summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt44
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt58
-rw-r--r--arch/riscv/Makefile3
-rw-r--r--arch/riscv/configs/defconfig1
-rw-r--r--arch/riscv/include/asm/csr.h1
-rw-r--r--arch/riscv/include/asm/irq.h5
-rw-r--r--arch/riscv/include/asm/perf_event.h1
-rw-r--r--arch/riscv/include/asm/smp.h6
-rw-r--r--arch/riscv/kernel/entry.S4
-rw-r--r--arch/riscv/kernel/head.S2
-rw-r--r--arch/riscv/kernel/irq.c55
-rw-r--r--arch/riscv/kernel/perf_event.c1
-rw-r--r--arch/riscv/kernel/setup.c27
-rw-r--r--arch/riscv/kernel/smp.c6
-rw-r--r--arch/riscv/kernel/smpboot.c1
-rw-r--r--arch/riscv/kernel/time.c30
-rw-r--r--arch/riscv/kernel/traps.c1
-rw-r--r--arch/riscv/kernel/vdso/Makefile4
-rw-r--r--arch/riscv/lib/Makefile1
-rw-r--r--arch/riscv/lib/tishift.S42
-rw-r--r--drivers/clocksource/Kconfig11
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/riscv_timer.c105
-rw-r--r--drivers/irqchip/Kconfig12
-rw-r--r--drivers/irqchip/Makefile1
-rw-r--r--drivers/irqchip/irq-sifive-plic.c260
-rw-r--r--include/linux/cpuhotplug.h1
27 files changed, 625 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
new file mode 100644
index 000000000000..b0a8af51c388
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
@@ -0,0 +1,44 @@
+RISC-V Hart-Level Interrupt Controller (HLIC)
+---------------------------------------------
+
+RISC-V cores include Control Status Registers (CSRs) which are local to each
+CPU core (HART in RISC-V terminology) and can be read or written by software.
+Some of these CSRs are used to control local interrupts connected to the core.
+Every interrupt is ultimately routed through a hart's HLIC before it
+interrupts that hart.
+
+The RISC-V supervisor ISA manual specifies three interrupt sources that are
+attached to every HLIC: software interrupts, the timer interrupt, and external
+interrupts. Software interrupts are used to send IPIs between cores. The
+timer interrupt comes from an architecturally mandated real-time timer that is
+controller via Supervisor Binary Interface (SBI) calls and CSR reads. External
+interrupts connect all other device interrupts to the HLIC, which are routed
+via the platform-level interrupt controller (PLIC).
+
+All RISC-V systems that conform to the supervisor ISA specification are
+required to have a HLIC with these three interrupt sources present. Since the
+interrupt map is defined by the ISA it's not listed in the HLIC's device tree
+entry, though external interrupt controllers (like the PLIC, for example) will
+need to define how their interrupts map to the relevant HLICs. This means
+a PLIC interrupt property will typically list the HLICs for all present HARTs
+in the system.
+
+Required properties:
+- compatible : "riscv,cpu-intc"
+- #interrupt-cells : should be <1>
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Furthermore, this interrupt-controller MUST be embedded inside the cpu
+definition of the hart whose CSRs control these local interrupts.
+
+An example device tree entry for a HLIC is show below.
+
+ cpu1: cpu@1 {
+ compatible = "riscv";
+ ...
+ cpu1-intc: interrupt-controller {
+ #interrupt-cells = <1>;
+ compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
+ interrupt-controller;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
new file mode 100644
index 000000000000..6adf7a6e8825
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.txt
@@ -0,0 +1,58 @@
+SiFive Platform-Level Interrupt Controller (PLIC)
+-------------------------------------------------
+
+SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
+(PLIC) high-level specification in the RISC-V Privileged Architecture
+specification. The PLIC connects all external interrupts in the system to all
+hart contexts in the system, via the external interrupt source in each hart.
+
+A hart context is a privilege mode in a hardware execution thread. For example,
+in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+privilege modes per hart; machine mode and supervisor mode.
