summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/mtd/nand/spi/core.c45
-rw-r--r--drivers/spi/spi-mem.c86
-rw-r--r--drivers/spi/spi-stm32-qspi.c86
-rw-r--r--include/linux/mtd/spinand.h22
-rw-r--r--include/linux/spi/spi-mem.h16
5 files changed, 234 insertions, 21 deletions
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 17f63f95f4a2..3131fae0c715 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -473,20 +473,26 @@ static int spinand_erase_op(struct spinand_device *spinand,
return spi_mem_exec_op(spinand->spimem, &op);
}
-static int spinand_wait(struct spinand_device *spinand, u8 *s)
+static int spinand_wait(struct spinand_device *spinand,
+ unsigned long initial_delay_us,
+ unsigned long poll_delay_us,
+ u8 *s)
{
- unsigned long timeo = jiffies + msecs_to_jiffies(400);
+ struct spi_mem_op op = SPINAND_GET_FEATURE_OP(REG_STATUS,
+ spinand->scratchbuf);
u8 status;
int ret;
- do {
- ret = spinand_read_status(spinand, &status);
- if (ret)
- return ret;
+ ret = spi_mem_poll_status(spinand->spimem, &op, STATUS_BUSY, 0,
+ initial_delay_us,
+ poll_delay_us,
+ SPINAND_WAITRDY_TIMEOUT_MS);
+ if (ret)
+ return ret;
- if (!(status & STATUS_BUSY))
- goto out;
- } while (time_before(jiffies, timeo));
+ status = *spinand->scratchbuf;
+ if (!(status & STATUS_BUSY))
+ goto out;
/*
* Extra read, just in case the STATUS_READY bit has changed
@@ -526,7 +532,10 @@ static int spinand_reset_op(struct spinand_device *spinand)
if (ret)
return ret;
- return spinand_wait(spinand, NULL);
+ return spinand_wait(spinand,
+ SPINAND_RESET_INITIAL_DELAY_US,
+ SPINAND_RESET_POLL_DELAY_US,
+ NULL);
}
static int spinand_lock_block(struct spinand_device *spinand, u8 lock)
@@ -549,7 +558,10 @@ static int spinand_read_page(struct spinand_device *spinand,
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_READ_INITIAL_DELAY_US,
+ SPINAND_READ_POLL_DELAY_US,
+ &status);
if (ret < 0)
return ret;
@@ -585,7 +597,10 @@ static int spinand_write_page(struct spinand_device *spinand,
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_WRITE_INITIAL_DELAY_US,
+ SPINAND_WRITE_POLL_DELAY_US,
+ &status);
if (!ret && (status & STATUS_PROG_FAILED))
return -EIO;
@@ -768,7 +783,11 @@ static int spinand_erase(struct nand_device *nand, const struct nand_pos *pos)
if (ret)
return ret;
- ret = spinand_wait(spinand, &status);
+ ret = spinand_wait(spinand,
+ SPINAND_ERASE_INITIAL_DELAY_US,
+ SPINAND_ERASE_POLL_DELAY_US,
+ &status);
+
if (!ret && (status & STATUS_ERASE_FAILED))
ret = -EIO;
diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
index 1513553e4080..177b3e21febf 100644
--- a/drivers/spi/spi-mem.c
+++ b/drivers/spi/spi-mem.c
@@ -6,6 +6,7 @@
* Author: Boris Brezillon <boris.brezillon@bootlin.com>
*/
#include <linux/dmaengine.h>
+#include <linux/iopoll.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
@@ -743,6 +744,91 @@ static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
return container_of(drv, struct spi_mem_driver, spidrv.driver);
}
+static int spi_mem_read_status(struct spi_mem *mem,
+ const struct spi_mem_op *op,
+ u16 *status)
+{
+ const u8 *bytes = (u8 *)op->data.buf.in;
+ int ret;
+
+ ret = spi_mem_exec_op(mem, op);
+ if (ret)
+ return ret;
+
+ if (op->data.nbytes > 1)
+ *status = ((u16)bytes[0] << 8) | bytes[1];
+ else
+ *status = bytes[0];
+
+ return 0;
+}
+
+/**
+ * spi_mem_poll_status() - Poll memory device status
+ * @mem: SPI memory device
+ * @op: the memory operation to execute
+ * @mask: status bitmask to ckeck
+ * @match: (status & mask) expected value
+ * @initial_delay_us: delay in us before starting to poll
+ * @polling_delay_us: time to sleep between reads in us
+ * @timeout_ms: timeout in milliseconds
+ *
+ * This function polls a status register and returns when
+ * (status & mask) == match or when the timeout has expired.
