@ -125,7 +130,7 @@
};
&cpsw_emac1 {
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
phy-handle = <&phy1>;
};
@@ -136,3 +141,9 @@
status = "okay";
};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
index d774bf76720c..9bfa032bcada 100644
--- a/arch/arm/boot/dts/am335x-pcm-953.dtsi
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -36,15 +36,13 @@
pinctrl-names = "default";
pinctrl-0 = <&user_leds_pins>;
- green {
- label = "green:user";
+ user-led0 {
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
default-state = "on";
};
- yellow {
- label = "yellow:user";
+ user-led1 {
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
linux,default-trigger = "gpio";
default-state = "on";
@@ -135,22 +133,6 @@
&davinci_mdio {
phy1: ethernet-phy@2 {
reg = <2>;
-
- /* Register 260 (104h) – RGMII Clock and Control Pad Skew */
- rxc-skew-ps = <1400>;
- rxdv-skew-ps = <0>;
- txc-skew-ps = <1400>;
- txen-skew-ps = <0>;
- /* Register 261 (105h) – RGMII RX Data Pad Skew */
- rxd3-skew-ps = <0>;
- rxd2-skew-ps = <0>;
- rxd1-skew-ps = <0>;
- rxd0-skew-ps = <0>;
- /* Register 262 (106h) – RGMII TX Data Pad Skew */
- txd3-skew-ps = <0>;
- txd2-skew-ps = <0>;
- txd1-skew-ps = <0>;
- txd0-skew-ps = <0>;
};
};
diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts
index 672daf9d36be..43907d03e675 100644
--- a/arch/arm/boot/dts/am335x-phycore-rdk.dts
+++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts
@@ -10,6 +10,10 @@
#include "am335x-pcm-953.dtsi"
/* SoM */
+&gpmc {
+ status = "okay";
+};
+
&i2c_eeprom {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index ee6b1cb27ce5..3d0672b53d77 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -27,17 +27,13 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- regulators {
- compatible = "simple-bus";
-
- vcc5v: fixedregulator0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
+ vcc5v: fixedregulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
};
};
@@ -50,6 +46,33 @@
status = "okay";
};
+/* EMMC */
+&am33xx_pinmux {
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmc_reg>;
+ bus-width = <8>;
+ ti,non-removable;
+ status = "disabled";
+};
+
/* Ethernet */
&am33xx_pinmux {
ethernet0_pins: pinmux_ethernet0 {
@@ -164,7 +187,7 @@
};
&gpmc {
- status = "okay";
+ status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins>;
ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */
diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/am335x-regor-rdk.dts
new file mode 100644
index 000000000000..66a1360b83d5
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-regor-rdk.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+ status = "okay";
+};
+
+&i2c_eeprom {
+ status = "okay";
+};
+
+&serial_flash {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
new file mode 100644
index 000000000000..5aff02a95766
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+ model = "Phytec AM335x phyBOARD-REGOR";
+ compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+ vcc3v3: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ /* User IO */
+ user_leds: user_leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds_pins>;
+
+ run_stop-led {
+ gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+
+ error-led {
+ gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "gpio";
+ default-state = "off";
+ };
+ };
+};
+
+/* User Leds */
+&am33xx_pinmux {
+ user_leds_pins: pinmux_user_leds {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */
+ AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */
+ >;
+ };
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+ dcan1_pins: pinmux_dcan1 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ >;
+ };
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins>;
+ status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+ ethernet1_pins: pinmux_ethernet1 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */
+ >;
+ };
+};
+
+&cpsw_emac1 {
+ phy-handle = <&phy1>;
+ phy-mode = "mii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mac {
+ slaves = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+ dual_emac = <1>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_gpios_pins>;
+
+ user_gpios_pins: pinmux_user_gpios {
+ pinctrl-single,pins = <
+ /* DIGIN 1-4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7) /* gpmc_ad9.gpio0_23 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7) /* gpmc_ad8.gpio0_22 */
+ /* DIGOUT 1-4 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad15.gpio1_15 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad14.gpio1_14 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad13.gpio1_13 */
+ AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_12 */
+ >;
+ };
+};
+
+/* MMC */
+&am33xx_pinmux {
+ mmc1_pins: pinmux_mmc1 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
+ >;
+ };
+};
+
+&mmc1 {
+ vmmc-supply = <&vcc3v3>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+ status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+ uart0_pins: pinmux_uart0 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ >;
+ };
+
+ uart2_pins: pinmux_uart2 {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */
+ AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+ uart1_rs485_pins: pinmux_uart1_rs485_pins {
+ pinctrl-single,pins = <
+ AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+ AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+ >;
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_rs485_pins>;
+ status = "okay";
+ linux,rs485-enabled-at-boot-time;
+};
+
+/* USB */
+&cppi41dma {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
index 2e04f6df8257..866b5f0cbfbc 100644
--- a/arch/arm/boot/dts/am335x-wega-rdk.dts
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -10,6 +10,10 @@
#include "am335x-wega.dtsi"
/* SoM */
+&gpmc {
+ status = "okay";
+};
+
&i2c_eeprom {
status = "okay";
};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 67bde56f89fd..61fc4cd2d164 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -12,16 +12,12 @@
compatible = "ti,da830-evm-audio";
};
- regulators {
- compatible = "simple-bus";
-
- vcc3v3: fixedregulator1 {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
+ vcc3v3: fixedregulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
};
};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 610506723ea5..fe0207b88053 100644
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -119,6 +119,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x40000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
flash1@44000000 {
@@ -126,6 +129,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x44000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
/* SMSC LAN91C111 ethernet with PHY and EEPROM */
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index cbbb8878daa3..2625ce66f8e7 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -120,12 +120,18 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x30000000 0x4000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
fpga_flash@38000000 {
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x38000000 0x800000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
/*
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index 2015619ca22c..c69cf7ddbe61 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -235,6 +235,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x40000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
flash1@44000000 {
@@ -242,6 +245,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x44000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
bridge {
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
index a81e9c282432..09f3f544f3a7 100644
--- a/arch/arm/boot/dts/arm-realview-pbx.dtsi
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -134,6 +134,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x40000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
flash1@44000000 {
@@ -141,6 +144,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x44000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
/* SMSC 9118 ethernet with PHY and EEPROM */
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 9fd1cb9f4992..85e2e9e27a9f 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -143,6 +143,20 @@
};
};
+ auxdisplay {
+ compatible = "hit,hd44780";
+ data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+ <&gpio1 26 GPIO_ACTIVE_HIGH>,
+ <&gpio1 27 GPIO_ACTIVE_HIGH>,
+ <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+ rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+ rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+ display-height-chars = <2>;
+ display-width-chars = <16>;
+ };
+
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&backup_button_pin
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
index 43aba4071a5c..d519d307aa2a 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -372,3 +372,11 @@
&adc {
status = "okay";
};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 000000000000..4e09a9cf32b7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+ model = "Facebook YAMP 100 BMC";
+ compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+ aliases {
+ /*
+ * Override the default uart aliases to avoid breaking
+ * the legacy applications.
+ */
+ serial0 = &uart5;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+ status = "okay";
+ aspeed,reset-type = "system";
+};
+
+/*
+ * wdt2 is not used by Yamp.
+ */
+&wdt2 {
+ status = "disabled";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "facebook-bmc-flash-layout.dtsi"
+ };
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ use-ncsi;
+ no-hw-checksum;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+
+ i2c-switch@75 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x75>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 000000000000..628195b66d46
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,846 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "FP5280G2 BMC";
+ compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@9f000000 {
+ no-map;
+ reg = <0x9f000000 0x01000000>; /* 16M */
+ };
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ coldfire_memory: codefire_memory@9ef00000 {
+ reg = <0x9ef00000 0x00100000>;
+ no-map;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ memory-region = <&coldfire_memory>;
+ aspeed,sram = <&sram>;
+ aspeed,cvic = <&cvic>;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 3)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 0)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(F, 1)>;
+ };
+
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+ linux,code = <1>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+ linux,code = <2>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <3>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <4>;
+ };
+
+ fan4-presence {
+ label = "fan4-presence";
+ gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ };
+
+ fan5-presence {
+ label = "fan5-presence";
+ gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan6-presence {
+ label = "fan6-presence";
+ gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+
+ fan7-presence {
+ label = "fan7-presence";
+ gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+ linux,code = <8>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "power";
+ /* TODO: dummy gpio */
+ gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 15>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* Test Point */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+ /* APSS */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+ /* LCD */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ label = "fru";
+ };
+
+};
+
+&i2c2 {
+ status = "okay";
+
+ tmp112@48 {
+ compatible = "ti,tmp112";
+ reg = <0x48>;
+ label = "inlet";
+ };
+
+ tmp112@49 {
+ compatible = "ti,tmp112";
+ reg = <0x49>;
+ label = "outlet";
+ };
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tmp112@4a {
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "psu_inlet";
+ };
+
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tmp112@4a {
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "ocp_zone";
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ tmp112@4a {
+ compatible = "ti,tmp112";
+ reg = <0x4a>;
+ label = "bmc_zone";
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ tmp112@7c {
+ compatible = "microchip,emc1413";
+ reg = <0x7c>;
+ };
+ };
+
+ };
+};
+
+&i2c3 {
+ /* Riser Card */
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ };
+};
+
+&i2c5 {
+ /* vr */
+ status = "okay";
+};
+
+&i2c6 {
+ /* bp card */
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ adm1278@10 {
+ compatible = "adi,adm1278";
+ reg = <0x10>;
+ };
+
+ adm1278@13 {
+ compatible = "adi,adm1278";
+ reg = <0x13>;
+ };
+
+ adm1278@50 {
+ compatible = "adi,adm1278";
+ reg = <0x50>;
+ };
+
+ adm1278@53 {
+ compatible = "adi,adm1278";
+ reg = <0x53>;
+ };
+
+ };
+
+ /*pcie riser*/
+
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca0: pca9555@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ };
+
+ pca1: pca9555@21 {
+ compatible = "nxp,pca9555";
+ reg = <0x21>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca2: pca9555@22 {
+ compatible = "nxp,pca9555";
+ reg = <0x22>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca3: pca9555@23 {
+ compatible = "nxp,pca9555";
+ reg = <0x23>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca4: pca9555@24 {
+ compatible = "nxp,pca9555";
+ reg = <0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ pca5: pca9555@25 {
+ compatible = "nxp,pca9555";
+ reg = <0x25>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+};
+
+&i2c9 {
+ /* cpld */
+ status = "okay";
+};
+
+&i2c10 {
+ /* hdd bp */
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ power-supply@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
+
+ power-supply@5a {
+ compatible = "pmbus";
+ reg = <0x5a>;
+ };
+};
+
+&i2c12 {
+ /* odcc */
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_b7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "BMC_INIT_OK";
+ };
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+ status = "okay";
+
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+ &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+ &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+ &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+ &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+ &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+ &pinctrl_pwm2_default &pinctrl_pwm3_default
+ &pinctrl_pwm4_default &pinctrl_pwm5_default
+ &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+ };
+
+ fan@6 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+ };
+
+ fan@7 {
+ reg = <0x07>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+ };
+
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 000000000000..d3695a32e8e0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HR630 BMC";
+ compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c14 = &i2c_rbp;
+ i2c15 = &i2c_fbp1;
+ i2c16 = &i2c_fbp2;
+ i2c17 = &i2c_fbp3;
+ i2c18 = &i2c_riser2;
+ i2c19 = &i2c_pcie4;
+ i2c20 = &i2c_riser1;
+ i2c21 = &i2c_ocp;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x00100000>; /* 1M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>,
+ <&adc 12>, <&adc 13>, <&adc 14>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&uart1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default
+ &pinctrl_rxd2_default
+ &pinctrl_nrts2_default
+ &pinctrl_ndtr2_default
+ &pinctrl_ndsr2_default
+ &pinctrl_ncts2_default
+ &pinctrl_ndcd2_default
+ &pinctrl_nri2_default>;
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default
+ &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&ibt {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&mac1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default>;
+};
+
+&i2c0 {
+ status = "okay";
+ /* temp1 inlet */
+ tmp75@4e {
+ compatible = "national,lm75";
+ reg = <0x4e>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ /* temp2 outlet */
+ tmp75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+ /* Slot 0,
+ * Slot 1,
+ * Slot 2,
+ * Slot 3
+ */
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect; /* may use mux@70 next. */
+
+ i2c_rbp: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_fbp1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_fbp2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_fbp3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ /* Slot 0,
+ * Slot 1,
+ * Slot 2,
+ * Slot 3
+ */
+ i2c-switch@76 {
+ compatible = "nxp,pca9546";
+ reg = <0x76>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ i2c-mux-idle-disconnect; /* may use mux@76 next. */
+
+ i2c_riser2: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c_pcie4: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c_riser1: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c_ocp: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "atmel,24c256";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+ fan@6 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+ };
+
+ fan@7 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+ };
+
+ fan@8 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+ };
+
+ fan@9 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+ };
+
+ fan@10 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+ };
+
+ fan@11 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+ };
+
+ fan@12 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+ };
+
+ fan@13 {
+ reg = <0x06>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+ };
+};
+
+&gpio {
+
+ pin_gpio_b5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+ };
+
+ pin_gpio_f0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "IRQ_BMC_PCH_NMI_R";
+ };
+
+ pin_gpio_f3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "I2C_BUS0_RST_OUT_N";
+ };
+
+ pin_gpio_f4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "FM_SKT0_FAULT_LED";
+ };
+
+ pin_gpio_f5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "FM_SKT1_FAULT_LED";
+ };
+
+ pin_gpio_g4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FAN_PWR_CTL_N";
+ };
+
+ pin_gpio_g7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "RST_BMC_PCIE_I2CMUX_N";
+ };
+
+ pin_gpio_h2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PSU1_FFS_N_R";
+ };
+
+ pin_gpio_h3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PSU2_FFS_N_R";
+ };
+
+ pin_gpio_i3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_INTRUDED_COVER";
+ };
+
+ pin_gpio_j2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_BIOS_UPDATE_N";
+ };
+
+ pin_gpio_j3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "RST_BMC_HDD_I2CMUX_N";
+ };
+
+ pin_gpio_s2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "BMC_VGA_SW";
+ };
+
+ pin_gpio_s4 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+ output;
+ line-name = "VBAT_EN_N";
+ };
+
+ pin_gpio_s6 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PU_BMC_GPIOS6";
+ };
+
+ pin_gpio_y0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BMC_NCSI_MUX_CTL_S0";
+ };
+
+ pin_gpio_y1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BMC_NCSI_MUX_CTL_S1";
+ };
+
+ pin_gpio_z0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "I2C_RISER2_INT_N";
+ };
+
+ pin_gpio_z2 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "I2C_RISER2_RESET_N";
+ };
+
+ pin_gpio_z3 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "FM_BMC_PCH_SCI_LPC_N";
+ };
+
+ pin_gpio_z7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BMC_POST_CMPLT_N";
+ };
+
+ pin_gpio_aa0 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "HOST_BMC_USB_SEL";
+ };
+
+ pin_gpio_aa5 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "I2C_BUS1_RST_OUT_N";
+ };
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
new file mode 100644
index 000000000000..73319917cb74
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Olympus BMC";
+ compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@40000000 {
+ reg = <0x40000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@5f000000 {
+ no-map;
+ reg = <0x5f000000 0x01000000>; /* 16M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ bmc_heartbeat {
+ gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ power_green {
+ gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+ };
+
+ power_amber {
+ gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ identify {
+ gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ fault {
+ gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+ };
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default>;
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp421@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@4c {
+ compatible = "ti,tmp421";
+ reg = <0x4c>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&wdt2 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default
+ &pinctrl_pwm6_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+
+ fan@5 {
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
index 024e52a6cd0f..de95112e2a04 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -322,3 +322,5 @@
&adc {
status = "okay";
};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
index b249da80fb83..b0cb34ccb135 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -347,3 +347,25 @@
line-name = "BMC_TPM_INT_N";
};
};
+
+&fsi {
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ fsi_hub0: hub@3400 {
+ compatible = "ibm,fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-scan-on-init;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index 418a1988b262..9628ecb879cf 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -42,6 +42,13 @@
compatible = "shared-dma-pool";
reusable;
};
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
};
leds {
@@ -304,3 +311,10 @@
&adc {
status = "okay";
};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
new file mode 100644
index 000000000000..caac895c60b4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -0,0 +1,966 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+ model = "Swift BMC";
+ compatible = "ibm,swift-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flash_memory: region@98000000 {
+ no-map;
+ reg = <0x98000000 0x04000000>; /* 64M */
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ air-water {
+ label = "air-water";
+ gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(B, 5)>;
+ };
+
+ checkstop {
+ label = "checkstop";
+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(J, 2)>;
+ };
+
+ ps0-presence {
+ label = "ps0-presence";
+ gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(R, 7)>;
+ };
+
+ ps1-presence {
+ label = "ps1-presence";
+ gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(N, 0)>;
+ };
+
+ oppanel-presence {
+ label = "oppanel-presence";
+ gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(A, 7)>;
+ };
+
+ opencapi-riser-presence {
+ label = "opencapi-riser-presence";
+ gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <ASPEED_GPIO(I, 0)>;
+ };
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 12>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <1000>;
+
+ scm0-presence {
+ label = "scm0-presence";
+ gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ scm1-presence {
+ label = "scm1-presence";
+ gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+
+ cpu0vrm-presence {
+ label = "cpu0vrm-presence";
+ gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+ linux,code = <12>;
+ };
+
+ cpu1vrm-presence {
+ label = "cpu1vrm-presence";
+ gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+ linux,code = <13>;
+ };
+
+ fan0-presence {
+ label = "fan0-presence";
+ gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+ linux,code = <5>;
+ };
+
+ fan1-presence {
+ label = "fan1-presence";
+ gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+ linux,code = <6>;
+ };
+
+ fan2-presence {
+ label = "fan2-presence";
+ gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+ linux,code = <7>;
+ };
+
+ fan3-presence {
+ label = "fan3-presence";
+ gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+ linux,code = <8>;
+ };
+
+ fanboost-presence {
+ label = "fanboost-presence";
+ gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+ linux,code = <9>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ fan0 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan1 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ fan2 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ fan3 {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+ };
+
+ fanboost {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+ };
+
+ front-fault {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+ };
+
+ front-power {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+ };
+
+ front-id {
+ retain-state-shutdown;
+ default-state = "keep";
+ gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ rear-fault {
+ gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+ };
+
+ rear-id {
+ gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fsi: gpio-fsi {
+ compatible = "fsi-master-gpio", "fsi-master";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ no-gpio-delays;
+
+ clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+ mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+ };
+
+ iio-hwmon-dps310 {
+ compatible = "iio-hwmon";
+ io-channels = <&dps 0>;
+ };
+
+};
+
+&fmc {
+ status = "okay";
+
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x7F80000>;
+ label = "obmc-ubi";
+ };
+ };
+ };
+
+ flash@1 {
+ status = "okay";
+ label = "alt-bmc";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ partitions {
+ #address-cells = < 1 >;
+ #size-cells = < 1 >;
+ compatible = "fixed-partitions";
+ u-boot@0 {
+ reg = < 0 0x60000 >;
+ label = "alt-u-boot";
+ };
+ u-boot-env@60000 {
+ reg = < 0x60000 0x20000 >;
+ label = "alt-u-boot-env";
+ };
+ obmc-ubi@80000 {
+ reg = < 0x80000 0x7F80000>;
+ label = "alt-obmc-ubi";
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ spi-max-frequency = <100000000>;
+ };
+};
+
+&uart1 {
+ /* Rear RS-232 connector */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default
+ &pinctrl_nrts1_default
+ &pinctrl_ndtr1_default
+ &pinctrl_ndsr1_default
+ &pinctrl_ncts1_default
+ &pinctrl_ndcd1_default
+ &pinctrl_nri1_default>;
+};
+
+&uart2 {
+ /* APSS */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi1>;
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&i2c2 {
+ status = "okay";
+
+ /* MUX ->
+ * Samtec 1
+ * Samtec 2
+ */
+};
+
+&i2c3 {
+ status = "okay";
+
+ max31785@52 {
+ compatible = "maxim,max31785a";
+ reg = <0x52>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fan@0 {
+ compatible = "pmbus-fan";
+ reg = <0>;
+ tach-pulses = <2>;
+ maxim,fan-rotor-input = "tach";
+ maxim,fan-pwm-freq = <25000>;
+ maxim,fan-no-watchdog;
+ maxim,fan-no-fault-ramp;
+ maxim,fan-ramp = <2>;
+ maxim,fan-fault-pin-mon;
+ };
+
+ fan@1 {
+ compatible = "pmbus-fan";
+ reg = <1>;
+ tach-pulses = <2>;
+ maxim,fan-rotor-input = "tach";
+ maxim,fan-pwm-freq = <25000>;
+ maxim,fan-no-watchdog;
+ maxim,fan-no-fault-ramp;
+ maxim,fan-ramp = <2>;
+ maxim,fan-fault-pin-mon;
+ };
+
+ fan@2 {
+ compatible = "pmbus-fan";
+ reg = <2>;
+ tach-pulses = <2>;
+ maxim,fan-rotor-input = "tach";
+ maxim,fan-pwm-freq = <25000>;
+ maxim,fan-no-watchdog;
+ maxim,fan-no-fault-ramp;
+ maxim,fan-ramp = <2>;
+ maxim,fan-fault-pin-mon;
+ };
+
+ fan@3 {
+ compatible = "pmbus-fan";
+ reg = <3>;
+ tach-pulses = <2>;
+ maxim,fan-rotor-input = "tach";
+ maxim,fan-pwm-freq = <25000>;
+ maxim,fan-no-watchdog;
+ maxim,fan-no-fault-ramp;
+ maxim,fan-ramp = <2>;
+ maxim,fan-fault-pin-mon;
+ };
+
+ fan@4 {
+ compatible = "pmbus-fan";
+ reg = <4>;
+ tach-pulses = <2>;
+ maxim,fan-rotor-input = "tach";
+ maxim,fan-pwm-freq = <25000>;
+ maxim,fan-no-watchdog;
+ maxim,fan-no-fault-ramp;
+ maxim,fan-ramp = <2>;
+ maxim,fan-fault-pin-mon;
+ };
+ };
+
+ pca0: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ power-supply@68 {
+ compatible = "ibm,cffps1";
+ reg = <0x68>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ power-supply@69 {
+ compatible = "ibm,cffps1";
+ reg = <0x69>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ dps: dps310@76 {
+ compatible = "infineon,dps310";
+ reg = <0x76>;
+ #io-channel-cells = <0>;
+ };
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ si7021a20@20 {
+ compatible = "si,si7021a20";
+ reg = <0x20>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ pca1: pca9551@60 {
+ compatible = "nxp,pca9551";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+ "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
+ "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+ "P9_SCM0_PRES", "P9_SCM1_PRES",
+ "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+ "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+ "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
+ "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+ gpio@0 {
+ reg = <0>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ };
+
+ rtc@32 {
+ compatible = "epson,rx8900";
+ reg = <0x32>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ ucd90160@64 {
+ compatible = "ti,ucd90160";
+ reg = <0x64>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ ir35221@71 {
+ compatible = "infineon,ir35221";
+ reg = <0x71>;
+ };
+
+ ir35221@72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+ pca2: pca9539@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ };
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
+ tmp423a@4c {
+ compatible = "ti,tmp423";
+ reg = <0x4c>;
+ };
+
+ ir35221@71 {
+ compatible = "infineon,ir35221";
+ reg = <0x71>;
+ };
+
+ ir35221@72 {
+ compatible = "infineon,ir35221";
+ reg = <0x72>;
+ };
+
+ pca3: pca9539@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio@0 {
+ reg = <0>;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ };
+
+ gpio@2 {
+ reg = <2>;
+ };
+
+ gpio@3 {
+ reg = <3>;
+ };
+
+ gpio@4 {
+ reg = <4>;
+ };
+
+ gpio@5 {
+ reg = <5>;
+ };
+
+ gpio@6 {
+ reg = <6>;
+ };
+
+ gpio@7 {
+ reg = <7>;
+ };
+
+ gpio@8 {
+ reg = <8>;
+ };
+
+ gpio@9 {
+ reg = <9>;
+ };
+
+ gpio@10 {
+ reg = <10>;
+ };
+
+ gpio@11 {
+ reg = <11>;
+ };
+
+ gpio@12 {
+ reg = <12>;
+ };
+
+ gpio@13 {
+ reg = <13>;
+ };
+
+ gpio@14 {
+ reg = <14>;
+ };
+
+ gpio@15 {
+ reg = <15>;
+ };
+ };
+};
+
+&i2c11 {
+ /* MUX
+ * -> PCIe Slot 0
+ * -> PCIe Slot 1
+ * -> PCIe Slot 2
+ * -> PCIe Slot 3
+ */
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+
+ tmp275@48 {
+ compatible = "ti,tmp275";
+ reg = <0x48>;
+ };
+
+ tmp275@4a {
+ compatible = "ti,tmp275";
+ reg = <0x4a>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+ memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+ aspeed,reset-type = "none";
+ aspeed,external-signal;
+ aspeed,ext-push-pull;
+ aspeed,ext-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+ aspeed,alt-boot;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&adc {
+ status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
new file mode 100644
index 000000000000..0b9e29c3212e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Vesnin BMC";
+ compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x40000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer@5f000000 {
+ no-map;
+ reg = <0x5f000000 0x01000000>; /* 16MB */
+ };
+ flash_memory: region@5c000000 {
+ no-map;
+ reg = <0x5c000000 0x02000000>; /* 32M */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+ };
+ power_red {
+ gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+ };
+
+ id_blue {
+ gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+ };
+
+ alarm_red {
+ gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+ };
+
+ alarm_yel {
+ gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ button_checkstop {
+ label = "checkstop";
+ linux,code = <74>;
+ gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+ };
+
+ button_identify {
+ label = "identify";
+ linux,code = <152>;
+ gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+ flash@0 {
+ status = "okay";
+ label = "pnor";
+ m25p,fast-read;
+ };
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+ no-hw-checksum;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+ memory-region = <&flash_memory>;
+ flash = <&spi>;
+};
+
+&ibt {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ pagesize = <64>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp75@49 {
+ compatible = "ti,tmp75";
+ reg = <0x49>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ occ-hwmon@50 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x50>;
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ occ-hwmon@51 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x51>;
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ w83795g@2f {
+ compatible = "nuvoton,w83795g";
+ reg = <0x2f>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+
+ occ-hwmon@56 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x56>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+
+ occ-hwmon@57 {
+ compatible = "ibm,p8-occ-hwmon";
+ reg = <0x57>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+
+ rtc@68 {
+ compatible = "maxim,ds3231";
+ reg = <0x68>;
+ };
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index f1356ca794d8..31ea34e14c79 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -33,6 +33,13 @@
compatible = "shared-dma-pool";
reusable;
};
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02000000>; /* 32MM */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
};
gpio-keys {
@@ -640,3 +647,10 @@
&vhub {
status = "okay";
};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index 2c5aa90a546d..30624378316d 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -7,6 +7,14 @@
model = "Zaius BMC";
compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+ aliases {
+ i2c15 = &i2cpcie0;
+ i2c16 = &i2cpcie1;
+ i2c17 = &i2cpcie2;
+ i2c19 = &i2cpcie3;
+ i2c20 = &i2cpcie4;
+ };
+
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
@@ -223,6 +231,27 @@
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
+
+ i2cpcie0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2cpcie1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ i2cpcie2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ i2ctpm: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
};
/* MUX1 PCA9546A @71h
@@ -253,6 +282,17 @@
reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
+
+ i2cpcie3: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+ i2cpcie4: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
};
/* MUX1 PCA9546A @71h
@@ -296,33 +336,98 @@
reg = <0x54>;
};
};
+
+ };
+
+ vrm@64 {
+ compatible = "isil,isl68137";
+ reg = <0x64>;
+ };
+
+ vrm@40 {
+ compatible = "isil,isl68137";
+ reg = <0x40>;
+ };
+
+ vrm@60 {
+ compatible = "isil,isl68137";
+ reg = <0x60>;
+ };
+
+ vrm@43 {
+ compatible = "infineon,ir38064";
+ reg = <0x43>;
+ };
+
+ vrm@41 {
+ compatible = "isil,isl68137";
+ reg = <0x41>;
};
/* Master selector PCA9541A @70h (other master: CPU0)
* LM5066I PMBUS @10h
*/
- /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
- power-brick@61 {
+ /*
+ * Brick will be one of these types/addresses. Depending
+ * on the board SKU only one is actually present and will successfully
+ * instantiate while the others will fail the probe operation.
+ * These are the PVT (and presumably beyond) addresses:
+ * 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+ * 12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+ */
+ power-brick@6a {
+ compatible = "delta,dps800";
+ reg = <0x6a>;
+ };
+ power-brick@30 {
compatible = "delta,dps800";
- reg = <0x61>;
+ reg = <0x30>;
};
/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
/* CPU0 VR ISL68137 0.8V PMBUS @60h */
- /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
+ /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+ /* Master selector PCA9541A @70h (other master: CPU0)
+ * LM5066I PMBUS @10h
+ */
};
&i2c8 {
status = "okay";
- /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
- /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
- /* CPU1 VR ISL68137 0.8V PMBUS @61h */
+ vrm@64 {
+ compatible = "isil,isl68137";
+ reg = <0x64>;
+ };
+
+ vrm@40 {
+ compatible = "isil,isl68137";
+ reg = <0x40>;
+ };
+
+ vrm@41 {
+ compatible = "isil,isl68137";
+ reg = <0x41>;
+ };
+
+ vrm@42 {
+ compatible = "infineon,ir38064";
+ reg = <0x42>;
+ };
+
+ vrm@60 {
+ compatible = "isil,isl68137";
+ reg = <0x60>;
+ };
+
+ /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+ /* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+ /* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
- /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
+ /* CPU1 VR ISL68137 0.8V PMBUS @60h */
};
@@ -435,3 +540,5 @@
&ibt {
status = "okay";
};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
index 0d7c6339da46..a68ff0675c28 100644
--- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -112,6 +112,11 @@
&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
};
+&p2a {
+ status = "okay";
+ memory-region = <&vga_memory>;
+};
+
&ibt {
status = "okay";
};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 5d7050d00874..dd4b0b15afcf 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -53,7 +53,7 @@
#size-cells = <1>;
ranges;
- fmc: flash-controller@1e620000 {
+ fmc: spi@1e620000 {
reg = < 0x1e620000 0x94
0x20000000 0x10000000 >;
#address-cells = <1>;
@@ -69,7 +69,7 @@
};
};
- spi: flash-controller@1e630000 {
+ spi: spi@1e630000 {
reg = < 0x1e630000 0x18
0x30000000 0x10000000 >;
#address-cells = <1>;
@@ -165,6 +165,10 @@
compatible = "aspeed,g4-pinctrl";
};
+ p2a: p2a-control {
+ compatible = "aspeed,ast2400-p2a-ctrl";
+ status = "disabled";
+ };
};
rng: hwrng@1e6e2078 {
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 4345c3153ca7..5b1ca265c2ce 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -60,7 +60,7 @@
#size-cells = <1>;
ranges;
- fmc: flash-controller@1e620000 {
+ fmc: spi@1e620000 {
reg = < 0x1e620000 0xc4
0x20000000 0x10000000 >;
#address-cells = <1>;
@@ -86,7 +86,7 @@
};
};
- spi1: flash-controller@1e630000 {
+ spi1: spi@1e630000 {
reg = < 0x1e630000 0xc4
0x30000000 0x08000000 >;
#address-cells = <1>;
@@ -106,7 +106,7 @@
};
};
- spi2: flash-controller@1e631000 {
+ spi2: spi@1e631000 {
reg = < 0x1e631000 0xc4
0x38000000 0x08000000 >;
#address-cells = <1>;
@@ -219,6 +219,11 @@
aspeed,external-nodes = <&gfx &lhc>;
};
+
+ p2a: p2a-control {
+ compatible = "aspeed,ast2500-p2a-ctrl";
+ status = "disabled";
+ };
};
rng: hwrng@1e6e2078 {
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
index 85692c8ef2b1..4ed8500a5cb8 100644
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -42,7 +42,7 @@
clock-frequency = <12000000>;
};
-&slow_osc {
+&clk32k {
atmel,osc-bypass;
};
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 1fa84d2f06c7..7debdeabcf2f 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -14,14 +14,6 @@
chosen {
bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
stdout-path = "serial0:115200n8";
-
- clocksource {
- timer = <&timer0>;
- };
-
- clockevent {
- timer = <&timer1>;
- };
};
memory {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 9483609a2105..691c95ea6175 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1258,30 +1258,11 @@
};
};
- sckc@fffffd50 {
+ clk32k: sckc@fffffd50 {
compatible = "atmel,at91sam9x5-sckc";
reg = <0xfffffd50 0x4>;
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- atmel,startup-time-usec = <1200000>;
- clocks = <&slow_xtal>;
- };
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- atmel,startup-time-usec = <75>;
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
- clk32k: slck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
};
rtc@fffffd20 {
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index e2d38ce43442..8643b7151565 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -868,30 +868,11 @@
status = "disabled";
};
- sckc@fffffd50 {
+ clk32k: sckc@fffffd50 {
compatible = "atmel,at91sam9x5-sckc";
reg = <0xfffffd50 0x4>;
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- atmel,startup-time-usec = <1200000>;
- clocks = <&slow_xtal>;
- };
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- atmel,startup-time-usec = <75>;
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
- clk32k: slck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
};
rtc@fffffd20 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 9b7ce6bb1ddc..ef47c005ef03 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -149,28 +149,11 @@
clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
- sckc@fffffe50 {
+ clk32k: sckc@fffffe50 {
compatible = "atmel,at91sam9x5-sckc";
reg = <0xfffffe50 0x4>;
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- };
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- };
-
- clk32k: slck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc>, <&slow_osc>;
- };
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
};
tcb0: timer@f8008000 {
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 80b6ba4ca50c..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -42,7 +42,7 @@ clocks {
};
/* Cygnus ARM PLL */
- armpll: armpll {
+ armpll: armpll@19000000 {
#clock-cells = <0>;
compatible = "brcm,cygnus-armpll";
clocks = <&osc>;
@@ -67,7 +67,7 @@ clocks {
clock-mult = <1>;
};
- genpll: genpll {
+ genpll: genpll@301d000 {
#clock-cells = <1>;
compatible = "brcm,cygnus-genpll";
reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
@@ -94,7 +94,7 @@ clocks {
clock-mult = <1>;
};
- lcpll0: lcpll0 {
+ lcpll0: lcpll0@301d02c {
#clock-cells = <1>;
compatible = "brcm,cygnus-lcpll0";
reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
@@ -103,7 +103,7 @@ clocks {
"usb_phy", "smart_card", "ch5";
};
- mipipll: mipipll {
+ mipipll: mipipll@180a9800 {
#clock-cells = <1>;
compatible = "brcm,cygnus-mipipll";
reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
@@ -113,7 +113,7 @@ clocks {
"ch5_unused";
};
- asiu_clks: asiu_clks {
+ asiu_clks: asiu_clks@301d048 {
#clock-cells = <1>;
compatible = "brcm,cygnus-asiu-clk";
reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
@@ -122,7 +122,7 @@ clocks {
clock-output-names = "keypad", "adc/touch", "pwm";
};
- audiopll: audiopll {
+ audiopll: audiopll@180aeb00 {
#clock-cells = <1>;
compatible = "brcm,cygnus-audiopll";
reg = <0x180aeb00 0x68>;
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 5f7b46503a51..2dac3efc7640 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -45,7 +45,7 @@
ethernet0 = &eth0;
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0 0>;
};
@@ -69,7 +69,7 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
};
- core {
+ core@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x1000000>;
#address-cells = <1>;
@@ -91,7 +91,7 @@
<0x20100 0x100>;
};
- L2: l2-cache {
+ L2: l2-cache@22000 {
compatible = "arm,pl310-cache";
reg = <0x22000 0x1000>;
cache-unified;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 6925b30c2253..da6d70f09ef1 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -77,7 +77,7 @@
interrupt-affinity = <&cpu0>, <&cpu1>;
};
- mpcore {
+ mpcore@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
@@ -122,7 +122,7 @@
<0x20100 0x100>;
};
- L2: l2-cache {
+ L2: l2-cache@22000 {
compatible = "arm,pl310-cache";
reg = <0x22000 0x1000>;
cache-unified;
@@ -166,7 +166,7 @@
};
};
- axi {
+ axi@18000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x0011c40c>;
#address-cells = <1>;
@@ -415,9 +415,6 @@
"imp_sleep_timer_p5",
"imp_sleep_timer_p7",
"imp_sleep_timer_p8";
- #address-cells = <1>;
- #size-cells = <0>;
-
status = "disabled";
/* ports are defined in board DTS */
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index b99c2e579622..6197e7d80e3b 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -100,7 +100,7 @@
reg-io-width = <4>;
};
- L2: l2-cache {
+ L2: l2-cache@3ff20000 {
compatible = "brcm,bcm11351-a2-pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
@@ -225,21 +225,21 @@
#size-cells = <1>;
ranges;
- root_ccu: root_ccu {
+ root_ccu: root_ccu@35001000 {
compatible = "brcm,bcm11351-root-ccu";
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
- hub_ccu: hub_ccu {
+ hub_ccu: hub_ccu@34000000 {
compatible = "brcm,bcm11351-hub-ccu";
reg = <0x34000000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "tmon_1m";
};
- aon_ccu: aon_ccu {
+ aon_ccu: aon_ccu@35002000 {
compatible = "brcm,bcm11351-aon-ccu";
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
@@ -248,7 +248,7 @@
"pmu_bsc_var";
};
- master_ccu: master_ccu {
+ master_ccu: master_ccu@3f001000 {
compatible = "brcm,bcm11351-master-ccu";
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
@@ -261,7 +261,7 @@
"hsic2_12m";
};
- slave_ccu: slave_ccu {
+ slave_ccu: slave_ccu@3e011000 {
compatible = "brcm,bcm11351-slave-ccu";
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index 8b045cfab64b..be468f4adc37 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -21,7 +21,7 @@
model = "BCM21664 Garnet board";
compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 758daa334148..3cf66faf3b56 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -90,7 +90,7 @@
reg-io-width = <4>;
};
- L2: l2-cache {
+ L2: l2-cache@3ff20000 {
compatible = "arm,pl310-cache";
reg = <0x3ff20000 0x1000>;
cache-unified;
@@ -295,21 +295,21 @@
clock-frequency = <156000000>;
};
- root_ccu: root_ccu {
+ root_ccu: root_ccu@35001000 {
compatible = BCM21664_DT_ROOT_CCU_COMPAT;
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
- aon_ccu: aon_ccu {
+ aon_ccu: aon_ccu@35002000 {
compatible = BCM21664_DT_AON_CCU_COMPAT;
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "hub_timer";
};
- master_ccu: master_ccu {
+ master_ccu: master_ccu@3f001000 {
compatible = BCM21664_DT_MASTER_CCU_COMPAT;
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
@@ -323,7 +323,7 @@
"sdio4_sleep";
};
- slave_ccu: slave_ccu {
+ slave_ccu: slave_ccu@3e011000 {
compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
index 1c66b15f3013..ace77709f468 100644
--- a/arch/arm/boot/dts/bcm23550-sparrow.dts
+++ b/arch/arm/boot/dts/bcm23550-sparrow.dts
@@ -45,7 +45,7 @@
bootargs = "console=ttyS0,115200n8";
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
index 701198f5f498..a36c9b1d23c8 100644
--- a/arch/arm/boot/dts/bcm23550.dtsi
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -371,21 +371,21 @@
clock-frequency = <156000000>;
};
- root_ccu: root_ccu {
+ root_ccu: root_ccu@35001000 {
compatible = BCM21664_DT_ROOT_CCU_COMPAT;
reg = <0x35001000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "frac_1m";
};
- aon_ccu: aon_ccu {
+ aon_ccu: aon_ccu@35002000 {
compatible = BCM21664_DT_AON_CCU_COMPAT;
reg = <0x35002000 0x0f00>;
#clock-cells = <1>;
clock-output-names = "hub_timer";
};
- slave_ccu: slave_ccu {
+ slave_ccu: slave_ccu@3e011000 {
compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
reg = <0x3e011000 0x0f00>;
#clock-cells = <1>;
@@ -398,7 +398,7 @@
"bsc4";
};
- master_ccu: master_ccu {
+ master_ccu: master_ccu@3f001000 {
compatible = BCM21664_DT_MASTER_CCU_COMPAT;
reg = <0x3f001000 0x0f00>;
#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index fbfca83bd28f..ead6e9804dbf 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -21,7 +21,7 @@
model = "BCM28155 AP board";
compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 9777644c6c2b..4b21ddb26aa5 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -431,6 +431,8 @@
reg = <0x7e204000 0x1000>;
interrupts = <2 22>;
clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 6>, <&dma 7>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 1c6f561ac52b..6a96655d8626 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -69,8 +69,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
rfkill {
label = "WiFi";
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index e550799a6ae0..3b0029e61b4c 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -53,8 +53,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
brightness {
label = "Backlight";
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 7bfa2238f70b..90f57bad6b24 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
@@ -99,8 +99,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
index fd361c9b1374..41548d6d479a 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -16,15 +16,13 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
index 7c34360d3285..cd797b4202ad 100644
--- a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -17,15 +17,13 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index 969b8d78e492..e58c8077be1d 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -15,7 +15,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -44,8 +44,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index b62854ee27ab..766db617455b 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -51,8 +51,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 75f7b4ef35da..fed75e6ab58c 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -62,8 +62,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 148d16a9085e..79542e18915c 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -58,8 +58,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index eed3aab6679b..abd35a518046 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -93,8 +93,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
rfkill {
label = "WiFi";
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index fe842f2f1ca7..c29950b43a95 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -59,8 +59,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index 6fcbb0509ba0..4dcec6865469 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -90,8 +90,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
aoss {
label = "AOSS";
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index b3e8cc90b13f..0e349e39f608 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -95,8 +95,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index fdeaa895512f..b9d95011637d 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -15,7 +15,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -44,8 +44,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 0d510cb15ec3..0052e1b24130 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -16,7 +16,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -88,8 +88,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
index 962e89edba11..01c390ed48ea 100644
--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -15,7 +15,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -76,8 +76,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
rfkill {
label = "WiFi";
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
index 658a56ff8a5c..911c65fbf251 100644
--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -19,7 +19,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -85,8 +85,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
index 5fd47eec4407..18d0ae46e76c 100644
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -16,7 +16,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -24,8 +24,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
index 6604be6ff0a0..50f7cd08cfbb 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -16,7 +16,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
@@ -43,8 +43,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index 567ebbd5a0e9..b47fb0700a1f 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -15,7 +15,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -42,8 +42,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
index ac2d136ed334..bcc420f85b56 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -16,7 +16,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
@@ -43,8 +43,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index 74371e821b1a..ac7515423474 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -16,7 +16,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x08000000>;
@@ -83,8 +83,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index b44af63ee310..6d28b7dacd05 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -16,7 +16,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
@@ -58,8 +58,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
index eebc0d43e220..f42a1703f4ab 100644
--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -16,7 +16,7 @@
bootargs = "console=ttyS0,115200";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
@@ -64,8 +64,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
brightness {
label = "Backlight";
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
index 456045f17a00..ac3a4483dcb3 100644
--- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -13,7 +13,7 @@
compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
model = "Phicomm K3";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
@@ -21,8 +21,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
index eb59508578e4..57ca1cfaecd8 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -15,7 +15,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -38,8 +38,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
index 4c71f5e95e00..2e1a7e382cb7 100644
--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -15,7 +15,7 @@
bootargs = "earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -48,8 +48,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
index 5ad53ea52d0a..049cdfd92706 100644
--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -15,7 +15,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -58,8 +58,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
rfkill {
label = "WiFi";
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ac5266ee8d4c..372dc1eb88a0 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -19,7 +19,7 @@
#size-cells = <1>;
interrupt-parent = <&gic>;
- chipcommonA {
+ chipcommonA@18000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18000000 0x00001000>;
#address-cells = <1>;
@@ -44,7 +44,7 @@
};
};
- mpcore {
+ mpcore@19000000 {
compatible = "simple-bus";
ranges = <0x00000000 0x19000000 0x00023000>;
#address-cells = <1>;
@@ -148,7 +148,7 @@
};
};
- usb2_phy: usb2-phy {
+ usb2_phy: usb2-phy@1800c000 {
compatible = "brcm,ns-usb2-phy";
reg = <0x1800c000 0x1000>;
reg-names = "dmu";
@@ -357,7 +357,7 @@
#address-cells = <0>;
};
- mdio-bus-mux {
+ mdio-bus-mux@18003000 {
compatible = "mdio-mux-mmioreg";
mdio-parent-bus = <&mdio>;
#address-cells = <1>;
@@ -464,8 +464,6 @@
srab: srab@18007000 {
compatible = "brcm,bcm5301x-srab";
reg = <0x18007000 0x1000>;
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
index b29695bd4855..4af8e3293cff 100644
--- a/arch/arm/boot/dts/bcm53573.dtsi
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -32,7 +32,7 @@
};
};
- mpcore {
+ mpcore@18310000 {
compatible = "simple-bus";
ranges = <0x00000000 0x18310000 0x00008000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index e6a41e1b27fd..9c0325cf9e22 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -41,9 +41,6 @@
};
clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
/* UBUS peripheral clock */
periph_clk: periph_clk {
#clock-cells = <0>;
@@ -94,7 +91,7 @@
reg = <0x1e000 0x100>;
};
- gic: interrupt-controller@1e100 {
+ gic: interrupt-controller@1f000 {
compatible = "arm,cortex-a9-gic";
reg = <0x1f000 0x1000
0x1e100 0x100>;
@@ -125,7 +122,7 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
- armpll: armpll {
+ armpll: armpll@20000 {
#clock-cells = <0>;
compatible = "brcm,bcm63138-armpll";
clocks = <&periph_clk>;
@@ -144,7 +141,7 @@
#reset-cells = <2>;
};
- ahci: sata@8000 {
+ ahci: sata@a000 {
compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
reg-names = "ahci", "top-ctrl";
reg = <0xa000 0x9ac>, <0x8040 0x24>;
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 8006c69a3fdf..8313b7cad542 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -6,7 +6,7 @@
model = "Broadcom STB (bcm7445), SVMB reference board";
compatible = "brcm,bcm7445", "brcm,brcmstb";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00 0x00000000 0x00 0x40000000>,
<0x00 0x40000000 0x00 0x40000000>,
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 504a63236a5e..58f67c9b830b 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -63,7 +63,7 @@
<GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
};
- rdb {
+ rdb@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
@@ -224,7 +224,7 @@
};
- memory_controllers {
+ memory_controllers@f1100000 {
compatible = "simple-bus";
ranges = <0x0 0x0 0xf1100000 0x200000>;
#address-cells = <1>;
@@ -252,7 +252,7 @@
};
};
- memc@1 {
+ memc@80000 {
compatible = "brcm,brcmstb-memc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -274,7 +274,7 @@
};
};
- memc@2 {
+ memc@100000 {
compatible = "brcm,brcmstb-memc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 53f990defd6a..b2d323f4a5ab 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -49,8 +49,6 @@
gpio_keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
hook {
label = "HOOK";
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
index 4991700ae6b0..b0b8c774a37f 100644
--- a/arch/arm/boot/dts/bcm947189acdbmr.dts
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -17,7 +17,7 @@
bootargs = "console=ttyS0,115200 earlycon";
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>;
};
@@ -43,8 +43,6 @@
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
restart {
label = "Reset";
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
index 250a1d6f2d05..957468224622 100644
--- a/arch/arm/boot/dts/bcm953012er.dts
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -39,15 +39,13 @@
model = "NorthStar Enterprise Router (BCM953012ER)";
compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
gpio-keys {
compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
wps {
label = "WPS";
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
index 52c4c6c9d3f1..046c59fb4846 100644
--- a/arch/arm/boot/dts/bcm953012k.dts
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -43,7 +43,7 @@
serial1 = &uart1;
};
- memory {
+ memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 21479b4ce823..8c388eb8a08f 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index cda3d790965b..c339771bb22e 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index f86649812b59..1c72ec8288de 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index df60602b054d..96a021cebd97 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index 3893e7af343a..b2c7f21d471e 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index cf226b02141f..a2c9de35ddfb 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x20000000>;
};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 10b3d512bb33..3fcca12d83c2 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -42,7 +42,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 29525686e51a..5b177274f182 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -16,7 +16,7 @@
stdout-path = &serial0;
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x0 0x08000000>;
};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index e39db14d805e..edd0f630e025 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -43,7 +43,7 @@
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f2d2b872333e..5b2b1ed04d51 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -188,6 +188,19 @@
};
};
+&cpu {
+ cpu-supply = <&vdcdc3_reg>;
+};
+
+/*
+ * The standard da850-evm kits and SOM's are 375MHz so enable this operating
+ * point by default. Higher frequencies must be enabled for custom boards with
+ * other variants of the SoC.
+ */
+&opp_375 {
+ status = "okay";
+};
+
&sata {
status = "okay";
};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 2fd2a6838dab..e379d6e7ad49 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -154,12 +154,48 @@
};
};
};
+
+ cvdd: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cvdd";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&ref_clk {
clock-frequency = <24000000>;
};
+&cpu {
+ cpu-supply = <&cvdd>;
+};
+
+/*
+ * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are
+ * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we
+ * can't enable more than one OPP by default, since the controller sometimes
+ * becomes unresponsive after a transition. Fix the frequency at 456 MHz.
+ */
+
+&opp_100 {
+ status = "disabled";
+};
+
+&opp_200 {
+ status = "disabled";
+};
+
+&opp_300 {
+ status = "disabled";
+};
+
+&opp_456 {
+ status = "okay";
+};
+
&pmx_core {
status = "okay";
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
index 09c3666def66..afd04a423856 100644
--- a/arch/arm/boot/dts/da850-lego-ev3.dts
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -122,6 +122,15 @@
amp-supply = <&amp>;
};
+ cvdd: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "cvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
/*
* This is a 5V current limiting regulator that is shared by USB,
* the sensor (input) ports, the motor (output) ports and the A/DC.
@@ -201,6 +210,27 @@
clock-frequency = <24000000>;
};
+&cpu {
+ cpu-supply = <&cvdd>;
+};
+
+/* since we have a fixed regulator, we can't run at these points */
+&opp_100 {
+ status = "disabled";
+};
+
+&opp_200 {
+ status = "disabled";
+};
+
+/*
+ * The SoC is actually the 456MHz version, but because of the fixed regulator
+ * This is the fastest we can go.
+ */
+&opp_375 {
+ status = "okay";
+};
+
&pmx_core {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index e6e78b88cacb..7cf31b6e48b7 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -16,6 +16,56 @@
reg = <0xc0000000 0x0>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu: cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0>;
+ clocks = <&psc0 14>;
+ operating-points-v2 = <&opp_table>;
+ };
+ };
+
+ opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp_100: opp100-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <1000000 950000 1050000>;
+ };
+
+ opp_200: opp110-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1100000 1050000 1160000>;
+ };
+
+ opp_300: opp120-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1200000 1140000 1320000>;
+ };
+
+ /*
+ * Original silicon was 300MHz max, so higher frequencies
+ * need to be enabled on a per-board basis if the chip is
+ * capable.
+ */
+
+ opp_375: opp120-375000000 {
+ status = "disabled";
+ opp-hz = /bits/ 64 <375000000>;
+ opp-microvolt = <1200000 1140000 1320000>;
+ };
+
+ opp_456: opp130-456000000 {
+ status = "disabled";
+ opp-hz = /bits/ 64 <456000000>;
+ opp-microvolt = <1300000 1250000 1350000>;
+ };
+ };
+
arm {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index abfff54d6de5..0a27f034dd6b 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial1:115200n8";
};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index ace50e194a45..dee35e3a5c4b 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -59,6 +59,11 @@
cpu0-supply = <&buck2_reg>;
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index e25765500e99..248bd372fe70 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -172,6 +172,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 7479993755da..86c26a4edfd7 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -244,6 +244,11 @@
};
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&i2c_0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 8ce3a7786b19..5659c4a10729 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -462,6 +462,39 @@
status = "disabled";
};
+ gpu: gpu@13000000 {
+ compatible = "samsung,exynos4210-mali", "arm,mali-400";
+ reg = <0x13000000 0x10000>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ clocks = <&cmu CLK_G3D>,
+ <&cmu CLK_SCLK_G3D>;
+ clock-names = "bus", "core";
+ power-domains = <&pd_g3d>;
+ status = "disabled";
+ /* TODO: operating points for DVFS, assigned clock as 134 MHz */
+ };
+
mfc: codec@13400000 {
compatible = "samsung,mfc-v7";
reg = <0x13400000 0x10000>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 36ccf227434d..1264cc431ff6 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -54,7 +54,7 @@
pmu: pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&combiner>;
- interrupts = <2 2>, <3 2>;
+ status = "disabled";
};
soc: soc {
@@ -415,6 +415,20 @@
};
};
+ gpu: gpu@13000000 {
+ compatible = "samsung,exynos4210-mali", "arm,mali-400";
+ reg = <0x13000000 0x10000>;
+ /*
+ * CLK_G3D is not actually bus clock but a IP-level clock.
+ * The bus clock is not described in hardware manual.