+
+Each interrupt can be enabled on per-context basis. Any context can claim
+a pending enabled interrupt and then release it once it has been handled.
+
+Each interrupt has a configurable priority. Higher priority interrupts are
+serviced first. Each context can specify a priority threshold. Interrupts
+with priority below this threshold will not cause the PLIC to raise its
+interrupt line leading to the context.
+
+While the PLIC supports both edge-triggered and level-triggered interrupts,
+interrupt handlers are oblivious to this distinction and therefore it is not
+specified in the PLIC device-tree binding.
+
+While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+"sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+contains a specific memory layout, which is documented in chapter 8 of the
+SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+Required properties:
+- compatible : "sifive,plic-1.0.0" and a string identifying the actual
+ detailed implementation in case that specific bugs need to be worked around.
+- #address-cells : should be <0> or more.
+- #interrupt-cells : should be <1> or more.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- reg : Should contain 1 register range (address and length).
+- interrupts-extended : Specifies which contexts are connected to the PLIC,
+ with "-1" specifying that a context is not present. Each node pointed
+ to should be a riscv,cpu-intc node, which has a riscv node as parent.
+- riscv,ndev: Specifies how many external interrupts are supported by
+ this controller.
+
+Example:
+
+ plic: interrupt-controller@c000000 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ compatible = "sifive,plic-1.0.0", "sifive,fu540-c000-plic";
+ interrupt-controller;
+ interrupts-extended = <
+ &cpu0-intc 11
+ &cpu1-intc 11 &cpu1-intc 9
+ &cpu2-intc 11 &cpu2-intc 9
+ &cpu3-intc 11 &cpu3-intc 9
+ &cpu4-intc 11 &cpu4-intc 9>;
+ reg = <0xc000000 0x4000000>;
+ riscv,ndev = <10>;
+ };
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 2627e4813edf..9ddd88bb30b7 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -25,6 +25,9 @@ ifeq ($(CONFIG_ARCH_RV64I),y)
KBUILD_CFLAGS += -mabi=lp64
KBUILD_AFLAGS += -mabi=lp64
+
+ KBUILD_CFLAGS += $(call cc-ifversion, -ge, 0500, -DCONFIG_ARCH_SUPPORTS_INT128)
+
KBUILD_MARCH = rv64im
LDFLAGS += -melf64lriscv
else
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 07326466871b..36473d7dbaac 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -76,3 +76,4 @@ CONFIG_ROOT_NFS=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
+CONFIG_SIFIVE_PLIC=y
diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 421fa3585798..28a0d1cb374c 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -54,6 +54,7 @@
/* Interrupt Enable and Interrupt Pending flags */
#define SIE_SSIE _AC(0x00000002, UL) /* Software Interrupt Enable */
#define SIE_STIE _AC(0x00000020, UL) /* Timer Interrupt Enable */
+#define SIE_SEIE _AC(0x00000200, UL) /* External Interrupt Enable */
#define EXC_INST_MISALIGNED 0
#define EXC_INST_ACCESS 1
diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h
index 4dee9d4c13c0..996b6fbe17a6 100644
--- a/arch/riscv/include/asm/irq.h
+++ b/arch/riscv/include/asm/irq.h
@@ -17,11 +17,8 @@
#define NR_IRQS 0
-#define INTERRUPT_CAUSE_SOFTWARE 1
