summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/serial/atmel-usart.txt12
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt33
-rw-r--r--Documentation/devicetree/bindings/serial/of-serial.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci-serial.txt1
-rw-r--r--Documentation/kernel-parameters.txt9
-rw-r--r--Documentation/serial/driver25
-rw-r--r--arch/arm/include/asm/dcc.h41
-rw-r--r--arch/arm/mach-at91/at91rm9200_devices.c16
-rw-r--r--arch/arm/mach-at91/at91sam9260_devices.c7
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c4
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c4
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c5
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c5
-rw-r--r--arch/arm/mach-at91/gpio.c13
-rw-r--r--arch/arm64/Kconfig3
-rw-r--r--arch/arm64/Kconfig.debug9
-rw-r--r--arch/arm64/kernel/Makefile1
-rw-r--r--arch/arm64/kernel/early_printk.c156
-rw-r--r--arch/x86/Kconfig3
-rw-r--r--drivers/bluetooth/hci_ldisc.c24
-rw-r--r--drivers/bluetooth/hci_uart.h1
-rw-r--r--drivers/parport/parport_serial.c9
-rw-r--r--drivers/tty/hvc/hvc_console.c9
-rw-r--r--drivers/tty/hvc/hvc_dcc.c42
-rw-r--r--drivers/tty/n_hdlc.c8
-rw-r--r--drivers/tty/serial/8250/8250_core.c11
-rw-r--r--drivers/tty/serial/8250/8250_dma.c17
-rw-r--r--drivers/tty/serial/8250/8250_dw.c81
-rw-r--r--drivers/tty/serial/8250/8250_early.c138
-rw-r--r--drivers/tty/serial/8250/8250_pci.c19
-rw-r--r--drivers/tty/serial/8250/Kconfig6
-rw-r--r--drivers/tty/serial/Kconfig57
-rw-r--r--drivers/tty/serial/Makefile8
-rw-r--r--drivers/tty/serial/amba-pl011.c30
-rw-r--r--drivers/tty/serial/atmel_serial.c230
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c8
-rw-r--r--drivers/tty/serial/earlycon-arm-semihost.c61
-rw-r--r--drivers/tty/serial/earlycon.c144
-rw-r--r--drivers/tty/serial/efm32-uart.c1
-rw-r--r--drivers/tty/serial/imx.c39
-rw-r--r--drivers/tty/serial/kgdb_nmi.c59
-rw-r--r--drivers/tty/serial/men_z135_uart.c867
-rw-r--r--drivers/tty/serial/mux.c4
-rw-r--r--drivers/tty/serial/of_serial.c5
-rw-r--r--drivers/tty/serial/omap-serial.c94
-rw-r--r--drivers/tty/serial/pch_uart.c13
-rw-r--r--drivers/tty/serial/pxa.c5
-rw-r--r--drivers/tty/serial/samsung.c35
-rw-r--r--drivers/tty/serial/samsung.h23
-rw-r--r--drivers/tty/serial/sc16is7xx.c1277
-rw-r--r--drivers/tty/serial/sccnxp.c6
-rw-r--r--drivers/tty/serial/serial_core.c15
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.c143
-rw-r--r--drivers/tty/serial/serial_mctrl_gpio.h110
-rw-r--r--drivers/tty/serial/serial_txx9.c5
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c51
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h4
-rw-r--r--drivers/tty/serial/st-asc.c8
-rw-r--r--drivers/tty/serial/uartlite.c17
-rw-r--r--drivers/tty/serial/xilinx_uartps.c1129
-rw-r--r--drivers/tty/vt/consolemap.c54
-rw-r--r--drivers/tty/vt/vt.c89
-rw-r--r--drivers/video/console/vgacon.c17
-rw-r--r--include/linux/console_struct.h5
-rw-r--r--include/linux/platform_data/atmel.h1
-rw-r--r--include/linux/serial_core.h16
-rw-r--r--include/linux/tty_ldisc.h5
-rw-r--r--include/uapi/linux/serial_core.h8
-rw-r--r--include/uapi/linux/serial_reg.h2
-rw-r--r--kernel/printk/printk.c1
70 files changed, 4051 insertions, 1308 deletions
diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt
index 17c1042b2df8..a6391e70a8fd 100644
--- a/Documentation/devicetree/bindings/serial/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt
@@ -13,8 +13,9 @@ Required properties:
Optional properties:
- atmel,use-dma-rx: use of PDC or DMA for receiving data
- atmel,use-dma-tx: use of PDC or DMA for transmitting data
-- rts-gpios: specify a GPIO for RTS line. It will use specified PIO instead of the peripheral
- function pin for the USART RTS feature. If unsure, don't specify this property.
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
+ It will use specified PIO instead of the peripheral function pin for the USART feature.
+ If unsure, don't specify this property.
- add dma bindings for dma transfer:
- dmas: DMA specifier, consisting of a phandle to DMA controller node,
memory peripheral interface and USART DMA channel ID, FIFO configuration.
@@ -35,7 +36,12 @@ Example:
clock-names = "usart";
atmel,use-dma-rx;
atmel,use-dma-tx;
- rts-gpios = <&pioD 15 0>;
+ rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
};
- use DMA:
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
new file mode 100644
index 000000000000..246c795668dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -0,0 +1,33 @@
+* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+ - "nxp,sc16is740" for NXP SC16IS740,
+ - "nxp,sc16is741" for NXP SC16IS741,
+ - "nxp,sc16is750" for NXP SC16IS750,
+ - "nxp,sc16is752" for NXP SC16IS752,
+ - "nxp,sc16is760" for NXP SC16IS760,
+ - "nxp,sc16is762" for NXP SC16IS762.
+- reg: I2C address of the SC16IS7xx device.
+- interrupt-parent: The phandle for the interrupt controller that
+ services interrupts for this IC.
+- interrupts: Should contain the UART interrupt
+- clocks: Reference to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+ the second cell is used to specify the GPIO polarity:
+ 0 = active high,
+ 1 = active low.
+
+Example:
+ sc16is750: sc16is750@51 {
+ compatible = "nxp,sc16is750";
+ reg = <0x51>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt
index 1928a3e83cd0..77054772a8f4 100644
--- a/Documentation/devicetree/bindings/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/serial/of-serial.txt
@@ -37,6 +37,7 @@ Optional properties:
- auto-flow-control: one way to enable automatic flow control support. The
driver is allowed to detect support for the capability even without this
property.
+- has-hw-flow-control: the hardware has flow control capability.
Example:
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 53e6c175db6c..64fd7dec1bbc 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -4,6 +4,7 @@ Required properties:
- compatible: Must contain one of the following:
+ - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
- "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
- "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7da289ee0589..4ddcbf949699 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -883,6 +883,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
which are not unmapped.
earlycon= [KNL] Output early console device and options.
+
uart[8250],io,<addr>[,options]
uart[8250],mmio,<addr>[,options]
uart[8250],mmio32,<addr>[,options]
@@ -892,6 +893,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
(mmio) or 32-bit (mmio32).
The options are the same as for ttyS, above.
+ pl011,<addr>
+ Start an early, polled-mode console on a pl011 serial
+ port at the specified address. The pl011 serial port
+ must already be setup and configured. Options are not
+ yet supported.
+
+ smh Use ARM semihosting calls for early console.
+
earlyprintk= [X86,SH,BLACKFIN,ARM,M68k]
earlyprintk=vga
earlyprintk=efi
diff --git a/Documentation/serial/driver b/Documentation/serial/driver
index c3a7689a90e6..3bba1aeb799c 100644
--- a/Documentation/serial/driver
+++ b/Documentation/serial/driver
@@ -429,3 +429,28 @@ thus:
struct uart_port port;
int my_stuff;
};
+
+Modem control lines via GPIO
+----------------------------
+
+Some helpers are provided in order to set/get modem control lines via GPIO.
+
+mctrl_gpio_init(dev, idx):
+ This will get the {cts,rts,...}-gpios from device tree if they are
+ present and request them, set direction etc, and return an
+ allocated structure. devm_* functions are used, so there's no need
+ to call mctrl_gpio_free().
+
+mctrl_gpio_free(dev, gpios):
+ This will free the requested gpios in mctrl_gpio_init().
+ As devm_* function are used, there's generally no need to call
+ this function.
+
+mctrl_gpio_to_gpiod(gpios, gidx)
+ This returns the gpio structure associated to the modem line index.
+
+mctrl_gpio_set(gpios, mctrl):
+ This will sets the gpios according to the mctrl state.
+
+mctrl_gpio_get(gpios, mctrl):
+ This will update mctrl with the gpios values.
diff --git a/arch/arm/include/asm/dcc.h b/arch/arm/include/asm/dcc.h
new file mode 100644
index 000000000000..b74899de0774
--- /dev/null
+++ b/arch/arm/include/asm/dcc.h
@@ -0,0 +1,41 @@
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/barrier.h>
+
+static inline u32 __dcc_getstatus(void)
+{
+ u32 __ret;
+ asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
+ : "=r" (__ret) : : "cc");
+
+ return __ret;
+}
+
+static inline char __dcc_getchar(void)
+{
+ char __c;
+
+ asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
+ : "=r" (__c));
+ isb();
+
+ return __c;
+}
+
+static inline void __dcc_putchar(char c)
+{
+ asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
+ : /* no output register */
+ : "r" (c));
+ isb();
+}
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 4860918b411e..3f4bb58aea54 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -15,6 +15,7 @@
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
#include <linux/platform_device.h>
#include <linux/i2c-gpio.h>
@@ -924,7 +925,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -963,7 +963,14 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
+};
+
+static struct gpiod_lookup_table uart0_gpios_table = {
+ .dev_id = "atmel_usart",
+ .table = {
+ GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -994,7 +1001,7 @@ static inline void configure_usart0_pins(unsigned pins)
* We need to drive the pin manually. The serial driver will driver
* this to high when initializing.
*/
- uart0_data.rts_gpio = AT91_PIN_PA21;
+ gpiod_add_lookup_table(&uart0_gpios_table);
}
}
@@ -1014,7 +1021,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1066,7 +1072,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1110,7 +1115,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index adcfb88a5d7d..ef88e0fe4e80 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -819,7 +819,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -858,7 +857,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -910,7 +908,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -954,7 +951,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -998,7 +994,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
@@ -1042,7 +1037,6 @@ static struct resource uart4_resources[] = {
static struct atmel_uart_data uart4_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart4_dmamask = DMA_BIT_MASK(32);
@@ -1081,7 +1075,6 @@ static struct resource uart5_resources[] = {
static struct atmel_uart_data uart5_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart5_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 43b21f456f6e..29baacb5c359 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -881,7 +881,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -920,7 +919,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -964,7 +962,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1008,7 +1005,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 953616e5dbcb..309390d8e2f8 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -1326,7 +1326,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1365,7 +1364,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1409,7 +1407,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1453,7 +1450,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d943363c1845..391ab6bb536a 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1528,7 +1528,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1567,7 +1566,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1611,7 +1609,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1655,7 +1652,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1699,7 +1695,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 044ad8bc6963..0b1d71a7d9bf 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -993,7 +993,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .rts_gpio = -EINVAL,
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);
@@ -1032,7 +1031,6 @@ static struct resource uart0_resources[] = {
static struct atmel_uart_data uart0_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart0_dmamask = DMA_BIT_MASK(32);
@@ -1084,7 +1082,6 @@ static struct resource uart1_resources[] = {
static struct atmel_uart_data uart1_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart1_dmamask = DMA_BIT_MASK(32);
@@ -1128,7 +1125,6 @@ static struct resource uart2_resources[] = {
static struct atmel_uart_data uart2_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart2_dmamask = DMA_BIT_MASK(32);
@@ -1172,7 +1168,6 @@ static struct resource uart3_resources[] = {
static struct atmel_uart_data uart3_data = {
.use_dma_tx = 1,
.use_dma_rx = 1,
- .rts_gpio = -EINVAL,
};
static u64 uart3_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 12ed05bbdc5c..d3f05aaad8ba 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -50,6 +50,7 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
+static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset);
static int at91_gpiolib_direction_output(struct gpio_chip *chip,
unsigned offset, int val);
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
@@ -61,6 +62,7 @@ static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
.chip = { \
.label = name, \
.request = at91_gpiolib_request, \
+ .get_direction = at91_gpiolib_get_direction, \
.direction_input = at91_gpiolib_direction_input, \
.direction_output = at91_gpiolib_direction_output, \
.get = at91_gpiolib_get, \
@@ -800,6 +802,17 @@ static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
return 0;
}
+static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
+ void __iomem *pio = at91_gpio->regbase;
+ unsigned mask = 1 << offset;
+ u32 osr;
+
+ osr = __raw_readl(pio + PIO_OSR);
+ return !(osr & mask);
+}
+
static int at91_gpiolib_direction_input(struct gpio_chip *chip,
unsigned offset)
{
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index e759af5d7098..f5f63b715d91 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -112,6 +112,9 @@ config IOMMU_HELPER
config KERNEL_MODE_NEON
def_bool y
+config FIX_EARLYCON_MEM
+ def_bool y
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index d10ec334c93b..1c1b75629842 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -20,15 +20,6 @@ config STRICT_DEVMEM
If in doubt, say Y.
-config EARLY_PRINTK
- bool "Early printk support"
- default y
- help
- Say Y here if you want to have an early console using the
- earlyprintk=<name>[,<addr>][,<options>] kernel parameter. It
- is assumed that the early console device has been initialised
- by the boot loader prior to starting the Linux kernel.
-
config PID_IN_CONTEXTIDR
bool "Write the current PID to the CONTEXTIDR register"
help
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 7d811d9522bc..7a6fce5167e9 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -18,7 +18,6 @@ arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o
arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
-arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
arm64-obj-$(CONFIG_KGDB) += kgdb.o
diff --git a/arch/arm64/kernel/early_printk.c b/arch/arm64/kernel/early_printk.c
deleted file mode 100644
index 2dc36d00addf..000000000000
--- a/arch/arm64/kernel/early_printk.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Earlyprintk support.
- *
- * Copyright (C) 2012 ARM Ltd.
- * Author: Catalin Marinas <catalin.marinas@arm.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <linux/amba/serial.h>
-#include <linux/serial_reg.h>
-
-#include <asm/fixmap.h>
-
-static void __iomem *early_base;
-static void (*printch)(char ch);
-
-/*
- * PL011 single character TX.
- */
-static void pl011_printch(char ch)
-{
- while (readl_relaxed(early_base + UART01x_FR) & UART01x_FR_TXFF)
- ;
- writeb_relaxed(ch, early_base + UART01x_DR);
- while (readl_relaxed(early_base + UART01x_FR) & UART01x_FR_BUSY)
- ;
-}
-
-/*
- * Semihosting-based debug console
- */
-static void smh_printch(char ch)
-{
- asm volatile("mov x1, %0\n"
- "mov x0, #3\n"
- "hlt 0xf000\n"
- : : "r" (&ch) : "x0", "x1", "memory");
-}
-
-/*
- * 8250/16550 (8-bit aligned registers) single character TX.
- */
-static void uart8250_8bit_printch(char ch)
-{
- while (!(readb_relaxed(early_base + UART_LSR) & UART_LSR_THRE))
- ;
- writeb_relaxed(ch, early_base + UART_TX);
-}
-
-/*
- * 8250/16550 (32-bit aligned registers) single character TX.
- */
-static void uart8250_32bit_printch(char ch)
-{
- while (!(readl_relaxed(early_base + (UART_LSR << 2)) & UART_LSR_THRE))
- ;
- writel_relaxed(ch, early_base + (UART_TX << 2));
-}
-
-struct earlycon_match {
- const char *name;
- void (*printch)(char ch);
-};
-
-static const struct earlycon_match earlycon_match[] __initconst = {
- { .name = "pl011", .printch = pl011_printch, },
- { .name = "smh", .printch = smh_printch, },
- { .name = "uart8250-8bit", .printch = uart8250_8bit_printch, },
- { .name = "uart8250-32bit", .printch = uart8250_32bit_printch, },
- {}
-};
-
-static void early_write(struct console *con, const char *s, unsigned n)
-{
- while (n-- > 0) {
- if (*s == '\n')
- printch('\r');
- printch(*s);
- s++;
- }
-}
-
-static struct console early_console_dev = {
- .name = "earlycon",
- .write = early_write,
- .flags = CON_PRINTBUFFER | CON_BOOT,
- .index = -1,
-};
-
-/*
- * Parse earlyprintk=... parameter in the format:
- *
- * <name>[,<addr>][,<options>]
- *
- * and register the early console. It is assumed that the UART has been
- * initialised by the bootloader already.
- */
-static int __init setup_early_printk(char *buf)
-{
- const struct earlycon_match *match = earlycon_match;
- phys_addr_t paddr = 0;
-
- if (!buf) {
- pr_warning("No earlyprintk arguments passed.\n");
- return 0;
- }
-
- while (match->name) {
- size_t len = strlen(match->name);
- if (!strncmp(buf, match->name, len)) {
- buf += len;
- break;
- }
- match++;
- }
- if (!match->name) {
- pr_warning("Unknown earlyprintk arguments: %s\n", buf);
- return 0;
- }
-
- /* I/O address */
- if (!strncmp(buf, ",0x", 3)) {
- char *e;
- paddr = simple_strtoul(buf + 1, &e, 16);
- buf = e;
- }
- /* no options parsing yet */
-
- if (paddr)
- early_base = (void __iomem *)set_fixmap_offset_io(FIX_EARLYCON_MEM_BASE, paddr);
-
- printch = match->printch;
- early_console = &early_console_dev;
- register_console(&early_console_dev);
-
- return 0;
-}
-
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9c43ea3cf510..650433ab184f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -261,6 +261,9 @@ config ARCH_HWEIGHT_CFLAGS
config ARCH_SUPPORTS_UPROBES
def_bool y
+config FIX_EARLYCON_MEM
+ def_bool y
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index f1fbf4f1e5be..e00f8f5b5c8e 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -118,10 +118,6 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
int hci_uart_tx_wakeup(struct hci_uart *hu)
{
- struct tty_struct *tty = hu->tty;
- struct hci_dev *hdev = hu->hdev;
- struct sk_buff *skb;
-
if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) {
set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
return 0;
@@ -129,6 +125,22 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
BT_DBG("");
+ schedule_work(&hu->write_work);
+
+ return 0;
+}
+
+static void hci_uart_write_work(struct work_struct *work)
+{
+ struct hci_uart *hu = container_of(work, struct hci_uart, write_work);
+ struct tty_struct *tty = hu->tty;
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+
+ /* REVISIT: should we cope with bad skbs or ->write() returning
+ * and error value ?
+ */
+
restart:
clear_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
@@ -153,7 +165,6 @@ restart:
goto restart;
clear_bit(HCI_UART_SENDING, &hu->tx_state);
- return 0;
}
static void hci_uart_init_work(struct work_struct *work)
@@ -282,6 +293,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
tty->receive_room = 65536;
INIT_WORK(&hu->init_ready, hci_uart_init_work);
+ INIT_WORK(&hu->write_work, hci_uart_write_work);
spin_lock_init(&hu->rx_lock);
@@ -319,6 +331,8 @@ static void hci_uart_tty_close(struct tty_struct *tty)
if (hdev)
hci_uart_close(hdev);
+ cancel_work_sync(&hu->write_work);
+
if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
if (hdev) {
if (test_bit(HCI_UART_REGISTERED, &hu->flags))
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index fffa61ff5cb1..12df101ca942 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -68,6 +68,7 @@ struct hci_uart {
unsigned long hdev_flags;
struct work_struct init_ready;
+ struct work_struct write_work;
struct hci_uart_proto *proto;
void *priv;
diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index ff53314100f6..ee932004724f 100644
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
timedia_9079a,
timedia_9079b,
timedia_9079c,
+ wch_ch353_1s1p,
wch_ch353_2s1p,
sunix_2s1p,
};
@@ -148,6 +149,7 @@ static struct parport_pc_pci cards[] = {
/* timedia_9079a */ { 1, { { 2, 3 }, } },
/* timedia_9079b */ { 1, { { 2, 3 }, } },
/* timedia_9079c */ { 1, { { 2, 3 }, } },
+ /* wch_ch353_1s1p*/ { 1, { { 1, -1}, } },
/* wch_ch353_2s1p*/ { 1, { { 2, -1}, } },
/* sunix_2s1p */ { 1, { { 3, -1 }, } },
};
@@ -253,6 +255,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
/* WCH CARDS */
+ { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
/*
@@ -479,6 +482,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
.base_baud = 921600,
.uart_offset = 8,
},
+ [wch_ch353_1s1p] = {
+ .flags = FL_BASE0|FL_BASE_BARS,
+ .num_ports = 1,
+ .base_baud = 115200,
+ .uart_offset = 8,
+ },
[wch_ch353_2s1p] = {
.flags = FL_BASE0|FL_BASE_BARS,
.num_ports = 2,
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 0ff7fda0742f..4fcec1d793a7 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -760,10 +760,17 @@ static int khvcd(void *unused)
if (poll_mask == 0)
schedule();
else {
+ unsigned long j_timeout;
+
if (timeout < MAX_TIMEOUT)
timeout += (timeout >> 6) + 1;
- msleep_interruptible(timeout);
+ /*
+ * We don't use msleep_interruptible otherwise
+ * "kick" will fail to wake us up
+ */
+ j_timeout = msecs_to_jiffies(timeout) + 1;
+ schedule_timeout_interruptible(j_timeout);
}
}
__set_current_state(TASK_RUNNING);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 3502a7bbb69e..809920d80a66 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010, 2014 The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -8,20 +8,11 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
*/
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/err.h>
#include <linux/init.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
+#include <asm/dcc.h>
#include <asm/processor.h>
#include "hvc_console.h"
@@ -30,35 +21,6 @@
#define DCC_STATUS_RX (1 << 30)
#define DCC_STATUS_TX (1 << 29)
-static inline u32 __dcc_getstatus(void)
-{
- u32 __ret;
- asm volatile("mrc p14, 0, %0, c0, c1, 0 @ read comms ctrl reg"
- : "=r" (__ret) : : "cc");
-
- return __ret;
-}
-
-
-static inline char __dcc_getchar(void)
-{
- char __c;
-
- asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
- : "=r" (__c));
- isb();
-
- return __c;
-}
-
-static inline void __dcc_putchar(char c)
-{
- asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
- : /* no output register */
- : "r" (c));
- isb();
-}
-
static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
{
int i;
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 1b2db9a3038c..644ddb841d9f 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -848,13 +848,11 @@ static struct n_hdlc *n_hdlc_alloc(void)
{
struct n_hdlc_buf *buf;
int i;
- struct n_hdlc *n_hdlc = kmalloc(sizeof(*n_hdlc), GFP_KERNEL);
+ struct n_hdlc *n_hdlc = kzalloc(sizeof(*n_hdlc), GFP_KERNEL);
if (!n_hdlc)
return NULL;
- memset(n_hdlc, 0, sizeof(*n_hdlc));
-
n_hdlc_buf_list_init(&n_hdlc->rx_free_buf_list);
n_hdlc_buf_list_init(&n_hdlc->tx_free_buf_list);
n_hdlc_buf_list_init(&n_hdlc->rx_buf_list);
@@ -952,8 +950,6 @@ static char hdlc_register_ok[] __initdata =
KERN_INFO "N_HDLC line discipline registered.\n";
static char hdlc_register_fail[] __initdata =
KERN_ERR "error registering line discipline: %d\n";
-static char hdlc_init_fail[] __initdata =
- KERN_INFO "N_HDLC: init failure %d\n";
static int __init n_hdlc_init(void)
{
@@ -973,8 +969,6 @@ static int __init n_hdlc_init(void)
else
printk(hdlc_register_fail, status);
- if (status)
- printk(hdlc_init_fail, status);
return status;
} /* end of init_module() */
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 2d4bd3929e50..27f7ad6b74c1 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1926,13 +1926,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
wait_for_xmitr(up, BOTH_EMPTY);
/*
* Send the character out.
- * If a LF, also do CR...
*/
serial_port_out(port, UART_TX, c);
- if (c == 10) {
- wait_for_xmitr(up, BOTH_EMPTY);
- serial_port_out(port, UART_TX, 13);
- }
/*
* Finally, wait for transmitter to become empty
@@ -2338,9 +2333,11 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
* the trigger, or the MCR RTS bit is cleared. In the case where
* the remote UART is not using CTS auto flow control, we must
* have sufficient FIFO entries for the latency of the remote
- * UART to respond. IOW, at least 32 bytes of FIFO.
+ * UART to respond. IOW, at least 32 bytes of FIFO. Also enable
+ * AFE if hw flow control is supported
*/
- if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) {
+ if ((up->capabilities & UART_CAP_AFE && (port->fifosize >= 32)) ||
+ (port->flags & UPF_HARD_FLOW)) {
up->mcr &= ~UART_MCR_AFE;
if (termios->c_cflag & CRTSCTS)
up->mcr |= UART_MCR_AFE;
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index ab9096dc3849..148ffe4c232f 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -192,21 +192,28 @@ int serial8250_request_dma(struct uart_8250_port *p)
dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size,
&dma->rx_addr, GFP_KERNEL);
- if (!dma->rx_buf) {
- dma_release_channel(dma->rxchan);
- dma_release_channel(dma->txchan);
- return -ENOMEM;
- }
+ if (!dma->rx_buf)
+ goto err;
/* TX buffer */
dma->tx_addr = dma_map_single(dma->txchan->device->dev,
p->port.state->xmit.buf,
UART_XMIT_SIZE,
DMA_TO_DEVICE);
+ if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) {
+ dma_free_coherent(dma->rxchan->device->dev, dma->rx_size,
+ dma->rx_buf, dma->rx_addr);
+ goto err;
+ }
dev_dbg_ratelimited(p->port.dev, "got both dma channels\n");
return 0;
+err:
+ dma_release_channel(dma->rxchan);
+ dma_release_channel(dma->txchan);
+
+ return -ENOMEM;
}
EXPORT_SYMBOL_GPL(serial8250_request_dma);
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index ed3113576740..51b307aab75e 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -62,6 +62,70 @@ struct dw8250_data {
struct uart_8250_dma dma;
};
+struct dw8250_acpi_desc {
+ void (*set_termios)(struct uart_port *p, struct ktermios *termios,
+ struct ktermios *old);
+};
+
+#define BYT_PRV_CLK 0x800
+#define BYT_PRV_CLK_EN (1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT 1
+#define BYT_PRV_CLK_N_VAL_SHIFT 16
+#define BYT_PRV_CLK_UPDATE (1 << 31)
+
+static void byt_set_termios(struct uart_port *p, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud = tty_termios_baud_rate(termios);
+ unsigned int m, n;
+ u32 reg;
+
+ /*
+ * For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
+ * dividers must be adjusted.
