summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/obsolete/sysfs-gpio2
-rw-r--r--Documentation/ABI/testing/sysfs-devices-system-cpu3
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt9
-rw-r--r--Documentation/crypto/crypto_engine.rst8
-rw-r--r--Documentation/devicetree/bindings/clock/st/st,clkgen.txt8
-rw-r--r--Documentation/devicetree/bindings/clock/ti/gate.txt2
-rw-r--r--Documentation/devicetree/bindings/clock/ti/interface.txt2
-rw-r--r--Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt2
-rw-r--r--Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt2
-rw-r--r--Documentation/devicetree/bindings/display/bridge/tda998x.txt2
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt2
-rw-r--r--Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt2
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt2
-rw-r--r--Documentation/devicetree/bindings/input/rotary-encoder.txt2
-rw-r--r--Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/as3722.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/mt6397.txt2
-rw-r--r--Documentation/devicetree/bindings/mfd/sun6i-prcm.txt4
-rw-r--r--Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt2
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-st.txt2
-rw-r--r--Documentation/devicetree/bindings/net/dsa/ksz.txt2
-rw-r--r--Documentation/devicetree/bindings/net/dsa/mt7530.txt2
-rw-r--r--Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/hisilicon-pcie.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/kirin-pcie.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/pci-keystone.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt4
-rw-r--r--Documentation/devicetree/bindings/power/fsl,imx-gpc.txt2
-rw-r--r--Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt2
-rw-r--r--Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt2
-rw-r--r--Documentation/devicetree/bindings/power/supply/ab8500/charger.txt2
-rw-r--r--Documentation/devicetree/bindings/power/wakeup-source.txt2
-rw-r--r--Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/st,stm32-i2s.txt2
-rw-r--r--Documentation/devicetree/bindings/sound/st,stm32-sai.txt2
-rw-r--r--Documentation/devicetree/bindings/spi/spi-st-ssc.txt2
-rw-r--r--Documentation/devicetree/bindings/usb/rockchip,dwc3.txt2
-rw-r--r--Documentation/driver-api/gpio/consumer.rst2
-rw-r--r--Documentation/hwmon/ina2xx2
-rw-r--r--Documentation/kprobes.txt4
-rw-r--r--Documentation/maintainer/pull-requests.rst2
-rw-r--r--Documentation/networking/can.rst4
-rwxr-xr-xDocumentation/sphinx/rstFlatTable.py2
-rw-r--r--Documentation/trace/coresight.txt2
-rw-r--r--Documentation/trace/events.rst2
-rw-r--r--Documentation/trace/ftrace-uses.rst2
-rw-r--r--Documentation/trace/histogram.txt2
-rw-r--r--Documentation/trace/intel_th.rst2
-rw-r--r--Documentation/trace/tracepoint-analysis.rst8
-rw-r--r--Documentation/translations/ja_JP/howto.rst4
-rw-r--r--Documentation/translations/ko_KR/howto.rst2
-rw-r--r--Documentation/translations/zh_CN/SubmittingDrivers2
-rw-r--r--Documentation/translations/zh_CN/gpio.txt4
-rw-r--r--Documentation/translations/zh_CN/io_ordering.txt2
-rw-r--r--Documentation/translations/zh_CN/magic-number.txt4
-rw-r--r--Documentation/translations/zh_CN/video4linux/omap3isp.txt4
-rw-r--r--Documentation/translations/zh_CN/video4linux/v4l2-framework.txt6
-rw-r--r--MAINTAINERS62
-rw-r--r--arch/Kconfig2
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/include/asm/cacheflush.h2
-rw-r--r--arch/arm64/include/asm/cacheflush.h2
-rw-r--r--arch/microblaze/include/asm/cacheflush.h2
-rw-r--r--arch/parisc/Kconfig2
-rw-r--r--arch/sh/Kconfig2
-rw-r--r--arch/sparc/Kconfig2
-rw-r--r--arch/um/Kconfig.um2
-rw-r--r--arch/unicore32/include/asm/cacheflush.h2
-rw-r--r--arch/x86/entry/vsyscall/vsyscall_64.c2
-rw-r--r--arch/xtensa/include/asm/cacheflush.h4
-rw-r--r--block/Kconfig2
-rw-r--r--certs/Kconfig2
-rw-r--r--crypto/asymmetric_keys/asymmetric_type.c2
-rw-r--r--crypto/asymmetric_keys/signature.c2
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/clk/clk.c4
-rw-r--r--drivers/clk/ingenic/cgu.h2
-rw-r--r--drivers/dma/dmaengine.c2
-rw-r--r--drivers/gpu/vga/Kconfig2
-rw-r--r--drivers/gpu/vga/vgaarb.c2
-rw-r--r--drivers/hid/usbhid/Kconfig2
-rw-r--r--drivers/input/Kconfig4
-rw-r--r--drivers/input/joystick/Kconfig14
-rw-r--r--drivers/input/joystick/iforce/Kconfig4
-rw-r--r--drivers/input/joystick/walkera0701.c2
-rw-r--r--drivers/input/misc/Kconfig4
-rw-r--r--drivers/input/misc/rotary_encoder.c2
-rw-r--r--drivers/input/mouse/Kconfig6
-rw-r--r--drivers/input/mouse/alps.c2
-rw-r--r--drivers/input/serio/Kconfig4
-rw-r--r--drivers/input/touchscreen/wm97xx-core.c2
-rw-r--r--drivers/lightnvm/pblk-rb.c2
-rw-r--r--drivers/md/bcache/Kconfig2
-rw-r--r--drivers/md/bcache/btree.c2
-rw-r--r--drivers/md/bcache/extents.c2
-rw-r--r--drivers/media/dvb-core/dvb_ringbuffer.c2
-rw-r--r--drivers/media/dvb-frontends/Kconfig18
-rw-r--r--drivers/media/dvb-frontends/dib3000.h2
-rw-r--r--drivers/media/dvb-frontends/dib3000mb.c2
-rw-r--r--drivers/media/dvb-frontends/eds1547.h2
-rw-r--r--drivers/media/dvb-frontends/nxt200x.c4
-rw-r--r--drivers/media/dvb-frontends/or51211.c2
-rw-r--r--drivers/media/dvb-frontends/sp8870.c2
-rw-r--r--drivers/media/dvb-frontends/sp887x.c2
-rw-r--r--drivers/media/dvb-frontends/tda1004x.c4
-rw-r--r--drivers/media/dvb-frontends/tda10071.c2
-rw-r--r--drivers/media/dvb-frontends/z0194a.h2
-rw-r--r--drivers/media/i2c/max2175.c6
-rw-r--r--drivers/media/pci/bt8xx/Kconfig2
-rw-r--r--drivers/media/pci/cx18/cx18-dvb.c2
-rw-r--r--drivers/media/pci/cx18/cx18-streams.c4
-rw-r--r--drivers/media/pci/cx23885/cx23885-cards.c2
-rw-r--r--drivers/media/pci/meye/Kconfig2
-rw-r--r--drivers/media/pci/ttpci/Kconfig2
-rw-r--r--drivers/media/platform/pxa_camera.c4
-rw-r--r--drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c2
-rw-r--r--drivers/media/radio/Kconfig12
-rw-r--r--drivers/media/radio/si470x/Kconfig2
-rw-r--r--drivers/media/radio/wl128x/Kconfig2
-rw-r--r--drivers/media/usb/dvb-usb-v2/Kconfig2
-rw-r--r--drivers/media/usb/dvb-usb-v2/dvb_usb_core.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/gl861.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/lmedm04.c4
-rw-r--r--drivers/media/usb/dvb-usb-v2/lmedm04.h2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf.c2
-rw-r--r--drivers/media/usb/dvb-usb-v2/mxl111sf.h2
-rw-r--r--drivers/media/usb/dvb-usb/Kconfig2
-rw-r--r--drivers/media/usb/dvb-usb/a800.c2
-rw-r--r--drivers/media/usb/dvb-usb/af9005-fe.c2
-rw-r--r--drivers/media/usb/dvb-usb/af9005-remote.c2
-rw-r--r--drivers/media/usb/dvb-usb/af9005.c2
-rw-r--r--drivers/media/usb/dvb-usb/af9005.h2
-rw-r--r--drivers/media/usb/dvb-usb/az6027.c2
-rw-r--r--drivers/media/usb/dvb-usb/cxusb.c2
-rw-r--r--drivers/media/usb/dvb-usb/dibusb-common.c2
-rw-r--r--drivers/media/usb/dvb-usb/dibusb-mb.c2
-rw-r--r--drivers/media/usb/dvb-usb/dibusb-mc-common.c2
-rw-r--r--drivers/media/usb/dvb-usb/dibusb-mc.c2
-rw-r--r--drivers/media/usb/dvb-usb/dibusb.h2
-rw-r--r--drivers/media/usb/dvb-usb/digitv.c2
-rw-r--r--drivers/media/usb/dvb-usb/dtt200u-fe.c2
-rw-r--r--drivers/media/usb/dvb-usb/dtt200u.c2
-rw-r--r--drivers/media/usb/dvb-usb/dtt200u.h2
-rw-r--r--drivers/media/usb/dvb-usb/dvb-usb-firmware.c2
-rw-r--r--drivers/media/usb/dvb-usb/dvb-usb-init.c2
-rw-r--r--drivers/media/usb/dvb-usb/dw2102.c6
-rw-r--r--drivers/media/usb/dvb-usb/friio-fe.c2
-rw-r--r--drivers/media/usb/dvb-usb/friio.c2
-rw-r--r--drivers/media/usb/dvb-usb/friio.h2
-rw-r--r--drivers/media/usb/dvb-usb/gp8psk.c4
-rw-r--r--drivers/media/usb/dvb-usb/gp8psk.h2
-rw-r--r--drivers/media/usb/dvb-usb/m920x.c2
-rw-r--r--drivers/media/usb/dvb-usb/nova-t-usb2.c2
-rw-r--r--drivers/media/usb/dvb-usb/opera1.c4
-rw-r--r--drivers/media/usb/dvb-usb/ttusb2.c2
-rw-r--r--drivers/media/usb/dvb-usb/ttusb2.h2
-rw-r--r--drivers/media/usb/dvb-usb/umt-010.c2
-rw-r--r--drivers/media/usb/dvb-usb/vp702x-fe.c2
-rw-r--r--drivers/media/usb/dvb-usb/vp702x.c2
-rw-r--r--drivers/media/usb/dvb-usb/vp7045-fe.c2
-rw-r--r--drivers/media/usb/dvb-usb/vp7045.c2
-rw-r--r--drivers/media/usb/dvb-usb/vp7045.h2
-rw-r--r--drivers/media/usb/gspca/m5602/Kconfig2
-rw-r--r--drivers/media/usb/ttusb-dec/Kconfig6
-rw-r--r--drivers/media/usb/zr364xx/Kconfig2
-rw-r--r--drivers/net/ethernet/intel/Kconfig8
-rw-r--r--drivers/parport/Kconfig6
-rw-r--r--drivers/platform/x86/Kconfig2
-rw-r--r--drivers/sbus/char/oradax.c2
-rw-r--r--drivers/soundwire/stream.c8
-rw-r--r--drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt2
-rw-r--r--drivers/staging/media/bcm2048/TODO2
-rw-r--r--drivers/staging/media/zoran/Kconfig2
-rw-r--r--drivers/video/fbdev/skeletonfb.c8
-rw-r--r--fs/Kconfig.binfmt2
-rw-r--r--fs/befs/ChangeLog2
-rw-r--r--fs/binfmt_misc.c2
-rw-r--r--fs/orangefs/orangefs-sysfs.c2
-rw-r--r--include/keys/asymmetric-subtype.h2
-rw-r--r--include/keys/asymmetric-type.h2
-rw-r--r--include/linux/assoc_array.h2
-rw-r--r--include/linux/assoc_array_priv.h2
-rw-r--r--include/linux/circ_buf.h2
-rw-r--r--include/linux/ftrace.h2
-rw-r--r--include/linux/platform_data/sc18is602.h2
-rw-r--r--include/linux/rculist_nulls.h2
-rw-r--r--include/linux/tracepoint.h2
-rw-r--r--include/uapi/linux/prctl.h2
-rw-r--r--include/xen/interface/io/kbdif.h2
-rw-r--r--kernel/cgroup/cpuset.c2
-rw-r--r--kernel/power/main.c5
-rw-r--r--kernel/trace/Kconfig16
-rw-r--r--lib/Kconfig2
-rwxr-xr-xscripts/documentation-file-ref-check56
-rw-r--r--security/device_cgroup.c2
-rw-r--r--security/selinux/hooks.c2
-rw-r--r--sound/core/Kconfig4
-rw-r--r--sound/drivers/Kconfig4
-rw-r--r--sound/pci/Kconfig10
-rw-r--r--tools/include/uapi/linux/prctl.h2
-rw-r--r--tools/lib/api/fs/fs.c2
-rw-r--r--tools/perf/util/bpf-prologue.c2
-rw-r--r--tools/power/pm-graph/config/custom-timeline-functions.cfg4
206 files changed, 372 insertions, 339 deletions
diff --git a/Documentation/ABI/obsolete/sysfs-gpio b/Documentation/ABI/obsolete/sysfs-gpio
index 32513dc2eec9..40d41ea1a3f5 100644
--- a/Documentation/ABI/obsolete/sysfs-gpio
+++ b/Documentation/ABI/obsolete/sysfs-gpio
@@ -11,7 +11,7 @@ Description:
Kernel code may export it for complete or partial access.
GPIOs are identified as they are inside the kernel, using integers in
- the range 0..INT_MAX. See Documentation/gpio/gpio.txt for more information.
+ the range 0..INT_MAX. See Documentation/gpio for more information.
/sys/class/gpio
/export ... asks the kernel to export a GPIO to userspace
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index bd4975e132d3..9c5e7732d249 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -238,9 +238,6 @@ Description: Discover and change clock speed of CPUs
See files in Documentation/cpu-freq/ for more information.
- In particular, read Documentation/cpu-freq/user-guide.txt
- to learn how to control the knobs.
-
What: /sys/devices/system/cpu/cpu#/cpufreq/freqdomain_cpus
Date: June 2013
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 638342d0a095..efc7aa7a0670 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -256,7 +256,7 @@
(may crash computer or cause data corruption)
ALSA [HW,ALSA]
- See Documentation/sound/alsa/alsa-parameters.txt
+ See Documentation/sound/alsa-configuration.rst
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
@@ -2926,9 +2926,6 @@
This will also cause panics on machine check exceptions.
Useful together with panic=30 to trigger a reboot.
- OSS [HW,OSS]
- See Documentation/sound/oss/oss-parameters.txt
-
page_owner= [KNL] Boot-time page_owner enabling option.
Storage of the information about who allocated
each page is disabled in default. With this switch,
@@ -4335,7 +4332,7 @@
[FTRACE] Set and start specified trace events in order
to facilitate early boot debugging. The event-list is a
comma separated list of trace events to enable. See
- also Documentation/trace/events.txt
+ also Documentation/trace/events.rst
trace_options=[option-list]
[FTRACE] Enable or disable tracer options at boot.
@@ -4350,7 +4347,7 @@
trace_options=stacktrace
- See also Documentation/trace/ftrace.txt "trace options"
+ See also Documentation/trace/ftrace.rst "trace options"
section.
tp_printk[FTRACE]
diff --git a/Documentation/crypto/crypto_engine.rst b/Documentation/crypto/crypto_engine.rst
index 8272ac92a14f..1d56221dfe35 100644
--- a/Documentation/crypto/crypto_engine.rst
+++ b/Documentation/crypto/crypto_engine.rst
@@ -8,11 +8,13 @@ The crypto engine API (CE), is a crypto queue manager.
Requirement
-----------
-You have to put at start of your tfm_ctx the struct crypto_engine_ctx
-struct your_tfm_ctx {
+You have to put at start of your tfm_ctx the struct crypto_engine_ctx::
+
+ struct your_tfm_ctx {
struct crypto_engine_ctx enginectx;
...
-};
+ };
+
Why: Since CE manage only crypto_async_request, it cannot know the underlying
request_type and so have access only on the TFM.
So using container_of for accessing __ctx is impossible.
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
index 7364953d0d0b..45ac19bfa0a9 100644
--- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
Each subnode should use the binding described in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
-[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
-[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
Required properties:
diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt
index 03f8fdee62a7..56d603c1f716 100644
--- a/Documentation/devicetree/bindings/clock/ti/gate.txt
+++ b/Documentation/devicetree/bindings/clock/ti/gate.txt
@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
that is used.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
Required properties:
diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt
index 3111a409fea6..3f4704040140 100644
--- a/Documentation/devicetree/bindings/clock/ti/interface.txt
+++ b/Documentation/devicetree/bindings/clock/ti/interface.txt
@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
clock) and hardware autoidle enable / disable.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/gate-clock.txt
+[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
Required properties:
- compatible : shall be one of:
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index d36f07e0a2bb..0551c78619de 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -8,7 +8,7 @@ Required properties:
"intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
source (usually MAINPLL) when the original CPU PLL is under
transition and not stable yet.
- Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+ Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
generic clock consumer properties.
- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
for detail.
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index d6d2833482c9..fc2bcbe26b1e 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -12,7 +12,7 @@ Required properties:
- clocks: Phandles for clock specified in "clock-names" property
- clock-names : The name of clock used by the DFI, must be
"pclk_ddr_mon";
-- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
- center-supply: DMC supply node.
- status: Marks the node enabled/disabled.
diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
index 1a4eaca40d94..f5a02f61dd36 100644
--- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt
@@ -30,7 +30,7 @@ Optional properties:
- nxp,calib-gpios: calibration GPIO, which must correspond with the
gpio used for the TDA998x interrupt pin.
-[1] Documentation/sound/alsa/soc/DAI.txt
+[1] Documentation/sound/soc/dai.rst
[2] include/dt-bindings/display/tda998x.h
Example:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
index 039219df05c5..18a2cde2e5f3 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -34,7 +34,7 @@ Optional properties:
- mali-supply : Phandle to regulator for the Mali device. Refer to
Documentation/devicetree/bindings/regulator/regulator.txt for details.
-- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index c1f65d1dac1d..63cd91176a68 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -44,7 +44,7 @@ Optional properties:
- memory-region:
Memory region to allocate from, as defined in
- Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+ Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
- mali-supply:
Phandle to regulator for the Mali device, as defined in
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
index f2c30c8b725d..9afffbdf6e28 100644
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
+++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
@@ -12,7 +12,7 @@ Additional documentation for F11 can be found at:
http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
Optional Touch Properties:
-Description in Documentation/devicetree/bindings/input/touch
+Description in Documentation/devicetree/bindings/input/touchscreen
- touchscreen-inverted-x
- touchscreen-inverted-y
- touchscreen-swapped-x-y
diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt
index f99fe5cdeaec..a644408b33b8 100644
--- a/Documentation/devicetree/bindings/input/rotary-encoder.txt
+++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt
@@ -28,7 +28,7 @@ Deprecated properties:
This property is deprecated. Instead, a 'steps-per-period ' value should
be used, such as "rotary-encoder,steps-per-period = <2>".
-See Documentation/input/rotary-encoder.txt for more information.
+See Documentation/input/devices/rotary-encoder.rst for more information.
Example:
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index c7888d6f6408..880d4d70c9fd 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
@@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num)
must be defined for each tsin child node.
- pinctrl-0 : phandle referencing pin configuration for this tsin configuration
-See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Required properties (tsin (child) node):
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
index 0b2a6099aa20..5297b2210704 100644
--- a/Documentation/devicetree/bindings/mfd/as3722.txt
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -46,7 +46,7 @@ is required:
Following properties are require if pin control setting is required
at boot.
- pinctrl-names: A pinctrl state named "default" be defined, using the
- bindings in pinctrl/pinctrl-binding.txt.
+ bindings in pinctrl/pinctrl-bindings.txt.
- pinctrl[0...n]: Properties to contain the phandle that refer to
different nodes of pin control settings. These nodes represents
the pin control setting of state 0 to state n. Each of these
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index d1df77f4d655..0ebd08af777d 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
This document describes the binding for MFD device and its sub module.
diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
index dd2c06540485..daa091c2e67b 100644
--- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
+++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt
@@ -8,8 +8,8 @@ Required properties:
- reg: The PRCM registers range
The prcm node may contain several subdevices definitions:
- - see Documentation/devicetree/clk/sunxi.txt for clock devices
- - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
+ - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices
+ - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
controller devices
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index a58c173b7ab9..0419a63f73a0 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
rest of the gpios (depending on the bus-width property) are the data lines in
no particular order. The format of the gpio specifier depends on the gpio
controller.
-(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
+(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
Example:
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
index 3149297b3933..f064528effed 100644
--- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
@@ -12,7 +12,7 @@ Required properties:
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the SDHCI controller.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Example:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 6b3d40ca395e..ccf82b4ee838 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
@@ -20,7 +20,7 @@ Required properties:
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- reg: This must provide the host controller base address and it can also
contain the FlashSS Top register for TX/RX delay used by the driver
diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt
index fd23904ac68e..a700943218ca 100644
--- a/Documentation/devicetree/bindings/net/dsa/ksz.txt
+++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt
@@ -6,7 +6,7 @@ Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "microchip,ksz9477"
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index a9bc27b93ee3..aa3527f71fdc 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
"cpu".
-See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
+See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required, optional properties and how the integrated switch subnodes must
be specified.
diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
index d5e22fc67d66..0df79d9e07ec 100644
--- a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
+++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt
@@ -18,7 +18,7 @@ Optional properties:
Data cells:
Data cells are child nodes of eerpom node, bindings for which are
-documented in Documentation/bindings/nvmem/nvmem.txt
+documented in Documentation/devicetree/bindings/nvmem/nvmem.txt
Example:
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 7bf9df047a1e..0dcb87d6554f 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -3,7 +3,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description
HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
It shares common functions with the PCIe DesignWare core driver and inherits
common properties defined in
-Documentation/devicetree/bindings/pci/designware-pci.txt.
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
Additional properties are described here:
diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
index 6e217c63123d..6bbe43818ad5 100644
--- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt
@@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description
Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
It shares common functions with the PCIe DesignWare core driver and
inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pci.txt.
+Documentation/devicetree/bindings/pci/designware-pcie.txt.
Additional properties are described here:
diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt
index 7e05487544ed..3d4a209b0fd0 100644
--- a/Documentation/devicetree/bindings/pci/pci-keystone.txt
+++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt
@@ -3,9 +3,9 @@ TI Keystone PCIe interface
Keystone PCI host Controller is based on the Synopsys DesignWare PCI
hardware version 3.65. It shares common functions with the PCIe DesignWare
core driver and inherits common properties defined in
-Documentation/devicetree/bindings/pci/designware-pci.txt
+Documentation/devicetree/bindings/pci/designware-pcie.txt
-Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt
+Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt
for the details of DesignWare DT bindings. Additional properties are
described here as well as properties that are not applicable.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
index ad4fce3552bb..511fc234558b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
@@ -11,9 +11,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index a677145ae6d1..625a22e2f211 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -101,9 +101,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
index eee3dc260934..cbcbd31e3ce8 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
@@ -10,9 +10,9 @@ Optional Pinmux properties:
--------------------------
Following properties are required if default setting of pins are required
at boot.
-- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>.
- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
- <pinctrl-binding.txt>.
+ <pinctrl-bindings.txt>.
The pin configurations are defined as child of the pinctrl states node. Each
sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
index b31d6bbeee16..726ec2875223 100644
--- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
+++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt
@@ -14,7 +14,7 @@ Required properties:
datasheet
- interrupts: Should contain one interrupt specifier for the GPC interrupt
- clocks: Must contain an entry for each entry in clock-names.
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- ipg
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
index 0ba1bcc7f33a..f181e46d8e07 100644
--- a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
+++ b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt
@@ -13,4 +13,4 @@ Required Properties:
};
For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
+Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
index ef5328371122..56636f927203 100644
--- a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
+++ b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt
@@ -13,4 +13,4 @@ ab8500_chargalg {
};
For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
+Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
index 6bdbb08ea9e0..24ada03e07b4 100644
--- a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
+++ b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt
@@ -22,4 +22,4 @@ Required Properties:
};
For information on battery specific node, Ref:
-Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
+Documentation/devicetree/bindings/power/supply/ab8500/fg.txt
diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
index 5d254ab13ebf..cfd74659fbed 100644
--- a/Documentation/devicetree/bindings/power/wakeup-source.txt
+++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
@@ -22,7 +22,7 @@ List of legacy properties and respective binding document
3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
Documentation/devicetree/bindings/mfd/tc3589x.txt
- Documentation/devicetree/bindings/input/ads7846.txt
+ Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
index 7a34345d0ca3..c8dd440e9747 100644
--- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -8,7 +8,7 @@ Required properties:
See: Documentation/devicetree/bindings/clock/clock-bindings.txt
- pinctrl-names: A pinctrl state names "default" must be defined.
- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
- See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
Optional properties:
- cts-gpios: CTS pin for UART
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
index 4bda52042402..58c341300552 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
@@ -18,7 +18,7 @@ Required properties:
See Documentation/devicetree/bindings/dma/stm32-dma.txt.
- dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
- pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
Optional properties:
- resets: Reference to a reset controller asserting the reset controller
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
index f301cdf0b7e6..3a3fc506e43a 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
@@ -37,7 +37,7 @@ SAI subnodes required properties:
"tx": if sai sub-block is configured as playback DAI
"rx": if sai sub-block is configured as capture DAI
- pinctrl-names: should contain only value "default"
- - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt
+ - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
SAI subnodes Optional properties:
- st,sync: specify synchronization mode.
diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
index fe54959ec957..1bdc4709e474 100644
--- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
@@ -9,7 +9,7 @@ Required properties:
- clocks : Must contain an entry for each name in clock-names
See ../clk/*
- pinctrl-names : Uses "default", can use "sleep" if provided
- See ../pinctrl/pinctrl-binding.txt
+ See ../pinctrl/pinctrl-bindings.txt
Optional properties:
- cs-gpios : List of GPIO chip selects
diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
index 50a31536e975..252a05c5d976 100644
--- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
+Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
Example device nodes:
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index c71a50d85b50..aa03f389d41d 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -57,7 +57,7 @@ device that displays digits), an additional index argument can be specified::
enum gpiod_flags flags)
For a more detailed description of the con_id parameter in the DeviceTree case
-see Documentation/gpio/board.txt
+see Documentation/driver-api/gpio/board.rst
The flags parameter is used to optionally specify a direction and initial value
for the GPIO. Values can be:
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index cfd31d94c872..72d16f08e431 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -53,7 +53,7 @@ bus supply voltage.
The shunt value in micro-ohms can be set via platform data or device tree at
compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
-refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
if the device tree is used.
Additionally ina226 supports update_interval attribute as described in
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 22208bf2386d..cb3b0de83fc6 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -724,8 +724,8 @@ migrate your tool to one of the following options:
See following documents:
- - Documentation/trace/kprobetrace.txt
- - Documentation/trace/events.txt
+ - Documentation/trace/kprobetrace.rst
+ - Documentation/trace/events.rst
- tools/perf/Documentation/perf-probe.txt
diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
index a19db3458b56..22b271de0304 100644
--- a/Documentation/maintainer/pull-requests.rst
+++ b/Documentation/maintainer/pull-requests.rst
@@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
that will create a signed tag called ``char-misc-4.15-rc1`` based on the
last commit in the ``char-misc-next`` branch, and sign it with your gpg key
-(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
+(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
Linus will only accept pull requests based on a signed tag. Other
maintainers may differ.
diff --git a/Documentation/networking/can.rst b/Documentation/networking/can.rst
index d23c51abf8c6..2fd0b51a8c52 100644
--- a/Documentation/networking/can.rst
+++ b/Documentation/networking/can.rst
@@ -164,7 +164,7 @@ The Linux network devices (by default) just can handle the
transmission and reception of media dependent frames. Due to the
arbitration on the CAN bus the transmission of a low prio CAN-ID
may be delayed by the reception of a high prio CAN frame. To
-reflect the correct [*]_ traffic on the node the loopback of the sent
+reflect the correct [#f1]_ traffic on the node the loopback of the sent
data has to be performed right after a successful transmission. If
the CAN network interface is not capable of performing the loopback for
some reason the SocketCAN core can do this task as a fallback solution.
@@ -175,7 +175,7 @@ networking behaviour for CAN applications. Due to some requests from
the RT-SocketCAN group the loopback optionally may be disabled for each
separate socket. See sockopts from the CAN RAW sockets in :ref:`socketcan-raw-sockets`.
-.. [*] you really like to have this when you're running analyser
+.. [#f1] you really like to have this when you're running analyser
tools like 'candump' or 'cansniffer' on the (same) node.
diff --git a/Documentation/sphinx/rstFlatTable.py b/Documentation/sphinx/rstFlatTable.py
index 25feb0d35e7a..2019a55f6b18 100755
--- a/Documentation/sphinx/rstFlatTable.py
+++ b/Documentation/sphinx/rstFlatTable.py
@@ -53,8 +53,6 @@ from docutils.utils import SystemMessagePropagation
# common globals
# ==============================================================================
-# The version numbering follows numbering of the specification
-# (Documentation/books/kernel-doc-HOWTO).
__version__ = '1.0'
PY3 = sys.version_info[0] == 3
diff --git a/Documentation/trace/coresight.txt b/Documentation/trace/coresight.txt
index 1d74ad0202b6..efbc832146e7 100644
--- a/Documentation/trace/coresight.txt
+++ b/Documentation/trace/coresight.txt
@@ -426,5 +426,5 @@ root@genericarmv8:~#
Details on how to use the generic STM API can be found here [2].
[1]. Documentation/ABI/testing/sysfs-bus-coresight-devices-stm
-[2]. Documentation/trace/stm.txt
+[2]. Documentation/trace/stm.rst
[3]. https://github.com/Linaro/perf-opencsd
diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst
index 1afae55dc55c..696dc69b8158 100644
--- a/Documentation/trace/events.rst
+++ b/Documentation/trace/events.rst
@@ -8,7 +8,7 @@ Event Tracing
1. Introduction
===============
-Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+Tracepoints (see Documentation/trace/tracepoints.rst) can be used
without creating custom kernel modules to register probe functions
using the event tracing infrastructure.
diff --git a/Documentation/trace/ftrace-uses.rst b/Documentation/trace/ftrace-uses.rst
index 00283b6dd101..1fbc69894eed 100644
--- a/Documentation/trace/ftrace-uses.rst
+++ b/Documentation/trace/ftrace-uses.rst
@@ -199,7 +199,7 @@ If @buf is NULL and reset is set, all functions will be enabled for tracing.
The @buf can also be a glob expression to enable all functions that
match a specific pattern.
-See Filter Commands in :file:`Documentation/trace/ftrace.txt`.
+See Filter Commands in :file:`Documentation/trace/ftrace.rst`.
To just trace the schedule function:
diff --git a/Documentation/trace/histogram.txt b/Documentation/trace/histogram.txt
index b13771cb12c1..e73bcf9cb5f3 100644
--- a/Documentation/trace/histogram.txt
+++ b/Documentation/trace/histogram.txt
@@ -7,7 +7,7 @@
Histogram triggers are special event triggers that can be used to
aggregate trace event data into histograms. For information on
- trace events and event triggers, see Documentation/trace/events.txt.
+ trace events and event triggers, see Documentation/trace/events.rst.
2. Histogram Trigger Command
diff --git a/Documentation/trace/intel_th.rst b/Documentation/trace/intel_th.rst
index 990f13265178..19e2d633f3c7 100644
--- a/Documentation/trace/intel_th.rst
+++ b/Documentation/trace/intel_th.rst
@@ -38,7 +38,7 @@ description is at Documentation/ABI/testing/sysfs-bus-intel_th-devices-gth.
STH registers an stm class device, through which it provides interface
to userspace and kernelspace software trace sources. See
-Documentation/trace/stm.txt for more information on that.
+Documentation/trace/stm.rst for more information on that.
MSU can be configured to collect trace data into a system memory
buffer, which can later on be read from its device nodes via read() or
diff --git a/Documentation/trace/tracepoint-analysis.rst b/Documentation/trace/tracepoint-analysis.rst
index a4d3ff2e5efb..716326b9f152 100644
--- a/Documentation/trace/tracepoint-analysis.rst
+++ b/Documentation/trace/tracepoint-analysis.rst
@@ -6,7 +6,7 @@ Notes on Analysing Behaviour Using Events and Tracepoints
1. Introduction
===============
-Tracepoints (see Documentation/trace/tracepoints.txt) can be used without
+Tracepoints (see Documentation/trace/tracepoints.rst) can be used without
creating custom kernel modules to register probe functions using the event
tracing infrastructure.
@@ -55,7 +55,7 @@ simple case of::
3.1 System-Wide Event Enabling
------------------------------
-See Documentation/trace/events.txt for a proper description on how events
+See Documentation/trace/events.rst for a proper description on how events
can be enabled system-wide. A short example of enabling all events related
to page allocation would look something like::
@@ -112,7 +112,7 @@ at that point.
3.4 Local Event Enabling
------------------------
-Documentation/trace/ftrace.txt describes how to enable events on a per-thread
+Documentation/trace/ftrace.rst describes how to enable events on a per-thread
basis using set_ftrace_pid.
3.5 Local Event Enablement with PCL
@@ -137,7 +137,7 @@ basis using PCL such as follows.
4. Event Filtering
==================
-Documentation/trace/ftrace.txt covers in-depth how to filter events in
+Documentation/trace/ftrace.rst covers in-depth how to filter events in
ftrace. Obviously using grep and awk of trace_pipe is an option as well
as any script reading trace_pipe.
diff --git a/Documentation/translations/ja_JP/howto.rst b/Documentation/translations/ja_JP/howto.rst
index 8d7ed0cbbf5f..f3116381c26b 100644
--- a/Documentation/translations/ja_JP/howto.rst
+++ b/Documentation/translations/ja_JP/howto.rst
@@ -1,5 +1,5 @@
NOTE:
-This is a version of Documentation/HOWTO translated into Japanese.
