summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/arm/altera/socfpga-system.txt12
-rw-r--r--Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt2
-rw-r--r--Documentation/devicetree/bindings/input/max77650-onkey.txt26
-rw-r--r--Documentation/devicetree/bindings/leds/leds-max77650.txt57
-rw-r--r--Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt1
-rw-r--r--Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt17
-rw-r--r--Documentation/devicetree/bindings/mfd/max77620.txt9
-rw-r--r--Documentation/devicetree/bindings/mfd/max77650.txt46
-rw-r--r--Documentation/devicetree/bindings/mfd/stmfx.txt28
-rw-r--r--Documentation/devicetree/bindings/mfd/ti-lmu.txt4
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt116
-rw-r--r--Documentation/devicetree/bindings/power/supply/max77650-charger.txt28
-rw-r--r--MAINTAINERS20
-rw-r--r--arch/arm/configs/socfpga_defconfig1
-rw-r--r--arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi2
-rw-r--r--arch/arm64/configs/defconfig1
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-max77650.c190
-rw-r--r--drivers/input/misc/Kconfig9
-rw-r--r--drivers/input/misc/Makefile1
-rw-r--r--drivers/input/misc/max77650-onkey.c121
-rw-r--r--drivers/leds/Kconfig6
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-max77650.c147
-rw-r--r--drivers/mfd/Kconfig99
-rw-r--r--drivers/mfd/Makefile4
-rw-r--r--drivers/mfd/ab8500-debugfs.c2
-rw-r--r--drivers/mfd/altera-sysmgr.c211
-rw-r--r--drivers/mfd/atmel-hlcdc.c1
-rw-r--r--drivers/mfd/axp20x-i2c.c2
-rw-r--r--drivers/mfd/axp20x.c16
-rw-r--r--drivers/mfd/cros_ec.c39
-rw-r--r--drivers/mfd/cros_ec_dev.c36
-rw-r--r--drivers/mfd/cs47l35-tables.c2
-rw-r--r--drivers/mfd/cs47l90-tables.c2
-rw-r--r--drivers/mfd/da9063-core.c28
-rw-r--r--drivers/mfd/da9063-i2c.c10
-rw-r--r--drivers/mfd/da9063-irq.c10
-rw-r--r--drivers/mfd/intel-lpss-pci.c13
-rw-r--r--drivers/mfd/intel-lpss.c3
-rw-r--r--drivers/mfd/intel_quark_i2c_gpio.c10
-rw-r--r--drivers/mfd/intel_soc_pmic_chtwc.c1
-rw-r--r--drivers/mfd/max77620.c87
-rw-r--r--drivers/mfd/max77650.c232
-rw-r--r--drivers/mfd/mfd-core.c13
-rw-r--r--drivers/mfd/rk808.c9
-rw-r--r--drivers/mfd/sec-core.c59
-rw-r--r--drivers/mfd/sec-irq.c3
-rw-r--r--drivers/mfd/ssbi.c6
-rw-r--r--drivers/mfd/stmfx.c545
-rw-r--r--drivers/mfd/sun6i-prcm.c3
-rw-r--r--drivers/mfd/syscon.c19
-rw-r--r--drivers/mfd/t7l66xb.c12
-rw-r--r--drivers/mfd/tc6387xb.c12
-rw-r--r--drivers/mfd/tc6393xb.c23
-rw-r--r--drivers/mfd/tps65912-spi.c1
-rw-r--r--drivers/mfd/twl6040.c13
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c5
-rw-r--r--drivers/pinctrl/Kconfig14
-rw-r--r--drivers/pinctrl/Makefile1
-rw-r--r--drivers/pinctrl/pinctrl-stmfx.c819
-rw-r--r--drivers/platform/chrome/cros_ec_proto.c6
-rw-r--r--drivers/power/supply/Kconfig7
-rw-r--r--drivers/power/supply/Makefile1
-rw-r--r--drivers/power/supply/max77650-charger.c368
-rw-r--r--include/linux/mfd/altera-sysmgr.h29
-rw-r--r--include/linux/mfd/cros_ec.h5
-rw-r--r--include/linux/mfd/cros_ec_commands.h91
-rw-r--r--include/linux/mfd/da9063/core.h7
-rw-r--r--include/linux/mfd/da9063/registers.h13
-rw-r--r--include/linux/mfd/max77620.h5
-rw-r--r--include/linux/mfd/max77650.h59
-rw-r--r--include/linux/mfd/stmfx.h123
-rw-r--r--include/linux/mfd/syscon/atmel-matrix.h6
-rw-r--r--include/linux/mfd/syscon/atmel-mc.h6
-rw-r--r--include/linux/mfd/syscon/atmel-smc.h5
-rw-r--r--include/linux/mfd/syscon/atmel-st.h6
-rw-r--r--include/linux/mfd/syscon/imx6q-iomuxc-gpr.h9
79 files changed, 3745 insertions, 219 deletions
diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
index f4d04a067282..82edbaaa3f85 100644
--- a/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-system.txt
@@ -11,3 +11,15 @@ Example:
reg = <0xffd08000 0x1000>;
cpu1-start-addr = <0xffd080c4>;
};
+
+ARM64 - Stratix10
+Required properties:
+- compatible : "altr,sys-mgr-s10"
+- reg : Should contain 1 register range(address and length)
+ for system manager register.
+
+Example:
+ sysmgr@ffd12000 {
+ compatible = "altr,sys-mgr-s10";
+ reg = <0xffd12000 0x228>;
+ };
diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt b/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt
index 99980aee26e5..c92d411fd023 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32-syscon.txt
@@ -5,10 +5,12 @@ Properties:
- " st,stm32mp157-syscfg " - for stm32mp157 based SoCs,
second value must be always "syscon".
- reg : offset and length of the register set.
+ - clocks: phandle to the syscfg clock
Example:
syscfg: syscon@50020000 {
compatible = "st,stm32mp157-syscfg", "syscon";
reg = <0x50020000 0x400>;
+ clocks = <&rcc SYSCFG>;
};
diff --git a/Documentation/devicetree/bindings/input/max77650-onkey.txt b/Documentation/devicetree/bindings/input/max77650-onkey.txt
new file mode 100644
index 000000000000..477dc74f452a
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/max77650-onkey.txt
@@ -0,0 +1,26 @@
+Onkey driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The onkey controller is represented as a sub-node of the PMIC node on
+the device tree.
+
+Required properties:
+--------------------
+- compatible: Must be "maxim,max77650-onkey".
+
+Optional properties:
+- linux,code: The key-code to be reported when the key is pressed.
+ Defaults to KEY_POWER.
+- maxim,onkey-slide: The system's button is a slide switch, not the default
+ push button.
+
+Example:
+--------
+
+ onkey {
+ compatible = "maxim,max77650-onkey";
+ linux,code = <KEY_END>;
+ maxim,onkey-slide;
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.txt b/Documentation/devicetree/bindings/leds/leds-max77650.txt
new file mode 100644
index 000000000000..3a67115cc1da
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.txt
@@ -0,0 +1,57 @@
+LED driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The LED controller is represented as a sub-node of the PMIC node on
+the device tree.
+
+This device has three current sinks.
+
+Required properties:
+--------------------
+- compatible: Must be "maxim,max77650-led"
+- #address-cells: Must be <1>.
+- #size-cells: Must be <0>.
+
+Each LED is represented as a sub-node of the LED-controller node. Up to
+three sub-nodes can be defined.
+
+Required properties of the sub-node:
+------------------------------------
+
+- reg: Must be <0>, <1> or <2>.
+
+Optional properties of the sub-node:
+------------------------------------
+
+- label: See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: See Documentation/devicetree/bindings/leds/common.txt
+
+For more details, please refer to the generic GPIO DT binding document
+<devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+ leds {
+ compatible = "maxim,max77650-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "blue:usr0";
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "red:usr1";
+ linux,default-trigger = "heartbeat";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:usr2";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
index 3f643ef121ff..5f8880cc757e 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt
@@ -7,6 +7,7 @@ Required properties:
"atmel,sama5d2-hlcdc"
"atmel,sama5d3-hlcdc"
"atmel,sama5d4-hlcdc"
+ "microchip,sam9x60-hlcdc"
- reg: base address and size of the HLCDC device registers.
- clock-names: the name of the 3 clocks requested by the HLCDC device.
Should contain "periph_clk", "sys_clk" and "slow_clk".
diff --git a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
index 004b0158cf4d..3bf92ad37fa1 100644
--- a/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+++ b/Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
@@ -19,6 +19,8 @@ And these documents for the required sub-node binding details:
[4] Clock: ../clock/cirrus,lochnagar.txt
[5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
[6] Regulator: ../regulator/cirrus,lochnagar.txt
+ [7] Sound: ../sound/cirrus,lochnagar.txt
+ [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
Required properties:
@@ -41,6 +43,11 @@ Optional sub-nodes:
- Bindings for the regulator components, see [6]. Only available on
Lochnagar 2.
+ - lochnagar-sc : Binding for the sound card components, see [7].
+ Only available on Lochnagar 2.
+ - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
+ Only available on Lochnagar 2.
+
Optional properties:
- present-gpios : Host present line, indicating the presence of a
@@ -65,4 +72,14 @@ lochnagar: lochnagar@22 {
compatible = "cirrus,lochnagar-pinctrl";
...
};
+
+ lochnagar-sc {
+ compatible = "cirrus,lochnagar2-soundcard";
+ ...
+ };
+
+ lochnagar-hwmon {
+ compatible = "cirrus,lochnagar2-hwmon";
+ ...
+ };
};
diff --git a/Documentation/devicetree/bindings/mfd/max77620.txt b/Documentation/devicetree/bindings/mfd/max77620.txt
index 9c16d51cc15b..5a642a51d58e 100644
--- a/Documentation/devicetree/bindings/mfd/max77620.txt
+++ b/Documentation/devicetree/bindings/mfd/max77620.txt
@@ -4,7 +4,8 @@ Required properties:
-------------------
- compatible: Must be one of
"maxim,max77620"
- "maxim,max20024".
+ "maxim,max20024"
+ "maxim,max77663"
- reg: I2C device address.
Optional properties:
@@ -17,6 +18,11 @@ Optional properties:
IRQ numbers for different interrupt source of MAX77620
are defined at dt-bindings/mfd/max77620.h.
+- system-power-controller: Indicates that this PMIC is controlling the
+ system power, see [1] for more details.
+
+[1] Documentation/devicetree/bindings/power/power-controller.txt
+
Optional subnodes and their properties:
=======================================
@@ -105,6 +111,7 @@ Optional properties:
Here supported time periods by device in microseconds are as follows:
MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds.
MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
+MAX77663 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds.
-maxim,power-ok-control: configure map power ok bit
1: Enables POK(Power OK) to control nRST_IO and GPIO1
diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
new file mode 100644
index 000000000000..b529d8d19335
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77650.txt
@@ -0,0 +1,46 @@
+MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+Required properties:
+-------------------
+- compatible: Must be "maxim,max77650"
+- reg: I2C device address.
+- interrupts: The interrupt on the parent the controller is
+ connected to.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Must be <2>.
+
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Must be <2>. The first cell is the pin number and
+ the second cell is used to specify the gpio active
+ state.
+
+Optional properties:
+--------------------
+gpio-line-names: Single string containing the name of the GPIO line.
+
+The GPIO-controller module is represented as part of the top-level PMIC
+node. The device exposes a single GPIO line.
+
+For device-tree bindings of other sub-modules (regulator, power supply,
+LEDs and onkey) refer to the binding documents under the respective
+sub-system directories.
+
+For more details on GPIO bindings, please refer to the generic GPIO DT
+binding document <devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+ pmic@48 {
+ compatible = "maxim,max77650";
+ reg = <0x48>;
+
+ interrupt-controller;
+ interrupt-parent = <&gpio2>;
+ #interrupt-cells = <2>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "max77650-charger";
+ };
diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt
new file mode 100644
index 000000000000..f0c2f7fcf5c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/stmfx.txt
@@ -0,0 +1,28 @@
+STMicroelectonics Multi-Function eXpander (STMFX) Core bindings
+
+ST Multi-Function eXpander (STMFX) is a slave controller using I2C for
+communication with the main MCU. Its main features are GPIO expansion, main
+MCU IDD measurement (IDD is the amount of current that flows through VDD) and
+resistive touchscreen controller.
+
+Required properties:
+- compatible: should be "st,stmfx-0300".
+- reg: I2C slave address of the device.
+- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal.
+ Please refer to ../interrupt-controller/interrupt.txt
+
+Optional properties:
+- drive-open-drain: configure MFX_IRQ_OUT as open drain.
+- vdd-supply: phandle of the regulator supplying STMFX.
+
+Example:
+
+ stmfx: stmfx@42 {
+ compatible = "st,stmfx-0300";
+ reg = <0x42>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpioi>;
+ vdd-supply = <&v3v3>;
+ };
+
+Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings.
diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
index 980394d701a7..86ca786d54fc 100644
--- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -104,8 +104,8 @@ lm3632@11 {
regulators {
compatible = "ti,lm363x-regulator";
- ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>; /* PC0 */
- ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>; /* PC1 */
+ enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+ <&pioC 1 GPIO_ACTIVE_HIGH>;
vboost {
regulator-name = "lcd_boost";
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
new file mode 100644
index 000000000000..c1b4c1819b84
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt
@@ -0,0 +1,116 @@
+STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings
+
+ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion.
+Please refer to ../mfd/stmfx.txt for STMFX Core bindings.
+
+Required properties:
+- compatible: should be "st,stmfx-0300-pinctrl".
+- #gpio-cells: should be <2>, the first cell is the GPIO number and the second
+ cell is the gpio flags in accordance with <dt-bindings/gpio/gpio.h>.
+- gpio-controller: marks the device as a GPIO controller.
+- #interrupt-cells: should be <2>, the first cell is the GPIO number and the
+ second cell is the interrupt flags in accordance with
+ <dt-bindings/interrupt-controller/irq.h>.
+- interrupt-controller: marks the device as an interrupt controller.
+- gpio-ranges: specifies the mapping between gpio controller and pin
+ controller pins. Check "Concerning gpio-ranges property" below.
+Please refer to ../gpio/gpio.txt.
+
+Please refer to pinctrl-bindings.txt for pin configuration.
+
+Required properties for pin configuration sub-nodes:
+- pins: list of pins to which the configuration applies.
+
+Optional properties for pin configuration sub-nodes (pinconf-generic ones):
+- bias-disable: disable any bias on the pin.
+- bias-pull-up: the pin will be pulled up.
+- bias-pull-pin-default: use the pin-default pull state.
+- bias-pull-down: the pin will be pulled down.
+- drive-open-drain: the pin will be driven with open drain.
+- drive-push-pull: the pin will be driven actively high and low.
+- output-high: the pin will be configured as an output driving high level.
+- output-low: the pin will be configured as an output driving low level.
+
+Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are
+called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2".
+
+Concerning gpio-ranges property:
+- if all STMFX pins[24:0] are available (no other STMFX function in use), you
+ should use gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+- if agpio[3:0] are not available (STMFX Touchscreen function in use), you
+ should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>;
+- if agpio[7:4] are not available (STMFX IDD function in use), you
+ should use gpio-ranges = <&stmfx_pinctrl 0 0 20>;
+
+
+Example:
+
+ stmfx: stmfx@42 {
+ ...
+
+ stmfx_pinctrl: stmfx-pin-controller {
+ compatible = "st,stmfx-0300-pinctrl";
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ gpio-ranges = <&stmfx_pinctrl 0 0 24>;
+
+ joystick_pins: joystick {
+ pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+ };
+
+Example of STMFX GPIO consumers:
+
+ joystick {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&joystick_pins>;
+ pinctrl-names = "default";
+ button-0 {
+ label = "JoySel";
+ linux,code = <KEY_ENTER>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-1 {
+ label = "JoyDown";
+ linux,code = <KEY_DOWN>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-2 {
+ label = "JoyLeft";
+ linux,code = <KEY_LEFT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-3 {
+ label = "JoyRight";
+ linux,code = <KEY_RIGHT>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ };
+ button-4 {
+ label = "JoyUp";
+ linux,code = <KEY_UP>;
+ interrupt-parent = <&stmfx_pinctrl>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ orange {
+ gpios = <&stmfx_pinctrl 17 1>;
+ };
+
+ blue {
+ gpios = <&stmfx_pinctrl 19 1>;
+ };
+ }
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.txt b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
new file mode 100644
index 000000000000..e6d0fb6ff94e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.txt
@@ -0,0 +1,28 @@
+Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+This module is part of the MAX77650 MFD device. For more details
+see Documentation/devicetree/bindings/mfd/max77650.txt.
+
+The charger is represented as a sub-node of the PMIC node on the device tree.
+
+Required properties:
+--------------------
+- compatible: Must be "maxim,max77650-charger"
+
+Optional properties:
+--------------------
+- input-voltage-min-microvolt: Minimum CHGIN regulation voltage. Must be one
+ of: 4000000, 4100000, 4200000, 4300000,
+ 4400000, 4500000, 4600000, 4700000.
+- input-current-limit-microamp: CHGIN input current limit (in microamps). Must
+ be one of: 95000, 190000, 285000, 380000,
+ 475000.
+
+Example:
+--------
+
+ charger {
+ compatible = "maxim,max77650-charger";
+ input-voltage-min-microvolt = <4200000>;
+ input-current-limit-microamp = <285000>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index a8b3eefc37a2..ce573aaa04df 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -710,6 +710,12 @@ L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/gpio/gpio-altera.c
+ALTERA SYSTEM MANAGER DRIVER
+M: Thor Thayer <thor.thayer@linux.intel.com>
+S: Maintained
+F: drivers/mfd/altera-sysmgr.c
+F: include/linux/mfd/altera-sysgmr.h
+
ALTERA SYSTEM RESOURCE DRIVER FOR ARRIA10 DEVKIT
M: Thor Thayer <thor.thayer@linux.intel.com>
S: Maintained
@@ -9517,6 +9523,20 @@ S: Maintained
F: Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.txt
F: drivers/iio/proximity/mb1232.c
+MAXIM MAX77650 PMIC MFD DRIVER
+M: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/*/*max77650.txt
+F: Documentation/devicetree/bindings/*/max77650*.txt
+F: include/linux/mfd/max77650.h
+F: drivers/mfd/max77650.c
+F: drivers/regulator/max77650-regulator.c
+F: drivers/power/supply/max77650-charger.c
+F: drivers/input/misc/max77650-onkey.c
+F: drivers/leds/leds-max77650.c
+F: drivers/gpio/gpio-max77650.c
+
MAXIM MAX77802 PMIC REGULATOR DEVICE DRIVER
M: Javier Martinez Canillas <javier@dowhile0.org>
L: linux-kernel@vger.kernel.org
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index 3b42e0d597bd..9d42cfe85f5b 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -106,6 +106,7 @@ CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
CONFIG_MFD_ALTERA_A10SR=y
+CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index a2cec6218211..fe107ce115ef 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -393,7 +393,7 @@
};
sysmgr: sysmgr@ffd12000 {
- compatible = "altr,sys-mgr", "syscon";
+ compatible = "altr,sys-mgr-s10","altr,sys-mgr";
reg = <0xffd12000 0x228>;
};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 9a8718bbf6ba..74f0a199166d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -432,6 +432,7 @@ CONFIG_MESON_WATCHDOG=m
CONFIG_RENESAS_WDT=y
CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_BCM2835_WDT=y
+CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X_I2C=y
CONFIG_MFD_AXP20X_RSB=y
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 9370276fe7fe..41f08362dad3 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1097,6 +1097,13 @@ config GPIO_MAX77620
driver also provides interrupt support for each of the gpios.
Say yes here to enable the max77620 to be used as gpio controller.
+config GPIO_MAX77650
+ tristate "Maxim MAX77650/77651 GPIO support"
+ depends on MFD_MAX77650
+ help
+ GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor.
+ These chips have a single pin that can be configured as GPIO.
