summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/nvme/host/fabrics.c59
-rw-r--r--drivers/nvme/host/fabrics.h13
-rw-r--r--drivers/nvme/host/fc.c9
-rw-r--r--drivers/nvme/host/rdma.c7
-rw-r--r--drivers/nvme/target/loop.c7
5 files changed, 45 insertions, 50 deletions
diff --git a/drivers/nvme/host/fabrics.c b/drivers/nvme/host/fabrics.c
index fa32c1216409..6b4e253b9347 100644
--- a/drivers/nvme/host/fabrics.c
+++ b/drivers/nvme/host/fabrics.c
@@ -536,38 +536,40 @@ static struct nvmf_transport_ops *nvmf_lookup_transport(
return NULL;
}
-blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl, struct request *rq,
- bool queue_live, bool is_connected)
+/*
+ * For something we're not in a state to send to the device the default action
+ * is to busy it and retry it after the controller state is recovered. However,
+ * anything marked for failfast or nvme multipath is immediately failed.
+ *
+ * Note: commands used to initialize the controller will be marked for failfast.
+ * Note: nvme cli/ioctl commands are marked for failfast.
+ */
+blk_status_t nvmf_fail_nonready_command(struct request *rq)
{
- struct nvme_command *cmd = nvme_req(rq)->cmd;
+ if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
+ return BLK_STS_RESOURCE;
+ nvme_req(rq)->status = NVME_SC_ABORT_REQ;
+ return BLK_STS_IOERR;
+}
+EXPORT_SYMBOL_GPL(nvmf_fail_nonready_command);
- if (likely(ctrl->state == NVME_CTRL_LIVE && is_connected))
- return BLK_STS_OK;
+bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
+ bool queue_live)
+{
+ struct nvme_command *cmd = nvme_req(rq)->cmd;
switch (ctrl->state) {
case NVME_CTRL_NEW:
case NVME_CTRL_CONNECTING:
case NVME_CTRL_DELETING:
/*
- * This is the case of starting a new or deleting an association
- * but connectivity was lost before it was fully created or torn
- * down. We need to error the commands used to initialize the
- * controller so the reconnect can go into a retry attempt. The
- * commands should all be marked REQ_FAILFAST_DRIVER, which will
- * hit the reject path below. Anything else will be queued while
- * the state settles.
- */
- if (!is_connected)
- break;
-
- /*
* If queue is live, allow only commands that are internally
* generated pass through. These are commands on the admin
* queue to initialize the controller. This will reject any
* ioctl admin cmds received while initializing.
*/
if (queue_live && !(nvme_req(rq)->flags & NVME_REQ_USERCMD))
- return BLK_STS_OK;
+ return true;
/*
* If the queue is not live, allow only a connect command. This
@@ -577,26 +579,13 @@ blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl, struct request *rq,
if (!queue_live && blk_rq_is_passthrough(rq) &&
cmd->common.opcode == nvme_fabrics_command &&
cmd->fabrics.fctype == nvme_fabrics_type_connect)
- return BLK_STS_OK;
- break;
+ return true;
+ return false;
default:
- break;
+ return false;
}
-
- /*
- * Any other new io is something we're not in a state to send to the
- * device. Default action is to busy it and retry it after the
- * controller state is recovered. However, anything marked for failfast
- * or nvme multipath is immediately failed. Note: commands used to
- * initialize the controller will be marked for failfast.
- * Note: nvme cli/ioctl commands are marked for failfast.