+ */
+ clocks = <&clock CLK_G3D>,
+ <&clock CLK_SCLK_G3D>;
+ clock-names = "bus", "core";
+ power-domains = <&pd_g3d>;
+ status = "disabled";
+ };
+
i2s1: i2s@13960000 {
compatible = "samsung,s3c6410-i2s";
reg = <0x13960000 0x100>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 36b1edea254a..0d1e1a9c2f6e 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -132,6 +132,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck3_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo3_reg>;
vusb_a-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 6882480dbaf7..7c39dd1c4d3a 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -239,6 +239,10 @@
status = "okay";
};
+&gpu {
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&vusb_reg>;
vusb_a-supply = <&vusbdac_reg>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index bf092e97e14f..82a8b5449978 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -262,6 +262,11 @@
};
};
+&gpu {
+ mali-supply = <&buck2_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b491c345b2e8..f220716239db 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -8,7 +8,7 @@
* www.linaro.org
*
* Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
* bindings.
*
* Note: This file does not include device nodes for all the controllers in
@@ -381,13 +381,13 @@
trips {
cpu_alert0: cpu-alert-0 {
- temperature = <85000>; /* millicelsius */
+ temperature = <85000>; /* millicelsius */
};
cpu_alert1: cpu-alert-1 {
- temperature = <100000>; /* millicelsius */
+ temperature = <100000>; /* millicelsius */
};
cpu_alert2: cpu-alert-2 {
- temperature = <110000>; /* millicelsius */
+ temperature = <110000>; /* millicelsius */
};
};
};
@@ -449,6 +449,43 @@
samsung,lcd-wb;
};
+&gpu {
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3";
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <1050000>;
+ };
+ };
+};
+
&mdma1 {
power-domains = <&pd_lcd0>;
};
@@ -461,6 +498,12 @@
<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
};
+&pmu {
+ interrupts = <2 2>, <3 2>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ status = "okay";
+};
+
&pmu_system_controller {
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
"clkout4", "clkout8", "clkout9";
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 30eee5942eff..ce87d2ff27aa 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -15,6 +15,24 @@
i2c10 = &i2c_cm36651;
};
+ aat1290 {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ flash-led {
+ label = "flash";
+ led-max-microamp = <520833>;
+ flash-max-microamp = <1012500>;
+ flash-max-timeout-us = <1940000>;
+ };
+ };
+
lcd_vdd3_reg: voltage-regulator-6 {
compatible = "regulator-fixed";
regulator-name = "LCD_VDD_2.2V";
@@ -131,6 +149,20 @@
regulator-max-microvolt = <2800000>;
};
+&pinctrl_0 {
+ camera_flash_host: camera-flash-host {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-val = <0>;
+ };
+
+ camera_flash_isp: camera-flash-isp {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-val = <1>;
+ };
+};
+
&s5c73m3 {
standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
vdda-supply = <&ldo17_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index 0038465f38f1..462a5409b1de 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -115,6 +115,11 @@
cpu0-supply = <&buck2_reg>;
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&hsotg {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 4c15cb616cdf..83be3a797411 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -453,6 +453,11 @@
status = "okay";
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 08d3a0a7b4eb..ea55f377d17c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -229,6 +229,11 @@
assigned-clock-rates = <0>, <176000000>;
};
+&gpu {
+ mali-supply = <&buck4_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
index d83fbd4e434c..3731a225f779 100644
--- a/arch/arm/boot/dts/exynos4412-prime.dtsi
+++ b/arch/arm/boot/dts/exynos4412-prime.dtsi
@@ -38,3 +38,10 @@
cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
<&cpu2 15 15>, <&cpu3 15 15>;
};
+
+&gpu_opp_table {
+ opp-533000000 {
+ opp-hz = /bits/ 64 <533000000>;
+ opp-microvolt = <1075000>;
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index e5c041ec0756..d20db2dfe8e2 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -716,6 +716,53 @@
cpu-offset = <0x4000>;
};
+&gpu {
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <875000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <950000>;
+ };
+ opp-440000000 {
+ opp-hz = /bits/ 64 <440000000>;
+ opp-microvolt = <1025000>;
+ };
+ };
+};
+
&hdmi {
compatible = "samsung,exynos4212-hdmi";
};
@@ -737,6 +784,8 @@
&pmu {
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ status = "okay";
};
&pmu_system_controller {
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 8f9e08f940ab..e0db251e253f 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -85,6 +85,11 @@
};
};
+&adc {
+ vdd-supply = <&ldo10_reg>;
+ status = "okay";
+};
+
&audi2s0 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 57fc9c949e54..e6f78b1cee7c 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -260,6 +260,12 @@
};
};
+&adc {
+ clocks = <&clock CLK_TSADC>;
+ clock-names = "adc";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
&arm_a15_pmu {
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
status = "okay";
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dbf0306896f6..592d7b45ecc8 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -386,6 +386,10 @@
* (Linaro for Arndale Octa, v2012.07).
*/
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo4_reg: LDO4 {
@@ -411,6 +415,10 @@
regulator-name = "PVDD_ANAIP_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo8_reg: LDO8 {
@@ -451,6 +459,10 @@
regulator-name = "PVDD_APIO_MMCOFF_2V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo14_reg: LDO14 {
@@ -464,12 +476,20 @@
regulator-name = "PVDD_PERI_2V8";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo16_reg: LDO16 {
regulator-name = "PVDD_PERI_3V3";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo17_reg: LDO17 {
@@ -483,12 +503,28 @@
regulator-name = "PVDD_EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ /*
+ * Must stay in "off" mode during shutdown for
+ * proper eMMC reset. The "off" mode is in
+ * fact controlled by LDO18EN. The eMMC does
+ * not have reset pin connected so the reset
+ * will be triggered by falling edge of
+ * LDO18EN.
+ */
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo19_reg: LDO19 {
regulator-name = "PVDD_TFLASH_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo20_reg: LDO20 {
@@ -515,12 +551,20 @@
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo24_reg: LDO24 {
regulator-name = "PVDD_CAM1_AVDD_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo25_reg: LDO25 {
@@ -540,6 +584,10 @@
regulator-name = "PVDD_G3DS_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo28_reg: LDO28 {
@@ -615,55 +663,75 @@
buck1_reg: BUCK1 {
regulator-name = "PVDD_MIF_1V1";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
regulator-name = "PVDD_INT_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
regulator-name = "PVDD_G3D_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
regulator-name = "PVDD_LPDDR3_1V2";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
regulator-always-on;
};
buck6_reg: BUCK6 {
regulator-name = "PVDD_KFC_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
regulator-name = "VIN_LLDO_1V4";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "VIN_MLDO_2V0";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2000000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
regulator-always-on;
};
@@ -678,6 +746,18 @@
regulator-name = "PVDD_EMMCF_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ /*
+ * Must stay in "off" mode during shutdown for
+ * proper eMMC reset. The "off" mode is in
+ * fact controlled by BUCK10EN. The eMMC does
+ * not have reset pin connected so the reset
+ * will be triggered by falling edge of
+ * BUCK10EN.
+ */
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
};
@@ -700,7 +780,7 @@
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
- vmmc-supply = <&ldo10_reg>;
+ vmmc-supply = <&ldo18_reg>;
vqmmc-supply = <&ldo3_reg>;
bus-width = <8>;
cap-mmc-highspeed;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 5fb2326875dc..55d4dbf6f83a 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -42,117 +42,119 @@
* by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
*/
- soc: soc {
- cluster_a15_opp_table: opp_table0 {
- compatible = "operating-points-v2";
- opp-shared;
- opp-1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1250000>;
- clock-latency-ns = <140000>;
- };
- opp-1700000000 {
- opp-hz = /bits/ 64 <1700000000>;
- opp-microvolt = <1212500>;
- clock-latency-ns = <140000>;
- };
- opp-1600000000 {
- opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <1175000>;
- clock-latency-ns = <140000>;
- };
- opp-1500000000 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1137500>;
- clock-latency-ns = <140000>;
- };
- opp-1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-microvolt = <1112500>;
- clock-latency-ns = <140000>;
- };
- opp-1300000000 {
- opp-hz = /bits/ 64 <1300000000>;
- opp-microvolt = <1062500>;
- clock-latency-ns = <140000>;
- };
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1037500>;
- clock-latency-ns = <140000>;
- };
- opp-1100000000 {
- opp-hz = /bits/ 64 <1100000000>;
- opp-microvolt = <1012500>;
- clock-latency-ns = <140000>;
- };
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = < 987500>;
- clock-latency-ns = <140000>;
- };
- opp-900000000 {
- opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = < 962500>;
- clock-latency-ns = <140000>;
- };
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = < 937500>;
- clock-latency-ns = <140000>;
- };
- opp-700000000 {
- opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = < 912500>;
- clock-latency-ns = <140000>;
- };
+ cluster_a15_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1175000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = < 987500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = < 962500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = < 937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = < 912500>;
+ clock-latency-ns = <140000>;
};
+ };
- cluster_a7_opp_table: opp_table1 {
- compatible = "operating-points-v2";
- opp-shared;
- opp-1300000000 {
- opp-hz = /bits/ 64 <1300000000>;
- opp-microvolt = <1275000>;
- clock-latency-ns = <140000>;
- };
- opp-1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1212500>;
- clock-latency-ns = <140000>;
- };
- opp-1100000000 {
- opp-hz = /bits/ 64 <1100000000>;
- opp-microvolt = <1162500>;
- clock-latency-ns = <140000>;
- };
- opp-1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <1112500>;
- clock-latency-ns = <140000>;
- };
- opp-900000000 {
- opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = <1062500>;
- clock-latency-ns = <140000>;
- };
- opp-800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1025000>;
- clock-latency-ns = <140000>;
- };
- opp-700000000 {
- opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = <975000>;
- clock-latency-ns = <140000>;
- };
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <937500>;
- clock-latency-ns = <140000>;
- };
+ cluster_a7_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1275000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1162500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
};
+ };
+ soc: soc {
cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
@@ -548,18 +550,6 @@
status = "disabled";
};
- adc: adc@12d10000 {
- compatible = "samsung,exynos-adc-v2";
- reg = <0x12D10000 0x100>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clock CLK_TSADC>;
- clock-names = "adc";
- #io-channel-cells = <1>;
- io-channel-ranges;
- samsung,syscon-phandle = <&pmu_system_controller>;
- status = "disabled";
- };
-
hsi2c_8: i2c@12e00000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E00000 0x1000>;
@@ -1363,6 +1353,12 @@
};
};
+&adc {
+ clocks = <&clock CLK_TSADC>;
+ clock-names = "adc";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
&dp {
clocks = <&clock CLK_DP1>;
clock-names = "dp";
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index 25d95de15c9b..829147e320e0 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -177,6 +177,10 @@
regulator-name = "vdd_adc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo5_reg: LDO5 {
@@ -184,6 +188,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo6_reg: LDO6 {
@@ -191,6 +199,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
@@ -198,6 +210,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo8_reg: LDO8 {
@@ -205,6 +221,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: LDO9 {
@@ -212,6 +232,10 @@
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo10_reg: LDO10 {
@@ -219,6 +243,10 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
@@ -226,6 +254,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo12_reg: LDO12 {
@@ -239,6 +271,10 @@
regulator-name = "vddq_mmc2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo14_reg: LDO14 {
@@ -253,6 +289,10 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo16_reg: LDO16 {
@@ -267,18 +307,30 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo18_reg: LDO18 {
regulator-name = "vdd_emmc_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo19_reg: LDO19 {
regulator-name = "vdd_sd";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo20_reg: LDO20 {
@@ -307,6 +359,10 @@
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo24_reg: LDO24 {
@@ -328,6 +384,10 @@
regulator-name = "vdd_ldo26";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3950000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo27_reg: LDO27 {
@@ -335,6 +395,10 @@
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo28_reg: LDO28 {
@@ -342,6 +406,10 @@
regulator-name = "vdd_ldo28";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3950000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo29_reg: LDO29 {
@@ -420,6 +488,10 @@
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
@@ -428,6 +500,10 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
@@ -436,6 +512,10 @@
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
@@ -444,6 +524,10 @@
regulator-max-microvolt = <1400000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
@@ -460,20 +544,24 @@
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
+ regulator-name = "vdd_1.35v_ldo";
+ regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2000000>;
+ regulator-name = "vdd_2.0v_ldo";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
regulator-always-on;
regulator-boot-on;
};
@@ -484,14 +572,20 @@
regulator-max-microvolt = <3750000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck10_reg: BUCK10 {
regulator-name = "vdd_vmem";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 93a48f2dda49..838872037493 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -360,6 +360,12 @@
};
};
+&buck10_reg {
+ /* Supplies vmmc-supply of mmc_0 */
+ regulator-always-on;
+ regulator-boot-on;
+};
+
&hdmi {
status = "okay";
ddc = <&i2c_2>;
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index ae866bcc30c4..0b27bebf9528 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -96,6 +96,15 @@
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
+ adc: adc@12d10000 {
+ compatible = "samsung,exynos-adc-v2";
+ reg = <0x12d10000 0x100>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ status = "disabled";
+ };
+
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c@12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index 3613f05f8a80..bfaa2de63a10 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -64,7 +64,7 @@
gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
- cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
num-chipselects = <1>;
panel: display@0 {
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index bf0cb55809f8..4263a9339c2e 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -347,7 +347,7 @@
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@@ -382,7 +382,7 @@
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@@ -417,7 +417,7 @@
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@@ -451,7 +451,7 @@
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@@ -482,7 +482,7 @@
};
funnel@0,e3c41000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xe3c41000 0 0x1000>;
clocks = <&clk_375m>;
@@ -531,7 +531,7 @@
};
funnel@0,e3c81000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xe3c81000 0 0x1000>;
clocks = <&clk_375m>;
@@ -580,7 +580,7 @@
};
funnel@0,e3cc1000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xe3cc1000 0 0x1000>;
clocks = <&clk_375m>;
@@ -629,7 +629,7 @@
};
funnel@0,e3d01000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xe3d01000 0 0x1000>;
clocks = <&clk_375m>;
@@ -678,7 +678,7 @@
};
funnel@0,e3c04000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xe3c04000 0 0x1000>;
clocks = <&clk_375m>;
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
new file mode 100644
index 000000000000..2abc42eda7b0
--- /dev/null
+++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+
+&fsi {
+ cfam@0,0 {
+ reg = <0 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <0>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ };
+
+ cfam0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ };
+
+ cfam0_i2c2: i2c-bus@2 {
+ reg = <2>;
+ };
+
+ cfam0_i2c3: i2c-bus@3 {
+ reg = <3>;
+ };
+
+ cfam0_i2c4: i2c-bus@4 {
+ reg = <4>;
+ };
+
+ cfam0_i2c5: i2c-bus@5 {
+ reg = <5>;
+ };
+
+ cfam0_i2c6: i2c-bus@6 {
+ reg = <6>;
+ };
+
+ cfam0_i2c7: i2c-bus@7 {
+ reg = <7>;
+ };
+
+ cfam0_i2c8: i2c-bus@8 {
+ reg = <8>;
+ };
+
+ cfam0_i2c9: i2c-bus@9 {
+ reg = <9>;
+ };
+
+ cfam0_i2c10: i2c-bus@a {
+ reg = <10>;
+ };
+
+ cfam0_i2c11: i2c-bus@b {
+ reg = <11>;
+ };
+
+ cfam0_i2c12: i2c-bus@c {
+ reg = <12>;
+ };
+
+ cfam0_i2c13: i2c-bus@d {
+ reg = <13>;
+ };
+
+ cfam0_i2c14: i2c-bus@e {
+ reg = <14>;
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ0: occ {
+ compatible = "ibm,p9-occ";
+ };
+ };
+
+ fsi_hub0: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+};
+
+&fsi_hub0 {
+ cfam@1,0 {
+ reg = <1 0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chip-id = <1>;
+
+ scom@1000 {
+ compatible = "ibm,fsi2pib";
+ reg = <0x1000 0x400>;
+ };
+
+ i2c@1800 {
+ compatible = "ibm,fsi-i2c-master";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cfam1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ };
+
+ cfam1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ };
+
+ cfam1_i2c2: i2c-bus@2 {
+ reg = <2>;
+ };
+
+ cfam1_i2c3: i2c-bus@3 {
+ reg = <3>;
+ };
+
+ cfam1_i2c4: i2c-bus@4 {
+ reg = <4>;
+ };
+
+ cfam1_i2c5: i2c-bus@5 {
+ reg = <5>;
+ };
+
+ cfam1_i2c6: i2c-bus@6 {
+ reg = <6>;
+ };
+
+ cfam1_i2c7: i2c-bus@7 {
+ reg = <7>;
+ };
+
+ cfam1_i2c8: i2c-bus@8 {
+ reg = <8>;
+ };
+
+ cfam1_i2c9: i2c-bus@9 {
+ reg = <9>;
+ };
+
+ cfam1_i2c10: i2c-bus@a {
+ reg = <10>;
+ };
+
+ cfam1_i2c11: i2c-bus@b {
+ reg = <11>;
+ };
+
+ cfam1_i2c12: i2c-bus@c {
+ reg = <12>;
+ };
+
+ cfam1_i2c13: i2c-bus@d {
+ reg = <13>;
+ };
+
+ cfam1_i2c14: i2c-bus@e {
+ reg = <14>;
+ };
+ };
+
+ sbefifo@2400 {
+ compatible = "ibm,p9-sbefifo";
+ reg = <0x2400 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fsi_occ1: occ {
+ compatible = "ibm,p9-occ";
+ };
+ };
+
+ fsi_hub1: hub@3400 {
+ compatible = "fsi-master-hub";
+ reg = <0x3400 0x400>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ no-scan-on-init;
+ };
+ };
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+ reg = <1>;
+};
+
+&fsi_occ1 {
+ reg = <2>;
+};
+
+/ {
+ aliases {
+ i2c100 = &cfam0_i2c0;
+ i2c101 = &cfam0_i2c1;
+ i2c102 = &cfam0_i2c2;
+ i2c103 = &cfam0_i2c3;
+ i2c104 = &cfam0_i2c4;
+ i2c105 = &cfam0_i2c5;
+ i2c106 = &cfam0_i2c6;
+ i2c107 = &cfam0_i2c7;
+ i2c108 = &cfam0_i2c8;
+ i2c109 = &cfam0_i2c9;
+ i2c110 = &cfam0_i2c10;
+ i2c111 = &cfam0_i2c11;
+ i2c112 = &cfam0_i2c12;
+ i2c113 = &cfam0_i2c13;
+ i2c114 = &cfam0_i2c14;
+ i2c200 = &cfam1_i2c0;
+ i2c201 = &cfam1_i2c1;
+ i2c202 = &cfam1_i2c2;
+ i2c203 = &cfam1_i2c3;
+ i2c204 = &cfam1_i2c4;
+ i2c205 = &cfam1_i2c5;
+ i2c206 = &cfam1_i2c6;
+ i2c207 = &cfam1_i2c7;
+ i2c208 = &cfam1_i2c8;
+ i2c209 = &cfam1_i2c9;
+ i2c210 = &cfam1_i2c10;
+ i2c211 = &cfam1_i2c11;
+ i2c212 = &cfam1_i2c12;
+ i2c213 = &cfam1_i2c13;
+ i2c214 = &cfam1_i2c14;
+ };
+};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index f0a3fde0739c..10acc5331ba6 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -10,6 +10,25 @@
model = "MENLO M53 EMBEDDED DEVICE";
compatible = "menlo,m53menlo", "fsl,imx53";
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pinctrl_power_button>;
+ pinctrl-names = "default";
+
+ power-button {
+ label = "Power button";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pinctrl_power_out>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
@@ -30,7 +49,7 @@
eth {
label = "EthLedYe";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "none";
+ linux,default-trigger = "netdev";
};
};
@@ -45,12 +64,19 @@
};
};
+ beeper {
+ compatible = "gpio-beeper";
+ pinctrl-0 = <&pinctrl_beeper>;
+ gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+ };
+
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
regulator-name = "vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
@@ -74,6 +100,25 @@
assigned-clock-rates = <133333334>, <33333334>, <33333334>;
};
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ spidev@0 {
+ compatible = "menlo,m53cpld";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+
+ spidev@1 {
+ compatible = "menlo,m53cpld";
+ spi-max-frequency = <25000000>;
+ reg = <1>;
+ };
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
@@ -86,9 +131,82 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
+ phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&gpio1 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "TestPin_SV2_3", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+ "", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "CPLD_JTAG_TCK", "KBD_intK",
+ "CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+ "CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+ "CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+ gpio-line-names =
+ "", "", "", "",
+ "CPLD_reset", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio7 {
+ gpio-line-names =
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "USB-OTG_OverCurrent", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -136,27 +254,37 @@
imx53-m53evk {
hoggrp {
fsl,pins = <
- MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
- MX53_PAD_EIM_EB3__GPIO2_31 0x1d5
- MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5
- MX53_PAD_GPIO_19__CCM_CLKO 0x1d5
- MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5
- MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5
- MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5
- MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5
- MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5
- MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5
- MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5
- MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5
- MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5
- MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5
+ MX53_PAD_GPIO_19__CCM_CLKO 0x1e4
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4
+ MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4
+ MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4
+ MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4
+ MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4
+ MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4
+ MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+ MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+ MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4
+ MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4
+ MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
- MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5
- MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5
+ MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4
+ >;
+ };
+
+ pinctrl_beeper: beepergrp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4
>;
};
@@ -169,49 +297,66 @@
pinctrl_can2: can2grp {
fsl,pins = <
- MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4
+ MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4
MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4
>;
};
pinctrl_display_gpio: display-gpiogrp {
fsl,pins = <
- MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */
- MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */
+ MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */
+ MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */
+
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */
>;
};
pinctrl_edt_ft5x06: edt-ft5x06grp {
fsl,pins = <
- MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */
- MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */
- MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */
+ MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */
+ MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */
+ MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4
+ MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4
+ MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4
+ MX53_PAD_EIM_RW__GPIO2_26 0xe4
+ MX53_PAD_EIM_LBA__GPIO2_27 0xe4
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
- MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
- MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
- MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
- MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
- MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
- MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4
+ MX53_PAD_GPIO_1__GPIO1_1 0x1c4
+ MX53_PAD_GPIO_9__GPIO1_9 0x1e4
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
- MX53_PAD_FEC_MDC__FEC_MDC 0x4
- MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc
- MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180
- MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180
- MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180
- MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180
- MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180
- MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4
- MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4
- MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4
+ MX53_PAD_FEC_MDC__FEC_MDC 0x1e4
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
>;
};
@@ -240,10 +385,24 @@
>;
};
+ pinctrl_power_button: powerbutgrp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4
+ >;
+ };
+
+ pinctrl_power_out: poweroutgrp {
+ fsl,pins = <
+ MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4
MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
+ MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4
+ MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4
>;
};
@@ -251,13 +410,25 @@
fsl,pins = <
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4
+ MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
>;
};
pinctrl_usb: usbgrp {
fsl,pins = <
- MX53_PAD_GPIO_2__GPIO1_2 0x1d5
- MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5
+ MX53_PAD_GPIO_2__GPIO1_2 0x1c4
+ MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4
+ MX53_PAD_GPIO_4__GPIO1_4 0x1c4
+ MX53_PAD_GPIO_18__GPIO7_13 0x1c4
>;
};
};
@@ -287,12 +458,21 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ linux,rs485-enabled-at-boot-time;
status = "okay";
};
@@ -301,7 +481,7 @@
pinctrl-0 = <&pinctrl_usb>;
vbus-supply = <&reg_usbh1_vbus>;
phy_type = "utmi";
- dr_mode = "peripheral";
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 09071ca11c6c..ec9fb8940ffa 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -185,6 +185,31 @@
>;
};
+ pinctrl_ipu_csi0: ipucsi0grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4
+ MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4
+ MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4
+ MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4
+ MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4
+ MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4
+ MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4
+ MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4
+ MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
+ MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4
+ MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4
+ MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
+ >;
+ };
+
+ pinctrl_ov5642: ov5642grp {
+ fsl,pins = <
+ MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4
+ MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
@@ -256,11 +281,47 @@
camera: ov5642@3c {
compatible = "ovti,ov5642";
reg = <0x3c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ov5642>;
+ assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
+ <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
+ assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
+ <&clks IMX5_CLK_SSI_EXT1_PODF>;
+ assigned-clock-rates = <0>, <24000000>;
+ clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+ clock-names = "xclk";
+ DVDD-supply = <&ldo9_reg>;
+ AVDD-supply = <&ldo7_reg>;
+ reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+ port {
+ ov5642_to_ipu_csi0: endpoint {
+ remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+ bus-width = <8>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
};
pmic: dialog@48 {
compatible = "dlg,da9053", "dlg,da9052";
reg = <0x48>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ ldo7_reg: ldo7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3650000>;
+ };
+ };
};
};
@@ -271,3 +332,15 @@
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
+
+&ipu_csi0_from_parallel_sensor {
+ remote-endpoint = <&ov5642_to_ipu_csi0>;
+ data-shift = <12>; /* Lines 19:12 used */
+ hsync-active = <1>;
+ vsync-active = <1>;
+};
+
+&ipu_csi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu_csi0>;
+};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 9b672ed2486d..ed341cfd9d09 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -31,6 +31,7 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ ipu0 = &ipu;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
mmc2 = &esdhc3;
@@ -71,6 +72,11 @@
ports = <&ipu_di0>, <&ipu_di1>;
};
+ capture_subsystem {
+ compatible = "fsl,imx-capture-subsystem";
+ ports = <&ipu_csi0>, <&ipu_csi1>;
+ };
+
tzic: tz-interrupt-controller@fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
@@ -158,10 +164,16 @@
ipu_csi0: port@0 {
reg = <0>;
+
+ ipu_csi0_from_parallel_sensor: endpoint {
+ };
};
ipu_csi1: port@1 {
reg = <1>;
+
+ ipu_csi1_from_parallel_sensor: endpoint {
+ };
};
ipu_di0: port@2 {
diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..a864fdbd5f16
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+
+/ {
+ model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+ compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..2618eccfe50d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Kontron SMARC sAMX6i Quad/Dual";
+ compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
+
+/* Quad/Dual SoMs have 3 chip-select signals */
+&ecspi4 {
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
+ <&gpio3 29 GPIO_ACTIVE_HIGH>,
+ <&gpio3 25 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl_ecspi4 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+ /* SPI4_IMX_CS2# - connected to internal flash */
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+ /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+ /* SPI4_CS3# - connected to SMARC SPI0_CS1# */
+ MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
+ >;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..81c7ebb4b3fb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -0,0 +1,815 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2017 (C) Priit Laes <plaes@plaes.org>
+ * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de>
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ *
+ * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ reg_1p0v_s0: regulator-1p0v-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V0_S0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_smarc_suppy>;
+ };
+
+ reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V35_VCOREDIG_S5";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_3p3v_s5>;
+ };
+
+ reg_1p8v_s5: regulator-1p8v-s5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_1V8_S5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_3p3v_s5>;
+ };
+
+ reg_3p3v_s0: regulator-3p3v-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_S0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_3p3v_s5>;
+ };
+
+ reg_3p3v_s0: regulator-3p3v-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_S0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_3p3v_s5>;
+ };
+
+ reg_3p3v_s5: regulator-3p3v-s5 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_3V3_S5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&reg_smarc_suppy>;
+ };
+
+ reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdbklt_en>;
+ regulator-name = "LCD_BKLT_EN";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdvdd_en>;
+ regulator-name = "LCD_VDD_EN";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_smarc_rtc: regulator-smarc-rtc {
+ compatible = "regulator-fixed";
+ regulator-name = "V_IN_RTC_BATT";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* Module supply range can be 3.00V ... 5.25V */
+ reg_smarc_suppy: regulator-smarc-supply {
+ compatible = "regulator-fixed";
+ regulator-name = "V_IN_WIDE";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lcd: lcd {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd>;
+ status = "disabled";
+
+ port@0 {
+ reg = <0>;
+
+ lcd_in: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lcd_out: endpoint {
+ };
+ };
+ };
+
+ lcd_backlight: lcd-backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm4 0 5000000>;
+ pwm-names = "LCD_BKLT_PWM";
+
+ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <4>;
+
+ power-supply = <&reg_smarc_lcdbklt>;
+ status = "disabled";
+ };
+
+ i2c_intern: i2c-gpio-intern {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
+ sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c_lcd: i2c-gpio-lcd {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
+ sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabld";
+ };
+
+ i2c_cam: i2c-gpio-cam {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
+ sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabld";
+ };
+};
+
+/* I2S0, I2S1 */
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+
+ audmux_ssi1 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
+ IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
+ >;
+ };
+
+ audmux_adu3 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT3>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+ >;
+ };
+
+ audmux_ssi2 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+ IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR)
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+ >;
+ };
+
+ audmux_adu4 {
+ fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
+ >;
+ };
+};
+
+/* CAN0 */
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* CAN1 */
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* SPI1 */
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>,
+ <&gpio2 27 GPIO_ACTIVE_HIGH>;
+};
+
+/* SPI0 */
+&ecspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>,
+ <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ /* default boot source: workaround #1 for errata ERR006282 */
+ smarc_flash: spi-flash@0 {
+ compatible = "winbond,w25q16dw", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+/* GBE */
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+};
+
+&i2c_intern {
+ pmic@8 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ reg_v_core_s0: sw1ab {
+ regulator-name = "V_CORE_S0";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vddsoc_s0: sw1c {
+ regulator-name = "V_VDDSOC_S0";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p15v_s0: sw2 {
+ regulator-name = "V_3V15_S0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* sw3a/b is used in dual mode, but driver does not
+ * support it. Although, there's no need to control
+ * DDR power - so just leaving dummy entries for sw3a
+ * and sw3b for now.
+ */
+ sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_1p8v_s0: sw4 {
+ regulator-name = "V_1V8_S0";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* Regulator for USB */
+ reg_5p0v_s0: swbst {
+ regulator-name = "V_5V0_S0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ };
+
+ reg_vsnvs: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vrefddr: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /*
+ * Per schematics, of all VGEN's, only VGEN5 has some
+ * usage ... but even that - over DNI resistor
+ */
+ vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_2p5v_s0: vgen5 {
+ regulator-name = "V_2V5_S0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+};
+
+/* I2C_GP */
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+/* HDMI_CTRL */
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+/* I2C_PM */
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ smarc_eeprom: eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+
+ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
+ MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
+
+ /* AUDIO MCLK */
+ MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x000b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 /* CS0 */
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
+ >;
+ };
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+ /* SPI_IMX_CS2# - connected to internal flash */
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+ /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+ MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpio: gpiogrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 /* GPIO0 / CAM0_PWR# */
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b0 /* GPIO1 / CAM1_PWR# */
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b0 /* GPIO2 / CAM0_RST# */
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b0 /* GPIO3 / CAM1_RST# */
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b0 /* GPIO4 / HDA_RST# */
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b0 /* GPIO5 / PWM_OUT */
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b0 /* GPIO6 / TACHIN */
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 /* GPIO7 / PCAM_FLD */
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b0 /* GPIO9 / CAN1_ERR# */
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b0 /* GPIO11 */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */
+ >;
+ };
+
+ pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* SCL */
+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* SDA */
+ >;
+ };
+
+ pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */
+ >;
+ };
+
+ pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f1
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f1
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f1
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f1
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f1
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f1
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f1
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f1
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f1
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f1
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
+
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f1 /* DE */
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f1 /* HSYNC */
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f1 /* VSYNC */
+ >;
+ };
+
+ pinctrl_lcdbklt_en: lcdbkltengrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b1
+ >;
+ };
+
+ pinctrl_lcdvdd_en: lcdvddengrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+ >;
+ };
+
+ pinctrl_mipi_csi: mipi-csigrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x000b0 /* CSI0/1 MCLK */
+ >;
+ };
+
+ pinctrl_mgmt_gpios: mgmt-gpiosgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */
+ MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A# */
+ MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE# */
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0
+ /* power, oc muxed but not used by the driver */
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 /* USB power */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 /* USB OC */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+
+ pinctrl_wdog1: wdog1rp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+ >;
+ };
+};
+
+&mipi_csi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_csi>;
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+/* LCD_BKLT_PWM */
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+ vin-supply = <&reg_v_core_s0>;
+};
+
+&reg_pu {
+ vin-supply = <&reg_vddsoc_s0>;
+};
+
+&reg_soc {
+ vin-supply = <&reg_vddsoc_s0>;
+};
+
+/* SER0 */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ uart-has-rtscts;
+};
+
+/* SER1 */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+/* SER2 */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+};
+
+/* SER3 */
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+};
+
+/* USB0 */
+&usbotg {
+ /*
+ * no 'imx6-usb-charger-detection'
+ * since USB_OTG_CHD_B pin is not wired
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+/* USB1/2 via hub */
+&usbh1 {
+ vbus-supply = <&reg_5p0v_s0>;
+};
+
+/* SDIO */
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ no-1-8-v;
+};
+
+/* SDMMC */
+&usdhc4 {
+ /* Internal eMMC, optional on some boards */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ no-sdio;
+ no-sd;
+ non-removable;
+ vmmc-supply = <&reg_3p3v_s0>;
+ vqmmc-supply = <&reg_1p8v_s0>;
+};
+
+&wdog1 {
+ /* CPLD is feeded by watchdog (hardwired) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 185fb17a3500..71ca76a5e4a5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -745,10 +745,26 @@
vin-supply = <&sw1c_reg>;
};
+&reg_vdd1p1 {
+ vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd3p0 {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+ vin-supply = <&vgen5_reg>;
+};
+
&snvs_poweroff {
status = "okay";
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b3a77bcf00d5..4b801935cad1 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -675,14 +675,14 @@
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_DUMMY>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
};
wdog2: wdog@20c0000 {
compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6QDL_CLK_DUMMY>;
+ clocks = <&clks IMX6QDL_CLK_IPG>;
status = "disabled";
};
@@ -701,7 +701,7 @@
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1 {
+ reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@@ -716,7 +716,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -731,7 +731,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
@@ -841,6 +841,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index f7a48e4622e1..4829aa682aeb 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -580,6 +580,18 @@
status = "okay";
};
+&reg_vdd1p1 {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd3p0 {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+ vin-supply = <&sw2_reg>;
+};
+
&snvs_poweroff {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 9ddbeea64b72..b36fc012ff06 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -495,7 +495,7 @@
compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_DUMMY>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
status = "disabled";
};
@@ -503,14 +503,14 @@
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020bc000 0x4000>;
interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_DUMMY>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
};
wdog2: wdog@20c0000 {
compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
reg = <0x020c0000 0x4000>;
interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SL_CLK_DUMMY>;
+ clocks = <&clks IMX6SL_CLK_IPG>;
status = "disabled";
};
@@ -531,7 +531,7 @@
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1 {
+ reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@@ -546,7 +546,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -561,7 +561,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 4a31a415f88e..3e1d32fdf4b8 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -265,6 +265,18 @@
status = "okay";
};
+&reg_3p0 {
+ vin-supply = <&sw2_reg>;
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index 1b4899f0fcde..b0a77ff70b67 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -568,6 +568,7 @@
regmap = <&snvs>;
offset = <0x38>;
mask = <0x61>;
+ status = "disabled";
};
snvs_pwrkey: snvs-powerkey {
@@ -576,6 +577,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 00c485482301..f1830ed387a5 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -154,3 +154,19 @@
enable-active-high;
vin-supply = <&reg_can_en>;
};
+
+&reg_vdd1p1 {
+ vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd3p0 {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+ vin-supply = <&vgen6_reg>;
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 998e3e13a005..a8ee7087af5a 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -137,7 +137,23 @@
vin-supply = <&sw1a_reg>;
};
+&reg_vdd1p1 {
+ vin-supply = <&vgen6_reg>;
+};
+
+&reg_vdd3p0 {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+ vin-supply = <&vgen6_reg>;
+};
+
&reg_can_stby {
/* Transceiver EN/STBY is active low on RevB board */
gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
+
+&snvs_pwrkey {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
index db0feb9b9f5d..205ea26484e3 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
index 5c7a2bb9141c..5817b4985391 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -53,3 +16,11 @@
reg = <0x80000000 0x40000000>;
};
};
+
+&i2c4 { /* Onboard Motion sensors */
+ status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
index 13dfe2afaba5..96f4d89848a3 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -68,3 +31,11 @@
};
};
};
+
+&i2c4 { /* Onboard Motion sensors */
+ status = "okay";
+};
+
+&uart3 { /* Bluetooth */
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 53b3eac94f0d..25d4aa985a69 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016 Andreas Färber
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx6sx.dtsi"
@@ -107,18 +70,6 @@
startup-delay-us = <70000>;
enable-active-high;
};
-
- reg_bt: regulator-bt {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_bt_reg>;
- enable-active-high;
- gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
- regulator-name = "bt_reg";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
};
&fec1 {
@@ -225,6 +176,20 @@
};
};
+&i2c2 { /* Brick snap in sensors connector */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c4 { /* Onboard Motion sensors */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ clock-frequency = <100000>;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_bt_reg: btreggrp {
fsl,pins =
@@ -256,6 +221,18 @@
<MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>,
+ <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins =
+ <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>,
+ <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins =
<MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
@@ -354,11 +331,19 @@
status = "disabled";
};
-&uart3 { /* Bluetooth */
+&uart3 { /* Bluetooth - only on Extended/Full versions */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
uart-has-rtscts;
- status = "okay";
+ status = "disabled";
+
+ bluetooth {
+ compatible = "ti,wl1831-st";
+ enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt_reg>;
+ max-speed = <921600>;
+ };
};
/* Arduino serial */
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index b16a123990a2..bb25add90f19 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -600,7 +600,7 @@
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1 {
+ reg_vdd1p1: regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <1000000>;
@@ -615,7 +615,7 @@
anatop-enable-bit = <0>;
};
- regulator-3p0 {
+ reg_vdd3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
@@ -630,7 +630,7 @@
anatop-enable-bit = <0>;
};
- regulator-2p5 {
+ reg_vdd2p5: regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2250000>;
@@ -738,6 +738,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 9207d5d071f1..cbe61b61a212 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -238,6 +238,10 @@
status = "okay";
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index bc77f26a2f1d..21ddd359d3ed 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -169,7 +169,7 @@
display = <&display0>;
status = "okay";
- display0: display {
+ display0: display0 {
bits-per-pixel = <16>;
bus-width = <18>;
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index 213e802bf35c..b26d4f57c655 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -161,7 +161,7 @@
display = <&display0>;
status = "okay";
- display0: display {
+ display0: display0 {
bits-per-pixel = <16>;
bus-width = <18>;
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index a7f6d1d58e20..81d4b4925127 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -59,6 +59,7 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clock-frequency = <696000000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
operating-points = <
@@ -649,6 +650,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
snvs_lpgpr: snvs-lpgpr {
@@ -856,6 +858,8 @@
<&clks IMX6UL_CLK_USDHC1>,
<&clks IMX6UL_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
+ fsl,tuning-step= <2>;
+ fsl,tuning-start-tap = <20>;
bus-width = <4>;
status = "disabled";
};
@@ -869,6 +873,8 @@
<&clks IMX6UL_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
+ fsl,tuning-step= <2>;
+ fsl,tuning-start-tap = <20>;
status = "disabled";
};
@@ -962,6 +968,14 @@
status = "disabled";
};
+ pxp: pxp@21cc000 {
+ compatible = "fsl,imx6ul-pxp";
+ reg = <0x021cc000 0x4000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_PXP>;
+ clock-names = "axi";
+ };
+
qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index 006690ea98c0..b6147c76d159 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -145,13 +145,20 @@
};
&usdhc1 {
- pinctrl-names = "default";
+ pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
- no-1-8-v;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>;
+ pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
disable-wp;
wakeup-source;
keep-power-in-suspend;
vmmc-supply = <&reg_3v3>;
+ vqmmc-supply = <&reg_sd1_vmmc>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 9ad1da159768..d56728f03c35 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -545,6 +545,12 @@
>;
};
+ pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp {
+ fsl,pins = <
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0
+ >;
+ };
+
pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp {
fsl,pins = <
MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14
diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi
index 22e4a307fa59..b7e67d121322 100644
--- a/arch/arm/boot/dts/imx6ull.dtsi
+++ b/arch/arm/boot/dts/imx6ull.dtsi
@@ -12,6 +12,7 @@
/delete-node/ &crypto;
&cpu0 {
+ clock-frequency = <900000000>;
operating-points = <
/* kHz uV */
900000 1275000
@@ -34,6 +35,12 @@
compatible = "fsl,imx6ull-ocotp", "syscon";
};
+&pxp {
+ compatible = "fsl,imx6ull-pxp";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&usdhc1 {
compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
};
diff --git a/arch/arm/boot/dts/imx7d-meerkat96.dts b/arch/arm/boot/dts/imx7d-meerkat96.dts
new file mode 100644
index 000000000000..5339210b63d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-meerkat96.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include "imx7d.dtsi"
+
+/ {
+ model = "96Boards Meerkat96 Board";
+ compatible = "novtech,imx7d-meerkat96", "fsl,imx7d";
+
+ chosen {
+ stdout-path = &uart6;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512MB */
+ };
+
+ reg_wlreg_on: regulator-wlreg-on {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlreg_on>;
+ regulator-name = "wlreg_on";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100>;
+ gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led1 {
+ label = "green:user1";
+ gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green:user2";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "green:user3";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "green:user4";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+
+ led5 {
+ label = "yellow:wlan";
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ led6 {
+ label = "blue:bt";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ status = "okay";
+};
+
+&uart7 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>;
+ assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ vbus-supply = <&reg_usb_otg2_vbus>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ keep-power-in-suspend;
+ tuning-step = <2>;
+ vmmc-supply = <&reg_3p3v>;
+ no-1-8-v;
+ broken-cd;
+ status = "okay";
+};
+
+&usdhc3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ no-1-8-v;
+ no-mmc;
+ non-removable;
+ keep-power-in-suspend;
+ wakeup-source;
+ vmmc-supply = <&reg_wlreg_on>;
+ vqmmc-supply =<&reg_3p3v>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_irq>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ };
+};
+
+&iomuxc {
+ pinctrl_bt_gpios: btgpiosgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x59
+ MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x1f
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x59
+ MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59
+ MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
+ MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x4000007f
+ MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
+ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x79
+ MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x79
+ MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x79
+ MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x79
+ >;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x79
+ MX7D_PAD_SD1_WP__UART6_DCE_TX 0x79
+ >;
+ };
+
+ pinctrl_uart7: uart7grp {
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x79
+ MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x79
+ MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x79
+ MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x79
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
+ MX7D_PAD_SD3_CLK__SD3_CLK 0x0D
+ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
+ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
+ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
+ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
+ >;
+ };
+
+ pinctrl_wlan_irq: wlanirqgrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x19
+ >;
+ };
+
+ pinctrl_wlreg_on: wlregongrp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x19
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 202922ed3754..869efbc4af42 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -263,8 +263,8 @@
};
sw2_reg: sw2 {
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
@@ -379,6 +379,18 @@
status = "okay";
};
+&reg_1p0d {
+ vin-supply = <&sw2_reg>;
+};
+
+&reg_1p2 {
+ vin-supply = <&sw2_reg>;
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index 3e467a94e8a6..4a78ddc7513d 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -16,7 +16,7 @@
compatible = "zii,imx7d-rpu2", "fsl,imx7d";
chosen {
- stdout-path = &uart1;
+ stdout-path = &uart2;
};
cs2000_ref: oscillator {
@@ -775,13 +775,6 @@
>;
};
- pinctrl_i2c1_gpio: i2c1gpiogrp {
- fsl,pins = <
- MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f
- MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f
- >;
- };
-
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
@@ -789,13 +782,6 @@
>;
};
- pinctrl_i2c2_gpio: i2c2gpiogrp {
- fsl,pins = <
- MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f
- MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f
- >;
- };
-
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index f33b560821b8..42528d2812a2 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -12,6 +12,8 @@
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
cpu1: cpu@1 {
@@ -39,15 +41,23 @@
opp-792000000 {
opp-hz = /bits/ 64 <792000000>;
- opp-microvolt = <975000>;
+ opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
+ opp-supported-hw = <0xf>, <0xf>;
};
opp-996000000 {
opp-hz = /bits/ 64 <996000000>;
- opp-microvolt = <1075000>;
+ opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
- opp-suspend;
+ opp-supported-hw = <0xc>, <0xf>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1225000>;
+ clock-latency-ns = <150000>;
+ opp-supported-hw = <0x8>, <0xf>;
};
};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 106711d2c01b..c1a4fff5ceda 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -117,7 +117,7 @@
* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell"
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@@ -175,7 +175,7 @@
ranges;
funnel@30041000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30041000 0x1000>;
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
@@ -217,7 +217,7 @@
};
funnel@30083000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x30083000 0x1000>;
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
@@ -551,6 +551,10 @@
tempmon_temp_grade: temp-grade@10 {
reg = <0x10 0x4>;
};
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 0x4>;
+ };
};
anatop: anatop@30360000 {
@@ -609,6 +613,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/imx7ulp-evk.dts b/arch/arm/boot/dts/imx7ulp-evk.dts
index a09026a6d22e..4245b33bb451 100644
--- a/arch/arm/boot/dts/imx7ulp-evk.dts
+++ b/arch/arm/boot/dts/imx7ulp-evk.dts
@@ -22,6 +22,25 @@
reg = <0x60000000 0x40000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&tpm4 1 50000 0>;
+ brightness-levels = <0 20 25 30 35 40 100>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_vbus>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_vsd_3v3: regulator-vsd-3v3 {
compatible = "regulator-fixed";
regulator-name = "VSD_3V3";
@@ -40,6 +59,23 @@
status = "okay";
};
+&tpm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <&reg_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1_id>;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ over-current-active-low;
+ status = "okay";
+};
+
&usdhc0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc0>;
@@ -57,6 +93,25 @@
bias-pull-up;
};
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTF2__TPM4_CH1 0x2
+ >;
+ };
+
+ pinctrl_usbotg1_vbus: otg1vbusgrp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTC0__PTC0 0x20000
+ >;
+ };
+
+ pinctrl_usbotg1_id: otg1idgrp {
+ fsl,pins = <
+ IMX7ULP_PAD_PTC13__USB0_ID 0x10003
+ IMX7ULP_PAD_PTC16__USB1_OC2 0x10003
+ >;
+ };
+
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index e20483714be5..992747a57442 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -30,6 +30,7 @@
serial1 = &lpuart5;
serial2 = &lpuart6;
serial3 = &lpuart7;
+ usbphy0 = &usbphy1;
};
cpus {
@@ -147,6 +148,16 @@
status = "disabled";
};
+ tpm4: pwm@40250000 {
+ compatible = "fsl,imx7ulp-pwm";
+ reg = <0x40250000 0x1000>;
+ assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+ assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>;
+ clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
tpm5: tpm@40260000 {
compatible = "fsl,imx7ulp-tpm";
reg = <0x40260000 0x1000>;
@@ -156,6 +167,33 @@
clock-names = "ipg", "per";
};
+ usbotg1: usb@40330000 {
+ compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
+ reg = <0x40330000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc2 IMX7ULP_CLK_USB0>;
+ phys = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ ahb-burst-config = <0x0>;
+ tx-burst-size-dword = <0x8>;
+ rx-burst-size-dword = <0x8>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@40330200 {
+ compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc";
+ #index-cells = <1>;
+ reg = <0x40330200 0x200>;
+ };
+
+ usbphy1: usb-phy@0x40350000 {
+ compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy";
+ reg = <0x40350000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>;
+ #phy-cells = <0>;
+ };
+
usdhc0: mmc@40370000 {
compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc";
reg = <0x40370000 0x10000>;
diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi
index 1612a869a4f7..602f74d2c758 100644
--- a/arch/arm/boot/dts/integrator.dtsi
+++ b/arch/arm/boot/dts/integrator.dtsi
@@ -62,6 +62,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x24000000 0x02000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
fpga {
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index e2b1ab9b56e5..ae75a1db3d9a 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -87,7 +87,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
new file mode 100644
index 000000000000..07ac99b9cda6
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit-28.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+
+/*
+ * There are two types of 4.3" LCD, Type 15 and Type 28.
+ * By default, type 15 was used. This device tree file
+ * uses the timing for the type 28 LCD
+ */
+
+#include "logicpd-torpedo-37xx-devkit.dts"
+
+&lcd0 {
+
+ label = "28";
+
+ panel-timing {
+ clock-frequency = <9000000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <3>;
+ hback-porch = <2>;
+ hsync-len = <42>;
+ vback-porch = <3>;
+ vfront-porch = <2>;
+ vsync-len = <11>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+};
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
new file mode 100644
index 000000000000..5b7689094b70
--- /dev/null
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -0,0 +1,289 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2016-2018 NXP Semiconductors
+ * Copyright 2019 Vladimir Oltean <olteanv@gmail.com>
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "NXP LS1021A-TSN Board";
+
+ sys_mclk: clock-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ reg_vdda_codec: regulator-3V3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vddio_codec: regulator-2V5 {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ /* ADG704BRMZ 1:4 SPI mux/demux */
+ sja1105: ethernet-switch@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,sja1105t";
+ /* 12 MHz */
+ spi-max-frequency = <12000000>;
+ /* Sample data on trailing clock edge */
+ spi-cpha;
+ /* SPI controller settings for SJA1105 timing requirements */
+ fsl,spi-cs-sck-delay = <1000>;
+ fsl,spi-sck-cs-delay = <1000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ /* ETH5 written on chassis */
+ label = "swp5";
+ phy-handle = <&rgmii_phy6>;
+ phy-mode = "rgmii-id";
+ reg = <0>;
+ };
+
+ port@1 {
+ /* ETH2 written on chassis */
+ label = "swp2";
+ phy-handle = <&rgmii_phy3>;
+ phy-mode = "rgmii-id";
+ reg = <1>;
+ };
+
+ port@2 {
+ /* ETH3 written on chassis */
+ label = "swp3";
+ phy-handle = <&rgmii_phy4>;
+ phy-mode = "rgmii-id";
+ reg = <2>;
+ };
+
+ port@3 {
+ /* ETH4 written on chassis */
+ label = "swp4";
+ phy-handle = <&rgmii_phy5>;
+ phy-mode = "rgmii-id";
+ reg = <3>;
+ };
+
+ port@4 {
+ /* Internal port connected to eth2 */
+ ethernet = <&enet2>;
+ phy-mode = "rgmii";
+ reg = <4>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&enet0 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&sgmii_phy2>;
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+&enet1 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&sgmii_phy1>;
+ phy-mode = "sgmii";
+ status = "okay";
+};
+
+/* RGMII delays added via PCB traces */
+&enet2 {
+ phy-mode = "rgmii";
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&esdhc {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* 3 axis accelerometer */
+ accelerometer@1e {
+ compatible = "fsl,fxls8471";
+ position = <0>;
+ reg = <0x1e>;
+ };
+
+ /* Audio codec (SAI2) */
+ audio-codec@2a {
+ compatible = "fsl,sgtl5000";
+ VDDIO-supply = <&reg_vddio_codec>;
+ VDDA-supply = <&reg_vdda_codec>;
+ #sound-dai-cells = <0>;
+ clocks = <&sys_mclk>;
+ reg = <0x2a>;
+ };
+
+ /* Current sensing circuit for 1V VDDCORE PMIC rail */
+ current-sensor@44 {
+ compatible = "ti,ina220";
+ shunt-resistor = <1000>;
+ reg = <0x44>;
+ };
+
+ /* Current sensing circuit for 12V VCC rail */
+ current-sensor@45 {
+ compatible = "ti,ina220";
+ shunt-resistor = <1000>;
+ reg = <0x45>;
+ };
+
+ /* Thermal monitor - case */
+ temperature-sensor@48 {
+ compatible = "national,lm75";
+ reg = <0x48>;
+ };
+
+ /* Thermal monitor - chip */
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+
+ /* Unsupported devices:
+ * - FXAS21002C Gyroscope at 0x20
+ * - TI ADS7924 4-channel ADC at 0x49
+ */
+};
+
+&ifc {
+ status = "disabled";
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&lpuart3 {
+ status = "okay";
+};
+
+&mdio0 {
+ /* AR8031 */
+ sgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+
+ /* AR8031 */
+ sgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+
+ /* BCM5464 quad PHY */
+ rgmii_phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+
+ rgmii_phy4: ethernet-phy@4 {
+ reg = <0x4>;
+ };
+
+ rgmii_phy5: ethernet-phy@5 {
+ reg = <0x5>;
+ };
+
+ rgmii_phy6: ethernet-phy@6 {
+ reg = <0x6>;
+ };
+
+ /* SGMII PCS for enet0 */
+ tbi0: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&mdio1 {
+ /* SGMII PCS for enet1 */
+ tbi1: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&qspi {
+ status = "okay";
+
+ flash@0 {
+ /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
+ compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RCW";
+ reg = <0x0 0x40000>;
+ };
+
+ partition@40000 {
+ label = "U-Boot";
+ reg = <0x40000 0x300000>;
+ };
+
+ partition@340000 {
+ label = "U-Boot Env";
+ reg = <0x340000 0x100000>;
+ };
+ };
+ };
+};
+
+&sai2 {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 8841783aceec..c4447f6c8b2c 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/meson6-atv1200.dts b/arch/arm/boot/dts/meson6-atv1200.dts
index 997e69c5963e..98e1c94c0261 100644
--- a/arch/arm/boot/dts/meson6-atv1200.dts
+++ b/arch/arm/boot/dts/meson6-atv1200.dts
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
index 65585255910a..2d31b7ce3f8c 100644
--- a/arch/arm/boot/dts/meson6.dtsi
+++ b/arch/arm/boot/dts/meson6.dtsi
@@ -1,48 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson.dtsi"
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 8686abd5de7f..61ec929ab86e 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -1,43 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2014 Beniamino Galvani <b.galvani@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 40c11b6b217a..5a7e3e5caebe 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -1,46 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/meson8b-clkc.h>
@@ -228,6 +188,28 @@
};
};
+ mmcbus: bus@c8000000 {
+ compatible = "simple-bus";
+ reg = <0xc8000000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc8000000 0x8000>;
+
+ dmcbus: bus@6000 {
+ compatible = "simple-bus";
+ reg = <0x6000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x400>;
+
+ canvas: video-lut@20 {
+ compatible = "amlogic,meson8-canvas",
+ "amlogic,canvas";
+ reg = <0x20 0x14>;
+ };
+ };
+ };
+
apb: bus@d0000000 {
compatible = "simple-bus";
reg = <0xd0000000 0x200000>;
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 9bf4249cb60d..96d239d8334e 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -234,10 +234,6 @@
phy-handle = <&eth_phy0>;
phy-mode = "rmii";
- snps,reset-gpio = <&gpio GPIOH_4 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -246,6 +242,11 @@
eth_phy0: ethernet-phy@0 {
/* IC Plus IP101A/G (0x02430c54) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
icplus,select-interrupt;
interrupt-parent = <&gpio_intc>;
/* GPIOH_3 */
diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts
index 08ddd7fb0bf8..bb27b34eb346 100644
--- a/arch/arm/boot/dts/meson8b-mxq.dts
+++ b/arch/arm/boot/dts/meson8b-mxq.dts
@@ -1,50 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
#include "meson8b.dtsi"
/ {
@@ -63,6 +26,127 @@
device_type = "memory";
reg = <0x40000000 0x40000000>;
};
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&saradc 8>;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwms = <&pwm_cd 0 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&vcc_5v>;
+ };
+
+ vcc_5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+&ethmac {
+ status = "okay";
+
+ pinctrl-0 = <&eth_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <&eth_phy0>;
+ phy-mode = "rmii";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101A/G (0x02430c54) */
+ reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
+ icplus,select-interrupt;
+ interrupt-parent = <&gpio_intc>;
+ /* GPIOH_3 */
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vcc_3v3>;
+ };
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
};
&uart_AO {
@@ -70,3 +154,19 @@
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index f3ad9397f670..86c4614e0a38 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -1,47 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
@@ -216,10 +176,6 @@
&ethmac {
status = "okay";
- snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 30000>;
-
pinctrl-0 = <&eth_rgmii_pins>;
pinctrl-names = "default";
@@ -235,6 +191,11 @@
/* Realtek RTL8211F (0x001cc916) */
eth_phy: ethernet-phy@0 {
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
/* GPIOH_3 */
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index ec67f49116d9..fba2c70c2fda 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -1,47 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2015 Endless Mobile, Inc.