+ *
+ * uartclk = (m / n) * 100 MHz, where m <= n
+ */
+ switch (baud) {
+ case 500000:
+ case 1000000:
+ case 2000000:
+ case 4000000:
+ m = 64;
+ n = 100;
+ p->uartclk = 64000000;
+ break;
+ case 3500000:
+ m = 56;
+ n = 100;
+ p->uartclk = 56000000;
+ break;
+ case 1500000:
+ case 3000000:
+ m = 48;
+ n = 100;
+ p->uartclk = 48000000;
+ break;
+ case 2500000:
+ m = 40;
+ n = 100;
+ p->uartclk = 40000000;
+ break;
+ default:
+ m = 2304;
+ n = 3125;
+ p->uartclk = 73728000;
+ }
+
+ /* Reset the clock */
+ reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+ writel(reg, p->membase + BYT_PRV_CLK);
+ reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+ writel(reg, p->membase + BYT_PRV_CLK);
+
+ serial8250_do_set_termios(p, termios, old);
+}
+
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
@@ -278,6 +342,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
{
const struct acpi_device_id *id;
struct uart_port *p = &up->port;
+ struct dw8250_acpi_desc *acpi_desc;
dw8250_setup_port(up);
@@ -290,14 +355,18 @@ static int dw8250_probe_acpi(struct uart_8250_port *up,
p->serial_out = dw8250_serial_out32;
p->regshift = 2;
- if (!p->uartclk)
- p->uartclk = (unsigned int)id->driver_data;
-
up->dma = &data->dma;
up->dma->rxconf.src_maxburst = p->fifosize / 4;
up->dma->txconf.dst_maxburst = p->fifosize / 4;
+ acpi_desc = (struct dw8250_acpi_desc *)id->driver_data;
+ if (!acpi_desc)
+ return 0;
+
+ if (acpi_desc->set_termios)
+ p->set_termios = acpi_desc->set_termios;
+
return 0;
}
@@ -445,12 +514,16 @@ static const struct of_device_id dw8250_of_match[] = {
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
+static struct dw8250_acpi_desc byt_8250_desc = {
+ .set_termios = byt_set_termios,
+};
+
static const struct acpi_device_id dw8250_acpi_match[] = {
{ "INT33C4", 0 },
{ "INT33C5", 0 },
{ "INT3434", 0 },
{ "INT3435", 0 },
- { "80860F0A", 0 },
+ { "80860F0A", (kernel_ulong_t)&byt_8250_desc},
{ },
};
MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index c100d6343d50..cfef801a49d4 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -35,18 +35,8 @@
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/serial.h>
-#ifdef CONFIG_FIX_EARLYCON_MEM
-#include <asm/pgtable.h>
-#include <asm/fixmap.h>
-#endif
-struct early_serial8250_device {
- struct uart_port port;
- char options[16]; /* e.g., 115200n8 */
- unsigned int baud;
-};
-
-static struct early_serial8250_device early_device;
+static struct earlycon_device *early_device;
unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset)
{
@@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c)
static void __init early_serial8250_write(struct console *console,
const char *s, unsigned int count)
{
- struct uart_port *port = &early_device.port;
+ struct uart_port *port = &early_device->port;
unsigned int ier;
/* Save the IER and disable interrupts */
@@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port)
return (port->uartclk / 16) / quot;
}
-static void __init init_port(struct early_serial8250_device *device)
+static void __init init_port(struct earlycon_device *device)
{
struct uart_port *port = &device->port;
unsigned int divisor;
@@ -148,128 +138,42 @@ static void __init init_port(struct early_serial8250_device *device)
serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
}
-static int __init parse_options(struct early_serial8250_device *device,
- char *options)
+static int __init early_serial8250_setup(struct earlycon_device *device,
+ const char *options)
{
- struct uart_port *port = &device->port;
- int mmio, mmio32, length;
-
- if (!options)
- return -ENODEV;
-
- port->uartclk = BASE_BAUD * 16;
-
- mmio = !strncmp(options, "mmio,", 5);
- mmio32 = !strncmp(options, "mmio32,", 7);
- if (mmio || mmio32) {
- port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
- port->mapbase = simple_strtoul(options + (mmio ? 5 : 7),
- &options, 0);
- if (mmio32)
- port->regshift = 2;
-#ifdef CONFIG_FIX_EARLYCON_MEM
- set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
- port->mapbase & PAGE_MASK);
- port->membase =
- (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
- port->membase += port->mapbase & ~PAGE_MASK;
-#else
- port->membase = ioremap_nocache(port->mapbase, 64);
- if (!port->membase) {
- printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n",
- __func__,
- (unsigned long long) port->mapbase);
- return -ENOMEM;
- }
-#endif
- } else if (!strncmp(options, "io,", 3)) {
- port->iotype = UPIO_PORT;
- port->iobase = simple_strtoul(options + 3, &options, 0);
- mmio = 0;
- } else
- return -EINVAL;
-
- options = strchr(options, ',');
- if (options) {
- options++;
- device->baud = simple_strtoul(options, NULL, 0);
- length = min(strcspn(options, " ") + 1,
- (size_t)(sizeof(device->options)));
- strlcpy(device->options, options, length);
- } else {
- device->baud = probe_baud(port);
- snprintf(device->options, sizeof(device->options), "%u",
- device->baud);
- }
-
- if (mmio || mmio32)
- printk(KERN_INFO
- "Early serial console at MMIO%s 0x%llx (options '%s')\n",
- mmio32 ? "32" : "",
- (unsigned long long)port->mapbase,
- device->options);
- else
- printk(KERN_INFO
- "Early serial console at I/O port 0x%lx (options '%s')\n",
- port->iobase,
- device->options);
-
- return 0;
-}
-
-static struct console early_serial8250_console __initdata = {
- .name = "uart",
- .write = early_serial8250_write,
- .flags = CON_PRINTBUFFER | CON_BOOT,
- .index = -1,
-};
-
-static int __init early_serial8250_setup(char *options)
-{
- struct early_serial8250_device *device = &early_device;
- int err;
-
- if (device->port.membase || device->port.iobase)
+ if (!(device->port.membase || device->port.iobase))
return 0;
- err = parse_options(device, options);
- if (err < 0)
- return err;
+ if (!device->baud)
+ device->baud = probe_baud(&device->port);
init_port(device);
+
+ early_device = device;
+ device->con->write = early_serial8250_write;
return 0;
}
+EARLYCON_DECLARE(uart8250, early_serial8250_setup);
+EARLYCON_DECLARE(uart, early_serial8250_setup);
int __init setup_early_serial8250_console(char *cmdline)
{
- char *options;
- int err;
+ char match[] = "uart8250";
- options = strstr(cmdline, "uart8250,");
- if (!options) {
- options = strstr(cmdline, "uart,");
- if (!options)
- return 0;
- }
+ if (cmdline && cmdline[4] == ',')
+ match[4] = '\0';
- options = strchr(cmdline, ',') + 1;
- err = early_serial8250_setup(options);
- if (err < 0)
- return err;
-
- register_console(&early_serial8250_console);
-
- return 0;
+ return setup_earlycon(cmdline, match, early_serial8250_setup);
}
int serial8250_find_port_for_earlycon(void)
{
- struct early_serial8250_device *device = &early_device;
- struct uart_port *port = &device->port;
+ struct earlycon_device *device = early_device;
+ struct uart_port *port = device ? &device->port : NULL;
int line;
int ret;
- if (!device->port.membase && !device->port.iobase)
+ if (!port || (!port->membase && !port->iobase))
return -ENODEV;
line = serial8250_find_port(port);
@@ -284,5 +188,3 @@ int serial8250_find_port_for_earlycon(void)
return ret;
}
-
-early_param("earlycon", setup_early_serial8250_console);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b14bcba96c25..33137b3ba94d 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1753,6 +1753,8 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
+#define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618
+#define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618
#define PCI_DEVICE_ID_TITAN_200I 0x8028
#define PCI_DEVICE_ID_TITAN_400I 0x8048
#define PCI_DEVICE_ID_TITAN_800I 0x8088
@@ -1778,6 +1780,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
#define PCI_DEVICE_ID_WCH_CH352_2S 0x3253
#define PCI_DEVICE_ID_WCH_CH353_4S 0x3453
#define PCI_DEVICE_ID_WCH_CH353_2S1PF 0x5046
+#define PCI_DEVICE_ID_WCH_CH353_1S1P 0x5053
#define PCI_DEVICE_ID_WCH_CH353_2S1P 0x7053
#define PCI_VENDOR_ID_AGESTAR 0x5372
#define PCI_DEVICE_ID_AGESTAR_9375 0x6872
@@ -2410,6 +2413,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_omegapci_setup,
},
+ /* WCH CH353 1S1P card (16550 clone) */
+ {
+ .vendor = PCI_VENDOR_ID_WCH,
+ .device = PCI_DEVICE_ID_WCH_CH353_1S1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_wch_ch353_setup,
+ },
/* WCH CH353 2S1P card (16550 clone) */
{
.vendor = PCI_VENDOR_ID_WCH,
@@ -3526,6 +3537,7 @@ static const struct pci_device_id blacklist[] = {
/* multi-io cards handled by parport_serial */
{ PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
+ { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
};
/*
@@ -3880,6 +3892,13 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620,
PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0,
pbn_b2_8_921600 },
+ /* Advantech also use 0x3618 and 0xf618 */
+ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3618,
+ PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
+ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCIf618,
+ PCI_DEVICE_ID_ADVANTECH_PCI3618, PCI_ANY_ID, 0, 0,
+ pbn_b0_4_921600 },
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0,
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 23329918f229..349ee598b34c 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -61,6 +61,7 @@ config SERIAL_8250_CONSOLE
bool "Console on 8250/16550 and compatible serial port"
depends on SERIAL_8250=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
@@ -90,11 +91,6 @@ config SERIAL_8250_CONSOLE
If unsure, say N.
-config FIX_EARLYCON_MEM
- bool
- depends on X86
- default y
-
config SERIAL_8250_GSC
tristate
depends on SERIAL_8250 && GSC
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 5d9b01aa54f4..fb57159bad3a 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -7,6 +7,13 @@ if TTY
menu "Serial drivers"
depends on HAS_IOMEM
+config SERIAL_EARLYCON
+ bool
+ help
+ Support for early consoles with the earlycon parameter. This enables
+ the console before standard serial driver is probed. The console is
+ enabled when early_param is processed.
+
source "drivers/tty/serial/8250/Kconfig"
comment "Non-8250 serial port support"
@@ -53,6 +60,7 @@ config SERIAL_AMBA_PL011_CONSOLE
bool "Support for console on AMBA serial port"
depends on SERIAL_AMBA_PL011=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
---help---
Say Y here if you wish to use an AMBA PrimeCell UART as the system
console (the system console is the device which receives all kernel
@@ -65,6 +73,18 @@ config SERIAL_AMBA_PL011_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+config SERIAL_EARLYCON_ARM_SEMIHOST
+ bool "Early console using ARM semihosting"
+ depends on ARM64 || ARM
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
+ help
+ Support for early debug console using ARM semihosting. This enables
+ the console before standard serial driver is probed. This is enabled
+ with "earlycon=smh" on the kernel command line. The console is
+ enabled when early_param is processed.
+
config SERIAL_SB1250_DUART
tristate "BCM1xxx on-chip DUART serial support"
depends on SIBYTE_SB1xxx_SOC=y
@@ -97,6 +117,7 @@ config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
depends on ARCH_AT91 || AVR32
select SERIAL_CORE
+ select SERIAL_MCTRL_GPIO
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 and AT32 processors.
@@ -1160,6 +1181,16 @@ config SERIAL_SCCNXP_CONSOLE
help
Support for console on SCCNXP serial ports.
+config SERIAL_SC16IS7XX
+ tristate "SC16IS7xx serial support"
+ depends on I2C
+ select SERIAL_CORE
+ select REGMAP_I2C if I2C
+ help
+ This selects support for SC16IS7xx serial ports.
+ Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
+ SC16IS760 and SC16IS762.
+
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART"
depends on BLACKFIN
@@ -1323,7 +1354,7 @@ config SERIAL_IFX6X60
config SERIAL_PCH_UART
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
- depends on PCI
+ depends on PCI && (X86_32 || COMPILE_TEST)
select SERIAL_CORE
help
This driver is for PCH(Platform controller Hub) UART of Intel EG20T
@@ -1369,18 +1400,19 @@ config SERIAL_MXS_AUART_CONSOLE
Enable a MXS AUART port to be the system console.
config SERIAL_XILINX_PS_UART
- tristate "Xilinx PS UART support"
+ tristate "Cadence (Xilinx Zynq) UART support"
depends on OF
select SERIAL_CORE
help
- This driver supports the Xilinx PS UART port.
+ This driver supports the Cadence UART. It is found e.g. in Xilinx
+ Zynq.
config SERIAL_XILINX_PS_UART_CONSOLE
- bool "Xilinx PS UART console support"
+ bool "Cadence UART console support"
depends on SERIAL_XILINX_PS_UART=y
select SERIAL_CORE_CONSOLE
help
- Enable a Xilinx PS UART port to be the system console.
+ Enable a Cadence UART port to be the system console.
config SERIAL_AR933X
tristate "AR933X serial port support"
@@ -1479,6 +1511,7 @@ config SERIAL_RP2_NR_UARTS
config SERIAL_FSL_LPUART
tristate "Freescale lpuart serial port support"
+ depends on HAS_DMA
select SERIAL_CORE
help
Support for the on-chip lpuart on some Freescale SOCs.
@@ -1508,6 +1541,20 @@ config SERIAL_ST_ASC_CONSOLE
depends on SERIAL_ST_ASC=y
select SERIAL_CORE_CONSOLE
+config SERIAL_MEN_Z135
+ tristate "MEN 16z135 Support"
+ select SERIAL_CORE
+ depends on MCB
+ help
+ Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
+ on a MCB carrier.
+
+ This driver can also be build as a module. If so, the module will be called
+ men_z135_uart.ko
+
endmenu
+config SERIAL_MCTRL_GPIO
+ tristate
+
endif # TTY
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 3680854fef41..0080cc362e09 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -5,6 +5,9 @@
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
+obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
+obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
+
# These Sparc drivers have to appear before others such as 8250
# which share ttySx minor node space. Otherwise console device
# names change and other unplesantries.
@@ -48,6 +51,7 @@ obj-$(CONFIG_SERIAL_MPSC) += mpsc.o
obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o
obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o
+obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
@@ -87,3 +91,7 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
obj-$(CONFIG_SERIAL_RP2) += rp2.o
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
+obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
+
+# GPIOLIB helpers for modem control lines
+obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index dacf0a09ab24..ee3d80346780 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -303,7 +303,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
/* Optionally make use of an RX channel as well */
chan = dma_request_slave_channel(dev, "rx");
-
+
if (!chan && plat->dma_rx_param) {
chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
@@ -2045,6 +2045,34 @@ static struct console amba_console = {
};
#define AMBA_CONSOLE (&amba_console)
+
+static void pl011_putc(struct uart_port *port, int c)
+{
+ while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF)
+ ;
+ writeb(c, port->membase + UART01x_DR);
+ while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY)
+ ;
+}
+
+static void pl011_early_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, n, pl011_putc);
+}
+
+static int __init pl011_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = pl011_early_write;
+ return 0;
+}
+EARLYCON_DECLARE(pl011, pl011_early_console_setup);
+
#else
#define AMBA_CONSOLE NULL
#endif
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 53eeea13ff16..3fceae099c44 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -43,6 +43,9 @@
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/err.h>
+#include <linux/irq.h>
#include <asm/io.h>
#include <asm/ioctls.h>
@@ -57,6 +60,8 @@
#include <linux/serial_core.h>
+#include "serial_mctrl_gpio.h"
+
static void atmel_start_rx(struct uart_port *port);
static void atmel_stop_rx(struct uart_port *port);
@@ -162,8 +167,10 @@ struct atmel_uart_port {
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
- int rts_gpio; /* optional RTS GPIO */
+ struct mctrl_gpios *gpios;
+ int gpio_irq[UART_GPIO_MAX];
unsigned int tx_done_mask;
+ bool ms_irq_enabled;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
int (*prepare_rx)(struct uart_port *port);
@@ -237,6 +244,50 @@ static bool atmel_use_dma_rx(struct uart_port *port)
return atmel_port->use_dma_rx;
}
+static unsigned int atmel_get_lines_status(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int status, ret = 0;
+
+ status = UART_GET_CSR(port);
+
+ mctrl_gpio_get(atmel_port->gpios, &ret);
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_CTS))) {
+ if (ret & TIOCM_CTS)
+ status &= ~ATMEL_US_CTS;
+ else
+ status |= ATMEL_US_CTS;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DSR))) {
+ if (ret & TIOCM_DSR)
+ status &= ~ATMEL_US_DSR;
+ else
+ status |= ATMEL_US_DSR;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_RI))) {
+ if (ret & TIOCM_RI)
+ status &= ~ATMEL_US_RI;
+ else
+ status |= ATMEL_US_RI;
+ }
+
+ if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
+ UART_GPIO_DCD))) {
+ if (ret & TIOCM_CD)
+ status &= ~ATMEL_US_DCD;
+ else
+ status |= ATMEL_US_DCD;
+ }
+
+ return status;
+}
+
/* Enable or disable the rs485 support */
void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
{
@@ -296,17 +347,6 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
- /*
- * AT91RM9200 Errata #39: RTS0 is not internally connected
- * to PA21. We need to drive the pin as a GPIO.
- */
- if (gpio_is_valid(atmel_port->rts_gpio)) {
- if (mctrl & TIOCM_RTS)
- gpio_set_value(atmel_port->rts_gpio, 0);
- else
- gpio_set_value(atmel_port->rts_gpio, 1);
- }
-
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
else
@@ -319,6 +359,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
UART_PUT_CR(port, control);
+ mctrl_gpio_set(atmel_port->gpios, mctrl);
+
/* Local loopback mode? */
mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
if (mctrl & TIOCM_LOOP)
@@ -346,7 +388,8 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
*/
static u_int atmel_get_mctrl(struct uart_port *port)
{
- unsigned int status, ret = 0;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ unsigned int ret = 0, status;
status = UART_GET_CSR(port);
@@ -362,7 +405,7 @@ static u_int atmel_get_mctrl(struct uart_port *port)
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
- return ret;
+ return mctrl_gpio_get(atmel_port->gpios, &ret);
}
/*
@@ -449,8 +492,38 @@ static void atmel_stop_rx(struct uart_port *port)
*/
static void atmel_enable_ms(struct uart_port *port)
{
- UART_PUT_IER(port, ATMEL_US_RIIC | ATMEL_US_DSRIC
- | ATMEL_US_DCDIC | ATMEL_US_CTSIC);
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ uint32_t ier = 0;
+
+ /*
+ * Interrupt should not be enabled twice
+ */
+ if (atmel_port->ms_irq_enabled)
+ return;
+
+ atmel_port->ms_irq_enabled = true;
+
+ if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
+ else
+ ier |= ATMEL_US_CTSIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
+ else
+ ier |= ATMEL_US_DSRIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
+ else
+ ier |= ATMEL_US_RIIC;
+
+ if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
+ enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
+ else
+ ier |= ATMEL_US_DCDIC;
+
+ UART_PUT_IER(port, ier);
}
/*
@@ -1039,11 +1112,31 @@ atmel_handle_status(struct uart_port *port, unsigned int pending,
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, pending, pass_counter = 0;
+ bool gpio_handled = false;
do {
- status = UART_GET_CSR(port);
+ status = atmel_get_lines_status(port);
pending = status & UART_GET_IMR(port);
+ if (!gpio_handled) {
+ /*
+ * Dealing with GPIO interrupt
+ */
+ if (irq == atmel_port->gpio_irq[UART_GPIO_CTS])
+ pending |= ATMEL_US_CTSIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_DSR])
+ pending |= ATMEL_US_DSRIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_RI])
+ pending |= ATMEL_US_RIIC;
+
+ if (irq == atmel_port->gpio_irq[UART_GPIO_DCD])
+ pending |= ATMEL_US_DCDIC;
+
+ gpio_handled = true;
+ }
if (!pending)
break;
@@ -1523,6 +1616,45 @@ static void atmel_get_ip_name(struct uart_port *port)
}
}
+static void atmel_free_gpio_irq(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ enum mctrl_gpio_idx i;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (atmel_port->gpio_irq[i] >= 0)
+ free_irq(atmel_port->gpio_irq[i], port);
+}
+
+static int atmel_request_gpio_irq(struct uart_port *port)
+{
+ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+ int *irq = atmel_port->gpio_irq;
+ enum mctrl_gpio_idx i;
+ int err = 0;
+
+ for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
+ if (irq[i] < 0)
+ continue;
+
+ irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
+ err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH,
+ "atmel_serial", port);
+ if (err)
+ dev_err(port->dev, "atmel_startup - Can't get %d irq\n",
+ irq[i]);
+ }
+
+ /*
+ * If something went wrong, rollback.
+ */
+ while (err && (--i >= 0))
+ if (irq[i] >= 0)
+ free_irq(irq[i], port);
+
+ return err;
+}
+
/*
* Perform initialization and enable port for reception
*/
@@ -1539,6 +1671,7 @@ static int atmel_startup(struct uart_port *port)
* handle an unexpected interrupt
*/
UART_PUT_IDR(port, -1);
+ atmel_port->ms_irq_enabled = false;
/*
* Allocate the IRQ
@@ -1551,6 +1684,13 @@ static int atmel_startup(struct uart_port *port)
}
/*
+ * Get the GPIO lines IRQ
+ */
+ retval = atmel_request_gpio_irq(port);
+ if (retval)
+ goto free_irq;
+
+ /*
* Initialize DMA (if necessary)
*/
atmel_init_property(atmel_port, pdev);
@@ -1568,7 +1708,7 @@ static int atmel_startup(struct uart_port *port)
}
/* Save current CSR for comparison in atmel_tasklet_func() */
- atmel_port->irq_status_prev = UART_GET_CSR(port);
+ atmel_port->irq_status_prev = atmel_get_lines_status(port);
atmel_port->irq_status = atmel_port->irq_status_prev;
/*
@@ -1614,6 +1754,11 @@ static int atmel_startup(struct uart_port *port)
}
return 0;
+
+free_irq:
+ free_irq(port->irq, port);
+
+ return retval;
}
/*
@@ -1661,9 +1806,12 @@ static void atmel_shutdown(struct uart_port *port)
atmel_port->rx_ring.tail = 0;
/*
- * Free the interrupt
+ * Free the interrupts
*/
free_irq(port->irq, port);
+ atmel_free_gpio_irq(port);
+
+ atmel_port->ms_irq_enabled = false;
}
/*
@@ -2324,6 +2472,26 @@ static int atmel_serial_resume(struct platform_device *pdev)
#define atmel_serial_resume NULL
#endif
+static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
+{
+ enum mctrl_gpio_idx i;
+ struct gpio_desc *gpiod;
+
+ p->gpios = mctrl_gpio_init(dev, 0);
+ if (IS_ERR_OR_NULL(p->gpios))
+ return -1;
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ gpiod = mctrl_gpio_to_gpiod(p->gpios, i);
+ if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
+ p->gpio_irq[i] = gpiod_to_irq(gpiod);
+ else
+ p->gpio_irq[i] = -EINVAL;
+ }
+
+ return 0;
+}
+
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
@@ -2359,25 +2527,11 @@ static int atmel_serial_probe(struct platform_device *pdev)
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
- port->rts_gpio = -EINVAL; /* Invalid, zero could be valid */
- if (pdata)
- port->rts_gpio = pdata->rts_gpio;
- else if (np)
- port->rts_gpio = of_get_named_gpio(np, "rts-gpios", 0);
-
- if (gpio_is_valid(port->rts_gpio)) {
- ret = devm_gpio_request(&pdev->dev, port->rts_gpio, "RTS");
- if (ret) {
- dev_err(&pdev->dev, "error requesting RTS GPIO\n");
- goto err;
- }
- /* Default to 1 as RTS is active low */
- ret = gpio_direction_output(port->rts_gpio, 1);
- if (ret) {
- dev_err(&pdev->dev, "error setting up RTS GPIO\n");
- goto err;
- }
- }
+
+ ret = atmel_init_gpios(port, &pdev->dev);
+ if (ret < 0)
+ dev_err(&pdev->dev, "%s",
+ "Failed to initialize GPIOs. The serial port may not work as expected");
ret = atmel_init_port(port, pdev);
if (ret)
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 7d76214612c7..aa60e6d13eca 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -971,7 +971,7 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
* Note that this is called with interrupts already disabled
*/
static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
- const char *string, u_int count)
+ const char *string, u_int count, bool handle_linefeed)
{
unsigned int i;
cbd_t __iomem *bdp, *bdbase;
@@ -1013,7 +1013,7 @@ static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
bdp++;
/* if a LF, also do CR... */
- if (*string == 10) {
+ if (handle_linefeed && *string == 10) {
while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
@@ -1111,7 +1111,7 @@ static void cpm_put_poll_char(struct uart_port *port,
static char ch[2];
ch[0] = (char)c;
- cpm_uart_early_write(pinfo, ch, 1);
+ cpm_uart_early_write(pinfo, ch, 1, false);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1275,7 +1275,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
spin_lock_irqsave(&pinfo->port.lock, flags);
}
- cpm_uart_early_write(pinfo, s, count);
+ cpm_uart_early_write(pinfo, s, count, true);
if (unlikely(nolock)) {
local_irq_restore(flags);
diff --git a/drivers/tty/serial/earlycon-arm-semihost.c b/drivers/tty/serial/earlycon-arm-semihost.c
new file mode 100644
index 000000000000..383db10fbb49
--- /dev/null
+++ b/drivers/tty/serial/earlycon-arm-semihost.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Adapted for ARM and earlycon:
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEMIHOST_SWI "0xab"
+#else
+#define SEMIHOST_SWI "0x123456"
+#endif
+
+/*
+ * Semihosting-based debug console
+ */
+static void smh_putc(struct uart_port *port, int c)
+{
+#ifdef CONFIG_ARM64
+ asm volatile("mov x1, %0\n"
+ "mov x0, #3\n"
+ "hlt 0xf000\n"
+ : : "r" (&c) : "x0", "x1", "memory");
+#else
+ asm volatile("mov r1, %0\n"
+ "mov r0, #3\n"
+ "svc " SEMIHOST_SWI "\n"
+ : : "r" (&c) : "r0", "r1", "memory");
+#endif
+}
+
+static void smh_write(struct console *con, const char *s, unsigned n)
+{
+ struct earlycon_device *dev = con->data;
+ uart_console_write(&dev->port, s, n, smh_putc);
+}
+
+int __init early_smh_setup(struct earlycon_device *device, const char *opt)
+{
+ device->con->write = smh_write;
+ return 0;
+}
+EARLYCON_DECLARE(smh, early_smh_setup);
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
new file mode 100644
index 000000000000..c92e83088adb
--- /dev/null
+++ b/drivers/tty/serial/earlycon.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Rob Herring <robh@kernel.org>
+ *
+ * Based on 8250 earlycon:
+ * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/serial_core.h>
+
+#ifdef CONFIG_FIX_EARLYCON_MEM
+#include <asm/fixmap.h>
+#endif
+
+#include <asm/serial.h>
+
+static struct console early_con = {
+ .name = "earlycon",
+ .flags = CON_PRINTBUFFER | CON_BOOT,
+ .index = -1,
+};
+
+static struct earlycon_device early_console_dev = {
+ .con = &early_con,
+};
+
+static void __iomem * __init earlycon_map(unsigned long paddr, size_t size)
+{
+ void __iomem *base;
+#ifdef CONFIG_FIX_EARLYCON_MEM
+ set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK);
+ base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ base += paddr & ~PAGE_MASK;
+#else
+ base = ioremap(paddr, size);
+#endif
+ if (!base)
+ pr_err("%s: Couldn't map 0x%llx\n", __func__,
+ (unsigned long long)paddr);
+
+ return base;
+}
+
+static int __init parse_options(struct earlycon_device *device,
+ char *options)
+{
+ struct uart_port *port = &device->port;
+ int mmio, mmio32, length;
+ unsigned long addr;
+
+ if (!options)
+ return -ENODEV;
+
+ mmio = !strncmp(options, "mmio,", 5);
+ mmio32 = !strncmp(options, "mmio32,", 7);
+ if (mmio || mmio32) {
+ port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32);
+ options += mmio ? 5 : 7;
+ addr = simple_strtoul(options, NULL, 0);
+ port->mapbase = addr;
+ if (mmio32)
+ port->regshift = 2;
+ } else if (!strncmp(options, "io,", 3)) {
+ port->iotype = UPIO_PORT;
+ options += 3;
+ addr = simple_strtoul(options, NULL, 0);
+ port->iobase = addr;
+ mmio = 0;
+ } else if (!strncmp(options, "0x", 2)) {
+ port->iotype = UPIO_MEM;
+ addr = simple_strtoul(options, NULL, 0);
+ port->mapbase = addr;
+ } else {
+ return -EINVAL;
+ }
+
+ port->uartclk = BASE_BAUD * 16;
+
+ options = strchr(options, ',');
+ if (options) {
+ options++;
+ device->baud = simple_strtoul(options, NULL, 0);
+ length = min(strcspn(options, " ") + 1,
+ (size_t)(sizeof(device->options)));
+ strlcpy(device->options, options, length);
+ }
+
+ if (mmio || mmio32)
+ pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n",
+ mmio32 ? "32" : "",
+ (unsigned long long)port->mapbase,
+ device->options);
+ else
+ pr_info("Early serial console at I/O port 0x%lx (options '%s')\n",
+ port->iobase,
+ device->options);
+
+ return 0;
+}
+
+int __init setup_earlycon(char *buf, const char *match,
+ int (*setup)(struct earlycon_device *, const char *))
+{
+ int err;
+ size_t len;
+ struct uart_port *port = &early_console_dev.port;
+
+ if (!buf || !match || !setup)
+ return 0;
+
+ len = strlen(match);
+ if (strncmp(buf, match, len))
+ return 0;
+ if (buf[len] && (buf[len] != ','))
+ return 0;
+
+ buf += len + 1;
+
+ err = parse_options(&early_console_dev, buf);
+ /* On parsing error, pass the options buf to the setup function */
+ if (!err)
+ buf = NULL;
+
+ if (port->mapbase)
+ port->membase = earlycon_map(port->mapbase, 64);
+
+ early_console_dev.con->data = &early_console_dev;
+ err = setup(&early_console_dev, buf);
+ if (err < 0)
+ return err;
+ if (!early_console_dev.con->write)
+ return -ENODEV;
+
+ register_console(early_console_dev.con);
+ return 0;
+}
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index c167a710dc39..b373f6416e8c 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -842,6 +842,7 @@ static void __exit efm32_uart_exit(void)
platform_driver_unregister(&efm32_uart_driver);
uart_unregister_driver(&efm32_uart_reg);
}
+module_exit(efm32_uart_exit);
MODULE_AUTHOR("Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>");
MODULE_DESCRIPTION("EFM32 UART/USART driver");
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 3b6c1a2e25de..e2f93874989b 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -116,7 +116,7 @@
#define UCR3_DSR (1<<10) /* Data set ready */
#define UCR3_DCD (1<<9) /* Data carrier detect */
#define UCR3_RI (1<<8) /* Ring indicator */
-#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */
+#define UCR3_ADNIMP (1<<7) /* Autobaud Detection Not Improved */
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
@@ -444,6 +444,10 @@ static void imx_stop_rx(struct uart_port *port)
temp = readl(sport->port.membase + UCR2);
writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2);
+
+ /* disable the `Receiver Ready Interrrupt` */
+ temp = readl(sport->port.membase + UCR1);
+ writel(temp & ~UCR1_RRDYEN, sport->port.membase + UCR1);
}
/*
@@ -1070,7 +1074,7 @@ static void imx_disable_dma(struct imx_port *sport)
static int imx_startup(struct uart_port *port)
{
struct imx_port *sport = (struct imx_port *)port;
- int retval;
+ int retval, i;
unsigned long flags, temp;
retval = clk_prepare_enable(sport->clk_per);
@@ -1098,17 +1102,15 @@ static int imx_startup(struct uart_port *port)
writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
- if (USE_IRDA(sport)) {
- /* reset fifo's and state machines */
- int i = 100;
- temp = readl(sport->port.membase + UCR2);
- temp &= ~UCR2_SRST;
- writel(temp, sport->port.membase + UCR2);
- while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) &&
- (--i > 0)) {
- udelay(1);
- }
- }
+ /* Reset fifo's and state machines */
+ i = 100;
+
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~UCR2_SRST;
+ writel(temp, sport->port.membase + UCR2);
+
+ while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0))
+ udelay(1);
/*
* Allocate the IRQ(s) i.MX1 has three interrupts whereas later
@@ -1163,18 +1165,9 @@ static int imx_startup(struct uart_port *port)
temp |= UCR2_IRTS;
writel(temp, sport->port.membase + UCR2);
- if (USE_IRDA(sport)) {
- /* clear RX-FIFO */
- int i = 64;
- while ((--i > 0) &&
- (readl(sport->port.membase + URXD0) & URXD_CHARRDY)) {
- barrier();
- }
- }
-
if (!is_imx1_uart(sport)) {
temp = readl(sport->port.membase + UCR3);
- temp |= IMX21_UCR3_RXDMUXSEL;
+ temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP;
writel(temp, sport->port.membase + UCR3);
}
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 5f673b7ca50e..cfadf2971b12 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -44,13 +44,22 @@ MODULE_PARM_DESC(magic, "magic sequence to enter NMI debugger (default $3#33)");
static bool kgdb_nmi_tty_enabled;
+static int kgdb_nmi_console_setup(struct console *co, char *options)
+{
+ /* The NMI console uses the dbg_io_ops to issue console messages. To
+ * avoid duplicate messages during kdb sessions we must inform kdb's
+ * I/O utilities that messages sent to the console will automatically
+ * be displayed on the dbg_io.
+ */
+ dbg_io_ops->is_console = true;
+
+ return 0;
+}
+
static void kgdb_nmi_console_write(struct console *co, const char *s, uint c)
{
int i;
- if (!kgdb_nmi_tty_enabled || atomic_read(&kgdb_active) >= 0)
- return;
-
for (i = 0; i < c; i++)
dbg_io_ops->write_char(s[i]);
}
@@ -65,6 +74,7 @@ static struct tty_driver *kgdb_nmi_console_device(struct console *co, int *idx)
static struct console kgdb_nmi_console = {
.name = "ttyNMI",
+ .setup = kgdb_nmi_console_setup,
.write = kgdb_nmi_console_write,
.device = kgdb_nmi_console_device,
.flags = CON_PRINTBUFFER | CON_ANYTIME | CON_ENABLED,
@@ -80,29 +90,10 @@ static struct console kgdb_nmi_console = {
struct kgdb_nmi_tty_priv {
struct tty_port port;
- struct tasklet_struct tlet;
+ struct timer_list timer;
STRUCT_KFIFO(char, KGDB_NMI_FIFO_SIZE) fifo;
};
-static struct kgdb_nmi_tty_priv *kgdb_nmi_port_to_priv(struct tty_port *port)
-{
- return container_of(port, struct kgdb_nmi_tty_priv, port);
-}
-
-/*
- * Our debugging console is polled in a tasklet, so we'll check for input
- * every tick. In HZ-less mode, we should program the next tick. We have
- * to use the lowlevel stuff as no locks should be grabbed.