-#define INTERRUPT_CAUSE_TIMER 5
-#define INTERRUPT_CAUSE_EXTERNAL 9
-
void riscv_timer_interrupt(void);
+void riscv_software_interrupt(void);
#include <asm-generic/irq.h>
diff --git a/arch/riscv/include/asm/perf_event.h b/arch/riscv/include/asm/perf_event.h
index 0e638a0c3feb..aefbfaa6a781 100644
--- a/arch/riscv/include/asm/perf_event.h
+++ b/arch/riscv/include/asm/perf_event.h
@@ -10,6 +10,7 @@
#include <linux/perf_event.h>
#include <linux/ptrace.h>
+#include <linux/interrupt.h>
#define RISCV_BASE_COUNTERS 2
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 85e4220839b0..36016845461d 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -25,9 +25,6 @@
#ifdef CONFIG_SMP
/* SMP initialization hook for setup_arch */
-void __init init_clockevent(void);
-
-/* SMP initialization hook for setup_arch */
void __init setup_smp(void);
/* Hook for the generic smp_call_function_many() routine. */
@@ -44,9 +41,6 @@ void arch_send_call_function_single_ipi(int cpu);
*/
#define raw_smp_processor_id() (*((int*)((char*)get_current() + TASK_TI_CPU)))
-/* Interprocessor interrupt handler */
-irqreturn_t handle_ipi(void);
-
#endif /* CONFIG_SMP */
#endif /* _ASM_RISCV_SMP_H */
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 9aaf6c986771..fa2c08e3c05e 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -168,8 +168,8 @@ ENTRY(handle_exception)
/* Handle interrupts */
move a0, sp /* pt_regs */
- REG_L a1, handle_arch_irq
- jr a1
+ move a1, s4 /* scause */
+ tail do_IRQ
1:
/* Exceptions run with interrupts enabled */
csrs sstatus, SR_SIE
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 6e07ed37bbff..c4d2c63f9a29 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -94,6 +94,7 @@ relocate:
or a0, a0, a1
sfence.vma
csrw sptbr, a0
+.align 2
1:
/* Set trap vector to spin forever to help debug */
la a0, .Lsecondary_park
@@ -143,6 +144,7 @@ relocate:
tail smp_callin
#endif
+.align 2
.Lsecondary_park:
/* We lack SMP support or have too many harts, so park this hart */
wfi
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 7bcdaed15703..0cfac48a1272 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -1,21 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2017 SiFive
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright (C) 2018 Christoph Hellwig
*/
#include <linux/interrupt.h>
#include <linux/irqchip.h>
#include <linux/irqdomain.h>
+/*
+ * Possible interrupt causes:
+ */
+#define INTERRUPT_CAUSE_SOFTWARE 1
+#define INTERRUPT_CAUSE_TIMER 5
+#define INTERRUPT_CAUSE_EXTERNAL 9
+
+/*
+ * The high order bit of the trap cause register is always set for
+ * interrupts, which allows us to differentiate them from exceptions
+ * quickly. The INTERRUPT_CAUSE_* macros don't contain that bit, so we
+ * need to mask it off.
+ */
+#define INTERRUPT_CAUSE_FLAG (1UL << (__riscv_xlen - 1))
+
+asmlinkage void __irq_entry do_IRQ(struct pt_regs *regs, unsigned long cause)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+
+ irq_enter();
+ switch (cause & ~INTERRUPT_CAUSE_FLAG) {
+ case INTERRUPT_CAUSE_TIMER:
+ riscv_timer_interrupt();
+ break;
+#ifdef CONFIG_SMP
+ case INTERRUPT_CAUSE_SOFTWARE:
+ /*
+ * We only use software interrupts to pass IPIs, so if a non-SMP
+ * system gets one, then we don't know what to do.