+
config GPIO_MSIC
bool "Intel MSIC mixed signal gpio support"
depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index db8d854f9aea..e19be766f6a6 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -80,6 +80,7 @@ obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
obj-$(CONFIG_GPIO_MAX732X) += gpio-max732x.o
obj-$(CONFIG_GPIO_MAX77620) += gpio-max77620.o
+obj-$(CONFIG_GPIO_MAX77650) += gpio-max77650.o
obj-$(CONFIG_GPIO_MB86S7X) += gpio-mb86s7x.o
obj-$(CONFIG_GPIO_MENZ127) += gpio-menz127.o
obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o
diff --git a/drivers/gpio/gpio-max77650.c b/drivers/gpio/gpio-max77650.c
new file mode 100644
index 000000000000..3f03f4e8956c
--- /dev/null
+++ b/drivers/gpio/gpio-max77650.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// GPIO driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_GPIO_DIR_MASK BIT(0)
+#define MAX77650_GPIO_INVAL_MASK BIT(1)
+#define MAX77650_GPIO_DRV_MASK BIT(2)
+#define MAX77650_GPIO_OUTVAL_MASK BIT(3)
+#define MAX77650_GPIO_DEBOUNCE_MASK BIT(4)
+
+#define MAX77650_GPIO_DIR_OUT 0x00
+#define MAX77650_GPIO_DIR_IN BIT(0)
+#define MAX77650_GPIO_OUT_LOW 0x00
+#define MAX77650_GPIO_OUT_HIGH BIT(3)
+#define MAX77650_GPIO_DRV_OPEN_DRAIN 0x00
+#define MAX77650_GPIO_DRV_PUSH_PULL BIT(2)
+#define MAX77650_GPIO_DEBOUNCE BIT(4)
+
+#define MAX77650_GPIO_DIR_BITS(_reg) \
+ ((_reg) & MAX77650_GPIO_DIR_MASK)
+#define MAX77650_GPIO_INVAL_BITS(_reg) \
+ (((_reg) & MAX77650_GPIO_INVAL_MASK) >> 1)
+
+struct max77650_gpio_chip {
+ struct regmap *map;
+ struct gpio_chip gc;
+ int irq;
+};
+
+static int max77650_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+ return regmap_update_bits(chip->map,
+ MAX77650_REG_CNFG_GPIO,
+ MAX77650_GPIO_DIR_MASK,
+ MAX77650_GPIO_DIR_IN);
+}
+
+static int max77650_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+ int mask, regval;
+
+ mask = MAX77650_GPIO_DIR_MASK | MAX77650_GPIO_OUTVAL_MASK;
+ regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW;
+ regval |= MAX77650_GPIO_DIR_OUT;
+
+ return regmap_update_bits(chip->map,
+ MAX77650_REG_CNFG_GPIO, mask, regval);
+}
+
+static void max77650_gpio_set_value(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+ int rv, regval;
+
+ regval = value ? MAX77650_GPIO_OUT_HIGH : MAX77650_GPIO_OUT_LOW;
+
+ rv = regmap_update_bits(chip->map, MAX77650_REG_CNFG_GPIO,
+ MAX77650_GPIO_OUTVAL_MASK, regval);
+ if (rv)
+ dev_err(gc->parent, "cannot set GPIO value: %d\n", rv);
+}
+
+static int max77650_gpio_get_value(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+ unsigned int val;
+ int rv;
+
+ rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val);
+ if (rv)
+ return rv;
+
+ return MAX77650_GPIO_INVAL_BITS(val);
+}
+
+static int max77650_gpio_get_direction(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+ unsigned int val;
+ int rv;
+
+ rv = regmap_read(chip->map, MAX77650_REG_CNFG_GPIO, &val);
+ if (rv)
+ return rv;
+
+ return MAX77650_GPIO_DIR_BITS(val);
+}
+
+static int max77650_gpio_set_config(struct gpio_chip *gc,
+ unsigned int offset, unsigned long cfg)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+ switch (pinconf_to_config_param(cfg)) {
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ return regmap_update_bits(chip->map,
+ MAX77650_REG_CNFG_GPIO,
+ MAX77650_GPIO_DRV_MASK,
+ MAX77650_GPIO_DRV_OPEN_DRAIN);
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ return regmap_update_bits(chip->map,
+ MAX77650_REG_CNFG_GPIO,
+ MAX77650_GPIO_DRV_MASK,
+ MAX77650_GPIO_DRV_PUSH_PULL);
+ case PIN_CONFIG_INPUT_DEBOUNCE:
+ return regmap_update_bits(chip->map,
+ MAX77650_REG_CNFG_GPIO,
+ MAX77650_GPIO_DEBOUNCE_MASK,
+ MAX77650_GPIO_DEBOUNCE);
+ default:
+ return -ENOTSUPP;
+ }
+}
+
+static int max77650_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
+{
+ struct max77650_gpio_chip *chip = gpiochip_get_data(gc);
+
+ return chip->irq;
+}
+
+static int max77650_gpio_probe(struct platform_device *pdev)
+{
+ struct max77650_gpio_chip *chip;
+ struct device *dev, *parent;
+ struct i2c_client *i2c;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+ i2c = to_i2c_client(parent);
+
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->map = dev_get_regmap(parent, NULL);
+ if (!chip->map)
+ return -ENODEV;
+
+ chip->irq = platform_get_irq_byname(pdev, "GPI");
+ if (chip->irq < 0)
+ return chip->irq;
+
+ chip->gc.base = -1;
+ chip->gc.ngpio = 1;
+ chip->gc.label = i2c->name;
+ chip->gc.parent = dev;
+ chip->gc.owner = THIS_MODULE;
+ chip->gc.can_sleep = true;
+
+ chip->gc.direction_input = max77650_gpio_direction_input;
+ chip->gc.direction_output = max77650_gpio_direction_output;
+ chip->gc.set = max77650_gpio_set_value;
+ chip->gc.get = max77650_gpio_get_value;
+ chip->gc.get_direction = max77650_gpio_get_direction;
+ chip->gc.set_config = max77650_gpio_set_config;
+ chip->gc.to_irq = max77650_gpio_to_irq;
+
+ return devm_gpiochip_add_data(dev, &chip->gc, chip);
+}
+
+static struct platform_driver max77650_gpio_driver = {
+ .driver = {
+ .name = "max77650-gpio",
+ },
+ .probe = max77650_gpio_probe,
+};
+module_platform_driver(max77650_gpio_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 GPIO driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 6dfe9e2fe5b1..54d36f98b426 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -190,6 +190,15 @@ config INPUT_M68K_BEEP
tristate "M68k Beeper support"
depends on M68K
+config INPUT_MAX77650_ONKEY
+ tristate "Maxim MAX77650 ONKEY support"
+ depends on MFD_MAX77650
+ help
+ Support the ONKEY of the MAX77650 PMIC as an input device.
+
+ To compile this driver as a module, choose M here: the module
+ will be called max77650-onkey.
+
config INPUT_MAX77693_HAPTIC
tristate "MAXIM MAX77693/MAX77843 haptic controller support"
depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f38ebbdb05e2..8fd187f314bd 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o
obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o
obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o
+obj-$(CONFIG_INPUT_MAX77650_ONKEY) += max77650-onkey.o
obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o
obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o
obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o
diff --git a/drivers/input/misc/max77650-onkey.c b/drivers/input/misc/max77650-onkey.c
new file mode 100644
index 000000000000..fbf6caab7217
--- /dev/null
+++ b/drivers/input/misc/max77650-onkey.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// ONKEY driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_ONKEY_MODE_MASK BIT(3)
+#define MAX77650_ONKEY_MODE_PUSH 0x00
+#define MAX77650_ONKEY_MODE_SLIDE BIT(3)
+
+struct max77650_onkey {
+ struct input_dev *input;
+ unsigned int code;
+};
+
+static irqreturn_t max77650_onkey_falling(int irq, void *data)
+{
+ struct max77650_onkey *onkey = data;
+
+ input_report_key(onkey->input, onkey->code, 0);
+ input_sync(onkey->input);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max77650_onkey_rising(int irq, void *data)
+{
+ struct max77650_onkey *onkey = data;
+
+ input_report_key(onkey->input, onkey->code, 1);
+ input_sync(onkey->input);
+
+ return IRQ_HANDLED;
+}
+
+static int max77650_onkey_probe(struct platform_device *pdev)
+{
+ int irq_r, irq_f, error, mode;
+ struct max77650_onkey *onkey;
+ struct device *dev, *parent;
+ struct regmap *map;
+ unsigned int type;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+
+ map = dev_get_regmap(parent, NULL);
+ if (!map)
+ return -ENODEV;
+
+ onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey)
+ return -ENOMEM;
+
+ error = device_property_read_u32(dev, "linux,code", &onkey->code);
+ if (error)
+ onkey->code = KEY_POWER;
+
+ if (device_property_read_bool(dev, "maxim,onkey-slide")) {
+ mode = MAX77650_ONKEY_MODE_SLIDE;
+ type = EV_SW;
+ } else {
+ mode = MAX77650_ONKEY_MODE_PUSH;
+ type = EV_KEY;
+ }
+
+ error = regmap_update_bits(map, MAX77650_REG_CNFG_GLBL,
+ MAX77650_ONKEY_MODE_MASK, mode);
+ if (error)
+ return error;
+
+ irq_f = platform_get_irq_byname(pdev, "nEN_F");
+ if (irq_f < 0)
+ return irq_f;
+
+ irq_r = platform_get_irq_byname(pdev, "nEN_R");
+ if (irq_r < 0)
+ return irq_r;
+
+ onkey->input = devm_input_allocate_device(dev);
+ if (!onkey->input)
+ return -ENOMEM;
+
+ onkey->input->name = "max77650_onkey";
+ onkey->input->phys = "max77650_onkey/input0";
+ onkey->input->id.bustype = BUS_I2C;
+ input_set_capability(onkey->input, type, onkey->code);
+
+ error = devm_request_any_context_irq(dev, irq_f, max77650_onkey_falling,
+ IRQF_ONESHOT, "onkey-down", onkey);
+ if (error < 0)
+ return error;
+
+ error = devm_request_any_context_irq(dev, irq_r, max77650_onkey_rising,
+ IRQF_ONESHOT, "onkey-up", onkey);
+ if (error < 0)
+ return error;
+
+ return input_register_device(onkey->input);
+}
+
+static struct platform_driver max77650_onkey_driver = {
+ .driver = {
+ .name = "max77650-onkey",
+ },
+ .probe = max77650_onkey_probe,
+};
+module_platform_driver(max77650_onkey_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 ONKEY driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index f3000ccb8d35..71be87bdb926 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -619,6 +619,12 @@ config LEDS_TLC591XX
This option enables support for Texas Instruments TLC59108
and TLC59116 LED controllers.
+config LEDS_MAX77650
+ tristate "LED support for Maxim MAX77650 PMIC"
+ depends on LEDS_CLASS && MFD_MAX77650
+ help
+ LEDs driver for MAX77650 family of PMICs from Maxim Integrated.
+
config LEDS_MAX77693
tristate "LED support for MAX77693 Flash"
depends on LEDS_CLASS_FLASH
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 7a8b1f55d459..1e9702ebffee 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
+obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o
obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
diff --git a/drivers/leds/leds-max77650.c b/drivers/leds/leds-max77650.c
new file mode 100644
index 000000000000..6b74ce9cac12
--- /dev/null
+++ b/drivers/leds/leds-max77650.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// LED driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define MAX77650_LED_NUM_LEDS 3
+
+#define MAX77650_LED_A_BASE 0x40
+#define MAX77650_LED_B_BASE 0x43
+
+#define MAX77650_LED_BR_MASK GENMASK(4, 0)
+#define MAX77650_LED_EN_MASK GENMASK(7, 6)
+
+#define MAX77650_LED_MAX_BRIGHTNESS MAX77650_LED_BR_MASK
+
+/* Enable EN_LED_MSTR. */
+#define MAX77650_LED_TOP_DEFAULT BIT(0)
+
+#define MAX77650_LED_ENABLE GENMASK(7, 6)
+#define MAX77650_LED_DISABLE 0x00
+
+#define MAX77650_LED_A_DEFAULT MAX77650_LED_DISABLE
+/* 100% on duty */
+#define MAX77650_LED_B_DEFAULT GENMASK(3, 0)
+
+struct max77650_led {
+ struct led_classdev cdev;
+ struct regmap *map;
+ unsigned int regA;
+ unsigned int regB;
+};
+
+static struct max77650_led *max77650_to_led(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct max77650_led, cdev);
+}
+
+static int max77650_led_brightness_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct max77650_led *led = max77650_to_led(cdev);
+ int val, mask;
+
+ mask = MAX77650_LED_BR_MASK | MAX77650_LED_EN_MASK;
+
+ if (brightness == LED_OFF)
+ val = MAX77650_LED_DISABLE;
+ else
+ val = MAX77650_LED_ENABLE | brightness;
+
+ return regmap_update_bits(led->map, led->regA, mask, val);
+}
+
+static int max77650_led_probe(struct platform_device *pdev)
+{
+ struct device_node *of_node, *child;
+ struct max77650_led *leds, *led;
+ struct device *parent;
+ struct device *dev;
+ struct regmap *map;
+ const char *label;
+ int rv, num_leds;
+ u32 reg;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+ of_node = dev->of_node;
+
+ if (!of_node)
+ return -ENODEV;
+
+ leds = devm_kcalloc(dev, sizeof(*leds),
+ MAX77650_LED_NUM_LEDS, GFP_KERNEL);
+ if (!leds)
+ return -ENOMEM;
+
+ map = dev_get_regmap(dev->parent, NULL);
+ if (!map)
+ return -ENODEV;
+
+ num_leds = of_get_child_count(of_node);
+ if (!num_leds || num_leds > MAX77650_LED_NUM_LEDS)
+ return -ENODEV;
+
+ for_each_child_of_node(of_node, child) {
+ rv = of_property_read_u32(child, "reg", &reg);
+ if (rv || reg >= MAX77650_LED_NUM_LEDS)
+ return -EINVAL;
+
+ led = &leds[reg];
+ led->map = map;
+ led->regA = MAX77650_LED_A_BASE + reg;
+ led->regB = MAX77650_LED_B_BASE + reg;
+ led->cdev.brightness_set_blocking = max77650_led_brightness_set;
+ led->cdev.max_brightness = MAX77650_LED_MAX_BRIGHTNESS;
+
+ label = of_get_property(child, "label", NULL);
+ if (!label) {
+ led->cdev.name = "max77650::";
+ } else {
+ led->cdev.name = devm_kasprintf(dev, GFP_KERNEL,
+ "max77650:%s", label);
+ if (!led->cdev.name)
+ return -ENOMEM;
+ }
+
+ of_property_read_string(child, "linux,default-trigger",
+ &led->cdev.default_trigger);
+
+ rv = devm_of_led_classdev_register(dev, child, &led->cdev);
+ if (rv)
+ return rv;
+
+ rv = regmap_write(map, led->regA, MAX77650_LED_A_DEFAULT);
+ if (rv)
+ return rv;
+
+ rv = regmap_write(map, led->regB, MAX77650_LED_B_DEFAULT);
+ if (rv)
+ return rv;
+ }
+
+ return regmap_write(map,
+ MAX77650_REG_CNFG_LED_TOP,
+ MAX77650_LED_TOP_DEFAULT);
+}
+
+static struct platform_driver max77650_led_driver = {
+ .driver = {
+ .name = "max77650-led",
+ },
+ .probe = max77650_led_probe,
+};
+module_platform_driver(max77650_led_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 LED driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 26ad6468d13a..294d9567cc71 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -16,7 +16,7 @@ config MFD_CS5535
depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
---help---
This is the core driver for CS5535/CS5536 MFD functions. This is
- necessary for using the board's GPIO and MFGPT functionality.
+ necessary for using the board's GPIO and MFGPT functionality.
config MFD_ALTERA_A10SR
bool "Altera Arria10 DevKit System Resource chip"
@@ -29,6 +29,16 @@ config MFD_ALTERA_A10SR
accessing the external gpio extender (LEDs & buttons) and
power supply alarms (hwmon).
+config MFD_ALTERA_SYSMGR
+ bool "Altera SOCFPGA System Manager"
+ depends on (ARCH_SOCFPGA || ARCH_STRATIX10) && OF
+ select MFD_SYSCON
+ help
+ Select this to get System Manager support for all Altera branded
+ SOCFPGAs. The SOCFPGA System Manager handles all SOCFPGAs by
+ using regmap_mmio accesses for ARM32 parts and SMC calls to
+ EL3 for ARM64 parts.
+
config MFD_ACT8945A
tristate "Active-semi ACT8945A"
select MFD_CORE
@@ -213,13 +223,13 @@ config MFD_CROS_EC
protocol for talking to the EC is defined by the bus driver.
config MFD_CROS_EC_CHARDEV
- tristate "Chrome OS Embedded Controller userspace device interface"
- depends on MFD_CROS_EC
- ---help---
- This driver adds support to talk with the ChromeOS EC from userspace.
+ tristate "Chrome OS Embedded Controller userspace device interface"
+ depends on MFD_CROS_EC
+ ---help---
+ This driver adds support to talk with the ChromeOS EC from userspace.
- If you have a supported Chromebook, choose Y or M here.
- The module will be called cros_ec_dev.
+ If you have a supported Chromebook, choose Y or M here.
+ The module will be called cros_ec_dev.
config MFD_MADERA
tristate "Cirrus Logic Madera codecs"
@@ -733,6 +743,20 @@ config MFD_MAX77620
provides common support for accessing the device; additional drivers
must be enabled in order to use the functionality of the device.
+config MFD_MAX77650
+ tristate "Maxim MAX77650/77651 PMIC Support"
+ depends on I2C
+ depends on OF || COMPILE_TEST
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say Y here to add support for Maxim Semiconductor MAX77650 and
+ MAX77651 Power Management ICs. This is the core multifunction
+ driver for interacting with the device. The module name is
+ 'max77650'. Additional drivers can be enabled in order to use
+ the following functionalities of the device: GPIO, regulator,
+ charger, LED, onkey.
+
config MFD_MAX77686
tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
depends on I2C
@@ -867,7 +891,7 @@ config MFD_CPCAP
At least Motorola Droid 4 is known to use CPCAP.
config MFD_VIPERBOARD
- tristate "Nano River Technologies Viperboard"
+ tristate "Nano River Technologies Viperboard"
select MFD_CORE
depends on USB
default n
@@ -903,15 +927,15 @@ config PCF50633_ADC
tristate "NXP PCF50633 ADC"
depends on MFD_PCF50633
help
- Say yes here if you want to include support for ADC in the
- NXP PCF50633 chip.
+ Say yes here if you want to include support for ADC in the
+ NXP PCF50633 chip.
config PCF50633_GPIO
tristate "NXP PCF50633 GPIO"
depends on MFD_PCF50633
help
- Say yes here if you want to include support GPIO for pins on
- the PCF50633 chip.
+ Say yes here if you want to include support GPIO for pins on
+ the PCF50633 chip.
config UCB1400_CORE
tristate "Philips UCB1400 Core driver"
@@ -1026,7 +1050,7 @@ config MFD_RN5T618
select REGMAP_I2C
help
Say yes here to add support for the Ricoh RN5T567,
- RN5T618, RC5T619 PMIC.
+ RN5T618, RC5T619 PMIC.
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
@@ -1079,9 +1103,9 @@ config MFD_SM501_GPIO
bool "Export GPIO via GPIO layer"
depends on MFD_SM501 && GPIOLIB
---help---
- This option uses the gpio library layer to export the 64 GPIO
- lines on the SM501. The platform data is used to supply the
- base number for the first GPIO line to register.
+ This option uses the gpio library layer to export the 64 GPIO
+ lines on the SM501. The platform data is used to supply the
+ base number for the first GPIO line to register.
config MFD_SKY81452
tristate "Skyworks Solutions SKY81452"
@@ -1096,16 +1120,16 @@ config MFD_SKY81452
will be called sky81452.
config MFD_SMSC
- bool "SMSC ECE1099 series chips"
- depends on I2C=y
- select MFD_CORE
- select REGMAP_I2C
- help
- If you say yes here you get support for the
- ece1099 chips from SMSC.
+ bool "SMSC ECE1099 series chips"
+ depends on I2C=y
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the
+ ece1099 chips from SMSC.
- To compile this driver as a module, choose M here: the
- module will be called smsc.
+ To compile this driver as a module, choose M here: the
+ module will be called smsc.
config MFD_SC27XX_PMIC
tristate "Spreadtrum SC27xx PMICs"
@@ -1171,12 +1195,12 @@ config AB8500_CORE
This chip embeds various other multimedia funtionalities as well.
config AB8500_DEBUG
- bool "Enable debug info via debugfs"
- depends on AB8500_GPADC && DEBUG_FS
- default y if DEBUG_FS
- help
- Select this option if you want debug information using the debug
- filesystem, debugfs.
+ bool "Enable debug info via debugfs"
+ depends on AB8500_GPADC && DEBUG_FS
+ default y if DEBUG_FS
+ help
+ Select this option if you want debug information using the debug
+ filesystem, debugfs.
config AB8500_GPADC
bool "ST-Ericsson AB8500 GPADC driver"
@@ -1907,6 +1931,19 @@ config MFD_STPMIC1
To compile this driver as a module, choose M here: the
module will be called stpmic1.
+config MFD_STMFX
+ tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)"
+ depends on I2C
+ depends on OF || COMPILE_TEST
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Support for the STMicroelectronics Multi-Function eXpander.