- */
-#ifdef CONFIG_HIGH_RES_TIMERS
-static void kgdb_tty_poke(void)
-{
- tick_program_event(ktime_get(), 0);
-}
-#else
-static inline void kgdb_tty_poke(void) {}
-#endif
-
static struct tty_port *kgdb_nmi_port;
static void kgdb_tty_recv(int ch)
@@ -113,14 +104,13 @@ static void kgdb_tty_recv(int ch)
if (!kgdb_nmi_port || ch < 0)
return;
/*
- * Can't use port->tty->driver_data as tty might be not there. Tasklet
+ * Can't use port->tty->driver_data as tty might be not there. Timer
* will check for tty and will get the ref, but here we don't have to
* do that, and actually, we can't: we're in NMI context, no locks are
* possible.
*/
- priv = kgdb_nmi_port_to_priv(kgdb_nmi_port);
+ priv = container_of(kgdb_nmi_port, struct kgdb_nmi_tty_priv, port);
kfifo_in(&priv->fifo, &c, 1);
- kgdb_tty_poke();
}
static int kgdb_nmi_poll_one_knock(void)
@@ -204,7 +194,8 @@ static void kgdb_nmi_tty_receiver(unsigned long data)
struct kgdb_nmi_tty_priv *priv = (void *)data;
char ch;
- tasklet_schedule(&priv->tlet);
+ priv->timer.expires = jiffies + (HZ/100);
+ add_timer(&priv->timer);
if (likely(!kgdb_nmi_tty_enabled || !kfifo_len(&priv->fifo)))
return;
@@ -216,18 +207,22 @@ static void kgdb_nmi_tty_receiver(unsigned long data)
static int kgdb_nmi_tty_activate(struct tty_port *port, struct tty_struct *tty)
{
- struct kgdb_nmi_tty_priv *priv = tty->driver_data;
+ struct kgdb_nmi_tty_priv *priv =
+ container_of(port, struct kgdb_nmi_tty_priv, port);
kgdb_nmi_port = port;
- tasklet_schedule(&priv->tlet);
+ priv->timer.expires = jiffies + (HZ/100);
+ add_timer(&priv->timer);
+
return 0;
}
static void kgdb_nmi_tty_shutdown(struct tty_port *port)
{
- struct kgdb_nmi_tty_priv *priv = port->tty->driver_data;
+ struct kgdb_nmi_tty_priv *priv =
+ container_of(port, struct kgdb_nmi_tty_priv, port);
- tasklet_kill(&priv->tlet);
+ del_timer(&priv->timer);
kgdb_nmi_port = NULL;
}
@@ -246,7 +241,7 @@ static int kgdb_nmi_tty_install(struct tty_driver *drv, struct tty_struct *tty)
return -ENOMEM;
INIT_KFIFO(priv->fifo);
- tasklet_init(&priv->tlet, kgdb_nmi_tty_receiver, (unsigned long)priv);
+ setup_timer(&priv->timer, kgdb_nmi_tty_receiver, (unsigned long)priv);
tty_port_init(&priv->port);
priv->port.ops = &kgdb_nmi_tty_port_ops;
tty->driver_data = priv;
diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c
new file mode 100644
index 000000000000..c9d18548783a
--- /dev/null
+++ b/drivers/tty/serial/men_z135_uart.c
@@ -0,0 +1,867 @@
+/*
+ * MEN 16z135 High Speed UART
+ *
+ * Copyright (C) 2014 MEN Mikroelektronik GmbH (www.men.de)
+ * Author: Johannes Thumshirn <johannes.thumshirn@men.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/tty_flip.h>
+#include <linux/bitops.h>
+#include <linux/mcb.h>
+
+#define MEN_Z135_MAX_PORTS 12
+#define MEN_Z135_BASECLK 29491200
+#define MEN_Z135_FIFO_SIZE 1024
+#define MEN_Z135_NUM_MSI_VECTORS 2
+#define MEN_Z135_FIFO_WATERMARK 1020
+
+#define MEN_Z135_STAT_REG 0x0
+#define MEN_Z135_RX_RAM 0x4
+#define MEN_Z135_TX_RAM 0x400
+#define MEN_Z135_RX_CTRL 0x800
+#define MEN_Z135_TX_CTRL 0x804
+#define MEN_Z135_CONF_REG 0x808
+#define MEN_Z135_UART_FREQ 0x80c
+#define MEN_Z135_BAUD_REG 0x810
+#define MENZ135_TIMEOUT 0x814
+
+#define MEN_Z135_MEM_SIZE 0x818
+
+#define IS_IRQ(x) ((x) & 1)
+#define IRQ_ID(x) (((x) >> 1) & 7)
+
+#define MEN_Z135_IER_RXCIEN BIT(0) /* RX Space IRQ */
+#define MEN_Z135_IER_TXCIEN BIT(1) /* TX Space IRQ */
+#define MEN_Z135_IER_RLSIEN BIT(2) /* Receiver Line Status IRQ */
+#define MEN_Z135_IER_MSIEN BIT(3) /* Modem Status IRQ */
+#define MEN_Z135_ALL_IRQS (MEN_Z135_IER_RXCIEN \
+ | MEN_Z135_IER_RLSIEN \
+ | MEN_Z135_IER_MSIEN \
+ | MEN_Z135_IER_TXCIEN)
+
+#define MEN_Z135_MCR_DTR BIT(24)
+#define MEN_Z135_MCR_RTS BIT(25)
+#define MEN_Z135_MCR_OUT1 BIT(26)
+#define MEN_Z135_MCR_OUT2 BIT(27)
+#define MEN_Z135_MCR_LOOP BIT(28)
+#define MEN_Z135_MCR_RCFC BIT(29)
+
+#define MEN_Z135_MSR_DCTS BIT(0)
+#define MEN_Z135_MSR_DDSR BIT(1)
+#define MEN_Z135_MSR_DRI BIT(2)
+#define MEN_Z135_MSR_DDCD BIT(3)
+#define MEN_Z135_MSR_CTS BIT(4)
+#define MEN_Z135_MSR_DSR BIT(5)
+#define MEN_Z135_MSR_RI BIT(6)
+#define MEN_Z135_MSR_DCD BIT(7)
+
+#define MEN_Z135_LCR_SHIFT 8 /* LCR shift mask */
+
+#define MEN_Z135_WL5 0 /* CS5 */
+#define MEN_Z135_WL6 1 /* CS6 */
+#define MEN_Z135_WL7 2 /* CS7 */
+#define MEN_Z135_WL8 3 /* CS8 */
+
+#define MEN_Z135_STB_SHIFT 2 /* Stopbits */
+#define MEN_Z135_NSTB1 0
+#define MEN_Z135_NSTB2 1
+
+#define MEN_Z135_PEN_SHIFT 3 /* Parity enable */
+#define MEN_Z135_PAR_DIS 0
+#define MEN_Z135_PAR_ENA 1
+
+#define MEN_Z135_PTY_SHIFT 4 /* Parity type */
+#define MEN_Z135_PTY_ODD 0
+#define MEN_Z135_PTY_EVN 1
+
+#define MEN_Z135_LSR_DR BIT(0)
+#define MEN_Z135_LSR_OE BIT(1)
+#define MEN_Z135_LSR_PE BIT(2)
+#define MEN_Z135_LSR_FE BIT(3)
+#define MEN_Z135_LSR_BI BIT(4)
+#define MEN_Z135_LSR_THEP BIT(5)
+#define MEN_Z135_LSR_TEXP BIT(6)
+#define MEN_Z135_LSR_RXFIFOERR BIT(7)
+
+#define MEN_Z135_IRQ_ID_MST 0
+#define MEN_Z135_IRQ_ID_TSA 1
+#define MEN_Z135_IRQ_ID_RDA 2
+#define MEN_Z135_IRQ_ID_RLS 3
+#define MEN_Z135_IRQ_ID_CTI 6
+
+#define LCR(x) (((x) >> MEN_Z135_LCR_SHIFT) & 0xff)
+
+#define BYTES_TO_ALIGN(x) ((x) & 0x3)
+
+static int line;
+
+static int txlvl = 5;
+module_param(txlvl, int, S_IRUGO);
+MODULE_PARM_DESC(txlvl, "TX IRQ trigger level 0-7, default 5 (128 byte)");
+
+static int rxlvl = 6;
+module_param(rxlvl, int, S_IRUGO);
+MODULE_PARM_DESC(rxlvl, "RX IRQ trigger level 0-7, default 6 (256 byte)");
+
+static int align;
+module_param(align, int, S_IRUGO);
+MODULE_PARM_DESC(align, "Keep hardware FIFO write pointer aligned, default 0");
+
+struct men_z135_port {
+ struct uart_port port;
+ struct mcb_device *mdev;
+ unsigned char *rxbuf;
+ u32 stat_reg;
+ spinlock_t lock;
+};
+#define to_men_z135(port) container_of((port), struct men_z135_port, port)
+
+/**
+ * men_z135_reg_set() - Set value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to set
+ */
+static inline void men_z135_reg_set(struct men_z135_port *uart,
+ u32 addr, u32 val)
+{
+ struct uart_port *port = &uart->port;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&uart->lock, flags);
+
+ reg = ioread32(port->membase + addr);
+ reg |= val;
+ iowrite32(reg, port->membase + addr);
+
+ spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_reg_clr() - Unset value in register
+ * @uart: The UART port
+ * @addr: Register address
+ * @val: value to clear
+ */
+static inline void men_z135_reg_clr(struct men_z135_port *uart,
+ u32 addr, u32 val)
+{
+ struct uart_port *port = &uart->port;
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&uart->lock, flags);
+
+ reg = ioread32(port->membase + addr);
+ reg &= ~val;
+ iowrite32(reg, port->membase + addr);
+
+ spin_unlock_irqrestore(&uart->lock, flags);
+}
+
+/**
+ * men_z135_handle_modem_status() - Handle change of modem status
+ * @port: The UART port
+ *
+ * Handle change of modem status register. This is done by reading the "delta"
+ * versions of DCD (Data Carrier Detect) and CTS (Clear To Send).
+ */
+static void men_z135_handle_modem_status(struct men_z135_port *uart)
+{
+ if (uart->stat_reg & MEN_Z135_MSR_DDCD)
+ uart_handle_dcd_change(&uart->port,
+ uart->stat_reg & ~MEN_Z135_MSR_DCD);
+ if (uart->stat_reg & MEN_Z135_MSR_DCTS)
+ uart_handle_cts_change(&uart->port,
+ uart->stat_reg & ~MEN_Z135_MSR_CTS);
+}
+
+static void men_z135_handle_lsr(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ u8 lsr;
+
+ lsr = (uart->stat_reg >> 16) & 0xff;
+
+ if (lsr & MEN_Z135_LSR_OE)
+ port->icount.overrun++;
+ if (lsr & MEN_Z135_LSR_PE)
+ port->icount.parity++;
+ if (lsr & MEN_Z135_LSR_FE)
+ port->icount.frame++;
+ if (lsr & MEN_Z135_LSR_BI) {
+ port->icount.brk++;
+ uart_handle_break(port);
+ }
+}
+
+/**
+ * get_rx_fifo_content() - Get the number of bytes in RX FIFO
+ * @uart: The UART port
+ *
+ * Read RXC register from hardware and return current FIFO fill size.
+ */
+static u16 get_rx_fifo_content(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ u32 stat_reg;
+ u16 rxc;
+ u8 rxc_lo;
+ u8 rxc_hi;
+
+ stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+ rxc_lo = stat_reg >> 24;
+ rxc_hi = (stat_reg & 0xC0) >> 6;
+
+ rxc = rxc_lo | (rxc_hi << 8);
+
+ return rxc;
+}
+
+/**
+ * men_z135_handle_rx() - RX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ * Copy from RX FIFO and acknowledge number of bytes copied.
+ */
+static void men_z135_handle_rx(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ struct tty_port *tport = &port->state->port;
+ int copied;
+ u16 size;
+ int room;
+
+ size = get_rx_fifo_content(uart);
+
+ if (size == 0)
+ return;
+
+ /* Avoid accidently accessing TX FIFO instead of RX FIFO. Last
+ * longword in RX FIFO cannot be read.(0x004-0x3FF)
+ */
+ if (size > MEN_Z135_FIFO_WATERMARK)
+ size = MEN_Z135_FIFO_WATERMARK;
+
+ room = tty_buffer_request_room(tport, size);
+ if (room != size)
+ dev_warn(&uart->mdev->dev,
+ "Not enough room in flip buffer, truncating to %d\n",
+ room);
+
+ if (room == 0)
+ return;
+
+ memcpy_fromio(uart->rxbuf, port->membase + MEN_Z135_RX_RAM, room);
+ /* Be sure to first copy all data and then acknowledge it */
+ mb();
+ iowrite32(room, port->membase + MEN_Z135_RX_CTRL);
+
+ copied = tty_insert_flip_string(tport, uart->rxbuf, room);
+ if (copied != room)
+ dev_warn(&uart->mdev->dev,
+ "Only copied %d instead of %d bytes\n",
+ copied, room);
+
+ port->icount.rx += copied;
+
+ tty_flip_buffer_push(tport);
+
+}
+
+/**
+ * men_z135_handle_tx() - TX tasklet routine
+ * @arg: Pointer to struct men_z135_port
+ *
+ */
+static void men_z135_handle_tx(struct men_z135_port *uart)
+{
+ struct uart_port *port = &uart->port;
+ struct circ_buf *xmit = &port->state->xmit;
+ u32 txc;
+ u32 wptr;
+ int qlen;
+ int n;
+ int txfree;
+ int head;
+ int tail;
+ int s;
+
+ if (uart_circ_empty(xmit))
+ goto out;
+
+ if (uart_tx_stopped(port))
+ goto out;
+
+ if (port->x_char)
+ goto out;
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ /* calculate bytes to copy */
+ qlen = uart_circ_chars_pending(xmit);
+ if (qlen <= 0)
+ goto out;
+
+ wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+ txc = (wptr >> 16) & 0x3ff;
+ wptr &= 0x3ff;
+
+ if (txc > MEN_Z135_FIFO_WATERMARK)
+ txc = MEN_Z135_FIFO_WATERMARK;
+
+ txfree = MEN_Z135_FIFO_WATERMARK - txc;
+ if (txfree <= 0) {
+ pr_err("Not enough room in TX FIFO have %d, need %d\n",
+ txfree, qlen);
+ goto irq_en;
+ }
+
+ /* if we're not aligned, it's better to copy only 1 or 2 bytes and
+ * then the rest.
+ */
+ if (align && qlen >= 3 && BYTES_TO_ALIGN(wptr))
+ n = 4 - BYTES_TO_ALIGN(wptr);
+ else if (qlen > txfree)
+ n = txfree;
+ else
+ n = qlen;
+
+ if (n <= 0)
+ goto irq_en;
+
+ head = xmit->head & (UART_XMIT_SIZE - 1);
+ tail = xmit->tail & (UART_XMIT_SIZE - 1);
+
+ s = ((head >= tail) ? head : UART_XMIT_SIZE) - tail;
+ n = min(n, s);
+
+ memcpy_toio(port->membase + MEN_Z135_TX_RAM, &xmit->buf[xmit->tail], n);
+ xmit->tail = (xmit->tail + n) & (UART_XMIT_SIZE - 1);
+ mmiowb();
+
+ iowrite32(n & 0x3ff, port->membase + MEN_Z135_TX_CTRL);
+
+ port->icount.tx += n;
+
+irq_en:
+ if (!uart_circ_empty(xmit))
+ men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+ else
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+
+out:
+ return;
+
+}
+
+/**
+ * men_z135_intr() - Handle legacy IRQs
+ * @irq: The IRQ number
+ * @data: Pointer to UART port
+ *
+ * Check IIR register to see which tasklet to start.
+ */
+static irqreturn_t men_z135_intr(int irq, void *data)
+{
+ struct men_z135_port *uart = (struct men_z135_port *)data;
+ struct uart_port *port = &uart->port;
+ int irq_id;
+
+ uart->stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+ /* IRQ pending is low active */
+ if (IS_IRQ(uart->stat_reg))
+ return IRQ_NONE;
+
+ irq_id = IRQ_ID(uart->stat_reg);
+ switch (irq_id) {
+ case MEN_Z135_IRQ_ID_MST:
+ men_z135_handle_modem_status(uart);
+ break;
+ case MEN_Z135_IRQ_ID_TSA:
+ men_z135_handle_tx(uart);
+ break;
+ case MEN_Z135_IRQ_ID_CTI:
+ dev_dbg(&uart->mdev->dev, "Character Timeout Indication\n");
+ /* Fallthrough */
+ case MEN_Z135_IRQ_ID_RDA:
+ /* Reading data clears RX IRQ */
+ men_z135_handle_rx(uart);
+ break;
+ case MEN_Z135_IRQ_ID_RLS:
+ men_z135_handle_lsr(uart);
+ break;
+ default:
+ dev_warn(&uart->mdev->dev, "Unknown IRQ id %d\n", irq_id);
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * men_z135_request_irq() - Request IRQ for 16z135 core
+ * @uart: z135 private uart port structure
+ *
+ * Request an IRQ for 16z135 to use. First try using MSI, if it fails
+ * fall back to using legacy interrupts.
+ */
+static int men_z135_request_irq(struct men_z135_port *uart)
+{
+ struct device *dev = &uart->mdev->dev;
+ struct uart_port *port = &uart->port;
+ int err = 0;
+
+ err = request_irq(port->irq, men_z135_intr, IRQF_SHARED,
+ "men_z135_intr", uart);
+ if (err)
+ dev_err(dev, "Error %d getting interrupt\n", err);
+
+ return err;
+}
+
+/**
+ * men_z135_tx_empty() - Handle tx_empty call
+ * @port: The UART port
+ *
+ * This function tests whether the TX FIFO and shifter for the port
+ * described by @port is empty.
+ */
+static unsigned int men_z135_tx_empty(struct uart_port *port)
+{
+ u32 wptr;
+ u16 txc;
+
+ wptr = ioread32(port->membase + MEN_Z135_TX_CTRL);
+ txc = (wptr >> 16) & 0x3ff;
+
+ if (txc == 0)
+ return TIOCSER_TEMT;
+ else
+ return 0;
+}
+
+/**
+ * men_z135_set_mctrl() - Set modem control lines
+ * @port: The UART port
+ * @mctrl: The modem control lines
+ *
+ * This function sets the modem control lines for a port described by @port
+ * to the state described by @mctrl
+ */
+static void men_z135_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+ u32 conf_reg = 0;
+
+ if (mctrl & TIOCM_RTS)
+ conf_reg |= MEN_Z135_MCR_RTS;
+ if (mctrl & TIOCM_DTR)
+ conf_reg |= MEN_Z135_MCR_DTR;
+ if (mctrl & TIOCM_OUT1)
+ conf_reg |= MEN_Z135_MCR_OUT1;
+ if (mctrl & TIOCM_OUT2)
+ conf_reg |= MEN_Z135_MCR_OUT2;
+ if (mctrl & TIOCM_LOOP)
+ conf_reg |= MEN_Z135_MCR_LOOP;
+
+ men_z135_reg_set(uart, MEN_Z135_CONF_REG, conf_reg);
+}
+
+/**
+ * men_z135_get_mctrl() - Get modem control lines
+ * @port: The UART port
+ *
+ * Retruns the current state of modem control inputs.
+ */
+static unsigned int men_z135_get_mctrl(struct uart_port *port)
+{
+ unsigned int mctrl = 0;
+ u32 stat_reg;
+ u8 msr;
+
+ stat_reg = ioread32(port->membase + MEN_Z135_STAT_REG);
+
+ msr = ~((stat_reg >> 8) & 0xff);
+
+ if (msr & MEN_Z135_MSR_CTS)
+ mctrl |= TIOCM_CTS;
+ if (msr & MEN_Z135_MSR_DSR)
+ mctrl |= TIOCM_DSR;
+ if (msr & MEN_Z135_MSR_RI)
+ mctrl |= TIOCM_RI;
+ if (msr & MEN_Z135_MSR_DCD)
+ mctrl |= TIOCM_CAR;
+
+ return mctrl;
+}
+
+/**
+ * men_z135_stop_tx() - Stop transmitting characters
+ * @port: The UART port
+ *
+ * Stop transmitting characters. This might be due to CTS line becomming
+ * inactive or the tty layer indicating we want to stop transmission due to
+ * an XOFF character.
+ */
+static void men_z135_stop_tx(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_TXCIEN);
+}
+
+/**
+ * men_z135_start_tx() - Start transmitting characters
+ * @port: The UART port
+ *
+ * Start transmitting character. This actually doesn't transmit anything, but
+ * fires off the TX tasklet.
+ */
+static void men_z135_start_tx(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_handle_tx(uart);
+}
+
+/**
+ * men_z135_stop_rx() - Stop receiving characters
+ * @port: The UART port
+ *
+ * Stop receiving characters; the port is in the process of being closed.
+ */
+static void men_z135_stop_rx(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_RXCIEN);
+}
+
+/**
+ * men_z135_enable_ms() - Enable Modem Status
+ * port:
+ *
+ * Enable Modem Status IRQ.
+ */
+static void men_z135_enable_ms(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+
+ men_z135_reg_set(uart, MEN_Z135_CONF_REG, MEN_Z135_IER_MSIEN);
+}
+
+static int men_z135_startup(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+ int err;
+ u32 conf_reg = 0;
+
+ err = men_z135_request_irq(uart);
+ if (err)
+ return -ENODEV;
+
+ conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+
+ /* Activate all but TX space available IRQ */
+ conf_reg |= MEN_Z135_ALL_IRQS & ~MEN_Z135_IER_TXCIEN;
+ conf_reg &= ~(0xff << 16);
+ conf_reg |= (txlvl << 16);
+ conf_reg |= (rxlvl << 20);
+
+ iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+ return 0;
+}
+
+static void men_z135_shutdown(struct uart_port *port)
+{
+ struct men_z135_port *uart = to_men_z135(port);
+ u32 conf_reg = 0;
+
+ conf_reg |= MEN_Z135_ALL_IRQS;
+
+ men_z135_reg_clr(uart, MEN_Z135_CONF_REG, conf_reg);
+
+ free_irq(uart->port.irq, uart);
+}
+
+static void men_z135_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud;
+ u32 conf_reg;
+ u32 bd_reg;
+ u32 uart_freq;
+ u8 lcr;
+
+ conf_reg = ioread32(port->membase + MEN_Z135_CONF_REG);
+ lcr = LCR(conf_reg);
+
+ /* byte size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr |= MEN_Z135_WL5;
+ break;
+ case CS6:
+ lcr |= MEN_Z135_WL6;
+ break;
+ case CS7:
+ lcr |= MEN_Z135_WL7;
+ break;
+ case CS8:
+ lcr |= MEN_Z135_WL8;
+ break;
+ }
+
+ /* stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= MEN_Z135_NSTB2 << MEN_Z135_STB_SHIFT;
+
+ /* parity */
+ if (termios->c_cflag & PARENB) {
+ lcr |= MEN_Z135_PAR_ENA << MEN_Z135_PEN_SHIFT;
+
+ if (termios->c_cflag & PARODD)
+ lcr |= MEN_Z135_PTY_ODD << MEN_Z135_PTY_SHIFT;
+ else
+ lcr |= MEN_Z135_PTY_EVN << MEN_Z135_PTY_SHIFT;
+ } else
+ lcr |= MEN_Z135_PAR_DIS << MEN_Z135_PEN_SHIFT;
+
+ termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+ conf_reg |= lcr << MEN_Z135_LCR_SHIFT;
+ iowrite32(conf_reg, port->membase + MEN_Z135_CONF_REG);
+
+ uart_freq = ioread32(port->membase + MEN_Z135_UART_FREQ);
+ if (uart_freq == 0)
+ uart_freq = MEN_Z135_BASECLK;
+
+ baud = uart_get_baud_rate(port, termios, old, 0, uart_freq / 16);
+
+ spin_lock(&port->lock);
+ if (tty_termios_baud_rate(termios))
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
+ bd_reg = uart_freq / (4 * baud);
+ iowrite32(bd_reg, port->membase + MEN_Z135_BAUD_REG);
+
+ uart_update_timeout(port, termios->c_cflag, baud);
+ spin_unlock(&port->lock);
+}
+
+static const char *men_z135_type(struct uart_port *port)
+{
+ return KBUILD_MODNAME;
+}
+
+static void men_z135_release_port(struct uart_port *port)
+{
+ iounmap(port->membase);
+ port->membase = NULL;
+
+ release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+}
+
+static int men_z135_request_port(struct uart_port *port)
+{
+ int size = MEN_Z135_MEM_SIZE;
+
+ if (!request_mem_region(port->mapbase, size, "men_z135_port"))
+ return -EBUSY;
+
+ port->membase = ioremap(port->mapbase, MEN_Z135_MEM_SIZE);
+ if (port->membase == NULL) {
+ release_mem_region(port->mapbase, MEN_Z135_MEM_SIZE);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void men_z135_config_port(struct uart_port *port, int type)
+{
+ port->type = PORT_MEN_Z135;
+ men_z135_request_port(port);
+}
+
+static int men_z135_verify_port(struct uart_port *port,
+ struct serial_struct *serinfo)
+{
+ return -EINVAL;
+}
+
+static struct uart_ops men_z135_ops = {
+ .tx_empty = men_z135_tx_empty,
+ .set_mctrl = men_z135_set_mctrl,
+ .get_mctrl = men_z135_get_mctrl,
+ .stop_tx = men_z135_stop_tx,
+ .start_tx = men_z135_start_tx,
+ .stop_rx = men_z135_stop_rx,
+ .enable_ms = men_z135_enable_ms,
+ .startup = men_z135_startup,
+ .shutdown = men_z135_shutdown,
+ .set_termios = men_z135_set_termios,
+ .type = men_z135_type,
+ .release_port = men_z135_release_port,
+ .request_port = men_z135_request_port,
+ .config_port = men_z135_config_port,
+ .verify_port = men_z135_verify_port,
+};
+
+static struct uart_driver men_z135_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = KBUILD_MODNAME,
+ .dev_name = "ttyHSU",
+ .major = 0,
+ .minor = 0,
+ .nr = MEN_Z135_MAX_PORTS,
+};
+
+/**
+ * men_z135_probe() - Probe a z135 instance
+ * @mdev: The MCB device
+ * @id: The MCB device ID
+ *
+ * men_z135_probe does the basic setup of hardware resources and registers the
+ * new uart port to the tty layer.
+ */
+static int men_z135_probe(struct mcb_device *mdev,
+ const struct mcb_device_id *id)
+{
+ struct men_z135_port *uart;
+ struct resource *mem;
+ struct device *dev;
+ int err;
+
+ dev = &mdev->dev;
+
+ uart = devm_kzalloc(dev, sizeof(struct men_z135_port), GFP_KERNEL);
+ if (!uart)
+ return -ENOMEM;
+
+ uart->rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+ if (!uart->rxbuf)
+ return -ENOMEM;
+
+ mem = &mdev->mem;
+
+ mcb_set_drvdata(mdev, uart);
+
+ uart->port.uartclk = MEN_Z135_BASECLK * 16;
+ uart->port.fifosize = MEN_Z135_FIFO_SIZE;
+ uart->port.iotype = UPIO_MEM;
+ uart->port.ops = &men_z135_ops;
+ uart->port.irq = mcb_get_irq(mdev);
+ uart->port.iotype = UPIO_MEM;
+ uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
+ uart->port.line = line++;
+ uart->port.dev = dev;
+ uart->port.type = PORT_MEN_Z135;
+ uart->port.mapbase = mem->start;
+ uart->port.membase = NULL;
+ uart->mdev = mdev;
+
+ spin_lock_init(&uart->port.lock);
+ spin_lock_init(&uart->lock);
+
+ err = uart_add_one_port(&men_z135_driver, &uart->port);
+ if (err)
+ goto err;
+
+ return 0;
+
+err:
+ free_page((unsigned long) uart->rxbuf);
+ dev_err(dev, "Failed to add UART: %d\n", err);
+
+ return err;
+}
+
+/**
+ * men_z135_remove() - Remove a z135 instance from the system
+ *
+ * @mdev: The MCB device
+ */
+static void men_z135_remove(struct mcb_device *mdev)
+{
+ struct men_z135_port *uart = mcb_get_drvdata(mdev);
+
+ line--;
+ uart_remove_one_port(&men_z135_driver, &uart->port);
+ free_page((unsigned long) uart->rxbuf);
+}
+
+static const struct mcb_device_id men_z135_ids[] = {
+ { .device = 0x87 },
+};
+MODULE_DEVICE_TABLE(mcb, men_z135_ids);
+
+static struct mcb_driver mcb_driver = {
+ .driver = {
+ .name = "z135-uart",
+ .owner = THIS_MODULE,
+ },
+ .probe = men_z135_probe,
+ .remove = men_z135_remove,
+ .id_table = men_z135_ids,
+};
+
+/**
+ * men_z135_init() - Driver Registration Routine
+ *
+ * men_z135_init is the first routine called when the driver is loaded. All it
+ * does is register with the legacy MEN Chameleon subsystem.
+ */
+static int __init men_z135_init(void)
+{
+ int err;
+
+ err = uart_register_driver(&men_z135_driver);
+ if (err) {
+ pr_err("Failed to register UART: %d\n", err);
+ return err;
+ }
+
+ err = mcb_register_driver(&mcb_driver);
+ if (err) {
+ pr_err("Failed to register MCB driver: %d\n", err);
+ uart_unregister_driver(&men_z135_driver);
+ return err;
+ }
+
+ return 0;
+}
+module_init(men_z135_init);
+
+/**
+ * men_z135_exit() - Driver Exit Routine
+ *
+ * men_z135_exit is called just before the driver is removed from memory.