+ */
+ riscv_software_interrupt();
+ break;
+#endif
+ case INTERRUPT_CAUSE_EXTERNAL:
+ handle_arch_irq(regs);
+ break;
+ default:
+ panic("unexpected interrupt cause");
+ }
+ irq_exit();
+
+ set_irq_regs(old_regs);
+}
+
void __init init_IRQ(void)
{
irqchip_init();
diff --git a/arch/riscv/kernel/perf_event.c b/arch/riscv/kernel/perf_event.c
index b0e10c4e9f77..a243fae1c1db 100644
--- a/arch/riscv/kernel/perf_event.c
+++ b/arch/riscv/kernel/perf_event.c
@@ -27,7 +27,6 @@
#include <linux/mutex.h>
#include <linux/bitmap.h>
#include <linux/irq.h>
-#include <linux/interrupt.h>
#include <linux/perf_event.h>
#include <linux/atomic.h>
#include <linux/of.h>
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index f0d2070866d4..db20dc630e7e 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -39,6 +39,27 @@
#include <asm/tlbflush.h>
#include <asm/thread_info.h>
+#ifdef CONFIG_EARLY_PRINTK
+static void sbi_console_write(struct console *co, const char *buf,
+ unsigned int n)
+{
+ int i;
+
+ for (i = 0; i < n; ++i) {
+ if (buf[i] == '\n')
+ sbi_console_putchar('\r');
+ sbi_console_putchar(buf[i]);
+ }
+}
+
+struct console riscv_sbi_early_console_dev __initdata = {
+ .name = "early",
+ .write = sbi_console_write,
+ .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME,
+ .index = -1
+};
+#endif
+
#ifdef CONFIG_DUMMY_CONSOLE
struct screen_info screen_info = {
.orig_video_lines = 30,
@@ -195,6 +216,12 @@ static void __init setup_bootmem(void)
void __init setup_arch(char **cmdline_p)
{
+#if defined(CONFIG_EARLY_PRINTK)
+ if (likely(early_console == NULL)) {
+ early_console = &riscv_sbi_early_console_dev;
+ register_console(early_console);
+ }
+#endif
*cmdline_p = boot_command_line;
parse_early_param();
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 6d3962435720..906fe21ea21b 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -45,7 +45,7 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
}
-irqreturn_t handle_ipi(void)
+void riscv_software_interrupt(void)
{
unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
@@ -60,7 +60,7 @@ irqreturn_t handle_ipi(void)
ops = xchg(pending_ipis, 0);
if (ops == 0)
- return IRQ_HANDLED;
+ return;
if (ops & (1 << IPI_RESCHEDULE))
scheduler_ipi();
@@ -73,8 +73,6 @@ irqreturn_t handle_ipi(void)
/* Order data access and bit testing. */
mb();
}
-
- return IRQ_HANDLED;
}
static void
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index f741458c5a3f..56abab6a9812 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -104,7 +104,6 @@ asmlinkage void __init smp_callin(void)
current->active_mm = mm;
trap_init();
- init_clockevent();
notify_cpu_starting(smp_processor_id());
set_cpu_online(smp_processor_id(), 1);
local_flush_tlb_all();
diff --git a/arch/riscv/kernel/time.c b/arch/riscv/kernel/time.c
index 2463fcca719e..1911c8f6b8a6 100644
--- a/arch/riscv/kernel/time.c
+++ b/arch/riscv/kernel/time.c
@@ -13,38 +13,11 @@
*/
#include <linux/clocksource.h>
-#include <linux/clockchips.h>
#include <linux/delay.h>
-
-#ifdef CONFIG_RISCV_TIMER
-#include <linux/timer_riscv.h>
-#endif
-
#include <asm/sbi.h>
unsigned long riscv_timebase;
-DECLARE_PER_CPU(struct clock_event_device, riscv_clock_event);
-
-void riscv_timer_interrupt(void)
-{
-#ifdef CONFIG_RISCV_TIMER
- /*
- * FIXME: This needs to be cleaned up along with the rest of the IRQ
- * handling cleanup. See irq.c for more details.
- */
- struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
-
- evdev->event_handler(evdev);
-#endif
-}
-
-void __init init_clockevent(void)
-{
- timer_probe();
- csr_set(sie, SIE_STIE);
-}
-
void __init time_init(void)
{
struct device_node *cpu;
@@ -56,6 +29,5 @@ void __init time_init(void)
riscv_timebase = prop;
lpj_fine = riscv_timebase / HZ;
-
- init_clockevent();
+ timer_probe();
}
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index 81a1952015a6..24a9333dda2c 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -138,7 +138,6 @@ asmlinkage void do_trap_break(struct pt_regs *regs)
#endif /* CONFIG_GENERIC_BUG */
force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)(regs->sepc), current);
- regs->sepc += 0x4;
}
#ifdef CONFIG_GENERIC_BUG
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index f6561b783b61..eed1c137f618 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -52,8 +52,8 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE
# Add -lgcc so rv32 gets static muldi3 and lshrdi3 definitions.
# Make sure only to export the intended __vdso_xxx symbol offsets.
quiet_cmd_vdsold = VDSOLD $@
- cmd_vdsold = $(CC) $(KCFLAGS) $(call cc-option, -no-pie) -nostdlib $(SYSCFLAGS_$(@F)) \
- -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp -lgcc && \
+ cmd_vdsold = $(CC) $(KBUILD_CFLAGS) $(call cc-option, -no-pie) -nostdlib -nostartfiles $(SYSCFLAGS_$(@F)) \
+ -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp && \
$(CROSS_COMPILE)objcopy \
$(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 596c2ca40d63..445ec84f9a47 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -2,5 +2,6 @@ lib-y += delay.o
lib-y += memcpy.o
lib-y += memset.o
lib-y += uaccess.o
+lib-y += tishift.o
lib-$(CONFIG_32BIT) += udivdi3.o
diff --git a/arch/riscv/lib/tishift.S b/arch/riscv/lib/tishift.S
new file mode 100644
index 000000000000..69abb1277234
--- /dev/null
+++ b/arch/riscv/lib/tishift.S
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2018 Free Software Foundation, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+ .globl __lshrti3
+__lshrti3:
+ beqz a2, .L1
+ li a5,64
+ sub a5,a5,a2
+ addi sp,sp,-16
+ sext.w a4,a5
+ blez a5, .L2
+ sext.w a2,a2
+ sll a4,a1,a4
+ srl a0,a0,a2
+ srl a1,a1,a2
+ or a0,a0,a4
+ sd a1,8(sp)
+ sd a0,0(sp)
+ ld a0,0(sp)
+ ld a1,8(sp)
+ addi sp,sp,16
+ ret
+.L1:
+ ret
+.L2:
+ negw a4,a4
+ srl a1,a1,a4
+ sd a1,0(sp)
+ sd zero,8(sp)
+ ld a0,0(sp)
+ ld a1,8(sp)
+ addi sp,sp,16
+ ret
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index dec0dd88ec15..a11f4ba98b05 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -609,4 +609,15 @@ config ATCPIT100_TIMER
help
This option enables support for the Andestech ATCPIT100 timers.
+config RISCV_TIMER
+ bool "Timer for the RISC-V platform"
+ depends on RISCV
+ default y
+ select TIMER_PROBE
+ select TIMER_OF
+ help
+ This enables the per-hart timer built into all RISC-V systems, which
+ is accessed via both the SBI and the rdcycle instruction. This is
+ required for all RISC-V systems.
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index c070cc7992e9..db51b2427e8a 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -78,3 +78,4 @@ obj-$(CONFIG_H8300_TPU) += h8300_tpu.o
obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
+obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
diff --git a/drivers/clocksource/riscv_timer.c b/drivers/clocksource/riscv_timer.c
new file mode 100644
index 000000000000..4e8b347e43e2
--- /dev/null
+++ b/drivers/clocksource/riscv_timer.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ */
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/sbi.h>
+
+/*
+ * All RISC-V systems have a timer attached to every hart. These timers can be
+ * read by the 'rdcycle' pseudo instruction, and can use the SBI to setup
+ * events. In order to abstract the architecture-specific timer reading and
+ * setting functions away from the clock event insertion code, we provide
+ * function pointers to the clockevent subsystem that perform two basic
+ * operations: rdtime() reads the timer on the current CPU, and
+ * next_event(delta) sets the next timer event to 'delta' cycles in the future.
+ * As the timers are inherently a per-cpu resource, these callbacks perform
+ * operations on the current hart. There is guaranteed to be exactly one timer
+ * per hart on all RISC-V systems.
