diff options
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.c | 785 | ||||
| -rw-r--r-- | drivers/phy/qualcomm/phy-qcom-qmp.h | 80 |
2 files changed, 775 insertions, 90 deletions
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 1d3fe88aca2e..dbd6422a3233 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1761,6 +1761,16 @@ struct qmp_phy_cfg { const struct qmp_phy_init_tbl *pcs_misc_tbl; int pcs_misc_tbl_num; + /* Init sequence for DP PHY block link rates */ + const struct qmp_phy_init_tbl *serdes_tbl_rbr; + int serdes_tbl_rbr_num; + const struct qmp_phy_init_tbl *serdes_tbl_hbr; + int serdes_tbl_hbr_num; + const struct qmp_phy_init_tbl *serdes_tbl_hbr2; + int serdes_tbl_hbr2_num; + const struct qmp_phy_init_tbl *serdes_tbl_hbr3; + int serdes_tbl_hbr3_num; + /* clock ids to be requested */ const char * const *clk_list; int num_clks; @@ -1797,6 +1807,11 @@ struct qmp_phy_cfg { bool no_pcs_sw_reset; }; +struct qmp_phy_combo_cfg { + const struct qmp_phy_cfg *usb_cfg; + const struct qmp_phy_cfg *dp_cfg; +}; + /** * struct qmp_phy - per-lane phy descriptor * @@ -1830,6 +1845,15 @@ struct qmp_phy { struct qcom_qmp *qmp; struct reset_control *lane_rst; enum phy_mode mode; + unsigned int dp_aux_cfg; + struct phy_configure_opts_dp dp_opts; + struct qmp_phy_dp_clks *dp_clks; +}; + +struct qmp_phy_dp_clks { + struct qmp_phy *qphy; + struct clk_hw dp_link_hw; + struct clk_hw dp_pixel_hw; }; /** @@ -2477,6 +2501,295 @@ static void qcom_qmp_phy_configure(void __iomem *base, qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff); } +static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy) +{ + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qphy->cfg; + void __iomem *serdes = qphy->serdes; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl; + int serdes_tbl_num = cfg->serdes_tbl_num; + int ret; + + qcom_qmp_phy_configure(serdes, cfg->regs, serdes_tbl, serdes_tbl_num); + + if (cfg->type == PHY_TYPE_DP) { + switch (dp_opts->link_rate) { + case 1620: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_rbr, + cfg->serdes_tbl_rbr_num); + break; + case 2700: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_hbr, + cfg->serdes_tbl_hbr_num); + break; + case 5400: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_hbr2, + cfg->serdes_tbl_hbr2_num); + break; + case 8100: + qcom_qmp_phy_configure(serdes, cfg->regs, + cfg->serdes_tbl_hbr3, + cfg->serdes_tbl_hbr3_num); + break; + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + } + + + if (cfg->has_phy_com_ctrl) { + void __iomem *status; + unsigned int mask, val; + + qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET); + qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], + SERDES_START | PCS_START); + + status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS]; + mask = cfg->mask_com_pcs_ready; + + ret = readl_poll_timeout(status, val, (val & mask), 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, + "phy common block init timed-out\n"); + return ret; + } + } + + return 0; +} + +static void qcom_qmp_phy_dp_aux_init(struct qmp_phy *qphy) +{ + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + /* Turn on BIAS current for PHY/PLL */ + writel(QSERDES_V3_COM_BIAS_EN | QSERDES_V3_COM_BIAS_EN_MUX | + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL, + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); + + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_LANE_0_1_PWRDN | + DP_PHY_PD_CTL_LANE_2_3_PWRDN | DP_PHY_PD_CTL_PLL_PWRDN | + DP_PHY_PD_CTL_DP_CLAMP_EN, + qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(QSERDES_V3_COM_BIAS_EN | + QSERDES_V3_COM_BIAS_EN_MUX | QSERDES_V3_COM_CLKBUF_R_EN | + QSERDES_V3_COM_CLKBUF_L_EN | QSERDES_V3_COM_EN_SYSCLK_TX_SEL | + QSERDES_V3_COM_CLKBUF_RX_DRIVE_L, + qphy->serdes + QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN); + + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG0); + writel(0x13, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + