summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/mmc/core/Makefile2
-rw-r--r--drivers/mmc/core/core.c242
-rw-r--r--drivers/mmc/core/core.h1
-rw-r--r--drivers/mmc/core/regulator.c261
-rw-r--r--include/linux/mmc/host.h1
5 files changed, 263 insertions, 244 deletions
diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
index abba078f7f49..95ffe008ebdf 100644
--- a/drivers/mmc/core/Makefile
+++ b/drivers/mmc/core/Makefile
@@ -8,7 +8,7 @@ mmc_core-y := core.o bus.o host.o \
mmc.o mmc_ops.o sd.o sd_ops.o \
sdio.o sdio_ops.o sdio_bus.o \
sdio_cis.o sdio_io.o sdio_irq.o \
- slot-gpio.o
+ slot-gpio.o regulator.o
mmc_core-$(CONFIG_OF) += pwrseq.o
obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o
obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index de0f1a1f0a63..f796a6afb19b 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -21,7 +21,6 @@
#include <linux/leds.h>
#include <linux/scatterlist.h>
#include <linux/log2.h>
-#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeup.h>
#include <linux/suspend.h>
@@ -1112,7 +1111,6 @@ u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max)
return mask;
}
-EXPORT_SYMBOL(mmc_vddrange_to_ocrmask);
#ifdef CONFIG_OF
@@ -1190,246 +1188,6 @@ struct device_node *mmc_of_find_child_device(struct mmc_host *host,
return NULL;
}
-#ifdef CONFIG_REGULATOR
-
-/**
- * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage
- * @vdd_bit: OCR bit number
- * @min_uV: minimum voltage value (mV)
- * @max_uV: maximum voltage value (mV)
- *
- * This function returns the voltage range according to the provided OCR
- * bit number. If conversion is not possible a negative errno value returned.
- */
-static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV)
-{
- int tmp;
-
- if (!vdd_bit)
- return -EINVAL;
-
- /*
- * REVISIT mmc_vddrange_to_ocrmask() may have set some
- * bits this regulator doesn't quite support ... don't
- * be too picky, most cards and regulators are OK with
- * a 0.1V range goof (it's a small error percentage).
- */
- tmp = vdd_bit - ilog2(MMC_VDD_165_195);
- if (tmp == 0) {
- *min_uV = 1650 * 1000;
- *max_uV = 1950 * 1000;
- } else {
- *min_uV = 1900 * 1000 + tmp * 100 * 1000;
- *max_uV = *min_uV + 100 * 1000;
- }
-
- return 0;
-}
-
-/**
- * mmc_regulator_get_ocrmask - return mask of supported voltages
- * @supply: regulator to use
- *
- * This returns either a negative errno, or a mask of voltages that
- * can be provided to MMC/SD/SDIO devices using the specified voltage
- * regulator. This would normally be called before registering the
- * MMC host adapter.
- */
-int mmc_regulator_get_ocrmask(struct regulator *supply)
-{
- int result = 0;
- int count;
- int i;
- int vdd_uV;
- int vdd_mV;
-
- count = regulator_count_voltages(supply);
- if (count < 0)
- return count;
-
- for (i = 0; i < count; i++) {
- vdd_uV = regulator_list_voltage(supply, i);
- if (vdd_uV <= 0)
- continue;
-
- vdd_mV = vdd_uV / 1000;
- result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
- }
-
- if (!result) {
- vdd_uV = regulator_get_voltage(supply);
- if (vdd_uV <= 0)
- return vdd_uV;
-
- vdd_mV = vdd_uV / 1000;
- result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
- }
-
- return result;
-}
-EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
-
-/**
- * mmc_regulator_set_ocr - set regulator to match host->ios voltage
- * @mmc: the host to regulate
- * @supply: regulator to use
- * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
- *
- * Returns zero on success, else negative errno.
- *
- * MMC host drivers may use this to enable or disable a regulator using
- * a particular supply voltage. This would normally be called from the
- * set_ios() method.