* Author: Carlo Caione <carlo@endlessm.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/clock/meson8b-clkc.h>
@@ -205,6 +165,28 @@
};
};
+ mmcbus: bus@c8000000 {
+ compatible = "simple-bus";
+ reg = <0xc8000000 0x8000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xc8000000 0x8000>;
+
+ dmcbus: bus@6000 {
+ compatible = "simple-bus";
+ reg = <0x6000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x6000 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,meson8b-canvas",
+ "amlogic,canvas";
+ reg = <0x48 0x14>;
+ };
+ };
+ };
+
apb: bus@d0000000 {
compatible = "simple-bus";
reg = <0xd0000000 0x200000>;
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index 29d830ae4bf4..d54477b1001c 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -73,10 +73,6 @@
amlogic,tx-delay-ns = <4>;
- snps,reset-gpio = <&gpio GPIOH_4 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -85,6 +81,10 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
};
};
};
@@ -114,8 +114,9 @@
regulator-always-on;
};
- DCDC2 {
- regulator-name = "VDDAO";
+ vddee: DCDC2 {
+ /* the output is also used as VDDAO */
+ regulator-name = "VDD_EE";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
@@ -189,6 +190,10 @@
};
};
+&mali {
+ mali-supply = <&vddee>;
+};
+
&saradc {
status = "okay";
vref-supply = <&vddio_ao1v8>;
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
index bb87b251e16d..5bde7f502007 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -14,6 +14,16 @@
compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc";
};
+&dmcbus {
+ /* the offset of the canvas registers has changed compared to Meson8 */
+ /delete-node/ video-lut@20;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,meson8m2-canvas", "amlogic,canvas";
+ reg = <0x48 0x14>;
+ };
+};
+
&ethmac {
compatible = "amlogic,meson8m2-dwmac", "snps,dwmac";
reg = <0xc9410000 0x10000
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index 5059ecac4478..bea05dc4ef0f 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -1371,7 +1371,6 @@
target-module@20000 { /* 0x48020000, ap 3 06.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "uart3";
reg = <0x20050 0x4>,
<0x20054 0x4>,
<0x20058 0x4>;
@@ -1728,7 +1727,6 @@
target-module@6a000 { /* 0x4806a000, ap 26 18.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "uart1";
reg = <0x6a050 0x4>,
<0x6a054 0x4>,
<0x6a058 0x4>;
@@ -1758,7 +1756,6 @@
target-module@6c000 { /* 0x4806c000, ap 28 20.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "uart2";
reg = <0x6c050 0x4>,
<0x6c054 0x4>,
<0x6c058 0x4>;
@@ -1788,7 +1785,6 @@
target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "uart4";
reg = <0x6e050 0x4>,
<0x6e054 0x4>,
<0x6e058 0x4>;
@@ -2107,7 +2103,6 @@
target-module@9c000 { /* 0x4809c000, ap 53 36.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mmc1";
reg = <0x9c000 0x4>,
<0x9c010 0x4>;
reg-names = "rev", "sysc";
@@ -2175,7 +2170,6 @@
target-module@ad000 { /* 0x480ad000, ap 63 50.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mmc3";
reg = <0xad000 0x4>,
<0xad010 0x4>;
reg-names = "rev", "sysc";
@@ -2241,7 +2235,6 @@
target-module@b4000 { /* 0x480b4000, ap 67 46.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mmc2";
reg = <0xb4000 0x4>,
<0xb4010 0x4>;
reg-names = "rev", "sysc";
@@ -2336,7 +2329,6 @@
target-module@d1000 { /* 0x480d1000, ap 73 44.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mmc4";
reg = <0xd1000 0x4>,
<0xd1010 0x4>;
reg-names = "rev", "sysc";
@@ -2369,7 +2361,6 @@
target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "mmc5";
reg = <0xd5000 0x4>,
<0xd5010 0x4>;
reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
index 8ac24e3c8513..8a6721d436bd 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
+++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi
@@ -319,9 +319,9 @@
gpio_keys_pins: gpio-keys-pins {
pinctrl-single,pins = <
- MFP_PIN_PXA300(14) MFP_AF0 /* SCK */
- MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */
- MFP_PIN_PXA300(119) MFP_AF0 /* MISO */
+ MFP_PIN_PXA300(14) MFP_AF0 /* on-off */
+ MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */
+ MFP_PIN_PXA300(119) MFP_AF0 /* setup */
>;
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
};
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
index 65d825091f0d..12b15945ac6d 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
+++ b/arch/arm/boot/dts/pxa300-raumfeld-controller.dts
@@ -41,6 +41,8 @@
};
charger: charger {
+ pinctrl-names = "default";
+ pinctrl-0 = <&charger_pins>;
compatible = "gpio-charger";
charger-type = "mains";
gpios = <&gpio 101 GPIO_ACTIVE_LOW>;
@@ -109,9 +111,10 @@
};
&keys {
+ pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>;
dock-detect {
label = "dock detect";
- gpios = <&gpio 116 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio 116 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F5>;
};
};
@@ -236,6 +239,22 @@
pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT);
};
+ charger_pins: charger_pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(31) MFP_AF0 /* PEN2 */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,bias-pullup = MPF_PULL_UP;
+ };
+
+ dock_detect_pins: dock_detect_pins {
+ pinctrl-single,pins = <
+ MFP_PIN_PXA300(116) MFP_AF0 /* DOCK_DETECT */
+ >;
+ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH);
+ pinctrl-single,bias-pullup = MPF_PULL_UP;
+ };
+
lcdc_pins: lcdc-pins {
pinctrl-single,pins = <
MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
index 5f9e37585a28..a70560a8ea92 100644
--- a/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
+++ b/arch/arm/boot/dts/pxa300-raumfeld-speaker-one.dts
@@ -116,6 +116,9 @@
st,invalid-input-detect-mute;
/* 2 (half-bridge) and 1 (full-bridge) on-board power */
st,output-conf = /bits/ 8 <0x1>;
+ st,ch1-output-mapping = /bits/ 8 <0>;
+ st,ch2-output-mapping = /bits/ 8 <1>;
+ st,ch3-output-mapping = /bits/ 8 <2>;
st,needs_esd_watchdog;
};
};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index e1e607f53ce6..c237a0e4b12a 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -71,6 +71,14 @@
#define MFP_DS13X < (0x7 << 10) MFP_DSMSK >
/*
+ * MFP bias pull mode for pins.
+ * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP;
+ */
+#define MPF_PULL_MSK (0x7 << 13)
+#define MPF_PULL_DOWN < (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK >
+#define MPF_PULL_UP < (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK >
+
+/*
* MFP low power mode for pins.
* Example of use:
* pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL);
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 65975df6a8c3..8b79b4112ee1 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1603,7 +1603,7 @@
};
replicator {
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
@@ -1636,7 +1636,7 @@
};
funnel@1a04000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x1a04000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
index 643c57f84818..bf402ae39226 100644
--- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts
@@ -50,6 +50,12 @@
};
};
+ vibrator {
+ compatible = "gpio-vibrator";
+ enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&pm8941_l18>;
+ };
+
smd {
rpm {
rpm_requests {
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index b3b04736a159..3487daf98e81 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -280,6 +280,16 @@
};
};
+ i2c2_pins: i2c2 {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c3_pins: i2c3 {
mux {
pins = "gpio10", "gpio11";
@@ -289,6 +299,16 @@
};
};
+ i2c11_pins: i2c11 {
+ mux {
+ pins = "gpio83", "gpio84";
+ function = "blsp_i2c11";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
i2c12_pins: i2c12 {
mux {
pins = "gpio87", "gpio88";
@@ -306,6 +326,35 @@
input-enable;
};
};
+
+ touch_pin: touch {
+ int {
+ pins = "gpio5";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ reset {
+ pins = "gpio8";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ panel_pin: panel {
+ te {
+ pins = "gpio12";
+ function = "mdp_vsync";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
};
sdhci@f9824900 {
@@ -369,6 +418,30 @@
};
};
+ i2c@f9967000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c11_pins>;
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ led-controller@38 {
+ compatible = "ti,lm3630a";
+ status = "ok";
+ reg = <0x38>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <200>;
+ };
+ };
+ };
+
i2c@f9968000 {
status = "ok";
pinctrl-names = "default";
@@ -424,6 +497,41 @@
};
};
+ i2c@f9924000 {
+ status = "ok";
+
+ clock-frequency = <355000>;
+ qcom,src-freq = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ synaptics@70 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x70>;
+
+ interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l22>;
+ vio-supply = <&pm8941_lvs3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+ };
+
i2c@f9925000 {
status = "ok";
pinctrl-names = "default";
@@ -466,6 +574,54 @@
};
};
};
+
+ mdss@fd900000 {
+ status = "ok";
+
+ mdp@fd900000 {
+ status = "ok";
+ };
+
+ dsi@fd922800 {
+ status = "ok";
+
+ vdda-supply = <&pm8941_l2>;
+ vdd-supply = <&pm8941_lvs3>;
+ vddio-supply = <&pm8941_l12>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "lg,acx467akm-7";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+ };
+ };
+
+ dsi-phy@fd922a00 {
+ status = "ok";
+
+ vddio-supply = <&pm8941_l12>;
+ };
+ };
};
&spmi_bus {
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 45b5c8ef0374..369e58f64145 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
+#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
@@ -897,7 +898,7 @@
};
funnel@fc31b000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc31b000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
@@ -931,7 +932,7 @@
};
funnel@fc31a000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc31a000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
@@ -969,7 +970,7 @@
};
funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0xfc345000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
@@ -1085,6 +1086,137 @@
};
};
};
+
+ mdss: mdss@fd900000 {
+ status = "disabled";
+
+ compatible = "qcom,mdss";
+ reg = <0xfd900000 0x100>,
+ <0xfd924000 0x1000>;
+ reg-names = "mdss_phys",
+ "vbif_phys";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "vsync";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@fd900000 {
+ status = "disabled";
+
+ compatible = "qcom,mdp5";
+ reg = <0xfd900100 0x22000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "vsync";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi0: dsi@fd922800 {
+ status = "disabled";
+
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0xfd922800 0x1f8>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+
+ assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
+ <&mmcc PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&dsi_phy0 0>,
+ <&dsi_phy0 1>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_ESC0_CLK>,
+ <&mmcc MMSS_MISC_AHB_CLK>;
+ clock-names = "mdp_core",
+ "iface",
+ "bus",
+ "byte",
+ "pixel",
+ "core",
+ "core_mmss";
+
+ phys = <&dsi_phy0>;
+ phy-names = "dsi-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&mdp5_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ dsi_phy0: dsi-phy@fd922a00 {
+ status = "disabled";
+
+ compatible = "qcom,dsi-phy-28nm-hpm";
+ reg = <0xfd922a00 0xd4>,
+ <0xfd922b00 0x280>,
+ <0xfd922d80 0x30>;
+ reg-names = "dsi_pll",
+ "dsi_phy",
+ "dsi_phy_regulator";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+ qcom,dsi-phy-index = <0>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>;
+ clock-names = "iface";
+ };
+ };
};
smd {
diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 474baa0c7cfc..07d611d2b7b5 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index ff24301dc1be..99acfe4fe11a 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r7s72100.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
/ {
@@ -28,6 +29,37 @@
reg = <0x08000000 0x02000000>;
};
+ keyboard {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&keyboard_pins>;
+
+ key-1 {
+ interrupt-parent = <&irqc>;
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_1>;
+ label = "SW1";
+ wakeup-source;
+ };
+
+ key-2 {
+ interrupt-parent = <&irqc>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_2>;
+ label = "SW2";
+ wakeup-source;
+ };
+
+ key-3 {
+ interrupt-parent = <&irqc>;
+ interrupts = <5 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_3>;
+ label = "SW3";
+ wakeup-source;
+ };
+ };
+
lbsc {
#address-cells = <1>;
#size-cells = <1>;
@@ -101,6 +133,12 @@
<RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */
};
+ keyboard_pins: keyboard {
+ pinmux = <RZA1_PINMUX(1, 9, 3)>, /* IRQ3 */
+ <RZA1_PINMUX(1, 8, 3)>, /* IRQ2 */
+ <RZA1_PINMUX(1, 11, 3)>; /* IRQ5 */
+ };
+
/* Serial Console */
scif2_pins: serial2 {
pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 2211f88ede2a..d03dcd919d6f 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -670,6 +670,25 @@
status = "disabled";
};
+ irqc: interrupt-controller@fcfef800 {
+ compatible = "renesas,r7s72100-irqc",
+ "renesas,rza1-irqc";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xfcfef800 0x6>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <7 0>;
+ };
+
mtu2: timer@fcff0000 {
compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
index 991e09de1219..d062d02865e7 100644
--- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
+++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
@@ -9,6 +9,7 @@
/dts-v1/;
#include "r7s9210.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
/ {
@@ -17,6 +18,8 @@
aliases {
serial0 = &scif4;
+ ethernet0 = &ether0;
+ ethernet1 = &ether1;
};
chosen {
@@ -24,9 +27,19 @@
stdout-path = "serial0:115200n8";
};
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x00800000>; /* HyperRAM */
+ keyboard {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&keyboard_pins>;
+
+ key-3 {
+ interrupt-parent = <&irqc>;
+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_3>;
+ label = "SW3";
+ wakeup-source;
+ };
};
lbsc {
@@ -44,6 +57,41 @@
gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>;
};
};
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x00800000>; /* HyperRAM */
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ether0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth0_pins>;
+ status = "okay";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&ether1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&eth1_pins>;
+ status = "okay";
+ renesas,no-ether-link;
+ phy-handle = <&phy1>;
+ phy1: ethernet-phy@1 {
+ reg = <0>;
+ };
};
/* EXTAL */
@@ -51,26 +99,80 @@
clock-frequency = <24000000>; /* 24MHz */
};
-/* RTC_X1 */
-&rtc_x1_clk {
- clock-frequency = <32768>;
+/* High resolution System tick timers */
+&ostm0 {
+ status = "okay";
+};
+
+&ostm1 {
+ status = "okay";
};
&pinctrl {
+ eth0_pins: eth0 {
+ pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */
+ <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */
+ <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */
+ <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */
+ <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */
+ <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */
+ <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */
+ <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */
+ <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */
+ <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */
+ <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */
+ };
+
+ eth1_pins: eth1 {
+ pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */
+ <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */
+ <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */
+ <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */
+ <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */
+ <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */
+ <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */
+ <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */
+ <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */
+ <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */
+ <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
+ };
+
+ keyboard_pins: keyboard {
+ pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */
+ };
+
/* Serial Console */
scif4_pins: serial4 {
pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */
<RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */
};
-};
-/* High resolution System tick timers */
-&ostm0 {
- status = "okay";
+ sdhi0_pins: sdhi0 {
+ pinmux = <RZA2_PINMUX(PORT5, 0, 3)>, /* SD0_CD */
+ <RZA2_PINMUX(PORT5, 1, 3)>; /* SD0_WP */
+ };
+
+ sdhi1_pins: sdhi1 {
+ pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */
+ <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */
+ };
+
+ usb0_pins: usb0 {
+ pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */
+ <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */
+ <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */
+ };
+
+ usb1_pins: usb1 {
+ pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */
+ <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */
+ <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */
+ };
};
-&ostm1 {
- status = "okay";
+/* RTC_X1 */
+&rtc_x1_clk {
+ clock-frequency = <32768>;
};
/* Serial Console */
@@ -80,3 +182,38 @@
status = "okay";
};
+
+&sdhi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi0_pins>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&sdhi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhi1_pins>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+/* USB-0 as Host */
+&usb2_phy0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins>;
+ dr_mode = "host"; /* Requires JP3 to be fitted */
+ status = "okay";
+};
+
+/* USB-1 as Host */
+&usb2_phy1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+ dr_mode = "host";
+ status = "okay";
+};
+
+/* USB_X1 */
+&usb_x1_clk {
+ clock-frequency = <48000000>;
+};
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index 22baa96f5974..72b79770e336 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -30,6 +30,13 @@
clock-frequency = <0>;
};
+ usb_x1_clk: usb_x1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ /* If clk present, value (48000000) must be set by board */
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -146,6 +153,152 @@
status = "disabled";
};
+ spi0: spi@e800c800 {
+ compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
+ reg = <0xe800c800 0x24>;
+ interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD 97>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@e800d000 {
+ compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
+ reg = <0xe800d000 0x24>;
+ interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD 96>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@e800d800 {
+ compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz";
+ reg = <0xe800d800 0x24>;
+ interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error", "rx", "tx";
+ clocks = <&cpg CPG_MOD 95>;
+ power-domains = <&cpg>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ether0: ethernet@e8204000 {
+ compatible = "renesas,ether-r7s9210";
+ reg = <0xe8204000 0x200>;
+ interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 65>;
+ power-domains = <&cpg>;
+
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ether1: ethernet@e8204200 {
+ compatible = "renesas,ether-r7s9210";
+ reg = <0xe8204200 0x200>;
+ interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 64>;
+ power-domains = <&cpg>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@e803a000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+ reg = <0xe803a000 0x44>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 87>;
+ power-domains = <&cpg>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e803a400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+ reg = <0xe803a400 0x44>;
+ interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 86>;
+ power-domains = <&cpg>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e803a800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+ reg = <0xe803a800 0x44>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 85>;
+ power-domains = <&cpg>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e803ac00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s9210", "renesas,riic-rz";
+ reg = <0xe803ac00 0x44>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 84>;
+ power-domains = <&cpg>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
ostm0: timer@e803b000 {
compatible = "renesas,r7s9210-ostm", "renesas,ostm";
reg = <0xe803b000 0x30>;
@@ -176,6 +329,120 @@
status = "disabled";
};
+ ohci0: usb@e8218000 {
+ compatible = "generic-ohci";
+ reg = <0xe8218000 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 61>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci0: usb@e8218100 {
+ compatible = "generic-ehci";
+ reg = <0xe8218100 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 61>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@e8218200 {
+ compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy";
+ reg = <0xe8218200 0x700>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>;
+ clock-names = "fck", "usb_x1";
+ power-domains = <&cpg>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usbhs0: usb@e8219000 {
+ compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs";
+ reg = <0xe8219000 0x724>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 61>;
+ renesas,buswait = <7>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ohci1: usb@e821a000 {
+ compatible = "generic-ohci";
+ reg = <0xe821a000 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 60>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ ehci1: usb@e821a100 {
+ compatible = "generic-ehci";
+ reg = <0xe821a100 0x100>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 60>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@e821a200 {
+ compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy";
+ reg = <0xe821a200 0x700>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>;
+ clock-names = "fck", "usb_x1";
+ power-domains = <&cpg>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usbhs1: usb@e821b000 {
+ compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs";
+ reg = <0xe821b000 0x724>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 60>;
+ renesas,buswait = <7>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&cpg>;
+ status = "disabled";
+ };
+
+ sdhi0: sd@e8228000 {
+ compatible = "renesas,sdhi-r7s9210";
+ reg = <0xe8228000 0x8c0>;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>;
+ clock-names = "core", "cd";
+ power-domains = <&cpg>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
+ sdhi1: sd@e822a000 {
+ compatible = "renesas,sdhi-r7s9210";
+ reg = <0xe822a000 0x8c0>;
+ interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>;
+ clock-names = "core", "cd";
+ power-domains = <&cpg>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ status = "disabled";
+ };
+
gic: interrupt-controller@e8221000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
@@ -206,6 +473,25 @@
reg = <0xfcfe8004 4>;
};
+ irqc: interrupt-controller@fcfef800 {
+ compatible = "renesas,r7s9210-irqc",
+ "renesas,rza1-irqc";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xfcfef800 0x6>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <7 0>;
+ };
+
pinctrl: pin-controller@fcffe000 {
compatible = "renesas,r7s9210-pinctrl";
reg = <0xfcffe000 0x1000>;
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index f70f4a3e5c43..a5351ddbf506 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 32757caa2584..758360a2edc3 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index ca0e0fc9b246..807e7d0d6b62 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -17,7 +17,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
index 1db220cfc1a1..ce6603b0994b 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
@@ -42,7 +42,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial3:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index 655b10bb42d5..db72a801abe5 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -17,7 +17,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 2840eb0d6fd4..450efe923008 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -18,7 +18,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial1:115200n8";
};
@@ -63,7 +63,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1
1800000 0>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 0b49956069fc..6c7b07c4b9d3 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -25,7 +25,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index d4bee1ec9044..c755f0b8fd0d 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 7b9508e83d46..83cc619861b2 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -56,7 +56,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -423,6 +423,8 @@
*/
i2cpwr: i2c-13 {
compatible = "i2c-demux-pinctrl";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
i2c-parent = <&iic3>, <&i2c3>;
i2c-bus-name = "i2c-pwr";
#address-cells = <1>;
@@ -615,6 +617,11 @@
function = "iic3";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
hsusb_pins: hsusb {
groups = "usb0_ovc_vbus";
function = "usb0";
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 7a7d3b84d1a6..a315ba749aa4 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -179,6 +179,11 @@
function = "iic3";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -317,7 +322,7 @@
&iic3 {
pinctrl-names = "default";
- pinctrl-0 = <&iic3_pins>;
+ pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
status = "okay";
pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index e6580aa0cea3..af6bd8fcd5a4 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -56,7 +56,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -540,6 +540,11 @@
function = "intc";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -776,6 +781,8 @@
};
&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fefdf8238bbe..d6cf16aac14d 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -31,7 +31,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -228,6 +228,11 @@
function = "intc";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -373,6 +378,8 @@
};
&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index b6fa80c3b07e..248eb717eb35 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -21,7 +21,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -234,6 +234,11 @@
groups = "du1_rgb666", "du1_sync", "du1_disp";
function = "du1";
};
+
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
};
&rwdt {
@@ -314,6 +319,8 @@
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
interrupt-parent = <&irqc>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts
index f46f4567b3d4..bd2a63bdab3d 100644
--- a/arch/arm/boot/dts/r8a7792-wheat.dts
+++ b/arch/arm/boot/dts/r8a7792-wheat.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 38fb43d11b27..c4ea2d676030 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -875,6 +875,40 @@
compatible = "renesas,prr";
reg = <0 0xff000044 0 4>;
};
+
+ cmt0: timer@ffca0000 {
+ compatible = "renesas,r8a7792-cmt0",
+ "renesas,rcar-gen2-cmt0";
+ reg = <0 0xffca0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a7792-cmt1",
+ "renesas,rcar-gen2-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 329>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 329>;
+
+ status = "disabled";
+ };
};
timer {
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f51601af89a2..42f3313e6988 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -52,7 +52,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -514,6 +514,11 @@
function = "intc";
};
+ pmic_irq_pins: pmicirq {
+ groups = "intc_irq2";
+ function = "intc";
+ };
+
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
@@ -711,6 +716,8 @@
};
&i2c6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq_pins>;
status = "okay";
clock-frequency = <100000>;
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 0ab3d8d57f6d..1d22fcdc5d22 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -22,7 +22,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index 60e91ebfa65d..b3177aea45d1 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -34,7 +34,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index da102fff96a2..340ed6ccb08f 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -143,6 +143,11 @@
#clock-cells = <0>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
i2s1: i2s1@100b0000 {
compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
reg = <0x100b0000 0x4000>;
@@ -529,6 +534,17 @@
status = "disabled";
};
+ hdmi_phy: hdmi-phy@12030000 {
+ compatible = "rockchip,rk3228-hdmi-phy";
+ reg = <0x12030000 0x10000>;
+ clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ #clock-cells = <0>;
+ clock-output-names = "hdmiphy_phy";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
gpu: gpu@20000000 {
compatible = "rockchip,rk3228-mali", "arm,mali-400";
reg = <0x20000000 0x10000>;
@@ -572,6 +588,28 @@
status = "disabled";
};
+ vop: vop@20050000 {
+ compatible = "rockchip,rk3228-vop";
+ reg = <0x20050000 0x1ffc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu@20053f00 {
compatible = "rockchip,iommu";
reg = <0x20053f00 0x100>;
@@ -579,7 +617,7 @@
interrupt-names = "vop_mmu";
clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>;
clock-names = "aclk", "iface";
- iommu-cells = <0>;
+ #iommu-cells = <0>;
status = "disabled";
};
@@ -594,6 +632,36 @@
status = "disabled";
};
+ hdmi: hdmi@200a0000 {
+ compatible = "rockchip,rk3228-dw-hdmi";
+ reg = <0x200a0000 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ assigned-clocks = <&cru SCLK_HDMI_PHY>;
+ assigned-clock-parents = <&hdmi_phy>;
+ clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
+ clock-names = "isfr", "iahb", "cec";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
+ resets = <&cru SRST_HDMI_P>;
+ reset-names = "hdmi";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vop: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
sdmmc: dwmmc@30000000 {
compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x30000000 0x4000>;
@@ -922,6 +990,21 @@
};
};
+ hdmi {
+ hdmi_hpd: hdmi-hpd {
+ rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>;
+ };
+
+ hdmii2c_xfer: hdmii2c-xfer {
+ rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>,
+ <0 RK_PA7 2 &pcfg_pull_none>;
+ };
+
+ hdmi_cec: hdmi-cec {
+ rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
index fbef34578100..1cadb522fd0d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
@@ -70,6 +70,21 @@
pinctrl-0 = <&ac_present_ap>;
};
+ lid_switch: lid-switch {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_lid_int_l>;
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <SW_LID>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <1>;
+ };
+ };
+
panel: panel {
compatible ="innolux,n116bge", "simple-panel";
status = "okay";
@@ -149,18 +164,6 @@
status = "okay";
};
-&gpio_keys {
- pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
- lid {
- label = "Lid";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- wakeup-source;
- linux,code = <0>; /* SW_LID */
- linux,input-type = <5>; /* EV_SW */
- debounce-interval = <1>;
- };
-};
-
&pwm0 {
status = "okay";
};
@@ -234,6 +237,7 @@
/* Wake only */
&suspend_l_wake
+ &bt_dev_wake_awake
>;
pinctrl-1 = <
/* Common for sleep and wake, but no owners */
@@ -243,6 +247,7 @@
/* Sleep only */
&suspend_l_sleep
+ &bt_dev_wake_sleep
>;
backlight {
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index e248f55ee8d2..fcd119168cb6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -135,6 +135,213 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "AP_LID_INT_L",
+ "EC_IN_RW",
+
+ "AC_PRESENT_AP",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OTP_OUT",
+ "HOST1_PWR_EN",
+ "USBOTG_PWREN_H",
+ "AP_WARM_RESET_H",
+ "nFALUT2",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "SUSPEND_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS",
+ "UART0_RTS",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE", /* Maybe missing from mighty? */
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "SPI0_CLK",
+ "SPI0_CS0",
+ "SPI0_TXD",
+ "SPI0_RXD",
+
+ "",
+ "",
+ "",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "ALS_INT",
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "SDMMC_D0",
+ "SDMMC_D1",
+ "SDMMC_D2",
+ "SDMMC_D3",
+ "SDMMC_CLK",
+ "SDMMC_CMD";
+};
+
+&gpio7 {
+ gpio-line-names = "LCDC_BL",
+ "PWM_LOG",
+ "BL_EN",
+ "TRACKPAD_INT",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "EC_INT",
+
+ "CPU_NMI",
+ "DVSOK",
+ "SDMMC_WP", /* mighty only */
+ "EDP_HPD",
+ "DVS1",
+ "nFALUT1", /* nFAULT1 on jaq */
+ "LCD_EN",
+ "DVS2",
+
+ "VCC5V_GOOD_H",
+ "I2C4_SDA_TP",
+ "I2C4_SCL_TP",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index b1613af83d5d..164561f04c1d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -103,6 +103,213 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "AP_LID_INT_L",
+ "EC_IN_RW",
+
+ "AC_PRESENT_AP",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OTP_OUT",
+ "HOST1_PWR_EN",
+ "USBOTG_PWREN_H",
+ "AP_WARM_RESET_H",
+ "nFAULT2",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "SUSPEND_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS",
+ "UART0_RTS",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "SPI0_CLK",
+ "SPI0_CS0",
+ "SPI0_TXD",
+ "SPI0_RXD",
+
+ "",
+ "",
+ "",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "",
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "SDMMC_D0",
+ "SDMMC_D1",
+ "SDMMC_D2",
+ "SDMMC_D3",
+ "SDMMC_CLK",
+ "SDMMC_CMD";
+};
+
+&gpio7 {
+ gpio-line-names = "LCDC_BL",
+ "PWM_LOG",
+ "BL_EN",
+ "TRACKPAD_INT",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "EC_INT",
+
+ "CPU_NMI",
+ "DVSOK",
+ "",
+ "EDP_HPD",
+ "DVS1",
+ "nFAULT1",
+ "LCD_EN",
+ "DVS2",
+
+ "VCC5V_GOOD_H",
+ "I2C4_SDA_TP",
+ "I2C4_SCL_TP",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-mickey.dts b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
index e852594417b5..aa352d40c991 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mickey.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mickey.dts
@@ -75,9 +75,7 @@
cooling-maps {
/*
* After 1st level, throttle the CPU down to as low as 1.4 GHz
- * and don't let the GPU go faster than 400 MHz. Note that we
- * won't throttle the GPU lower than 400 MHz due to CPU
- * heat--we'll let the GPU do the rest itself.
+ * and don't let the GPU go faster than 400 MHz.
*/
cpu_warm_limit_cpu {
trip = <&cpu_alert_warm>;
@@ -86,6 +84,10 @@
<&cpu2 THERMAL_NO_LIMIT 4>,
<&cpu3 THERMAL_NO_LIMIT 4>;
};
+ cpu_warm_limit_gpu {
+ trip = <&cpu_alert_warm>;
+ cooling-device = <&gpu 1 1>;
+ };
/*
* Add some discrete steps to help throttling system deal
@@ -125,11 +127,80 @@
<&cpu2 8 THERMAL_NO_LIMIT>,
<&cpu3 8 THERMAL_NO_LIMIT>;
};
+
+ /* At very hot, don't let GPU go over 300 MHz */
+ cpu_very_hot_limit_gpu {
+ trip = <&cpu_alert_very_hot>;
+ cooling-device = <&gpu 2 2>;
+ };
};
};
-&emmc {
- /delete-property/mmc-hs200-1_8v;
+&gpu_thermal {
+ /delete-node/ trips;
+ /delete-node/ cooling-maps;
+
+ trips {
+ gpu_alert_warmish: gpu_alert_warmish {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_alert_warm: gpu_alert_warm {
+ temperature = <65000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_alert_hotter: gpu_alert_hotter {
+ temperature = <84000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_alert_very_very_hot: gpu_alert_very_very_hot {
+ temperature = <86000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /* After 1st level throttle the GPU down to as low as 400 MHz */
+ gpu_warmish_limit_gpu {
+ trip = <&gpu_alert_warmish>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT 1>;
+ };
+
+ /*
+ * Slightly after we throttle the GPU, we'll also make sure that
+ * the CPU can't go faster than 1.4 GHz. Note that we won't
+ * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll
+ * let the CPU do the rest itself.
+ */
+ gpu_warm_limit_cpu {
+ trip = <&gpu_alert_warm>;
+ cooling-device = <&cpu0 4 4>,
+ <&cpu1 4 4>,
+ <&cpu2 4 4>,
+ <&cpu3 4 4>;
+ };
+
+ /* When hot, GPU goes down to 300 MHz */
+ gpu_hotter_limit_gpu {
+ trip = <&gpu_alert_hotter>;
+ cooling-device = <&gpu 2 2>;
+ };
+
+ /* When really hot, don't let GPU go _above_ 300 MHz */
+ gpu_very_very_hot_limit_gpu {
+ trip = <&gpu_alert_very_very_hot>;
+ cooling-device = <&gpu 2 THERMAL_NO_LIMIT>;
+ };
+ };
};
&i2c2 {
@@ -142,8 +213,6 @@
&i2s {
status = "okay";
- clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
- clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>;
};
&rk808 {
@@ -183,6 +252,157 @@
};
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "",
+ "",
+ "",
+ "PMIC_INT_L",
+ "POWER_BUTTON_L",
+ "",
+ "",
+
+ "",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OT_RESET",
+ "",
+ "",
+ "AP_WARM_RESET_H",
+ "",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "",
+ "nFALUT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "",
+ "EMMC_RST_L";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS_L",
+ "UART0_RTS_L",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio7 {
+ gpio-line-names = "",
+ "PWM_LOG",
+ "",
+ "",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "",
+
+ "CPU_NMI",
+ "DVSOK",
+ "HDMI_WAKE",
+ "POWER_HDMI_ON",
+ "DVS1",
+ "",
+ "",
+ "DVS2",
+
+ "HDMI_CEC",
+ "",
+ "",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
hdmi {
power_hdmi_on: power-hdmi-on {
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 468a1818545d..9008e703c07e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -48,6 +48,26 @@
regulator-boot-on;
vin-supply = <&vcc18_wl>;
};
+
+ volume_buttons: volume-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&volum_down_l &volum_up_l>;
+
+ volum_down {
+ label = "Volum_down";
+ gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <100>;
+ };
+
+ volum_up {
+ label = "Volum_up";
+ gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <100>;
+ };
+ };
};
&backlight {
@@ -86,30 +106,6 @@
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
power-supply = <&backlight_regulator>;
- post-pwm-on-delay-ms = <200>;
- pwm-off-delay-ms = <200>;
-};
-
-&emmc {
- /delete-property/mmc-hs200-1_8v;
-};
-
-&gpio_keys {
- pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>;
-
- volum_down {
- label = "Volum_down";
- gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <100>;
- };
-
- volum_up {
- label = "Volum_up";
- gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <100>;
- };
};
&i2c_tunnel {
@@ -188,6 +184,218 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "AP_LID_INT_L",
+ "EC_IN_RW",
+
+ "AC_PRESENT_AP",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OTP_OUT",
+ "HOST1_PWR_EN",
+ "USBOTG_PWREN_H",
+ "AP_WARM_RESET_H",
+ "nFALUT2",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "SUSPEND_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "PROCHOT#",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "AVDD_1V8_DISP_EN",
+ "TOUCH_INT",
+ "TOUCH_RST",
+
+ "I2C3_SCL_TP",
+ "I2C3_SDA_TP";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS",
+ "UART0_RTS",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "dev_wake",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "Volum_Up#",
+ "Volum_Down#",
+ "SPI0_CLK",
+ "SPI0_CS0",
+ "SPI0_TXD",
+ "SPI0_RXD",
+
+ "",
+ "",
+ "",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "",
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "SDMMC_D0",
+ "SDMMC_D1",
+ "SDMMC_D2",
+ "SDMMC_D3",
+ "SDMMC_CLK",
+ "SDMMC_CMD";
+};
+
+&gpio7 {
+ gpio-line-names = "LCDC_BL",
+ "PWM_LOG",
+ "BL_EN",
+ "TRACKPAD_INT",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "EC_INT",
+
+ "CPU_NMI",
+ "DVS_OK",
+ "SDMMC_WP",
+ "EDP_HPD",
+ "DVS1",
+ "nFALUT1",
+ "LCD_EN",
+ "DVS2",
+
+ "VCC5V_GOOD_H",
+ "I2C4_SDA_TP",
+ "I2C4_SCL_TP",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 9645be7b3d8c..9b6f4d9b03b6 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -35,7 +35,7 @@
force-hpd;
};
-&gpio_keys {
+&lid_switch {
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
power {
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index 2ac8748a3a0c..9b140db04456 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -64,6 +64,10 @@
temperature = <70000>;
};
+&cpu_crit {
+ temperature = <90000>;
+};
+
&edp {
/delete-property/pinctrl-names;
/delete-property/pinctrl-0;
@@ -71,6 +75,14 @@
force-hpd;
};
+&gpu_alert0 {
+ temperature = <80000>;
+};
+
+&gpu_crit {
+ temperature = <90000>;
+};
+
&panel {
power-supply= <&panel_regulator>;
};
@@ -101,6 +113,213 @@
pinctrl-0 = <&vcc50_hdmi_en>;
};
+&gpio0 {
+ gpio-line-names = "PMIC_SLEEP_AP",
+ "DDRIO_PWROFF",
+ "DDRIO_RETEN",
+ "TS3A227E_INT_L",
+ "PMIC_INT_L",
+ "PWR_KEY_L",
+ "AP_LID_INT_L",
+ "EC_IN_RW",
+
+ "AC_PRESENT_AP",
+ /*
+ * RECOVERY_SW_L is Chrome OS ABI. Schematics call
+ * it REC_MODE_L.
+ */
+ "RECOVERY_SW_L",
+ "OTP_OUT",
+ "HOST1_PWR_EN",
+ "USBOTG_PWREN_H",
+ "AP_WARM_RESET_H",
+ "nFALUT2",
+ "I2C0_SDA_PMIC",
+
+ "I2C0_SCL_PMIC",
+ "SUSPEND_L",
+ "USB_INT";
+};
+
+&gpio2 {
+ gpio-line-names = "CONFIG0",
+ "CONFIG1",
+ "CONFIG2",
+ "",
+ "",
+ "",
+ "",
+ "CONFIG3",
+
+ "PWRLIMIT#_CPU",
+ "EMMC_RST_L",
+ "",
+ "",
+ "BL_PWR_EN",
+ "AVDD_1V8_DISP_EN";
+};
+
+&gpio3 {
+ gpio-line-names = "FLASH0_D0",
+ "FLASH0_D1",
+ "FLASH0_D2",
+ "FLASH0_D3",
+ "FLASH0_D4",
+ "FLASH0_D5",
+ "FLASH0_D6",
+ "FLASH0_D7",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "FLASH0_CS2/EMMC_CMD",
+ "",
+ "FLASH0_DQS/EMMC_CLKO";
+};
+
+&gpio4 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "UART0_RXD",
+ "UART0_TXD",
+ "UART0_CTS",
+ "UART0_RTS",
+ "SDIO0_D0",
+ "SDIO0_D1",
+ "SDIO0_D2",
+ "SDIO0_D3",
+
+ "SDIO0_CMD",
+ "SDIO0_CLK",
+ "BT_DEV_WAKE",
+ "",
+ "WIFI_ENABLE_H",
+ "BT_ENABLE_L",
+ "WIFI_HOST_WAKE",
+ "BT_HOST_WAKE";
+};
+
+&gpio5 {
+ gpio-line-names = "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "",
+ "",
+ "",
+ "",
+ "SPI0_CLK",
+ "SPI0_CS0",
+ "SPI0_TXD",
+ "SPI0_RXD",
+
+ "",
+ "",
+ "",
+ "VCC50_HDMI_EN";
+};
+
+&gpio6 {
+ gpio-line-names = "I2S0_SCLK",
+ "I2S0_LRCK_RX",
+ "I2S0_LRCK_TX",
+ "I2S0_SDI",
+ "I2S0_SDO0",
+ "HP_DET_H",
+ "ALS_INT", /* not connected */
+ "INT_CODEC",
+
+ "I2S0_CLK",
+ "I2C2_SDA",
+ "I2C2_SCL",
+ "MICDET",
+ "",
+ "",
+ "",
+ "",
+
+ "SDMMC_D0",
+ "SDMMC_D1",
+ "SDMMC_D2",
+ "SDMMC_D3",
+ "SDMMC_CLK",
+ "SDMMC_CMD";
+};
+
+&gpio7 {
+ gpio-line-names = "LCDC_BL",
+ "PWM_LOG",
+ "BL_EN",
+ "TRACKPAD_INT",
+ "TPM_INT_H",
+ "SDMMC_DET_L",
+ /*
+ * AP_FLASH_WP_L is Chrome OS ABI. Schematics call
+ * it FW_WP_AP.
+ */
+ "AP_FLASH_WP_L",
+ "EC_INT",
+
+ "CPU_NMI",
+ "DVS_OK",
+ "",
+ "EDP_HOTPLUG",
+ "DVS1",
+ "nFALUT1",
+ "LCD_EN",
+ "DVS2",
+
+ "VCC5V_GOOD_H",
+ "I2C4_SDA_TP",
+ "I2C4_SCL_TP",
+ "I2C5_SDA_HDMI",
+ "I2C5_SCL_HDMI",
+ "5V_DRV",
+ "UART2_RXD",
+ "UART2_TXD";
+};
+
+&gpio8 {
+ gpio-line-names = "RAM_ID0",
+ "RAM_ID1",
+ "RAM_ID2",
+ "RAM_ID3",
+ "I2C1_SDA_TPM",
+ "I2C1_SCL_TPM",
+ "SPI2_CLK",
+ "SPI2_CS0",
+
+ "SPI2_RXD",
+ "SPI2_TXD";
+};
+
&pinctrl {
backlight {
bl_pwr_en: bl_pwr_en {
diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi
index 1d8bfed7830c..8fc8eac699bf 100644
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@@ -23,11 +23,36 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
- gpio_keys: gpio-keys {
+ bt_activity: bt-activity {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake>;
+
+ /*
+ * HACK: until we have an LPM driver, we'll use an
+ * ugly GPIO key to allow Bluetooth to wake from S3.
+ * This is expected to only be used by BT modules that
+ * use UART for comms. For BT modules that talk over
+ * SDIO we should use a wakeup mechanism related to SDIO.
+ *
+ * Use KEY_RESERVED here since that will work as a wakeup but
+ * doesn't get reported to higher levels (so doesn't confuse
+ * Chrome).
+ */
+ bt-wake {
+ label = "BT Wakeup";
+ gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESERVED>;
+ wakeup-source;
+ };
+
+ };
+ power_button: power-button {
+ compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pwr_key_l>;
+
power {
label = "Power";
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
@@ -123,6 +148,10 @@
cpu0-supply = <&vdd_cpu>;
};
+&cpu_crit {
+ temperature = <100000>;
+};
+
/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */
&cpu_opp_table {
/delete-node/ opp-312000000;
@@ -162,8 +191,18 @@
status = "okay";
};
+&gpu_alert0 {
+ temperature = <72500>;
+};
+
+&gpu_crit {
+ temperature = <100000>;
+};
+
&hdmi {
- ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default", "unwedge";
+ pinctrl-0 = <&hdmi_ddc>;
+ pinctrl-1 = <&hdmi_ddc_unwedge>;
status = "okay";
};
@@ -334,14 +373,6 @@
i2c-scl-rising-time-ns = <300>; /* 225ns measured */
};
-&i2c5 {
- status = "okay";
-
- clock-frequency = <100000>;
- i2c-scl-falling-time-ns = <300>;
- i2c-scl-rising-time-ns = <1000>;
-};
-
&io_domains {
status = "okay";
@@ -394,6 +425,7 @@
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-temp = <125000>;
};
&uart0 {
@@ -455,12 +487,18 @@
&ddr0_retention
&ddrio_pwroff
&global_pwroff
+
+ /* Wake only */
+ &bt_dev_wake_awake
>;
pinctrl-1 = <
/* Common for sleep and wake, but no owners */
&ddr0_retention
&ddrio_pwroff
&global_pwroff
+
+ /* Sleep only */
+ &bt_dev_wake_sleep
>;
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
@@ -544,6 +582,10 @@
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ bt_host_wake: bt-host-wake {
+ rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
/*
* We run sdio0 at max speed; bump up drive strength.
* We also have external pulls, so disable the internal ones.
