summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/m68k/coldfire/head.S2
-rw-r--r--arch/m68k/coldfire/m5272.c2
-rw-r--r--arch/m68k/coldfire/pci.c2
-rw-r--r--arch/m68k/ifpsp060/src/fpsp.S8
-rw-r--r--arch/m68k/ifpsp060/src/pfpsp.S4
-rw-r--r--arch/m68k/include/asm/dma.h2
-rw-r--r--arch/m68k/include/asm/m525xsim.h4
-rw-r--r--arch/m68k/include/asm/mcfmmu.h2
-rw-r--r--arch/m68k/include/asm/q40_master.h2
-rw-r--r--arch/m68k/mac/iop.c2
-rw-r--r--arch/m68k/math-emu/fp_decode.h2
11 files changed, 16 insertions, 16 deletions
diff --git a/arch/m68k/coldfire/head.S b/arch/m68k/coldfire/head.S
index fa31be297b85..73d92ea0ce65 100644
--- a/arch/m68k/coldfire/head.S
+++ b/arch/m68k/coldfire/head.S
@@ -288,7 +288,7 @@ _clear_bss:
#endif
/*
- * Assember start up done, start code proper.
+ * Assembler start up done, start code proper.
*/
jsr start_kernel /* start Linux kernel */
diff --git a/arch/m68k/coldfire/m5272.c b/arch/m68k/coldfire/m5272.c
index c525e4c08f84..9abb1a441da0 100644
--- a/arch/m68k/coldfire/m5272.c
+++ b/arch/m68k/coldfire/m5272.c
@@ -111,7 +111,7 @@ void __init config_BSP(char *commandp, int size)
/***************************************************************************/
/*
- * Some 5272 based boards have the FEC ethernet diectly connected to
+ * Some 5272 based boards have the FEC ethernet directly connected to
* an ethernet switch. In this case we need to use the fixed phy type,
* and we need to declare it early in boot.
*/
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
index 821de928dc3f..6a640be48568 100644
--- a/arch/m68k/coldfire/pci.c
+++ b/arch/m68k/coldfire/pci.c
@@ -42,7 +42,7 @@ static unsigned long iospace;
/*
* We need to be carefull probing on bus 0 (directly connected to host
- * bridge). We should only acccess the well defined possible devices in
+ * bridge). We should only access the well defined possible devices in
* use, ignore aliases and the like.
*/
static unsigned char mcf_host_slot2sid[32] = {
diff --git a/arch/m68k/ifpsp060/src/fpsp.S b/arch/m68k/ifpsp060/src/fpsp.S
index 78cb60f5bb4d..9bbffebe3eb5 100644
--- a/arch/m68k/ifpsp060/src/fpsp.S
+++ b/arch/m68k/ifpsp060/src/fpsp.S
@@ -10191,7 +10191,7 @@ xdnrm_con:
xdnrm_sd:
mov.l %a1,-(%sp)
tst.b LOCAL_EX(%a0) # is denorm pos or neg?
- smi.b %d1 # set d0 accodingly
+ smi.b %d1 # set d0 accordingly
bsr.l unf_sub
mov.l (%sp)+,%a1
xdnrm_exit:
@@ -10990,7 +10990,7 @@ src_qnan_m:
# routines where an instruction is selected by an index into
# a large jump table corresponding to a given instruction which
# has been decoded. Flow continues here where we now decode
-# further accoding to the source operand type.
+# further according to the source operand type.
#
global fsinh
@@ -23196,14 +23196,14 @@ m_sign:
#
# 1. Branch on the sign of the adjusted exponent.
# 2p.(positive exp)
-# 2. Check M16 and the digits in lwords 2 and 3 in decending order.
+# 2. Check M16 and the digits in lwords 2 and 3 in descending order.
# 3. Add one for each zero encountered until a non-zero digit.
# 4. Subtract the count from the exp.
# 5. Check if the exp has crossed zero in #3 above; make the exp abs
# and set SE.
# 6. Multiply the mantissa by 10**count.
# 2n.(negative exp)
-# 2. Check the digits in lwords 3 and 2 in decending order.
+# 2. Check the digits in lwords 3 and 2 in descending order.
