summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CREDITS3
-rw-r--r--Documentation/devicetree/bindings/input/input.yaml7
-rw-r--r--Documentation/devicetree/bindings/mfd/actions,atc260x.yaml183
-rw-r--r--Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml76
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt99
-rw-r--r--Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml54
-rw-r--r--Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml111
-rw-r--r--Documentation/devicetree/bindings/mfd/rn5t618.txt52
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml201
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml6
-rw-r--r--Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml123
-rw-r--r--Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml4
-rw-r--r--Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml4
-rw-r--r--Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml116
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.yaml2
-rw-r--r--MAINTAINERS74
-rw-r--r--drivers/clk/clk-bd718x7.c9
-rw-r--r--drivers/extcon/Kconfig8
-rw-r--r--drivers/extcon/Makefile1
-rw-r--r--drivers/gpio/Kconfig10
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-bd71815.c185
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c7
-rw-r--r--drivers/input/misc/Kconfig11
-rw-r--r--drivers/input/misc/Makefile2
-rw-r--r--drivers/input/misc/atc260x-onkey.c305
-rw-r--r--drivers/mfd/Kconfig82
-rw-r--r--drivers/mfd/Makefile7
-rw-r--r--drivers/mfd/ab3100-core.c929
-rw-r--r--drivers/mfd/ab3100-otp.c240
-rw-r--r--drivers/mfd/ab8500-core.c20
-rw-r--r--drivers/mfd/arizona-core.c20
-rw-r--r--drivers/mfd/arizona-irq.c2
-rw-r--r--drivers/mfd/arizona-spi.c4
-rw-r--r--drivers/mfd/atc260x-core.c310
-rw-r--r--drivers/mfd/atc260x-i2c.c64
-rw-r--r--drivers/mfd/da9063-i2c.c10
-rw-r--r--drivers/mfd/ene-kb3930.c2
-rw-r--r--drivers/mfd/intel-lpss-acpi.c32
-rw-r--r--drivers/mfd/intel-lpss-pci.c46
-rw-r--r--drivers/mfd/intel-lpss.c2
-rw-r--r--drivers/mfd/intel-lpss.h4
-rw-r--r--drivers/mfd/intel-m10-bmc.c30
-rw-r--r--drivers/mfd/intel_quark_i2c_gpio.c112
-rw-r--r--drivers/mfd/lm3533-core.c2
-rw-r--r--drivers/mfd/lpc_sch.c32
-rw-r--r--drivers/mfd/max8997.c4
-rw-r--r--drivers/mfd/mfd-core.c29
-rw-r--r--drivers/mfd/ntxec.c271
-rw-r--r--drivers/mfd/rn5t618.c3
-rw-r--r--drivers/mfd/rohm-bd71828.c486
-rw-r--r--drivers/mfd/rohm-bd718x7.c43
-rw-r--r--drivers/mfd/rohm-bd9576.c189
-rw-r--r--drivers/mfd/sec-core.c14
-rw-r--r--drivers/mfd/stm32-timers.c7
-rw-r--r--drivers/mfd/stmpe.c14
-rw-r--r--drivers/pwm/Kconfig8
-rw-r--r--drivers/pwm/Makefile1
-rw-r--r--drivers/pwm/pwm-ntxec.c184
-rw-r--r--drivers/regulator/Kconfig11
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/bd71815-regulator.c652
-rw-r--r--drivers/regulator/bd71828-regulator.c51
-rw-r--r--drivers/regulator/bd718x7-regulator.c60
-rw-r--r--drivers/regulator/rohm-regulator.c23
-rw-r--r--drivers/rtc/Kconfig14
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-bd70528.c104
-rw-r--r--drivers/rtc/rtc-ntxec.c145
-rw-r--r--drivers/watchdog/Kconfig13
-rw-r--r--drivers/watchdog/Makefile1
-rw-r--r--drivers/watchdog/bd9576_wdt.c291
-rw-r--r--include/linux/mfd/ab3100.h128
-rw-r--r--include/linux/mfd/atc260x/atc2603c.h281
-rw-r--r--include/linux/mfd/atc260x/atc2609a.h308
-rw-r--r--include/linux/mfd/atc260x/core.h58
-rw-r--r--include/linux/mfd/core.h6
-rw-r--r--include/linux/mfd/da9063/registers.h3
-rw-r--r--include/linux/mfd/db8500-prcmu.h2
-rw-r--r--include/linux/mfd/intel-m10-bmc.h92
-rw-r--r--include/linux/mfd/lp87565.h3
-rw-r--r--include/linux/mfd/max8997.h8
-rw-r--r--include/linux/mfd/ntxec.h38
-rw-r--r--include/linux/mfd/rn5t618.h1
-rw-r--r--include/linux/mfd/rohm-bd71815.h562
-rw-r--r--include/linux/mfd/rohm-bd71828.h3
-rw-r--r--include/linux/mfd/rohm-bd718x7.h13
-rw-r--r--include/linux/mfd/rohm-bd957x.h140
-rw-r--r--include/linux/mfd/rohm-generic.h17
-rw-r--r--include/linux/mfd/twl.h2
-rw-r--r--include/linux/platform_data/i2c-designware.h13
-rw-r--r--sound/soc/codecs/arizona-jack.c (renamed from drivers/extcon/extcon-arizona.c)63
93 files changed, 5919 insertions, 2050 deletions
diff --git a/CREDITS b/CREDITS
index b8f964198dda..b06760f09c66 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1933,6 +1933,9 @@ N: Kukjin Kim
E: kgene@kernel.org
D: Samsung S3C, S5P and Exynos ARM architectures
+N: Milo Kim
+D: TI LP855x, LP8727 and LP8788 drivers
+
N: Sangbeom Kim
E: sbkim73@samsung.com
D: Samsung SoC Audio (ASoC) drivers
diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml
index 3fc37478c0c0..74244d21d2b3 100644
--- a/Documentation/devicetree/bindings/input/input.yaml
+++ b/Documentation/devicetree/bindings/input/input.yaml
@@ -33,4 +33,11 @@ properties:
power off automatically. Device with key pressed shutdown feature can
specify this property.
+ reset-time-sec:
+ description:
+ Duration in seconds which the key should be kept pressed for device to
+ reset automatically. Device with key pressed reset feature can specify
+ this property.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
additionalProperties: true
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
new file mode 100644
index 000000000000..dd43a0c766f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Actions Semi ATC260x Power Management IC bindings
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ - Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+description: |
+ ATC260x series PMICs integrates Audio Codec, Power Management, RTC, IR
+ and GPIO controller blocks. Currently only the PM related functionalities
+ (i.e. regulators and system power-off/reboot) for the ATC2603C and ATC2609A
+ chip variants are supported.
+ ATC2603C includes 3 programmable DC-DC converters, 9 programmable LDO
+ regulators and 1 fixed LDO regulator.
+ ATC2609A includes 5 programmable DC-DC converters and 10 programmable LDO
+ regulators.
+
+allOf:
+ - $ref: ../input/input.yaml
+
+properties:
+ compatible:
+ enum:
+ - actions,atc2603c
+ - actions,atc2609a
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-time-sec:
+ description: |
+ Duration in seconds which the key should be kept pressed for device
+ to reset automatically. The hardware default is 8. Use 0 to disable
+ this functionality.
+ enum: [0, 6, 8, 10, 12]
+
+ regulators:
+ type: object
+ description: |
+ List of child nodes specifying the regulators, depending on chip variant:
+ * ATC2603C: dcdc[1-3], ldo[1-3,5-8,11,12], switchldo1
+ * ATC2609A: dcdc[0-4], ldo[0-9]
+
+ properties:
+ compatible:
+ enum:
+ - actions,atc2603c-regulator
+ - actions,atc2609a-regulator
+
+ switchldo1:
+ type: object
+ $ref: ../regulator/regulator.yaml
+
+ properties:
+ regulator-name: true
+ regulator-boot-on: true
+ regulator-always-on: true
+ regulator-min-microvolt: true
+ regulator-max-microvolt: true
+ regulator-allow-bypass: true
+ regulator-active-discharge: true
+
+ additionalProperties: false
+
+ patternProperties:
+ "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2]|switchldo1)-supply$":
+ description: ATC260x voltage regulators supplies
+
+ "^(dcdc[0-4]|ldo[0-9]|ldo1[1-2])$":
+ type: object
+ $ref: ../regulator/regulator.yaml
+
+ properties:
+ regulator-name: true
+ regulator-boot-on: true
+ regulator-always-on: true
+ regulator-min-microvolt: true
+ regulator-max-microvolt: true
+ regulator-allow-bypass: true
+
+ additionalProperties: false
+
+ allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: actions,atc2603c-regulator
+ then:
+ patternProperties:
+ "^(dcdc[0,4]|ldo[0,4,9])(-supply)?$": false
+
+ "^(ldo|dcdc)":
+ properties:
+ regulator-allow-bypass: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: actions,atc2609a-regulator
+ then:
+ patternProperties:
+ "^(ldo1[1-2]|switchldo1)(-supply)?$": false
+
+ "^(dcdc|ldo[3-9])":
+ properties:
+ regulator-allow-bypass: false
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@65 {
+ compatible = "actions,atc2603c";
+ reg = <0x65>;
+ interrupt-parent = <&sirq>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+
+ reset-time-sec = <6>;
+
+ regulators {
+ compatible = "actions,atc2603c-regulator";
+
+ dcdc1-supply = <&reg_5v0>;
+ dcdc3-supply = <&reg_5v0>;
+ ldo5-supply = <&reg_5v0>;
+ switchldo1-supply = <&vcc>;
+
+ vdd_cpu: dcdc1 {
+ regulator-name = "VDD_CPU";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+
+ vcc: dcdc3 {
+ regulator-name = "VCC";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_3v1: ldo5 {
+ regulator-name = "VCC_3V1";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ sd_vcc: switchldo1 {
+ regulator-name = "SD_VCC";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
new file mode 100644
index 000000000000..59a630025f52
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/netronix,ntxec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Netronix Embedded Controller
+
+maintainers:
+ - Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+
+description: |
+ This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and
+ is typically implemented as a TI MSP430 microcontroller.
+
+properties:
+ compatible:
+ const: netronix,ntxec
+
+ reg:
+ items:
+ - description: The I2C address of the EC
+
+ system-power-controller:
+ type: boolean
+ description: See Documentation/devicetree/bindings/power/power-controller.txt
+
+ interrupts:
+ minItems: 1
+ description:
+ The EC can signal interrupts via a GPIO line
+
+ "#pwm-cells":
+ const: 2
+ description: |
+ Number of cells in a PWM specifier.
+
+ The following PWM channels are supported:
+ - 0: The PWM channel controlled by registers 0xa1-0xa7
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ec: embedded-controller@43 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ntxec>;
+
+ compatible = "netronix,ntxec";
+ reg = <0x43>;
+ system-power-controller;
+ interrupt-parent = <&gpio4>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ #pwm-cells = <2>;
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ec 0 50000>;
+ power-supply = <&backlight_regulator>;
+ };
+
+ backlight_regulator: regulator-dummy {
+ compatible = "regulator-fixed";
+ regulator-name = "backlight";
+ };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
deleted file mode 100644
index 9e5eba4a4f0d..000000000000
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
+++ /dev/null
@@ -1,99 +0,0 @@
-Qualcomm PM8xxx PMIC multi-function devices
-
-The PM8xxx family of Power Management ICs are used to provide regulated
-voltages and other various functionality to Qualcomm SoCs.
-
-= PROPERTIES
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8058"
- "qcom,pm8821"
- "qcom,pm8921"
-
-- #address-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 1
-
-- #size-cells:
- Usage: required
- Value type: <u32>
- Definition: must be 0
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: specifies the interrupt that indicates a subdevice
- has generated an interrupt (summary interrupt). The
- format of the specifier is defined by the binding document
- describing the node's interrupt parent.
-
-- #interrupt-cells:
- Usage: required
- Value type : <u32>
- Definition: must be 2. Specifies the number of cells needed to encode
- an interrupt source. The 1st cell contains the interrupt
- number. The 2nd cell is the trigger type and level flags
- encoded as follows:
-
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered
- 4 = active high level-sensitive
- 8 = active low level-sensitive
-
-- interrupt-controller:
- Usage: required
- Value type: <empty>
- Definition: identifies this node as an interrupt controller
-
-= SUBCOMPONENTS
-
-The PMIC contains multiple independent functions, each described in a subnode.
-The below bindings specify the set of valid subnodes.
-
-== Real-Time Clock
-
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,pm8058-rtc"
- "qcom,pm8921-rtc"
- "qcom,pm8941-rtc"
- "qcom,pm8018-rtc"
-
-- reg:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: single entry specifying the base address of the RTC registers
-
-- interrupts:
- Usage: required
- Value type: <prop-encoded-array>
- Definition: single entry specifying the RTC's alarm interrupt
-
-- allow-set-time:
- Usage: optional
- Value type: <empty>
- Definition: indicates that the setting of RTC time is allowed by
- the host CPU
-
-= EXAMPLE
-
- pmicintc: pmic@0 {
- compatible = "qcom,pm8921";
- interrupts = <104 8>;
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- reg = <0x11d>;
- interrupts = <0x27 0>;
- };
- };
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
new file mode 100644
index 000000000000..9065ec53e643
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/qcom-pm8xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8xxx PMIC multi-function devices
+
+maintainers:
+ - Satya Priya <skakit@codeaurora.org>
+
+description: |
+ The PM8xxx family of Power Management ICs are used to provide regulated
+ voltages and other various functionality to Qualcomm SoCs.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8058
+ - qcom,pm8821
+ - qcom,pm8921
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+patternProperties:
+ "rtc@[0-9a-f]+$":
+ type: object
+ $ref: "../rtc/qcom-pm8xxx-rtc.yaml"
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - interrupts
+ - '#interrupt-cells'
+ - interrupt-controller
+
+additionalProperties: false
+...
diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
new file mode 100644
index 000000000000..032a7fb0b4a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ricoh,rn5t618.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ricoh RN5T567/RN5T618/RC5T619 PMIC
+
+maintainers:
+ - Andreas Kemnade <andreas@kemnade.info>
+
+description: |
+ Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
+ integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
+ GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
+ The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
+ fuel gauge, and an ADC.
+ The RC5T619 additionally includes USB charger detection and an RTC.
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ricoh,rn5t567
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC[1-4]|LDO[1-5]|LDORTC[12])$":
+ $ref: ../regulator/regulator.yaml
+ additionalProperties: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ricoh,rn5t618
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC[1-3]|LDO[1-5]|LDORTC[12])$":
+ $ref: ../regulator/regulator.yaml
+ additionalProperties: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: ricoh,rc5t619
+ then:
+ properties:
+ regulators:
+ patternProperties:
+ "^(DCDC[1-5]|LDO[1-9]|LDO10|LDORTC[12])$":
+ $ref: ../regulator/regulator.yaml
+ additionalProperties: false
+
+properties:
+ compatible:
+ enum:
+ - ricoh,rn5t567
+ - ricoh,rn5t618
+ - ricoh,rc5t619
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ system-power-controller:
+ type: boolean
+ description: |
+ See Documentation/devicetree/bindings/power/power-controller.txt
+
+ regulators:
+ type: object
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@32 {
+ compatible = "ricoh,rn5t618";
+ reg = <0x32>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ system-power-controller;
+
+ regulators {
+ DCDC1 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ DCDC2 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
deleted file mode 100644
index 16778ea00dbc..000000000000
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Ricoh RN5T567/RN5T618 PMIC
-
-Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
-integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
-GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
-The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
-fuel gauge, and an ADC.
-The RC5T619 additionnally includes USB charger detection and an RTC.
-
-Required properties:
- - compatible: must be one of
- "ricoh,rn5t567"
- "ricoh,rn5t618"
- "ricoh,rc5t619"
- - reg: the I2C slave address of the device
-
-Optional properties:
- - interrupts: interrupt mapping for IRQ
- See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- - system-power-controller:
- See Documentation/devicetree/bindings/power/power-controller.txt
-
-Sub-nodes:
- - regulators: the node is required if the regulator functionality is
- needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
- (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
- LDO9, LDO10, LDORTC1 and LDORTC2.
- LDO7-10 are specific to RC5T619.
- The common bindings for each individual regulator can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-Example:
-
- pmic@32 {
- compatible = "ricoh,rn5t618";
- reg = <0x32>;
- interrupt-parent = <&gpio5>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
- system-power-controller;
-
- regulators {
- DCDC1 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- DCDC2 {
- regulator-min-microvolt = <1175000>;
- regulator-max-microvolt = <1175000>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
new file mode 100644
index 000000000000..fe265bcab50d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml
@@ -0,0 +1,201 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit bindings
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ BD71815AGW is a single-chip power management ICs for battery-powered
+ portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver
+ for LED and a 500 mA single-cell linear charger. Also included is a Coulomb
+ counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs.
+
+properties:
+ compatible:
+ const: rohm,bd71815
+
+ reg:
+ description:
+ I2C slave address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is the pin number and the second cell is used to specify
+ flags. See ../gpio/gpio.txt for more information.
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 0
+
+ clock-output-names:
+ const: bd71815-32k-out
+
+ rohm,clkout-open-drain:
+ description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1
+
+ rohm,charger-sense-resistor-ohms:
+ minimum: 10000000
+ maximum: 50000000
+ description: |
+ BD71827 and BD71828 have SAR ADC for measuring charging currents.
+ External sense resistor (RSENSE in data sheet) should be used. If
+ something other but 30MOhm resistor is used the resistance value
+ should be given here in Ohms.
+ default: 30000000
+
+ regulators:
+ $ref: ../regulator/rohm,bd71815-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ gpio-reserved-ranges:
+ description: |
+ Usage of BD71828 GPIO pins can be changed via OTP. This property can be
+ used to mark the pins which should not be configured for GPIO. Please see
+ the ../gpio/gpio.txt for more information.
+
+ rohm,enable-hidden-gpo:
+ description: |
+ The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the
+ data-sheet as it's location in the middle of GND pins makes it hard to
+ use on PCB. If your board has managed to use this pin you can enable the
+ second GPO by defining this property. Dont enable this if you are unsure
+ about how the E5 pin is connected on your board.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - "#clock-cells"
+ - regulators
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@4b {
+ compatible = "rohm,bd71815";
+ reg = <0x4b>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ clocks = <&osc 0>;
+ #clock-cells = <0>;
+ clock-output-names = "bd71815-32k-out";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rohm,charger-sense-resistor-ohms = <10000000>;
+
+ regulators {
+ buck1: buck1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1150000>;
+ rohm,dvs-suspend-voltage = <950000>;
+ };
+ buck2: buck2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-ramp-delay = <1250>;
+ rohm,dvs-run-voltage = <1150000>;
+ rohm,dvs-suspend-voltage = <950000>;
+ };
+ buck3: buck3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+ buck4: buck4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-always-on;
+ };
+ buck5: buck5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo1: ldo1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo2: ldo2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo3: ldo3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo4: ldo4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo5: ldo5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ ldo6: ldodvref {
+ regulator-name = "ldodvref";
+ regulator-always-on;
+ };
+ ldo7: ldolpsr {
+ regulator-name = "ldolpsr";
+ regulator-always-on;
+ };
+
+ boost: wled {
+ regulator-name = "wled";
+ regulator-min-microamp = <10>;
+ regulator-max-microamp = <25000>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
index 3a6a1a26e2b3..8380166d176c 100644
--- a/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml
@@ -44,6 +44,12 @@ properties:
clock-output-names:
const: bd71828-32k-out
+ rohm,clkout-open-drain:
+ description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 1
+
rohm,charger-sense-resistor-ohms:
minimum: 10000000
maximum: 50000000
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
new file mode 100644
index 000000000000..6483860da955
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ BD9576MUF and BD9573MUF are power management ICs primarily intended for
+ powering the R-Car series processors.
+ The IC provides 6 power outputs with configurable sequencing and safety
+ monitoring. A watchdog logic with slow ping/windowed modes is also included.
+
+properties:
+ compatible:
+ enum:
+ - rohm,bd9576
+ - rohm,bd9573
+
+ reg:
+ description:
+ I2C slave address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ rohm,vout1-en-low:
+ description:
+ BD9576 and BD9573 VOUT1 regulator enable state can be individually
+ controlled by a GPIO. This is dictated by state of vout1-en pin during
+ the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1
+ enable sate is controlled via this pin. Set this property if vout1-en
+ is wired to be down at PMIC start-up.
+ type: boolean
+
+ rohm,vout1-en-gpios:
+ description:
+ GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF
+ state control.
+ maxItems: 1
+
+ rohm,ddr-sel-low:
+ description:
+ The BD9576 and BD9573 output voltage for DDR can be selected by setting
+ the ddr-sel pin low or high. Set this property if ddr-sel is grounded.
+ type: boolean
+
+ rohm,watchdog-enable-gpios:
+ description: The GPIO line used to enable the watchdog.
+ maxItems: 1
+
+ rohm,watchdog-ping-gpios:
+ description: The GPIO line used to ping the watchdog.
+ maxItems: 1
+
+ rohm,hw-timeout-ms:
+ maxItems: 2
+ description:
+ Watchog timeout in milliseconds. If single value is given it is
+ the maximum timeout. Eg. if pinging watchdog is not done within this time
+ limit the watchdog will be triggered. If two values are given watchdog
+ is configured in "window mode". Then first value is limit for short-ping
+ Eg. if watchdog is pinged sooner than that the watchdog will trigger.
+ When two values is given the second value is the maximum timeout.
+ # (HW) minimum for short timeout is 2ms, maximum 220 ms.
+ # (HW) minimum for max timeout is 4ms, maximum 4416 ms.
+
+ regulators:
+ $ref: ../regulator/rohm,bd9576-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@30 {
+ compatible = "rohm,bd9576";
+ reg = <0x30>;
+ rohm,vout1-en-low;
+ rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ rohm,ddr-sel-low;
+ rohm,watchdog-enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ rohm,watchdog-ping-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+ rohm,hw-timeout-ms = <150>, <2300>;
+
+ regulators {
+ boost1: regulator-vd50 {
+ regulator-name = "VD50";
+ };
+ buck1: regulator-vd18 {
+ regulator-name = "VD18";
+ };
+ buck2: regulator-vdddr {
+ regulator-name = "VDDDR";
+ };
+ buck3: regulator-vd10 {
+ regulator-name = "VD10";
+ };
+ ldo: regulator-voutl1 {
+ regulator-name = "VOUTL1";
+ };
+ sw: regulator-vouts1 {
+ regulator-name = "VOUTS1";
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
index c4fc5345d38d..f6cac4b1079c 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87524-q1.yaml
@@ -17,6 +17,10 @@ properties:
description: I2C slave address
const: 0x60
+ reset-gpios:
+ description: GPIO connected to NRST pin (active low reset, pin 20)
+ maxItems: 1
+
gpio-controller: true
'#gpio-cells':
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
index a7e57c0913e1..dc5a29b5ef7d 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87561-q1.yaml
@@ -17,6 +17,10 @@ properties:
description: I2C slave address
const: 0x60
+ reset-gpios:
+ description: GPIO connected to NRST pin (active low reset, pin 20)
+ maxItems: 1
+
gpio-controller: true
'#gpio-cells':
diff --git a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
index 1da6d6a958c9..48d4d53c25f9 100644
--- a/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,lp87565-q1.yaml
@@ -19,6 +19,10 @@ properties:
description: I2C slave address
const: 0x60
+ reset-gpios:
+ description: GPIO connected to NRST pin (active low reset, pin 20)
+ maxItems: 1
+
gpio-controller: true
'#gpio-cells':
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
new file mode 100644
index 000000000000..7d0adb74a396
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71815 Power Management Integrated Circuit regulators
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ This module is part of the ROHM BD718215 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ The valid names for BD71815 regulator nodes are
+ buck1, buck2, buck3, buck4, buck5,
+ ldo1, ldo2, ldo3, ldo4, ldo5,
+ ldodvref, ldolpsr, wled
+
+properties:
+ wled:
+ type: object
+ description:
+ properties for wled regulator
+ $ref: regulator.yaml#
+
+ properties:
+ regulator-name:
+ const: wled
+
+patternProperties:
+ "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$":
+ type: object
+ description:
+ Properties for single LDO/BUCK regulator.
+ $ref: regulator.yaml#
+
+ properties:
+ regulator-name:
+ pattern: "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$"
+ description:
+ should be "ldo1", ..., "ldo5", "buck1", ..., "buck5" and "ldolpsr"
+ for ldolpsr regulator, "ldodvref" for ldodvref reglator.
+
+ rohm,vsel-gpios:
+ description:
+ GPIO used to control ldo4 state (when ldo4 is controlled by GPIO).
+
+ rohm,dvs-run-voltage:
+ description:
+ PMIC "RUN" state voltage in uV when PMIC HW states are used. See
+ comments below for bucks/LDOs which support this. 0 means
+ regulator should be disabled at RUN state.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-snvs-voltage:
+ description:
+ Whether to keep regulator enabled at "SNVS" state or not.
+ 0 means regulator should be disabled at SNVS state, non zero voltage
+ keeps regulator enabled. BD71815 does not change voltage level
+ when PMIC transitions to SNVS.SNVS voltage depends on the previous
+ state (from which the PMIC transitioned to SNVS).
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-suspend-voltage:
+ description:
+ PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
+ comments below for bucks/LDOs which support this. 0 means
+ regulator should be disabled at SUSPEND state.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
+
+ rohm,dvs-lpsr-voltage:
+ description:
+ PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
+ comments below for bucks/LDOs which support this. 0 means
+ regulator should be disabled at LPSR state.
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ minimum: 0
+ maximum: 3300000
+
+ # Bucks 1 and 2 support giving separate voltages for operational states
+ # (RUN /CLEAN according to data-sheet) and non operational states
+ # (LPSR/SUSPEND). The voltage is automatically changed when HW
+ # state changes. Omitting these properties from bucks 1 and 2 leave
+ # buck voltages to not be toggled by HW state. Enable status may still
+ # be toggled by state changes depending on HW default settings.
+ #
+ # Bucks 3-5 and ldos 1-5 support setting the RUN state voltage here.
+ # Given RUN voltage is used at all states if regulator is enabled at
+ # given state.
+ # Values given for other states are regarded as enable/disable at
+ # given state (see below).
+ #
+ # All regulators except WLED support specifying enable/disable status
+ # for each of the HW states (RUN/SNVS/SUSPEND/LPSR). HW defaults can
+ # be overridden by setting voltage to 0 (regulator disabled at given
+ # state) or non-zero (regulator enabled at given state). Please note
+ # that setting non zero voltages for bucks 1/2 will also enable voltage
+ # changes according to state change.
+
+ required:
+ - regulator-name
+
+ unevaluatedProperties: false
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index b0b83635e0b5..99a72a480d32 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -772,6 +772,8 @@ patternProperties:
description: Broadcom Corporation (formerly NetLogic Microsystems)
"^netron-dy,.*":
description: Netron DY
+ "^netronix,.*":
+ description: Netronix, Inc.
"^netxeon,.*":
description: Shenzhen Netxeon Technology CO., LTD
"^neweast,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index a938f79695a5..bccfb16e3d98 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2894,6 +2894,18 @@ W: http://www.openaoe.org/
F: Documentation/admin-guide/aoe/
F: drivers/block/aoe/
+ATC260X PMIC MFD DRIVER
+M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+L: linux-actions@lists.infradead.org
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
+F: drivers/input/misc/atc260x-onkey.c
+F: drivers/mfd/atc260*
+F: drivers/power/reset/atc260x-poweroff.c
+F: drivers/regulator/atc260x-regulator.c
+F: include/linux/mfd/atc260x/*
+
ATHEROS 71XX/9XXX GPIO DRIVER
M: Alban Bedel <albeu@free.fr>
S: Maintained
@@ -9221,6 +9233,26 @@ F: include/linux/mei_cl_bus.h
F: include/uapi/linux/mei.h
F: samples/mei/*
+INTEL MAX 10 BMC MFD DRIVER
+M: Xu Yilun <yilun.xu@intel.com>
+R: Tom Rix <trix@redhat.com>
+S: Maintained
+F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+F: Documentation/hwmon/intel-m10-bmc-hwmon.rst
+F: drivers/hwmon/intel-m10-bmc-hwmon.c
+F: drivers/mfd/intel-m10-bmc.c
+F: include/linux/mfd/intel-m10-bmc.h
+
+INTEL MAX 10 BMC MFD DRIVER
+M: Xu Yilun <yilun.xu@intel.com>
+R: Tom Rix <trix@redhat.com>
+S: Maintained
+F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc
+F: Documentation/hwmon/intel-m10-bmc-hwmon.rst
+F: drivers/hwmon/intel-m10-bmc-hwmon.c
+F: drivers/mfd/intel-m10-bmc.c
+F: include/linux/mfd/intel-m10-bmc.h
+
INTEL MENLOW THERMAL DRIVER
M: Sujith Thomas <sujith.thomas@intel.com>
L: platform-driver-x86@vger.kernel.org
@@ -12543,6 +12575,15 @@ F: include/net/netrom.h
F: include/uapi/linux/netrom.h
F: net/netrom/
+NETRONIX EMBEDDED CONTROLLER
+M: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/netronix,ntxec.yaml
+F: drivers/mfd/ntxec.c
+F: drivers/pwm/pwm-ntxec.c
+F: drivers/rtc/rtc-ntxec.c
+F: include/linux/mfd/ntxec.h
+
NETRONOME ETHERNET DRIVERS
M: Simon Horman <simon.horman@netronome.com>
R: Jakub Kicinski <kuba@kernel.org>
@@ -15634,20 +15675,27 @@ F: Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
F: Documentation/devicetree/bindings/regulator/rohm,bd70528-regulator.txt
F: drivers/clk/clk-bd718x7.c
F: drivers/gpio/gpio-bd70528.c
+F: drivers/gpio/gpio-bd71815.c
F: drivers/gpio/gpio-bd71828.c
F: drivers/mfd/rohm-bd70528.c
F: drivers/mfd/rohm-bd71828.c
F: drivers/mfd/rohm-bd718x7.c
+F: drivers/mfd/rohm-bd9576.c
F: drivers/power/supply/bd70528-charger.c
F: drivers/regulator/bd70528-regulator.c
+F: drivers/regulator/bd71815-regulator.c
F: drivers/regulator/bd71828-regulator.c
F: drivers/regulator/bd718x7-regulator.c
+F: drivers/regulator/bd9576-regulator.c
F: drivers/regulator/rohm-regulator.c
F: drivers/rtc/rtc-bd70528.c
F: drivers/watchdog/bd70528_wdt.c
+F: drivers/watchdog/bd9576_wdt.c
F: include/linux/mfd/rohm-bd70528.h
+F: include/linux/mfd/rohm-bd71815.h
F: include/linux/mfd/rohm-bd71828.h
F: include/linux/mfd/rohm-bd718x7.h
+F: include/linux/mfd/rohm-bd957x.h
F: include/linux/mfd/rohm-generic.h
F: include/linux/mfd/rohm-shared.h
@@ -18147,29 +18195,6 @@ S: Maintained
F: sound/soc/codecs/isabelle*
F: sound/soc/codecs/lm49453*
-TI LP855x BACKLIGHT DRIVER
-M: Milo Kim <milo.kim@ti.com>
-S: Maintained
-F: Documentation/driver-api/backlight/lp855x-driver.rst
-F: drivers/video/backlight/lp855x_bl.c
-F: include/linux/platform_data/lp855x.h
-
-TI LP8727 CHARGER DRIVER
-M: Milo Kim <milo.kim@ti.com>
-S: Maintained
-F: drivers/power/supply/lp8727_charger.c
-F: include/linux/platform_data/lp8727.h
-
-TI LP8788 MFD DRIVER
-M: Milo Kim <milo.kim@ti.com>
-S: Maintained
-F: drivers/iio/adc/lp8788_adc.c
-F: drivers/leds/leds-lp8788.c
-F: drivers/mfd/lp8788*.c
-F: drivers/power/supply/lp8788-charger.c
-F: drivers/regulator/lp8788-*.c
-F: include/linux/mfd/lp8788*.h
-
TI NETCP ETHERNET DRIVER
M: Wingman Kwok <w-kwok2@ti.com>
M: Murali Karicheri <m-karicheri2@ti.com>
@@ -19587,7 +19612,6 @@ F: Documentation/devicetree/bindings/sound/wlf,arizona.yaml
F: Documentation/hwmon/wm83??.rst
F: arch/arm/mach-s3c/mach-crag6410*
F: drivers/clk/clk-wm83*.c
-F: drivers/extcon/extcon-arizona.c
F: drivers/gpio/gpio-*wm*.c
F: drivers/gpio/gpio-arizona.c
F: drivers/hwmon/wm83??-hwmon.c
@@ -19611,7 +19635,7 @@ F: include/linux/mfd/wm8400*
F: include/linux/regulator/arizona*
F: include/linux/wm97xx.h
F: include/sound/wm????.h
-F: sound/soc/codecs/arizona.?
+F: sound/soc/codecs/arizona*
F: sound/soc/codecs/cs47l24*
F: sound/soc/codecs/wm*
diff --git a/drivers/clk/clk-bd718x7.c b/drivers/clk/clk-bd718x7.c
index 17d90e09f1c0..d9e70e506d18 100644
--- a/drivers/clk/clk-bd718x7.c
+++ b/drivers/clk/clk-bd718x7.c
@@ -13,6 +13,8 @@
#include <linux/regmap.h>
/* clk control registers */
+/* BD71815 */
+#define BD71815_REG_OUT32K 0x1d
/* BD70528 */
#define BD70528_REG_OUT32K 0x2c
/* BD71828 */
@@ -118,6 +120,10 @@ static int bd71837_clk_probe(struct platform_device *pdev)
c->reg = BD70528_REG_OUT32K;
c->mask = CLK_OUT_EN_MASK;
break;
+ case ROHM_CHIP_TYPE_BD71815:
+ c->reg = BD71815_REG_OUT32K;
+ c->mask = CLK_OUT_EN_MASK;
+ break;
default:
dev_err(&pdev->dev, "Unknown clk chip\n");
return -EINVAL;
@@ -146,6 +152,7 @@ static const struct platform_device_id bd718x7_clk_id[] = {
{ "bd71847-clk", ROHM_CHIP_TYPE_BD71847 },
{ "bd70528-clk", ROHM_CHIP_TYPE_BD70528 },
{ "bd71828-clk", ROHM_CHIP_TYPE_BD71828 },
+ { "bd71815-clk", ROHM_CHIP_TYPE_BD71815 },
{ },
};
MODULE_DEVICE_TABLE(platform, bd718x7_clk_id);
@@ -161,6 +168,6 @@ static struct platform_driver bd71837_clk = {
module_platform_driver(bd71837_clk);
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
-MODULE_DESCRIPTION("BD71837/BD71847/BD70528 chip clk driver");
+MODULE_DESCRIPTION("BD718(15/18/28/37/47/50) and BD70528 chip clk driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:bd718xx-clk");
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index af58ebca2bf6..e3db936becfd 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -21,14 +21,6 @@ config EXTCON_ADC_JACK
help
Say Y here to enable extcon device driver based on ADC values.
-config EXTCON_ARIZONA
- tristate "Wolfson Arizona EXTCON support"
- depends on MFD_ARIZONA && INPUT && SND_SOC
- help
- Say Y here to enable support for external accessory detection
- with Wolfson Arizona devices. These are audio CODECs with
- advanced audio accessory detection support.
-
config EXTCON_AXP288
tristate "X-Power AXP288 EXTCON support"
depends on MFD_AXP20X && USB_SUPPORT && X86 && ACPI
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index fe10a1b7d18b..1b390d934ca9 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -6,7 +6,6 @@
obj-$(CONFIG_EXTCON) += extcon-core.o
extcon-core-objs += extcon.o devres.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
-obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o
obj-$(CONFIG_EXTCON_FSA9480) += extcon-fsa9480.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3607ec4c2e8..d3b3de514f6e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1105,6 +1105,16 @@ config GPIO_BD70528
This driver can also be built as a module. If so, the module
will be called gpio-bd70528.
+config GPIO_BD71815
+ tristate "ROHM BD71815 PMIC GPIO support"
+ depends on MFD_ROHM_BD71828
+ help
+ Support for GPO(s) on ROHM BD71815 PMIC. There are two GPOs
+ available on the ROHM PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-bd71815.
+
config GPIO_BD71828
tristate "ROHM BD71828 GPIO support"
depends on MFD_ROHM_BD71828
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c58a90a3c3b1..4c12f31db31f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
obj-$(CONFIG_GPIO_BCM_XGS_IPROC) += gpio-xgs-iproc.o
obj-$(CONFIG_GPIO_BD70528) += gpio-bd70528.o
+obj-$(CONFIG_GPIO_BD71815) += gpio-bd71815.o
obj-$(CONFIG_GPIO_BD71828) += gpio-bd71828.o
obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
diff --git a/drivers/gpio/gpio-bd71815.c b/drivers/gpio/gpio-bd71815.c
new file mode 100644
index 000000000000..08ff2857256f
--- /dev/null
+++ b/drivers/gpio/gpio-bd71815.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support to GPOs on ROHM BD71815
+ * Copyright 2021 ROHM Semiconductors.
+ * Author: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ *
+ * Copyright 2014 Embest Technology Co. Ltd. Inc.
+ * Author: yanglsh@embest-tech.com
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+/* For the BD71815 register definitions */
+#include <linux/mfd/rohm-bd71815.h>
+
+struct bd71815_gpio {
+ /* chip.parent points the MFD which provides DT node and regmap */
+ struct gpio_chip chip;
+ /* dev points to the platform device for devm and prints */
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+static int bd71815gpo_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct bd71815_gpio *bd71815 = gpiochip_get_data(chip);
+ int ret, val;
+
+ ret = regmap_read(bd71815->regmap, BD71815_REG_GPO, &val);
+ if (ret)
+ return ret;
+
+ return (val >> offset) & 1;
+}
+
+static void bd71815gpo_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct bd71815_gpio *bd71815 = gpiochip_get_data(chip);
+ int ret, bit;
+
+ bit = BIT(offset);
+
+ if (value)
+ ret = regmap_set_bits(bd71815->regmap, BD71815_REG_GPO, bit);
+ else
+ ret = regmap_clear_bits(bd71815->regmap, BD71815_REG_GPO, bit);
+
+ if (ret)
+ dev_warn(bd71815->dev, "failed to toggle GPO\n");
+}
+
+static int bd71815_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
+ unsigned long config)
+{
+ struct bd71815_gpio *bdgpio = gpiochip_get_data(chip);
+
+ switch (pinconf_to_config_param(config)) {
+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+ return regmap_update_bits(bdgpio->regmap,
+ BD71815_REG_GPO,
+ BD71815_GPIO_DRIVE_MASK << offset,
+ BD71815_GPIO_OPEN_DRAIN << offset);
+ case PIN_CONFIG_DRIVE_PUSH_PULL:
+ return regmap_update_bits(bdgpio->regmap,
+ BD71815_REG_GPO,
+ BD71815_GPIO_DRIVE_MASK << offset,
+ BD71815_GPIO_CMOS << offset);
+ default:
+ break;
+ }
+ return -ENOTSUPP;
+}
+
+/* BD71815 GPIO is actually GPO */
+static int bd71815gpo_direction_get(struct gpio_chip *gc, unsigned int offset)
+{
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+/* Template for GPIO chip */
+static const struct gpio_chip bd71815gpo_chip = {
+ .label = "bd71815",
+ .owner = THIS_MODULE,
+ .get = bd71815gpo_get,
+ .get_direction = bd71815gpo_direction_get,
+ .set = bd71815gpo_set,
+ .set_config = bd71815_gpio_set_config,
+ .can_sleep = true,
+};
+
+#define BD71815_TWO_GPIOS GENMASK(1, 0)
+#define BD71815_ONE_GPIO BIT(0)
+
+/*
+ * Sigh. The BD71815 and BD71817 were originally designed to support two GPO
+ * pins. At some point it was noticed the second GPO pin which is the E5 pin
+ * located at the center of IC is hard to use on PCB (due to the location). It
+ * was decided to not promote this second GPO and the pin is marked as GND in
+ * the datasheet. The functionality is still there though! I guess driving a GPO
+ * connected to the ground is a bad idea. Thus we do not support it by default.
+ * OTOH - the original driver written by colleagues at Embest did support
+ * controlling this second GPO. It is thus possible this is used in some of the
+ * products.
+ *
+ * This driver does not by default support configuring this second GPO
+ * but allows using it by providing the DT property
+ * "rohm,enable-hidden-gpo".
+ */
+static int bd71815_init_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ if (ngpios != 2)
+ return 0;
+
+ if (gc->parent && device_property_present(gc->parent,
+ "rohm,enable-hidden-gpo"))
+ *valid_mask = BD71815_TWO_GPIOS;
+ else
+ *valid_mask = BD71815_ONE_GPIO;
+
+ return 0;
+}
+
+static int gpo_bd71815_probe(struct platform_device *pdev)
+{
+ struct bd71815_gpio *g;
+ struct device *parent, *dev;
+
+ /*
+ * Bind devm lifetime to this platform device => use dev for devm.
+ * also the prints should originate from this device.
+ */
+ dev = &pdev->dev;
+ /* The device-tree and regmap come from MFD => use parent for that */
+ parent = dev->parent;
+
+ g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
+ if (!g)
+ return -ENOMEM;
+
+ g->chip = bd71815gpo_chip;
+
+ /*
+ * FIXME: As writing of this the sysfs interface for GPIO control does
+ * not respect the valid_mask. Do not trust it but rather set the ngpios
+ * to 1 if "rohm,enable-hidden-gpo" is not given.