+This is a version of Documentation/process/howto.rst translated into Japanese.
This document is maintained by Tsugikazu Shibata <tshibata@ab.jp.nec.com>
If you find any difference between this document and the original file or
a problem with the translation, please contact the maintainer of this file.
@@ -109,7 +109,7 @@ linux-api@vger.kernel.org に送ることを勧めます。
ています。 カーネルに関して初めての人はここからスタートすると良い
でしょう。
- :ref:`Documentation/Process/changes.rst <changes>`
+ :ref:`Documentation/process/changes.rst <changes>`
このファイルはカーネルをうまく生成(訳注 build )し、走らせるのに最
小限のレベルで必要な数々のソフトウェアパッケージの一覧を示してい
ます。
diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst
index 624654bdcd8a..a8197e072599 100644
--- a/Documentation/translations/ko_KR/howto.rst
+++ b/Documentation/translations/ko_KR/howto.rst
@@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
때문이다.
- :ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
+ :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
무엇을 해야 하는지를 설명한다.
diff --git a/Documentation/translations/zh_CN/SubmittingDrivers b/Documentation/translations/zh_CN/SubmittingDrivers
index 929385e4b194..15e73562f710 100644
--- a/Documentation/translations/zh_CN/SubmittingDrivers
+++ b/Documentation/translations/zh_CN/SubmittingDrivers
@@ -107,7 +107,7 @@ Linux 2.6:
程序测试的指导,请参阅
Documentation/power/drivers-testing.txt。有关驱动程序电
源管理问题相对全面的概述,请参阅
- Documentation/power/admin-guide/devices.rst。
+ Documentation/driver-api/pm/devices.rst。
管理: 如果一个驱动程序的作者还在进行有效的维护,那么通常除了那
些明显正确且不需要任何检查的补丁以外,其他所有的补丁都会
diff --git a/Documentation/translations/zh_CN/gpio.txt b/Documentation/translations/zh_CN/gpio.txt
index 4f8bf30a41dc..4cb1ba8b8fed 100644
--- a/Documentation/translations/zh_CN/gpio.txt
+++ b/Documentation/translations/zh_CN/gpio.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/gpio.txt
+Chinese translated version of Documentation/gpio
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -10,7 +10,7 @@ Maintainer: Grant Likely <grant.likely@secretlab.ca>
Linus Walleij <linus.walleij@linaro.org>
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
---------------------------------------------------------------------
-Documentation/gpio.txt 的中文翻译
+Documentation/gpio 的中文翻译
如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/io_ordering.txt b/Documentation/translations/zh_CN/io_ordering.txt
index e592daf4e014..1f8127bdd415 100644
--- a/Documentation/translations/zh_CN/io_ordering.txt
+++ b/Documentation/translations/zh_CN/io_ordering.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/io_orderings.txt
+Chinese translated version of Documentation/io_ordering.txt
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
diff --git a/Documentation/translations/zh_CN/magic-number.txt b/Documentation/translations/zh_CN/magic-number.txt
index e9db693c0a23..7159cec04090 100644
--- a/Documentation/translations/zh_CN/magic-number.txt
+++ b/Documentation/translations/zh_CN/magic-number.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/magic-number.txt
+Chinese translated version of Documentation/process/magic-number.rst
If you have any comment or update to the content, please post to LKML directly.
However, if you have problem communicating in English you can also ask the
@@ -7,7 +7,7 @@ translation is outdated or there is problem with translation.
Chinese maintainer: Jia Wei Wei <harryxiyou@gmail.com>
---------------------------------------------------------------------
-Documentation/magic-number.txt的中文翻译
+Documentation/process/magic-number.rst的中文翻译
如果想评论或更新本文的内容,请直接发信到LKML。如果你使用英文交流有困难的话,也可
以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题,请联系中文版维护者。
diff --git a/Documentation/translations/zh_CN/video4linux/omap3isp.txt b/Documentation/translations/zh_CN/video4linux/omap3isp.txt
index 67ffbf352ae0..e9f29375aa95 100644
--- a/Documentation/translations/zh_CN/video4linux/omap3isp.txt
+++ b/Documentation/translations/zh_CN/video4linux/omap3isp.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/video4linux/omap3isp.txt
+Chinese translated version of Documentation/media/v4l-drivers/omap3isp.rst
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -11,7 +11,7 @@ Maintainer: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
David Cohen <dacohen@gmail.com>
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
---------------------------------------------------------------------
-Documentation/video4linux/omap3isp.txt 的中文翻译
+Documentation/media/v4l-drivers/omap3isp.rst 的中文翻译
如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
diff --git a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
index c77c0f060864..66c7c568bd86 100644
--- a/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
+++ b/Documentation/translations/zh_CN/video4linux/v4l2-framework.txt
@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/video4linux/v4l2-framework.txt
+Chinese translated version of Documentation/media/media_kapi.rst
If you have any comment or update to the content, please contact the
original document maintainer directly. However, if you have a problem
@@ -9,7 +9,7 @@ or if there is a problem with the translation.
Maintainer: Mauro Carvalho Chehab <mchehab@kernel.org>
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
---------------------------------------------------------------------
-Documentation/video4linux/v4l2-framework.txt 的中文翻译
+Documentation/media/media_kapi.rst 的中文翻译
如果想评论或更新本文的内容,请直接联系原文档的维护者。如果你使用英文
交流有困难的话,也可以向中文版维护者求助。如果本翻译更新不及时或者翻
@@ -777,7 +777,7 @@ v4l2 核心 API 提供了一个处理视频缓冲的标准方法(称为“videob
线性 DMA(videobuf-dma-contig)以及大多用于 USB 设备的用 vmalloc
分配的缓冲(videobuf-vmalloc)。
-请参阅 Documentation/video4linux/videobuf,以获得更多关于 videobuf
+请参阅 Documentation/media/kapi/v4l2-videobuf.rst,以获得更多关于 videobuf
层的使用信息。
v4l2_fh 结构体
diff --git a/MAINTAINERS b/MAINTAINERS
index 97b65e4eaaee..9d5eeff51b5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1732,7 +1732,8 @@ F: arch/arm/mach-npcm/
F: arch/arm/boot/dts/nuvoton-npcm*
F: include/dt-bindings/clock/nuvoton,npcm7xx-clks.h
F: drivers/*/*npcm*
-F: Documentation/*/*npcm*
+F: Documentation/devicetree/bindings/*/*npcm*
+F: Documentation/devicetree/bindings/*/*/*npcm*
ARM/NUVOTON W90X900 ARM ARCHITECTURE
M: Wan ZongShun <mcuos.com@gmail.com>
@@ -3079,7 +3080,7 @@ M: Clemens Ladisch <clemens@ladisch.de>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained
-F: Documentation/sound/alsa/Bt87x.txt
+F: Documentation/sound/cards/bt87x.rst
F: sound/pci/bt87x.c
BT8XXGPIO DRIVER
@@ -3375,7 +3376,7 @@ M: David Howells <dhowells@redhat.com>
M: David Woodhouse <dwmw2@infradead.org>
L: keyrings@vger.kernel.org
S: Maintained
-F: Documentation/module-signing.txt
+F: Documentation/admin-guide/module-signing.rst
F: certs/
F: scripts/sign-file.c
F: scripts/extract-cert.c
@@ -4513,7 +4514,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
M: David Lechner <david@lechnology.com>
S: Maintained
F: drivers/gpu/drm/tinydrm/ili9225.c
-F: Documentation/devicetree/bindings/display/ili9225.txt
+F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt
DRM DRIVER FOR INTEL I810 VIDEO CARDS
S: Orphan / Obsolete
@@ -4599,13 +4600,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
M: David Lechner <david@lechnology.com>
S: Maintained
F: drivers/gpu/drm/tinydrm/st7586.c
-F: Documentation/devicetree/bindings/display/st7586.txt
+F: Documentation/devicetree/bindings/display/sitronix,st7586.txt
DRM DRIVER FOR SITRONIX ST7735R PANELS
M: David Lechner <david@lechnology.com>
S: Maintained
F: drivers/gpu/drm/tinydrm/st7735r.c
-F: Documentation/devicetree/bindings/display/st7735r.txt
+F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt
DRM DRIVER FOR TDFX VIDEO CARDS
S: Orphan / Obsolete
@@ -4638,7 +4639,6 @@ F: drivers/gpu/drm/
F: drivers/gpu/vga/
F: Documentation/devicetree/bindings/display/
F: Documentation/devicetree/bindings/gpu/
-F: Documentation/devicetree/bindings/video/
F: Documentation/gpu/
F: include/drm/
F: include/uapi/drm/
@@ -4683,7 +4683,7 @@ M: Boris Brezillon <boris.brezillon@bootlin.com>
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/atmel-hlcdc/
-F: Documentation/devicetree/bindings/drm/atmel/
+F: Documentation/devicetree/bindings/display/atmel/
T: git git://anongit.freedesktop.org/drm/drm-misc
DRM DRIVERS FOR BRIDGE CHIPS
@@ -4714,7 +4714,7 @@ S: Supported
F: drivers/gpu/drm/fsl-dcu/
F: Documentation/devicetree/bindings/display/fsl,dcu.txt
F: Documentation/devicetree/bindings/display/fsl,tcon.txt
-F: Documentation/devicetree/bindings/display/panel/nec,nl4827hc19_05b.txt
+F: Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt
DRM DRIVERS FOR FREESCALE IMX
M: Philipp Zabel <p.zabel@pengutronix.de>
@@ -4824,7 +4824,7 @@ M: Eric Anholt <eric@anholt.net>
S: Supported
F: drivers/gpu/drm/v3d/
F: include/uapi/drm/v3d_drm.h
-F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
+F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
T: git git://anongit.freedesktop.org/drm/drm-misc
DRM DRIVERS FOR VC4
@@ -5735,7 +5735,7 @@ M: Madalin Bucur <madalin.bucur@nxp.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/freescale/fman
-F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
+F: Documentation/devicetree/bindings/net/fsl-fman.txt
FREESCALE QORIQ PTP CLOCK DRIVER
M: Yangbo Lu <yangbo.lu@nxp.com>
@@ -6501,7 +6501,7 @@ L: linux-mm@kvack.org
S: Maintained
F: mm/hmm*
F: include/linux/hmm*
-F: Documentation/vm/hmm.txt
+F: Documentation/vm/hmm.rst
HOST AP DRIVER
M: Jouni Malinen <j@w1.fi>
@@ -6966,7 +6966,7 @@ IIO MULTIPLEXER
M: Peter Rosin <peda@axentia.se>
L: linux-iio@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
F: drivers/iio/multiplexer/iio-mux.c
IIO SUBSYSTEM AND DRIVERS
@@ -7401,7 +7401,7 @@ F: drivers/platform/x86/intel-wmi-thunderbolt.c
INTEL(R) TRACE HUB
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
S: Supported
-F: Documentation/trace/intel_th.txt
+F: Documentation/trace/intel_th.rst
F: drivers/hwtracing/intel_th/
INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
@@ -7425,7 +7425,7 @@ M: Linus Walleij <linus.walleij@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/iio/gyro/mpu3050*
-F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
+F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
@@ -8700,7 +8700,7 @@ M: Guenter Roeck <linux@roeck-us.net>
L: linux-hwmon@vger.kernel.org
S: Maintained
F: Documentation/hwmon/max6697
-F: Documentation/devicetree/bindings/i2c/max6697.txt
+F: Documentation/devicetree/bindings/hwmon/max6697.txt
F: drivers/hwmon/max6697.c
F: include/linux/platform_data/max6697.h
@@ -9080,7 +9080,7 @@ M: Martin Donnelly <martin.donnelly@ge.com>
M: Martyn Welch <martyn.welch@collabora.co.uk>
S: Maintained
F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
-F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
+F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
MEGARAID SCSI/SAS DRIVERS
M: Kashyap Desai <kashyap.desai@broadcom.com>
@@ -9665,7 +9665,7 @@ F: include/uapi/linux/mmc/
MULTIPLEXER SUBSYSTEM
M: Peter Rosin <peda@axentia.se>
S: Maintained
-F: Documentation/ABI/testing/mux/sysfs-class-mux*
+F: Documentation/ABI/testing/sysfs-class-mux*
F: Documentation/devicetree/bindings/mux/
F: include/linux/dt-bindings/mux/
F: include/linux/mux/
@@ -9696,7 +9696,7 @@ MXSFB DRM DRIVER
M: Marek Vasut <marex@denx.de>
S: Supported
F: drivers/gpu/drm/mxsfb/
-F: Documentation/devicetree/bindings/display/mxsfb-drm.txt
+F: Documentation/devicetree/bindings/display/mxsfb.txt
MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
M: Chris Lee <christopher.lee@cspi.com>
@@ -10244,7 +10244,7 @@ F: arch/powerpc/include/asm/pnv-ocxl.h
F: drivers/misc/ocxl/
F: include/misc/ocxl*
F: include/uapi/misc/ocxl.h
-F: Documentation/accelerators/ocxl.txt
+F: Documentation/accelerators/ocxl.rst
OMAP AUDIO SUPPORT
M: Peter Ujfalusi <peter.ujfalusi@ti.com>
@@ -10726,7 +10726,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
M: Willy Tarreau <willy@haproxy.com>
M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
S: Odd Fixes
-F: Documentation/misc-devices/lcd-panel-cgram.txt
+F: Documentation/auxdisplay/lcd-panel-cgram.txt
F: drivers/misc/panel.c
PARALLEL PORT SUBSYSTEM
@@ -10883,7 +10883,7 @@ M: Will Deacon <will.deacon@arm.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: Documentation/devicetree/bindings/pci/controller-generic-pci.txt
+F: Documentation/devicetree/bindings/pci/host-generic-pci.txt
F: drivers/pci/controller/pci-host-common.c
F: drivers/pci/controller/pci-host-generic.c
@@ -11064,7 +11064,7 @@ M: Xiaowei Song <songxiaowei@hisilicon.com>
M: Binghui Wang <wangbinghui@hisilicon.com>
L: linux-pci@vger.kernel.org
S: Maintained
-F: Documentation/devicetree/bindings/pci/pcie-kirin.txt
+F: Documentation/devicetree/bindings/pci/kirin-pcie.txt
F: drivers/pci/controller/dwc/pcie-kirin.c
PCIE DRIVER FOR HISILICON STB
@@ -12455,7 +12455,7 @@ L: linux-crypto@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
F: drivers/crypto/exynos-rng.c
-F: Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt
+F: Documentation/devicetree/bindings/rng/samsung,exynos4-rng.txt
SAMSUNG EXYNOS TRUE RANDOM NUMBER GENERATOR (TRNG) DRIVER
M: Łukasz Stelmach <l.stelmach@samsung.com>
@@ -13297,7 +13297,7 @@ M: Vinod Koul <vkoul@kernel.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
S: Supported
-F: Documentation/sound/alsa/compress_offload.txt
+F: Documentation/sound/designs/compress-offload.rst
F: include/sound/compress_driver.h
F: include/uapi/sound/compress_*
F: sound/core/compress_offload.c
@@ -13318,7 +13318,7 @@ L: alsa-devel@alsa-project.org (moderated for non-subscribers)
W: http://alsa-project.org/main/index.php/ASoC
S: Supported
F: Documentation/devicetree/bindings/sound/
-F: Documentation/sound/alsa/soc/
+F: Documentation/sound/soc/
F: sound/soc/
F: include/sound/soc*
@@ -13577,7 +13577,7 @@ F: drivers/*/stm32-*timer*
F: drivers/pwm/pwm-stm32*
F: include/linux/*/stm32-*tim*
F: Documentation/ABI/testing/*timer-stm32
-F: Documentation/devicetree/bindings/*/stm32-*timer
+F: Documentation/devicetree/bindings/*/stm32-*timer*
F: Documentation/devicetree/bindings/pwm/pwm-stm32*
STMMAC ETHERNET DRIVER
@@ -13800,7 +13800,7 @@ SYSTEM TRACE MODULE CLASS
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git
-F: Documentation/trace/stm.txt
+F: Documentation/trace/stm.rst
F: drivers/hwtracing/stm/
F: include/linux/stm.h
F: include/uapi/linux/stm.h
@@ -14477,7 +14477,7 @@ M: Steven Rostedt <rostedt@goodmis.org>
M: Ingo Molnar <mingo@redhat.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Maintained
-F: Documentation/trace/ftrace.txt
+F: Documentation/trace/ftrace.rst
F: arch/*/*/*/ftrace.h
F: arch/*/kernel/ftrace.c
F: include/*/ftrace.h
@@ -14946,7 +14946,7 @@ M: Heikki Krogerus <heikki.krogerus@linux.intel.com>
L: linux-usb@vger.kernel.org
S: Maintained
F: Documentation/ABI/testing/sysfs-class-typec
-F: Documentation/usb/typec.rst
+F: Documentation/driver-api/usb/typec.rst
F: drivers/usb/typec/
F: include/linux/usb/typec.h
@@ -15775,7 +15775,7 @@ YEALINK PHONE DRIVER
M: Henk Vergonet <Henk.Vergonet@gmail.com>
L: usbb2k-api-dev@nongnu.org
S: Maintained
-F: Documentation/input/yealink.rst
+F: Documentation/input/devices/yealink.rst
F: drivers/input/misc/yealink.*
Z8530 DRIVER FOR AX.25
diff --git a/arch/Kconfig b/arch/Kconfig
index 47b235d43909..1aa59063f1fd 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -403,7 +403,7 @@ config SECCOMP_FILTER
in terms of Berkeley Packet Filter programs which implement
task-defined system call filtering polices.