writel(0x24, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); + writel(0x00, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG3); + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG4); + writel(0x26, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG5); + writel(0x0a, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG6); + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG7); + writel(0xbb, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG8); + writel(0x03, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG9); + qphy->dp_aux_cfg = 0; + + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK | + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK | + PHY_AUX_REQ_ERR_MASK, + qphy->pcs + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK); +} + +static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = { + { 0x00, 0x0c, 0x14, 0x19 }, + { 0x00, 0x0b, 0x12, 0xff }, + { 0x00, 0x0b, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { + { 0x08, 0x0f, 0x16, 0x1f }, + { 0x11, 0x1e, 0x1f, 0xff }, + { 0x19, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static void qcom_qmp_phy_configure_dp_tx(struct qmp_phy *qphy) +{ + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + unsigned int v_level = 0, p_level = 0; + u32 bias_en, drvr_en; + u8 voltage_swing_cfg, pre_emphasis_cfg; + int i; + + for (i = 0; i < dp_opts->lanes; i++) { + v_level = max(v_level, dp_opts->voltage[i]); + p_level = max(p_level, dp_opts->pre[i]); + } + + if (dp_opts->lanes == 1) { + bias_en = 0x3e; + drvr_en = 0x13; + } else { + bias_en = 0x3f; + drvr_en = 0x10; + } + + voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; + pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; + + /* TODO: Move check to config check */ + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) + return; + + /* Enable MUX to use Cursor values from these registers */ + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + + writel(voltage_swing_cfg, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL); + writel(pre_emphasis_cfg, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL); + writel(voltage_swing_cfg, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL); + writel(pre_emphasis_cfg, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL); + + writel(drvr_en, qphy->tx + QSERDES_V3_TX_HIGHZ_DRVR_EN); + writel(bias_en, qphy->tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); + writel(drvr_en, qphy->tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN); + writel(bias_en, qphy->tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN); +} + +static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts) +{ + const struct phy_configure_opts_dp *dp_opts = &opts->dp; + struct qmp_phy *qphy = phy_get_drvdata(phy); + + memcpy(&qphy->dp_opts, dp_opts, sizeof(*dp_opts)); + if (qphy->dp_opts.set_voltages) { + qcom_qmp_phy_configure_dp_tx(qphy); + qphy->dp_opts.set_voltages = 0; + } + + return 0; +} + +static int qcom_qmp_phy_configure_dp_phy(struct qmp_phy *qphy) +{ + const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks; + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + u32 val, phy_vco_div, status; + unsigned long pixel_freq; + + val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN; + + /* + * TODO: Assume orientation is CC1 for now and two lanes, need to + * use type-c connector to understand orientation and lanes. + * + * Otherwise val changes to be like below if this code understood + * the orientation of the type-c cable. + * + * if (lane_cnt == 4 || orientation == ORIENTATION_CC2) + * val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN; + * if (lane_cnt == 4 || orientation == ORIENTATION_CC1) + * val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; + * if (orientation == ORIENTATION_CC2) + * writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); + */ + val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN; + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + + writel(0x5c, qphy->pcs + QSERDES_V3_DP_PHY_MODE); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL); + + switch (dp_opts->link_rate) { + case 1620: + phy_vco_div = 0x1; + pixel_freq = 1620000000UL / 2; + break; + case 2700: + phy_vco_div = 