+ *
+ * This check can be removed later if the sysfs export is fixed and
+ * if the fix is backported.
+ *
+ * For now it is safest to just set the ngpios though.
+ */
+ if (device_property_present(parent, "rohm,enable-hidden-gpo"))
+ g->chip.ngpio = 2;
+ else
+ g->chip.ngpio = 1;
+
+ g->chip.init_valid_mask = bd71815_init_valid_mask;
+ g->chip.base = -1;
+ g->chip.parent = parent;
+ g->regmap = dev_get_regmap(parent, NULL);
+ g->dev = dev;
+
+ return devm_gpiochip_add_data(dev, &g->chip, g);
+}
+
+static struct platform_driver gpo_bd71815_driver = {
+ .driver = {
+ .name = "bd71815-gpo",
+ },
+ .probe = gpo_bd71815_probe,
+};
+module_platform_driver(gpo_bd71815_driver);
+
+MODULE_ALIAS("platform:bd71815-gpo");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_AUTHOR("Peter Yang <yanglsh@embest-tech.com>");
+MODULE_DESCRIPTION("GPO interface for BD71815");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0dfeb2d11603..4b37f28ec0c6 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -22,7 +22,6 @@
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/platform_data/i2c-designware.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
@@ -206,7 +205,6 @@ static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
- struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct i2c_adapter *adap;
struct dw_i2c_dev *dev;
struct i2c_timings *t;
@@ -236,10 +234,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
reset_control_deassert(dev->rst);
t = &dev->timings;
- if (pdata)
- t->bus_freq_hz = pdata->i2c_scl_freq;
- else
- i2c_parse_fw_timings(&pdev->dev, t, false);
+ i2c_parse_fw_timings(&pdev->dev, t, false);
i2c_dw_adjust_bus_speed(dev);
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ad1b6c90bc4d..7237dc440b98 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -94,6 +94,17 @@ config INPUT_ARIZONA_HAPTICS
To compile this driver as a module, choose M here: the
module will be called arizona-haptics.
+config INPUT_ATC260X_ONKEY
+ tristate "Actions Semi ATC260x PMIC ONKEY"
+ depends on MFD_ATC260X
+ help
+ Support the ONKEY of ATC260x PMICs as an input device reporting
+ power button status. ONKEY can be used to wakeup from low power
+ modes and force a reset on long press.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atc260x-onkey.
+
config INPUT_ATMEL_CAPTOUCH
tristate "Atmel Capacitive Touch Button Driver"
depends on OF || COMPILE_TEST
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 7f202ba8f775..46db664a8bc4 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o
obj-$(CONFIG_INPUT_APANEL) += apanel.o
obj-$(CONFIG_INPUT_ARIEL_PWRBUTTON) += ariel-pwrbutton.o
obj-$(CONFIG_INPUT_ARIZONA_HAPTICS) += arizona-haptics.o
+obj-$(CONFIG_INPUT_ATC260X_ONKEY) += atc260x-onkey.o
obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o
obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o
obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH) += atmel_captouch.o
@@ -86,4 +87,3 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
-
diff --git a/drivers/input/misc/atc260x-onkey.c b/drivers/input/misc/atc260x-onkey.c
new file mode 100644
index 000000000000..999aabf9dcbd
--- /dev/null
+++ b/drivers/input/misc/atc260x-onkey.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Onkey driver for Actions Semi ATC260x PMICs.
+ *
+ * Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* <2s for short press, >2s for long press */
+#define KEY_PRESS_TIME_SEC 2
+
+/* Driver internals */
+enum atc260x_onkey_reset_status {
+ KEY_RESET_HW_DEFAULT,
+ KEY_RESET_DISABLED,
+ KEY_RESET_USER_SEL,
+};
+
+struct atc260x_onkey_params {
+ u32 reg_int_ctl;
+ u32 kdwn_state_bm;
+ u32 long_int_pnd_bm;
+ u32 short_int_pnd_bm;
+ u32 kdwn_int_pnd_bm;
+ u32 press_int_en_bm;
+ u32 kdwn_int_en_bm;
+ u32 press_time_bm;
+ u32 reset_en_bm;
+ u32 reset_time_bm;
+};
+
+struct atc260x_onkey {
+ struct atc260x *atc260x;
+ const struct atc260x_onkey_params *params;
+ struct input_dev *input_dev;
+ struct delayed_work work;
+ int irq;
+};
+
+static const struct atc260x_onkey_params atc2603c_onkey_params = {
+ .reg_int_ctl = ATC2603C_PMU_SYS_CTL2,
+ .long_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS,
+ .short_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS,
+ .kdwn_int_pnd_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD,
+ .press_int_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN,
+ .kdwn_int_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN,
+ .kdwn_state_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS,
+ .press_time_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+ .reset_en_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN,
+ .reset_time_bm = ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+};
+
+static const struct atc260x_onkey_params atc2609a_onkey_params = {
+ .reg_int_ctl = ATC2609A_PMU_SYS_CTL2,
+ .long_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS,
+ .short_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS,
+ .kdwn_int_pnd_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD,
+ .press_int_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN,
+ .kdwn_int_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN,
+ .kdwn_state_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS,
+ .press_time_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+ .reset_en_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN,
+ .reset_time_bm = ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+};
+
+static int atc2603x_onkey_hw_init(struct atc260x_onkey *onkey,
+ enum atc260x_onkey_reset_status reset_status,
+ u32 reset_time, u32 press_time)
+{
+ u32 reg_bm, reg_val;
+
+ reg_bm = onkey->params->long_int_pnd_bm |
+ onkey->params->short_int_pnd_bm |
+ onkey->params->kdwn_int_pnd_bm |
+ onkey->params->press_int_en_bm |
+ onkey->params->kdwn_int_en_bm;
+
+ reg_val = reg_bm | press_time;
+ reg_bm |= onkey->params->press_time_bm;
+
+ if (reset_status == KEY_RESET_DISABLED) {
+ reg_bm |= onkey->params->reset_en_bm;
+ } else if (reset_status == KEY_RESET_USER_SEL) {
+ reg_bm |= onkey->params->reset_en_bm |
+ onkey->params->reset_time_bm;
+ reg_val |= onkey->params->reset_en_bm | reset_time;
+ }
+
+ return regmap_update_bits(onkey->atc260x->regmap,
+ onkey->params->reg_int_ctl, reg_bm, reg_val);
+}
+
+static void atc260x_onkey_query(struct atc260x_onkey *onkey)
+{
+ u32 reg_bits;
+ int ret, key_down;
+
+ ret = regmap_read(onkey->atc260x->regmap,
+ onkey->params->reg_int_ctl, &key_down);
+ if (ret) {
+ key_down = 1;
+ dev_err(onkey->atc260x->dev,
+ "Failed to read onkey status: %d\n", ret);
+ } else {
+ key_down &= onkey->params->kdwn_state_bm;
+ }
+
+ /*
+ * The hardware generates interrupt only when the onkey pin is
+ * asserted. Hence, the deassertion of the pin is simulated through
+ * work queue.
+ */
+ if (key_down) {
+ schedule_delayed_work(&onkey->work, msecs_to_jiffies(200));
+ return;
+ }
+
+ /*
+ * The key-down status bit is cleared when the On/Off button
+ * is released.
+ */
+ input_report_key(onkey->input_dev, KEY_POWER, 0);
+ input_sync(onkey->input_dev);
+
+ reg_bits = onkey->params->long_int_pnd_bm |
+ onkey->params->short_int_pnd_bm |
+ onkey->params->kdwn_int_pnd_bm |
+ onkey->params->press_int_en_bm |
+ onkey->params->kdwn_int_en_bm;
+
+ /* Clear key press pending events and enable key press interrupts. */
+ regmap_update_bits(onkey->atc260x->regmap, onkey->params->reg_int_ctl,
+ reg_bits, reg_bits);
+}
+
+static void atc260x_onkey_work(struct work_struct *work)
+{
+ struct atc260x_onkey *onkey = container_of(work, struct atc260x_onkey,
+ work.work);
+ atc260x_onkey_query(onkey);
+}
+
+static irqreturn_t atc260x_onkey_irq(int irq, void *data)
+{
+ struct atc260x_onkey *onkey = data;
+ int ret;
+
+ /* Disable key press interrupts. */
+ ret = regmap_update_bits(onkey->atc260x->regmap,
+ onkey->params->reg_int_ctl,
+ onkey->params->press_int_en_bm |
+ onkey->params->kdwn_int_en_bm, 0);
+ if (ret)
+ dev_err(onkey->atc260x->dev,
+ "Failed to disable interrupts: %d\n", ret);
+
+ input_report_key(onkey->input_dev, KEY_POWER, 1);
+ input_sync(onkey->input_dev);
+
+ atc260x_onkey_query(onkey);
+
+ return IRQ_HANDLED;
+}
+
+static int atc260x_onkey_open(struct input_dev *dev)
+{
+ struct atc260x_onkey *onkey = input_get_drvdata(dev);
+
+ enable_irq(onkey->irq);
+
+ return 0;
+}
+
+static void atc260x_onkey_close(struct input_dev *dev)
+{
+ struct atc260x_onkey *onkey = input_get_drvdata(dev);
+
+ disable_irq(onkey->irq);
+ cancel_delayed_work_sync(&onkey->work);
+}
+
+static int atc260x_onkey_probe(struct platform_device *pdev)
+{
+ struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
+ struct atc260x_onkey *onkey;
+ struct input_dev *input_dev;
+ enum atc260x_onkey_reset_status reset_status;
+ u32 press_time = KEY_PRESS_TIME_SEC, reset_time = 0;
+ int val, error;
+
+ onkey = devm_kzalloc(&pdev->dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey)
+ return -ENOMEM;
+
+ error = device_property_read_u32(pdev->dev.parent,
+ "reset-time-sec", &val);
+ if (error) {
+ reset_status = KEY_RESET_HW_DEFAULT;
+ } else if (val) {
+ if (val < 6 || val > 12) {
+ dev_err(&pdev->dev, "reset-time-sec out of range\n");
+ return -EINVAL;
+ }
+
+ reset_status = KEY_RESET_USER_SEL;
+ reset_time = (val - 6) / 2;
+ } else {
+ reset_status = KEY_RESET_DISABLED;
+ dev_dbg(&pdev->dev, "Disabled reset on long-press\n");
+ }
+
+ switch (atc260x->ic_type) {
+ case ATC2603C:
+ onkey->params = &atc2603c_onkey_params;
+ press_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+ press_time);
+ reset_time = FIELD_PREP(ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+ reset_time);
+ break;
+ case ATC2609A:
+ onkey->params = &atc2609a_onkey_params;
+ press_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME,
+ press_time);
+ reset_time = FIELD_PREP(ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL,
+ reset_time);
+ break;
+ default:
+ dev_err(&pdev->dev,
+ "OnKey not supported for ATC260x PMIC type: %u\n",
+ atc260x->ic_type);
+ return -EINVAL;
+ }
+
+ input_dev = devm_input_allocate_device(&pdev->dev);
+ if (!input_dev) {
+ dev_err(&pdev->dev, "Failed to allocate input device\n");
+ return -ENOMEM;
+ }
+
+ onkey->input_dev = input_dev;
+ onkey->atc260x = atc260x;
+
+ input_dev->name = "atc260x-onkey";
+ input_dev->phys = "atc260x-onkey/input0";
+ input_dev->open = atc260x_onkey_open;
+ input_dev->close = atc260x_onkey_close;
+
+ input_set_capability(input_dev, EV_KEY, KEY_POWER);
+ input_set_drvdata(input_dev, onkey);
+
+ INIT_DELAYED_WORK(&onkey->work, atc260x_onkey_work);
+
+ onkey->irq = platform_get_irq(pdev, 0);
+ if (onkey->irq < 0)
+ return onkey->irq;
+
+ error = devm_request_threaded_irq(&pdev->dev, onkey->irq, NULL,
+ atc260x_onkey_irq, IRQF_ONESHOT,
+ dev_name(&pdev->dev), onkey);
+ if (error) {
+ dev_err(&pdev->dev,
+ "Failed to register IRQ %d: %d\n", onkey->irq, error);
+ return error;
+ }
+
+ /* Keep IRQ disabled until atc260x_onkey_open() is called. */
+ disable_irq(onkey->irq);
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&pdev->dev,
+ "Failed to register input device: %d\n", error);
+ return error;
+ }
+
+ error = atc2603x_onkey_hw_init(onkey, reset_status,
+ reset_time, press_time);
+ if (error)
+ return error;
+
+ device_init_wakeup(&pdev->dev, true);
+
+ return 0;
+}
+
+static struct platform_driver atc260x_onkey_driver = {
+ .probe = atc260x_onkey_probe,
+ .driver = {
+ .name = "atc260x-onkey",
+ },
+};
+
+module_platform_driver(atc260x_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for ATC260x PMICs");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2ce9edb90901..5c7f2b100191 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -967,6 +967,17 @@ config MFD_VIPERBOARD
You need to select the mfd cell drivers separately.
The drivers do not support all features the board exposes.
+config MFD_NTXEC
+ tristate "Netronix embedded controller (EC)"
+ depends on OF || COMPILE_TEST
+ depends on I2C
+ select REGMAP_I2C
+ select MFD_CORE
+ help
+ Say yes here if you want to support the embedded controller found in
+ certain e-book readers designed by the original design manufacturer
+ Netronix.
+
config MFD_RETU
tristate "Nokia Retu and Tahvo multi-function device"
select MFD_CORE
@@ -1224,7 +1235,8 @@ config MFD_SC27XX_PMIC
config ABX500_CORE
bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
- default y if ARCH_U300 || ARCH_U8500 || COMPILE_TEST
+ depends on ARCH_U8500 || COMPILE_TEST
+ default y if ARCH_U8500
help
Say yes here if you have the ABX500 Mixed Signal IC family
chips. This core driver expose register access functions.
@@ -1232,30 +1244,6 @@ config ABX500_CORE
remain unchanged when IC changes. Binding of the functions to
actual register access is done by the IC core driver.
-config AB3100_CORE
- bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
- depends on I2C=y && ABX500_CORE
- select MFD_CORE
- default y if ARCH_U300
- help
- Select this to enable the AB3100 Mixed Signal IC core
- functionality. This connects to a AB3100 on the I2C bus
- and expose a number of symbols needed for dependent devices
- to read and write registers and subscribe to events from
- this multi-functional IC. This is needed to use other features
- of the AB3100 such as battery-backed RTC, charging control,
- LEDs, vibrator, system power and temperature, power management
- and ALSA sound.
-
-config AB3100_OTP
- tristate "ST-Ericsson AB3100 OTP functions"
- depends on AB3100_CORE
- default y if AB3100_CORE
- help
- Select this to enable the AB3100 Mixed Signal IC OTP (one-time
- programmable memory) support. This exposes a sysfs file to read
- out OTP values.
-
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on ABX500_CORE && MFD_DB8500_PRCMU
@@ -1975,19 +1963,31 @@ config MFD_ROHM_BD70528
charger.
config MFD_ROHM_BD71828
- tristate "ROHM BD71828 Power Management IC"
+ tristate "ROHM BD71828 and BD71815 Power Management IC"
depends on I2C=y
depends on OF
select REGMAP_I2C
select REGMAP_IRQ
select MFD_CORE
help
- Select this option to get support for the ROHM BD71828 Power
- Management IC. BD71828GW is a single-chip power management IC for
- battery-powered portable devices. The IC integrates 7 buck
- converters, 7 LDOs, and a 1500 mA single-cell linear charger.
- Also included is a Coulomb counter, a real-time clock (RTC), and
- a 32.768 kHz clock gate.
+ Select this option to get support for the ROHM BD71828 and BD71815
+ Power Management ICs. BD71828GW and BD71815AGW are single-chip power
+ management ICs mainly for battery-powered portable devices.
+ The BD71828 integrates 7 buck converters and 7 LDOs. The BD71815
+ has 5 bucks, 7 LDOs, and a boost for driving LEDs. Both ICs provide
+ also a single-cell linear charger, a Coulomb counter, a real-time
+ clock (RTC), GPIOs and a 32.768 kHz clock gate.
+
+config MFD_ROHM_BD957XMUF
+ tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs"
+ depends on I2C=y
+ depends on OF
+ select REGMAP_I2C
+ select MFD_CORE
+ help
+ Select this option to get support for the ROHM BD9576MUF and
+ BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
+ designed to be used to power R-Car series processors.
config MFD_STM32_LPTIMER
tristate "Support for STM32 Low-Power Timer"
@@ -2055,6 +2055,24 @@ config MFD_WCD934X
This driver provides common support WCD934x audio codec and its
associated Pin Controller, Soundwire Controller and Audio codec.
+config MFD_ATC260X
+ tristate
+ select MFD_CORE
+ select REGMAP
+ select REGMAP_IRQ
+
+config MFD_ATC260X_I2C
+ tristate "Actions Semi ATC260x PMICs with I2C"
+ select MFD_ATC260X
+ select REGMAP_I2C
+ depends on I2C
+ help
+ Support for the Actions Semi ATC260x PMICs controlled via I2C.
+
+ This driver provides common support for accessing the ATC2603C
+ and ATC2609A chip variants, additional drivers must be enabled
+ in order to use the functionality of the device.
+
config MFD_KHADAS_MCU
tristate "Support for Khadas System control Microcontroller"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 834f5463af28..4f6d2b8a5f76 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -178,8 +178,6 @@ obj-$(CONFIG_MFD_PCF50633) += pcf50633.o
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
obj-$(CONFIG_ABX500_CORE) += abx500-core.o
-obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
-obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
# ab8500-core need to come after db8500-prcmu (which provides the channel)
@@ -218,6 +216,7 @@ obj-$(CONFIG_MFD_INTEL_PMC_BXT) += intel_pmc_bxt.o
obj-$(CONFIG_MFD_INTEL_PMT) += intel_pmt.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
+obj-$(CONFIG_MFD_NTXEC) += ntxec.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_RK808) += rk808.o
obj-$(CONFIG_MFD_RN5T618) += rn5t618.o
@@ -261,6 +260,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
+obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
@@ -268,3 +268,6 @@ obj-$(CONFIG_MFD_ACER_A500_EC) += acer-ec-a500.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
+
+obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o
+obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
deleted file mode 100644
index ee71ae04b5e6..000000000000
--- a/drivers/mfd/ab3100-core.c
+++ /dev/null
@@ -1,929 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2007-2010 ST-Ericsson
- * Low-level core for exclusive access to the AB3100 IC on the I2C bus
- * and some basic chip-configuration.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <linux/notifier.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/random.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/ab3100.h>
-#include <linux/mfd/abx500.h>
-
-/* These are the only registers inside AB3100 used in this main file */
-
-/* Interrupt event registers */
-#define AB3100_EVENTA1 0x21
-#define AB3100_EVENTA2 0x22
-#define AB3100_EVENTA3 0x23
-
-/* AB3100 DAC converter registers */
-#define AB3100_DIS 0x00
-#define AB3100_D0C 0x01
-#define AB3100_D1C 0x02
-#define AB3100_D2C 0x03
-#define AB3100_D3C 0x04
-
-/* Chip ID register */
-#define AB3100_CID 0x20
-
-/* AB3100 interrupt registers */
-#define AB3100_IMRA1 0x24
-#define AB3100_IMRA2 0x25
-#define AB3100_IMRA3 0x26
-#define AB3100_IMRB1 0x2B
-#define AB3100_IMRB2 0x2C
-#define AB3100_IMRB3 0x2D
-
-/* System Power Monitoring and control registers */
-#define AB3100_MCA 0x2E
-#define AB3100_MCB 0x2F
-
-/* SIM power up */
-#define AB3100_SUP 0x50
-
-/*
- * I2C communication
- *
- * The AB3100 is usually assigned address 0x48 (7-bit)
- * The chip is defined in the platform i2c_board_data section.
- */
-static int ab3100_get_chip_id(struct device *dev)
-{
- struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-
- return (int)ab3100->chip_id;
-}
-
-static int ab3100_set_register_interruptible(struct ab3100 *ab3100,
- u8 reg, u8 regval)
-{
- u8 regandval[2] = {reg, regval};
- int err;
-
- err = mutex_lock_interruptible(&ab3100->access_mutex);
- if (err)
- return err;
-
- /*
- * A two-byte write message with the first byte containing the register
- * number and the second byte containing the value to be written
- * effectively sets a register in the AB3100.
- */
- err = i2c_master_send(ab3100->i2c_client, regandval, 2);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (write register): %d\n",
- err);
- } else if (err != 2) {
- dev_err(ab3100->dev,
- "write error (write register)\n"
- " %d bytes transferred (expected 2)\n",
- err);
- err = -EIO;
- } else {
- /* All is well */
- err = 0;
- }
- mutex_unlock(&ab3100->access_mutex);
- return err;
-}
-
-static int set_register_interruptible(struct device *dev,
- u8 bank, u8 reg, u8 value)
-{
- struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-
- return ab3100_set_register_interruptible(ab3100, reg, value);
-}
-
-/*
- * The test registers exist at an I2C bus address up one
- * from the ordinary base. They are not supposed to be used
- * in production code, but sometimes you have to do that
- * anyway. It's currently only used from this file so declare
- * it static and do not export.
- */
-static int ab3100_set_test_register_interruptible(struct ab3100 *ab3100,
- u8 reg, u8 regval)
-{
- u8 regandval[2] = {reg, regval};
- int err;
-
- err = mutex_lock_interruptible(&ab3100->access_mutex);
- if (err)
- return err;
-
- err = i2c_master_send(ab3100->testreg_client, regandval, 2);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (write test register): %d\n",
- err);
- } else if (err != 2) {
- dev_err(ab3100->dev,
- "write error (write test register)\n"
- " %d bytes transferred (expected 2)\n",
- err);
- err = -EIO;
- } else {
- /* All is well */
- err = 0;
- }
- mutex_unlock(&ab3100->access_mutex);
-
- return err;
-}
-
-static int ab3100_get_register_interruptible(struct ab3100 *ab3100,
- u8 reg, u8 *regval)
-{
- int err;
-
- err = mutex_lock_interruptible(&ab3100->access_mutex);
- if (err)
- return err;
-
- /*
- * AB3100 require an I2C "stop" command between each message, else
- * it will not work. The only way of achieveing this with the
- * message transport layer is to send the read and write messages
- * separately.
- */
- err = i2c_master_send(ab3100->i2c_client, &reg, 1);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (send register address): %d\n",
- err);
- goto get_reg_out_unlock;
- } else if (err != 1) {
- dev_err(ab3100->dev,
- "write error (send register address)\n"
- " %d bytes transferred (expected 1)\n",
- err);
- err = -EIO;
- goto get_reg_out_unlock;
- } else {
- /* All is well */
- err = 0;
- }
-
- err = i2c_master_recv(ab3100->i2c_client, regval, 1);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (read register): %d\n",
- err);
- goto get_reg_out_unlock;
- } else if (err != 1) {
- dev_err(ab3100->dev,
- "write error (read register)\n"
- " %d bytes transferred (expected 1)\n",
- err);
- err = -EIO;
- goto get_reg_out_unlock;
- } else {
- /* All is well */
- err = 0;
- }
-
- get_reg_out_unlock:
- mutex_unlock(&ab3100->access_mutex);
- return err;
-}
-
-static int get_register_interruptible(struct device *dev, u8 bank, u8 reg,
- u8 *value)
-{
- struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-
- return ab3100_get_register_interruptible(ab3100, reg, value);
-}
-
-static int ab3100_get_register_page_interruptible(struct ab3100 *ab3100,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- int err;
-
- if (ab3100->chip_id == 0xa0 ||
- ab3100->chip_id == 0xa1)
- /* These don't support paged reads */
- return -EIO;
-
- err = mutex_lock_interruptible(&ab3100->access_mutex);
- if (err)
- return err;
-
- /*
- * Paged read also require an I2C "stop" command.
- */
- err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (send first register address): %d\n",
- err);
- goto get_reg_page_out_unlock;
- } else if (err != 1) {
- dev_err(ab3100->dev,
- "write error (send first register address)\n"
- " %d bytes transferred (expected 1)\n",
- err);
- err = -EIO;
- goto get_reg_page_out_unlock;
- }
-
- err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (read register page): %d\n",
- err);
- goto get_reg_page_out_unlock;
- } else if (err != numregs) {
- dev_err(ab3100->dev,
- "write error (read register page)\n"
- " %d bytes transferred (expected %d)\n",
- err, numregs);
- err = -EIO;
- goto get_reg_page_out_unlock;
- }
-
- /* All is well */
- err = 0;
-
- get_reg_page_out_unlock:
- mutex_unlock(&ab3100->access_mutex);
- return err;
-}
-
-static int get_register_page_interruptible(struct device *dev, u8 bank,
- u8 first_reg, u8 *regvals, u8 numregs)
-{
- struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-
- return ab3100_get_register_page_interruptible(ab3100,
- first_reg, regvals, numregs);
-}
-
-static int ab3100_mask_and_set_register_interruptible(struct ab3100 *ab3100,
- u8 reg, u8 andmask, u8 ormask)
-{
- u8 regandval[2] = {reg, 0};
- int err;
-
- err = mutex_lock_interruptible(&ab3100->access_mutex);
- if (err)
- return err;
-
- /* First read out the target register */
- err = i2c_master_send(ab3100->i2c_client, &reg, 1);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (maskset send address): %d\n",
- err);
- goto get_maskset_unlock;
- } else if (err != 1) {
- dev_err(ab3100->dev,
- "write error (maskset send address)\n"
- " %d bytes transferred (expected 1)\n",
- err);
- err = -EIO;
- goto get_maskset_unlock;
- }
-
- err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (maskset read register): %d\n",
- err);
- goto get_maskset_unlock;
- } else if (err != 1) {
- dev_err(ab3100->dev,
- "write error (maskset read register)\n"
- " %d bytes transferred (expected 1)\n",
- err);
- err = -EIO;
- goto get_maskset_unlock;
- }
-
- /* Modify the register */
- regandval[1] &= andmask;
- regandval[1] |= ormask;
-
- /* Write the register */
- err = i2c_master_send(ab3100->i2c_client, regandval, 2);
- if (err < 0) {
- dev_err(ab3100->dev,
- "write error (write register): %d\n",
- err);
- goto get_maskset_unlock;
- } else if (err != 2) {
- dev_err(ab3100->dev,
- "write error (write register)\n"
- " %d bytes transferred (expected 2)\n",
- err);
- err = -EIO;
- goto get_maskset_unlock;
- }
-
- /* All is well */
- err = 0;
-
- get_maskset_unlock:
- mutex_unlock(&ab3100->access_mutex);
- return err;
-}
-
-static int mask_and_set_register_interruptible(struct device *dev, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues)
-{
- struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-
- return ab3100_mask_and_set_register_interruptible(ab3100,
- reg, bitmask, (bitmask & bitvalues));
-}
-
-/*
- * Register a simple callback for handling any AB3100 events.
- */
-int ab3100_event_register(struct ab3100 *ab3100,
- struct notifier_block *nb)
-{
- return blocking_notifier_chain_register(&ab3100->event_subscribers,
- nb);
-}
-EXPORT_SYMBOL(ab3100_event_register);
-
-/*
- * Remove a previously registered callback.
- */
-int ab3100_event_unregister(struct ab3100 *ab3100,
- struct notifier_block *nb)
-{
- return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
- nb);
-}
-EXPORT_SYMBOL(ab3100_event_unregister);
-
-
-static int ab3100_event_registers_startup_state_get(struct device *dev,
- u8 *event)
-{
- struct ab3100 *ab3100 = dev_get_drvdata(dev->parent);
-
- if (!ab3100->startup_events_read)
- return -EAGAIN; /* Try again later */
- memcpy(event, ab3100->startup_events, 3);
-
- return 0;
-}
-
-static struct abx500_ops ab3100_ops = {
- .get_chip_id = ab3100_get_chip_id,
- .set_register = set_register_interruptible,
- .get_register = get_register_interruptible,
- .get_register_page = get_register_page_interruptible,
- .set_register_page = NULL,
- .mask_and_set_register = mask_and_set_register_interruptible,
- .event_registers_startup_state_get =
- ab3100_event_registers_startup_state_get,
- .startup_irq_enabled = NULL,
-};
-
-/*
- * This is a threaded interrupt handler so we can make some
- * I2C calls etc.
- */
-static irqreturn_t ab3100_irq_handler(int irq, void *data)
-{
- struct ab3100 *ab3100 = data;
- u8 event_regs[3];
- u32 fatevent;
- int err;
-
- err = ab3100_get_register_page_interruptible(ab3100, AB3100_EVENTA1,
- event_regs, 3);
- if (err)
- goto err_event;
-
- fatevent = (event_regs[0] << 16) |
- (event_regs[1] << 8) |
- event_regs[2];
-
- if (!ab3100->startup_events_read) {
- ab3100->startup_events[0] = event_regs[0];
- ab3100->startup_events[1] = event_regs[1];
- ab3100->startup_events[2] = event_regs[2];
- ab3100->startup_events_read = true;
- }
- /*
- * The notified parties will have to mask out the events
- * they're interested in and react to them. They will be
- * notified on all events, then they use the fatevent value
- * to determine if they're interested.
- */
- blocking_notifier_call_chain(&ab3100->event_subscribers,
- fatevent, NULL);
-
- dev_dbg(ab3100->dev,
- "IRQ Event: 0x%08x\n", fatevent);
-
- return IRQ_HANDLED;
-
- err_event:
- dev_dbg(ab3100->dev,
- "error reading event status\n");
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_DEBUG_FS
-/*
- * Some debugfs entries only exposed if we're using debug
- */
-static int ab3100_registers_print(struct seq_file *s, void *p)
-{
- struct ab3100 *ab3100 = s->private;
- u8 value;
- u8 reg;
-
- seq_puts(s, "AB3100 registers:\n");
-
- for (reg = 0; reg < 0xff; reg++) {
- ab3100_get_register_interruptible(ab3100, reg, &value);
- seq_printf(s, "[0x%x]: 0x%x\n", reg, value);
- }
- return 0;
-}
-
-static int ab3100_registers_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3100_registers_print, inode->i_private);
-}
-
-static const struct file_operations ab3100_registers_fops = {
- .open = ab3100_registers_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .owner = THIS_MODULE,
-};
-
-struct ab3100_get_set_reg_priv {
- struct ab3100 *ab3100;
- bool mode;
-};
-
-static ssize_t ab3100_get_set_reg(struct file *file,
- const char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ab3100_get_set_reg_priv *priv = file->private_data;
- struct ab3100 *ab3100 = priv->ab3100;
- char buf[32];
- ssize_t buf_size;
- int regp;
- u8 user_reg;
- int err;
- int i = 0;
-
- /* Get userspace string and assure termination */
- buf_size = min((ssize_t)count, (ssize_t)(sizeof(buf)-1));
- if (copy_from_user(buf, user_buf, buf_size))
- return -EFAULT;
- buf[buf_size] = 0;
-
- /*
- * The idea is here to parse a string which is either
- * "0xnn" for reading a register, or "0xaa 0xbb" for
- * writing 0xbb to the register 0xaa. First move past
- * whitespace and then begin to parse the register.
- */
- while ((i < buf_size) && (buf[i] == ' '))
- i++;
- regp = i;
-
- /*
- * Advance pointer to end of string then terminate
- * the register string. This is needed to satisfy
- * the kstrtou8() function.
- */
- while ((i < buf_size) && (buf[i] != ' '))
- i++;
- buf[i] = '\0';
-
- err = kstrtou8(&buf[regp], 16, &user_reg);
- if (err)
- return err;
-
- /* Either we read or we write a register here */
- if (!priv->mode) {
- /* Reading */
- u8 regvalue;
-
- ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
-
- dev_info(ab3100->dev,
- "debug read AB3100 reg[0x%02x]: 0x%02x\n",
- user_reg, regvalue);
- } else {
- int valp;
- u8 user_value;
- u8 regvalue;
-
- /*
- * Writing, we need some value to write to
- * the register so keep parsing the string
- * from userspace.
- */
- i++;
- while ((i < buf_size) && (buf[i] == ' '))
- i++;
- valp = i;
- while ((i < buf_size) && (buf[i] != ' '))
- i++;
- buf[i] = '\0';
-
- err = kstrtou8(&buf[valp], 16, &user_value);
- if (err)
- return err;
-
- ab3100_set_register_interruptible(ab3100, user_reg, user_value);
- ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
-
- dev_info(ab3100->dev,
- "debug write reg[0x%02x]\n"
- " with 0x%02x, after readback: 0x%02x\n",
- user_reg, user_value, regvalue);
- }
- return buf_size;
-}
-
-static const struct file_operations ab3100_get_set_reg_fops = {
- .open = simple_open,
- .write = ab3100_get_set_reg,
- .llseek = noop_llseek,
-};
-
-static struct ab3100_get_set_reg_priv ab3100_get_priv;
-static struct ab3100_get_set_reg_priv ab3100_set_priv;
-
-static void ab3100_setup_debugfs(struct ab3100 *ab3100)
-{
- struct dentry *ab3100_dir;
-
- ab3100_dir = debugfs_create_dir("ab3100", NULL);
-
- debugfs_create_file("registers", S_IRUGO, ab3100_dir, ab3100,
- &ab3100_registers_fops);
-
- ab3100_get_priv.ab3100 = ab3100;
- ab3100_get_priv.mode = false;
- debugfs_create_file("get_reg", S_IWUSR, ab3100_dir, &ab3100_get_priv,
- &ab3100_get_set_reg_fops);
-
- ab3100_set_priv.ab3100 = ab3100;
- ab3100_set_priv.mode = true;
- debugfs_create_file("set_reg", S_IWUSR, ab3100_dir, &ab3100_set_priv,
- &ab3100_get_set_reg_fops);
-}
-#else
-static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
-{
-}
-#endif
-
-/*
- * Basic set-up, datastructure creation/destruction and I2C interface.
- * This sets up a default config in the AB3100 chip so that it
- * will work as expected.
- */
-
-struct ab3100_init_setting {
- u8 abreg;
- u8 setting;
-};
-
-static const struct ab3100_init_setting ab3100_init_settings[] = {
- {
- .abreg = AB3100_MCA,
- .setting = 0x01
- }, {
- .abreg = AB3100_MCB,
- .setting = 0x30
- }, {
- .abreg = AB3100_IMRA1,
- .setting = 0x00
- }, {
- .abreg = AB3100_IMRA2,
- .setting = 0xFF
- }, {
- .abreg = AB3100_IMRA3,
- .setting = 0x01
- }, {
- .abreg = AB3100_IMRB1,
- .setting = 0xBF
- }, {
- .abreg = AB3100_IMRB2,
- .setting = 0xFF
- }, {
- .abreg = AB3100_IMRB3,
- .setting = 0xFF
- }, {
- .abreg = AB3100_SUP,
- .setting = 0x00
- }, {
- .abreg = AB3100_DIS,
- .setting = 0xF0
- }, {
- .abreg = AB3100_D0C,
- .setting = 0x00
- }, {
- .abreg = AB3100_D1C,
- .setting = 0x00
- }, {
- .abreg = AB3100_D2C,
- .setting = 0x00
- }, {
- .abreg = AB3100_D3C,
- .setting = 0x00
- },
-};
-
-static int ab3100_setup(struct ab3100 *ab3100)
-{
- int err = 0;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
- err = ab3100_set_register_interruptible(ab3100,
- ab3100_init_settings[i].abreg,
- ab3100_init_settings[i].setting);
- if (err)
- goto exit_no_setup;
- }
-
- /*
- * Special trick to make the AB3100 use the 32kHz clock (RTC)
- * bit 3 in test register 0x02 is a special, undocumented test
- * register bit that only exist in AB3100 P1E
- */
- if (ab3100->chip_id == 0xc4) {
- dev_warn(ab3100->dev,
- "AB3100 P1E variant detected forcing chip to 32KHz\n");
- err = ab3100_set_test_register_interruptible(ab3100,
- 0x02, 0x08);
- }
-
- exit_no_setup:
- return err;
-}
-
-/* The subdevices of the AB3100 */
-static struct mfd_cell ab3100_devs[] = {
- {
- .name = "ab3100-dac",
- .id = -1,
- },
- {
- .name = "ab3100-leds",
- .id = -1,
- },
- {
- .name = "ab3100-power",
- .id = -1,
- },
- {
- .name = "ab3100-regulators",
- .of_compatible = "stericsson,ab3100-regulators",
- .id = -1,
- },
- {
- .name = "ab3100-sim",
- .id = -1,
- },
- {
- .name = "ab3100-uart",
- .id = -1,
- },
- {
- .name = "ab3100-rtc",
- .id = -1,
- },
- {
- .name = "ab3100-charger",
- .id = -1,
- },
- {
- .name = "ab3100-boost",
- .id = -1,
- },
- {
- .name = "ab3100-adc",
- .id = -1,
- },
- {
- .name = "ab3100-fuelgauge",
- .id = -1,
- },
- {
- .name = "ab3100-vibrator",
- .id = -1,
- },
- {
- .name = "ab3100-otp",
- .id = -1,
- },
- {
- .name = "ab3100-codec",
- .id = -1,
- },
-};
-
-struct ab_family_id {
- u8 id;
- char *name;
-};
-
-static const struct ab_family_id ids[] = {
- /* AB3100 */
- {
- .id = 0xc0,
- .name = "P1A"
- }, {
- .id = 0xc1,
- .name = "P1B"
- }, {
- .id = 0xc2,
- .name = "P1C"
- }, {
- .id = 0xc3,
- .name = "P1D"
- }, {
- .id = 0xc4,
- .name = "P1E"
- }, {
- .id = 0xc5,
- .name = "P1F/R1A"
- }, {
- .id = 0xc6,
- .name = "P1G/R1A"
- }, {
- .id = 0xc7,
- .name = "P2A/R2A"
- }, {
- .id = 0xc8,
- .name = "P2B/R2B"
- },
- /* AB3000 variants, not supported */
- {
- .id = 0xa0
- }, {
- .id = 0xa1
- }, {
- .id = 0xa2
- }, {
- .id = 0xa3
- }, {
- .id = 0xa4
- }, {
- .id = 0xa5
- }, {
- .id = 0xa6
- }, {
- .id = 0xa7
- },
- /* Terminator */
- {
- .id = 0x00,
- },
-};
-
-static int ab3100_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct ab3100 *ab3100;
- struct ab3100_platform_data *ab3100_plf_data =
- dev_get_platdata(&client->dev);
- int err;
- int i;
-
- ab3100 = devm_kzalloc(&client->dev, sizeof(struct ab3100), GFP_KERNEL);
- if (!ab3100)
- return -ENOMEM;
-
- /* Initialize data structure */
- mutex_init(&ab3100->access_mutex);
- BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
-
- ab3100->i2c_client = client;
- ab3100->dev = &ab3100->i2c_client->dev;
-
- i2c_set_clientdata(client, ab3100);
-
- /* Read chip ID register */
- err = ab3100_get_register_interruptible(ab3100, AB3100_CID,
- &ab3100->chip_id);
- if (err) {
- dev_err(&client->dev,
- "failed to communicate with AB3100 chip\n");
- goto exit_no_detect;
- }
-
- for (i = 0; ids[i].id != 0x0; i++) {
- if (ids[i].id == ab3100->chip_id) {
- if (ids[i].name)
- break;
-
- dev_err(&client->dev, "AB3000 is not supported\n");
- goto exit_no_detect;
- }
- }
-
- snprintf(&ab3100->chip_name[0],
- sizeof(ab3100->chip_name) - 1, "AB3100 %s", ids[i].name);
-
- if (ids[i].id == 0x0) {
- dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
- ab3100->chip_id);
- dev_err(&client->dev,
- "accepting it anyway. Please update the driver.\n");
- goto exit_no_detect;
- }
-
- dev_info(&client->dev, "Detected chip: %s\n",
- &ab3100->chip_name[0]);
-
- /* Attach a second dummy i2c_client to the test register address */
- ab3100->testreg_client = i2c_new_dummy_device(client->adapter,
- client->addr + 1);
- if (IS_ERR(ab3100->testreg_client)) {
- err = PTR_ERR(ab3100->testreg_client);
- goto exit_no_testreg_client;
- }
-
- err = ab3100_setup(ab3100);
- if (err)
- goto exit_no_setup;
-
- err = devm_request_threaded_irq(&client->dev,
- client->irq, NULL, ab3100_irq_handler,
- IRQF_ONESHOT, "ab3100-core", ab3100);
- if (err)
- goto exit_no_irq;
-
- err = abx500_register_ops(&client->dev, &ab3100_ops);
- if (err)
- goto exit_no_ops;
-
- /* Set up and register the platform devices. */
- for (i = 0; i < ARRAY_SIZE(ab3100_devs); i++) {
- ab3100_devs[i].platform_data = ab3100_plf_data;
- ab3100_devs[i].pdata_size = sizeof(struct ab3100_platform_data);
- }
-
- err = mfd_add_devices(&client->dev, 0, ab3100_devs,
- ARRAY_SIZE(ab3100_devs), NULL, 0, NULL);
-
- ab3100_setup_debugfs(ab3100);
-
- return 0;
-
- exit_no_ops:
- exit_no_irq:
- exit_no_setup:
- i2c_unregister_device(ab3100->testreg_client);
- exit_no_testreg_client:
- exit_no_detect:
- return err;
-}
-
-static const struct i2c_device_id ab3100_id[] = {
- { "ab3100", 0 },
- { }
-};
-
-static struct i2c_driver ab3100_driver = {
- .driver = {
- .name = "ab3100",
- .suppress_bind_attrs = true,
- },
- .id_table = ab3100_id,
- .probe = ab3100_probe,
-};
-
-static int __init ab3100_i2c_init(void)
-{
- return i2c_add_driver(&ab3100_driver);
-}
-subsys_initcall(ab3100_i2c_init);
diff --git a/drivers/mfd/ab3100-otp.c b/drivers/mfd/ab3100-otp.c
deleted file mode 100644
index c393102e3a39..000000000000
--- a/drivers/mfd/ab3100-otp.c
+++ /dev/null
@@ -1,240 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * drivers/mfd/ab3100_otp.c
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * Driver to read out OTP from the AB3100 Mixed-signal circuit
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/abx500.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-/* The OTP registers */
-#define AB3100_OTP0 0xb0
-#define AB3100_OTP1 0xb1
-#define AB3100_OTP2 0xb2
-#define AB3100_OTP3 0xb3
-#define AB3100_OTP4 0xb4
-#define AB3100_OTP5 0xb5
-#define AB3100_OTP6 0xb6
-#define AB3100_OTP7 0xb7
-#define AB3100_OTPP 0xbf
-
-/**
- * struct ab3100_otp
- * @dev: containing device
- * @locked: whether the OTP is locked, after locking, no more bits
- * can be changed but before locking it is still possible
- * to change bits from 1->0.