+
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the functionality
+ of the device.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b4569ed7f3f3..52b1a90ff515 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
+obj-$(CONFIG_MFD_MAX77650) += max77650.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
obj-$(CONFIG_MFD_MAX77843) += max77843.o
@@ -237,6 +238,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
+obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o
obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
@@ -246,4 +248,4 @@ obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o
obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o
obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
-
+obj-$(CONFIG_MFD_STMFX) += stmfx.o
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 8d652b2f9d14..f70d3f6a959b 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -2587,7 +2587,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file,
}
/*
- * - several deubgfs nodes fops
+ * - several debugfs nodes fops
*/
static const struct file_operations ab8500_bank_fops = {
diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c
new file mode 100644
index 000000000000..8976f82785bb
--- /dev/null
+++ b/drivers/mfd/altera-sysmgr.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018-2019, Intel Corporation.
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro Ltd.
+ *
+ * Based on syscon driver.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/altera-sysmgr.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/**
+ * struct altr_sysmgr - Altera SOCFPGA System Manager
+ * @regmap: the regmap used for System Manager accesses.
+ * @base : the base address for the System Manager
+ */
+struct altr_sysmgr {
+ struct regmap *regmap;
+ resource_size_t *base;
+};
+
+static struct platform_driver altr_sysmgr_driver;
+
+/**
+ * s10_protected_reg_write
+ * Write to a protected SMC register.
+ * @base: Base address of System Manager
+ * @reg: Address offset of register
+ * @val: Value to write
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ * INTEL_SIP_SMC_REG_ERROR on error
+ * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_write(void *base,
+ unsigned int reg, unsigned int val)
+{
+ struct arm_smccc_res result;
+ unsigned long sysmgr_base = (unsigned long)base;
+
+ arm_smccc_smc(INTEL_SIP_SMC_REG_WRITE, sysmgr_base + reg,
+ val, 0, 0, 0, 0, 0, &result);
+
+ return (int)result.a0;
+}
+
+/**
+ * s10_protected_reg_read
+ * Read the status of a protected SMC register
+ * @base: Base address of System Manager.
+ * @reg: Address of register
+ * @val: Value read.
+ * Return: INTEL_SIP_SMC_STATUS_OK (0) on success
+ * INTEL_SIP_SMC_REG_ERROR on error
+ * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported
+ */
+static int s10_protected_reg_read(void *base,
+ unsigned int reg, unsigned int *val)
+{
+ struct arm_smccc_res result;
+ unsigned long sysmgr_base = (unsigned long)base;
+
+ arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sysmgr_base + reg,
+ 0, 0, 0, 0, 0, 0, &result);
+
+ *val = (unsigned int)result.a1;
+
+ return (int)result.a0;
+}
+
+static struct regmap_config altr_sysmgr_regmap_cfg = {
+ .name = "altr_sysmgr",
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .fast_io = true,
+ .use_single_read = true,
+ .use_single_write = true,
+};
+
+/**
+ * sysmgr_match_phandle
+ * Matching function used by driver_find_device().
+ * Return: True if match is found, otherwise false.
+ */
+static int sysmgr_match_phandle(struct device *dev, void *data)
+{
+ return dev->of_node == (struct device_node *)data;
+}
+
+/**
+ * altr_sysmgr_regmap_lookup_by_phandle
+ * Find the sysmgr previous configured in probe() and return regmap property.
+ * Return: regmap if found or error if not found.
+ */
+struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+ const char *property)
+{
+ struct device *dev;
+ struct altr_sysmgr *sysmgr;
+ struct device_node *sysmgr_np;
+
+ if (property)
+ sysmgr_np = of_parse_phandle(np, property, 0);
+ else
+ sysmgr_np = np;
+
+ if (!sysmgr_np)
+ return ERR_PTR(-ENODEV);
+
+ dev = driver_find_device(&altr_sysmgr_driver.driver, NULL,
+ (void *)sysmgr_np, sysmgr_match_phandle);
+ of_node_put(sysmgr_np);
+ if (!dev)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ sysmgr = dev_get_drvdata(dev);
+
+ return sysmgr->regmap;
+}
+EXPORT_SYMBOL_GPL(altr_sysmgr_regmap_lookup_by_phandle);
+
+static int sysmgr_probe(struct platform_device *pdev)
+{
+ struct altr_sysmgr *sysmgr;
+ struct regmap *regmap;
+ struct resource *res;
+ struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL);
+ if (!sysmgr)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
+
+ sysmgr_config.max_register = resource_size(res) -
+ sysmgr_config.reg_stride;
+ if (of_device_is_compatible(np, "altr,sys-mgr-s10")) {
+ /* Need physical address for SMCC call */
+ sysmgr->base = (resource_size_t *)res->start;
+ sysmgr_config.reg_read = s10_protected_reg_read;
+ sysmgr_config.reg_write = s10_protected_reg_write;
+
+ regmap = devm_regmap_init(dev, NULL, sysmgr->base,
+ &sysmgr_config);
+ } else {
+ sysmgr->base = devm_ioremap(dev, res->start,
+ resource_size(res));
+ if (!sysmgr->base)
+ return -ENOMEM;
+
+ sysmgr_config.max_register = res->end - res->start - 3;
+ regmap = devm_regmap_init_mmio(dev, sysmgr->base,
+ &sysmgr_config);
+ }
+
+ if (IS_ERR(regmap)) {
+ pr_err("regmap init failed\n");
+ return PTR_ERR(regmap);
+ }
+
+ sysmgr->regmap = regmap;
+
+ platform_set_drvdata(pdev, sysmgr);
+
+ return 0;
+}
+
+static const struct of_device_id altr_sysmgr_of_match[] = {
+ { .compatible = "altr,sys-mgr" },
+ { .compatible = "altr,sys-mgr-s10" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, altr_sysmgr_of_match);
+
+static struct platform_driver altr_sysmgr_driver = {
+ .probe = sysmgr_probe,
+ .driver = {
+ .name = "altr,system_manager",
+ .of_match_table = altr_sysmgr_of_match,
+ },
+};
+
+static int __init altr_sysmgr_init(void)
+{
+ return platform_driver_register(&altr_sysmgr_driver);
+}
+core_initcall(altr_sysmgr_init);
+
+static void __exit altr_sysmgr_exit(void)
+{
+ platform_driver_unregister(&altr_sysmgr_driver);
+}
+module_exit(altr_sysmgr_exit);
+
+MODULE_AUTHOR("Thor Thayer <>");
+MODULE_DESCRIPTION("SOCFPGA System Manager driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c
index e82543bcfdc8..35a9e16f9902 100644
--- a/drivers/mfd/atmel-hlcdc.c
+++ b/drivers/mfd/atmel-hlcdc.c
@@ -141,6 +141,7 @@ static const struct of_device_id atmel_hlcdc_match[] = {
{ .compatible = "atmel,sama5d2-hlcdc" },
{ .compatible = "atmel,sama5d3-hlcdc" },
{ .compatible = "atmel,sama5d4-hlcdc" },
+ { .compatible = "microchip,sam9x60-hlcdc" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, atmel_hlcdc_match);
diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
index a7b7c5423ea5..c2e8a0dee7f8 100644
--- a/drivers/mfd/axp20x-i2c.c
+++ b/drivers/mfd/axp20x-i2c.c
@@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = {
{ .compatible = "x-powers,axp202", .data = (void *)AXP202_ID },
{ .compatible = "x-powers,axp209", .data = (void *)AXP209_ID },
{ .compatible = "x-powers,axp221", .data = (void *)AXP221_ID },
+ { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
{ },
};
@@ -75,6 +76,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = {
{ "axp202", 0 },
{ "axp209", 0 },
{ "axp221", 0 },
+ { "axp223", 0 },
{ "axp806", 0 },
{ },
};
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 3c97f2c0fdfe..2215660dfa05 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -198,6 +198,12 @@ static const struct resource axp22x_usb_power_supply_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
};
+/* AXP803 and AXP813/AXP818 share the same interrupts */
+static const struct resource axp803_usb_power_supply_resources[] = {
+ DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"),
+ DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"),
+};
+
static const struct resource axp22x_pek_resources[] = {
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
@@ -741,6 +747,11 @@ static const struct mfd_cell axp803_cells[] = {
.of_compatible = "x-powers,axp813-ac-power-supply",
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
.resources = axp20x_ac_power_supply_resources,
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources),
+ .resources = axp803_usb_power_supply_resources,
+ .of_compatible = "x-powers,axp813-usb-power-supply",
},
{ .name = "axp20x-regulator" },
};
@@ -793,6 +804,11 @@ static const struct mfd_cell axp813_cells[] = {
.of_compatible = "x-powers,axp813-ac-power-supply",
.num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources),
.resources = axp20x_ac_power_supply_resources,
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources),
+ .resources = axp803_usb_power_supply_resources,
+ .of_compatible = "x-powers,axp813-usb-power-supply",
},
};
diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c
index 6acfe036d522..bd2bcdd4718b 100644
--- a/drivers/mfd/cros_ec.c
+++ b/drivers/mfd/cros_ec.c
@@ -75,20 +75,49 @@ static irqreturn_t ec_irq_thread(int irq, void *data)
static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event)
{
+ int ret;
struct {
struct cros_ec_command msg;
- struct ec_params_host_sleep_event req;
+ union {
+ struct ec_params_host_sleep_event req0;
+ struct ec_params_host_sleep_event_v1 req1;
+ struct ec_response_host_sleep_event_v1 resp1;
+ } u;
} __packed buf;
memset(&buf, 0, sizeof(buf));
- buf.req.sleep_event = sleep_event;
+ if (ec_dev->host_sleep_v1) {
+ buf.u.req1.sleep_event = sleep_event;
+ buf.u.req1.suspend_params.sleep_timeout_ms =
+ EC_HOST_SLEEP_TIMEOUT_DEFAULT;
+
+ buf.msg.outsize = sizeof(buf.u.req1);
+ if ((sleep_event == HOST_SLEEP_EVENT_S3_RESUME) ||
+ (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME))
+ buf.msg.insize = sizeof(buf.u.resp1);
+
+ buf.msg.version = 1;
+
+ } else {
+ buf.u.req0.sleep_event = sleep_event;
+ buf.msg.outsize = sizeof(buf.u.req0);
+ }
buf.msg.command = EC_CMD_HOST_SLEEP_EVENT;
- buf.msg.version = 0;
- buf.msg.outsize = sizeof(buf.req);
- return cros_ec_cmd_xfer(ec_dev, &buf.msg);
+ ret = cros_ec_cmd_xfer(ec_dev, &buf.msg);
+
+ /* For now, report failure to transition to S0ix with a warning. */
+ if (ret >= 0 && ec_dev->host_sleep_v1 &&
+ (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME))
+ WARN_ONCE(buf.u.resp1.resume_response.sleep_transitions &
+ EC_HOST_RESUME_SLEEP_TIMEOUT,
+ "EC detected sleep transition timeout. Total slp_s0 transitions: %d",
+ buf.u.resp1.resume_response.sleep_transitions &
+ EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK);
+
+ return ret;
}
int cros_ec_register(struct cros_ec_device *ec_dev)
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index d275deaecb12..54a58df571b6 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -385,7 +385,8 @@ static const struct mfd_cell cros_ec_rtc_cells[] = {
};
static const struct mfd_cell cros_usbpd_charger_cells[] = {
- { .name = "cros-usbpd-charger" }
+ { .name = "cros-usbpd-charger" },
+ { .name = "cros-usbpd-logger" },
};
static const struct mfd_cell cros_ec_platform_cells[] = {
@@ -418,6 +419,39 @@ static int ec_device_probe(struct platform_device *pdev)
device_initialize(&ec->class_dev);
cdev_init(&ec->cdev, &fops);
+ /* Check whether this is actually a Fingerprint MCU rather than an EC */
+ if (cros_ec_check_features(ec, EC_FEATURE_FINGERPRINT)) {
+ dev_info(dev, "CrOS Fingerprint MCU detected.\n");
+ /*
+ * Help userspace differentiating ECs from FP MCU,
+ * regardless of the probing order.
+ */
+ ec_platform->ec_name = CROS_EC_DEV_FP_NAME;
+ }
+
+ /*
+ * Check whether this is actually an Integrated Sensor Hub (ISH)
+ * rather than an EC.
+ */
+ if (cros_ec_check_features(ec, EC_FEATURE_ISH)) {
+ dev_info(dev, "CrOS ISH MCU detected.\n");
+ /*
+ * Help userspace differentiating ECs from ISH MCU,
+ * regardless of the probing order.
+ */
+ ec_platform->ec_name = CROS_EC_DEV_ISH_NAME;
+ }
+
+ /* Check whether this is actually a Touchpad MCU rather than an EC */
+ if (cros_ec_check_features(ec, EC_FEATURE_TOUCHPAD)) {
+ dev_info(dev, "CrOS Touchpad MCU detected.\n");
+ /*
+ * Help userspace differentiating ECs from TP MCU,
+ * regardless of the probing order.
+ */
+ ec_platform->ec_name = CROS_EC_DEV_TP_NAME;
+ }
+
/*
* Add the class device
* Link to the character device for creating the /dev entry
diff --git a/drivers/mfd/cs47l35-tables.c b/drivers/mfd/cs47l35-tables.c
index 604c9dd14df5..338b825127f1 100644
--- a/drivers/mfd/cs47l35-tables.c
+++ b/drivers/mfd/cs47l35-tables.c
@@ -178,6 +178,7 @@ static const struct reg_default cs47l35_reg_default[] = {
{ 0x00000448, 0x0a83 }, /* R1096 (0x448) - eDRE Enable */
{ 0x0000044a, 0x0000 }, /* R1098 (0x44a) - eDRE Manual */
{ 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */
+ { 0x00000451, 0x0000 }, /* R1105 (0x451) - DAC AEC Control 2 */
{ 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */
{ 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */
{ 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */
@@ -970,6 +971,7 @@ static bool cs47l35_16bit_readable_register(struct device *dev,
case MADERA_EDRE_ENABLE:
case MADERA_EDRE_MANUAL:
case MADERA_DAC_AEC_CONTROL_1:
+ case MADERA_DAC_AEC_CONTROL_2:
case MADERA_NOISE_GATE_CONTROL:
case MADERA_PDM_SPK1_CTRL_1:
case MADERA_PDM_SPK1_CTRL_2:
diff --git a/drivers/mfd/cs47l90-tables.c b/drivers/mfd/cs47l90-tables.c
index 77207d98f0cc..c040d3d7232a 100644
--- a/drivers/mfd/cs47l90-tables.c
+++ b/drivers/mfd/cs47l90-tables.c
@@ -263,6 +263,7 @@ static const struct reg_default cs47l90_reg_default[] = {
{ 0x00000440, 0x003f }, /* R1088 (0x440) - DRE Enable */
{ 0x00000448, 0x003f }, /* R1096 (0x448) - eDRE Enable */
{ 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */
+ { 0x00000451, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 2 */
{ 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */
{ 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */
{ 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */
@@ -1692,6 +1693,7 @@ static bool cs47l90_16bit_readable_register(struct device *dev,
case MADERA_DRE_ENABLE:
case MADERA_EDRE_ENABLE:
case MADERA_DAC_AEC_CONTROL_1:
+ case MADERA_DAC_AEC_CONTROL_2:
case MADERA_NOISE_GATE_CONTROL:
case MADERA_PDM_SPK1_CTRL_1:
case MADERA_PDM_SPK1_CTRL_2:
diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
index 6e4ce49b4405..b125f90dd375 100644
--- a/drivers/mfd/da9063-core.c
+++ b/drivers/mfd/da9063-core.c
@@ -1,5 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
- * da9063-core.c: Device access for Dialog DA9063 modules
+ * Device access for Dialog DA9063 modules
*
* Copyright 2012 Dialog Semiconductors Ltd.
* Copyright 2013 Philipp Zabel, Pengutronix
@@ -7,11 +8,6 @@
* Author: Krystian Garbaciak, Dialog Semiconductor
* Author: Michal Hajduk, Dialog Semiconductor
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
*/
#include <linux/kernel.h>
@@ -26,7 +22,6 @@
#include <linux/regmap.h>
#include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
#include <linux/proc_fs.h>
@@ -165,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063)
int da9063_device_init(struct da9063 *da9063, unsigned int irq)
{
- struct da9063_pdata *pdata = da9063->dev->platform_data;
int model, variant_id, variant_code;
int ret;
@@ -173,24 +167,10 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
if (ret < 0)
dev_err(da9063->dev, "Cannot clear fault log\n");
- if (pdata) {
- da9063->flags = pdata->flags;
- da9063->irq_base = pdata->irq_base;
- } else {
- da9063->flags = 0;
- da9063->irq_base = -1;
- }
+ da9063->flags = 0;
+ da9063->irq_base = -1;
da9063->chip_irq = irq;
- if (pdata && pdata->init != NULL) {
- ret = pdata->init(da9063);
- if (ret != 0) {
- dev_err(da9063->dev,
- "Platform initialization failed.\n");
- return ret;
- }
- }
-
ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model);
if (ret < 0) {
dev_err(da9063->dev, "Cannot read chip model id.\n");
diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
index 50a24b1921d0..455de74c0dd2 100644
--- a/drivers/mfd/da9063-i2c.c
+++ b/drivers/mfd/da9063-i2c.c
@@ -1,15 +1,10 @@
-/* da9063-i2c.c: Interrupt support for Dialog DA9063
+// SPDX-License-Identifier: GPL-2.0+
+/* I2C support for Dialog DA9063
*
* Copyright 2012 Dialog Semiconductor Ltd.
* Copyright 2013 Philipp Zabel, Pengutronix
*
* Author: Krystian Garbaciak, Dialog Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
*/
#include <linux/kernel.h>
@@ -22,7 +17,6 @@
#include <linux/mfd/core.h>
#include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
#include <linux/mfd/da9063/registers.h>
#include <linux/of.h>
diff --git a/drivers/mfd/da9063-irq.c b/drivers/mfd/da9063-irq.c
index ecc0c8ce6c58..e2bbedf58e68 100644
--- a/drivers/mfd/da9063-irq.c
+++ b/drivers/mfd/da9063-irq.c
@@ -1,15 +1,10 @@
-/* da9063-irq.c: Interrupts support for Dialog DA9063
+// SPDX-License-Identifier: GPL-2.0+
+/* Interrupt support for Dialog DA9063
*
* Copyright 2012 Dialog Semiconductor Ltd.