- */
-int mmc_regulator_set_ocr(struct mmc_host *mmc,
- struct regulator *supply,
- unsigned short vdd_bit)
-{
- int result = 0;
- int min_uV, max_uV;
-
- if (vdd_bit) {
- mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV);
-
- result = regulator_set_voltage(supply, min_uV, max_uV);
- if (result == 0 && !mmc->regulator_enabled) {
- result = regulator_enable(supply);
- if (!result)
- mmc->regulator_enabled = true;
- }
- } else if (mmc->regulator_enabled) {
- result = regulator_disable(supply);
- if (result == 0)
- mmc->regulator_enabled = false;
- }
-
- if (result)
- dev_err(mmc_dev(mmc),
- "could not set regulator OCR (%d)\n", result);
- return result;
-}
-EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
-
-static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator,
- int min_uV, int target_uV,
- int max_uV)
-{
- /*
- * Check if supported first to avoid errors since we may try several
- * signal levels during power up and don't want to show errors.
- */
- if (!regulator_is_supported_voltage(regulator, min_uV, max_uV))
- return -EINVAL;
-
- return regulator_set_voltage_triplet(regulator, min_uV, target_uV,
- max_uV);
-}
-
-/**
- * mmc_regulator_set_vqmmc - Set VQMMC as per the ios
- *
- * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible.
- * That will match the behavior of old boards where VQMMC and VMMC were supplied
- * by the same supply. The Bus Operating conditions for 3.3V signaling in the
- * SD card spec also define VQMMC in terms of VMMC.
- * If this is not possible we'll try the full 2.7-3.6V of the spec.
- *
- * For 1.2V and 1.8V signaling we'll try to get as close as possible to the
- * requested voltage. This is definitely a good idea for UHS where there's a
- * separate regulator on the card that's trying to make 1.8V and it's best if
- * we match.
- *
- * This function is expected to be used by a controller's
- * start_signal_voltage_switch() function.
- */
-int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
-{
- struct device *dev = mmc_dev(mmc);
- int ret, volt, min_uV, max_uV;
-
- /* If no vqmmc supply then we can't change the voltage */
- if (IS_ERR(mmc->supply.vqmmc))
- return -EINVAL;
-
- switch (ios->signal_voltage) {
- case MMC_SIGNAL_VOLTAGE_120:
- return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
- 1100000, 1200000, 1300000);
- case MMC_SIGNAL_VOLTAGE_180:
- return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
- 1700000, 1800000, 1950000);
- case MMC_SIGNAL_VOLTAGE_330:
- ret = mmc_ocrbitnum_to_vdd(mmc->ios.vdd, &volt, &max_uV);
- if (ret < 0)
- return ret;
-
- dev_dbg(dev, "%s: found vmmc voltage range of %d-%duV\n",
- __func__, volt, max_uV);
-
- min_uV = max(volt - 300000, 2700000);
- max_uV = min(max_uV + 200000, 3600000);
-
- /*
- * Due to a limitation in the current implementation of
- * regulator_set_voltage_triplet() which is taking the lowest
- * voltage possible if below the target, search for a suitable
- * voltage in two steps and try to stay close to vmmc
- * with a 0.3V tolerance at first.
- */
- if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
- min_uV, volt, max_uV))
- return 0;
-
- return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
- 2700000, volt, 3600000);
- default:
- return -EINVAL;
- }
-}
-EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc);
-
-#endif /* CONFIG_REGULATOR */
-
-/**
- * mmc_regulator_get_supply - try to get VMMC and VQMMC regulators for a host
- * @mmc: the host to regulate
- *
- * Returns 0 or errno. errno should be handled, it is either a critical error
- * or -EPROBE_DEFER. 0 means no critical error but it does not mean all
- * regulators have been found because they all are optional. If you require
- * certain regulators, you need to check separately in your driver if they got
- * populated after calling this function.
- */
-int mmc_regulator_get_supply(struct mmc_host *mmc)
-{
- struct device *dev = mmc_dev(mmc);
- int ret;
-
- mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
- mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
-
- if (IS_ERR(mmc->supply.vmmc)) {
- if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_dbg(dev, "No vmmc regulator found\n");
- } else {
- ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
- if (ret > 0)
- mmc->ocr_avail = ret;
- else
- dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
- }
-
- if (IS_ERR(mmc->supply.vqmmc)) {
- if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dev_dbg(dev, "No vqmmc regulator found\n");
- }
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
-
/*
* Mask off any voltages we don't support and select
* the lowest voltage
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 8fb6bc37f808..b5083b13d594 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -59,6 +59,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr);
void mmc_power_off(struct mmc_host *host);
void mmc_power_cycle(struct mmc_host *host, u32 ocr);
void mmc_set_initial_state(struct mmc_host *host);
+u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
static inline void mmc_delay(unsigned int ms)
{
diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c
new file mode 100644
index 000000000000..80f95f86ca0e
--- /dev/null
+++ b/drivers/mmc/core/regulator.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Helper functions for MMC regulators.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/log2.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/mmc/host.h>
+
+#include "core.h"
+#include "host.h"
+
+#ifdef CONFIG_REGULATOR
+
+/**
+ * mmc_ocrbitnum_to_vdd - Convert a OCR bit number to its voltage
+ * @vdd_bit: OCR bit number
+ * @min_uV: minimum voltage value (mV)
+ * @max_uV: maximum voltage value (mV)
+ *
+ * This function returns the voltage range according to the provided OCR
+ * bit number. If conversion is not possible a negative errno value returned.