+ */
+static void __exit men_z135_exit(void)
+{
+ mcb_unregister_driver(&mcb_driver);
+ uart_unregister_driver(&men_z135_driver);
+}
+module_exit(men_z135_exit);
+
+MODULE_AUTHOR("Johannes Thumshirn <johannes.thumshirn@men.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MEN 16z135 High Speed UART");
+MODULE_ALIAS("mcb:16z135");
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 7fd6aaaacd8e..be127d0da32c 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -29,7 +29,7 @@
#include <asm/irq.h>
#include <asm/parisc-device.h>
-#ifdef CONFIG_MAGIC_SYSRQ
+#if defined(CONFIG_SERIAL_MUX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#include <linux/sysrq.h>
#define SUPPORT_SYSRQ
#endif
@@ -613,7 +613,7 @@ static void __exit mux_exit(void)
{
/* Delete the Mux timer. */
if(port_cnt > 0) {
- del_timer(&mux_timer);
+ del_timer_sync(&mux_timer);
#ifdef CONFIG_SERIAL_MUX_CONSOLE
unregister_console(&mux_console);
#endif
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 99246606a256..68d4455f3cf9 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -173,6 +173,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
{
struct uart_8250_port port8250;
memset(&port8250, 0, sizeof(port8250));
+ port.type = port_type;
port8250.port = port;
if (port.fifosize)
@@ -182,6 +183,10 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
"auto-flow-control"))
port8250.capabilities |= UART_CAP_AFE;
+ if (of_property_read_bool(ofdev->dev.of_node,
+ "has-hw-flow-control"))
+ port8250.port.flags |= UPF_HARD_FLOW;
+
ret = serial8250_register_8250_port(&port8250);
break;
}
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 08b6b9419f0d..d017cec8a34a 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -163,10 +163,6 @@ struct uart_omap_port {
u8 wakeups_enabled;
u32 features;
- int DTR_gpio;
- int DTR_inverted;
- int DTR_active;
-
struct serial_rs485 rs485;
int rts_gpio;
@@ -184,8 +180,6 @@ static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
/* Forward declaration of functions */
static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1);
-static struct workqueue_struct *serial_omap_uart_wq;
-
static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
{
offset <<= up->port.regshift;
@@ -398,11 +392,8 @@ static void transmit_chars(struct uart_omap_port *up, unsigned int lsr)
break;
} while (--count > 0);
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
- spin_unlock(&up->port.lock);
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- spin_lock(&up->port.lock);
- }
if (uart_circ_empty(xmit))
serial_omap_stop_tx(&up->port);
@@ -697,16 +688,6 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
serial_out(up, UART_MCR, up->mcr);
pm_runtime_mark_last_busy(up->dev);
pm_runtime_put_autosuspend(up->dev);
-
- if (gpio_is_valid(up->DTR_gpio) &&
- !!(mctrl & TIOCM_DTR) != up->DTR_active) {
- up->DTR_active = !up->DTR_active;
- if (gpio_cansleep(up->DTR_gpio))
- schedule_work(&up->qos_work);
- else
- gpio_set_value(up->DTR_gpio,
- up->DTR_active != up->DTR_inverted);
- }
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -850,9 +831,6 @@ static void serial_omap_uart_qos_work(struct work_struct *work)
qos_work);
pm_qos_update_request(&up->pm_qos_request, up->latency);
- if (gpio_is_valid(up->DTR_gpio))
- gpio_set_value_cansleep(up->DTR_gpio,
- up->DTR_active != up->DTR_inverted);
}
static void
@@ -1420,7 +1398,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
switch (cmd) {
case TIOCSRS485:
- if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
+ if (copy_from_user(&rs485conf, (void __user *) arg,
sizeof(rs485conf)))
return -EFAULT;
@@ -1428,7 +1406,7 @@ serial_omap_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
break;
case TIOCGRS485:
- if (copy_to_user((struct serial_rs485 *) arg,
+ if (copy_to_user((void __user *) arg,
&(to_uart_omap_port(port)->rs485),
sizeof(rs485conf)))
return -EFAULT;
@@ -1614,7 +1592,7 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
/* check for tx enable gpio */
up->rts_gpio = of_get_named_gpio_flags(np, "rts-gpio", 0, &flags);
if (gpio_is_valid(up->rts_gpio)) {
- ret = gpio_request(up->rts_gpio, "omap-serial");
+ ret = devm_gpio_request(up->dev, up->rts_gpio, "omap-serial");
if (ret < 0)
return ret;
ret = gpio_direction_output(up->rts_gpio,
@@ -1644,10 +1622,13 @@ static int serial_omap_probe_rs485(struct uart_omap_port *up,
static int serial_omap_probe(struct platform_device *pdev)
{
- struct uart_omap_port *up;
- struct resource *mem, *irq;
struct omap_uart_port_info *omap_up_info = dev_get_platdata(&pdev->dev);
- int ret, uartirq = 0, wakeirq = 0;
+ struct uart_omap_port *up;
+ struct resource *mem;
+ void __iomem *base;
+ int uartirq = 0;
+ int wakeirq = 0;
+ int ret;
/* The optional wakeirq may be specified in the board dts file */
if (pdev->dev.of_node) {
@@ -1658,48 +1639,19 @@ static int serial_omap_probe(struct platform_device *pdev)
omap_up_info = of_get_uart_port_info(&pdev->dev);
pdev->dev.platform_data = omap_up_info;
} else {
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq) {
- dev_err(&pdev->dev, "no irq resource?\n");
- return -ENODEV;
- }
- uartirq = irq->start;
- }
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -ENODEV;
- }
-
- if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
- pdev->dev.driver->name)) {
- dev_err(&pdev->dev, "memory region already claimed\n");
- return -EBUSY;
- }
-
- if (gpio_is_valid(omap_up_info->DTR_gpio) &&
- omap_up_info->DTR_present) {
- ret = gpio_request(omap_up_info->DTR_gpio, "omap-serial");
- if (ret < 0)
- return ret;
- ret = gpio_direction_output(omap_up_info->DTR_gpio,
- omap_up_info->DTR_inverted);
- if (ret < 0)
- return ret;
+ uartirq = platform_get_irq(pdev, 0);
+ if (uartirq < 0)
+ return -EPROBE_DEFER;
}
up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
if (!up)
return -ENOMEM;
- if (gpio_is_valid(omap_up_info->DTR_gpio) &&
- omap_up_info->DTR_present) {
- up->DTR_gpio = omap_up_info->DTR_gpio;
- up->DTR_inverted = omap_up_info->DTR_inverted;
- } else
- up->DTR_gpio = -EINVAL;
- up->DTR_active = 0;
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
up->dev = &pdev->dev;
up->port.dev = &pdev->dev;
@@ -1733,14 +1685,7 @@ static int serial_omap_probe(struct platform_device *pdev)
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
- up->port.membase = devm_ioremap(&pdev->dev, mem->start,
- resource_size(mem));
- if (!up->port.membase) {
- dev_err(&pdev->dev, "can't ioremap UART\n");
- ret = -ENOMEM;
- goto err_ioremap;
- }
-
+ up->port.membase = base;
up->port.flags = omap_up_info->flags;
up->port.uartclk = omap_up_info->uartclk;
if (!up->port.uartclk) {
@@ -1754,12 +1699,12 @@ static int serial_omap_probe(struct platform_device *pdev)
up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;
pm_qos_add_request(&up->pm_qos_request,
PM_QOS_CPU_DMA_LATENCY, up->latency);
- serial_omap_uart_wq = create_singlethread_workqueue(up->name);
INIT_WORK(&up->qos_work, serial_omap_uart_qos_work);
platform_set_drvdata(pdev, up);
if (omap_up_info->autosuspend_timeout == 0)
omap_up_info->autosuspend_timeout = -1;
+
device_init_wakeup(up->dev, true);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev,
@@ -1786,7 +1731,6 @@ static int serial_omap_probe(struct platform_device *pdev)
err_add_port:
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
-err_ioremap:
err_rs485:
err_port_line:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 0931b3fe9edf..0cb6a8e52bd0 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -257,6 +257,8 @@ struct eg20t_port {
dma_addr_t rx_buf_dma;
struct dentry *debugfs;
+#define IRQ_NAME_SIZE 17
+ char irq_name[IRQ_NAME_SIZE];
/* protect the eg20t_port private structure and io access to membase */
spinlock_t lock;
@@ -1343,7 +1345,7 @@ static int pch_uart_startup(struct uart_port *port)
return ret;
ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
- KBUILD_MODNAME, priv);
+ priv->irq_name, priv);
if (ret < 0)
return ret;
@@ -1588,13 +1590,8 @@ static void pch_uart_put_poll_char(struct uart_port *port,
wait_for_xmitr(priv, UART_LSR_THRE);
/*
* Send the character out.
- * If a LF, also do CR...
*/
iowrite8(c, priv->membase + PCH_UART_THR);
- if (c == 10) {
- wait_for_xmitr(priv, UART_LSR_THRE);
- iowrite8(13, priv->membase + PCH_UART_THR);
- }
/*
* Finally, wait for transmitter to become empty
@@ -1818,6 +1815,10 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
priv->port.line = board->line_no;
priv->trigger = PCH_UART_HAL_TRIGGER_M;
+ snprintf(priv->irq_name, IRQ_NAME_SIZE,
+ KBUILD_MODNAME ":" PCH_UART_DRIVER_DEVICE "%d",
+ priv->port.line);
+
spin_lock_init(&priv->port.lock);
pci_set_drvdata(pdev, priv);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index f9f20f383760..9e7ee39f8b2a 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -711,13 +711,8 @@ static void serial_pxa_put_poll_char(struct uart_port *port,
wait_for_xmitr(up);
/*
* Send the character out.
- * If a LF, also do CR...
*/
serial_out(up, UART_TX, c);
- if (c == 10) {
- wait_for_xmitr(up);
- serial_out(up, UART_TX, 13);
- }
/*
* Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 1f5505e7f90d..329337711bb0 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -53,6 +53,29 @@
#include "samsung.h"
+#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
+ defined(CONFIG_DEBUG_LL) && \
+ !defined(MODULE)
+
+extern void printascii(const char *);
+
+__printf(1, 2)
+static void dbg(const char *fmt, ...)
+{
+ va_list va;
+ char buff[256];
+
+ va_start(va, fmt);
+ vscnprintf(buff, sizeof(buf), fmt, va);
+ va_end(va);
+
+ printascii(buff);
+}
+
+#else
+#define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
+#endif
+
/* UART name and device definitions */
#define S3C24XX_SERIAL_NAME "ttySAC"
@@ -468,8 +491,8 @@ static int s3c24xx_serial_startup(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
int ret;
- dbg("s3c24xx_serial_startup: port=%p (%08lx,%p)\n",
- port->mapbase, port->membase);
+ dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n",
+ port, (unsigned long long)port->mapbase, port->membase);
rx_enabled(port) = 1;
@@ -514,8 +537,8 @@ static int s3c64xx_serial_startup(struct uart_port *port)
struct s3c24xx_uart_port *ourport = to_ourport(port);
int ret;
- dbg("s3c64xx_serial_startup: port=%p (%08lx,%p)\n",
- port->mapbase, port->membase);
+ dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
+ port, (unsigned long long)port->mapbase, port->membase);
wr_regl(port, S3C64XX_UINTM, 0xf);
@@ -1160,7 +1183,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
return -EINVAL;
}
- dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
+ dbg("resource %pR)\n", res);
port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
if (!port->membase) {
@@ -1203,7 +1226,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
wr_regl(port, S3C64XX_UINTSP, 0xf);
}
- dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n",
+ dbg("port: map=%08x, mem=%p, irq=%d (%d,%d), clock=%u\n",
port->mapbase, port->membase, port->irq,
ourport->rx_irq, ourport->tx_irq, port->uartclk);
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 8827e5424cef..eb071dd19b2d 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -1,3 +1,6 @@
+#ifndef __SAMSUNG_H
+#define __SAMSUNG_H
+
/*
* Driver for Samsung SoC onboard UARTs.
*
@@ -77,24 +80,4 @@ struct s3c24xx_uart_port {
#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
-#if defined(CONFIG_SERIAL_SAMSUNG_DEBUG) && \
- defined(CONFIG_DEBUG_LL) && \
- !defined(MODULE)
-
-extern void printascii(const char *);
-
-static void dbg(const char *fmt, ...)
-{
- va_list va;
- char buff[256];
-
- va_start(va, fmt);
- vsprintf(buff, fmt, va);
- va_end(va);
-
- printascii(buff);
-}
-
-#else
-#define dbg(x...) do { } while (0)
#endif
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
new file mode 100644
index 000000000000..1b6a77c4b2cb
--- /dev/null
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -0,0 +1,1277 @@
+/*
+ * SC16IS7xx tty serial driver - Copyright (C) 2014 GridPoint
+ * Author: Jon Ringle <jringle@gridpoint.com>
+ *
+ * Based on max310x.c, by Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/uaccess.h>
+
+#define SC16IS7XX_NAME "sc16is7xx"
+
+/* SC16IS7XX register definitions */
+#define SC16IS7XX_RHR_REG (0x00) /* RX FIFO */
+#define SC16IS7XX_THR_REG (0x00) /* TX FIFO */
+#define SC16IS7XX_IER_REG (0x01) /* Interrupt enable */
+#define SC16IS7XX_IIR_REG (0x02) /* Interrupt Identification */
+#define SC16IS7XX_FCR_REG (0x02) /* FIFO control */
+#define SC16IS7XX_LCR_REG (0x03) /* Line Control */
+#define SC16IS7XX_MCR_REG (0x04) /* Modem Control */
+#define SC16IS7XX_LSR_REG (0x05) /* Line Status */
+#define SC16IS7XX_MSR_REG (0x06) /* Modem Status */
+#define SC16IS7XX_SPR_REG (0x07) /* Scratch Pad */
+#define SC16IS7XX_TXLVL_REG (0x08) /* TX FIFO level */
+#define SC16IS7XX_RXLVL_REG (0x09) /* RX FIFO level */
+#define SC16IS7XX_IODIR_REG (0x0a) /* I/O Direction
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_IOSTATE_REG (0x0b) /* I/O State
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_IOINTENA_REG (0x0c) /* I/O Interrupt Enable
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_IOCONTROL_REG (0x0e) /* I/O Control
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_EFCR_REG (0x0f) /* Extra Features Control */
+
+/* TCR/TLR Register set: Only if ((MCR[2] == 1) && (EFR[4] == 1)) */
+#define SC16IS7XX_TCR_REG (0x06) /* Transmit control */
+#define SC16IS7XX_TLR_REG (0x07) /* Trigger level */
+
+/* Special Register set: Only if ((LCR[7] == 1) && (LCR != 0xBF)) */
+#define SC16IS7XX_DLL_REG (0x00) /* Divisor Latch Low */
+#define SC16IS7XX_DLH_REG (0x01) /* Divisor Latch High */
+
+/* Enhanced Register set: Only if (LCR == 0xBF) */
+#define SC16IS7XX_EFR_REG (0x02) /* Enhanced Features */
+#define SC16IS7XX_XON1_REG (0x04) /* Xon1 word */
+#define SC16IS7XX_XON2_REG (0x05) /* Xon2 word */
+#define SC16IS7XX_XOFF1_REG (0x06) /* Xoff1 word */
+#define SC16IS7XX_XOFF2_REG (0x07) /* Xoff2 word */
+
+/* IER register bits */
+#define SC16IS7XX_IER_RDI_BIT (1 << 0) /* Enable RX data interrupt */
+#define SC16IS7XX_IER_THRI_BIT (1 << 1) /* Enable TX holding register
+ * interrupt */
+#define SC16IS7XX_IER_RLSI_BIT (1 << 2) /* Enable RX line status
+ * interrupt */
+#define SC16IS7XX_IER_MSI_BIT (1 << 3) /* Enable Modem status
+ * interrupt */
+
+/* IER register bits - write only if (EFR[4] == 1) */
+#define SC16IS7XX_IER_SLEEP_BIT (1 << 4) /* Enable Sleep mode */
+#define SC16IS7XX_IER_XOFFI_BIT (1 << 5) /* Enable Xoff interrupt */
+#define SC16IS7XX_IER_RTSI_BIT (1 << 6) /* Enable nRTS interrupt */
+#define SC16IS7XX_IER_CTSI_BIT (1 << 7) /* Enable nCTS interrupt */
+
+/* FCR register bits */
+#define SC16IS7XX_FCR_FIFO_BIT (1 << 0) /* Enable FIFO */
+#define SC16IS7XX_FCR_RXRESET_BIT (1 << 1) /* Reset RX FIFO */
+#define SC16IS7XX_FCR_TXRESET_BIT (1 << 2) /* Reset TX FIFO */
+#define SC16IS7XX_FCR_RXLVLL_BIT (1 << 6) /* RX Trigger level LSB */
+#define SC16IS7XX_FCR_RXLVLH_BIT (1 << 7) /* RX Trigger level MSB */
+
+/* FCR register bits - write only if (EFR[4] == 1) */
+#define SC16IS7XX_FCR_TXLVLL_BIT (1 << 4) /* TX Trigger level LSB */
+#define SC16IS7XX_FCR_TXLVLH_BIT (1 << 5) /* TX Trigger level MSB */
+
+/* IIR register bits */
+#define SC16IS7XX_IIR_NO_INT_BIT (1 << 0) /* No interrupts pending */
+#define SC16IS7XX_IIR_ID_MASK 0x3e /* Mask for the interrupt ID */
+#define SC16IS7XX_IIR_THRI_SRC 0x02 /* TX holding register empty */
+#define SC16IS7XX_IIR_RDI_SRC 0x04 /* RX data interrupt */
+#define SC16IS7XX_IIR_RLSE_SRC 0x06 /* RX line status error */
+#define SC16IS7XX_IIR_RTOI_SRC 0x0c /* RX time-out interrupt */
+#define SC16IS7XX_IIR_MSI_SRC 0x00 /* Modem status interrupt
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_IIR_INPIN_SRC 0x30 /* Input pin change of state
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_IIR_XOFFI_SRC 0x10 /* Received Xoff */
+#define SC16IS7XX_IIR_CTSRTS_SRC 0x20 /* nCTS,nRTS change of state
+ * from active (LOW)
+ * to inactive (HIGH)
+ */
+/* LCR register bits */
+#define SC16IS7XX_LCR_LENGTH0_BIT (1 << 0) /* Word length bit 0 */
+#define SC16IS7XX_LCR_LENGTH1_BIT (1 << 1) /* Word length bit 1
+ *
+ * Word length bits table:
+ * 00 -> 5 bit words
+ * 01 -> 6 bit words
+ * 10 -> 7 bit words
+ * 11 -> 8 bit words
+ */
+#define SC16IS7XX_LCR_STOPLEN_BIT (1 << 2) /* STOP length bit
+ *
+ * STOP length bit table:
+ * 0 -> 1 stop bit
+ * 1 -> 1-1.5 stop bits if
+ * word length is 5,
+ * 2 stop bits otherwise
+ */
+#define SC16IS7XX_LCR_PARITY_BIT (1 << 3) /* Parity bit enable */
+#define SC16IS7XX_LCR_EVENPARITY_BIT (1 << 4) /* Even parity bit enable */
+#define SC16IS7XX_LCR_FORCEPARITY_BIT (1 << 5) /* 9-bit multidrop parity */
+#define SC16IS7XX_LCR_TXBREAK_BIT (1 << 6) /* TX break enable */
+#define SC16IS7XX_LCR_DLAB_BIT (1 << 7) /* Divisor Latch enable */
+#define SC16IS7XX_LCR_WORD_LEN_5 (0x00)
+#define SC16IS7XX_LCR_WORD_LEN_6 (0x01)
+#define SC16IS7XX_LCR_WORD_LEN_7 (0x02)
+#define SC16IS7XX_LCR_WORD_LEN_8 (0x03)
+#define SC16IS7XX_LCR_CONF_MODE_A SC16IS7XX_LCR_DLAB_BIT /* Special
+ * reg set */
+#define SC16IS7XX_LCR_CONF_MODE_B 0xBF /* Enhanced
+ * reg set */
+
+/* MCR register bits */
+#define SC16IS7XX_MCR_DTR_BIT (1 << 0) /* DTR complement
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MCR_RTS_BIT (1 << 1) /* RTS complement */
+#define SC16IS7XX_MCR_TCRTLR_BIT (1 << 2) /* TCR/TLR register enable */
+#define SC16IS7XX_MCR_LOOP_BIT (1 << 4) /* Enable loopback test mode */
+#define SC16IS7XX_MCR_XONANY_BIT (1 << 5) /* Enable Xon Any
+ * - write enabled
+ * if (EFR[4] == 1)
+ */
+#define SC16IS7XX_MCR_IRDA_BIT (1 << 6) /* Enable IrDA mode
+ * - write enabled
+ * if (EFR[4] == 1)
+ */
+#define SC16IS7XX_MCR_CLKSEL_BIT (1 << 7) /* Divide clock by 4
+ * - write enabled
+ * if (EFR[4] == 1)
+ */
+
+/* LSR register bits */
+#define SC16IS7XX_LSR_DR_BIT (1 << 0) /* Receiver data ready */
+#define SC16IS7XX_LSR_OE_BIT (1 << 1) /* Overrun Error */
+#define SC16IS7XX_LSR_PE_BIT (1 << 2) /* Parity Error */
+#define SC16IS7XX_LSR_FE_BIT (1 << 3) /* Frame Error */
+#define SC16IS7XX_LSR_BI_BIT (1 << 4) /* Break Interrupt */
+#define SC16IS7XX_LSR_BRK_ERROR_MASK 0x1E /* BI, FE, PE, OE bits */
+#define SC16IS7XX_LSR_THRE_BIT (1 << 5) /* TX holding register empty */
+#define SC16IS7XX_LSR_TEMT_BIT (1 << 6) /* Transmitter empty */
+#define SC16IS7XX_LSR_FIFOE_BIT (1 << 7) /* Fifo Error */
+
+/* MSR register bits */
+#define SC16IS7XX_MSR_DCTS_BIT (1 << 0) /* Delta CTS Clear To Send */
+#define SC16IS7XX_MSR_DDSR_BIT (1 << 1) /* Delta DSR Data Set Ready
+ * or (IO4)
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MSR_DRI_BIT (1 << 2) /* Delta RI Ring Indicator
+ * or (IO7)
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MSR_DCD_BIT (1 << 3) /* Delta CD Carrier Detect
+ * or (IO6)
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MSR_CTS_BIT (1 << 0) /* CTS */
+#define SC16IS7XX_MSR_DSR_BIT (1 << 1) /* DSR (IO4)
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MSR_RI_BIT (1 << 2) /* RI (IO7)
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MSR_CD_BIT (1 << 3) /* CD (IO6)
+ * - only on 75x/76x
+ */
+#define SC16IS7XX_MSR_DELTA_MASK 0x0F /* Any of the delta bits! */
+
+/*
+ * TCR register bits
+ * TCR trigger levels are available from 0 to 60 characters with a granularity
+ * of four.
+ * The programmer must program the TCR such that TCR[3:0] > TCR[7:4]. There is
+ * no built-in hardware check to make sure this condition is met. Also, the TCR
+ * must be programmed with this condition before auto RTS or software flow
+ * control is enabled to avoid spurious operation of the device.
+ */
+#define SC16IS7XX_TCR_RX_HALT(words) ((((words) / 4) & 0x0f) << 0)
+#define SC16IS7XX_TCR_RX_RESUME(words) ((((words) / 4) & 0x0f) << 4)
+
+/*
+ * TLR register bits
+ * If TLR[3:0] or TLR[7:4] are logical 0, the selectable trigger levels via the
+ * FIFO Control Register (FCR) are used for the transmit and receive FIFO
+ * trigger levels. Trigger levels from 4 characters to 60 characters are
+ * available with a granularity of four.
+ *
+ * When the trigger level setting in TLR is zero, the SC16IS740/750/760 uses the
+ * trigger level setting defined in FCR. If TLR has non-zero trigger level value
+ * the trigger level defined in FCR is discarded. This applies to both transmit
+ * FIFO and receive FIFO trigger level setting.
+ *
+ * When TLR is used for RX trigger level control, FCR[7:6] should be left at the
+ * default state, that is, '00'.
+ */
+#define SC16IS7XX_TLR_TX_TRIGGER(words) ((((words) / 4) & 0x0f) << 0)
+#define SC16IS7XX_TLR_RX_TRIGGER(words) ((((words) / 4) & 0x0f) << 4)
+
+/* IOControl register bits (Only 750/760) */
+#define SC16IS7XX_IOCONTROL_LATCH_BIT (1 << 0) /* Enable input latching */
+#define SC16IS7XX_IOCONTROL_GPIO_BIT (1 << 1) /* Enable GPIO[7:4] */
+#define SC16IS7XX_IOCONTROL_SRESET_BIT (1 << 3) /* Software Reset */
+
+/* EFCR register bits */
+#define SC16IS7XX_EFCR_9BIT_MODE_BIT (1 << 0) /* Enable 9-bit or Multidrop
+ * mode (RS485) */
+#define SC16IS7XX_EFCR_RXDISABLE_BIT (1 << 1) /* Disable receiver */
+#define SC16IS7XX_EFCR_TXDISABLE_BIT (1 << 2) /* Disable transmitter */
+#define SC16IS7XX_EFCR_AUTO_RS485_BIT (1 << 4) /* Auto RS485 RTS direction */
+#define SC16IS7XX_EFCR_RTS_INVERT_BIT (1 << 5) /* RTS output inversion */
+#define SC16IS7XX_EFCR_IRDA_MODE_BIT (1 << 7) /* IrDA mode
+ * 0 = rate upto 115.2 kbit/s
+ * - Only 750/760
+ * 1 = rate upto 1.152 Mbit/s
+ * - Only 760
+ */
+
+/* EFR register bits */
+#define SC16IS7XX_EFR_AUTORTS_BIT (1 << 6) /* Auto RTS flow ctrl enable */
+#define SC16IS7XX_EFR_AUTOCTS_BIT (1 << 7) /* Auto CTS flow ctrl enable */
+#define SC16IS7XX_EFR_XOFF2_DETECT_BIT (1 << 5) /* Enable Xoff2 detection */
+#define SC16IS7XX_EFR_ENABLE_BIT (1 << 4) /* Enable enhanced functions
+ * and writing to IER[7:4],
+ * FCR[5:4], MCR[7:5]
+ */
+#define SC16IS7XX_EFR_SWFLOW3_BIT (1 << 3) /* SWFLOW bit 3 */
+#define SC16IS7XX_EFR_SWFLOW2_BIT (1 << 2) /* SWFLOW bit 2
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no transmitter flow
+ * control
+ * 01 -> transmitter generates
+ * XON2 and XOFF2
+ * 10 -> transmitter generates
+ * XON1 and XOFF1
+ * 11 -> transmitter generates
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+#define SC16IS7XX_EFR_SWFLOW1_BIT (1 << 1) /* SWFLOW bit 2 */
+#define SC16IS7XX_EFR_SWFLOW0_BIT (1 << 0) /* SWFLOW bit 3
+ *
+ * SWFLOW bits 3 & 2 table:
+ * 00 -> no received flow
+ * control
+ * 01 -> receiver compares
+ * XON2 and XOFF2
+ * 10 -> receiver compares
+ * XON1 and XOFF1
+ * 11 -> receiver compares
+ * XON1, XON2, XOFF1 and
+ * XOFF2
+ */
+
+/* Misc definitions */
+#define SC16IS7XX_FIFO_SIZE (64)
+#define SC16IS7XX_REG_SHIFT 2
+
+struct sc16is7xx_devtype {
+ char name[10];
+ int nr_gpio;
+ int nr_uart;
+};
+
+struct sc16is7xx_one {
+ struct uart_port port;
+ struct work_struct tx_work;
+ struct work_struct md_work;
+
+ struct serial_rs485 rs485;
+};
+
+struct sc16is7xx_port {
+ struct uart_driver uart;
+ struct sc16is7xx_devtype *devtype;
+ struct regmap *regmap;
+ struct mutex mutex;
+ struct clk *clk;
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gpio;
+#endif
+ unsigned char buf[SC16IS7XX_FIFO_SIZE];
+ struct sc16is7xx_one p[0];
+};
+
+#define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e)))
+
+static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ unsigned int val = 0;
+
+ regmap_read(s->regmap,
+ (reg << SC16IS7XX_REG_SHIFT) | port->line, &val);
+
+ return val;
+}
+
+static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+ regmap_write(s->regmap,
+ (reg << SC16IS7XX_REG_SHIFT) | port->line, val);
+}
+
+static void sc16is7xx_port_update(struct uart_port *port, u8 reg,
+ u8 mask, u8 val)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+ regmap_update_bits(s->regmap,
+ (reg << SC16IS7XX_REG_SHIFT) | port->line,
+ mask, val);
+}
+
+
+static void sc16is7xx_power(struct uart_port *port, int on)
+{
+ sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+ SC16IS7XX_IER_SLEEP_BIT,
+ on ? 0 : SC16IS7XX_IER_SLEEP_BIT);
+}
+
+static const struct sc16is7xx_devtype sc16is74x_devtype = {
+ .name = "SC16IS74X",
+ .nr_gpio = 0,
+ .nr_uart = 1,
+};
+
+static const struct sc16is7xx_devtype sc16is750_devtype = {
+ .name = "SC16IS750",
+ .nr_gpio = 8,
+ .nr_uart = 1,
+};
+
+static const struct sc16is7xx_devtype sc16is752_devtype = {
+ .name = "SC16IS752",
+ .nr_gpio = 8,
+ .nr_uart = 2,
+};
+
+static const struct sc16is7xx_devtype sc16is760_devtype = {
+ .name = "SC16IS760",
+ .nr_gpio = 8,
+ .nr_uart = 1,
+};
+
+static const struct sc16is7xx_devtype sc16is762_devtype = {
+ .name = "SC16IS762",
+ .nr_gpio = 8,
+ .nr_uart = 2,
+};
+
+static bool sc16is7xx_regmap_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg >> SC16IS7XX_REG_SHIFT) {
+ case SC16IS7XX_RHR_REG:
+ case SC16IS7XX_IIR_REG:
+ case SC16IS7XX_LSR_REG:
+ case SC16IS7XX_MSR_REG:
+ case SC16IS7XX_TXLVL_REG:
+ case SC16IS7XX_RXLVL_REG:
+ case SC16IS7XX_IOSTATE_REG:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static bool sc16is7xx_regmap_precious(struct device *dev, unsigned int reg)
+{
+ switch (reg >> SC16IS7XX_REG_SHIFT) {
+ case SC16IS7XX_RHR_REG:
+ return true;
+ default:
+ break;
+ }
+
+ return false;
+}
+
+static int sc16is7xx_set_baud(struct uart_port *port, int baud)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ u8 lcr;
+ u8 prescaler = 0;
+ unsigned long clk = port->uartclk, div = clk / 16 / baud;
+
+ if (div > 0xffff) {
+ prescaler = SC16IS7XX_MCR_CLKSEL_BIT;
+ div /= 4;
+ }
+
+ lcr = sc16is7xx_port_read(port, SC16IS7XX_LCR_REG);
+
+ /* Open the LCR divisors for configuration */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+ SC16IS7XX_LCR_CONF_MODE_B);
+
+ /* Enable enhanced features */
+ regcache_cache_bypass(s->regmap, true);
+ sc16is7xx_port_write(port, SC16IS7XX_EFR_REG,
+ SC16IS7XX_EFR_ENABLE_BIT);
+ regcache_cache_bypass(s->regmap, false);
+
+ /* Put LCR back to the normal mode */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+ sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+ SC16IS7XX_MCR_CLKSEL_BIT,
+ prescaler);
+
+ /* Open the LCR divisors for configuration */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+ SC16IS7XX_LCR_CONF_MODE_A);
+
+ /* Write the new divisor */
+ regcache_cache_bypass(s->regmap, true);
+ sc16is7xx_port_write(port, SC16IS7XX_DLH_REG, div / 256);
+ sc16is7xx_port_write(port, SC16IS7XX_DLL_REG, div % 256);
+ regcache_cache_bypass(s->regmap, false);
+
+ /* Put LCR back to the normal mode */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+ return DIV_ROUND_CLOSEST(clk / 16, div);
+}
+
+static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
+ unsigned int iir)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ unsigned int lsr = 0, ch, flag, bytes_read, i;
+ bool read_lsr = (iir == SC16IS7XX_IIR_RLSE_SRC) ? true : false;
+
+ if (unlikely(rxlen >= sizeof(s->buf))) {
+ dev_warn_ratelimited(port->dev,
+ "Port %i: Possible RX FIFO overrun: %d\n",
+ port->line, rxlen);
+ port->icount.buf_overrun++;
+ /* Ensure sanity of RX level */
+ rxlen = sizeof(s->buf);
+ }
+
+ while (rxlen) {
+ /* Only read lsr if there are possible errors in FIFO */
+ if (read_lsr) {
+ lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+ if (!(lsr & SC16IS7XX_LSR_FIFOE_BIT))
+ read_lsr = false; /* No errors left in FIFO */
+ } else
+ lsr = 0;
+
+ if (read_lsr) {
+ s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG);
+ bytes_read = 1;
+ } else {
+ regcache_cache_bypass(s->regmap, true);
+ regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG,
+ s->buf, rxlen);
+ regcache_cache_bypass(s->regmap, false);
+ bytes_read = rxlen;
+ }
+
+ lsr &= SC16IS7XX_LSR_BRK_ERROR_MASK;
+
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+
+ if (unlikely(lsr)) {
+ if (lsr & SC16IS7XX_LSR_BI_BIT) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ } else if (lsr & SC16IS7XX_LSR_PE_BIT)
+ port->icount.parity++;
+ else if (lsr & SC16IS7XX_LSR_FE_BIT)
+ port->icount.frame++;
+ else if (lsr & SC16IS7XX_LSR_OE_BIT)
+ port->icount.overrun++;
+
+ lsr &= port->read_status_mask;
+ if (lsr & SC16IS7XX_LSR_BI_BIT)
+ flag = TTY_BREAK;
+ else if (lsr & SC16IS7XX_LSR_PE_BIT)
+ flag = TTY_PARITY;
+ else if (lsr & SC16IS7XX_LSR_FE_BIT)
+ flag = TTY_FRAME;
+ else if (lsr & SC16IS7XX_LSR_OE_BIT)
+ flag = TTY_OVERRUN;
+ }
+
+ for (i = 0; i < bytes_read; ++i) {
+ ch = s->buf[i];
+ if (uart_handle_sysrq_char(port, ch))
+ continue;
+
+ if (lsr & port->ignore_status_mask)
+ continue;
+
+ uart_insert_char(port, lsr, SC16IS7XX_LSR_OE_BIT, ch,
+ flag);
+ }
+ rxlen -= bytes_read;
+ }
+
+ tty_flip_buffer_push(&port->state->port);
+}
+
+static void sc16is7xx_handle_tx(struct uart_port *port)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ struct circ_buf *xmit = &port->state->xmit;
+ unsigned int txlen, to_send, i;
+
+ if (unlikely(port->x_char)) {
+ sc16is7xx_port_write(port, SC16IS7XX_THR_REG, port->x_char);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port))
+ return;
+
+ /* Get length of data pending in circular buffer */
+ to_send = uart_circ_chars_pending(xmit);
+ if (likely(to_send)) {
+ /* Limit to size of TX FIFO */
+ txlen = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+ to_send = (to_send > txlen) ? txlen : to_send;
+
+ /* Add data to send */
+ port->icount.tx += to_send;
+
+ /* Convert to linear buffer */
+ for (i = 0; i < to_send; ++i) {
+ s->buf[i] = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ }
+ regcache_cache_bypass(s->regmap, true);
+ regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send);
+ regcache_cache_bypass(s->regmap, false);
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno)
+{
+ struct uart_port *port = &s->p[portno].port;
+
+ do {
+ unsigned int iir, msr, rxlen;
+
+ iir = sc16is7xx_port_read(port, SC16IS7XX_IIR_REG);
+ if (iir & SC16IS7XX_IIR_NO_INT_BIT)
+ break;
+
+ iir &= SC16IS7XX_IIR_ID_MASK;
+
+ switch (iir) {
+ case SC16IS7XX_IIR_RDI_SRC:
+ case SC16IS7XX_IIR_RLSE_SRC:
+ case SC16IS7XX_IIR_RTOI_SRC:
+ case SC16IS7XX_IIR_XOFFI_SRC:
+ rxlen = sc16is7xx_port_read(port, SC16IS7XX_RXLVL_REG);
+ if (rxlen)
+ sc16is7xx_handle_rx(port, rxlen, iir);
+ break;
+
+ case SC16IS7XX_IIR_CTSRTS_SRC:
+ msr = sc16is7xx_port_read(port, SC16IS7XX_MSR_REG);
+ uart_handle_cts_change(port,
+ !!(msr & SC16IS7XX_MSR_CTS_BIT));
+ break;
+ case SC16IS7XX_IIR_THRI_SRC:
+ mutex_lock(&s->mutex);
+ sc16is7xx_handle_tx(port);
+ mutex_unlock(&s->mutex);
+ break;
+ default:
+ dev_err_ratelimited(port->dev,
+ "Port %i: Unexpected interrupt: %x",
+ port->line, iir);
+ break;
+ }
+ } while (1);
+}
+
+static irqreturn_t sc16is7xx_ist(int irq, void *dev_id)
+{
+ struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id;
+ int i;
+
+ for (i = 0; i < s->uart.nr; ++i)
+ sc16is7xx_port_irq(s, i);
+
+ return IRQ_HANDLED;
+}
+
+static void sc16is7xx_wq_proc(struct work_struct *ws)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work);
+ struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev);
+
+ mutex_lock(&s->mutex);
+ sc16is7xx_handle_tx(&one->port);
+ mutex_unlock(&s->mutex);
+}
+
+static void sc16is7xx_stop_tx(struct uart_port* port)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+ struct circ_buf *xmit = &one->port.state->xmit;
+
+ /* handle rs485 */
+ if (one->rs485.flags & SER_RS485_ENABLED) {
+ /* do nothing if current tx not yet completed */
+ int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+ if (!(lsr & SC16IS7XX_LSR_TEMT_BIT))
+ return;
+
+ if (uart_circ_empty(xmit) &&
+ (one->rs485.delay_rts_after_send > 0))
+ mdelay(one->rs485.delay_rts_after_send);
+ }
+
+ sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+ SC16IS7XX_IER_THRI_BIT,
+ 0);
+}
+
+static void sc16is7xx_stop_rx(struct uart_port* port)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+ one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT;
+ sc16is7xx_port_update(port, SC16IS7XX_IER_REG,
+ SC16IS7XX_LSR_DR_BIT,
+ 0);
+}
+
+static void sc16is7xx_start_tx(struct uart_port *port)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+ /* handle rs485 */
+ if ((one->rs485.flags & SER_RS485_ENABLED) &&
+ (one->rs485.delay_rts_before_send > 0)) {
+ mdelay(one->rs485.delay_rts_before_send);
+ }
+
+ if (!work_pending(&one->tx_work))
+ schedule_work(&one->tx_work);
+}
+
+static unsigned int sc16is7xx_tx_empty(struct uart_port *port)
+{
+ unsigned int lvl, lsr;
+
+ lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG);
+ lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG);
+
+ return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int sc16is7xx_get_mctrl(struct uart_port *port)
+{
+ /* DCD and DSR are not wired and CTS/RTS is handled automatically
+ * so just indicate DSR and CAR asserted
+ */
+ return TIOCM_DSR | TIOCM_CAR;
+}
+
+static void sc16is7xx_md_proc(struct work_struct *ws)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work);
+
+ sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG,
+ SC16IS7XX_MCR_LOOP_BIT,
+ (one->port.mctrl & TIOCM_LOOP) ?