- See Documentation/prctl/seccomp_filter.txt for details.
+ See Documentation/userspace-api/seccomp_filter.rst for details.
preferred-plugin-hostcc := $(if-success,[ $(gcc-version) -ge 40800 ],$(HOSTCXX),$(HOSTCC))
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 483d2858e367..54eeb8d00bc6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1302,7 +1302,7 @@ config SMP
will run faster if you say N here.
See also <file:Documentation/x86/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
<http://tldp.org/HOWTO/SMP-HOWTO.html>.
If you don't know what to do here, say N.
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 869080bedb89..ec1a5fd0d294 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -35,7 +35,7 @@
* Start addresses are inclusive and end addresses are exclusive;
* start addresses should be rounded down, end addresses up.
*
- * See Documentation/cachetlb.txt for more information.
+ * See Documentation/core-api/cachetlb.rst for more information.
* Please note that the implementation of these, and the required
* effects are cache-type (VIVT/VIPT/PIPT) specific.
*
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 0094c6653b06..d264a7274811 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -36,7 +36,7 @@
* Start addresses are inclusive and end addresses are exclusive; start
* addresses should be rounded down, end addresses up.
*
- * See Documentation/cachetlb.txt for more information. Please note that
+ * See Documentation/core-api/cachetlb.rst for more information. Please note that
* the implementation assumes non-aliasing VIPT D-cache and (aliasing)
* VIPT I-cache.
*
diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h
index ffea82a16d2c..b091de77b15b 100644
--- a/arch/microblaze/include/asm/cacheflush.h
+++ b/arch/microblaze/include/asm/cacheflush.h
@@ -19,7 +19,7 @@
#include <linux/mm.h>
#include <linux/io.h>
-/* Look at Documentation/cachetlb.txt */
+/* Look at Documentation/core-api/cachetlb.rst */
/*
* Cache handling functions.
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 4d8f64d48597..c480770fabcd 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -275,7 +275,7 @@ config SMP
machines, but will use only one CPU of a multiprocessor machine.
On a uniprocessor machine, the kernel will run faster if you say N.
- See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+ See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
available at <http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 4bedd1c97f29..dd4f3d3e644f 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -687,7 +687,7 @@ config SMP
People using multiprocessor machines who say Y here should also say
Y to "Enhanced Real Time Clock Support", below.
- See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+ See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
available at <http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 9a2b8877f174..0f535debf802 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -178,7 +178,7 @@ config SMP
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
Management" code will be disabled if you say Y here.
- See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
+ See also <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO
available at <http://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
diff --git a/arch/um/Kconfig.um b/arch/um/Kconfig.um
index 3e7f228b22e1..20da5a8ca949 100644
--- a/arch/um/Kconfig.um
+++ b/arch/um/Kconfig.um
@@ -80,7 +80,7 @@ config MAGIC_SYSRQ
On UML, this is accomplished by sending a "sysrq" command with
mconsole, followed by the letter for the requested command.
- The keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
+ The keys are documented in <file:Documentation/admin-guide/sysrq.rst>. Don't say Y
unless you really know what this hack does.
config KERNEL_STACK_ORDER
diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h
index 1d9132b66039..1c8b9f13a9e1 100644
--- a/arch/unicore32/include/asm/cacheflush.h
+++ b/arch/unicore32/include/asm/cacheflush.h
@@ -33,7 +33,7 @@
* Start addresses are inclusive and end addresses are exclusive;
* start addresses should be rounded down, end addresses up.
*
- * See Documentation/cachetlb.txt for more information.
+ * See Documentation/core-api/cachetlb.rst for more information.
* Please note that the implementation of these, and the required
* effects are cache-type (VIVT/VIPT/PIPT) specific.
*
diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c
index 7782cdbcd67d..82ed001e8909 100644
--- a/arch/x86/entry/vsyscall/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
@@ -201,7 +201,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
/*
* Handle seccomp. regs->ip must be the original value.
- * See seccomp_send_sigsys and Documentation/prctl/seccomp_filter.txt.
+ * See seccomp_send_sigsys and Documentation/userspace-api/seccomp_filter.rst.
*
* We could optimize the seccomp disabled case, but performance
* here doesn't matter.
diff --git a/arch/xtensa/include/asm/cacheflush.h b/arch/xtensa/include/asm/cacheflush.h
index 397d6a1a4224..a0d50be5a8cb 100644
--- a/arch/xtensa/include/asm/cacheflush.h
+++ b/arch/xtensa/include/asm/cacheflush.h
@@ -88,7 +88,7 @@ static inline void __invalidate_icache_page_alias(unsigned long virt,
*
* Pages can get remapped. Because this might change the 'color' of that page,
* we have to flush the cache before the PTE is changed.
- * (see also Documentation/cachetlb.txt)
+ * (see also Documentation/core-api/cachetlb.rst)
*/
#if defined(CONFIG_MMU) && \
@@ -152,7 +152,7 @@ void local_flush_cache_page(struct vm_area_struct *vma,
__invalidate_icache_range(start,(end) - (start)); \
} while (0)
-/* This is not required, see Documentation/cachetlb.txt */
+/* This is not required, see Documentation/core-api/cachetlb.rst */
#define flush_icache_page(vma,page) do { } while (0)
#define flush_dcache_mmap_lock(mapping) do { } while (0)
diff --git a/block/Kconfig b/block/Kconfig
index 28ec55752b68..eb50fd4977c2 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -114,7 +114,7 @@ config BLK_DEV_THROTTLING
one needs to mount and use blkio cgroup controller for creating
cgroups and specifying per device IO rate policies.
- See Documentation/cgroups/blkio-controller.txt for more information.
+ See Documentation/cgroup-v1/blkio-controller.txt for more information.
config BLK_DEV_THROTTLING_LOW
bool "Block throttling .low limit interface support (EXPERIMENTAL)"
diff --git a/certs/Kconfig b/certs/Kconfig
index 5f7663df6e8e..c94e93d8bccf 100644
--- a/certs/Kconfig
+++ b/certs/Kconfig
@@ -13,7 +13,7 @@ config MODULE_SIG_KEY
If this option is unchanged from its default "certs/signing_key.pem",
then the kernel will automatically generate the private key and
- certificate as described in Documentation/module-signing.txt
+ certificate as described in Documentation/admin-guide/module-signing.rst
config SYSTEM_TRUSTED_KEYRING
bool "Provide system-wide ring of trusted keys"
diff --git a/crypto/asymmetric_keys/asymmetric_type.c b/crypto/asymmetric_keys/asymmetric_type.c
index 39aecad286fe..26539e9a8bda 100644
--- a/crypto/asymmetric_keys/asymmetric_type.c
+++ b/crypto/asymmetric_keys/asymmetric_type.c
@@ -1,6 +1,6 @@
/* Asymmetric public-key cryptography key type
*
- * See Documentation/security/asymmetric-keys.txt
+ * See Documentation/crypto/asymmetric-keys.txt
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
diff --git a/crypto/asymmetric_keys/signature.c b/crypto/asymmetric_keys/signature.c
index 11b7ba170904..28198314bc39 100644
--- a/crypto/asymmetric_keys/signature.c
+++ b/crypto/asymmetric_keys/signature.c
@@ -1,6 +1,6 @@
/* Signature verification with an asymmetric key
*
- * See Documentation/security/asymmetric-keys.txt
+ * See Documentation/crypto/asymmetric-keys.txt
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 410c30c42120..212f447938ae 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -81,7 +81,7 @@ config PRINTER
corresponding drivers into the kernel.
To compile this driver as a module, choose M here and read
- <file:Documentation/parport.txt>. The module will be called lp.
+ <file:Documentation/admin-guide/parport.rst>. The module will be called lp.
If you have several parallel ports, you can specify which ports to
use with the "lp" kernel command line option. (Try "man bootparam"
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index a24a6afb50b6..9760b526ca31 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -6,7 +6,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Standard functionality for the common clock API. See Documentation/clk.txt
+ * Standard functionality for the common clock API. See Documentation/driver-api/clk.rst
*/
#include <linux/clk.h>
@@ -2747,7 +2747,7 @@ static int __clk_core_init(struct clk_core *core)
goto out;
}
- /* check that clk_ops are sane. See Documentation/clk.txt */
+ /* check that clk_ops are sane. See Documentation/driver-api/clk.rst */
if (core->ops->set_rate &&
!((core->ops->round_rate || core->ops->determine_rate) &&
core->ops->recalc_rate)) {
diff --git a/drivers/clk/ingenic/cgu.h b/drivers/clk/ingenic/cgu.h
index 542192376ebf..502bcbb61b04 100644
--- a/drivers/clk/ingenic/cgu.h
+++ b/drivers/clk/ingenic/cgu.h
@@ -194,7 +194,7 @@ struct ingenic_cgu {
/**
* struct ingenic_clk - private data for a clock
- * @hw: see Documentation/clk.txt
+ * @hw: see Documentation/driver-api/clk.rst
* @cgu: a pointer to the CGU data
* @idx: the index of this clock in cgu->clock_info
*/
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index b451354735d3..08ba8473a284 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -38,7 +38,7 @@
* Each device has a channels list, which runs unlocked but is never modified
* once the device is registered, it's just setup by the driver.
*
- * See Documentation/dmaengine.txt for more details
+ * See Documentation/driver-api/dmaengine for more details
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/gpu/vga/Kconfig b/drivers/gpu/vga/Kconfig
index 29437eabe095..b677e5d524e6 100644
--- a/drivers/gpu/vga/Kconfig
+++ b/drivers/gpu/vga/Kconfig
@@ -6,7 +6,7 @@ config VGA_ARB
Some "legacy" VGA devices implemented on PCI typically have the same
hard-decoded addresses as they did on ISA. When multiple PCI devices
are accessed at same time they need some kind of coordination. Please
- see Documentation/vgaarbiter.txt for more details. Select this to
+ see Documentation/gpu/vgaarbiter.rst for more details. Select this to
enable VGA arbiter.
config VGA_ARB_MAX_GPUS
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 1c5e74cb9279..c61b04555779 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -1,6 +1,6 @@
/*
* vgaarb.c: Implements the VGA arbitration. For details refer to
- * Documentation/vgaarbiter.txt
+ * Documentation/gpu/vgaarbiter.rst
*
*
* (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/drivers/hid/usbhid/Kconfig b/drivers/hid/usbhid/Kconfig
index 0108c5991a04..e50d8fe4d36c 100644
--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -14,7 +14,7 @@ config USB_HID
You can't use this driver and the HIDBP (Boot Protocol) keyboard
and mouse drivers at the same time. More information is available:
- <file:Documentation/input/input.txt>.
+ <file:Documentation/input/input.rst>.
If unsure, say Y.
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index ff8037798779..c5992cd195a1 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -16,7 +16,7 @@ config INPUT
Say N here if you have a headless (no monitor, no keyboard) system.
- More information is available: <file:Documentation/input/input.txt>
+ More information is available: <file:Documentation/input/input.rst>
If unsure, say Y.
@@ -144,7 +144,7 @@ config INPUT_JOYDEV
If unsure, say Y.
- More information is available: <file:Documentation/input/joystick.txt>
+ More information is available: <file:Documentation/input/joydev/joystick.rst>
To compile this driver as a module, choose M here: the
module will be called joydev.
diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index 9591fc04a8ab..d8f9c6e1fc08 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -9,7 +9,7 @@ menuconfig INPUT_JOYSTICK
and the list of supported devices will be displayed. This option
doesn't affect the kernel.
- Please read the file <file:Documentation/input/joystick.txt> which
+ Please read the file <file:Documentation/input/joydev/joystick.rst> which
contains more information.
if INPUT_JOYSTICK
@@ -25,7 +25,7 @@ config JOYSTICK_ANALOG
Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or
Saitek Cyborg joysticks.
- Please read the file <file:Documentation/input/joystick.txt> which
+ Please read the file <file:Documentation/input/joydev/joystick.rst> which
contains more information.
To compile this driver as a module, choose M here: the
@@ -214,7 +214,7 @@ config JOYSTICK_DB9
gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga,
Commodore, Amstrad CPC joystick connected to your parallel port.
For more information on how to use the driver please read
- <file:Documentation/input/joystick-parport.txt>.
+ <file:Documentation/input/devices/joystick-parport.rst>.
To compile this driver as a module, choose M here: the
module will be called db9.
@@ -229,7 +229,7 @@ config JOYSTICK_GAMECON
Sony PlayStation gamepad or a Multisystem -- Atari, Amiga,
Commodore, Amstrad CPC joystick connected to your parallel port.
For more information on how to use the driver please read
- <file:Documentation/input/joystick-parport.txt>.
+ <file:Documentation/input/devices/joystick-parport.rst>.
To compile this driver as a module, choose M here: the
module will be called gamecon.
@@ -241,7 +241,7 @@ config JOYSTICK_TURBOGRAFX
Say Y here if you have the TurboGraFX interface by Steffen Schwenke,
and want to use it with Multisystem -- Atari, Amiga, Commodore,
Amstrad CPC joystick. For more information on how to use the driver
- please read <file:Documentation/input/joystick-parport.txt>.
+ please read <file:Documentation/input/devices/joystick-parport.rst>.
To compile this driver as a module, choose M here: the
module will be called turbografx.
@@ -287,7 +287,7 @@ config JOYSTICK_XPAD
and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well.
For information about how to connect the X-Box pad to USB, see
- <file:Documentation/input/xpad.txt>.
+ <file:Documentation/input/devices/xpad.rst>.
To compile this driver as a module, choose M here: the
module will be called xpad.
@@ -313,7 +313,7 @@ config JOYSTICK_WALKERA0701
Say Y or M here if you have a Walkera WK-0701 transmitter which is
supplied with a ready to fly Walkera helicopters such as HM36,
HM37, HM60 and want to use it via parport as a joystick. More
- information is available: <file:Documentation/input/walkera0701.txt>
+ information is available: <file:Documentation/input/devices/walkera0701.rst>
To compile this driver as a module, choose M here: the
module will be called walkera0701.
diff --git a/drivers/input/joystick/iforce/Kconfig b/drivers/input/joystick/iforce/Kconfig
index 8fde22a021b3..ab4dbcbcbf50 100644
--- a/drivers/input/joystick/iforce/Kconfig
+++ b/drivers/input/joystick/iforce/Kconfig
@@ -27,6 +27,6 @@ config JOYSTICK_IFORCE_232
connected to your serial (COM) port.
You will need an additional utility called inputattach, see
- <file:Documentation/input/joystick.txt>
- and <file:Documentation/input/ff.txt>.
+ <file:Documentation/input/joydev/joystick.rst>
+ and <file:Documentation/input/ff.rst>.
diff --git a/drivers/input/joystick/walkera0701.c b/drivers/input/joystick/walkera0701.c
index 36a5b93156ed..dce313dc260a 100644
--- a/drivers/input/joystick/walkera0701.c
+++ b/drivers/input/joystick/walkera0701.c
@@ -3,7 +3,7 @@
*
* Copyright (c) 2008 Peter Popovec
*
- * More about driver: <file:Documentation/input/walkera0701.txt>
+ * More about driver: <file:Documentation/input/devices/walkera0701.rst>
*/
/*
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 572b15fa18c2..c25606e00693 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -411,7 +411,7 @@ config INPUT_YEALINK
usb sound driver, so you might want to enable that as well.
For information about how to use these additional functions, see
- <file:Documentation/input/yealink.txt>.
+ <file:Documentation/input/devices/yealink.rst>.
To compile this driver as a module, choose M here: the module will be
called yealink.
@@ -595,7 +595,7 @@ config INPUT_GPIO_ROTARY_ENCODER
depends on GPIOLIB || COMPILE_TEST
help
Say Y here to add support for rotary encoders connected to GPIO lines.
- Check file:Documentation/input/rotary-encoder.txt for more
+ Check file:Documentation/input/devices/rotary-encoder.rst for more
information.
To compile this driver as a module, choose M here: the
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index 6d304381fc30..30ec77ad32c6 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -7,7 +7,7 @@
* state machine code inspired by code from Tim Ruetz
*
* A generic driver for rotary encoders connected to GPIO lines.
- * See file:Documentation/input/rotary-encoder.txt for more information
+ * See file:Documentation/input/devices/rotary-encoder.rst for more information
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index f27f23f2d99a..566a1e3aa504 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -129,7 +129,7 @@ config MOUSE_PS2_ELANTECH
This driver exposes some configuration registers via sysfs
entries. For further information,
- see <file:Documentation/input/elantech.txt>.
+ see <file:Documentation/input/devices/elantech.rst>.
If unsure, say N.
@@ -228,7 +228,7 @@ config MOUSE_APPLETOUCH
scrolling in X11.