+ *
+ * Return: 0 in case of success, -ETIMEDOUT in case of error,
+ * -EOPNOTSUPP if not supported.
+ */
+int spi_mem_poll_status(struct spi_mem *mem,
+ const struct spi_mem_op *op,
+ u16 mask, u16 match,
+ unsigned long initial_delay_us,
+ unsigned long polling_delay_us,
+ u16 timeout_ms)
+{
+ struct spi_controller *ctlr = mem->spi->controller;
+ int ret = -EOPNOTSUPP;
+ int read_status_ret;
+ u16 status;
+
+ if (op->data.nbytes < 1 || op->data.nbytes > 2 ||
+ op->data.dir != SPI_MEM_DATA_IN)
+ return -EINVAL;
+
+ if (ctlr->mem_ops && ctlr->mem_ops->poll_status) {
+ ret = spi_mem_access_start(mem);
+ if (ret)
+ return ret;
+
+ ret = ctlr->mem_ops->poll_status(mem, op, mask, match,
+ initial_delay_us, polling_delay_us,
+ timeout_ms);
+
+ spi_mem_access_end(mem);
+ }
+
+ if (ret == -EOPNOTSUPP) {
+ if (!spi_mem_supports_op(mem, op))
+ return ret;
+
+ if (initial_delay_us < 10)
+ udelay(initial_delay_us);
+ else
+ usleep_range((initial_delay_us >> 2) + 1,
+ initial_delay_us);
+
+ ret = read_poll_timeout(spi_mem_read_status, read_status_ret,
+ (read_status_ret || ((status) & mask) == match),
+ polling_delay_us, timeout_ms * 1000, false, mem,
+ op, &status);
+ if (read_status_ret)
+ return read_status_ret;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(spi_mem_poll_status);
+
static int spi_mem_probe(struct spi_device *spi)
{
struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 7e640ccc7e77..69fd220a2894 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -36,6 +36,7 @@
#define CR_FTIE BIT(18)
#define CR_SMIE BIT(19)
#define CR_TOIE BIT(20)
+#define CR_APMS BIT(22)
#define CR_PRESC_MASK GENMASK(31, 24)
#define QSPI_DCR 0x04
@@ -53,6 +54,7 @@
#define QSPI_FCR 0x0c
#define FCR_CTEF BIT(0)
#define FCR_CTCF BIT(1)
+#define FCR_CSMF BIT(3)
#define QSPI_DLR 0x10
@@ -107,6 +109,7 @@ struct stm32_qspi {
u32 clk_rate;
struct stm32_qspi_flash flash[STM32_QSPI_MAX_NORCHIP];
struct completion data_completion;
+ struct completion match_completion;
u32 fmode;
struct dma_chan *dma_chtx;
@@ -115,6 +118,7 @@ struct stm32_qspi {
u32 cr_reg;
u32 dcr_reg;
+ unsigned long status_timeout;
/*
* to protect device configuration, could be different between
@@ -128,11 +132,20 @@ static irqreturn_t stm32_qspi_irq(int irq, void *dev_id)
struct stm32_qspi *qspi = (struct stm32_qspi *)dev_id;
u32 cr, sr;
+ cr = readl_relaxed(qspi->io_base + QSPI_CR);
sr = readl_relaxed(qspi->io_base + QSPI_SR);
+ if (cr & CR_SMIE && sr & SR_SMF) {
+ /* disable irq */
+ cr &= ~CR_SMIE;
+ writel_relaxed(cr, qspi->io_base + QSPI_CR);
+ complete(&qspi->match_completion);
+
+ return IRQ_HANDLED;
+ }
+
if (sr & (SR_TEF | SR_TCF)) {
/* disable irq */
- cr = readl_relaxed(qspi->io_base + QSPI_CR);
cr &= ~CR_TCIE & ~CR_TEIE;
writel_relaxed(cr, qspi->io_base + QSPI_CR);
complete(&qspi->data_completion);
@@ -319,6 +332,24 @@ out:
return err;
}
+static int stm32_qspi_wait_poll_status(struct stm32_qspi *qspi,
+ const struct spi_mem_op *op)
+{
+ u32 cr;
+
+ reinit_completion(&qspi->match_completion);
+ cr = readl_relaxed(qspi->io_base + QSPI_CR);
+ writel_relaxed(cr | CR_SMIE, qspi->io_base + QSPI_CR);
+
+ if (!wait_for_completion_timeout(&qspi->match_completion,