+ SC16IS7XX_MCR_LOOP_BIT : 0);
+}
+
+static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+ schedule_work(&one->md_work);
+}
+
+static void sc16is7xx_break_ctl(struct uart_port *port, int break_state)
+{
+ sc16is7xx_port_update(port, SC16IS7XX_LCR_REG,
+ SC16IS7XX_LCR_TXBREAK_BIT,
+ break_state ? SC16IS7XX_LCR_TXBREAK_BIT : 0);
+}
+
+static void sc16is7xx_set_termios(struct uart_port *port,
+ struct ktermios *termios,
+ struct ktermios *old)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ unsigned int lcr, flow = 0;
+ int baud;
+
+ /* Mask termios capabilities we don't support */
+ termios->c_cflag &= ~CMSPAR;
+
+ /* Word size */
+ switch (termios->c_cflag & CSIZE) {
+ case CS5:
+ lcr = SC16IS7XX_LCR_WORD_LEN_5;
+ break;
+ case CS6:
+ lcr = SC16IS7XX_LCR_WORD_LEN_6;
+ break;
+ case CS7:
+ lcr = SC16IS7XX_LCR_WORD_LEN_7;
+ break;
+ case CS8:
+ lcr = SC16IS7XX_LCR_WORD_LEN_8;
+ break;
+ default:
+ lcr = SC16IS7XX_LCR_WORD_LEN_8;
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= CS8;
+ break;
+ }
+
+ /* Parity */
+ if (termios->c_cflag & PARENB) {
+ lcr |= SC16IS7XX_LCR_PARITY_BIT;
+ if (!(termios->c_cflag & PARODD))
+ lcr |= SC16IS7XX_LCR_EVENPARITY_BIT;
+ }
+
+ /* Stop bits */
+ if (termios->c_cflag & CSTOPB)
+ lcr |= SC16IS7XX_LCR_STOPLEN_BIT; /* 2 stops */
+
+ /* Set read status mask */
+ port->read_status_mask = SC16IS7XX_LSR_OE_BIT;
+ if (termios->c_iflag & INPCK)
+ port->read_status_mask |= SC16IS7XX_LSR_PE_BIT |
+ SC16IS7XX_LSR_FE_BIT;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ port->read_status_mask |= SC16IS7XX_LSR_BI_BIT;
+
+ /* Set status ignore mask */
+ port->ignore_status_mask = 0;
+ if (termios->c_iflag & IGNBRK)
+ port->ignore_status_mask |= SC16IS7XX_LSR_BI_BIT;
+ if (!(termios->c_cflag & CREAD))
+ port->ignore_status_mask |= SC16IS7XX_LSR_BRK_ERROR_MASK;
+
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+ SC16IS7XX_LCR_CONF_MODE_B);
+
+ /* Configure flow control */
+ regcache_cache_bypass(s->regmap, true);
+ sc16is7xx_port_write(port, SC16IS7XX_XON1_REG, termios->c_cc[VSTART]);
+ sc16is7xx_port_write(port, SC16IS7XX_XOFF1_REG, termios->c_cc[VSTOP]);
+ if (termios->c_cflag & CRTSCTS)
+ flow |= SC16IS7XX_EFR_AUTOCTS_BIT |
+ SC16IS7XX_EFR_AUTORTS_BIT;
+ if (termios->c_iflag & IXON)
+ flow |= SC16IS7XX_EFR_SWFLOW3_BIT;
+ if (termios->c_iflag & IXOFF)
+ flow |= SC16IS7XX_EFR_SWFLOW1_BIT;
+
+ sc16is7xx_port_write(port, SC16IS7XX_EFR_REG, flow);
+ regcache_cache_bypass(s->regmap, false);
+
+ /* Update LCR register */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, lcr);
+
+ /* Get baud rate generator configuration */
+ baud = uart_get_baud_rate(port, termios, old,
+ port->uartclk / 16 / 4 / 0xffff,
+ port->uartclk / 16);
+
+ /* Setup baudrate generator */
+ baud = sc16is7xx_set_baud(port, baud);
+
+ /* Update timeout according to new baud rate */
+ uart_update_timeout(port, termios->c_cflag, baud);
+}
+
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+static void sc16is7xx_config_rs485(struct uart_port *port,
+ struct serial_rs485 *rs485)
+{
+ struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
+
+ one->rs485 = *rs485;
+
+ if (one->rs485.flags & SER_RS485_ENABLED) {
+ sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+ SC16IS7XX_EFCR_AUTO_RS485_BIT,
+ SC16IS7XX_EFCR_AUTO_RS485_BIT);
+ } else {
+ sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+ SC16IS7XX_EFCR_AUTO_RS485_BIT,
+ 0);
+ }
+}
+#endif
+
+static int sc16is7xx_ioctl(struct uart_port *port, unsigned int cmd,
+ unsigned long arg)
+{
+#if defined(TIOCSRS485) && defined(TIOCGRS485)
+ struct serial_rs485 rs485;
+
+ switch (cmd) {
+ case TIOCSRS485:
+ if (copy_from_user(&rs485, (void __user *)arg, sizeof(rs485)))
+ return -EFAULT;
+
+ sc16is7xx_config_rs485(port, &rs485);
+ return 0;
+ case TIOCGRS485:
+ if (copy_to_user((void __user *)arg,
+ &(to_sc16is7xx_one(port, port)->rs485),
+ sizeof(rs485)))
+ return -EFAULT;
+ return 0;
+ default:
+ break;
+ }
+#endif
+
+ return -ENOIOCTLCMD;
+}
+
+static int sc16is7xx_startup(struct uart_port *port)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+ unsigned int val;
+
+ sc16is7xx_power(port, 1);
+
+ /* Reset FIFOs*/
+ val = SC16IS7XX_FCR_RXRESET_BIT | SC16IS7XX_FCR_TXRESET_BIT;
+ sc16is7xx_port_write(port, SC16IS7XX_FCR_REG, val);
+ udelay(5);
+ sc16is7xx_port_write(port, SC16IS7XX_FCR_REG,
+ SC16IS7XX_FCR_FIFO_BIT);
+
+ /* Enable EFR */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG,
+ SC16IS7XX_LCR_CONF_MODE_B);
+
+ regcache_cache_bypass(s->regmap, true);
+
+ /* Enable write access to enhanced features and internal clock div */
+ sc16is7xx_port_write(port, SC16IS7XX_EFR_REG,
+ SC16IS7XX_EFR_ENABLE_BIT);
+
+ /* Enable TCR/TLR */
+ sc16is7xx_port_update(port, SC16IS7XX_MCR_REG,
+ SC16IS7XX_MCR_TCRTLR_BIT,
+ SC16IS7XX_MCR_TCRTLR_BIT);
+
+ /* Configure flow control levels */
+ /* Flow control halt level 48, resume level 24 */
+ sc16is7xx_port_write(port, SC16IS7XX_TCR_REG,
+ SC16IS7XX_TCR_RX_RESUME(24) |
+ SC16IS7XX_TCR_RX_HALT(48));
+
+ regcache_cache_bypass(s->regmap, false);
+
+ /* Now, initialize the UART */
+ sc16is7xx_port_write(port, SC16IS7XX_LCR_REG, SC16IS7XX_LCR_WORD_LEN_8);
+
+ /* Enable the Rx and Tx FIFO */
+ sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG,
+ SC16IS7XX_EFCR_RXDISABLE_BIT |
+ SC16IS7XX_EFCR_TXDISABLE_BIT,
+ 0);
+
+ /* Enable RX, TX, CTS change interrupts */
+ val = SC16IS7XX_IER_RDI_BIT | SC16IS7XX_IER_THRI_BIT |
+ SC16IS7XX_IER_CTSI_BIT;
+ sc16is7xx_port_write(port, SC16IS7XX_IER_REG, val);
+
+ return 0;
+}
+
+static void sc16is7xx_shutdown(struct uart_port *port)
+{
+ /* Disable all interrupts */
+ sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0);
+ /* Disable TX/RX */
+ sc16is7xx_port_write(port, SC16IS7XX_EFCR_REG,
+ SC16IS7XX_EFCR_RXDISABLE_BIT |
+ SC16IS7XX_EFCR_TXDISABLE_BIT);
+
+ sc16is7xx_power(port, 0);
+}
+
+static const char *sc16is7xx_type(struct uart_port *port)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+
+ return (port->type == PORT_SC16IS7XX) ? s->devtype->name : NULL;
+}
+
+static int sc16is7xx_request_port(struct uart_port *port)
+{
+ /* Do nothing */
+ return 0;
+}
+
+static void sc16is7xx_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_SC16IS7XX;
+}
+
+static int sc16is7xx_verify_port(struct uart_port *port,
+ struct serial_struct *s)
+{
+ if ((s->type != PORT_UNKNOWN) && (s->type != PORT_SC16IS7XX))
+ return -EINVAL;
+ if (s->irq != port->irq)
+ return -EINVAL;
+
+ return 0;
+}
+
+static void sc16is7xx_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ sc16is7xx_power(port, (state == UART_PM_STATE_ON) ? 1 : 0);
+}
+
+static void sc16is7xx_null_void(struct uart_port *port)
+{
+ /* Do nothing */
+}
+
+static const struct uart_ops sc16is7xx_ops = {
+ .tx_empty = sc16is7xx_tx_empty,
+ .set_mctrl = sc16is7xx_set_mctrl,
+ .get_mctrl = sc16is7xx_get_mctrl,
+ .stop_tx = sc16is7xx_stop_tx,
+ .start_tx = sc16is7xx_start_tx,
+ .stop_rx = sc16is7xx_stop_rx,
+ .enable_ms = sc16is7xx_null_void,
+ .break_ctl = sc16is7xx_break_ctl,
+ .startup = sc16is7xx_startup,
+ .shutdown = sc16is7xx_shutdown,
+ .set_termios = sc16is7xx_set_termios,
+ .type = sc16is7xx_type,
+ .request_port = sc16is7xx_request_port,
+ .release_port = sc16is7xx_null_void,
+ .config_port = sc16is7xx_config_port,
+ .verify_port = sc16is7xx_verify_port,
+ .ioctl = sc16is7xx_ioctl,
+ .pm = sc16is7xx_pm,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int sc16is7xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ unsigned int val;
+ struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+ gpio);
+ struct uart_port *port = &s->p[0].port;
+
+ val = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG);
+
+ return !!(val & BIT(offset));
+}
+
+static void sc16is7xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+ gpio);
+ struct uart_port *port = &s->p[0].port;
+
+ sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
+ val ? BIT(offset) : 0);
+}
+
+static int sc16is7xx_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+ gpio);
+ struct uart_port *port = &s->p[0].port;
+
+ sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset), 0);
+
+ return 0;
+}
+
+static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int val)
+{
+ struct sc16is7xx_port *s = container_of(chip, struct sc16is7xx_port,
+ gpio);
+ struct uart_port *port = &s->p[0].port;
+
+ sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
+ val ? BIT(offset) : 0);
+ sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
+ BIT(offset));
+
+ return 0;
+}
+#endif
+
+static int sc16is7xx_probe(struct device *dev,
+ struct sc16is7xx_devtype *devtype,
+ struct regmap *regmap, int irq, unsigned long flags)
+{
+ unsigned long freq, *pfreq = dev_get_platdata(dev);
+ struct clk *clk;
+ int i, ret;
+ struct sc16is7xx_port *s;
+
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ /* Alloc port structure */
+ s = devm_kzalloc(dev, sizeof(*s) +
+ sizeof(struct sc16is7xx_one) * devtype->nr_uart,
+ GFP_KERNEL);
+ if (!s) {
+ dev_err(dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+
+ clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(clk)) {
+ if (pfreq)
+ freq = *pfreq;
+ else
+ return PTR_ERR(clk);
+ } else {
+ freq = clk_get_rate(clk);
+ }
+
+ s->regmap = regmap;
+ s->devtype = devtype;
+ dev_set_drvdata(dev, s);
+
+ /* Register UART driver */
+ s->uart.owner = THIS_MODULE;
+ s->uart.dev_name = "ttySC";
+ s->uart.nr = devtype->nr_uart;
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(dev, "Registering UART driver failed\n");
+ goto out_clk;
+ }
+
+#ifdef CONFIG_GPIOLIB
+ if (devtype->nr_gpio) {
+ /* Setup GPIO cotroller */
+ s->gpio.owner = THIS_MODULE;
+ s->gpio.dev = dev;
+ s->gpio.label = dev_name(dev);
+ s->gpio.direction_input = sc16is7xx_gpio_direction_input;
+ s->gpio.get = sc16is7xx_gpio_get;
+ s->gpio.direction_output = sc16is7xx_gpio_direction_output;
+ s->gpio.set = sc16is7xx_gpio_set;
+ s->gpio.base = -1;
+ s->gpio.ngpio = devtype->nr_gpio;
+ s->gpio.can_sleep = 1;
+ ret = gpiochip_add(&s->gpio);
+ if (ret)
+ goto out_uart;
+ }
+#endif
+
+ mutex_init(&s->mutex);
+
+ for (i = 0; i < devtype->nr_uart; ++i) {
+ /* Initialize port data */
+ s->p[i].port.line = i;
+ s->p[i].port.dev = dev;
+ s->p[i].port.irq = irq;
+ s->p[i].port.type = PORT_SC16IS7XX;
+ s->p[i].port.fifosize = SC16IS7XX_FIFO_SIZE;
+ s->p[i].port.flags = UPF_FIXED_TYPE | UPF_LOW_LATENCY;
+ s->p[i].port.iotype = UPIO_PORT;
+ s->p[i].port.uartclk = freq;
+ s->p[i].port.ops = &sc16is7xx_ops;
+ /* Disable all interrupts */
+ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);
+ /* Disable TX/RX */
+ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG,
+ SC16IS7XX_EFCR_RXDISABLE_BIT |
+ SC16IS7XX_EFCR_TXDISABLE_BIT);
+ /* Initialize queue for start TX */
+ INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc);
+ /* Initialize queue for changing mode */
+ INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc);
+ /* Register port */
+ uart_add_one_port(&s->uart, &s->p[i].port);
+ /* Go to suspend mode */
+ sc16is7xx_power(&s->p[i].port, 0);
+ }
+
+ /* Setup interrupt */
+ ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist,
+ IRQF_ONESHOT | flags, dev_name(dev), s);
+ if (!ret)
+ return 0;
+
+ mutex_destroy(&s->mutex);
+
+#ifdef CONFIG_GPIOLIB
+ if (devtype->nr_gpio)
+ WARN_ON(gpiochip_remove(&s->gpio));
+
+out_uart:
+#endif
+ uart_unregister_driver(&s->uart);
+
+out_clk:
+ if (!IS_ERR(s->clk))
+ clk_disable_unprepare(s->clk);
+
+ return ret;
+}
+
+static int sc16is7xx_remove(struct device *dev)
+{
+ struct sc16is7xx_port *s = dev_get_drvdata(dev);
+ int i, ret = 0;
+
+#ifdef CONFIG_GPIOLIB
+ if (s->devtype->nr_gpio) {
+ ret = gpiochip_remove(&s->gpio);
+ if (ret)
+ return ret;
+ }
+#endif
+
+ for (i = 0; i < s->uart.nr; i++) {
+ cancel_work_sync(&s->p[i].tx_work);
+ cancel_work_sync(&s->p[i].md_work);
+ uart_remove_one_port(&s->uart, &s->p[i].port);
+ sc16is7xx_power(&s->p[i].port, 0);
+ }
+
+ mutex_destroy(&s->mutex);
+ uart_unregister_driver(&s->uart);
+ if (!IS_ERR(s->clk))
+ clk_disable_unprepare(s->clk);
+
+ return ret;
+}
+
+static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = {
+ { .compatible = "nxp,sc16is740", .data = &sc16is74x_devtype, },
+ { .compatible = "nxp,sc16is741", .data = &sc16is74x_devtype, },
+ { .compatible = "nxp,sc16is750", .data = &sc16is750_devtype, },
+ { .compatible = "nxp,sc16is752", .data = &sc16is752_devtype, },
+ { .compatible = "nxp,sc16is760", .data = &sc16is760_devtype, },
+ { .compatible = "nxp,sc16is762", .data = &sc16is762_devtype, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sc16is7xx_dt_ids);
+
+static struct regmap_config regcfg = {
+ .reg_bits = 7,
+ .pad_bits = 1,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = sc16is7xx_regmap_volatile,
+ .precious_reg = sc16is7xx_regmap_precious,
+};
+
+static int sc16is7xx_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct sc16is7xx_devtype *devtype;
+ unsigned long flags = 0;
+ struct regmap *regmap;
+
+ if (i2c->dev.of_node) {
+ const struct of_device_id *of_id =
+ of_match_device(sc16is7xx_dt_ids, &i2c->dev);
+
+ devtype = (struct sc16is7xx_devtype *)of_id->data;
+ } else {
+ devtype = (struct sc16is7xx_devtype *)id->driver_data;
+ flags = IRQF_TRIGGER_FALLING;
+ }
+
+ regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) |
+ (devtype->nr_uart - 1);
+ regmap = devm_regmap_init_i2c(i2c, &regcfg);
+
+ return sc16is7xx_probe(&i2c->dev, devtype, regmap, i2c->irq, flags);
+}
+
+static int sc16is7xx_i2c_remove(struct i2c_client *client)
+{
+ return sc16is7xx_remove(&client->dev);
+}
+
+static const struct i2c_device_id sc16is7xx_i2c_id_table[] = {
+ { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, },
+ { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, },
+ { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, },
+ { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, },
+ { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sc16is7xx_i2c_id_table);
+
+static struct i2c_driver sc16is7xx_i2c_uart_driver = {
+ .driver = {
+ .name = SC16IS7XX_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sc16is7xx_dt_ids),
+ },
+ .probe = sc16is7xx_i2c_probe,
+ .remove = sc16is7xx_i2c_remove,
+ .id_table = sc16is7xx_i2c_id_table,
+};
+module_i2c_driver(sc16is7xx_i2c_uart_driver);
+MODULE_ALIAS("i2c:sc16is7xx");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>");
+MODULE_DESCRIPTION("SC16IS7XX serial driver");
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index a447f71538ef..5443b46345ed 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -474,9 +474,7 @@ static void sccnxp_timer(unsigned long data)
sccnxp_handle_events(s);
spin_unlock_irqrestore(&s->lock, flags);
- if (!timer_pending(&s->timer))
- mod_timer(&s->timer, jiffies +
- usecs_to_jiffies(s->pdata.poll_time_us));
+ mod_timer(&s->timer, jiffies + usecs_to_jiffies(s->pdata.poll_time_us));
}
static irqreturn_t sccnxp_ist(int irq, void *dev_id)
@@ -674,6 +672,8 @@ static void sccnxp_set_termios(struct uart_port *port,
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNBRK)
port->ignore_status_mask |= SR_BRK;
+ if (termios->c_iflag & IGNPAR)
+ port->ignore_status_mask |= SR_PE;
if (!(termios->c_cflag & CREAD))
port->ignore_status_mask |= SR_PE | SR_OVR | SR_FE | SR_BRK;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b68550d95a40..fbf6c5ad222f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -174,8 +174,12 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
if (tty->termios.c_cflag & CBAUD)
uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
}
-
- if (tty_port_cts_enabled(port)) {
+ /*
+ * if hw support flow control without software intervention,
+ * then skip the below check
+ */
+ if (tty_port_cts_enabled(port) &&
+ !(uport->flags & UPF_HARD_FLOW)) {
spin_lock_irq(&uport->lock);
if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
tty->hw_stopped = 1;
@@ -2239,6 +2243,9 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
return;
port = state->uart_port;
+
+ if (ch == '\n')
+ port->ops->poll_put_char(port, '\r');
port->ops->poll_put_char(port, ch);
}
#endif
@@ -2772,7 +2779,9 @@ void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
uport->icount.cts++;
- if (tty_port_cts_enabled(port)) {
+ /* skip below code if the hw flow control is supported */
+ if (tty_port_cts_enabled(port) &&
+ !(uport->flags & UPF_HARD_FLOW)) {
if (tty->hw_stopped) {
if (status) {
tty->hw_stopped = 0;
diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c
new file mode 100644
index 000000000000..bf9560ffe3f4
--- /dev/null
+++ b/drivers/tty/serial/serial_mctrl_gpio.c
@@ -0,0 +1,143 @@
+/*
+ * Helpers for controlling modem lines via GPIO
+ *
+ * Copyright (C) 2014 Paratronic S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <uapi/asm-generic/termios.h>
+
+#include "serial_mctrl_gpio.h"
+
+struct mctrl_gpios {
+ struct gpio_desc *gpio[UART_GPIO_MAX];
+};
+
+static const struct {
+ const char *name;
+ unsigned int mctrl;
+ bool dir_out;
+} mctrl_gpios_desc[UART_GPIO_MAX] = {
+ { "cts", TIOCM_CTS, false, },
+ { "dsr", TIOCM_DSR, false, },
+ { "dcd", TIOCM_CD, false, },
+ { "rng", TIOCM_RNG, false, },
+ { "rts", TIOCM_RTS, true, },
+ { "dtr", TIOCM_DTR, true, },
+ { "out1", TIOCM_OUT1, true, },
+ { "out2", TIOCM_OUT2, true, },
+};
+
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
+{
+ enum mctrl_gpio_idx i;
+
+ if (IS_ERR_OR_NULL(gpios))
+ return;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
+ mctrl_gpios_desc[i].dir_out)
+ gpiod_set_value(gpios->gpio[i],
+ !!(mctrl & mctrl_gpios_desc[i].mctrl));
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_set);
+
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+ enum mctrl_gpio_idx gidx)
+{
+ if (!IS_ERR_OR_NULL(gpios) && !IS_ERR_OR_NULL(gpios->gpio[gidx]))
+ return gpios->gpio[gidx];
+ else
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod);
+
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
+{
+ enum mctrl_gpio_idx i;
+
+ /*
+ * return it unchanged if the structure is not allocated
+ */
+ if (IS_ERR_OR_NULL(gpios))
+ return *mctrl;
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ if (!IS_ERR_OR_NULL(gpios->gpio[i]) &&
+ !mctrl_gpios_desc[i].dir_out) {
+ if (gpiod_get_value(gpios->gpio[i]))
+ *mctrl |= mctrl_gpios_desc[i].mctrl;
+ else
+ *mctrl &= ~mctrl_gpios_desc[i].mctrl;
+ }
+ }
+
+ return *mctrl;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_get);
+
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+{
+ struct mctrl_gpios *gpios;
+ enum mctrl_gpio_idx i;
+ int err;
+
+ gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL);
+ if (!gpios)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < UART_GPIO_MAX; i++) {
+ gpios->gpio[i] = devm_gpiod_get_index(dev,
+ mctrl_gpios_desc[i].name,
+ idx);
+
+ /*
+ * The GPIOs are maybe not all filled,
+ * this is not an error.
+ */
+ if (IS_ERR_OR_NULL(gpios->gpio[i]))
+ continue;
+
+ if (mctrl_gpios_desc[i].dir_out)
+ err = gpiod_direction_output(gpios->gpio[i], 0);
+ else
+ err = gpiod_direction_input(gpios->gpio[i]);
+ if (err) {
+ dev_dbg(dev, "Unable to set direction for %s GPIO",
+ mctrl_gpios_desc[i].name);
+ devm_gpiod_put(dev, gpios->gpio[i]);
+ gpios->gpio[i] = NULL;
+ }
+ }
+
+ return gpios;
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_init);
+
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
+{
+ enum mctrl_gpio_idx i;
+
+ if (IS_ERR_OR_NULL(gpios))
+ return;
+
+ for (i = 0; i < UART_GPIO_MAX; i++)
+ if (!IS_ERR_OR_NULL(gpios->gpio[i]))
+ devm_gpiod_put(dev, gpios->gpio[i]);
+ devm_kfree(dev, gpios);
+}
+EXPORT_SYMBOL_GPL(mctrl_gpio_free);
diff --git a/drivers/tty/serial/serial_mctrl_gpio.h b/drivers/tty/serial/serial_mctrl_gpio.h
new file mode 100644
index 000000000000..400ba0494a17
--- /dev/null
+++ b/drivers/tty/serial/serial_mctrl_gpio.h
@@ -0,0 +1,110 @@
+/*
+ * Helpers for controlling modem lines via GPIO
+ *
+ * Copyright (C) 2014 Paratronic S.A.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __SERIAL_MCTRL_GPIO__
+#define __SERIAL_MCTRL_GPIO__
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+
+enum mctrl_gpio_idx {
+ UART_GPIO_CTS,
+ UART_GPIO_DSR,
+ UART_GPIO_DCD,
+ UART_GPIO_RNG,
+ UART_GPIO_RI = UART_GPIO_RNG,
+ UART_GPIO_RTS,
+ UART_GPIO_DTR,
+ UART_GPIO_OUT1,
+ UART_GPIO_OUT2,
+ UART_GPIO_MAX,
+};
+
+/*
+ * Opaque descriptor for modem lines controlled by GPIOs
+ */
+struct mctrl_gpios;
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * Set state of the modem control output lines via GPIOs.