For further information, see
- <file:Documentation/input/appletouch.txt>.
+ <file:Documentation/input/devices/appletouch.rst>.
To compile this driver as a module, choose M here: the
module will be called appletouch.
@@ -251,7 +251,7 @@ config MOUSE_BCM5974
The interface is currently identical to the appletouch interface,
for further information, see
- <file:Documentation/input/appletouch.txt>.
+ <file:Documentation/input/devices/appletouch.rst>.
To compile this driver as a module, choose M here: the
module will be called bcm5974.
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index cb5579716dba..0a6f7ca883e7 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -212,7 +212,7 @@ static void alps_set_abs_params_v7(struct alps_data *priv,
static void alps_set_abs_params_ss4_v2(struct alps_data *priv,
struct input_dev *dev1);
-/* Packet formats are described in Documentation/input/alps.txt */
+/* Packet formats are described in Documentation/input/devices/alps.rst */
static bool alps_is_valid_first_byte(struct alps_data *priv,
unsigned char data)
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index ca4530eb3378..d90d9f1098ff 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -47,7 +47,7 @@ config SERIO_SERPORT
Say Y here if you plan to use an input device (mouse, joystick,
tablet, 6dof) that communicates over the RS232 serial (COM) port.
- More information is available: <file:Documentation/input/input.txt>
+ More information is available: <file:Documentation/input/input.rst>
If unsure, say Y.
@@ -78,7 +78,7 @@ config SERIO_PARKBD
Say Y here if you built a simple parallel port adapter to attach
an additional AT keyboard, XT keyboard or PS/2 mouse.
- More information is available: <file:Documentation/input/input.txt>
+ More information is available: <file:Documentation/input/input.rst>
If unsure, say N.
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index fd714ee881f7..2566b4d8b342 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -68,7 +68,7 @@
* The default values correspond to Mainstone II in QVGA mode
*
* Please read
- * Documentation/input/input-programming.txt for more details.
+ * Documentation/input/input-programming.rst for more details.
*/
static int abs_x[3] = {150, 4000, 5};
diff --git a/drivers/lightnvm/pblk-rb.c b/drivers/lightnvm/pblk-rb.c
index 00cd1f20a196..55e9442a99e2 100644
--- a/drivers/lightnvm/pblk-rb.c
+++ b/drivers/lightnvm/pblk-rb.c
@@ -38,7 +38,7 @@ void pblk_rb_data_free(struct pblk_rb *rb)
/*
* Initialize ring buffer. The data and metadata buffers must be previously
* allocated and their size must be a power of two
- * (Documentation/circular-buffers.txt)
+ * (Documentation/core-api/circular-buffers.rst)
*/
int pblk_rb_init(struct pblk_rb *rb, struct pblk_rb_entry *rb_entry_base,
unsigned int power_size, unsigned int power_seg_sz)
diff --git a/drivers/md/bcache/Kconfig b/drivers/md/bcache/Kconfig
index 4d200883c505..17bf109c58e9 100644
--- a/drivers/md/bcache/Kconfig
+++ b/drivers/md/bcache/Kconfig
@@ -5,7 +5,7 @@ config BCACHE
Allows a block device to be used as cache for other devices; uses
a btree for indexing and the layout is optimized for SSDs.
- See Documentation/bcache.txt for details.
+ See Documentation/admin-guide/bcache.rst for details.
config BCACHE_DEBUG
bool "Bcache debugging"
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c
index 2a0968c04e21..547c9eedc2f4 100644
--- a/drivers/md/bcache/btree.c
+++ b/drivers/md/bcache/btree.c
@@ -18,7 +18,7 @@
* as keys are inserted we only sort the pages that have not yet been written.
* When garbage collection is run, we resort the entire node.
*
- * All configuration is done via sysfs; see Documentation/bcache.txt.
+ * All configuration is done via sysfs; see Documentation/admin-guide/bcache.rst.
*/
#include "bcache.h"
diff --git a/drivers/md/bcache/extents.c b/drivers/md/bcache/extents.c
index c334e6666461..1d096742eb41 100644
--- a/drivers/md/bcache/extents.c
+++ b/drivers/md/bcache/extents.c
@@ -18,7 +18,7 @@
* as keys are inserted we only sort the pages that have not yet been written.
* When garbage collection is run, we resort the entire node.
*
- * All configuration is done via sysfs; see Documentation/bcache.txt.
+ * All configuration is done via sysfs; see Documentation/admin-guide/bcache.rst.
*/
#include "bcache.h"
diff --git a/drivers/media/dvb-core/dvb_ringbuffer.c b/drivers/media/dvb-core/dvb_ringbuffer.c
index 4330b6fa4af2..d1d471af0636 100644
--- a/drivers/media/dvb-core/dvb_ringbuffer.c
+++ b/drivers/media/dvb-core/dvb_ringbuffer.c
@@ -55,7 +55,7 @@ int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf)
* this pairs with smp_store_release() in dvb_ringbuffer_write(),
* dvb_ringbuffer_write_user(), or dvb_ringbuffer_reset()
*
- * for memory barriers also see Documentation/circular-buffers.txt
+ * for memory barriers also see Documentation/core-api/circular-buffers.rst
*/
return (rbuf->pread == smp_load_acquire(&rbuf->pwrite));
}
diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig
index 55e36a4f5215..9ecaa9d0744a 100644
--- a/drivers/media/dvb-frontends/Kconfig
+++ b/drivers/media/dvb-frontends/Kconfig
@@ -324,7 +324,7 @@ config DVB_SP8870
A DVB-T tuner module. Say Y when you want to support this frontend.
This driver needs external firmware. Please use the command
- "<kerneldir>/Documentation/dvb/get_dvb_firmware sp8870" to
+ "<kerneldir>/scripts/get_dvb_firmware sp8870" to
download/extract it, and then copy it to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
@@ -336,7 +336,7 @@ config DVB_SP887X
A DVB-T tuner module. Say Y when you want to support this frontend.
This driver needs external firmware. Please use the command
- "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
+ "<kerneldir>/scripts/get_dvb_firmware sp887x" to
download/extract it, and then copy it to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
@@ -387,8 +387,8 @@ config DVB_TDA1004X
A DVB-T tuner module. Say Y when you want to support this frontend.
This driver needs external firmware. Please use the commands
- "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
- "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
+ "<kerneldir>/scripts/get_dvb_firmware tda10045",
+ "<kerneldir>/scripts/get_dvb_firmware tda10046" to
download/extract them, and then copy them to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
@@ -591,8 +591,8 @@ config DVB_NXT200X
to support this frontend.
This driver needs external firmware. Please use the commands
- "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" and
- "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to
+ "<kerneldir>/scripts/get_dvb_firmware nxt2002" and
+ "<kerneldir>/scripts/get_dvb_firmware nxt2004" to
download/extract them, and then copy them to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
@@ -604,7 +604,7 @@ config DVB_OR51211
An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
This driver needs external firmware. Please use the command
- "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
+ "<kerneldir>/scripts/get_dvb_firmware or51211" to
download it, and then copy it to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
@@ -617,8 +617,8 @@ config DVB_OR51132
to support this frontend.
This driver needs external firmware. Please use the commands
- "<kerneldir>/Documentation/dvb/get_dvb_firmware or51132_vsb" and/or
- "<kerneldir>/Documentation/dvb/get_dvb_firmware or51132_qam" to
+ "<kerneldir>/scripts/get_dvb_firmware or51132_vsb" and/or
+ "<kerneldir>/scripts/get_dvb_firmware or51132_qam" to
download firmwares for 8VSB and QAM64/256, respectively. Copy them to
/usr/lib/hotplug/firmware or /lib/firmware (depending on
configuration of firmware hotplug).
diff --git a/drivers/media/dvb-frontends/dib3000.h b/drivers/media/dvb-frontends/dib3000.h
index d5dfafb4ef13..d2b7523a22b5 100644
--- a/drivers/media/dvb-frontends/dib3000.h
+++ b/drivers/media/dvb-frontends/dib3000.h
@@ -17,7 +17,7 @@
* Amaury Demol from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*
*/
diff --git a/drivers/media/dvb-frontends/dib3000mb.c b/drivers/media/dvb-frontends/dib3000mb.c
index de3ce2786c72..5861f346db49 100644
--- a/drivers/media/dvb-frontends/dib3000mb.c
+++ b/drivers/media/dvb-frontends/dib3000mb.c
@@ -17,7 +17,7 @@
* Amaury Demol from DiBcom for providing specs and driver
* sources, on which this driver (and the dvb-dibusb) are based.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*
*/
diff --git a/drivers/media/dvb-frontends/eds1547.h b/drivers/media/dvb-frontends/eds1547.h
index c983f2f85802..30f067fc1f56 100644
--- a/drivers/media/dvb-frontends/eds1547.h
+++ b/drivers/media/dvb-frontends/eds1547.h
@@ -6,7 +6,7 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*
-* see Documentation/dvb/README.dvb-usb for more information
+* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef EDS1547
diff --git a/drivers/media/dvb-frontends/nxt200x.c b/drivers/media/dvb-frontends/nxt200x.c
index 7aa74403648e..a6cc4952eb74 100644
--- a/drivers/media/dvb-frontends/nxt200x.c
+++ b/drivers/media/dvb-frontends/nxt200x.c
@@ -27,8 +27,8 @@
* ATI HDTV Wonder (NXT2004)
*
* This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2002" or
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware nxt2004" to
+ * "<kerneldir>/scripts/get_dvb_firmware nxt2002" or
+ * "<kerneldir>/scripts/get_dvb_firmware nxt2004" to
* download/extract the appropriate firmware, and then copy it to
* /usr/lib/hotplug/firmware/ or /lib/firmware/
* (depending on configuration of firmware hotplug).
diff --git a/drivers/media/dvb-frontends/or51211.c b/drivers/media/dvb-frontends/or51211.c
index a1b7c301828f..b65ba34fd00a 100644
--- a/drivers/media/dvb-frontends/or51211.c
+++ b/drivers/media/dvb-frontends/or51211.c
@@ -22,7 +22,7 @@
/*
* This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware or51211" to
+ * "<kerneldir>/scripts/get_dvb_firmware or51211" to
* download/extract it, and then copy it to /usr/lib/hotplug/firmware
* or /lib/firmware (depending on configuration of firmware hotplug).
*/
diff --git a/drivers/media/dvb-frontends/sp8870.c b/drivers/media/dvb-frontends/sp8870.c
index 9a726f3a4896..1d57a20093fc 100644
--- a/drivers/media/dvb-frontends/sp8870.c
+++ b/drivers/media/dvb-frontends/sp8870.c
@@ -21,7 +21,7 @@
*/
/*
* This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
+ * "<kerneldir>/scripts/get_dvb_firmware alps_tdlb7" to
* download/extract it, and then copy it to /usr/lib/hotplug/firmware
* or /lib/firmware (depending on configuration of firmware hotplug).
*/
diff --git a/drivers/media/dvb-frontends/sp887x.c b/drivers/media/dvb-frontends/sp887x.c
index f39d566d7d1d..57a0d0ae2b48 100644
--- a/drivers/media/dvb-frontends/sp887x.c
+++ b/drivers/media/dvb-frontends/sp887x.c
@@ -4,7 +4,7 @@
/*
* This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
+ * "<kerneldir>/scripts/get_dvb_firmware sp887x" to
* download/extract it, and then copy it to /usr/lib/hotplug/firmware
* or /lib/firmware (depending on configuration of firmware hotplug).
*/
diff --git a/drivers/media/dvb-frontends/tda1004x.c b/drivers/media/dvb-frontends/tda1004x.c
index 58e3beff5adc..7dcfb4a4b2d0 100644
--- a/drivers/media/dvb-frontends/tda1004x.c
+++ b/drivers/media/dvb-frontends/tda1004x.c
@@ -21,8 +21,8 @@
*/
/*
* This driver needs external firmware. Please use the commands
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10045",
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware tda10046" to
+ * "<kerneldir>/scripts/get_dvb_firmware tda10045",
+ * "<kerneldir>/scripts/get_dvb_firmware tda10046" to
* download/extract them, and then copy them to /usr/lib/hotplug/firmware
* or /lib/firmware (depending on configuration of firmware hotplug).
*/
diff --git a/drivers/media/dvb-frontends/tda10071.c b/drivers/media/dvb-frontends/tda10071.c
index a59f4fd09df6..1ed67c08e699 100644
--- a/drivers/media/dvb-frontends/tda10071.c
+++ b/drivers/media/dvb-frontends/tda10071.c
@@ -852,7 +852,7 @@ static int tda10071_init(struct dvb_frontend *fe)
ret = request_firmware(&fw, fw_file, &client->dev);
if (ret) {
dev_err(&client->dev,
- "did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)\n",
+ "did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n",
fw_file, ret);
goto error;
}
diff --git a/drivers/media/dvb-frontends/z0194a.h b/drivers/media/dvb-frontends/z0194a.h
index 96d86d6eb473..0871c1ade94c 100644
--- a/drivers/media/dvb-frontends/z0194a.h
+++ b/drivers/media/dvb-frontends/z0194a.h
@@ -6,7 +6,7 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*
-* see Documentation/dvb/README.dvb-usb for more information
+* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef Z0194A
diff --git a/drivers/media/i2c/max2175.c b/drivers/media/i2c/max2175.c
index 87cba15b2977..008a082cb8ad 100644
--- a/drivers/media/i2c/max2175.c
+++ b/drivers/media/i2c/max2175.c
@@ -1202,7 +1202,7 @@ static const struct v4l2_ctrl_ops max2175_ctrl_ops = {
/*
* I2S output enable/disable configuration. This is a private control.
- * Refer to Documentation/media/v4l-drivers/max2175 for more details.
+ * Refer to Documentation/media/v4l-drivers/max2175.rst for more details.
*/
static const struct v4l2_ctrl_config max2175_i2s_en = {
.ops = &max2175_ctrl_ops,
@@ -1218,7 +1218,7 @@ static const struct v4l2_ctrl_config max2175_i2s_en = {
/*
* HSLS value control LO freq adjacent location configuration.
- * Refer to Documentation/media/v4l-drivers/max2175 for more details.
+ * Refer to Documentation/media/v4l-drivers/max2175.rst for more details.
*/
static const struct v4l2_ctrl_config max2175_hsls = {
.ops = &max2175_ctrl_ops,
@@ -1234,7 +1234,7 @@ static const struct v4l2_ctrl_config max2175_hsls = {
/*
* Rx modes below are a set of preset configurations that decides the tuner's
* sck and sample rate of transmission. They are separate for EU & NA regions.
- * Refer to Documentation/media/v4l-drivers/max2175 for more details.
+ * Refer to Documentation/media/v4l-drivers/max2175.rst for more details.
*/
static const char * const max2175_ctrl_eu_rx_modes[] = {
[MAX2175_EU_FM_1_2] = "EU FM 1.2",
diff --git a/drivers/media/pci/bt8xx/Kconfig b/drivers/media/pci/bt8xx/Kconfig
index 4a93f6ded100..bc89e37608cd 100644
--- a/drivers/media/pci/bt8xx/Kconfig
+++ b/drivers/media/pci/bt8xx/Kconfig
@@ -16,7 +16,7 @@ config VIDEO_BT848
---help---
Support for BT848 based frame grabber/overlay boards. This includes
the Miro, Hauppauge and STB boards. Please read the material in
- <file:Documentation/video4linux/bttv/> for more information.
+ <file:Documentation/media/v4l-drivers/bttv.rst> for more information.
To compile this driver as a module, choose M here: the
module will be called bttv.
diff --git a/drivers/media/pci/cx18/cx18-dvb.c b/drivers/media/pci/cx18/cx18-dvb.c
index 010f39eafce1..a3a7f7065349 100644
--- a/drivers/media/pci/cx18/cx18-dvb.c
+++ b/drivers/media/pci/cx18/cx18-dvb.c
@@ -152,7 +152,7 @@ static int yuan_mpc718_mt352_reqfw(struct cx18_stream *stream,
if (ret) {
CX18_ERR("The MPC718 board variant with the MT352 DVB-T demodulator will not work without it\n");
- CX18_ERR("Run 'linux/Documentation/dvb/get_dvb_firmware mpc718' if you need the firmware\n");
+ CX18_ERR("Run 'linux/scripts/get_dvb_firmware mpc718' if you need the firmware\n");
}
return ret;
}
diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c
index a594cfdeca20..b36f4ce25d22 100644
--- a/drivers/media/pci/cx18/cx18-streams.c
+++ b/drivers/media/pci/cx18/cx18-streams.c
@@ -853,7 +853,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
/*
* Audio related reset according to
- * Documentation/video4linux/cx2341x/fw-encoder-api.txt
+ * Documentation/media/v4l-drivers/cx2341x.rst
*/
if (atomic_read(&cx->ana_capturing) == 0)
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
@@ -861,7 +861,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
/*
* Number of lines for Field 1 & Field 2 according to
- * Documentation/video4linux/cx2341x/fw-encoder-api.txt
+ * Documentation/media/v4l-drivers/cx2341x.rst
* Field 1 is 312 for 625 line systems in BT.656
* Field 2 is 313 for 625 line systems in BT.656
*/
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 3a1c55187b2a..9f50748fdf56 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -2426,7 +2426,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ret = request_firmware(&fw, filename, &dev->pci->dev);
if (ret != 0)
- pr_err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+ pr_err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware.",
filename);
else
altera_init(&netup_config, fw);
diff --git a/drivers/media/pci/meye/Kconfig b/drivers/media/pci/meye/Kconfig
index 2e60334ffef5..9a50f54231ad 100644
--- a/drivers/media/pci/meye/Kconfig
+++ b/drivers/media/pci/meye/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_MEYE
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
- <file:Documentation/video4linux/meye.txt> for more information.