+ msecs_to_jiffies(qspi->status_timeout)))
+ return -ETIMEDOUT;
+
+ writel_relaxed(FCR_CSMF, qspi->io_base + QSPI_FCR);
+
+ return 0;
+}
+
static int stm32_qspi_get_mode(struct stm32_qspi *qspi, u8 buswidth)
{
if (buswidth == 4)
@@ -332,7 +363,7 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op)
struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
struct stm32_qspi_flash *flash = &qspi->flash[mem->spi->chip_select];
u32 ccr, cr;
- int timeout, err = 0;
+ int timeout, err = 0, err_poll_status = 0;
dev_dbg(qspi->dev, "cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n",
op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
@@ -378,6 +409,9 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op)
if (op->addr.nbytes && qspi->fmode != CCR_FMODE_MM)
writel_relaxed(op->addr.val, qspi->io_base + QSPI_AR);
+ if (qspi->fmode == CCR_FMODE_APM)
+ err_poll_status = stm32_qspi_wait_poll_status(qspi, op);
+
err = stm32_qspi_tx(qspi, op);
/*
@@ -387,7 +421,7 @@ static int stm32_qspi_send(struct spi_mem *mem, const struct spi_mem_op *op)
* byte of device (device size - fifo size). like device size is not
* knows, the prefetching is always stop.
*/
- if (err || qspi->fmode == CCR_FMODE_MM)
+ if (err || err_poll_status || qspi->fmode == CCR_FMODE_MM)
goto abort;
/* wait end of tx in indirect mode */
@@ -406,15 +440,49 @@ abort:
cr, !(cr & CR_ABORT), 1,
STM32_ABT_TIMEOUT_US);
- writel_relaxed(FCR_CTCF, qspi->io_base + QSPI_FCR);
+ writel_relaxed(FCR_CTCF | FCR_CSMF, qspi->io_base + QSPI_FCR);
- if (err || timeout)
- dev_err(qspi->dev, "%s err:%d abort timeout:%d\n",
- __func__, err, timeout);
+ if (err || err_poll_status || timeout)
+ dev_err(qspi->dev, "%s err:%d err_poll_status:%d abort timeout:%d\n",
+ __func__, err, err_poll_status, timeout);
return err;
}
+static int stm32_qspi_poll_status(struct spi_mem *mem, const struct spi_mem_op *op,
+ u16 mask, u16 match,
+ unsigned long initial_delay_us,
+ unsigned long polling_rate_us,
+ unsigned long timeout_ms)
+{
+ struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
+ int ret;
+
+ if (!spi_mem_supports_op(mem, op))
+ return -EOPNOTSUPP;
+
+ ret = pm_runtime_get_sync(qspi->dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(qspi->dev);
+ return ret;
+ }
+
+ mutex_lock(&qspi->lock);
+
+ writel_relaxed(mask, qspi->io_base + QSPI_PSMKR);
+ writel_relaxed(match, qspi->io_base + QSPI_PSMAR);
+ qspi->fmode = CCR_FMODE_APM;
+ qspi->status_timeout = timeout_ms;
+
+ ret = stm32_qspi_send(mem, op);
+ mutex_unlock(&qspi->lock);
+
+ pm_runtime_mark_last_busy(qspi->dev);
+ pm_runtime_put_autosuspend(qspi->dev);
+
+ return ret;
+}
+
static int stm32_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
{
struct stm32_qspi *qspi = spi_controller_get_devdata(mem->spi->master);
@@ -527,7 +595,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
flash->presc = presc;
mutex_lock(&qspi->lock);
- qspi->cr_reg = 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN;
+ qspi->cr_reg = CR_APMS | 3 << CR_FTHRES_SHIFT | CR_SSHIFT | CR_EN;
writel_relaxed(qspi->cr_reg, qspi->io_base + QSPI_CR);
/* set dcr fsize to max address */
@@ -607,6 +675,7 @@ static const struct spi_controller_mem_ops stm32_qspi_mem_ops = {