- * @freq: clocking frequency for the OTP, this frequency is either
- * 32768Hz or 1MHz/30
- * @paf: product activation flag, indicates whether this is a real
- * product (paf true) or a lab board etc (paf false)
- * @imeich: if this is set it is possible to override the
- * IMEI number found in the tac, fac and svn fields with
- * (secured) software
- * @cid: customer ID
- * @tac: type allocation code of the IMEI
- * @fac: final assembly code of the IMEI
- * @svn: software version number of the IMEI
- * @debugfs: a debugfs file used when dumping to file
- */
-struct ab3100_otp {
- struct device *dev;
- bool locked;
- u32 freq;
- bool paf;
- bool imeich;
- u16 cid:14;
- u32 tac:20;
- u8 fac;
- u32 svn:20;
- struct dentry *debugfs;
-};
-
-static int __init ab3100_otp_read(struct ab3100_otp *otp)
-{
- u8 otpval[8];
- u8 otpp;
- int err;
-
- err = abx500_get_register_interruptible(otp->dev, 0,
- AB3100_OTPP, &otpp);
- if (err) {
- dev_err(otp->dev, "unable to read OTPP register\n");
- return err;
- }
-
- err = abx500_get_register_page_interruptible(otp->dev, 0,
- AB3100_OTP0, otpval, 8);
- if (err) {
- dev_err(otp->dev, "unable to read OTP register page\n");
- return err;
- }
-
- /* Cache OTP properties, they never change by nature */
- otp->locked = (otpp & 0x80);
- otp->freq = (otpp & 0x40) ? 32768 : 34100;
- otp->paf = (otpval[1] & 0x80);
- otp->imeich = (otpval[1] & 0x40);
- otp->cid = ((otpval[1] << 8) | otpval[0]) & 0x3fff;
- otp->tac = ((otpval[4] & 0x0f) << 16) | (otpval[3] << 8) | otpval[2];
- otp->fac = ((otpval[5] & 0x0f) << 4) | (otpval[4] >> 4);
- otp->svn = (otpval[7] << 12) | (otpval[6] << 4) | (otpval[5] >> 4);
- return 0;
-}
-
-/*
- * This is a simple debugfs human-readable file that dumps out
- * the contents of the OTP.
- */
-#ifdef CONFIG_DEBUG_FS
-static int ab3100_show_otp(struct seq_file *s, void *v)
-{
- struct ab3100_otp *otp = s->private;
-
- seq_printf(s, "OTP is %s\n", otp->locked ? "LOCKED" : "UNLOCKED");
- seq_printf(s, "OTP clock switch startup is %uHz\n", otp->freq);
- seq_printf(s, "PAF is %s\n", otp->paf ? "SET" : "NOT SET");
- seq_printf(s, "IMEI is %s\n", otp->imeich ?
- "CHANGEABLE" : "NOT CHANGEABLE");
- seq_printf(s, "CID: 0x%04x (decimal: %d)\n", otp->cid, otp->cid);
- seq_printf(s, "IMEI: %u-%u-%u\n", otp->tac, otp->fac, otp->svn);
- return 0;
-}
-
-static int ab3100_otp_open(struct inode *inode, struct file *file)
-{
- return single_open(file, ab3100_show_otp, inode->i_private);
-}
-
-static const struct file_operations ab3100_otp_operations = {
- .open = ab3100_otp_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static void __init ab3100_otp_init_debugfs(struct device *dev,
- struct ab3100_otp *otp)
-{
- otp->debugfs = debugfs_create_file("ab3100_otp", S_IFREG | S_IRUGO,
- NULL, otp, &ab3100_otp_operations);
-}
-
-static void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
-{
- debugfs_remove(otp->debugfs);
-}
-#else
-/* Compile this out if debugfs not selected */
-static inline void __init ab3100_otp_init_debugfs(struct device *dev,
- struct ab3100_otp *otp)
-{
-}
-
-static inline void __exit ab3100_otp_exit_debugfs(struct ab3100_otp *otp)
-{
-}
-#endif
-
-#define SHOW_AB3100_ATTR(name) \
-static ssize_t ab3100_otp_##name##_show(struct device *dev, \
- struct device_attribute *attr, \
- char *buf) \
-{\
- struct ab3100_otp *otp = dev_get_drvdata(dev); \
- return sprintf(buf, "%u\n", otp->name); \
-}
-
-SHOW_AB3100_ATTR(locked)
-SHOW_AB3100_ATTR(freq)
-SHOW_AB3100_ATTR(paf)
-SHOW_AB3100_ATTR(imeich)
-SHOW_AB3100_ATTR(cid)
-SHOW_AB3100_ATTR(fac)
-SHOW_AB3100_ATTR(tac)
-SHOW_AB3100_ATTR(svn)
-
-static struct device_attribute ab3100_otp_attrs[] = {
- __ATTR(locked, S_IRUGO, ab3100_otp_locked_show, NULL),
- __ATTR(freq, S_IRUGO, ab3100_otp_freq_show, NULL),
- __ATTR(paf, S_IRUGO, ab3100_otp_paf_show, NULL),
- __ATTR(imeich, S_IRUGO, ab3100_otp_imeich_show, NULL),
- __ATTR(cid, S_IRUGO, ab3100_otp_cid_show, NULL),
- __ATTR(fac, S_IRUGO, ab3100_otp_fac_show, NULL),
- __ATTR(tac, S_IRUGO, ab3100_otp_tac_show, NULL),
- __ATTR(svn, S_IRUGO, ab3100_otp_svn_show, NULL),
-};
-
-static int __init ab3100_otp_probe(struct platform_device *pdev)
-{
- struct ab3100_otp *otp;
- int err = 0;
- int i;
-
- otp = devm_kzalloc(&pdev->dev, sizeof(struct ab3100_otp), GFP_KERNEL);
- if (!otp)
- return -ENOMEM;
-
- otp->dev = &pdev->dev;
-
- /* Replace platform data coming in with a local struct */
- platform_set_drvdata(pdev, otp);
-
- err = ab3100_otp_read(otp);
- if (err)
- return err;
-
- dev_info(&pdev->dev, "AB3100 OTP readout registered\n");
-
- /* sysfs entries */
- for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++) {
- err = device_create_file(&pdev->dev,
- &ab3100_otp_attrs[i]);
- if (err)
- goto err;
- }
-
- /* debugfs entries */
- ab3100_otp_init_debugfs(&pdev->dev, otp);
-
- return 0;
-
-err:
- while (--i >= 0)
- device_remove_file(&pdev->dev, &ab3100_otp_attrs[i]);
- return err;
-}
-
-static int __exit ab3100_otp_remove(struct platform_device *pdev)
-{
- struct ab3100_otp *otp = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ab3100_otp_attrs); i++)
- device_remove_file(&pdev->dev,
- &ab3100_otp_attrs[i]);
- ab3100_otp_exit_debugfs(otp);
- return 0;
-}
-
-static struct platform_driver ab3100_otp_driver = {
- .driver = {
- .name = "ab3100-otp",
- },
- .remove = __exit_p(ab3100_otp_remove),
-};
-
-module_platform_driver_probe(ab3100_otp_driver, ab3100_otp_probe);
-
-MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-MODULE_DESCRIPTION("AB3100 OTP Readout Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 22c0e3d87629..c2ba498ad302 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -120,12 +120,6 @@
static DEFINE_SPINLOCK(on_stat_lock);
static u8 turn_on_stat_mask = 0xFF;
static u8 turn_on_stat_set;
-static bool no_bm; /* No battery management */
-/*
- * not really modular, but the easiest way to keep compat with existing
- * bootargs behaviour is to continue using module_param here.
- */
-module_param(no_bm, bool, S_IRUGO);
#define AB9540_MODEM_CTRL2_REG 0x23
#define AB9540_MODEM_CTRL2_SWDBBRSTN_BIT BIT(2)
@@ -1254,14 +1248,12 @@ static int ab8500_probe(struct platform_device *pdev)
if (ret)
return ret;
- if (!no_bm) {
- /* Add battery management devices */
- ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
- ARRAY_SIZE(ab8500_bm_devs), NULL,
- 0, ab8500->domain);
- if (ret)
- dev_err(ab8500->dev, "error adding bm devices\n");
- }
+ /* Add battery management devices */
+ ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs,
+ ARRAY_SIZE(ab8500_bm_devs), NULL,
+ 0, ab8500->domain);
+ if (ret)
+ dev_err(ab8500->dev, "error adding bm devices\n");
if (((is_ab8505(ab8500) || is_ab9540(ab8500)) &&
ab8500->chip_id >= AB8500_CUT2P0) || is_ab8540(ab8500))
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 75f1bc671d59..ce6fe6de34f8 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -881,11 +881,6 @@ static const char * const wm5102_supplies[] = {
static const struct mfd_cell wm5102_devs[] = {
{ .name = "arizona-micsupp" },
{ .name = "arizona-gpio" },
- {
- .name = "arizona-extcon",
- .parent_supplies = wm5102_supplies,
- .num_parent_supplies = 1, /* We only need MICVDD */
- },
{ .name = "arizona-haptics" },
{ .name = "arizona-pwm" },
{
@@ -898,11 +893,6 @@ static const struct mfd_cell wm5102_devs[] = {
static const struct mfd_cell wm5110_devs[] = {
{ .name = "arizona-micsupp" },
{ .name = "arizona-gpio" },
- {
- .name = "arizona-extcon",
- .parent_supplies = wm5102_supplies,
- .num_parent_supplies = 1, /* We only need MICVDD */
- },
{ .name = "arizona-haptics" },
{ .name = "arizona-pwm" },
{
@@ -939,11 +929,6 @@ static const char * const wm8997_supplies[] = {
static const struct mfd_cell wm8997_devs[] = {
{ .name = "arizona-micsupp" },
{ .name = "arizona-gpio" },
- {
- .name = "arizona-extcon",
- .parent_supplies = wm8997_supplies,
- .num_parent_supplies = 1, /* We only need MICVDD */
- },
{ .name = "arizona-haptics" },
{ .name = "arizona-pwm" },
{
@@ -956,11 +941,6 @@ static const struct mfd_cell wm8997_devs[] = {
static const struct mfd_cell wm8998_devs[] = {
{ .name = "arizona-micsupp" },
{ .name = "arizona-gpio" },
- {
- .name = "arizona-extcon",
- .parent_supplies = wm5102_supplies,
- .num_parent_supplies = 1, /* We only need MICVDD */
- },
{ .name = "arizona-haptics" },
{ .name = "arizona-pwm" },
{
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 077d9ab112b7..d919ae9691e2 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -100,7 +100,7 @@ static irqreturn_t arizona_irq_thread(int irq, void *data)
unsigned int val;
int ret;
- ret = pm_runtime_get_sync(arizona->dev);
+ ret = pm_runtime_resume_and_get(arizona->dev);
if (ret < 0) {
dev_err(arizona->dev, "Failed to resume device: %d\n", ret);
return IRQ_NONE;
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 24a2c75d691a..aa1d6f94ae53 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -25,8 +25,8 @@
#include "arizona.h"
#ifdef CONFIG_ACPI
-const struct acpi_gpio_params reset_gpios = { 1, 0, false };
-const struct acpi_gpio_params ldoena_gpios = { 2, 0, false };
+static const struct acpi_gpio_params reset_gpios = { 1, 0, false };
+static const struct acpi_gpio_params ldoena_gpios = { 2, 0, false };
static const struct acpi_gpio_mapping arizona_acpi_gpios[] = {
{ "reset-gpios", &reset_gpios, 1, },
diff --git a/drivers/mfd/atc260x-core.c b/drivers/mfd/atc260x-core.c
new file mode 100644
index 000000000000..7148ff5b05b1
--- /dev/null
+++ b/drivers/mfd/atc260x-core.c
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Core support for ATC260x PMICs
+ *
+ * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/mfd/atc260x/core.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define ATC260X_CHIP_REV_MAX 31
+
+struct atc260x_init_regs {
+ unsigned int cmu_devrst;
+ unsigned int cmu_devrst_ints;
+ unsigned int ints_msk;
+ unsigned int pad_en;
+ unsigned int pad_en_extirq;
+};
+
+static void regmap_lock_mutex(void *__mutex)
+{
+ struct mutex *mutex = __mutex;
+
+ /*
+ * Using regmap within an atomic context (e.g. accessing a PMIC when
+ * powering system down) is normally allowed only if the regmap type
+ * is MMIO and the regcache type is either REGCACHE_NONE or
+ * REGCACHE_FLAT. For slow buses like I2C and SPI, the regmap is
+ * internally protected by a mutex which is acquired non-atomically.
+ *
+ * Let's improve this by using a customized locking scheme inspired
+ * from I2C atomic transfer. See i2c_in_atomic_xfer_mode() for a
+ * starting point.
+ */
+ if (system_state > SYSTEM_RUNNING && irqs_disabled())
+ mutex_trylock(mutex);
+ else
+ mutex_lock(mutex);
+}
+
+static void regmap_unlock_mutex(void *__mutex)
+{
+ struct mutex *mutex = __mutex;
+
+ mutex_unlock(mutex);
+}
+
+static const struct regmap_config atc2603c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = ATC2603C_SADDR,
+ .cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_config atc2609a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = ATC2609A_SADDR,
+ .cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_irq atc2603c_regmap_irqs[] = {
+ REGMAP_IRQ_REG(ATC2603C_IRQ_AUDIO, 0, ATC2603C_INTS_MSK_AUDIO),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_OV, 0, ATC2603C_INTS_MSK_OV),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_OC, 0, ATC2603C_INTS_MSK_OC),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_OT, 0, ATC2603C_INTS_MSK_OT),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_UV, 0, ATC2603C_INTS_MSK_UV),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_ALARM, 0, ATC2603C_INTS_MSK_ALARM),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_ONOFF, 0, ATC2603C_INTS_MSK_ONOFF),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_SGPIO, 0, ATC2603C_INTS_MSK_SGPIO),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_IR, 0, ATC2603C_INTS_MSK_IR),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_REMCON, 0, ATC2603C_INTS_MSK_REMCON),
+ REGMAP_IRQ_REG(ATC2603C_IRQ_POWER_IN, 0, ATC2603C_INTS_MSK_POWERIN),
+};
+
+static const struct regmap_irq atc2609a_regmap_irqs[] = {
+ REGMAP_IRQ_REG(ATC2609A_IRQ_AUDIO, 0, ATC2609A_INTS_MSK_AUDIO),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_OV, 0, ATC2609A_INTS_MSK_OV),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_OC, 0, ATC2609A_INTS_MSK_OC),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_OT, 0, ATC2609A_INTS_MSK_OT),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_UV, 0, ATC2609A_INTS_MSK_UV),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_ALARM, 0, ATC2609A_INTS_MSK_ALARM),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_ONOFF, 0, ATC2609A_INTS_MSK_ONOFF),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_WKUP, 0, ATC2609A_INTS_MSK_WKUP),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_IR, 0, ATC2609A_INTS_MSK_IR),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_REMCON, 0, ATC2609A_INTS_MSK_REMCON),
+ REGMAP_IRQ_REG(ATC2609A_IRQ_POWER_IN, 0, ATC2609A_INTS_MSK_POWERIN),
+};
+
+static const struct regmap_irq_chip atc2603c_regmap_irq_chip = {
+ .name = "atc2603c",
+ .irqs = atc2603c_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(atc2603c_regmap_irqs),
+ .num_regs = 1,
+ .status_base = ATC2603C_INTS_PD,
+ .mask_base = ATC2603C_INTS_MSK,
+ .mask_invert = true,
+};
+
+static const struct regmap_irq_chip atc2609a_regmap_irq_chip = {
+ .name = "atc2609a",
+ .irqs = atc2609a_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(atc2609a_regmap_irqs),
+ .num_regs = 1,
+ .status_base = ATC2609A_INTS_PD,
+ .mask_base = ATC2609A_INTS_MSK,
+ .mask_invert = true,
+};
+
+static const struct resource atc2603c_onkey_resources[] = {
+ DEFINE_RES_IRQ(ATC2603C_IRQ_ONOFF),
+};
+
+static const struct resource atc2609a_onkey_resources[] = {
+ DEFINE_RES_IRQ(ATC2609A_IRQ_ONOFF),
+};
+
+static const struct mfd_cell atc2603c_mfd_cells[] = {
+ { .name = "atc260x-regulator" },
+ { .name = "atc260x-pwrc" },
+ {
+ .name = "atc260x-onkey",
+ .num_resources = ARRAY_SIZE(atc2603c_onkey_resources),
+ .resources = atc2603c_onkey_resources,
+ },
+};
+
+static const struct mfd_cell atc2609a_mfd_cells[] = {
+ { .name = "atc260x-regulator" },
+ { .name = "atc260x-pwrc" },
+ {
+ .name = "atc260x-onkey",
+ .num_resources = ARRAY_SIZE(atc2609a_onkey_resources),
+ .resources = atc2609a_onkey_resources,
+ },
+};
+
+static const struct atc260x_init_regs atc2603c_init_regs = {
+ .cmu_devrst = ATC2603C_CMU_DEVRST,
+ .cmu_devrst_ints = ATC2603C_CMU_DEVRST_INTS,
+ .ints_msk = ATC2603C_INTS_MSK,
+ .pad_en = ATC2603C_PAD_EN,
+ .pad_en_extirq = ATC2603C_PAD_EN_EXTIRQ,
+};
+
+static const struct atc260x_init_regs atc2609a_init_regs = {
+ .cmu_devrst = ATC2609A_CMU_DEVRST,
+ .cmu_devrst_ints = ATC2609A_CMU_DEVRST_INTS,
+ .ints_msk = ATC2609A_INTS_MSK,
+ .pad_en = ATC2609A_PAD_EN,
+ .pad_en_extirq = ATC2609A_PAD_EN_EXTIRQ,
+};
+
+static void atc260x_cmu_reset(struct atc260x *atc260x)
+{
+ const struct atc260x_init_regs *regs = atc260x->init_regs;
+
+ /* Assert reset */
+ regmap_update_bits(atc260x->regmap, regs->cmu_devrst,
+ regs->cmu_devrst_ints, ~regs->cmu_devrst_ints);
+
+ /* De-assert reset */
+ regmap_update_bits(atc260x->regmap, regs->cmu_devrst,
+ regs->cmu_devrst_ints, regs->cmu_devrst_ints);
+}
+
+static void atc260x_dev_init(struct atc260x *atc260x)
+{
+ const struct atc260x_init_regs *regs = atc260x->init_regs;
+
+ /* Initialize interrupt block */
+ atc260x_cmu_reset(atc260x);
+
+ /* Disable all interrupt sources */
+ regmap_write(atc260x->regmap, regs->ints_msk, 0);
+
+ /* Enable EXTIRQ pad */
+ regmap_update_bits(atc260x->regmap, regs->pad_en,
+ regs->pad_en_extirq, regs->pad_en_extirq);
+}
+
+/**
+ * atc260x_match_device(): Setup ATC260x variant related fields
+ *
+ * @atc260x: ATC260x device to setup (.dev field must be set)
+ * @regmap_cfg: regmap config associated with this ATC260x device
+ *
+ * This lets the ATC260x core configure the MFD cells and register maps
+ * for later use.
+ */
+int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg)
+{
+ struct device *dev = atc260x->dev;
+ const void *of_data;
+
+ of_data = of_device_get_match_data(dev);
+ if (!of_data)
+ return -ENODEV;
+
+ atc260x->ic_type = (unsigned long)of_data;
+
+ switch (atc260x->ic_type) {
+ case ATC2603C:
+ *regmap_cfg = atc2603c_regmap_config;
+ atc260x->regmap_irq_chip = &atc2603c_regmap_irq_chip;
+ atc260x->cells = atc2603c_mfd_cells;
+ atc260x->nr_cells = ARRAY_SIZE(atc2603c_mfd_cells);
+ atc260x->type_name = "atc2603c";
+ atc260x->rev_reg = ATC2603C_CHIP_VER;
+ atc260x->init_regs = &atc2603c_init_regs;
+ break;
+ case ATC2609A:
+ *regmap_cfg = atc2609a_regmap_config;
+ atc260x->regmap_irq_chip = &atc2609a_regmap_irq_chip;
+ atc260x->cells = atc2609a_mfd_cells;
+ atc260x->nr_cells = ARRAY_SIZE(atc2609a_mfd_cells);
+ atc260x->type_name = "atc2609a";
+ atc260x->rev_reg = ATC2609A_CHIP_VER;
+ atc260x->init_regs = &atc2609a_init_regs;
+ break;
+ default:
+ dev_err(dev, "Unsupported ATC260x device type: %u\n",
+ atc260x->ic_type);
+ return -EINVAL;
+ }
+
+ atc260x->regmap_mutex = devm_kzalloc(dev, sizeof(*atc260x->regmap_mutex),
+ GFP_KERNEL);
+ if (!atc260x->regmap_mutex)
+ return -ENOMEM;
+
+ mutex_init(atc260x->regmap_mutex);
+
+ regmap_cfg->lock = regmap_lock_mutex,
+ regmap_cfg->unlock = regmap_unlock_mutex,
+ regmap_cfg->lock_arg = atc260x->regmap_mutex;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(atc260x_match_device);
+
+/**
+ * atc260x_device_probe(): Probe a configured ATC260x device
+ *
+ * @atc260x: ATC260x device to probe (must be configured)
+ *
+ * This function lets the ATC260x core register the ATC260x MFD devices
+ * and IRQCHIP. The ATC260x device passed in must be fully configured
+ * with atc260x_match_device, its IRQ set, and regmap created.
+ */
+int atc260x_device_probe(struct atc260x *atc260x)
+{
+ struct device *dev = atc260x->dev;
+ unsigned int chip_rev;
+ int ret;
+
+ if (!atc260x->irq) {
+ dev_err(dev, "No interrupt support\n");
+ return -EINVAL;
+ }
+
+ /* Initialize the hardware */
+ atc260x_dev_init(atc260x);
+
+ ret = regmap_read(atc260x->regmap, atc260x->rev_reg, &chip_rev);
+ if (ret) {
+ dev_err(dev, "Failed to get chip revision\n");
+ return ret;
+ }
+
+ if (chip_rev > ATC260X_CHIP_REV_MAX) {
+ dev_err(dev, "Unknown chip revision: %u\n", chip_rev);
+ return -EINVAL;
+ }
+
+ atc260x->ic_ver = __ffs(chip_rev + 1U);
+
+ dev_info(dev, "Detected chip type %s rev.%c\n",
+ atc260x->type_name, 'A' + atc260x->ic_ver);
+
+ ret = devm_regmap_add_irq_chip(dev, atc260x->regmap, atc260x->irq, IRQF_ONESHOT,
+ -1, atc260x->regmap_irq_chip, &atc260x->irq_data);
+ if (ret) {
+ dev_err(dev, "Failed to add IRQ chip: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+ atc260x->cells, atc260x->nr_cells, NULL, 0,
+ regmap_irq_get_domain(atc260x->irq_data));
+ if (ret) {
+ dev_err(dev, "Failed to add child devices: %d\n", ret);
+ regmap_del_irq_chip(atc260x->irq, atc260x->irq_data);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(atc260x_device_probe);
+
+MODULE_DESCRIPTION("ATC260x PMICs Core support");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/atc260x-i2c.c b/drivers/mfd/atc260x-i2c.c
new file mode 100644
index 000000000000..5855efd09efc
--- /dev/null
+++ b/drivers/mfd/atc260x-i2c.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * I2C bus interface for ATC260x PMICs
+ *
+ * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+static int atc260x_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct atc260x *atc260x;
+ struct regmap_config regmap_cfg;
+ int ret;
+
+ atc260x = devm_kzalloc(&client->dev, sizeof(*atc260x), GFP_KERNEL);
+ if (!atc260x)
+ return -ENOMEM;
+
+ atc260x->dev = &client->dev;
+ atc260x->irq = client->irq;
+
+ ret = atc260x_match_device(atc260x, &regmap_cfg);
+ if (ret)
+ return ret;
+
+ i2c_set_clientdata(client, atc260x);
+
+ atc260x->regmap = devm_regmap_init_i2c(client, &regmap_cfg);
+ if (IS_ERR(atc260x->regmap)) {
+ ret = PTR_ERR(atc260x->regmap);
+ dev_err(&client->dev, "failed to init regmap: %d\n", ret);
+ return ret;
+ }
+
+ return atc260x_device_probe(atc260x);
+}
+
+static const struct of_device_id atc260x_i2c_of_match[] = {
+ { .compatible = "actions,atc2603c", .data = (void *)ATC2603C },
+ { .compatible = "actions,atc2609a", .data = (void *)ATC2609A },
+ { }
+};
+MODULE_DEVICE_TABLE(of, atc260x_i2c_of_match);
+
+static struct i2c_driver atc260x_i2c_driver = {
+ .driver = {
+ .name = "atc260x",
+ .of_match_table = of_match_ptr(atc260x_i2c_of_match),
+ },
+ .probe = atc260x_i2c_probe,
+};
+module_i2c_driver(atc260x_i2c_driver);
+
+MODULE_DESCRIPTION("ATC260x PMICs I2C bus interface");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c
index 3781d0bb7786..783a14af18e2 100644
--- a/drivers/mfd/da9063-i2c.c
+++ b/drivers/mfd/da9063-i2c.c
@@ -442,6 +442,16 @@ static int da9063_i2c_probe(struct i2c_client *i2c,
return ret;
}
+ /* If SMBus is not available and only I2C is possible, enter I2C mode */
+ if (i2c_check_functionality(i2c->adapter, I2C_FUNC_I2C)) {
+ ret = regmap_clear_bits(da9063->regmap, DA9063_REG_CONFIG_J,
+ DA9063_TWOWIRE_TO);
+ if (ret < 0) {
+ dev_err(da9063->dev, "Failed to set Two-Wire Bus Mode.\n");
+ return -EIO;
+ }
+ }
+
return da9063_device_init(da9063, i2c->irq);
}
diff --git a/drivers/mfd/ene-kb3930.c b/drivers/mfd/ene-kb3930.c
index 83243e668e3f..1b73318d1f1f 100644
--- a/drivers/mfd/ene-kb3930.c
+++ b/drivers/mfd/ene-kb3930.c
@@ -33,7 +33,7 @@ struct kb3930 {
struct gpio_descs *off_gpios;
};
-struct kb3930 *kb3930_power_off;
+static struct kb3930 *kb3930_power_off;
#define EC_GPIO_WAVE 0
#define EC_GPIO_OFF_MODE 1
diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c
index c8fe334b5fe8..1f396039d58f 100644
--- a/drivers/mfd/intel-lpss-acpi.c
+++ b/drivers/mfd/intel-lpss-acpi.c
@@ -22,55 +22,71 @@ static const struct intel_lpss_platform_info spt_info = {
.clk_rate = 120000000,
};
-static struct property_entry spt_i2c_properties[] = {
+static const struct property_entry spt_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 230),
{ },
};
+static const struct software_node spt_i2c_node = {
+ .properties = spt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info spt_i2c_info = {
.clk_rate = 120000000,
- .properties = spt_i2c_properties,
+ .swnode = &spt_i2c_node,
};
-static struct property_entry uart_properties[] = {
+static const struct property_entry uart_properties[] = {
PROPERTY_ENTRY_U32("reg-io-width", 4),
PROPERTY_ENTRY_U32("reg-shift", 2),
PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
{ },
};
+static const struct software_node uart_node = {
+ .properties = uart_properties,
+};
+
static const struct intel_lpss_platform_info spt_uart_info = {
.clk_rate = 120000000,
.clk_con_id = "baudclk",
- .properties = uart_properties,
+ .swnode = &uart_node,
};
static const struct intel_lpss_platform_info bxt_info = {
.clk_rate = 100000000,
};
-static struct property_entry bxt_i2c_properties[] = {
+static const struct property_entry bxt_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
{ },
};
+static const struct software_node bxt_i2c_node = {
+ .properties = bxt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info bxt_i2c_info = {
.clk_rate = 133000000,
- .properties = bxt_i2c_properties,
+ .swnode = &bxt_i2c_node,
};
-static struct property_entry apl_i2c_properties[] = {
+static const struct property_entry apl_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
{ },
};
+static const struct software_node apl_i2c_node = {
+ .properties = apl_i2c_properties,
+};
+
static const struct intel_lpss_platform_info apl_i2c_info = {
.clk_rate = 133000000,
- .properties = apl_i2c_properties,
+ .swnode = &apl_i2c_node,
};
static const struct acpi_device_id intel_lpss_acpi_ids[] = {
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index 1522c8afc540..79c53617489c 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -65,27 +65,35 @@ static const struct intel_lpss_platform_info spt_info = {
.clk_rate = 120000000,
};
-static struct property_entry spt_i2c_properties[] = {
+static const struct property_entry spt_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 230),
{ },
};
+static const struct software_node spt_i2c_node = {
+ .properties = spt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info spt_i2c_info = {
.clk_rate = 120000000,
- .properties = spt_i2c_properties,
+ .swnode = &spt_i2c_node,
};
-static struct property_entry uart_properties[] = {
+static const struct property_entry uart_properties[] = {
PROPERTY_ENTRY_U32("reg-io-width", 4),
PROPERTY_ENTRY_U32("reg-shift", 2),
PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
{ },
};
+static const struct software_node uart_node = {
+ .properties = uart_properties,
+};
+
static const struct intel_lpss_platform_info spt_uart_info = {
.clk_rate = 120000000,
.clk_con_id = "baudclk",
- .properties = uart_properties,
+ .swnode = &uart_node,
};
static const struct intel_lpss_platform_info bxt_info = {
@@ -95,53 +103,65 @@ static const struct intel_lpss_platform_info bxt_info = {
static const struct intel_lpss_platform_info bxt_uart_info = {
.clk_rate = 100000000,
.clk_con_id = "baudclk",
- .properties = uart_properties,
+ .swnode = &uart_node,
};
-static struct property_entry bxt_i2c_properties[] = {
+static const struct property_entry bxt_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 42),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
{ },
};
+static const struct software_node bxt_i2c_node = {
+ .properties = bxt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info bxt_i2c_info = {
.clk_rate = 133000000,
- .properties = bxt_i2c_properties,
+ .swnode = &bxt_i2c_node,
};
-static struct property_entry apl_i2c_properties[] = {
+static const struct property_entry apl_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 207),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 208),
{ },
};
+static const struct software_node apl_i2c_node = {
+ .properties = apl_i2c_properties,
+};
+
static const struct intel_lpss_platform_info apl_i2c_info = {
.clk_rate = 133000000,
- .properties = apl_i2c_properties,
+ .swnode = &apl_i2c_node,
};
-static struct property_entry glk_i2c_properties[] = {
+static const struct property_entry glk_i2c_properties[] = {
PROPERTY_ENTRY_U32("i2c-sda-hold-time-ns", 313),
PROPERTY_ENTRY_U32("i2c-sda-falling-time-ns", 171),
PROPERTY_ENTRY_U32("i2c-scl-falling-time-ns", 290),
{ },
};
+static const struct software_node glk_i2c_node = {
+ .properties = glk_i2c_properties,
+};
+
static const struct intel_lpss_platform_info glk_i2c_info = {
.clk_rate = 133000000,
- .properties = glk_i2c_properties,
+ .swnode = &glk_i2c_node,
};
static const struct intel_lpss_platform_info cnl_i2c_info = {
.clk_rate = 216000000,
- .properties = spt_i2c_properties,
+ .swnode = &spt_i2c_node,
};
static const struct intel_lpss_platform_info ehl_i2c_info = {
.clk_rate = 100000000,
- .properties = bxt_i2c_properties,
+ .swnode = &bxt_i2c_node,
};
static const struct pci_device_id intel_lpss_pci_ids[] = {
diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index b0f0781a6b9c..a9bf10bee796 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -399,7 +399,7 @@ int intel_lpss_probe(struct device *dev,
if (ret)
return ret;
- lpss->cell->properties = info->properties;
+ lpss->cell->swnode = info->swnode;
intel_lpss_init_dev(lpss);
diff --git a/drivers/mfd/intel-lpss.h b/drivers/mfd/intel-lpss.h
index 4ae58a86bb42..22dbc4aed793 100644
--- a/drivers/mfd/intel-lpss.h
+++ b/drivers/mfd/intel-lpss.h
@@ -15,14 +15,14 @@
struct device;
struct resource;
-struct property_entry;
+struct software_node;
struct intel_lpss_platform_info {
struct resource *mem;
int irq;
unsigned long clk_rate;
const char *clk_con_id;
- struct property_entry *properties;
+ const struct software_node *swnode;
};
int intel_lpss_probe(struct device *dev,
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
index cb538983246c..1a9bfb7f48cd 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc.c
@@ -28,10 +28,23 @@ static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
{ .name = "n3000bmc-secure" },
};
+static const struct regmap_range m10bmc_regmap_range[] = {
+ regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
+ regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
+ regmap_reg_range(M10BMC_FLASH_BASE, M10BMC_FLASH_END),
+};
+
+static const struct regmap_access_table m10bmc_access_table = {
+ .yes_ranges = m10bmc_regmap_range,
+ .n_yes_ranges = ARRAY_SIZE(m10bmc_regmap_range),
+};
+
static struct regmap_config intel_m10bmc_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
+ .wr_table = &m10bmc_access_table,
+ .rd_table = &m10bmc_access_table,
.max_register = M10BMC_MEM_END,
};
@@ -121,17 +134,14 @@ static int check_m10bmc_version(struct intel_m10bmc *ddata)
int ret;
/*
- * This check is to filter out the very old legacy BMC versions,
- * M10BMC_LEGACY_SYS_BASE is the offset to this old block of mmio
- * registers. In the old BMC chips, the BMC version info is stored
- * in this old version register (M10BMC_LEGACY_SYS_BASE +
- * M10BMC_BUILD_VER), so its read out value would have not been
- * LEGACY_INVALID (0xffffffff). But in new BMC chips that the
- * driver supports, the value of this register should be
- * LEGACY_INVALID.
+ * This check is to filter out the very old legacy BMC versions. In the
+ * old BMC chips, the BMC version info is stored in the old version
+ * register (M10BMC_LEGACY_BUILD_VER), so its read out value would have
+ * not been M10BMC_VER_LEGACY_INVALID (0xffffffff). But in new BMC
+ * chips that the driver supports, the value of this register should be
+ * M10BMC_VER_LEGACY_INVALID.
