diff options
| -rw-r--r-- | drivers/acpi/pci_mcfg.c | 22 | ||||
| -rw-r--r-- | drivers/pci/Kconfig | 62 | ||||
| -rw-r--r-- | drivers/pci/ecam.c | 10 | ||||
| -rw-r--r-- | drivers/pci/pci-sysfs.c | 1 | ||||
| -rw-r--r-- | drivers/pci/pci.c | 12 | ||||
| -rw-r--r-- | include/linux/pci-ecam.h | 1 |
6 files changed, 107 insertions, 1 deletions
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index 54b36b7ad47d..7ddd57abadd1 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -142,6 +142,26 @@ static struct mcfg_fixup mcfg_quirks[] = { XGENE_V2_ECAM_MCFG(4, 0), XGENE_V2_ECAM_MCFG(4, 1), XGENE_V2_ECAM_MCFG(4, 2), + +#define ALTRA_ECAM_QUIRK(rev, seg) \ + { "Ampere", "Altra ", rev, seg, MCFG_BUS_ANY, &pci_32b_read_ops } + + ALTRA_ECAM_QUIRK(1, 0), + ALTRA_ECAM_QUIRK(1, 1), + ALTRA_ECAM_QUIRK(1, 2), + ALTRA_ECAM_QUIRK(1, 3), + ALTRA_ECAM_QUIRK(1, 4), + ALTRA_ECAM_QUIRK(1, 5), + ALTRA_ECAM_QUIRK(1, 6), + ALTRA_ECAM_QUIRK(1, 7), + ALTRA_ECAM_QUIRK(1, 8), + ALTRA_ECAM_QUIRK(1, 9), + ALTRA_ECAM_QUIRK(1, 10), + ALTRA_ECAM_QUIRK(1, 11), + ALTRA_ECAM_QUIRK(1, 12), + ALTRA_ECAM_QUIRK(1, 13), + ALTRA_ECAM_QUIRK(1, 14), + ALTRA_ECAM_QUIRK(1, 15), }; static char mcfg_oem_id[ACPI_OEM_ID_SIZE]; @@ -280,5 +300,5 @@ void __init pci_mmcfg_late_init(void) { int err = acpi_table_parse(ACPI_SIG_MCFG, pci_mcfg_parse); if (err) - pr_err("Failed to parse MCFG (%d)\n", err); + pr_debug("Failed to parse MCFG (%d)\n", err); } diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 4bef5c2bae9f..d323b25ae27e 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -187,6 +187,68 @@ config PCI_HYPERV The PCI device frontend driver allows the kernel to import arbitrary PCI devices from a PCI backend to support PCI driver domains. +choice + prompt "PCI Express hierarchy optimization setting" + default PCIE_BUS_DEFAULT + depends on PCI && EXPERT + help + MPS (Max Payload Size) and MRRS (Max Read Request Size) are PCIe + device parameters that affect performance and the ability to + support hotplug and peer-to-peer DMA. + + The following choices set the MPS and MRRS optimization strategy + at compile-time. The choices are the same as those offered for + the kernel command-line parameter 'pci', i.e., + 'pci=pcie_bus_tune_off', 'pci=pcie_bus_safe', + 'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'. + + This is a compile-time setting and can be overridden by the above + command-line parameters. If unsure, choose PCIE_BUS_DEFAULT. + +config PCIE_BUS_TUNE_OFF + bool "Tune Off" + depends on PCI + help + Use the BIOS defaults; don't touch MPS at all. This is the same + as booting with 'pci=pcie_bus_tune_off'. + +config PCIE_BUS_DEFAULT + bool "Default" + depends on PCI + help + Default choice; ensure that the MPS matches upstream bridge. + +config PCIE_BUS_SAFE + bool "Safe" + depends on PCI + help + Use largest MPS that boot-time devices support. If you have a + closed system with no possibility of adding new devices, this + will use the largest MPS that's supported by all devices. This + is the same as booting with 'pci=pcie_bus_safe'. + +config PCIE_BUS_PERFORMANCE + bool "Performance" + depends on PCI + help + Use MPS and MRRS for best performance. Ensure that a given + device's MPS is no larger than its parent MPS, which allows us to + keep all switches/bridges to the max MPS supported by their + parent. This is the same as booting with 'pci=pcie_bus_perf'. + +config PCIE_BUS_PEER2PEER + bool "Peer2peer" + depends on PCI + help + Set MPS = 128 for all devices. MPS configuration effected by the + other options could cause the MPS on one root port to be + different than that of the MPS on another, which may cause + hot-added devices or peer-to-peer DMA to fail. Set MPS to the + smallest possible value (128B) system-wide to avoid these issues. + This is the same as booting with 'pci=pcie_bus_peer2peer'. + +endchoice + source "drivers/pci/hotplug/Kconfig" source "drivers/pci/controller/Kconfig" source "drivers/pci/endpoint/Kconfig" diff --git a/drivers/pci/ecam.c b/drivers/pci/ecam.c index 8f065a42fc1a..b54d32a31669 100644 --- a/drivers/pci/ecam.c +++ b/drivers/pci/ecam.c @@ -168,4 +168,14 @@ const struct pci_ecam_ops pci_32b_ops = { .write = pci_generic_config_write32, } }; + +/* ECAM ops for 32-bit read only (non-compliant) */ +const struct pci_ecam_ops pci_32b_read_ops = { + .bus_shift = 20, + .pci_ops = { + .map_bus = pci_ecam_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write, + } +}; #endif diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6d78df981d41..3b9f63d3cad6 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -708,6 +708,7 @@ static ssize_t pci_read_config(struct file *filp, struct kobject *kobj, data[off - init_off + 3] = (val >> 24) & 0xff; off += 4; size -= 4; + cond_resched(); } if (size >= 2) { diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 8b649b01aad3..f3f64016fe32 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -101,7 +101,19 @@ unsigned long pci_hotplug_mmio_pref_size = DEFAULT_HOTPLUG_MMIO_PREF_SIZE; #define DEFAULT_HOTPLUG_BUS_SIZE 1 unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; + +/* PCIe MPS/MRRS strategy; can be overridden by kernel command-line param */ +#ifdef CONFIG_PCIE_BUS_TUNE_OFF +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; +#elif defined CONFIG_PCIE_BUS_SAFE +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE; +#elif defined CONFIG_PCIE_BUS_PERFORMANCE +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PERFORMANCE; +#elif defined CONFIG_PCIE_BUS_PEER2PEER +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PEER2PEER; +#else enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT; +#endif /* * The default CLS is used if arch didn't set CLS explicitly and not diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h index 1af5cb02ef7f..033ce74f02e8 100644 --- a/include/linux/pci-ecam.h +++ b/include/linux/pci-ecam.h @@ -51,6 +51,7 @@ extern const struct pci_ecam_ops pci_generic_ecam_ops; #if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS) extern const struct pci_ecam_ops pci_32b_ops; /* 32-bit accesses only */ +extern const struct pci_ecam_ops pci_32b_read_ops; /* 32-bit read only */ extern const struct pci_ecam_ops hisi_pcie_ops; /* HiSilicon */ extern const struct pci_ecam_ops thunder_pem_ecam_ops; /* Cavium ThunderX 1.x & 2.x */ extern const struct pci_ecam_ops pci_thunder_ecam_ops; /* Cavium ThunderX 1.x */ |