+ <file:Documentation/media/v4l-drivers/meye.rst> for more information.
If you say Y or M here, you need to say Y or M to "Sony Laptop
Extras" in the misc device section.
diff --git a/drivers/media/pci/ttpci/Kconfig b/drivers/media/pci/ttpci/Kconfig
index 7b83151ed6c4..dfba74dd6521 100644
--- a/drivers/media/pci/ttpci/Kconfig
+++ b/drivers/media/pci/ttpci/Kconfig
@@ -24,7 +24,7 @@ config DVB_AV7110
onboard MPEG2 decoder.
This driver needs an external firmware. Please use the script
- "<kerneldir>/Documentation/dvb/get_dvb_firmware av7110" to
+ "<kerneldir>/scripts/get_dvb_firmware av7110" to
download/extract it, and then copy it to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index 4d5a26b4cdda..d85ffbfb7c1f 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -1021,7 +1021,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
* - a videobuffer is queued on the pcdev->capture list
*
* Please check the "DMA hot chaining timeslice issue" in
- * Documentation/video4linux/pxa_camera.txt
+ * Documentation/media/v4l-drivers/pxa_camera.rst
*
* Context: should only be called within the dma irq handler
*/
@@ -1443,7 +1443,7 @@ static void pxac_vb2_queue(struct vb2_buffer *vb)
/*
* Please check the DMA prepared buffer structure in :
- * Documentation/video4linux/pxa_camera.txt
+ * Documentation/media/v4l-drivers/pxa_camera.rst
* Please check also in pxa_camera_check_link_miss() to understand why DMA chain
* modification while DMA chain is running will work anyway.
*/
diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c
index 242342fd7ede..9897213f2618 100644
--- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c
+++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c
@@ -1111,7 +1111,7 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd)
/*
* CEU can scale and crop, but we don't want to waste bandwidth and kill the
* framerate by always requesting the maximum image from the client. See
- * Documentation/video4linux/sh_mobile_ceu_camera.txt for a description of
+ * Documentation/media/v4l-drivers/sh_mobile_ceu_camera.rst for a description of
* scaling and cropping algorithms and for the meaning of referenced here steps.
*/
static int sh_mobile_ceu_set_selection(struct soc_camera_device *icd,
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 39b04ad924c0..9b99dfb2d0c6 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -35,7 +35,7 @@ config RADIO_SI476X
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux 2 API. Information on
this API and pointers to "v4l2" programs may be found at
- <file:Documentation/video4linux/API.html>.
+ <file:Documentation/media/media_uapi.rst>.
To compile this driver as a module, choose M here: the
module will be called radio-si476x.
@@ -75,7 +75,7 @@ config RADIO_MAXIRADIO
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
+ <file:Documentation/media/media_uapi.rst>.
To compile this driver as a module, choose M here: the
module will be called radio-maxiradio.
@@ -93,7 +93,7 @@ config RADIO_SHARK
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
+ <file:Documentation/media/media_uapi.rst>.
To compile this driver as a module, choose M here: the
module will be called radio-shark.
@@ -110,7 +110,7 @@ config RADIO_SHARK2
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
this API and pointers to "v4l" programs may be found at
- <file:Documentation/video4linux/API.html>.
+ <file:Documentation/media/media_uapi.rst>.
To compile this driver as a module, choose M here: the
module will be called radio-shark2.
@@ -217,7 +217,7 @@ config RADIO_WL1273
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux 2 API. Information on
this API and pointers to "v4l2" programs may be found at
- <file:Documentation/video4linux/API.html>.
+ <file:Documentation/media/media_uapi.rst>.
To compile this driver as a module, choose M here: the
module will be called radio-wl1273.
@@ -272,7 +272,7 @@ config RADIO_RTRACK
been reported to be used by these cards.
More information is contained in the file
- <file:Documentation/video4linux/radiotrack.txt>.
+ <file:Documentation/media/v4l-drivers/radiotrack.rst>.
To compile this driver as a module, choose M here: the
module will be called radio-aimslab.
diff --git a/drivers/media/radio/si470x/Kconfig b/drivers/media/radio/si470x/Kconfig
index a21172e413a9..6dbb158cd2a0 100644
--- a/drivers/media/radio/si470x/Kconfig
+++ b/drivers/media/radio/si470x/Kconfig
@@ -29,7 +29,7 @@ config USB_SI470X
Please have a look at the documentation, especially on how
to redirect the audio stream from the radio to your sound device:
- Documentation/video4linux/si470x.txt
+ Documentation/media/v4l-drivers/si470x.rst
Say Y here if you want to connect this type of radio to your
computer's USB port.
diff --git a/drivers/media/radio/wl128x/Kconfig b/drivers/media/radio/wl128x/Kconfig
index 2add222ea346..64b66bbdae72 100644
--- a/drivers/media/radio/wl128x/Kconfig
+++ b/drivers/media/radio/wl128x/Kconfig
@@ -12,6 +12,6 @@ config RADIO_WL128X
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux 2 API. Information on
this API and pointers to "v4l2" programs may be found at
- <file:Documentation/video4linux/API.html>.
+ <file:Documentation/media/media_uapi.rst>.
endmenu
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig
index 37053477b84d..082b8d67244b 100644
--- a/drivers/media/usb/dvb-usb-v2/Kconfig
+++ b/drivers/media/usb/dvb-usb-v2/Kconfig
@@ -6,7 +6,7 @@ config DVB_USB_V2
USB1.1 and USB2.0 DVB devices.
Almost every USB device needs a firmware, please look into
- <file:Documentation/dvb/README.dvb-usb>.
+ <file:Documentation/media/dvb-drivers/dvb-usb.rst>.
For a complete list of supported USB devices see the LinuxTV DVB Wiki:
<https://linuxtv.org/wiki/index.php/DVB_USB>
diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
index afdcdbf005e9..955318ab7f5e 100644
--- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
+++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c
@@ -47,7 +47,7 @@ static int dvb_usbv2_download_firmware(struct dvb_usb_device *d,
ret = request_firmware(&fw, name, &d->udev->dev);
if (ret < 0) {
dev_err(&d->udev->dev,
- "%s: Did not find the firmware file '%s'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status %d\n",
+ "%s: Did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware\n",
KBUILD_MODNAME, name, ret);
goto err;
}
diff --git a/drivers/media/usb/dvb-usb-v2/gl861.c b/drivers/media/usb/dvb-usb-v2/gl861.c
index 4817dfd3e659..9d154fdae45b 100644
--- a/drivers/media/usb/dvb-usb-v2/gl861.c
+++ b/drivers/media/usb/dvb-usb-v2/gl861.c
@@ -4,7 +4,7 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "gl861.h"
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.c b/drivers/media/usb/dvb-usb-v2/lmedm04.c
index be26c029546b..0750a975bcb8 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.c
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.c
@@ -21,7 +21,7 @@
*
* LME2510C + M88RS2000
*
- * For firmware see Documentation/dvb/lmedm04.txt
+ * For firmware see Documentation/media/dvb-drivers/lmedm04.rst
*
* I2C addresses:
* 0xd0 - STV0288 - Demodulator
@@ -49,7 +49,7 @@
* GNU General Public License for more details.
*
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*
* Known Issues :
* LME2510: Non Intel USB chipsets fail to maintain High Speed on
diff --git a/drivers/media/usb/dvb-usb-v2/lmedm04.h b/drivers/media/usb/dvb-usb-v2/lmedm04.h
index e9c207205c2f..c4ae37c19512 100644
--- a/drivers/media/usb/dvb-usb-v2/lmedm04.h
+++ b/drivers/media/usb/dvb-usb-v2/lmedm04.h
@@ -16,7 +16,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
* *
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_LME2510_H_
#define _DVB_USB_LME2510_H_
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.c b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
index 67953360fda5..4713ba65e1c2 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.c
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.c
@@ -5,7 +5,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include <linux/vmalloc.h>
diff --git a/drivers/media/usb/dvb-usb-v2/mxl111sf.h b/drivers/media/usb/dvb-usb-v2/mxl111sf.h
index 3e6f5880bd1e..22253d4908eb 100644
--- a/drivers/media/usb/dvb-usb-v2/mxl111sf.h
+++ b/drivers/media/usb/dvb-usb-v2/mxl111sf.h
@@ -5,7 +5,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_MXL111SF_H_
diff --git a/drivers/media/usb/dvb-usb/Kconfig b/drivers/media/usb/dvb-usb/Kconfig
index 2651ae277347..b8a1c62a0682 100644
--- a/drivers/media/usb/dvb-usb/Kconfig
+++ b/drivers/media/usb/dvb-usb/Kconfig
@@ -6,7 +6,7 @@ config DVB_USB
USB1.1 and USB2.0 DVB devices.
Almost every USB device needs a firmware, please look into
- <file:Documentation/dvb/README.dvb-usb>.
+ <file:Documentation/media/dvb-drivers/dvb-usb.rst>.
For a complete list of supported USB devices see the LinuxTV DVB Wiki:
<https://linuxtv.org/wiki/index.php/DVB_USB>
diff --git a/drivers/media/usb/dvb-usb/a800.c b/drivers/media/usb/dvb-usb/a800.c
index 540886b3bb29..198bd5eadb3f 100644
--- a/drivers/media/usb/dvb-usb/a800.c
+++ b/drivers/media/usb/dvb-usb/a800.c
@@ -11,7 +11,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/af9005-fe.c b/drivers/media/usb/dvb-usb/af9005-fe.c
index 544bdf18fb2f..7fbbc954da16 100644
--- a/drivers/media/usb/dvb-usb/af9005-fe.c
+++ b/drivers/media/usb/dvb-usb/af9005-fe.c
@@ -15,7 +15,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "af9005.h"
#include "af9005-script.h"
diff --git a/drivers/media/usb/dvb-usb/af9005-remote.c b/drivers/media/usb/dvb-usb/af9005-remote.c
index 9b29ffa93075..f7cdcc8424a8 100644
--- a/drivers/media/usb/dvb-usb/af9005-remote.c
+++ b/drivers/media/usb/dvb-usb/af9005-remote.c
@@ -17,7 +17,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "af9005.h"
/* debug */
diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c
index 986763b1b2b3..16e946e01d2c 100644
--- a/drivers/media/usb/dvb-usb/af9005.c
+++ b/drivers/media/usb/dvb-usb/af9005.c
@@ -15,7 +15,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "af9005.h"
diff --git a/drivers/media/usb/dvb-usb/af9005.h b/drivers/media/usb/dvb-usb/af9005.h
index a1eae0fa02ed..7ae4dc3a968b 100644
--- a/drivers/media/usb/dvb-usb/af9005.h
+++ b/drivers/media/usb/dvb-usb/af9005.h
@@ -15,7 +15,7 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_AF9005_H_
#define _DVB_USB_AF9005_H_
diff --git a/drivers/media/usb/dvb-usb/az6027.c b/drivers/media/usb/dvb-usb/az6027.c
index f0d10ac03a37..6321b8e30261 100644
--- a/drivers/media/usb/dvb-usb/az6027.c
+++ b/drivers/media/usb/dvb-usb/az6027.c
@@ -7,7 +7,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "az6027.h"
diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c
index b70d289dc738..5b51ed7d6243 100644
--- a/drivers/media/usb/dvb-usb/cxusb.c
+++ b/drivers/media/usb/dvb-usb/cxusb.c
@@ -21,7 +21,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include <media/tuner.h>
#include <linux/vmalloc.h>
diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c
index bcacb0f22028..fb1b4f2d5f9d 100644
--- a/drivers/media/usb/dvb-usb/dibusb-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-common.c
@@ -6,7 +6,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/dibusb-mb.c b/drivers/media/usb/dvb-usb/dibusb-mb.c
index a0057641cc86..408920577716 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mb.c
@@ -10,7 +10,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/dibusb-mc-common.c b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
index 0c2bc97436d5..ec3a20a95b04 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mc-common.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mc-common.c
@@ -6,7 +6,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/dibusb-mc.c b/drivers/media/usb/dvb-usb/dibusb-mc.c
index 08fb8a3f6e0c..bce8ffe640ca 100644
--- a/drivers/media/usb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/usb/dvb-usb/dibusb-mc.c
@@ -10,7 +10,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h
index 697be2a17ade..943df579b98b 100644
--- a/drivers/media/usb/dvb-usb/dibusb.h
+++ b/drivers/media/usb/dvb-usb/dibusb.h
@@ -6,7 +6,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_DIBUSB_H_
#define _DVB_USB_DIBUSB_H_
diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c
index 475a3c0cdee7..49b9d63e5885 100644
--- a/drivers/media/usb/dvb-usb/digitv.c
+++ b/drivers/media/usb/dvb-usb/digitv.c
@@ -9,7 +9,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "digitv.h"
diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c
index 00f565fe7cc2..7e75aae34fb8 100644
--- a/drivers/media/usb/dvb-usb/dtt200u-fe.c
+++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c
@@ -7,7 +7,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dtt200u.h"
diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c
index 512370786696..f03d26954517 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.c
+++ b/drivers/media/usb/dvb-usb/dtt200u.c
@@ -9,7 +9,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dtt200u.h"
diff --git a/drivers/media/usb/dvb-usb/dtt200u.h b/drivers/media/usb/dvb-usb/dtt200u.h
index efccc399b1cb..ea2a096c1650 100644
--- a/drivers/media/usb/dvb-usb/dtt200u.h
+++ b/drivers/media/usb/dvb-usb/dtt200u.h
@@ -7,7 +7,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_DTT200U_H_
#define _DVB_USB_DTT200U_H_
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
index 15c153e49382..42c207aacbb1 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-firmware.c
@@ -90,7 +90,7 @@ int dvb_usb_download_firmware(struct usb_device *udev, struct dvb_usb_device_pro
const struct firmware *fw = NULL;
if ((ret = request_firmware(&fw, props->firmware, &udev->dev)) != 0) {
- err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+ err("did not find the firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
props->firmware,ret);
return ret;
}
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index 84308569e7dc..40ca4eafb137 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -9,7 +9,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dvb-usb-common.h"
diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c
index 346946f35b1a..0d4fdd34a710 100644
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -11,7 +11,7 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include <media/dvb-usb-ids.h>
#include "dw2102.h"
@@ -61,9 +61,7 @@
#define P1100_FIRMWARE "dvb-usb-p1100.fw"
#define P7500_FIRMWARE "dvb-usb-p7500.fw"
-#define err_str "did not find the firmware file. (%s) " \
- "Please see linux/Documentation/dvb/ for more details " \
- "on firmware-problems."