*/
- ret = m10bmc_raw_read(ddata,
- M10BMC_LEGACY_SYS_BASE + M10BMC_BUILD_VER, &v);
+ ret = m10bmc_raw_read(ddata, M10BMC_LEGACY_BUILD_VER, &v);
if (ret)
return -ENODEV;
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index b67cb0a3ab05..01935ae4e9e1 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -16,8 +16,9 @@
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/dmi.h>
+#include <linux/i2c.h>
#include <linux/platform_data/gpio-dwapb.h>
-#include <linux/platform_data/i2c-designware.h>
+#include <linux/property.h>
/* PCI BAR for register base address */
#define MFD_I2C_BAR 0
@@ -45,29 +46,48 @@
#define INTEL_QUARK_I2C_CLK_HZ 33000000
struct intel_quark_mfd {
- struct device *dev;
struct clk *i2c_clk;
struct clk_lookup *i2c_clk_lookup;
};
+static const struct property_entry intel_quark_i2c_controller_standard_properties[] = {
+ PROPERTY_ENTRY_U32("clock-frequency", I2C_MAX_STANDARD_MODE_FREQ),
+ { }
+};
+
+static const struct software_node intel_quark_i2c_controller_standard_node = {
+ .name = "intel-quark-i2c-controller",
+ .properties = intel_quark_i2c_controller_standard_properties,
+};
+
+static const struct property_entry intel_quark_i2c_controller_fast_properties[] = {
+ PROPERTY_ENTRY_U32("clock-frequency", I2C_MAX_FAST_MODE_FREQ),
+ { }
+};
+
+static const struct software_node intel_quark_i2c_controller_fast_node = {
+ .name = "intel-quark-i2c-controller",
+ .properties = intel_quark_i2c_controller_fast_properties,
+};
+
static const struct dmi_system_id dmi_platform_info[] = {
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "Galileo"),
},
- .driver_data = (void *)100000,
+ .driver_data = (void *)&intel_quark_i2c_controller_standard_node,
},
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "GalileoGen2"),
},
- .driver_data = (void *)400000,
+ .driver_data = (void *)&intel_quark_i2c_controller_fast_node,
},
{
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"),
},
- .driver_data = (void *)400000,
+ .driver_data = (void *)&intel_quark_i2c_controller_fast_node,
},
{}
};
@@ -98,15 +118,7 @@ static struct mfd_cell_acpi_match intel_quark_acpi_match_gpio = {
};
static struct mfd_cell intel_quark_mfd_cells[] = {
- {
- .id = MFD_GPIO_BAR,
- .name = "gpio-dwapb",
- .acpi_match = &intel_quark_acpi_match_gpio,
- .num_resources = ARRAY_SIZE(intel_quark_gpio_res),
- .resources = intel_quark_gpio_res,
- .ignore_resource_conflicts = true,
- },
- {
+ [MFD_I2C_BAR] = {
.id = MFD_I2C_BAR,
.name = "i2c_designware",
.acpi_match = &intel_quark_acpi_match_i2c,
@@ -114,6 +126,14 @@ static struct mfd_cell intel_quark_mfd_cells[] = {
.resources = intel_quark_i2c_res,
.ignore_resource_conflicts = true,
},
+ [MFD_GPIO_BAR] = {
+ .id = MFD_GPIO_BAR,
+ .name = "gpio-dwapb",
+ .acpi_match = &intel_quark_acpi_match_gpio,
+ .num_resources = ARRAY_SIZE(intel_quark_gpio_res),
+ .resources = intel_quark_gpio_res,
+ .ignore_resource_conflicts = true,
+ },
};
static const struct pci_device_id intel_quark_mfd_ids[] = {
@@ -157,48 +177,37 @@ static void intel_quark_unregister_i2c_clk(struct device *dev)
clk_unregister(quark_mfd->i2c_clk);
}
-static int intel_quark_i2c_setup(struct pci_dev *pdev, struct mfd_cell *cell)
+static int intel_quark_i2c_setup(struct pci_dev *pdev)
{
+ struct mfd_cell *cell = &intel_quark_mfd_cells[MFD_I2C_BAR];
+ struct resource *res = intel_quark_i2c_res;
const struct dmi_system_id *dmi_id;
- struct dw_i2c_platform_data *pdata;
- struct resource *res = (struct resource *)cell->resources;
- struct device *dev = &pdev->dev;
- res[INTEL_QUARK_IORES_MEM].start =
- pci_resource_start(pdev, MFD_I2C_BAR);
- res[INTEL_QUARK_IORES_MEM].end =
- pci_resource_end(pdev, MFD_I2C_BAR);
+ res[INTEL_QUARK_IORES_MEM].start = pci_resource_start(pdev, MFD_I2C_BAR);
+ res[INTEL_QUARK_IORES_MEM].end = pci_resource_end(pdev, MFD_I2C_BAR);
- res[INTEL_QUARK_IORES_IRQ].start = pdev->irq;
- res[INTEL_QUARK_IORES_IRQ].end = pdev->irq;
-
- pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+ res[INTEL_QUARK_IORES_IRQ].start = pci_irq_vector(pdev, 0);
+ res[INTEL_QUARK_IORES_IRQ].end = pci_irq_vector(pdev, 0);
/* Normal mode by default */
- pdata->i2c_scl_freq = 100000;
+ cell->swnode = &intel_quark_i2c_controller_standard_node;
dmi_id = dmi_first_match(dmi_platform_info);
if (dmi_id)
- pdata->i2c_scl_freq = (uintptr_t)dmi_id->driver_data;
-
- cell->platform_data = pdata;
- cell->pdata_size = sizeof(*pdata);
+ cell->swnode = (struct software_node *)dmi_id->driver_data;
return 0;
}
-static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
+static int intel_quark_gpio_setup(struct pci_dev *pdev)
{
+ struct mfd_cell *cell = &intel_quark_mfd_cells[MFD_GPIO_BAR];
+ struct resource *res = intel_quark_gpio_res;
struct dwapb_platform_data *pdata;
- struct resource *res = (struct resource *)cell->resources;
struct device *dev = &pdev->dev;
- res[INTEL_QUARK_IORES_MEM].start =
- pci_resource_start(pdev, MFD_GPIO_BAR);
- res[INTEL_QUARK_IORES_MEM].end =
- pci_resource_end(pdev, MFD_GPIO_BAR);
+ res[INTEL_QUARK_IORES_MEM].start = pci_resource_start(pdev, MFD_GPIO_BAR);
+ res[INTEL_QUARK_IORES_MEM].end = pci_resource_end(pdev, MFD_GPIO_BAR);
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
@@ -217,7 +226,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
pdata->properties->idx = 0;
pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO;
pdata->properties->gpio_base = INTEL_QUARK_MFD_GPIO_BASE;
- pdata->properties->irq[0] = pdev->irq;
+ pdata->properties->irq[0] = pci_irq_vector(pdev, 0);
pdata->properties->irq_shared = true;
cell->platform_data = pdata;
@@ -240,29 +249,37 @@ static int intel_quark_mfd_probe(struct pci_dev *pdev,
if (!quark_mfd)
return -ENOMEM;
- quark_mfd->dev = &pdev->dev;
dev_set_drvdata(&pdev->dev, quark_mfd);
ret = intel_quark_register_i2c_clk(&pdev->dev);
if (ret)
return ret;
- ret = intel_quark_i2c_setup(pdev, &intel_quark_mfd_cells[1]);
- if (ret)
+ pci_set_master(pdev);
+
+ /* This driver only requires 1 IRQ vector */
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
goto err_unregister_i2c_clk;
- ret = intel_quark_gpio_setup(pdev, &intel_quark_mfd_cells[0]);
+ ret = intel_quark_i2c_setup(pdev);
if (ret)
- goto err_unregister_i2c_clk;
+ goto err_free_irq_vectors;
+
+ ret = intel_quark_gpio_setup(pdev);
+ if (ret)
+ goto err_free_irq_vectors;
ret = mfd_add_devices(&pdev->dev, 0, intel_quark_mfd_cells,
ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0,
NULL);
if (ret)
- goto err_unregister_i2c_clk;
+ goto err_free_irq_vectors;
return 0;
+err_free_irq_vectors:
+ pci_free_irq_vectors(pdev);
err_unregister_i2c_clk:
intel_quark_unregister_i2c_clk(&pdev->dev);
return ret;
@@ -270,8 +287,9 @@ err_unregister_i2c_clk:
static void intel_quark_mfd_remove(struct pci_dev *pdev)
{
- intel_quark_unregister_i2c_clk(&pdev->dev);
mfd_remove_devices(&pdev->dev);
+ pci_free_irq_vectors(pdev);
+ intel_quark_unregister_i2c_clk(&pdev->dev);
}
static struct pci_driver intel_quark_mfd_driver = {
diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c
index 22fdffd564f7..5690768f3e63 100644
--- a/drivers/mfd/lm3533-core.c
+++ b/drivers/mfd/lm3533-core.c
@@ -358,7 +358,7 @@ static struct attribute *lm3533_attributes[] = {
static umode_t lm3533_attr_is_visible(struct kobject *kobj,
struct attribute *attr, int n)
{
- struct device *dev = container_of(kobj, struct device, kobj);
+ struct device *dev = kobj_to_dev(kobj);
struct lm3533 *lm3533 = dev_get_drvdata(dev);
struct device_attribute *dattr = to_dev_attr(attr);
struct lm3533_device_attribute *lattr = to_lm3533_dev_attr(dattr);
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index f27eb8dabc1c..428a526cbe86 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -26,9 +26,6 @@
#define GPIO_IO_SIZE 64
#define GPIO_IO_SIZE_CENTERTON 128
-/* Intel Quark X1000 GPIO IRQ Number */
-#define GPIO_IRQ_QUARK_X1000 9
-
#define WDTBASE 0x84
#define WDT_IO_SIZE 64
@@ -43,30 +40,25 @@ struct lpc_sch_info {
unsigned int io_size_smbus;
unsigned int io_size_gpio;
unsigned int io_size_wdt;
- int irq_gpio;
};
static struct lpc_sch_info sch_chipset_info[] = {
[LPC_SCH] = {
.io_size_smbus = SMBUS_IO_SIZE,
.io_size_gpio = GPIO_IO_SIZE,
- .irq_gpio = -1,
},
[LPC_ITC] = {
.io_size_smbus = SMBUS_IO_SIZE,
.io_size_gpio = GPIO_IO_SIZE,
.io_size_wdt = WDT_IO_SIZE,
- .irq_gpio = -1,
},
[LPC_CENTERTON] = {
.io_size_smbus = SMBUS_IO_SIZE,
.io_size_gpio = GPIO_IO_SIZE_CENTERTON,
.io_size_wdt = WDT_IO_SIZE,
- .irq_gpio = -1,
},
[LPC_QUARK_X1000] = {
.io_size_gpio = GPIO_IO_SIZE,
- .irq_gpio = GPIO_IRQ_QUARK_X1000,
.io_size_wdt = WDT_IO_SIZE,
},
};
@@ -113,13 +105,13 @@ static int lpc_sch_get_io(struct pci_dev *pdev, int where, const char *name,
}
static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
- const char *name, int size, int irq,
- int id, struct mfd_cell *cell)
+ const char *name, int size, int id,
+ struct mfd_cell *cell)
{
struct resource *res;
int ret;
- res = devm_kcalloc(&pdev->dev, 2, sizeof(*res), GFP_KERNEL);
+ res = devm_kzalloc(&pdev->dev, sizeof(*res), GFP_KERNEL);
if (!res)
return -ENOMEM;
@@ -135,18 +127,6 @@ static int lpc_sch_populate_cell(struct pci_dev *pdev, int where,
cell->ignore_resource_conflicts = true;
cell->id = id;
- /* Check if we need to add an IRQ resource */
- if (irq < 0)
- return 0;
-
- res++;
-
- res->start = irq;
- res->end = irq;
- res->flags = IORESOURCE_IRQ;
-
- cell->num_resources++;
-
return 0;
}
@@ -158,7 +138,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
int ret;
ret = lpc_sch_populate_cell(dev, SMBASE, "isch_smbus",
- info->io_size_smbus, -1,
+ info->io_size_smbus,
id->device, &lpc_sch_cells[cells]);
if (ret < 0)
return ret;
@@ -166,7 +146,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
cells++;
ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio",
- info->io_size_gpio, info->irq_gpio,
+ info->io_size_gpio,
id->device, &lpc_sch_cells[cells]);
if (ret < 0)
return ret;
@@ -174,7 +154,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
cells++;
ret = lpc_sch_populate_cell(dev, WDTBASE, "ie6xx_wdt",
- info->io_size_wdt, -1,
+ info->io_size_wdt,
id->device, &lpc_sch_cells[cells]);
if (ret < 0)
return ret;
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 55d3a6f97783..68d8f2b95287 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -29,9 +29,9 @@
static const struct mfd_cell max8997_devs[] = {
{ .name = "max8997-pmic", },
{ .name = "max8997-rtc", },
- { .name = "max8997-battery", .of_compatible = "maxim,max8997-battery", },
+ { .name = "max8997-battery", },
{ .name = "max8997-haptic", },
- { .name = "max8997-muic", .of_compatible = "maxim,max8997-muic", },
+ { .name = "max8997-muic", },
{ .name = "max8997-led", .id = 1 },
{ .name = "max8997-led", .id = 2 },
};
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index fc00aaccb5f7..6f02b8022c6d 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -65,7 +65,7 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell,
{
const struct mfd_cell_acpi_match *match = cell->acpi_match;
struct acpi_device *parent, *child;
- struct acpi_device *adev;
+ struct acpi_device *adev = NULL;
parent = ACPI_COMPANION(pdev->dev.parent);
if (!parent)
@@ -77,10 +77,9 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell,
* _ADR or it will use the parent handle if is no ID is given.
*
* Note that use of _ADR is a grey area in the ACPI specification,
- * though Intel Galileo Gen2 is using it to distinguish the children
- * devices.
+ * though at least Intel Galileo Gen 2 is using it to distinguish
+ * the children devices.
*/
- adev = parent;
if (match) {
if (match->pnpid) {
struct acpi_device_id ids[2] = {};
@@ -93,22 +92,11 @@ static void mfd_acpi_add_device(const struct mfd_cell *cell,
}
}
} else {
- unsigned long long adr;
- acpi_status status;
-
- list_for_each_entry(child, &parent->children, node) {
- status = acpi_evaluate_integer(child->handle,
- "_ADR", NULL,
- &adr);
- if (ACPI_SUCCESS(status) && match->adr == adr) {
- adev = child;
- break;
- }
- }
+ adev = acpi_find_child_device(parent, match->adr, false);
}
}
- ACPI_COMPANION_SET(&pdev->dev, adev);
+ ACPI_COMPANION_SET(&pdev->dev, adev ?: parent);
}
#else
static inline void mfd_acpi_add_device(const struct mfd_cell *cell,
@@ -238,8 +226,8 @@ static int mfd_add_device(struct device *parent, int id,
goto fail_of_entry;
}
- if (cell->properties) {
- ret = platform_device_add_properties(pdev, cell->properties);
+ if (cell->swnode) {
+ ret = device_add_software_node(&pdev->dev, cell->swnode);
if (ret)
goto fail_of_entry;
}
@@ -304,6 +292,7 @@ fail_of_entry:
list_del(&of_entry->list);
kfree(of_entry);
}
+ device_remove_software_node(&pdev->dev);
fail_alias:
regulator_bulk_unregister_supply_alias(&pdev->dev,
cell->parent_supplies,
@@ -372,6 +361,8 @@ static int mfd_remove_devices_fn(struct device *dev, void *data)
regulator_bulk_unregister_supply_alias(dev, cell->parent_supplies,
cell->num_parent_supplies);
+ device_remove_software_node(&pdev->dev);
+
platform_device_unregister(pdev);
return 0;
}
diff --git a/drivers/mfd/ntxec.c b/drivers/mfd/ntxec.c
new file mode 100644
index 000000000000..b711e73eedcb
--- /dev/null
+++ b/drivers/mfd/ntxec.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements register access, version detection, and system
+ * power-off/reset.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#define NTXEC_REG_VERSION 0x00
+#define NTXEC_REG_POWEROFF 0x50
+#define NTXEC_REG_POWERKEEP 0x70
+#define NTXEC_REG_RESET 0x90
+
+#define NTXEC_POWEROFF_VALUE 0x0100
+#define NTXEC_POWERKEEP_VALUE 0x0800
+#define NTXEC_RESET_VALUE 0xff00
+
+static struct i2c_client *poweroff_restart_client;
+
+static void ntxec_poweroff(void)
+{
+ int res;
+ u8 buf[3] = { NTXEC_REG_POWEROFF };
+ struct i2c_msg msgs[] = {
+ {
+ .addr = poweroff_restart_client->addr,
+ .flags = 0,
+ .len = sizeof(buf),
+ .buf = buf,
+ },
+ };
+
+ put_unaligned_be16(NTXEC_POWEROFF_VALUE, buf + 1);
+
+ res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (res < 0)
+ dev_warn(&poweroff_restart_client->dev,
+ "Failed to power off (err = %d)\n", res);
+
+ /*
+ * The time from the register write until the host CPU is powered off
+ * has been observed to be about 2.5 to 3 seconds. Sleep long enough to
+ * safely avoid returning from the poweroff handler.
+ */
+ msleep(5000);
+}
+
+static int ntxec_restart(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ int res;
+ u8 buf[3] = { NTXEC_REG_RESET };
+ /*
+ * NOTE: The lower half of the reset value is not sent, because sending
+ * it causes an I2C error. (The reset handler in the downstream driver
+ * does send the full two-byte value, but doesn't check the result).
+ */
+ struct i2c_msg msgs[] = {
+ {
+ .addr = poweroff_restart_client->addr,
+ .flags = 0,
+ .len = sizeof(buf) - 1,
+ .buf = buf,
+ },
+ };
+
+ put_unaligned_be16(NTXEC_RESET_VALUE, buf + 1);
+
+ res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (res < 0)
+ dev_warn(&poweroff_restart_client->dev,
+ "Failed to restart (err = %d)\n", res);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block ntxec_restart_handler = {
+ .notifier_call = ntxec_restart,
+ .priority = 128,
+};
+
+static int regmap_ignore_write(void *context,
+ unsigned int reg, unsigned int val)
+
+{
+ struct regmap *regmap = context;
+
+ regmap_write(regmap, reg, val);
+
+ return 0;
+}
+
+static int regmap_wrap_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct regmap *regmap = context;
+
+ return regmap_read(regmap, reg, val);
+}
+
+/*
+ * Some firmware versions do not ack written data, add a wrapper. It
+ * is used to stack another regmap on top.
+ */
+static const struct regmap_config regmap_config_noack = {
+ .name = "ntxec_noack",
+ .reg_bits = 8,
+ .val_bits = 16,
+ .cache_type = REGCACHE_NONE,
+ .reg_write = regmap_ignore_write,
+ .reg_read = regmap_wrap_read
+};
+
+static const struct regmap_config regmap_config = {
+ .name = "ntxec",
+ .reg_bits = 8,
+ .val_bits = 16,
+ .cache_type = REGCACHE_NONE,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static const struct mfd_cell ntxec_subdev[] = {
+ { .name = "ntxec-rtc" },
+ { .name = "ntxec-pwm" },
+};
+
+static const struct mfd_cell ntxec_subdev_pwm[] = {
+ { .name = "ntxec-pwm" },
+};
+
+static int ntxec_probe(struct i2c_client *client)
+{
+ struct ntxec *ec;
+ unsigned int version;
+ int res;
+ const struct mfd_cell *subdevs;
+ size_t n_subdevs;
+
+ ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL);
+ if (!ec)
+ return -ENOMEM;
+
+ ec->dev = &client->dev;
+
+ ec->regmap = devm_regmap_init_i2c(client, &regmap_config);
+ if (IS_ERR(ec->regmap)) {
+ dev_err(ec->dev, "Failed to set up regmap for device\n");
+ return PTR_ERR(ec->regmap);
+ }
+
+ /* Determine the firmware version */
+ res = regmap_read(ec->regmap, NTXEC_REG_VERSION, &version);
+ if (res < 0) {
+ dev_err(ec->dev, "Failed to read firmware version number\n");
+ return res;
+ }
+
+ /* Bail out if we encounter an unknown firmware version */
+ switch (version) {
+ case NTXEC_VERSION_KOBO_AURA:
+ subdevs = ntxec_subdev;
+ n_subdevs = ARRAY_SIZE(ntxec_subdev);
+ break;
+ case NTXEC_VERSION_TOLINO_SHINE2:
+ subdevs = ntxec_subdev_pwm;
+ n_subdevs = ARRAY_SIZE(ntxec_subdev_pwm);
+ /* Another regmap stacked on top of the other */
+ ec->regmap = devm_regmap_init(ec->dev, NULL,
+ ec->regmap,
+ &regmap_config_noack);
+ if (IS_ERR(ec->regmap))
+ return PTR_ERR(ec->regmap);
+ break;
+ default:
+ dev_err(ec->dev,
+ "Netronix embedded controller version %04x is not supported.\n",
+ version);
+ return -ENODEV;
+ }
+
+ dev_info(ec->dev,
+ "Netronix embedded controller version %04x detected.\n", version);
+
+ if (of_device_is_system_power_controller(ec->dev->of_node)) {
+ /*
+ * Set the 'powerkeep' bit. This is necessary on some boards
+ * in order to keep the system running.
+ */
+ res = regmap_write(ec->regmap, NTXEC_REG_POWERKEEP,
+ NTXEC_POWERKEEP_VALUE);
+ if (res < 0)
+ return res;
+
+ if (poweroff_restart_client)
+ /*
+ * Another instance of the driver already took
+ * poweroff/restart duties.
+ */
+ dev_err(ec->dev, "poweroff_restart_client already assigned\n");
+ else
+ poweroff_restart_client = client;
+
+ if (pm_power_off)
+ /* Another driver already registered a poweroff handler. */
+ dev_err(ec->dev, "pm_power_off already assigned\n");
+ else
+ pm_power_off = ntxec_poweroff;
+
+ res = register_restart_handler(&ntxec_restart_handler);
+ if (res)
+ dev_err(ec->dev,
+ "Failed to register restart handler: %d\n", res);
+ }
+
+ i2c_set_clientdata(client, ec);
+
+ res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE,
+ subdevs, n_subdevs, NULL, 0, NULL);
+ if (res)
+ dev_err(ec->dev, "Failed to add subdevices: %d\n", res);
+
+ return res;
+}
+
+static int ntxec_remove(struct i2c_client *client)
+{
+ if (client == poweroff_restart_client) {
+ poweroff_restart_client = NULL;
+ pm_power_off = NULL;
+ unregister_restart_handler(&ntxec_restart_handler);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_ntxec_match_table[] = {
+ { .compatible = "netronix,ntxec", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, of_ntxec_match_table);
+
+static struct i2c_driver ntxec_driver = {
+ .driver = {
+ .name = "ntxec",
+ .of_match_table = of_ntxec_match_table,
+ },
+ .probe_new = ntxec_probe,
+ .remove = ntxec_remove,
+};
+module_i2c_driver(ntxec_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("Core driver for Netronix EC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index dc452df1f1bf..6ed04e6dbc78 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -45,8 +45,11 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
case RN5T618_INTMON:
case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
+ case RN5T618_CHGCTL1:
+ case RN5T618_REGISET1 ... RN5T618_REGISET2:
case RN5T618_CHGSTATE:
case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
+ case RN5T618_GCHGDET:
case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
return true;
default:
diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c
index 210261d026f2..714d9fcbf07b 100644
--- a/drivers/mfd/rohm-bd71828.c
+++ b/drivers/mfd/rohm-bd71828.c
@@ -2,7 +2,7 @@
//
// Copyright (C) 2019 ROHM Semiconductors
//
-// ROHM BD71828 PMIC driver
+// ROHM BD71828/BD71815 PMIC driver
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
@@ -11,7 +11,9 @@
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd71815.h>
#include <linux/mfd/rohm-bd71828.h>
+#include <linux/mfd/rohm-generic.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regmap.h>
@@ -29,12 +31,84 @@ static struct gpio_keys_platform_data bd71828_powerkey_data = {
.name = "bd71828-pwrkey",
};
-static const struct resource rtc_irqs[] = {
+static const struct resource bd71815_rtc_irqs[] = {
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC0, "bd71815-rtc-alm-0"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC1, "bd71815-rtc-alm-1"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC2, "bd71815-rtc-alm-2"),
+};
+
+static const struct resource bd71828_rtc_irqs[] = {
DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC0, "bd71828-rtc-alm-0"),
DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC1, "bd71828-rtc-alm-1"),
DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC2, "bd71828-rtc-alm-2"),
};
+static struct resource bd71815_power_irqs[] = {
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_RMV, "bd71815-dcin-rmv"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CLPS_OUT, "bd71815-clps-out"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CLPS_IN, "bd71815-clps-in"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_OVP_RES, "bd71815-dcin-ovp-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_OVP_DET, "bd71815-dcin-ovp-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_MON_RES, "bd71815-dcin-mon-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_MON_DET, "bd71815-dcin-mon-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_UV_RES, "bd71815-vsys-uv-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_UV_DET, "bd71815-vsys-uv-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_LOW_RES, "bd71815-vsys-low-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_LOW_DET, "bd71815-vsys-low-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_MON_RES, "bd71815-vsys-mon-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_MON_RES, "bd71815-vsys-mon-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_WDG_TEMP, "bd71815-chg-wdg-temp"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_WDG_TIME, "bd71815-chg-wdg"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RECHARGE_RES, "bd71815-rechg-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RECHARGE_DET, "bd71815-rechg-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RANGED_TEMP_TRANSITION, "bd71815-ranged-temp-transit"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_STATE_TRANSITION, "bd71815-chg-state-change"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_TEMP_NORMAL, "bd71815-bat-temp-normal"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_TEMP_ERANGE, "bd71815-bat-temp-erange"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_REMOVED, "bd71815-bat-rmv"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_DETECTED, "bd71815-bat-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_THERM_REMOVED, "bd71815-therm-rmv"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_THERM_DETECTED, "bd71815-therm-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_DEAD, "bd71815-bat-dead"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_SHORTC_RES, "bd71815-bat-short-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_SHORTC_DET, "bd71815-bat-short-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_LOW_VOLT_RES, "bd71815-bat-low-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_LOW_VOLT_DET, "bd71815-bat-low-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_VOLT_RES, "bd71815-bat-over-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_VOLT_DET, "bd71815-bat-over-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_MON_RES, "bd71815-bat-mon-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_MON_DET, "bd71815-bat-mon-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON1, "bd71815-bat-cc-mon1"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON2, "bd71815-bat-cc-mon2"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON3, "bd71815-bat-cc-mon3"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_1_RES, "bd71815-bat-oc1-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_1_DET, "bd71815-bat-oc1-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_2_RES, "bd71815-bat-oc2-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_2_DET, "bd71815-bat-oc2-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_3_RES, "bd71815-bat-oc3-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_3_DET, "bd71815-bat-oc3-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_LOW_RES, "bd71815-bat-low-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_LOW_DET, "bd71815-bat-low-det"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_HI_RES, "bd71815-bat-hi-res"),
+ DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_HI_DET, "bd71815-bat-hi-det"),
+};
+
+static struct mfd_cell bd71815_mfd_cells[] = {
+ { .name = "bd71815-pmic", },
+ { .name = "bd71815-clk", },
+ { .name = "bd71815-gpo", },
+ {
+ .name = "bd71815-power",
+ .num_resources = ARRAY_SIZE(bd71815_power_irqs),
+ .resources = &bd71815_power_irqs[0],
+ },
+ {
+ .name = "bd71815-rtc",
+ .num_resources = ARRAY_SIZE(bd71815_rtc_irqs),
+ .resources = &bd71815_rtc_irqs[0],
+ },
+};
+
static struct mfd_cell bd71828_mfd_cells[] = {
{ .name = "bd71828-pmic", },
{ .name = "bd71828-gpio", },
@@ -47,8 +121,8 @@ static struct mfd_cell bd71828_mfd_cells[] = {
{ .name = "bd71827-power", },
{
.name = "bd71828-rtc",
- .resources = rtc_irqs,
- .num_resources = ARRAY_SIZE(rtc_irqs),
+ .resources = bd71828_rtc_irqs,
+ .num_resources = ARRAY_SIZE(bd71828_rtc_irqs),
}, {
.name = "gpio-keys",
.platform_data = &bd71828_powerkey_data,
@@ -56,7 +130,35 @@ static struct mfd_cell bd71828_mfd_cells[] = {
},
};
-static const struct regmap_range volatile_ranges[] = {
+static const struct regmap_range bd71815_volatile_ranges[] = {
+ {
+ .range_min = BD71815_REG_SEC,
+ .range_max = BD71815_REG_YEAR,
+ }, {
+ .range_min = BD71815_REG_CONF,
+ .range_max = BD71815_REG_BAT_TEMP,
+ }, {
+ .range_min = BD71815_REG_VM_IBAT_U,
+ .range_max = BD71815_REG_CC_CTRL,
+ }, {
+ .range_min = BD71815_REG_CC_STAT,
+ .range_max = BD71815_REG_CC_CURCD_L,
+ }, {
+ .range_min = BD71815_REG_VM_BTMP_MON,
+ .range_max = BD71815_REG_VM_BTMP_MON,
+ }, {
+ .range_min = BD71815_REG_INT_STAT,
+ .range_max = BD71815_REG_INT_UPDATE,
+ }, {
+ .range_min = BD71815_REG_VM_VSYS_U,
+ .range_max = BD71815_REG_REX_CTRL_1,
+ }, {
+ .range_min = BD71815_REG_FULL_CCNTD_3,
+ .range_max = BD71815_REG_CCNTD_CHG_2,
+ },
+};
+
+static const struct regmap_range bd71828_volatile_ranges[] = {
{
.range_min = BD71828_REG_PS_CTRL_1,
.range_max = BD71828_REG_PS_CTRL_1,
@@ -80,15 +182,28 @@ static const struct regmap_range volatile_ranges[] = {
},
};
-static const struct regmap_access_table volatile_regs = {
- .yes_ranges = &volatile_ranges[0],
- .n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+static const struct regmap_access_table bd71815_volatile_regs = {
+ .yes_ranges = &bd71815_volatile_ranges[0],
+ .n_yes_ranges = ARRAY_SIZE(bd71815_volatile_ranges),
+};
+
+static const struct regmap_access_table bd71828_volatile_regs = {
+ .yes_ranges = &bd71828_volatile_ranges[0],
+ .n_yes_ranges = ARRAY_SIZE(bd71828_volatile_ranges),
+};
+
+static const struct regmap_config bd71815_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_table = &bd71815_volatile_regs,
+ .max_register = BD71815_MAX_REGISTER - 1,
+ .cache_type = REGCACHE_RBTREE,
};
-static struct regmap_config bd71828_regmap = {
+static const struct regmap_config bd71828_regmap = {
.reg_bits = 8,
.val_bits = 8,
- .volatile_table = &volatile_regs,
+ .volatile_table = &bd71828_volatile_regs,
.max_register = BD71828_MAX_REGISTER,
.cache_type = REGCACHE_RBTREE,
};
@@ -96,7 +211,7 @@ static struct regmap_config bd71828_regmap = {
/*
* Mapping of main IRQ register bits to sub-IRQ register offsets so that we can
* access corect sub-IRQ registers based on bits that are set in main IRQ
- * register.
+ * register. BD71815 and BD71828 have same sub-register-block offests.
*/
static unsigned int bit0_offsets[] = {11}; /* RTC IRQ */
@@ -108,7 +223,7 @@ static unsigned int bit5_offsets[] = {3}; /* VSYS IRQ */
static unsigned int bit6_offsets[] = {1, 2}; /* DCIN IRQ */
static unsigned int bit7_offsets[] = {0}; /* BUCK IRQ */
-static struct regmap_irq_sub_irq_map bd71828_sub_irq_offsets[] = {
+static struct regmap_irq_sub_irq_map bd718xx_sub_irq_offsets[] = {
REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets),
@@ -119,6 +234,88 @@ static struct regmap_irq_sub_irq_map bd71828_sub_irq_offsets[] = {
REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets),
};
+static const struct regmap_irq bd71815_irqs[] = {
+ REGMAP_IRQ_REG(BD71815_INT_BUCK1_OCP, 0, BD71815_INT_BUCK1_OCP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BUCK2_OCP, 0, BD71815_INT_BUCK2_OCP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BUCK3_OCP, 0, BD71815_INT_BUCK3_OCP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BUCK4_OCP, 0, BD71815_INT_BUCK4_OCP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BUCK5_OCP, 0, BD71815_INT_BUCK5_OCP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_LED_OVP, 0, BD71815_INT_LED_OVP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_LED_OCP, 0, BD71815_INT_LED_OCP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_LED_SCP, 0, BD71815_INT_LED_SCP_MASK),
+ /* DCIN1 interrupts */
+ REGMAP_IRQ_REG(BD71815_INT_DCIN_RMV, 1, BD71815_INT_DCIN_RMV_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CLPS_OUT, 1, BD71815_INT_CLPS_OUT_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CLPS_IN, 1, BD71815_INT_CLPS_IN_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_DCIN_OVP_RES, 1, BD71815_INT_DCIN_OVP_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_DCIN_OVP_DET, 1, BD71815_INT_DCIN_OVP_DET_MASK),
+ /* DCIN2 interrupts */
+ REGMAP_IRQ_REG(BD71815_INT_DCIN_MON_RES, 2, BD71815_INT_DCIN_MON_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_DCIN_MON_DET, 2, BD71815_INT_DCIN_MON_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_WDOG, 2, BD71815_INT_WDOG_MASK),
+ /* Vsys */
+ REGMAP_IRQ_REG(BD71815_INT_VSYS_UV_RES, 3, BD71815_INT_VSYS_UV_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_VSYS_UV_DET, 3, BD71815_INT_VSYS_UV_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_VSYS_LOW_RES, 3, BD71815_INT_VSYS_LOW_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_VSYS_LOW_DET, 3, BD71815_INT_VSYS_LOW_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_VSYS_MON_RES, 3, BD71815_INT_VSYS_MON_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_VSYS_MON_DET, 3, BD71815_INT_VSYS_MON_DET_MASK),
+ /* Charger */
+ REGMAP_IRQ_REG(BD71815_INT_CHG_WDG_TEMP, 4, BD71815_INT_CHG_WDG_TEMP_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CHG_WDG_TIME, 4, BD71815_INT_CHG_WDG_TIME_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CHG_RECHARGE_RES, 4, BD71815_INT_CHG_RECHARGE_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CHG_RECHARGE_DET, 4, BD71815_INT_CHG_RECHARGE_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CHG_RANGED_TEMP_TRANSITION, 4,
+ BD71815_INT_CHG_RANGED_TEMP_TRANSITION_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_CHG_STATE_TRANSITION, 4, BD71815_INT_CHG_STATE_TRANSITION_MASK),
+ /* Battery */
+ REGMAP_IRQ_REG(BD71815_INT_BAT_TEMP_NORMAL, 5, BD71815_INT_BAT_TEMP_NORMAL_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_TEMP_ERANGE, 5, BD71815_INT_BAT_TEMP_ERANGE_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_REMOVED, 5, BD71815_INT_BAT_REMOVED_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_DETECTED, 5, BD71815_INT_BAT_DETECTED_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_THERM_REMOVED, 5, BD71815_INT_THERM_REMOVED_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_THERM_DETECTED, 5, BD71815_INT_THERM_DETECTED_MASK),
+ /* Battery Mon 1 */
+ REGMAP_IRQ_REG(BD71815_INT_BAT_DEAD, 6, BD71815_INT_BAT_DEAD_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_SHORTC_RES, 6, BD71815_INT_BAT_SHORTC_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_SHORTC_DET, 6, BD71815_INT_BAT_SHORTC_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_LOW_VOLT_RES, 6, BD71815_INT_BAT_LOW_VOLT_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_LOW_VOLT_DET, 6, BD71815_INT_BAT_LOW_VOLT_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_VOLT_RES, 6, BD71815_INT_BAT_OVER_VOLT_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_VOLT_DET, 6, BD71815_INT_BAT_OVER_VOLT_DET_MASK),
+ /* Battery Mon 2 */
+ REGMAP_IRQ_REG(BD71815_INT_BAT_MON_RES, 7, BD71815_INT_BAT_MON_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_MON_DET, 7, BD71815_INT_BAT_MON_DET_MASK),
+ /* Battery Mon 3 (Coulomb counter) */
+ REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON1, 8, BD71815_INT_BAT_CC_MON1_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON2, 8, BD71815_INT_BAT_CC_MON2_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON3, 8, BD71815_INT_BAT_CC_MON3_MASK),
+ /* Battery Mon 4 */
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_1_RES, 9, BD71815_INT_BAT_OVER_CURR_1_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_1_DET, 9, BD71815_INT_BAT_OVER_CURR_1_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_2_RES, 9, BD71815_INT_BAT_OVER_CURR_2_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_2_DET, 9, BD71815_INT_BAT_OVER_CURR_2_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_3_RES, 9, BD71815_INT_BAT_OVER_CURR_3_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_3_DET, 9, BD71815_INT_BAT_OVER_CURR_3_DET_MASK),
+ /* Temperature */
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_LOW_RES, 10, BD71815_INT_TEMP_BAT_LOW_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_LOW_DET, 10, BD71815_INT_TEMP_BAT_LOW_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_HI_RES, 10, BD71815_INT_TEMP_BAT_HI_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_HI_DET, 10, BD71815_INT_TEMP_BAT_HI_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_125_RES, 10,
+ BD71815_INT_TEMP_CHIP_OVER_125_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_125_DET, 10,
+ BD71815_INT_TEMP_CHIP_OVER_125_DET_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_VF_RES, 10,
+ BD71815_INT_TEMP_CHIP_OVER_VF_RES_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_VF_DET, 10,
+ BD71815_INT_TEMP_CHIP_OVER_VF_DET_MASK),
+ /* RTC Alarm */
+ REGMAP_IRQ_REG(BD71815_INT_RTC0, 11, BD71815_INT_RTC0_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_RTC1, 11, BD71815_INT_RTC1_MASK),
+ REGMAP_IRQ_REG(BD71815_INT_RTC2, 11, BD71815_INT_RTC2_MASK),
+};
+
static struct regmap_irq bd71828_irqs[] = {
REGMAP_IRQ_REG(BD71828_INT_BUCK1_OCP, 0, BD71828_INT_BUCK1_OCP_MASK),
REGMAP_IRQ_REG(BD71828_INT_BUCK2_OCP, 0, BD71828_INT_BUCK2_OCP_MASK),
@@ -134,10 +331,8 @@ static struct regmap_irq bd71828_irqs[] = {
REGMAP_IRQ_REG(BD71828_INT_CLPS_OUT, 1, BD71828_INT_CLPS_OUT_MASK),
REGMAP_IRQ_REG(BD71828_INT_CLPS_IN, 1, BD71828_INT_CLPS_IN_MASK),
/* DCIN2 interrupts */
- REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_RES, 2,
- BD71828_INT_DCIN_MON_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_DET, 2,
- BD71828_INT_DCIN_MON_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_RES, 2, BD71828_INT_DCIN_MON_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_DET, 2, BD71828_INT_DCIN_MON_DET_MASK),
REGMAP_IRQ_REG(BD71828_INT_LONGPUSH, 2, BD71828_INT_LONGPUSH_MASK),
REGMAP_IRQ_REG(BD71828_INT_MIDPUSH, 2, BD71828_INT_MIDPUSH_MASK),
REGMAP_IRQ_REG(BD71828_INT_SHORTPUSH, 2, BD71828_INT_SHORTPUSH_MASK),
@@ -145,102 +340,59 @@ static struct regmap_irq bd71828_irqs[] = {
REGMAP_IRQ_REG(BD71828_INT_WDOG, 2, BD71828_INT_WDOG_MASK),
REGMAP_IRQ_REG(BD71828_INT_SWRESET, 2, BD71828_INT_SWRESET_MASK),
/* Vsys */
- REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_RES, 3,
- BD71828_INT_VSYS_UV_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_DET, 3,
- BD71828_INT_VSYS_UV_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_RES, 3,
- BD71828_INT_VSYS_LOW_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_DET, 3,
- BD71828_INT_VSYS_LOW_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_IN, 3,
- BD71828_INT_VSYS_HALL_IN_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_TOGGLE, 3,
- BD71828_INT_VSYS_HALL_TOGGLE_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_RES, 3,
- BD71828_INT_VSYS_MON_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_DET, 3,
- BD71828_INT_VSYS_MON_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_RES, 3, BD71828_INT_VSYS_UV_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_DET, 3, BD71828_INT_VSYS_UV_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_RES, 3, BD71828_INT_VSYS_LOW_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_DET, 3, BD71828_INT_VSYS_LOW_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_IN, 3, BD71828_INT_VSYS_HALL_IN_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_TOGGLE, 3, BD71828_INT_VSYS_HALL_TOGGLE_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_RES, 3, BD71828_INT_VSYS_MON_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_DET, 3, BD71828_INT_VSYS_MON_DET_MASK),
/* Charger */
- REGMAP_IRQ_REG(BD71828_INT_CHG_DCIN_ILIM, 4,
- BD71828_INT_CHG_DCIN_ILIM_MASK),
- REGMAP_IRQ_REG(BD71828_INT_CHG_TOPOFF_TO_DONE, 4,
- BD71828_INT_CHG_TOPOFF_TO_DONE_MASK),
- REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TEMP, 4,
- BD71828_INT_CHG_WDG_TEMP_MASK),
- REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TIME, 4,
- BD71828_INT_CHG_WDG_TIME_MASK),
- REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_RES, 4,
- BD71828_INT_CHG_RECHARGE_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_DET, 4,
- BD71828_INT_CHG_RECHARGE_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_DCIN_ILIM, 4, BD71828_INT_CHG_DCIN_ILIM_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_TOPOFF_TO_DONE, 4, BD71828_INT_CHG_TOPOFF_TO_DONE_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TEMP, 4, BD71828_INT_CHG_WDG_TEMP_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TIME, 4, BD71828_INT_CHG_WDG_TIME_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_RES, 4, BD71828_INT_CHG_RECHARGE_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_DET, 4, BD71828_INT_CHG_RECHARGE_DET_MASK),
REGMAP_IRQ_REG(BD71828_INT_CHG_RANGED_TEMP_TRANSITION, 4,
BD71828_INT_CHG_RANGED_TEMP_TRANSITION_MASK),
- REGMAP_IRQ_REG(BD71828_INT_CHG_STATE_TRANSITION, 4,
- BD71828_INT_CHG_STATE_TRANSITION_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_CHG_STATE_TRANSITION, 4, BD71828_INT_CHG_STATE_TRANSITION_MASK),
/* Battery */
- REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_NORMAL, 5,
- BD71828_INT_BAT_TEMP_NORMAL_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_ERANGE, 5,
- BD71828_INT_BAT_TEMP_ERANGE_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_WARN, 5,
- BD71828_INT_BAT_TEMP_WARN_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_REMOVED, 5,
- BD71828_INT_BAT_REMOVED_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_DETECTED, 5,
- BD71828_INT_BAT_DETECTED_MASK),
- REGMAP_IRQ_REG(BD71828_INT_THERM_REMOVED, 5,
- BD71828_INT_THERM_REMOVED_MASK),
- REGMAP_IRQ_REG(BD71828_INT_THERM_DETECTED, 5,
- BD71828_INT_THERM_DETECTED_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_NORMAL, 5, BD71828_INT_BAT_TEMP_NORMAL_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_ERANGE, 5, BD71828_INT_BAT_TEMP_ERANGE_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_WARN, 5, BD71828_INT_BAT_TEMP_WARN_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_REMOVED, 5, BD71828_INT_BAT_REMOVED_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_DETECTED, 5, BD71828_INT_BAT_DETECTED_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_THERM_REMOVED, 5, BD71828_INT_THERM_REMOVED_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_THERM_DETECTED, 5, BD71828_INT_THERM_DETECTED_MASK),
/* Battery Mon 1 */
REGMAP_IRQ_REG(BD71828_INT_BAT_DEAD, 6, BD71828_INT_BAT_DEAD_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_RES, 6,
- BD71828_INT_BAT_SHORTC_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_DET, 6,
- BD71828_INT_BAT_SHORTC_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_RES, 6,
- BD71828_INT_BAT_LOW_VOLT_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_DET, 6,
- BD71828_INT_BAT_LOW_VOLT_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_RES, 6,
- BD71828_INT_BAT_OVER_VOLT_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_DET, 6,
- BD71828_INT_BAT_OVER_VOLT_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_RES, 6, BD71828_INT_BAT_SHORTC_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_DET, 6, BD71828_INT_BAT_SHORTC_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_RES, 6, BD71828_INT_BAT_LOW_VOLT_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_DET, 6, BD71828_INT_BAT_LOW_VOLT_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_RES, 6, BD71828_INT_BAT_OVER_VOLT_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_DET, 6, BD71828_INT_BAT_OVER_VOLT_DET_MASK),
/* Battery Mon 2 */
- REGMAP_IRQ_REG(BD71828_INT_BAT_MON_RES, 7,
- BD71828_INT_BAT_MON_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_MON_DET, 7,
- BD71828_INT_BAT_MON_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_MON_RES, 7, BD71828_INT_BAT_MON_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_MON_DET, 7, BD71828_INT_BAT_MON_DET_MASK),
/* Battery Mon 3 (Coulomb counter) */
- REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON1, 8,
- BD71828_INT_BAT_CC_MON1_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON2, 8,
- BD71828_INT_BAT_CC_MON2_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON3, 8,
- BD71828_INT_BAT_CC_MON3_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON1, 8, BD71828_INT_BAT_CC_MON1_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON2, 8, BD71828_INT_BAT_CC_MON2_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON3, 8, BD71828_INT_BAT_CC_MON3_MASK),
/* Battery Mon 4 */
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_RES, 9,
- BD71828_INT_BAT_OVER_CURR_1_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_DET, 9,
- BD71828_INT_BAT_OVER_CURR_1_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_RES, 9,
- BD71828_INT_BAT_OVER_CURR_2_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_DET, 9,
- BD71828_INT_BAT_OVER_CURR_2_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_RES, 9,
- BD71828_INT_BAT_OVER_CURR_3_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_DET, 9,
- BD71828_INT_BAT_OVER_CURR_3_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_RES, 9, BD71828_INT_BAT_OVER_CURR_1_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_DET, 9, BD71828_INT_BAT_OVER_CURR_1_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_RES, 9, BD71828_INT_BAT_OVER_CURR_2_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_DET, 9, BD71828_INT_BAT_OVER_CURR_2_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_RES, 9, BD71828_INT_BAT_OVER_CURR_3_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_DET, 9, BD71828_INT_BAT_OVER_CURR_3_DET_MASK),
/* Temperature */
- REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_RES, 10,
- BD71828_INT_TEMP_BAT_LOW_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_DET, 10,
- BD71828_INT_TEMP_BAT_LOW_DET_MASK),
- REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_RES, 10,
- BD71828_INT_TEMP_BAT_HI_RES_MASK),
- REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_DET, 10,
- BD71828_INT_TEMP_BAT_HI_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_RES, 10, BD71828_INT_TEMP_BAT_LOW_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_DET, 10, BD71828_INT_TEMP_BAT_LOW_DET_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_RES, 10, BD71828_INT_TEMP_BAT_HI_RES_MASK),
+ REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_DET, 10, BD71828_INT_TEMP_BAT_HI_DET_MASK),
REGMAP_IRQ_REG(BD71828_INT_TEMP_CHIP_OVER_125_RES, 10,
BD71828_INT_TEMP_CHIP_OVER_125_RES_MASK),
REGMAP_IRQ_REG(BD71828_INT_TEMP_CHIP_OVER_125_DET, 10,
@@ -267,57 +419,133 @@ static struct regmap_irq_chip bd71828_irq_chip = {
.init_ack_masked = true,
.num_regs = 12,
.num_main_regs = 1,
- .sub_reg_offsets = &bd71828_sub_irq_offsets[0],
+ .sub_reg_offsets = &bd718xx_sub_irq_offsets[0],
+ .num_main_status_bits = 8,
+ .irq_reg_stride = 1,
+};
+
+static struct regmap_irq_chip bd71815_irq_chip = {
+ .name = "bd71815_irq",
+ .main_status = BD71815_REG_INT_STAT,
+ .irqs = &bd71815_irqs[0],
+ .num_irqs = ARRAY_SIZE(bd71815_irqs),
+ .status_base = BD71815_REG_INT_STAT_01,
+ .mask_base = BD71815_REG_INT_EN_01,
+ .ack_base = BD71815_REG_INT_STAT_01,
+ .mask_invert = true,
+ .init_ack_masked = true,
+ .num_regs = 12,
+ .num_main_regs = 1,
+ .sub_reg_offsets = &bd718xx_sub_irq_offsets[0],
.num_main_status_bits = 8,
.irq_reg_stride = 1,
};
+static int set_clk_mode(struct device *dev, struct regmap *regmap,
+ int clkmode_reg)
+{
+ int ret;
+ unsigned int open_drain;
+
+ ret = of_property_read_u32(dev->of_node, "rohm,clkout-open-drain", &open_drain);
+ if (ret) {
+ if (ret == -EINVAL)
+ return 0;
+ return ret;
+ }
+ if (open_drain > 1) {
+ dev_err(dev, "bad clk32kout mode configuration");
+ return -EINVAL;
+ }
+
+ if (open_drain)
+ return regmap_update_bits(regmap, clkmode_reg, OUT32K_MODE,
+ OUT32K_MODE_OPEN_DRAIN);
+
+ return regmap_update_bits(regmap, clkmode_reg, OUT32K_MODE,
+ OUT32K_MODE_CMOS);
+}
+
static int bd71828_i2c_probe(struct i2c_client *i2c)
{
- struct rohm_regmap_dev *chip;
struct regmap_irq_chip_data *irq_data;
int ret;
+ struct regmap *regmap;
+ const struct regmap_config *regmap_config;
+ struct regmap_irq_chip *irqchip;
+ unsigned int chip_type;
+ struct mfd_cell *mfd;
+ int cells;
+ int button_irq;
+ int clkmode_reg;
if (!i2c->irq) {
dev_err(&i2c->dev, "No IRQ configured\n");
return -EINVAL;
}
- chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
- dev_set_drvdata(&i2c->dev, chip);
+ chip_type = (unsigned int)(uintptr_t)
+ of_device_get_match_data(&i2c->dev);
+ switch (chip_type) {
+ case ROHM_CHIP_TYPE_BD71828:
+ mfd = bd71828_mfd_cells;
+ cells = ARRAY_SIZE(bd71828_mfd_cells);
+ regmap_config = &bd71828_regmap;
+ irqchip = &bd71828_irq_chip;
+ clkmode_reg = BD71828_REG_OUT32K;
+ button_irq = BD71828_INT_SHORTPUSH;
+ break;
+ case ROHM_CHIP_TYPE_BD71815:
+ mfd = bd71815_mfd_cells;
+ cells = ARRAY_SIZE(bd71815_mfd_cells);
+ regmap_config = &bd71815_regmap;
+ irqchip = &bd71815_irq_chip;
+ clkmode_reg = BD71815_REG_OUT32K;
+ /*
+ * If BD71817 support is needed we should be able to handle it
+ * with proper DT configs + BD71815 drivers + power-button.