- */
- if (!blk_noretry_request(rq) && !(rq->cmd_flags & REQ_NVME_MPATH))
- return BLK_STS_RESOURCE;
- nvme_req(rq)->status = NVME_SC_ABORT_REQ;
- return BLK_STS_IOERR;
}
-EXPORT_SYMBOL_GPL(nvmf_check_if_ready);
+EXPORT_SYMBOL_GPL(__nvmf_check_ready);
static const match_table_t opt_tokens = {
{ NVMF_OPT_TRANSPORT, "transport=%s" },
diff --git a/drivers/nvme/host/fabrics.h b/drivers/nvme/host/fabrics.h
index 7491a0bbf711..2ea949a3868c 100644
--- a/drivers/nvme/host/fabrics.h
+++ b/drivers/nvme/host/fabrics.h
@@ -162,7 +162,16 @@ void nvmf_unregister_transport(struct nvmf_transport_ops *ops);
void nvmf_free_options(struct nvmf_ctrl_options *opts);
int nvmf_get_address(struct nvme_ctrl *ctrl, char *buf, int size);
bool nvmf_should_reconnect(struct nvme_ctrl *ctrl);
-blk_status_t nvmf_check_if_ready(struct nvme_ctrl *ctrl,
- struct request *rq, bool queue_live, bool is_connected);
+blk_status_t nvmf_fail_nonready_command(struct request *rq);
+bool __nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
+ bool queue_live);
+
+static inline bool nvmf_check_ready(struct nvme_ctrl *ctrl, struct request *rq,
+ bool queue_live)
+{
+ if (likely(ctrl->state == NVME_CTRL_LIVE))
+ return true;
+ return __nvmf_check_ready(ctrl, rq, queue_live);
+}
#endif /* _NVME_FABRICS_H */
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 318e827e74ec..b528a2f5826c 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2266,14 +2266,13 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx,
struct nvme_fc_cmd_iu *cmdiu = &op->cmd_iu;
struct nvme_command *sqe = &cmdiu->sqe;
enum nvmefc_fcp_datadir io_dir;
+ bool queue_ready = test_bit(NVME_FC_Q_LIVE, &queue->flags);
u32 data_len;
blk_status_t ret;
- ret = nvmf_check_if_ready(&queue->ctrl->ctrl, rq,
- test_bit(NVME_FC_Q_LIVE, &queue->flags),
- ctrl->rport->remoteport.port_state == FC_OBJSTATE_ONLINE);
- if (unlikely(ret))
- return ret;
+ if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE ||
+ !nvmf_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
+ return nvmf_fail_nonready_command(rq);
ret = nvme_setup_cmd(ns, rq, sqe);
if (ret)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 7cd4199db225..c9424da0d23e 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -1630,15 +1630,14 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx,
struct nvme_rdma_qe *sqe = &req->sqe;
struct nvme_command *c = sqe->data;
struct ib_device *dev;
+ bool queue_ready = test_bit(NVME_RDMA_Q_LIVE, &queue->flags);
blk_status_t ret;
int err;
WARN_ON_ONCE(rq->tag < 0);
- ret = nvmf_check_if_ready(&queue->ctrl->ctrl, rq,
- test_bit(NVME_RDMA_Q_LIVE, &queue->flags), true);
- if (unlikely(ret))
- return ret;
+ if (!nvmf_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
+ return nvmf_fail_nonready_command(rq);
dev = queue->device->dev;
ib_dma_sync_single_for_cpu(dev, sqe->dma,
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 1304ec3a7ede..d8d91f04bd7e 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -158,12 +158,11 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx,
struct nvme_loop_queue *queue = hctx->driver_data;
struct request *req = bd->rq;
struct nvme_loop_iod *iod = blk_mq_rq_to_pdu(req);
+ bool queue_ready = test_bit(NVME_LOOP_Q_LIVE, &queue->flags);
blk_status_t ret;
- ret = nvmf_check_if_ready(&queue->ctrl->ctrl, req,
- test_bit(NVME_LOOP_Q_LIVE, &queue->flags), true);
- if (unlikely(ret))
- return ret;
+ if (!nvmf_check_ready(&queue->ctrl->ctrl, req, queue_ready))
+ return nvmf_fail_nonready_command(req);
ret = nvme_setup_cmd(ns, req, &iod->cmd);
if (ret)