* Copyright 2013 Philipp Zabel, Pengutronix
*
* Author: Michal Hajduk, Dialog Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
*/
#include <linux/kernel.h>
@@ -19,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/mfd/da9063/core.h>
-#include <linux/mfd/da9063/pdata.h>
#define DA9063_REG_EVENT_A_OFFSET 0
#define DA9063_REG_EVENT_B_OFFSET 1
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index cba2eb166650..6b111be944d9 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -129,6 +129,19 @@ static const struct intel_lpss_platform_info cnl_i2c_info = {
};
static const struct pci_device_id intel_lpss_pci_ids[] = {
+ /* CML */
+ { PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info },
+ { PCI_VDEVICE(INTEL, 0x02a9), (kernel_ulong_t)&spt_uart_info },
+ { PCI_VDEVICE(INTEL, 0x02aa), (kernel_ulong_t)&spt_info },
+ { PCI_VDEVICE(INTEL, 0x02ab), (kernel_ulong_t)&spt_info },
+ { PCI_VDEVICE(INTEL, 0x02c5), (kernel_ulong_t)&cnl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x02c6), (kernel_ulong_t)&cnl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x02c7), (kernel_ulong_t)&spt_uart_info },
+ { PCI_VDEVICE(INTEL, 0x02e8), (kernel_ulong_t)&cnl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x02e9), (kernel_ulong_t)&cnl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x02ea), (kernel_ulong_t)&cnl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x02eb), (kernel_ulong_t)&cnl_i2c_info },
+ { PCI_VDEVICE(INTEL, 0x02fb), (kernel_ulong_t)&spt_info },
/* BXT A-Step */
{ PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info },
{ PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info },
diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index 45221e092ecf..7e425ff53491 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss)
{
u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN;
+ /* Set the device in reset state */
+ writel(0, lpss->priv + LPSS_PRIV_RESETS);
+
intel_lpss_deassert_reset(lpss);
intel_lpss_set_remap_addr(lpss);
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index 5bddb84cfc1f..11adbf77960d 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -74,16 +74,6 @@ static const struct dmi_system_id dmi_platform_info[] = {
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
- DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
- "6ES7647-0AA00-0YA2"),
- },
- .driver_data = (void *)400000,
- },
- {
- .matches = {
- DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
- DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG,
- "6ES7647-0AA00-1YA2"),
},
.driver_data = (void *)400000,
},
diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c b/drivers/mfd/intel_soc_pmic_chtwc.c
index 64a3aece9c5e..be84bb2aa837 100644
--- a/drivers/mfd/intel_soc_pmic_chtwc.c
+++ b/drivers/mfd/intel_soc_pmic_chtwc.c
@@ -60,6 +60,7 @@ static struct mfd_cell cht_wc_dev[] = {
.resources = cht_wc_ext_charger_resources,
},
{ .name = "cht_wcove_region", },
+ { .name = "cht_wcove_leds", },
};
/*
diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c
index d8ddd1a6f304..436361ce3737 100644
--- a/drivers/mfd/max77620.c
+++ b/drivers/mfd/max77620.c
@@ -37,6 +37,8 @@
#include <linux/regmap.h>
#include <linux/slab.h>
+static struct max77620_chip *max77620_scratch;
+
static const struct resource gpio_resources[] = {
DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO),
};
@@ -111,6 +113,26 @@ static const struct mfd_cell max20024_children[] = {
},
};
+static const struct mfd_cell max77663_children[] = {
+ { .name = "max77620-pinctrl", },
+ { .name = "max77620-clock", },
+ { .name = "max77663-pmic", },
+ { .name = "max77620-watchdog", },
+ {
+ .name = "max77620-gpio",
+ .resources = gpio_resources,
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ }, {
+ .name = "max77620-rtc",
+ .resources = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ }, {
+ .name = "max77663-power",
+ .resources = power_resources,
+ .num_resources = ARRAY_SIZE(power_resources),
+ },
+};
+
static const struct regmap_range max77620_readable_ranges[] = {
regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4),
};
@@ -171,6 +193,35 @@ static const struct regmap_config max20024_regmap_config = {
.volatile_table = &max77620_volatile_table,
};
+static const struct regmap_range max77663_readable_ranges[] = {
+ regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_readable_table = {
+ .yes_ranges = max77663_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges),
+};
+
+static const struct regmap_range max77663_writable_ranges[] = {
+ regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5),
+};
+
+static const struct regmap_access_table max77663_writable_table = {
+ .yes_ranges = max77663_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges),
+};
+
+static const struct regmap_config max77663_regmap_config = {
+ .name = "power-slave",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77620_REG_CID5 + 1,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &max77663_readable_table,
+ .wr_table = &max77663_writable_table,
+ .volatile_table = &max77620_volatile_table,
+};
+
/*
* MAX77620 and MAX20024 has the following steps of the interrupt handling
* for TOP interrupts:
@@ -240,6 +291,9 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip,
case MAX77620:
fps_min_period = MAX77620_FPS_PERIOD_MIN_US;
break;
+ case MAX77663:
+ fps_min_period = MAX20024_FPS_PERIOD_MIN_US;
+ break;
default:
return -EINVAL;
}
@@ -274,6 +328,9 @@ static int max77620_config_fps(struct max77620_chip *chip,
case MAX77620:
fps_max_period = MAX77620_FPS_PERIOD_MAX_US;
break;
+ case MAX77663:
+ fps_max_period = MAX20024_FPS_PERIOD_MAX_US;
+ break;
default:
return -EINVAL;
}
@@ -375,6 +432,9 @@ static int max77620_initialise_fps(struct max77620_chip *chip)
}
skip_fps:
+ if (chip->chip_id == MAX77663)
+ return 0;
+
/* Enable wake on EN0 pin */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0,
@@ -423,6 +483,15 @@ static int max77620_read_es_version(struct max77620_chip *chip)
return ret;
}
+static void max77620_pm_power_off(void)
+{
+ struct max77620_chip *chip = max77620_scratch;
+
+ regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1,
+ MAX77620_ONOFFCNFG1_SFT_RST,
+ MAX77620_ONOFFCNFG1_SFT_RST);
+}
+
static int max77620_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -430,6 +499,7 @@ static int max77620_probe(struct i2c_client *client,
struct max77620_chip *chip;
const struct mfd_cell *mfd_cells;
int n_mfd_cells;
+ bool pm_off;
int ret;
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
@@ -453,6 +523,11 @@ static int max77620_probe(struct i2c_client *client,
n_mfd_cells = ARRAY_SIZE(max20024_children);
rmap_config = &max20024_regmap_config;
break;
+ case MAX77663:
+ mfd_cells = max77663_children;
+ n_mfd_cells = ARRAY_SIZE(max77663_children);
+ rmap_config = &max77663_regmap_config;
+ break;
default:
dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id);
return -EINVAL;
@@ -491,6 +566,12 @@ static int max77620_probe(struct i2c_client *client,
return ret;
}
+ pm_off = of_device_is_system_power_controller(client->dev.of_node);
+ if (pm_off && !pm_power_off) {
+ max77620_scratch = chip;
+ pm_power_off = max77620_pm_power_off;
+ }
+
return 0;
}
@@ -546,6 +627,9 @@ static int max77620_i2c_suspend(struct device *dev)
return ret;
}
+ if (chip->chip_id == MAX77663)
+ goto out;
+
/* Disable WK_EN0 */
ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2,
MAX77620_ONOFFCNFG2_WK_EN0, 0);
@@ -581,7 +665,7 @@ static int max77620_i2c_resume(struct device *dev)
* For MAX20024: No need to configure WKEN0 on resume as
* it is configured on Init.
*/
- if (chip->chip_id == MAX20024)
+ if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663)
goto out;
/* Enable WK_EN0 */
@@ -603,6 +687,7 @@ out:
static const struct i2c_device_id max77620_id[] = {
{"max77620", MAX77620},
{"max20024", MAX20024},
+ {"max77663", MAX77663},
{},
};
diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c
new file mode 100644
index 000000000000..60e07aca6ae5
--- /dev/null
+++ b/drivers/mfd/max77650.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Core MFD driver for MAXIM 77650/77651 charger/power-supply.
+// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#define MAX77650_INT_GPI_F_MSK BIT(0)
+#define MAX77650_INT_GPI_R_MSK BIT(1)
+#define MAX77650_INT_GPI_MSK \
+ (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK)
+#define MAX77650_INT_nEN_F_MSK BIT(2)
+#define MAX77650_INT_nEN_R_MSK BIT(3)
+#define MAX77650_INT_TJAL1_R_MSK BIT(4)
+#define MAX77650_INT_TJAL2_R_MSK BIT(5)
+#define MAX77650_INT_DOD_R_MSK BIT(6)
+
+#define MAX77650_INT_THM_MSK BIT(0)
+#define MAX77650_INT_CHG_MSK BIT(1)
+#define MAX77650_INT_CHGIN_MSK BIT(2)
+#define MAX77650_INT_TJ_REG_MSK BIT(3)
+#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4)
+#define MAX77650_INT_SYS_CTRL_MSK BIT(5)
+#define MAX77650_INT_SYS_CNFG_MSK BIT(6)
+
+#define MAX77650_INT_GLBL_OFFSET 0
+#define MAX77650_INT_CHG_OFFSET 1
+
+#define MAX77650_SBIA_LPM_MASK BIT(5)
+#define MAX77650_SBIA_LPM_DISABLED 0x00
+
+enum {
+ MAX77650_INT_GPI,
+ MAX77650_INT_nEN_F,
+ MAX77650_INT_nEN_R,
+ MAX77650_INT_TJAL1_R,
+ MAX77650_INT_TJAL2_R,
+ MAX77650_INT_DOD_R,
+ MAX77650_INT_THM,
+ MAX77650_INT_CHG,
+ MAX77650_INT_CHGIN,
+ MAX77650_INT_TJ_REG,
+ MAX77650_INT_CHGIN_CTRL,
+ MAX77650_INT_SYS_CTRL,
+ MAX77650_INT_SYS_CNFG,
+};
+
+static const struct resource max77650_charger_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"),
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"),
+};
+
+static const struct resource max77650_gpio_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"),
+};
+
+static const struct resource max77650_onkey_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"),
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"),
+};
+
+static const struct mfd_cell max77650_cells[] = {
+ {
+ .name = "max77650-regulator",
+ .of_compatible = "maxim,max77650-regulator",
+ }, {
+ .name = "max77650-charger",
+ .of_compatible = "maxim,max77650-charger",
+ .resources = max77650_charger_resources,
+ .num_resources = ARRAY_SIZE(max77650_charger_resources),
+ }, {
+ .name = "max77650-gpio",
+ .of_compatible = "maxim,max77650-gpio",
+ .resources = max77650_gpio_resources,
+ .num_resources = ARRAY_SIZE(max77650_gpio_resources),
+ }, {
+ .name = "max77650-led",
+ .of_compatible = "maxim,max77650-led",
+ }, {
+ .name = "max77650-onkey",
+ .of_compatible = "maxim,max77650-onkey",
+ .resources = max77650_onkey_resources,
+ .num_resources = ARRAY_SIZE(max77650_onkey_resources),
+ },
+};
+
+static const struct regmap_irq max77650_irqs[] = {
+ [MAX77650_INT_GPI] = {
+ .reg_offset = MAX77650_INT_GLBL_OFFSET,
+ .mask = MAX77650_INT_GPI_MSK,
+ .type = {
+ .type_falling_val = MAX77650_INT_GPI_F_MSK,
+ .type_rising_val = MAX77650_INT_GPI_R_MSK,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
+ },
+ REGMAP_IRQ_REG(MAX77650_INT_nEN_F,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_nEN_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_DOD_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_THM,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_CHG,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_CHGIN,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_TJ_REG,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK),
+};
+
+static const struct regmap_irq_chip max77650_irq_chip = {
+ .name = "max77650-irq",
+ .irqs = max77650_irqs,
+ .num_irqs = ARRAY_SIZE(max77650_irqs),
+ .num_regs = 2,
+ .status_base = MAX77650_REG_INT_GLBL,
+ .mask_base = MAX77650_REG_INTM_GLBL,
+ .type_in_mask = true,
+ .type_invert = true,
+ .init_ack_masked = true,
+ .clear_on_unmask = true,
+};
+
+static const struct regmap_config max77650_regmap_config = {
+ .name = "max77650",
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int max77650_i2c_probe(struct i2c_client *i2c)
+{
+ struct regmap_irq_chip_data *irq_data;
+ struct device *dev = &i2c->dev;
+ struct irq_domain *domain;
+ struct regmap *map;
+ unsigned int val;
+ int rv, id;
+
+ map = devm_regmap_init_i2c(i2c, &max77650_regmap_config);
+ if (IS_ERR(map)) {
+ dev_err(dev, "Unable to initialise I2C Regmap\n");
+ return PTR_ERR(map);
+ }
+
+ rv = regmap_read(map, MAX77650_REG_CID, &val);
+ if (rv) {
+ dev_err(dev, "Unable to read Chip ID\n");
+ return rv;
+ }
+
+ id = MAX77650_CID_BITS(val);
+ switch (id) {
+ case MAX77650_CID_77650A:
+ case MAX77650_CID_77650C:
+ case MAX77650_CID_77651A:
+ case MAX77650_CID_77651B:
+ break;
+ default:
+ dev_err(dev, "Chip not supported - ID: 0x%02x\n", id);
+ return -ENODEV;
+ }
+
+ /*
+ * This IC has a low-power mode which reduces the quiescent current
+ * consumption to ~5.6uA but is only suitable for systems consuming
+ * less than ~2mA. Since this is not likely the case even on
+ * linux-based wearables - keep the chip in normal power mode.
+ */
+ rv = regmap_update_bits(map,
+ MAX77650_REG_CNFG_GLBL,
+ MAX77650_SBIA_LPM_MASK,
+ MAX77650_SBIA_LPM_DISABLED);
+ if (rv) {
+ dev_err(dev, "Unable to change the power mode\n");
+ return rv;
+ }
+
+ rv = devm_regmap_add_irq_chip(dev, map, i2c->irq,
+ IRQF_ONESHOT | IRQF_SHARED, 0,
+ &max77650_irq_chip, &irq_data);
+ if (rv) {
+ dev_err(dev, "Unable to add Regmap IRQ chip\n");
+ return rv;
+ }
+
+ domain = regmap_irq_get_domain(irq_data);
+
+ return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+ max77650_cells, ARRAY_SIZE(max77650_cells),
+ NULL, 0, domain);
+}
+
+static const struct of_device_id max77650_of_match[] = {
+ { .compatible = "maxim,max77650" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max77650_of_match);
+
+static struct i2c_driver max77650_i2c_driver = {
+ .driver = {
+ .name = "max77650",
+ .of_match_table = of_match_ptr(max77650_of_match),
+ },
+ .probe_new = max77650_i2c_probe,
+};
+module_i2c_driver(max77650_i2c_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 94e3f32ce935..1ade4c8cc91f 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -269,6 +269,19 @@ fail_alloc:
return ret;
}
+/**
+ * mfd_add_devices - register child devices
+ *
+ * @parent: Pointer to parent device.
+ * @id: Can be PLATFORM_DEVID_AUTO to let the Platform API take care
+ * of device numbering, or will be added to a device's cell_id.
+ * @cells: Array of (struct mfd_cell)s describing child devices.
+ * @n_devs: Number of child devices to register.
+ * @mem_base: Parent register range resource for child devices.
+ * @irq_base: Base of the range of virtual interrupt numbers allocated for
+ * this MFD device. Unused if @domain is specified.
+ * @domain: Interrupt domain to create mappings for hardware interrupts.
+ */
int mfd_add_devices(struct device *parent, int id,
const struct mfd_cell *cells, int n_devs,
struct resource *mem_base,
diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
index 216fbf6adec9..94377782d208 100644
--- a/drivers/mfd/rk808.c
+++ b/drivers/mfd/rk808.c
@@ -568,14 +568,6 @@ static int rk808_remove(struct i2c_client *client)
return 0;
}
-static const struct i2c_device_id rk808_ids[] = {
- { "rk805" },
- { "rk808" },
- { "rk818" },
- { },
-};
-MODULE_DEVICE_TABLE(i2c, rk808_ids);
-
static struct i2c_driver rk808_i2c_driver = {
.driver = {
.name = "rk808",
@@ -583,7 +575,6 @@ static struct i2c_driver rk808_i2c_driver = {
},
.probe = rk808_probe,
.remove = rk808_remove,
- .id_table = rk808_ids,
};
module_i2c_driver(rk808_i2c_driver);
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 521319086c81..95473ff9bb4b 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -28,45 +28,33 @@
#include <linux/regmap.h>
static const struct mfd_cell s5m8751_devs[] = {
- {
- .name = "s5m8751-pmic",
- }, {
- .name = "s5m-charger",
- }, {
- .name = "s5m8751-codec",
- },
+ { .name = "s5m8751-pmic", },
+ { .name = "s5m-charger", },
+ { .name = "s5m8751-codec", },
};
static const struct mfd_cell s5m8763_devs[] = {
- {
- .name = "s5m8763-pmic",
- }, {
- .name = "s5m-rtc",
- }, {
- .name = "s5m-charger",
- },
+ { .name = "s5m8763-pmic", },
+ { .name = "s5m-rtc", },
+ { .name = "s5m-charger", },
};
static const struct mfd_cell s5m8767_devs[] = {
+ { .name = "s5m8767-pmic", },
+ { .name = "s5m-rtc", },
{
- .name = "s5m8767-pmic",
- }, {
- .name = "s5m-rtc",
- }, {
.name = "s5m8767-clk",
.of_compatible = "samsung,s5m8767-clk",
- }
+ },
};
static const struct mfd_cell s2mps11_devs[] = {
+ { .name = "s2mps11-regulator", },
+ { .name = "s2mps14-rtc", },
{
- .name = "s2mps11-regulator",
- }, {
- .name = "s2mps14-rtc",
- }, {
.name = "s2mps11-clk",
.of_compatible = "samsung,s2mps11-clk",
- }
+ },
};
static const struct mfd_cell s2mps13_devs[] = {
@@ -79,37 +67,30 @@ static const struct mfd_cell s2mps13_devs[] = {
};
static const struct mfd_cell s2mps14_devs[] = {
+ { .name = "s2mps14-regulator", },
+ { .name = "s2mps14-rtc", },
{
- .name = "s2mps14-regulator",
- }, {
- .name = "s2mps14-rtc",
- }, {
.name = "s2mps14-clk",
.of_compatible = "samsung,s2mps14-clk",
- }
+ },
};
static const struct mfd_cell s2mps15_devs[] = {
+ { .name = "s2mps15-regulator", },
+ { .name = "s2mps15-rtc", },
{
- .name = "s2mps15-regulator",
- }, {
- .name = "s2mps15-rtc",
- }, {
.name = "s2mps13-clk",
.of_compatible = "samsung,s2mps13-clk",
},
};
static const struct mfd_cell s2mpa01_devs[] = {
- {
- .name = "s2mpa01-pmic",
- },
+ { .name = "s2mpa01-pmic", },
+ { .name = "s2mps14-rtc", },
};
static const struct mfd_cell s2mpu02_devs[] = {
- {
- .name = "s2mpu02-regulator",
- },
+ { .name = "s2mpu02-regulator", },
};
#ifdef CONFIG_OF
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index ad0099077e7e..a98c5d165039 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -455,6 +455,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
case S5M8767X:
sec_irq_chip = &s5m8767_irq_chip;
break;
+ case S2MPA01:
+ sec_irq_chip = &s2mps14_irq_chip;
+ break;
case S2MPS11X:
sec_irq_chip = &s2mps11_irq_chip;
break;
diff --git a/drivers/mfd/ssbi.c b/drivers/mfd/ssbi.c
index 36b96fee4ce6..0ae27cd30268 100644
--- a/drivers/mfd/ssbi.c
+++ b/drivers/mfd/ssbi.c
@@ -80,8 +80,6 @@ struct ssbi {
int (*write)(struct ssbi *, u16 addr, const u8 *buf, int len);
};
-#define to_ssbi(dev) platform_get_drvdata(to_platform_device(dev))
-
static inline u32 ssbi_readl(struct ssbi *ssbi, u32 reg)
{
return readl(ssbi->base + reg);
@@ -243,7 +241,7 @@ err:
int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len)
{
- struct ssbi *ssbi = to_ssbi(dev);
+ struct ssbi *ssbi = dev_get_drvdata(dev);
unsigned long flags;
int ret;
@@ -257,7 +255,7 @@ EXPORT_SYMBOL_GPL(ssbi_read);
int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len)
{
- struct ssbi *ssbi = to_ssbi(dev);
+ struct ssbi *ssbi = dev_get_drvdata(dev);
unsigned long flags;
int ret;
diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c
new file mode 100644
index 000000000000..fe8efba2d45f
--- /dev/null
+++ b/drivers/mfd/stmfx.c
@@ -0,0 +1,545 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for STMicroelectronics Multi-Function eXpander (STMFX) core
+ *
+ * Copyright (C) 2019 STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
+ */
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stmfx.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+
+static bool stmfx_reg_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case STMFX_REG_SYS_CTRL:
+ case STMFX_REG_IRQ_SRC_EN:
+ case STMFX_REG_IRQ_PENDING:
+ case STMFX_REG_IRQ_GPI_PENDING1:
+ case STMFX_REG_IRQ_GPI_PENDING2:
+ case STMFX_REG_IRQ_GPI_PENDING3:
+ case STMFX_REG_GPIO_STATE1:
+ case STMFX_REG_GPIO_STATE2:
+ case STMFX_REG_GPIO_STATE3:
+ case STMFX_REG_IRQ_GPI_SRC1:
+ case STMFX_REG_IRQ_GPI_SRC2:
+ case STMFX_REG_IRQ_GPI_SRC3:
+ case STMFX_REG_GPO_SET1:
+ case STMFX_REG_GPO_SET2:
+ case STMFX_REG_GPO_SET3:
+ case STMFX_REG_GPO_CLR1:
+ case STMFX_REG_GPO_CLR2:
+ case STMFX_REG_GPO_CLR3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool stmfx_reg_writeable(struct device *dev, unsigned int reg)
+{
+ return (reg >= STMFX_REG_SYS_CTRL);
+}
+
+static const struct regmap_config stmfx_regmap_config = {
+ .reg_bits = 8,
+ .reg_stride = 1,
+ .val_bits = 8,
+ .max_register = STMFX_REG_MAX,
+ .volatile_reg = stmfx_reg_volatile,
+ .writeable_reg = stmfx_reg_writeable,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static const struct resource stmfx_pinctrl_resources[] = {
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_GPIO),
+};
+
+static const struct resource stmfx_idd_resources[] = {
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_IDD),
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_ERROR),
+};
+
+static const struct resource stmfx_ts_resources[] = {
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_DET),
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_NE),
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_TH),
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_FULL),
+ DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_OVF),
+};
+
+static struct mfd_cell stmfx_cells[] = {
+ {
+ .of_compatible = "st,stmfx-0300-pinctrl",
+ .name = "stmfx-pinctrl",
+ .resources = stmfx_pinctrl_resources,
+ .num_resources = ARRAY_SIZE(stmfx_pinctrl_resources),
+ },
+ {
+ .of_compatible = "st,stmfx-0300-idd",
+ .name = "stmfx-idd",
+ .resources = stmfx_idd_resources,
+ .num_resources = ARRAY_SIZE(stmfx_idd_resources),
+ },
+ {
+ .of_compatible = "st,stmfx-0300-ts",
+ .name = "stmfx-ts",
+ .resources = stmfx_ts_resources,
+ .num_resources = ARRAY_SIZE(stmfx_ts_resources),
+ },
+};
+
+static u8 stmfx_func_to_mask(u32 func)
+{
+ u8 mask = 0;
+
+ if (func & STMFX_FUNC_GPIO)
+ mask |= STMFX_REG_SYS_CTRL_GPIO_EN;
+
+ if ((func & STMFX_FUNC_ALTGPIO_LOW) || (func & STMFX_FUNC_ALTGPIO_HIGH))
+ mask |= STMFX_REG_SYS_CTRL_ALTGPIO_EN;
+
+ if (func & STMFX_FUNC_TS)
+ mask |= STMFX_REG_SYS_CTRL_TS_EN;
+
+ if (func & STMFX_FUNC_IDD)
+ mask |= STMFX_REG_SYS_CTRL_IDD_EN;
+
+ return mask;
+}
+
+int stmfx_function_enable(struct stmfx *stmfx, u32 func)
+{
+ u32 sys_ctrl;
+ u8 mask;
+ int ret;
+
+ ret = regmap_read(stmfx->map, STMFX_REG_SYS_CTRL, &sys_ctrl);
+ if (ret)
+ return ret;
+
+ /*
+ * IDD and TS have priority in STMFX FW, so if IDD and TS are enabled,
+ * ALTGPIO function is disabled by STMFX FW. If IDD or TS is enabled,
+ * the number of aGPIO available decreases. To avoid GPIO management
+ * disturbance, abort IDD or TS function enable in this case.