+ * BD71815 data-sheet does not list the power-button IRQ so we
+ * don't use it.
+ */
+ button_irq = 0;
+ break;
+ default:
+ dev_err(&i2c->dev, "Unknown device type");
+ return -EINVAL;
+ }
- chip->regmap = devm_regmap_init_i2c(i2c, &bd71828_regmap);
- if (IS_ERR(chip->regmap)) {
+ regmap = devm_regmap_init_i2c(i2c, regmap_config);
+ if (IS_ERR(regmap)) {
dev_err(&i2c->dev, "Failed to initialize Regmap\n");
- return PTR_ERR(chip->regmap);
+ return PTR_ERR(regmap);
}
- ret = devm_regmap_add_irq_chip(&i2c->dev, chip->regmap,
- i2c->irq, IRQF_ONESHOT, 0,
- &bd71828_irq_chip, &irq_data);
+ ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq,
+ IRQF_ONESHOT, 0, irqchip, &irq_data);
if (ret) {
dev_err(&i2c->dev, "Failed to add IRQ chip\n");
return ret;
}
dev_dbg(&i2c->dev, "Registered %d IRQs for chip\n",
- bd71828_irq_chip.num_irqs);
+ irqchip->num_irqs);
- ret = regmap_irq_get_virq(irq_data, BD71828_INT_SHORTPUSH);
- if (ret < 0) {
- dev_err(&i2c->dev, "Failed to get the power-key IRQ\n");
- return ret;
+ if (button_irq) {
+ ret = regmap_irq_get_virq(irq_data, button_irq);
+ if (ret < 0) {
+ dev_err(&i2c->dev, "Failed to get the power-key IRQ\n");
+ return ret;
+ }
+
+ button.irq = ret;
}
- button.irq = ret;
+ ret = set_clk_mode(&i2c->dev, regmap, clkmode_reg);
+ if (ret)
+ return ret;
- ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
- bd71828_mfd_cells,
- ARRAY_SIZE(bd71828_mfd_cells), NULL, 0,
- regmap_irq_get_domain(irq_data));
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells,
+ NULL, 0, regmap_irq_get_domain(irq_data));
if (ret)
dev_err(&i2c->dev, "Failed to create subdevices\n");
@@ -325,7 +553,13 @@ static int bd71828_i2c_probe(struct i2c_client *i2c)
}
static const struct of_device_id bd71828_of_match[] = {
- { .compatible = "rohm,bd71828", },
+ {
+ .compatible = "rohm,bd71828",
+ .data = (void *)ROHM_CHIP_TYPE_BD71828,
+ }, {
+ .compatible = "rohm,bd71815",
+ .data = (void *)ROHM_CHIP_TYPE_BD71815,
+ },
{ },
};
MODULE_DEVICE_TABLE(of, bd71828_of_match);
diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index c32c1b6c98fa..bfd81f78beae 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -91,9 +91,9 @@ static const struct regmap_config bd718xx_regmap_config = {
.cache_type = REGCACHE_RBTREE,
};
-static int bd718xx_init_press_duration(struct bd718xx *bd718xx)
+static int bd718xx_init_press_duration(struct regmap *regmap,
+ struct device *dev)
{
- struct device* dev = bd718xx->chip.dev;
u32 short_press_ms, long_press_ms;
u32 short_press_value, long_press_value;
int ret;
@@ -102,8 +102,7 @@ static int bd718xx_init_press_duration(struct bd718xx *bd718xx)
&short_press_ms);
if (!ret) {
short_press_value = min(15u, (short_press_ms + 250) / 500);
- ret = regmap_update_bits(bd718xx->chip.regmap,
- BD718XX_REG_PWRONCONFIG0,
+ ret = regmap_update_bits(regmap, BD718XX_REG_PWRONCONFIG0,
BD718XX_PWRBTN_PRESS_DURATION_MASK,
short_press_value);
if (ret) {
@@ -116,8 +115,7 @@ static int bd718xx_init_press_duration(struct bd718xx *bd718xx)
&long_press_ms);
if (!ret) {
long_press_value = min(15u, (long_press_ms + 500) / 1000);
- ret = regmap_update_bits(bd718xx->chip.regmap,
- BD718XX_REG_PWRONCONFIG1,
+ ret = regmap_update_bits(regmap, BD718XX_REG_PWRONCONFIG1,
BD718XX_PWRBTN_PRESS_DURATION_MASK,
long_press_value);
if (ret) {
@@ -132,7 +130,8 @@ static int bd718xx_init_press_duration(struct bd718xx *bd718xx)
static int bd718xx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
- struct bd718xx *bd718xx;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *irq_data;
int ret;
unsigned int chip_type;
struct mfd_cell *mfd;
@@ -142,13 +141,6 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
dev_err(&i2c->dev, "No IRQ configured\n");
return -EINVAL;
}
-
- bd718xx = devm_kzalloc(&i2c->dev, sizeof(struct bd718xx), GFP_KERNEL);
-
- if (!bd718xx)
- return -ENOMEM;
-
- bd718xx->chip_irq = i2c->irq;
chip_type = (unsigned int)(uintptr_t)
of_device_get_match_data(&i2c->dev);
switch (chip_type) {
@@ -164,29 +156,26 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
dev_err(&i2c->dev, "Unknown device type");
return -EINVAL;
}
- bd718xx->chip.dev = &i2c->dev;
- dev_set_drvdata(&i2c->dev, bd718xx);
- bd718xx->chip.regmap = devm_regmap_init_i2c(i2c,
- &bd718xx_regmap_config);
- if (IS_ERR(bd718xx->chip.regmap)) {
+ regmap = devm_regmap_init_i2c(i2c, &bd718xx_regmap_config);
+ if (IS_ERR(regmap)) {
dev_err(&i2c->dev, "regmap initialization failed\n");
- return PTR_ERR(bd718xx->chip.regmap);
+ return PTR_ERR(regmap);
}
- ret = devm_regmap_add_irq_chip(&i2c->dev, bd718xx->chip.regmap,
- bd718xx->chip_irq, IRQF_ONESHOT, 0,
- &bd718xx_irq_chip, &bd718xx->irq_data);
+ ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq,
+ IRQF_ONESHOT, 0, &bd718xx_irq_chip,
+ &irq_data);
if (ret) {
dev_err(&i2c->dev, "Failed to add irq_chip\n");
return ret;
}
- ret = bd718xx_init_press_duration(bd718xx);
+ ret = bd718xx_init_press_duration(regmap, &i2c->dev);
if (ret)
return ret;
- ret = regmap_irq_get_virq(bd718xx->irq_data, BD718XX_INT_PWRBTN_S);
+ ret = regmap_irq_get_virq(irq_data, BD718XX_INT_PWRBTN_S);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to get the IRQ\n");
@@ -195,9 +184,9 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
button.irq = ret;
- ret = devm_mfd_add_devices(bd718xx->chip.dev, PLATFORM_DEVID_AUTO,
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
mfd, cells, NULL, 0,
- regmap_irq_get_domain(bd718xx->irq_data));
+ regmap_irq_get_domain(irq_data));
if (ret)
dev_err(&i2c->dev, "Failed to create subdevices\n");
diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c
new file mode 100644
index 000000000000..6661a27d69a8
--- /dev/null
+++ b/drivers/mfd/rohm-bd9576.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 ROHM Semiconductors
+ *
+ * ROHM BD9576MUF and BD9573MUF PMIC driver
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+enum {
+ BD957X_REGULATOR_CELL,
+ BD957X_WDT_CELL,
+};
+
+/*
+ * Due to the BD9576MUF nasty IRQ behaiour we don't always populate IRQs.
+ * These will be added to regulator resources only if IRQ information for the
+ * PMIC is populated in device-tree.
+ */
+static const struct resource bd9576_regulator_irqs[] = {
+ DEFINE_RES_IRQ_NAMED(BD9576_INT_THERM, "bd9576-temp"),
+ DEFINE_RES_IRQ_NAMED(BD9576_INT_OVD, "bd9576-ovd"),
+ DEFINE_RES_IRQ_NAMED(BD9576_INT_UVD, "bd9576-uvd"),
+};
+
+static struct mfd_cell bd9573_mfd_cells[] = {
+ [BD957X_REGULATOR_CELL] = { .name = "bd9573-regulator", },
+ [BD957X_WDT_CELL] = { .name = "bd9576-wdt", },
+};
+
+static struct mfd_cell bd9576_mfd_cells[] = {
+ [BD957X_REGULATOR_CELL] = { .name = "bd9576-regulator", },
+ [BD957X_WDT_CELL] = { .name = "bd9576-wdt", },
+};
+
+static const struct regmap_range volatile_ranges[] = {
+ regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT),
+ regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT,
+ BD957X_REG_PMIC_INTERNAL_STAT),
+ regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT),
+ regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT),
+ regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT),
+};
+
+static const struct regmap_access_table volatile_regs = {
+ .yes_ranges = &volatile_ranges[0],
+ .n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config bd957x_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_table = &volatile_regs,
+ .max_register = BD957X_MAX_REGISTER,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static struct regmap_irq bd9576_irqs[] = {
+ REGMAP_IRQ_REG(BD9576_INT_THERM, 0, BD957X_MASK_INT_MAIN_THERM),
+ REGMAP_IRQ_REG(BD9576_INT_OVP, 0, BD957X_MASK_INT_MAIN_OVP),
+ REGMAP_IRQ_REG(BD9576_INT_SCP, 0, BD957X_MASK_INT_MAIN_SCP),
+ REGMAP_IRQ_REG(BD9576_INT_OCP, 0, BD957X_MASK_INT_MAIN_OCP),
+ REGMAP_IRQ_REG(BD9576_INT_OVD, 0, BD957X_MASK_INT_MAIN_OVD),
+ REGMAP_IRQ_REG(BD9576_INT_UVD, 0, BD957X_MASK_INT_MAIN_UVD),
+ REGMAP_IRQ_REG(BD9576_INT_UVP, 0, BD957X_MASK_INT_MAIN_UVP),
+ REGMAP_IRQ_REG(BD9576_INT_SYS, 0, BD957X_MASK_INT_MAIN_SYS),
+};
+
+static struct regmap_irq_chip bd9576_irq_chip = {
+ .name = "bd9576_irq",
+ .irqs = &bd9576_irqs[0],
+ .num_irqs = ARRAY_SIZE(bd9576_irqs),
+ .status_base = BD957X_REG_INT_MAIN_STAT,
+ .mask_base = BD957X_REG_INT_MAIN_MASK,
+ .ack_base = BD957X_REG_INT_MAIN_STAT,
+ .init_ack_masked = true,
+ .num_regs = 1,
+ .irq_reg_stride = 1,
+};
+
+static int bd957x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct regmap *regmap;
+ struct mfd_cell *cells;
+ int num_cells;
+ unsigned long chip_type;
+ struct irq_domain *domain;
+ bool usable_irqs;
+
+ chip_type = (unsigned long)of_device_get_match_data(&i2c->dev);
+
+ switch (chip_type) {
+ case ROHM_CHIP_TYPE_BD9576:
+ cells = bd9576_mfd_cells;
+ num_cells = ARRAY_SIZE(bd9576_mfd_cells);
+ usable_irqs = !!i2c->irq;
+ break;
+ case ROHM_CHIP_TYPE_BD9573:
+ cells = bd9573_mfd_cells;
+ num_cells = ARRAY_SIZE(bd9573_mfd_cells);
+ /*
+ * BD9573 only supports fatal IRQs which we can not handle
+ * because SoC is going to lose the power.
+ */
+ usable_irqs = false;
+ break;
+ default:
+ dev_err(&i2c->dev, "Unknown device type");
+ return -EINVAL;
+ }
+
+ regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap);
+ if (IS_ERR(regmap)) {
+ dev_err(&i2c->dev, "Failed to initialize Regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ /*
+ * BD9576 behaves badly. It kepts IRQ line asserted for the whole
+ * duration of detected HW condition (like over temperature). So we
+ * don't require IRQ to be populated.
+ * If IRQ information is not given, then we mask all IRQs and do not
+ * provide IRQ resources to regulator driver - which then just omits
+ * the notifiers.
+ */
+ if (usable_irqs) {
+ struct regmap_irq_chip_data *irq_data;
+ struct mfd_cell *regulators;
+
+ regulators = &bd9576_mfd_cells[BD957X_REGULATOR_CELL];
+ regulators->resources = bd9576_regulator_irqs;
+ regulators->num_resources = ARRAY_SIZE(bd9576_regulator_irqs);
+
+ ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq,
+ IRQF_ONESHOT, 0,
+ &bd9576_irq_chip, &irq_data);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to add IRQ chip\n");
+ return ret;
+ }
+ domain = regmap_irq_get_domain(irq_data);
+ } else {
+ ret = regmap_update_bits(regmap, BD957X_REG_INT_MAIN_MASK,
+ BD957X_MASK_INT_ALL,
+ BD957X_MASK_INT_ALL);
+ if (ret)
+ return ret;
+ domain = NULL;
+ }
+
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, cells,
+ num_cells, NULL, 0, domain);
+ if (ret)
+ dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+ return ret;
+}
+
+static const struct of_device_id bd957x_of_match[] = {
+ { .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, },
+ { .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bd957x_of_match);
+
+static struct i2c_driver bd957x_drv = {
+ .driver = {
+ .name = "rohm-bd957x",
+ .of_match_table = bd957x_of_match,
+ },
+ .probe = &bd957x_i2c_probe,
+};
+module_i2c_driver(bd957x_drv);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 95473ff9bb4b..8d55992da19e 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -549,19 +549,7 @@ static struct i2c_driver sec_pmic_driver = {
.shutdown = sec_pmic_shutdown,
.id_table = sec_pmic_id,
};
-
-static int __init sec_pmic_init(void)
-{
- return i2c_add_driver(&sec_pmic_driver);
-}
-
-subsys_initcall(sec_pmic_init);
-
-static void __exit sec_pmic_exit(void)
-{
- i2c_del_driver(&sec_pmic_driver);
-}
-module_exit(sec_pmic_exit);
+module_i2c_driver(sec_pmic_driver);
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_DESCRIPTION("Core support for the S5M MFD");
diff --git a/drivers/mfd/stm32-timers.c b/drivers/mfd/stm32-timers.c
index add603359124..44ed2fce0319 100644
--- a/drivers/mfd/stm32-timers.c
+++ b/drivers/mfd/stm32-timers.c
@@ -158,13 +158,18 @@ static const struct regmap_config stm32_timers_regmap_cfg = {
static void stm32_timers_get_arr_size(struct stm32_timers *ddata)
{
+ u32 arr;
+
+ /* Backup ARR to restore it after getting the maximum value */
+ regmap_read(ddata->regmap, TIM_ARR, &arr);
+
/*
* Only the available bits will be written so when readback
* we get the maximum value of auto reload register
*/
regmap_write(ddata->regmap, TIM_ARR, ~0L);
regmap_read(ddata->regmap, TIM_ARR, &ddata->max_arr);
- regmap_write(ddata->regmap, TIM_ARR, 0x0);
+ regmap_write(ddata->regmap, TIM_ARR, arr);
}
static int stm32_timers_dma_probe(struct device *dev,
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 90f3292230c9..1dd39483e7c1 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -312,7 +312,7 @@ EXPORT_SYMBOL_GPL(stmpe_set_altfunc);
* GPIO (all variants)
*/
-static const struct resource stmpe_gpio_resources[] = {
+static struct resource stmpe_gpio_resources[] = {
/* Start and end filled dynamically */
{
.flags = IORESOURCE_IRQ,
@@ -336,7 +336,8 @@ static const struct mfd_cell stmpe_gpio_cell_noirq = {
* Keypad (1601, 2401, 2403)
*/
-static const struct resource stmpe_keypad_resources[] = {
+static struct resource stmpe_keypad_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "KEYPAD",
.flags = IORESOURCE_IRQ,
@@ -357,7 +358,8 @@ static const struct mfd_cell stmpe_keypad_cell = {
/*
* PWM (1601, 2401, 2403)
*/
-static const struct resource stmpe_pwm_resources[] = {
+static struct resource stmpe_pwm_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "PWM0",
.flags = IORESOURCE_IRQ,
@@ -445,7 +447,8 @@ static struct stmpe_variant_info stmpe801_noirq = {
* Touchscreen (STMPE811 or STMPE610)
*/
-static const struct resource stmpe_ts_resources[] = {
+static struct resource stmpe_ts_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "TOUCH_DET",
.flags = IORESOURCE_IRQ,
@@ -467,7 +470,8 @@ static const struct mfd_cell stmpe_ts_cell = {
* ADC (STMPE811)
*/
-static const struct resource stmpe_adc_resources[] = {
+static struct resource stmpe_adc_resources[] = {
+ /* Start and end filled dynamically */
{
.name = "STMPE_TEMP_SENS",
.flags = IORESOURCE_IRQ,
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 43d9f1884cd3..d3371ac7b871 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -393,6 +393,14 @@ config PWM_MXS
To compile this driver as a module, choose M here: the module
will be called pwm-mxs.
+config PWM_NTXEC
+ tristate "Netronix embedded controller PWM support"
+ depends on MFD_NTXEC
+ help
+ Say yes here if you want to support the PWM output of the embedded
+ controller found in certain e-book readers designed by the original
+ design manufacturer Netronix.
+
config PWM_OMAP_DMTIMER
tristate "OMAP Dual-Mode Timer PWM support"
depends on OF
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 211db810c439..d3879619bd76 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_MESON) += pwm-meson.o
obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
+obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
diff --git a/drivers/pwm/pwm-ntxec.c b/drivers/pwm/pwm-ntxec.c
new file mode 100644
index 000000000000..50c454c553c4
--- /dev/null
+++ b/drivers/pwm/pwm-ntxec.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements PWM output.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ *
+ * Limitations:
+ * - The get_state callback is not implemented, because the current state of
+ * the PWM output can't be read back from the hardware.
+ * - The hardware can only generate normal polarity output.
+ * - The period and duty cycle can't be changed together in one atomic action.
+ */
+
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct ntxec_pwm {
+ struct device *dev;
+ struct ntxec *ec;
+ struct pwm_chip chip;
+};
+
+static struct ntxec_pwm *ntxec_pwm_from_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct ntxec_pwm, chip);
+}
+
+#define NTXEC_REG_AUTO_OFF_HI 0xa1
+#define NTXEC_REG_AUTO_OFF_LO 0xa2
+#define NTXEC_REG_ENABLE 0xa3
+#define NTXEC_REG_PERIOD_LOW 0xa4
+#define NTXEC_REG_PERIOD_HIGH 0xa5
+#define NTXEC_REG_DUTY_LOW 0xa6
+#define NTXEC_REG_DUTY_HIGH 0xa7
+
+/*
+ * The time base used in the EC is 8MHz, or 125ns. Period and duty cycle are
+ * measured in this unit.
+ */
+#define TIME_BASE_NS 125
+
+/*
+ * The maximum input value (in nanoseconds) is determined by the time base and
+ * the range of the hardware registers that hold the converted value.
+ * It fits into 32 bits, so we can do our calculations in 32 bits as well.
+ */
+#define MAX_PERIOD_NS (TIME_BASE_NS * 0xffff)
+
+static int ntxec_pwm_set_raw_period_and_duty_cycle(struct pwm_chip *chip,
+ int period, int duty)
+{
+ struct ntxec_pwm *priv = ntxec_pwm_from_chip(chip);
+
+ /*
+ * Changes to the period and duty cycle take effect as soon as the
+ * corresponding low byte is written, so the hardware may be configured
+ * to an inconsistent state after the period is written and before the
+ * duty cycle is fully written. If, in such a case, the old duty cycle
+ * is longer than the new period, the EC may output 100% for a moment.
+ *
+ * To minimize the time between the changes to period and duty cycle
+ * taking effect, the writes are interleaved.
+ */
+
+ struct reg_sequence regs[] = {
+ { NTXEC_REG_PERIOD_HIGH, ntxec_reg8(period >> 8) },
+ { NTXEC_REG_DUTY_HIGH, ntxec_reg8(duty >> 8) },
+ { NTXEC_REG_PERIOD_LOW, ntxec_reg8(period) },
+ { NTXEC_REG_DUTY_LOW, ntxec_reg8(duty) },
+ };
+
+ return regmap_multi_reg_write(priv->ec->regmap, regs, ARRAY_SIZE(regs));
+}
+
+static int ntxec_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm_dev,
+ const struct pwm_state *state)
+{
+ struct ntxec_pwm *priv = ntxec_pwm_from_chip(chip);
+ unsigned int period, duty;
+ int res;
+
+ if (state->polarity != PWM_POLARITY_NORMAL)
+ return -EINVAL;
+
+ period = min_t(u64, state->period, MAX_PERIOD_NS);
+ duty = min_t(u64, state->duty_cycle, period);
+
+ period /= TIME_BASE_NS;
+ duty /= TIME_BASE_NS;
+
+ /*
+ * Writing a duty cycle of zero puts the device into a state where
+ * writing a higher duty cycle doesn't result in the brightness that it
+ * usually results in. This can be fixed by cycling the ENABLE register.
+ *
+ * As a workaround, write ENABLE=0 when the duty cycle is zero.
+ * The case that something has previously set the duty cycle to zero
+ * but ENABLE=1, is not handled.
+ */
+ if (state->enabled && duty != 0) {
+ res = ntxec_pwm_set_raw_period_and_duty_cycle(chip, period, duty);
+ if (res)
+ return res;
+
+ res = regmap_write(priv->ec->regmap, NTXEC_REG_ENABLE, ntxec_reg8(1));
+ if (res)
+ return res;
+
+ /* Disable the auto-off timer */
+ res = regmap_write(priv->ec->regmap, NTXEC_REG_AUTO_OFF_HI, ntxec_reg8(0xff));
+ if (res)
+ return res;
+
+ return regmap_write(priv->ec->regmap, NTXEC_REG_AUTO_OFF_LO, ntxec_reg8(0xff));
+ } else {
+ return regmap_write(priv->ec->regmap, NTXEC_REG_ENABLE, ntxec_reg8(0));
+ }
+}
+
+static const struct pwm_ops ntxec_pwm_ops = {
+ .owner = THIS_MODULE,
+ .apply = ntxec_pwm_apply,
+ /*
+ * No .get_state callback, because the current state cannot be read
+ * back from the hardware.
+ */
+};
+
+static int ntxec_pwm_probe(struct platform_device *pdev)
+{
+ struct ntxec *ec = dev_get_drvdata(pdev->dev.parent);
+ struct ntxec_pwm *priv;
+ struct pwm_chip *chip;
+
+ pdev->dev.of_node = pdev->dev.parent->of_node;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->ec = ec;
+ priv->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, priv);
+
+ chip = &priv->chip;
+ chip->dev = &pdev->dev;
+ chip->ops = &ntxec_pwm_ops;
+ chip->base = -1;
+ chip->npwm = 1;
+
+ return pwmchip_add(chip);
+}
+
+static int ntxec_pwm_remove(struct platform_device *pdev)
+{
+ struct ntxec_pwm *priv = platform_get_drvdata(pdev);
+ struct pwm_chip *chip = &priv->chip;
+
+ return pwmchip_remove(chip);
+}
+
+static struct platform_driver ntxec_pwm_driver = {
+ .driver = {
+ .name = "ntxec-pwm",
+ },
+ .probe = ntxec_pwm_probe,
+ .remove = ntxec_pwm_remove,
+};
+module_platform_driver(ntxec_pwm_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("PWM driver for Netronix EC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntxec-pwm");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index ea1d284741cb..9d84d9245490 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -204,6 +204,17 @@ config REGULATOR_BD70528
This driver can also be built as a module. If so, the module
will be called bd70528-regulator.
+config REGULATOR_BD71815
+ tristate "ROHM BD71815 Power Regulator"
+ depends on MFD_ROHM_BD71828
+ help
+ This driver supports voltage regulators on ROHM BD71815 PMIC.
+ This will enable support for the software controllable buck
+ and LDO regulators and a current regulator for LEDs.
+
+ This driver can also be built as a module. If so, the module
+ will be called bd71815-regulator.
+
config REGULATOR_BD71828
tristate "ROHM BD71828 Power Regulator"
depends on MFD_ROHM_BD71828
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 11c145886c98..580b015296ea 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
+obj-$(CONFIG_REGULATOR_BD71815) += bd71815-regulator.o
obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o
obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c
new file mode 100644
index 000000000000..a4e8d5e36b40
--- /dev/null
+++ b/drivers/regulator/bd71815-regulator.c
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright 2014 Embest Technology Co. Ltd. Inc.
+// bd71815-regulator.c ROHM BD71815 regulator driver
+//
+// Author: Tony Luo <luofc@embedinfo.com>
+//
+// Partially rewritten at 2021 by
+// Matti Vaittinen <matti.vaitinen@fi.rohmeurope.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/mfd/rohm-bd71815.h>
+#include <linux/regulator/of_regulator.h>
+
+struct bd71815_regulator {
+ struct regulator_desc desc;
+ const struct rohm_dvs_config *dvs;
+};
+
+struct bd71815_pmic {
+ struct bd71815_regulator descs[BD71815_REGULATOR_CNT];
+ struct regmap *regmap;
+ struct device *dev;
+ struct gpio_descs *gps;
+ struct regulator_dev *rdev[BD71815_REGULATOR_CNT];
+};
+
+static const int bd7181x_wled_currents[] = {
+ 10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000,
+ 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000,
+ 16000, 17000, 18000, 19000, 20000, 21000, 22000, 23000, 24000, 25000,
+};
+
+static const struct rohm_dvs_config buck1_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK1_VOLT_H,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_reg = BD71815_REG_BUCK1_VOLT_L,
+ .suspend_mask = BD71815_VOLT_MASK,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_reg = BD71815_REG_BUCK1_VOLT_L,
+ .lpsr_mask = BD71815_VOLT_MASK,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck2_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK2_VOLT_H,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_reg = BD71815_REG_BUCK2_VOLT_L,
+ .suspend_mask = BD71815_VOLT_MASK,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_reg = BD71815_REG_BUCK2_VOLT_L,
+ .lpsr_mask = BD71815_VOLT_MASK,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck3_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK3_VOLT,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck4_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK4_VOLT,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo1_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE1,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO1_RUN_ON,
+ .snvs_on_mask = LDO1_SNVS_ON,
+ .suspend_on_mask = LDO1_SUSP_ON,
+ .lpsr_on_mask = LDO1_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo2_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE2,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO2_RUN_ON,
+ .snvs_on_mask = LDO2_SNVS_ON,
+ .suspend_on_mask = LDO2_SUSP_ON,
+ .lpsr_on_mask = LDO2_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo3_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE2,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO3_RUN_ON,
+ .snvs_on_mask = LDO3_SNVS_ON,
+ .suspend_on_mask = LDO3_SUSP_ON,
+ .lpsr_on_mask = LDO3_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo4_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE3,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO4_RUN_ON,
+ .snvs_on_mask = LDO4_SNVS_ON,
+ .suspend_on_mask = LDO4_SUSP_ON,
+ .lpsr_on_mask = LDO4_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldo5_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_LDO_MODE3,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = LDO5_RUN_ON,
+ .snvs_on_mask = LDO5_SNVS_ON,
+ .suspend_on_mask = LDO5_SUSP_ON,
+ .lpsr_on_mask = LDO5_LPSR_ON,
+};
+
+static const struct rohm_dvs_config dvref_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_on_mask = DVREF_RUN_ON,
+ .snvs_on_mask = DVREF_SNVS_ON,
+ .suspend_on_mask = DVREF_SUSP_ON,
+ .lpsr_on_mask = DVREF_LPSR_ON,
+};
+
+static const struct rohm_dvs_config ldolpsr_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_on_mask = DVREF_RUN_ON,
+ .snvs_on_mask = DVREF_SNVS_ON,
+ .suspend_on_mask = DVREF_SUSP_ON,
+ .lpsr_on_mask = DVREF_LPSR_ON,
+};
+
+static const struct rohm_dvs_config buck5_dvs = {
+ .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS |
+ ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR,
+ .run_reg = BD71815_REG_BUCK5_VOLT,
+ .run_mask = BD71815_VOLT_MASK,
+ .run_on_mask = BD71815_BUCK_RUN_ON,
+ .snvs_on_mask = BD71815_BUCK_SNVS_ON,
+ .suspend_on_mask = BD71815_BUCK_SUSP_ON,
+ .lpsr_on_mask = BD71815_BUCK_LPSR_ON,
+};
+
+static int set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ struct bd71815_regulator *data;
+
+ data = container_of(desc, struct bd71815_regulator, desc);
+ return rohm_regulator_set_dvs_levels(data->dvs, np, desc, cfg->regmap);
+}
+
+/*
+ * Bucks 1 and 2 have two voltage selection registers where selected
+ * voltage can be set. Which of the registers is used can be either controlled
+ * by a control bit in register - or by HW state. If HW state specific voltages
+ * are given - then we assume HW state based control should be used.
+ *
+ * If volatge value is updated to currently selected register - then output
+ * voltage is immediately changed no matter what is set as ramp rate. Thus we
+ * default changing voltage by writing new value to inactive register and
+ * then updating the 'register selection' bit. This naturally only works when
+ * HW state machine is not used to select the voltage.
+ */
+static int buck12_set_hw_dvs_levels(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *cfg)
+{
+ struct bd71815_regulator *data;
+ int ret = 0, val;
+
+ data = container_of(desc, struct bd71815_regulator, desc);
+
+ if (of_find_property(np, "rohm,dvs-run-voltage", NULL) ||
+ of_find_property(np, "rohm,dvs-suspend-voltage", NULL) ||
+ of_find_property(np, "rohm,dvs-lpsr-voltage", NULL) ||
+ of_find_property(np, "rohm,dvs-snvs-voltage", NULL)) {
+ ret = regmap_read(cfg->regmap, desc->vsel_reg, &val);
+ if (ret)
+ return ret;
+
+ if (!(BD71815_BUCK_STBY_DVS & val) &&
+ !(BD71815_BUCK_DVSSEL & val)) {
+ int val2;
+
+ /*
+ * We are currently using voltage from _L.
+ * We'd better copy it to _H and switch to it to
+ * avoid shutting us down if LPSR or SUSPEND is set to
+ * disabled. _L value is at reg _H + 1
+ */
+ ret = regmap_read(cfg->regmap, desc->vsel_reg + 1,
+ &val2);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(cfg->regmap, desc->vsel_reg,
+ BD71815_VOLT_MASK |
+ BD71815_BUCK_DVSSEL,
+ val2 | BD71815_BUCK_DVSSEL);
+ if (ret)
+ return ret;
+ }
+ ret = rohm_regulator_set_dvs_levels(data->dvs, np, desc,
+ cfg->regmap);
+ if (ret)
+ return ret;
+ /*
+ * DVS levels were given => use HW-state machine for voltage
+ * controls. NOTE: AFAIK, This means that if voltage is changed
+ * by SW the ramp-rate is not respected. Should we disable
+ * SW voltage control when the HW state machine is used?
+ */
+ ret = regmap_update_bits(cfg->regmap, desc->vsel_reg,
+ BD71815_BUCK_STBY_DVS,
+ BD71815_BUCK_STBY_DVS);
+ }
+
+ return ret;
+}
+
+/*
+ * BUCK1/2
+ * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
+ * 00: 10.00mV/usec 10mV 1uS
+ * 01: 5.00mV/usec 10mV 2uS
+ * 10: 2.50mV/usec 10mV 4uS
+ * 11: 1.25mV/usec 10mV 8uS
+ */
+static const unsigned int bd7181x_ramp_table[] = { 1250, 2500, 5000, 10000 };
+
+static int bd7181x_led_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ int ret;
+ int onstatus;
+
+ onstatus = regulator_is_enabled_regmap(rdev);
+
+ ret = regulator_set_current_limit_regmap(rdev, min_uA, max_uA);
+ if (!ret) {
+ int newstatus;
+
+ newstatus = regulator_is_enabled_regmap(rdev);
+ if (onstatus != newstatus) {
+ /*
+ * HW FIX: spurious led status change detected. Toggle
+ * state as a workaround
+ */
+ if (onstatus)
+ ret = regulator_enable_regmap(rdev);
+ else
+ ret = regulator_disable_regmap(rdev);
+
+ if (ret)
+ dev_err(rdev_get_dev(rdev),
+ "failed to revert the LED state (%d)\n",
+ ret);
+ }
+ }
+
+ return ret;
+}
+
+static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
+ int rid = rdev_get_id(rdev);
+ int ret, regh, regl, val;
+
+ regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2;
+ regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2;
+
+ ret = regmap_read(pmic->regmap, regh, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * If we use HW state machine based voltage reg selection - then we
+ * return BD71815_REG_BUCK1_VOLT_H which is used at RUN.
+ * Else we do return the BD71815_REG_BUCK1_VOLT_H or
+ * BD71815_REG_BUCK1_VOLT_L depending on which is selected to be used
+ * by BD71815_BUCK_DVSSEL bit
+ */
+ if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL)))
+ ret = regmap_read(pmic->regmap, regl, &val);
+
+ if (ret)
+ return ret;
+
+ return val & BD71815_VOLT_MASK;
+}
+
+/*
+ * For Buck 1/2.
+ */
+static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int sel)
+{
+ struct bd71815_pmic *pmic = rdev_get_drvdata(rdev);
+ int rid = rdev_get_id(rdev);
+ int ret, val, reg, regh, regl;
+
+ regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2;
+ regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2;
+
+ ret = regmap_read(pmic->regmap, regh, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * If bucks 1 & 2 are controlled by state machine - then the RUN state
+ * voltage is set to BD71815_REG_BUCK1_VOLT_H. Changing SUSPEND/LPSR
+ * voltages at runtime is not supported by this driver.
+ */
+ if (((val & BD71815_BUCK_STBY_DVS))) {
+ return regmap_update_bits(pmic->regmap, regh, BD71815_VOLT_MASK,
+ sel);
+ }
+ /* Update new voltage to the register which is not selected now */
+ if (val & BD71815_BUCK_DVSSEL)
+ reg = regl;
+ else
+ reg = regh;
+
+ ret = regmap_update_bits(pmic->regmap, reg, BD71815_VOLT_MASK, sel);
+ if (ret)
+ return ret;
+
+ /* Select the other DVS register to be used */
+ return regmap_update_bits(pmic->regmap, regh, BD71815_BUCK_DVSSEL, ~val);
+}
+
+static const struct regulator_ops bd7181x_ldo_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops bd7181x_fixed_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static const struct regulator_ops bd7181x_buck_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static const struct regulator_ops bd7181x_buck12_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = bd7181x_buck12_set_voltage_sel,
+ .get_voltage_sel = bd7181x_buck12_get_voltage_sel,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
+};
+
+static const struct regulator_ops bd7181x_led_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_current_limit = bd7181x_led_set_current_limit,
+ .get_current_limit = regulator_get_current_limit_regmap,
+};
+
+#define BD71815_FIXED_REG(_name, _id, ereg, emsk, voltage, _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = 1, \
+ .ops = &bd7181x_fixed_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (voltage), \
+ .enable_reg = (ereg), \
+ .enable_mask = (emsk), \
+ .of_parse_cb = set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+#define BD71815_BUCK_REG(_name, _id, vsel, ereg, min, max, step, _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &bd7181x_buck_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (vsel), \
+ .vsel_mask = BD71815_VOLT_MASK, \
+ .enable_reg = (ereg), \
+ .enable_mask = BD71815_BUCK_RUN_ON, \
+ .of_parse_cb = set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+#define BD71815_BUCK12_REG(_name, _id, vsel, ereg, min, max, step, \
+ _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &bd7181x_buck12_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (vsel), \
+ .vsel_mask = 0x3f, \
+ .enable_reg = (ereg), \
+ .enable_mask = 0x04, \
+ .ramp_reg = (ereg), \
+ .ramp_mask = BD71815_BUCK_RAMPRATE_MASK, \
+ .ramp_delay_table = bd7181x_ramp_table, \
+ .n_ramp_values = ARRAY_SIZE(bd7181x_ramp_table),\
+ .of_parse_cb = buck12_set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+#define BD71815_LED_REG(_name, _id, csel, mask, ereg, emsk, currents) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_current_limits = ARRAY_SIZE(currents), \
+ .ops = &bd7181x_led_regulator_ops, \
+ .type = REGULATOR_CURRENT, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .curr_table = currents, \
+ .csel_reg = (csel), \
+ .csel_mask = (mask), \
+ .enable_reg = (ereg), \
+ .enable_mask = (emsk), \
+ }, \
+ }
+
+#define BD71815_LDO_REG(_name, _id, vsel, ereg, emsk, min, max, step, \
+ _dvs) \
+ [(_id)] = { \
+ .desc = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .n_voltages = ((max) - (min)) / (step) + 1, \
+ .ops = &bd7181x_ldo_regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = (_id), \
+ .owner = THIS_MODULE, \
+ .min_uV = (min), \
+ .uV_step = (step), \
+ .vsel_reg = (vsel), \
+ .vsel_mask = BD71815_VOLT_MASK, \
+ .enable_reg = (ereg), \
+ .enable_mask = (emsk), \
+ .of_parse_cb = set_hw_dvs_levels, \
+ }, \
+ .dvs = (_dvs), \
+ }
+
+static struct bd71815_regulator bd71815_regulators[] = {
+ BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H,
+ BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000,
+ &buck1_dvs),
+ BD71815_BUCK12_REG(buck2, BD71815_BUCK2, BD71815_REG_BUCK2_VOLT_H,
+ BD71815_REG_BUCK2_MODE, 800000, 2000000, 25000,
+ &buck2_dvs),
+ BD71815_BUCK_REG(buck3, BD71815_BUCK3, BD71815_REG_BUCK3_VOLT,
+ BD71815_REG_BUCK3_MODE, 1200000, 2700000, 50000,
+ &buck3_dvs),
+ BD71815_BUCK_REG(buck4, BD71815_BUCK4, BD71815_REG_BUCK4_VOLT,
+ BD71815_REG_BUCK4_MODE, 1100000, 1850000, 25000,
+ &buck4_dvs),
+ BD71815_BUCK_REG(buck5, BD71815_BUCK5, BD71815_REG_BUCK5_VOLT,
+ BD71815_REG_BUCK5_MODE, 1800000, 3300000, 50000,
+ &buck5_dvs),
+ BD71815_LDO_REG(ldo1, BD71815_LDO1, BD71815_REG_LDO1_VOLT,
+ BD71815_REG_LDO_MODE1, LDO1_RUN_ON, 800000, 3300000,
+ 50000, &ldo1_dvs),
+ BD71815_LDO_REG(ldo2, BD71815_LDO2, BD71815_REG_LDO2_VOLT,
+ BD71815_REG_LDO_MODE2, LDO2_RUN_ON, 800000, 3300000,
+ 50000, &ldo2_dvs),
+ /*
+ * Let's default LDO3 to be enabled by SW. We can override ops if DT
+ * says LDO3 should be enabled by HW when DCIN is connected.