@@ -562,6 +604,20 @@
sdio0_clk: sdio0-clk {
rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>;
};
+
+ /*
+ * These pins are only present on very new veyron boards; on
+ * older boards bt_dev_wake is simply always high. Note that
+ * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt
+ * to map this pin everywhere
+ */
+ bt_dev_wake_sleep: bt-dev-wake-sleep {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ bt_dev_wake_awake: bt-dev-wake-awake {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
};
tpm {
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aa017abf4f42..cc893e154fe5 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -231,6 +231,7 @@
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clock-frequency = <24000000>;
+ arm,no-tick-in-suspend;
};
timer: timer@ff810000 {
@@ -551,10 +552,7 @@
map0 {
trip = <&gpu_alert0>;
cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
@@ -682,7 +680,7 @@
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
- clocks = <&cru PCLK_PWM>;
+ clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
@@ -693,7 +691,7 @@
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm1_pin>;
- clocks = <&cru PCLK_PWM>;
+ clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
@@ -704,7 +702,7 @@
#pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pin>;
- clocks = <&cru PCLK_PWM>;
+ clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
@@ -712,10 +710,10 @@
pwm3: pwm@ff680030 {
compatible = "rockchip,rk3288-pwm";
reg = <0x0 0xff680030 0x0 0x10>;
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
pinctrl-names = "default";
pinctrl-0 = <&pwm3_pin>;
- clocks = <&cru PCLK_PWM>;
+ clocks = <&cru PCLK_RKPWM>;
clock-names = "pwm";
status = "disabled";
};
@@ -1285,6 +1283,7 @@
interrupt-names = "job", "mmu", "gpu";
clocks = <&cru ACLK_GPU>;
operating-points-v2 = <&gpu_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
power-domains = <&power RK3288_PD_GPU>;
status = "disabled";
};
@@ -1308,10 +1307,6 @@
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <1100000>;
};
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <1200000>;
- };
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1250000>;
@@ -1552,6 +1547,15 @@
rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>,
<7 RK_PC4 2 &pcfg_pull_none>;
};
+
+ hdmi_ddc_unwedge: hdmi-ddc-unwedge {
+ rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>,
+ <7 RK_PC4 2 &pcfg_pull_none>;
+ };
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
};
pcfg_pull_up: pcfg-pull-up {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 3bbc84bf8dbf..f770aace0efd 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1371,30 +1371,11 @@
status = "disabled";
};
- sckc@fffffe50 {
- compatible = "atmel,at91sam9x5-sckc";
+ clk32k: sckc@fffffe50 {
+ compatible = "atmel,sama5d3-sckc";
reg = <0xfffffe50 0x4>;
-
- slow_rc_osc: slow_rc_osc {
- compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-accuracy = <50000000>;
- atmel,startup-time-usec = <75>;
- };
-
- slow_osc: slow_osc {
- compatible = "atmel,at91sam9x5-clk-slow-osc";
- #clock-cells = <0>;
- clocks = <&slow_xtal>;
- atmel,startup-time-usec = <1200000>;
- };
-
- clk32k: slowck {
- compatible = "atmel,at91sam9x5-clk-slow";
- #clock-cells = <0>;
- clocks = <&slow_rc_osc &slow_osc>;
- };
+ clocks = <&slow_xtal>;
+ #clock-cells = <0>;
};
rtc@fffffeb0 {
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index daac0c6078c5..1916f31a30ff 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -36,7 +36,7 @@
};
chosen {
- bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ bootargs = "root=/dev/nfs ip=on ignore_loglevel rw";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index ae24599d5829..a0a6d8507265 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -418,7 +418,7 @@
};
gmac0: ethernet@ff800000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
altr,sysmgr-syscon = <&sysmgr 0x44 0>;
reg = <0xff800000 0x2000>;
interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -431,15 +431,15 @@
rx-fifo-depth = <16384>;
clocks = <&l4_mp_clk>;
clock-names = "stmmaceth";
- resets = <&rst EMAC0_RESET>;
- reset-names = "stmmaceth";
+ resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+ reset-names = "stmmaceth", "stmmaceth-ocp";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
};
gmac1: ethernet@ff802000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
- altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x48 8>;
reg = <0xff802000 0x2000>;
interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -451,15 +451,15 @@
rx-fifo-depth = <16384>;
clocks = <&l4_mp_clk>;
clock-names = "stmmaceth";
- resets = <&rst EMAC1_RESET>;
- reset-names = "stmmaceth";
+ resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+ reset-names = "stmmaceth", "stmmaceth-ocp";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
};
gmac2: ethernet@ff804000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
- altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac";
+ altr,sysmgr-syscon = <&sysmgr 0x4C 16>;
reg = <0xff804000 0x2000>;
interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
@@ -470,8 +470,9 @@
tx-fifo-depth = <4096>;
rx-fifo-depth = <16384>;
clocks = <&l4_mp_clk>;
- resets = <&rst EMAC2_RESET>;
clock-names = "stmmaceth";
+ resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+ reset-names = "stmmaceth", "stmmaceth-ocp";
snps,axi-config = <&socfpga_axi_setup>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 360dae5a5b12..0efbeccc5cd2 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -48,6 +48,13 @@
};
};
+ ref_033v: 033-v-ref {
+ compatible = "regulator-fixed";
+ regulator-name = "0.33V";
+ regulator-min-microvolt = <330000>;
+ regulator-max-microvolt = <330000>;
+ };
+
soc {
clkmgr@ffd04000 {
clocks {
@@ -128,6 +135,18 @@
i2c-sda-falling-time-ns = <6000>;
i2c-scl-falling-time-ns = <6000>;
+ adc@14 {
+ compatible = "lltc,ltc2497";
+ reg = <0x14>;
+ vref-supply = <&ref_033v>;
+ };
+
+ adc@16 {
+ compatible = "lltc,ltc2497";
+ reg = <0x16>;
+ vref-supply = <&ref_033v>;
+ };
+
eeprom@51 {
compatible = "atmel,24c32";
reg = <0x51>;
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index d90b0d1e18c7..2b1664884ae7 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -44,6 +44,7 @@
#include "stm32f746.dtsi"
#include "stm32f746-pinctrl.dtsi"
#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "STMicroelectronics STM32746g-EVAL board";
@@ -69,9 +70,15 @@
gpios = <&gpiof 10 1>;
linux,default-trigger = "heartbeat";
};
+ orange {
+ gpios = <&stmfx_pinctrl 17 1>;
+ };
red {
gpios = <&gpiob 7 1>;
};
+ blue {
+ gpios = <&stmfx_pinctrl 19 1>;
+ };
};
gpio_keys {
@@ -86,6 +93,43 @@
};
};
+ joystick {
+ compatible = "gpio-keys";
+ #size-cells = <0>;
+ pinctrl-0 = <&joystick_pins>;
+ pinctrl-names = "default";
+ button-0 {
+ label = "JoySel";
+ linux,code = <KEY_ENTER>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ };
+ button-1 {
+ label = "JoyDown";
+ linux,code = <KEY_DOWN>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+ button-2 {
+ label = "JoyLeft";
+ linux,code = <KEY_LEFT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ };
+ button-3 {
+ label = "JoyRight";
+ linux,code = <KEY_RIGHT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+ button-4 {
+ label = "JoyUp";
+ linux,code = <KEY_UP>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
usbotg_hs_phy: usb-phy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
@@ -115,6 +159,28 @@
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+
+ stmfx: stmfx@42 {
+ compatible = "st,stmfx-0300";
+ reg = <0x42>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpioi>;
+
+ stmfx_pinctrl: stmfx-pin-controller {
+ compatible = "st,stmfx-0300-pinctrl";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+ joystick_pins: joystick {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+ };
};
&rtc {
diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 85c417d9983b..df6470133574 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -26,6 +26,7 @@
st,bank-name = "GPIOA";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 0 16>;
+ status = "disabled";
};
gpiob: gpio@50003000 {
@@ -38,6 +39,7 @@
st,bank-name = "GPIOB";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 16 16>;
+ status = "disabled";
};
gpioc: gpio@50004000 {
@@ -50,6 +52,7 @@
st,bank-name = "GPIOC";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 32 16>;
+ status = "disabled";
};
gpiod: gpio@50005000 {
@@ -62,6 +65,7 @@
st,bank-name = "GPIOD";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 48 16>;
+ status = "disabled";
};
gpioe: gpio@50006000 {
@@ -74,6 +78,7 @@
st,bank-name = "GPIOE";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 64 16>;
+ status = "disabled";
};
gpiof: gpio@50007000 {
@@ -86,6 +91,7 @@
st,bank-name = "GPIOF";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 80 16>;
+ status = "disabled";
};
gpiog: gpio@50008000 {
@@ -98,6 +104,7 @@
st,bank-name = "GPIOG";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 96 16>;
+ status = "disabled";
};
gpioh: gpio@50009000 {
@@ -110,6 +117,7 @@
st,bank-name = "GPIOH";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 112 16>;
+ status = "disabled";
};
gpioi: gpio@5000a000 {
@@ -122,6 +130,7 @@
st,bank-name = "GPIOI";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 128 16>;
+ status = "disabled";
};
gpioj: gpio@5000b000 {
@@ -134,6 +143,7 @@
st,bank-name = "GPIOJ";
ngpios = <16>;
gpio-ranges = <&pinctrl 0 144 16>;
+ status = "disabled";
};
gpiok: gpio@5000c000 {
@@ -146,6 +156,7 @@
st,bank-name = "GPIOK";
ngpios = <8>;
gpio-ranges = <&pinctrl 0 160 8>;
+ status = "disabled";
};
cec_pins_a: cec-0 {
@@ -178,6 +189,47 @@
};
};
+ dcmi_pins_a: dcmi-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */
+ <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */
+ <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+ bias-disable;
+ };
+ };
+
+ dcmi_sleep_pins_a: dcmi-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */
+ <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */
+ <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
@@ -241,6 +293,23 @@
};
};
+ i2c1_pins_b: i2c1-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_sleep_b: i2c1-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
i2c2_pins_a: i2c2-0 {
pins {
pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
@@ -258,6 +327,21 @@
};
};
+ i2c2_pins_b1: i2c2-2 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b1: i2c2-3 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
i2c5_pins_a: i2c5-0 {
pins {
pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
@@ -276,6 +360,25 @@
};
};
+ i2s2_pins_a: i2s2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ i2s2_pins_sleep_a: i2s2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+ };
+ };
+
ltdc_pins_a: ltdc-a-0 {
pins {
pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
@@ -470,6 +573,12 @@
};
};
+ qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+ };
+ };
+
qspi_bk1_pins_a: qspi-bk1-0 {
pins1 {
pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
@@ -488,6 +597,16 @@
};
};
+ qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+ <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+ };
+ };
+
qspi_bk2_pins_a: qspi-bk2-0 {
pins1 {
pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
@@ -506,6 +625,89 @@
};
};
+ qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+ <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+ };
+ };
+
+ sai2a_pins_a: sai2a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai2a_sleep_pins_a: sai2a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+ };
+ };
+
+ sai2b_pins_a: sai2b-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_a: sai2b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+ };
+ };
+
+ sai2b_pins_b: sai2b-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_b: sai2b-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+ };
+ };
+
+ sai4a_pins_a: sai4a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai4a_sleep_pins_a: sai4a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+ };
+ };
+
sdmmc1_b4_pins_a: sdmmc1-b4-0 {
pins {
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
@@ -599,6 +801,34 @@
bias-disable;
};
};
+
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+ bias-disable;
+ };
+ };
};
pinctrl_z: pin-controller-z@54004000 {
@@ -621,6 +851,22 @@
st,bank-ioport = <11>;
ngpios = <8>;
gpio-ranges = <&pinctrl_z 0 400 8>;
+ status = "disabled";
+ };
+
+ i2c2_pins_b2: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b2: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+ };
};
i2c4_pins_a: i2c4-0 {
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
new file mode 100644
index 000000000000..2e4742c53d04
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157xac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ model = "Arrow Electronics STM32MP157A Avenger96 board";
+ compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = &ethernet0;
+ mmc0 = &sdmmc1;
+ serial0 = &uart4;
+ serial1 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x40000000>;
+ };
+
+ led {
+ compatible = "gpio-leds";
+ led1 {
+ label = "green:user1";
+ gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led2 {
+ label = "green:user2";
+ gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led3 {
+ label = "green:user3";
+ gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ led4 {
+ label = "green:user3";
+ gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ panic-indicator;
+ };
+
+ led5 {
+ label = "yellow:wifi";
+ gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ led6 {
+ label = "blue:bt";
+ gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+};
+
+&ethernet0 {
+ status = "okay";
+ pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+ pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy@7 {
+ reg = <7>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_b>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ pmic: stpmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ st,main-control-register = <0x04>;
+ st,vin-control-register = <0xc0>;
+ st,usb-control-register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ ldo1-supply = <&v3v3>;
+ ldo2-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo5-supply = <&v3v3>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask_reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ vdda: ldo1 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ v2v8: ldo2 {
+ regulator-name = "v2v8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ interrupt-parent = <&pmic>;
+ regulator-boot-on;
+ };
+
+ v1v8: ldo6 {
+ regulator-name = "v1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ interrupt-parent = <&pmic>;
+ regulator-enable-ramp-delay = <300000>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ interrupt-parent = <&pmic>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ interrupt-parent = <&pmic>;
+ regulator-active-discharge;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ interrupt-parent = <&pmic>;
+ regulator-active-discharge;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,sig-dir;
+ st,neg-edge;
+ st,use-ckin;
+ bus-width = <4>;
+ vmmc-supply = <&vdd_sd>;
+ status = "okay";
+};
+
+&uart4 {
+ /* On Low speed expansion header */
+ label = "LS-UART1";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_b>;
+ status = "okay";
+};
+
+&uart7 {
+ /* On Low speed expansion header */
+ label = "LS-UART0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 098dbfb06b61..f3f0e37aad4d 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -7,7 +7,7 @@
/dts-v1/;
#include "stm32mp157c.dtsi"
-#include "stm32mp157-pinctrl.dtsi"
+#include "stm32mp157xac-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
@@ -28,6 +28,17 @@
reg = <0xc0000000 0x20000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpu_reserved: gpu@d4000000 {
+ reg = <0xd4000000 0x4000000>;
+ no-map;
+ };
+ };
+
led {
compatible = "gpio-leds";
blue {
@@ -51,7 +62,7 @@
pinctrl-0 = <&ethernet0_rgmii_pins_a>;
pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
pinctrl-names = "default", "sleep";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
max-speed = <1000>;
phy-handle = <&phy0>;
@@ -65,6 +76,47 @@
};
};
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ hdmi-transmitter@39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ iovcc-supply = <&v3v3_hdmi>;
+ cvcc12-supply = <&v1v2_hdmi>;
+ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiog>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&ltdc_pins_a>;
+ pinctrl-1 = <&ltdc_pins_sleep_a>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sii9022_in: endpoint {
+ remote-endpoint = <&ltdc_ep0_out>;
+ };
+ };
+ };
+ };
+};
&i2c4 {
pinctrl-names = "default";
@@ -223,6 +275,20 @@
status = "okay";
};
+&ltdc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
&rng1 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 62a8c78e7e2e..4fe7f71a74d3 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -6,7 +6,7 @@
/dts-v1/;
#include "stm32mp157c.dtsi"
-#include "stm32mp157-pinctrl.dtsi"
+#include "stm32mp157xaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
@@ -23,6 +23,17 @@
reg = <0xC0000000 0x40000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpu_reserved: gpu@e8000000 {
+ reg = <0xe8000000 0x8000000>;
+ no-map;
+ };
+ };
+
aliases {
serial0 = &uart4;
};
@@ -61,6 +72,11 @@
status = "okay";
};
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index b6aca40b9b90..feb8f7727270 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -7,6 +7,7 @@
#include "stm32mp157c-ed1.dts"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
@@ -21,6 +22,51 @@
ethernet0 = &ethernet0;
};
+ clocks {
+ clk_ext_camera: clk-ext-camera {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ joystick {
+ compatible = "gpio-keys";
+ #size-cells = <0>;
+ pinctrl-0 = <&joystick_pins>;
+ pinctrl-names = "default";
+ button-0 {
+ label = "JoySel";
+ linux,code = <KEY_ENTER>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-1 {
+ label = "JoyDown";
+ linux,code = <KEY_DOWN>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-2 {
+ label = "JoyLeft";
+ linux,code = <KEY_LEFT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-3 {
+ label = "JoyRight";
+ linux,code = <KEY_RIGHT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-4 {
+ label = "JoyUp";
+ linux,code = <KEY_UP>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
panel_backlight: panel-backlight {
compatible = "gpio-backlight";
gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
@@ -35,6 +81,23 @@
status = "okay";
};
+&dcmi {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcmi_pins_a>;
+ pinctrl-1 = <&dcmi_sleep_pins_a>;
+
+ port {
+ dcmi_0: endpoint {
+ remote-endpoint = <&ov5640_0>;
+ bus-width = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+};
+
&dsi {
#address-cells = <1>;
#size-cells = <0>;
@@ -64,6 +127,7 @@
reg = <0>;
reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
backlight = <&panel_backlight>;
+ power-supply = <&v3v3>;
status = "okay";
port {
@@ -79,7 +143,7 @@
pinctrl-0 = <&ethernet0_rgmii_pins_a>;
pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
pinctrl-names = "default", "sleep";
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
max-speed = <1000>;
phy-handle = <&phy0>;
@@ -99,6 +163,60 @@
i2c-scl-rising-time-ns = <185>;
i2c-scl-falling-time-ns = <20>;
status = "okay";
+
+ ov5640: camera@3c {
+ compatible = "ovti,ov5640";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ov5640_pins>;
+ reg = <0x3c>;
+ clocks = <&clk_ext_camera>;
+ clock-names = "xclk";
+ DOVDD-supply = <&v2v8>;
+ powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>;
+ rotation = <180>;
+ status = "okay";
+
+ port {
+ ov5640_0: endpoint {
+ remote-endpoint = <&dcmi_0>;
+ bus-width = <8>;
+ data-shift = <2>; /* lines 9:2 are used */
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pclk-sample = <1>;
+ };
+ };
+ };
+
+ stmfx: stmfx@42 {
+ compatible = "st,stmfx-0300";
+ reg = <0x42>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpioi>;
+ vdd-supply = <&v3v3>;
+
+ stmfx_pinctrl: stmfx-pin-controller {
+ compatible = "st,stmfx-0300-pinctrl";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+ joystick_pins: joystick {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+ drive-push-pull;
+ bias-pull-down;
+ };
+
+ ov5640_pins: camera {
+ pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
+ drive-push-pull;
+ output-low;
+ };
+ };
+ };
};
&i2c5 {
@@ -131,14 +249,16 @@
};
&qspi {
- pinctrl-names = "default";
+ pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
+ pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: mx66l51235l@0 {
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
@@ -147,6 +267,7 @@
};
flash1: mx66l51235l@1 {
+ compatible = "jedec,spi-nor";
reg = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 2afeee65c3ea..0c4e6ebc3529 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -365,6 +365,17 @@
status = "disabled";
};
+ i2s2: audio-controller@4000b000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000b000 0x400>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 39 0x400 0x01>,
+ <&dmamux1 40 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
spi3: spi@4000c000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -379,6 +390,17 @@
status = "disabled";
};
+ i2s3: audio-controller@4000c000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x4000c000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 61 0x400 0x01>,
+ <&dmamux1 62 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
spdifrx: audio-controller@4000d000 {
compatible = "st,stm32h7-spdifrx";
#sound-dai-cells = <0>;
@@ -607,6 +629,17 @@
status = "disabled";
};
+ i2s1: audio-controller@44004000 {
+ compatible = "st,stm32h7-i2s";
+ #sound-dai-cells = <0>;
+ reg = <0x44004000 0x400>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dmamux1 37 0x400 0x01>,
+ <&dmamux1 38 0x400 0x01>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
spi4: spi@44005000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -708,6 +741,100 @@
status = "disabled";
};
+ sai1: sai@4400a000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400a000 0x400>;
+ reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI1_R>;
+ status = "disabled";
+
+ sai1a: audio-controller@4400a004 {
+ #sound-dai-cells = <0>;
+
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1c>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 87 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai1b: audio-controller@4400a024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI1_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 88 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ sai2: sai@4400b000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400b000 0x400>;
+ reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI2_R>;
+ status = "disabled";
+
+ sai2a: audio-controller@4400b004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x4 0x1c>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 89 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai2b: audio-controller@4400b024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 90 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
+ sai3: sai@4400c000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x4400c000 0x400>;
+ reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI3_R>;
+ status = "disabled";
+
+ sai3a: audio-controller@4400c004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x1c>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 113 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai3b: audio-controller@4400c024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI3_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 114 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
dfsdm: dfsdm@4400d000 {
compatible = "st,stm32mp1-dfsdm";
reg = <0x4400d000 0x800>;
@@ -914,6 +1041,18 @@
status = "disabled";
};
+ dcmi: dcmi@4c006000 {
+ compatible = "st,stm32-dcmi";
+ reg = <0x4c006000 0x400>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc CAMITF_R>;
+ clocks = <&rcc DCMI>;
+ clock-names = "mclk";
+ dmas = <&dmamux1 75 0x400 0x0d>;
+ dma-names = "tx";
+ status = "disabled";
+ };
+
rcc: rcc@50000000 {
compatible = "st,stm32mp1-rcc", "syscon";
reg = <0x50000000 0x1000>;
@@ -1020,6 +1159,37 @@
status = "disabled";
};
+ sai4: sai@50027000 {
+ compatible = "st,stm32h7-sai";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50027000 0x400>;
+ reg = <0x50027000 0x4>, <0x500273f0 0x10>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ resets = <&rcc SAI4_R>;
+ status = "disabled";
+
+ sai4a: audio-controller@50027004 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-a";
+ reg = <0x04 0x1c>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 99 0x400 0x01>;
+ status = "disabled";
+ };
+
+ sai4b: audio-controller@50027024 {
+ #sound-dai-cells = <0>;
+ compatible = "st,stm32-sai-sub-b";
+ reg = <0x24 0x1c>;
+ clocks = <&rcc SAI4_K>;
+ clock-names = "sai_ck";
+ dmas = <&dmamux1 100 0x400 0x01>;
+ status = "disabled";
+ };
+ };
+
dts: thermal@50028000 {
compatible = "st,stm32-thermal";
reg = <0x50028000 0x100>;
@@ -1149,6 +1319,16 @@
status = "disabled";
};
+ gpu: gpu@59000000 {
+ compatible = "vivante,gc";
+ reg = <0x59000000 0x800>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc GPU>, <&rcc GPU_K>;
+ clock-names = "bus" ,"core";
+ resets = <&rcc GPU_R>;
+ status = "disabled";
+ };
+
dsi: dsi@5a000000 {
compatible = "st,stm32-dsi";
reg = <0x5a000000 0x800>;
diff --git a/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
new file mode 100644
index 000000000000..875adf5e1e30
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157xaa-pinctrl.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
new file mode 100644
index 000000000000..961fa12a59c3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157xab-pinctrl.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP_PKG_AB>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
new file mode 100644
index 000000000000..26600f188d25
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157xac-pinctrl.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <12>;
+ gpio-ranges = <&pinctrl 0 128 12>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z@54004000 {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
new file mode 100644
index 000000000000..910113f3e69a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157xad-pinctrl.dtsi
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@st.com>
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller@50002000 {
+ st,package = <STM32MP_PKG_AD>;
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun5i-gr8-evb.dts b/arch/arm/boot/dts/sun5i-gr8-evb.dts
index d003b895a696..4c20d731a9c6 100644
--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@@ -150,7 +150,7 @@
};
pcf8563: rtc@51 {
- compatible = "phg,pcf8563";
+ compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c04efad81bbc..dcddc3392460 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -216,6 +216,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
+ clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
@@ -223,7 +224,8 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ clock-accuracy = <50000>;
+ clock-output-names = "ext_osc32k";
};
/*
@@ -588,7 +590,7 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun6i-a31-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -601,7 +603,7 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
@@ -987,6 +989,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI0>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi1: spi@1c69000 {
@@ -999,6 +1003,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI1>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi2: spi@1c6a000 {
@@ -1011,6 +1017,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI2>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
spi3: spi@1c6b000 {
@@ -1023,6 +1031,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI3>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
gic: interrupt-controller@1c81000 {
@@ -1279,10 +1289,13 @@
};
rtc: rtc@1f00000 {
+ #clock-cells = <1>;
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc32k>;
+ clock-output-names = "osc32k";
};
nmi_intc: interrupt-controller@1f00c00 {
@@ -1300,7 +1313,7 @@
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>,
+ clocks = <&rtc 0>, <&osc24M>,
<&ccu CLK_PLL_PERIPH>,
<&ccu CLK_PLL_PERIPH>;
clock-output-names = "ar100";
@@ -1335,7 +1348,7 @@
ir_clk: ir_clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
- clocks = <&osc32k>, <&osc24M>;
+ clocks = <&rtc 0>, <&osc24M>;
clock-output-names = "ir";
};
@@ -1365,7 +1378,7 @@
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+ clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
resets = <&apb0_rst 0>;
gpio-controller;
diff --git a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
index 949494730aee..7449aac3f43b 100644
--- a/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
+++ b/arch/arm/boot/dts/sun7i-a20-icnova-swac.dts
@@ -49,7 +49,8 @@
/ {
model = "ICnova-A20 SWAC";
- compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
+ compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
+ "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 95c6f8949076..56f451c07f93 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -194,6 +194,14 @@
#include "axp209.dtsi"
+&ac_power_supply {
+ status = "okay";
+};
+
+&battery_power_supply {
+ status = "okay";
+};
+
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 66d078053d5f..568b90ece342 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -224,14 +224,14 @@
vref-supply = <&reg_aldo2>;
status = "okay";
- button@210 {
+ button-210 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <210000>;
};
- button@410 {
+ button-410 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 392b0cabbf0d..ada6d08bc540 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -679,6 +679,20 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
+ /omit-if-no-ref/
+ csi_8bit_parallel_pins: csi-8bit-parallel-pins {
+ pins = "PE0", "PE2", "PE3", "PE6", "PE7",
+ "PE8", "PE9", "PE10", "PE11",
+ "PE12", "PE13";
+ function = "csi";
+ };
+
+ /omit-if-no-ref/
+ csi_mclk_pin: csi-mclk-pin {
+ pins = "PE1";
+ function = "csi";
+ };
+
emac_rgmii_pins: emac-rgmii-pins {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD11", "PD12", "PD13", "PD14", "PD18",
@@ -997,6 +1011,21 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ csi: camera@1cb0000 {
+ compatible = "allwinner,sun8i-a83t-csi";
+ reg = <0x01cb0000 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_CSI>,
+ <&ccu CLK_CSI_SCLK>,
+ <&ccu CLK_DRAM_CSI>;
+ clock-names = "bus", "mod", "ram";
+ resets = <&ccu RST_BUS_CSI>;
+ status = "disabled";
+
+ csi_in: port {
+ };
+ };
+
hdmi: hdmi@1ee0000 {
compatible = "allwinner,sun8i-a83t-dw-hdmi";
reg = <0x01ee0000 0x10000>;
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index 78a37a47185a..d277d043031b 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -59,8 +59,7 @@
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
enable-active-high;
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0>, <1300000 1>;
};
wifi_pwrseq: wifi_pwrseq {
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
index 4970eda2877e..f19ed981da9d 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
@@ -102,8 +102,7 @@
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
enable-active-high;
gpios-states = <1>;
- states = <1100000 0
- 1300000 1>;
+ states = <1100000 0>, <1300000 1>;
};
wifi_pwrseq: wifi_pwrseq {
diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
index 6277f13f3eb3..ac9e26b1d906 100644
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@@ -90,6 +90,8 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
sound_spdif {
@@ -155,6 +157,8 @@
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
+ vqmmc-supply = <&reg_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
index 840849169bed..4759ba3f2986 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-one.dts
@@ -109,8 +109,7 @@
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
enable-active-high;
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0>, <1300000 1>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c488aaacbd68..42d62d1ba1dc 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -201,10 +201,15 @@
&pio {
pinctrl-names = "default";
pinctrl-0 = <&clk_out_a_pin>;
+ vcc-pa-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_eldo1>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_dldo1>;
};
&reg_aldo2 {
- regulator-always-on;
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-name = "vcc-pa";
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index bb856e53b806..6007d0cc252d 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -318,8 +318,7 @@
};
rtc: rtc@1c20400 {
- compatible = "allwinner,sun8i-r40-rtc",
- "allwinner,sun8i-h3-rtc";
+ compatible = "allwinner,sun8i-r40-rtc";
reg = <0x01c20400 0x400>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k", "osc32k-out";
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index df72b1719c34..d7aef128acb3 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -84,6 +84,7 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
+ clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
@@ -91,7 +92,8 @@
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
- clock-output-names = "osc32k";
+ clock-accuracy = <50000>;
+ clock-output-names = "ext-osc32k";
};
};
@@ -264,17 +266,20 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun8i-v3s-ccu";
reg = <0x01c20000 0x400>;
- clocks = <&osc24M>, <&osc32k>;
+ clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
};
rtc: rtc@1c20400 {
- compatible = "allwinner,sun6i-a31-rtc";
+ #clock-cells = <1>;
+ compatible = "allwinner,sun8i-v3-rtc";
reg = <0x01c20400 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc32k>;
+ clock-output-names = "osc32k", "osc32k-out";
};
pio: pinctrl@1c20800 {
@@ -282,7 +287,7 @@
reg = <0x01c20800 0x400>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
+ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
#gpio-cells = <3>;
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index f05cabd34b8e..15c22b06fc4b 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -50,6 +50,7 @@
compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
aliases {
+ ethernet0 = &gmac;
serial0 = &uart0;
};
@@ -57,6 +58,17 @@
stdout-path = "serial0:115200n8";
};
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -84,14 +96,52 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "ext_clock";
};
};
+&ahci {
+ ahci-supply = <&reg_dldo4>;
+ phy-supply = <&reg_eldo3>;
+ status = "okay";
+};
+
+&de {
+ status = "okay";
+};
+
&ehci1 {
/* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */
status = "okay";
};
+&gmac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_rgmii_pins>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <&reg_dc1sw>;
+ status = "okay";
+};
+
+&gmac_mdio {
+ phy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c0 {
status = "okay";
@@ -123,6 +173,23 @@
status = "okay";
};
+&pio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&clk_out_a_pin>;
+ vcc-pa-supply = <&reg_aldo2>;
+ vcc-pc-supply = <&reg_dcdc1>;
+ vcc-pd-supply = <&reg_dcdc1>;
+ vcc-pe-supply = <&reg_eldo1>;
+ vcc-pf-supply = <&reg_dcdc1>;
+ vcc-pg-supply = <&reg_dldo1>;
+};
+
+&reg_aldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vcc-pa";
+};
+
&reg_aldo3 {
regulator-always-on;
regulator-min-microvolt = <2700000>;
@@ -130,6 +197,12 @@
regulator-name = "avcc";
};
+&reg_dc1sw {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "vcc-gmac-phy";
+};
+
&reg_dcdc1 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
@@ -164,18 +237,68 @@
regulator-name = "vcc-wifi-io";
};
+/*
+ * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same
+ * time, with the two being in sync, to be able to meet maximum power
+ * consumption during transmits. Since this is not really supported
+ * right now, just use the two as always on, and we will fix it later.
+ */
+
&reg_dldo2 {
+ regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
};
+&reg_dldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+};
+
+&reg_dldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd2v5-sata";
+};
+
+&reg_eldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd1v2-sata";
+};
+
+&tcon_tv0 {
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&ccu CLK_OUTA>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo2>;
+ vddio-supply = <&reg_dldo1>;
+ device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ /* TODO host wake line connected to PMIC GPIO pins */
+ shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */
+ max-speed = <1500000>;
+ };
+};
+
&usbphy {
usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 53edd1faee99..22466afd38a3 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -21,8 +21,7 @@
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0>, <1300000 1>;
};
};
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index 3aaca10f6644..f2d060f403cc 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -77,4 +77,8 @@
&nand {
status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index c2706cef0b8a..58cd4e8fa5be 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -403,9 +403,11 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand2cs>;
+ pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 3d9080ee7aef..60994b6e8b99 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -90,4 +90,8 @@
&nand {
status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 28038b17bbb3..854f2eba3e72 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -98,4 +98,8 @@
&nand {
status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 97d051ef4968..7f64e5a616d6 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -593,6 +593,8 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 365738739412..eff74717b37c 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -458,9 +458,11 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand2cs>;
+ pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 06a049f6edf8..4eddbb8d7fca 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -766,9 +766,11 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand2cs>;
+ pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index 01bf94c6b93a..cf9ea0b15065 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -81,4 +81,8 @@
&nand {
status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
};
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index efce02768b6f..cbebb6e4c616 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -407,9 +407,11 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_nand2cs>;
+ pinctrl-0 = <&pinctrl_nand>;
clock-names = "nand", "nand_x", "ecc";
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 269e6bf99ccb..37bd41ff8dff 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -161,6 +161,9 @@
compatible = "arm,versatile-flash", "cfi-flash";
reg = <0x34000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
i2c0: i2c@10002000 {
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index d3963e9eaf48..d6a1fc269241 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -30,11 +30,14 @@
#interrupt-cells = <1>;
ranges;
- flash@0,00000000 {
+ nor_flash: flash@0,00000000 {
compatible = "arm,vexpress-flash", "cfi-flash";
reg = <0 0x00000000 0x04000000>,
<4 0x00000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
psram@1,00000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index 798c97aff7fa..8e57e15307e2 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -35,6 +35,9 @@
reg = <0 0x00000000 0x04000000>,
<1 0x00000000 0x04000000>;
bank-width = <4>;
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
psram@2,00000000 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 00cd9f5bef2e..1de0a658adf1 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -440,7 +440,7 @@
/* non-configurable replicators don't show up on the
* AMBA bus. As such no need to add "arm,primecell".
*/
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
out-ports {
#address-cells = <1>;
@@ -471,7 +471,7 @@
};
funnel@20040000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
clocks = <&oscclk6a>;
@@ -680,3 +680,12 @@
<0 3 &gic 0 39 4>;
};
};
+
+&nor_flash {
+ /*
+ * Unfortunately, accessing the flash disturbs the CPU idle states
+ * (suspend) and CPU hotplug of this platform. For this reason, flash
+ * hardware access is disabled by default on this platform alone.
+ */
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 0507e6dcbb21..a1b4ccee2a10 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -177,6 +177,36 @@
status = "okay";
};
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0>;
+ status = "okay";
+
+ /*
+ * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR
+ * modes, so, spi-max-frequency is limited to 90MHz
+ */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <0>;
+ m25p,fast-read;
+ };
+
+ flash@2 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <90000000>;
+ spi-rx-bus-width = <4>;
+ reg = <2>;
+ m25p,fast-read;
+ };
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
@@ -360,12 +390,18 @@
pinctrl_qspi0: qspi0grp {
fsl,pins = <
- VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3
- VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff
- VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3
- VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3
- VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3
- VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3
+ VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2
+ VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2
+ VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3
+ VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3
+ VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3
+ VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3
+ VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2
+ VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2
+ VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3
+ VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3
+ VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3
+ VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3
>;
};
@@ -385,8 +421,8 @@
pinctrl_uart2: uart2grp {
fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD23__UART2_TX 0x21a2
+ VF610_PAD_PTD22__UART2_RX 0x21a1
>;
};
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 4a8cad4d3707..9a32a8c0f873 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -45,6 +45,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPUFREQ_DT=m
CONFIG_CPU_IDLE=y
CONFIG_NET=y
CONFIG_PACKET=y
diff --git a/arch/arm64/boot/dts/allwinner/axp803.dtsi b/arch/arm64/boot/dts/allwinner/axp803.dtsi
index c3a618e1279a..f0349ef4bfdd 100644
--- a/arch/arm64/boot/dts/allwinner/axp803.dtsi
+++ b/arch/arm64/boot/dts/allwinner/axp803.dtsi
@@ -185,4 +185,10 @@
status = "disabled";
};
};
+
+ usb_power_supply: usb-power-supply {
+ compatible = "x-powers,axp803-usb-power-supply",
+ "x-powers,axp813-usb-power-supply";
+ status = "disabled";
+ };
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index 019ae09ea0fd..5634245d11db 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -85,8 +85,6 @@
};
&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
status = "okay";
sensor@48 {
@@ -99,6 +97,22 @@
bias-pull-up;
};
+&i2c1 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt5663";
+ reg = <0x5d>;
+ AVDD28-supply = <&reg_ldo_io0>; /* VCC-CTP: GPIO0-LDO */
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+};
+
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
@@ -262,6 +276,13 @@
regulator-name = "vdd-cpus";
};
+&reg_ldo_io0 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vcc-ctp";
+ status = "okay";
+};
+
&reg_rtc_ldo {
regulator-name = "vcc-rtc";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 0a56c0c23ba1..208373efee49 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -145,8 +145,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
@@ -394,8 +392,13 @@
status = "okay";
};
+&usb_power_supply {
+ status = "okay";
+};
+
&usbphy {
usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index f4e78531f639..9b9d9157128c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -120,12 +120,6 @@
};
/* i2c1 connected with gpio headers like pine64, bananapi */
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "disabled";
-};
-
&i2c1_pins {
bias-pull-up;
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
index 6a2154525d1e..787ebd805a3b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -37,6 +37,22 @@
status = "okay";
};
+&i2c0 {
+ status = "okay";
+
+ touchscreen@5d {
+ compatible = "goodix,gt911";
+ reg = <0x5d>;
+ AVDD28-supply = <&reg_ldo_io0>; /* VDD_CTP: GPIO0-LDO */
+ interrupt-parent = <&pio>;
+ interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */
+ reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
@@ -52,6 +68,13 @@
regulator-name = "vcc-phy";
};
+&reg_ldo_io0 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-name = "vdd-ctp";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 510f661229dc..5ef3c62c765e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -109,6 +109,8 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
};
};
@@ -170,6 +172,14 @@
bus-width = <4>;
non-removable;
status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
};
&ohci0 {
@@ -342,7 +352,20 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <1500000>;
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ vbat-supply = <&reg_dldo2>;
+ vddio-supply = <&reg_dldo4>;
+ device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
+ shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+ };
};
/* On Pi-2 connector, RTS/CTS optional */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index b7ac6374b178..409523cb0950 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -122,8 +122,6 @@
};
&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
index 0ec46b969a75..1069e7012c9c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
@@ -79,6 +79,25 @@
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */
+ sound-name-prefix = "Speaker Amp";
+ };
+};
+
+&codec {
+ status = "okay";
+};
+
+&codec_analog {
+ cpvdd-supply = <&reg_eldo1>;
+ status = "okay";
+};
+
+&dai {
+ status = "okay";
};
&ehci1 {
@@ -92,8 +111,6 @@
*/
&i2c0 {
clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
status = "okay";
};
@@ -279,6 +296,29 @@
vcc-hdmi-supply = <&reg_dldo1>;
};
+&sound {
+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Headphone", "Headphone Jack",
+ "Microphone", "Headset Microphone",
+ "Microphone", "Internal Microphone",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Left DAC", "AIF1 Slot 0 Left",
+ "Right DAC", "AIF1 Slot 0 Right",
+ "AIF1 Slot 0 Left ADC", "Left ADC",
+ "AIF1 Slot 0 Right ADC", "Right ADC",
+ "Headphone Jack", "HP",
+ "Speaker Amp INL", "LINEOUT",
+ "Speaker Amp INR", "LINEOUT",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Internal Speaker", "Speaker Amp OUTR",
+ "Internal Microphone", "MBIAS",
+ "MIC1", "Internal Microphone",
+ "Headset Microphone", "HBIAS",
+ "MIC2", "Headset Microphone";
+ status = "okay";
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 8c5b521e6389..9cc9bdde81ac 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -611,6 +611,16 @@
function = "i2c1";
};
+ /omit-if-no-ref/
+ lcd_rgb666_pins: lcd-rgb666-pins {
+ pins = "PD0", "PD1", "PD2", "PD3", "PD4",
+ "PD5", "PD6", "PD7", "PD8", "PD9",
+ "PD10", "PD11", "PD12", "PD13",
+ "PD14", "PD15", "PD16", "PD17",
+ "PD18", "PD19", "PD20", "PD21";
+ function = "lcd0";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
@@ -730,6 +740,14 @@
status = "disabled";
};
+ lradc: lradc@1c21800 {
+ compatible = "allwinner,sun50i-a64-lradc",
+ "allwinner,sun8i-a83t-r-lradc";
+ reg = <0x01c21800 0x400>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2s0: i2s@1c22000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-i2s",
@@ -842,6 +860,8 @@
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -853,6 +873,8 @@
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
index 62409afbaf06..c924090331d0 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
@@ -55,8 +55,7 @@
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0>, <1300000 1>;
};
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
index 9887948d5c86..1c7dde84e54d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo-plus2.dts
@@ -104,8 +104,7 @@
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>;
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1100000 0>, <1300000 1>;
};
wifi_pwrseq: wifi_pwrseq {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 4802902e128f..189834518391 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -127,6 +127,12 @@
status = "okay";
};
+&pio {
+ vcc-pc-supply = <&reg_bldo2>;
+ vcc-pd-supply = <&reg_cldo1>;
+ vcc-pg-supply = <&reg_aldo1>;
+};
+
&r_i2c {
status = "okay";
@@ -243,10 +249,16 @@
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
};
};
+&r_pio {
+ vcc-pm-supply = <&reg_aldo1>;
+};
+
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 16c5c3d0fd81..7628a7c83096 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -203,11 +203,32 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h6-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <46>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
sid: sid@3006000 {
compatible = "allwinner,sun50i-h6-sid";
reg = <0x03006000 0x400>;
};
+ watchdog: watchdog@30090a0 {
+ compatible = "allwinner,sun50i-h6-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x030090a0 0x20>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ /* Broken on some H6 boards */
+ status = "disabled";
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
@@ -622,6 +643,13 @@
#reset-cells = <1>;
};
+ r_watchdog: watchdog@7020400 {
+ compatible = "allwinner,sun50i-h6-wdt",
+ "allwinner,sun6i-a31-wdt";
+ reg = <0x07020400 0x20>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
r_intc: interrupt-controller@7021000 {
compatible = "allwinner,sun50i-h6-r-intc",
"allwinner,sun6i-a31-r-intc";
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 4b0f674df849..b05d78164fc1 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -138,7 +138,7 @@
};
gmac0: ethernet@ff800000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff800000 0x2000>;
interrupts = <0 90 4>;
interrupt-names = "macirq";
@@ -156,7 +156,7 @@
};
gmac1: ethernet@ff802000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff802000 0x2000>;
interrupts = <0 91 4>;
interrupt-names = "macirq";
@@ -169,12 +169,12 @@
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 2>;
- altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+ altr,sysmgr-syscon = <&sysmgr 0x48 8>;
status = "disabled";
};
gmac2: ethernet@ff804000 {
- compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac";
+ compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
reg = <0xff804000 0x2000>;
interrupts = <0 92 4>;
interrupt-names = "macirq";
@@ -187,7 +187,7 @@
rx-fifo-depth = <16384>;
snps,multicast-filter-bins = <256>;
iommus = <&smmu 3>;
- altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+ altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index e129c03ced14..07b861fe5fa5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 75fe1a2c49d0..4cd2d5951822 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -482,8 +482,8 @@
/* emmc storage */
&sd_emmc_c {
- status = "disabled";
- pinctrl-0 = <&emmc_pins>;
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 34704fecf756..6219337033a0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -171,7 +171,9 @@
ranges;
ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
+ compatible = "amlogic,meson-axg-dwmac",
+ "snps,dwmac-3.70a",
+ "snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000
0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
@@ -299,7 +301,7 @@
};
emmc_pins: emmc {
- mux {
+ mux-0 {
groups = "emmc_nand_d0",
"emmc_nand_d1",
"emmc_nand_d2",
@@ -308,14 +310,26 @@
"emmc_nand_d5",
"emmc_nand_d6",
"emmc_nand_d7",
- "emmc_clk",
- "emmc_cmd",
- "emmc_ds";
+ "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "emmc_clk";
function = "emmc";
bias-disable;
};
};
+ emmc_ds_pins: emmc_ds {
+ mux {
+ groups = "emmc_ds";
+ function = "emmc";
+ bias-pull-down;
+ };
+ };
+
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
@@ -559,13 +573,18 @@
};
sdio_pins: sdio {
- mux {
+ mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
- "sdio_cmd",
- "sdio_clk";
+ "sdio_cmd";
+ function = "sdio";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "sdio_clk";
function = "sdio";
bias-disable;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index 34b40587e5ef..c7a87368850b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -9,15 +9,12 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "seirobotics,sei510", "amlogic,g12a";
model = "SEI Robotics SEI510";
- aliases {
- serial0 = &uart_AO;
- };
-
adc_keys {
compatible = "adc-keys";
io-channels = <&saradc 0>;
@@ -31,13 +28,25 @@
};
};
- ao_5v: regulator-ao_5v {
- compatible = "regulator-fixed";
- regulator-name = "AO_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_in>;
- regulator-always-on;
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = &ethmac;
+ };
+
+ mono_dac: audio-codec-0 {
+ compatible = "maxim,max98357a";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "U16";
+ sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
+ };
+
+ dmics: audio-codec-1 {
+ #sound-dai-cells = <0>;
+ compatible = "dmic-codec";
+ num-channels = <2>;
+ wakeup-delay-ms = <50>;
+ status = "okay";
+ sound-name-prefix = "MIC";
};
chosen {
@@ -54,21 +63,9 @@
};
};
- dc_in: regulator-dc_in {
- compatible = "regulator-fixed";
- regulator-name = "DC_IN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- emmc_1v8: regulator-emmc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "EMMC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
hdmi-connector {
@@ -87,12 +84,30 @@
reg = <0x0 0x0 0x0 0x40000000>;
};
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32@5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
+ ao_5v: regulator-ao_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "AO_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_in>;
+ regulator-always-on;
+ };
+
+ dc_in: regulator-dc_in {
+ compatible = "regulator-fixed";
+ regulator-name = "DC_IN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ emmc_1v8: regulator-emmc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "EMMC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
@@ -122,6 +137,146 @@
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
+
+ reserved-memory {
+ /* TEE Reserved Memory */
+ bl32_reserved: bl32@5000000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12A-SEI510";
+ audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
+ <&tdmin_a>, <&tdmin_b>;
+ audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+ "TDMOUT_A IN 1", "FRDDR_B OUT 0",
+ "TDMOUT_A IN 2", "FRDDR_C OUT 0",
+ "TDM_A Playback", "TDMOUT_A OUT",
+ "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "TODDR_A IN 4", "PDM Capture",
+ "TODDR_B IN 4", "PDM Capture",
+ "TODDR_C IN 4", "PDM Capture",
+ "TDMIN_A IN 0", "TDM_A Capture",
+ "TDMIN_A IN 3", "TDM_A Loopback",
+ "TDMIN_B IN 0", "TDM_A Capture",
+ "TDMIN_B IN 3", "TDM_A Loopback",
+ "TDMIN_A IN 1", "TDM_B Capture",
+ "TDMIN_A IN 4", "TDM_B Loopback",
+ "TDMIN_B IN 1", "TDM_B Capture",
+ "TDMIN_B IN 4", "TDM_B Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link-3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link-4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link-5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ /* internal speaker interface */
+ dai-link-6 {
+ sound-dai = <&tdmif_a>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&mono_dac>;
+ };
+
+ codec-1 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+ };
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-7 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec@0 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* internal digital mics */
+ dai-link-8 {
+ sound-dai = <&pdm>;
+
+ codec {
+ sound-dai = <&dmics>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-9 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
};
&cec_AO {
@@ -138,27 +293,32 @@
hdmi-phandle = <&hdmi_tx>;
};
+&clkc_audio {
+ status = "okay";
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
-&saradc {
+&ethmac {
status = "okay";
- vref-supply = <&vddio_ao1v8>;
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
};
-&uart_A {
+&frddr_a {
status = "okay";
- pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
- pinctrl-names = "default";
- uart-has-rtscts;
+};
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
- };
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
};
&hdmi_tx {
@@ -173,6 +333,163 @@
};
};
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
+&pdm {
+ pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+ <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+ <&pdm_dclk_z_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_ao1v8>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_a {
+ pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
+ <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>;
+ assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+ assigned-clock-rates = <0>, <0>;
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmout_a {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ vbat-supply = <&vddao_3v3>;
+ vddio-supply = <&vddio_ao1v8>;
+ };
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
index 0e8045b8a915..8551fbd4a488 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
@@ -15,14 +15,12 @@
aliases {
serial0 = &uart_AO;
+ ethernet0 = &ethmac;
};
+
chosen {
stdout-path = "serial0:115200n8";
};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
cvbs-connector {
compatible = "composite-video-connector";
@@ -34,13 +32,9 @@
};
};
- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
hdmi-connector {
@@ -54,6 +48,20 @@
};
};
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
@@ -62,6 +70,17 @@
regulator-always-on;
};
+ usb_pwr_en: regulator-usb_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
@@ -92,17 +111,6 @@
enable-active-high;
};
- usb_pwr_en: regulator-usb_pwr_en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
vddao_1v8: regulator-vddao_1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_1V8";
@@ -143,6 +151,12 @@
};
};
+&ethmac {
+ status = "okay";
+ phy-handle = <&internal_ephy>;
+ phy-mode = "rmii";
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -156,6 +170,70 @@
};
};
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+/* i2c Touch */
+&i2c0 {
+ status = "okay";
+ pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
+ pinctrl-names = "default";
+};
+
+/* i2c CM */
+&i2c2 {
+ status = "okay";
+ pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
+ pinctrl-names = "default";
+};
+
+/* i2c Audio */
+&i2c3 {
+ status = "okay";
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index b3d913f28f12..fe4013cca876 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -8,6 +8,7 @@
#include "meson-g12a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a";
@@ -15,7 +16,16 @@
aliases {
serial0 = &uart_AO;
+ ethernet0 = &ethmac;
};
+
+ spdif_dit: audio-codec-1 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
chosen {
stdout-path = "serial0:115200n8";
};
@@ -45,6 +55,18 @@
};
};
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
flash_1v8: regulator-flash_1v8 {
compatible = "regulator-fixed";
regulator-name = "FLASH_1V8";
@@ -109,6 +131,97 @@
vin-supply = <&dc_in>;
regulator-always-on;
};
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12A-X96-MAX";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* spdif hdmi or toslink interface */
+ dai-link-4 {
+ sound-dai = <&spdifout>;
+
+ codec-0 {
+ sound-dai = <&spdif_dit>;
+ };
+
+ codec-1 {
+ sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+ };
+ };
+
+ /* spdif hdmi interface */
+ dai-link-5 {
+ sound-dai = <&spdifout_b>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-6 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+};
+
+&arb {
+ status = "okay";
};
&cec_AO {
@@ -125,12 +238,28 @@
hdmi-phandle = <&hdmi_tx>;
};
+&clkc_audio {
+ status = "okay";
+};
+
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
@@ -144,6 +273,46 @@
};
};
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+ eee-broken-1000t;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ethmac {
+ pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+};
+
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
@@ -153,6 +322,9 @@
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
};
};
@@ -166,3 +338,88 @@
status = "okay";
dr_mode = "host";
};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_1v8>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+&spdifout {
+ pinctrl-0 = <&spdif_out_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spdifout_b {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 9f72396ba710..f8d43e3dcf20 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -5,10 +5,12 @@
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/clock/g12a-clkc.h>
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
/ {
@@ -18,6 +20,39 @@
#address-cells = <2>;
#size-cells = <2>;
+ tdmif_a: audio-controller-0 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_A";
+ clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
+
+ tdmif_b: audio-controller-1 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_B";
+ clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
+
+ tdmif_c: audio-controller-2 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_C";
+ clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
+
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
@@ -102,6 +137,27 @@
#size-cells = <2>;
ranges;
+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic,meson-axg-dwmac",
+ "snps,dwmac-3.70a",
+ "snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ status = "disabled";
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+ };
+
apb: bus@ff600000 {
compatible = "simple-bus";
reg = <0x0 0xff600000 0x0 0x200000>;
@@ -123,6 +179,7 @@
clock-names = "isfr", "iahb", "venci";
#address-cells = <1>;
#size-cells = <0>;
+ #sound-dai-cells = <0>;
status = "disabled";
/* VPU VENC Input */
@@ -140,6 +197,19 @@
};
};
+ apb_efuse: bus@30000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x30000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>;
+
+ hwrng: rng@218 {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x218 0x0 0x4>;
+ };
+ };
+
periphs: bus@34400 {
compatible = "simple-bus";
reg = <0x0 0x34400 0x0 0x400>;
@@ -185,12 +255,55 @@
};
};
+ emmc_pins: emmc {
+ mux-0 {
+ groups = "emmc_nand_d0",
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+
+ mux-1 {
+ groups = "emmc_clk";
+ function = "emmc";
+ bias-disable;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_ds_pins: emmc-ds {
+ mux {
+ groups = "emmc_nand_ds";
+ function = "emmc";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ emmc_clk_gate_pins: emmc_clk_gate {
+ mux {
+ groups = "BOOT_8";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
hdmitx_ddc_pins: hdmitx_ddc {
mux {
groups = "hdmitx_sda",
"hdmitx_sck";
function = "hdmitx";
bias-disable;
+ drive-strength-microamp = <4000>;
};
};
@@ -202,6 +315,1040 @@
};
};
+
+ i2c0_sda_c_pins: i2c0-sda-c {
+ mux {
+ groups = "i2c0_sda_c";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+
+ };
+ };
+
+ i2c0_sck_c_pins: i2c0-sck-c {
+ mux {
+ groups = "i2c0_sck_c";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c0_sda_z0_pins: i2c0-sda-z0 {
+ mux {
+ groups = "i2c0_sda_z0";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c0_sck_z1_pins: i2c0-sck-z1 {
+ mux {
+ groups = "i2c0_sck_z1";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c0_sda_z7_pins: i2c0-sda-z7 {
+ mux {
+ groups = "i2c0_sda_z7";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c0_sda_z8_pins: i2c0-sda-z8 {
+ mux {
+ groups = "i2c0_sda_z8";
+ function = "i2c0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_sda_x_pins: i2c1-sda-x {
+ mux {
+ groups = "i2c1_sda_x";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_sck_x_pins: i2c1-sck-x {
+ mux {
+ groups = "i2c1_sck_x";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_sda_h2_pins: i2c1-sda-h2 {
+ mux {
+ groups = "i2c1_sda_h2";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_sck_h3_pins: i2c1-sck-h3 {
+ mux {
+ groups = "i2c1_sck_h3";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_sda_h6_pins: i2c1-sda-h6 {
+ mux {
+ groups = "i2c1_sda_h6";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c1_sck_h7_pins: i2c1-sck-h7 {
+ mux {
+ groups = "i2c1_sck_h7";
+ function = "i2c1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_sda_x_pins: i2c2-sda-x {
+ mux {
+ groups = "i2c2_sda_x";
+ function = "i2c2";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_sck_x_pins: i2c2-sck-x {
+ mux {
+ groups = "i2c2_sck_x";
+ function = "i2c2";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_sda_z_pins: i2c2-sda-z {
+ mux {
+ groups = "i2c2_sda_z";
+ function = "i2c2";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c2_sck_z_pins: i2c2-sck-z {
+ mux {
+ groups = "i2c2_sck_z";
+ function = "i2c2";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_sda_h_pins: i2c3-sda-h {
+ mux {
+ groups = "i2c3_sda_h";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_sck_h_pins: i2c3-sck-h {
+ mux {
+ groups = "i2c3_sck_h";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_sda_a_pins: i2c3-sda-a {
+ mux {
+ groups = "i2c3_sda_a";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c3_sck_a_pins: i2c3-sck-a {
+ mux {
+ groups = "i2c3_sck_a";
+ function = "i2c3";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ mclk0_a_pins: mclk0-a {
+ mux {
+ groups = "mclk0_a";
+ function = "mclk0";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ mclk1_a_pins: mclk1-a {
+ mux {
+ groups = "mclk1_a";
+ function = "mclk1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ mclk1_x_pins: mclk1-x {
+ mux {
+ groups = "mclk1_x";
+ function = "mclk1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ mclk1_z_pins: mclk1-z {
+ mux {
+ groups = "mclk1_z";
+ function = "mclk1";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ pdm_din0_a_pins: pdm-din0-a {
+ mux {
+ groups = "pdm_din0_a";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din0_c_pins: pdm-din0-c {
+ mux {
+ groups = "pdm_din0_c";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din0_x_pins: pdm-din0-x {
+ mux {
+ groups = "pdm_din0_x";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din0_z_pins: pdm-din0-z {
+ mux {
+ groups = "pdm_din0_z";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din1_a_pins: pdm-din1-a {
+ mux {
+ groups = "pdm_din1_a";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din1_c_pins: pdm-din1-c {
+ mux {
+ groups = "pdm_din1_c";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din1_x_pins: pdm-din1-x {
+ mux {
+ groups = "pdm_din1_x";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din1_z_pins: pdm-din1-z {
+ mux {
+ groups = "pdm_din1_z";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din2_a_pins: pdm-din2-a {
+ mux {
+ groups = "pdm_din2_a";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din2_c_pins: pdm-din2-c {
+ mux {
+ groups = "pdm_din2_c";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din2_x_pins: pdm-din2-x {
+ mux {
+ groups = "pdm_din2_x";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din2_z_pins: pdm-din2-z {
+ mux {
+ groups = "pdm_din2_z";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din3_a_pins: pdm-din3-a {
+ mux {
+ groups = "pdm_din3_a";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din3_c_pins: pdm-din3-c {
+ mux {
+ groups = "pdm_din3_c";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din3_x_pins: pdm-din3-x {
+ mux {
+ groups = "pdm_din3_x";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_din3_z_pins: pdm-din3-z {
+ mux {
+ groups = "pdm_din3_z";
+ function = "pdm";
+ bias-disable;
+ };
+ };
+
+ pdm_dclk_a_pins: pdm-dclk-a {
+ mux {
+ groups = "pdm_dclk_a";
+ function = "pdm";
+ bias-disable;
+ drive-strength-microamp = <500>;
+ };
+ };
+
+ pdm_dclk_c_pins: pdm-dclk-c {
+ mux {
+ groups = "pdm_dclk_c";
+ function = "pdm";
+ bias-disable;
+ drive-strength-microamp = <500>;
+ };
+ };
+
+ pdm_dclk_x_pins: pdm-dclk-x {
+ mux {
+ groups = "pdm_dclk_x";
+ function = "pdm";
+ bias-disable;
+ drive-strength-microamp = <500>;
+ };
+ };
+
+ pdm_dclk_z_pins: pdm-dclk-z {
+ mux {
+ groups = "pdm_dclk_z";
+ function = "pdm";
+ bias-disable;
+ drive-strength-microamp = <500>;
+ };
+ };
+
+ pwm_a_pins: pwm-a {
+ mux {
+ groups = "pwm_a";
+ function = "pwm_a";
+ bias-disable;
+ };
+ };
+
+ pwm_b_x7_pins: pwm-b-x7 {
+ mux {
+ groups = "pwm_b_x7";
+ function = "pwm_b";
+ bias-disable;
+ };
+ };
+
+ pwm_b_x19_pins: pwm-b-x19 {
+ mux {
+ groups = "pwm_b_x19";
+ function = "pwm_b";
+ bias-disable;
+ };
+ };
+
+ pwm_c_c_pins: pwm-c-c {
+ mux {
+ groups = "pwm_c_c";
+ function = "pwm_c";
+ bias-disable;
+ };
+ };
+
+ pwm_c_x5_pins: pwm-c-x5 {
+ mux {
+ groups = "pwm_c_x5";
+ function = "pwm_c";
+ bias-disable;
+ };
+ };
+
+ pwm_c_x8_pins: pwm-c-x8 {
+ mux {
+ groups = "pwm_c_x8";
+ function = "pwm_c";