0x1; + pixel_freq = 2700000000UL / 2; + break; + case 5400: + phy_vco_div = 0x2; + pixel_freq = 5400000000UL / 4; + break; + case 8100: + phy_vco_div = 0x0; + pixel_freq = 8100000000UL / 6; + break; + default: + /* Other link rates aren't supported */ + return -EINVAL; + } + writel(phy_vco_div, qphy->pcs + QSERDES_V3_DP_PHY_VCO_DIV); + + clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000); + clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq); + + writel(0x04, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG2); + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x05, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x01, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + writel(0x09, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + writel(0x20, qphy->serdes + QSERDES_V3_COM_RESETSM_CNTRL); + + if (readl_poll_timeout(qphy->serdes + QSERDES_V3_COM_C_READY_STATUS, + status, + ((status & BIT(0)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + if (readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x18, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + udelay(2000); + writel(0x19, qphy->pcs + QSERDES_V3_DP_PHY_CFG); + + return readl_poll_timeout(qphy->pcs + QSERDES_V3_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000); +} + +/* + * We need to calibrate the aux setting here as many times + * as the caller tries + */ +static int qcom_qmp_dp_phy_calibrate(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + const u8 cfg1_settings[] = { 0x13, 0x23, 0x1d }; + u8 val; + + qphy->dp_aux_cfg++; + qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings); + val = cfg1_settings[qphy->dp_aux_cfg]; + + writel(val, qphy->pcs + QSERDES_V3_DP_PHY_AUX_CFG1); + + return 0; +} + static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) { struct qcom_qmp *qmp = qphy->qmp; @@ -2531,6 +2844,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + /* Default type-c orientation, i.e CC1 */ + qphy_setbits(dp_com, QPHY_V3_DP_COM_TYPEC_CTRL, 0x02); + qphy_setbits(dp_com, QPHY_V3_DP_COM_PHY_MODE_CTRL, USB3_MODE | DP_MODE); @@ -2538,6 +2854,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) qphy_clrbits(dp_com, QPHY_V3_DP_COM_RESET_OVRD_CTRL, SW_DPPHY_RESET_MUX | SW_DPPHY_RESET | SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET); + + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SWI_CTRL, 0x03); + qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); } if (cfg->has_phy_com_ctrl) { @@ -2553,36 +2872,10 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy) cfg->pwrdn_ctrl); } - /* Serdes configuration */ - qcom_qmp_phy_configure(serdes, cfg->regs, cfg->serdes_tbl, - cfg->serdes_tbl_num); - - if (cfg->has_phy_com_ctrl) { - void __iomem *status; - unsigned int mask, val; - - qphy_clrbits(serdes, cfg->regs[QPHY_COM_SW_RESET], SW_RESET); - qphy_setbits(serdes, cfg->regs[QPHY_COM_START_CONTROL], - SERDES_START | PCS_START); - - status = serdes + cfg->regs[QPHY_COM_PCS_READY_STATUS]; - mask = cfg->mask_com_pcs_ready; - - ret = readl_poll_timeout(status, val, (val & mask), 10, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, - "phy common block init timed-out\n"); - goto err_com_init; - } - } - mutex_unlock(&qmp->phy_mutex); return 0; -err_com_init: - clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks); err_rst: while (++i < cfg->num_resets) reset_control_assert(qmp->resets[i]); @@ -2629,20 +2922,12 @@ static int qcom_qmp_phy_com_exit(struct qmp_phy *qphy) return 0; } -static int qcom_qmp_phy_enable(struct phy *phy) +static int qcom_qmp_phy_init(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); struct qcom_qmp *qmp = qphy->qmp; const struct qmp_phy_cfg *cfg = qphy->cfg; - void __iomem *tx = qphy->tx; - void __iomem *rx = qphy->rx; - void __iomem *pcs = qphy->pcs; - void __iomem *pcs_misc = qphy->pcs_misc; - void __iomem *dp_com = qmp->dp_com; - void __iomem *status; - unsigned int mask, val, ready; int ret; - dev_vdbg(qmp->dev, "Initializing QMP phy\n"); if (cfg->no_pcs_sw_reset) { @@ -2669,13 +2954,34 @@ static int qcom_qmp_phy_enable(struct phy *phy) ret = reset_control_assert(qmp->ufs_reset); if (ret) - goto err_lane_rst; + return ret; } ret = qcom_qmp_phy_com_init(qphy); if (ret) return ret; + if (cfg->type == PHY_TYPE_DP) + qcom_qmp_phy_dp_aux_init(qphy); + + return 0; +} + +static int qcom_qmp_phy_power_on(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + struct qcom_qmp *qmp = qphy->qmp; + const struct qmp_phy_cfg *cfg = qphy->cfg; + void __iomem *tx = qphy->tx; + void __iomem *rx = qphy->rx; + void __iomem *pcs = qphy->pcs; + void __iomem *pcs_misc = qphy->pcs_misc; + void __iomem *status; + unsigned int mask, val, ready; + int ret; + + qcom_qmp_phy_serdes_init(qphy); + if (cfg->has_lane_rst) { ret = reset_control_deassert(qphy->lane_rst); if (ret) { @@ -2699,13 +3005,23 @@ static int qcom_qmp_phy_enable(struct phy *phy) qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num, 2); + /* Configure special DP tx tunings */ + if (cfg->type == PHY_TYPE_DP) + qcom_qmp_phy_configure_dp_tx(qphy); + qcom_qmp_phy_configure_lane(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 1); + if (cfg->is_dual_lane_phy) qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num, 2); - qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + /* Configure link rate, swing, etc. */ + if (cfg->type == PHY_TYPE_DP) + qcom_qmp_phy_configure_dp_phy(qphy); + else + qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num); + ret = reset_control_deassert(qmp->ufs_reset); if (ret) goto err_lane_rst; @@ -2723,69 +3039,77 @@ static int qcom_qmp_phy_enable(struct phy *phy) if (cfg->has_pwrdn_delay) usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); - /* Pull PHY out of reset state */ - if (!cfg->no_pcs_sw_reset) - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - - if (cfg->has_phy_dp_com_ctrl) - qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET); - - /* start SerDes and Phy-Coding-Sublayer */ - qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - - if (cfg->type == PHY_TYPE_UFS) { - status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; - mask = PCS_READY; - ready = PCS_READY; - } else { - status = pcs + cfg->regs[QPHY_PCS_STATUS]; - mask = PHYSTATUS; - ready = 0; - } + if (cfg->type != PHY_TYPE_DP) { + /* Pull PHY out of reset state */ + if (!cfg->no_pcs_sw_reset) + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + /* start SerDes and Phy-Coding-Sublayer */ + qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + + if (cfg->type == PHY_TYPE_UFS) { + status = pcs + cfg->regs[QPHY_PCS_READY_STATUS]; + mask = PCS_READY; + ready = PCS_READY; + } else { + status = pcs + cfg->regs[QPHY_PCS_STATUS]; + mask = PHYSTATUS; + ready = 0; + } - ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, - PHY_INIT_COMPLETE_TIMEOUT); - if (ret) { - dev_err(qmp->dev, "phy initialization timed-out\n"); - goto err_pcs_ready; + ret = readl_poll_timeout(status, val, (val & mask) == ready, 10, + PHY_INIT_COMPLETE_TIMEOUT); + if (ret) { + dev_err(qmp->dev, "phy initialization timed-out\n"); + goto err_pcs_ready; + } } return 0; err_pcs_ready: - reset_control_assert(qmp->ufs_reset); clk_disable_unprepare(qphy->pipe_clk); err_clk_enable: if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); err_lane_rst: - qcom_qmp_phy_com_exit(qphy); - return ret; } -static int qcom_qmp_phy_disable(struct phy *phy) +static int qcom_qmp_phy_power_off(struct phy *phy) { struct qmp_phy *qphy = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qphy->cfg; clk_disable_unprepare(qphy->pipe_clk); - /* PHY reset */ - if (!cfg->no_pcs_sw_reset) - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); + if (cfg->type == PHY_TYPE_DP) { + /* Assert DP PHY power down */ + writel(DP_PHY_PD_CTL_PSR_PWRDN, qphy->pcs + QSERDES_V3_DP_PHY_PD_CTL); + } else { + /* PHY reset */ + if (!cfg->no_pcs_sw_reset) + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); - /* stop SerDes and Phy-Coding-Sublayer */ - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); + /* stop SerDes and Phy-Coding-Sublayer */ + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl); - /* Put PHY into POWER DOWN state: active low */ - if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { - qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], - cfg->pwrdn_ctrl); - } else { - qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, - cfg->pwrdn_ctrl); + /* Put PHY into POWER DOWN state: active low */ + if (cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL]) { + qphy_clrbits(qphy->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], + cfg->pwrdn_ctrl); + } else { + qphy_clrbits(qphy->pcs, QPHY_POWER_DOWN_CONTROL, + cfg->pwrdn_ctrl); + } } + return 0; +} + +static int qcom_qmp_phy_exit(struct phy *phy) +{ + struct qmp_phy *qphy = phy_get_drvdata(phy); + const struct qmp_phy_cfg *cfg = qphy->cfg; + if (cfg->has_lane_rst) reset_control_assert(qphy->lane_rst); @@ -2794,6 +3118,31 @@ static int qcom_qmp_phy_disable(struct phy *phy) return 0; } +static int qcom_qmp_phy_enable(struct phy *phy) +{ + int ret; + + ret = qcom_qmp_phy_init(phy); + if (ret) + return ret; + + ret = qcom_qmp_phy_power_on(phy); + if (ret) + qcom_qmp_phy_exit(phy); + + return ret; +} + +static int qcom_qmp_phy_disable(struct phy *phy) +{ + int ret; + + ret = qcom_qmp_phy_power_off(phy); + if (ret) + return ret; + return qcom_qmp_phy_exit(phy); +} + static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode) { @@ -2859,7 +3208,7 @@ static int __maybe_unused qcom_qmp_phy_runtime_suspend(struct device *dev) dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode); - /* Supported only for USB3 PHY */ + /* Supported only for USB3 PHY and luckily USB3 is the first phy */ if (cfg->type != PHY_TYPE_USB3) return 0; @@ -2885,7 +3234,7 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev) dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode); - /* Supported only for USB3 PHY */ + /* Supported only for USB3 PHY and luckily USB3 is the first phy */ if (cfg->type != PHY_TYPE_USB3) return 0; @@ -2969,7 +3318,7 @@ static int qcom_qmp_phy_clk_init(struct device *dev, const struct qmp_phy_cfg *c return devm_clk_bulk_get(dev, num, qmp->clks); } -static void phy_pipe_clk_release_provider(void *res) +static void phy_clk_release_provider(void *res) { of_clk_del_provider(res); } @@ -3026,9 +3375,202 @@ static int phy_pipe_clk_register(struct qcom_qmp *qmp, struct device_node *np) * Roll a devm action because the clock provider is the child node, but * the child node is not actually a device. */ - ret = devm_add_action(qmp->dev, phy_pipe_clk_release_provider, np); + ret = devm_add_action(qmp->dev, phy_clk_release_provider, np); if (ret) - phy_pipe_clk_release_provider(np); + phy_clk_release_provider(np); + + return ret; +} + +/* + * Display Port PLL driver block diagram for branch clocks + * + * +------------------------------+ + * | DP_VCO_CLK | + * | | + * | +-------------------+ | + * | | (DP PLL/VCO) | | + * | +---------+---------+ | + * | v | + * | +----------+-----------+ | + * | | hsclk_divsel_clk_src | | + * | +----------+-----------+ | + * +------------------------------+ + * | + * +---------<---------v------------>----------+ + * | | + * +--------v----------------+ | + * | dp_phy_pll_link_clk | | + * | link_clk | | + * +--------+----------------+ | + * | | + * | | + * v v + * Input to DISPCC block | + * for link clk, crypto clk | + * and interface clock | + * | + * | + * +--------<------------+-----------------+---<---+ + * | | | + * +----v---------+ +--------v-----+ +--------v------+ + * | vco_divided | | vco_divided | | vco_divided | + * | _clk_src | | _clk_src | | _clk_src | + * | | | | | | + * |divsel_six | | divsel_two | | divsel_four | + * +-------+------+ +-----+--------+ +--------+------+ + * | | | + * v---->----------v-------------<------v + * | + * +----------+-----------------+ + * | dp_phy_pll_vco_div_clk | + * +---------+------------------+ + * | + * v + * Input to DISPCC block + * for DP pixel clock + * + */ +static int qcom_qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + switch (req->rate) { + case 1620000000UL / 2: + case 2700000000UL / 2: + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */ + return 0; + default: + return -EINVAL; + } +} + +static