+ */
+ BD71815_LDO_REG(ldo3, BD71815_LDO3, BD71815_REG_LDO3_VOLT,
+ BD71815_REG_LDO_MODE2, LDO3_RUN_ON, 800000, 3300000,
+ 50000, &ldo3_dvs),
+ BD71815_LDO_REG(ldo4, BD71815_LDO4, BD71815_REG_LDO4_VOLT,
+ BD71815_REG_LDO_MODE3, LDO4_RUN_ON, 800000, 3300000,
+ 50000, &ldo4_dvs),
+ BD71815_LDO_REG(ldo5, BD71815_LDO5, BD71815_REG_LDO5_VOLT_H,
+ BD71815_REG_LDO_MODE3, LDO5_RUN_ON, 800000, 3300000,
+ 50000, &ldo5_dvs),
+ BD71815_FIXED_REG(ldodvref, BD71815_LDODVREF, BD71815_REG_LDO_MODE4,
+ DVREF_RUN_ON, 3000000, &dvref_dvs),
+ BD71815_FIXED_REG(ldolpsr, BD71815_LDOLPSR, BD71815_REG_LDO_MODE4,
+ LDO_LPSR_RUN_ON, 1800000, &ldolpsr_dvs),
+ BD71815_LED_REG(wled, BD71815_WLED, BD71815_REG_LED_DIMM, LED_DIMM_MASK,
+ BD71815_REG_LED_CTRL, LED_RUN_ON,
+ bd7181x_wled_currents),
+};
+
+static int bd7181x_probe(struct platform_device *pdev)
+{
+ struct bd71815_pmic *pmic;
+ struct regulator_config config = {};
+ int i, ret;
+ struct gpio_desc *ldo4_en;
+
+ pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
+ if (!pmic)
+ return -ENOMEM;
+
+ memcpy(pmic->descs, bd71815_regulators, sizeof(pmic->descs));
+
+ pmic->dev = &pdev->dev;
+ pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!pmic->regmap) {
+ dev_err(pmic->dev, "No parent regmap\n");
+ return -ENODEV;
+ }
+ platform_set_drvdata(pdev, pmic);
+ ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev,
+ pdev->dev.parent->of_node,
+ "rohm,vsel-gpios", 0,
+ GPIOD_ASIS, "ldo4-en");
+
+ if (IS_ERR(ldo4_en)) {
+ ret = PTR_ERR(ldo4_en);
+ if (ret != -ENOENT)
+ return ret;
+ ldo4_en = NULL;
+ }
+
+ /* Disable to go to ship-mode */
+ ret = regmap_update_bits(pmic->regmap, BD71815_REG_PWRCTRL,
+ RESTARTEN, 0);
+ if (ret)
+ return ret;
+
+ config.dev = pdev->dev.parent;
+ config.regmap = pmic->regmap;
+
+ for (i = 0; i < BD71815_REGULATOR_CNT; i++) {
+ struct regulator_desc *desc;
+ struct regulator_dev *rdev;
+
+ desc = &pmic->descs[i].desc;
+ if (i == BD71815_LDO4)
+ config.ena_gpiod = ldo4_en;
+
+ config.driver_data = pmic;
+
+ rdev = devm_regulator_register(&pdev->dev, desc, &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev,
+ "failed to register %s regulator\n",
+ desc->name);
+ return PTR_ERR(rdev);
+ }
+ config.ena_gpiod = NULL;
+ pmic->rdev[i] = rdev;
+ }
+ return 0;
+}
+
+static const struct platform_device_id bd7181x_pmic_id[] = {
+ { "bd71815-pmic", ROHM_CHIP_TYPE_BD71815 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, bd7181x_pmic_id);
+
+static struct platform_driver bd7181x_regulator = {
+ .driver = {
+ .name = "bd7181x-pmic",
+ .owner = THIS_MODULE,
+ },
+ .probe = bd7181x_probe,
+ .id_table = bd7181x_pmic_id,
+};
+module_platform_driver(bd7181x_regulator);
+
+MODULE_AUTHOR("Tony Luo <luofc@embedinfo.com>");
+MODULE_DESCRIPTION("BD71815 voltage regulator driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bd7181x-pmic");
diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c
index 6b12e963ed8f..a4f09a5a30ca 100644
--- a/drivers/regulator/bd71828-regulator.c
+++ b/drivers/regulator/bd71828-regulator.c
@@ -90,38 +90,7 @@ static const struct linear_range bd71828_ldo_volts[] = {
REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0),
};
-static int bd71828_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-{
- unsigned int val;
-
- switch (ramp_delay) {
- case 1 ... 2500:
- val = 0;
- break;
- case 2501 ... 5000:
- val = 1;
- break;
- case 5001 ... 10000:
- val = 2;
- break;
- case 10001 ... 20000:
- val = 3;
- break;
- default:
- val = 3;
- dev_err(&rdev->dev,
- "ramp_delay: %d not supported, setting 20mV/uS",
- ramp_delay);
- }
-
- /*
- * On BD71828 the ramp delay level control reg is at offset +2 to
- * enable reg
- */
- return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg + 2,
- BD71828_MASK_RAMP_DELAY,
- val << (ffs(BD71828_MASK_RAMP_DELAY) - 1));
-}
+static const unsigned int bd71828_ramp_delay[] = { 2500, 5000, 10000, 20000 };
static int buck_set_hw_dvs_levels(struct device_node *np,
const struct regulator_desc *desc,
@@ -185,7 +154,7 @@ static const struct regulator_ops bd71828_dvs_buck_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = bd71828_set_ramp_delay,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
};
static const struct regulator_ops bd71828_ldo_ops = {
@@ -219,6 +188,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
.enable_mask = BD71828_MASK_RUN_EN,
.vsel_reg = BD71828_REG_BUCK1_VOLT,
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+ .ramp_delay_table = bd71828_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay),
+ .ramp_reg = BD71828_REG_BUCK1_MODE,
+ .ramp_mask = BD71828_MASK_RAMP_DELAY,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -261,6 +234,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
.enable_mask = BD71828_MASK_RUN_EN,
.vsel_reg = BD71828_REG_BUCK2_VOLT,
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+ .ramp_delay_table = bd71828_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay),
+ .ramp_reg = BD71828_REG_BUCK2_MODE,
+ .ramp_mask = BD71828_MASK_RAMP_DELAY,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -421,6 +398,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
.enable_mask = BD71828_MASK_RUN_EN,
.vsel_reg = BD71828_REG_BUCK6_VOLT,
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+ .ramp_delay_table = bd71828_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay),
+ .ramp_reg = BD71828_REG_BUCK6_MODE,
+ .ramp_mask = BD71828_MASK_RAMP_DELAY,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -458,6 +439,10 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
.enable_mask = BD71828_MASK_RUN_EN,
.vsel_reg = BD71828_REG_BUCK7_VOLT,
.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+ .ramp_delay_table = bd71828_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd71828_ramp_delay),
+ .ramp_reg = BD71828_REG_BUCK7_MODE,
+ .ramp_mask = BD71828_MASK_RAMP_DELAY,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 8ff47ea522d6..e61295b30503 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -86,37 +86,7 @@ static const struct regulator_ops BD718XX_HWOPNAME(name) = { \
* 10: 2.50mV/usec 10mV 4uS
* 11: 1.25mV/usec 10mV 8uS
*/
-static int bd718xx_buck1234_set_ramp_delay(struct regulator_dev *rdev,
- int ramp_delay)
-{
- int id = rdev_get_id(rdev);
- unsigned int ramp_value;
-
- dev_dbg(&rdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1,
- ramp_delay);
- switch (ramp_delay) {
- case 1 ... 1250:
- ramp_value = BUCK_RAMPRATE_1P25MV;
- break;
- case 1251 ... 2500:
- ramp_value = BUCK_RAMPRATE_2P50MV;
- break;
- case 2501 ... 5000:
- ramp_value = BUCK_RAMPRATE_5P00MV;
- break;
- case 5001 ... 10000:
- ramp_value = BUCK_RAMPRATE_10P00MV;
- break;
- default:
- ramp_value = BUCK_RAMPRATE_10P00MV;
- dev_err(&rdev->dev,
- "%s: ramp_delay: %d not supported, setting 10000mV//us\n",
- rdev->desc->name, ramp_delay);
- }
-
- return regmap_update_bits(rdev->regmap, BD718XX_REG_BUCK1_CTRL + id,
- BUCK_RAMPRATE_MASK, ramp_value << 6);
-}
+static const unsigned int bd718xx_ramp_delay[] = { 10000, 5000, 2500, 1250 };
/* These functions are used when regulators are under HW state machine control.
* We assume PMIC is in RUN state because SW running and able to query the
@@ -378,7 +348,7 @@ static const struct regulator_ops bd71837_buck34_ops_hwctrl = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_ramp_delay = bd718xx_buck1234_set_ramp_delay,
+ .set_ramp_delay = regulator_set_ramp_delay_regmap,
};
/*
@@ -387,7 +357,7 @@ static const struct regulator_ops bd71837_buck34_ops_hwctrl = {
BD718XX_OPS(bd718xx_dvs_buck_regulator_ops, regulator_list_voltage_linear_range,
NULL, regulator_set_voltage_sel_regmap,
regulator_get_voltage_sel_regmap, regulator_set_voltage_time_sel,
- bd718xx_buck1234_set_ramp_delay);
+ /* bd718xx_buck1234_set_ramp_delay */ regulator_set_ramp_delay_regmap);
/*
* BD71837 BUCK1/2/3/4
@@ -645,6 +615,10 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK1_STARTUP_TIME,
.owner = THIS_MODULE,
+ .ramp_delay_table = bd718xx_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
+ .ramp_reg = BD718XX_REG_BUCK1_CTRL,
+ .ramp_mask = BUCK_RAMPRATE_MASK,
.of_parse_cb = buck_set_hw_dvs_levels,
},
.dvs = {
@@ -678,6 +652,10 @@ static struct bd718xx_regulator_data bd71847_regulators[] = {
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71847_BUCK2_STARTUP_TIME,
+ .ramp_delay_table = bd718xx_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
+ .ramp_reg = BD718XX_REG_BUCK2_CTRL,
+ .ramp_mask = BUCK_RAMPRATE_MASK,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -985,6 +963,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD718XX_REG_BUCK1_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK1_STARTUP_TIME,
+ .ramp_delay_table = bd718xx_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
+ .ramp_reg = BD718XX_REG_BUCK1_CTRL,
+ .ramp_mask = BUCK_RAMPRATE_MASK,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -1019,6 +1001,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD718XX_REG_BUCK2_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK2_STARTUP_TIME,
+ .ramp_delay_table = bd718xx_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
+ .ramp_reg = BD718XX_REG_BUCK2_CTRL,
+ .ramp_mask = BUCK_RAMPRATE_MASK,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -1050,6 +1036,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD71837_REG_BUCK3_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK3_STARTUP_TIME,
+ .ramp_delay_table = bd718xx_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
+ .ramp_reg = BD71837_REG_BUCK3_CTRL,
+ .ramp_mask = BUCK_RAMPRATE_MASK,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
@@ -1079,6 +1069,10 @@ static struct bd718xx_regulator_data bd71837_regulators[] = {
.enable_reg = BD71837_REG_BUCK4_CTRL,
.enable_mask = BD718XX_BUCK_EN,
.enable_time = BD71837_BUCK4_STARTUP_TIME,
+ .ramp_delay_table = bd718xx_ramp_delay,
+ .n_ramp_values = ARRAY_SIZE(bd718xx_ramp_delay),
+ .ramp_reg = BD71837_REG_BUCK4_CTRL,
+ .ramp_mask = BUCK_RAMPRATE_MASK,
.owner = THIS_MODULE,
.of_parse_cb = buck_set_hw_dvs_levels,
},
diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c
index 5c558b153d55..6e0d9c08ec1c 100644
--- a/drivers/regulator/rohm-regulator.c
+++ b/drivers/regulator/rohm-regulator.c
@@ -22,13 +22,26 @@ static int set_dvs_level(const struct regulator_desc *desc,
return ret;
return 0;
}
-
+ /* If voltage is set to 0 => disable */
if (uv == 0) {
if (omask)
return regmap_update_bits(regmap, oreg, omask, 0);
}
+ /* Some setups don't allow setting own voltage but do allow enabling */
+ if (!mask) {
+ if (omask)
+ return regmap_update_bits(regmap, oreg, omask, omask);
+
+ return -EINVAL;
+ }
for (i = 0; i < desc->n_voltages; i++) {
- ret = regulator_desc_list_voltage_linear_range(desc, i);
+ /* NOTE to next hacker - Does not support pickable ranges */
+ if (desc->linear_range_selectors)
+ return -EINVAL;
+ if (desc->n_linear_ranges)
+ ret = regulator_desc_list_voltage_linear_range(desc, i);
+ else
+ ret = regulator_desc_list_voltage_linear(desc, i);
if (ret < 0)
continue;
if (ret == uv) {
@@ -82,6 +95,12 @@ int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
mask = dvs->lpsr_mask;
omask = dvs->lpsr_on_mask;
break;
+ case ROHM_DVS_LEVEL_SNVS:
+ prop = "rohm,dvs-snvs-voltage";
+ reg = dvs->snvs_reg;
+ mask = dvs->snvs_mask;
+ omask = dvs->snvs_on_mask;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index ce723dc54aa4..773386b4aeb7 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -501,11 +501,11 @@ config RTC_DRV_M41T80_WDT
watchdog timer in the ST M41T60 and M41T80 RTC chips series.
config RTC_DRV_BD70528
- tristate "ROHM BD70528 PMIC RTC"
- depends on MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG)
+ tristate "ROHM BD70528, BD71815 and BD71828 PMIC RTC"
+ depends on MFD_ROHM_BD71828 || MFD_ROHM_BD70528 && (BD70528_WATCHDOG || !BD70528_WATCHDOG)
help
If you say Y here you will get support for the RTC
- block on ROHM BD70528 and BD71828 Power Management IC.
+ block on ROHM BD70528, BD71815 and BD71828 Power Management IC.
This driver can also be built as a module. If so, the module
will be called rtc-bd70528.
@@ -1296,6 +1296,14 @@ config RTC_DRV_CROS_EC
This driver can also be built as a module. If so, the module
will be called rtc-cros-ec.
+config RTC_DRV_NTXEC
+ tristate "Netronix embedded controller RTC"
+ depends on MFD_NTXEC
+ help
+ Say yes here if you want to support the RTC functionality of the
+ embedded controller found in certain e-book readers designed by the
+ original design manufacturer Netronix.
+
comment "on-CPU RTC drivers"
config RTC_DRV_ASM9260
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4e930183c170..2dd0dd956b0e 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o
obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o
obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o
obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o
+obj-$(CONFIG_RTC_DRV_NTXEC) += rtc-ntxec.o
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o
obj-$(CONFIG_RTC_DRV_PALMAS) += rtc-palmas.o
diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c
index 17cb67f5bf6e..6454afca02a6 100644
--- a/drivers/rtc/rtc-bd70528.c
+++ b/drivers/rtc/rtc-bd70528.c
@@ -6,6 +6,7 @@
#include <linux/bcd.h>
#include <linux/mfd/rohm-bd70528.h>
+#include <linux/mfd/rohm-bd71815.h>
#include <linux/mfd/rohm-bd71828.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -14,6 +15,12 @@
#include <linux/rtc.h>
/*
+ * On BD71828 and BD71815 the ALM0 MASK is 14 bytes after the ALM0
+ * block start
+ */
+#define BD718XX_ALM_EN_OFFSET 14
+
+/*
* We read regs RTC_SEC => RTC_YEAR
* this struct is ordered according to chip registers.
* Keep it u8 only (or packed) to avoid padding issues.
@@ -52,8 +59,10 @@ struct bd70528_rtc_alm {
struct bd70528_rtc {
struct rohm_regmap_dev *parent;
+ struct regmap *regmap;
struct device *dev;
u8 reg_time_start;
+ u8 bd718xx_alm_block_start;
bool has_rtc_timers;
};
@@ -234,10 +243,9 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
int ret;
struct bd71828_rtc_alm alm;
struct bd70528_rtc *r = dev_get_drvdata(dev);
- struct rohm_regmap_dev *parent = r->parent;
- ret = regmap_bulk_read(parent->regmap, BD71828_REG_RTC_ALM_START,
- &alm, sizeof(alm));
+ ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm,
+ sizeof(alm));
if (ret) {
dev_err(dev, "Failed to read alarm regs\n");
return ret;
@@ -250,8 +258,8 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
else
alm.alm_mask |= BD70528_MASK_ALM_EN;
- ret = regmap_bulk_write(parent->regmap, BD71828_REG_RTC_ALM_START,
- &alm, sizeof(alm));
+ ret = regmap_bulk_write(r->regmap, r->bd718xx_alm_block_start, &alm,
+ sizeof(alm));
if (ret)
dev_err(dev, "Failed to set alarm time\n");
@@ -265,17 +273,16 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
struct bd70528_rtc_alm alm;
int ret;
struct bd70528_rtc *r = dev_get_drvdata(dev);
- struct rohm_regmap_dev *parent = r->parent;
- ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_WAKE_START,
- &wake, sizeof(wake));
+ ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_WAKE_START, &wake,
+ sizeof(wake));
if (ret) {
dev_err(dev, "Failed to read wake regs\n");
return ret;
}
- ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_ALM_START,
- &alm, sizeof(alm));
+ ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
+ sizeof(alm));
if (ret) {
dev_err(dev, "Failed to read alarm regs\n");
return ret;
@@ -292,15 +299,14 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
wake.ctrl &= ~BD70528_MASK_WAKE_EN;
}
- ret = regmap_bulk_write(parent->regmap,
- BD70528_REG_RTC_WAKE_START, &wake,
+ ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_WAKE_START, &wake,
sizeof(wake));
if (ret) {
dev_err(dev, "Failed to set wake time\n");
return ret;
}
- ret = regmap_bulk_write(parent->regmap, BD70528_REG_RTC_ALM_START,
- &alm, sizeof(alm));
+ ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
+ sizeof(alm));
if (ret)
dev_err(dev, "Failed to set alarm time\n");
@@ -312,10 +318,9 @@ static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a)
int ret;
struct bd71828_rtc_alm alm;
struct bd70528_rtc *r = dev_get_drvdata(dev);
- struct rohm_regmap_dev *parent = r->parent;
- ret = regmap_bulk_read(parent->regmap, BD71828_REG_RTC_ALM_START,
- &alm, sizeof(alm));
+ ret = regmap_bulk_read(r->regmap, r->bd718xx_alm_block_start, &alm,
+ sizeof(alm));
if (ret) {
dev_err(dev, "Failed to read alarm regs\n");
return ret;
@@ -336,10 +341,9 @@ static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a)
struct bd70528_rtc_alm alm;
int ret;
struct bd70528_rtc *r = dev_get_drvdata(dev);
- struct rohm_regmap_dev *parent = r->parent;
- ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_ALM_START,
- &alm, sizeof(alm));
+ ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
+ sizeof(alm));
if (ret) {
dev_err(dev, "Failed to read alarm regs\n");
return ret;
@@ -360,14 +364,12 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
int ret, tmpret, old_states;
struct bd70528_rtc_data rtc_data;
struct bd70528_rtc *r = dev_get_drvdata(dev);
- struct rohm_regmap_dev *parent = r->parent;
ret = bd70528_disable_rtc_based_timers(r, &old_states);
if (ret)
return ret;
- tmpret = regmap_bulk_read(parent->regmap,
- r->reg_time_start, &rtc_data,
+ tmpret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (tmpret) {
dev_err(dev, "Failed to read RTC time registers\n");
@@ -375,8 +377,7 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
}
tm2rtc(t, &rtc_data);
- tmpret = regmap_bulk_write(parent->regmap,
- r->reg_time_start, &rtc_data,
+ tmpret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (tmpret) {
dev_err(dev, "Failed to set RTC time\n");
@@ -410,13 +411,11 @@ static int bd70528_set_time(struct device *dev, struct rtc_time *t)
static int bd70528_get_time(struct device *dev, struct rtc_time *t)
{
struct bd70528_rtc *r = dev_get_drvdata(dev);
- struct rohm_regmap_dev *parent = r->parent;
struct bd70528_rtc_data rtc_data;
int ret;
/* read the RTC date and time registers all at once */
- ret = regmap_bulk_read(parent->regmap,
- r->reg_time_start, &rtc_data,
+ ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data,
sizeof(rtc_data));
if (ret) {
dev_err(dev, "Failed to read RTC time (err %d)\n", ret);
@@ -443,7 +442,7 @@ static int bd70528_alm_enable(struct device *dev, unsigned int enabled)
dev_err(dev, "Failed to change wake state\n");
goto out_unlock;
}
- ret = regmap_update_bits(r->parent->regmap, BD70528_REG_RTC_ALM_MASK,
+ ret = regmap_update_bits(r->regmap, BD70528_REG_RTC_ALM_MASK,
BD70528_MASK_ALM_EN, enableval);
if (ret)
dev_err(dev, "Failed to change alarm state\n");
@@ -462,8 +461,9 @@ static int bd71828_alm_enable(struct device *dev, unsigned int enabled)
if (!enabled)
enableval = 0;
- ret = regmap_update_bits(r->parent->regmap, BD71828_REG_RTC_ALM0_MASK,
- BD70528_MASK_ALM_EN, enableval);
+ ret = regmap_update_bits(r->regmap, r->bd718xx_alm_block_start +
+ BD718XX_ALM_EN_OFFSET, BD70528_MASK_ALM_EN,
+ enableval);
if (ret)
dev_err(dev, "Failed to change alarm state\n");
@@ -498,7 +498,6 @@ static int bd70528_probe(struct platform_device *pdev)
{
struct bd70528_rtc *bd_rtc;
const struct rtc_class_ops *rtc_ops;
- struct rohm_regmap_dev *parent;
const char *irq_name;
int ret;
struct rtc_device *rtc;
@@ -508,20 +507,25 @@ static int bd70528_probe(struct platform_device *pdev)
u8 hour_reg;
enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
- parent = dev_get_drvdata(pdev->dev.parent);
- if (!parent) {
- dev_err(&pdev->dev, "No MFD driver data\n");
- return -EINVAL;
- }
bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL);
if (!bd_rtc)
return -ENOMEM;
- bd_rtc->parent = parent;
+ bd_rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!bd_rtc->regmap) {
+ dev_err(&pdev->dev, "No regmap\n");
+ return -EINVAL;
+ }
+
bd_rtc->dev = &pdev->dev;
switch (chip) {
case ROHM_CHIP_TYPE_BD70528:
+ bd_rtc->parent = dev_get_drvdata(pdev->dev.parent);
+ if (!bd_rtc->parent) {
+ dev_err(&pdev->dev, "No MFD data\n");
+ return -EINVAL;
+ }
irq_name = "bd70528-rtc-alm";
bd_rtc->has_rtc_timers = true;
bd_rtc->reg_time_start = BD70528_REG_RTC_START;
@@ -529,9 +533,28 @@ static int bd70528_probe(struct platform_device *pdev)
enable_main_irq = true;
rtc_ops = &bd70528_rtc_ops;
break;
+ case ROHM_CHIP_TYPE_BD71815:
+ irq_name = "bd71815-rtc-alm-0";
+ bd_rtc->reg_time_start = BD71815_REG_RTC_START;
+
+ /*
+ * See also BD718XX_ALM_EN_OFFSET:
+ * This works for BD71828 and BD71815 as they have same offset
+ * between ALM0 start and ALM0_MASK. If new ICs are to be
+ * added this requires proper check as ALM0_MASK is not located
+ * at the end of ALM0 block - but after all ALM blocks so if
+ * amount of ALMs differ the offset to enable/disable is likely
+ * to be incorrect and enable/disable must be given as own
+ * reg address here.
+ */
+ bd_rtc->bd718xx_alm_block_start = BD71815_REG_RTC_ALM_START;
+ hour_reg = BD71815_REG_HOUR;
+ rtc_ops = &bd71828_rtc_ops;
+ break;
case ROHM_CHIP_TYPE_BD71828:
irq_name = "bd71828-rtc-alm-0";
bd_rtc->reg_time_start = BD71828_REG_RTC_START;
+ bd_rtc->bd718xx_alm_block_start = BD71828_REG_RTC_ALM_START;
hour_reg = BD71828_REG_RTC_HOUR;
rtc_ops = &bd71828_rtc_ops;
break;
@@ -547,7 +570,7 @@ static int bd70528_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, bd_rtc);
- ret = regmap_read(parent->regmap, hour_reg, &hr);
+ ret = regmap_read(bd_rtc->regmap, hour_reg, &hr);
if (ret) {
dev_err(&pdev->dev, "Failed to reag RTC clock\n");
@@ -595,7 +618,7 @@ static int bd70528_probe(struct platform_device *pdev)
* from sub-registers when IRQ is disabled or freed.
*/
if (enable_main_irq) {
- ret = regmap_update_bits(parent->regmap,
+ ret = regmap_update_bits(bd_rtc->regmap,
BD70528_REG_INT_MAIN_MASK,
BD70528_INT_RTC_MASK, 0);
if (ret) {
@@ -610,6 +633,7 @@ static int bd70528_probe(struct platform_device *pdev)
static const struct platform_device_id bd718x7_rtc_id[] = {
{ "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 },
{ "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 },
+ { "bd71815-rtc", ROHM_CHIP_TYPE_BD71815 },
{ },
};
MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id);
diff --git a/drivers/rtc/rtc-ntxec.c b/drivers/rtc/rtc-ntxec.c
new file mode 100644
index 000000000000..850ca49186fd
--- /dev/null
+++ b/drivers/rtc/rtc-ntxec.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements access to the RTC time and date.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+struct ntxec_rtc {
+ struct device *dev;
+ struct ntxec *ec;
+};
+
+#define NTXEC_REG_WRITE_YEAR 0x10
+#define NTXEC_REG_WRITE_MONTH 0x11
+#define NTXEC_REG_WRITE_DAY 0x12
+#define NTXEC_REG_WRITE_HOUR 0x13
+#define NTXEC_REG_WRITE_MINUTE 0x14
+#define NTXEC_REG_WRITE_SECOND 0x15
+
+#define NTXEC_REG_READ_YEAR_MONTH 0x20
+#define NTXEC_REG_READ_MDAY_HOUR 0x21
+#define NTXEC_REG_READ_MINUTE_SECOND 0x23
+
+static int ntxec_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int value;
+ int res;
+
+retry:
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+ if (res < 0)
+ return res;
+
+ tm->tm_min = value >> 8;
+ tm->tm_sec = value & 0xff;
+
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MDAY_HOUR, &value);
+ if (res < 0)
+ return res;
+
+ tm->tm_mday = value >> 8;
+ tm->tm_hour = value & 0xff;
+
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_YEAR_MONTH, &value);
+ if (res < 0)
+ return res;
+
+ tm->tm_year = (value >> 8) + 100;
+ tm->tm_mon = (value & 0xff) - 1;
+
+ /*
+ * Read the minutes/seconds field again. If it changed since the first
+ * read, we can't assume that the values read so far are consistent,
+ * and should start from the beginning.
+ */
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+ if (res < 0)
+ return res;
+
+ if (tm->tm_min != value >> 8 || tm->tm_sec != (value & 0xff))
+ goto retry;
+
+ return 0;
+}
+
+static int ntxec_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+
+ /*
+ * To avoid time overflows while we're writing the full date/time,
+ * set the seconds field to zero before doing anything else. For the
+ * next 59 seconds (plus however long it takes until the RTC's next
+ * update of the second field), the seconds field will not overflow
+ * into the other fields.
+ */
+ struct reg_sequence regs[] = {
+ { NTXEC_REG_WRITE_SECOND, ntxec_reg8(0) },
+ { NTXEC_REG_WRITE_YEAR, ntxec_reg8(tm->tm_year - 100) },
+ { NTXEC_REG_WRITE_MONTH, ntxec_reg8(tm->tm_mon + 1) },
+ { NTXEC_REG_WRITE_DAY, ntxec_reg8(tm->tm_mday) },
+ { NTXEC_REG_WRITE_HOUR, ntxec_reg8(tm->tm_hour) },
+ { NTXEC_REG_WRITE_MINUTE, ntxec_reg8(tm->tm_min) },
+ { NTXEC_REG_WRITE_SECOND, ntxec_reg8(tm->tm_sec) },
+ };
+
+ return regmap_multi_reg_write(rtc->ec->regmap, regs, ARRAY_SIZE(regs));
+}
+
+static const struct rtc_class_ops ntxec_rtc_ops = {
+ .read_time = ntxec_read_time,
+ .set_time = ntxec_set_time,
+};
+
+static int ntxec_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *dev;
+ struct ntxec_rtc *rtc;
+
+ pdev->dev.of_node = pdev->dev.parent->of_node;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ rtc->dev = &pdev->dev;
+ rtc->ec = dev_get_drvdata(pdev->dev.parent);
+ platform_set_drvdata(pdev, rtc);
+
+ dev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ dev->ops = &ntxec_rtc_ops;
+ dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ dev->range_max = 9025257599LL; /* 2255-12-31 23:59:59 */
+
+ return devm_rtc_register_device(dev);
+}
+
+static struct platform_driver ntxec_rtc_driver = {
+ .driver = {
+ .name = "ntxec-rtc",
+ },
+ .probe = ntxec_rtc_probe,
+};
+module_platform_driver(ntxec_rtc_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("RTC driver for Netronix EC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntxec-rtc");
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 1fe0042a48d2..355100dad60a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -172,6 +172,19 @@ config BD70528_WATCHDOG
Alternatively say M to compile the driver as a module,
which will be called bd70528_wdt.
+config BD957XMUF_WATCHDOG
+ tristate "ROHM BD9576MUF and BD9573MUF PMIC Watchdog"
+ depends on MFD_ROHM_BD957XMUF
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the ROHM BD9576 and BD9573 PMICs.
+ These PMIC ICs contain watchdog block which can be configured
+ to toggle reset line if SoC fails to ping watchdog via GPIO.
+
+ Say Y here to include support for the ROHM BD9576 or BD9573
+ watchdog. Alternatively say M to compile the driver as a module,
+ which will be called bd9576_wdt.
+
config DA9052_WATCHDOG
tristate "Dialog DA9052 Watchdog"
depends on PMIC_DA9052 || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f3a6540e725e..a7eade8b4d45 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -204,6 +204,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
+obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
diff --git a/drivers/watchdog/bd9576_wdt.c b/drivers/watchdog/bd9576_wdt.c
new file mode 100644
index 000000000000..0b6999f3b6e8
--- /dev/null
+++ b/drivers/watchdog/bd9576_wdt.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 ROHM Semiconductors
+ *
+ * ROHM BD9576MUF and BD9573MUF Watchdog driver
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+static bool nowayout;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default=\"false\")");
+
+#define HW_MARGIN_MIN 2
+#define HW_MARGIN_MAX 4416
+#define BD957X_WDT_DEFAULT_MARGIN 4416
+#define WATCHDOG_TIMEOUT 30
+
+struct bd9576_wdt_priv {
+ struct gpio_desc *gpiod_ping;
+ struct gpio_desc *gpiod_en;
+ struct device *dev;
+ struct regmap *regmap;
+ bool always_running;
+ struct watchdog_device wdd;
+};
+
+static void bd9576_wdt_disable(struct bd9576_wdt_priv *priv)
+{
+ gpiod_set_value_cansleep(priv->gpiod_en, 0);
+}
+
+static int bd9576_wdt_ping(struct watchdog_device *wdd)
+{
+ struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ /* Pulse */
+ gpiod_set_value_cansleep(priv->gpiod_ping, 1);
+ gpiod_set_value_cansleep(priv->gpiod_ping, 0);
+
+ return 0;
+}
+
+static int bd9576_wdt_start(struct watchdog_device *wdd)
+{
+ struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ gpiod_set_value_cansleep(priv->gpiod_en, 1);
+
+ return bd9576_wdt_ping(wdd);
+}
+
+static int bd9576_wdt_stop(struct watchdog_device *wdd)
+{
+ struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ if (!priv->always_running)
+ bd9576_wdt_disable(priv);
+ else
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+ return 0;
+}
+
+static const struct watchdog_info bd957x_wdt_ident = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
+ WDIOF_SETTIMEOUT,
+ .identity = "BD957x Watchdog",
+};
+
+static const struct watchdog_ops bd957x_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = bd9576_wdt_start,
+ .stop = bd9576_wdt_stop,
+ .ping = bd9576_wdt_ping,
+};
+
+/* Unit is hundreds of uS */
+#define FASTNG_MIN 23
+
+static int find_closest_fast(int target, int *sel, int *val)
+{
+ int i;
+ int window = FASTNG_MIN;
+
+ for (i = 0; i < 8 && window < target; i++)
+ window <<= 1;
+
+ *val = window;
+ *sel = i;
+
+ if (i == 8)
+ return -EINVAL;
+
+ return 0;
+
+}
+
+static int find_closest_slow_by_fast(int fast_val, int target, int *slowsel)
+{
+ int sel;
+ static const int multipliers[] = {2, 3, 7, 15};
+
+ for (sel = 0; sel < ARRAY_SIZE(multipliers) &&
+ multipliers[sel] * fast_val < target; sel++)
+ ;
+
+ if (sel == ARRAY_SIZE(multipliers))
+ return -EINVAL;
+
+ *slowsel = sel;
+
+ return 0;
+}
+
+static int find_closest_slow(int target, int *slow_sel, int *fast_sel)
+{
+ static const int multipliers[] = {2, 3, 7, 15};
+ int i, j;
+ int val = 0;
+ int window = FASTNG_MIN;
+
+ for (i = 0; i < 8; i++) {
+ for (j = 0; j < ARRAY_SIZE(multipliers); j++) {
+ int slow;
+
+ slow = window * multipliers[j];
+ if (slow >= target && (!val || slow < val)) {
+ val = slow;
+ *fast_sel = i;
+ *slow_sel = j;
+ }
+ }
+ window <<= 1;
+ }
+ if (!val)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define BD957X_WDG_TYPE_WINDOW BIT(5)
+#define BD957X_WDG_TYPE_SLOW 0
+#define BD957X_WDG_TYPE_MASK BIT(5)
+#define BD957X_WDG_NG_RATIO_MASK 0x18
+#define BD957X_WDG_FASTNG_MASK 0x7
+
+static int bd957x_set_wdt_mode(struct bd9576_wdt_priv *priv, int hw_margin,
+ int hw_margin_min)
+{
+ int ret, fastng, slowng, type, reg, mask;
+ struct device *dev = priv->dev;
+
+ /* convert to 100uS */
+ hw_margin *= 10;
+ hw_margin_min *= 10;
+ if (hw_margin_min) {
+ int min;
+
+ type = BD957X_WDG_TYPE_WINDOW;
+ dev_dbg(dev, "Setting type WINDOW 0x%x\n", type);
+ ret = find_closest_fast(hw_margin_min, &fastng, &min);
+ if (ret) {
+ dev_err(dev, "bad WDT window for fast timeout\n");
+ return ret;
+ }
+
+ ret = find_closest_slow_by_fast(min, hw_margin, &slowng);
+ if (ret) {
+ dev_err(dev, "bad WDT window\n");
+ return ret;
+ }
+
+ } else {
+ type = BD957X_WDG_TYPE_SLOW;
+ dev_dbg(dev, "Setting type SLOW 0x%x\n", type);
+ ret = find_closest_slow(hw_margin, &slowng, &fastng);
+ if (ret) {
+ dev_err(dev, "bad WDT window\n");
+ return ret;
+ }
+ }
+
+ slowng <<= ffs(BD957X_WDG_NG_RATIO_MASK) - 1;
+ reg = type | slowng | fastng;
+ mask = BD957X_WDG_TYPE_MASK | BD957X_WDG_NG_RATIO_MASK |
+ BD957X_WDG_FASTNG_MASK;
+ ret = regmap_update_bits(priv->regmap, BD957X_REG_WDT_CONF,
+ mask, reg);
+
+ return ret;
+}
+
+static int bd9576_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->parent->of_node;
+ struct bd9576_wdt_priv *priv;
+ u32 hw_margin[2];
+ u32 hw_margin_max = BD957X_WDT_DEFAULT_MARGIN, hw_margin_min = 0;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->dev = dev;
+ priv->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!priv->regmap) {
+ dev_err(dev, "No regmap found\n");
+ return -ENODEV;
+ }
+
+ priv->gpiod_en = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
+ "rohm,watchdog-enable-gpios",
+ 0, GPIOD_OUT_LOW,
+ "watchdog-enable");
+ if (IS_ERR(priv->gpiod_en))
+ return dev_err_probe(dev, PTR_ERR(priv->gpiod_en),
+ "getting watchdog-enable GPIO failed\n");
+
+ priv->gpiod_ping = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
+ "rohm,watchdog-ping-gpios",
+ 0, GPIOD_OUT_LOW,
+ "watchdog-ping");
+ if (IS_ERR(priv->gpiod_ping))
+ return dev_err_probe(dev, PTR_ERR(priv->gpiod_ping),
+ "getting watchdog-ping GPIO failed\n");
+
+ ret = of_property_read_variable_u32_array(np, "rohm,hw-timeout-ms",
+ &hw_margin[0], 1, 2);
+ if (ret < 0 && ret != -EINVAL)
+ return ret;
+
+ if (ret == 1)
+ hw_margin_max = hw_margin[0];
+
+ if (ret == 2) {
+ hw_margin_max = hw_margin[1];
+ hw_margin_min = hw_margin[0];
+ }
+
+ ret = bd957x_set_wdt_mode(priv, hw_margin_max, hw_margin_min);
+ if (ret)
+ return ret;
+
+ priv->always_running = of_property_read_bool(np, "always-running");
+
+ watchdog_set_drvdata(&priv->wdd, priv);
+
+ priv->wdd.info = &bd957x_wdt_ident;
+ priv->wdd.ops = &bd957x_wdt_ops;
+ priv->wdd.min_hw_heartbeat_ms = hw_margin_min;
+ priv->wdd.max_hw_heartbeat_ms = hw_margin_max;
+ priv->wdd.parent = dev;
+ priv->wdd.timeout = WATCHDOG_TIMEOUT;
+
+ watchdog_init_timeout(&priv->wdd, 0, dev);
+ watchdog_set_nowayout(&priv->wdd, nowayout);
+
+ watchdog_stop_on_reboot(&priv->wdd);
+
+ if (priv->always_running)
+ bd9576_wdt_start(&priv->wdd);
+
+ return devm_watchdog_register_device(dev, &priv->wdd);
+}
+
+static struct platform_driver bd9576_wdt_driver = {
+ .driver = {
+ .name = "bd9576-wdt",
+ },
+ .probe = bd9576_wdt_probe,
+};
+
+module_platform_driver(bd9576_wdt_driver);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576/BD9573 Watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd9576-wdt");
diff --git a/include/linux/mfd/ab3100.h b/include/linux/mfd/ab3100.h
deleted file mode 100644
index a881d8495186..000000000000
--- a/include/linux/mfd/ab3100.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * AB3100 core access functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/regulator/machine.h>
-
-struct device;
-
-#ifndef MFD_AB3100_H
-#define MFD_AB3100_H
-
-
-#define AB3100_P1A 0xc0
-#define AB3100_P1B 0xc1
-#define AB3100_P1C 0xc2
-#define AB3100_P1D 0xc3
-#define AB3100_P1E 0xc4
-#define AB3100_P1F 0xc5
-#define AB3100_P1G 0xc6
-#define AB3100_R2A 0xc7
-#define AB3100_R2B 0xc8
-
-/*
- * AB3100, EVENTA1, A2 and A3 event register flags
- * these are catenated into a single 32-bit flag in the code
- * for event notification broadcasts.