+ */
+ if (((func & STMFX_FUNC_IDD) || (func & STMFX_FUNC_TS)) &&
+ (sys_ctrl & STMFX_REG_SYS_CTRL_ALTGPIO_EN)) {
+ dev_err(stmfx->dev, "ALTGPIO function already enabled\n");
+ return -EBUSY;
+ }
+
+ /* If TS is enabled, aGPIO[3:0] cannot be used */
+ if ((func & STMFX_FUNC_ALTGPIO_LOW) &&
+ (sys_ctrl & STMFX_REG_SYS_CTRL_TS_EN)) {
+ dev_err(stmfx->dev, "TS in use, aGPIO[3:0] unavailable\n");
+ return -EBUSY;
+ }
+
+ /* If IDD is enabled, aGPIO[7:4] cannot be used */
+ if ((func & STMFX_FUNC_ALTGPIO_HIGH) &&
+ (sys_ctrl & STMFX_REG_SYS_CTRL_IDD_EN)) {
+ dev_err(stmfx->dev, "IDD in use, aGPIO[7:4] unavailable\n");
+ return -EBUSY;
+ }
+
+ mask = stmfx_func_to_mask(func);
+
+ return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, mask);
+}
+EXPORT_SYMBOL_GPL(stmfx_function_enable);
+
+int stmfx_function_disable(struct stmfx *stmfx, u32 func)
+{
+ u8 mask = stmfx_func_to_mask(func);
+
+ return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, 0);
+}
+EXPORT_SYMBOL_GPL(stmfx_function_disable);
+
+static void stmfx_irq_bus_lock(struct irq_data *data)
+{
+ struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+ mutex_lock(&stmfx->lock);
+}
+
+static void stmfx_irq_bus_sync_unlock(struct irq_data *data)
+{
+ struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+ regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, stmfx->irq_src);
+
+ mutex_unlock(&stmfx->lock);
+}
+
+static void stmfx_irq_mask(struct irq_data *data)
+{
+ struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+ stmfx->irq_src &= ~BIT(data->hwirq % 8);
+}
+
+static void stmfx_irq_unmask(struct irq_data *data)
+{
+ struct stmfx *stmfx = irq_data_get_irq_chip_data(data);
+
+ stmfx->irq_src |= BIT(data->hwirq % 8);
+}
+
+static struct irq_chip stmfx_irq_chip = {
+ .name = "stmfx-core",
+ .irq_bus_lock = stmfx_irq_bus_lock,
+ .irq_bus_sync_unlock = stmfx_irq_bus_sync_unlock,
+ .irq_mask = stmfx_irq_mask,
+ .irq_unmask = stmfx_irq_unmask,
+};
+
+static irqreturn_t stmfx_irq_handler(int irq, void *data)
+{
+ struct stmfx *stmfx = data;
+ unsigned long n, pending;
+ u32 ack;
+ int ret;
+
+ ret = regmap_read(stmfx->map, STMFX_REG_IRQ_PENDING,
+ (u32 *)&pending);
+ if (ret)
+ return IRQ_NONE;
+
+ /*
+ * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR
+ * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3
+ */
+ ack = pending & ~BIT(STMFX_REG_IRQ_SRC_EN_GPIO);
+ if (ack) {
+ ret = regmap_write(stmfx->map, STMFX_REG_IRQ_ACK, ack);
+ if (ret)
+ return IRQ_NONE;
+ }
+
+ for_each_set_bit(n, &pending, STMFX_REG_IRQ_SRC_MAX)
+ handle_nested_irq(irq_find_mapping(stmfx->irq_domain, n));
+
+ return IRQ_HANDLED;
+}
+
+static int stmfx_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(virq, d->host_data);
+ irq_set_chip_and_handler(virq, &stmfx_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(virq, 1);
+ irq_set_noprobe(virq);
+
+ return 0;
+}
+
+static void stmfx_irq_unmap(struct irq_domain *d, unsigned int virq)
+{
+ irq_set_chip_and_handler(virq, NULL, NULL);
+ irq_set_chip_data(virq, NULL);
+}
+
+static const struct irq_domain_ops stmfx_irq_ops = {
+ .map = stmfx_irq_map,
+ .unmap = stmfx_irq_unmap,
+};
+
+static void stmfx_irq_exit(struct i2c_client *client)
+{
+ struct stmfx *stmfx = i2c_get_clientdata(client);
+ int hwirq;
+
+ for (hwirq = 0; hwirq < STMFX_REG_IRQ_SRC_MAX; hwirq++)
+ irq_dispose_mapping(irq_find_mapping(stmfx->irq_domain, hwirq));
+
+ irq_domain_remove(stmfx->irq_domain);
+}
+
+static int stmfx_irq_init(struct i2c_client *client)
+{
+ struct stmfx *stmfx = i2c_get_clientdata(client);
+ u32 irqoutpin = 0, irqtrigger;
+ int ret;
+
+ stmfx->irq_domain = irq_domain_add_simple(stmfx->dev->of_node,
+ STMFX_REG_IRQ_SRC_MAX, 0,
+ &stmfx_irq_ops, stmfx);
+ if (!stmfx->irq_domain) {
+ dev_err(stmfx->dev, "Failed to create IRQ domain\n");
+ return -EINVAL;
+ }
+
+ if (!of_property_read_bool(stmfx->dev->of_node, "drive-open-drain"))
+ irqoutpin |= STMFX_REG_IRQ_OUT_PIN_TYPE;
+
+ irqtrigger = irq_get_trigger_type(client->irq);
+ if ((irqtrigger & IRQ_TYPE_EDGE_RISING) ||
+ (irqtrigger & IRQ_TYPE_LEVEL_HIGH))
+ irqoutpin |= STMFX_REG_IRQ_OUT_PIN_POL;
+
+ ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin);
+ if (ret)
+ return ret;
+
+ ret = devm_request_threaded_irq(stmfx->dev, client->irq,
+ NULL, stmfx_irq_handler,
+ irqtrigger | IRQF_ONESHOT,
+ "stmfx", stmfx);
+ if (ret)
+ stmfx_irq_exit(client);
+
+ return ret;
+}
+
+static int stmfx_chip_reset(struct stmfx *stmfx)
+{
+ int ret;
+
+ ret = regmap_write(stmfx->map, STMFX_REG_SYS_CTRL,
+ STMFX_REG_SYS_CTRL_SWRST);
+ if (ret)
+ return ret;
+
+ msleep(STMFX_BOOT_TIME_MS);
+
+ return ret;
+}
+
+static int stmfx_chip_init(struct i2c_client *client)
+{
+ struct stmfx *stmfx = i2c_get_clientdata(client);
+ u32 id;
+ u8 version[2];
+ int ret;
+
+ stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd");
+ ret = PTR_ERR_OR_ZERO(stmfx->vdd);
+ if (ret == -ENODEV) {
+ stmfx->vdd = NULL;
+ } else if (ret == -EPROBE_DEFER) {
+ return ret;
+ } else if (ret) {
+ dev_err(&client->dev, "Failed to get VDD regulator: %d\n", ret);
+ return ret;
+ }
+
+ if (stmfx->vdd) {
+ ret = regulator_enable(stmfx->vdd);
+ if (ret) {
+ dev_err(&client->dev, "VDD enable failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = regmap_read(stmfx->map, STMFX_REG_CHIP_ID, &id);
+ if (ret) {
+ dev_err(&client->dev, "Error reading chip ID: %d\n", ret);
+ goto err;
+ }
+
+ /*
+ * Check that ID is the complement of the I2C address:
+ * STMFX I2C address follows the 7-bit format (MSB), that's why
+ * client->addr is shifted.
+ *
+ * STMFX_I2C_ADDR| STMFX | Linux
+ * input pin | I2C device address | I2C device address
+ *---------------------------------------------------------
+ * 0 | b: 1000 010x h:0x84 | 0x42
+ * 1 | b: 1000 011x h:0x86 | 0x43
+ */
+ if (FIELD_GET(STMFX_REG_CHIP_ID_MASK, ~id) != (client->addr << 1)) {
+ dev_err(&client->dev, "Unknown chip ID: %#x\n", id);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = regmap_bulk_read(stmfx->map, STMFX_REG_FW_VERSION_MSB,
+ version, ARRAY_SIZE(version));
+ if (ret) {
+ dev_err(&client->dev, "Error reading FW version: %d\n", ret);
+ goto err;
+ }
+
+ dev_info(&client->dev, "STMFX id: %#x, fw version: %x.%02x\n",
+ id, version[0], version[1]);
+
+ ret = stmfx_chip_reset(stmfx);
+ if (ret) {
+ dev_err(&client->dev, "Failed to reset chip: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ if (stmfx->vdd)
+ return regulator_disable(stmfx->vdd);
+
+ return ret;
+}
+
+static int stmfx_chip_exit(struct i2c_client *client)
+{
+ struct stmfx *stmfx = i2c_get_clientdata(client);
+
+ regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0);
+ regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0);
+
+ if (stmfx->vdd)
+ return regulator_disable(stmfx->vdd);
+
+ return 0;
+}
+
+static int stmfx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct stmfx *stmfx;
+ int ret;
+
+ stmfx = devm_kzalloc(dev, sizeof(*stmfx), GFP_KERNEL);
+ if (!stmfx)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, stmfx);
+
+ stmfx->dev = dev;
+
+ stmfx->map = devm_regmap_init_i2c(client, &stmfx_regmap_config);
+ if (IS_ERR(stmfx->map)) {
+ ret = PTR_ERR(stmfx->map);
+ dev_err(dev, "Failed to allocate register map: %d\n", ret);
+ return ret;
+ }
+
+ mutex_init(&stmfx->lock);
+
+ ret = stmfx_chip_init(client);
+ if (ret) {
+ if (ret == -ETIMEDOUT)
+ return -EPROBE_DEFER;
+ return ret;
+ }
+
+ if (client->irq < 0) {
+ dev_err(dev, "Failed to get IRQ: %d\n", client->irq);
+ ret = client->irq;
+ goto err_chip_exit;
+ }
+
+ ret = stmfx_irq_init(client);
+ if (ret)
+ goto err_chip_exit;
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+ stmfx_cells, ARRAY_SIZE(stmfx_cells), NULL,
+ 0, stmfx->irq_domain);
+ if (ret)
+ goto err_irq_exit;
+
+ return 0;
+
+err_irq_exit:
+ stmfx_irq_exit(client);
+err_chip_exit:
+ stmfx_chip_exit(client);
+
+ return ret;
+}
+
+static int stmfx_remove(struct i2c_client *client)
+{
+ stmfx_irq_exit(client);
+
+ return stmfx_chip_exit(client);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stmfx_suspend(struct device *dev)
+{
+ struct stmfx *stmfx = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_raw_read(stmfx->map, STMFX_REG_SYS_CTRL,
+ &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_read(stmfx->map, STMFX_REG_IRQ_OUT_PIN,
+ &stmfx->bkp_irqoutpin,
+ sizeof(stmfx->bkp_irqoutpin));
+ if (ret)
+ return ret;
+
+ if (stmfx->vdd)
+ return regulator_disable(stmfx->vdd);
+
+ return 0;
+}
+
+static int stmfx_resume(struct device *dev)
+{
+ struct stmfx *stmfx = dev_get_drvdata(dev);
+ int ret;
+
+ if (stmfx->vdd) {
+ ret = regulator_enable(stmfx->vdd);
+ if (ret) {
+ dev_err(stmfx->dev,
+ "VDD enable failed: %d\n", ret);
+ return ret;
+ }
+ }
+
+ ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL,
+ &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl));
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN,
+ &stmfx->bkp_irqoutpin,
+ sizeof(stmfx->bkp_irqoutpin));
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_SRC_EN,
+ &stmfx->irq_src, sizeof(stmfx->irq_src));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stmfx_dev_pm_ops, stmfx_suspend, stmfx_resume);
+
+static const struct of_device_id stmfx_of_match[] = {
+ { .compatible = "st,stmfx-0300", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stmfx_of_match);
+
+static struct i2c_driver stmfx_driver = {
+ .driver = {
+ .name = "stmfx-core",
+ .of_match_table = of_match_ptr(stmfx_of_match),
+ .pm = &stmfx_dev_pm_ops,
+ },
+ .probe = stmfx_probe,
+ .remove = stmfx_remove,
+};
+module_i2c_driver(stmfx_driver);
+
+MODULE_DESCRIPTION("STMFX core driver");
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
index 2b658bed47db..2f12a415b807 100644
--- a/drivers/mfd/sun6i-prcm.c
+++ b/drivers/mfd/sun6i-prcm.c
@@ -148,13 +148,12 @@ static const struct of_device_id sun6i_prcm_dt_ids[] = {
static int sun6i_prcm_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
const struct of_device_id *match;
const struct prcm_data *data;
struct resource *res;
int ret;
- match = of_match_node(sun6i_prcm_dt_ids, np);
+ match = of_match_node(sun6i_prcm_dt_ids, pdev->dev.of_node);
if (!match)
return -EINVAL;
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 0ecdffb3d967..f6922a0f8058 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -12,6 +12,7 @@
* (at your option) any later version.
*/
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/hwspinlock.h>
#include <linux/io.h>
@@ -45,6 +46,7 @@ static const struct regmap_config syscon_regmap_config = {
static struct syscon *of_syscon_register(struct device_node *np)
{
+ struct clk *clk;
struct syscon *syscon;
struct regmap *regmap;
void __iomem *base;
@@ -119,6 +121,18 @@ static struct syscon *of_syscon_register(struct device_node *np)
goto err_regmap;
}
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ /* clock is optional */
+ if (ret != -ENOENT)
+ goto err_clk;
+ } else {
+ ret = regmap_mmio_attach_clk(regmap, clk);
+ if (ret)
+ goto err_attach;
+ }
+
syscon->regmap = regmap;
syscon->np = np;
@@ -128,6 +142,11 @@ static struct syscon *of_syscon_register(struct device_node *np)
return syscon;
+err_attach:
+ if (!IS_ERR(clk))
+ clk_put(clk);
+err_clk:
+ regmap_exit(regmap);
err_regmap:
iounmap(base);
err_map:
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 43d8683266de..e9cfb147345e 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -82,8 +82,7 @@ struct t7l66xb {
static int t7l66xb_mmc_enable(struct platform_device *mmc)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+ struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
unsigned long flags;
u8 dev_ctl;
int ret;
@@ -108,8 +107,7 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc)
static int t7l66xb_mmc_disable(struct platform_device *mmc)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+ struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
unsigned long flags;
u8 dev_ctl;
@@ -128,16 +126,14 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+ struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state);
}
static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
+ struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state);
}
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index 85fab3729102..f417c6fecfe2 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -80,16 +80,14 @@ static int tc6387xb_resume(struct platform_device *dev)
static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state);
}
static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state);
}
@@ -97,8 +95,7 @@ static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state)
static int tc6387xb_mmc_enable(struct platform_device *mmc)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
clk_prepare_enable(tc6387xb->clk32k);
@@ -110,8 +107,7 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc)
static int tc6387xb_mmc_disable(struct platform_device *mmc)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
+ struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent);
clk_disable_unprepare(tc6387xb->clk32k);
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 0c9f0390e891..6943048a64c2 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -122,14 +122,13 @@ enum {
static int tc6393xb_nand_enable(struct platform_device *nand)
{
- struct platform_device *dev = to_platform_device(nand->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(nand->dev.parent);
unsigned long flags;
raw_spin_lock_irqsave(&tc6393xb->lock, flags);
/* SMD buffer on */
- dev_dbg(&dev->dev, "SMD buffer on\n");
+ dev_dbg(nand->dev.parent, "SMD buffer on\n");
tmio_iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1));
raw_spin_unlock_irqrestore(&tc6393xb->lock, flags);
@@ -312,8 +311,7 @@ static int tc6393xb_fb_disable(struct platform_device *dev)
int tc6393xb_lcd_set_power(struct platform_device *fb, bool on)
{
- struct platform_device *dev = to_platform_device(fb->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(fb->dev.parent);
u8 fer;
unsigned long flags;
@@ -334,8 +332,7 @@ EXPORT_SYMBOL(tc6393xb_lcd_set_power);
int tc6393xb_lcd_mode(struct platform_device *fb,
const struct fb_videomode *mode) {
- struct platform_device *dev = to_platform_device(fb->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(fb->dev.parent);
unsigned long flags;
raw_spin_lock_irqsave(&tc6393xb->lock, flags);
@@ -351,8 +348,7 @@ EXPORT_SYMBOL(tc6393xb_lcd_mode);
static int tc6393xb_mmc_enable(struct platform_device *mmc)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0,
tc6393xb_mmc_resources[0].start & 0xfffe);
@@ -362,8 +358,7 @@ static int tc6393xb_mmc_enable(struct platform_device *mmc)
static int tc6393xb_mmc_resume(struct platform_device *mmc)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0,
tc6393xb_mmc_resources[0].start & 0xfffe);
@@ -373,16 +368,14 @@ static int tc6393xb_mmc_resume(struct platform_device *mmc)
static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state);
}
static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state)
{
- struct platform_device *dev = to_platform_device(mmc->dev.parent);
- struct tc6393xb *tc6393xb = platform_get_drvdata(dev);
+ struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent);
tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state);
}
diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c
index 3bd75061f777..f78be039e463 100644
--- a/drivers/mfd/tps65912-spi.c
+++ b/drivers/mfd/tps65912-spi.c
@@ -27,6 +27,7 @@ static const struct of_device_id tps65912_spi_of_match_table[] = {
{ .compatible = "ti,tps65912", },
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, tps65912_spi_of_match_table);
static int tps65912_spi_probe(struct spi_device *spi)
{
diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
index 7c3c5fd5fcd0..86052c5c6069 100644
--- a/drivers/mfd/twl6040.c
+++ b/drivers/mfd/twl6040.c
@@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on)
}
}
+ /*
+ * Register access can produce errors after power-up unless we
+ * wait at least 8ms based on measurements on duovero.
+ */
+ usleep_range(10000, 12000);
+
/* Sync with the HW */
- regcache_sync(twl6040->regmap);
+ ret = regcache_sync(twl6040->regmap);
+ if (ret) {
+ dev_err(twl6040->dev, "Failed to sync with the HW: %i\n",
+ ret);
+ goto out;
+ }
/* Default PLL configuration after power up */
twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 5b3b06a0a3bf..d466e33635b0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -15,7 +15,7 @@
* Adopted from dwmac-sti.c
*/
-#include <linux/mfd/syscon.h>
+#include <linux/mfd/altera-sysmgr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_net.h>
@@ -114,7 +114,8 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
dwmac->interface = of_get_phy_mode(np);
- sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
+ sys_mgr_base_addr =
+ altr_sysmgr_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
if (IS_ERR(sys_mgr_base_addr)) {
dev_info(dev, "No sysmgr-syscon node found\n");
return PTR_ERR(sys_mgr_base_addr);
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 19d8af9a36a2..ea798548b012 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -273,6 +273,20 @@ config PINCTRL_ST
select PINCONF
select GPIOLIB_IRQCHIP
+config PINCTRL_STMFX
+ tristate "STMicroelectronics STMFX GPIO expander pinctrl driver"
+ depends on I2C
+ depends on OF || COMPILE_TEST
+ select GENERIC_PINCONF
+ select GPIOLIB_IRQCHIP
+ select MFD_STMFX
+ help
+ Driver for STMicroelectronics Multi-Function eXpander (STMFX)
+ GPIO expander.