+ */
+
+static int riscv_clock_next_event(unsigned long delta,
+ struct clock_event_device *ce)
+{
+ csr_set(sie, SIE_STIE);
+ sbi_set_timer(get_cycles64() + delta);
+ return 0;
+}
+
+static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
+ .name = "riscv_timer_clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 100,
+ .set_next_event = riscv_clock_next_event,
+};
+
+/*
+ * It is guaranteed that all the timers across all the harts are synchronized
+ * within one tick of each other, so while this could technically go
+ * backwards when hopping between CPUs, practically it won't happen.
+ */
+static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs)
+{
+ return get_cycles64();
+}
+
+static DEFINE_PER_CPU(struct clocksource, riscv_clocksource) = {
+ .name = "riscv_clocksource",
+ .rating = 300,
+ .mask = CLOCKSOURCE_MASK(BITS_PER_LONG),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .read = riscv_clocksource_rdtime,
+};
+
+static int riscv_timer_starting_cpu(unsigned int cpu)
+{
+ struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu);
+
+ ce->cpumask = cpumask_of(cpu);
+ clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
+
+ csr_set(sie, SIE_STIE);
+ return 0;
+}
+
+static int riscv_timer_dying_cpu(unsigned int cpu)
+{
+ csr_clear(sie, SIE_STIE);
+ return 0;
+}
+
+/* called directly from the low-level interrupt handler */
+void riscv_timer_interrupt(void)
+{
+ struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
+
+ csr_clear(sie, SIE_STIE);
+ evdev->event_handler(evdev);
+}
+
+static int __init riscv_timer_init_dt(struct device_node *n)
+{
+ int cpu_id = riscv_of_processor_hart(n), error;
+ struct clocksource *cs;
+
+ if (cpu_id != smp_processor_id())
+ return 0;
+
+ cs = per_cpu_ptr(&riscv_clocksource, cpu_id);
+ clocksource_register_hz(cs, riscv_timebase);
+
+ error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
+ "clockevents/riscv/timer:starting",
+ riscv_timer_starting_cpu, riscv_timer_dying_cpu);
+ if (error)
+ pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
+ error, cpu_id);
+ return error;
+}
+
+TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d564d21245c5..383e7b70221d 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -372,3 +372,15 @@ config QCOM_PDC
IRQs for Qualcomm Technologies Inc (QTI) mobile chips.
endmenu
+
+config SIFIVE_PLIC
+ bool "SiFive Platform-Level Interrupt Controller"
+ depends on RISCV
+ help
+ This enables support for the PLIC chip found in SiFive (and
+ potentially other) RISC-V systems. The PLIC controls devices
+ interrupts and connects them to each core's local interrupt
+ controller. Aside from timer and software interrupts, all other
+ interrupt sources are subordinate to the PLIC.
+
+ If you don't know what to do here, say Y.
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 15f268f646bf..fbd1ec8070ef 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -87,3 +87,4 @@ obj-$(CONFIG_MESON_IRQ_GPIO) += irq-meson-gpio.o
obj-$(CONFIG_GOLDFISH_PIC) += irq-goldfish-pic.o
obj-$(CONFIG_NDS32) += irq-ativic32.o
obj-$(CONFIG_QCOM_PDC) += qcom-pdc.o
+obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
new file mode 100644
index 000000000000..532e9d68c704
--- /dev/null
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 SiFive
+ * Copyright (C) 2018 Christoph Hellwig
+ */
+#define pr_fmt(fmt) "plic: " fmt
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+/*
+ * This driver implements a version of the RISC-V PLIC with the actual layout
+ * specified in chapter 8 of the SiFive U5 Coreplex Series Manual:
+ *
+ * https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf
+ *
+ * The largest number supported by devices marked as 'sifive,plic-1.0.0', is
+ * 1024, of which device 0 is defined as non-existent by the RISC-V Privileged
+ * Spec.
+ */
+
+#define MAX_DEVICES 1024
+#define MAX_CONTEXTS 15872
+
+/*
+ * Each interrupt source has a priority register associated with it.