- */
-#define AB3100_EVENTA1_ONSWA (0x01<<16)
-#define AB3100_EVENTA1_ONSWB (0x02<<16)
-#define AB3100_EVENTA1_ONSWC (0x04<<16)
-#define AB3100_EVENTA1_DCIO (0x08<<16)
-#define AB3100_EVENTA1_OVER_TEMP (0x10<<16)
-#define AB3100_EVENTA1_SIM_OFF (0x20<<16)
-#define AB3100_EVENTA1_VBUS (0x40<<16)
-#define AB3100_EVENTA1_VSET_USB (0x80<<16)
-
-#define AB3100_EVENTA2_READY_TX (0x01<<8)
-#define AB3100_EVENTA2_READY_RX (0x02<<8)
-#define AB3100_EVENTA2_OVERRUN_ERROR (0x04<<8)
-#define AB3100_EVENTA2_FRAMING_ERROR (0x08<<8)
-#define AB3100_EVENTA2_CHARG_OVERCURRENT (0x10<<8)
-#define AB3100_EVENTA2_MIDR (0x20<<8)
-#define AB3100_EVENTA2_BATTERY_REM (0x40<<8)
-#define AB3100_EVENTA2_ALARM (0x80<<8)
-
-#define AB3100_EVENTA3_ADC_TRIG5 (0x01)
-#define AB3100_EVENTA3_ADC_TRIG4 (0x02)
-#define AB3100_EVENTA3_ADC_TRIG3 (0x04)
-#define AB3100_EVENTA3_ADC_TRIG2 (0x08)
-#define AB3100_EVENTA3_ADC_TRIGVBAT (0x10)
-#define AB3100_EVENTA3_ADC_TRIGVTX (0x20)
-#define AB3100_EVENTA3_ADC_TRIG1 (0x40)
-#define AB3100_EVENTA3_ADC_TRIG0 (0x80)
-
-/* AB3100, STR register flags */
-#define AB3100_STR_ONSWA (0x01)
-#define AB3100_STR_ONSWB (0x02)
-#define AB3100_STR_ONSWC (0x04)
-#define AB3100_STR_DCIO (0x08)
-#define AB3100_STR_BOOT_MODE (0x10)
-#define AB3100_STR_SIM_OFF (0x20)
-#define AB3100_STR_BATT_REMOVAL (0x40)
-#define AB3100_STR_VBUS (0x80)
-
-/*
- * AB3100 contains 8 regulators, one external regulator controller
- * and a buck converter, further the LDO E and buck converter can
- * have separate settings if they are in sleep mode, this is
- * modeled as a separate regulator.
- */
-#define AB3100_NUM_REGULATORS 10
-
-/**
- * struct ab3100
- * @access_mutex: lock out concurrent accesses to the AB3100 registers
- * @dev: pointer to the containing device
- * @i2c_client: I2C client for this chip
- * @testreg_client: secondary client for test registers
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @event_subscribers: event subscribers are listed here
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- *
- * This struct is PRIVATE and devices using it should NOT
- * access ANY fields. It is used as a token for calling the
- * AB3100 functions.
- */
-struct ab3100 {
- struct mutex access_mutex;
- struct device *dev;
- struct i2c_client *i2c_client;
- struct i2c_client *testreg_client;
- char chip_name[32];
- u8 chip_id;
- struct blocking_notifier_head event_subscribers;
- u8 startup_events[3];
- bool startup_events_read;
-};
-
-/**
- * struct ab3100_platform_data
- * Data supplied to initialize board connections to the AB3100
- * @reg_constraints: regulator constraints for target board
- * the order of these constraints are: LDO A, C, D, E,
- * F, G, H, K, EXT and BUCK.
- * @reg_initvals: initial values for the regulator registers
- * plus two sleep settings for LDO E and the BUCK converter.
- * exactly AB3100_NUM_REGULATORS+2 values must be sent in.
- * Order: LDO A, C, E, E sleep, F, G, H, K, EXT, BUCK,
- * BUCK sleep, LDO D. (LDO D need to be initialized last.)
- * @external_voltage: voltage level of the external regulator.
- */
-struct ab3100_platform_data {
- struct regulator_init_data reg_constraints[AB3100_NUM_REGULATORS];
- u8 reg_initvals[AB3100_NUM_REGULATORS+2];
- int external_voltage;
-};
-
-int ab3100_event_register(struct ab3100 *ab3100,
- struct notifier_block *nb);
-int ab3100_event_unregister(struct ab3100 *ab3100,
- struct notifier_block *nb);
-
-#endif /* MFD_AB3100_H */
diff --git a/include/linux/mfd/atc260x/atc2603c.h b/include/linux/mfd/atc260x/atc2603c.h
new file mode 100644
index 000000000000..07ac640ef3e1
--- /dev/null
+++ b/include/linux/mfd/atc260x/atc2603c.h
@@ -0,0 +1,281 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ATC2603C PMIC register definitions
+ *
+ * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#ifndef __LINUX_MFD_ATC260X_ATC2603C_H
+#define __LINUX_MFD_ATC260X_ATC2603C_H
+
+enum atc2603c_irq_def {
+ ATC2603C_IRQ_AUDIO = 0,
+ ATC2603C_IRQ_OV,
+ ATC2603C_IRQ_OC,
+ ATC2603C_IRQ_OT,
+ ATC2603C_IRQ_UV,
+ ATC2603C_IRQ_ALARM,
+ ATC2603C_IRQ_ONOFF,
+ ATC2603C_IRQ_SGPIO,
+ ATC2603C_IRQ_IR,
+ ATC2603C_IRQ_REMCON,
+ ATC2603C_IRQ_POWER_IN,
+};
+
+/* PMU Registers */
+#define ATC2603C_PMU_SYS_CTL0 0x00
+#define ATC2603C_PMU_SYS_CTL1 0x01
+#define ATC2603C_PMU_SYS_CTL2 0x02
+#define ATC2603C_PMU_SYS_CTL3 0x03
+#define ATC2603C_PMU_SYS_CTL4 0x04
+#define ATC2603C_PMU_SYS_CTL5 0x05
+#define ATC2603C_PMU_SYS_CTL6 0x06
+#define ATC2603C_PMU_SYS_CTL7 0x07
+#define ATC2603C_PMU_SYS_CTL8 0x08
+#define ATC2603C_PMU_SYS_CTL9 0x09
+#define ATC2603C_PMU_BAT_CTL0 0x0A
+#define ATC2603C_PMU_BAT_CTL1 0x0B
+#define ATC2603C_PMU_VBUS_CTL0 0x0C
+#define ATC2603C_PMU_VBUS_CTL1 0x0D
+#define ATC2603C_PMU_WALL_CTL0 0x0E
+#define ATC2603C_PMU_WALL_CTL1 0x0F
+#define ATC2603C_PMU_SYS_PENDING 0x10
+#define ATC2603C_PMU_DC1_CTL0 0x11
+#define ATC2603C_PMU_DC1_CTL1 0x12 // Undocumented
+#define ATC2603C_PMU_DC1_CTL2 0x13 // Undocumented
+#define ATC2603C_PMU_DC2_CTL0 0x14
+#define ATC2603C_PMU_DC2_CTL1 0x15 // Undocumented
+#define ATC2603C_PMU_DC2_CTL2 0x16 // Undocumented
+#define ATC2603C_PMU_DC3_CTL0 0x17
+#define ATC2603C_PMU_DC3_CTL1 0x18 // Undocumented
+#define ATC2603C_PMU_DC3_CTL2 0x19 // Undocumented
+#define ATC2603C_PMU_DC4_CTL0 0x1A // Undocumented
+#define ATC2603C_PMU_DC4_CTL1 0x1B // Undocumented
+#define ATC2603C_PMU_DC5_CTL0 0x1C // Undocumented
+#define ATC2603C_PMU_DC5_CTL1 0x1D // Undocumented
+#define ATC2603C_PMU_LDO1_CTL 0x1E
+#define ATC2603C_PMU_LDO2_CTL 0x1F
+#define ATC2603C_PMU_LDO3_CTL 0x20
+#define ATC2603C_PMU_LDO4_CTL 0x21 // Undocumented
+#define ATC2603C_PMU_LDO5_CTL 0x22
+#define ATC2603C_PMU_LDO6_CTL 0x23
+#define ATC2603C_PMU_LDO7_CTL 0x24
+#define ATC2603C_PMU_LDO8_CTL 0x25 // Undocumented
+#define ATC2603C_PMU_LDO9_CTL 0x26 // Undocumented
+#define ATC2603C_PMU_LDO10_CTL 0x27 // Undocumented
+#define ATC2603C_PMU_LDO11_CTL 0x28
+#define ATC2603C_PMU_SWITCH_CTL 0x29
+#define ATC2603C_PMU_OV_CTL0 0x2A
+#define ATC2603C_PMU_OV_CTL1 0x2B
+#define ATC2603C_PMU_OV_STATUS 0x2C
+#define ATC2603C_PMU_OV_EN 0x2D
+#define ATC2603C_PMU_OV_INT_EN 0x2E
+#define ATC2603C_PMU_OC_CTL 0x2F
+#define ATC2603C_PMU_OC_STATUS 0x30
+#define ATC2603C_PMU_OC_EN 0x31
+#define ATC2603C_PMU_OC_INT_EN 0x32
+#define ATC2603C_PMU_UV_CTL0 0x33
+#define ATC2603C_PMU_UV_CTL1 0x34
+#define ATC2603C_PMU_UV_STATUS 0x35
+#define ATC2603C_PMU_UV_EN 0x36
+#define ATC2603C_PMU_UV_INT_EN 0x37
+#define ATC2603C_PMU_OT_CTL 0x38
+#define ATC2603C_PMU_CHARGER_CTL0 0x39
+#define ATC2603C_PMU_CHARGER_CTL1 0x3A
+#define ATC2603C_PMU_CHARGER_CTL2 0x3B
+#define ATC2603C_PMU_BAKCHARGER_CTL 0x3C // Undocumented
+#define ATC2603C_PMU_APDS_CTL 0x3D
+#define ATC2603C_PMU_AUXADC_CTL0 0x3E
+#define ATC2603C_PMU_AUXADC_CTL1 0x3F
+#define ATC2603C_PMU_BATVADC 0x40
+#define ATC2603C_PMU_BATIADC 0x41
+#define ATC2603C_PMU_WALLVADC 0x42
+#define ATC2603C_PMU_WALLIADC 0x43
+#define ATC2603C_PMU_VBUSVADC 0x44
+#define ATC2603C_PMU_VBUSIADC 0x45
+#define ATC2603C_PMU_SYSPWRADC 0x46
+#define ATC2603C_PMU_REMCONADC 0x47
+#define ATC2603C_PMU_SVCCADC 0x48
+#define ATC2603C_PMU_CHGIADC 0x49
+#define ATC2603C_PMU_IREFADC 0x4A
+#define ATC2603C_PMU_BAKBATADC 0x4B
+#define ATC2603C_PMU_ICTEMPADC 0x4C
+#define ATC2603C_PMU_AUXADC0 0x4D
+#define ATC2603C_PMU_AUXADC1 0x4E
+#define ATC2603C_PMU_AUXADC2 0x4F
+#define ATC2603C_PMU_ICMADC 0x50
+#define ATC2603C_PMU_BDG_CTL 0x51 // Undocumented
+#define ATC2603C_RTC_CTL 0x52
+#define ATC2603C_RTC_MSALM 0x53
+#define ATC2603C_RTC_HALM 0x54
+#define ATC2603C_RTC_YMDALM 0x55
+#define ATC2603C_RTC_MS 0x56
+#define ATC2603C_RTC_H 0x57
+#define ATC2603C_RTC_DC 0x58
+#define ATC2603C_RTC_YMD 0x59
+#define ATC2603C_EFUSE_DAT 0x5A // Undocumented
+#define ATC2603C_EFUSECRTL1 0x5B // Undocumented
+#define ATC2603C_EFUSECRTL2 0x5C // Undocumented
+#define ATC2603C_PMU_FW_USE0 0x5D // Undocumented
+#define ATC2603C_PMU_FW_USE1 0x5E // Undocumented
+#define ATC2603C_PMU_FW_USE2 0x5F // Undocumented
+#define ATC2603C_PMU_FW_USE3 0x60 // Undocumented
+#define ATC2603C_PMU_FW_USE4 0x61 // Undocumented
+#define ATC2603C_PMU_ABNORMAL_STATUS 0x62
+#define ATC2603C_PMU_WALL_APDS_CTL 0x63
+#define ATC2603C_PMU_REMCON_CTL0 0x64
+#define ATC2603C_PMU_REMCON_CTL1 0x65
+#define ATC2603C_PMU_MUX_CTL0 0x66
+#define ATC2603C_PMU_SGPIO_CTL0 0x67
+#define ATC2603C_PMU_SGPIO_CTL1 0x68
+#define ATC2603C_PMU_SGPIO_CTL2 0x69
+#define ATC2603C_PMU_SGPIO_CTL3 0x6A
+#define ATC2603C_PMU_SGPIO_CTL4 0x6B
+#define ATC2603C_PWMCLK_CTL 0x6C
+#define ATC2603C_PWM0_CTL 0x6D
+#define ATC2603C_PWM1_CTL 0x6E
+#define ATC2603C_PMU_ADC_DBG0 0x70
+#define ATC2603C_PMU_ADC_DBG1 0x71
+#define ATC2603C_PMU_ADC_DBG2 0x72
+#define ATC2603C_PMU_ADC_DBG3 0x73
+#define ATC2603C_PMU_ADC_DBG4 0x74
+#define ATC2603C_IRC_CTL 0x80
+#define ATC2603C_IRC_STAT 0x81
+#define ATC2603C_IRC_CC 0x82
+#define ATC2603C_IRC_KDC 0x83
+#define ATC2603C_IRC_WK 0x84
+#define ATC2603C_IRC_RCC 0x85
+#define ATC2603C_IRC_FILTER 0x86
+
+/* AUDIO_OUT Registers */
+#define ATC2603C_AUDIOINOUT_CTL 0xA0
+#define ATC2603C_AUDIO_DEBUGOUTCTL 0xA1
+#define ATC2603C_DAC_DIGITALCTL 0xA2
+#define ATC2603C_DAC_VOLUMECTL0 0xA3
+#define ATC2603C_DAC_ANALOG0 0xA4
+#define ATC2603C_DAC_ANALOG1 0xA5
+#define ATC2603C_DAC_ANALOG2 0xA6
+#define ATC2603C_DAC_ANALOG3 0xA7
+
+/* AUDIO_IN Registers */
+#define ATC2603C_ADC_DIGITALCTL 0xA8
+#define ATC2603C_ADC_HPFCTL 0xA9
+#define ATC2603C_ADC_CTL 0xAA
+#define ATC2603C_AGC_CTL0 0xAB
+#define ATC2603C_AGC_CTL1 0xAC // Undocumented
+#define ATC2603C_AGC_CTL2 0xAD
+#define ATC2603C_ADC_ANALOG0 0xAE
+#define ATC2603C_ADC_ANALOG1 0xAF
+
+/* PCM_IF Registers */
+#define ATC2603C_PCM0_CTL 0xB0 // Undocumented
+#define ATC2603C_PCM1_CTL 0xB1 // Undocumented
+#define ATC2603C_PCM2_CTL 0xB2 // Undocumented
+#define ATC2603C_PCMIF_CTL 0xB3 // Undocumented
+
+/* CMU_CONTROL Registers */
+#define ATC2603C_CMU_DEVRST 0xC1 // Undocumented
+
+/* INTS Registers */
+#define ATC2603C_INTS_PD 0xC8
+#define ATC2603C_INTS_MSK 0xC9
+
+/* MFP Registers */
+#define ATC2603C_MFP_CTL 0xD0
+#define ATC2603C_PAD_VSEL 0xD1 // Undocumented
+#define ATC2603C_GPIO_OUTEN 0xD2
+#define ATC2603C_GPIO_INEN 0xD3
+#define ATC2603C_GPIO_DAT 0xD4
+#define ATC2603C_PAD_DRV 0xD5
+#define ATC2603C_PAD_EN 0xD6
+#define ATC2603C_DEBUG_SEL 0xD7 // Undocumented
+#define ATC2603C_DEBUG_IE 0xD8 // Undocumented
+#define ATC2603C_DEBUG_OE 0xD9 // Undocumented
+#define ATC2603C_BIST_START 0x0A // Undocumented
+#define ATC2603C_BIST_RESULT 0x0B // Undocumented
+#define ATC2603C_CHIP_VER 0xDC
+
+/* TWSI Registers */
+#define ATC2603C_SADDR 0xFF
+
+/* PMU_SYS_CTL0 Register Mask Bits */
+#define ATC2603C_PMU_SYS_CTL0_IR_WK_EN BIT(5)
+#define ATC2603C_PMU_SYS_CTL0_RESET_WK_EN BIT(6)
+#define ATC2603C_PMU_SYS_CTL0_HDSW_WK_EN BIT(7)
+#define ATC2603C_PMU_SYS_CTL0_ALARM_WK_EN BIT(8)
+#define ATC2603C_PMU_SYS_CTL0_REM_CON_WK_EN BIT(9)
+#define ATC2603C_PMU_SYS_CTL0_RESTART_EN BIT(10)
+#define ATC2603C_PMU_SYS_CTL0_SGPIOIRQ_WK_EN BIT(11)
+#define ATC2603C_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN BIT(12)
+#define ATC2603C_PMU_SYS_CTL0_ONOFF_LONG_WK_EN BIT(13)
+#define ATC2603C_PMU_SYS_CTL0_WALL_WK_EN BIT(14)
+#define ATC2603C_PMU_SYS_CTL0_USB_WK_EN BIT(15)
+#define ATC2603C_PMU_SYS_CTL0_WK_ALL (GENMASK(15, 5) & (~BIT(10)))
+
+/* PMU_SYS_CTL1 Register Mask Bits */
+#define ATC2603C_PMU_SYS_CTL1_EN_S1 BIT(0)
+#define ATC2603C_PMU_SYS_CTL1_LB_S4_EN BIT(2)
+#define ATC2603C_PMU_SYS_CTL1_LB_S4 GENMASK(4, 3)
+#define ATC2603C_PMU_SYS_CTL1_LB_S4_3_1V BIT(4)
+#define ATC2603C_PMU_SYS_CTL1_IR_WK_FLAG BIT(5)
+#define ATC2603C_PMU_SYS_CTL1_RESET_WK_FLAG BIT(6)
+#define ATC2603C_PMU_SYS_CTL1_HDSW_WK_FLAG BIT(7)
+#define ATC2603C_PMU_SYS_CTL1_ALARM_WK_FLAG BIT(8)
+#define ATC2603C_PMU_SYS_CTL1_REM_CON_WK_FLAG BIT(9)
+#define ATC2603C_PMU_SYS_CTL1_ONOFF_PRESS_RESET_IRQ_PD BIT(10)
+#define ATC2603C_PMU_SYS_CTL1_SGPIOIRQ_WK_FLAG BIT(11)
+#define ATC2603C_PMU_SYS_CTL1_ONOFF_SHORT_WK_FLAG BIT(12)
+#define ATC2603C_PMU_SYS_CTL1_ONOFF_LONG_WK_FLAG BIT(13)
+#define ATC2603C_PMU_SYS_CTL1_WALL_WK_FLAG BIT(14)
+#define ATC2603C_PMU_SYS_CTL1_USB_WK_FLAG BIT(15)
+
+/* PMU_SYS_CTL2 Register Mask Bits */
+#define ATC2603C_PMU_SYS_CTL2_PMU_A_EN BIT(0)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN BIT(1)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_PD BIT(2)
+#define ATC2603C_PMU_SYS_CTL2_S2TIMER GENMASK(5, 3)
+#define ATC2603C_PMU_SYS_CTL2_S2_TIMER_EN BIT(6)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL GENMASK(8, 7)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_RESET_EN BIT(9)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS_TIME GENMASK(11, 10)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_INT_EN BIT(12)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_LONG_PRESS BIT(13)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_SHORT_PRESS BIT(14)
+#define ATC2603C_PMU_SYS_CTL2_ONOFF_PRESS BIT(15)
+
+/* PMU_SYS_CTL3 Register Mask Bits */
+#define ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER GENMASK(8, 7)
+#define ATC2603C_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN BIT(9)
+#define ATC2603C_PMU_SYS_CTL3_S3_TIMER GENMASK(12, 10)
+#define ATC2603C_PMU_SYS_CTL3_S3_TIMER_EN BIT(13)
+#define ATC2603C_PMU_SYS_CTL3_EN_S3 BIT(14)
+#define ATC2603C_PMU_SYS_CTL3_EN_S2 BIT(15)
+
+/* PMU_SYS_CTL5 Register Mask Bits */
+#define ATC2603C_PMU_SYS_CTL5_WALLWKDTEN BIT(7)
+#define ATC2603C_PMU_SYS_CTL5_VBUSWKDTEN BIT(8)
+#define ATC2603C_PMU_SYS_CTL5_REMCON_DECT_EN BIT(9)
+#define ATC2603C_PMU_SYS_CTL5_ONOFF_8S_SEL BIT(10)
+
+/* INTS_MSK Register Mask Bits */
+#define ATC2603C_INTS_MSK_AUDIO BIT(0)
+#define ATC2603C_INTS_MSK_OV BIT(1)
+#define ATC2603C_INTS_MSK_OC BIT(2)
+#define ATC2603C_INTS_MSK_OT BIT(3)
+#define ATC2603C_INTS_MSK_UV BIT(4)
+#define ATC2603C_INTS_MSK_ALARM BIT(5)
+#define ATC2603C_INTS_MSK_ONOFF BIT(6)
+#define ATC2603C_INTS_MSK_SGPIO BIT(7)
+#define ATC2603C_INTS_MSK_IR BIT(8)
+#define ATC2603C_INTS_MSK_REMCON BIT(9)
+#define ATC2603C_INTS_MSK_POWERIN BIT(10)
+
+/* CMU_DEVRST Register Mask Bits */
+#define ATC2603C_CMU_DEVRST_MFP BIT(1)
+#define ATC2603C_CMU_DEVRST_INTS BIT(2)
+#define ATC2603C_CMU_DEVRST_AUDIO BIT(4)
+
+/* PAD_EN Register Mask Bits */
+#define ATC2603C_PAD_EN_EXTIRQ BIT(0)
+
+#endif /* __LINUX_MFD_ATC260X_ATC2603C_H */
diff --git a/include/linux/mfd/atc260x/atc2609a.h b/include/linux/mfd/atc260x/atc2609a.h
new file mode 100644
index 000000000000..b957d7bd73e9
--- /dev/null
+++ b/include/linux/mfd/atc260x/atc2609a.h
@@ -0,0 +1,308 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * ATC2609A PMIC register definitions
+ *
+ * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ */
+
+#ifndef __LINUX_MFD_ATC260X_ATC2609A_H
+#define __LINUX_MFD_ATC260X_ATC2609A_H
+
+enum atc2609a_irq_def {
+ ATC2609A_IRQ_AUDIO = 0,
+ ATC2609A_IRQ_OV,
+ ATC2609A_IRQ_OC,
+ ATC2609A_IRQ_OT,
+ ATC2609A_IRQ_UV,
+ ATC2609A_IRQ_ALARM,
+ ATC2609A_IRQ_ONOFF,
+ ATC2609A_IRQ_WKUP,
+ ATC2609A_IRQ_IR,
+ ATC2609A_IRQ_REMCON,
+ ATC2609A_IRQ_POWER_IN,
+};
+
+/* PMU Registers */
+#define ATC2609A_PMU_SYS_CTL0 0x00
+#define ATC2609A_PMU_SYS_CTL1 0x01
+#define ATC2609A_PMU_SYS_CTL2 0x02
+#define ATC2609A_PMU_SYS_CTL3 0x03
+#define ATC2609A_PMU_SYS_CTL4 0x04
+#define ATC2609A_PMU_SYS_CTL5 0x05
+#define ATC2609A_PMU_SYS_CTL6 0x06
+#define ATC2609A_PMU_SYS_CTL7 0x07
+#define ATC2609A_PMU_SYS_CTL8 0x08
+#define ATC2609A_PMU_SYS_CTL9 0x09
+#define ATC2609A_PMU_BAT_CTL0 0x0A
+#define ATC2609A_PMU_BAT_CTL1 0x0B
+#define ATC2609A_PMU_VBUS_CTL0 0x0C
+#define ATC2609A_PMU_VBUS_CTL1 0x0D
+#define ATC2609A_PMU_WALL_CTL0 0x0E
+#define ATC2609A_PMU_WALL_CTL1 0x0F
+#define ATC2609A_PMU_SYS_PENDING 0x10
+#define ATC2609A_PMU_APDS_CTL0 0x11
+#define ATC2609A_PMU_APDS_CTL1 0x12
+#define ATC2609A_PMU_APDS_CTL2 0x13
+#define ATC2609A_PMU_CHARGER_CTL 0x14
+#define ATC2609A_PMU_BAKCHARGER_CTL 0x15
+#define ATC2609A_PMU_SWCHG_CTL0 0x16
+#define ATC2609A_PMU_SWCHG_CTL1 0x17
+#define ATC2609A_PMU_SWCHG_CTL2 0x18
+#define ATC2609A_PMU_SWCHG_CTL3 0x19
+#define ATC2609A_PMU_SWCHG_CTL4 0x1A
+#define ATC2609A_PMU_DC_OSC 0x1B
+#define ATC2609A_PMU_DC0_CTL0 0x1C
+#define ATC2609A_PMU_DC0_CTL1 0x1D
+#define ATC2609A_PMU_DC0_CTL2 0x1E
+#define ATC2609A_PMU_DC0_CTL3 0x1F
+#define ATC2609A_PMU_DC0_CTL4 0x20
+#define ATC2609A_PMU_DC0_CTL5 0x21
+#define ATC2609A_PMU_DC0_CTL6 0x22
+#define ATC2609A_PMU_DC1_CTL0 0x23
+#define ATC2609A_PMU_DC1_CTL1 0x24
+#define ATC2609A_PMU_DC1_CTL2 0x25
+#define ATC2609A_PMU_DC1_CTL3 0x26
+#define ATC2609A_PMU_DC1_CTL4 0x27
+#define ATC2609A_PMU_DC1_CTL5 0x28
+#define ATC2609A_PMU_DC1_CTL6 0x29
+#define ATC2609A_PMU_DC2_CTL0 0x2A
+#define ATC2609A_PMU_DC2_CTL1 0x2B
+#define ATC2609A_PMU_DC2_CTL2 0x2C
+#define ATC2609A_PMU_DC2_CTL3 0x2D
+#define ATC2609A_PMU_DC2_CTL4 0x2E
+#define ATC2609A_PMU_DC2_CTL5 0x2F
+#define ATC2609A_PMU_DC2_CTL6 0x30
+#define ATC2609A_PMU_DC3_CTL0 0x31
+#define ATC2609A_PMU_DC3_CTL1 0x32
+#define ATC2609A_PMU_DC3_CTL2 0x33
+#define ATC2609A_PMU_DC3_CTL3 0x34
+#define ATC2609A_PMU_DC3_CTL4 0x35
+#define ATC2609A_PMU_DC3_CTL5 0x36
+#define ATC2609A_PMU_DC3_CTL6 0x37
+#define ATC2609A_PMU_DC_ZR 0x38
+#define ATC2609A_PMU_LDO0_CTL0 0x39
+#define ATC2609A_PMU_LDO0_CTL1 0x3A
+#define ATC2609A_PMU_LDO1_CTL0 0x3B
+#define ATC2609A_PMU_LDO1_CTL1 0x3C
+#define ATC2609A_PMU_LDO2_CTL0 0x3D
+#define ATC2609A_PMU_LDO2_CTL1 0x3E
+#define ATC2609A_PMU_LDO3_CTL0 0x3F
+#define ATC2609A_PMU_LDO3_CTL1 0x40
+#define ATC2609A_PMU_LDO4_CTL0 0x41
+#define ATC2609A_PMU_LDO4_CTL1 0x42
+#define ATC2609A_PMU_LDO5_CTL0 0x43
+#define ATC2609A_PMU_LDO5_CTL1 0x44
+#define ATC2609A_PMU_LDO6_CTL0 0x45
+#define ATC2609A_PMU_LDO6_CTL1 0x46
+#define ATC2609A_PMU_LDO7_CTL0 0x47
+#define ATC2609A_PMU_LDO7_CTL1 0x48
+#define ATC2609A_PMU_LDO8_CTL0 0x49
+#define ATC2609A_PMU_LDO8_CTL1 0x4A
+#define ATC2609A_PMU_LDO9_CTL 0x4B
+#define ATC2609A_PMU_OV_INT_EN 0x4C
+#define ATC2609A_PMU_OV_STATUS 0x4D
+#define ATC2609A_PMU_UV_INT_EN 0x4E
+#define ATC2609A_PMU_UV_STATUS 0x4F
+#define ATC2609A_PMU_OC_INT_EN 0x50
+#define ATC2609A_PMU_OC_STATUS 0x51
+#define ATC2609A_PMU_OT_CTL 0x52
+#define ATC2609A_PMU_CM_CTL0 0x53
+#define ATC2609A_PMU_FW_USE0 0x54
+#define ATC2609A_PMU_FW_USE1 0x55
+#define ATC2609A_PMU_ADC12B_I 0x56
+#define ATC2609A_PMU_ADC12B_V 0x57
+#define ATC2609A_PMU_ADC12B_DUMMY 0x58
+#define ATC2609A_PMU_AUXADC_CTL0 0x59
+#define ATC2609A_PMU_AUXADC_CTL1 0x5A
+#define ATC2609A_PMU_BATVADC 0x5B
+#define ATC2609A_PMU_BATIADC 0x5C
+#define ATC2609A_PMU_WALLVADC 0x5D
+#define ATC2609A_PMU_WALLIADC 0x5E
+#define ATC2609A_PMU_VBUSVADC 0x5F
+#define ATC2609A_PMU_VBUSIADC 0x60
+#define ATC2609A_PMU_SYSPWRADC 0x61
+#define ATC2609A_PMU_REMCONADC 0x62
+#define ATC2609A_PMU_SVCCADC 0x63
+#define ATC2609A_PMU_CHGIADC 0x64
+#define ATC2609A_PMU_IREFADC 0x65
+#define ATC2609A_PMU_BAKBATADC 0x66
+#define ATC2609A_PMU_ICTEMPADC 0x67
+#define ATC2609A_PMU_AUXADC0 0x68
+#define ATC2609A_PMU_AUXADC1 0x69
+#define ATC2609A_PMU_AUXADC2 0x6A
+#define ATC2609A_PMU_AUXADC3 0x6B
+#define ATC2609A_PMU_ICTEMPADC_ADJ 0x6C
+#define ATC2609A_PMU_BDG_CTL 0x6D
+#define ATC2609A_RTC_CTL 0x6E
+#define ATC2609A_RTC_MSALM 0x6F
+#define ATC2609A_RTC_HALM 0x70
+#define ATC2609A_RTC_YMDALM 0x71
+#define ATC2609A_RTC_MS 0x72
+#define ATC2609A_RTC_H 0x73
+#define ATC2609A_RTC_DC 0x74
+#define ATC2609A_RTC_YMD 0x75
+#define ATC2609A_EFUSE_DAT 0x76
+#define ATC2609A_EFUSECRTL1 0x77
+#define ATC2609A_EFUSECRTL2 0x78
+#define ATC2609A_PMU_DC4_CTL0 0x79
+#define ATC2609A_PMU_DC4_CTL1 0x7A
+#define ATC2609A_PMU_DC4_CTL2 0x7B
+#define ATC2609A_PMU_DC4_CTL3 0x7C
+#define ATC2609A_PMU_DC4_CTL4 0x7D
+#define ATC2609A_PMU_DC4_CTL5 0x7E
+#define ATC2609A_PMU_DC4_CTL6 0x7F
+#define ATC2609A_PMU_PWR_STATUS 0x80
+#define ATC2609A_PMU_S2_PWR 0x81
+#define ATC2609A_CLMT_CTL0 0x82
+#define ATC2609A_CLMT_DATA0 0x83
+#define ATC2609A_CLMT_DATA1 0x84
+#define ATC2609A_CLMT_DATA2 0x85
+#define ATC2609A_CLMT_DATA3 0x86
+#define ATC2609A_CLMT_ADD0 0x87
+#define ATC2609A_CLMT_ADD1 0x88
+#define ATC2609A_CLMT_OCV_TABLE 0x89
+#define ATC2609A_CLMT_R_TABLE 0x8A
+#define ATC2609A_PMU_PWRON_CTL0 0x8D
+#define ATC2609A_PMU_PWRON_CTL1 0x8E
+#define ATC2609A_PMU_PWRON_CTL2 0x8F
+#define ATC2609A_IRC_CTL 0x90
+#define ATC2609A_IRC_STAT 0x91
+#define ATC2609A_IRC_CC 0x92
+#define ATC2609A_IRC_KDC 0x93
+#define ATC2609A_IRC_WK 0x94
+#define ATC2609A_IRC_RCC 0x95
+
+/* AUDIO_OUT Registers */
+#define ATC2609A_AUDIOINOUT_CTL 0xA0
+#define ATC2609A_AUDIO_DEBUGOUTCTL 0xA1
+#define ATC2609A_DAC_DIGITALCTL 0xA2
+#define ATC2609A_DAC_VOLUMECTL0 0xA3
+#define ATC2609A_DAC_ANALOG0 0xA4
+#define ATC2609A_DAC_ANALOG1 0xA5
+#define ATC2609A_DAC_ANALOG2 0xA6
+#define ATC2609A_DAC_ANALOG3 0xA7
+
+/* AUDIO_IN Registers */
+#define ATC2609A_ADC_DIGITALCTL 0xA8
+#define ATC2609A_ADC_HPFCTL 0xA9
+#define ATC2609A_ADC_CTL 0xAA
+#define ATC2609A_AGC_CTL0 0xAB
+#define ATC2609A_AGC_CTL1 0xAC
+#define ATC2609A_AGC_CTL2 0xAD
+#define ATC2609A_ADC_ANALOG0 0xAE
+#define ATC2609A_ADC_ANALOG1 0xAF
+
+/* PCM_IF Registers */
+#define ATC2609A_PCM0_CTL 0xB0
+#define ATC2609A_PCM1_CTL 0xB1
+#define ATC2609A_PCM2_CTL 0xB2
+#define ATC2609A_PCMIF_CTL 0xB3
+
+/* CMU_CONTROL Registers */
+#define ATC2609A_CMU_DEVRST 0xC1
+
+/* INTS Registers */
+#define ATC2609A_INTS_PD 0xC8
+#define ATC2609A_INTS_MSK 0xC9
+
+/* MFP Registers */
+#define ATC2609A_MFP_CTL 0xD0
+#define ATC2609A_PAD_VSEL 0xD1
+#define ATC2609A_GPIO_OUTEN 0xD2
+#define ATC2609A_GPIO_INEN 0xD3
+#define ATC2609A_GPIO_DAT 0xD4
+#define ATC2609A_PAD_DRV 0xD5
+#define ATC2609A_PAD_EN 0xD6
+#define ATC2609A_DEBUG_SEL 0xD7
+#define ATC2609A_DEBUG_IE 0xD8
+#define ATC2609A_DEBUG_OE 0xD9
+#define ATC2609A_CHIP_VER 0xDC
+
+/* PWSI Registers */
+#define ATC2609A_PWSI_CTL 0xF0
+#define ATC2609A_PWSI_STATUS 0xF1
+
+/* TWSI Registers */
+#define ATC2609A_SADDR 0xFF
+
+/* PMU_SYS_CTL0 Register Mask Bits */
+#define ATC2609A_PMU_SYS_CTL0_IR_WK_EN BIT(5)
+#define ATC2609A_PMU_SYS_CTL0_RESET_WK_EN BIT(6)
+#define ATC2609A_PMU_SYS_CTL0_HDSW_WK_EN BIT(7)
+#define ATC2609A_PMU_SYS_CTL0_ALARM_WK_EN BIT(8)
+#define ATC2609A_PMU_SYS_CTL0_REM_CON_WK_EN BIT(9)
+#define ATC2609A_PMU_SYS_CTL0_RESTART_EN BIT(10)
+#define ATC2609A_PMU_SYS_CTL0_WKIRQ_WK_EN BIT(11)
+#define ATC2609A_PMU_SYS_CTL0_ONOFF_SHORT_WK_EN BIT(12)
+#define ATC2609A_PMU_SYS_CTL0_ONOFF_LONG_WK_EN BIT(13)
+#define ATC2609A_PMU_SYS_CTL0_WALL_WK_EN BIT(14)
+#define ATC2609A_PMU_SYS_CTL0_USB_WK_EN BIT(15)
+#define ATC2609A_PMU_SYS_CTL0_WK_ALL (GENMASK(15, 5) & (~BIT(10)))
+
+/* PMU_SYS_CTL1 Register Mask Bits */
+#define ATC2609A_PMU_SYS_CTL1_EN_S1 BIT(0)
+#define ATC2609A_PMU_SYS_CTL1_LB_S4_EN BIT(2)
+#define ATC2609A_PMU_SYS_CTL1_LB_S4 GENMASK(4, 3)
+#define ATC2609A_PMU_SYS_CTL1_LB_S4_3_1V BIT(4)
+#define ATC2609A_PMU_SYS_CTL1_IR_WK_FLAG BIT(5)
+#define ATC2609A_PMU_SYS_CTL1_RESET_WK_FLAG BIT(6)
+#define ATC2609A_PMU_SYS_CTL1_HDSW_WK_FLAG BIT(7)
+#define ATC2609A_PMU_SYS_CTL1_ALARM_WK_FLAG BIT(8)
+#define ATC2609A_PMU_SYS_CTL1_REM_CON_WK_FLAG BIT(9)
+#define ATC2609A_PMU_SYS_CTL1_RESTART_WK_FLAG BIT(10)
+#define ATC2609A_PMU_SYS_CTL1_WKIRQ_WK_FLAG BIT(11)
+#define ATC2609A_PMU_SYS_CTL1_ONOFF_SHORT_WK_FLAG BIT(12)
+#define ATC2609A_PMU_SYS_CTL1_ONOFF_LONG_WK_FLAG BIT(13)
+#define ATC2609A_PMU_SYS_CTL1_WALL_WK_FLAG BIT(14)
+#define ATC2609A_PMU_SYS_CTL1_USB_WK_FLAG BIT(15)
+
+/* PMU_SYS_CTL2 Register Mask Bits */
+#define ATC2609A_PMU_SYS_CTL2_PMU_A_EN BIT(0)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_INT_EN BIT(1)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_PD BIT(2)
+#define ATC2609A_PMU_SYS_CTL2_S2TIMER GENMASK(5, 3)
+#define ATC2609A_PMU_SYS_CTL2_S2_TIMER_EN BIT(6)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_TIME_SEL GENMASK(8, 7)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_RESET_EN BIT(9)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS_TIME GENMASK(11, 10)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_LSP_INT_EN BIT(12)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_LONG_PRESS BIT(13)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_SHORT_PRESS BIT(14)
+#define ATC2609A_PMU_SYS_CTL2_ONOFF_PRESS BIT(15)
+
+/* PMU_SYS_CTL3 Register Mask Bits */
+#define ATC2609A_PMU_SYS_CTL3_S2S3TOS1_TIMER GENMASK(8, 7)
+#define ATC2609A_PMU_SYS_CTL3_S2S3TOS1_TIMER_EN BIT(9)
+#define ATC2609A_PMU_SYS_CTL3_S3_TIMER GENMASK(12, 10)
+#define ATC2609A_PMU_SYS_CTL3_S3_TIMER_EN BIT(13)
+#define ATC2609A_PMU_SYS_CTL3_EN_S3 BIT(14)
+#define ATC2609A_PMU_SYS_CTL3_EN_S2 BIT(15)
+
+/* PMU_SYS_CTL5 Register Mask Bits */
+#define ATC2609A_PMU_SYS_CTL5_WALLWKDTEN BIT(7)
+#define ATC2609A_PMU_SYS_CTL5_VBUSWKDTEN BIT(8)
+#define ATC2609A_PMU_SYS_CTL5_REMCON_DECT_EN BIT(9)
+#define ATC2609A_PMU_SYS_CTL5_ONOFF_8S_SEL BIT(10)
+
+/* INTS_MSK Register Mask Bits */
+#define ATC2609A_INTS_MSK_AUDIO BIT(0)
+#define ATC2609A_INTS_MSK_OV BIT(1)
+#define ATC2609A_INTS_MSK_OC BIT(2)
+#define ATC2609A_INTS_MSK_OT BIT(3)
+#define ATC2609A_INTS_MSK_UV BIT(4)
+#define ATC2609A_INTS_MSK_ALARM BIT(5)
+#define ATC2609A_INTS_MSK_ONOFF BIT(6)
+#define ATC2609A_INTS_MSK_WKUP BIT(7)
+#define ATC2609A_INTS_MSK_IR BIT(8)
+#define ATC2609A_INTS_MSK_REMCON BIT(9)
+#define ATC2609A_INTS_MSK_POWERIN BIT(10)
+
+/* CMU_DEVRST Register Mask Bits */
+#define ATC2609A_CMU_DEVRST_AUDIO BIT(0)
+#define ATC2609A_CMU_DEVRST_MFP BIT(1)
+#define ATC2609A_CMU_DEVRST_INTS BIT(2)
+
+/* PAD_EN Register Mask Bits */
+#define ATC2609A_PAD_EN_EXTIRQ BIT(0)
+
+#endif /* __LINUX_MFD_ATC260X_ATC2609A_H */
diff --git a/include/linux/mfd/atc260x/core.h b/include/linux/mfd/atc260x/core.h
new file mode 100644
index 000000000000..777b6c345d44
--- /dev/null
+++ b/include/linux/mfd/atc260x/core.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Core MFD defines for ATC260x PMICs
+ *
+ * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+ */
+
+#ifndef __LINUX_MFD_ATC260X_CORE_H
+#define __LINUX_MFD_ATC260X_CORE_H
+
+#include <linux/mfd/atc260x/atc2603c.h>
+#include <linux/mfd/atc260x/atc2609a.h>
+
+enum atc260x_type {
+ ATC2603A = 0,
+ ATC2603C,
+ ATC2609A,
+};
+
+enum atc260x_ver {
+ ATC260X_A = 0,
+ ATC260X_B,
+ ATC260X_C,
+ ATC260X_D,
+ ATC260X_E,
+ ATC260X_F,
+ ATC260X_G,
+ ATC260X_H,
+};
+
+struct atc260x {
+ struct device *dev;
+
+ struct regmap *regmap;
+ const struct regmap_irq_chip *regmap_irq_chip;
+ struct regmap_irq_chip_data *irq_data;
+
+ struct mutex *regmap_mutex; /* mutex for custom regmap locking */
+
+ const struct mfd_cell *cells;
+ int nr_cells;
+ int irq;
+
+ enum atc260x_type ic_type;
+ enum atc260x_ver ic_ver;
+ const char *type_name;
+ unsigned int rev_reg;
+
+ const struct atc260x_init_regs *init_regs; /* regs for device init */
+};
+
+struct regmap_config;
+
+int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg);
+int atc260x_device_probe(struct atc260x *atc260x);
+
+#endif /* __LINUX_MFD_ATC260X_CORE_H */
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 2009c4b936d9..0bc7cba798a3 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -50,7 +50,7 @@
#define MFD_DEP_LEVEL_HIGH 1
struct irq_domain;
-struct property_entry;
+struct software_node;
/* Matches ACPI PNP id, either _HID or _CID, or ACPI _ADR */
struct mfd_cell_acpi_match {
@@ -78,8 +78,8 @@ struct mfd_cell {
void *platform_data;
size_t pdata_size;
- /* device properties passed to the sub devices drivers */
- const struct property_entry *properties;
+ /* Software node for the device. */
+ const struct software_node *swnode;
/*
* Device Tree compatible string
diff --git a/include/linux/mfd/da9063/registers.h b/include/linux/mfd/da9063/registers.h
index 1dbabf1b3cb8..6e0f66a2e727 100644
--- a/include/linux/mfd/da9063/registers.h
+++ b/include/linux/mfd/da9063/registers.h
@@ -1037,6 +1037,9 @@
#define DA9063_NONKEY_PIN_AUTODOWN 0x02
#define DA9063_NONKEY_PIN_AUTOFLPRT 0x03
+/* DA9063_REG_CONFIG_J (addr=0x10F) */
+#define DA9063_TWOWIRE_TO 0x40
+
/* DA9063_REG_MON_REG_5 (addr=0x116) */
#define DA9063_MON_A8_IDX_MASK 0x07
#define DA9063_MON_A8_IDX_NONE 0x00
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 4b63d3ecdcff..a62de3d155ed 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -720,7 +720,7 @@ static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
static inline bool db8500_prcmu_is_ac_wake_requested(void)
{
- return 0;
+ return false;
}
static inline int db8500_prcmu_set_arm_opp(u8 opp)
diff --git a/include/linux/mfd/intel-m10-bmc.h b/include/linux/mfd/intel-m10-bmc.h
index 74d4e193966a..f0044b14136e 100644
--- a/include/linux/mfd/intel-m10-bmc.h
+++ b/include/linux/mfd/intel-m10-bmc.h
@@ -9,9 +9,15 @@
#include <linux/regmap.h>
-#define M10BMC_LEGACY_SYS_BASE 0x300400
+#define M10BMC_LEGACY_BUILD_VER 0x300468
#define M10BMC_SYS_BASE 0x300800
-#define M10BMC_MEM_END 0x200000fc
+#define M10BMC_SYS_END 0x300fff
+#define M10BMC_FLASH_BASE 0x10000000
+#define M10BMC_FLASH_END 0x1fffffff
+#define M10BMC_MEM_END M10BMC_FLASH_END
+
+#define M10BMC_STAGING_BASE 0x18000000
+#define M10BMC_STAGING_SIZE 0x3800000
/* Register offset of system registers */
#define NIOS2_FW_VERSION 0x0
@@ -30,6 +36,88 @@
#define M10BMC_VER_PCB_INFO_MSK GENMASK(31, 24)
#define M10BMC_VER_LEGACY_INVALID 0xffffffff
+/* Secure update doorbell register, in system register region */
+#define M10BMC_DOORBELL 0x400
+
+/* Authorization Result register, in system register region */
+#define M10BMC_AUTH_RESULT 0x404
+
+/* Doorbell register fields */
+#define DRBL_RSU_REQUEST BIT(0)
+#define DRBL_RSU_PROGRESS GENMASK(7, 4)
+#define DRBL_HOST_STATUS GENMASK(11, 8)
+#define DRBL_RSU_STATUS GENMASK(23, 16)
+#define DRBL_PKVL_EEPROM_LOAD_SEC BIT(24)
+#define DRBL_PKVL1_POLL_EN BIT(25)
+#define DRBL_PKVL2_POLL_EN BIT(26)
+#define DRBL_CONFIG_SEL BIT(28)
+#define DRBL_REBOOT_REQ BIT(29)
+#define DRBL_REBOOT_DISABLED BIT(30)
+
+/* Progress states */
+#define RSU_PROG_IDLE 0x0
+#define RSU_PROG_PREPARE 0x1
+#define RSU_PROG_READY 0x3
+#define RSU_PROG_AUTHENTICATING 0x4
+#define RSU_PROG_COPYING 0x5
+#define RSU_PROG_UPDATE_CANCEL 0x6
+#define RSU_PROG_PROGRAM_KEY_HASH 0x7
+#define RSU_PROG_RSU_DONE 0x8
+#define RSU_PROG_PKVL_PROM_DONE 0x9
+
+/* Device and error states */
+#define RSU_STAT_NORMAL 0x0
+#define RSU_STAT_TIMEOUT 0x1
+#define RSU_STAT_AUTH_FAIL 0x2
+#define RSU_STAT_COPY_FAIL 0x3
+#define RSU_STAT_FATAL 0x4
+#define RSU_STAT_PKVL_REJECT 0x5
+#define RSU_STAT_NON_INC 0x6
+#define RSU_STAT_ERASE_FAIL 0x7
+#define RSU_STAT_WEAROUT 0x8
+#define RSU_STAT_NIOS_OK 0x80
+#define RSU_STAT_USER_OK 0x81
+#define RSU_STAT_FACTORY_OK 0x82
+#define RSU_STAT_USER_FAIL 0x83
+#define RSU_STAT_FACTORY_FAIL 0x84
+#define RSU_STAT_NIOS_FLASH_ERR 0x85
+#define RSU_STAT_FPGA_FLASH_ERR 0x86
+
+#define HOST_STATUS_IDLE 0x0
+#define HOST_STATUS_WRITE_DONE 0x1
+#define HOST_STATUS_ABORT_RSU 0x2
+
+#define rsu_prog(doorbell) FIELD_GET(DRBL_RSU_PROGRESS, doorbell)
+#define rsu_stat(doorbell) FIELD_GET(DRBL_RSU_STATUS, doorbell)
+
+/* interval 100ms and timeout 5s */
+#define NIOS_HANDSHAKE_INTERVAL_US (100 * 1000)
+#define NIOS_HANDSHAKE_TIMEOUT_US (5 * 1000 * 1000)
+
+/* RSU PREP Timeout (2 minutes) to erase flash staging area */
+#define RSU_PREP_INTERVAL_MS 100
+#define RSU_PREP_TIMEOUT_MS (2 * 60 * 1000)
+
+/* RSU Complete Timeout (40 minutes) for full flash update */
+#define RSU_COMPLETE_INTERVAL_MS 1000
+#define RSU_COMPLETE_TIMEOUT_MS (40 * 60 * 1000)
+
+/* Addresses for security related data in FLASH */
+#define BMC_REH_ADDR 0x17ffc004
+#define BMC_PROG_ADDR 0x17ffc000
+#define BMC_PROG_MAGIC 0x5746
+
+#define SR_REH_ADDR 0x17ffd004
+#define SR_PROG_ADDR 0x17ffd000
+#define SR_PROG_MAGIC 0x5253
+
+#define PR_REH_ADDR 0x17ffe004
+#define PR_PROG_ADDR 0x17ffe000
+#define PR_PROG_MAGIC 0x5250
+
+/* Address of 4KB inverted bit vector containing staging area FLASH count */
+#define STAGING_FLASH_COUNT 0x17ffb000
+
/**
* struct intel_m10bmc - Intel MAX 10 BMC parent driver data structure
* @dev: this device
diff --git a/include/linux/mfd/lp87565.h b/include/linux/mfd/lp87565.h
index d44ddfb6bb63..5640e6088fe6 100644
--- a/include/linux/mfd/lp87565.h
+++ b/include/linux/mfd/lp87565.h
@@ -237,9 +237,6 @@ enum lp87565_device_type {
#define LP87565_GOIO2_OUT BIT(1)
#define LP87565_GOIO1_OUT BIT(0)
-/* Number of step-down converters available */
-#define LP87565_NUM_BUCK 6
-
enum LP87565_regulator_id {
/* BUCK's */
LP87565_BUCK_0,
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index e955e2f0a2cc..6c98edcf4b0b 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -14,13 +14,13 @@
* others and b) it can be enabled simply by using MAX17042 driver.