+ This provides a GPIO interface supporting inputs and outputs,
+ and configuring push-pull, open-drain, and can also be used as
+ interrupt-controller.
+
config PINCTRL_U300
bool "U300 pin controller driver"
depends on ARCH_U300
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 62df40647e02..ac537fdbc998 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PINCTRL_LPC18XX) += pinctrl-lpc18xx.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
+obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o
obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o
diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
new file mode 100644
index 000000000000..eba872ce4a7c
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -0,0 +1,819 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander
+ *
+ * Copyright (C) 2019 STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
+ */
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stmfx.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "core.h"
+#include "pinctrl-utils.h"
+
+/* GPIOs expander */
+/* GPIO_STATE1 0x10, GPIO_STATE2 0x11, GPIO_STATE3 0x12 */
+#define STMFX_REG_GPIO_STATE STMFX_REG_GPIO_STATE1 /* R */
+/* GPIO_DIR1 0x60, GPIO_DIR2 0x61, GPIO_DIR3 0x63 */
+#define STMFX_REG_GPIO_DIR STMFX_REG_GPIO_DIR1 /* RW */
+/* GPIO_TYPE1 0x64, GPIO_TYPE2 0x65, GPIO_TYPE3 0x66 */
+#define STMFX_REG_GPIO_TYPE STMFX_REG_GPIO_TYPE1 /* RW */
+/* GPIO_PUPD1 0x68, GPIO_PUPD2 0x69, GPIO_PUPD3 0x6A */
+#define STMFX_REG_GPIO_PUPD STMFX_REG_GPIO_PUPD1 /* RW */
+/* GPO_SET1 0x6C, GPO_SET2 0x6D, GPO_SET3 0x6E */
+#define STMFX_REG_GPO_SET STMFX_REG_GPO_SET1 /* RW */
+/* GPO_CLR1 0x70, GPO_CLR2 0x71, GPO_CLR3 0x72 */
+#define STMFX_REG_GPO_CLR STMFX_REG_GPO_CLR1 /* RW */
+/* IRQ_GPI_SRC1 0x48, IRQ_GPI_SRC2 0x49, IRQ_GPI_SRC3 0x4A */
+#define STMFX_REG_IRQ_GPI_SRC STMFX_REG_IRQ_GPI_SRC1 /* RW */
+/* IRQ_GPI_EVT1 0x4C, IRQ_GPI_EVT2 0x4D, IRQ_GPI_EVT3 0x4E */
+#define STMFX_REG_IRQ_GPI_EVT STMFX_REG_IRQ_GPI_EVT1 /* RW */
+/* IRQ_GPI_TYPE1 0x50, IRQ_GPI_TYPE2 0x51, IRQ_GPI_TYPE3 0x52 */
+#define STMFX_REG_IRQ_GPI_TYPE STMFX_REG_IRQ_GPI_TYPE1 /* RW */
+/* IRQ_GPI_PENDING1 0x0C, IRQ_GPI_PENDING2 0x0D, IRQ_GPI_PENDING3 0x0E*/
+#define STMFX_REG_IRQ_GPI_PENDING STMFX_REG_IRQ_GPI_PENDING1 /* R */
+/* IRQ_GPI_ACK1 0x54, IRQ_GPI_ACK2 0x55, IRQ_GPI_ACK3 0x56 */
+#define STMFX_REG_IRQ_GPI_ACK STMFX_REG_IRQ_GPI_ACK1 /* RW */
+
+#define NR_GPIO_REGS 3
+#define NR_GPIOS_PER_REG 8
+#define get_reg(offset) ((offset) / NR_GPIOS_PER_REG)
+#define get_shift(offset) ((offset) % NR_GPIOS_PER_REG)
+#define get_mask(offset) (BIT(get_shift(offset)))
+
+/*
+ * STMFX pinctrl can have up to 24 pins if STMFX other functions are not used.
+ * Pins availability is managed thanks to gpio-ranges property.
+ */
+static const struct pinctrl_pin_desc stmfx_pins[] = {
+ PINCTRL_PIN(0, "gpio0"),
+ PINCTRL_PIN(1, "gpio1"),
+ PINCTRL_PIN(2, "gpio2"),
+ PINCTRL_PIN(3, "gpio3"),
+ PINCTRL_PIN(4, "gpio4"),
+ PINCTRL_PIN(5, "gpio5"),
+ PINCTRL_PIN(6, "gpio6"),
+ PINCTRL_PIN(7, "gpio7"),
+ PINCTRL_PIN(8, "gpio8"),
+ PINCTRL_PIN(9, "gpio9"),
+ PINCTRL_PIN(10, "gpio10"),
+ PINCTRL_PIN(11, "gpio11"),
+ PINCTRL_PIN(12, "gpio12"),
+ PINCTRL_PIN(13, "gpio13"),
+ PINCTRL_PIN(14, "gpio14"),
+ PINCTRL_PIN(15, "gpio15"),
+ PINCTRL_PIN(16, "agpio0"),
+ PINCTRL_PIN(17, "agpio1"),
+ PINCTRL_PIN(18, "agpio2"),
+ PINCTRL_PIN(19, "agpio3"),
+ PINCTRL_PIN(20, "agpio4"),
+ PINCTRL_PIN(21, "agpio5"),
+ PINCTRL_PIN(22, "agpio6"),
+ PINCTRL_PIN(23, "agpio7"),
+};
+
+struct stmfx_pinctrl {
+ struct device *dev;
+ struct stmfx *stmfx;
+ struct pinctrl_dev *pctl_dev;
+ struct pinctrl_desc pctl_desc;
+ struct gpio_chip gpio_chip;
+ struct irq_chip irq_chip;
+ struct mutex lock; /* IRQ bus lock */
+ unsigned long gpio_valid_mask;
+ /* Cache of IRQ_GPI_* registers for bus_lock */
+ u8 irq_gpi_src[NR_GPIO_REGS];
+ u8 irq_gpi_type[NR_GPIO_REGS];
+ u8 irq_gpi_evt[NR_GPIO_REGS];
+ u8 irq_toggle_edge[NR_GPIO_REGS];
+#ifdef CONFIG_PM
+ /* Backup of GPIO_* registers for suspend/resume */
+ u8 bkp_gpio_state[NR_GPIO_REGS];
+ u8 bkp_gpio_dir[NR_GPIO_REGS];
+ u8 bkp_gpio_type[NR_GPIO_REGS];
+ u8 bkp_gpio_pupd[NR_GPIO_REGS];
+#endif
+};
+
+static int stmfx_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gc);
+ u32 reg = STMFX_REG_GPIO_STATE + get_reg(offset);
+ u32 mask = get_mask(offset);
+ u32 value;
+ int ret;
+
+ ret = regmap_read(pctl->stmfx->map, reg, &value);
+
+ return ret ? ret : !!(value & mask);
+}
+
+static void stmfx_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gc);
+ u32 reg = value ? STMFX_REG_GPO_SET : STMFX_REG_GPO_CLR;
+ u32 mask = get_mask(offset);
+
+ regmap_write_bits(pctl->stmfx->map, reg + get_reg(offset),
+ mask, mask);
+}
+
+static int stmfx_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gc);
+ u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
+ u32 mask = get_mask(offset);
+ u32 val;
+ int ret;
+
+ ret = regmap_read(pctl->stmfx->map, reg, &val);
+ /*
+ * On stmfx, gpio pins direction is (0)input, (1)output.
+ * .get_direction returns 0=out, 1=in
+ */
+
+ return ret ? ret : !(val & mask);
+}
+
+static int stmfx_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
+{
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gc);
+ u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
+ u32 mask = get_mask(offset);
+
+ return regmap_write_bits(pctl->stmfx->map, reg, mask, 0);
+}
+
+static int stmfx_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gc);
+ u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
+ u32 mask = get_mask(offset);
+
+ stmfx_gpio_set(gc, offset, value);
+
+ return regmap_write_bits(pctl->stmfx->map, reg, mask, mask);
+}
+
+static int stmfx_pinconf_get_pupd(struct stmfx_pinctrl *pctl,
+ unsigned int offset)
+{
+ u32 reg = STMFX_REG_GPIO_PUPD + get_reg(offset);
+ u32 pupd, mask = get_mask(offset);
+ int ret;
+
+ ret = regmap_read(pctl->stmfx->map, reg, &pupd);
+ if (ret)
+ return ret;
+
+ return !!(pupd & mask);
+}
+
+static int stmfx_pinconf_set_pupd(struct stmfx_pinctrl *pctl,
+ unsigned int offset, u32 pupd)
+{
+ u32 reg = STMFX_REG_GPIO_PUPD + get_reg(offset);
+ u32 mask = get_mask(offset);
+
+ return regmap_write_bits(pctl->stmfx->map, reg, mask, pupd ? mask : 0);
+}
+
+static int stmfx_pinconf_get_type(struct stmfx_pinctrl *pctl,
+ unsigned int offset)
+{
+ u32 reg = STMFX_REG_GPIO_TYPE + get_reg(offset);
+ u32 type, mask = get_mask(offset);
+ int ret;
+
+ ret = regmap_read(pctl->stmfx->map, reg, &type);
+ if (ret)
+ return ret;
+
+ return !!(type & mask);
+}
+
+static int stmfx_pinconf_set_type(struct stmfx_pinctrl *pctl,
+ unsigned int offset, u32 type)
+{
+ u32 reg = STMFX_REG_GPIO_TYPE + get_reg(offset);
+ u32 mask = get_mask(offset);
+
+ return regmap_write_bits(pctl->stmfx->map, reg, mask, type ? mask : 0);
+}
+
+static int stmfx_pinconf_get(struct pinctrl_dev *pctldev,
+ unsigned int pin, unsigned long *config)
+{
+ struct stmfx_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ u32 param = pinconf_to_config_param(*config);
+ struct pinctrl_gpio_range *range;
+ u32 arg = 0;
+ int ret, dir, type, pupd;
+
+ range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
+ if (!range)
+ return -EINVAL;
+
+ dir = stmfx_gpio_get_direction(&pctl->gpio_chip, pin);
+ if (dir < 0)
+ return dir;
+ type = stmfx_pinconf_get_type(pctl, pin);
+ if (type < 0)
+ return type;
+ pupd = stmfx_pinconf_get_pupd(pctl, pin);
+ if (pupd < 0)
+ return pupd;
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ if ((!dir && (!type || !pupd)) || (dir && !type))
+ arg = 1;
+ break;
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ if (dir && type && !pupd)
+ arg = 1;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ if (type && pupd)
+ arg = 1;
+ break;
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ if ((!dir && type) || (dir && !type))
+ arg = 1;
+ break;
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ if ((!dir && !type) || (dir && type))
+ arg = 1;
+ break;
+ case PIN_CONFIG_OUTPUT:
+ if (dir)
+ return -EINVAL;
+
+ ret = stmfx_gpio_get(&pctl->gpio_chip, pin);
+ if (ret < 0)
+ return ret;
+
+ arg = ret;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+
+ return 0;
+}
+
+static int stmfx_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *configs, unsigned int num_configs)
+{
+ struct stmfx_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct pinctrl_gpio_range *range;
+ enum pin_config_param param;
+ u32 arg;
+ int dir, i, ret;
+
+ range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
+ if (!range) {
+ dev_err(pctldev->dev, "pin %d is not available\n", pin);
+ return -EINVAL;
+ }
+
+ dir = stmfx_gpio_get_direction(&pctl->gpio_chip, pin);
+ if (dir < 0)
+ return dir;
+
+ for (i = 0; i < num_configs; i++) {
+ param = pinconf_to_config_param(configs[i]);
+ arg = pinconf_to_config_argument(configs[i]);
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT:
+ case PIN_CONFIG_BIAS_DISABLE:
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ ret = stmfx_pinconf_set_pupd(pctl, pin, 0);
+ if (ret)
+ return ret;
+ break;
+ case PIN_CONFIG_BIAS_PULL_UP:
+ ret = stmfx_pinconf_set_pupd(pctl, pin, 1);
+ if (ret)
+ return ret;
+ break;
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ if (!dir)
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
+ else
+ ret = stmfx_pinconf_set_type(pctl, pin, 0);
+ if (ret)
+ return ret;
+ break;
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ if (!dir)
+ ret = stmfx_pinconf_set_type(pctl, pin, 0);
+ else
+ ret = stmfx_pinconf_set_type(pctl, pin, 1);
+ if (ret)
+ return ret;
+ break;
+ case PIN_CONFIG_OUTPUT:
+ ret = stmfx_gpio_direction_output(&pctl->gpio_chip,
+ pin, arg);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -ENOTSUPP;
+ }
+ }
+
+ return 0;
+}
+
+static void stmfx_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+ struct seq_file *s, unsigned int offset)
+{
+ struct stmfx_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ struct pinctrl_gpio_range *range;
+ int dir, type, pupd, val;
+
+ range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, offset);
+ if (!range)
+ return;
+
+ dir = stmfx_gpio_get_direction(&pctl->gpio_chip, offset);
+ if (dir < 0)
+ return;
+ type = stmfx_pinconf_get_type(pctl, offset);
+ if (type < 0)
+ return;
+ pupd = stmfx_pinconf_get_pupd(pctl, offset);
+ if (pupd < 0)
+ return;
+ val = stmfx_gpio_get(&pctl->gpio_chip, offset);
+ if (val < 0)
+ return;
+
+ if (!dir) {
+ seq_printf(s, "output %s ", val ? "high" : "low");
+ if (type)
+ seq_printf(s, "open drain %s internal pull-up ",
+ pupd ? "with" : "without");
+ else
+ seq_puts(s, "push pull no pull ");
+ } else {
+ seq_printf(s, "input %s ", val ? "high" : "low");
+ if (type)
+ seq_printf(s, "with internal pull-%s ",
+ pupd ? "up" : "down");
+ else
+ seq_printf(s, "%s ", pupd ? "floating" : "analog");
+ }
+}
+
+static const struct pinconf_ops stmfx_pinconf_ops = {
+ .pin_config_get = stmfx_pinconf_get,
+ .pin_config_set = stmfx_pinconf_set,
+ .pin_config_dbg_show = stmfx_pinconf_dbg_show,
+};
+
+static int stmfx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ return 0;
+}
+
+static const char *stmfx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return NULL;
+}
+
+static int stmfx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const unsigned int **pins,
+ unsigned int *num_pins)
+{
+ return -ENOTSUPP;
+}
+
+static const struct pinctrl_ops stmfx_pinctrl_ops = {
+ .get_groups_count = stmfx_pinctrl_get_groups_count,
+ .get_group_name = stmfx_pinctrl_get_group_name,
+ .get_group_pins = stmfx_pinctrl_get_group_pins,
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+ .dt_free_map = pinctrl_utils_free_map,
+};
+
+static void stmfx_pinctrl_irq_mask(struct irq_data *data)
+{
+ struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gpio_chip);
+ u32 reg = get_reg(data->hwirq);
+ u32 mask = get_mask(data->hwirq);
+
+ pctl->irq_gpi_src[reg] &= ~mask;
+}
+
+static void stmfx_pinctrl_irq_unmask(struct irq_data *data)
+{
+ struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gpio_chip);
+ u32 reg = get_reg(data->hwirq);
+ u32 mask = get_mask(data->hwirq);
+
+ pctl->irq_gpi_src[reg] |= mask;
+}
+
+static int stmfx_pinctrl_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gpio_chip);
+ u32 reg = get_reg(data->hwirq);
+ u32 mask = get_mask(data->hwirq);
+
+ if (type == IRQ_TYPE_NONE)
+ return -EINVAL;
+
+ if (type & IRQ_TYPE_EDGE_BOTH) {
+ pctl->irq_gpi_evt[reg] |= mask;
+ irq_set_handler_locked(data, handle_edge_irq);
+ } else {
+ pctl->irq_gpi_evt[reg] &= ~mask;
+ irq_set_handler_locked(data, handle_level_irq);
+ }
+
+ if ((type & IRQ_TYPE_EDGE_RISING) || (type & IRQ_TYPE_LEVEL_HIGH))
+ pctl->irq_gpi_type[reg] |= mask;
+ else
+ pctl->irq_gpi_type[reg] &= ~mask;
+
+ /*
+ * In case of (type & IRQ_TYPE_EDGE_BOTH), we need to know current
+ * GPIO value to set the right edge trigger. But in atomic context
+ * here we can't access registers over I2C. That's why (type &
+ * IRQ_TYPE_EDGE_BOTH) will be managed in .irq_sync_unlock.
+ */
+
+ if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+ pctl->irq_toggle_edge[reg] |= mask;
+ else
+ pctl->irq_toggle_edge[reg] &= mask;
+
+ return 0;
+}
+
+static void stmfx_pinctrl_irq_bus_lock(struct irq_data *data)
+{
+ struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gpio_chip);
+
+ mutex_lock(&pctl->lock);
+}
+
+static void stmfx_pinctrl_irq_bus_sync_unlock(struct irq_data *data)
+{
+ struct gpio_chip *gpio_chip = irq_data_get_irq_chip_data(data);
+ struct stmfx_pinctrl *pctl = gpiochip_get_data(gpio_chip);
+ u32 reg = get_reg(data->hwirq);
+ u32 mask = get_mask(data->hwirq);
+
+ /*
+ * In case of IRQ_TYPE_EDGE_BOTH), read the current GPIO value
+ * (this couldn't be done in .irq_set_type because of atomic context)
+ * to set the right irq trigger type.