unsigned long +qcom_qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + const struct qmp_phy_dp_clks *dp_clks; + const struct qmp_phy *qphy; + const struct phy_configure_opts_dp *dp_opts; + + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_pixel_hw); + qphy = dp_clks->qphy; + dp_opts = &qphy->dp_opts; + + switch (dp_opts->link_rate) { + case 1620: + return 1620000000UL / 2; + case 2700: + return 2700000000UL / 2; + case 5400: + return 5400000000UL / 4; + case 8100: + return 8100000000UL / 6; + default: + return 0; + } +} + +static const struct clk_ops qcom_qmp_dp_pixel_clk_ops = { + .determine_rate = qcom_qmp_dp_pixel_clk_determine_rate, + .recalc_rate = qcom_qmp_dp_pixel_clk_recalc_rate, +}; + +static int qcom_qmp_dp_link_clk_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + switch (req->rate) { + case 162000000: + case 270000000: + case 540000000: + case 810000000: + return 0; + default: + return -EINVAL; + } +} + +static unsigned long +qcom_qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + const struct qmp_phy_dp_clks *dp_clks; + const struct qmp_phy *qphy; + const struct phy_configure_opts_dp *dp_opts; + + dp_clks = container_of(hw, struct qmp_phy_dp_clks, dp_link_hw); + qphy = dp_clks->qphy; + dp_opts = &qphy->dp_opts; + + switch (dp_opts->link_rate) { + case 1620: + case 2700: + case 5400: + case 8100: + return dp_opts->link_rate * 100000; + default: + return 0; + } +} + +static const struct clk_ops qcom_qmp_dp_link_clk_ops = { + .determine_rate = qcom_qmp_dp_link_clk_determine_rate, + .recalc_rate = qcom_qmp_dp_link_clk_recalc_rate, +}; + +static struct clk_hw * +qcom_qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data) +{ + struct qmp_phy_dp_clks *dp_clks = data; + unsigned int idx = clkspec->args[0]; + + if (idx >= 2) { + pr_err("%s: invalid index %u\n", __func__, idx); + return ERR_PTR(-EINVAL); + } + + if (idx == 0) + return &dp_clks->dp_link_hw; + + return &dp_clks->dp_pixel_hw; +} + +static int phy_dp_clks_register(struct qcom_qmp *qmp, struct qmp_phy *qphy, + struct device_node *np) +{ + struct clk_init_data init = { }; + struct qmp_phy_dp_clks *dp_clks; + int ret; + + dp_clks = devm_kzalloc(qmp->dev, sizeof(*dp_clks), GFP_KERNEL); + if (!dp_clks) + return -ENOMEM; + + dp_clks->qphy = qphy; + qphy->dp_clks = dp_clks; + + init.ops = &qcom_qmp_dp_link_clk_ops; + init.name = "qmp_dp_phy_pll_link_clk"; + dp_clks->dp_link_hw.init = &init; + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_link_hw); + if (ret) + return ret; + + init.ops = &qcom_qmp_dp_pixel_clk_ops; + init.name = "qmp_dp_phy_pll_vco_div_clk"; + dp_clks->dp_pixel_hw.init = &init; + ret = devm_clk_hw_register(qmp->dev, &dp_clks->dp_pixel_hw); + if (ret) + return ret; + + ret = of_clk_add_hw_provider(np, qcom_qmp_dp_clks_hw_get, dp_clks); + if (ret) + return ret; + + /* + * Roll a devm action because the clock provider is the child node, but + * the child node is not actually a device. + */ + ret = devm_add_action(qmp->dev, phy_clk_release_provider, np); + if (ret) + phy_clk_release_provider(np); return ret; } @@ -3040,6 +3582,17 @@ static const struct phy_ops qcom_qmp_phy_gen_ops = { .owner = THIS_MODULE, }; +static const struct phy_ops qcom_qmp_phy_dp_ops = { + .init = qcom_qmp_phy_init, + .configure = qcom_qmp_dp_phy_configure, + .power_on = qcom_qmp_phy_power_on, + .calibrate = qcom_qmp_dp_phy_calibrate, + .power_off = qcom_qmp_phy_power_off, + .exit = qcom_qmp_phy_exit, + .set_mode = qcom_qmp_phy_set_mode, + .owner = THIS_MODULE, +}; + static const struct phy_ops qcom_qmp_pcie_ufs_ops = { .power_on = qcom_qmp_phy_enable, .power_off = qcom_qmp_phy_disable, @@ -3054,7 +3607,7 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id, struct qcom_qmp *qmp = dev_get_drvdata(dev); struct phy *generic_phy; struct qmp_phy *qphy; - const struct phy_ops *ops = &qcom_qmp_phy_gen_ops; + const struct phy_ops *ops; char prop_name[MAX_PROP_NAME]; int ret; @@ -3145,6 +3698,10 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id, if (cfg->type == PHY_TYPE_UFS || cfg->type == PHY_TYPE_PCIE) ops = &qcom_qmp_pcie_ufs_ops; + else