+ */
+static int mmc_ocrbitnum_to_vdd(int vdd_bit, int *min_uV, int *max_uV)
+{
+ int tmp;
+
+ if (!vdd_bit)
+ return -EINVAL;
+
+ /*
+ * REVISIT mmc_vddrange_to_ocrmask() may have set some
+ * bits this regulator doesn't quite support ... don't
+ * be too picky, most cards and regulators are OK with
+ * a 0.1V range goof (it's a small error percentage).
+ */
+ tmp = vdd_bit - ilog2(MMC_VDD_165_195);
+ if (tmp == 0) {
+ *min_uV = 1650 * 1000;
+ *max_uV = 1950 * 1000;
+ } else {
+ *min_uV = 1900 * 1000 + tmp * 100 * 1000;
+ *max_uV = *min_uV + 100 * 1000;
+ }
+
+ return 0;
+}
+
+/**
+ * mmc_regulator_get_ocrmask - return mask of supported voltages
+ * @supply: regulator to use
+ *
+ * This returns either a negative errno, or a mask of voltages that
+ * can be provided to MMC/SD/SDIO devices using the specified voltage
+ * regulator. This would normally be called before registering the
+ * MMC host adapter.
+ */
+int mmc_regulator_get_ocrmask(struct regulator *supply)
+{
+ int result = 0;
+ int count;
+ int i;
+ int vdd_uV;
+ int vdd_mV;
+
+ count = regulator_count_voltages(supply);
+ if (count < 0)
+ return count;
+
+ for (i = 0; i < count; i++) {
+ vdd_uV = regulator_list_voltage(supply, i);
+ if (vdd_uV <= 0)
+ continue;
+
+ vdd_mV = vdd_uV / 1000;
+ result |= mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
+ }
+
+ if (!result) {
+ vdd_uV = regulator_get_voltage(supply);
+ if (vdd_uV <= 0)
+ return vdd_uV;
+
+ vdd_mV = vdd_uV / 1000;
+ result = mmc_vddrange_to_ocrmask(vdd_mV, vdd_mV);
+ }
+
+ return result;
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_get_ocrmask);
+
+/**
+ * mmc_regulator_set_ocr - set regulator to match host->ios voltage
+ * @mmc: the host to regulate
+ * @supply: regulator to use
+ * @vdd_bit: zero for power off, else a bit number (host->ios.vdd)
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * MMC host drivers may use this to enable or disable a regulator using
+ * a particular supply voltage. This would normally be called from the
+ * set_ios() method.
+ */
+int mmc_regulator_set_ocr(struct mmc_host *mmc,
+ struct regulator *supply,
+ unsigned short vdd_bit)
+{
+ int result = 0;
+ int min_uV, max_uV;
+
+ if (vdd_bit) {
+ mmc_ocrbitnum_to_vdd(vdd_bit, &min_uV, &max_uV);
+
+ result = regulator_set_voltage(supply, min_uV, max_uV);
+ if (result == 0 && !mmc->regulator_enabled) {
+ result = regulator_enable(supply);
+ if (!result)
+ mmc->regulator_enabled = true;
+ }
+ } else if (mmc->regulator_enabled) {
+ result = regulator_disable(supply);
+ if (result == 0)
+ mmc->regulator_enabled = false;
+ }
+
+ if (result)
+ dev_err(mmc_dev(mmc),
+ "could not set regulator OCR (%d)\n", result);
+ return result;
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_set_ocr);
+
+static int mmc_regulator_set_voltage_if_supported(struct regulator *regulator,
+ int min_uV, int target_uV,
+ int max_uV)
+{
+ /*
+ * Check if supported first to avoid errors since we may try several
+ * signal levels during power up and don't want to show errors.