+ */
+ if (pctl->irq_toggle_edge[reg] & mask) {
+ if (stmfx_gpio_get(gpio_chip, data->hwirq))
+ pctl->irq_gpi_type[reg] &= ~mask;
+ else
+ pctl->irq_gpi_type[reg] |= mask;
+ }
+
+ regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_EVT,
+ pctl->irq_gpi_evt, NR_GPIO_REGS);
+ regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_TYPE,
+ pctl->irq_gpi_type, NR_GPIO_REGS);
+ regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_SRC,
+ pctl->irq_gpi_src, NR_GPIO_REGS);
+
+ mutex_unlock(&pctl->lock);
+}
+
+static void stmfx_pinctrl_irq_toggle_trigger(struct stmfx_pinctrl *pctl,
+ unsigned int offset)
+{
+ u32 reg = get_reg(offset);
+ u32 mask = get_mask(offset);
+ int val;
+
+ if (!(pctl->irq_toggle_edge[reg] & mask))
+ return;
+
+ val = stmfx_gpio_get(&pctl->gpio_chip, offset);
+ if (val < 0)
+ return;
+
+ if (val) {
+ pctl->irq_gpi_type[reg] &= mask;
+ regmap_write_bits(pctl->stmfx->map,
+ STMFX_REG_IRQ_GPI_TYPE + reg,
+ mask, 0);
+
+ } else {
+ pctl->irq_gpi_type[reg] |= mask;
+ regmap_write_bits(pctl->stmfx->map,
+ STMFX_REG_IRQ_GPI_TYPE + reg,
+ mask, mask);
+ }
+}
+
+static irqreturn_t stmfx_pinctrl_irq_thread_fn(int irq, void *dev_id)
+{
+ struct stmfx_pinctrl *pctl = (struct stmfx_pinctrl *)dev_id;
+ struct gpio_chip *gc = &pctl->gpio_chip;
+ u8 pending[NR_GPIO_REGS];
+ u8 src[NR_GPIO_REGS] = {0, 0, 0};
+ unsigned long n, status;
+ int ret;
+
+ ret = regmap_bulk_read(pctl->stmfx->map, STMFX_REG_IRQ_GPI_PENDING,
+ &pending, NR_GPIO_REGS);
+ if (ret)
+ return IRQ_NONE;
+
+ regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_SRC,
+ src, NR_GPIO_REGS);
+
+ status = *(unsigned long *)pending;
+ for_each_set_bit(n, &status, gc->ngpio) {
+ handle_nested_irq(irq_find_mapping(gc->irq.domain, n));
+ stmfx_pinctrl_irq_toggle_trigger(pctl, n);
+ }
+
+ regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_SRC,
+ pctl->irq_gpi_src, NR_GPIO_REGS);
+
+ return IRQ_HANDLED;
+}
+
+static int stmfx_pinctrl_gpio_function_enable(struct stmfx_pinctrl *pctl)
+{
+ struct pinctrl_gpio_range *gpio_range;
+ struct pinctrl_dev *pctl_dev = pctl->pctl_dev;
+ u32 func = STMFX_FUNC_GPIO;
+
+ pctl->gpio_valid_mask = GENMASK(15, 0);
+
+ gpio_range = pinctrl_find_gpio_range_from_pin(pctl_dev, 16);
+ if (gpio_range) {
+ func |= STMFX_FUNC_ALTGPIO_LOW;
+ pctl->gpio_valid_mask |= GENMASK(19, 16);
+ }
+
+ gpio_range = pinctrl_find_gpio_range_from_pin(pctl_dev, 20);
+ if (gpio_range) {
+ func |= STMFX_FUNC_ALTGPIO_HIGH;
+ pctl->gpio_valid_mask |= GENMASK(23, 20);
+ }
+
+ return stmfx_function_enable(pctl->stmfx, func);
+}
+
+static int stmfx_pinctrl_probe(struct platform_device *pdev)
+{
+ struct stmfx *stmfx = dev_get_drvdata(pdev->dev.parent);
+ struct device_node *np = pdev->dev.of_node;
+ struct stmfx_pinctrl *pctl;
+ u32 n;
+ int irq, ret;
+
+ pctl = devm_kzalloc(stmfx->dev, sizeof(*pctl), GFP_KERNEL);
+ if (!pctl)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pctl);
+
+ pctl->dev = &pdev->dev;
+ pctl->stmfx = stmfx;
+
+ if (!of_find_property(np, "gpio-ranges", NULL)) {
+ dev_err(pctl->dev, "missing required gpio-ranges property\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(pctl->dev, "failed to get irq\n");
+ return -ENXIO;
+ }
+
+ mutex_init(&pctl->lock);
+
+ /* Register pin controller */
+ pctl->pctl_desc.name = "stmfx-pinctrl";
+ pctl->pctl_desc.pctlops = &stmfx_pinctrl_ops;
+ pctl->pctl_desc.confops = &stmfx_pinconf_ops;
+ pctl->pctl_desc.pins = stmfx_pins;
+ pctl->pctl_desc.npins = ARRAY_SIZE(stmfx_pins);
+ pctl->pctl_desc.owner = THIS_MODULE;
+
+ ret = devm_pinctrl_register_and_init(pctl->dev, &pctl->pctl_desc,
+ pctl, &pctl->pctl_dev);
+ if (ret) {
+ dev_err(pctl->dev, "pinctrl registration failed\n");
+ return ret;
+ }
+
+ ret = pinctrl_enable(pctl->pctl_dev);
+ if (ret) {
+ dev_err(pctl->dev, "pinctrl enable failed\n");
+ return ret;
+ }
+
+ /* Register gpio controller */
+ pctl->gpio_chip.label = "stmfx-gpio";
+ pctl->gpio_chip.parent = pctl->dev;
+ pctl->gpio_chip.get_direction = stmfx_gpio_get_direction;
+ pctl->gpio_chip.direction_input = stmfx_gpio_direction_input;
+ pctl->gpio_chip.direction_output = stmfx_gpio_direction_output;
+ pctl->gpio_chip.get = stmfx_gpio_get;
+ pctl->gpio_chip.set = stmfx_gpio_set;
+ pctl->gpio_chip.set_config = gpiochip_generic_config;
+ pctl->gpio_chip.base = -1;
+ pctl->gpio_chip.ngpio = pctl->pctl_desc.npins;
+ pctl->gpio_chip.can_sleep = true;
+ pctl->gpio_chip.of_node = np;
+ pctl->gpio_chip.need_valid_mask = true;
+
+ ret = devm_gpiochip_add_data(pctl->dev, &pctl->gpio_chip, pctl);
+ if (ret) {
+ dev_err(pctl->dev, "gpio_chip registration failed\n");
+ return ret;
+ }
+
+ ret = stmfx_pinctrl_gpio_function_enable(pctl);
+ if (ret)
+ return ret;
+
+ pctl->irq_chip.name = dev_name(pctl->dev);
+ pctl->irq_chip.irq_mask = stmfx_pinctrl_irq_mask;
+ pctl->irq_chip.irq_unmask = stmfx_pinctrl_irq_unmask;
+ pctl->irq_chip.irq_set_type = stmfx_pinctrl_irq_set_type;
+ pctl->irq_chip.irq_bus_lock = stmfx_pinctrl_irq_bus_lock;
+ pctl->irq_chip.irq_bus_sync_unlock = stmfx_pinctrl_irq_bus_sync_unlock;
+ for_each_clear_bit(n, &pctl->gpio_valid_mask, pctl->gpio_chip.ngpio)
+ clear_bit(n, pctl->gpio_chip.valid_mask);
+
+ ret = gpiochip_irqchip_add_nested(&pctl->gpio_chip, &pctl->irq_chip,
+ 0, handle_bad_irq, IRQ_TYPE_NONE);
+ if (ret) {
+ dev_err(pctl->dev, "cannot add irqchip to gpiochip\n");
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(pctl->dev, irq, NULL,
+ stmfx_pinctrl_irq_thread_fn,
+ IRQF_ONESHOT,
+ pctl->irq_chip.name, pctl);
+ if (ret) {
+ dev_err(pctl->dev, "cannot request irq%d\n", irq);
+ return ret;
+ }
+
+ gpiochip_set_nested_irqchip(&pctl->gpio_chip, &pctl->irq_chip, irq);
+
+ dev_info(pctl->dev,
+ "%ld GPIOs available\n", hweight_long(pctl->gpio_valid_mask));
+
+ return 0;
+}
+
+static int stmfx_pinctrl_remove(struct platform_device *pdev)
+{
+ struct stmfx *stmfx = dev_get_platdata(&pdev->dev);
+
+ return stmfx_function_disable(stmfx,
+ STMFX_FUNC_GPIO |
+ STMFX_FUNC_ALTGPIO_LOW |
+ STMFX_FUNC_ALTGPIO_HIGH);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stmfx_pinctrl_backup_regs(struct stmfx_pinctrl *pctl)
+{
+ int ret;
+
+ ret = regmap_bulk_read(pctl->stmfx->map, STMFX_REG_GPIO_STATE,
+ &pctl->bkp_gpio_state, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_read(pctl->stmfx->map, STMFX_REG_GPIO_DIR,
+ &pctl->bkp_gpio_dir, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_read(pctl->stmfx->map, STMFX_REG_GPIO_TYPE,
+ &pctl->bkp_gpio_type, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_read(pctl->stmfx->map, STMFX_REG_GPIO_PUPD,
+ &pctl->bkp_gpio_pupd, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int stmfx_pinctrl_restore_regs(struct stmfx_pinctrl *pctl)
+{
+ int ret;
+
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_GPIO_DIR,
+ pctl->bkp_gpio_dir, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_GPIO_TYPE,
+ pctl->bkp_gpio_type, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_GPIO_PUPD,
+ pctl->bkp_gpio_pupd, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_GPO_SET,
+ pctl->bkp_gpio_state, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_EVT,
+ pctl->irq_gpi_evt, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_TYPE,
+ pctl->irq_gpi_type, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+ ret = regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_SRC,
+ pctl->irq_gpi_src, NR_GPIO_REGS);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int stmfx_pinctrl_suspend(struct device *dev)
+{
+ struct stmfx_pinctrl *pctl = dev_get_drvdata(dev);
+ int ret;
+
+ ret = stmfx_pinctrl_backup_regs(pctl);
+ if (ret) {
+ dev_err(pctl->dev, "registers backup failure\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int stmfx_pinctrl_resume(struct device *dev)
+{
+ struct stmfx_pinctrl *pctl = dev_get_drvdata(dev);
+ int ret;
+
+ ret = stmfx_pinctrl_restore_regs(pctl);
+ if (ret) {
+ dev_err(pctl->dev, "registers restoration failure\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stmfx_pinctrl_dev_pm_ops,
+ stmfx_pinctrl_suspend, stmfx_pinctrl_resume);
+
+static const struct of_device_id stmfx_pinctrl_of_match[] = {
+ { .compatible = "st,stmfx-0300-pinctrl", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stmfx_pinctrl_of_match);
+
+static struct platform_driver stmfx_pinctrl_driver = {
+ .driver = {
+ .name = "stmfx-pinctrl",
+ .of_match_table = stmfx_pinctrl_of_match,
+ .pm = &stmfx_pinctrl_dev_pm_ops,
+ },
+ .probe = stmfx_pinctrl_probe,
+ .remove = stmfx_pinctrl_remove,
+};
+module_platform_driver(stmfx_pinctrl_driver);
+
+MODULE_DESCRIPTION("STMFX pinctrl/GPIO driver");
+MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 171475862ede..3d2325197a68 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -429,6 +429,12 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev)
else
ec_dev->mkbp_event_supported = 1;
+ /* Probe if host sleep v1 is supported for S0ix failure detection. */
+ ret = cros_ec_get_host_command_version_mask(ec_dev,
+ EC_CMD_HOST_SLEEP_EVENT,
+ &ver_mask);
+ ec_dev->host_sleep_v1 = (ret >= 0 && (ver_mask & EC_VER_MASK(1)));
+
/*
* Get host event wake mask, assume all events are wake events
* if unavailable.
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index e901b9879e7e..0230c96fa94d 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -499,6 +499,13 @@ config CHARGER_DETECTOR_MAX14656
Revision 1.2 and can be found e.g. in Kindle 4/5th generation
readers and certain LG devices.
+config CHARGER_MAX77650
+ tristate "Maxim MAX77650 battery charger driver"
+ depends on MFD_MAX77650
+ help
+ Say Y to enable support for the battery charger control of MAX77650
+ PMICs.
+
config CHARGER_MAX77693
tristate "Maxim MAX77693 battery charger driver"
depends on MFD_MAX77693
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index b731c2a9b695..b73eb8c5c1a9 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
obj-$(CONFIG_CHARGER_LTC3651) += ltc3651-charger.o
obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o
+obj-$(CONFIG_CHARGER_MAX77650) += max77650-charger.o
obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o
obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
diff --git a/drivers/power/supply/max77650-charger.c b/drivers/power/supply/max77650-charger.c
new file mode 100644
index 000000000000..e34714cb05ec
--- /dev/null
+++ b/drivers/power/supply/max77650-charger.c
@@ -0,0 +1,368 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Battery charger driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MAX77650_CHARGER_ENABLED BIT(0)
+#define MAX77650_CHARGER_DISABLED 0x00
+#define MAX77650_CHARGER_CHG_EN_MASK BIT(0)
+
+#define MAX77650_CHG_DETAILS_MASK GENMASK(7, 4)
+#define MAX77650_CHG_DETAILS_BITS(_reg) \
+ (((_reg) & MAX77650_CHG_DETAILS_MASK) >> 4)
+
+/* Charger is OFF. */
+#define MAX77650_CHG_OFF 0x00
+/* Charger is in prequalification mode. */
+#define MAX77650_CHG_PREQ 0x01
+/* Charger is in fast-charge constant current mode. */
+#define MAX77650_CHG_ON_CURR 0x02
+/* Charger is in JEITA modified fast-charge constant-current mode. */
+#define MAX77650_CHG_ON_CURR_JEITA 0x03
+/* Charger is in fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT 0x04
+/* Charger is in JEITA modified fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT_JEITA 0x05
+/* Charger is in top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF 0x06
+/* Charger is in JEITA modified top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF_JEITA 0x07
+/* Charger is done. */
+#define MAX77650_CHG_DONE 0x08
+/* Charger is JEITA modified done. */
+#define MAX77650_CHG_DONE_JEITA 0x09
+/* Charger is suspended due to a prequalification timer fault. */
+#define MAX77650_CHG_SUSP_PREQ_TIM_FAULT 0x0a
+/* Charger is suspended due to a fast-charge timer fault. */
+#define MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT 0x0b
+/* Charger is suspended due to a battery temperature fault. */
+#define MAX77650_CHG_SUSP_BATT_TEMP_FAULT 0x0c
+
+#define MAX77650_CHGIN_DETAILS_MASK GENMASK(3, 2)
+#define MAX77650_CHGIN_DETAILS_BITS(_reg) \
+ (((_reg) & MAX77650_CHGIN_DETAILS_MASK) >> 2)
+
+#define MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT 0x00
+#define MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT 0x01
+#define MAX77650_CHGIN_OKAY 0x11
+
+#define MAX77650_CHARGER_CHG_MASK BIT(1)
+#define MAX77650_CHARGER_CHG_CHARGING(_reg) \
+ (((_reg) & MAX77650_CHARGER_CHG_MASK) > 1)
+
+#define MAX77650_CHARGER_VCHGIN_MIN_MASK 0xc0
+#define MAX77650_CHARGER_VCHGIN_MIN_SHIFT(_val) ((_val) << 5)
+
+#define MAX77650_CHARGER_ICHGIN_LIM_MASK 0x1c
+#define MAX77650_CHARGER_ICHGIN_LIM_SHIFT(_val) ((_val) << 2)
+
+struct max77650_charger_data {
+ struct regmap *map;
+ struct device *dev;
+};
+
+static enum power_supply_property max77650_charger_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CHARGE_TYPE
+};
+
+static const unsigned int max77650_charger_vchgin_min_table[] = {
+ 4000000, 4100000, 4200000, 4300000, 4400000, 4500000, 4600000, 4700000
+};
+
+static const unsigned int max77650_charger_ichgin_lim_table[] = {
+ 95000, 190000, 285000, 380000, 475000
+};
+
+static int max77650_charger_set_vchgin_min(struct max77650_charger_data *chg,
+ unsigned int val)
+{
+ int i, rv;
+
+ for (i = 0; i < ARRAY_SIZE(max77650_charger_vchgin_min_table); i++) {
+ if (val == max77650_charger_vchgin_min_table[i]) {
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_VCHGIN_MIN_MASK,
+ MAX77650_CHARGER_VCHGIN_MIN_SHIFT(i));
+ if (rv)
+ return rv;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int max77650_charger_set_ichgin_lim(struct max77650_charger_data *chg,
+ unsigned int val)
+{
+ int i, rv;
+
+ for (i = 0; i < ARRAY_SIZE(max77650_charger_ichgin_lim_table); i++) {
+ if (val == max77650_charger_ichgin_lim_table[i]) {
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_ICHGIN_LIM_MASK,
+ MAX77650_CHARGER_ICHGIN_LIM_SHIFT(i));
+ if (rv)
+ return rv;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int max77650_charger_enable(struct max77650_charger_data *chg)
+{
+ int rv;
+
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_CHG_EN_MASK,
+ MAX77650_CHARGER_ENABLED);
+ if (rv)
+ dev_err(chg->dev, "unable to enable the charger: %d\n", rv);
+
+ return rv;
+}
+
+static int max77650_charger_disable(struct max77650_charger_data *chg)
+{
+ int rv;
+
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_CHG_EN_MASK,
+ MAX77650_CHARGER_DISABLED);
+ if (rv)
+ dev_err(chg->dev, "unable to disable the charger: %d\n", rv);
+
+ return rv;
+}
+
+static irqreturn_t max77650_charger_check_status(int irq, void *data)
+{
+ struct max77650_charger_data *chg = data;
+ int rv, reg;
+
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv) {
+ dev_err(chg->dev,
+ "unable to read the charger status: %d\n", rv);
+ return IRQ_HANDLED;
+ }
+
+ switch (MAX77650_CHGIN_DETAILS_BITS(reg)) {
+ case MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT:
+ dev_err(chg->dev, "undervoltage lockout detected, disabling charger\n");
+ max77650_charger_disable(chg);
+ break;
+ case MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT:
+ dev_err(chg->dev, "overvoltage lockout detected, disabling charger\n");
+ max77650_charger_disable(chg);
+ break;
+ case MAX77650_CHGIN_OKAY:
+ max77650_charger_enable(chg);
+ break;
+ default:
+ /* May be 0x10 - debouncing */
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int max77650_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max77650_charger_data *chg = power_supply_get_drvdata(psy);
+ int rv, reg;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv)
+ return rv;
+
+ if (MAX77650_CHARGER_CHG_CHARGING(reg)) {
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ }
+
+ switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+ case MAX77650_CHG_OFF:
+ case MAX77650_CHG_SUSP_PREQ_TIM_FAULT:
+ case MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT:
+ case MAX77650_CHG_SUSP_BATT_TEMP_FAULT:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case MAX77650_CHG_PREQ:
+ case MAX77650_CHG_ON_CURR:
+ case MAX77650_CHG_ON_CURR_JEITA:
+ case MAX77650_CHG_ON_VOLT:
+ case MAX77650_CHG_ON_VOLT_JEITA:
+ case MAX77650_CHG_ON_TOPOFF:
+ case MAX77650_CHG_ON_TOPOFF_JEITA:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case MAX77650_CHG_DONE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv)
+ return rv;
+
+ val->intval = MAX77650_CHARGER_CHG_CHARGING(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv)
+ return rv;
+
+ if (!MAX77650_CHARGER_CHG_CHARGING(reg)) {
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+ case MAX77650_CHG_PREQ:
+ case MAX77650_CHG_ON_CURR:
+ case MAX77650_CHG_ON_CURR_JEITA:
+ case MAX77650_CHG_ON_VOLT:
+ case MAX77650_CHG_ON_VOLT_JEITA:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case MAX77650_CHG_ON_TOPOFF:
+ case MAX77650_CHG_ON_TOPOFF_JEITA:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc max77650_battery_desc = {
+ .name = "max77650",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .get_property = max77650_charger_get_property,
+ .properties = max77650_charger_properties,
+ .num_properties = ARRAY_SIZE(max77650_charger_properties),
+};
+
+static int max77650_charger_probe(struct platform_device *pdev)
+{
+ struct power_supply_config pscfg = {};
+ struct max77650_charger_data *chg;
+ struct power_supply *battery;
+ struct device *dev, *parent;
+ int rv, chg_irq, chgin_irq;
+ unsigned int prop;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+
+ chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, chg);
+
+ chg->map = dev_get_regmap(parent, NULL);
+ if (!chg->map)
+ return -ENODEV;
+
+ chg->dev = dev;
+
+ pscfg.of_node = dev->of_node;
+ pscfg.drv_data = chg;
+
+ chg_irq = platform_get_irq_byname(pdev, "CHG");
+ if (chg_irq < 0)
+ return chg_irq;
+
+ chgin_irq = platform_get_irq_byname(pdev, "CHGIN");
+ if (chgin_irq < 0)
+ return chgin_irq;
+
+ rv = devm_request_any_context_irq(dev, chg_irq,
+ max77650_charger_check_status,
+ IRQF_ONESHOT, "chg", chg);
+ if (rv < 0)
+ return rv;
+
+ rv = devm_request_any_context_irq(dev, chgin_irq,
+ max77650_charger_check_status,
+ IRQF_ONESHOT, "chgin", chg);
+ if (rv < 0)
+ return rv;
+
+ battery = devm_power_supply_register(dev,
+ &max77650_battery_desc, &pscfg);
+ if (IS_ERR(battery))
+ return PTR_ERR(battery);
+
+ rv = of_property_read_u32(dev->of_node,
+ "input-voltage-min-microvolt", &prop);
+ if (rv == 0) {
+ rv = max77650_charger_set_vchgin_min(chg, prop);
+ if (rv)
+ return rv;
+ }
+
+ rv = of_property_read_u32(dev->of_node,
+ "input-current-limit-microamp", &prop);
+ if (rv == 0) {
+ rv = max77650_charger_set_ichgin_lim(chg, prop);
+ if (rv)
+ return rv;
+ }
+
+ return max77650_charger_enable(chg);
+}
+
+static int max77650_charger_remove(struct platform_device *pdev)
+{
+ struct max77650_charger_data *chg = platform_get_drvdata(pdev);
+
+ return max77650_charger_disable(chg);
+}
+
+static struct platform_driver max77650_charger_driver = {
+ .driver = {
+ .name = "max77650-charger",
+ },
+ .probe = max77650_charger_probe,
+ .remove = max77650_charger_remove,
+};
+module_platform_driver(max77650_charger_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 charger driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/altera-sysmgr.h b/include/linux/mfd/altera-sysmgr.h
new file mode 100644
index 000000000000..b1ef11a83872
--- /dev/null
+++ b/include/linux/mfd/altera-sysmgr.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 Intel Corporation
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2012 Linaro Ltd.