if (cfg->type == PHY_TYPE_DP) + ops = &qcom_qmp_phy_dp_ops; + else + ops = &qcom_qmp_phy_gen_ops; generic_phy = devm_phy_create(dev, np, ops); if (IS_ERR(generic_phy)) { @@ -3228,6 +3785,10 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table); +static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = { + { } +}; + static const struct dev_pm_ops qcom_qmp_phy_pm_ops = { SET_RUNTIME_PM_OPS(qcom_qmp_phy_runtime_suspend, qcom_qmp_phy_runtime_resume, NULL) @@ -3240,8 +3801,13 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) struct device_node *child; struct phy_provider *phy_provider; void __iomem *serdes; + void __iomem *usb_serdes; + void __iomem *dp_serdes; + const struct qmp_phy_combo_cfg *combo_cfg = NULL; const struct qmp_phy_cfg *cfg; - int num, id; + const struct qmp_phy_cfg *usb_cfg; + const struct qmp_phy_cfg *dp_cfg; + int num, id, expected_phys; int ret; qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL); @@ -3253,21 +3819,45 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) /* Get the specific init parameters of QMP phy */ cfg = of_device_get_match_data(dev); - if (!cfg) - return -EINVAL; + if (!cfg) { + const struct of_device_id *match; + + match = of_match_device(qcom_qmp_combo_phy_of_match_table, dev); + if (!match) + return -EINVAL; + + combo_cfg = match->data; + if (!combo_cfg) + return -EINVAL; + + usb_cfg = combo_cfg->usb_cfg; + cfg = usb_cfg; /* Setup clks and regulators */ + } /* per PHY serdes; usually located at base address */ - serdes = devm_platform_ioremap_resource(pdev, 0); + usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(serdes)) return PTR_ERR(serdes); /* per PHY dp_com; if PHY has dp_com control block */ - if (cfg->has_phy_dp_com_ctrl) { + if (combo_cfg || cfg->has_phy_dp_com_ctrl) { qmp->dp_com = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(qmp->dp_com)) return PTR_ERR(qmp->dp_com); } + if (combo_cfg) { + /* Only two serdes for combo PHY */ + dp_serdes = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(dp_serdes)) + return PTR_ERR(dp_serdes); + + dp_cfg = combo_cfg->dp_cfg; + expected_phys = 2; + } else { + expected_phys = cfg->nlanes; + } + mutex_init(&qmp->phy_mutex); ret = qcom_qmp_phy_clk_init(dev, cfg); @@ -3288,14 +3878,13 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) num = of_get_available_child_count(dev->of_node); /* do we have a rogue child node ? */ - if (num > cfg->nlanes) + if (num > expected_phys) return -EINVAL; qmp->phys = devm_kcalloc(dev, num, sizeof(*qmp->phys), GFP_KERNEL); if (!qmp->phys) return -ENOMEM; - id = 0; pm_runtime_set_active(dev); pm_runtime_enable(dev); /* @@ -3304,7 +3893,16 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) */ pm_runtime_forbid(dev); + id = 0; for_each_available_child_of_node(dev->of_node, child) { + if (of_node_name_eq(child, "dp-phy")) { + cfg = dp_cfg; + serdes = dp_serdes; + } else if (of_node_name_eq(child, "usb3-phy")) { + cfg = usb_cfg; + serdes = usb_serdes; + } + /* Create per-lane phy */ ret = qcom_qmp_phy_create(dev, child, id, serdes, cfg); if (ret) { @@ -3324,6 +3922,13 @@ static int qcom_qmp_phy_probe(struct platform_device *pdev) "failed to register pipe clock source\n"); goto err_node_put; } + } else if (cfg->type == PHY_TYPE_DP) { + ret = phy_dp_clks_register(qmp, qmp->phys[id], child); + if (ret) { + dev_err(qmp->dev, + "failed to register DP clock source\n"); + goto err_node_put; + } } id++; } diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 904b80ab9009..b7c530088a6c 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -137,6 +137,9 @@ #define QPHY_V3_DP_COM_RESET_OVRD_CTRL 0x1c /* Only for QMP V3 PHY - QSERDES COM registers */ +#define QSERDES_V3_COM_ATB_SEL1 0x000 +#define QSERDES_V3_COM_ATB_SEL2 0x004 +#define QSERDES_V3_COM_FREQ_UPDATE 0x008 #define QSERDES_V3_COM_BG_TIMER 0x00c #define QSERDES_V3_COM_SSC_EN_CENTER 0x010 #define QSERDES_V3_COM_SSC_ADJ_PER1 0x014 @@ -146,6 +149,13 @@ #define QSERDES_V3_COM_SSC_STEP_SIZE1 0x024 #define QSERDES_V3_COM_SSC_STEP_SIZE2 0x028 #define QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN 0x034 +# define QSERDES_V3_COM_BIAS_EN 0x0001 +# define QSERDES_V3_COM_BIAS_EN_MUX 0x0002 +# define QSERDES_V3_COM_CLKBUF_R_EN 0x0004 +# define QSERDES_V3_COM_CLKBUF_L_EN 0x0008 +# define QSERDES_V3_COM_EN_SYSCLK_TX_SEL 0x0010 +# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_L 0x0020 +# define QSERDES_V3_COM_CLKBUF_RX_DRIVE_R 0x0040 #define QSERDES_V3_COM_CLK_ENABLE1 0x038 #define QSERDES_V3_COM_SYS_CLK_CTRL 0x03c #define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040 @@ -207,12 +217,36 @@ #define QSERDES_V3_COM_CMN_MODE 0x184 /* Only for QMP V3 PHY - TX registers */ +#define QSERDES_V3_TX_BIST_MODE_LANENO 0x000 +#define QSERDES_V3_TX_CLKBUF_ENABLE 0x008 +#define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c +# define DP_PHY_TXn_TX_EMP_POST1_LVL_MASK 0x001f +# define DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN 0x0020 + +#define QSERDES_V3_TX_TX_DRV_LVL 0x01c +# define DP_PHY_TXn_TX_DRV_LVL_MASK 0x001f +# define DP_PHY_TXn_TX_DRV_LVL_MUX_EN 0x0020 + +#define QSERDES_V3_TX_RESET_TSYNC_EN 0x024 +#define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028 + +#define QSERDES_V3_TX_TX_BAND 0x02c +#define QSERDES_V3_TX_SLEW_CNTL 0x030 +#define QSERDES_V3_TX_INTERFACE_SELECT 0x034 +#define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c +#define QSERDES_V3_TX_RES_CODE_LANE_RX 0x040 #define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044 #define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX 0x048 #define QSERDES_V3_TX_DEBUG_BUS_SEL 0x058 +#define QSERDES_V3_TX_TRANSCEIVER_BIAS_EN 0x05c #define QSERDES_V3_TX_HIGHZ_DRVR_EN 0x060 +#define QSERDES_V3_TX_TX_POL_INV 0x064 +#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN 0x068 #define QSERDES_V3_TX_LANE_MODE_1 0x08c #define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4 +#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN 0x0c0 +#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4 +#define QSERDES_V3_TX_VMODE_CTRL1 0x0f0 /* Only for QMP V3 PHY - RX registers */ #define QSERDES_V3_RX_UCDR_FO_GAIN 0x008 @@ -315,6 +349,52 @@ #define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG4 0x5c #define QPHY_V3_PCS_MISC_OSC_DTCT_MODE2_CONFIG5 0x60 +/* Only for QMP V3 PHY - DP PHY registers */ +#define QSERDES_V3_DP_PHY_REVISION_ID0 0x000 +#define QSERDES_V3_DP_PHY_REVISION_ID1 0x004 +#define QSERDES_V3_DP_PHY_REVISION_ID2 0x008 +#define QSERDES_V3_DP_PHY_REVISION_ID3 0x00c +#define QSERDES_V3_DP_PHY_CFG 0x010 +#define QSERDES_V3_DP_PHY_PD_CTL 0x018 +# define DP_PHY_PD_CTL_PWRDN 0x001 +# define DP_PHY_PD_CTL_PSR_PWRDN 0x002 +# define DP_PHY_PD_CTL_AUX_PWRDN 0x004 +# define DP_PHY_PD_CTL_LANE_0_1_PWRDN 0x008 +# define DP_PHY_PD_CTL_LANE_2_3_PWRDN 0x010 +# define DP_PHY_PD_CTL_PLL_PWRDN 0x020 +# define DP_PHY_PD_CTL_DP_CLAMP_EN 0x040 +#define QSERDES_V3_DP_PHY_MODE 0x01c +#define QSERDES_V3_DP_PHY_AUX_CFG0 0x020 +#define QSERDES_V3_DP_PHY_AUX_CFG1 0x024 +#define QSERDES_V3_DP_PHY_AUX_CFG2 0x028 +#define QSERDES_V3_DP_PHY_AUX_CFG3 0x02c +#define QSERDES_V3_DP_PHY_AUX_CFG4 0x030 +#define QSERDES_V3_DP_PHY_AUX_CFG5 0x034 +#define QSERDES_V3_DP_PHY_AUX_CFG6 0x038 +#define QSERDES_V3_DP_PHY_AUX_CFG7 0x03c +#define QSERDES_V3_DP_PHY_AUX_CFG8 0x040 +#define QSERDES_V3_DP_PHY_AUX_CFG9 0x044 + +#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK 0x048 +# define PHY_AUX_STOP_ERR_MASK 0x01 +# define PHY_AUX_DEC_ERR_MASK 0x02 +# define PHY_AUX_SYNC_ERR_MASK 0x04 +# define PHY_AUX_ALIGN_ERR_MASK 0x08 +# define PHY_AUX_REQ_ERR_MASK 0x10 + +#define QSERDES_V3_DP_PHY_AUX_INTERRUPT_CLEAR 0x04c +#define QSERDES_V3_DP_PHY_AUX_BIST_CFG 0x050 + +#define QSERDES_V3_DP_PHY_VCO_DIV 0x064 +#define QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL 0x06c +#define QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL 0x088 + +#define QSERDES_V3_DP_PHY_SPARE0 0x0ac +#define DP_PHY_SPARE0_MASK 0x0f +#define DP_PHY_SPARE0_ORIENTATION_INFO_SHIFT 0x04(0x0004) + +#define QSERDES_V3_DP_PHY_STATUS 0x0c0 + /* Only for QMP V4 PHY - QSERDES COM registers */ #define QSERDES_V4_COM_SSC_EN_CENTER 0x010 #define QSERDES_V4_COM_SSC_PER1 0x01c |