+ bias-disable;
+ };
+ };
+
+ pwm_d_x3_pins: pwm-d-x3 {
+ mux {
+ groups = "pwm_d_x3";
+ function = "pwm_d";
+ bias-disable;
+ };
+ };
+
+ pwm_d_x6_pins: pwm-d-x6 {
+ mux {
+ groups = "pwm_d_x6";
+ function = "pwm_d";
+ bias-disable;
+ };
+ };
+
+ pwm_e_pins: pwm-e {
+ mux {
+ groups = "pwm_e";
+ function = "pwm_e";
+ bias-disable;
+ };
+ };
+
+ pwm_f_x_pins: pwm-f-x {
+ mux {
+ groups = "pwm_f_x";
+ function = "pwm_f";
+ bias-disable;
+ };
+ };
+
+ pwm_f_h_pins: pwm-f-h {
+ mux {
+ groups = "pwm_f_h";
+ function = "pwm_f";
+ bias-disable;
+ };
+ };
+
+ sdcard_c_pins: sdcard_c {
+ mux-0 {
+ groups = "sdcard_d0_c",
+ "sdcard_d1_c",
+ "sdcard_d2_c",
+ "sdcard_d3_c",
+ "sdcard_cmd_c";
+ function = "sdcard";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+
+ mux-1 {
+ groups = "sdcard_clk_c";
+ function = "sdcard";
+ bias-disable;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdcard_clk_gate_c_pins: sdcard_clk_gate_c {
+ mux {
+ groups = "GPIOC_4";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdcard_z_pins: sdcard_z {
+ mux-0 {
+ groups = "sdcard_d0_z",
+ "sdcard_d1_z",
+ "sdcard_d2_z",
+ "sdcard_d3_z",
+ "sdcard_cmd_z";
+ function = "sdcard";
+ bias-pull-up;
+ drive-strength-microamp = <4000>;
+ };
+
+ mux-1 {
+ groups = "sdcard_clk_z";
+ function = "sdcard";
+ bias-disable;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdcard_clk_gate_z_pins: sdcard_clk_gate_z {
+ mux {
+ groups = "GPIOZ_6";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_clk",
+ "sdio_cmd";
+ function = "sdio";
+ bias-disable;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ sdio_clk_gate_pins: sdio_clk_gate {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ bias-pull-down;
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ spdif_in_a10_pins: spdif-in-a10 {
+ mux {
+ groups = "spdif_in_a10";
+ function = "spdif_in";
+ bias-disable;
+ };
+ };
+
+ spdif_in_a12_pins: spdif-in-a12 {
+ mux {
+ groups = "spdif_in_a12";
+ function = "spdif_in";
+ bias-disable;
+ };
+ };
+
+ spdif_in_h_pins: spdif-in-h {
+ mux {
+ groups = "spdif_in_h";
+ function = "spdif_in";
+ bias-disable;
+ };
+ };
+
+ spdif_out_h_pins: spdif-out-h {
+ mux {
+ groups = "spdif_out_h";
+ function = "spdif_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
+ spdif_out_a11_pins: spdif-out-a11 {
+ mux {
+ groups = "spdif_out_a11";
+ function = "spdif_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
+ spdif_out_a13_pins: spdif-out-a13 {
+ mux {
+ groups = "spdif_out_a13";
+ function = "spdif_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
+ tdm_a_din0_pins: tdm-a-din0 {
+ mux {
+ groups = "tdm_a_din0";
+ function = "tdm_a";
+ bias-disable;
+ };
+ };
+
+
+ tdm_a_din1_pins: tdm-a-din1 {
+ mux {
+ groups = "tdm_a_din1";
+ function = "tdm_a";
+ bias-disable;
+ };
+ };
+
+ tdm_a_dout0_pins: tdm-a-dout0 {
+ mux {
+ groups = "tdm_a_dout0";
+ function = "tdm_a";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_a_dout1_pins: tdm-a-dout1 {
+ mux {
+ groups = "tdm_a_dout1";
+ function = "tdm_a";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_a_fs_pins: tdm-a-fs {
+ mux {
+ groups = "tdm_a_fs";
+ function = "tdm_a";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_a_sclk_pins: tdm-a-sclk {
+ mux {
+ groups = "tdm_a_sclk";
+ function = "tdm_a";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_a_slv_fs_pins: tdm-a-slv-fs {
+ mux {
+ groups = "tdm_a_slv_fs";
+ function = "tdm_a";
+ bias-disable;
+ };
+ };
+
+
+ tdm_a_slv_sclk_pins: tdm-a-slv-sclk {
+ mux {
+ groups = "tdm_a_slv_sclk";
+ function = "tdm_a";
+ bias-disable;
+ };
+ };
+
+ tdm_b_din0_pins: tdm-b-din0 {
+ mux {
+ groups = "tdm_b_din0";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_b_din1_pins: tdm-b-din1 {
+ mux {
+ groups = "tdm_b_din1";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_b_din2_pins: tdm-b-din2 {
+ mux {
+ groups = "tdm_b_din2";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_b_din3_a_pins: tdm-b-din3-a {
+ mux {
+ groups = "tdm_b_din3_a";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_b_din3_h_pins: tdm-b-din3-h {
+ mux {
+ groups = "tdm_b_din3_h";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_b_dout0_pins: tdm-b-dout0 {
+ mux {
+ groups = "tdm_b_dout0";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_dout1_pins: tdm-b-dout1 {
+ mux {
+ groups = "tdm_b_dout1";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_dout2_pins: tdm-b-dout2 {
+ mux {
+ groups = "tdm_b_dout2";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_dout3_a_pins: tdm-b-dout3-a {
+ mux {
+ groups = "tdm_b_dout3_a";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_dout3_h_pins: tdm-b-dout3-h {
+ mux {
+ groups = "tdm_b_dout3_h";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_fs_pins: tdm-b-fs {
+ mux {
+ groups = "tdm_b_fs";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_sclk_pins: tdm-b-sclk {
+ mux {
+ groups = "tdm_b_sclk";
+ function = "tdm_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_b_slv_fs_pins: tdm-b-slv-fs {
+ mux {
+ groups = "tdm_b_slv_fs";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_b_slv_sclk_pins: tdm-b-slv-sclk {
+ mux {
+ groups = "tdm_b_slv_sclk";
+ function = "tdm_b";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din0_a_pins: tdm-c-din0-a {
+ mux {
+ groups = "tdm_c_din0_a";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din0_z_pins: tdm-c-din0-z {
+ mux {
+ groups = "tdm_c_din0_z";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din1_a_pins: tdm-c-din1-a {
+ mux {
+ groups = "tdm_c_din1_a";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din1_z_pins: tdm-c-din1-z {
+ mux {
+ groups = "tdm_c_din1_z";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din2_a_pins: tdm-c-din2-a {
+ mux {
+ groups = "tdm_c_din2_a";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ eth_leds_pins: eth-leds {
+ mux {
+ groups = "eth_link_led",
+ "eth_act_led";
+ function = "eth";
+ bias-disable;
+ };
+ };
+
+ eth_pins: eth {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_rgmii_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_txen",
+ "eth_txd0",
+ "eth_txd1";
+ function = "eth";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ eth_rgmii_pins: eth-rgmii {
+ mux {
+ groups = "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ tdm_c_din2_z_pins: tdm-c-din2-z {
+ mux {
+ groups = "tdm_c_din2_z";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din3_a_pins: tdm-c-din3-a {
+ mux {
+ groups = "tdm_c_din3_a";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_din3_z_pins: tdm-c-din3-z {
+ mux {
+ groups = "tdm_c_din3_z";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_dout0_a_pins: tdm-c-dout0-a {
+ mux {
+ groups = "tdm_c_dout0_a";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout0_z_pins: tdm-c-dout0-z {
+ mux {
+ groups = "tdm_c_dout0_z";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout1_a_pins: tdm-c-dout1-a {
+ mux {
+ groups = "tdm_c_dout1_a";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout1_z_pins: tdm-c-dout1-z {
+ mux {
+ groups = "tdm_c_dout1_z";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout2_a_pins: tdm-c-dout2-a {
+ mux {
+ groups = "tdm_c_dout2_a";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout2_z_pins: tdm-c-dout2-z {
+ mux {
+ groups = "tdm_c_dout2_z";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout3_a_pins: tdm-c-dout3-a {
+ mux {
+ groups = "tdm_c_dout3_a";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_dout3_z_pins: tdm-c-dout3-z {
+ mux {
+ groups = "tdm_c_dout3_z";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_fs_a_pins: tdm-c-fs-a {
+ mux {
+ groups = "tdm_c_fs_a";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_fs_z_pins: tdm-c-fs-z {
+ mux {
+ groups = "tdm_c_fs_z";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_sclk_a_pins: tdm-c-sclk-a {
+ mux {
+ groups = "tdm_c_sclk_a";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_sclk_z_pins: tdm-c-sclk-z {
+ mux {
+ groups = "tdm_c_sclk_z";
+ function = "tdm_c";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a {
+ mux {
+ groups = "tdm_c_slv_fs_a";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z {
+ mux {
+ groups = "tdm_c_slv_fs_z";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a {
+ mux {
+ groups = "tdm_c_slv_sclk_a";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
+ tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z {
+ mux {
+ groups = "tdm_c_slv_sclk_z";
+ function = "tdm_c";
+ bias-disable;
+ };
+ };
+
uart_a_pins: uart-a {
mux {
groups = "uart_a_tx",
@@ -303,6 +1450,282 @@
};
};
+ pdm: audio-controller@40000 {
+ compatible = "amlogic,g12a-pdm",
+ "amlogic,axg-pdm";
+ reg = <0x0 0x40000 0x0 0x34>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PDM";
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ status = "disabled";
+ };
+
+ audio: bus@42000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x42000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>;
+
+ clkc_audio: clock-controller@0 {
+ status = "disabled";
+ compatible = "amlogic,g12a-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7";
+
+ resets = <&reset RESET_AUDIO>;
+ };
+
+ toddr_a: audio-controller@100 {
+ compatible = "amlogic,g12a-toddr",
+ "amlogic,axg-toddr";
+ reg = <0x0 0x100 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_A";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+ resets = <&arb AXG_ARB_TODDR_A>;
+ status = "disabled";
+ };
+
+ toddr_b: audio-controller@140 {
+ compatible = "amlogic,g12a-toddr",
+ "amlogic,axg-toddr";
+ reg = <0x0 0x140 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_B";
+ interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+ resets = <&arb AXG_ARB_TODDR_B>;
+ status = "disabled";
+ };
+
+ toddr_c: audio-controller@180 {
+ compatible = "amlogic,g12a-toddr",
+ "amlogic,axg-toddr";
+ reg = <0x0 0x180 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_C";
+ interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+ resets = <&arb AXG_ARB_TODDR_C>;
+ status = "disabled";
+ };
+
+ frddr_a: audio-controller@1c0 {
+ compatible = "amlogic,g12a-frddr",
+ "amlogic,axg-frddr";
+ reg = <0x0 0x1c0 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_A";
+ interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ resets = <&arb AXG_ARB_FRDDR_A>;
+ status = "disabled";
+ };
+
+ frddr_b: audio-controller@200 {
+ compatible = "amlogic,g12a-frddr",
+ "amlogic,axg-frddr";
+ reg = <0x0 0x200 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_B";
+ interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+ resets = <&arb AXG_ARB_FRDDR_B>;
+ status = "disabled";
+ };
+
+ frddr_c: audio-controller@240 {
+ compatible = "amlogic,g12a-frddr",
+ "amlogic,axg-frddr";
+ reg = <0x0 0x240 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_C";
+ interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+ resets = <&arb AXG_ARB_FRDDR_C>;
+ status = "disabled";
+ };
+
+ arb: reset-controller@280 {
+ status = "disabled";
+ compatible = "amlogic,meson-axg-audio-arb";
+ reg = <0x0 0x280 0x0 0x4>;
+ #reset-cells = <1>;
+ clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+ };
+
+ tdmin_a: audio-controller@300 {
+ compatible = "amlogic,g12a-tdmin",
+ "amlogic,axg-tdmin";
+ reg = <0x0 0x300 0x0 0x40>;
+ sound-name-prefix = "TDMIN_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_b: audio-controller@340 {
+ compatible = "amlogic,g12a-tdmin",
+ "amlogic,axg-tdmin";
+ reg = <0x0 0x340 0x0 0x40>;
+ sound-name-prefix = "TDMIN_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_c: audio-controller@380 {
+ compatible = "amlogic,g12a-tdmin",
+ "amlogic,axg-tdmin";
+ reg = <0x0 0x380 0x0 0x40>;
+ sound-name-prefix = "TDMIN_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_lb: audio-controller@3c0 {
+ compatible = "amlogic,g12a-tdmin",
+ "amlogic,axg-tdmin";
+ reg = <0x0 0x3c0 0x0 0x40>;
+ sound-name-prefix = "TDMIN_LB";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ spdifin: audio-controller@400 {
+ compatible = "amlogic,g12a-spdifin",
+ "amlogic,axg-spdifin";
+ reg = <0x0 0x400 0x0 0x30>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFIN";
+ interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+ <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+ clock-names = "pclk", "refclk";
+ status = "disabled";
+ };
+
+ spdifout: audio-controller@480 {
+ compatible = "amlogic,g12a-spdifout",
+ "amlogic,axg-spdifout";
+ reg = <0x0 0x480 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
+
+ tdmout_a: audio-controller@500 {
+ compatible = "amlogic,g12a-tdmout";
+ reg = <0x0 0x500 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmout_b: audio-controller@540 {
+ compatible = "amlogic,g12a-tdmout";
+ reg = <0x0 0x540 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmout_c: audio-controller@580 {
+ compatible = "amlogic,g12a-tdmout";
+ reg = <0x0 0x580 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ spdifout_b: audio-controller@680 {
+ compatible = "amlogic,g12a-spdifout",
+ "amlogic,axg-spdifout";
+ reg = <0x0 0x680 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT_B";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
+
+ tohdmitx: audio-controller@744 {
+ compatible = "amlogic,g12a-tohdmitx";
+ reg = <0x0 0x744 0x0 0x4>;
+ #sound-dai-cells = <1>;
+ sound-name-prefix = "TOHDMITX";
+ status = "disabled";
+ };
+ };
+
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
@@ -314,6 +1737,38 @@
assigned-clock-rates = <100000000>;
#phy-cells = <1>;
};
+
+ eth_phy: mdio-multiplexer@4c000 {
+ compatible = "amlogic,g12a-mdio-mux";
+ reg = <0x0 0x4c000 0x0 0xa4>;
+ clocks = <&clkc CLKID_ETH_PHY>,
+ <&xtal>,
+ <&clkc CLKID_MPLL_50M>;
+ clock-names = "pclk", "clkin0", "clkin1";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ext_mdio: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ int_mdio: mdio@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ internal_ephy: ethernet_phy@8 {
+ compatible = "ethernet-phy-id0180.3301",
+ "ethernet-phy-ieee802.3-c22";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <8>;
+ max-speed = <100>;
+ };
+ };
+ };
};
aobus: bus@ff800000 {
@@ -401,6 +1856,145 @@
gpio-ranges = <&ao_pinctrl 0 0 15>;
};
+ i2c_ao_sck_pins: i2c_ao_sck_pins {
+ mux {
+ groups = "i2c_ao_sck";
+ function = "i2c_ao";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c_ao_sda_pins: i2c_ao_sda {
+ mux {
+ groups = "i2c_ao_sda";
+ function = "i2c_ao";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c_ao_sck_e_pins: i2c_ao_sck_e {
+ mux {
+ groups = "i2c_ao_sck_e";
+ function = "i2c_ao";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ i2c_ao_sda_e_pins: i2c_ao_sda_e {
+ mux {
+ groups = "i2c_ao_sda_e";
+ function = "i2c_ao";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ mclk0_ao_pins: mclk0-ao {
+ mux {
+ groups = "mclk0_ao";
+ function = "mclk0_ao";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_ao_b_din0_pins: tdm-ao-b-din0 {
+ mux {
+ groups = "tdm_ao_b_din0";
+ function = "tdm_ao_b";
+ bias-disable;
+ };
+ };
+
+ spdif_ao_out_pins: spdif-ao-out {
+ mux {
+ groups = "spdif_ao_out";
+ function = "spdif_ao_out";
+ drive-strength-microamp = <500>;
+ bias-disable;
+ };
+ };
+
+ tdm_ao_b_din1_pins: tdm-ao-b-din1 {
+ mux {
+ groups = "tdm_ao_b_din1";
+ function = "tdm_ao_b";
+ bias-disable;
+ };
+ };
+
+ tdm_ao_b_din2_pins: tdm-ao-b-din2 {
+ mux {
+ groups = "tdm_ao_b_din2";
+ function = "tdm_ao_b";
+ bias-disable;
+ };
+ };
+
+ tdm_ao_b_dout0_pins: tdm-ao-b-dout0 {
+ mux {
+ groups = "tdm_ao_b_dout0";
+ function = "tdm_ao_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_ao_b_dout1_pins: tdm-ao-b-dout1 {
+ mux {
+ groups = "tdm_ao_b_dout1";
+ function = "tdm_ao_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_ao_b_dout2_pins: tdm-ao-b-dout2 {
+ mux {
+ groups = "tdm_ao_b_dout2";
+ function = "tdm_ao_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_ao_b_fs_pins: tdm-ao-b-fs {
+ mux {
+ groups = "tdm_ao_b_fs";
+ function = "tdm_ao_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_ao_b_sclk_pins: tdm-ao-b-sclk {
+ mux {
+ groups = "tdm_ao_b_sclk";
+ function = "tdm_ao_b";
+ bias-disable;
+ drive-strength-microamp = <3000>;
+ };
+ };
+
+ tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs {
+ mux {
+ groups = "tdm_ao_b_slv_fs";
+ function = "tdm_ao_b";
+ bias-disable;
+ };
+ };
+
+ tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk {
+ mux {
+ groups = "tdm_ao_b_slv_sclk";
+ function = "tdm_ao_b";
+ bias-disable;
+ };
+ };
+
uart_ao_a_pins: uart-a-ao {
mux {
groups = "uart_ao_a_tx",
@@ -418,6 +2012,69 @@
bias-disable;
};
};
+
+ pwm_ao_a_pins: pwm-ao-a {
+ mux {
+ groups = "pwm_ao_a";
+ function = "pwm_ao_a";
+ bias-disable;
+ };
+ };
+
+ pwm_ao_b_pins: pwm-ao-b {
+ mux {
+ groups = "pwm_ao_b";
+ function = "pwm_ao_b";
+ bias-disable;
+ };
+ };
+
+ pwm_ao_c_4_pins: pwm-ao-c-4 {
+ mux {
+ groups = "pwm_ao_c_4";
+ function = "pwm_ao_c";
+ bias-disable;
+ };
+ };
+
+ pwm_ao_c_6_pins: pwm-ao-c-6 {
+ mux {
+ groups = "pwm_ao_c_6";
+ function = "pwm_ao_c";
+ bias-disable;
+ };
+ };
+
+ pwm_ao_d_5_pins: pwm-ao-d-5 {
+ mux {
+ groups = "pwm_ao_d_5";
+ function = "pwm_ao_d";
+ bias-disable;
+ };
+ };
+
+ pwm_ao_d_10_pins: pwm-ao-d-10 {
+ mux {
+ groups = "pwm_ao_d_10";
+ function = "pwm_ao_d";
+ bias-disable;
+ };
+ };
+
+ pwm_ao_d_e_pins: pwm-ao-d-e {
+ mux {
+ groups = "pwm_ao_d_e";
+ function = "pwm_ao_d";
+ };
+ };
+
+ remote_input_ao_pins: remote-input-ao {
+ mux {
+ groups = "remote_ao_input";
+ function = "remote_ao_input";
+ bias-disable;
+ };
+ };
};
};
@@ -445,12 +2102,19 @@
status = "disabled";
};
+ pwm_AO_cd: pwm@2000 {
+ compatible = "amlogic,meson-g12a-ao-pwm-cd";
+ reg = <0x0 0x2000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
@@ -460,11 +2124,35 @@
"amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
+ clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
+ i2c_AO: i2c@5000 {
+ compatible = "amlogic,meson-axg-i2c";
+ status = "disabled";
+ reg = <0x0 0x05000 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ };
+
+ pwm_AO_ab: pwm@7000 {
+ compatible = "amlogic,meson-g12a-ao-pwm-ab";
+ reg = <0x0 0x7000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ ir: ir@8000 {
+ compatible = "amlogic,meson-gxbb-ir";
+ reg = <0x0 0x8000 0x0 0x20>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
+
saradc: adc@9000 {
compatible = "amlogic,meson-g12a-saradc",
"amlogic,meson-saradc";
@@ -533,6 +2221,76 @@
#reset-cells = <1>;
};
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-g12a-gpio-intc",
+ "amlogic,meson-gpio-intc";
+ reg = <0x0 0xf080 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ };
+
+ pwm_ef: pwm@19000 {
+ compatible = "amlogic,meson-g12a-ee-pwm";
+ reg = <0x0 0x19000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@1a000 {
+ compatible = "amlogic,meson-g12a-ee-pwm";
+ reg = <0x0 0x1a000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_ab: pwm@1b000 {
+ compatible = "amlogic,meson-g12a-ee-pwm";
+ reg = <0x0 0x1b000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1c000 {
+ compatible = "amlogic,meson-axg-i2c";
+ status = "disabled";
+ reg = <0x0 0x1c000 0x0 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ };
+
+ i2c2: i2c@1d000 {
+ compatible = "amlogic,meson-axg-i2c";
+ status = "disabled";
+ reg = <0x0 0x1d000 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ };
+
+ i2c1: i2c@1e000 {
+ compatible = "amlogic,meson-axg-i2c";
+ status = "disabled";
+ reg = <0x0 0x1e000 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ };
+
+ i2c0: i2c@1f000 {
+ compatible = "amlogic,meson-axg-i2c";
+ status = "disabled";
+ reg = <0x0 0x1f000 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ };
+
clk_msr: clock-measure@18000 {
compatible = "amlogic,meson-g12a-clk-measure";
reg = <0x0 0x18000 0x0 0x10>;
@@ -566,6 +2324,43 @@
};
};
+ sd_emmc_a: sd@ffe03000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0xffe03000 0x0 0x800>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_A>,
+ <&clkc CLKID_SD_EMMC_A_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_A>;
+ amlogic,dram-access-quirk;
+ };
+
+ sd_emmc_b: sd@ffe05000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0xffe05000 0x0 0x800>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
+ };
+
+ sd_emmc_c: mmc@ffe07000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0xffe07000 0x0 0x800>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
+ };
+
usb: usb@ffe09000 {
status = "disabled";
compatible = "amlogic,meson-g12a-usb-ctrl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
new file mode 100644
index 000000000000..81780ffcc7f0
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "hardkernel,odroid-n2", "amlogic,g12b";
+ model = "Hardkernel ODROID-N2";
+
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = &ethmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "n2:blue";
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ tflash_vdd: regulator-tflash_vdd {
+ compatible = "regulator-fixed";
+
+ regulator-name = "TFLASH_VDD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ tf_io: gpio-regulator-tf_io {
+ compatible = "regulator-gpio";
+
+ regulator-name = "TF_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+ gpios-states = <0>;
+
+ states = <3300000 0
+ 1800000 1>;
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ main_12v: regulator-main_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&main_12v>;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ hub_5v: regulator-hub_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "HUB_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to the Hub CHIPENABLE, LOW sets low power state */
+ gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb_pwr_en: regulator-usb_pwr_en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to the microUSB port power enable */
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddao_1v8: regulator-vddao_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12A-ODROIDN2";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ethmac {
+ pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&gpio {
+ /*
+ * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
+ * to be turned high in order to be detected by the USB Controller
+ * This signal should be handled by a USB specific power sequence
+ * in order to reset the Hub when USB bus is powered down.
+ */
+ usb-hub {
+ gpio-hog;
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "usb-hub-reset";
+ };
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&tflash_vdd>;
+ vqmmc-supply = <&tf_io>;
+
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+ phy-supply = <&vcc_5v>;
+};
+
+&usb2_phy1 {
+ /* Enable the hub which is connected to this port */
+ phy-supply = <&hub_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
new file mode 100644
index 000000000000..9e88e513b22d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "amlogic,g12b";
+
+ cpus {
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu100>;
+ };
+
+ core1 {
+ cpu = <&cpu101>;
+ };
+
+ core2 {
+ cpu = <&cpu102>;
+ };
+
+ core3 {
+ cpu = <&cpu103>;
+ };
+ };
+ };
+
+ /delete-node/ cpu@2;
+ /delete-node/ cpu@3;
+
+ cpu100: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu101: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu102: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu103: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+ };
+};
+
+&clkc {
+ compatible = "amlogic,g12b-clkc";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
index 016641a41694..a9b778571cf5 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@@ -164,7 +164,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -184,7 +184,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6772709b9e19..74d03fc706be 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -486,7 +486,9 @@
};
ethmac: ethernet@c9410000 {
- compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ compatible = "amlogic,meson-gxbb-dwmac",
+ "snps,dwmac-3.70a",
+ "snps,dwmac";
reg = <0x0 0xc9410000 0x0 0x10000
0x0 0xc8834540 0x0 0x4>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index ade2ee09ae96..c34c1c90ccb6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -154,10 +154,6 @@
amlogic,tx-delay-ns = <2>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -166,6 +162,11 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
@@ -273,7 +274,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <200000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -301,8 +302,8 @@
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
- sd-uhs-sdr104;
- max-frequency = <200000000>;
+ sd-uhs-ddr50;
+ max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
index 25105ac96d55..b636912a2715 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@@ -162,10 +162,6 @@
phy-handle = <&eth_phy0>;
phy-mode = "rmii";
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -174,6 +170,10 @@
eth_phy0: ethernet-phy@0 {
/* IC Plus IP101GR (0x02430c54) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
};
};
};
@@ -235,7 +235,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 1cc9dc68ef00..9972b1515da6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -126,10 +126,6 @@
phy-handle = <&eth_phy0>;
phy-mode = "rgmii";
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
amlogic,tx-delay-ns = <2>;
mdio {
@@ -140,6 +136,11 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
@@ -255,6 +256,10 @@
bus-width = <4>;
cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
max-frequency = <100000000>;
disable-wp;
@@ -272,7 +277,7 @@
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
- max-frequency = <100000000>;
+ max-frequency = <200000000>;
non-removable;
disable-wp;
cap-mmc-highspeed;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 9d2406a7c4fa..3c93d1898b40 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -68,10 +68,6 @@
amlogic,tx-delay-ns = <2>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -80,6 +76,11 @@
eth_phy0: ethernet-phy@3 {
/* Micrel KSZ9031 (0x00221620) */
reg = <3>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
index 0be0f2a5d2fe..e8f925871edf 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@@ -165,7 +165,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index ad4d50bd9d77..43b11e3dfe11 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -28,10 +28,10 @@
};
};
- usb_vbus: regulator-usb0-vbus {
+ usb_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
- regulator-name = "USB0_VBUS";
+ regulator-name = "USB_PWR";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -40,20 +40,34 @@
enable-active-high;
};
- vcc_3v3: regulator-vcc_3v3 {
+ vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- vcc_1v8: regulator-vcc_1v8 {
+ vddio_ao18: regulator-vddio_ao18 {
compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
+ regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
@@ -66,15 +80,32 @@
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
- <&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
&ethmac {
status = "okay";
pinctrl-0 = <&eth_rgmii_pins>;
@@ -85,10 +116,6 @@
amlogic,tx-delay-ns = <2>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -97,10 +124,30 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_15 */
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
};
};
};
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
@@ -115,10 +162,15 @@
clock-names = "clkin0";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
- pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
+ pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
@@ -126,15 +178,15 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&sdio_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vcc_1v8>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
brcmf: wifi@1 {
reg = <1>;
@@ -151,12 +203,13 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vcc_3v3>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vcc_3v3>;
};
/* eMMC */
@@ -176,9 +229,22 @@
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
- vmmcq-sumpply = <&vcc_1v8>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+ };
};
+/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
@@ -187,7 +253,7 @@
&usb0_phy {
status = "okay";
- phy-supply = <&usb_vbus>;
+ phy-supply = <&usb_pwr>;
};
&usb1_phy {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 2d2db783c44c..4c539881fbb7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -59,6 +59,13 @@
regulator-max-microvolt = <3300000>;
};
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
@@ -130,10 +137,6 @@
amlogic,tx-delay-ns = <2>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
@@ -142,6 +145,10 @@
eth_phy0: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
};
};
};
@@ -172,6 +179,11 @@
clock-names = "clkin0";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
@@ -183,7 +195,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -208,7 +220,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
@@ -237,6 +249,19 @@
vqmmc-supply = <&vddio_boot>;
};
+/* This is connected to the Bluetooth module: */
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+ };
+};
+
/* This UART is brought out to the DB9 connector */
&uart_AO {
status = "okay";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index a60d3652beee..f734faaf7b78 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -381,10 +381,15 @@
};
emmc_pins: emmc {
- mux {
+ mux-0 {
groups = "emmc_nand_d07",
- "emmc_cmd",
- "emmc_clk";
+ "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "emmc_clk";
function = "emmc";
bias-disable;
};
@@ -394,7 +399,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
- bias-disable;
+ bias-pull-down;
};
};
@@ -436,13 +441,18 @@
};
sdcard_pins: sdcard {
- mux {
+ mux-0 {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
- "sdcard_cmd",
- "sdcard_clk";
+ "sdcard_cmd";
+ function = "sdcard";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "sdcard_clk";
function = "sdcard";
bias-disable;
};
@@ -457,13 +467,18 @@
};
sdio_pins: sdio {
- mux {
+ mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
- "sdio_cmd",
- "sdio_clk";
+ "sdio_cmd";
+ function = "sdio";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "sdio_clk";
function = "sdio";
bias-disable;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index 70433e023fda..3a1484e5b8e1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -160,7 +160,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index 0c8e8305b1f3..b08c4537f260 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -70,20 +70,21 @@
amlogic,tx-delay-ns = <2>;
- /* External PHY reset is shared with internal PHY Led signals */
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ /* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
+
+ /* External PHY reset is shared with internal PHY Led signal */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
eee-broken-1000t;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 255cede7b447..4b8ce738e213 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -115,11 +115,13 @@
regulator-max-microvolt = <1800000>;
};
+ /* This is provided by LDOs on the eMMC daugther card */
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
};
};
@@ -235,7 +237,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
@@ -253,9 +255,9 @@
bus-width = <8>;
cap-mmc-highspeed;
- mmc-ddr-3_3v;
- max-frequency = <50000000>;
- non-removable;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ max-frequency = <200000000>;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index 9cbdb85fb591..26907ac82930 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@@ -180,7 +180,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
index bc811a2faf42..e3c16f50814b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@@ -114,7 +114,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -134,7 +134,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 3093ae421b17..c959456bacc6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -326,10 +326,15 @@
};
emmc_pins: emmc {
- mux {
+ mux-0 {
groups = "emmc_nand_d07",
- "emmc_cmd",
- "emmc_clk";
+ "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "emmc_clk";
function = "emmc";
bias-disable;
};
@@ -339,7 +344,7 @@
mux {
groups = "emmc_ds";
function = "emmc";
- bias-disable;
+ bias-pull-down;
};
};
@@ -381,13 +386,18 @@
};
sdcard_pins: sdcard {
- mux {
+ mux-0 {
groups = "sdcard_d0",
"sdcard_d1",
"sdcard_d2",
"sdcard_d3",
- "sdcard_cmd",
- "sdcard_clk";
+ "sdcard_cmd";
+ function = "sdcard";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "sdcard_clk";
function = "sdcard";
bias-disable;
};
@@ -402,13 +412,18 @@
};
sdio_pins: sdio {
- mux {
+ mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
- "sdio_cmd",
- "sdio_clk";
+ "sdio_cmd";
+ function = "sdio";
+ bias-pull-up;
+ };
+
+ mux-1 {
+ groups = "sdio_clk";
function = "sdio";
bias-disable;
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 3f086ed7de05..989d33ac6eae 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -18,7 +18,6 @@
aliases {
serial0 = &uart_AO;
- serial1 = &uart_A;
serial2 = &uart_AO_B;
};
@@ -63,11 +62,9 @@
gpio-keys-polled {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
- button@0 {
+ power-button {
label = "power";
linux,code = <KEY_POWER>;
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
@@ -242,11 +239,6 @@
amlogic,tx-delay-ns = <2>;
- /* External PHY reset is shared with internal PHY Led signals */
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
/* External PHY is in RGMII */
phy-mode = "rgmii";
@@ -257,6 +249,11 @@
external_phy: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
@@ -324,12 +321,13 @@
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -349,11 +347,12 @@
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
@@ -366,17 +365,16 @@
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
- pinctrl-names = "default";
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
bus-width = <8>;
- cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
- mmc-hs400-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
@@ -404,8 +402,14 @@
/* This one is connected to the Bluetooth module */
&uart_A {
status = "okay";
- pinctrl-0 = <&uart_a_pins>;
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ };
};
/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
index 25f3b6b14043..c2bd4dbbf38c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@@ -101,19 +101,19 @@
amlogic,tx-delay-ns = <2>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ /* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
};
};
@@ -144,7 +144,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index 73d656e4aade..ea45ae0c71b7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -52,20 +52,21 @@
amlogic,tx-delay-ns = <2>;
- /* External PHY reset is shared with internal PHY Led signals */
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ /* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
+
+ /* External PHY reset is shared with internal PHY Led signal */
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_15 */
interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
index 7fa20a8ede17..5cd4d35006d0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@@ -101,10 +101,6 @@
/* Select external PHY by default */
phy-handle = <&external_phy>;
- snps,reset-gpio = <&gpio GPIOZ_14 0>;
- snps,reset-delays-us = <0 10000 1000000>;
- snps,reset-active-low;
-
amlogic,tx-delay-ns = <2>;
/* External PHY is in RGMII */
@@ -113,9 +109,13 @@
&external_mdio {
external_phy: ethernet-phy@0 {
- compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+ /* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
};
};
@@ -143,7 +143,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
non-removable;
disable-wp;
@@ -167,7 +167,7 @@
bus-width = <4>;
cap-sd-highspeed;
- max-frequency = <100000000>;
+ max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 7446e0dc154d..26a039a028b8 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -150,7 +150,7 @@
/* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/
main_funnel: funnel@20040000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20040000 0 0x1000>;
clocks = <&soc_smc50mhz>;
@@ -281,7 +281,7 @@
};
funnel@220c0000 { /* cluster0 funnel */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x220c0000 0 0x1000>;
clocks = <&soc_smc50mhz>;
@@ -366,7 +366,7 @@
};
funnel@230c0000 { /* cluster1 funnel */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x230c0000 0 0x1000>;
clocks = <&soc_smc50mhz>;
diff --git a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
index cf285152deab..eda3d9e18af6 100644
--- a/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-cs-r1r2.dtsi
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/ {
funnel@20130000 { /* cssys1 */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20130000 0 0x1000>;
clocks = <&soc_smc50mhz>;
@@ -47,7 +47,7 @@
};
funnel@20150000 { /* cssys2 */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x20150000 0 0x1000>;
clocks = <&soc_smc50mhz>;
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index 1792b074e9a3..9f60dacb4f80 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -106,7 +106,6 @@
flash@0,00000000 {
/* 2 * 32MiB NOR Flash memory mounted on CS0 */
compatible = "arm,vexpress-flash", "cfi-flash";
- linux,part-probe = "afs";
reg = <0 0x00000000 0x04000000>;
bank-width = <4>;
/*
@@ -116,6 +115,9 @@
* flash hardware access is disabled by default.
*/
status = "disabled";
+ partitions {
+ compatible = "arm,arm-firmware-suite";
+ };
};
ethernet@2,00000000 {
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
new file mode 100644
index 000000000000..55259f973b5a
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+ usb {
+ compatible = "simple-bus";
+ dma-ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x68500000 0x00400000>;
+
+ usbphy0: usb-phy@0 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00000000 0x100>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ xhci0: usb@1000 {
+ compatible = "generic-xhci";
+ reg = <0x00001000 0x1000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy0 1>, <&usbphy0 0>;
+ phy-names = "phy0", "phy1";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ bdc0: usb@2000 {
+ compatible = "brcm,bdc-v0.16";
+ reg = <0x00002000 0x1000>;
+ interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy0 0>, <&usbphy0 1>;
+ phy-names = "phy0", "phy1";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ usbphy1: usb-phy@10000 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00010000 0x100>;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ usbphy2: usb-phy@20000 {
+ compatible = "brcm,sr-usb-hs-phy";
+ reg = <0x00020000 0x100>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ xhci1: usb@11000 {
+ compatible = "generic-xhci";
+ reg = <0x00011000 0x1000>;
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
+ phy-names = "phy0", "phy1", "phy2";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ bdc1: usb@21000 {
+ compatible = "brcm,bdc-v0.16";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy2>;
+ phy-names = "phy0";
+ dma-coherent;
+ status = "disabled";
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 35c4670c00d1..71e2e34400d4 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -287,6 +287,7 @@
#include "stingray-fs4.dtsi"
#include "stingray-sata.dtsi"
#include "stingray-pcie.dtsi"
+ #include "stingray-usb.dtsi"
hsls {
compatible = "simple-bus";
@@ -612,4 +613,111 @@
status = "disabled";
};
};
+
+ tmons {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x8f100000 0x100>;
+
+ tmon: tmon@0 {
+ compatible = "brcm,sr-thermal";
+ reg = <0x0 0x40>;
+ brcm,tmon-mask = <0x3f>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ ihost0_thermal: ihost0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 0>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost1_thermal: ihost1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 1>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost2_thermal: ihost2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 2>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ ihost3_thermal: ihost3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 3>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ crmu_thermal: crmu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 4>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ nitro_thermal: nitro-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tmon 5>;
+ trips {
+ cpu-crit {
+ temperature = <105000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ nic-hsls {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x7fffffff>;
+
+ nic_i2c0: i2c@60826100 {
+ compatible = "brcm,iproc-nic-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60826100 0x100>,
+ <0x60e00408 0x1000>;
+ brcm,ape-hsls-addr-mask = <0x03400000>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index d2de16645e10..6f90b0e62cba 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -350,6 +350,11 @@
pinctrl-0 = <&te_irq>;
};
+&gpu {
+ mali-supply = <&buck6_reg>;
+ status = "okay";
+};
+
&hdmi {
hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
status = "okay";
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index d29d13f4694f..a76f620f7f35 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -249,6 +249,57 @@
};
};
+ gpu: gpu@14ac0000 {
+ compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+ reg = <0x14ac0000 0x5000>;
+ interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ clocks = <&cmu_g3d CLK_ACLK_G3D>;
+ clock-names = "core";
+ power-domains = <&pd_g3d>;
+ operating-points-v2 = <&gpu_opp_table>;
+ status = "disabled";
+
+ gpu_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-267000000 {
+ opp-hz = /bits/ 64 <267000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-350000000 {
+ opp-hz = /bits/ 64 <350000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp-420000000 {
+ opp-hz = /bits/ 64 <420000000>;
+ opp-microvolt = <1025000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp-550000000 {
+ opp-hz = /bits/ 64 <550000000>;
+ opp-microvolt = <1125000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1150000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <1150000>;
+ };
+ };
+ };
+
psci {
compatible = "arm,psci";
method = "smc";
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 00dd89b92b42..080e0f56e108 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -59,6 +59,11 @@
clock-frequency = <24000000>;
};
+&gpu {
+ mali-supply = <&buck6_reg>;
+ status = "okay";
+};
+
&serial_2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 077d23478901..bcb9d8cee267 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -78,6 +78,17 @@
};
};
+ gpu: gpu@14ac0000 {
+ compatible = "samsung,exynos5433-mali", "arm,mali-t760";
+ reg = <0x14ac0000 0x5000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "job", "mmu", "gpu";
+ status = "disabled";
+ /* TODO: operating points for DVFS, cooling device */
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 0bd122f60549..c043aca66572 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068d9605..de6ef39f3118 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -17,6 +17,7 @@
compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
aliases {
+ crypto = &crypto;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
@@ -47,6 +48,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -117,6 +127,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
@@ -153,3 +169,7 @@
&sai1 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272fb0738..9fb911317ecd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -16,6 +16,7 @@
compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
aliases {
+ crypto = &crypto;
serial0 = &duart0;
serial1 = &duart1;
};
@@ -43,6 +44,15 @@
regulator-always-on;
};
+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -115,6 +125,12 @@
#size-cells = <0>;
reg = <0x3>;
+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
@@ -151,3 +167,7 @@
&sai4 {
status = "okay";
};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 22a1c74dddf3..7975519b4f56 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -70,6 +70,27 @@
clock-output-names = "sysclk";
};
+ dpclk: clock-dp {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ clock-output-names= "dpclk";
+ };
+
+ aclk: clock-axi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <650000000>;
+ clock-output-names= "aclk";
+ };
+
+ pclk: clock-apb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <650000000>;
+ clock-output-names= "pclk";
+ };
+
reboot {
compatible ="syscon-reboot";
regmap = <&dcfg>;
@@ -285,13 +306,24 @@
#interrupt-cells = <2>;
};
- wdog0: watchdog@23c0000 {
- compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt";
- reg = <0x0 0x23c0000 0x0 0x10000>;
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
- big-endian;
- status = "disabled";
+ usb0: usb@3100000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
+ usb1: usb@3110000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
};
sata: sata@3200000 {
@@ -356,6 +388,79 @@
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};
+ crypto: crypto@8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ qdma: dma-controller@8380000 {
+ compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma";
+ reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
+ <0x0 0x8390000 0x0 0x10000>, /* Status regs */
+ <0x0 0x83a0000 0x0 0x40000>; /* Block regs */
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "qdma-error", "qdma-queue0",
+ "qdma-queue1", "qdma-queue2", "qdma-queue3";
+ dma-channels = <8>;
+ block-number = <1>;
+ block-offset = <0x10000>;
+ fsl,dma-queues = <2>;
+ status-sizes = <64>;
+ queue-sizes = <64 64>;
+ };
+
+ cluster1_core0_watchdog: watchdog@c000000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
+ cluster1_core1_watchdog: watchdog@c010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
sai1: audio-controller@f100000 {
#sound-dai-cells = <0>;
compatible = "fsl,vf610-sai";
@@ -439,4 +544,21 @@
};
};
};
+
+ malidp0: display@f080000 {
+ compatible = "arm,mali-dp500";
+ reg = <0x0 0xf080000 0x0 0x10000>;
+ interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "DE", "SE";
+ clocks = <&dpclk>, <&aclk>, <&aclk>, <&pclk>;
+ clock-names = "pxlclk", "mclk", "aclk", "pclk";
+ arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+
+ port {
+ dp0_out: endpoint {
+
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 2d5d89475b76..ee7f2b2fc1ff 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -37,6 +37,41 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ wm8524: audio-codec {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8524";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_wlf>;
+ wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ };
+
+ sound-wm8524 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8524-audio";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,frame-master = <&cpudai>;
+ simple-audio-card,bitclock-master = <&cpudai>;
+ simple-audio-card,widgets =
+ "Line", "Left Line Out Jack",
+ "Line", "Right Line Out Jack";
+ simple-audio-card,routing =
+ "Left Line Out Jack", "LINEVOUTL",
+ "Right Line Out Jack", "LINEVOUTR";
+
+ cpudai: simple-audio-card,cpu {
+ sound-dai = <&sai3>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&wm8524>;
+ clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
};
&fec1 {
@@ -61,6 +96,19 @@
};
};
+&sai3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+ assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+ assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -95,6 +143,120 @@
status = "okay";
};
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic@4b {
+ compatible = "rohm,bd71847";
+ reg = <0x4b>;
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+ rohm,reset-snvs-powered;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ // BUCK5 in datasheet
+ regulator-name = "BUCK3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ // BUCK6 in datasheet
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ // BUCK7 in datasheet
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ buck6_reg: BUCK6 {
+ // BUCK8 in datasheet
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "LDO2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "LDO6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
&iomuxc {
pinctrl-names = "default";
@@ -124,12 +286,40 @@
>;
};
+ pinctrl_gpio_wlf: gpiowlfgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_pmic: pmicirq {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
fsl,pins = <
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6
+ MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6
+ MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6
+ MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 6b407a94c06e..232a7412755a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -53,6 +53,8 @@
enable-method = "psci";
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
A53_1: cpu@1 {
@@ -100,14 +102,23 @@
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <850000>;
+ opp-supported-hw = <0xe>, <0x7>;
clock-latency-ns = <150000>;
};
opp-1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <900000>;
+ opp-supported-hw = <0xc>, <0x7>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1000000>;
+ /* Consumer only but rely on speed grading */
+ opp-supported-hw = <0x8>, <0x7>;
clock-latency-ns = <150000>;
- opp-suspend;
};
};
@@ -158,15 +169,6 @@
clock-output-names = "clk_ext4";
};
- gic: interrupt-controller@38800000 {
- compatible = "arm,gic-v3";
- reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
- <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
-
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -189,7 +191,23 @@
arm,no-tick-in-suspend;
};
- soc {
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+ clock-names = "main_clk";
+ };
+
+ soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -199,13 +217,80 @@
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x30000000 0x30000000 0x400000>;
+
+ sai1: sai@30010000 {
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30010000 0x10000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+ <&clk IMX8MM_CLK_SAI1_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai2: sai@30020000 {
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30020000 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+ <&clk IMX8MM_CLK_SAI2_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai3: sai@30030000 {
+ #sound-dai-cells = <0>;
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30030000 0x10000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+ <&clk IMX8MM_CLK_SAI3_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai5: sai@30050000 {
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30050000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+ <&clk IMX8MM_CLK_SAI5_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai6: sai@30060000 {
+ compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+ reg = <0x30060000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+ <&clk IMX8MM_CLK_SAI6_ROOT>,
+ <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+ clock-names = "bus", "mclk1", "mclk2", "mclk3";
+ dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
gpio1: gpio@30200000 {
compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
reg = <0x30200000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -217,6 +302,7 @@
reg = <0x30210000 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -228,6 +314,7 @@
reg = <0x30220000 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -239,6 +326,7 @@
reg = <0x30230000 0x10000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -250,6 +338,7 @@
reg = <0x30240000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
@@ -319,6 +408,10 @@
/* For nvmem subnodes */
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
};
anatop: anatop@30360000 {
@@ -336,6 +429,8 @@
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
+ clock-names = "snvs-rtc";
};
snvs_pwrkey: snvs-powerkey {
@@ -344,6 +439,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};
@@ -369,7 +465,7 @@
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x30400000 0x30400000 0x400000>;
pwm1: pwm@30660000 {
compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
@@ -420,7 +516,7 @@
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x30800000 0x30800000 0x400000>;
ecspi1: spi@30820000 {
compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -639,7 +735,7 @@
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x32c00000 0x32c00000 0x400000>;
usbotg1: usb@32e40000 {
compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
@@ -656,14 +752,6 @@
status = "disabled";
};
- usbphynop1: usbphynop1 {
- compatible = "usb-nop-xceiv";
- clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
- assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
- clock-names = "main_clk";
- };
-
usbmisc1: usbmisc@32e40200 {
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
@@ -685,14 +773,6 @@
status = "disabled";
};
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
- assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
- clock-names = "main_clk";
- };
-
usbmisc2: usbmisc@32e50200 {
compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
#index-cells = <1>;
@@ -729,5 +809,14 @@
dma-names = "rx-tx";
status = "disabled";
};
+
+ gic: interrupt-controller@38800000 {
+ compatible = "arm,gic-v3";
+ reg = <0x38800000 0x10000>, /* GIC Dist */
+ <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index b2038be8bbd7..e3df9b8cd9ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -242,6 +242,10 @@
power-supply = <&sw1a_reg>;
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
new file mode 100644
index 000000000000..5179e22f5126
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018-2019 Purism SPC
+ */
+
+/dts-v1/;
+
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/pwm/pwm.h"
+#include "dt-bindings/usb/pd.h"
+#include "imx8mq.dtsi"
+
+/ {
+ model = "Purism Librem 5 devkit";
+ compatible = "purism,librem5-devkit", "fsl,imx8mq";
+
+ backlight_dsi: backlight-dsi {
+ compatible = "pwm-backlight";
+ /* 200 Hz for the PAM2841 */
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ /* Default brightness level (index into the array defined by */
+ /* the "brightness-levels" property) */
+ default-brightness-level = <0>;
+ power-supply = <&reg_22v4_p>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ btn1 {
+ label = "VOL_UP";
+ gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ btn2 {
+ label = "VOL_DOWN";
+ gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ hp-det {
+ label = "HP_DET";
+ gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ wakeup-source;
+ linux,code = <KEY_HP>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ led1 {
+ label = "LED 1";
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pmic_osc: clock-pmic {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic_osc";
+ };
+
+ reg_1v8_p: regulator-1v8-p {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8_p";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&reg_pwr_en>;
+ };
+
+ reg_2v8_p: regulator-2v8-p {
+ compatible = "regulator-fixed";
+ regulator-name = "2v8_p";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ vin-supply = <&reg_pwr_en>;
+ };
+
+ reg_3v3_p: regulator-3v3-p {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_p";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&reg_pwr_en>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ reg_5v_p: regulator-5v-p {
+ compatible = "regulator-fixed";
+ regulator-name = "5v_p";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&reg_pwr_en>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ reg_22v4_p: regulator-22v4-p {
+ compatible = "regulator-fixed";
+ regulator-name = "22v4_P";
+ regulator-min-microvolt = <22400000>;
+ regulator-max-microvolt = <22400000>;
+ vin-supply = <&reg_pwr_en>;
+ };
+
+ reg_pwr_en: regulator-pwr-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwr_en>;
+ regulator-name = "PWR_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_pwr>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ vibrator {
+ compatible = "gpio-vibrator";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_haptic>;
+ enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&reg_3v3_p>;
+ };
+
+ wifi_pwr_en: regulator-wifi-en {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+ regulator-name = "WIFI_EN";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+};
+
+&clk {
+ assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>;
+ assigned-clock-rates = <786432000>, <722534400>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ phy-supply = <&reg_3v3_p>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ pmic: pmic@4b {
+ compatible = "rohm,bd71837";
+ reg = <0x4b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ clocks = <&pmic_osc>;
+ clock-names = "osc";
+ clock-output-names = "pmic_clk";
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 GPIO_ACTIVE_LOW>;
+ interrupt-names = "irq";
+ rohm,reset-snvs-powered;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <900000>;
+ rohm,dvs-idle-voltage = <850000>;
+ rohm,dvs-suspend-voltage = <800000>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1000000>;
+ rohm,dvs-idle-voltage = <900000>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ rohm,dvs-run-voltage = <1000000>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1300000>;
+ rohm,dvs-run-voltage = <1000000>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <1605000>;
+ regulator-max-microvolt = <1995000>;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "buck8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ /* leave on for snvs power button */
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-boot-on;
+ /* leave on for snvs power button */
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ typec_ptn5100: usb_typec@52 {
+ compatible = "nxp,ptn5110";
+ reg = <0x52>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_typec>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 2000,
+ PDO_FIXED_USB_COMM |
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_DATA_SWAP )>;
+ sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM |
+ PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_DATA_SWAP )
+ PDO_VAR(5000, 3000, 3000)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_con_hs: endpoint {
+ remote-endpoint = <&typec_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_con_ss: endpoint {
+ remote-endpoint = <&typec_ss>;
+ };
+ };
+ };
+ };
+ };
+
+ rtc@68 {
+ compatible = "microcrystal,rv4162";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ charger@6b { /* bq25896 */
+ compatible = "ti,bq25890";
+ reg = <0x6b>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ ti,battery-regulation-voltage = <4192000>; /* 4.192V */
+ ti,charge-current = <1600000>; /* 1.6A */
+ ti,termination-current = <66000>; /* 66mA */
+ ti,precharge-current = <130000>; /* 130mA */
+ ti,minimum-sys-voltage = <3000000>; /* 3V */
+ ti,boost-voltage = <5000000>; /* 5V */
+ ti,boost-max-current = <50000>; /* 50mA */
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ magnetometer@1e {
+ compatible = "st,lsm9ds1-magn";
+ reg = <0x1e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_imu>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ vdd-supply = <&reg_3v3_p>;
+ vddio-supply = <&reg_3v3_p>;
+ };
+
+ touchscreen@5d {
+ compatible = "goodix,gt5688";
+ reg = <0x5d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1440>;
+ AVDD28-supply = <&reg_2v8_p>;
+ VDDIO-supply = <&reg_1v8_p>;
+ };
+};
+
+&iomuxc {
+ pinctrl_bl: blgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */
+ >;
+ };
+
+ pinctrl_bt: btgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */
+ MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */
+ >;
+ };
+
+ pinctrl_charger: chargergrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
+ MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f
+ >;
+ };
+
+ pinctrl_ts: tsgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */
+ MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */
+ >;
+ };
+
+ pinctrl_gpio_leds: gpioledgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16
+ >;
+ };
+
+ pinctrl_gpio_keys: gpiokeygrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16
+ MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16
+ MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */
+ >;
+ };
+
+ pinctrl_haptic: hapticgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f
+ MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f
+ MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f
+ >;
+ };
+
+ pinctrl_imu: imugrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */
+ >;
+ };
+
+ pinctrl_pwr_en: pwrengrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */
+ >;
+ };
+
+ pinctrl_typec: typecgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16
+ MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
+ MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49
+ MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49
+ MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49
+ MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49
+ MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49
+ MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49
+ MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
+ MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
+ MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
+ MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
+ MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
+ MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
+ MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
+ MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
+ MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
+ MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
+ MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
+ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
+ >;
+ };
+
+ pinctrl_usdhc2_pwr: usdhc2grppwr {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
+ MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
+ MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf
+ MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf
+ MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf
+ MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+
+ pinctrl_wifi_pwr_en: wifipwrengrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06
+ >;
+ };
+
+ pinctrl_wwan: wwangrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */
+ MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */
+ MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */
+ >;
+ };
+};
+
+&pgc_gpu {
+ power-supply = <&buck3_reg>;
+};
+
+&pgc_vpu {
+ power-supply = <&buck4_reg>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bl>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 { /* GNSS */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 { /* BT */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3_phy1 {
+ vbus-supply = <&reg_5v_p>;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dr_mode = "otg";
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ typec_ss: endpoint {
+ remote-endpoint = <&usb_con_ss>;
+ };
+ };
+};
+
+&usb_dwc3_1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ power-supply = <&wifi_pwr_en>;
+ non-removable;
+ disable-wp;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6d635ba0904c..d09b808eff87 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/power/imx8mq-power.h>
#include <dt-bindings/reset/imx8mq-reset.h>
#include <dt-bindings/gpio/gpio.h>
+#include "dt-bindings/input/input.h"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8mq-pinfunc.h"
@@ -19,6 +20,11 @@
#size-cells = <2>;
aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
@@ -95,6 +101,8 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
A53_1: cpu@1 {
@@ -145,14 +153,32 @@
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <900000>;
+ /* Industrial only */
+ opp-supported-hw = <0xf>, <0x4>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <900000>;
+ /* Consumer only */
+ opp-supported-hw = <0xe>, <0x3>;
clock-latency-ns = <150000>;
};
opp-1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1000000>;
+ opp-supported-hw = <0xc>, <0x7>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1000000>;
+ /* Consumer only but rely on speed grading */
+ opp-supported-hw = <0x8>, <0x7>;
clock-latency-ns = <150000>;
- opp-suspend;
};
};
@@ -415,6 +441,10 @@
clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
#address-cells = <1>;
#size-cells = <1>;
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
};
anatop: syscon@30360000 {
@@ -433,8 +463,18 @@
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>;
+ clock-names = "snvs-rtc";
};
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ status = "disabled";
+ };
};
clk: clock-controller@30380000 {
@@ -815,6 +855,25 @@
};
};
+ bus@32c00000 { /* AIPS4 */
+ compatible = "fsl,imx8mq-aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x32c00000 0x32c00000 0x400000>;
+
+ irqsteer: interrupt-controller@32e2d000 {
+ compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <0>;
+ fsl,num-irqs = <64>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
gpu: gpu@38000000 {
compatible = "vivante,gc";
reg = <0x38000000 0x40000>;
@@ -903,7 +962,6 @@
status = "disabled";
};
-
pcie0: pcie@33800000 {
compatible = "fsl,imx8mq-pcie";
reg = <0x33800000 0x400000>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0683ee2a48ae..05fa0b7f36bb 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -17,11 +17,19 @@
#size-cells = <2>;
aliases {
+ gpio0 = &lsio_gpio0;
+ gpio1 = &lsio_gpio1;
+ gpio2 = &lsio_gpio2;
+ gpio3 = &lsio_gpio3;
+ gpio4 = &lsio_gpio4;
+ gpio5 = &lsio_gpio5;
+ gpio6 = &lsio_gpio6;
+ gpio7 = &lsio_gpio7;
mmc0 = &usdhc1;
mmc1 = &usdhc2;
mmc2 = &usdhc3;
- serial0 = &adma_lpuart0;
mu1 = &lsio_mu1;
+ serial0 = &adma_lpuart0;
};
cpus {
@@ -141,6 +149,12 @@
compatible = "fsl,imx8qxp-iomuxc";
};
+ ocotp: imx8qx-ocotp {
+ compatible = "fsl,imx8qxp-scu-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
pd: imx8qx-pd {
compatible = "fsl,imx8qxp-scu-pd";
#power-domain-cells = <1>;
@@ -149,6 +163,11 @@
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+
+ watchdog {
+ compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
};
timer {
@@ -378,56 +397,25 @@
};
};
- lsio_subsys: bus@5d000000 {
+ ddr_subsyss: bus@5c000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
-
- lsio_lpcg: clock-controller@5d400000 {
- compatible = "fsl,imx8qxp-lpcg-lsio";
- reg = <0x5d400000 0x400000>;
- #clock-cells = <1>;
- };
+ ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
- lsio_mu0: mailbox@5d1b0000 {
- compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
- reg = <0x5d1b0000 0x10000>;
- interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- status = "disabled";
- };
-
- lsio_mu1: mailbox@5d1c0000 {
- compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
- reg = <0x5d1c0000 0x10000>;
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- };
-
- lsio_mu2: mailbox@5d1d0000 {
- compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
- reg = <0x5d1d0000 0x10000>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- status = "disabled";
- };
-
- lsio_mu3: mailbox@5d1e0000 {
- compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
- reg = <0x5d1e0000 0x10000>;
- interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- status = "disabled";
+ ddr-pmu@5c020000 {
+ compatible = "fsl,imx8-ddr-pmu";
+ reg = <0x5c020000 0x10000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
};
+ };
- lsio_mu4: mailbox@5d1f0000 {
- compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
- reg = <0x5d1f0000 0x10000>;
- interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- status = "disabled";
- };
+ lsio_subsys: bus@5d000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
lsio_gpio0: gpio@5d080000 {
compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
@@ -516,10 +504,58 @@
#interrupt-cells = <2>;
power-domains = <&pd IMX_SC_R_GPIO_7>;
};
- };
- watchdog {
- compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
- timeout-sec = <60>;
+ lsio_mu0: mailbox@5d1b0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1b0000 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu1: mailbox@5d1c0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1c0000 0x10000>;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
+
+ lsio_mu2: mailbox@5d1d0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1d0000 0x10000>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu3: mailbox@5d1e0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1e0000 0x10000>;
+ interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu4: mailbox@5d1f0000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1f0000 0x10000>;
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu13: mailbox@5d280000 {
+ compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+ reg = <0x5d280000 0x10000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ power-domains = <&pd IMX_SC_R_MU_13A>;
+ };
+
+ lsio_lpcg: clock-controller@5d400000 {
+ compatible = "fsl,imx8qxp-lpcg-lsio";
+ reg = <0x5d400000 0x400000>;
+ #clock-cells = <1>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
new file mode 100644
index 000000000000..d607f2f6698c
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-coresight.dtsi
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * dtsi for Hisilicon Hi3660 Coresight
+ *
+ * Copyright (C) 2016-2018 Hisilicon Ltd.