+ * We always hardwire it to one in Linux.
+ */
+#define PRIORITY_BASE 0
+#define PRIORITY_PER_ID 4
+
+/*
+ * Each hart context has a vector of interrupt enable bits associated with it.
+ * There's one bit for each interrupt source.
+ */
+#define ENABLE_BASE 0x2000
+#define ENABLE_PER_HART 0x80
+
+/*
+ * Each hart context has a set of control registers associated with it. Right
+ * now there's only two: a source priority threshold over which the hart will
+ * take an interrupt, and a register to claim interrupts.
+ */
+#define CONTEXT_BASE 0x200000
+#define CONTEXT_PER_HART 0x1000
+#define CONTEXT_THRESHOLD 0x00
+#define CONTEXT_CLAIM 0x04
+
+static void __iomem *plic_regs;
+
+struct plic_handler {
+ bool present;
+ int ctxid;
+};
+static DEFINE_PER_CPU(struct plic_handler, plic_handlers);
+
+static inline void __iomem *plic_hart_offset(int ctxid)
+{
+ return plic_regs + CONTEXT_BASE + ctxid * CONTEXT_PER_HART;
+}
+
+static inline u32 __iomem *plic_enable_base(int ctxid)
+{
+ return plic_regs + ENABLE_BASE + ctxid * ENABLE_PER_HART;
+}
+
+/*
+ * Protect mask operations on the registers given that we can't assume that
+ * atomic memory operations work on them.
+ */
+static DEFINE_RAW_SPINLOCK(plic_toggle_lock);
+
+static inline void plic_toggle(int ctxid, int hwirq, int enable)
+{
+ u32 __iomem *reg = plic_enable_base(ctxid) + (hwirq / 32);
+ u32 hwirq_mask = 1 << (hwirq % 32);
+
+ raw_spin_lock(&plic_toggle_lock);
+ if (enable)
+ writel(readl(reg) | hwirq_mask, reg);
+ else
+ writel(readl(reg) & ~hwirq_mask, reg);
+ raw_spin_unlock(&plic_toggle_lock);
+}
+
+static inline void plic_irq_toggle(struct irq_data *d, int enable)
+{
+ int cpu;
+
+ writel(enable, plic_regs + PRIORITY_BASE + d->hwirq * PRIORITY_PER_ID);
+ for_each_cpu(cpu, irq_data_get_affinity_mask(d)) {
+ struct plic_handler *handler = per_cpu_ptr(&plic_handlers, cpu);
+
+ if (handler->present)
+ plic_toggle(handler->ctxid, d->hwirq, enable);
+ }
+}
+
+static void plic_irq_enable(struct irq_data *d)
+{
+ plic_irq_toggle(d, 1);
+}
+
+static void plic_irq_disable(struct irq_data *d)
+{
+ plic_irq_toggle(d, 0);
+}
+
+static struct irq_chip plic_chip = {
+ .name = "SiFive PLIC",
+ /*
+ * There is no need to mask/unmask PLIC interrupts. They are "masked"
+ * by reading claim and "unmasked" when writing it back.
+ */
+ .irq_enable = plic_irq_enable,
+ .irq_disable = plic_irq_disable,
+};
+
+static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &plic_chip, handle_simple_irq);
+ irq_set_chip_data(irq, NULL);
+ irq_set_noprobe(irq);
+ return 0;
+}
+
+static const struct irq_domain_ops plic_irqdomain_ops = {
+ .map = plic_irqdomain_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static struct irq_domain *plic_irqdomain;
+
+/*
+ * Handling an interrupt is a two-step process: first you claim the interrupt
+ * by reading the claim register, then you complete the interrupt by writing
+ * that source ID back to the same claim register. This automatically enables
+ * and disables the interrupt, so there's nothing else to do.