+ */
+ if (!regulator_is_supported_voltage(regulator, min_uV, max_uV))
+ return -EINVAL;
+
+ return regulator_set_voltage_triplet(regulator, min_uV, target_uV,
+ max_uV);
+}
+
+/**
+ * mmc_regulator_set_vqmmc - Set VQMMC as per the ios
+ *
+ * For 3.3V signaling, we try to match VQMMC to VMMC as closely as possible.
+ * That will match the behavior of old boards where VQMMC and VMMC were supplied
+ * by the same supply. The Bus Operating conditions for 3.3V signaling in the
+ * SD card spec also define VQMMC in terms of VMMC.
+ * If this is not possible we'll try the full 2.7-3.6V of the spec.
+ *
+ * For 1.2V and 1.8V signaling we'll try to get as close as possible to the
+ * requested voltage. This is definitely a good idea for UHS where there's a
+ * separate regulator on the card that's trying to make 1.8V and it's best if
+ * we match.
+ *
+ * This function is expected to be used by a controller's
+ * start_signal_voltage_switch() function.
+ */
+int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct device *dev = mmc_dev(mmc);
+ int ret, volt, min_uV, max_uV;
+
+ /* If no vqmmc supply then we can't change the voltage */
+ if (IS_ERR(mmc->supply.vqmmc))
+ return -EINVAL;
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_120:
+ return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+ 1100000, 1200000, 1300000);
+ case MMC_SIGNAL_VOLTAGE_180:
+ return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+ 1700000, 1800000, 1950000);
+ case MMC_SIGNAL_VOLTAGE_330:
+ ret = mmc_ocrbitnum_to_vdd(mmc->ios.vdd, &volt, &max_uV);
+ if (ret < 0)
+ return ret;
+
+ dev_dbg(dev, "%s: found vmmc voltage range of %d-%duV\n",
+ __func__, volt, max_uV);
+
+ min_uV = max(volt - 300000, 2700000);
+ max_uV = min(max_uV + 200000, 3600000);
+
+ /*
+ * Due to a limitation in the current implementation of
+ * regulator_set_voltage_triplet() which is taking the lowest
+ * voltage possible if below the target, search for a suitable
+ * voltage in two steps and try to stay close to vmmc
+ * with a 0.3V tolerance at first.
+ */
+ if (!mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+ min_uV, volt, max_uV))
+ return 0;
+
+ return mmc_regulator_set_voltage_if_supported(mmc->supply.vqmmc,
+ 2700000, volt, 3600000);
+ default:
+ return -EINVAL;
+ }
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc);
+
+#else
+
+static inline int mmc_regulator_get_ocrmask(struct regulator *supply)
+{
+ return 0;
+}
+
+#endif /* CONFIG_REGULATOR */
+
+/**
+ * mmc_regulator_get_supply - try to get VMMC and VQMMC regulators for a host
+ * @mmc: the host to regulate
+ *
+ * Returns 0 or errno. errno should be handled, it is either a critical error
+ * or -EPROBE_DEFER. 0 means no critical error but it does not mean all
+ * regulators have been found because they all are optional. If you require
+ * certain regulators, you need to check separately in your driver if they got
+ * populated after calling this function.
+ */
+int mmc_regulator_get_supply(struct mmc_host *mmc)
+{
+ struct device *dev = mmc_dev(mmc);
+ int ret;
+
+ mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc");
+ mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc");
+
+ if (IS_ERR(mmc->supply.vmmc)) {
+ if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_dbg(dev, "No vmmc regulator found\n");
+ } else {
+ ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
+ if (ret > 0)
+ mmc->ocr_avail = ret;
+ else
+ dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
+ }
+
+ if (IS_ERR(mmc->supply.vqmmc)) {
+ if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_dbg(dev, "No vqmmc regulator found\n");
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mmc_regulator_get_supply);
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index d893902b2f1c..7f93747c8cdc 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -532,7 +532,6 @@ static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc,
}
#endif
-u32 mmc_vddrange_to_ocrmask(int vdd_min, int vdd_max);
int mmc_regulator_get_supply(struct mmc_host *mmc);
static inline int mmc_card_is_removable(struct mmc_host *host)