diff options
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index 0d6c5ed44795..2809d0ccb1a7 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -17,6 +17,7 @@ #include <drm/drm_encoder.h> #include <drm/drm_modes.h> #include <drm/drm_of.h> +#include <drm/drm_panel.h> #include <uapi/drm/drm_mode.h> @@ -343,6 +344,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon, static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, const struct drm_display_mode *mode) { + struct drm_panel *panel = tcon->panel; + struct drm_connector *connector = panel->connector; + struct drm_display_info display_info = connector->display_info; unsigned int bp, hsync, vsync; u8 clk_delay; u32 val = 0; @@ -400,6 +404,27 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (mode->flags & DRM_MODE_FLAG_PVSYNC) val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; + /* + * On A20 and similar SoCs, the only way to achieve Positive Edge + * (Rising Edge), is setting dclk clock phase to 2/3(240°). + * By default TCON works in Negative Edge(Falling Edge), + * this is why phase is set to 0 in that case. + * Unfortunately there's no way to logically invert dclk through + * IO_POL register. + * The only acceptable way to work, triple checked with scope, + * is using clock phase set to 0° for Negative Edge and set to 240° + * for Positive Edge. + * On A33 and similar SoCs there would be a 90° phase option, + * but it divides also dclk by 2. + * Following code is a way to avoid quirks all around TCON + * and DOTCLOCK drivers. + */ + if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE) + clk_set_phase(tcon->dclk, 240); + + if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) + clk_set_phase(tcon->dclk, 0); + regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE, val); |