+ */
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl);
+
+/*
+ * Get state of the modem control output lines from GPIOs.
+ * The mctrl flags are updated and returned.
+ */
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl);
+
+/*
+ * Returns the associated struct gpio_desc to the modem line gidx
+ */
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+ enum mctrl_gpio_idx gidx);
+
+/*
+ * Request and set direction of modem control lines GPIOs.
+ * devm_* functions are used, so there's no need to call mctrl_gpio_free().
+ * Returns a pointer to the allocated mctrl structure if ok, -ENOMEM on
+ * allocation error.
+ */
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx);
+
+/*
+ * Free the mctrl_gpios structure.
+ * Normally, this function will not be called, as the GPIOs will
+ * be disposed of by the resource management code.
+ */
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios);
+
+#else /* GPIOLIB */
+
+static inline
+void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl)
+{
+}
+
+static inline
+unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl)
+{
+ return *mctrl;
+}
+
+static inline
+struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios,
+ enum mctrl_gpio_idx gidx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline
+struct mctrl_gpios *mctrl_gpio_init(struct device *dev, unsigned int idx)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline
+void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios)
+{
+}
+
+#endif /* GPIOLIB */
+
+#endif
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index 90a080b1f9ee..60f49b9d7e39 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -535,13 +535,8 @@ static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
wait_for_xmitr(up);
/*
* Send the character out.
- * If a LF, also do CR...
*/
sio_out(up, TXX9_SITFIFO, c);
- if (c == 10) {
- wait_for_xmitr(up);
- sio_out(up, TXX9_SITFIFO, 13);
- }
/*
* Finally, wait for transmitter to become empty
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 68b0fd4b9a6a..1f2be48c92ce 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -358,9 +358,11 @@ static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id)
{
struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
struct uart_port *port = &sirfport->port;
+ spin_lock(&port->lock);
if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled)
uart_handle_cts_change(port,
!gpio_get_value(sirfport->cts_gpio));
+ spin_unlock(&port->lock);
return IRQ_HANDLED;
}
@@ -428,10 +430,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
sirfport->rx_io_count += rx_count;
port->icount.rx += rx_count;
- spin_unlock(&port->lock);
- tty_flip_buffer_push(&port->state->port);
- spin_lock(&port->lock);
-
return rx_count;
}
@@ -465,6 +463,7 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param)
struct circ_buf *xmit = &port->state->xmit;
unsigned long flags;
+ spin_lock_irqsave(&port->lock, flags);
xmit->tail = (xmit->tail + sirfport->transfer_size) &
(UART_XMIT_SIZE - 1);
port->icount.tx += sirfport->transfer_size;
@@ -473,10 +472,9 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param)
if (sirfport->tx_dma_addr)
dma_unmap_single(port->dev, sirfport->tx_dma_addr,
sirfport->transfer_size, DMA_TO_DEVICE);
- spin_lock_irqsave(&sirfport->tx_lock, flags);
sirfport->tx_dma_state = TX_DMA_IDLE;
sirfsoc_uart_tx_with_dma(sirfport);
- spin_unlock_irqrestore(&sirfport->tx_lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static void sirfsoc_uart_insert_rx_buf_to_tty(
@@ -489,7 +487,6 @@ static void sirfsoc_uart_insert_rx_buf_to_tty(
inserted = tty_insert_flip_string(tport,
sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count);
port->icount.rx += inserted;
- tty_flip_buffer_push(tport);
}
static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index)
@@ -525,7 +522,7 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
unsigned long flags;
struct dma_tx_state tx_state;
- spin_lock_irqsave(&sirfport->rx_lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
@@ -541,12 +538,8 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
SIRFUART_IO_MODE);
- spin_unlock_irqrestore(&sirfport->rx_lock, flags);
- spin_lock(&port->lock);
sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
- spin_unlock(&port->lock);
if (sirfport->rx_io_count == 4) {
- spin_lock_irqsave(&sirfport->rx_lock, flags);
sirfport->rx_io_count = 0;
wr_regl(port, ureg->sirfsoc_int_st_reg,
uint_st->sirfsoc_rx_done);
@@ -557,11 +550,8 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
else
wr_regl(port, SIRFUART_INT_EN_CLR,
uint_en->sirfsoc_rx_done_en);
- spin_unlock_irqrestore(&sirfport->rx_lock, flags);
-
sirfsoc_uart_start_next_rx_dma(port);
} else {
- spin_lock_irqsave(&sirfport->rx_lock, flags);
wr_regl(port, ureg->sirfsoc_int_st_reg,
uint_st->sirfsoc_rx_done);
if (!sirfport->is_marco)
@@ -571,8 +561,9 @@ static void sirfsoc_rx_tmo_process_tl(unsigned long param)
else
wr_regl(port, ureg->sirfsoc_int_en_reg,
uint_en->sirfsoc_rx_done_en);
- spin_unlock_irqrestore(&sirfport->rx_lock, flags);
}
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_flip_buffer_push(&port->state->port);
}
static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
@@ -581,8 +572,6 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
struct dma_tx_state tx_state;
- spin_lock(&sirfport->rx_lock);
-
dmaengine_tx_status(sirfport->rx_dma_chan,
sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state);
dmaengine_terminate_all(sirfport->rx_dma_chan);
@@ -595,7 +584,6 @@ static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport)
else
wr_regl(port, SIRFUART_INT_EN_CLR,
uint_en->sirfsoc_rx_timeout_en);
- spin_unlock(&sirfport->rx_lock);
tasklet_schedule(&sirfport->rx_tmo_process_tasklet);
}
@@ -659,7 +647,6 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
intr_status &= port->read_status_mask;
uart_insert_char(port, intr_status,
uint_en->sirfsoc_rx_oflow_en, 0, flag);
- tty_flip_buffer_push(&state->port);
}
recv_char:
if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) &&
@@ -684,6 +671,9 @@ recv_char:
sirfsoc_uart_pio_rx_chars(port,
SIRFSOC_UART_IO_RX_MAX_CNT);
}
+ spin_unlock(&port->lock);
+ tty_flip_buffer_push(&state->port);
+ spin_lock(&port->lock);
if (intr_status & uint_st->sirfsoc_txfifo_empty) {
if (sirfport->tx_dma_chan)
sirfsoc_uart_tx_with_dma(sirfport);
@@ -702,6 +692,7 @@ recv_char:
}
}
spin_unlock(&port->lock);
+
return IRQ_HANDLED;
}
@@ -713,7 +704,7 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
unsigned long flags;
struct dma_tx_state tx_state;
- spin_lock_irqsave(&sirfport->rx_lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan,
sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) {
sirfsoc_uart_insert_rx_buf_to_tty(sirfport,
@@ -726,17 +717,20 @@ static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param)
sirfport->rx_completed++;
sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT;
}
- spin_unlock_irqrestore(&sirfport->rx_lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_flip_buffer_push(&port->state->port);
}
static void sirfsoc_uart_rx_dma_complete_callback(void *param)
{
struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
- spin_lock(&sirfport->rx_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&sirfport->port.lock, flags);
sirfport->rx_issued++;
sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT;
- spin_unlock(&sirfport->rx_lock);
tasklet_schedule(&sirfport->rx_dma_complete_tasklet);
+ spin_unlock_irqrestore(&sirfport->port.lock, flags);
}
/* submit rx dma task into dmaengine */
@@ -745,18 +739,14 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
struct sirfsoc_uart_port *sirfport = to_sirfport(port);
struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- unsigned long flags;
int i;
- spin_lock_irqsave(&sirfport->rx_lock, flags);
sirfport->rx_io_count = 0;
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
~SIRFUART_IO_MODE);
- spin_unlock_irqrestore(&sirfport->rx_lock, flags);
for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++)
sirfsoc_rx_submit_one_dma_desc(port, i);
sirfport->rx_completed = sirfport->rx_issued = 0;
- spin_lock_irqsave(&sirfport->rx_lock, flags);
if (!sirfport->is_marco)
wr_regl(port, ureg->sirfsoc_int_en_reg,
rd_regl(port, ureg->sirfsoc_int_en_reg) |
@@ -764,7 +754,6 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
else
wr_regl(port, ureg->sirfsoc_int_en_reg,
SIRFUART_RX_DMA_INT_EN(port, uint_en));
- spin_unlock_irqrestore(&sirfport->rx_lock, flags);
}
static void sirfsoc_uart_start_rx(struct uart_port *port)
@@ -1228,7 +1217,7 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
while (rd_regl(port,
ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line))
cpu_relax();
- wr_regb(port, ureg->sirfsoc_tx_fifo_data, ch);
+ wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch);
}
static void sirfsoc_uart_console_write(struct console *co, const char *s,
@@ -1369,8 +1358,6 @@ usp_no_flow_control:
ret = -EFAULT;
goto err;
}
- spin_lock_init(&sirfport->rx_lock);
- spin_lock_init(&sirfport->tx_lock);
tasklet_init(&sirfport->rx_dma_complete_tasklet,
sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport);
tasklet_init(&sirfport->rx_tmo_process_tasklet,
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
index 8a6eddad2f3c..69a62ebd3afc 100644
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ b/drivers/tty/serial/sirfsoc_uart.h
@@ -424,8 +424,6 @@ struct sirfsoc_uart_port {
struct dma_chan *tx_dma_chan;
dma_addr_t tx_dma_addr;
struct dma_async_tx_descriptor *tx_dma_desc;
- spinlock_t rx_lock;
- spinlock_t tx_lock;
struct tasklet_struct rx_dma_complete_tasklet;
struct tasklet_struct rx_tmo_process_tasklet;
unsigned int rx_io_count;
@@ -441,9 +439,7 @@ struct sirfsoc_uart_port {
/* Register Access Control */
#define portaddr(port, reg) ((port)->membase + (reg))
-#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg)))
#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
-#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
/* UART Port Mask */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index dd3a96e07026..c7f61ac27132 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -194,9 +194,9 @@ static inline u32 asc_txfifo_is_empty(struct uart_port *port)
return asc_in(port, ASC_STA) & ASC_STA_TE;
}
-static inline int asc_txfifo_is_full(struct uart_port *port)
+static inline u32 asc_txfifo_is_half_empty(struct uart_port *port)
{
- return asc_in(port, ASC_STA) & ASC_STA_TF;
+ return asc_in(port, ASC_STA) & ASC_STA_THE;
}
static inline const char *asc_port_name(struct uart_port *port)
@@ -628,7 +628,7 @@ static int asc_get_poll_char(struct uart_port *port)
static void asc_put_poll_char(struct uart_port *port, unsigned char c)
{
- while (asc_txfifo_is_full(port))
+ while (!asc_txfifo_is_half_empty(port))
cpu_relax();
asc_out(port, ASC_TXBUF, c);
}
@@ -783,7 +783,7 @@ static void asc_console_putchar(struct uart_port *port, int ch)
unsigned int timeout = 1000000;
/* Wait for upto 1 second in case flow control is stopping us. */
- while (--timeout && asc_txfifo_is_full(port))
+ while (--timeout && !asc_txfifo_is_half_empty(port))
udelay(1);
asc_out(port, ASC_TXBUF, ch);
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 5f90ef24d475..dce27f34937e 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -418,14 +418,23 @@ static struct uart_ops ulite_ops = {
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
static void ulite_console_wait_tx(struct uart_port *port)
{
- int i;
u8 val;
-
- /* Spin waiting for TX fifo to have space available */
- for (i = 0; i < 100000; i++) {
+ unsigned long timeout;
+
+ /*
+ * Spin waiting for TX fifo to have space available.
+ * When using the Microblaze Debug Module this can take up to 1s
+ */
+ timeout = jiffies + msecs_to_jiffies(1000);
+ while (1) {
val = uart_in32(ULITE_STATUS, port);
if ((val & ULITE_STATUS_TXFULL) == 0)
break;
+ if (time_after(jiffies, timeout)) {
+ dev_warn(port->dev,
+ "timeout waiting for TX buffer empty\n");
+ break;
+ }
cpu_relax();
}
}
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f619ad5b5eae..8809775e2ba3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1,7 +1,7 @@
/*
- * Xilinx PS UART driver
+ * Cadence UART driver (found in Xilinx Zynq)
*
- * 2011 - 2013 (C) Xilinx Inc.
+ * 2011 - 2014 (C) Xilinx Inc.
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General Public
@@ -9,6 +9,9 @@
* either version 2 of the License, or (at your option) any
* later version.
*
+ * This driver has originally been pushed by Xilinx using a Zynq-branding. This
+ * still shows in the naming of this file, the kconfig symbols and some symbols
+ * in the code.
*/
#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -28,16 +31,16 @@
#include <linux/of.h>
#include <linux/module.h>
-#define XUARTPS_TTY_NAME "ttyPS"
-#define XUARTPS_NAME "xuartps"
-#define XUARTPS_MAJOR 0 /* use dynamic node allocation */
-#define XUARTPS_MINOR 0 /* works best with devtmpfs */
-#define XUARTPS_NR_PORTS 2
-#define XUARTPS_FIFO_SIZE 64 /* FIFO size */
-#define XUARTPS_REGISTER_SPACE 0xFFF
+#define CDNS_UART_TTY_NAME "ttyPS"
+#define CDNS_UART_NAME "xuartps"
+#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
+#define CDNS_UART_NR_PORTS 2
+#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
+#define CDNS_UART_REGISTER_SPACE 0xFFF
-#define xuartps_readl(offset) ioread32(port->membase + offset)
-#define xuartps_writel(val, offset) iowrite32(val, port->membase + offset)
+#define cdns_uart_readl(offset) ioread32(port->membase + offset)
+#define cdns_uart_writel(val, offset) iowrite32(val, port->membase + offset)
/* Rx Trigger level */
static int rx_trigger_level = 56;
@@ -49,77 +52,62 @@ static int rx_timeout = 10;
module_param(rx_timeout, uint, S_IRUGO);
MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
-/********************************Register Map********************************/
-/** UART
- *
- * Register offsets for the UART.
- *
- */
-#define XUARTPS_CR_OFFSET 0x00 /* Control Register [8:0] */
-#define XUARTPS_MR_OFFSET 0x04 /* Mode Register [10:0] */
-#define XUARTPS_IER_OFFSET 0x08 /* Interrupt Enable [10:0] */
-#define XUARTPS_IDR_OFFSET 0x0C /* Interrupt Disable [10:0] */
-#define XUARTPS_IMR_OFFSET 0x10 /* Interrupt Mask [10:0] */
-#define XUARTPS_ISR_OFFSET 0x14 /* Interrupt Status [10:0]*/
-#define XUARTPS_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator [15:0] */
-#define XUARTPS_RXTOUT_OFFSET 0x1C /* RX Timeout [7:0] */
-#define XUARTPS_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level [5:0] */
-#define XUARTPS_MODEMCR_OFFSET 0x24 /* Modem Control [5:0] */
-#define XUARTPS_MODEMSR_OFFSET 0x28 /* Modem Status [8:0] */
-#define XUARTPS_SR_OFFSET 0x2C /* Channel Status [11:0] */
-#define XUARTPS_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
-#define XUARTPS_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider [7:0] */
-#define XUARTPS_FLOWDEL_OFFSET 0x38 /* Flow Delay [15:0] */
-#define XUARTPS_IRRX_PWIDTH_OFFSET 0x3C /* IR Minimum Received Pulse
- Width [15:0] */
-#define XUARTPS_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse
- Width [7:0] */
-#define XUARTPS_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level [5:0] */
-
-/** Control Register
- *
- * The Control register (CR) controls the major functions of the device.
- *
- * Control Register Bit Definitions
- */
-#define XUARTPS_CR_STOPBRK 0x00000100 /* Stop TX break */
-#define XUARTPS_CR_STARTBRK 0x00000080 /* Set TX break */
-#define XUARTPS_CR_TX_DIS 0x00000020 /* TX disabled. */
-#define XUARTPS_CR_TX_EN 0x00000010 /* TX enabled */
-#define XUARTPS_CR_RX_DIS 0x00000008 /* RX disabled. */
-#define XUARTPS_CR_RX_EN 0x00000004 /* RX enabled */
-#define XUARTPS_CR_TXRST 0x00000002 /* TX logic reset */
-#define XUARTPS_CR_RXRST 0x00000001 /* RX logic reset */
-#define XUARTPS_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
-
-/** Mode Register
- *
+/* Register offsets for the UART. */
+#define CDNS_UART_CR_OFFSET 0x00 /* Control Register */
+#define CDNS_UART_MR_OFFSET 0x04 /* Mode Register */
+#define CDNS_UART_IER_OFFSET 0x08 /* Interrupt Enable */
+#define CDNS_UART_IDR_OFFSET 0x0C /* Interrupt Disable */
+#define CDNS_UART_IMR_OFFSET 0x10 /* Interrupt Mask */
+#define CDNS_UART_ISR_OFFSET 0x14 /* Interrupt Status */
+#define CDNS_UART_BAUDGEN_OFFSET 0x18 /* Baud Rate Generator */
+#define CDNS_UART_RXTOUT_OFFSET 0x1C /* RX Timeout */
+#define CDNS_UART_RXWM_OFFSET 0x20 /* RX FIFO Trigger Level */
+#define CDNS_UART_MODEMCR_OFFSET 0x24 /* Modem Control */
+#define CDNS_UART_MODEMSR_OFFSET 0x28 /* Modem Status */
+#define CDNS_UART_SR_OFFSET 0x2C /* Channel Status */
+#define CDNS_UART_FIFO_OFFSET 0x30 /* FIFO */
+#define CDNS_UART_BAUDDIV_OFFSET 0x34 /* Baud Rate Divider */
+#define CDNS_UART_FLOWDEL_OFFSET 0x38 /* Flow Delay */
+#define CDNS_UART_IRRX_PWIDTH_OFFSET 0x3C /* IR Min Received Pulse Width */
+#define CDNS_UART_IRTX_PWIDTH_OFFSET 0x40 /* IR Transmitted pulse Width */
+#define CDNS_UART_TXWM_OFFSET 0x44 /* TX FIFO Trigger Level */
+
+/* Control Register Bit Definitions */
+#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
+#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */
+#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */
+#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */
+#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */
+#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */
+#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */
+#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */
+#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
+
+/*
+ * Mode Register:
* The mode register (MR) defines the mode of transfer as well as the data
* format. If this register is modified during transmission or reception,
* data validity cannot be guaranteed.
- *
- * Mode Register Bit Definitions
- *
*/
-#define XUARTPS_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
-#define XUARTPS_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
-#define XUARTPS_MR_CHMODE_NORM 0x00000000 /* Normal mode */
+#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
+#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
+#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */
-#define XUARTPS_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
-#define XUARTPS_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
+#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
+#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
-#define XUARTPS_MR_PARITY_NONE 0x00000020 /* No parity mode */
-#define XUARTPS_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
-#define XUARTPS_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
-#define XUARTPS_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
-#define XUARTPS_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
+#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
+#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
+#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
+#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
+#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
-#define XUARTPS_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
-#define XUARTPS_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
-#define XUARTPS_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
+#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
+#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
+#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
-/** Interrupt Registers
- *
+/*
+ * Interrupt Registers:
* Interrupt control logic uses the interrupt enable register (IER) and the
* interrupt disable register (IDR) to set the value of the bits in the
* interrupt mask register (IMR). The IMR determines whether to pass an
@@ -127,65 +115,65 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
* Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
* interrupt. IMR and ISR are read only, and IER and IDR are write only.
* Reading either IER or IDR returns 0x00.
- *
* All four registers have the same bit definitions.
*/
-#define XUARTPS_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
-#define XUARTPS_IXR_PARITY 0x00000080 /* Parity error interrupt */
-#define XUARTPS_IXR_FRAMING 0x00000040 /* Framing error interrupt */
-#define XUARTPS_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
-#define XUARTPS_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
-#define XUARTPS_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
-#define XUARTPS_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
-#define XUARTPS_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
-#define XUARTPS_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
-#define XUARTPS_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
-#define XUARTPS_IXR_MASK 0x00001FFF /* Valid bit mask */
+#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
+#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */
+#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */
+#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
+#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
+#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
+#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
+#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
+#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
+#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
+#define CDNS_UART_IXR_MASK 0x00001FFF /* Valid bit mask */
/* Goes in read_status_mask for break detection as the HW doesn't do it*/
-#define XUARTPS_IXR_BRK 0x80000000
+#define CDNS_UART_IXR_BRK 0x80000000
-/** Channel Status Register
- *
+/*
+ * Channel Status Register:
* The channel status register (CSR) is provided to enable the control logic
* to monitor the status of bits in the channel interrupt status register,
* even if these are masked out by the interrupt mask register.
*/
-#define XUARTPS_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
-#define XUARTPS_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
-#define XUARTPS_SR_TXFULL 0x00000010 /* TX FIFO full */
-#define XUARTPS_SR_RXTRIG 0x00000001 /* Rx Trigger */
+#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
+#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
+#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
+#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
/* baud dividers min/max values */
-#define XUARTPS_BDIV_MIN 4
-#define XUARTPS_BDIV_MAX 255
-#define XUARTPS_CD_MAX 65535
+#define CDNS_UART_BDIV_MIN 4
+#define CDNS_UART_BDIV_MAX 255
+#define CDNS_UART_CD_MAX 65535
/**
- * struct xuartps - device data
- * @port Pointer to the UART port
- * @refclk Reference clock
- * @aperclk APB clock
- * @baud Current baud rate
- * @clk_rate_change_nb Notifier block for clock changes
+ * struct cdns_uart - device data
+ * @port: Pointer to the UART port
+ * @uartclk: Reference clock
+ * @pclk: APB clock
+ * @baud: Current baud rate
+ * @clk_rate_change_nb: Notifier block for clock changes
*/
-struct xuartps {
+struct cdns_uart {
struct uart_port *port;
- struct clk *refclk;
- struct clk *aperclk;
+ struct clk *uartclk;
+ struct clk *pclk;
unsigned int baud;
struct notifier_block clk_rate_change_nb;
};
-#define to_xuartps(_nb) container_of(_nb, struct xuartps, clk_rate_change_nb);
+#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
+ clk_rate_change_nb);
/**
- * xuartps_isr - Interrupt handler
+ * cdns_uart_isr - Interrupt handler
* @irq: Irq number
* @dev_id: Id of the port
*
- * Returns IRQHANDLED
- **/
-static irqreturn_t xuartps_isr(int irq, void *dev_id)
+ * Return: IRQHANDLED
+ */
+static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
unsigned long flags;
@@ -198,43 +186,42 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
/* Read the interrupt status register to determine which
* interrupt(s) is/are active.
*/
- isrstatus = xuartps_readl(XUARTPS_ISR_OFFSET);
+ isrstatus = cdns_uart_readl(CDNS_UART_ISR_OFFSET);
/*
* There is no hardware break detection, so we interpret framing
* error with all-zeros data as a break sequence. Most of the time,
* there's another non-zero byte at the end of the sequence.
*/
-
- if (isrstatus & XUARTPS_IXR_FRAMING) {
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_RXEMPTY)) {
- if (!xuartps_readl(XUARTPS_FIFO_OFFSET)) {
- port->read_status_mask |= XUARTPS_IXR_BRK;
- isrstatus &= ~XUARTPS_IXR_FRAMING;
+ if (isrstatus & CDNS_UART_IXR_FRAMING) {
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY)) {
+ if (!cdns_uart_readl(CDNS_UART_FIFO_OFFSET)) {
+ port->read_status_mask |= CDNS_UART_IXR_BRK;
+ isrstatus &= ~CDNS_UART_IXR_FRAMING;
}
}
- xuartps_writel(XUARTPS_IXR_FRAMING, XUARTPS_ISR_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_FRAMING, CDNS_UART_ISR_OFFSET);
}
/* drop byte with parity error if IGNPAR specified */
- if (isrstatus & port->ignore_status_mask & XUARTPS_IXR_PARITY)
- isrstatus &= ~(XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT);
+ if (isrstatus & port->ignore_status_mask & CDNS_UART_IXR_PARITY)
+ isrstatus &= ~(CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT);
isrstatus &= port->read_status_mask;
isrstatus &= ~port->ignore_status_mask;
- if ((isrstatus & XUARTPS_IXR_TOUT) ||
- (isrstatus & XUARTPS_IXR_RXTRIG)) {
+ if ((isrstatus & CDNS_UART_IXR_TOUT) ||
+ (isrstatus & CDNS_UART_IXR_RXTRIG)) {
/* Receive Timeout Interrupt */
- while ((xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
- data = xuartps_readl(XUARTPS_FIFO_OFFSET);
+ while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+ data = cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
/* Non-NULL byte after BREAK is garbage (99%) */
if (data && (port->read_status_mask &
- XUARTPS_IXR_BRK)) {
- port->read_status_mask &= ~XUARTPS_IXR_BRK;
+ CDNS_UART_IXR_BRK)) {
+ port->read_status_mask &= ~CDNS_UART_IXR_BRK;
port->icount.brk++;
if (uart_handle_break(port))
continue;
@@ -258,16 +245,17 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
port->icount.rx++;
- if (isrstatus & XUARTPS_IXR_PARITY) {
+ if (isrstatus & CDNS_UART_IXR_PARITY) {
port->icount.parity++;
status = TTY_PARITY;
- } else if (isrstatus & XUARTPS_IXR_FRAMING) {
+ } else if (isrstatus & CDNS_UART_IXR_FRAMING) {
port->icount.frame++;
status = TTY_FRAME;
- } else if (isrstatus & XUARTPS_IXR_OVERRUN)
+ } else if (isrstatus & CDNS_UART_IXR_OVERRUN) {
port->icount.overrun++;
+ }
- uart_insert_char(port, isrstatus, XUARTPS_IXR_OVERRUN,
+ uart_insert_char(port, isrstatus, CDNS_UART_IXR_OVERRUN,
data, status);
}
spin_unlock(&port->lock);
@@ -276,10 +264,10 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
}
/* Dispatch an appropriate handler */
- if ((isrstatus & XUARTPS_IXR_TXEMPTY) == XUARTPS_IXR_TXEMPTY) {
+ if ((isrstatus & CDNS_UART_IXR_TXEMPTY) == CDNS_UART_IXR_TXEMPTY) {
if (uart_circ_empty(&port->state->xmit)) {
- xuartps_writel(XUARTPS_IXR_TXEMPTY,
- XUARTPS_IDR_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY,
+ CDNS_UART_IDR_OFFSET);
} else {
numbytes = port->fifosize;
/* Break if no more data available in the UART buffer */
@@ -287,12 +275,12 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
if (uart_circ_empty(&port->state->xmit))
break;
/* Get the data from the UART circular buffer
- * and write it to the xuartps's TX_FIFO
+ * and write it to the cdns_uart's TX_FIFO
* register.
*/
- xuartps_writel(
+ cdns_uart_writel(
port->state->xmit.buf[port->state->xmit.
- tail], XUARTPS_FIFO_OFFSET);
+ tail], CDNS_UART_FIFO_OFFSET);
port->icount.tx++;
@@ -300,7 +288,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
* the buffer if it reaches limit.
*/
port->state->xmit.tail =
- (port->state->xmit.tail + 1) & \
+ (port->state->xmit.tail + 1) &
(UART_XMIT_SIZE - 1);
}
@@ -310,7 +298,7 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
}
}
- xuartps_writel(isrstatus, XUARTPS_ISR_OFFSET);
+ cdns_uart_writel(isrstatus, CDNS_UART_ISR_OFFSET);
/* be sure to release the lock and tty before leaving */
spin_unlock_irqrestore(&port->lock, flags);
@@ -319,13 +307,13 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
}
/**
- * xuartps_calc_baud_divs - Calculate baud rate divisors
+ * cdns_uart_calc_baud_divs - Calculate baud rate divisors
* @clk: UART module input clock
* @baud: Desired baud rate
* @rbdiv: BDIV value (return value)
* @rcd: CD value (return value)
* @div8: Value for clk_sel bit in mod (return value)
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
* was too much error, zero if no valid divisors are found.
*
* Formula to obtain baud rate is
@@ -338,8 +326,8 @@ static irqreturn_t xuartps_isr(int irq, void *dev_id)
* baud rate generate register
* baud rate clock divisor register
*/
-static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
- u32 *rbdiv, u32 *rcd, int *div8)
+static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
+ unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
{
u32 cd, bdiv;
unsigned int calc_baud;
@@ -347,16 +335,16 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
unsigned int bauderror;
unsigned int besterror = ~0;
- if (baud < clk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX)) {
+ if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
*div8 = 1;
clk /= 8;
} else {
*div8 = 0;
}
- for (bdiv = XUARTPS_BDIV_MIN; bdiv <= XUARTPS_BDIV_MAX; bdiv++) {
+ for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
- if (cd < 1 || cd > XUARTPS_CD_MAX)
+ if (cd < 1 || cd > CDNS_UART_CD_MAX)
continue;
calc_baud = clk / (cd * (bdiv + 1));
@@ -381,47 +369,47 @@ static unsigned int xuartps_calc_baud_divs(unsigned int clk, unsigned int baud,
}
/**
- * xuartps_set_baud_rate - Calculate and set the baud rate
+ * cdns_uart_set_baud_rate - Calculate and set the baud rate
* @port: Handle to the uart port structure
* @baud: Baud rate to set
- * Returns baud rate, requested baud when possible, or actual baud when there
+ * Return: baud rate, requested baud when possible, or actual baud when there
* was too much error, zero if no valid divisors are found.
*/
-static unsigned int xuartps_set_baud_rate(struct uart_port *port,
+static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
unsigned int baud)
{
unsigned int calc_baud;
u32 cd = 0, bdiv = 0;
u32 mreg;
int div8;
- struct xuartps *xuartps = port->private_data;
+ struct cdns_uart *cdns_uart = port->private_data;
- calc_baud = xuartps_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
+ calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
&div8);
/* Write new divisors to hardware */
- mreg = xuartps_readl(XUARTPS_MR_OFFSET);
+ mreg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
if (div8)
- mreg |= XUARTPS_MR_CLKSEL;
+ mreg |= CDNS_UART_MR_CLKSEL;
else
- mreg &= ~XUARTPS_MR_CLKSEL;
- xuartps_writel(mreg, XUARTPS_MR_OFFSET);
- xuartps_writel(cd, XUARTPS_BAUDGEN_OFFSET);
- xuartps_writel(bdiv, XUARTPS_BAUDDIV_OFFSET);
- xuartps->baud = baud;
+ mreg &= ~CDNS_UART_MR_CLKSEL;
+ cdns_uart_writel(mreg, CDNS_UART_MR_OFFSET);
+ cdns_uart_writel(cd, CDNS_UART_BAUDGEN_OFFSET);
+ cdns_uart_writel(bdiv, CDNS_UART_BAUDDIV_OFFSET);
+ cdns_uart->baud = baud;
return calc_baud;
}
#ifdef CONFIG_COMMON_CLK
/**
- * xuartps_clk_notitifer_cb - Clock notifier callback
+ * cdns_uart_clk_notitifer_cb - Clock notifier callback
* @nb: Notifier block
* @event: Notify event
* @data: Notifier data
- * Returns NOTIFY_OK on success, NOTIFY_BAD on error.
+ * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
*/
-static int xuartps_clk_notifier_cb(struct notifier_block *nb,
+static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
unsigned long event, void *data)
{
u32 ctrl_reg;
@@ -429,35 +417,36 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
int locked = 0;
struct clk_notifier_data *ndata = data;
unsigned long flags = 0;
- struct xuartps *xuartps = to_xuartps(nb);
+ struct cdns_uart *cdns_uart = to_cdns_uart(nb);
- port = xuartps->port;
+ port = cdns_uart->port;
if (port->suspended)
return NOTIFY_OK;
switch (event) {
case PRE_RATE_CHANGE:
{
- u32 bdiv;
- u32 cd;
+ u32 bdiv, cd;
int div8;
/*
* Find out if current baud-rate can be achieved with new clock
* frequency.
*/
- if (!xuartps_calc_baud_divs(ndata->new_rate, xuartps->baud,
- &bdiv, &cd, &div8))
+ if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
+ &bdiv, &cd, &div8)) {
+ dev_warn(port->dev, "clock rate change rejected\n");
return NOTIFY_BAD;
+ }
- spin_lock_irqsave(&xuartps->port->lock, flags);
+ spin_lock_irqsave(&cdns_uart->port->lock, flags);
/* Disable the TX and RX to set baud rate */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
- spin_unlock_irqrestore(&xuartps->port->lock, flags);
+ spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
return NOTIFY_OK;
}
@@ -467,25 +456,25 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
* frequency.
*/
- spin_lock_irqsave(&xuartps->port->lock, flags);
+ spin_lock_irqsave(&cdns_uart->port->lock, flags);
locked = 1;
port->uartclk = ndata->new_rate;
- xuartps->baud = xuartps_set_baud_rate(xuartps->port,
- xuartps->baud);
+ cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
+ cdns_uart->baud);
/* fall through */
case ABORT_RATE_CHANGE:
if (!locked)
- spin_lock_irqsave(&xuartps->port->lock, flags);
+ spin_lock_irqsave(&cdns_uart->port->lock, flags);
/* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
- while (xuartps_readl(XUARTPS_CR_OFFSET) &
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+ while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
cpu_relax();
/*
@@ -493,14 +482,13 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
* enable bit and RX enable bit to enable the transmitter and
* receiver.
*/
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
- ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
- (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+ ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
- spin_unlock_irqrestore(&xuartps->port->lock, flags);
+ spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
return NOTIFY_OK;
default:
@@ -509,40 +497,36 @@ static int xuartps_clk_notifier_cb(struct notifier_block *nb,
}
#endif
-/*----------------------Uart Operations---------------------------*/
-
/**
- * xuartps_start_tx - Start transmitting bytes
+ * cdns_uart_start_tx - Start transmitting bytes
* @port: Handle to the uart port structure
- *
- **/
-static void xuartps_start_tx(struct uart_port *port)
+ */
+static void cdns_uart_start_tx(struct uart_port *port)
{
unsigned int status, numbytes = port->fifosize;
if (uart_circ_empty(&port->state->xmit) || uart_tx_stopped(port))
return;
- status = xuartps_readl(XUARTPS_CR_OFFSET);
+ status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
/* Set the TX enable bit and clear the TX disable bit to enable the
* transmitter.
*/
- xuartps_writel((status & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
- XUARTPS_CR_OFFSET);
-
- while (numbytes-- && ((xuartps_readl(XUARTPS_SR_OFFSET)
- & XUARTPS_SR_TXFULL)) != XUARTPS_SR_TXFULL) {
+ cdns_uart_writel((status & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+ CDNS_UART_CR_OFFSET);
+ while (numbytes-- && ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_TXFULL)) != CDNS_UART_SR_TXFULL) {
/* Break if no more data available in the UART buffer */
if (uart_circ_empty(&port->state->xmit))
break;
/* Get the data from the UART circular buffer and
- * write it to the xuartps's TX_FIFO register.
+ * write it to the cdns_uart's TX_FIFO register.
*/
- xuartps_writel(
+ cdns_uart_writel(
port->state->xmit.buf[port->state->xmit.tail],
- XUARTPS_FIFO_OFFSET);
+ CDNS_UART_FIFO_OFFSET);
port->icount.tx++;
/* Adjust the tail of the UART buffer and wrap
@@ -551,94 +535,90 @@ static void xuartps_start_tx(struct uart_port *port)
port->state->xmit.tail = (port->state->xmit.tail + 1) &
(UART_XMIT_SIZE - 1);
}
- xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_ISR_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_ISR_OFFSET);
/* Enable the TX Empty interrupt */
- xuartps_writel(XUARTPS_IXR_TXEMPTY, XUARTPS_IER_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY, CDNS_UART_IER_OFFSET);
if (uart_circ_chars_pending(&port->state->xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
/**
- * xuartps_stop_tx - Stop TX
+ * cdns_uart_stop_tx - Stop TX
* @port: Handle to the uart port structure
- *
- **/
-static void xuartps_stop_tx(struct uart_port *port)
+ */
+static void cdns_uart_stop_tx(struct uart_port *port)
{
unsigned int regval;
- regval = xuartps_readl(XUARTPS_CR_OFFSET);
- regval |= XUARTPS_CR_TX_DIS;
+ regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ regval |= CDNS_UART_CR_TX_DIS;
/* Disable the transmitter */
- xuartps_writel(regval, XUARTPS_CR_OFFSET);
+ cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
}
/**
- * xuartps_stop_rx - Stop RX
+ * cdns_uart_stop_rx - Stop RX
* @port: Handle to the uart port structure
- *
- **/
-static void xuartps_stop_rx(struct uart_port *port)
+ */
+static void cdns_uart_stop_rx(struct uart_port *port)
{
unsigned int regval;
- regval = xuartps_readl(XUARTPS_CR_OFFSET);
- regval |= XUARTPS_CR_RX_DIS;
+ regval = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ regval |= CDNS_UART_CR_RX_DIS;
/* Disable the receiver */
- xuartps_writel(regval, XUARTPS_CR_OFFSET);
+ cdns_uart_writel(regval, CDNS_UART_CR_OFFSET);
}
/**
- * xuartps_tx_empty - Check whether TX is empty
+ * cdns_uart_tx_empty - Check whether TX is empty
* @port: Handle to the uart port structure
*
- * Returns TIOCSER_TEMT on success, 0 otherwise
- **/
-static unsigned int xuartps_tx_empty(struct uart_port *port)
+ * Return: TIOCSER_TEMT on success, 0 otherwise
+ */
+static unsigned int cdns_uart_tx_empty(struct uart_port *port)
{
unsigned int status;
- status = xuartps_readl(XUARTPS_ISR_OFFSET) & XUARTPS_IXR_TXEMPTY;
+ status = cdns_uart_readl(CDNS_UART_ISR_OFFSET) & CDNS_UART_IXR_TXEMPTY;
return status ? TIOCSER_TEMT : 0;
}
/**
- * xuartps_break_ctl - Based on the input ctl we have to start or stop
+ * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
* transmitting char breaks
* @port: Handle to the uart port structure
* @ctl: Value based on which start or stop decision is taken
- *
- **/
-static void xuartps_break_ctl(struct uart_port *port, int ctl)
+ */
+static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
{
unsigned int status;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
- status = xuartps_readl(XUARTPS_CR_OFFSET);
+ status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
if (ctl == -1)
- xuartps_writel(XUARTPS_CR_STARTBRK | status,
- XUARTPS_CR_OFFSET);
+ cdns_uart_writel(CDNS_UART_CR_STARTBRK | status,
+ CDNS_UART_CR_OFFSET);
else {
- if ((status & XUARTPS_CR_STOPBRK) == 0)
- xuartps_writel(XUARTPS_CR_STOPBRK | status,
- XUARTPS_CR_OFFSET);
+ if ((status & CDNS_UART_CR_STOPBRK) == 0)
+ cdns_uart_writel(CDNS_UART_CR_STOPBRK | status,
+ CDNS_UART_CR_OFFSET);
}
spin_unlock_irqrestore(&port->lock, flags);
}
/**
- * xuartps_set_termios - termios operations, handling data length, parity,
+ * cdns_uart_set_termios - termios operations, handling data length, parity,
* stop bits, flow control, baud rate
* @port: Handle to the uart port structure
* @termios: Handle to the input termios structure
* @old: Values of the previously saved termios structure
- *
- **/
-static void xuartps_set_termios(struct uart_port *port,
+ */
+static void cdns_uart_set_termios(struct uart_port *port,
struct ktermios *termios, struct ktermios *old)
{
unsigned int cval = 0;
@@ -649,81 +629,79 @@ static void xuartps_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
/* Empty the receive FIFO 1st before making changes */
- while ((xuartps_readl(XUARTPS_SR_OFFSET) &
- XUARTPS_SR_RXEMPTY) != XUARTPS_SR_RXEMPTY) {
- xuartps_readl(XUARTPS_FIFO_OFFSET);
+ while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
+ cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
}
/* Disable the TX and RX to set baud rate */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
/*
* Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
* min and max baud should be calculated here based on port->uartclk.
* this way we get a valid baud and can safely call set_baud()
*/
- minbaud = port->uartclk / ((XUARTPS_BDIV_MAX + 1) * XUARTPS_CD_MAX * 8);
- maxbaud = port->uartclk / (XUARTPS_BDIV_MIN + 1);
+ minbaud = port->uartclk /
+ ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
+ maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
- baud = xuartps_set_baud_rate(port, baud);
+ baud = cdns_uart_set_baud_rate(port, baud);
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
- /*
- * Update the per-port timeout.
- */
+ /* Update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
/* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
- ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
-
- /* Clear the RX disable and TX disable bits and then set the TX enable
+ /*
+ * Clear the RX disable and TX disable bits and then set the TX enable
* bit and RX enable bit to enable the transmitter and receiver.
*/
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
- | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+ ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
- port->read_status_mask = XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_RXTRIG |
- XUARTPS_IXR_OVERRUN | XUARTPS_IXR_TOUT;
+ port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
+ CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
port->ignore_status_mask = 0;
if (termios->c_iflag & INPCK)
- port->read_status_mask |= XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING;
+ port->read_status_mask |= CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING;
if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |= XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
+ port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
/* ignore all characters if CREAD is not set */
if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= XUARTPS_IXR_RXTRIG |
- XUARTPS_IXR_TOUT | XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN;
+ port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
+ CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
- mode_reg = xuartps_readl(XUARTPS_MR_OFFSET);
+ mode_reg = cdns_uart_readl(CDNS_UART_MR_OFFSET);
/* Handling Data Size */
switch (termios->c_cflag & CSIZE) {
case CS6:
- cval |= XUARTPS_MR_CHARLEN_6_BIT;
+ cval |= CDNS_UART_MR_CHARLEN_6_BIT;
break;
case CS7:
- cval |= XUARTPS_MR_CHARLEN_7_BIT;
+ cval |= CDNS_UART_MR_CHARLEN_7_BIT;
break;
default:
case CS8:
- cval |= XUARTPS_MR_CHARLEN_8_BIT;
+ cval |= CDNS_UART_MR_CHARLEN_8_BIT;
termios->c_cflag &= ~CSIZE;
termios->c_cflag |= CS8;
break;
@@ -731,134 +709,135 @@ static void xuartps_set_termios(struct uart_port *port,
/* Handling Parity and Stop Bits length */
if (termios->c_cflag & CSTOPB)
- cval |= XUARTPS_MR_STOPMODE_2_BIT; /* 2 STOP bits */
+ cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
else
- cval |= XUARTPS_MR_STOPMODE_1_BIT; /* 1 STOP bit */
+ cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
if (termios->c_cflag & PARENB) {
/* Mark or Space parity */
if (termios->c_cflag & CMSPAR) {
if (termios->c_cflag & PARODD)
- cval |= XUARTPS_MR_PARITY_MARK;
+ cval |= CDNS_UART_MR_PARITY_MARK;
else
- cval |= XUARTPS_MR_PARITY_SPACE;
+ cval |= CDNS_UART_MR_PARITY_SPACE;
} else {
if (termios->c_cflag & PARODD)
- cval |= XUARTPS_MR_PARITY_ODD;
+ cval |= CDNS_UART_MR_PARITY_ODD;
else
- cval |= XUARTPS_MR_PARITY_EVEN;
+ cval |= CDNS_UART_MR_PARITY_EVEN;
}
} else {
- cval |= XUARTPS_MR_PARITY_NONE;
+ cval |= CDNS_UART_MR_PARITY_NONE;
}
cval |= mode_reg & 1;
- xuartps_writel(cval, XUARTPS_MR_OFFSET);
+ cdns_uart_writel(cval, CDNS_UART_MR_OFFSET);
spin_unlock_irqrestore(&port->lock, flags);
}
/**
- * xuartps_startup - Called when an application opens a xuartps port
+ * cdns_uart_startup - Called when an application opens a cdns_uart port
* @port: Handle to the uart port structure
*
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_startup(struct uart_port *port)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_startup(struct uart_port *port)
{
unsigned int retval = 0, status = 0;
- retval = request_irq(port->irq, xuartps_isr, 0, XUARTPS_NAME,
+ retval = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME,
(void *)port);
if (retval)
return retval;
/* Disable the TX and RX */
- xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
- XUARTPS_CR_OFFSET);
+ cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+ CDNS_UART_CR_OFFSET);
/* Set the Control Register with TX/RX Enable, TX/RX Reset,
* no break chars.
*/
- xuartps_writel(XUARTPS_CR_TXRST | XUARTPS_CR_RXRST,
- XUARTPS_CR_OFFSET);
+ cdns_uart_writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
+ CDNS_UART_CR_OFFSET);
- status = xuartps_readl(XUARTPS_CR_OFFSET);
+ status = cdns_uart_readl(CDNS_UART_CR_OFFSET);
/* Clear the RX disable and TX disable bits and then set the TX enable
* bit and RX enable bit to enable the transmitter and receiver.
*/
- xuartps_writel((status & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS))
- | (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN |
- XUARTPS_CR_STOPBRK), XUARTPS_CR_OFFSET);
+ cdns_uart_writel((status & ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS))
+ | (CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN |
+ CDNS_UART_CR_STOPBRK), CDNS_UART_CR_OFFSET);
/* Set the Mode Register with normal mode,8 data bits,1 stop bit,
* no parity.
*/
- xuartps_writel(XUARTPS_MR_CHMODE_NORM | XUARTPS_MR_STOPMODE_1_BIT
- | XUARTPS_MR_PARITY_NONE | XUARTPS_MR_CHARLEN_8_BIT,
- XUARTPS_MR_OFFSET);
+ cdns_uart_writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
+ | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
+ CDNS_UART_MR_OFFSET);
/*
* Set the RX FIFO Trigger level to use most of the FIFO, but it
* can be tuned with a module parameter
*/
- xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+ cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
/*
* Receive Timeout register is enabled but it
* can be tuned with a module parameter
*/
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
/* Clear out any pending interrupts before enabling them */
- xuartps_writel(xuartps_readl(XUARTPS_ISR_OFFSET), XUARTPS_ISR_OFFSET);
+ cdns_uart_writel(cdns_uart_readl(CDNS_UART_ISR_OFFSET),
+ CDNS_UART_ISR_OFFSET);
/* Set the Interrupt Registers with desired interrupts */
- xuartps_writel(XUARTPS_IXR_TXEMPTY | XUARTPS_IXR_PARITY |
- XUARTPS_IXR_FRAMING | XUARTPS_IXR_OVERRUN |
- XUARTPS_IXR_RXTRIG | XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_PARITY |
+ CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN |
+ CDNS_UART_IXR_RXTRIG | CDNS_UART_IXR_TOUT,
+ CDNS_UART_IER_OFFSET);
return retval;
}
/**
- * xuartps_shutdown - Called when an application closes a xuartps port
+ * cdns_uart_shutdown - Called when an application closes a cdns_uart port
* @port: Handle to the uart port structure
- *
- **/
-static void xuartps_shutdown(struct uart_port *port)
+ */
+static void cdns_uart_shutdown(struct uart_port *port)
{
int status;
/* Disable interrupts */
- status = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(status, XUARTPS_IDR_OFFSET);
+ status = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(status, CDNS_UART_IDR_OFFSET);
/* Disable the TX and RX */
- xuartps_writel(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS,
- XUARTPS_CR_OFFSET);
+ cdns_uart_writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
+ CDNS_UART_CR_OFFSET);
free_irq(port->irq, port);
}
/**
- * xuartps_type - Set UART type to xuartps port
+ * cdns_uart_type - Set UART type to cdns_uart port
* @port: Handle to the uart port structure
*
- * Returns string on success, NULL otherwise
- **/
-static const char *xuartps_type(struct uart_port *port)
+ * Return: string on success, NULL otherwise
+ */
+static const char *cdns_uart_type(struct uart_port *port)
{
- return port->type == PORT_XUARTPS ? XUARTPS_NAME : NULL;
+ return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
}
/**
- * xuartps_verify_port - Verify the port params
+ * cdns_uart_verify_port - Verify the port params
* @port: Handle to the uart port structure
* @ser: Handle to the structure whose members are compared
*
- * Returns 0 if success otherwise -EINVAL
- **/
-static int xuartps_verify_port(struct uart_port *port,
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
@@ -875,187 +854,170 @@ static int xuartps_verify_port(struct uart_port *port,
}
/**
- * xuartps_request_port - Claim the memory region attached to xuartps port,
- * called when the driver adds a xuartps port via
+ * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
+ * called when the driver adds a cdns_uart port via
* uart_add_one_port()
* @port: Handle to the uart port structure
*
- * Returns 0, -ENOMEM if request fails
- **/
-static int xuartps_request_port(struct uart_port *port)
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int cdns_uart_request_port(struct uart_port *port)
{
- if (!request_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE,
- XUARTPS_NAME)) {
+ if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
+ CDNS_UART_NAME)) {
return -ENOMEM;
}
- port->membase = ioremap(port->mapbase, XUARTPS_REGISTER_SPACE);
+ port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
if (!port->membase) {
dev_err(port->dev, "Unable to map registers\n");
- release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
+ release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
return -ENOMEM;
}
return 0;
}
/**
- * xuartps_release_port - Release the memory region attached to a xuartps
- * port, called when the driver removes a xuartps
- * port via uart_remove_one_port().
+ * cdns_uart_release_port - Release UART port
* @port: Handle to the uart port structure
*
- **/
-static void xuartps_release_port(struct uart_port *port)
+ * Release the memory region attached to a cdns_uart port. Called when the
+ * driver removes a cdns_uart port via uart_remove_one_port().
+ */
+static void cdns_uart_release_port(struct uart_port *port)
{
- release_mem_region(port->mapbase, XUARTPS_REGISTER_SPACE);
+ release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
iounmap(port->membase);
port->membase = NULL;
}
/**
- * xuartps_config_port - Configure xuartps, called when the driver adds a
- * xuartps port
+ * cdns_uart_config_port - Configure UART port
* @port: Handle to the uart port structure
* @flags: If any
- *
- **/
-static void xuartps_config_port(struct uart_port *port, int flags)
+ */
+static void cdns_uart_config_port(struct uart_port *port, int flags)
{
- if (flags & UART_CONFIG_TYPE && xuartps_request_port(port) == 0)
+ if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
port->type = PORT_XUARTPS;
}
/**
- * xuartps_get_mctrl - Get the modem control state
- *
+ * cdns_uart_get_mctrl - Get the modem control state
* @port: Handle to the uart port structure
*
- * Returns the modem control state
- *
- **/
-static unsigned int xuartps_get_mctrl(struct uart_port *port)
+ * Return: the modem control state
+ */
+static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
{
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
}
-static void xuartps_set_mctrl(struct uart_port *port, unsigned int mctrl)
+static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
/* N/A */
}
-static void xuartps_enable_ms(struct uart_port *port)
+static void cdns_uart_enable_ms(struct uart_port *port)
{
/* N/A */
}
#ifdef CONFIG_CONSOLE_POLL
-static int xuartps_poll_get_char(struct uart_port *port)
+static int cdns_uart_poll_get_char(struct uart_port *port)
{
u32 imr;
int c;
/* Disable all interrupts */
- imr = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+ imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
/* Check if FIFO is empty */
- if (xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY)
+ if (cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_RXEMPTY)
c = NO_POLL_CHAR;
else /* Read a character */
- c = (unsigned char) xuartps_readl(XUARTPS_FIFO_OFFSET);
+ c = (unsigned char) cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
/* Enable interrupts */
- xuartps_writel(imr, XUARTPS_IER_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
return c;
}
-static void xuartps_poll_put_char(struct uart_port *port, unsigned char c)
+static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
{
u32 imr;
/* Disable all interrupts */
- imr = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+ imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
/* Wait until FIFO is empty */
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
cpu_relax();
/* Write a character */
- xuartps_writel(c, XUARTPS_FIFO_OFFSET);
+ cdns_uart_writel(c, CDNS_UART_FIFO_OFFSET);
/* Wait until FIFO is empty */
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY))
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY))
cpu_relax();
/* Enable interrupts */
- xuartps_writel(imr, XUARTPS_IER_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
return;
}
#endif
-/** The UART operations structure
- */
-static struct uart_ops xuartps_ops = {
- .set_mctrl = xuartps_set_mctrl,
- .get_mctrl = xuartps_get_mctrl,
- .enable_ms = xuartps_enable_ms,
-
- .start_tx = xuartps_start_tx, /* Start transmitting */
- .stop_tx = xuartps_stop_tx, /* Stop transmission */
- .stop_rx = xuartps_stop_rx, /* Stop reception */
- .tx_empty = xuartps_tx_empty, /* Transmitter busy? */
- .break_ctl = xuartps_break_ctl, /* Start/stop
- * transmitting break
- */
- .set_termios = xuartps_set_termios, /* Set termios */
- .startup = xuartps_startup, /* App opens xuartps */
- .shutdown = xuartps_shutdown, /* App closes xuartps */
- .type = xuartps_type, /* Set UART type */
- .verify_port = xuartps_verify_port, /* Verification of port
- * params
- */
- .request_port = xuartps_request_port, /* Claim resources
- * associated with a
- * xuartps port
- */
- .release_port = xuartps_release_port, /* Release resources
- * associated with a
- * xuartps port
- */
- .config_port = xuartps_config_port, /* Configure when driver
- * adds a xuartps port
- */
+static struct uart_ops cdns_uart_ops = {
+ .set_mctrl = cdns_uart_set_mctrl,
+ .get_mctrl = cdns_uart_get_mctrl,
+ .enable_ms = cdns_uart_enable_ms,
+ .start_tx = cdns_uart_start_tx,
+ .stop_tx = cdns_uart_stop_tx,
+ .stop_rx = cdns_uart_stop_rx,
+ .tx_empty = cdns_uart_tx_empty,
+ .break_ctl = cdns_uart_break_ctl,
+ .set_termios = cdns_uart_set_termios,
+ .startup = cdns_uart_startup,
+ .shutdown = cdns_uart_shutdown,
+ .type = cdns_uart_type,
+ .verify_port = cdns_uart_verify_port,
+ .request_port = cdns_uart_request_port,
+ .release_port = cdns_uart_release_port,
+ .config_port = cdns_uart_config_port,
#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = xuartps_poll_get_char,
- .poll_put_char = xuartps_poll_put_char,
+ .poll_get_char = cdns_uart_poll_get_char,
+ .poll_put_char = cdns_uart_poll_put_char,
#endif
};
-static struct uart_port xuartps_port[2];
+static struct uart_port cdns_uart_port[2];
/**
- * xuartps_get_port - Configure the port from the platform device resource
- * info
+ * cdns_uart_get_port - Configure the port from platform device resource info
+ * @id: Port id
*
- * Returns a pointer to a uart_port or NULL for failure
- **/
-static struct uart_port *xuartps_get_port(void)
+ * Return: a pointer to a uart_port or NULL for failure
+ */
+static struct uart_port *cdns_uart_get_port(int id)
{
struct uart_port *port;
- int id;
- /* Find the next unused port */
- for (id = 0; id < XUARTPS_NR_PORTS; id++)
- if (xuartps_port[id].mapbase == 0)
- break;
+ /* Try the given port id if failed use default method */
+ if (cdns_uart_port[id].mapbase != 0) {
+ /* Find the next unused port */
+ for (id = 0; id < CDNS_UART_NR_PORTS; id++)
+ if (cdns_uart_port[id].mapbase == 0)
+ break;
+ }
- if (id >= XUARTPS_NR_PORTS)
+ if (id >= CDNS_UART_NR_PORTS)
return NULL;
- port = &xuartps_port[id];
+ port = &cdns_uart_port[id];
/* At this point, we've got an empty uart_port struct, initialize it */
spin_lock_init(&port->lock);
@@ -1065,50 +1027,46 @@ static struct uart_port *xuartps_get_port(void)
port->type = PORT_UNKNOWN;
port->iotype = UPIO_MEM32;
port->flags = UPF_BOOT_AUTOCONF;
- port->ops = &xuartps_ops;
- port->fifosize = XUARTPS_FIFO_SIZE;
+ port->ops = &cdns_uart_ops;
+ port->fifosize = CDNS_UART_FIFO_SIZE;
port->line = id;
port->dev = NULL;
return port;
}
-/*-----------------------Console driver operations--------------------------*/
-
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
- * xuartps_console_wait_tx - Wait for the TX to be full
+ * cdns_uart_console_wait_tx - Wait for the TX to be full
* @port: Handle to the uart port structure
- *
- **/
-static void xuartps_console_wait_tx(struct uart_port *port)
+ */
+static void cdns_uart_console_wait_tx(struct uart_port *port)
{
- while ((xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_TXEMPTY)
- != XUARTPS_SR_TXEMPTY)
+ while ((cdns_uart_readl(CDNS_UART_SR_OFFSET) & CDNS_UART_SR_TXEMPTY)
+ != CDNS_UART_SR_TXEMPTY)
barrier();
}
/**
- * xuartps_console_putchar - write the character to the FIFO buffer
+ * cdns_uart_console_putchar - write the character to the FIFO buffer
* @port: Handle to the uart port structure
* @ch: Character to be written
- *
- **/
-static void xuartps_console_putchar(struct uart_port *port, int ch)
+ */
+static void cdns_uart_console_putchar(struct uart_port *port, int ch)
{
- xuartps_console_wait_tx(port);
- xuartps_writel(ch, XUARTPS_FIFO_OFFSET);
+ cdns_uart_console_wait_tx(port);
+ cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET);
}
/**
- * xuartps_console_write - perform write operation
- * @port: Handle to the uart port structure
+ * cdns_uart_console_write - perform write operation
+ * @co: Console handle
* @s: Pointer to character array
* @count: No of characters
- **/
-static void xuartps_console_write(struct console *co, const char *s,
+ */
+static void cdns_uart_console_write(struct console *co, const char *s,
unsigned int count)
{
- struct uart_port *port = &xuartps_port[co->index];
+ struct uart_port *port = &cdns_uart_port[co->index];
unsigned long flags;
unsigned int imr, ctrl;
int locked = 1;
@@ -1119,49 +1077,45 @@ static void xuartps_console_write(struct console *co, const char *s,
spin_lock_irqsave(&port->lock, flags);
/* save and disable interrupt */
- imr = xuartps_readl(XUARTPS_IMR_OFFSET);
- xuartps_writel(imr, XUARTPS_IDR_OFFSET);
+ imr = cdns_uart_readl(CDNS_UART_IMR_OFFSET);
+ cdns_uart_writel(imr, CDNS_UART_IDR_OFFSET);
/*
* Make sure that the tx part is enabled. Set the TX enable bit and
* clear the TX disable bit to enable the transmitter.
*/
- ctrl = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel((ctrl & ~XUARTPS_CR_TX_DIS) | XUARTPS_CR_TX_EN,
- XUARTPS_CR_OFFSET);
+ ctrl = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ cdns_uart_writel((ctrl & ~CDNS_UART_CR_TX_DIS) | CDNS_UART_CR_TX_EN,
+ CDNS_UART_CR_OFFSET);
- uart_console_write(port, s, count, xuartps_console_putchar);
- xuartps_console_wait_tx(port);
+ uart_console_write(port, s, count, cdns_uart_console_putchar);
+ cdns_uart_console_wait_tx(port);
- xuartps_writel(ctrl, XUARTPS_CR_OFFSET);
+ cdns_uart_writel(ctrl, CDNS_UART_CR_OFFSET);
- /* restore interrupt state, it seems like there may be a h/w bug
- * in that the interrupt enable register should not need to be
- * written based on the data sheet
- */
- xuartps_writel(~imr, XUARTPS_IDR_OFFSET);
- xuartps_writel(imr, XUARTPS_IER_OFFSET);
+ /* restore interrupt state */
+ cdns_uart_writel(imr, CDNS_UART_IER_OFFSET);
if (locked)
spin_unlock_irqrestore(&port->lock, flags);
}
/**
- * xuartps_console_setup - Initialize the uart to default config
+ * cdns_uart_console_setup - Initialize the uart to default config
* @co: Console handle
* @options: Initial settings of uart
*
- * Returns 0, -ENODEV if no device
- **/
-static int __init xuartps_console_setup(struct console *co, char *options)
+ * Return: 0 on success, negative errno otherwise.
+ */
+static int __init cdns_uart_console_setup(struct console *co, char *options)
{
- struct uart_port *port = &xuartps_port[co->index];
+ struct uart_port *port = &cdns_uart_port[co->index];
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
- if (co->index < 0 || co->index >= XUARTPS_NR_PORTS)
+ if (co->index < 0 || co->index >= CDNS_UART_NR_PORTS)
return -EINVAL;
if (!port->mapbase) {
@@ -1175,55 +1129,53 @@ static int __init xuartps_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
-static struct uart_driver xuartps_uart_driver;
+static struct uart_driver cdns_uart_uart_driver;
-static struct console xuartps_console = {
- .name = XUARTPS_TTY_NAME,
- .write = xuartps_console_write,
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
.device = uart_console_device,
- .setup = xuartps_console_setup,
+ .setup = cdns_uart_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
- .data = &xuartps_uart_driver,
+ .data = &cdns_uart_uart_driver,
};
/**
- * xuartps_console_init - Initialization call
+ * cdns_uart_console_init - Initialization call
*
- * Returns 0 on success, negative error otherwise
- **/
-static int __init xuartps_console_init(void)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int __init cdns_uart_console_init(void)
{
- register_console(&xuartps_console);
+ register_console(&cdns_uart_console);
return 0;
}
-console_initcall(xuartps_console_init);
+console_initcall(cdns_uart_console_init);
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
-/** Structure Definitions
- */
-static struct uart_driver xuartps_uart_driver = {
- .owner = THIS_MODULE, /* Owner */
- .driver_name = XUARTPS_NAME, /* Driver name */
- .dev_name = XUARTPS_TTY_NAME, /* Node name */
- .major = XUARTPS_MAJOR, /* Major number */
- .minor = XUARTPS_MINOR, /* Minor number */
- .nr = XUARTPS_NR_PORTS, /* Number of UART ports */
+static struct uart_driver cdns_uart_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = CDNS_UART_NAME,
+ .dev_name = CDNS_UART_TTY_NAME,
+ .major = CDNS_UART_MAJOR,
+ .minor = CDNS_UART_MINOR,
+ .nr = CDNS_UART_NR_PORTS,
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- .cons = &xuartps_console, /* Console */
+ .cons = &cdns_uart_console,
#endif
};
#ifdef CONFIG_PM_SLEEP
/**
- * xuartps_suspend - suspend event
+ * cdns_uart_suspend - suspend event
* @device: Pointer to the device structure
*
- * Returns 0
+ * Return: 0
*/
-static int xuartps_suspend(struct device *device)
+static int cdns_uart_suspend(struct device *device)
{
struct uart_port *port = dev_get_drvdata(device);
struct tty_struct *tty;
@@ -1242,23 +1194,24 @@ static int xuartps_suspend(struct device *device)
* Call the API provided in serial_core.c file which handles
* the suspend.