.exec_op = stm32_qspi_exec_op,
.dirmap_create = stm32_qspi_dirmap_create,
.dirmap_read = stm32_qspi_dirmap_read,
+ .poll_status = stm32_qspi_poll_status,
};
static int stm32_qspi_probe(struct platform_device *pdev)
@@ -661,6 +730,7 @@ static int stm32_qspi_probe(struct platform_device *pdev)
}
init_completion(&qspi->data_completion);
+ init_completion(&qspi->match_completion);
qspi->clk = devm_clk_get(dev, NULL);
if (IS_ERR(qspi->clk)) {
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index 6bb92f26833e..6988956b8492 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -170,6 +170,28 @@ struct spinand_op;
struct spinand_device;
#define SPINAND_MAX_ID_LEN 4
+/*
+ * For erase, write and read operation, we got the following timings :
+ * tBERS (erase) 1ms to 4ms
+ * tPROG 300us to 400us
+ * tREAD 25us to 100us
+ * In order to minimize latency, the min value is divided by 4 for the
+ * initial delay, and dividing by 20 for the poll delay.
+ * For reset, 5us/10us/500us if the device is respectively
+ * reading/programming/erasing when the RESET occurs. Since we always
+ * issue a RESET when the device is IDLE, 5us is selected for both initial
+ * and poll delay.
+ */
+#define SPINAND_READ_INITIAL_DELAY_US 6
+#define SPINAND_READ_POLL_DELAY_US 5
+#define SPINAND_RESET_INITIAL_DELAY_US 5
+#define SPINAND_RESET_POLL_DELAY_US 5
+#define SPINAND_WRITE_INITIAL_DELAY_US 75
+#define SPINAND_WRITE_POLL_DELAY_US 15
+#define SPINAND_ERASE_INITIAL_DELAY_US 250
+#define SPINAND_ERASE_POLL_DELAY_US 50
+
+#define SPINAND_WAITRDY_TIMEOUT_MS 400
/**
* struct spinand_id - SPI NAND id structure
diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
index 2b65c9edc34e..85e2ff7b840d 100644
--- a/include/linux/spi/spi-mem.h
+++ b/include/linux/spi/spi-mem.h
@@ -250,6 +250,9 @@ static inline void *spi_mem_get_drvdata(struct spi_mem *mem)
* the currently mapped area), and the caller of
* spi_mem_dirmap_write() is responsible for calling it again in
* this case.
+ * @poll_status: poll memory device status until (status & mask) == match or
+ * when the timeout has expired. It fills the data buffer with
+ * the last status value.
*
* This interface should be implemented by SPI controllers providing an
* high-level interface to execute SPI memory operation, which is usually the
@@ -274,6 +277,12 @@ struct spi_controller_mem_ops {
u64 offs, size_t len, void *buf);
ssize_t (*dirmap_write)(struct spi_mem_dirmap_desc *desc,
u64 offs, size_t len, const void *buf);
+ int (*poll_status)(struct spi_mem *mem,
+ const struct spi_mem_op *op,
+ u16 mask, u16 match,
+ unsigned long initial_delay_us,
+ unsigned long polling_rate_us,
+ unsigned long timeout_ms);
};
/**
@@ -369,6 +378,13 @@ devm_spi_mem_dirmap_create(struct device *dev, struct spi_mem *mem,
void devm_spi_mem_dirmap_destroy(struct device *dev,
struct spi_mem_dirmap_desc *desc);
+int spi_mem_poll_status(struct spi_mem *mem,
+ const struct spi_mem_op *op,
+ u16 mask, u16 match,
+ unsigned long initial_delay_us,
+ unsigned long polling_delay_us,
+ u16 timeout_ms);
+
int spi_mem_driver_register_with_owner(struct spi_mem_driver *drv,
struct module *owner);
generated by cgit (git 2.34.1) at 2024-05-20 16:49:21 +0000