+ *
+ * Author: Wanglai Shi <shiwanglai@hisilicon.com>
+ *
+ */
+/ {
+ soc {
+ /* A53 cluster internals */
+ etm@ecc40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xecc40000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu0>;
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in0>;
+ };
+ };
+ };
+ };
+
+ etm@ecd40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xecd40000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu1>;
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in1>;
+ };
+ };
+ };
+ };
+
+ etm@ece40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xece40000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu2>;
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in2>;
+ };
+ };
+ };
+ };
+
+ etm@ecf40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xecf40000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu3>;
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_in3>;
+ };
+ };
+ };
+ };
+
+ funnel@ec801000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0xec801000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ cluster0_funnel_out: endpoint {
+ remote-endpoint =
+ <&cluster0_etf_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster0_funnel_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ cluster0_funnel_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ cluster0_funnel_in2: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ cluster0_funnel_in3: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+ };
+
+ etf@ec802000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0xec802000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ cluster0_etf_in: endpoint {
+ remote-endpoint =
+ <&cluster0_funnel_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ cluster0_etf_out: endpoint {
+ remote-endpoint =
+ <&combo_funnel_in0>;
+ };
+ };
+ };
+ };
+
+ /* A73 cluster internals */
+ etm@ed440000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xed440000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu4>;
+
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in0>;
+ };
+ };
+ };
+ };
+
+ etm@ed540000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xed540000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu5>;
+
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in1>;
+ };
+ };
+ };
+ };
+
+ etm@ed640000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xed640000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu6>;
+
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in2>;
+ };
+ };
+ };
+ };
+
+ etm@ed740000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0 0xed740000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu7>;
+
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_in3>;
+ };
+ };
+ };
+ };
+
+ funnel@ed001000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0xed001000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+ out-ports {
+ port {
+ cluster1_funnel_out: endpoint {
+ remote-endpoint =
+ <&cluster1_etf_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ cluster1_funnel_in0: endpoint {
+ remote-endpoint = <&etm4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ cluster1_funnel_in1: endpoint {
+ remote-endpoint = <&etm5_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ cluster1_funnel_in2: endpoint {
+ remote-endpoint = <&etm6_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ cluster1_funnel_in3: endpoint {
+ remote-endpoint = <&etm7_out>;
+ };
+ };
+ };
+ };
+
+ etf@ed002000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0xed002000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ cluster1_etf_in: endpoint {
+ remote-endpoint =
+ <&cluster1_funnel_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ cluster1_etf_out: endpoint {
+ remote-endpoint =
+ <&combo_funnel_in1>;
+ };
+ };
+ };
+ };
+
+ /* An invisible combo funnel between clusters and top funnel */
+ funnel {
+ compatible = "arm,coresight-static-funnel";
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ combo_funnel_out: endpoint {
+ remote-endpoint =
+ <&top_funnel_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ combo_funnel_in0: endpoint {
+ remote-endpoint =
+ <&cluster0_etf_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ combo_funnel_in1: endpoint {
+ remote-endpoint =
+ <&cluster1_etf_out>;
+ };
+ };
+ };
+ };
+
+ /* Top internals */
+ funnel@ec031000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0 0xec031000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ out-ports {
+ port {
+ top_funnel_out: endpoint {
+ remote-endpoint =
+ <&top_etf_in>;
+ };
+ };
+ };
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ top_funnel_in: endpoint {
+ remote-endpoint =
+ <&combo_funnel_out>;
+ };
+ };
+ };
+ };
+
+ etf@ec036000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0xec036000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ top_etf_in: endpoint {
+ remote-endpoint =
+ <&top_funnel_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ top_etf_out: endpoint {
+ remote-endpoint =
+ <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ replicator {
+ compatible = "arm,coresight-static-replicator";
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint =
+ <&top_etf_out>;
+ };
+ };
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator0_out0: endpoint {
+ remote-endpoint = <&etr_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator0_out1: endpoint {
+ remote-endpoint = <&tpiu_in>;
+ };
+ };
+ };
+ };
+
+ etr@ec033000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0 0xec033000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint =
+ <&replicator0_out0>;
+ };
+ };
+ };
+ };
+
+ tpiu@ec032000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0 0xec032000 0 0x1000>;
+ clocks = <&crg_ctrl HI3660_PCLK>;
+ clock-names = "apb_pclk";
+
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint =
+ <&replicator0_out1>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index aa6a8ad31be2..253cc345f143 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1154,3 +1154,5 @@
};
};
};
+
+#include "hi3660-coresight.dtsi"
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
index 30f54b77c2f1..651771a73ed6 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-coresight.dtsi
@@ -11,7 +11,7 @@
/ {
soc {
funnel@f6401000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xf6401000 0 0x1000>;
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
@@ -61,7 +61,7 @@
};
replicator {
- compatible = "arm,coresight-replicator";
+ compatible = "arm,coresight-static-replicator";
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
@@ -129,7 +129,7 @@
};
funnel@f6501000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0xf6501000 0 0x1000>;
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
index 6be019e1888e..fbcf03f86c96 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
@@ -95,25 +95,9 @@
flash@0 {
reg = <0>;
- compatible = "winbond,w25q32dw", "jedec,spi-flash";
+ compatible = "jedec,spi-nor";
spi-max-frequency = <104000000>;
m25p,fast-read;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "uboot";
- reg = <0 0x180000>;
- };
-
- partition@180000 {
- label = "ubootenv";
- reg = <0x180000 0x10000>;
- };
- };
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
index d20d84ce7ca8..f34ee87a0f56 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts
@@ -28,6 +28,32 @@
ethernet2 = &cp0_eth2;
};
+ cp0_exp_usb3_0_current_regulator: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0-usb3-0-current-regulator";
+ regulator-type = "current";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <900000>;
+ gpios = <&expander0 4 GPIO_ACTIVE_HIGH>;
+ states = <500000 0x0
+ 900000 0x1>;
+ enable-active-high;
+ gpios-states = <0>;
+ };
+
+ cp0_exp_usb3_1_current_regulator: gpio-regulator {
+ compatible = "regulator-gpio";
+ regulator-name = "cp0-usb3-1-current-regulator";
+ regulator-type = "current";
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <900000>;
+ gpios = <&expander0 5 GPIO_ACTIVE_HIGH>;
+ states = <500000 0x0
+ 900000 0x1>;
+ enable-active-high;
+ gpios-states = <0>;
+ };
+
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb3h0-vbus";
@@ -35,6 +61,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&cp0_exp_usb3_0_current_regulator>;
};
cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
@@ -44,6 +71,7 @@
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&cp0_exp_usb3_1_current_regulator>;
};
cp0_usb3_0_phy: cp0-usb3-0-phy {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 9143aa13ceb1..f275d9420d5b 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -63,6 +63,7 @@
tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
+ maximum-power-milliwatt = <2000>;
};
leds {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index 9f4f939ab65f..d6e9c014c2f9 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -27,6 +27,8 @@
ethernet1 = &cp0_eth2;
ethernet2 = &cp1_eth0;
ethernet3 = &cp1_eth1;
+ i2c1 = &cp0_i2c0;
+ i2c2 = &cp1_i2c0;
};
cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
@@ -72,11 +74,6 @@
};
};
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
&spi0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 329f8ceeebea..205071b45a32 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -184,6 +184,8 @@
num-lanes = <4>;
num-viewport = <8>;
reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>;
+ ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000
+ 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
index 861fd21922c4..9024a2d9db07 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi
@@ -20,12 +20,14 @@
compatible = "arm,cortex-a72";
reg = <0x000>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x001>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
index 2baafe12ebd4..ea13ae78f50d 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi
@@ -20,24 +20,29 @@
compatible = "arm,cortex-a72";
reg = <0x000>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x001>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x100>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x101>;
enable-method = "psci";
+ #cooling-cells = <2>;
};
};
+
};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 91dad7e4ee59..96228f93b272 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
@@ -297,8 +297,6 @@
*
* Only one thermal zone per AP/CP may trigger interrupts at a time, the
* first one that will have a critical trip point will be chosen.
- *
- * The cooling maps are always empty as there are no cooling devices.
*/
thermal-zones {
ap_thermal_ic: ap-thermal-ic {
@@ -318,44 +316,136 @@
cooling-maps { };
};
- ap_thermal_cpu1: ap-thermal-cpu1 {
+ ap_thermal_cpu0: ap-thermal-cpu0 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 1>;
- trips { };
- cooling-maps { };
+ trips {
+ cpu0_hot: cpu0-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_emerg: cpu0-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map0_hot: map0-hot {
+ trip = <&cpu0_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map0_emerg: map0-ermerg {
+ trip = <&cpu0_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
};
- ap_thermal_cpu2: ap-thermal-cpu2 {
+ ap_thermal_cpu1: ap-thermal-cpu1 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 2>;
- trips { };
- cooling-maps { };
+ trips {
+ cpu1_hot: cpu1-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_emerg: cpu1-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map1_hot: map1-hot {
+ trip = <&cpu1_hot>;
+ cooling-device = <&cpu0 1 2>,
+ <&cpu1 1 2>;
+ };
+ map1_emerg: map1-emerg {
+ trip = <&cpu1_emerg>;
+ cooling-device = <&cpu0 3 3>,
+ <&cpu1 3 3>;
+ };
+ };
};
- ap_thermal_cpu3: ap-thermal-cpu3 {
+ ap_thermal_cpu2: ap-thermal-cpu2 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 3>;
- trips { };
- cooling-maps { };
+ trips {
+ cpu2_hot: cpu2-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_emerg: cpu2-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map2_hot: map2-hot {
+ trip = <&cpu2_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map2_emerg: map2-emerg {
+ trip = <&cpu2_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
};
- ap_thermal_cpu4: ap-thermal-cpu4 {
+ ap_thermal_cpu3: ap-thermal-cpu3 {
polling-delay-passive = <1000>;
polling-delay = <1000>;
thermal-sensors = <&ap_thermal 4>;
- trips { };
- cooling-maps { };
+ trips {
+ cpu3_hot: cpu3-hot {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_emerg: cpu3-emerg {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ };
+
+ cooling-maps {
+ map3_hot: map3-bhot {
+ trip = <&cpu3_hot>;
+ cooling-device = <&cpu2 1 2>,
+ <&cpu3 1 2>;
+ };
+ map3_emerg: map3-emerg {
+ trip = <&cpu3_emerg>;
+ cooling-device = <&cpu2 3 3>,
+ <&cpu3 3 3>;
+ };
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
index 4d6e4a097f72..f71afb1de18f 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi
@@ -238,6 +238,7 @@
<85 IRQ_TYPE_LEVEL_HIGH>,
<84 IRQ_TYPE_LEVEL_HIGH>,
<83 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
status = "disabled";
};
@@ -253,6 +254,7 @@
<81 IRQ_TYPE_LEVEL_HIGH>,
<80 IRQ_TYPE_LEVEL_HIGH>,
<79 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e8f952fb279b..458bbc422a94 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,3 +7,4 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
new file mode 100644
index 000000000000..d8e555cbb5d3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ * Erin Lo <erin.lo@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt8183.dtsi"
+
+/ {
+ model = "MediaTek MT8183 evaluation board";
+ compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+};
+
+&auxadc {
+ status = "okay";
+};
+
+&pio {
+ spi_pins_0: spi0{
+ pins_spi{
+ pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+ <PINMUX_GPIO86__FUNC_SPI0_CSB>,
+ <PINMUX_GPIO87__FUNC_SPI0_MO>,
+ <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_1: spi1{
+ pins_spi{
+ pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+ <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+ <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+ <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_2: spi2{
+ pins_spi{
+ pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+ <PINMUX_GPIO1__FUNC_SPI2_MO>,
+ <PINMUX_GPIO2__FUNC_SPI2_CLK>,
+ <PINMUX_GPIO94__FUNC_SPI2_MI>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_3: spi3{
+ pins_spi{
+ pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+ <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+ <PINMUX_GPIO23__FUNC_SPI3_MO>,
+ <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_4: spi4{
+ pins_spi{
+ pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+ <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+ <PINMUX_GPIO19__FUNC_SPI4_MO>,
+ <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+ bias-disable;
+ };
+ };
+
+ spi_pins_5: spi5{
+ pins_spi{
+ pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+ <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+ <PINMUX_GPIO15__FUNC_SPI5_MO>,
+ <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+ bias-disable;
+ };
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_0>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_1>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_2>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
+&spi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_3>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
+&spi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_4>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+};
+
+&spi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_pins_5>;
+ mediatek,pad-select = <0>;
+ status = "okay";
+
+};
+
+&uart0 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
new file mode 100644
index 000000000000..c2749c4631bc
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -0,0 +1,447 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ * Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/clock/mt8183-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "mt8183-pinfunc.h"
+
+/ {
+ compatible = "mediatek,mt8183";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x000>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <741>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x001>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <741>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x002>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <741>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x003>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <741>;
+ };
+
+ cpu4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x100>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x101>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x102>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ };
+
+ cpu7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a73";
+ reg = <0x103>;
+ enable-method = "psci";
+ capacity-dmips-mhz = <1024>;
+ };
+ };
+
+ pmu-a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
+ };
+
+ pmu-a73 {
+ compatible = "arm,cortex-a73-pmu";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ clk26m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ soc_data: soc_data@8000000 {
+ compatible = "mediatek,mt8183-efuse",
+ "mediatek,efuse";
+ reg = <0 0x08000000 0 0x0010>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x40000>, /* GICD */
+ <0 0x0c100000 0 0x200000>, /* GICR */
+ <0 0x0c400000 0 0x2000>, /* GICC */
+ <0 0x0c410000 0 0x1000>, /* GICH */
+ <0 0x0c420000 0 0x2000>; /* GICV */
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ ppi-partitions {
+ ppi_cluster0: interrupt-partition-0 {
+ affinity = <&cpu0 &cpu1 &cpu2 &cpu3>;
+ };
+ ppi_cluster1: interrupt-partition-1 {
+ affinity = <&cpu4 &cpu5 &cpu6 &cpu7>;
+ };
+ };
+ };
+
+ mcucfg: syscon@c530000 {
+ compatible = "mediatek,mt8183-mcucfg", "syscon";
+ reg = <0 0x0c530000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ sysirq: interrupt-controller@c530a80 {
+ compatible = "mediatek,mt8183-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x0c530a80 0 0x50>;
+ };
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8183-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@10001000 {
+ compatible = "mediatek,mt8183-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8183-pinctrl";
+ reg = <0 0x10005000 0 0x1000>,
+ <0 0x11f20000 0 0x1000>,
+ <0 0x11e80000 0 0x1000>,
+ <0 0x11e70000 0 0x1000>,
+ <0 0x11e90000 0 0x1000>,
+ <0 0x11d30000 0 0x1000>,
+ <0 0x11d20000 0 0x1000>,
+ <0 0x11c50000 0 0x1000>,
+ <0 0x11f30000 0 0x1000>,
+ <0 0x1000b000 0 0x1000>;
+ reg-names = "iocfg0", "iocfg1", "iocfg2",
+ "iocfg3", "iocfg4", "iocfg5",
+ "iocfg6", "iocfg7", "iocfg8",
+ "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 192>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8183-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pwrap: pwrap@1000d000 {
+ compatible = "mediatek,mt8183-pwrap";
+ reg = <0 0x1000d000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_MUX_PMICSPI>,
+ <&infracfg CLK_INFRA_PMIC_AP>;
+ clock-names = "spi", "wrap";
+ };
+
+ auxadc: auxadc@11001000 {
+ compatible = "mediatek,mt8183-auxadc",
+ "mediatek,mt8173-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8183-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8183-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x1000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8183-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x1000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>;
+ clock-names = "baud", "bus";
+ status = "disabled";
+ };
+
+ spi0: spi@1100a000 {
+ compatible = "mediatek,mt8183-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x1000>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+ <&topckgen CLK_TOP_MUX_SPI>,
+ <&infracfg CLK_INFRA_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi1: spi@11010000 {
+ compatible = "mediatek,mt8183-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11010000 0 0x1000>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+ <&topckgen CLK_TOP_MUX_SPI>,
+ <&infracfg CLK_INFRA_SPI1>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi2: spi@11012000 {
+ compatible = "mediatek,mt8183-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11012000 0 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+ <&topckgen CLK_TOP_MUX_SPI>,
+ <&infracfg CLK_INFRA_SPI2>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi3: spi@11013000 {
+ compatible = "mediatek,mt8183-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11013000 0 0x1000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+ <&topckgen CLK_TOP_MUX_SPI>,
+ <&infracfg CLK_INFRA_SPI3>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi4: spi@11018000 {
+ compatible = "mediatek,mt8183-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11018000 0 0x1000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+ <&topckgen CLK_TOP_MUX_SPI>,
+ <&infracfg CLK_INFRA_SPI4>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ spi5: spi@11019000 {
+ compatible = "mediatek,mt8183-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x11019000 0 0x1000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>,
+ <&topckgen CLK_TOP_MUX_SPI>,
+ <&infracfg CLK_INFRA_SPI5>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ audiosys: syscon@11220000 {
+ compatible = "mediatek,mt8183-audiosys", "syscon";
+ reg = <0 0x11220000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ efuse: efuse@11f10000 {
+ compatible = "mediatek,mt8183-efuse",
+ "mediatek,efuse";
+ reg = <0 0x11f10000 0 0x1000>;
+ };
+
+ mfgcfg: syscon@13000000 {
+ compatible = "mediatek,mt8183-mfgcfg", "syscon";
+ reg = <0 0x13000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt8183-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ imgsys: syscon@15020000 {
+ compatible = "mediatek,mt8183-imgsys", "syscon";
+ reg = <0 0x15020000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt8183-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: syscon@17000000 {
+ compatible = "mediatek,mt8183-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_conn: syscon@19000000 {
+ compatible = "mediatek,mt8183-ipu_conn", "syscon";
+ reg = <0 0x19000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_adl: syscon@19010000 {
+ compatible = "mediatek,mt8183-ipu_adl", "syscon";
+ reg = <0 0x19010000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_core0: syscon@19180000 {
+ compatible = "mediatek,mt8183-ipu_core0", "syscon";
+ reg = <0 0x19180000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ ipu_core1: syscon@19280000 {
+ compatible = "mediatek,mt8183-ipu_core1", "syscon";
+ reg = <0 0x19280000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys: syscon@1a000000 {
+ compatible = "mediatek,mt8183-camsys", "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 14d7fea82daf..bdace01561ba 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -7,18 +7,70 @@
#include "tegra186-p3310.dtsi"
/ {
- model = "NVIDIA Tegra186 P2771-0000 Development Board";
+ model = "NVIDIA Jetson TX2 Developer Kit";
compatible = "nvidia,p2771-0000", "nvidia,tegra186";
+ aconnect {
+ status = "okay";
+
+ dma-controller@2930000 {
+ status = "okay";
+ };
+
+ interrupt-controller@2a40000 {
+ status = "okay";
+ };
+ };
+
i2c@3160000 {
power-monitor@42 {
compatible = "ti,ina3221";
reg = <0x42>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_MUX";
+ shunt-resistor-micro-ohms = <20000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_5V0_IO_SYS";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_3V3_SYS";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
power-monitor@43 {
compatible = "ti,ina3221";
reg = <0x43>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_3V3_IO_SLP";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_1V8_IO";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_M2_IN";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
exp1: gpio@74 {
@@ -31,6 +83,8 @@
#gpio-cells = <2>;
gpio-controller;
+
+ vcc-supply = <&vdd_3v3_sys>;
};
exp2: gpio@77 {
@@ -43,6 +97,8 @@
#gpio-cells = <2>;
gpio-controller;
+
+ vcc-supply = <&vdd_1v8>;
};
};
@@ -145,6 +201,19 @@
phy-names = "usb2-0", "usb2-1", "usb3-0";
};
+ i2c@c250000 {
+ /* carrier board ID EEPROM */
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
pcie@10003000 {
status = "okay";
@@ -278,7 +347,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
@@ -292,7 +361,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_5v0_sys>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 64686b033c38..5e18acf5cfad 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -4,7 +4,7 @@
#include <dt-bindings/mfd/max77620.h>
/ {
- model = "NVIDIA Tegra186 P3310 Processor Module";
+ model = "NVIDIA Jetson TX2";
compatible = "nvidia,p3310", "nvidia,tegra186";
aliases {
@@ -67,11 +67,51 @@
power-monitor@40 {
compatible = "ti,ina3221";
reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_SYS_GPU";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_SYS_SOC";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_3V8_WIFI";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
power-monitor@41 {
compatible = "ti,ina3221";
reg = <0x41>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@0 {
+ reg = <0x0>;
+ label = "VDD_IN";
+ shunt-resistor-micro-ohms = <5000>;
+ };
+
+ channel@1 {
+ reg = <0x1>;
+ label = "VDD_SYS_CPU";
+ shunt-resistor-micro-ohms = <10000>;
+ };
+
+ channel@2 {
+ reg = <0x2>;
+ label = "VDD_5V0_DDR";
+ shunt-resistor-micro-ohms = <10000>;
+ };
};
};
@@ -124,6 +164,17 @@
i2c@c250000 {
status = "okay";
+
+ /* module ID EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ read-only;
+ };
};
rtc@c2a0000 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 426ac0bdf6a6..47cd831fcf44 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -70,6 +70,75 @@
snps,rxpbl = <8>;
};
+ aconnect {
+ compatible = "nvidia,tegra186-aconnect",
+ "nvidia,tegra210-aconnect";
+ clocks = <&bpmp TEGRA186_CLK_APE>,
+ <&bpmp TEGRA186_CLK_APB2APE>;
+ clock-names = "ape", "apb2ape";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x02900000 0x0 0x02900000 0x200000>;
+ status = "disabled";
+
+ dma-controller@2930000 {
+ compatible = "nvidia,tegra186-adma";
+ reg = <0x02930000 0x20000>;
+ interrupt-parent = <&agic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&bpmp TEGRA186_CLK_AHUB>;
+ clock-names = "d_audio";
+ status = "disabled";
+ };
+
+ agic: interrupt-controller@2a40000 {
+ compatible = "nvidia,tegra186-agic",
+ "nvidia,tegra210-agic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x02a41000 0x1000>,
+ <0x02a42000 0x2000>;
+ interrupts = <GIC_SPI 145
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&bpmp TEGRA186_CLK_APE>;
+ clock-names = "clk";
+ status = "disabled";
+ };
+ };
+
memory-controller@2c00000 {
compatible = "nvidia,tegra186-mc";
reg = <0x0 0x02c00000 0x0 0xb0000>;
@@ -173,6 +242,9 @@
clock-names = "div-clk";
resets = <&bpmp TEGRA186_RESET_I2C4>;
reset-names = "i2c";
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&state_dpaux1_i2c>;
+ pinctrl-1 = <&state_dpaux1_off>;
status = "disabled";
};
@@ -201,6 +273,9 @@
clock-names = "div-clk";
resets = <&bpmp TEGRA186_RESET_I2C6>;
reset-names = "i2c";
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&state_dpaux_i2c>;
+ pinctrl-1 = <&state_dpaux_off>;
status = "disabled";
};
@@ -1121,6 +1196,30 @@
};
};
+ bpmp: bpmp {
+ compatible = "nvidia,tegra186-bpmp";
+ iommus = <&smmu TEGRA186_SID_BPMP>;
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+ TEGRA_HSP_DB_MASTER_BPMP>;
+ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ bpmp_i2c: i2c {
+ compatible = "nvidia,tegra186-bpmp-i2c";
+ nvidia,bpmp-bus-id = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bpmp_thermal: thermal {
+ compatible = "nvidia,tegra186-bpmp-thermal";
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -1128,61 +1227,97 @@
cpu@0 {
compatible = "nvidia,tegra186-denver";
device_type = "cpu";
+ i-cache-size = <0x20000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <512>;
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_DENVER>;
reg = <0x000>;
};
cpu@1 {
compatible = "nvidia,tegra186-denver";
device_type = "cpu";
+ i-cache-size = <0x20000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <512>;
+ d-cache-size = <0x10000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_DENVER>;
reg = <0x001>;
};
cpu@2 {
compatible = "arm,cortex-a57";
device_type = "cpu";
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_A57>;
reg = <0x100>;
};
cpu@3 {
compatible = "arm,cortex-a57";
device_type = "cpu";
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_A57>;
reg = <0x101>;
};
cpu@4 {
compatible = "arm,cortex-a57";
device_type = "cpu";
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_A57>;
reg = <0x102>;
};
cpu@5 {
compatible = "arm,cortex-a57";
device_type = "cpu";
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <256>;
+ next-level-cache = <&L2_A57>;
reg = <0x103>;
};
- };
- bpmp: bpmp {
- compatible = "nvidia,tegra186-bpmp";
- iommus = <&smmu TEGRA186_SID_BPMP>;
- mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
- TEGRA_HSP_DB_MASTER_BPMP>;
- shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
-
- bpmp_i2c: i2c {
- compatible = "nvidia,tegra186-bpmp-i2c";
- nvidia,bpmp-bus-id = <5>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ L2_DENVER: l2-cache0 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
};
- bpmp_thermal: thermal {
- compatible = "nvidia,tegra186-bpmp-thermal";
- #thermal-sensor-cells = <1>;
+ L2_A57: l2-cache1 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ cache-size = <0x200000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
};
};
@@ -1294,5 +1429,6 @@
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
+ always-on;
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 0fd5bd29fbf9..62e07e1197cc 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -4,7 +4,7 @@
#include <dt-bindings/mfd/max77620.h>
/ {
- model = "NVIDIA Tegra194 P2888 Processor Module";
+ model = "NVIDIA Jetson AGX Xavier";
compatible = "nvidia,p2888", "nvidia,tegra194";
aliases {
@@ -191,7 +191,7 @@
regulator-boot-on;
};
- sd3 {
+ vdd_1v8ao: sd3 {
regulator-name = "VDD_1V8AO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index 73801b48d1d8..23597d53c9c9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -7,10 +7,22 @@
#include "tegra194-p2888.dtsi"
/ {
- model = "NVIDIA Jetson AGX Xavier Development Kit";
+ model = "NVIDIA Jetson AGX Xavier Developer Kit";
compatible = "nvidia,p2972-0000", "nvidia,tegra194";
cbb {
+ aconnect {
+ status = "okay";
+
+ dma-controller@2930000 {
+ status = "okay";
+ };
+
+ interrupt-controller@2a40000 {
+ status = "okay";
+ };
+ };
+
ddc: i2c@31c0000 {
status = "okay";
};
@@ -52,6 +64,47 @@
};
};
+ pcie@14100000 {
+ status = "okay";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ phys = <&p2u_hsio_0>;
+ phy-names = "p2u-0";
+ };
+
+ pcie@14140000 {
+ status = "okay";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ phys = <&p2u_hsio_7>;
+ phy-names = "p2u-0";
+ };
+
+ pcie@14180000 {
+ status = "okay";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>,
+ <&p2u_hsio_5>;
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+ };
+
+ pcie@141a0000 {
+ status = "disabled";
+
+ vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+ phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+ <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+ <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+ "p2u-5", "p2u-6", "p2u-7";
+ };
+
fan: fan {
compatible = "pwm-fan";
pwms = <&pwm4 0 45334>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index c77ca211fa8f..adebbbf36bd0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -59,6 +59,77 @@
snps,rxpbl = <8>;
};
+ aconnect {
+ compatible = "nvidia,tegra194-aconnect",
+ "nvidia,tegra210-aconnect";
+ clocks = <&bpmp TEGRA194_CLK_APE>,
+ <&bpmp TEGRA194_CLK_APB2APE>;
+ clock-names = "ape", "apb2ape";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x02900000 0x02900000 0x200000>;
+ status = "disabled";
+
+ dma-controller@2930000 {
+ compatible = "nvidia,tegra194-adma",
+ "nvidia,tegra186-adma";
+ reg = <0x02930000 0x20000>;
+ interrupt-parent = <&agic>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&bpmp TEGRA194_CLK_AHUB>;
+ clock-names = "d_audio";
+ status = "disabled";
+ };
+
+ agic: interrupt-controller@2a40000 {
+ compatible = "nvidia,tegra194-agic",
+ "nvidia,tegra210-agic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x02a41000 0x1000>,
+ <0x02a42000 0x2000>;
+ interrupts = <GIC_SPI 145
+ (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&bpmp TEGRA194_CLK_APE>;
+ clock-names = "clk";
+ status = "disabled";
+ };
+ };
+
uarta: serial@3100000 {
compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart";
reg = <0x03100000 0x40>;
@@ -423,6 +494,166 @@
#mbox-cells = <2>;
};
+ p2u_hsio_0: phy@3e10000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e10000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_1: phy@3e20000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e20000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_2: phy@3e30000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e30000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_3: phy@3e40000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e40000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_4: phy@3e50000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e50000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_5: phy@3e60000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e60000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_6: phy@3e70000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e70000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_7: phy@3e80000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e80000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_8: phy@3e90000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03e90000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_9: phy@3ea0000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03ea0000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_0: phy@3eb0000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03eb0000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_1: phy@3ec0000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03ec0000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_2: phy@3ed0000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03ed0000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_3: phy@3ee0000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03ee0000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_4: phy@3ef0000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03ef0000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_5: phy@3f00000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03f00000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_6: phy@3f10000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03f10000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_nvhs_7: phy@3f20000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03f20000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_10: phy@3f30000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03f30000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
+ p2u_hsio_11: phy@3f40000 {
+ compatible = "nvidia,tegra194-p2u";
+ reg = <0x03f40000 0x10000>;
+ reg-names = "ctl";
+
+ #phy-cells = <0>;
+ };
+
hsp_aon: hsp@c150000 {
compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
reg = <0x0c150000 0xa0000>;
@@ -886,6 +1117,283 @@
};
};
+ pcie@14100000 {
+ compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+ reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */
+ 0x00 0x30040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ linux,pci-domain = <1>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_1>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 1>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */
+ 0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */
+ 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+ };
+
+ pcie@14120000 {
+ compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+ reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */
+ 0x00 0x32040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ linux,pci-domain = <2>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_2>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 2>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */
+ 0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */
+ 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+ };
+
+ pcie@14140000 {
+ compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
+ reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */
+ 0x00 0x34040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <1>;
+ num-viewport = <8>;
+ linux,pci-domain = <3>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_3>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 3>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */
+ 0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */
+ 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+ };
+
+ pcie@14160000 {
+ compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
+ reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */
+ 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ num-viewport = <8>;
+ linux,pci-domain = <4>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 4>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */
+ 0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */
+ 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+ };
+
+ pcie@14180000 {
+ compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
+ reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */
+ 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <8>;
+ num-viewport = <8>;
+ linux,pci-domain = <0>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>,
+ <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 0>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */
+ 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */
+ 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+ };
+
+ pcie@141a0000 {
+ compatible = "nvidia,tegra194-pcie", "snps,dw-pcie";
+ power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
+ reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */
+ 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */
+ 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */
+ 0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <8>;
+ num-viewport = <8>;
+ linux,pci-domain = <5>;
+
+ clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>,
+ <&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
+ clock-names = "core", "core_m";
+
+ resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
+ <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ nvidia,bpmp = <&bpmp 5>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+
+ supports-clkreq;
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */
+ 0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */
+ 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+ };
+
sysram@40000000 {
compatible = "nvidia,tegra194-sysram", "mmio-sram";
reg = <0x0 0x40000000 0x0 0x50000>;
@@ -1053,5 +1561,6 @@
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
+ always-on;
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 4dcd0d36189a..27723829d033 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -264,6 +264,19 @@
};
};
+ i2c@7000c500 {
+ /* module ID EEPROM */
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
pmc@7000e400 {
nvidia,invert-interrupt;
};
@@ -328,7 +341,8 @@
regulator-max-microvolt = <1320000>;
enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
regulator-ramp-delay = <80>;
- regulator-enable-ramp-delay = <1000>;
+ regulator-enable-ramp-delay = <2000>;
+ regulator-settling-time-us = <160>;
};
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index 5a57396b5948..a3cafe39ba4c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -79,6 +79,19 @@
};
};
+ i2c@7000c500 {
+ /* carrier board ID EEPROM */
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
clock@70110000 {
status = "okay";
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 5d0181908f45..9d17ec707bce 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -88,6 +88,35 @@
status = "okay";
};
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ read-only;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c02";
+ reg = <0x57>;
+
+ address-bits = <8>;
+ page-size = <8>;
+ size = <256>;
+ read-only;
+ };
+ };
+
hdmi_ddc: i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
@@ -515,6 +544,12 @@
cpu@3 {
enable-method = "psci";
};
+
+ idle-states {
+ cpu-sleep {
+ status = "okay";
+ };
+ };
};
gpio-keys {
@@ -633,17 +668,16 @@
};
vdd_gpu: regulator@6 {
- compatible = "regulator-fixed";
+ compatible = "pwm-regulator";
reg = <6>;
-
+ pwms = <&pwm 1 4880>;
regulator-name = "VDD_GPU";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-enable-ramp-delay = <250>;
-
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
+ regulator-min-microvolt = <710000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-ramp-delay = <80>;
+ regulator-enable-ramp-delay = <2000>;
+ regulator-settling-time-us = <160>;
+ enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
vin-supply = <&vdd_5v0_sys>;
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index a550c0a4d572..659753118e96 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -48,6 +48,11 @@
<&tegra_car 72>,
<&tegra_car 74>;
reset-names = "pex", "afi", "pcie_x";
+
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&pex_dpd_disable>;
+ pinctrl-1 = <&pex_dpd_enable>;
+
status = "disabled";
pci@1,0 {
@@ -848,6 +853,20 @@
pins = "sdmmc3";
power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
};
+
+ pex_dpd_disable: pex_en {
+ pex-dpd-disable {
+ pins = "pex-bias", "pex-clk1", "pex-clk2";
+ low-power-disable;
+ };
+ };
+
+ pex_dpd_enable: pex_dis {
+ pex-dpd-enable {
+ pins = "pex-bias", "pex-clk1", "pex-clk2";
+ low-power-enable;
+ };
+ };
};
fuse@7000f800 {
@@ -1258,7 +1277,7 @@
compatible = "nvidia,tegra210-agic";
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x702f9000 0x2000>,
+ reg = <0x702f9000 0x1000>,
<0x702fa000 0x2000>;
interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&tegra_car TEGRA210_CLK_APE>;
@@ -1430,6 +1449,7 @@
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
interrupt-parent = <&gic>;
+ arm,no-tick-in-suspend;
};
soctherm: thermal-sensor@700e2000 {
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 21d548f02d39..0a7e5dfce6f7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -7,6 +7,10 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index dacd465fc62e..5ea9fb8f2f87 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -102,7 +102,7 @@
reg = <0x0>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -114,7 +114,7 @@
reg = <0x1>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -126,7 +126,7 @@
reg = <0x2>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -138,7 +138,7 @@
reg = <0x3>;
next-level-cache = <&L2_0>;
enable-method = "psci";
- cpu-idle-states = <&CPU_SPC>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
clocks = <&apcs>;
operating-points-v2 = <&cpu_opp_table>;
#cooling-cells = <2>;
@@ -150,8 +150,11 @@
};
idle-states {
- CPU_SPC: spc {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
arm,psci-suspend-param = <0x40000002>;
entry-latency-us = <130>;
exit-latency-us = <150>;
@@ -1164,7 +1167,7 @@
};
funnel@821000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x821000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
@@ -1277,7 +1280,7 @@
};
funnel@841000 { /* APSS funnel only 4 inputs are used */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x841000 0x1000>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 942465d8aeb7..96c0a481f454 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -94,6 +94,8 @@
compatible = "qcom,kryo";
reg = <0x0 0x0>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
@@ -106,6 +108,8 @@
compatible = "qcom,kryo";
reg = <0x0 0x1>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_0>;
};
@@ -114,6 +118,8 @@
compatible = "qcom,kryo";
reg = <0x0 0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "cache";
@@ -126,6 +132,8 @@
compatible = "qcom,kryo";
reg = <0x0 0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
next-level-cache = <&L2_1>;
};
@@ -150,6 +158,19 @@
};
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
+ arm,psci-suspend-param = <0x00000004>;
+ entry-latency-us = <130>;
+ exit-latency-us = <80>;
+ min-residency-us = <300>;
+ };
+ };
};
thermal-zones {
@@ -846,10 +867,11 @@
clock-names = "ref_clk_src", "ref_clk";
clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
<&gcc GCC_UFS_CLKREF_CLK>;
+ resets = <&ufshc 0>;
status = "disabled";
};
- ufshc@624000 {
+ ufshc: ufshc@624000 {
compatible = "qcom,ufshc";
reg = <0x624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
@@ -905,6 +927,7 @@
<0 0>;
lanes-per-direction = <1>;
+ #reset-cells = <1>;
status = "disabled";
ufs_variant {
@@ -1154,7 +1177,6 @@
clock-names = "iface",
"bus";
#iommu-cells = <1>;
- status = "disabled";
};
camss: camss@a00000 {
@@ -1307,8 +1329,6 @@
clock-names = "iface", "bus";
power-domains = <&mmcc GPU_GDSC>;
-
- status = "disabled";
};
mdp_smmu: arm,smmu@d00000 {
@@ -1325,8 +1345,6 @@
clock-names = "iface", "bus";
power-domains = <&mmcc MDSS_GDSC>;
-
- status = "disabled";
};
lpass_q6_smmu: arm,smmu-lpass_q6@1600000 {
@@ -1353,7 +1371,6 @@
clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
<&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
clock-names = "iface", "bus";
- status = "disabled";
};
agnoc@0 {
@@ -1674,7 +1691,7 @@
#interrupt-cells = <1>;
clocks = <&mmcc MDSS_AHB_CLK>;
- clock-names = "iface_clk";
+ clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
@@ -1693,11 +1710,11 @@
<&mmcc MDSS_MDP_CLK>,
<&mmcc SMMU_MDP_AXI_CLK>,
<&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface_clk",
- "bus_clk",
- "core_clk",
- "iommu_clk",
- "vsync_clk";
+ clock-names = "iface",
+ "bus",
+ "core",
+ "iommu",
+ "vsync";
iommus = <&mdp_smmu 0>;
@@ -1732,11 +1749,11 @@
<&mmcc MDSS_HDMI_AHB_CLK>,
<&mmcc MDSS_EXTPCLK_CLK>;
clock-names =
- "mdp_core_clk",
- "iface_clk",
- "core_clk",
- "alt_iface_clk",
- "extp_clk";
+ "mdp_core",
+ "iface",
+ "core",
+ "alt_iface",
+ "extp";
phys = <&hdmi_phy>;
phy-names = "hdmi_phy";
@@ -1773,8 +1790,8 @@
clocks = <&mmcc MDSS_AHB_CLK>,
<&gcc GCC_HDMI_CLKREF_CLK>;
- clock-names = "iface_clk",
- "ref_clk";
+ clock-names = "iface",
+ "ref";
};
};
};
@@ -1814,7 +1831,7 @@
power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
compatible = "qcom,apr-v2";
qcom,smd-channels = "apr_audio_svc";
- reg = <APR_DOMAIN_ADSP>;
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 574be78a936e..c13ed7aeb1e0 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -4,6 +4,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8998.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
/ {
@@ -78,6 +79,7 @@
compatible = "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "arm,arch-cache";
@@ -96,6 +98,7 @@
compatible = "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_1: l1-icache {
compatible = "arm,arch-cache";
@@ -110,6 +113,7 @@
compatible = "arm,armv8";
reg = <0x0 0x2>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_2: l1-icache {
compatible = "arm,arch-cache";
@@ -124,6 +128,7 @@
compatible = "arm,armv8";
reg = <0x0 0x3>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
next-level-cache = <&L2_0>;
L1_I_3: l1-icache {
compatible = "arm,arch-cache";
@@ -138,6 +143,7 @@
compatible = "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
compatible = "arm,arch-cache";
@@ -156,6 +162,7 @@
compatible = "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_101: l1-icache {
compatible = "arm,arch-cache";
@@ -170,6 +177,7 @@
compatible = "arm,armv8";
reg = <0x0 0x102>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_102: l1-icache {
compatible = "arm,arch-cache";
@@ -184,6 +192,7 @@
compatible = "arm,armv8";
reg = <0x0 0x103>;
enable-method = "psci";
+ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
next-level-cache = <&L2_1>;
L1_I_103: l1-icache {
compatible = "arm,arch-cache";
@@ -230,6 +239,48 @@
};
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-retention";
+ arm,psci-suspend-param = <0x00000002>;
+ entry-latency-us = <81>;
+ exit-latency-us = <86>;
+ min-residency-us = <200>;
+ };
+
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <273>;
+ exit-latency-us = <612>;
+ min-residency-us = <1000>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-retention";
+ arm,psci-suspend-param = <0x00000002>;
+ entry-latency-us = <79>;
+ exit-latency-us = <82>;
+ min-residency-us = <200>;
+ };
+
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <336>;
+ exit-latency-us = <525>;
+ min-residency-us = <1000>;
+ local-timer-stop;
+ };
+ };
};
firmware {
@@ -264,6 +315,56 @@
compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc";
#clock-cells = <1>;
};
+
+ rpmpd: power-controller {
+ compatible = "qcom,msm8998-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <16>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <32>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <48>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <64>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <128>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <192>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <256>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <320>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <384>;
+ };
+
+ rpmpd_opp_turbo_plus: opp10 {
+ opp-level = <512>;
+ };
+ };
+ };
};
};
@@ -758,6 +859,90 @@
#thermal-sensor-cells = <1>;
};
+ anoc1_smmu: iommu@1680000 {
+ compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+ reg = <0x01680000 0x10000>;
+ #iommu-cells = <1>;
+
+ #global-interrupts = <0>;
+ interrupts =
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie0: pci@1c00000 {
+ compatible = "qcom,pcie-msm8996";
+ reg = <0x01c00000 0x2000>,
+ <0x1b000000 0xf1d>,
+ <0x1b000f20 0xa8>,
+ <0x1b100000 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ num-lanes = <1>;
+ phys = <&pciephy>;
+ phy-names = "pciephy";
+
+ ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
+ <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
+
+ #interrupt-cells = <1>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>;
+ clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+ iommu-map = <0x100 &anoc1_smmu 0x1480 1>;
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ };
+
+ phy@1c06000 {
+ compatible = "qcom,msm8998-qmp-pcie-phy";
+ reg = <0x01c06000 0x18c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
+ reset-names = "phy", "common";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+
+ pciephy: lane@1c06800 {
+ reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "pcie_0_pipe_clk_src";
+ #clock-cells = <0>;
+ };
+ };
+
tcsr_mutex_regs: syscon@1f40000 {
compatible = "syscon";
reg = <0x1f40000 0x20000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8998.dtsi b/arch/arm64/boot/dts/qcom/pm8998.dtsi
index d3ca35a940fb..051a52df80f9 100644
--- a/arch/arm64/boot/dts/qcom/pm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8998.dtsi
@@ -39,7 +39,7 @@
#size-cells = <0>;
pm8998_pon: pon@800 {
- compatible = "qcom,pm8916-pon";
+ compatible = "qcom,pm8998-pon";
reg = <0x800>;
mode-bootloader = <0x2>;
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index e8e186bc1ea7..14240fedd916 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -98,7 +98,7 @@
qcom,pre-scaling = <1 1>;
};
- vph_pwr {
+ pon_1: vph_pwr {
reg = <ADC5_VPH_PWR>;
qcom,pre-scaling = <1 3>;
};
@@ -108,18 +108,24 @@
qcom,pre-scaling = <1 1>;
};
- xo_therm_100k_pu {
- reg = <ADC5_XO_THERM_100K_PU>;
+ pa_therm1: thermistor1 {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
- amux_thm1_100k_pu {
- reg = <ADC5_AMUX_THM1_100K_PU>;
+ pa_therm3: thermistor3 {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
- amux_thm3_100k_pu {
- reg = <ADC5_AMUX_THM3_100K_PU>;
+ xo_therm: xo_temp {
+ reg = <ADC5_XO_THERM_100K_PU>;
+ qcom,ratiometric;
+ qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
index 2c3127167e3c..11c0a7137823 100644
--- a/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404-evb.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
+#include <dt-bindings/gpio/gpio.h>
#include "qcs404.dtsi"
#include "pms405.dtsi"
@@ -56,18 +57,41 @@
qcom,controlled-remotely;
};
+&gcc {
+ protected-clocks = <GCC_BIMC_CDSP_CLK>,
+ <GCC_CDSP_CFG_AHB_CLK>,
+ <GCC_CDSP_BIMC_CLK_SRC>,
+ <GCC_CDSP_TBU_CLK>;
+};
+
&pms405_spmi_regulators {
- vdd_s3-supply = <&pms405_s3>;
+ vdd_s3-supply = <&vph_pwr>;
pms405_s3: s3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vdd_apc";
regulator-min-microvolt = <1048000>;
- regulator-max-microvolt = <1352000>;
+ regulator-max-microvolt = <1384000>;
};
};
+&pcie {
+ status = "ok";
+
+ perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&perst_state>;
+};
+
+&pcie_phy {
+ status = "ok";
+
+ vdda-vp-supply = <&vreg_l3_1p05>;
+ vdda-vph-supply = <&vreg_l5_1p8>;
+};
+
&remoteproc_adsp {
status = "ok";
};
@@ -118,7 +142,7 @@
};
vreg_l3_1p05: l3 {
- regulator-min-microvolt = <1050000>;
+ regulator-min-microvolt = <1048000>;
regulator-max-microvolt = <1160000>;
};
@@ -184,6 +208,15 @@
};
&tlmm {
+ perst_state: perst {
+ pins = "gpio43";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
sdc1_on: sdc1-on {
clk {
pins = "sdc1_clk";
@@ -200,7 +233,7 @@
data {
pins = "sdc1_data";
bias-pull-up;
- dreive-strength = <10>;
+ drive-strength = <10>;
};
rclk {
@@ -225,7 +258,7 @@
data {
pins = "sdc1_data";
bias-pull-up;
- dreive-strength = <2>;
+ drive-strength = <2>;
};
rclk {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index ffedf9640af7..3d0789775009 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -3,7 +3,10 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+#include <dt-bindings/clock/qcom,turingcc-qcs404.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -30,7 +33,9 @@
compatible = "arm,cortex-a53";
reg = <0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
};
CPU1: cpu@101 {
@@ -38,7 +43,9 @@
compatible = "arm,cortex-a53";
reg = <0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
};
CPU2: cpu@102 {
@@ -46,7 +53,9 @@
compatible = "arm,cortex-a53";
reg = <0x102>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
};
CPU3: cpu@103 {
@@ -54,13 +63,29 @@
compatible = "arm,cortex-a53";
reg = <0x103>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
next-level-cache = <&L2_0>;
+ #cooling-cells = <2>;
};
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <125>;
+ exit-latency-us = <180>;
+ min-residency-us = <595>;
+ local-timer-stop;
+ };
+ };
};
firmware {
@@ -81,99 +106,6 @@
method = "smc";
};
- remoteproc_adsp: remoteproc-adsp {
- compatible = "qcom,qcs404-adsp-pas";
-
- interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&adsp_fw_mem>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <2>;
- mboxes = <&apcs_glb 8>;
-
- label = "adsp";
- };
- };
-
- remoteproc_cdsp: remoteproc-cdsp {
- compatible = "qcom,qcs404-cdsp-pas";
-
- interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&cdsp_fw_mem>;
-
- qcom,smem-states = <&cdsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <5>;
- mboxes = <&apcs_glb 12>;
-
- label = "cdsp";
- };
- };
-
- remoteproc_wcss: remoteproc-wcss {
- compatible = "qcom,qcs404-wcss-pas";
-
- interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&wlan_fw_mem>;
-
- qcom,smem-states = <&wcss_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- status = "disabled";
-
- glink-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- qcom,remote-pid = <1>;
- mboxes = <&apcs_glb 16>;
-
- label = "wcss";
- };
- };
-
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -230,6 +162,60 @@
compatible = "qcom,rpmcc-qcs404";
#clock-cells = <1>;
};
+
+ rpmpd: power-controller {
+ compatible = "qcom,qcs404-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <16>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <32>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <48>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <64>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <128>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <192>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <256>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <320>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <384>;
+ };
+
+ rpmpd_opp_turbo_no_cpr: opp10 {
+ opp-level = <416>;
+ };
+
+ rpmpd_opp_turbo_plus: opp11 {
+ opp-level = <512>;
+ };
+ };
+ };
};
};
@@ -254,11 +240,32 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ turingcc: clock-controller@800000 {
+ compatible = "qcom,qcs404-turingcc";
+ reg = <0x00800000 0x30000>;
+ clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ status = "disabled";
+ };
+
rpm_msg_ram: memory@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x6000>;
};
+ qfprom: qfprom@a4000 {
+ compatible = "qcom,qfprom";
+ reg = <0x000a4000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ tsens_caldata: caldata@d0 {
+ reg = <0x1f8 0x14>;
+ };
+ };
+
rng: rng@e3000 {
compatible = "qcom,prng-ee";
reg = <0x000e3000 0x1000>;
@@ -266,6 +273,67 @@
clock-names = "core";
};
+ tsens: thermal-sensor@4a9000 {
+ compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ nvmem-cells = <&tsens_caldata>;
+ nvmem-cell-names = "calib";
+ #qcom,sensors = <10>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ remoteproc_cdsp: remoteproc@b00000 {
+ compatible = "qcom,qcs404-cdsp-pas";
+ reg = <0x00b00000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>,
+ <&gcc GCC_CDSP_CFG_AHB_CLK>,
+ <&gcc GCC_CDSP_TBU_CLK>,
+ <&gcc GCC_BIMC_CDSP_CLK>,
+ <&turingcc TURING_WRAPPER_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+ <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+ <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+ clock-names = "xo",
+ "sway",
+ "tbu",
+ "bimc",
+ "ahb_aon",
+ "q6ss_slave",
+ "q6ss_master",
+ "q6_axim";
+
+ resets = <&gcc GCC_CDSP_RESTART>;
+ reset-names = "restart";
+
+ qcom,halt-regs = <&tcsr 0x19004>;
+
+ memory-region = <&cdsp_fw_mem>;
+
+ qcom,smem-states = <&cdsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <5>;
+ mboxes = <&apcs_glb 12>;
+
+ label = "cdsp";
+ };
+ };
+
tlmm: pinctrl@1000000 {
compatible = "qcom,qcs404-pinctrl";
reg = <0x01000000 0x200000>,
@@ -383,6 +451,7 @@
compatible = "qcom,gcc-qcs404";
reg = <0x01800000 0x80000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>;
assigned-clock-rates = <19200000>;
@@ -393,6 +462,11 @@
reg = <0x01905000 0x20000>;
};
+ tcsr: syscon@1937000 {
+ compatible = "syscon";
+ reg = <0x01937000 0x25000>;
+ };
+
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x0200f000 0x001000>,
@@ -411,6 +485,53 @@
#interrupt-cells = <4>;
};
+ remoteproc_wcss: remoteproc@7400000 {
+ compatible = "qcom,qcs404-wcss-pas";
+ reg = <0x07400000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&wlan_fw_mem>;
+
+ qcom,smem-states = <&wcss_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 16>;
+
+ label = "wcss";
+ };
+ };
+
+ pcie_phy: phy@7786000 {
+ compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy";
+ reg = <0x07786000 0xb8>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>,
+ <&gcc 21>;
+ reset-names = "phy", "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
sdcc1: sdcc@7804000 {
compatible = "qcom,sdhci-msm-v5";
reg = <0x07804000 0x1000>, <0x7805000 0x1000>;
@@ -796,6 +917,88 @@
status = "disabled";
};
};
+
+ remoteproc_adsp: remoteproc@c700000 {
+ compatible = "qcom,qcs404-adsp-pas";
+ reg = <0x0c700000 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_fw_mem>;
+
+ qcom,smem-states = <&adsp_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
+
+ qcom,remote-pid = <2>;
+ mboxes = <&apcs_glb 8>;
+
+ label = "adsp";
+ };
+ };
+
+ pcie: pci@10000000 {
+ compatible = "qcom,pcie-qcs404", "snps,dw-pcie";
+ reg = <0x10000000 0xf1d>,
+ <0x10000f20 0xa8>,
+ <0x07780000 0x2000>,
+ <0x10001000 0x2000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */
+ <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */
+
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+ clock-names = "iface", "aux", "master_bus", "slave_bus";
+
+ resets = <&gcc 18>,
+ <&gcc 17>,
+ <&gcc 15>,
+ <&gcc 19>,
+ <&gcc GCC_PCIE_0_BCR>,
+ <&gcc 16>;
+ reset-names = "axi_m",
+ "axi_s",
+ "axi_m_sticky",
+ "pipe_sticky",
+ "pwr",
+ "ahb";
+
+ phys = <&pcie_phy>;
+ phy-names = "pciephy";
+
+ status = "disabled";
+ };
};
timer {
@@ -865,4 +1068,251 @@
#interrupt-cells = <2>;
};
};
+
+ thermal-zones {
+ aoss-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ aoss_alert0: trip-point@0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ q6-hvx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ q6_hvx_alert0: trip-point@0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ lpass-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ lpass_alert0: trip-point@0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ wlan-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ wlan_alert0: trip-point@0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ cluster-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cluster_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cluster_alert1: trip-point@1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cluster_crit: cluster_crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cluster_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu0_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu0_alert1: trip-point@1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu0_crit: cpu_crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu1_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu1_alert1: trip-point@1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu1_crit: cpu_crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu2_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu2_alert1: trip-point@1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu2_crit: cpu_crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu3_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ cpu3_alert1: trip-point@1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_crit: cpu_crit {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ gpu_alert0: trip-point@0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
new file mode 100644
index 000000000000..bd7c25bb8d35
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+ model = "Google Cheza (rev1)";
+ compatible = "google,cheza-rev1", "qcom,sdm845";
+
+ /*
+ * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+ */
+
+ /*
+ * NOTE: Technically pp3500_a is not the exact same signal as
+ * pp3500_a_vbob (there's a load switch between them and the EC can
+ * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+ * view they are the same.