*/
- uart_suspend_port(&xuartps_uart_driver, port);
+ uart_suspend_port(&cdns_uart_uart_driver, port);
if (console_suspend_enabled && !may_wake) {
- struct xuartps *xuartps = port->private_data;
+ struct cdns_uart *cdns_uart = port->private_data;
- clk_disable(xuartps->refclk);
- clk_disable(xuartps->aperclk);
+ clk_disable(cdns_uart->uartclk);
+ clk_disable(cdns_uart->pclk);
} else {
unsigned long flags = 0;
spin_lock_irqsave(&port->lock, flags);
/* Empty the receive FIFO 1st before making changes */
- while (!(xuartps_readl(XUARTPS_SR_OFFSET) & XUARTPS_SR_RXEMPTY))
- xuartps_readl(XUARTPS_FIFO_OFFSET);
+ while (!(cdns_uart_readl(CDNS_UART_SR_OFFSET) &
+ CDNS_UART_SR_RXEMPTY))
+ cdns_uart_readl(CDNS_UART_FIFO_OFFSET);
/* set RX trigger level to 1 */
- xuartps_writel(1, XUARTPS_RXWM_OFFSET);
+ cdns_uart_writel(1, CDNS_UART_RXWM_OFFSET);
/* disable RX timeout interrups */
- xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IDR_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IDR_OFFSET);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -1266,12 +1219,12 @@ static int xuartps_suspend(struct device *device)
}
/**
- * xuartps_resume - Resume after a previous suspend
+ * cdns_uart_resume - Resume after a previous suspend
* @device: Pointer to the device structure
*
- * Returns 0
+ * Return: 0
*/
-static int xuartps_resume(struct device *device)
+static int cdns_uart_resume(struct device *device)
{
struct uart_port *port = dev_get_drvdata(device);
unsigned long flags = 0;
@@ -1289,87 +1242,95 @@ static int xuartps_resume(struct device *device)
}
if (console_suspend_enabled && !may_wake) {
- struct xuartps *xuartps = port->private_data;
+ struct cdns_uart *cdns_uart = port->private_data;
- clk_enable(xuartps->aperclk);
- clk_enable(xuartps->refclk);
+ clk_enable(cdns_uart->pclk);
+ clk_enable(cdns_uart->uartclk);
spin_lock_irqsave(&port->lock, flags);
/* Set TX/RX Reset */
- xuartps_writel(xuartps_readl(XUARTPS_CR_OFFSET) |
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST),
- XUARTPS_CR_OFFSET);
- while (xuartps_readl(XUARTPS_CR_OFFSET) &
- (XUARTPS_CR_TXRST | XUARTPS_CR_RXRST))
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
+ while (cdns_uart_readl(CDNS_UART_CR_OFFSET) &
+ (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
cpu_relax();
/* restore rx timeout value */
- xuartps_writel(rx_timeout, XUARTPS_RXTOUT_OFFSET);
+ cdns_uart_writel(rx_timeout, CDNS_UART_RXTOUT_OFFSET);
/* Enable Tx/Rx */
- ctrl_reg = xuartps_readl(XUARTPS_CR_OFFSET);
- xuartps_writel(
- (ctrl_reg & ~(XUARTPS_CR_TX_DIS | XUARTPS_CR_RX_DIS)) |
- (XUARTPS_CR_TX_EN | XUARTPS_CR_RX_EN),
- XUARTPS_CR_OFFSET);
+ ctrl_reg = cdns_uart_readl(CDNS_UART_CR_OFFSET);
+ ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
+ ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
+ cdns_uart_writel(ctrl_reg, CDNS_UART_CR_OFFSET);
spin_unlock_irqrestore(&port->lock, flags);
} else {
spin_lock_irqsave(&port->lock, flags);
/* restore original rx trigger level */
- xuartps_writel(rx_trigger_level, XUARTPS_RXWM_OFFSET);
+ cdns_uart_writel(rx_trigger_level, CDNS_UART_RXWM_OFFSET);
/* enable RX timeout interrupt */
- xuartps_writel(XUARTPS_IXR_TOUT, XUARTPS_IER_OFFSET);
+ cdns_uart_writel(CDNS_UART_IXR_TOUT, CDNS_UART_IER_OFFSET);
spin_unlock_irqrestore(&port->lock, flags);
}
- return uart_resume_port(&xuartps_uart_driver, port);
+ return uart_resume_port(&cdns_uart_uart_driver, port);
}
#endif /* ! CONFIG_PM_SLEEP */
-static SIMPLE_DEV_PM_OPS(xuartps_dev_pm_ops, xuartps_suspend, xuartps_resume);
+static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
+ cdns_uart_resume);
-/* ---------------------------------------------------------------------
- * Platform bus binding
- */
/**
- * xuartps_probe - Platform driver probe
+ * cdns_uart_probe - Platform driver probe
* @pdev: Pointer to the platform device structure
*
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_probe(struct platform_device *pdev)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_probe(struct platform_device *pdev)
{
- int rc;
+ int rc, id;
struct uart_port *port;
struct resource *res, *res2;
- struct xuartps *xuartps_data;
+ struct cdns_uart *cdns_uart_data;
- xuartps_data = devm_kzalloc(&pdev->dev, sizeof(*xuartps_data),
+ cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
GFP_KERNEL);
- if (!xuartps_data)
+ if (!cdns_uart_data)
return -ENOMEM;
- xuartps_data->aperclk = devm_clk_get(&pdev->dev, "aper_clk");
- if (IS_ERR(xuartps_data->aperclk)) {
- dev_err(&pdev->dev, "aper_clk clock not found.\n");
- return PTR_ERR(xuartps_data->aperclk);
+ cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(cdns_uart_data->pclk)) {
+ cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
+ if (!IS_ERR(cdns_uart_data->pclk))
+ dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
}
- xuartps_data->refclk = devm_clk_get(&pdev->dev, "ref_clk");
- if (IS_ERR(xuartps_data->refclk)) {
- dev_err(&pdev->dev, "ref_clk clock not found.\n");
- return PTR_ERR(xuartps_data->refclk);
+ if (IS_ERR(cdns_uart_data->pclk)) {
+ dev_err(&pdev->dev, "pclk clock not found.\n");
+ return PTR_ERR(cdns_uart_data->pclk);
}
- rc = clk_prepare_enable(xuartps_data->aperclk);
+ cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
+ if (IS_ERR(cdns_uart_data->uartclk)) {
+ cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
+ if (!IS_ERR(cdns_uart_data->uartclk))
+ dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
+ }
+ if (IS_ERR(cdns_uart_data->uartclk)) {
+ dev_err(&pdev->dev, "uart_clk clock not found.\n");
+ return PTR_ERR(cdns_uart_data->uartclk);
+ }
+
+ rc = clk_prepare_enable(cdns_uart_data->pclk);
if (rc) {
- dev_err(&pdev->dev, "Unable to enable APER clock.\n");
+ dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
return rc;
}
- rc = clk_prepare_enable(xuartps_data->refclk);
+ rc = clk_prepare_enable(cdns_uart_data->uartclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable device clock.\n");
- goto err_out_clk_dis_aper;
+ goto err_out_clk_dis_pclk;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1385,15 +1346,19 @@ static int xuartps_probe(struct platform_device *pdev)
}
#ifdef CONFIG_COMMON_CLK
- xuartps_data->clk_rate_change_nb.notifier_call =
- xuartps_clk_notifier_cb;
- if (clk_notifier_register(xuartps_data->refclk,
- &xuartps_data->clk_rate_change_nb))
+ cdns_uart_data->clk_rate_change_nb.notifier_call =
+ cdns_uart_clk_notifier_cb;
+ if (clk_notifier_register(cdns_uart_data->uartclk,
+ &cdns_uart_data->clk_rate_change_nb))
dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
#endif
+ /* Look for a serialN alias */
+ id = of_alias_get_id(pdev->dev.of_node, "serial");
+ if (id < 0)
+ id = 0;
/* Initialize the port structure */
- port = xuartps_get_port();
+ port = cdns_uart_get_port(id);
if (!port) {
dev_err(&pdev->dev, "Cannot get uart_port structure\n");
@@ -1407,11 +1372,11 @@ static int xuartps_probe(struct platform_device *pdev)
port->mapbase = res->start;
port->irq = res2->start;
port->dev = &pdev->dev;
- port->uartclk = clk_get_rate(xuartps_data->refclk);
- port->private_data = xuartps_data;
- xuartps_data->port = port;
+ port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
+ port->private_data = cdns_uart_data;
+ cdns_uart_data->port = port;
platform_set_drvdata(pdev, port);
- rc = uart_add_one_port(&xuartps_uart_driver, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
@@ -1422,103 +1387,89 @@ static int xuartps_probe(struct platform_device *pdev)
err_out_notif_unreg:
#ifdef CONFIG_COMMON_CLK
- clk_notifier_unregister(xuartps_data->refclk,
- &xuartps_data->clk_rate_change_nb);
+ clk_notifier_unregister(cdns_uart_data->uartclk,
+ &cdns_uart_data->clk_rate_change_nb);
#endif
err_out_clk_disable:
- clk_disable_unprepare(xuartps_data->refclk);
-err_out_clk_dis_aper:
- clk_disable_unprepare(xuartps_data->aperclk);
+ clk_disable_unprepare(cdns_uart_data->uartclk);
+err_out_clk_dis_pclk:
+ clk_disable_unprepare(cdns_uart_data->pclk);
return rc;
}
/**
- * xuartps_remove - called when the platform driver is unregistered
+ * cdns_uart_remove - called when the platform driver is unregistered
* @pdev: Pointer to the platform device structure
*
- * Returns 0 on success, negative error otherwise
- **/
-static int xuartps_remove(struct platform_device *pdev)
+ * Return: 0 on success, negative errno otherwise
+ */
+static int cdns_uart_remove(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
- struct xuartps *xuartps_data = port->private_data;
+ struct cdns_uart *cdns_uart_data = port->private_data;
int rc;
- /* Remove the xuartps port from the serial core */
+ /* Remove the cdns_uart port from the serial core */
#ifdef CONFIG_COMMON_CLK
- clk_notifier_unregister(xuartps_data->refclk,
- &xuartps_data->clk_rate_change_nb);
+ clk_notifier_unregister(cdns_uart_data->uartclk,
+ &cdns_uart_data->clk_rate_change_nb);
#endif
- rc = uart_remove_one_port(&xuartps_uart_driver, port);
+ rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
port->mapbase = 0;
- clk_disable_unprepare(xuartps_data->refclk);
- clk_disable_unprepare(xuartps_data->aperclk);
+ clk_disable_unprepare(cdns_uart_data->uartclk);
+ clk_disable_unprepare(cdns_uart_data->pclk);
return rc;
}
/* Match table for of_platform binding */
-static struct of_device_id xuartps_of_match[] = {
+static struct of_device_id cdns_uart_of_match[] = {
{ .compatible = "xlnx,xuartps", },
+ { .compatible = "cdns,uart-r1p8", },
{}
};
-MODULE_DEVICE_TABLE(of, xuartps_of_match);
+MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
-static struct platform_driver xuartps_platform_driver = {
- .probe = xuartps_probe, /* Probe method */
- .remove = xuartps_remove, /* Detach method */
+static struct platform_driver cdns_uart_platform_driver = {
+ .probe = cdns_uart_probe,
+ .remove = cdns_uart_remove,
.driver = {
.owner = THIS_MODULE,
- .name = XUARTPS_NAME, /* Driver name */
- .of_match_table = xuartps_of_match,
- .pm = &xuartps_dev_pm_ops,
+ .name = CDNS_UART_NAME,
+ .of_match_table = cdns_uart_of_match,
+ .pm = &cdns_uart_dev_pm_ops,
},
};
-/* ---------------------------------------------------------------------
- * Module Init and Exit
- */
-/**
- * xuartps_init - Initial driver registration call
- *
- * Returns whether the registration was successful or not
- **/
-static int __init xuartps_init(void)
+static int __init cdns_uart_init(void)
{
int retval = 0;
- /* Register the xuartps driver with the serial core */
- retval = uart_register_driver(&xuartps_uart_driver);
+ /* Register the cdns_uart driver with the serial core */
+ retval = uart_register_driver(&cdns_uart_uart_driver);
if (retval)
return retval;
/* Register the platform driver */
- retval = platform_driver_register(&xuartps_platform_driver);
+ retval = platform_driver_register(&cdns_uart_platform_driver);
if (retval)
- uart_unregister_driver(&xuartps_uart_driver);
+ uart_unregister_driver(&cdns_uart_uart_driver);
return retval;
}
-/**
- * xuartps_exit - Driver unregistration call
- **/
-static void __exit xuartps_exit(void)
+static void __exit cdns_uart_exit(void)
{
- /* The order of unregistration is important. Unregister the
- * UART driver before the platform driver crashes the system.
- */
-
/* Unregister the platform driver */
- platform_driver_unregister(&xuartps_platform_driver);
+ platform_driver_unregister(&cdns_uart_platform_driver);
- /* Unregister the xuartps driver */
- uart_unregister_driver(&xuartps_uart_driver);
+ /* Unregister the cdns_uart driver */
+ uart_unregister_driver(&cdns_uart_uart_driver);
}
-module_init(xuartps_init);
-module_exit(xuartps_exit);
+module_init(cdns_uart_init);
+module_exit(cdns_uart_exit);
-MODULE_DESCRIPTION("Driver for PS UART");
+MODULE_DESCRIPTION("Driver for Cadence UART");
MODULE_AUTHOR("Xilinx Inc.");
MODULE_LICENSE("GPL");
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 2978ca596a7f..610b720d3b91 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -179,7 +179,6 @@ struct uni_pagedir {
unsigned long sum;
unsigned char *inverse_translations[4];
u16 *inverse_trans_unicode;
- int readonly;
};
static struct uni_pagedir *dflt;
@@ -262,7 +261,7 @@ u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode)
int m;
if (glyph < 0 || glyph >= MAX_GLYPH)
return 0;
- else if (!(p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc))
+ else if (!(p = *conp->vc_uni_pagedir_loc))
return glyph;
else if (use_unicode) {
if (!p->inverse_trans_unicode)
@@ -287,7 +286,7 @@ static void update_user_maps(void)
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons_allocated(i))
continue;
- p = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
+ p = *vc_cons[i].d->vc_uni_pagedir_loc;
if (p && p != q) {
set_inverse_transl(vc_cons[i].d, p, USER_MAP);
set_inverse_trans_unicode(vc_cons[i].d, p);
@@ -418,10 +417,10 @@ void con_free_unimap(struct vc_data *vc)
{
struct uni_pagedir *p;
- p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+ p = *vc->vc_uni_pagedir_loc;
if (!p)
return;
- *vc->vc_uni_pagedir_loc = 0;
+ *vc->vc_uni_pagedir_loc = NULL;
if (--p->refcount)
return;
con_release_unimap(p);
@@ -436,7 +435,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons_allocated(i))
continue;
- q = (struct uni_pagedir *)*vc_cons[i].d->vc_uni_pagedir_loc;
+ q = *vc_cons[i].d->vc_uni_pagedir_loc;
if (!q || q == p || q->sum != p->sum)
continue;
for (j = 0; j < 32; j++) {
@@ -459,7 +458,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
}
if (j == 32) {
q->refcount++;
- *conp->vc_uni_pagedir_loc = (unsigned long)q;
+ *conp->vc_uni_pagedir_loc = q;
con_release_unimap(p);
kfree(p);
return 1;
@@ -500,10 +499,7 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
{
struct uni_pagedir *p, *q;
- p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
- if (p && p->readonly)
- return -EIO;
-
+ p = *vc->vc_uni_pagedir_loc;
if (!p || --p->refcount) {
q = kzalloc(sizeof(*p), GFP_KERNEL);
if (!q) {
@@ -512,7 +508,7 @@ static int con_do_clear_unimap(struct vc_data *vc, struct unimapinit *ui)
return -ENOMEM;
}
q->refcount=1;
- *vc->vc_uni_pagedir_loc = (unsigned long)q;
+ *vc->vc_uni_pagedir_loc = q;
} else {
if (p == dflt) dflt = NULL;
p->refcount++;
@@ -536,19 +532,13 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
int err = 0, err1, i;
struct uni_pagedir *p, *q;
+ if (!ct)
+ return 0;
+
console_lock();
/* Save original vc_unipagdir_loc in case we allocate a new one */
- p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
- if (p->readonly) {
- console_unlock();
- return -EIO;
- }
-
- if (!ct) {
- console_unlock();
- return 0;
- }
+ p = *vc->vc_uni_pagedir_loc;
if (p->refcount > 1) {
int j, k;
@@ -564,7 +554,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
* Since refcount was > 1, con_clear_unimap() allocated a
* a new uni_pagedir for this vc. Re: p != q
*/
- q = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+ q = *vc->vc_uni_pagedir_loc;
/*
* uni_pgdir is a 32*32*64 table with rows allocated
@@ -586,7 +576,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
err1 = con_insert_unipair(q, l, p2[k]);
if (err1) {
p->refcount++;
- *vc->vc_uni_pagedir_loc = (unsigned long)p;
+ *vc->vc_uni_pagedir_loc = p;
con_release_unimap(q);
kfree(q);
console_unlock();
@@ -655,12 +645,12 @@ int con_set_default_unimap(struct vc_data *vc)
struct uni_pagedir *p;
if (dflt) {
- p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+ p = *vc->vc_uni_pagedir_loc;
if (p == dflt)
return 0;
dflt->refcount++;
- *vc->vc_uni_pagedir_loc = (unsigned long)dflt;
+ *vc->vc_uni_pagedir_loc = dflt;
if (p && !--p->refcount) {
con_release_unimap(p);
kfree(p);
@@ -674,7 +664,7 @@ int con_set_default_unimap(struct vc_data *vc)
if (err)
return err;
- p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+ p = *vc->vc_uni_pagedir_loc;
q = dfont_unitable;
for (i = 0; i < 256; i++)
@@ -685,7 +675,7 @@ int con_set_default_unimap(struct vc_data *vc)
}
if (con_unify_unimap(vc, p)) {
- dflt = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+ dflt = *vc->vc_uni_pagedir_loc;
return err;
}
@@ -713,9 +703,9 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc)
if (*dst_vc->vc_uni_pagedir_loc == *src_vc->vc_uni_pagedir_loc)
return 0;
con_free_unimap(dst_vc);
- q = (struct uni_pagedir *)*src_vc->vc_uni_pagedir_loc;
+ q = *src_vc->vc_uni_pagedir_loc;
q->refcount++;
- *dst_vc->vc_uni_pagedir_loc = (long)q;
+ *dst_vc->vc_uni_pagedir_loc = q;
return 0;
}
EXPORT_SYMBOL(con_copy_unimap);
@@ -737,7 +727,7 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
ect = 0;
if (*vc->vc_uni_pagedir_loc) {
- p = (struct uni_pagedir *)*vc->vc_uni_pagedir_loc;
+ p = *vc->vc_uni_pagedir_loc;
for (i = 0; i < 32; i++)
if ((p1 = p->uni_pgdir[i]))
for (j = 0; j < 32; j++)
@@ -810,7 +800,7 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
if (!*conp->vc_uni_pagedir_loc)
return -3;
- p = (struct uni_pagedir *)*conp->vc_uni_pagedir_loc;
+ p = *conp->vc_uni_pagedir_loc;
if ((p1 = p->uni_pgdir[ucs >> 11]) &&
(p2 = p1[(ucs >> 6) & 0x1f]) &&
(h = p2[ucs & 0x3f]) < MAX_GLYPH)
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 3ad0b61e35b4..5e0f6ff2e2f5 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -735,7 +735,7 @@ static void visual_init(struct vc_data *vc, int num, int init)
vc->vc_num = num;
vc->vc_display_fg = &master_display_fg;
vc->vc_uni_pagedir_loc = &vc->vc_uni_pagedir;
- vc->vc_uni_pagedir = 0;
+ vc->vc_uni_pagedir = NULL;
vc->vc_hi_font_mask = 0;
vc->vc_complement_mask = 0;
vc->vc_can_do_color = 0;
@@ -1231,6 +1231,52 @@ static void default_attr(struct vc_data *vc)
vc->vc_color = vc->vc_def_color;
}
+struct rgb { u8 r; u8 g; u8 b; };
+
+struct rgb rgb_from_256(int i)
+{
+ struct rgb c;
+ if (i < 8) { /* Standard colours. */
+ c.r = i&1 ? 0xaa : 0x00;
+ c.g = i&2 ? 0xaa : 0x00;
+ c.b = i&4 ? 0xaa : 0x00;
+ } else if (i < 16) {
+ c.r = i&1 ? 0xff : 0x55;
+ c.g = i&2 ? 0xff : 0x55;
+ c.b = i&4 ? 0xff : 0x55;
+ } else if (i < 232) { /* 6x6x6 colour cube. */
+ c.r = (i - 16) / 36 * 85 / 2;
+ c.g = (i - 16) / 6 % 6 * 85 / 2;
+ c.b = (i - 16) % 6 * 85 / 2;
+ } else /* Grayscale ramp. */
+ c.r = c.g = c.b = i * 10 - 2312;
+ return c;
+}
+
+static void rgb_foreground(struct vc_data *vc, struct rgb c)
+{
+ u8 hue, max = c.r;
+ if (c.g > max)
+ max = c.g;
+ if (c.b > max)
+ max = c.b;
+ hue = (c.r > max/2 ? 4 : 0)
+ | (c.g > max/2 ? 2 : 0)
+ | (c.b > max/2 ? 1 : 0);
+ if (hue == 7 && max <= 0x55)
+ hue = 0, vc->vc_intensity = 2;
+ else
+ vc->vc_intensity = (max > 0xaa) + 1;
+ vc->vc_color = (vc->vc_color & 0xf0) | hue;
+}
+
+static void rgb_background(struct vc_data *vc, struct rgb c)
+{
+ /* For backgrounds, err on the dark side. */
+ vc->vc_color = (vc->vc_color & 0x0f)
+ | (c.r&0x80) >> 1 | (c.g&0x80) >> 2 | (c.b&0x80) >> 3;
+}
+
/* console_lock is held */
static void csi_m(struct vc_data *vc)
{
@@ -1302,8 +1348,7 @@ static void csi_m(struct vc_data *vc)
case 27:
vc->vc_reverse = 0;
break;
- case 38:
- case 48: /* ITU T.416
+ case 38: /* ITU T.416
* Higher colour modes.
* They break the usual properties of SGR codes
* and thus need to be detected and ignored by
@@ -1315,15 +1360,41 @@ static void csi_m(struct vc_data *vc)
i++;
if (i > vc->vc_npar)
break;
- if (vc->vc_par[i] == 5) /* 256 colours */
- i++; /* ubiquitous */
- else if (vc->vc_par[i] == 2) /* 24 bit colours */
- i += 3; /* extremely rare */
+ if (vc->vc_par[i] == 5 && /* 256 colours */
+ i < vc->vc_npar) { /* ubiquitous */
+ i++;
+ rgb_foreground(vc,
+ rgb_from_256(vc->vc_par[i]));
+ } else if (vc->vc_par[i] == 2 && /* 24 bit */
+ i <= vc->vc_npar + 3) {/* extremely rare */
+ struct rgb c = {r:vc->vc_par[i+1],
+ g:vc->vc_par[i+2],
+ b:vc->vc_par[i+3]};
+ rgb_foreground(vc, c);
+ i += 3;
+ }
/* Subcommands 3 (CMY) and 4 (CMYK) are so insane
- * that detecting them is not worth the few extra
- * bytes of kernel's size.
+ * there's no point in supporting them.
*/
break;
+ case 48:
+ i++;
+ if (i > vc->vc_npar)
+ break;
+ if (vc->vc_par[i] == 5 && /* 256 colours */
+ i < vc->vc_npar) {
+ i++;
+ rgb_background(vc,
+ rgb_from_256(vc->vc_par[i]));
+ } else if (vc->vc_par[i] == 2 && /* 24 bit */
+ i <= vc->vc_npar + 3) {
+ struct rgb c = {r:vc->vc_par[i+1],
+ g:vc->vc_par[i+2],
+ b:vc->vc_par[i+3]};
+ rgb_background(vc, c);
+ i += 3;
+ }
+ break;
case 39:
vc->vc_color = (vc->vc_def_color & 0x0f) | (vc->vc_color & 0xf0);
break;
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 9d8feac67637..f267284b423b 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -87,7 +87,8 @@ static void vgacon_save_screen(struct vc_data *c);
static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
int lines);
static void vgacon_invert_region(struct vc_data *c, u16 * p, int count);
-static unsigned long vgacon_uni_pagedir[2];
+static struct uni_pagedir *vgacon_uni_pagedir;
+static int vgacon_refcount;
/* Description of the hardware situation */
static int vga_init_done __read_mostly;
@@ -553,7 +554,7 @@ static const char *vgacon_startup(void)
static void vgacon_init(struct vc_data *c, int init)
{
- unsigned long p;
+ struct uni_pagedir *p;
/*
* We cannot be loaded as a module, therefore init is always 1,
@@ -575,12 +576,12 @@ static void vgacon_init(struct vc_data *c, int init)
if (vga_512_chars)
c->vc_hi_font_mask = 0x0800;
p = *c->vc_uni_pagedir_loc;
- if (c->vc_uni_pagedir_loc == &c->vc_uni_pagedir ||
- !--c->vc_uni_pagedir_loc[1])
+ if (c->vc_uni_pagedir_loc != &vgacon_uni_pagedir) {
con_free_unimap(c);
- c->vc_uni_pagedir_loc = vgacon_uni_pagedir;
- vgacon_uni_pagedir[1]++;
- if (!vgacon_uni_pagedir[0] && p)
+ c->vc_uni_pagedir_loc = &vgacon_uni_pagedir;
+ vgacon_refcount++;
+ }
+ if (!vgacon_uni_pagedir && p)
con_set_default_unimap(c);
/* Only set the default if the user didn't deliberately override it */
@@ -597,7 +598,7 @@ static void vgacon_deinit(struct vc_data *c)
vga_set_mem_top(c);
}
- if (!--vgacon_uni_pagedir[1])
+ if (!--vgacon_refcount)
con_free_unimap(c);
c->vc_uni_pagedir_loc = &c->vc_uni_pagedir;
con_set_default_unimap(c);
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h
index 7f0c32908568..e859c98d1767 100644
--- a/include/linux/console_struct.h
+++ b/include/linux/console_struct.h
@@ -17,6 +17,7 @@
#include <linux/workqueue.h>
struct vt_struct;
+struct uni_pagedir;
#define NPAR 16
@@ -104,8 +105,8 @@ struct vc_data {
unsigned int vc_bell_pitch; /* Console bell pitch */
unsigned int vc_bell_duration; /* Console bell duration */
struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */
- unsigned long vc_uni_pagedir;
- unsigned long *vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
+ struct uni_pagedir *vc_uni_pagedir;
+ struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */
bool vc_panic_force_write; /* when oops/panic this VC can accept forced output/blanking */
/* additional information is in vt_kern.h */
};
diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h
index 1466443797d7..4b452c6a2f7b 100644
--- a/include/linux/platform_data/atmel.h
+++ b/include/linux/platform_data/atmel.h
@@ -84,7 +84,6 @@ struct atmel_uart_data {
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virt. base address, if any */
struct serial_rs485 rs485; /* rs485 settings */
- int rts_gpio; /* optional RTS GPIO */
};
/* CAN */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f729be981da0..7a15b5b24c0b 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -285,6 +285,22 @@ static inline int uart_poll_timeout(struct uart_port *port)
/*
* Console helpers.
*/
+struct earlycon_device {
+ struct console *con;
+ struct uart_port port;
+ char options[16]; /* e.g., 115200n8 */
+ unsigned int baud;
+};
+int setup_earlycon(char *buf, const char *match,
+ int (*setup)(struct earlycon_device *, const char *));
+
+#define EARLYCON_DECLARE(name, func) \
+static int __init name ## _setup_earlycon(char *buf) \
+{ \
+ return setup_earlycon(buf, __stringify(name), func); \
+} \
+early_param("earlycon", name ## _setup_earlycon);
+
struct uart_port *uart_get_console(struct uart_port *ports, int nr,
struct console *c);
void uart_parse_options(char *options, int *baud, int *parity, int *bits,
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index add26da2faeb..00c9d688d7b7 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -92,7 +92,10 @@
* This function is called by the low-level tty driver to signal
* that line discpline should try to send more characters to the
* low-level driver for transmission. If the line discpline does
- * not have any more data to send, it can just return.
+ * not have any more data to send, it can just return. If the line
+ * discipline does have some data to send, please arise a tasklet
+ * or workqueue to do the real data transfer. Do not send data in
+ * this hook, it may leads to a deadlock.
*
* int (*hangup)(struct tty_struct *)
*
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index b47dba2c1e6f..5820269aa132 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -211,7 +211,7 @@
/* VIA VT8500 SoC */
#define PORT_VT8500 97
-/* Xilinx PSS UART */
+/* Cadence (Xilinx Zynq) UART */
#define PORT_XUARTPS 98
/* Atheros AR933X SoC */
@@ -238,4 +238,10 @@
/* Tilera TILE-Gx UART */
#define PORT_TILEGX 106
+/* MEN 16z135 UART */
+#define PORT_MEN_Z135 107
+
+/* SC16IS74xx */
+#define PORT_SC16IS7XX 108
+
#endif /* _UAPILINUX_SERIAL_CORE_H */
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index e6322605b138..99b47058816a 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -32,7 +32,7 @@
#define UART_IIR 2 /* In: Interrupt ID Register */
#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
-#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
+#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */
#define UART_IIR_MSI 0x00 /* Modem status interrupt */
#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 7228258b85ec..221229cf0190 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2413,6 +2413,7 @@ int unregister_console(struct console *console)
if (console_drivers != NULL && console->flags & CON_CONSDEV)
console_drivers->flags |= CON_CONSDEV;
+ console->flags &= ~CON_ENABLED;
console_unlock();
console_sysfs_notify();
return res;