diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | drivers/firmware/qcom_scm.c | 4 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 4 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 6 | ||||
| -rw-r--r-- | include/linux/soc/qcom/wcnss_ctrl.h | 13 |
5 files changed, 27 insertions, 1 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c44795306342..7b3256abfc38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1600,6 +1600,7 @@ F: arch/arm/mach-qcom/ F: arch/arm64/boot/dts/qcom/* F: drivers/i2c/busses/i2c-qup.c F: drivers/clk/qcom/ +F: drivers/pinctrl/qcom/ F: drivers/soc/qcom/ F: drivers/spi/spi-qup.c F: drivers/tty/serial/msm_serial.h diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index d95c70227c05..9bf66aefdbd0 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -356,7 +356,9 @@ static int qcom_scm_probe(struct platform_device *pdev) scm->reset.ops = &qcom_scm_pas_reset_ops; scm->reset.nr_resets = 1; scm->reset.of_node = pdev->dev.of_node; - reset_controller_register(&scm->reset); + ret = devm_reset_controller_register(&pdev->dev, &scm->reset); + if (ret) + return ret; /* vote for max clk rate for highest performance */ ret = clk_set_rate(scm->core_clk, INT_MAX); diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index aafa76cb569d..d33f17c8a515 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -89,6 +89,10 @@ #define PMA8084_GPIO_S4 2 #define PMA8084_GPIO_L6 3 +#define PM8994_GPIO_VPH 0 +#define PM8994_GPIO_S4 2 +#define PM8994_GPIO_L12 3 + /* To be used with "function" */ #define PMIC_GPIO_FUNC_NORMAL "normal" #define PMIC_GPIO_FUNC_PAIRED "paired" diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index a15c1704d0ec..2e360d8f7801 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -65,6 +65,12 @@ #define PMA8084_MPP_S4 2 #define PMA8084_MPP_L6 3 +#define PM8994_MPP_VPH 0 +/* Only supported for MPP_05-MPP_08 */ +#define PM8994_MPP_L19 1 +#define PM8994_MPP_S4 2 +#define PM8994_MPP_L12 3 + /* * Analog Input - Set the source for analog input. * To be used with "qcom,amux-route" property diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h index a37bc5538f19..eab64976a73b 100644 --- a/include/linux/soc/qcom/wcnss_ctrl.h +++ b/include/linux/soc/qcom/wcnss_ctrl.h @@ -3,6 +3,19 @@ #include <linux/soc/qcom/smd.h> +#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL) + struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb); +#else + +static inline struct qcom_smd_channel* +qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb) +{ + WARN_ON(1); + return ERR_PTR(-ENXIO); +} + +#endif + #endif |