+ */
+ pp3500_a:
+ pp3500_a_vbob: pp3500-a-vbob-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob";
+
+ /*
+ * Comes on automatically when pp5000_ldo comes on, which
+ * comes on automatically when ppvar_sys comes on
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_dx_edp: pp3300-dx-edp-regulator {
+ /* Yes, it's really 3.5 despite the name of the signal */
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+
+ vin-supply = <&pp3500_a>;
+ };
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+ /delete-property/regulator-boot-on;
+ /delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+ vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "",
+ "FP_RST_L",
+ "FCAM_EN",
+ "",
+ "EDP_BRIJ_IRQ",
+ "EC_IN_RW_ODL",
+ "",
+ "RCAM_MCLK",
+ "FCAM_MCLK",
+ "",
+ "RCAM_EN",
+ "CCI0_SDA",
+ "CCI0_SCL",
+ "CCI1_SDA",
+ "CCI1_SCL",
+ "FCAM_RST_L",
+ "",
+ "PEN_RST_L",
+ "PEN_IRQ_L",
+ "",
+ "RCAM_VSYNC",
+ "ESIM_MISO",
+ "ESIM_MOSI",
+ "ESIM_CLK",
+ "ESIM_CS_L",
+ "AP_PEN_1V8_SDA",
+ "AP_PEN_1V8_SCL",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "RCAM_RST_L",
+ "",
+ "AP_EDP_BKLTEN",
+ "AP_BRD_ID1",
+ "BOOT_CONFIG_4",
+ "AMP_IRQ_L",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "EN_PP3300_DX_EDP",
+ "SD_CD_ODL",
+ "BT_UART_RTS",
+ "BT_UART_CTS",
+ "BT_UART_RXD",
+ "BT_UART_TXD",
+ "AMP_I2C_SDA",
+ "AMP_I2C_SCL",
+ "AP_BRD_ID3",
+ "",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DOUT",
+ "AMP_DIN",
+ "AP_BRD_ID2",
+ "PEN_PDCT_L",
+ "HP_MCLK",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "",
+ "",
+ "",
+ "",
+ "BT_SLIMBUS_DATA",
+ "BT_SLIMBUS_CLK",
+ "AMP_RESET_L",
+ "",
+ "FCAM_VSYNC",
+ "",
+ "AP_SKU_ID1",
+ "EC_WOV_BCLK",
+ "EC_WOV_LRCLK",
+ "EC_WOV_DOUT",
+ "",
+ "",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "AP_SPI_CS0_L",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ "",
+ "",
+ "AP_SPI_CLK",
+ "",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "BOOT_CONFIG_1",
+ "BOOT_CONFIG_2",
+ "BOOT_CONFIG_0",
+ "EDP_BRIJ_EN",
+ "",
+ "USB_HS_TX_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "AP_SKU_ID2",
+ "SDM_GRFC_8",
+ "SDM_GRFC_9",
+ "AP_RST_REQ",
+ "HP_IRQ",
+ "TS_RESET_L",
+ "PEN_EJECT_ODL",
+ "HUB_RST_L",
+ "FP_TO_AP_IRQ",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "TS_INT_L",
+ "AP_SUSPEND_L",
+ "SDM_GRFC_3",
+ "",
+ "H1_AP_INT_ODL",
+ "QLINK_REQ",
+ "QLINK_EN",
+ "SDM_GRFC_2",
+ "BOOT_CONFIG_3",
+ "WMSS_RESET_L",
+ "SDM_GRFC_0",
+ "SDM_GRFC_1",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK",
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "WCI2_LTE_COEX_RXD",
+ "WCI2_LTE_COEX_TXD",
+ "AP_RAM_ID1",
+ "AP_RAM_ID2",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
new file mode 100644
index 000000000000..2b7230594ecb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+ model = "Google Cheza (rev2)";
+ compatible = "google,cheza-rev2", "qcom,sdm845";
+
+ /*
+ * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
+ */
+
+ /*
+ * NOTE: Technically pp3500_a is not the exact same signal as
+ * pp3500_a_vbob (there's a load switch between them and the EC can
+ * control pp3500_a via "en_pp3300_a"), but from the AP's point of
+ * view they are the same.
+ */
+ pp3500_a:
+ pp3500_a_vbob: pp3500-a-vbob-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bob";
+
+ /*
+ * Comes on automatically when pp5000_ldo comes on, which
+ * comes on automatically when ppvar_sys comes on
+ */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_dx_edp: pp3300-dx-edp-regulator {
+ /* Yes, it's really 3.5 despite the name of the signal */
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+
+ vin-supply = <&pp3500_a>;
+ };
+};
+
+/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
+
+/*
+ * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
+ * that limits them to 3.0, and trying to run at 3.3V with that old firmware
+ * prevents the system from booting.
+ */
+&src_pp3000_l19a {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+};
+
+&src_pp3300_l22a {
+ /delete-property/regulator-boot-on;
+ /delete-property/regulator-always-on;
+};
+
+&src_pp3300_l28a {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+};
+
+&src_vreg_bob {
+ regulator-min-microvolt = <3500000>;
+ regulator-max-microvolt = <3500000>;
+ vin-supply = <&pp3500_a_vbob>;
+};
+
+/*
+ * NON-REGULATOR OVERRIDES
+ * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
+ */
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "BRIJ_SUSPEND",
+ "FP_RST_L",
+ "FCAM_EN",
+ "",
+ "EDP_BRIJ_IRQ",
+ "EC_IN_RW_ODL",
+ "",
+ "RCAM_MCLK",
+ "FCAM_MCLK",
+ "",
+ "RCAM_EN",
+ "CCI0_SDA",
+ "CCI0_SCL",
+ "CCI1_SDA",
+ "CCI1_SCL",
+ "FCAM_RST_L",
+ "FPMCU_BOOT0",
+ "PEN_RST_L",
+ "PEN_IRQ_L",
+ "FPMCU_SEL_OD",
+ "RCAM_VSYNC",
+ "ESIM_MISO",
+ "ESIM_MOSI",
+ "ESIM_CLK",
+ "ESIM_CS_L",
+ "AP_PEN_1V8_SDA",
+ "AP_PEN_1V8_SCL",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "RCAM_RST_L",
+ "",
+ "AP_EDP_BKLTEN",
+ "AP_BRD_ID1",
+ "BOOT_CONFIG_4",
+ "AMP_IRQ_L",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "EN_PP3300_DX_EDP",
+ "SD_CD_ODL",
+ "BT_UART_RTS",
+ "BT_UART_CTS",
+ "BT_UART_RXD",
+ "BT_UART_TXD",
+ "AMP_I2C_SDA",
+ "AMP_I2C_SCL",
+ "AP_BRD_ID3",
+ "",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DOUT",
+ "AMP_DIN",
+ "AP_BRD_ID2",
+ "PEN_PDCT_L",
+ "HP_MCLK",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "",
+ "",
+ "",
+ "",
+ "BT_SLIMBUS_DATA",
+ "BT_SLIMBUS_CLK",
+ "AMP_RESET_L",
+ "",
+ "FCAM_VSYNC",
+ "",
+ "AP_SKU_ID1",
+ "EC_WOV_BCLK",
+ "EC_WOV_LRCLK",
+ "EC_WOV_DOUT",
+ "",
+ "",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "AP_SPI_CS0_L",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ "",
+ "",
+ "AP_SPI_CLK",
+ "",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "BOOT_CONFIG_1",
+ "BOOT_CONFIG_2",
+ "BOOT_CONFIG_0",
+ "EDP_BRIJ_EN",
+ "",
+ "USB_HS_TX_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "AP_SKU_ID2",
+ "SDM_GRFC_8",
+ "SDM_GRFC_9",
+ "AP_RST_REQ",
+ "HP_IRQ",
+ "TS_RESET_L",
+ "PEN_EJECT_ODL",
+ "HUB_RST_L",
+ "FP_TO_AP_IRQ",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "TS_INT_L",
+ "AP_SUSPEND_L",
+ "SDM_GRFC_3",
+ "",
+ "H1_AP_INT_ODL",
+ "QLINK_REQ",
+ "QLINK_EN",
+ "SDM_GRFC_2",
+ "BOOT_CONFIG_3",
+ "WMSS_RESET_L",
+ "SDM_GRFC_0",
+ "SDM_GRFC_1",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK",
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "WCI2_LTE_COEX_RXD",
+ "WCI2_LTE_COEX_TXD",
+ "AP_RAM_ID1",
+ "AP_RAM_ID2",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
new file mode 100644
index 000000000000..1ba67be08f81
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza board device tree source
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sdm845-cheza.dtsi"
+
+/ {
+ model = "Google Cheza (rev3+)";
+ compatible = "google,cheza", "qcom,sdm845";
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&tlmm {
+ gpio-line-names = "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "BRIJ_SUSPEND",
+ "FP_RST_L",
+ "FCAM_EN",
+ "",
+ "EDP_BRIJ_IRQ",
+ "EC_IN_RW_ODL",
+ "",
+ "RCAM_MCLK",
+ "FCAM_MCLK",
+ "",
+ "RCAM_EN",
+ "CCI0_SDA",
+ "CCI0_SCL",
+ "CCI1_SDA",
+ "CCI1_SCL",
+ "FCAM_RST_L",
+ "FPMCU_BOOT0",
+ "PEN_RST_L",
+ "PEN_IRQ_L",
+ "FPMCU_SEL_OD",
+ "RCAM_VSYNC",
+ "ESIM_MISO",
+ "ESIM_MOSI",
+ "ESIM_CLK",
+ "ESIM_CS_L",
+ "AP_PEN_1V8_SDA",
+ "AP_PEN_1V8_SCL",
+ "AP_TS_I2C_SDA",
+ "AP_TS_I2C_SCL",
+ "RCAM_RST_L",
+ "",
+ "AP_EDP_BKLTEN",
+ "AP_BRD_ID0",
+ "BOOT_CONFIG_4",
+ "AMP_IRQ_L",
+ "EDP_BRIJ_I2C_SDA",
+ "EDP_BRIJ_I2C_SCL",
+ "EN_PP3300_DX_EDP",
+ "SD_CD_ODL",
+ "BT_UART_RTS",
+ "BT_UART_CTS",
+ "BT_UART_RXD",
+ "BT_UART_TXD",
+ "AMP_I2C_SDA",
+ "AMP_I2C_SCL",
+ "AP_BRD_ID2",
+ "",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "AP_EC_SPI_MISO",
+ "AP_EC_SPI_MOSI",
+ "FORCED_USB_BOOT",
+ "AMP_BCLK",
+ "AMP_LRCLK",
+ "AMP_DOUT",
+ "AMP_DIN",
+ "AP_BRD_ID1",
+ "PEN_PDCT_L",
+ "HP_MCLK",
+ "HP_BCLK",
+ "HP_LRCLK",
+ "HP_DOUT",
+ "HP_DIN",
+ "",
+ "",
+ "",
+ "",
+ "BT_SLIMBUS_DATA",
+ "BT_SLIMBUS_CLK",
+ "AMP_RESET_L",
+ "",
+ "FCAM_VSYNC",
+ "",
+ "AP_SKU_ID0",
+ "EC_WOV_BCLK",
+ "EC_WOV_LRCLK",
+ "EC_WOV_DOUT",
+ "",
+ "",
+ "AP_H1_SPI_MISO",
+ "AP_H1_SPI_MOSI",
+ "AP_H1_SPI_CLK",
+ "AP_H1_SPI_CS_L",
+ "",
+ "AP_SPI_CS0_L",
+ "AP_SPI_MOSI",
+ "AP_SPI_MISO",
+ "",
+ "",
+ "AP_SPI_CLK",
+ "",
+ "RFFE6_CLK",
+ "RFFE6_DATA",
+ "BOOT_CONFIG_1",
+ "BOOT_CONFIG_2",
+ "BOOT_CONFIG_0",
+ "EDP_BRIJ_EN",
+ "",
+ "USB_HS_TX_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RST",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RST",
+ "",
+ "AP_SKU_ID1",
+ "SDM_GRFC_8",
+ "SDM_GRFC_9",
+ "AP_RST_REQ",
+ "HP_IRQ",
+ "TS_RESET_L",
+ "PEN_EJECT_ODL",
+ "HUB_RST_L",
+ "FP_TO_AP_IRQ",
+ "AP_EC_INT_L",
+ "",
+ "",
+ "TS_INT_L",
+ "AP_SUSPEND_L",
+ "SDM_GRFC_3",
+ /*
+ * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
+ * call it BIOS_FLASH_WP_R_L.
+ */
+ "AP_FLASH_WP_L",
+ "H1_AP_INT_ODL",
+ "QLINK_REQ",
+ "QLINK_EN",
+ "SDM_GRFC_2",
+ "BOOT_CONFIG_3",
+ "WMSS_RESET_L",
+ "SDM_GRFC_0",
+ "SDM_GRFC_1",
+ "RFFE3_DATA",
+ "RFFE3_CLK",
+ "RFFE4_DATA",
+ "RFFE4_CLK",
+ "RFFE5_DATA",
+ "RFFE5_CLK",
+ "GNSS_EN",
+ "WCI2_LTE_COEX_RXD",
+ "WCI2_LTE_COEX_TXD",
+ "AP_RAM_ID0",
+ "AP_RAM_ID1",
+ "RFFE1_DATA",
+ "RFFE1_CLK";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
new file mode 100644
index 000000000000..1ebbd568dfd7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -0,0 +1,1326 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Cheza device tree source (common between revisions)
+ *
+ * Copyright 2018 Google LLC.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm8005.dtsi"
+#include "pm8998.dtsi"
+
+/ {
+ aliases {
+ bluetooth0 = &bluetooth;
+ hsuart0 = &uart6;
+ serial0 = &uart9;
+ wifi0 = &wifi;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&cros_ec_pwm 0>;
+ enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+ power-supply = <&ppvar_sys>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ap_edp_bklten>;
+ };
+
+ /* FIXED REGULATORS - parents above children */
+
+ /* This is the top level supply and variable voltage */
+ ppvar_sys: ppvar-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "ppvar_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* This divides ppvar_sys by 2, so voltage is variable */
+ src_vph_pwr: src-vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "src_vph_pwr";
+
+ /* EC turns on with switchcap_on_l; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp5000_a: pp5000-a-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp5000_a";
+
+ /* EC turns on with en_pp5000_a; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ src_vreg_bob: src-vreg-bob-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "src_vreg_bob";
+
+ /* EC turns on with vbob_en; always on for AP */
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+
+ pp3300_dx_edp: pp3300-dx-edp-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "pp3300_dx_edp";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&en_pp3300_dx_edp>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ src_pp1800_s4a: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "src_pp1800_s4a";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&src_vph_pwr>;
+ };
+
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_eject_odl>;
+
+ pen-insert {
+ label = "Pen Insert";
+ /* Insert = low, eject = high */
+ gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
+ linux,code = <SW_PEN_INSERTED>;
+ linux,input-type = <EV_SW>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ compatible ="innolux,p120zdg-bf1";
+ power-supply = <&pp3300_dx_edp>;
+ backlight = <&backlight>;
+ no-hpd;
+
+ ports {
+ panel_in: port {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&sn65dsi86_out>;
+ };
+ };
+ };
+ };
+};
+
+/*
+ * Reserved memory changes
+ *
+ * Putting this all together (out of order with the rest of the file) to keep
+ * all modifications to the memory map (from sdm845.dtsi) in one place.
+ */
+
+/*
+ * Our mpss_region is 8MB bigger than the default one and that conflicts
+ * with venus_mem and cdsp_mem.
+ *
+ * For venus_mem we'll delete and re-create at a different address.
+ *
+ * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
+ * that also means we need to delete cdsp_pas.
+ */
+/delete-node/ &venus_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &cdsp_pas;
+
+/* Increase the size from 120 MB to 128 MB */
+&mpss_region {
+ reg = <0 0x8e000000 0 0x8000000>;
+};
+
+/* Increase the size from 2MB to 8MB */
+&rmtfs_mem {
+ reg = <0 0x88f00000 0 0x800000>;
+};
+
+/ {
+ reserved-memory {
+ venus_mem: memory@96000000 {
+ reg = <0 0x96000000 0 0x500000>;
+ no-map;
+ };
+ };
+};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /*
+ * In theory chip supports up to 104 MHz and controller up
+ * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
+ * that for now. b:117440651
+ */
+ spi-max-frequency = <25000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+};
+
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&src_vph_pwr>;
+ vdd-s2-supply = <&src_vph_pwr>;
+ vdd-s3-supply = <&src_vph_pwr>;
+ vdd-s4-supply = <&src_vph_pwr>;
+ vdd-s5-supply = <&src_vph_pwr>;
+ vdd-s6-supply = <&src_vph_pwr>;
+ vdd-s7-supply = <&src_vph_pwr>;
+ vdd-s8-supply = <&src_vph_pwr>;
+ vdd-s9-supply = <&src_vph_pwr>;
+ vdd-s10-supply = <&src_vph_pwr>;
+ vdd-s11-supply = <&src_vph_pwr>;
+ vdd-s12-supply = <&src_vph_pwr>;
+ vdd-s13-supply = <&src_vph_pwr>;
+ vdd-l1-l27-supply = <&src_pp1025_s7a>;
+ vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
+ vdd-l3-l11-supply = <&src_pp1025_s7a>;
+ vdd-l4-l5-supply = <&src_pp1025_s7a>;
+ vdd-l6-supply = <&src_vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
+ vdd-l9-supply = <&src_pp2040_s5a>;
+ vdd-l10-l23-l25-supply = <&src_vreg_bob>;
+ vdd-l13-l19-l21-supply = <&src_vreg_bob>;
+ vdd-l16-l28-supply = <&src_vreg_bob>;
+ vdd-l18-l22-supply = <&src_vreg_bob>;
+ vdd-l20-l24-supply = <&src_vreg_bob>;
+ vdd-l26-supply = <&src_pp1350_s3a>;
+ vin-lvs-1-2-supply = <&src_pp1800_s4a>;
+
+ src_pp1125_s2a: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ src_pp1350_s3a: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ src_pp2040_s5a: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ src_pp1025_s7a: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ src_pp875_l1a: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ src_pp1200_l2a: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+
+ /* TODO: why??? */
+ regulator-always-on;
+ };
+
+ pp1000_l3a_sdr845: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ src_pp800_l5a: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ src_pp1800_l6a: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_l7a_wcn3990: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp1200_l8a: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1800_dx_pen:
+ src_pp1800_l9a: ldo9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp1800_l10a: ldo10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1000_l11a_sdr845: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ src_pp1800_l12a: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ src_pp2950_l13a: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp1800_l14a: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp1800_l15a: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp2700_l16a: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp1300_l17a: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp2700_l18a: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * NOTE: this rail should have been called
+ * src_pp3300_l19a in the schematic
+ */
+ src_pp3000_l19a: ldo19 {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp2950_l20a: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp2950_l21a: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_hub:
+ src_pp3300_l22a: ldo22 {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ /*
+ * HACK: Should add a usb hub node and driver
+ * to turn this on and off at suspend/resume time
+ */
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ pp3300_l23a_ch1_wcn3990: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ src_pp3075_l24a: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_l25a_ch0_wcn3990: ldo25 {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp1200_hub:
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ src_pp1200_l26a: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ pp3300_dx_pen:
+ src_pp3300_l28a: ldo28 {
+ regulator-min-microvolt = <3304000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ src_pp1800_lvs1: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ src_pp1800_lvs2: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&src_vph_pwr>;
+ vdd-s2-supply = <&src_vph_pwr>;
+ vdd-s3-supply = <&src_vph_pwr>;
+ vdd-s4-supply = <&src_vph_pwr>;
+
+ src_pp600_s3c: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
+};
+
+&dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ ports {
+ port@1 {
+ endpoint {
+ remote-endpoint = <&sn65dsi86_in>;
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dsi0_phy {
+ status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+edp_brij_i2c: &i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ sn65dsi86_bridge: bridge@2d {
+ compatible = "ti,sn65dsi86";
+ reg = <0x2d>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+ enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+
+ vpll-supply = <&src_pp1800_s4a>;
+ vccio-supply = <&src_pp1800_s4a>;
+ vcca-supply = <&src_pp1200_l2a>;
+ vcc-supply = <&src_pp1200_l2a>;
+
+ clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+ clock-names = "refclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ sn65dsi86_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ sn65dsi86_out: endpoint {
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+ };
+};
+
+ap_pen_1v8: &i2c11 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ digitizer@9 {
+ compatible = "wacom,w9013", "hid-over-i2c";
+ reg = <0x9>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+ vdd-supply = <&pp3300_dx_pen>;
+ vddl-supply = <&pp1800_dx_pen>;
+ post-power-on-delay-ms = <100>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+
+ hid-descr-addr = <0x1>;
+ };
+};
+
+amp_i2c: &i2c12 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
+
+ap_ts_i2c: &i2c14 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ touchscreen@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_l &ts_reset_l>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc33-supply = <&src_pp3300_l28a>;
+
+ reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&lpasscc {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_mdp {
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
+
+ vmmc-supply = <&src_pp2950_l21a>;
+ vqmmc-supply = <&vddpx_2>;
+
+ cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi10 {
+ status = "okay";
+
+ cros_ec: ec@0 {
+ compatible = "google,cros-ec-spi";
+ reg = <0>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_ap_int_l>;
+ spi-max-frequency = <3000000>;
+
+ cros_ec_pwm: ec-pwm {
+ compatible = "google,cros-ec-pwm";
+ #pwm-cells = <1>;
+ };
+
+ i2c_tunnel: i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ google,remote-bus = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pdupdate {
+ compatible = "google,cros-ec-pd-update";
+ };
+ };
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&uart6 {
+ status = "okay";
+
+ bluetooth: wcn3990-bt {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&src_pp1800_s4a>;
+ vddxo-supply = <&pp1800_l7a_wcn3990>;
+ vddrf-supply = <&src_pp1300_l17a>;
+ vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
+ max-speed = <3200000>;
+ };
+};
+
+&uart9 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ status = "okay";
+ pinctrl-names = "init", "default";
+ pinctrl-0 = <&ufs_dev_reset_assert>;
+ pinctrl-1 = <&ufs_dev_reset_deassert>;
+
+ vcc-supply = <&src_pp2950_l20a>;
+ vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+
+ /* We'll use this as USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+};
+
+&usb_1_dwc3 {
+ /*
+ * The hardware design intends this port to be hooked up in peripheral
+ * mode, so we'll hardcode it here. Some details:
+ * - SDM845 expects only a single Type C connector so it has only one
+ * native Type C port but cheza has two Type C connectors.
+ * - The only source of DP is the single native Type C port.
+ * - On cheza we want to be able to hook DP up to _either_ of the
+ * two Type C connectors and want to be able to achieve 4 lanes of DP.
+ * - When you configure a Type C port for 4 lanes of DP you lose USB3.
+ * - In order to make everything work, the native Type C port is always
+ * configured as 4-lanes DP so it's always available.
+ * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
+ * sent to the two Type C connectors.
+ * - The extra USB2 lines from the native Type C port are always
+ * setup as "peripheral" so that we can mux them over to one connector
+ * or the other if someone needs the connector configured as a gadget
+ * (but they only get USB2 speeds).
+ *
+ * All the hardware muxes would allow us to hook things up in different
+ * ways to some potential benefit for static configurations (you could
+ * achieve extra USB2 bandwidth by using two different ports for the
+ * two conenctors or possibly even get USB3 peripheral mode), but in
+ * each case you end up forcing to disconnect/reconnect an in-use
+ * USB session in some cases depending on what you hotplug into the
+ * other connector. Thus hardcoding this as peripheral makes sense.
+ */
+ dr_mode = "peripheral";
+
+ /*
+ * We always need the high speed pins as 4-lanes DP in case someone
+ * hotplugs a DP peripheral. Thus limit this port to a max of high
+ * speed.
+ */
+ maximum-speed = "high-speed";
+
+ /*
+ * We don't need the usb3-phy since we run in highspeed mode always, so
+ * re-define these properties removing the superspeed USB PHY reference.
+ */
+ phys = <&usb_1_hsphy>;
+ phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ /* We have this hooked up to a hub and we always use in host mode */
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb2_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
+ vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
+ vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
+ vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qspi_cs0 {
+ pinconf {
+ pins = "gpio90";
+ bias-disable;
+ };
+};
+
+&qspi_clk {
+ pinconf {
+ pins = "gpio95";
+ bias-disable;
+ };
+};
+
+&qspi_data01 {
+ pinconf {
+ pins = "gpio91", "gpio92";
+
+ /* High-Z when no transfers; nice to park the lines */
+ bias-pull-up;
+ };
+};
+
+&qup_i2c3_default {
+ pinconf {
+ pins = "gpio41", "gpio42";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c11_default {
+ pinconf {
+ pins = "gpio31", "gpio32";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c12_default {
+ pinconf {
+ pins = "gpio49", "gpio50";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_i2c14_default {
+ pinconf {
+ pins = "gpio33", "gpio34";
+ drive-strength = <2>;
+
+ /* Has external pullup */
+ bias-disable;
+ };
+};
+
+&qup_spi0_default {
+ pinconf {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi5_default {
+ pinconf {
+ pins = "gpio85", "gpio86", "gpio87", "gpio88";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_spi10_default {
+ pinconf {
+ pins = "gpio53", "gpio54", "gpio55", "gpio56";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&qup_uart6_default {
+ /* Change pinmux to all 4 pins since CTS and RTS are connected */
+ pinmux {
+ pins = "gpio45", "gpio46",
+ "gpio47", "gpio48";
+ };
+
+ pinconf-cts {
+ /*
+ * Configure a pull-down on 45 (CTS) to match the pull of
+ * the Bluetooth module.
+ */
+ pins = "gpio45";
+ bias-pull-down;
+ };
+
+ pinconf-rts-tx {
+ /* We'll drive 46 (RTS) and 47 (TX), so no pull */
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ /*
+ * Configure a pull-up on 48 (RX). This is needed to avoid
+ * garbage data when the TX pin of the Bluetooth module is
+ * in tri-state (module powered off or not driving the
+ * signal yet).
+ */
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
+
+&qup_uart9_default {
+ pinconf-tx {
+ pins = "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+/* PINCTRL - board-specific pinctrl */
+&pm8005_gpio {
+ gpio-line-names = "",
+ "",
+ "SLB",
+ "";
+};
+
+&pm8998_adc {
+ adc-chan@ADC5_AMUX_THM1_100K_PU {
+ reg = <ADC5_AMUX_THM1_100K_PU>;
+ label = "sdm_temp";
+ };
+
+ adc-chan@ADC5_AMUX_THM2_100K_PU {
+ reg = <ADC5_AMUX_THM2_100K_PU>;
+ label = "quiet_temp";
+ };
+
+ adc-chan@ADC5_AMUX_THM3_100K_PU {
+ reg = <ADC5_AMUX_THM3_100K_PU>;
+ label = "lte_temp_1";
+ };
+
+ adc-chan@ADC5_AMUX_THM4_100K_PU {
+ reg = <ADC5_AMUX_THM4_100K_PU>;
+ label = "lte_temp_2";
+ };
+
+ adc-chan@ADC5_AMUX_THM5_100K_PU {
+ reg = <ADC5_AMUX_THM5_100K_PU>;
+ label = "charger_temp";
+ };
+};
+
+&pm8998_gpio {
+ gpio-line-names = "",
+ "",
+ "SW_CTRL",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "CFG_OPT1",
+ "WCSS_PWR_REQ",
+ "",
+ "CFG_OPT2",
+ "SLB";
+};
+
+&tlmm {
+ /*
+ * pinctrl settings for pins that have no real owners.
+ */
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&bios_flash_wp_r_l>,
+ <&ap_suspend_l_deassert>;
+
+ pinctrl-1 = <&bios_flash_wp_r_l>,
+ <&ap_suspend_l_assert>;
+
+ /*
+ * Hogs prevent usermode from changing the value. A GPIO can be both
+ * here and in the pinctrl section.
+ */
+ ap-suspend-l-hog {
+ gpio-hog;
+ gpios = <126 GPIO_ACTIVE_LOW>;
+ output-low;
+ };
+
+ ap_edp_bklten: ap-edp-bklten {
+ pinmux {
+ pins = "gpio37";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio37";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ bios_flash_wp_r_l: bios-flash-wp-r-l {
+ pinmux {
+ pins = "gpio128";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio128";
+ bias-disable;
+ };
+ };
+
+ ec_ap_int_l: ec-ap-int-l {
+ pinmux {
+ pins = "gpio122";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio122";
+ bias-pull-up;
+ };
+ };
+
+ edp_brij_en: edp-brij-en {
+ pinmux {
+ pins = "gpio102";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio102";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ edp_brij_irq: edp-brij-irq {
+ pinmux {
+ pins = "gpio10";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio10";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ en_pp3300_dx_edp: en-pp3300-dx-edp {
+ pinmux {
+ pins = "gpio43";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio43";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ h1_ap_int_odl: h1-ap-int-odl {
+ pinmux {
+ pins = "gpio129";
+ function = "gpio";
+ input-enable;
+ };
+
+ pinconf {
+ pins = "gpio129";
+ bias-pull-up;
+ };
+ };
+
+ pen_eject_odl: pen-eject-odl {
+ pinmux {
+ pins = "gpio119";
+ function = "gpio";
+ bias-pull-up;
+ };
+ };
+
+ pen_irq_l: pen-irq-l {
+ pinmux {
+ pins = "gpio24";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio24";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ pen_pdct_l: pen-pdct-l {
+ pinmux {
+ pins = "gpio63";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio63";
+
+ /* Has external pullup */
+ bias-disable;
+ };
+ };
+
+ pen_rst_l: pen-rst-l {
+ pinmux {
+ pins = "gpio23";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio23";
+ bias-disable;
+ drive-strength = <2>;
+
+ /*
+ * The pen driver doesn't currently support
+ * driving this reset line. By specifying
+ * output-high here we're relying on the fact
+ * that this pin has a default pulldown at boot
+ * (which makes sure the pen was in reset if it
+ * was powered) and then we set it high here to
+ * take it out of reset. Better would be if the
+ * pen driver could control this and we could
+ * remove "output-high" here.
+ */
+ output-high;
+ };
+ };
+
+ sdc2_clk: sdc2-clk {
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+
+ /*
+ * It seems that mmc_test reports errors if drive
+ * strength is not 16.
+ */
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_cmd: sdc2-cmd {
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_data: sdc2-data {
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sd_cd_odl: sd-cd-odl {
+ pinmux {
+ pins = "gpio44";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio44";
+ bias-pull-up;
+ };
+ };
+
+ ts_int_l: ts-int-l {
+ pinmux {
+ pins = "gpio125";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio125";
+ bias-pull-up;
+ };
+ };
+
+ ts_reset_l: ts-reset-l {
+ pinmux {
+ pins = "gpio118";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio118";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ ufs_dev_reset_assert: ufs_dev_reset_assert {
+ config {
+ pins = "ufs_reset";
+ bias-pull-down; /* default: pull down */
+ /*
+ * UFS_RESET driver strengths are having
+ * different values/steps compared to typical
+ * GPIO drive strengths.
+ *
+ * Following table clarifies:
+ *
+ * HDRV value | UFS_RESET | Typical GPIO
+ * (dec) | (mA) | (mA)
+ * 0 | 0.8 | 2
+ * 1 | 1.55 | 4
+ * 2 | 2.35 | 6
+ * 3 | 3.1 | 8
+ * 4 | 3.9 | 10
+ * 5 | 4.65 | 12
+ * 6 | 5.4 | 14
+ * 7 | 6.15 | 16
+ *
+ * POR value for UFS_RESET HDRV is 3 which means
+ * 3.1mA and we want to use that. Hence just
+ * specify 8mA to "drive-strength" binding and
+ * that should result into writing 3 to HDRV
+ * field.
+ */
+ drive-strength = <8>; /* default: 3.1 mA */
+ output-low; /* active low reset */
+ };
+ };
+
+ ufs_dev_reset_deassert: ufs_dev_reset_deassert {
+ config {
+ pins = "ufs_reset";
+ bias-pull-down; /* default: pull down */
+ /*
+ * default: 3.1 mA
+ * check comments under ufs_dev_reset_assert
+ */
+ drive-strength = <8>;
+ output-high; /* active low reset */
+ };
+ };
+
+ ap_suspend_l_assert: ap_suspend_l_assert {
+ config {
+ pins = "gpio126";
+ function = "gpio";
+ bias-no-pull;
+ drive-strength = <2>;
+ output-low;
+ };
+ };
+
+ ap_suspend_l_deassert: ap_suspend_l_deassert {
+ config {
+ pins = "gpio126";
+ function = "gpio";
+ bias-no-pull;
+ drive-strength = <2>;
+ output-high;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
new file mode 100644
index 000000000000..71bd717a4251
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -0,0 +1,557 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+ model = "Thundercomm Dragonboard 845c";
+ compatible = "thundercomm,db845c", "qcom,sdm845";
+
+ aliases {
+ serial0 = &uart9;
+ hsuart0 = &uart6;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ dc12v: dc12v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "DC12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_pin_a>;
+
+ vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ user4 {
+ label = "green:user4";
+ gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "panic-indicator";
+ default-state = "off";
+ };
+
+ wlan {
+ label = "yellow:wlan";
+ gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt {
+ label = "blue:bt";
+ gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "bluetooth-power";
+ default-state = "off";
+ };
+ };
+
+ lt9611_1v8: lt9611-vdd18-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_1V8";
+
+ vin-supply = <&vdc_5v>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ lt9611_3v3: lt9611-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "LT9611_3V3";
+
+ vin-supply = <&vdc_3v3>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ // TODO: make it possible to drive same GPIO from two clients
+ // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+ // enable-active-high;
+ };
+
+ pcie0_1p05v: pcie-0-1p05v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "PCIE0_1.05V";
+
+ vin-supply = <&vbat>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+
+ // TODO: make it possible to drive same GPIO from two clients
+ // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+ // enable-active-high;
+ };
+
+ pcie0_3p3v_dual: vldo-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VLDO_3V3";
+
+ vin-supply = <&vbat>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pwren_state>;
+ };
+
+ v5p0_hdmiout: v5p0-hdmiout-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "V5P0_HDMIOUT";
+
+ vin-supply = <&vdc_5v>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <500000>;
+
+ // TODO: make it possible to drive same GPIO from two clients
+ // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+ // enable-active-high;
+ };
+
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT";
+
+ vin-supply = <&dc12v>;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ };
+
+ vbat_som: vbat-som-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VBAT_SOM";
+
+ vin-supply = <&dc12v>;
+ regulator-min-microvolt = <4200000>;
+ regulator-max-microvolt = <4200000>;
+ regulator-always-on;
+ };
+
+ vdc_3v3: vdc-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDC_3V3";
+ vin-supply = <&dc12v>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdc_5v: vdc-5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDC_5V";
+
+ vin-supply = <&dc12v>;
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <500000>;
+ regulator-always-on;
+ };
+
+ vreg_s4a_1p8: vreg-s4a-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+
+ vin-supply = <&vbat_som>;
+ };
+};
+
+&adsp_pas {
+ status = "okay";
+
+ firmware-name = "qcom/db845c/adsp.mdt";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2968000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2968000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+};
+
+&cdsp_pas {
+ status = "okay";
+ firmware-name = "qcom/db845c/cdsp.mdt";
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+};
+
+&pm8998_gpio {
+ vol_up_pin_a: vol-up-active {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
+
+&pm8998_pon {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+};
+
+&tlmm {
+ pcie0_pwren_state: pcie0-pwren {
+ pins = "gpio90";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_default_state: sdc2-default {
+ clk {
+ pins = "sdc2_clk";
+ bias-disable;
+
+ /*
+ * It seems that mmc_test reports errors if drive
+ * strength is not 16 on clk, cmd, and data pins.