+#define err_str "did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware"
struct dw2102_state {
u8 initialized;
diff --git a/drivers/media/usb/dvb-usb/friio-fe.c b/drivers/media/usb/dvb-usb/friio-fe.c
index b2830c157548..932f262452eb 100644
--- a/drivers/media/usb/dvb-usb/friio-fe.c
+++ b/drivers/media/usb/dvb-usb/friio-fe.c
@@ -8,7 +8,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include <linux/init.h>
#include <linux/string.h>
diff --git a/drivers/media/usb/dvb-usb/friio.c b/drivers/media/usb/dvb-usb/friio.c
index 16875945e662..fe799a7ad44b 100644
--- a/drivers/media/usb/dvb-usb/friio.c
+++ b/drivers/media/usb/dvb-usb/friio.c
@@ -8,7 +8,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "friio.h"
diff --git a/drivers/media/usb/dvb-usb/friio.h b/drivers/media/usb/dvb-usb/friio.h
index 0f461ca10cb9..a53af56d035c 100644
--- a/drivers/media/usb/dvb-usb/friio.h
+++ b/drivers/media/usb/dvb-usb/friio.h
@@ -8,7 +8,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_FRIIO_H_
#define _DVB_USB_FRIIO_H_
diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c
index 334b9fb98112..13e96b0aeb0f 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.c
+++ b/drivers/media/usb/dvb-usb/gp8psk.c
@@ -12,7 +12,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "gp8psk.h"
#include "gp8psk-fe.h"
@@ -135,7 +135,7 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
u8 *buf;
if ((ret = request_firmware(&fw, bcm4500_firmware,
&d->udev->dev)) != 0) {
- err("did not find the bcm4500 firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
+ err("did not find the bcm4500 firmware file '%s' (status %d). You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
bcm4500_firmware,ret);
return ret;
}
diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h
index d8975b866dee..fd063e385eaf 100644
--- a/drivers/media/usb/dvb-usb/gp8psk.h
+++ b/drivers/media/usb/dvb-usb/gp8psk.h
@@ -12,7 +12,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_GP8PSK_H_
#define _DVB_USB_GP8PSK_H_
diff --git a/drivers/media/usb/dvb-usb/m920x.c b/drivers/media/usb/dvb-usb/m920x.c
index 32081c2ce0da..51b026fa6bfb 100644
--- a/drivers/media/usb/dvb-usb/m920x.c
+++ b/drivers/media/usb/dvb-usb/m920x.c
@@ -6,7 +6,7 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "m920x.h"
diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c
index 1babd3341910..43e0e0fd715b 100644
--- a/drivers/media/usb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c
@@ -7,7 +7,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/opera1.c b/drivers/media/usb/dvb-usb/opera1.c
index 946a5ccc8f1a..61a377e2373d 100644
--- a/drivers/media/usb/dvb-usb/opera1.c
+++ b/drivers/media/usb/dvb-usb/opera1.c
@@ -7,7 +7,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
-* see Documentation/dvb/README.dvb-usb for more information
+* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#define DVB_USB_LOG_PREFIX "opera"
@@ -453,7 +453,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev,
info("start downloading fpga firmware %s",filename);
if ((ret = request_firmware(&fw, filename, &dev->dev)) != 0) {
- err("did not find the firmware file. (%s) Please see linux/Documentation/dvb/ for more details on firmware-problems.",
+ err("did not find the firmware file '%s'. You can use <kernel_dir>/scripts/get_dvb_firmware to get the firmware",
filename);
return ret;
} else {
diff --git a/drivers/media/usb/dvb-usb/ttusb2.c b/drivers/media/usb/dvb-usb/ttusb2.c
index 12de89665d60..b4d681151599 100644
--- a/drivers/media/usb/dvb-usb/ttusb2.c
+++ b/drivers/media/usb/dvb-usb/ttusb2.c
@@ -20,7 +20,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#define DVB_USB_LOG_PREFIX "ttusb2"
#include "dvb-usb.h"
diff --git a/drivers/media/usb/dvb-usb/ttusb2.h b/drivers/media/usb/dvb-usb/ttusb2.h
index 52a63af40896..8b6525e5fb24 100644
--- a/drivers/media/usb/dvb-usb/ttusb2.h
+++ b/drivers/media/usb/dvb-usb/ttusb2.h
@@ -9,7 +9,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_TTUSB2_H_
#define _DVB_USB_TTUSB2_H_
diff --git a/drivers/media/usb/dvb-usb/umt-010.c b/drivers/media/usb/dvb-usb/umt-010.c
index 58ad5b4f856c..920bc67c3bcb 100644
--- a/drivers/media/usb/dvb-usb/umt-010.c
+++ b/drivers/media/usb/dvb-usb/umt-010.c
@@ -7,7 +7,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "dibusb.h"
diff --git a/drivers/media/usb/dvb-usb/vp702x-fe.c b/drivers/media/usb/dvb-usb/vp702x-fe.c
index 7ff31baa3682..ae48146e005c 100644
--- a/drivers/media/usb/dvb-usb/vp702x-fe.c
+++ b/drivers/media/usb/dvb-usb/vp702x-fe.c
@@ -15,7 +15,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*
*/
#include "vp702x.h"
diff --git a/drivers/media/usb/dvb-usb/vp702x.c b/drivers/media/usb/dvb-usb/vp702x.c
index 40de33de90a7..c3529ea59da9 100644
--- a/drivers/media/usb/dvb-usb/vp702x.c
+++ b/drivers/media/usb/dvb-usb/vp702x.c
@@ -12,7 +12,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "vp702x.h"
#include <linux/mutex.h>
diff --git a/drivers/media/usb/dvb-usb/vp7045-fe.c b/drivers/media/usb/dvb-usb/vp7045-fe.c
index 4520ad9c2014..f86040173b8d 100644
--- a/drivers/media/usb/dvb-usb/vp7045-fe.c
+++ b/drivers/media/usb/dvb-usb/vp7045-fe.c
@@ -9,7 +9,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*
*/
#include "vp7045.h"
diff --git a/drivers/media/usb/dvb-usb/vp7045.c b/drivers/media/usb/dvb-usb/vp7045.c
index 2527b88beb87..e2c8a8530554 100644
--- a/drivers/media/usb/dvb-usb/vp7045.c
+++ b/drivers/media/usb/dvb-usb/vp7045.c
@@ -10,7 +10,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#include "vp7045.h"
diff --git a/drivers/media/usb/dvb-usb/vp7045.h b/drivers/media/usb/dvb-usb/vp7045.h
index 66499932ca76..2fdafd8f8cd6 100644
--- a/drivers/media/usb/dvb-usb/vp7045.h
+++ b/drivers/media/usb/dvb-usb/vp7045.h
@@ -9,7 +9,7 @@
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
- * see Documentation/dvb/README.dvb-usb for more information
+ * see Documentation/media/dvb-drivers/dvb-usb.rst for more information
*/
#ifndef _DVB_USB_VP7045_H_
#define _DVB_USB_VP7045_H_
diff --git a/drivers/media/usb/gspca/m5602/Kconfig b/drivers/media/usb/gspca/m5602/Kconfig
index 5a69016ed75f..13a00399ced9 100644
--- a/drivers/media/usb/gspca/m5602/Kconfig
+++ b/drivers/media/usb/gspca/m5602/Kconfig
@@ -5,7 +5,5 @@ config USB_M5602
Say Y here if you want support for cameras based on the
ALi m5602 connected to various image sensors.
- See <file:Documentation/video4linux/m5602.txt> for more info.
-
To compile this driver as a module, choose M here: the
module will be called gspca_m5602.
diff --git a/drivers/media/usb/ttusb-dec/Kconfig b/drivers/media/usb/ttusb-dec/Kconfig
index 290254ab06db..b205903a3c61 100644
--- a/drivers/media/usb/ttusb-dec/Kconfig
+++ b/drivers/media/usb/ttusb-dec/Kconfig
@@ -12,9 +12,9 @@ config DVB_TTUSB_DEC
an external software decoder to watch TV on your computer.
This driver needs external firmware. Please use the commands
- "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2000t",
- "<kerneldir>/Documentation/dvb/get_dvb_firmware dec2540t",
- "<kerneldir>/Documentation/dvb/get_dvb_firmware dec3000s",
+ "<kerneldir>/scripts/get_dvb_firmware dec2000t",
+ "<kerneldir>/scripts/get_dvb_firmware dec2540t",
+ "<kerneldir>/scripts/get_dvb_firmware dec3000s",
download/extract them, and then copy them to /usr/lib/hotplug/firmware
or /lib/firmware (depending on configuration of firmware hotplug).
diff --git a/drivers/media/usb/zr364xx/Kconfig b/drivers/media/usb/zr364xx/Kconfig
index 0f585662881d..ac429bca70e8 100644
--- a/drivers/media/usb/zr364xx/Kconfig
+++ b/drivers/media/usb/zr364xx/Kconfig
@@ -6,7 +6,7 @@ config USB_ZR364XX
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
- See <file:Documentation/video4linux/zr364xx.txt> for more info
+ See <file:Documentation/media/v4l-drivers/zr364xx.rst> for more info
and list of supported cameras.
To compile this driver as a module, choose M here: the
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 14d287bed33c..1ab613eb5796 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -33,7 +33,7 @@ config E100
to identify the adapter.
More specific information on configuring the driver is in
- <file:Documentation/networking/e100.txt>.
+ <file:Documentation/networking/e100.rst>.
To compile this driver as a module, choose M here. The module
will be called e100.
@@ -49,7 +49,7 @@ config E1000
<http://support.intel.com>
More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
+ <file:Documentation/networking/e1000.rst>.
To compile this driver as a module, choose M here. The module
will be called e1000.
@@ -94,7 +94,7 @@ config IGB
<http://support.intel.com>
More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
+ <file:Documentation/networking/e1000.rst>.
To compile this driver as a module, choose M here. The module
will be called igb.
@@ -130,7 +130,7 @@ config IGBVF
<http://support.intel.com>
More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
+ <file:Documentation/networking/e1000.rst>.
To compile this driver as a module, choose M here. The module
will be called igbvf.
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 44333bd8f908..a97f4eada60b 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -20,7 +20,7 @@ menuconfig PARPORT
drive, PLIP link (Parallel Line Internet Protocol is mainly used to
create a mini network by connecting the parallel ports of two local
machines) etc., then you need to say Y here; please read
- <file:Documentation/parport.txt> and
+ <file:Documentation/admin-guide/parport.rst> and
<file:drivers/parport/BUGS-parport>.
For extensive information about drivers for many devices attaching
@@ -33,7 +33,7 @@ menuconfig PARPORT
the module will be called parport.
If you have more than one parallel port and want to specify which
port and IRQ to be used by this driver at module load time, take a
- look at <file:Documentation/parport.txt>.
+ look at <file:Documentation/admin-guide/parport.rst>.
If unsure, say Y.
@@ -71,7 +71,7 @@ config PARPORT_PC_FIFO
As well as actually having a FIFO, or DMA capability, the kernel
will need to know which IRQ the parallel port has. By default,
parallel port interrupts will not be used, and so neither will the
- FIFO. See <file:Documentation/parport.txt> to find out how to
+ FIFO. See <file:Documentation/admin-guide/parport.rst> to find out how to
specify which IRQ/DMA to use.
config PARPORT_PC_SUPERIO
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index f27cb186437d..ac4d48830415 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1052,7 +1052,7 @@ config SAMSUNG_LAPTOP
function keys, wireless LED, LCD backlight level.
It may also provide some sysfs files described in
- <file:Documentation/ABI/testing/sysfs-platform-samsung-laptop>
+ <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop>
To compile this driver as a module, choose M here: the module
will be called samsung-laptop.
diff --git a/drivers/sbus/char/oradax.c b/drivers/sbus/char/oradax.c
index 1754f55e2fac..524f9ea62e52 100644
--- a/drivers/sbus/char/oradax.c
+++ b/drivers/sbus/char/oradax.c
@@ -30,7 +30,7 @@
* the recommended way for applications to use the coprocessor, and
* the driver interface is not intended for general use.
*
- * See Documentation/sparc/oradax/oracle_dax.txt for more details.
+ * See Documentation/sparc/oradax/oracle-dax.txt for more details.
*/
#include <linux/uaccess.h>
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index 8974a0fcda1b..4b5e250e8615 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -1291,7 +1291,7 @@ restore_params:
*
* @stream: Soundwire stream
*
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_prepare_stream(struct sdw_stream_runtime *stream)
{
@@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_enable_stream(struct sdw_stream_runtime *stream)
{
@@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_disable_stream(struct sdw_stream_runtime *stream)
{
@@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
- * Documentation/soundwire/stream.txt explains this API in detail
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
{
diff --git a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
index 0ba6771654f7..72ba9da3d179 100644
--- a/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
+++ b/drivers/staging/fsl-mc/bus/dpio/dpio-driver.txt
@@ -11,7 +11,7 @@ pool management for network interfaces.
This document provides an overview the Linux DPIO driver, its
subcomponents, and its APIs.
-See Documentation/dpaa2/overview.txt for a general overview of DPAA2
+See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2
and the general DPAA2 driver architecture in Linux.
Driver Overview
diff --git a/drivers/staging/media/bcm2048/TODO b/drivers/staging/media/bcm2048/TODO
index 051f85dbe89e..6bee2a2dad68 100644
--- a/drivers/staging/media/bcm2048/TODO
+++ b/drivers/staging/media/bcm2048/TODO
@@ -3,7 +3,7 @@ TODO:
From the initial code review:
The main thing you need to do is to implement all the controls using the
-control framework (see Documentation/video4linux/v4l2-controls.txt).
+control framework (see Documentation/media/kapi/v4l2-controls.rst).
Most drivers are by now converted to the control framework, so you will
find many examples of how to do this in drivers/media/radio.
diff --git a/drivers/staging/media/zoran/Kconfig b/drivers/staging/media/zoran/Kconfig
index 63df5de5068d..34a18135ede0 100644
--- a/drivers/staging/media/zoran/Kconfig
+++ b/drivers/staging/media/zoran/Kconfig
@@ -7,7 +7,7 @@ config VIDEO_ZORAN
36057/36067 PCI controller chipset. This includes the Iomega
Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
- more information, check <file:Documentation/video4linux/Zoran>.
+ more information, check <file:Documentation/media/v4l-drivers/zoran.rst>.
To compile this driver as a module, choose M here: the
module will be called zr36067.
diff --git a/drivers/video/fbdev/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index 7f4e908330bf..812a36cb60c3 100644
--- a/drivers/video/fbdev/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
@@ -836,7 +836,7 @@ static void xxxfb_remove(struct pci_dev *dev)
* @dev: PCI device
* @msg: the suspend event code.
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
{
@@ -851,7 +851,7 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
* xxxfb_resume - Optional but recommended function. Resume the device.
* @dev: PCI device
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_resume(struct pci_dev *dev)
{
@@ -915,7 +915,7 @@ static void __exit xxxfb_exit(void)
* @dev: platform device
* @msg: the suspend event code.
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
{
@@ -930,7 +930,7 @@ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
* xxxfb_resume - Optional but recommended function. Resume the device.
* @dev: platform device
*
- * See Documentation/power/admin-guide/devices.rst for more information
+ * See Documentation/driver-api/pm/devices.rst for more information
*/
static int xxxfb_resume(struct platform_dev *dev)
{
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 57a27c42b5ac..56df483de619 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -168,7 +168,7 @@ config BINFMT_MISC
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
- <file:Documentation/binfmt_misc.txt> to learn how to use this
+ <file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
feature, <file:Documentation/admin-guide/java.rst> for information about how
to include Java support. and <file:Documentation/admin-guide/mono.rst> for
information about how to include Mono-based .NET support.
diff --git a/fs/befs/ChangeLog b/fs/befs/ChangeLog
index 16f2dfe8c2f7..aff7eec8f327 100644
--- a/fs/befs/ChangeLog
+++ b/fs/befs/ChangeLog
@@ -389,7 +389,7 @@ Version 0.4 (2001-10-28)
(fs/nls/Config.in)
* Added Configure.help entries for CONFIG_BEFS_FS and CONFIG_DEBUG_BEFS
- (Documentation/Configure.help)
+ (currently at fs/befs/Kconfig)
2001-08-??
==========
diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 4de191563261..4b5fff31ef27 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -4,7 +4,7 @@
* Copyright (C) 1997 Richard Günther
*
* binfmt_misc detects binaries via a magic or filename extension and invokes
- * a specified wrapper. See Documentation/binfmt_misc.txt for more details.
+ * a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/fs/orangefs/orangefs-sysfs.c b/fs/orangefs/orangefs-sysfs.c
index 079a465796f3..dd28079f518c 100644
--- a/fs/orangefs/orangefs-sysfs.c
+++ b/fs/orangefs/orangefs-sysfs.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Documentation/ABI/stable/orangefs-sysfs:
+ * Documentation/ABI/stable/sysfs-fs-orangefs:
*
* What: /sys/fs/orangefs/perf_counter_reset
* Date: June 2015
diff --git a/include/keys/asymmetric-subtype.h b/include/keys/asymmetric-subtype.h
index 2480469ce8fb..e0a9c2368872 100644
--- a/include/keys/asymmetric-subtype.h
+++ b/include/keys/asymmetric-subtype.h
@@ -1,6 +1,6 @@
/* Asymmetric public-key cryptography key subtype
*
- * See Documentation/security/asymmetric-keys.txt
+ * See Documentation/crypto/asymmetric-keys.txt
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
diff --git a/include/keys/asymmetric-type.h b/include/keys/asymmetric-type.h
index b38240716d41..1cb77cd5135e 100644
--- a/include/keys/asymmetric-type.h
+++ b/include/keys/asymmetric-type.h
@@ -1,6 +1,6 @@
/* Asymmetric Public-key cryptography key type interface
*
- * See Documentation/security/asymmetric-keys.txt
+ * See Documentation/crypto/asymmetric-keys.txt
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
diff --git a/include/linux/assoc_array.h b/include/linux/assoc_array.h
index a89df3be1686..65e3832f96b2 100644
--- a/include/linux/assoc_array.h
+++ b/include/linux/assoc_array.h
@@ -1,6 +1,6 @@
/* Generic associative array implementation.
*
- * See Documentation/assoc_array.txt for information.
+ * See Documentation/core-api/assoc_array.rst for information.
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
diff --git a/include/linux/assoc_array_priv.h b/include/linux/assoc_array_priv.h
index 711275e6681c..a00a06550c10 100644
--- a/include/linux/assoc_array_priv.h
+++ b/include/linux/assoc_array_priv.h
@@ -1,6 +1,6 @@
/* Private definitions for the generic associative array implementation.
*
- * See Documentation/assoc_array.txt for information.
+ * See Documentation/core-api/assoc_array.rst for information.
*
* Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
diff --git a/include/linux/circ_buf.h b/include/linux/circ_buf.h
index 7cf262a421c3..b3233e8202f9 100644
--- a/include/linux/circ_buf.h
+++ b/include/linux/circ_buf.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * See Documentation/circular-buffers.txt for more information.