+ */
+static void plic_handle_irq(struct pt_regs *regs)
+{
+ struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
+ void __iomem *claim = plic_hart_offset(handler->ctxid) + CONTEXT_CLAIM;
+ irq_hw_number_t hwirq;
+
+ WARN_ON_ONCE(!handler->present);
+
+ csr_clear(sie, SIE_SEIE);
+ while ((hwirq = readl(claim))) {
+ int irq = irq_find_mapping(plic_irqdomain, hwirq);
+
+ if (unlikely(irq <= 0))
+ pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
+ hwirq);
+ else
+ generic_handle_irq(irq);
+ writel(hwirq, claim);
+ }
+ csr_set(sie, SIE_SEIE);
+}
+
+/*
+ * Walk up the DT tree until we find an active RISC-V core (HART) node and
+ * extract the cpuid from it.
+ */
+static int plic_find_hart_id(struct device_node *node)
+{
+ for (; node; node = node->parent) {
+ if (of_device_is_compatible(node, "riscv"))
+ return riscv_of_processor_hart(node);
+ }
+
+ return -1;
+}
+
+static int __init plic_init(struct device_node *node,
+ struct device_node *parent)
+{
+ int error = 0, nr_handlers, nr_mapped = 0, i;
+ u32 nr_irqs;
+
+ if (plic_regs) {
+ pr_warn("PLIC already present.\n");
+ return -ENXIO;
+ }
+
+ plic_regs = of_iomap(node, 0);
+ if (WARN_ON(!plic_regs))
+ return -EIO;
+
+ error = -EINVAL;
+ of_property_read_u32(node, "riscv,ndev", &nr_irqs);
+ if (WARN_ON(!nr_irqs))
+ goto out_iounmap;
+
+ nr_handlers = of_irq_count(node);
+ if (WARN_ON(!nr_handlers))
+ goto out_iounmap;
+ if (WARN_ON(nr_handlers < num_possible_cpus()))
+ goto out_iounmap;
+
+ error = -ENOMEM;
+ plic_irqdomain = irq_domain_add_linear(node, nr_irqs + 1,
+ &plic_irqdomain_ops, NULL);
+ if (WARN_ON(!plic_irqdomain))
+ goto out_iounmap;
+
+ for (i = 0; i < nr_handlers; i++) {
+ struct of_phandle_args parent;
+ struct plic_handler *handler;
+ irq_hw_number_t hwirq;
+ int cpu;
+
+ if (of_irq_parse_one(node, i, &parent)) {
+ pr_err("failed to parse parent for context %d.\n", i);
+ continue;
+ }
+
+ /* skip context holes */
+ if (parent.args[0] == -1)
+ continue;
+
+ cpu = plic_find_hart_id(parent.np);
+ if (cpu < 0) {
+ pr_warn("failed to parse hart ID for context %d.\n", i);
+ continue;
+ }
+
+ handler = per_cpu_ptr(&plic_handlers, cpu);
+ handler->present = true;
+ handler->ctxid = i;
+
+ /* priority must be > threshold to trigger an interrupt */
+ writel(0, plic_hart_offset(i) + CONTEXT_THRESHOLD);
+ for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
+ plic_toggle(i, hwirq, 0);
+ nr_mapped++;
+ }
+
+ pr_info("mapped %d interrupts to %d (out of %d) handlers.\n",
+ nr_irqs, nr_mapped, nr_handlers);
+ set_handle_irq(plic_handle_irq);
+ return 0;
+
+out_iounmap:
+ iounmap(plic_regs);
+ return error;
+}
+
+IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
+IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 4cf06a64bc02..c49843c4d031 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -125,6 +125,7 @@ enum cpuhp_state {
CPUHP_AP_MARCO_TIMER_STARTING,
CPUHP_AP_MIPS_GIC_TIMER_STARTING,
CPUHP_AP_ARC_TIMER_STARTING,
+ CPUHP_AP_RISCV_TIMER_STARTING,
CPUHP_AP_KVM_STARTING,
CPUHP_AP_KVM_ARM_VGIC_INIT_STARTING,
CPUHP_AP_KVM_ARM_VGIC_STARTING,