+ */
+ drive-strength = <16>;
+ };
+
+ cmd {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ data {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_card_det_n: sd-card-det-n {
+ pins = "gpio126";
+ function = "gpio";
+ bias-pull-up;
+ };
+};
+
+&uart6 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&uart9 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l26a_1p2>;
+ vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ dr_mode = "host";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l26a_1p2>;
+ vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&ufs_mem_hc {
+ status = "okay";
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <800000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l26a_1p2>;
+};
+
+&wifi {
+ status = "okay";
+
+ vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+ vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+ vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+ vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&qup_uart6_default {
+ pinmux {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "qup6";
+ };
+
+ cts {
+ pins = "gpio45";
+ bias-disable;
+ };
+
+ rts-tx {
+ pins = "gpio46", "gpio47";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio48";
+ bias-pull-up;
+ };
+};
+
+&qup_uart9_default {
+ pinconf-tx {
+ pins = "gpio4";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ pinconf-rx {
+ pins = "gpio5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index 02b8357c8ce8..2e78638eb73b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -404,8 +404,8 @@
};
&usb_1_dwc3 {
- /* Until we have Type C hooked up we'll force this as host. */
- dr_mode = "host";
+ /* Until we have Type C hooked up we'll force this as peripheral. */
+ dr_mode = "peripheral";
};
&usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index fcb93300ca62..4babff5f19b5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -190,6 +190,9 @@
compatible = "qcom,kryo385";
reg = <0x0 0x0>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -208,6 +211,9 @@
compatible = "qcom,kryo385";
reg = <0x0 0x100>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -223,6 +229,9 @@
compatible = "qcom,kryo385";
reg = <0x0 0x200>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -238,6 +247,9 @@
compatible = "qcom,kryo385";
reg = <0x0 0x300>;
enable-method = "psci";
+ cpu-idle-states = <&LITTLE_CPU_SLEEP_0
+ &LITTLE_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
capacity-dmips-mhz = <607>;
qcom,freq-domain = <&cpufreq_hw 0>;
#cooling-cells = <2>;
@@ -254,6 +266,9 @@
reg = <0x0 0x400>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_400>;
@@ -269,6 +284,9 @@
reg = <0x0 0x500>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_500>;
@@ -284,6 +302,9 @@
reg = <0x0 0x600>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_600>;
@@ -299,6 +320,9 @@
reg = <0x0 0x700>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
+ cpu-idle-states = <&BIG_CPU_SLEEP_0
+ &BIG_CPU_SLEEP_1
+ &CLUSTER_SLEEP_0>;
qcom,freq-domain = <&cpufreq_hw 1>;
#cooling-cells = <2>;
next-level-cache = <&L2_700>;
@@ -325,26 +349,78 @@
core3 {
cpu = <&CPU3>;
};
- };
- cluster1 {
- core0 {
+ core4 {
cpu = <&CPU4>;
};
- core1 {
+ core5 {
cpu = <&CPU5>;
};
- core2 {
+ core6 {
cpu = <&CPU6>;
};
- core3 {
+ core7 {
cpu = <&CPU7>;
};
};
};
+
+ idle-states {
+ entry-method = "psci";
+
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <350>;
+ exit-latency-us = <461>;
+ min-residency-us = <1890>;
+ local-timer-stop;
+ };
+
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "little-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <360>;
+ exit-latency-us = <531>;
+ min-residency-us = <3934>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-power-down";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <264>;
+ exit-latency-us = <621>;
+ min-residency-us = <952>;
+ local-timer-stop;
+ };
+
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
+ compatible = "arm,idle-state";
+ idle-state-name = "big-rail-power-down";
+ arm,psci-suspend-param = <0x40000004>;
+ entry-latency-us = <702>;
+ exit-latency-us = <1061>;
+ min-residency-us = <4488>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "cluster-power-down";
+ arm,psci-suspend-param = <0x400000F4>;
+ entry-latency-us = <3263>;
+ exit-latency-us = <6562>;
+ min-residency-us = <9987>;
+ local-timer-stop;
+ };
+ };
};
pmu {
@@ -1671,6 +1747,64 @@
};
};
+ mss_pil: remoteproc@4080000 {
+ compatible = "qcom,sdm845-mss-pil";
+ reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended =
+ <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+ <&gcc GCC_PRNG_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "bus", "mem", "gpll0_mss",
+ "snoc_axi", "mnoc_axi", "prng", "xo";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+ <&pdc_reset PDC_MODEM_SYNC_RESET>;
+ reset-names = "mss_restart", "pdc_reset";
+
+ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+ power-domains = <&aoss_qmp 2>,
+ <&rpmhpd SDM845_CX>,
+ <&rpmhpd SDM845_MX>,
+ <&rpmhpd SDM845_MSS>;
+ power-domain-names = "load_state", "cx", "mx", "mss";
+
+ mba {
+ memory-region = <&mba_region>;
+ };
+
+ mpss {
+ memory-region = <&mpss_region>;
+ };
+
+ glink-edge {
+ interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apss_shared 12>;
+ };
+ };
+
gpucc: clock-controller@5090000 {
compatible = "qcom,sdm845-gpucc";
reg = <0 0x05090000 0 0x9000>;
@@ -2106,6 +2240,133 @@
};
};
+ gpu@5000000 {
+ compatible = "qcom,adreno-630.2", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>;
+ reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+ /*
+ * Look ma, no clocks! The GPU clocks and power are
+ * controlled entirely by the GMU
+ */
+
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ iommus = <&adreno_smmu 0>;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ qcom,gmu = <&gmu>;
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ };
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-710000000 {
+ opp-hz = /bits/ 64 <710000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+ };
+
+ opp-675000000 {
+ opp-hz = /bits/ 64 <675000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+ };
+
+ opp-596000000 {
+ opp-hz = /bits/ 64 <596000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ };
+
+ opp-520000000 {
+ opp-hz = /bits/ 64 <520000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ };
+
+ opp-414000000 {
+ opp-hz = /bits/ 64 <414000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ };
+
+ opp-342000000 {
+ opp-hz = /bits/ 64 <342000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-257000000 {
+ opp-hz = /bits/ 64 <257000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ };
+ };
+ };
+
+ adreno_smmu: iommu@5040000 {
+ compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
+ reg = <0 0x5040000 0 0x10000>;
+ #iommu-cells = <1>;
+ #global-interrupts = <2>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+ <&gcc GCC_GPU_CFG_AHB_CLK>;
+ clock-names = "bus", "iface";
+
+ power-domains = <&gpucc GPU_CX_GDSC>;
+ };
+
+ gmu: gmu@506a000 {
+ compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+
+ reg = <0 0x506a000 0 0x30000>,
+ <0 0xb280000 0 0x10000>,
+ <0 0xb480000 0 0x10000>;
+ reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+ interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hfi", "gmu";
+
+ clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+ <&gpucc GPU_CC_CXO_CLK>,
+ <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+ <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+ clock-names = "gmu", "cxo", "axi", "memnoc";
+
+ power-domains = <&gpucc GPU_CX_GDSC>,
+ <&gpucc GPU_GX_GDSC>;
+ power-domain-names = "cx", "gx";
+
+ iommus = <&adreno_smmu 5>;
+
+ operating-points-v2 = <&gmu_opp_table>;
+
+ gmu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ };
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+ };
+ };
+ };
+
dispcc: clock-controller@af00000 {
compatible = "qcom,sdm845-dispcc";
reg = <0 0x0af00000 0 0x10000>;
@@ -2142,6 +2403,16 @@
#reset-cells = <1>;
};
+ aoss_qmp: qmp@c300000 {
+ compatible = "qcom,sdm845-aoss-qmp";
+ reg = <0 0x0c300000 0 0x100000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 0>;
+
+ #clock-cells = <0>;
+ #power-domain-cells = <1>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0 0x0c440000 0 0x1100>,
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 6cde526547e4..42b74c283289 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
new file mode 100644
index 000000000000..3311a982fff8
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi0_con: endpoint {
+ remote-endpoint = <&rcar_dw_hdmi0_out>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ led1 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ led2 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ led3 {
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reg_1p8v: regulator0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vbus0_usb2: regulator-vbus0-usb2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB20_VBUS0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vccq_sdhi0: regulator-vccq-sdhi0 {
+ compatible = "regulator-gpio";
+
+ regulator-name = "SDHI0 VccQ";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+ gpios-states = <1>;
+ states = <3300000 1
+ 1800000 0>;
+ };
+
+ x302_clk: x302-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <33000000>;
+ };
+
+ x304_clk: x304-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>,
+ <&versaclock5 1>,
+ <&x302_clk>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.2",
+ "dclkin.0", "dclkin.1", "dclkin.2";
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+ clock-frequency = <32768>;
+};
+
+&gpio6 {
+ usb1-reset {
+ gpio-hog;
+ gpios = <10 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "usb1-reset";
+ };
+};
+
+&hdmi0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ reg = <1>;
+ rcar_dw_hdmi0_out: endpoint {
+ remote-endpoint = <&hdmi0_con>;
+ };
+ };
+ };
+};
+
+&hsusb {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ versaclock5: clock-generator@6a {
+ compatible = "idt,5p49v5923";
+ reg = <0x6a>;
+ #clock-cells = <1>;
+ clocks = <&x304_clk>;
+ clock-names = "xin";
+ };
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ scif2_pins: scif2 {
+ groups = "scif2_data_a";
+ function = "scif2";
+ };
+
+ scif_clk_pins: scif_clk {
+ groups = "scif_clk_a";
+ function = "scif_clk";
+ };
+
+ sdhi0_pins: sd0 {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <3300>;
+ };
+
+ sdhi0_pins_uhs: sd0_uhs {
+ groups = "sdhi0_data4", "sdhi0_ctrl";
+ function = "sdhi0";
+ power-source = <1800>;
+ };
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+ groups = "usb1";
+ function = "usb1";
+ };
+
+ ovc {
+ pins = "GP_6_27";
+ bias-pull-up;
+ };
+ };
+
+ usb30_pins: usb30 {
+ groups = "usb30";
+ function = "usb30";
+ };
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
+&scif2 {
+ pinctrl-0 = <&scif2_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&scif_clk {
+ clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-1 = <&sdhi0_pins_uhs>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&vccq_sdhi0>;
+ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-1 = <&sdhi3_pins>;
+ pinctrl-names = "default", "state_uhs";
+
+ vmmc-supply = <&reg_3p3v>;
+ vqmmc-supply = <&reg_1p8v>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ non-removable;
+ fixed-emmc-driver-type = <1>;
+};
+
+&usb_extal_clk {
+ clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus0_usb2>;
+ status = "okay";
+};
+
+&usb2_phy1 {
+ pinctrl-0 = <&usb1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&usb3_peri0 {
+ phys = <&usb3_phy0>;
+ phy-names = "usb";
+
+ companion = <&xhci0>;
+
+ status = "okay";
+};
+
+&usb3_phy0 {
+ status = "okay";
+};
+
+&usb3s0_clk {
+ clock-frequency = <100000000>;
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
new file mode 100644
index 000000000000..07a6eeaed12e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+ aliases {
+ ethernet0 = &avb;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+ };
+};
+
+&avb {
+ pinctrl-0 = <&avb_pins>;
+ pinctrl-names = "default";
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pciec0 {
+ status = "okay";
+};
+
+&pciec1 {
+ status = "okay";
+};
+
+&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
+ avb_pins: avb {
+ mux {
+ groups = "avb_link", "avb_mdio", "avb_mii";
+ function = "avb";
+ };
+
+ pins_mdio {
+ groups = "avb_mdio";
+ drive-strength = <24>;
+ };
+
+ pins_mii_tx {
+ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+ drive-strength = <12>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
new file mode 100644
index 000000000000..6e33a3b27706
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M with sub board";
+ compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+ "renesas,r8a774a1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
new file mode 100644
index 000000000000..93ca973c856c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-common.dtsi"
+
+/ {
+ model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+ compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+
+ memory@600000000 {
+ device_type = "memory";
+ reg = <0x6 0x00000000 0x0 0x80000000>;
+ };
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index de282c4794ed..f209457c7807 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -56,10 +56,78 @@
clock-frequency = <0>;
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
+ cluster1_opp: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <820000>;
+ clock-latency-ns = <300000>;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&a57_0>;
+ };
+ core1 {
+ cpu = <&a57_1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&a53_0>;
+ };
+ core1 {
+ cpu = <&a53_1>;
+ };
+ core2 {
+ cpu = <&a53_2>;
+ };
+ core3 {
+ cpu = <&a53_3>;
+ };
+ };
+ };
+
a57_0: cpu@0 {
compatible = "arm,cortex-a57";
reg = <0x0>;
@@ -67,7 +135,11 @@
power-domains = <&sysc R8A774A1_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
a57_1: cpu@1 {
@@ -78,6 +150,9 @@
next-level-cache = <&L2_CA57>;
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
+ capacity-dmips-mhz = <1024>;
+ #cooling-cells = <2>;
};
a53_0: cpu@100 {
@@ -87,7 +162,11 @@
power-domains = <&sysc R8A774A1_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+ operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <560>;
};
a53_1: cpu@101 {
@@ -98,6 +177,8 @@
next-level-cache = <&L2_CA53>;
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+ operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <560>;
};
a53_2: cpu@102 {
@@ -108,6 +189,8 @@
next-level-cache = <&L2_CA53>;
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+ operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <560>;
};
a53_3: cpu@103 {
@@ -118,6 +201,8 @@
next-level-cache = <&L2_CA53>;
enable-method = "psci";
clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>;
+ operating-points-v2 = <&cluster1_opp>;
+ capacity-dmips-mhz = <560>;
};
L2_CA57: cache-controller-0 {
@@ -326,6 +411,76 @@
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a774a1-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a774a1-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a774a1-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a774a1-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a774a1-cpg-mssr";
reg = <0 0xe6150000 0 0x0bb0>;
@@ -377,6 +532,71 @@
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a774a1", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -601,15 +821,15 @@
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
@@ -686,6 +906,14 @@
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac1: dma-controller@e7300000 {
@@ -720,6 +948,14 @@
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
@@ -754,6 +990,14 @@
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
ipmmu_ds0: mmu@e6740000 {
@@ -869,6 +1113,7 @@
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
+ iommus = <&ipmmu_ds0 16>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1629,6 +1874,14 @@
resets = <&cpg 502>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>,
+ <&ipmmu_mp 2>, <&ipmmu_mp 3>,
+ <&ipmmu_mp 4>, <&ipmmu_mp 5>,
+ <&ipmmu_mp 6>, <&ipmmu_mp 7>,
+ <&ipmmu_mp 8>, <&ipmmu_mp 9>,
+ <&ipmmu_mp 10>, <&ipmmu_mp 11>,
+ <&ipmmu_mp 12>, <&ipmmu_mp 13>,
+ <&ipmmu_mp 14>, <&ipmmu_mp 15>;
};
audma1: dma-controller@ec720000 {
@@ -1663,6 +1916,14 @@
resets = <&cpg 501>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>,
+ <&ipmmu_mp 18>, <&ipmmu_mp 19>,
+ <&ipmmu_mp 20>, <&ipmmu_mp 21>,
+ <&ipmmu_mp 22>, <&ipmmu_mp 23>,
+ <&ipmmu_mp 24>, <&ipmmu_mp 25>,
+ <&ipmmu_mp 26>, <&ipmmu_mp 27>,
+ <&ipmmu_mp 28>, <&ipmmu_mp 29>,
+ <&ipmmu_mp 30>, <&ipmmu_mp 31>;
};
xhci0: usb@ee000000 {
@@ -1691,11 +1952,11 @@
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
- phys = <&usb2_phy0>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -1704,7 +1965,7 @@
reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 1>;
phy-names = "usb";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>;
@@ -1715,12 +1976,12 @@
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
- phys = <&usb2_phy0>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
@@ -1729,7 +1990,7 @@
reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 2>;
phy-names = "usb";
companion = <&ohci1>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
@@ -1742,10 +2003,10 @@
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
- #phy-cells = <0>;
+ resets = <&cpg 703>, <&cpg 704>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -1756,7 +2017,7 @@
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 702>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -1825,6 +2086,70 @@
resets = <&cpg 408>;
};
+ pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a774a1",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
+ pciec1: pcie@ee800000 {
+ compatible = "renesas,pcie-r8a774a1",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xee800000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000
+ 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000
+ 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000
+ 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ status = "disabled";
+ };
+
+ fdp1@fe940000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe940000 0 0x2400>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 119>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
+ resets = <&cpg 119>;
+ renesas,fcp = <&fcpf0>;
+ };
+
fcpf0: fcp@fe950000 {
compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;
@@ -1877,6 +2202,61 @@
iommus = <&ipmmu_vc0 19>;
};
+ vspb: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
+ resets = <&cpg 626>;
+
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x5000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x5000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ vspd2: vsp@fea30000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea30000 0 0x5000>;
+ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 621>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 621>;
+
+ renesas,fcp = <&fcpvd2>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A774A1_PD_A3VC>;
+ resets = <&cpg 631>;
+
+ renesas,fcp = <&fcpvi0>;
+ };
+
csi20: csi2@fea80000 {
compatible = "renesas,r8a774a1-csi2";
reg = <0 0xfea80000 0 0x10000>;
@@ -1988,6 +2368,101 @@
};
};
+ hdmi0: hdmi@fead0000 {
+ compatible = "renesas,r8a774a1-hdmi",
+ "renesas,rcar-gen3-hdmi";
+ reg = <0 0xfead0000 0 0x10000>;
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 729>,
+ <&cpg CPG_CORE R8A774A1_CLK_HDMI>;
+ clock-names = "iahb", "isfr";
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 729>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dw_hdmi0_in: endpoint {
+ remote-endpoint = <&du_out_hdmi0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ };
+ port@2 {
+ /* HDMI sound */
+ reg = <2>;
+ };
+ };
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a774a1";
+ reg = <0 0xfeb00000 0 0x70000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
+ status = "disabled";
+
+ vsps = <&vspd0 &vspd1 &vspd2>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_hdmi0: endpoint {
+ remote-endpoint = <&dw_hdmi0_in>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a774a1-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
@@ -1999,6 +2474,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
+ sustainable-power = <3874>;
trips {
sensor1_crit: sensor1-crit {
@@ -2013,6 +2489,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
+ sustainable-power = <3874>;
trips {
sensor2_crit: sensor2-crit {
@@ -2021,21 +2498,39 @@
type = "critical";
};
};
-
};
sensor_thermal3: sensor-thermal3 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
+ sustainable-power = <3874>;
trips {
+ target: trip-point1 {
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
sensor3_crit: sensor3-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&a57_0 0 2>;
+ contribution = <1024>;
+ };
+ map1 {
+ trip = <&target>;
+ cooling-device = <&a53_0 0 2>;
+ contribution = <1024>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
index 013a48c01211..46a77eefa536 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a774c0.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/display/tda998x.h>
/ {
model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
@@ -15,13 +16,25 @@
aliases {
serial0 = &scif2;
+ serial1 = &hscif2;
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&tda19988_out>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
@@ -52,6 +65,23 @@
reg = <0x0 0x48000000 0x0 0x78000000>;
};
+ sound: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,name = "CAT874 HDMI sound";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&tda19988>;
+ };
+ };
+
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
@@ -74,6 +104,46 @@
states = <3300000 1
1800000 0>;
};
+
+ wlan_en_reg: fixedregulator {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <70000>;
+
+ gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x13_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&tda19988_in>;
+ };
+ };
+ };
};
&ehci0 {
@@ -85,6 +155,81 @@
clock-frequency = <48000000>;
};
+&hscif2 {
+ pinctrl-0 = <&hscif2_pins>;
+ pinctrl-names = "default";
+
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "ti,wl1837-st";
+ enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ hd3ss3220@47 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x47>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ hd3ss3220_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+ };
+
+ tda19988: tda19988@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ video-ports = <0x234501>;
+
+ #sound-dai-cells = <0>;
+ audio-ports = <TDA998x_I2S 0x03>;
+ clocks = <&rcar_sound 1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ tda19988_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ tda19988_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+};
+
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
@@ -98,6 +243,13 @@
};
};
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
&ohci0 {
dr_mode = "host";
status = "okay";
@@ -113,11 +265,22 @@
};
&pfc {
+ du_pins: du {
+ groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
+ "du_clk_in_0";
+ function = "du";
+ };
+
i2c1_pins: i2c1 {
groups = "i2c1_b";
function = "i2c1";
};
+ hscif2_pins: hscif2 {
+ groups = "hscif2_data_a", "hscif2_ctrl_a";
+ function = "hscif2";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
@@ -134,6 +297,47 @@
function = "sdhi0";
power-source = <1800>;
};
+
+ sdhi3_pins: sd3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <1800>;
+ };
+
+ sound_pins: sound {
+ groups = "ssi01239_ctrl", "ssi0_data";
+ function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ groups = "audio_clkout1_a";
+ function = "audio_clk";
+ };
+
+ usb30_pins: usb30 {
+ groups = "usb30", "usb30_id";
+ function = "usb30";
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src0 &dvc0>;
+ };
+ };
};
&rwdt {
@@ -162,7 +366,47 @@
status = "okay";
};
+&sdhi3 {
+ status = "okay";
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
&usb2_phy0 {
renesas,no-otg-pins;
status = "okay";
};
+
+&usb3_peri0 {
+ companion = <&xhci0>;
+ status = "okay";
+ usb-role-switch;
+
+ port {
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_ep>;
+ };
+ };
+};
+
+&xhci0 {
+ pinctrl-0 = <&usb30_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 3f86db199dbf..e7b5bf23f978 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -70,7 +70,7 @@
#size-cells = <0>;
a53_0: cpu@0 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <0>;
device_type = "cpu";
power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
@@ -81,7 +81,7 @@
};
a53_1: cpu@1 {
- compatible = "arm,cortex-a53", "arm,armv8";
+ compatible = "arm,cortex-a53";
reg = <1>;
device_type = "cpu";
power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
@@ -684,7 +684,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
@@ -1580,7 +1580,7 @@
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
@@ -1592,7 +1592,7 @@
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -1608,7 +1608,7 @@
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 097538cc4b1f..1745ac4b307e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -155,6 +155,7 @@
power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
@@ -207,6 +208,8 @@
power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
@@ -812,7 +815,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
@@ -829,7 +832,7 @@
<&usb_dmac3 0>, <&usb_dmac3 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy3>;
+ phys = <&usb2_phy3 3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 705>, <&cpg 700>;
@@ -1450,6 +1453,17 @@
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a7795", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a7795",
"renesas,rcar-gen3-msiof";
@@ -2405,7 +2419,7 @@
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
@@ -2417,7 +2431,7 @@
reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 702>;
@@ -2429,7 +2443,7 @@
reg = <0 0xee0c0000 0 0x100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 701>;
- phys = <&usb2_phy2>;
+ phys = <&usb2_phy2 1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 701>;
@@ -2441,7 +2455,7 @@
reg = <0 0xee0e0000 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
- phys = <&usb2_phy3>;
+ phys = <&usb2_phy3 1>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 700>, <&cpg 705>;
@@ -2453,7 +2467,7 @@
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2466,7 +2480,7 @@
reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 2>;
phy-names = "usb";
companion = <&ohci1>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2479,7 +2493,7 @@
reg = <0 0xee0c0100 0 0x100>;
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 701>;
- phys = <&usb2_phy2>;
+ phys = <&usb2_phy2 2>;
phy-names = "usb";
companion = <&ohci2>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2492,7 +2506,7 @@
reg = <0 0xee0e0100 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
- phys = <&usb2_phy3>;
+ phys = <&usb2_phy3 2>;
phy-names = "usb";
companion = <&ohci3>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2508,7 +2522,7 @@
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2519,7 +2533,7 @@
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 702>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2530,7 +2544,7 @@
clocks = <&cpg CPG_MOD 701>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 701>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2542,7 +2556,7 @@
clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 700>, <&cpg 705>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -3168,58 +3182,30 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
+ sustainable-power = <6313>;
trips {
- sensor1_passive: sensor1-passive {
- temperature = <95000>;
- hysteresis = <1000>;
- type = "passive";
- };
sensor1_crit: sensor1-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
-
- cooling-maps {
- map0 {
- trip = <&sensor1_passive>;
- cooling-device = <&a57_0 4 4>,
- <&a57_1 4 4>,
- <&a57_2 4 4>,
- <&a57_3 4 4>;
- };
- };
};
sensor_thermal2: sensor-thermal2 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
+ sustainable-power = <6313>;
trips {
- sensor2_passive: sensor2-passive {
- temperature = <95000>;
- hysteresis = <1000>;
- type = "passive";
- };
sensor2_crit: sensor2-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
-
- cooling-maps {
- map0 {
- trip = <&sensor2_passive>;
- cooling-device = <&a57_0 4 4>,
- <&a57_1 4 4>,
- <&a57_2 4 4>,
- <&a57_3 4 4>;
- };
- };
};
sensor_thermal3: sensor-thermal3 {
@@ -3228,11 +3214,12 @@
thermal-sensors = <&tsc 2>;
trips {
- sensor3_passive: sensor3-passive {
- temperature = <95000>;
+ target: trip-point1 {
+ temperature = <100000>;
hysteresis = <1000>;
type = "passive";
};
+
sensor3_crit: sensor3-crit {
temperature = <120000>;
hysteresis = <1000>;
@@ -3242,11 +3229,15 @@
cooling-maps {
map0 {
- trip = <&sensor3_passive>;
- cooling-device = <&a57_0 4 4>,
- <&a57_1 4 4>,
- <&a57_2 4 4>,
- <&a57_3 4 4>;
+ trip = <&target>;
+ cooling-device = <&a57_0 2 4>;
+ contribution = <1024>;
+ };
+
+ map1 {
+ trip = <&target>;
+ cooling-device = <&a53_0 0 2>;
+ contribution = <1024>;
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index d5e2f4af83a4..26df5b88efd7 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -160,6 +160,7 @@
power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
capacity-dmips-mhz = <1024>;
@@ -186,6 +187,8 @@
power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <277>;
clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
capacity-dmips-mhz = <535>;
@@ -783,7 +786,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
@@ -1319,6 +1322,17 @@
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a7796", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a7796",
"renesas,rcar-gen3-msiof";
@@ -2275,7 +2289,7 @@
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
@@ -2287,7 +2301,7 @@
reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 1>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
@@ -2299,7 +2313,7 @@
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2312,7 +2326,7 @@
reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 2>;
phy-names = "usb";
companion = <&ohci1>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2328,7 +2342,7 @@
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2339,7 +2353,7 @@
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2814,76 +2828,61 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
+ sustainable-power = <3874>;
trips {
- sensor1_passive: sensor1-passive {
- temperature = <95000>;
- hysteresis = <1000>;
- type = "passive";
- };
sensor1_crit: sensor1-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
-
- cooling-maps {
- map0 {
- trip = <&sensor1_passive>;
- cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
- };
- };
};
sensor_thermal2: sensor-thermal2 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
+ sustainable-power = <3874>;
trips {
- sensor2_passive: sensor2-passive {
- temperature = <95000>;
- hysteresis = <1000>;
- type = "passive";
- };
sensor2_crit: sensor2-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
-
- cooling-maps {
- map0 {
- trip = <&sensor2_passive>;
- cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
- };
- };
};
sensor_thermal3: sensor-thermal3 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
+ sustainable-power = <3874>;
trips {
- sensor3_passive: sensor3-passive {
- temperature = <95000>;
+ target: trip-point1 {
+ temperature = <100000>;
hysteresis = <1000>;
type = "passive";
};
+
sensor3_crit: sensor3-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
-
cooling-maps {
map0 {
- trip = <&sensor3_passive>;
- cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
+ trip = <&target>;
+ cooling-device = <&a57_0 2 4>;
+ contribution = <1024>;
+ };
+ map1 {
+ trip = <&target>;
+ cooling-device = <&a53_0 0 2>;
+ contribution = <1024>;
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 2554b1742dbf..131f895ab778 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -111,6 +111,8 @@
power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ #cooling-cells = <2>;
+ dynamic-power-coefficient = <854>;
clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
};
@@ -667,7 +669,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
@@ -1195,6 +1197,17 @@
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77965", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a77965",
"renesas,rcar-gen3-msiof";
@@ -2015,7 +2028,7 @@
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
@@ -2027,7 +2040,7 @@
reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 1>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 702>;
@@ -2039,7 +2052,7 @@
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -2052,7 +2065,7 @@
reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
- phys = <&usb2_phy1>;
+ phys = <&usb2_phy1 2>;
phy-names = "usb";
companion = <&ohci1>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -2068,7 +2081,7 @@
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2079,7 +2092,7 @@
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 702>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -2519,6 +2532,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
+ sustainable-power = <2439>;
trips {
sensor1_crit: sensor1-crit {
@@ -2533,6 +2547,7 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
+ sustainable-power = <2439>;
trips {
sensor2_crit: sensor2-crit {
@@ -2547,14 +2562,30 @@
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;
+ sustainable-power = <2439>;
trips {
+ target: trip-point1 {
+ /* miliCelsius */
+ temperature = <100000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+
sensor3_crit: sensor3-crit {
temperature = <120000>;
hysteresis = <1000>;
type = "critical";
};
};
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&a57_0 2 4>;
+ contribution = <1024>;
+ };
+ };
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index b6d53321576b..233f26fbec17 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index c72772589953..83fc13ac3fa1 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -19,7 +19,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -262,7 +262,6 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 56cb566ffa09..b4318661f35e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -84,9 +84,11 @@
compatible = "arm,cortex-a53";
reg = <0>;
device_type = "cpu";
+ #cooling-cells = <2>;
power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
+ dynamic-power-coefficient = <277>;
clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
@@ -630,7 +632,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
@@ -1537,7 +1539,7 @@
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
@@ -1549,7 +1551,7 @@
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -1565,7 +1567,7 @@
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -1758,7 +1760,7 @@
du: display@feb00000 {
compatible = "renesas,du-r8a77990";
- reg = <0 0xfeb00000 0 0x80000>;
+ reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
@@ -1801,6 +1803,8 @@
resets = <&cpg 727>;
status = "disabled";
+ renesas,companion = <&lvds1>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1856,11 +1860,18 @@
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
- thermal-sensors = <&thermal>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 0>;
+ sustainable-power = <717>;
trips {
- cpu-crit {
+ target: trip-point1 {
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ sensor1_crit: sensor1-crit {
temperature = <120000>;
hysteresis = <2000>;
type = "critical";
@@ -1868,6 +1879,11 @@
};
cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&a53_0 0 2>;
+ contribution = <1024>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
index a7dc11e36fd9..0711170b26b1 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
@@ -511,12 +511,7 @@
status = "okay";
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
+ port {
vin4_in: endpoint {
remote-endpoint = <&adv7180_out>;
};
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index 5bf3af246e14..0a344eb55094 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -354,7 +354,7 @@
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 704>, <&cpg 703>;
@@ -875,7 +875,7 @@
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
@@ -887,7 +887,7 @@
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
- phys = <&usb2_phy0>;
+ phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -903,7 +903,7 @@
clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
resets = <&cpg 703>, <&cpg 704>;
- #phy-cells = <0>;
+ #phy-cells = <1>;
status = "disabled";
};
@@ -1038,6 +1038,8 @@
resets = <&cpg 727>;
status = "disabled";
+ renesas,companion = <&lvds1>;
+
ports {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 2dba1328acfa..5c2c84723ec5 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -39,7 +39,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 7a09576b3112..27851a77f538 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -38,6 +38,18 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ wlan_en: regulator-wlan_en {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
};
&can0 {
@@ -88,6 +100,13 @@
line-name = "Audio_Out_OFF";
};
+ sd-wifi-mux {
+ gpio-hog;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-low; /* Connect WL1837 */
+ line-name = "SD WiFi mux";
+ };
+
hub_pwen {
gpio-hog;
gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -254,6 +273,12 @@
function = "scif1";
};
+ sdhi3_pins: sdhi3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <3300>;
+ };
+
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
@@ -273,6 +298,30 @@
status = "okay";
};
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&wlan_en>;
+ vqmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ max-frequency = <26000000>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index e70e1bac2be4..7e498b46e9ae 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -26,7 +26,7 @@
};
chosen {
- bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5f2687acbf94..daa2c78e22c3 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -16,6 +16,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-inx.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-scarlet-kd.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 5d499c9086fb..bb40c163b05d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -141,10 +141,12 @@
phy-mode = "rgmii";
pinctrl-names = "default";
pinctrl-0 = <&rgmiim1_pins>;
- snps,force_thresh_dma_mode;
+ snps,aal;
snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 50000>;
+ snps,rxpbl = <0x4>;
+ snps,txpbl = <0x4>;
tx_delay = <0x24>;
rx_delay = <0x18>;
status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 994468671b19..e9fefd8a7e02 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -407,6 +407,7 @@
compatible = "snps,dw-wdt";
reg = <0x0 0xff1a0000 0x0 0x100>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_WDT>;
};
pwm0: pwm@ff1b0000 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index 6b059bd7a04f..ebe2ee77ba1f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -146,6 +146,12 @@
};
};
+&spi1 {
+ /* On both Low speed and High speed expansion */
+ cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
+ status = "okay";
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
new file mode 100644
index 000000000000..0d1f5f9a0de9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -0,0 +1,733 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Hugsun X99 TV BOX";
+ compatible = "hugsun,x99", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_5v: dc-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&dc_5v>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc1v8_s0: vcc1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_5v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&gpu {
+ status = "okay";
+ mali-supply = <&vdd_gpu>;
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <180>;
+ i2c-scl-falling-time-ns = <30>;
+ clock-frequency = <400000>;
+
+ vdd_cpu_b: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-initial-mode = <1>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rtc_clko_wifi";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcca1v8_hdmi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v0_sd: LDO_REG5 {
+ regulator-name = "vcc3v0_sd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <40>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+ audio-supply = <&vcc1v8_s0>;
+ bt656-supply = <&vcc1v8_s0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sd>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&pinctrl {
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins =
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gmac {
+ rgmii_sleep_pins: rgmii-sleep-pins {
+ rockchip,pins =
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio {
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reg_on_h: bt-reg-on-h {
+ /* external pullup to VCC1V8_PMUPLL */
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_reg_on_h: wifi-reg_on-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+ pinctrl-0 = <&pwm2_pin_pull_down>;
+};
+
+&saradc {
+ vref-supply = <&vcc1v8_s0>;
+ status = "okay";
+};
+
+&sdmmc {
+ clock-frequency = <150000000>;
+ clock-freq-min-max = <200000 150000000>;
+ supports-sd;
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ vqmmc-supply = <&vcc_sd>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ card-detect-delay = <800>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ supports-emmc;
+ non-removable;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&spdif {
+ status = "okay";
+ pinctrl-0 = <&spdif_bus_1>;
+ #sound-dai-cells = <0>;
+};
+
+&spi1 {
+ status = "okay";
+ max-freq = <10000000>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ rockchip,hw-tshut-temp = <110000>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <4000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
new file mode 100644
index 000000000000..8302e51def52
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-captain.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+ model = "Khadas Edge-Captain";
+ compatible = "khadas,edge-captain", "rockchip,rk3399";
+};
+
+&gmac {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
new file mode 100644
index 000000000000..f5dcb99dc349
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge-v.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+ model = "Khadas Edge-V";
+ compatible = "khadas,edge-v", "rockchip,rk3399";
+};
+
+&gmac {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts
new file mode 100644
index 000000000000..31616e7ad89d
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include "rk3399-khadas-edge.dtsi"
+
+/ {
+ model = "Khadas Edge";
+ compatible = "khadas,edge", "rockchip,rk3399";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
new file mode 100644
index 000000000000..4944d78a0a1c
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -0,0 +1,804 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
+ * (https://www.khadas.com)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys_3v3>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vsys_5v0>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vsys_3v3>;
+ };
+
+ vsys: vsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vsys_3v3: vsys-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vsys>;
+ };
+
+ vsys_5v0: vsys-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys_5v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vsys>;
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <18000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+
+ sys-led {
+ label = "sys_led";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ };
+
+ user-led {
+ label = "user_led";
+ default-state = "off";
+ gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ fan: pwm-fan {
+ compatible = "pwm-fan";
+ cooling-levels = <0 150 200 255>;
+ #cooling-cells = <2>;
+ fan-supply = <&vsys_5v0>;
+ pwms = <&pwm0 0 40000 0>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+ trips {
+ cpu_warm: cpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ cpu_hot: cpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ trip = <&cpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map3 {
+ trip = <&cpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&gpu_thermal {
+ trips {
+ gpu_warm: gpu_warm {
+ temperature = <55000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+
+ gpu_hot: gpu_hot {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map1 {
+ trip = <&gpu_warm>;
+ cooling-device = <&fan THERMAL_NO_LIMIT 1>;
+ };
+
+ map2 {
+ trip = <&gpu_hot>;
+ cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vsys_3v3>;
+ vcc2-supply = <&vsys_3v3>;
+ vcc3-supply = <&vsys_3v3>;
+ vcc4-supply = <&vsys_3v3>;
+ vcc6-supply = <&vsys_3v3>;
+ vcc7-supply = <&vsys_3v3>;
+ vcc8-supply = <&vsys_3v3>;
+ vcc9-supply = <&vsys_3v3>;
+ vcc10-supply = <&vsys_3v3>;
+ vcc11-supply = <&vsys_3v3>;
+ vcc12-supply = <&vsys_3v3>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_apio2: LDO_REG1 {
+ regulator-name = "vcc1v8_apio2";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_vldo2: LDO_REG2 {
+ regulator-name = "vcc_vldo2";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmupll: LDO_REG3 {
+ regulator-name = "vcc1v8_pmupll";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG4 {
+ regulator-name = "vccio_sd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_vldo5: LDO_REG5 {
+ regulator-name = "vcc_vldo5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcc1v8_codec: LDO_REG7 {
+ regulator-name = "vcc1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpu_b_sleep>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vsys_3v3>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpu_sleep>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vsys_3v3>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c8 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ bt656-supply = <&vcc1v8_apio2>;
+ audio-supply = <&vcc1v8_codec>;
+ sdmmc-supply = <&vccio_sd>;
+ gpio1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ bt {
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_reg_on_h: bt-reg-on-h {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ sys_led_gpio: sys_led-gpio {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ user_led_gpio: user_led-gpio {
+ rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ cpu_b_sleep: cpu-b-sleep {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ gpu_sleep: gpu-sleep {
+ rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdio0 {
+ /* WiFi & BT combo module Ampak AP6356S */
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vcc1v8_s3>;
+ vmmc-supply = <&vccio_sd>;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ brcm,drive-strength = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ max-speed = <4000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
+ vbat-supply = <&vsys_3v3>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index e030627159c6..1ae1ebd4efdd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -25,6 +25,15 @@
#clock-cells = <0>;
};
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
vcc12v_dcin: dc-12v {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -169,6 +178,10 @@
status = "okay";
};
+&hdmi_sound {
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
i2c-scl-rising-time-ns = <168>;
@@ -451,12 +464,46 @@
};
&pinctrl {
+ bt {
+ bt_enable_h: bt-enable-h {
+ rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_host_wake_l: bt-host-wake-l {
+ rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_l: bt-wake-l {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pcie {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ sdio0 {
+ sdio0_bus4: sdio0-bus4 {
+ rockchip,pins =
+ <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>,
+ <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_cmd: sdio0-cmd {
+ rockchip,pins =
+ <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>;
+ };
+
+ sdio0_clk: sdio0-clk {
+ rockchip,pins =
+ <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -482,6 +529,17 @@
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&pwm2 {
@@ -494,6 +552,32 @@
vref-supply = <&vcc_1v8>;
};
+&sdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bus-width = <4>;
+ clock-frequency = <50000000>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
@@ -557,6 +641,23 @@
};
};
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ };
+};
+
&uart2 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
index 12285c51cceb..437a75f31ad4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -114,6 +114,55 @@
};
};
+&spi0 {
+ /* On Low speed expansion (LS-SPI0) */
+ status = "okay";
+};
+
+&spi4 {
+ /* On High speed expansion (HS-SPI1) */
+ status = "okay";
+};
+
+&thermal_zones {
+ cpu_thermal: cpu {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsadc 0>;
+ sustainable-power = <1550>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <65000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
&usbdrd_dwc3_0 {
dr_mode = "otg";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
index 20ec7d1c25d7..eb5594062006 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
@@ -513,6 +513,20 @@
gpio1830-supply = <&vcc_3v0>;
};
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_perst>;
+ vpcie12v-supply = <&vcc12v_dcin>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pmu_io_domains {
pmu1830-supply = <&vcc_3v0>;
status = "okay";
@@ -542,6 +556,10 @@
};
pcie {
+ pcie_perst: pcie-perst {
+ rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 04623e52ac5d..1bc1579674e5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -565,12 +565,11 @@
status = "okay";
u2phy0_otg: otg-port {
- phy-supply = <&vcc5v0_typec0>;
status = "okay";
};
u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
+ phy-supply = <&vcc5v0_typec0>;
status = "okay";
};
};
@@ -620,7 +619,7 @@
&usbdrd_dwc3_0 {
status = "okay";
- dr_mode = "otg";
+ dr_mode = "host";
};
&usbdrd3_1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 196ac9b78076..cede1ad81be2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -414,6 +414,9 @@
compatible = "snps,dwc3";
reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
+ <&cru SCLK_USB3OTG0_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
dr_mode = "otg";
phys = <&u2phy0_otg>, <&tcphy0_usb3>;
phy-names = "usb2-phy", "usb3-phy";
@@ -447,6 +450,9 @@
compatible = "snps,dwc3";
reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
+ <&cru SCLK_USB3OTG1_SUSPEND>;
+ clock-names = "ref", "bus_early", "suspend";
dr_mode = "otg";
phys = <&u2phy1_otg>, <&tcphy1_usb3>;
phy-names = "usb2-phy", "usb3-phy";
@@ -821,15 +827,6 @@
type = "critical";
};
};
-
- cooling-maps {
- map0 {
- trip = <&gpu_alert0>;
- cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
};
};
@@ -1706,11 +1703,11 @@
reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "isp0_mmu";
- clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>;
+ clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_ISP0>;
rockchip,disable-mmu-reset;
- status = "disabled";
};
isp1_mmu: iommu@ff924000 {
@@ -1718,11 +1715,11 @@
reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
interrupt-names = "isp1_mmu";
- clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>;
+ clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
clock-names = "aclk", "iface";
#iommu-cells = <0>;
+ power-domains = <&power RK3399_PD_ISP1>;
rockchip,disable-mmu-reset;
- status = "disabled";
};
hdmi_sound: hdmi-sound {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
new file mode 100644
index 000000000000..bb5ebf6608b9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+
+#include "rk3399.dtsi"
+
+/ {
+ compatible = "rockchip,rk3399pro";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie_phy {
+ status = "okay";
+};
+
+/* Default to enabled since AP talk to NPU part over pcie */
+&pcie0 {
+ ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index 7968d524351b..f72f048a0c9d 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -163,4 +163,8 @@
&nand {
status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
index a3cd475b48d2..8ec40a0b8b1e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi
@@ -8,8 +8,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
-/memreserve/ 0x80000000 0x02000000;
-
/ {
compatible = "socionext,uniphier-ld11";
#address-cells = <2>;
@@ -110,6 +108,17 @@
<1 10 4>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure-memory@81000000 {
+ reg = <0x0 0x81000000 0x0 0x01000000>;
+ no-map;
+ };
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -617,6 +626,8 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 017f6328c191..b658f2b641e2 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -9,8 +9,6 @@
#include <dt-bindings/gpio/uniphier-gpio.h>
#include <dt-bindings/thermal/thermal.h>
-/memreserve/ 0x80000000 0x02000000;
-
/ {
compatible = "socionext,uniphier-ld20";
#address-cells = <2>;
@@ -215,6 +213,17 @@
};
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure-memory@81000000 {
+ reg = <0x0 0x81000000 0x0 0x01000000>;
+ no-map;
+ };
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -921,6 +930,8 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 1965e4dfe4a4..754315bbd1c8 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -115,4 +115,8 @@
&nand {
status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ };
};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index bb97abe1a55f..d6f6cee4d549 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -8,8 +8,6 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/uniphier-gpio.h>
-/memreserve/ 0x80000000 0x02000000;
-
/ {
compatible = "socionext,uniphier-pxs3";
#address-cells = <2>;
@@ -138,6 +136,17 @@
<1 10 4>;
};
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure-memory@81000000 {
+ reg = <0x0 0x81000000 0x0 0x01000000>;
+ no-map;
+ };
+ };
+
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
@@ -779,6 +788,8 @@
status = "disabled";
reg-names = "nand_data", "denali_reg";
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi
index 286d7173f94f..231436be0e3f 100644
--- a/arch/arm64/boot/dts/sprd/sc9836.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi
@@ -60,7 +60,7 @@
};
funnel@10001000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x10001000 0 0x1000>;
clocks = <&clk26mhz>;
clock-names = "apb_pclk";
diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
index b25d19977170..e27eb3ed1d47 100644
--- a/arch/arm64/boot/dts/sprd/sc9860.dtsi
+++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
@@ -300,7 +300,7 @@
};
funnel@10001000 { /* SoC Funnel */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x10001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
@@ -367,7 +367,7 @@
};
funnel@11001000 { /* Cluster0 Funnel */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x11001000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
@@ -415,7 +415,7 @@
};
funnel@11002000 { /* Cluster1 Funnel */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x11002000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
@@ -513,7 +513,7 @@
};
funnel@11005000 { /* Main Funnel */
- compatible = "arm,coresight-funnel", "arm,primecell";
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0 0x11005000 0 0x1000>;
clocks = <&ext_26m>;
clock-names = "apb_pclk";
diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
index 4bb862c6b083..79b9591c37aa 100644
--- a/arch/arm64/boot/dts/sprd/whale2.dtsi
+++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
@@ -130,6 +130,34 @@
clock-names = "enable";
clocks = <&apahb_gate CLK_DMA_EB>;
};
+
+ sdio3: sdio@50430000 {
+ compatible = "sprd,sdhci-r11";
+ reg = <0 0x50430000 0 0x1000>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+
+ clock-names = "sdio", "enable", "2x_enable";
+ clocks = <&aon_prediv CLK_EMMC_2X>,
+ <&apahb_gate CLK_EMMC_EB>,
+ <&aon_gate CLK_EMMC_2X_EN>;
+ assigned-clocks = <&aon_prediv CLK_EMMC_2X>;
+ assigned-clock-parents = <&clk_l0_409m6>;
+
+ sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>;
+ sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>;
+ sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>;
+ sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>;
+ vmmc-supply = <&vddemmccore>;
+ bus-width = <8>;
+ non-removable;
+ no-sdio;
+ no-sd;
+ cap-mmc-hw-reset;
+ mmc-hs400-enhanced-strobe;
+ mmc-hs400-1_8v;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ };
};
aon {
@@ -272,4 +300,11 @@
clock-frequency = <100000000>;
clock-output-names = "ext-rco-100m";
};
+
+ clk_l0_409m6: clk_l0_409m6 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <409600000>;
+ clock-output-names = "ext-409m6";
+ };
};
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 63e619d0b5b8..b397945fdf73 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -7,3 +7,5 @@
#
dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
+
+dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 752455269fab..ca70ff73f171 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -4,6 +4,7 @@
*
* Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
*/
+#include <dt-bindings/phy/phy-am654-serdes.h>
&cbass_main {
msmc_ram: sram@70000000 {
@@ -44,6 +45,7 @@
gic_its: gic-its@18200000 {
compatible = "arm,gic-v3-its";
reg = <0x00 0x01820000 0x00 0x10000>;
+ socionext,synquacer-pre-its = <0x1000000 0x400000>;
msi-controller;
#msi-cells = <1>;
};
@@ -60,6 +62,36 @@
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
};
+ serdes0: serdes@900000 {
+ compatible = "ti,phy-am654-serdes";
+ reg = <0x0 0x900000 0x0 0x2000>;
+ reg-names = "serdes";
+ #phy-cells = <2>;
+ power-domains = <&k3_pds 153>;
+ clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+ clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+ assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+ assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+ ti,serdes-clk = <&serdes0_clk>;
+ #clock-cells = <1>;
+ mux-controls = <&serdes_mux 0>;
+ };
+
+ serdes1: serdes@910000 {
+ compatible = "ti,phy-am654-serdes";
+ reg = <0x0 0x910000 0x0 0x2000>;
+ reg-names = "serdes";
+ #phy-cells = <2>;
+ power-domains = <&k3_pds 154>;
+ clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+ clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+ assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+ assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+ ti,serdes-clk = <&serdes1_clk>;
+ #clock-cells = <1>;
+ mux-controls = <&serdes_mux 1>;
+ };
+
main_uart0: serial@2800000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
@@ -232,6 +264,38 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+ pcie0_mode: pcie-mode@4060 {
+ compatible = "syscon";
+ reg = <0x00004060 0x4>;
+ };
+
+ pcie1_mode: pcie-mode@4070 {
+ compatible = "syscon";
+ reg = <0x00004070 0x4>;
+ };
+
+ pcie_devid: pcie-devid@210 {
+ compatible = "syscon";
+ reg = <0x00000210 0x4>;
+ };
+
+ serdes0_clk: serdes_clk@4080 {
+ compatible = "syscon";
+ reg = <0x00004080 0x4>;
+ };
+
+ serdes1_clk: serdes_clk@4090 {
+ compatible = "syscon";
+ reg = <0x00004090 0x4>;
+ };
+
+ serdes_mux: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
+ <0x4090 0x3>; /* SERDES1 lane select */
+ };
};
dwc3_0: dwc3@4000000 {
@@ -309,4 +373,141 @@
clock-names = "wkupclk", "refclk";
#phy-cells = <0>;
};
+
+ intr_main_gpio: interrupt-controller0 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <56>;
+ ti,sci-rm-range-girq = <0x1>;
+ };
+
+ cbass_main_navss: interconnect0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ intr_main_navss: interrupt-controller1 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <4>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <56>;
+ ti,sci-rm-range-girq = <0x0>, <0x2>;
+ };
+
+ inta_main_udmass: interrupt-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ interrupt-parent = <&intr_main_navss>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <179>;
+ ti,sci-rm-range-vint = <0x0>;
+ ti,sci-rm-range-global-event = <0x1>;
+ };
+ };
+
+ main_gpio0: main_gpio0@600000 {
+ compatible = "ti,am654-gpio", "ti,keystone-gpio";
+ reg = <0x0 0x600000 0x0 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&intr_main_gpio>;
+ interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>,
+ <57 261>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <96>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k3_clks 57 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio1: main_gpio1@601000 {
+ compatible = "ti,am654-gpio", "ti,keystone-gpio";
+ reg = <0x0 0x601000 0x0 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&intr_main_gpio>;
+ interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>,
+ <58 261>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <90>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k3_clks 58 0>;
+ clock-names = "gpio";
+ };
+
+ pcie0_rc: pcie@5500000 {
+ compatible = "ti,am654-pcie-rc";
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu";
+ power-domains = <&k3_pds 120>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000
+ 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&pcie_devid>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ bus-range = <0x0 0xff>;
+ num-viewport = <16>;
+ max-link-speed = <3>;
+ dma-coherent;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ };
+
+ pcie0_ep: pcie-ep@5500000 {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 120>;
+ ti,syscon-pcie-mode = <&pcie0_mode>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ max-link-speed = <3>;
+ dma-coherent;
+ interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie1_rc: pcie@5600000 {
+ compatible = "ti,am654-pcie-rc";
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+ reg-names = "app", "dbics", "config", "atu";
+ power-domains = <&k3_pds 121>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000
+ 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&pcie_devid>;
+ ti,syscon-pcie-mode = <&pcie1_mode>;
+ bus-range = <0x0 0xff>;
+ num-viewport = <16>;
+ max-link-speed = <3>;
+ dma-coherent;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+ msi-map = <0x0 &gic_its 0x10000 0x10000>;
+ };
+
+ pcie1_ep: pcie-ep@5600000 {
+ compatible = "ti,am654-pcie-ep";
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+ reg-names = "app", "dbics", "addr_space", "atu";
+ power-domains = <&k3_pds 121>;
+ ti,syscon-pcie-mode = <&pcie1_mode>;
+ num-ib-windows = <16>;
+ num-ob-windows = <16>;
+ max-link-speed = <3>;
+ dma-coherent;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 6f7d2b316ded..afc29eaa2638 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -17,6 +17,14 @@
power-domains = <&k3_pds 149>;
};
+ mcu_ram: sram@41c00000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x41c00000 0x00 0x80000>;
+ ranges = <0x0 0x00 0x41c00000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
mcu_i2c0: i2c@40b00000 {
compatible = "ti,am654-i2c", "ti,omap4-i2c";
reg = <0x0 0x40b00000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 7cbdc0912ab7..9cf2c0849a24 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -7,7 +7,7 @@
&cbass_wakeup {
dmsc: dmsc {
- compatible = "ti,k2g-sci";
+ compatible = "ti,am654-sci";
ti,host-id = <12>;
#address-cells = <1>;
#size-cells = <1>;
@@ -63,4 +63,30 @@
clocks = <&k3_clks 115 1>;
power-domains = <&k3_pds 115>;
};
+
+ intr_wkup_gpio: interrupt-controller2 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <56>;
+ ti,sci-rm-range-girq = <0x4>;
+ };
+
+ wkup_gpio0: wkup_gpio0@42110000 {
+ compatible = "ti,am654-gpio", "ti,keystone-gpio";
+ reg = <0x42110000 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&intr_wkup_gpio>;
+ interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ ti,ngpio = <56>;
+ ti,davinci-gpio-unbanked = <0>;
+ clocks = <&k3_clks 59 0>;
+ clock-names = "gpio";
+ };
};
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 50f4be2047a9..82edf10b2378 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -68,9 +68,14 @@
<0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
<0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
<0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
+ <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
/* MCUSS Range */
<0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
@@ -82,6 +87,9 @@
#size-cells = <2>;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
<0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
<0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
<0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index cf1aa276a1ea..52c245d36db9 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "k3-am654.dtsi"
+#include <dt-bindings/input/input.h>
/ {
compatible = "ti,am654-evm", "ti,am654";
@@ -33,6 +34,25 @@
no-map;
};
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins_default>;
+
+ sw5 {
+ label = "GPIO Key USER1";
+ linux,code = <BTN_0>;
+ gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+
+ sw6 {
+ label = "GPIO Key USER2";
+ linux,code = <BTN_1>;
+ gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&wkup_pmx0 {
@@ -42,6 +62,13 @@
AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
>;
};
+
+ push_button_pins_default: push_button__pins_default {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
+ AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
+ >;
+ };
};
&main_pmx0 {
@@ -228,3 +255,27 @@
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
+
+&serdes0 {
+ status = "disabled";
+};
+
+&serdes1 {
+ status = "disabled";
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie0_ep {
+ status = "disabled";
+};
+
+&pcie1_rc {
+ status = "disabled";
+};
+
+&pcie1_ep {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
new file mode 100644
index 000000000000..c680123f067c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e-som-p0.dtsi"
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+ };
+};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "disabled";
+};
+
+&main_uart3 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart5 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart6 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart7 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart8 {
+ /* UART not brought out */
+ status = "disabled";
+};
+
+&main_uart9 {
+ /* UART not brought out */
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
new file mode 100644
index 000000000000..a01308142f77
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_main {
+ msmc_ram: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x70000000 0x0 0x800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x70000000 0x800000>;
+
+ atf-sram@0 {
+ reg = <0x0 0x20000>;
+ };
+ };
+
+ gic500: interrupt-controller@1800000 {
+ compatible = "arm,gic-v3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
+ <0x00 0x01900000 0x00 0x100000>; /* GICR */
+
+ /* vcpumntirq: virtual CPU interface maintenance interrupt */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ gic_its: gic-its@18200000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x00 0x01820000 0x00 0x10000>;
+ socionext,synquacer-pre-its = <0x1000000 0x400000>;
+ msi-controller;
+ #msi-cells = <1>;
+ };
+ };
+
+ smmu0: smmu@36600000 {
+ compatible = "arm,smmu-v3";
+ reg = <0x0 0x36600000 0x0 0x100000>;
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eventq", "gerror";
+ #iommu-cells = <1>;
+ };
+
+ main_gpio_intr: interrupt-controller0 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <14>;
+ ti,sci-rm-range-girq = <0x1>;
+ };
+
+ cbass_main_navss: interconnect0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ main_navss_intr: interrupt-controller1 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <4>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <14>;
+ ti,sci-rm-range-girq = <0>, <2>;
+ };
+
+ main_udmass_inta: interrupt-controller@33d00000 {
+ compatible = "ti,sci-inta";
+ reg = <0x0 0x33d00000 0x0 0x100000>;
+ interrupt-controller;
+ interrupt-parent = <&main_navss_intr>;
+ msi-controller;
+ ti,sci = <&dmsc>;
+ ti,sci-dev-id = <209>;
+ ti,sci-rm-range-vint = <0xa>;
+ ti,sci-rm-range-global-event = <0xd>;
+ };
+ };
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ main_pmx0: pinmux@11c000 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x0 0x11c000 0x0 0x2b4>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 146>;
+ clocks = <&k3_clks 146 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 278>;
+ clocks = <&k3_clks 278 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 279>;
+ clocks = <&k3_clks 279 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart3: serial@2830000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02830000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 280>;
+ clocks = <&k3_clks 280 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart4: serial@2840000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02840000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 281>;
+ clocks = <&k3_clks 281 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart5: serial@2850000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02850000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 282>;
+ clocks = <&k3_clks 282 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart6: serial@2860000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02860000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 283>;
+ clocks = <&k3_clks 283 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart7: serial@2870000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02870000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 284>;
+ clocks = <&k3_clks 284 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart8: serial@2880000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02880000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 285>;
+ clocks = <&k3_clks 285 0>;
+ clock-names = "fclk";
+ };
+
+ main_uart9: serial@2890000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x02890000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 286>;
+ clocks = <&k3_clks 286 0>;
+ clock-names = "fclk";
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
new file mode 100644
index 000000000000..07b58eeebceb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+ dmsc: dmsc@44083000 {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ reg-names = "debug_messages";
+ reg = <0x00 0x44083000 0x0 0x1000>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ wkup_pmx0: pinmux@4301c000 {
+ compatible = "pinctrl-single";
+ /* Proxy 0 addressing */
+ reg = <0x00 0x4301c000 0x00 0x178>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0xffffffff>;
+ };
+
+ mcu_ram: sram@41c00000 {
+ compatible = "mmio-sram";
+ reg = <0x00 0x41c00000 0x00 0x100000>;
+ ranges = <0x0 0x00 0x41c00000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 287>;
+ clocks = <&k3_clks 287 0>;
+ clock-names = "fclk";
+ };
+
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,j721e-uart", "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 149>;
+ clocks = <&k3_clks 149 0>;
+ clock-names = "fclk";
+ };
+
+ wkup_gpio_intr: interrupt-controller2 {
+ compatible = "ti,sci-intr";
+ ti,intr-trigger-type = <1>;
+ interrupt-controller;
+ interrupt-parent = <&gic500>;
+ #interrupt-cells = <2>;
+ ti,sci = <&dmsc>;
+ ti,sci-dst-id = <14>;
+ ti,sci-rm-range-girq = <0x5>;
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
new file mode 100644
index 000000000000..1884fc70148f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+
+/ {
+ memory@80000000 {
+ device_type = "memory";
+ /* 4G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+ <0x00000008 0x80000000 0x00000000 0x80000000>;
+ };
+
+ reserved_memory: reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure_ddr: optee@9e800000 {
+ reg = <0x00 0x9e800000 0x00 0x01800000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
new file mode 100644
index 000000000000..f8dd74b17bfb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+
+/ {
+ model = "Texas Instruments K3 J721E SoC";
+ compatible = "ti,j721e";
+ interrupt-parent = <&gic500>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial4 = &main_uart2;
+ serial5 = &main_uart3;
+ serial6 = &main_uart4;
+ serial7 = &main_uart5;
+ serial8 = &main_uart6;
+ serial9 = &main_uart7;
+ serial10 = &main_uart8;
+ serial11 = &main_uart9;
+ };
+
+ chosen { };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a72";
+ reg = <0x000>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&L2_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a72";
+ reg = <0x001>;
+ device_type = "cpu";
+ enable-method = "psci";
+ i-cache-size = <0xC000>;
+ i-cache-line-size = <64>;
+ i-cache-sets = <256>;
+ d-cache-size = <0x8000>;
+ d-cache-line-size = <64>;
+ d-cache-sets = <128>;
+ next-level-cache = <&L2_0>;
+ };
+ };
+
+ L2_0: l2-cache0 {
+ compatible = "cache";
+ cache-level = <2>;
+ cache-size = <0x100000>;
+ cache-line-size = <64>;
+ cache-sets = <2048>;
+ next-level-cache = <&msmc_l3>;
+ };
+
+ msmc_l3: l3-cache0 {
+ compatible = "cache";
+ cache-level = <3>;
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+
+ psci: psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+ };
+
+ a72_timer0: timer-cl0-cpu0 {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+ };
+
+ pmu: pmu {
+ compatible = "arm,armv8-pmuv3";
+ /* Recommendation from GIC500 TRM Table A.3 */
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ cbass_main: interconnect@100000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+ <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+ <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+ <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+ <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+ <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+ <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
+ <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+ <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+
+ /* MCUSS_WKUP Range */
+ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+ cbass_mcu_wakeup: interconnect@28380000 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+ <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+ <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+ <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+ <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+ <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+ <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+ <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+ };
+ };
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j721e-main.dtsi"
+#include "k3-j721e-mcu-wakeup.dtsi"
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index dd827e64e5fe..ca2df23e456e 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -698,6 +698,7 @@ CONFIG_ARCH_TEGRA_210_SOC=y
CONFIG_ARCH_TEGRA_186_SOC=y
CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_K3_AM6_SOC=y
+CONFIG_ARCH_K3_J721E_SOC=y
CONFIG_SOC_TI=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index d7d50d48d05d..cf545f428d03 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -9,6 +9,11 @@ config ARCH_K3_AM6_SOC
help
Enable support for TI's AM6 SoC Family support
+config ARCH_K3_J721E_SOC
+ bool "K3 J721E SoC"
+ help
+ Enable support for TI's J721E SoC Family support
+
endif
endif
diff --git a/include/dt-bindings/gpio/tegra186-gpio.h b/include/dt-bindings/gpio/tegra186-gpio.h
index cabc5712e745..0782b05e2775 100644
--- a/include/dt-bindings/gpio/tegra186-gpio.h
+++ b/include/dt-bindings/gpio/tegra186-gpio.h
@@ -41,34 +41,6 @@
#define TEGRA186_MAIN_GPIO(port, offset) \
((TEGRA186_MAIN_GPIO_PORT_##port * 8) + offset)
-/* need to keep these for backwards-compatibility */
-#define TEGRA_MAIN_GPIO_PORT_A 0
-#define TEGRA_MAIN_GPIO_PORT_B 1
-#define TEGRA_MAIN_GPIO_PORT_C 2
-#define TEGRA_MAIN_GPIO_PORT_D 3
-#define TEGRA_MAIN_GPIO_PORT_E 4
-#define TEGRA_MAIN_GPIO_PORT_F 5
-#define TEGRA_MAIN_GPIO_PORT_G 6
-#define TEGRA_MAIN_GPIO_PORT_H 7
-#define TEGRA_MAIN_GPIO_PORT_I 8
-#define TEGRA_MAIN_GPIO_PORT_J 9
-#define TEGRA_MAIN_GPIO_PORT_K 10
-#define TEGRA_MAIN_GPIO_PORT_L 11
-#define TEGRA_MAIN_GPIO_PORT_M 12
-#define TEGRA_MAIN_GPIO_PORT_N 13
-#define TEGRA_MAIN_GPIO_PORT_O 14
-#define TEGRA_MAIN_GPIO_PORT_P 15
-#define TEGRA_MAIN_GPIO_PORT_Q 16
-#define TEGRA_MAIN_GPIO_PORT_R 17
-#define TEGRA_MAIN_GPIO_PORT_T 18
-#define TEGRA_MAIN_GPIO_PORT_X 19
-#define TEGRA_MAIN_GPIO_PORT_Y 20
-#define TEGRA_MAIN_GPIO_PORT_BB 21
-#define TEGRA_MAIN_GPIO_PORT_CC 22
-
-#define TEGRA_MAIN_GPIO(port, offset) \
- ((TEGRA_MAIN_GPIO_PORT_##port * 8) + offset)
-
/* GPIOs implemented by AON GPIO controller */
#define TEGRA186_AON_GPIO_PORT_S 0
#define TEGRA186_AON_GPIO_PORT_U 1
@@ -82,17 +54,4 @@
#define TEGRA186_AON_GPIO(port, offset) \
((TEGRA186_AON_GPIO_PORT_##port * 8) + offset)
-/* need to keep these for backwards-compatibility */
-#define TEGRA_AON_GPIO_PORT_S 0
-#define TEGRA_AON_GPIO_PORT_U 1
-#define TEGRA_AON_GPIO_PORT_V 2
-#define TEGRA_AON_GPIO_PORT_W 3
-#define TEGRA_AON_GPIO_PORT_Z 4
-#define TEGRA_AON_GPIO_PORT_AA 5
-#define TEGRA_AON_GPIO_PORT_EE 6
-#define TEGRA_AON_GPIO_PORT_FF 7
-
-#define TEGRA_AON_GPIO(port, offset) \
- ((TEGRA_AON_GPIO_PORT_##port * 8) + offset)
-
#endif