# 3. Add one for each zero encountered until a non-zero digit.
# 4. Add the count to the exp.
# 5. Check if the exp has crossed zero in #3 above; clear SE.
diff --git a/arch/m68k/ifpsp060/src/pfpsp.S b/arch/m68k/ifpsp060/src/pfpsp.S
index 4aedef973cf6..3535e6c87eec 100644
--- a/arch/m68k/ifpsp060/src/pfpsp.S
+++ b/arch/m68k/ifpsp060/src/pfpsp.S
@@ -13156,14 +13156,14 @@ m_sign:
#
# 1. Branch on the sign of the adjusted exponent.
# 2p.(positive exp)
-# 2. Check M16 and the digits in lwords 2 and 3 in decending order.
+# 2. Check M16 and the digits in lwords 2 and 3 in descending order.
# 3. Add one for each zero encountered until a non-zero digit.
# 4. Subtract the count from the exp.
# 5. Check if the exp has crossed zero in #3 above; make the exp abs
# and set SE.
# 6. Multiply the mantissa by 10**count.
# 2n.(negative exp)
-# 2. Check the digits in lwords 3 and 2 in decending order.
+# 2. Check the digits in lwords 3 and 2 in descending order.
# 3. Add one for each zero encountered until a non-zero digit.
# 4. Add the count to the exp.
# 5. Check if the exp has crossed zero in #3 above; clear SE.
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index 429fe26e320c..208b4daa14b3 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -18,7 +18,7 @@
* AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
* Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
*
- * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ * AUG/25/2000 : added support for 8, 16 and 32-bit Single-Address-Mode (K)2000
* Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
*
* APR/18/2002 : added proper support for MCF5272 DMA controller.
diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
index f186459072e9..699f20c8a0fe 100644
--- a/arch/m68k/include/asm/m525xsim.h
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -123,10 +123,10 @@
/*
* I2C module.
*/
-#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base addreess I2C0 */
+#define MCFI2C_BASE0 (MCF_MBAR + 0x280) /* Base address I2C0 */
#define MCFI2C_SIZE0 0x20 /* Register set size */
-#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base addreess I2C1 */
+#define MCFI2C_BASE1 (MCF_MBAR2 + 0x440) /* Base address I2C1 */
#define MCFI2C_SIZE1 0x20 /* Register set size */
/*
diff --git a/arch/m68k/include/asm/mcfmmu.h b/arch/m68k/include/asm/mcfmmu.h
index 26cc3d5a63f8..8824236e303f 100644
--- a/arch/m68k/include/asm/mcfmmu.h
+++ b/arch/m68k/include/asm/mcfmmu.h
@@ -38,7 +38,7 @@
/*
* MMU Operation register.
*/
-#define MMUOR_UAA 0x00000001 /* Update allocatiom address */
+#define MMUOR_UAA 0x00000001 /* Update allocation address */
#define MMUOR_ACC 0x00000002 /* TLB access */
#define MMUOR_RD 0x00000004 /* TLB access read */
#define MMUOR_WR 0x00000000 /* TLB access write */
diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h
index fc5b36278d04..c48d21b68f04 100644
--- a/arch/m68k/include/asm/q40_master.h
+++ b/arch/m68k/include/asm/q40_master.h
@@ -1,6 +1,6 @@
/*
* Q40 master Chip Control
- * RTC stuff merged for compactnes..
+ * RTC stuff merged for compactness.
*/
#ifndef _Q40_MASTER_H
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index 4d2adfb32a2a..7990b6f50105 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -60,7 +60,7 @@
*
* The host talks to the IOPs using a rather simple message-passing scheme via
* a shared memory area in the IOP RAM. Each IOP has seven "channels"; each
- * channel is conneced to a specific software driver on the IOP. For example
+ * channel is connected to a specific software driver on the IOP. For example
* on the SCC IOP there is one channel for each serial port. Each channel has
* an incoming and and outgoing message queue with a depth of one.
*
diff --git a/arch/m68k/math-emu/fp_decode.h b/arch/m68k/math-emu/fp_decode.h
index 759679d9ab96..6d1e760e2a0e 100644
--- a/arch/m68k/math-emu/fp_decode.h
+++ b/arch/m68k/math-emu/fp_decode.h
@@ -130,7 +130,7 @@ do_fscc=0
bfextu %d2{#13,#3},%d0
.endm
-| decode the 8bit diplacement from the brief extension word
+| decode the 8bit displacement from the brief extension word
.macro fp_decode_disp8
move.b %d2,%d0
ext.w %d0