+ * See Documentation/core-api/circular-buffers.rst for more information.
*/
#ifndef _LINUX_CIRC_BUF_H
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 9c3c9a319e48..8154f4920fcb 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Ftrace header. For implementation details beyond the random comments
- * scattered below, see: Documentation/trace/ftrace-design.txt
+ * scattered below, see: Documentation/trace/ftrace-design.rst
*/
#ifndef _LINUX_FTRACE_H
diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h
index 997b06634152..18602cab7799 100644
--- a/include/linux/platform_data/sc18is602.h
+++ b/include/linux/platform_data/sc18is602.h
@@ -7,7 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * For further information, see the Documentation/spi/sc18is602 file.
+ * For further information, see the Documentation/spi/spi-sc18is602 file.
*/
/**
diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h
index e4b257ff881b..bc8206a8f30e 100644
--- a/include/linux/rculist_nulls.h
+++ b/include/linux/rculist_nulls.h
@@ -109,7 +109,7 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
*
* The barrier() is needed to make sure compiler doesn't cache first element [1],
* as this loop can be restarted [2]
- * [1] Documentation/atomic_ops.txt around line 114
+ * [1] Documentation/core-api/atomic_ops.rst around line 114
* [2] Documentation/RCU/rculist_nulls.txt around line 146
*/
#define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index c94f466d57ef..19a690b559ca 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -4,7 +4,7 @@
/*
* Kernel Tracepoint API.
*
- * See Documentation/trace/tracepoints.txt.
+ * See Documentation/trace/tracepoints.rst.
*
* Copyright (C) 2008-2014 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
*
diff --git a/include/uapi/linux/prctl.h b/include/uapi/linux/prctl.h
index db9f15f5db04..c0d7ea0bf5b6 100644
--- a/include/uapi/linux/prctl.h
+++ b/include/uapi/linux/prctl.h
@@ -170,7 +170,7 @@ struct prctl_mm_map {
* asking selinux for a specific new context (e.g. with runcon) will result
* in execve returning -EPERM.
*
- * See Documentation/prctl/no_new_privs.txt for more details.
+ * See Documentation/userspace-api/no_new_privs.rst for more details.
*/
#define PR_SET_NO_NEW_PRIVS 38
#define PR_GET_NO_NEW_PRIVS 39
diff --git a/include/xen/interface/io/kbdif.h b/include/xen/interface/io/kbdif.h
index 2a9510ade701..e2340a4130cf 100644
--- a/include/xen/interface/io/kbdif.h
+++ b/include/xen/interface/io/kbdif.h
@@ -317,7 +317,7 @@ struct xenkbd_position {
* Linux [2] and Windows [3] multi-touch support.
*
* [1] https://cgit.freedesktop.org/wayland/wayland/tree/protocol/wayland.xml
- * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.txt
+ * [2] https://www.kernel.org/doc/Documentation/input/multi-touch-protocol.rst
* [3] https://msdn.microsoft.com/en-us/library/jj151564(v=vs.85).aspx
*
*
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index d8b12e0d39cd..266f10cb7222 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -605,7 +605,7 @@ static inline int nr_cpusets(void)
* load balancing domains (sched domains) as specified by that partial
* partition.
*
- * See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt
+ * See "What is sched_load_balance" in Documentation/cgroup-v1/cpusets.txt
* for a background explanation of this.
*
* Does not return errors, on the theory that the callers of this
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 705c2366dafe..d9706da10930 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -455,8 +455,9 @@ struct kobject *power_kobj;
* state - control system sleep states.
*
* show() returns available sleep state labels, which may be "mem", "standby",
- * "freeze" and "disk" (hibernation). See Documentation/power/states.txt for a
- * description of what they mean.
+ * "freeze" and "disk" (hibernation).
+ * See Documentation/admin-guide/pm/sleep-states.rst for a description of
+ * what they mean.
*
* store() accepts one of those strings, translates it into the proper
* enumerated value, and initiates a suspend transition.
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index dd6c0a2ad969..dcc0166d1997 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -12,22 +12,22 @@ config NOP_TRACER
config HAVE_FTRACE_NMI_ENTER
bool
help
- See Documentation/trace/ftrace-design.txt
+ See Documentation/trace/ftrace-design.rst
config HAVE_FUNCTION_TRACER
bool
help
- See Documentation/trace/ftrace-design.txt
+ See Documentation/trace/ftrace-design.rst
config HAVE_FUNCTION_GRAPH_TRACER
bool
help
- See Documentation/trace/ftrace-design.txt
+ See Documentation/trace/ftrace-design.rst
config HAVE_DYNAMIC_FTRACE
bool
help
- See Documentation/trace/ftrace-design.txt
+ See Documentation/trace/ftrace-design.rst
config HAVE_DYNAMIC_FTRACE_WITH_REGS
bool
@@ -35,12 +35,12 @@ config HAVE_DYNAMIC_FTRACE_WITH_REGS
config HAVE_FTRACE_MCOUNT_RECORD
bool
help
- See Documentation/trace/ftrace-design.txt
+ See Documentation/trace/ftrace-design.rst
config HAVE_SYSCALL_TRACEPOINTS
bool
help
- See Documentation/trace/ftrace-design.txt
+ See Documentation/trace/ftrace-design.rst
config HAVE_FENTRY
bool
@@ -448,7 +448,7 @@ config KPROBE_EVENTS
help
This allows the user to add tracing events (similar to tracepoints)
on the fly via the ftrace interface. See
- Documentation/trace/kprobetrace.txt for more details.
+ Documentation/trace/kprobetrace.rst for more details.
Those events can be inserted wherever kprobes can probe, and record
various register and memory values.
@@ -575,7 +575,7 @@ config MMIOTRACE
implementation and works via page faults. Tracing is disabled by
default and can be enabled at run-time.
- See Documentation/trace/mmiotrace.txt.
+ See Documentation/trace/mmiotrace.rst.
If you are not helping to develop drivers, say N.
config TRACING_MAP
diff --git a/lib/Kconfig b/lib/Kconfig
index 809fdd155739..e34b04b56057 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -405,7 +405,7 @@ config ASSOCIATIVE_ARRAY
See:
- Documentation/assoc_array.txt
+ Documentation/core-api/assoc_array.rst
for more information.
diff --git a/scripts/documentation-file-ref-check b/scripts/documentation-file-ref-check
index 2520bc14ffac..078999a3fdff 100755
--- a/scripts/documentation-file-ref-check
+++ b/scripts/documentation-file-ref-check
@@ -21,7 +21,7 @@ GetOptions(
);
if ($help != 0) {
- print "$scriptname [--help] [--fix-rst]\n";
+ print "$scriptname [--help] [--fix]\n";
exit -1;
}
@@ -38,16 +38,31 @@ while (<IN>) {
my $f = $1;
my $ln = $2;
- # Makefiles contain nasty expressions to parse docs
- next if ($f =~ m/Makefile/);
+ # Makefiles and scripts contain nasty expressions to parse docs
+ next if ($f =~ m/Makefile/ || $f =~ m/\.sh$/);
+
# Skip this script
next if ($f eq $scriptname);
- if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*+-]*),) {
+ if ($ln =~ m,\b(\S*)(Documentation/[A-Za-z0-9\_\.\,\~/\*\[\]\?+-]*)(.*),) {
my $prefix = $1;
my $ref = $2;
my $base = $2;
+ my $extra = $3;
+
+ # some file references are like:
+ # /usr/src/linux/Documentation/DMA-{API,mapping}.txt
+ # For now, ignore them
+ next if ($extra =~ m/^{/);
+
+ # Remove footnotes at the end like:
+ # Documentation/devicetree/dt-object-internal.txt[1]
+ $ref =~ s/(txt|rst)\[\d+]$/$1/;
+
+ # Remove ending ']' without any '['
+ $ref =~ s/\].*// if (!($ref =~ m/\[/));
+ # Remove puntuation marks at the end
$ref =~ s/[\,\.]+$//;
my $fulref = "$prefix$ref";
@@ -63,8 +78,15 @@ while (<IN>) {
# Check if exists, evaluating wildcards
next if (grep -e, glob("$ref $fulref"));
+ # Accept relative Documentation patches for tools/
+ if ($f =~ m/tools/) {
+ my $path = $f;
+ $path =~ s,(.*)/.*,$1,;
+ next if (grep -e, glob("$path/$ref $path/$fulref"));
+ }
+
if ($fix) {
- if (!($ref =~ m/(devicetree|scripts|Kconfig|Kbuild)/)) {
+ if (!($ref =~ m/(scripts|Kconfig|Kbuild)/)) {
$broken_ref{$ref}++;
}
} else {
@@ -84,10 +106,19 @@ foreach my $ref (keys %broken_ref) {
# get just the basename
$new =~ s,.*/,,;
- # Seek for the same name on another place, as it may have been moved
my $f="";
- $f = qx(find . -iname $new) if ($new);
+ # usual reason for breakage: DT file moved around
+ if ($ref =~ /devicetree/) {
+ my $search = $new;
+ $search =~ s,^.*/,,;
+ $f = qx(find Documentation/devicetree/ -iname "*$search*") if ($search);
+ if (!$f) {
+ # Manufacturer name may have changed
+ $search =~ s/^.*,//;
+ $f = qx(find Documentation/devicetree/ -iname "*$search*") if ($search);
+ }
+ }
# usual reason for breakage: file renamed to .rst
if (!$f) {
@@ -95,6 +126,17 @@ foreach my $ref (keys %broken_ref) {
$f=qx(find . -iname $new) if ($new);
}
+ # usual reason for breakage: use dash or underline
+ if (!$f) {
+ $new =~ s/[-_]/[-_]/g;
+ $f=qx(find . -iname $new) if ($new);
+ }
+
+ # Wild guess: seek for the same name on another place
+ if (!$f) {
+ $f = qx(find . -iname $new) if ($new);
+ }
+
my @find = split /\s+/, $f;
if (!$f) {
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index c65b39bafdfe..cd97929fac66 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent)
* This is one of the three key functions for hierarchy implementation.
* This function is responsible for re-evaluating all the cgroup's active
* exceptions due to a parent's exception change.
- * Refer to Documentation/cgroups/devices.txt for more details.
+ * Refer to Documentation/cgroup-v1/devices.txt for more details.
*/
static void revalidate_active_exceptions(struct dev_cgroup *devcg)
{
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 9a46dc24ac10..2b5ee5fbd652 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -4728,7 +4728,7 @@ err_af:
}
/* This supports connect(2) and SCTP connect services such as sctp_connectx(3)
- * and sctp_sendmsg(3) as described in Documentation/security/LSM-sctp.txt
+ * and sctp_sendmsg(3) as described in Documentation/security/LSM-sctp.rst
*/
static int selinux_socket_connect_helper(struct socket *sock,
struct sockaddr *address, int addrlen)
diff --git a/sound/core/Kconfig b/sound/core/Kconfig
index 6e937a8146a1..63b3ef9c83f5 100644
--- a/sound/core/Kconfig
+++ b/sound/core/Kconfig
@@ -48,7 +48,7 @@ config SND_MIXER_OSS
depends on SND_OSSEMUL
help
To enable OSS mixer API emulation (/dev/mixer*), say Y here
- and read <file:Documentation/sound/alsa/OSS-Emulation.txt>.
+ and read <file:Documentation/sound/designs/oss-emulation.rst>.
Many programs still use the OSS API, so say Y.
@@ -61,7 +61,7 @@ config SND_PCM_OSS
select SND_PCM
help
To enable OSS digital audio (PCM) emulation (/dev/dsp*), say Y
- here and read <file:Documentation/sound/alsa/OSS-Emulation.txt>.
+ here and read <file:Documentation/sound/designs/oss-emulation.rst>.
Many programs still use the OSS API, so say Y.
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 7144cc36e8ae..648a12da44f9 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -153,7 +153,7 @@ config SND_SERIAL_U16550
select SND_RAWMIDI
help
To include support for MIDI serial port interfaces, say Y here
- and read <file:Documentation/sound/alsa/serial-u16550.txt>.
+ and read <file:Documentation/sound/cards/serial-u16550.rst>.
This driver works with serial UARTs 16550 and better.
This driver accesses the serial port hardware directly, so
@@ -223,7 +223,7 @@ config SND_AC97_POWER_SAVE
the device frequently. A value of 10 seconds would be a
good choice for normal operations.
- See Documentation/sound/alsa/powersave.txt for more details.
+ See Documentation/sound/designs/powersave.rst for more details.
config SND_AC97_POWER_SAVE_DEFAULT
int "Default time-out for AC97 power-save mode"
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index d9f3fdb777e4..4105d9f653d9 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -175,7 +175,7 @@ config SND_BT87X
help
If you want to record audio from TV cards based on
Brooktree Bt878/Bt879 chips, say Y here and read
- <file:Documentation/sound/alsa/Bt87x.txt>.
+ <file:Documentation/sound/cards/bt87x.rst>.
To compile this driver as a module, choose M here: the module
will be called snd-bt87x.
@@ -210,7 +210,7 @@ config SND_CMIPCI
help
If you want to use soundcards based on C-Media CMI8338, CMI8738,
CMI8768 or CMI8770 chips, say Y here and read
- <file:Documentation/sound/alsa/CMIPCI.txt>.
+ <file:Documentation/sound/cards/cmipci.rst>.
To compile this driver as a module, choose M here: the module
will be called snd-cmipci.
@@ -472,8 +472,8 @@ config SND_EMU10K1
Audigy and E-mu APS (partially supported) soundcards.
The confusing multitude of mixer controls is documented in
- <file:Documentation/sound/alsa/SB-Live-mixer.txt> and
- <file:Documentation/sound/alsa/Audigy-mixer.txt>.
+ <file:Documentation/sound/cards/sb-live-mixer.rst> and
+ <file:Documentation/sound/cards/audigy-mixer.rst>.
To compile this driver as a module, choose M here: the module
will be called snd-emu10k1.
@@ -735,7 +735,7 @@ config SND_MIXART
select SND_PCM
help
If you want to use Digigram miXart soundcards, say Y here and
- read <file:Documentation/sound/alsa/MIXART.txt>.
+ read <file:Documentation/sound/cards/mixart.rst>.
To compile this driver as a module, choose M here: the module
will be called snd-mixart.
diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h
index db9f15f5db04..c0d7ea0bf5b6 100644
--- a/tools/include/uapi/linux/prctl.h
+++ b/tools/include/uapi/linux/prctl.h
@@ -170,7 +170,7 @@ struct prctl_mm_map {
* asking selinux for a specific new context (e.g. with runcon) will result
* in execve returning -EPERM.
*
- * See Documentation/prctl/no_new_privs.txt for more details.
+ * See Documentation/userspace-api/no_new_privs.rst for more details.
*/
#define PR_SET_NO_NEW_PRIVS 38
#define PR_GET_NO_NEW_PRIVS 39
diff --git a/tools/lib/api/fs/fs.c b/tools/lib/api/fs/fs.c
index 6a12bbf39f7b..7aba8243a0e7 100644
--- a/tools/lib/api/fs/fs.c
+++ b/tools/lib/api/fs/fs.c
@@ -201,7 +201,7 @@ static void mem_toupper(char *f, size_t len)
/*
* Check for "NAME_PATH" environment variable to override fs location (for
- * testing). This matches the recommendation in Documentation/sysfs-rules.txt
+ * testing). This matches the recommendation in Documentation/admin-guide/sysfs-rules.rst
* for SYSFS_PATH.
*/
static bool fs__env_override(struct fs *fs)
diff --git a/tools/perf/util/bpf-prologue.c b/tools/perf/util/bpf-prologue.c
index 29347756b0af..77e4891e17b0 100644
--- a/tools/perf/util/bpf-prologue.c
+++ b/tools/perf/util/bpf-prologue.c
@@ -61,7 +61,7 @@ check_pos(struct bpf_insn_pos *pos)
/*
* Convert type string (u8/u16/u32/u64/s8/s16/s32/s64 ..., see
- * Documentation/trace/kprobetrace.txt) to size field of BPF_LDX_MEM
+ * Documentation/trace/kprobetrace.rst) to size field of BPF_LDX_MEM
* instruction (BPF_{B,H,W,DW}).
*/
static int
diff --git a/tools/power/pm-graph/config/custom-timeline-functions.cfg b/tools/power/pm-graph/config/custom-timeline-functions.cfg
index 4f80ad7d7275..f8fcb06fd68b 100644
--- a/tools/power/pm-graph/config/custom-timeline-functions.cfg
+++ b/tools/power/pm-graph/config/custom-timeline-functions.cfg
@@ -105,7 +105,7 @@ override-dev-timeline-functions: true
# example: [color=#CC00CC]
#
# arglist: A list of arguments from registers/stack addresses. See URL:
-# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst
#
# example: cpu=%di:s32
#
@@ -170,7 +170,7 @@ pm_restore_console:
# example: [color=#CC00CC]
#
# arglist: A list of arguments from registers/stack addresses. See URL:
-# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt
+# https://www.kernel.org/doc/Documentation/trace/kprobetrace.rst
#
# example: port=+36(%di):s32
#