+ */
+
+#ifndef __LINUX_MFD_ALTERA_SYSMGR_H__
+#define __LINUX_MFD_ALTERA_SYSMGR_H__
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/firmware/intel/stratix10-smc.h>
+
+struct device_node;
+
+#ifdef CONFIG_MFD_ALTERA_SYSMGR
+struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+ const char *property);
+#else
+static inline struct regmap *
+altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np,
+ const char *property)
+{
+ return ERR_PTR(-ENOTSUPP);
+}
+#endif
+
+#endif /* __LINUX_MFD_ALTERA_SYSMGR_H__ */
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 8f2a8918bfa3..cfa78bb4990f 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -23,7 +23,10 @@
#include <linux/mutex.h>
#define CROS_EC_DEV_NAME "cros_ec"
+#define CROS_EC_DEV_FP_NAME "cros_fp"
#define CROS_EC_DEV_PD_NAME "cros_pd"
+#define CROS_EC_DEV_TP_NAME "cros_tp"
+#define CROS_EC_DEV_ISH_NAME "cros_ish"
/*
* The EC is unresponsive for a time after a reboot command. Add a
@@ -120,6 +123,7 @@ struct cros_ec_command {
* @pkt_xfer: Send packet to EC and get response.
* @lock: One transaction at a time.
* @mkbp_event_supported: True if this EC supports the MKBP event protocol.
+ * @host_sleep_v1: True if this EC supports the sleep v1 command.
* @event_notifier: Interrupt event notifier for transport devices.
* @event_data: Raw payload transferred with the MKBP event.
* @event_size: Size in bytes of the event data.
@@ -153,6 +157,7 @@ struct cros_ec_device {
struct cros_ec_command *msg);
struct mutex lock;
bool mkbp_event_supported;
+ bool host_sleep_v1;
struct blocking_notifier_head event_notifier;
struct ec_response_get_next_event_v1 event_data;
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h
index fc91082d4c35..dcec96f01879 100644
--- a/include/linux/mfd/cros_ec_commands.h
+++ b/include/linux/mfd/cros_ec_commands.h
@@ -840,7 +840,7 @@ enum ec_feature_code {
* (Common Smart Battery System Interface Specification)
*/
EC_FEATURE_SMART_BATTERY = 18,
- /* EC can dectect when the host hangs. */
+ /* EC can detect when the host hangs. */
EC_FEATURE_HANG_DETECT = 19,
/* Report power information, for pit only */
EC_FEATURE_PMU = 20,
@@ -852,10 +852,42 @@ enum ec_feature_code {
EC_FEATURE_USB_MUX = 23,
/* Motion Sensor code has an internal software FIFO */
EC_FEATURE_MOTION_SENSE_FIFO = 24,
+ /* Support temporary secure vstore */
+ EC_FEATURE_VSTORE = 25,
+ /* EC decides on USB-C SS mux state, muxes configured by host */
+ EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26,
/* EC has RTC feature that can be controlled by host commands */
EC_FEATURE_RTC = 27,
+ /* The MCU exposes a Fingerprint sensor */
+ EC_FEATURE_FINGERPRINT = 28,
+ /* The MCU exposes a Touchpad */
+ EC_FEATURE_TOUCHPAD = 29,
+ /* The MCU has RWSIG task enabled */
+ EC_FEATURE_RWSIG = 30,
+ /* EC has device events support */
+ EC_FEATURE_DEVICE_EVENT = 31,
+ /* EC supports the unified wake masks for LPC/eSPI systems */
+ EC_FEATURE_UNIFIED_WAKE_MASKS = 32,
+ /* EC supports 64-bit host events */
+ EC_FEATURE_HOST_EVENT64 = 33,
+ /* EC runs code in RAM (not in place, a.k.a. XIP) */
+ EC_FEATURE_EXEC_IN_RAM = 34,
/* EC supports CEC commands */
EC_FEATURE_CEC = 35,
+ /* EC supports tight sensor timestamping. */
+ EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS = 36,
+ /*
+ * EC supports tablet mode detection aligned to Chrome and allows
+ * setting of threshold by host command using
+ * MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE.
+ */
+ EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37,
+ /* EC supports audio codec. */
+ EC_FEATURE_AUDIO_CODEC = 38,
+ /* EC Supports SCP. */
+ EC_FEATURE_SCP = 39,
+ /* The MCU is an Integrated Sensor Hub */
+ EC_FEATURE_ISH = 40,
};
#define EC_FEATURE_MASK_0(event_code) (1UL << (event_code % 32))
@@ -2729,6 +2761,63 @@ struct ec_params_host_sleep_event {
uint8_t sleep_event;
} __packed;
+/*
+ * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep
+ * transition failures
+ */
+#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0
+
+/* Disable timeout detection for this sleep transition */
+#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF
+
+struct ec_params_host_sleep_event_v1 {
+ /* The type of sleep being entered or exited. */
+ uint8_t sleep_event;
+
+ /* Padding */
+ uint8_t reserved;
+ union {
+ /* Parameters that apply for suspend messages. */
+ struct {
+ /*
+ * The timeout in milliseconds between when this message
+ * is received and when the EC will declare sleep
+ * transition failure if the sleep signal is not
+ * asserted.
+ */
+ uint16_t sleep_timeout_ms;
+ } suspend_params;
+
+ /* No parameters for non-suspend messages. */
+ };
+} __packed;
+
+/* A timeout occurred when this bit is set */
+#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000
+
+/*
+ * The mask defining which bits correspond to the number of sleep transitions,
+ * as well as the maximum number of suspend line transitions that will be
+ * reported back to the host.
+ */
+#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF
+
+struct ec_response_host_sleep_event_v1 {
+ union {
+ /* Response fields that apply for resume messages. */
+ struct {
+ /*
+ * The number of sleep power signal transitions that
+ * occurred since the suspend message. The high bit
+ * indicates a timeout occurred.
+ */
+ uint32_t sleep_transitions;
+ } resume_response;
+
+ /* No response fields for non-resume messages. */
+ };
+} __packed;
+
/*****************************************************************************/
/* Smart battery pass-through */
diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
index 71b09154e2db..5cd06ab26352 100644
--- a/include/linux/mfd/da9063/core.h
+++ b/include/linux/mfd/da9063/core.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Definitions for DA9063 MFD driver
*
@@ -5,12 +6,6 @@
*
* Author: Michal Hajduk, Dialog Semiconductor
* Author: Krystian Garbaciak, Dialog Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
*/
#ifndef __MFD_DA9063_CORE_H__
diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
index 5d42859cb441..ba706b0e28c2 100644
--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Registers definition for DA9063 modules
*
@@ -5,12 +6,6 @@
*
* Author: Michal Hajduk, Dialog Semiconductor
* Author: Krystian Garbaciak, Dialog Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
*/
#ifndef _DA9063_REG_H
@@ -215,9 +210,9 @@
/* DA9063 Configuration registers */
/* OTP */
-#define DA9063_REG_OPT_COUNT 0x101
-#define DA9063_REG_OPT_ADDR 0x102
-#define DA9063_REG_OPT_DATA 0x103
+#define DA9063_REG_OTP_CONT 0x101
+#define DA9063_REG_OTP_ADDR 0x102
+#define DA9063_REG_OTP_DATA 0x103
/* Customer Trim and Configuration */
#define DA9063_REG_T_OFFSET 0x104
diff --git a/include/linux/mfd/max77620.h b/include/linux/mfd/max77620.h
index ad2a9a852aea..82407fe85ca2 100644
--- a/include/linux/mfd/max77620.h
+++ b/include/linux/mfd/max77620.h
@@ -136,8 +136,8 @@
#define MAX77620_FPS_PERIOD_MIN_US 40
#define MAX20024_FPS_PERIOD_MIN_US 20
-#define MAX77620_FPS_PERIOD_MAX_US 2560
-#define MAX20024_FPS_PERIOD_MAX_US 5120
+#define MAX20024_FPS_PERIOD_MAX_US 2560
+#define MAX77620_FPS_PERIOD_MAX_US 5120
#define MAX77620_REG_FPS_GPIO1 0x54
#define MAX77620_REG_FPS_GPIO2 0x55
@@ -324,6 +324,7 @@ enum max77620_fps_src {
enum max77620_chip_id {
MAX77620,
MAX20024,
+ MAX77663,
};
struct max77620_chip {
diff --git a/include/linux/mfd/max77650.h b/include/linux/mfd/max77650.h
new file mode 100644
index 000000000000..c809e211a8cd
--- /dev/null
+++ b/include/linux/mfd/max77650.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 BayLibre SAS
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ *
+ * Common definitions for MAXIM 77650/77651 charger/power-supply.
+ */
+
+#ifndef MAX77650_H
+#define MAX77650_H
+
+#include <linux/bits.h>
+
+#define MAX77650_REG_INT_GLBL 0x00
+#define MAX77650_REG_INT_CHG 0x01
+#define MAX77650_REG_STAT_CHG_A 0x02
+#define MAX77650_REG_STAT_CHG_B 0x03
+#define MAX77650_REG_ERCFLAG 0x04
+#define MAX77650_REG_STAT_GLBL 0x05
+#define MAX77650_REG_INTM_GLBL 0x06
+#define MAX77650_REG_INTM_CHG 0x07
+#define MAX77650_REG_CNFG_GLBL 0x10
+#define MAX77650_REG_CID 0x11
+#define MAX77650_REG_CNFG_GPIO 0x12
+#define MAX77650_REG_CNFG_CHG_A 0x18
+#define MAX77650_REG_CNFG_CHG_B 0x19
+#define MAX77650_REG_CNFG_CHG_C 0x1a
+#define MAX77650_REG_CNFG_CHG_D 0x1b
+#define MAX77650_REG_CNFG_CHG_E 0x1c
+#define MAX77650_REG_CNFG_CHG_F 0x1d
+#define MAX77650_REG_CNFG_CHG_G 0x1e
+#define MAX77650_REG_CNFG_CHG_H 0x1f
+#define MAX77650_REG_CNFG_CHG_I 0x20
+#define MAX77650_REG_CNFG_SBB_TOP 0x28
+#define MAX77650_REG_CNFG_SBB0_A 0x29
+#define MAX77650_REG_CNFG_SBB0_B 0x2a
+#define MAX77650_REG_CNFG_SBB1_A 0x2b
+#define MAX77650_REG_CNFG_SBB1_B 0x2c
+#define MAX77650_REG_CNFG_SBB2_A 0x2d
+#define MAX77650_REG_CNFG_SBB2_B 0x2e
+#define MAX77650_REG_CNFG_LDO_A 0x38
+#define MAX77650_REG_CNFG_LDO_B 0x39
+#define MAX77650_REG_CNFG_LED0_A 0x40
+#define MAX77650_REG_CNFG_LED1_A 0x41
+#define MAX77650_REG_CNFG_LED2_A 0x42
+#define MAX77650_REG_CNFG_LED0_B 0x43
+#define MAX77650_REG_CNFG_LED1_B 0x44
+#define MAX77650_REG_CNFG_LED2_B 0x45
+#define MAX77650_REG_CNFG_LED_TOP 0x46
+
+#define MAX77650_CID_MASK GENMASK(3, 0)
+#define MAX77650_CID_BITS(_reg) (_reg & MAX77650_CID_MASK)
+
+#define MAX77650_CID_77650A 0x03
+#define MAX77650_CID_77650C 0x0a
+#define MAX77650_CID_77651A 0x06
+#define MAX77650_CID_77651B 0x08
+
+#endif /* MAX77650_H */
diff --git a/include/linux/mfd/stmfx.h b/include/linux/mfd/stmfx.h
new file mode 100644
index 000000000000..d890595b89b6
--- /dev/null
+++ b/include/linux/mfd/stmfx.h
@@ -0,0 +1,123 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 STMicroelectronics
+ * Author(s): Amelie Delaunay <amelie.delaunay@st.com>.
+ */
+
+#ifndef MFD_STMFX_H
+#define MFX_STMFX_H
+
+#include <linux/regmap.h>
+
+/* General */
+#define STMFX_REG_CHIP_ID 0x00 /* R */
+#define STMFX_REG_FW_VERSION_MSB 0x01 /* R */
+#define STMFX_REG_FW_VERSION_LSB 0x02 /* R */
+#define STMFX_REG_SYS_CTRL 0x40 /* RW */
+/* IRQ output management */
+#define STMFX_REG_IRQ_OUT_PIN 0x41 /* RW */
+#define STMFX_REG_IRQ_SRC_EN 0x42 /* RW */
+#define STMFX_REG_IRQ_PENDING 0x08 /* R */
+#define STMFX_REG_IRQ_ACK 0x44 /* RW */
+/* GPIO management */
+#define STMFX_REG_IRQ_GPI_PENDING1 0x0C /* R */
+#define STMFX_REG_IRQ_GPI_PENDING2 0x0D /* R */
+#define STMFX_REG_IRQ_GPI_PENDING3 0x0E /* R */
+#define STMFX_REG_GPIO_STATE1 0x10 /* R */
+#define STMFX_REG_GPIO_STATE2 0x11 /* R */
+#define STMFX_REG_GPIO_STATE3 0x12 /* R */
+#define STMFX_REG_IRQ_GPI_SRC1 0x48 /* RW */
+#define STMFX_REG_IRQ_GPI_SRC2 0x49 /* RW */
+#define STMFX_REG_IRQ_GPI_SRC3 0x4A /* RW */
+#define STMFX_REG_IRQ_GPI_EVT1 0x4C /* RW */
+#define STMFX_REG_IRQ_GPI_EVT2 0x4D /* RW */
+#define STMFX_REG_IRQ_GPI_EVT3 0x4E /* RW */
+#define STMFX_REG_IRQ_GPI_TYPE1 0x50 /* RW */
+#define STMFX_REG_IRQ_GPI_TYPE2 0x51 /* RW */
+#define STMFX_REG_IRQ_GPI_TYPE3 0x52 /* RW */
+#define STMFX_REG_IRQ_GPI_ACK1 0x54 /* RW */
+#define STMFX_REG_IRQ_GPI_ACK2 0x55 /* RW */
+#define STMFX_REG_IRQ_GPI_ACK3 0x56 /* RW */
+#define STMFX_REG_GPIO_DIR1 0x60 /* RW */
+#define STMFX_REG_GPIO_DIR2 0x61 /* RW */
+#define STMFX_REG_GPIO_DIR3 0x62 /* RW */
+#define STMFX_REG_GPIO_TYPE1 0x64 /* RW */
+#define STMFX_REG_GPIO_TYPE2 0x65 /* RW */
+#define STMFX_REG_GPIO_TYPE3 0x66 /* RW */
+#define STMFX_REG_GPIO_PUPD1 0x68 /* RW */
+#define STMFX_REG_GPIO_PUPD2 0x69 /* RW */
+#define STMFX_REG_GPIO_PUPD3 0x6A /* RW */
+#define STMFX_REG_GPO_SET1 0x6C /* RW */
+#define STMFX_REG_GPO_SET2 0x6D /* RW */
+#define STMFX_REG_GPO_SET3 0x6E /* RW */
+#define STMFX_REG_GPO_CLR1 0x70 /* RW */
+#define STMFX_REG_GPO_CLR2 0x71 /* RW */
+#define STMFX_REG_GPO_CLR3 0x72 /* RW */
+
+#define STMFX_REG_MAX 0xB0
+
+/* MFX boot time is around 10ms, so after reset, we have to wait this delay */
+#define STMFX_BOOT_TIME_MS 10
+
+/* STMFX_REG_CHIP_ID bitfields */
+#define STMFX_REG_CHIP_ID_MASK GENMASK(7, 0)
+
+/* STMFX_REG_SYS_CTRL bitfields */
+#define STMFX_REG_SYS_CTRL_GPIO_EN BIT(0)
+#define STMFX_REG_SYS_CTRL_TS_EN BIT(1)
+#define STMFX_REG_SYS_CTRL_IDD_EN BIT(2)
+#define STMFX_REG_SYS_CTRL_ALTGPIO_EN BIT(3)
+#define STMFX_REG_SYS_CTRL_SWRST BIT(7)
+
+/* STMFX_REG_IRQ_OUT_PIN bitfields */
+#define STMFX_REG_IRQ_OUT_PIN_TYPE BIT(0) /* 0-OD 1-PP */
+#define STMFX_REG_IRQ_OUT_PIN_POL BIT(1) /* 0-active LOW 1-active HIGH */
+
+/* STMFX_REG_IRQ_(SRC_EN/PENDING/ACK) bit shift */
+enum stmfx_irqs {
+ STMFX_REG_IRQ_SRC_EN_GPIO = 0,
+ STMFX_REG_IRQ_SRC_EN_IDD,
+ STMFX_REG_IRQ_SRC_EN_ERROR,
+ STMFX_REG_IRQ_SRC_EN_TS_DET,
+ STMFX_REG_IRQ_SRC_EN_TS_NE,
+ STMFX_REG_IRQ_SRC_EN_TS_TH,
+ STMFX_REG_IRQ_SRC_EN_TS_FULL,
+ STMFX_REG_IRQ_SRC_EN_TS_OVF,
+ STMFX_REG_IRQ_SRC_MAX,
+};
+
+enum stmfx_functions {
+ STMFX_FUNC_GPIO = BIT(0), /* GPIO[15:0] */
+ STMFX_FUNC_ALTGPIO_LOW = BIT(1), /* aGPIO[3:0] */
+ STMFX_FUNC_ALTGPIO_HIGH = BIT(2), /* aGPIO[7:4] */
+ STMFX_FUNC_TS = BIT(3),
+ STMFX_FUNC_IDD = BIT(4),
+};
+
+/**
+ * struct stmfx_ddata - STMFX MFD structure
+ * @device: device reference used for logs
+ * @map: register map
+ * @vdd: STMFX power supply
+ * @irq_domain: IRQ domain
+ * @lock: IRQ bus lock
+ * @irq_src: cache of IRQ_SRC_EN register for bus_lock
+ * @bkp_sysctrl: backup of SYS_CTRL register for suspend/resume
+ * @bkp_irqoutpin: backup of IRQ_OUT_PIN register for suspend/resume
+ */
+struct stmfx {
+ struct device *dev;
+ struct regmap *map;
+ struct regulator *vdd;
+ struct irq_domain *irq_domain;
+ struct mutex lock; /* IRQ bus lock */
+ u8 irq_src;
+#ifdef CONFIG_PM
+ u8 bkp_sysctrl;
+ u8 bkp_irqoutpin;
+#endif
+};
+
+int stmfx_function_enable(struct stmfx *stmfx, u32 func);
+int stmfx_function_disable(struct stmfx *stmfx, u32 func);
+#endif
diff --git a/include/linux/mfd/syscon/atmel-matrix.h b/include/linux/mfd/syscon/atmel-matrix.h
index 8293c3e2a82a..f61cd127a852 100644
--- a/include/linux/mfd/syscon/atmel-matrix.h
+++ b/include/linux/mfd/syscon/atmel-matrix.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef _LINUX_MFD_SYSCON_ATMEL_MATRIX_H
diff --git a/include/linux/mfd/syscon/atmel-mc.h b/include/linux/mfd/syscon/atmel-mc.h
index afd9b8f1e363..99c56205c410 100644
--- a/include/linux/mfd/syscon/atmel-mc.h
+++ b/include/linux/mfd/syscon/atmel-mc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
@@ -5,11 +6,6 @@
* Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals
* registers.
* Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef _LINUX_MFD_SYSCON_ATMEL_MC_H_
diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h
index 7a367f34b66a..e9e24f4c4578 100644
--- a/include/linux/mfd/syscon/atmel-smc.h
+++ b/include/linux/mfd/syscon/atmel-smc.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
/*
* Atmel SMC (Static Memory Controller) register offsets and bit definitions.
*
@@ -5,10 +6,6 @@
* Copyright (C) 2014 Free Electrons
*
* Author: Boris Brezillon <boris.brezillon@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_
diff --git a/include/linux/mfd/syscon/atmel-st.h b/include/linux/mfd/syscon/atmel-st.h
index 8acf1ec1fa32..5b6013d0c440 100644
--- a/include/linux/mfd/syscon/atmel-st.h
+++ b/include/linux/mfd/syscon/atmel-st.h
@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* System Timer (ST) - System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
*/
#ifndef _LINUX_MFD_SYSCON_ATMEL_ST_H
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
index c1b25f5e386d..f232c8130d00 100644
--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
@@ -410,6 +410,15 @@
#define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK (0x3 << 17)
#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT (0x3 << 13)
+#define IMX6SX_GPR2_MQS_OVERSAMPLE_MASK (0x1 << 26)
+#define IMX6SX_GPR2_MQS_OVERSAMPLE_SHIFT (26)
+#define IMX6SX_GPR2_MQS_EN_MASK (0x1 << 25)
+#define IMX6SX_GPR2_MQS_EN_SHIFT (25)
+#define IMX6SX_GPR2_MQS_SW_RST_MASK (0x1 << 24)
+#define IMX6SX_GPR2_MQS_SW_RST_SHIFT (24)
+#define IMX6SX_GPR2_MQS_CLK_DIV_MASK (0xFF << 16)
+#define IMX6SX_GPR2_MQS_CLK_DIV_SHIFT (16)
+
#define IMX6SX_GPR4_FEC_ENET1_STOP_REQ (0x1 << 3)
#define IMX6SX_GPR4_FEC_ENET2_STOP_REQ (0x1 << 4)