diff options
| -rw-r--r-- | Documentation/hwmon/max31785 | 51 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/pmbus/max31785.c | 116 |
4 files changed, 178 insertions, 0 deletions
diff --git a/Documentation/hwmon/max31785 b/Documentation/hwmon/max31785 new file mode 100644 index 000000000000..45fb6093dec2 --- /dev/null +++ b/Documentation/hwmon/max31785 @@ -0,0 +1,51 @@ +Kernel driver max31785 +====================== + +Supported chips: + * Maxim MAX31785, MAX31785A + Prefix: 'max31785' or 'max31785a' + Addresses scanned: - + Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +Author: Andrew Jeffery <andrew@aj.id.au> + +Description +----------- + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +For dual rotor fan configuration, the MAX31785 exposes the slowest rotor of the +two in the fan[1-4]_input attributes. + +Usage Notes +----------- + +This driver does not probe for PMBus devices. You will have to instantiate +devices explicitly. + +Sysfs attributes +---------------- + +fan[1-4]_alarm Fan alarm. +fan[1-4]_fault Fan fault. +fan[1-4]_input Fan RPM. + +in[1-6]_crit Critical maximum output voltage +in[1-6]_crit_alarm Output voltage critical high alarm +in[1-6]_input Measured output voltage +in[1-6]_label "vout[18-23]" +in[1-6]_lcrit Critical minimum output voltage +in[1-6]_lcrit_alarm Output voltage critical low alarm +in[1-6]_max Maximum output voltage +in[1-6]_max_alarm Output voltage high alarm +in[1-6]_min Minimum output voltage +in[1-6]_min_alarm Output voltage low alarm + +temp[1-11]_crit Critical high temperature +temp[1-11]_crit_alarm Chip temperature critical high alarm +temp[1-11]_input Measured temperature +temp[1-11]_max Maximum temperature +temp[1-11]_max_alarm Chip temperature high alarm diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 40019325b517..08479006c7f9 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -114,6 +114,16 @@ config SENSORS_MAX20751 This driver can also be built as a module. If so, the module will be called max20751. +config SENSORS_MAX31785 + tristate "Maxim MAX31785 and compatibles" + default n + help + If you say yes here you get hardware monitoring support for Maxim + MAX31785. + + This driver can also be built as a module. If so, the module will + be called max31785. + config SENSORS_MAX34440 tristate "Maxim MAX34440 and compatibles" default n diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile index 459a6be3390e..a8bf0e490db9 100644 --- a/drivers/hwmon/pmbus/Makefile +++ b/drivers/hwmon/pmbus/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SENSORS_LTC2978) += ltc2978.o obj-$(CONFIG_SENSORS_LTC3815) += ltc3815.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX20751) += max20751.o +obj-$(CONFIG_SENSORS_MAX31785) += max31785.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c new file mode 100644 index 000000000000..9313849d5160 --- /dev/null +++ b/drivers/hwmon/pmbus/max31785.c @@ -0,0 +1,116 @@ +/* + * Copyright (C) 2017 IBM Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/i2c.h> +#include "pmbus.h" + +enum max31785_regs { + MFR_REVISION = 0x9b, +}; + +#define MAX31785_NR_PAGES 23 + +#define MAX31785_FAN_FUNCS \ + (PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12) + +#define MAX31785_TEMP_FUNCS \ + (PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP) + +#define MAX31785_VOUT_FUNCS \ + (PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT) + +static const struct pmbus_driver_info max31785_info = { + .pages = MAX31785_NR_PAGES, + + /* RPM */ + .format[PSC_FAN] = direct, + .m[PSC_FAN] = 1, + .b[PSC_FAN] = 0, + .R[PSC_FAN] = 0, + .func[0] = MAX31785_FAN_FUNCS, + .func[1] = MAX31785_FAN_FUNCS, + .func[2] = MAX31785_FAN_FUNCS, + .func[3] = MAX31785_FAN_FUNCS, + .func[4] = MAX31785_FAN_FUNCS, + .func[5] = MAX31785_FAN_FUNCS, + + .format[PSC_TEMPERATURE] = direct, + .m[PSC_TEMPERATURE] = 1, + .b[PSC_TEMPERATURE] = 0, + .R[PSC_TEMPERATURE] = 2, + .func[6] = MAX31785_TEMP_FUNCS, + .func[7] = MAX31785_TEMP_FUNCS, + .func[8] = MAX31785_TEMP_FUNCS, + .func[9] = MAX31785_TEMP_FUNCS, + .func[10] = MAX31785_TEMP_FUNCS, + .func[11] = MAX31785_TEMP_FUNCS, + .func[12] = MAX31785_TEMP_FUNCS, + .func[13] = MAX31785_TEMP_FUNCS, + .func[14] = MAX31785_TEMP_FUNCS, + .func[15] = MAX31785_TEMP_FUNCS, + .func[16] = MAX31785_TEMP_FUNCS, + + .format[PSC_VOLTAGE_OUT] = direct, + .m[PSC_VOLTAGE_OUT] = 1, + .b[PSC_VOLTAGE_OUT] = 0, + .R[PSC_VOLTAGE_OUT] = 0, + .func[17] = MAX31785_VOUT_FUNCS, + .func[18] = MAX31785_VOUT_FUNCS, + .func[19] = MAX31785_VOUT_FUNCS, + .func[20] = MAX31785_VOUT_FUNCS, + .func[21] = MAX31785_VOUT_FUNCS, + .func[22] = MAX31785_VOUT_FUNCS, +}; + +static int max31785_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct pmbus_driver_info *info; + s64 ret; + + info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + *info = max31785_info; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 255); + if (ret < 0) + return ret; + + return pmbus_do_probe(client, id, info); +} + +static const struct i2c_device_id max31785_id[] = { + { "max31785", 0 }, + { "max31785a", 0 }, + { }, +}; + +MODULE_DEVICE_TABLE(i2c, max31785_id); + +static struct i2c_driver max31785_driver = { + .driver = { + .name = "max31785", + }, + .probe = max31785_probe, + .remove = pmbus_do_remove, + .id_table = max31785_id, +}; + +module_i2c_driver(max31785_driver); + +MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>"); +MODULE_DESCRIPTION("PMBus driver for the Maxim MAX31785"); +MODULE_LICENSE("GPL"); |