*/
-#ifndef __LINUX_MFD_MAX8998_H
-#define __LINUX_MFD_MAX8998_H
+#ifndef __LINUX_MFD_MAX8997_H
+#define __LINUX_MFD_MAX8997_H
#include <linux/regulator/consumer.h>
/* MAX8997/8966 regulator IDs */
-enum max8998_regulators {
+enum max8997_regulators {
MAX8997_LDO1 = 0,
MAX8997_LDO2,
MAX8997_LDO3,
@@ -207,4 +207,4 @@ struct max8997_platform_data {
struct max8997_led_platform_data *led_pdata;
};
-#endif /* __LINUX_MFD_MAX8998_H */
+#endif /* __LINUX_MFD_MAX8997_H */
diff --git a/include/linux/mfd/ntxec.h b/include/linux/mfd/ntxec.h
new file mode 100644
index 000000000000..26ab3b8eb612
--- /dev/null
+++ b/include/linux/mfd/ntxec.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2020 Jonathan Neuschäfer
+ *
+ * Register access and version information for the Netronix embedded
+ * controller.
+ */
+
+#ifndef NTXEC_H
+#define NTXEC_H
+
+#include <linux/types.h>
+
+struct device;
+struct regmap;
+
+struct ntxec {
+ struct device *dev;
+ struct regmap *regmap;
+};
+
+/*
+ * Some registers, such as the battery status register (0x41), are in
+ * big-endian, but others only have eight significant bits, which are in the
+ * first byte transmitted over I2C (the MSB of the big-endian value).
+ * This convenience function converts an 8-bit value to 16-bit for use in the
+ * second kind of register.
+ */
+static inline __be16 ntxec_reg8(u8 value)
+{
+ return value << 8;
+}
+
+/* Known firmware versions */
+#define NTXEC_VERSION_KOBO_AURA 0xd726 /* found in Kobo Aura */
+#define NTXEC_VERSION_TOLINO_SHINE2 0xf110 /* found in Tolino Shine 2 HD */
+
+#endif
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index fba0df13d9a8..8aa0bda1af4f 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -188,6 +188,7 @@
#define RN5T618_CHGOSCSCORESET3 0xd7
#define RN5T618_CHGOSCFREQSET1 0xd8
#define RN5T618_CHGOSCFREQSET2 0xd9
+#define RN5T618_GCHGDET 0xda
#define RN5T618_CONTROL 0xe0
#define RN5T618_SOC 0xe1
#define RN5T618_RE_CAP_H 0xe2
diff --git a/include/linux/mfd/rohm-bd71815.h b/include/linux/mfd/rohm-bd71815.h
new file mode 100644
index 000000000000..ec6d9612bebe
--- /dev/null
+++ b/include/linux/mfd/rohm-bd71815.h
@@ -0,0 +1,562 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2021 ROHM Semiconductors.
+ *
+ * Author: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ *
+ * Copyright 2014 Embest Technology Co. Ltd. Inc.
+ *
+ * Author: yanglsh@embest-tech.com
+ */
+
+#ifndef _MFD_BD71815_H
+#define _MFD_BD71815_H
+
+#include <linux/regmap.h>
+
+enum {
+ BD71815_BUCK1 = 0,
+ BD71815_BUCK2,
+ BD71815_BUCK3,
+ BD71815_BUCK4,
+ BD71815_BUCK5,
+ /* General Purpose */
+ BD71815_LDO1,
+ BD71815_LDO2,
+ BD71815_LDO3,
+ /* LDOs for SD Card and SD Card Interface */
+ BD71815_LDO4,
+ BD71815_LDO5,
+ /* LDO for DDR Reference Voltage */
+ BD71815_LDODVREF,
+ /* LDO for Low-Power State Retention */
+ BD71815_LDOLPSR,
+ BD71815_WLED,
+ BD71815_REGULATOR_CNT,
+};
+
+#define BD71815_SUPPLY_STATE_ENABLED 0x1
+
+enum {
+ BD71815_REG_DEVICE = 0,
+ BD71815_REG_PWRCTRL,
+ BD71815_REG_BUCK1_MODE,
+ BD71815_REG_BUCK2_MODE,
+ BD71815_REG_BUCK3_MODE,
+ BD71815_REG_BUCK4_MODE,
+ BD71815_REG_BUCK5_MODE,
+ BD71815_REG_BUCK1_VOLT_H,
+ BD71815_REG_BUCK1_VOLT_L,
+ BD71815_REG_BUCK2_VOLT_H,
+ BD71815_REG_BUCK2_VOLT_L,
+ BD71815_REG_BUCK3_VOLT,
+ BD71815_REG_BUCK4_VOLT,
+ BD71815_REG_BUCK5_VOLT,
+ BD71815_REG_LED_CTRL,
+ BD71815_REG_LED_DIMM,
+ BD71815_REG_LDO_MODE1,
+ BD71815_REG_LDO_MODE2,
+ BD71815_REG_LDO_MODE3,
+ BD71815_REG_LDO_MODE4,
+ BD71815_REG_LDO1_VOLT,
+ BD71815_REG_LDO2_VOLT,
+ BD71815_REG_LDO3_VOLT,
+ BD71815_REG_LDO4_VOLT,
+ BD71815_REG_LDO5_VOLT_H,
+ BD71815_REG_LDO5_VOLT_L,
+ BD71815_REG_BUCK_PD_DIS,
+ BD71815_REG_LDO_PD_DIS,
+ BD71815_REG_GPO,
+ BD71815_REG_OUT32K,
+ BD71815_REG_SEC,
+ BD71815_REG_MIN,
+ BD71815_REG_HOUR,
+ BD71815_REG_WEEK,
+ BD71815_REG_DAY,
+ BD71815_REG_MONTH,
+ BD71815_REG_YEAR,
+ BD71815_REG_ALM0_SEC,
+
+ BD71815_REG_ALM1_SEC = 0x2C,
+
+ BD71815_REG_ALM0_MASK = 0x33,
+ BD71815_REG_ALM1_MASK,
+ BD71815_REG_ALM2,
+ BD71815_REG_TRIM,
+ BD71815_REG_CONF,
+ BD71815_REG_SYS_INIT,
+ BD71815_REG_CHG_STATE,
+ BD71815_REG_CHG_LAST_STATE,
+ BD71815_REG_BAT_STAT,
+ BD71815_REG_DCIN_STAT,
+ BD71815_REG_VSYS_STAT,
+ BD71815_REG_CHG_STAT,
+ BD71815_REG_CHG_WDT_STAT,
+ BD71815_REG_BAT_TEMP,
+ BD71815_REG_IGNORE_0,
+ BD71815_REG_INHIBIT_0,
+ BD71815_REG_DCIN_CLPS,
+ BD71815_REG_VSYS_REG,
+ BD71815_REG_VSYS_MAX,
+ BD71815_REG_VSYS_MIN,
+ BD71815_REG_CHG_SET1,
+ BD71815_REG_CHG_SET2,
+ BD71815_REG_CHG_WDT_PRE,
+ BD71815_REG_CHG_WDT_FST,
+ BD71815_REG_CHG_IPRE,
+ BD71815_REG_CHG_IFST,
+ BD71815_REG_CHG_IFST_TERM,
+ BD71815_REG_CHG_VPRE,
+ BD71815_REG_CHG_VBAT_1,
+ BD71815_REG_CHG_VBAT_2,
+ BD71815_REG_CHG_VBAT_3,
+ BD71815_REG_CHG_LED_1,
+ BD71815_REG_VF_TH,
+ BD71815_REG_BAT_SET_1,
+ BD71815_REG_BAT_SET_2,
+ BD71815_REG_BAT_SET_3,
+ BD71815_REG_ALM_VBAT_TH_U,
+ BD71815_REG_ALM_VBAT_TH_L,
+ BD71815_REG_ALM_DCIN_TH,
+ BD71815_REG_ALM_VSYS_TH,
+ BD71815_REG_VM_IBAT_U,
+ BD71815_REG_VM_IBAT_L,
+ BD71815_REG_VM_VBAT_U,
+ BD71815_REG_VM_VBAT_L,
+ BD71815_REG_VM_BTMP,
+ BD71815_REG_VM_VTH,
+ BD71815_REG_VM_DCIN_U,
+ BD71815_REG_VM_DCIN_L,
+ BD71815_REG_VM_VSYS,
+ BD71815_REG_VM_VF,
+ BD71815_REG_VM_OCI_PRE_U,
+ BD71815_REG_VM_OCI_PRE_L,
+ BD71815_REG_VM_OCV_PRE_U,
+ BD71815_REG_VM_OCV_PRE_L,
+ BD71815_REG_VM_OCI_PST_U,
+ BD71815_REG_VM_OCI_PST_L,
+ BD71815_REG_VM_OCV_PST_U,
+ BD71815_REG_VM_OCV_PST_L,
+ BD71815_REG_VM_SA_VBAT_U,
+ BD71815_REG_VM_SA_VBAT_L,
+ BD71815_REG_VM_SA_IBAT_U,
+ BD71815_REG_VM_SA_IBAT_L,
+ BD71815_REG_CC_CTRL,
+ BD71815_REG_CC_BATCAP1_TH_U,
+ BD71815_REG_CC_BATCAP1_TH_L,
+ BD71815_REG_CC_BATCAP2_TH_U,
+ BD71815_REG_CC_BATCAP2_TH_L,
+ BD71815_REG_CC_BATCAP3_TH_U,
+ BD71815_REG_CC_BATCAP3_TH_L,
+ BD71815_REG_CC_STAT,
+ BD71815_REG_CC_CCNTD_3,
+ BD71815_REG_CC_CCNTD_2,
+ BD71815_REG_CC_CCNTD_1,
+ BD71815_REG_CC_CCNTD_0,
+ BD71815_REG_CC_CURCD_U,
+ BD71815_REG_CC_CURCD_L,
+ BD71815_REG_VM_OCUR_THR_1,
+ BD71815_REG_VM_OCUR_DUR_1,
+ BD71815_REG_VM_OCUR_THR_2,
+ BD71815_REG_VM_OCUR_DUR_2,
+ BD71815_REG_VM_OCUR_THR_3,
+ BD71815_REG_VM_OCUR_DUR_3,
+ BD71815_REG_VM_OCUR_MON,
+ BD71815_REG_VM_BTMP_OV_THR,
+ BD71815_REG_VM_BTMP_OV_DUR,
+ BD71815_REG_VM_BTMP_LO_THR,
+ BD71815_REG_VM_BTMP_LO_DUR,
+ BD71815_REG_VM_BTMP_MON,
+ BD71815_REG_INT_EN_01,
+
+ BD71815_REG_INT_EN_11 = 0x95,
+ BD71815_REG_INT_EN_12,
+ BD71815_REG_INT_STAT,
+ BD71815_REG_INT_STAT_01,
+ BD71815_REG_INT_STAT_02,
+ BD71815_REG_INT_STAT_03,
+ BD71815_REG_INT_STAT_04,
+ BD71815_REG_INT_STAT_05,
+ BD71815_REG_INT_STAT_06,
+ BD71815_REG_INT_STAT_07,
+ BD71815_REG_INT_STAT_08,
+ BD71815_REG_INT_STAT_09,
+ BD71815_REG_INT_STAT_10,
+ BD71815_REG_INT_STAT_11,
+ BD71815_REG_INT_STAT_12,
+ BD71815_REG_INT_UPDATE,
+
+ BD71815_REG_VM_VSYS_U = 0xC0,
+ BD71815_REG_VM_VSYS_L,
+ BD71815_REG_VM_SA_VSYS_U,
+ BD71815_REG_VM_SA_VSYS_L,
+
+ BD71815_REG_VM_SA_IBAT_MIN_U = 0xD0,
+ BD71815_REG_VM_SA_IBAT_MIN_L,
+ BD71815_REG_VM_SA_IBAT_MAX_U,
+ BD71815_REG_VM_SA_IBAT_MAX_L,
+ BD71815_REG_VM_SA_VBAT_MIN_U,
+ BD71815_REG_VM_SA_VBAT_MIN_L,
+ BD71815_REG_VM_SA_VBAT_MAX_U,
+ BD71815_REG_VM_SA_VBAT_MAX_L,
+ BD71815_REG_VM_SA_VSYS_MIN_U,
+ BD71815_REG_VM_SA_VSYS_MIN_L,
+ BD71815_REG_VM_SA_VSYS_MAX_U,
+ BD71815_REG_VM_SA_VSYS_MAX_L,
+ BD71815_REG_VM_SA_MINMAX_CLR,
+
+ BD71815_REG_REX_CCNTD_3 = 0xE0,
+ BD71815_REG_REX_CCNTD_2,
+ BD71815_REG_REX_CCNTD_1,
+ BD71815_REG_REX_CCNTD_0,
+ BD71815_REG_REX_SA_VBAT_U,
+ BD71815_REG_REX_SA_VBAT_L,
+ BD71815_REG_REX_CTRL_1,
+ BD71815_REG_REX_CTRL_2,
+ BD71815_REG_FULL_CCNTD_3,
+ BD71815_REG_FULL_CCNTD_2,
+ BD71815_REG_FULL_CCNTD_1,
+ BD71815_REG_FULL_CCNTD_0,
+ BD71815_REG_FULL_CTRL,
+
+ BD71815_REG_CCNTD_CHG_3 = 0xF0,
+ BD71815_REG_CCNTD_CHG_2,
+
+ BD71815_REG_TEST_MODE = 0xFE,
+ BD71815_MAX_REGISTER,
+};
+
+/* BD71815_REG_BUCK1_MODE bits */
+#define BD71815_BUCK_RAMPRATE_MASK 0xC0
+#define BD71815_BUCK_RAMPRATE_10P00MV 0x0
+#define BD71815_BUCK_RAMPRATE_5P00MV 0x01
+#define BD71815_BUCK_RAMPRATE_2P50MV 0x02
+#define BD71815_BUCK_RAMPRATE_1P25MV 0x03
+
+#define BD71815_BUCK_PWM_FIXED BIT(4)
+#define BD71815_BUCK_SNVS_ON BIT(3)
+#define BD71815_BUCK_RUN_ON BIT(2)
+#define BD71815_BUCK_LPSR_ON BIT(1)
+#define BD71815_BUCK_SUSP_ON BIT(0)
+
+/* BD71815_REG_BUCK1_VOLT_H bits */
+#define BD71815_BUCK_DVSSEL BIT(7)
+#define BD71815_BUCK_STBY_DVS BIT(6)
+#define BD71815_VOLT_MASK 0x3F
+#define BD71815_BUCK1_H_DEFAULT 0x14
+#define BD71815_BUCK1_L_DEFAULT 0x14
+
+/* BD71815_REG_BUCK2_VOLT_H bits */
+#define BD71815_BUCK2_H_DEFAULT 0x14
+#define BD71815_BUCK2_L_DEFAULT 0x14
+
+/* WLED output */
+/* current register mask */
+#define LED_DIMM_MASK 0x3f
+/* LED enable bits at LED_CTRL reg */
+#define LED_CHGDONE_EN BIT(4)
+#define LED_RUN_ON BIT(2)
+#define LED_LPSR_ON BIT(1)
+#define LED_SUSP_ON BIT(0)
+
+/* BD71815_REG_LDO1_CTRL bits */
+#define LDO1_EN BIT(0)
+#define LDO2_EN BIT(1)
+#define LDO3_EN BIT(2)
+#define DVREF_EN BIT(3)
+#define VOSNVS_SW_EN BIT(4)
+
+/* LDO_MODE1_register */
+#define LDO1_SNVS_ON BIT(7)
+#define LDO1_RUN_ON BIT(6)
+#define LDO1_LPSR_ON BIT(5)
+#define LDO1_SUSP_ON BIT(4)
+/* set => register control, unset => GPIO control */
+#define LDO4_MODE_MASK BIT(3)
+#define LDO4_MODE_I2C BIT(3)
+#define LDO4_MODE_GPIO 0
+/* set => register control, unset => start when DCIN connected */
+#define LDO3_MODE_MASK BIT(2)
+#define LDO3_MODE_I2C BIT(2)
+#define LDO3_MODE_DCIN 0
+
+/* LDO_MODE2 register */
+#define LDO3_SNVS_ON BIT(7)
+#define LDO3_RUN_ON BIT(6)
+#define LDO3_LPSR_ON BIT(5)
+#define LDO3_SUSP_ON BIT(4)
+#define LDO2_SNVS_ON BIT(3)
+#define LDO2_RUN_ON BIT(2)
+#define LDO2_LPSR_ON BIT(1)
+#define LDO2_SUSP_ON BIT(0)
+
+
+/* LDO_MODE3 register */
+#define LDO5_SNVS_ON BIT(7)
+#define LDO5_RUN_ON BIT(6)
+#define LDO5_LPSR_ON BIT(5)
+#define LDO5_SUSP_ON BIT(4)
+#define LDO4_SNVS_ON BIT(3)
+#define LDO4_RUN_ON BIT(2)
+#define LDO4_LPSR_ON BIT(1)
+#define LDO4_SUSP_ON BIT(0)
+
+/* LDO_MODE4 register */
+#define DVREF_SNVS_ON BIT(7)
+#define DVREF_RUN_ON BIT(6)
+#define DVREF_LPSR_ON BIT(5)
+#define DVREF_SUSP_ON BIT(4)
+#define LDO_LPSR_SNVS_ON BIT(3)
+#define LDO_LPSR_RUN_ON BIT(2)
+#define LDO_LPSR_LPSR_ON BIT(1)
+#define LDO_LPSR_SUSP_ON BIT(0)
+
+/* BD71815_REG_OUT32K bits */
+#define OUT32K_EN BIT(0)
+#define OUT32K_MODE BIT(1)
+#define OUT32K_MODE_CMOS BIT(1)
+#define OUT32K_MODE_OPEN_DRAIN 0
+
+/* BD71815_REG_BAT_STAT bits */
+#define BAT_DET BIT(5)
+#define BAT_DET_OFFSET 5
+#define BAT_DET_DONE BIT(4)
+#define VBAT_OV BIT(3)
+#define DBAT_DET BIT(0)
+
+/* BD71815_REG_VBUS_STAT bits */
+#define VBUS_DET BIT(0)
+
+#define BD71815_REG_RTC_START BD71815_REG_SEC
+#define BD71815_REG_RTC_ALM_START BD71815_REG_ALM0_SEC
+
+/* BD71815_REG_ALM0_MASK bits */
+#define A0_ONESEC BIT(7)
+
+/* BD71815_REG_INT_EN_00 bits */
+#define ALMALE BIT(0)
+
+/* BD71815_REG_INT_STAT_03 bits */
+#define DCIN_MON_DET BIT(1)
+#define DCIN_MON_RES BIT(0)
+#define POWERON_LONG BIT(2)
+#define POWERON_MID BIT(3)
+#define POWERON_SHORT BIT(4)
+#define POWERON_PRESS BIT(5)
+
+/* BD71805_REG_INT_STAT_08 bits */
+#define VBAT_MON_DET BIT(1)
+#define VBAT_MON_RES BIT(0)
+
+/* BD71805_REG_INT_STAT_11 bits */
+#define INT_STAT_11_VF_DET BIT(7)
+#define INT_STAT_11_VF_RES BIT(6)
+#define INT_STAT_11_VF125_DET BIT(5)
+#define INT_STAT_11_VF125_RES BIT(4)
+#define INT_STAT_11_OVTMP_DET BIT(3)
+#define INT_STAT_11_OVTMP_RES BIT(2)
+#define INT_STAT_11_LOTMP_DET BIT(1)
+#define INT_STAT_11_LOTMP_RES BIT(0)
+
+#define VBAT_MON_DET BIT(1)
+#define VBAT_MON_RES BIT(0)
+
+/* BD71815_REG_PWRCTRL bits */
+#define RESTARTEN BIT(0)
+
+/* BD71815_REG_GPO bits */
+#define READY_FORCE_LOW BIT(2)
+#define BD71815_GPIO_DRIVE_MASK BIT(4)
+#define BD71815_GPIO_OPEN_DRAIN 0
+#define BD71815_GPIO_CMOS BIT(4)
+
+/* BD71815 interrupt masks */
+enum {
+ BD71815_INT_EN_01_BUCKAST_MASK = 0x0F,
+ BD71815_INT_EN_02_DCINAST_MASK = 0x3E,
+ BD71815_INT_EN_03_DCINAST_MASK = 0x3F,
+ BD71815_INT_EN_04_VSYSAST_MASK = 0xCF,
+ BD71815_INT_EN_05_CHGAST_MASK = 0xFC,
+ BD71815_INT_EN_06_BATAST_MASK = 0xF3,
+ BD71815_INT_EN_07_BMONAST_MASK = 0xFE,
+ BD71815_INT_EN_08_BMONAST_MASK = 0x03,
+ BD71815_INT_EN_09_BMONAST_MASK = 0x07,
+ BD71815_INT_EN_10_BMONAST_MASK = 0x3F,
+ BD71815_INT_EN_11_TMPAST_MASK = 0xFF,
+ BD71815_INT_EN_12_ALMAST_MASK = 0x07,
+};
+/* BD71815 interrupt irqs */
+enum {
+ /* BUCK reg interrupts */
+ BD71815_INT_BUCK1_OCP,
+ BD71815_INT_BUCK2_OCP,
+ BD71815_INT_BUCK3_OCP,
+ BD71815_INT_BUCK4_OCP,
+ BD71815_INT_BUCK5_OCP,
+ BD71815_INT_LED_OVP,
+ BD71815_INT_LED_OCP,
+ BD71815_INT_LED_SCP,
+ /* DCIN1 interrupts */
+ BD71815_INT_DCIN_RMV,
+ BD71815_INT_CLPS_OUT,
+ BD71815_INT_CLPS_IN,
+ BD71815_INT_DCIN_OVP_RES,
+ BD71815_INT_DCIN_OVP_DET,
+ /* DCIN2 interrupts */
+ BD71815_INT_DCIN_MON_RES,
+ BD71815_INT_DCIN_MON_DET,
+ BD71815_INT_WDOG,
+ /* Vsys INT_STAT_04 */
+ BD71815_INT_VSYS_UV_RES,
+ BD71815_INT_VSYS_UV_DET,
+ BD71815_INT_VSYS_LOW_RES,
+ BD71815_INT_VSYS_LOW_DET,
+ BD71815_INT_VSYS_MON_RES,
+ BD71815_INT_VSYS_MON_DET,
+ /* Charger INT_STAT_05 */
+ BD71815_INT_CHG_WDG_TEMP,
+ BD71815_INT_CHG_WDG_TIME,
+ BD71815_INT_CHG_RECHARGE_RES,
+ BD71815_INT_CHG_RECHARGE_DET,
+ BD71815_INT_CHG_RANGED_TEMP_TRANSITION,
+ BD71815_INT_CHG_STATE_TRANSITION,
+ /* Battery INT_STAT_06 */
+ BD71815_INT_BAT_TEMP_NORMAL,
+ BD71815_INT_BAT_TEMP_ERANGE,
+ BD71815_INT_BAT_REMOVED,
+ BD71815_INT_BAT_DETECTED,
+ BD71815_INT_THERM_REMOVED,
+ BD71815_INT_THERM_DETECTED,
+ /* Battery Mon 1 INT_STAT_07 */
+ BD71815_INT_BAT_DEAD,
+ BD71815_INT_BAT_SHORTC_RES,
+ BD71815_INT_BAT_SHORTC_DET,
+ BD71815_INT_BAT_LOW_VOLT_RES,
+ BD71815_INT_BAT_LOW_VOLT_DET,
+ BD71815_INT_BAT_OVER_VOLT_RES,
+ BD71815_INT_BAT_OVER_VOLT_DET,
+ /* Battery Mon 2 INT_STAT_08 */
+ BD71815_INT_BAT_MON_RES,
+ BD71815_INT_BAT_MON_DET,
+ /* Battery Mon 3 (Coulomb counter) INT_STAT_09 */
+ BD71815_INT_BAT_CC_MON1,
+ BD71815_INT_BAT_CC_MON2,
+ BD71815_INT_BAT_CC_MON3,
+ /* Battery Mon 4 INT_STAT_10 */
+ BD71815_INT_BAT_OVER_CURR_1_RES,
+ BD71815_INT_BAT_OVER_CURR_1_DET,
+ BD71815_INT_BAT_OVER_CURR_2_RES,
+ BD71815_INT_BAT_OVER_CURR_2_DET,
+ BD71815_INT_BAT_OVER_CURR_3_RES,
+ BD71815_INT_BAT_OVER_CURR_3_DET,
+ /* Temperature INT_STAT_11 */
+ BD71815_INT_TEMP_BAT_LOW_RES,
+ BD71815_INT_TEMP_BAT_LOW_DET,
+ BD71815_INT_TEMP_BAT_HI_RES,
+ BD71815_INT_TEMP_BAT_HI_DET,
+ BD71815_INT_TEMP_CHIP_OVER_125_RES,
+ BD71815_INT_TEMP_CHIP_OVER_125_DET,
+ BD71815_INT_TEMP_CHIP_OVER_VF_RES,
+ BD71815_INT_TEMP_CHIP_OVER_VF_DET,
+ /* RTC Alarm INT_STAT_12 */
+ BD71815_INT_RTC0,
+ BD71815_INT_RTC1,
+ BD71815_INT_RTC2,
+};
+
+#define BD71815_INT_BUCK1_OCP_MASK BIT(0)
+#define BD71815_INT_BUCK2_OCP_MASK BIT(1)
+#define BD71815_INT_BUCK3_OCP_MASK BIT(2)
+#define BD71815_INT_BUCK4_OCP_MASK BIT(3)
+#define BD71815_INT_BUCK5_OCP_MASK BIT(4)
+#define BD71815_INT_LED_OVP_MASK BIT(5)
+#define BD71815_INT_LED_OCP_MASK BIT(6)
+#define BD71815_INT_LED_SCP_MASK BIT(7)
+
+#define BD71815_INT_DCIN_RMV_MASK BIT(1)
+#define BD71815_INT_CLPS_OUT_MASK BIT(2)
+#define BD71815_INT_CLPS_IN_MASK BIT(3)
+#define BD71815_INT_DCIN_OVP_RES_MASK BIT(4)
+#define BD71815_INT_DCIN_OVP_DET_MASK BIT(5)
+
+#define BD71815_INT_DCIN_MON_RES_MASK BIT(0)
+#define BD71815_INT_DCIN_MON_DET_MASK BIT(1)
+#define BD71815_INT_WDOG_MASK BIT(6)
+
+#define BD71815_INT_VSYS_UV_RES_MASK BIT(0)
+#define BD71815_INT_VSYS_UV_DET_MASK BIT(1)
+#define BD71815_INT_VSYS_LOW_RES_MASK BIT(2)
+#define BD71815_INT_VSYS_LOW_DET_MASK BIT(3)
+#define BD71815_INT_VSYS_MON_RES_MASK BIT(6)
+#define BD71815_INT_VSYS_MON_DET_MASK BIT(7)
+
+#define BD71815_INT_CHG_WDG_TEMP_MASK BIT(2)
+#define BD71815_INT_CHG_WDG_TIME_MASK BIT(3)
+#define BD71815_INT_CHG_RECHARGE_RES_MASK BIT(4)
+#define BD71815_INT_CHG_RECHARGE_DET_MASK BIT(5)
+#define BD71815_INT_CHG_RANGED_TEMP_TRANSITION_MASK BIT(6)
+#define BD71815_INT_CHG_STATE_TRANSITION_MASK BIT(7)
+
+#define BD71815_INT_BAT_TEMP_NORMAL_MASK BIT(0)
+#define BD71815_INT_BAT_TEMP_ERANGE_MASK BIT(1)
+#define BD71815_INT_BAT_REMOVED_MASK BIT(4)
+#define BD71815_INT_BAT_DETECTED_MASK BIT(5)
+#define BD71815_INT_THERM_REMOVED_MASK BIT(6)
+#define BD71815_INT_THERM_DETECTED_MASK BIT(7)
+
+#define BD71815_INT_BAT_DEAD_MASK BIT(1)
+#define BD71815_INT_BAT_SHORTC_RES_MASK BIT(2)
+#define BD71815_INT_BAT_SHORTC_DET_MASK BIT(3)
+#define BD71815_INT_BAT_LOW_VOLT_RES_MASK BIT(4)
+#define BD71815_INT_BAT_LOW_VOLT_DET_MASK BIT(5)
+#define BD71815_INT_BAT_OVER_VOLT_RES_MASK BIT(6)
+#define BD71815_INT_BAT_OVER_VOLT_DET_MASK BIT(7)
+
+#define BD71815_INT_BAT_MON_RES_MASK BIT(0)
+#define BD71815_INT_BAT_MON_DET_MASK BIT(1)
+
+#define BD71815_INT_BAT_CC_MON1_MASK BIT(0)
+#define BD71815_INT_BAT_CC_MON2_MASK BIT(1)
+#define BD71815_INT_BAT_CC_MON3_MASK BIT(2)
+
+#define BD71815_INT_BAT_OVER_CURR_1_RES_MASK BIT(0)
+#define BD71815_INT_BAT_OVER_CURR_1_DET_MASK BIT(1)
+#define BD71815_INT_BAT_OVER_CURR_2_RES_MASK BIT(2)
+#define BD71815_INT_BAT_OVER_CURR_2_DET_MASK BIT(3)
+#define BD71815_INT_BAT_OVER_CURR_3_RES_MASK BIT(4)
+#define BD71815_INT_BAT_OVER_CURR_3_DET_MASK BIT(5)
+
+#define BD71815_INT_TEMP_BAT_LOW_RES_MASK BIT(0)
+#define BD71815_INT_TEMP_BAT_LOW_DET_MASK BIT(1)
+#define BD71815_INT_TEMP_BAT_HI_RES_MASK BIT(2)
+#define BD71815_INT_TEMP_BAT_HI_DET_MASK BIT(3)
+#define BD71815_INT_TEMP_CHIP_OVER_125_RES_MASK BIT(4)
+#define BD71815_INT_TEMP_CHIP_OVER_125_DET_MASK BIT(5)
+#define BD71815_INT_TEMP_CHIP_OVER_VF_RES_MASK BIT(6)
+#define BD71815_INT_TEMP_CHIP_OVER_VF_DET_MASK BIT(7)
+
+#define BD71815_INT_RTC0_MASK BIT(0)
+#define BD71815_INT_RTC1_MASK BIT(1)
+#define BD71815_INT_RTC2_MASK BIT(2)
+
+/* BD71815_REG_CC_CTRL bits */
+#define CCNTRST 0x80
+#define CCNTENB 0x40
+#define CCCALIB 0x20
+
+/* BD71815_REG_CC_CURCD */
+#define CURDIR_Discharging 0x8000
+
+/* BD71815_REG_VM_SA_IBAT */
+#define IBAT_SA_DIR_Discharging 0x8000
+
+/* BD71815_REG_REX_CTRL_1 bits */
+#define REX_CLR BIT(4)
+
+/* BD71815_REG_REX_CTRL_1 bits */
+#define REX_PMU_STATE_MASK BIT(2)
+
+/* BD71815_REG_LED_CTRL bits */
+#define CHGDONE_LED_EN BIT(4)
+
+#endif /* __LINUX_MFD_BD71815_H */
diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
index 017a4c01cb31..c7ab69c87ee8 100644
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -151,6 +151,9 @@ enum {
#define BD71828_REG_GPIO_CTRL3 0x49
#define BD71828_REG_IO_STAT 0xed
+/* clk */
+#define BD71828_REG_OUT32K 0x4b
+
/* RTC */
#define BD71828_REG_RTC_SEC 0x4c
#define BD71828_REG_RTC_MINUTE 0x4d
diff --git a/include/linux/mfd/rohm-bd718x7.h b/include/linux/mfd/rohm-bd718x7.h
index bee2474a8f9f..df2918198d37 100644
--- a/include/linux/mfd/rohm-bd718x7.h
+++ b/include/linux/mfd/rohm-bd718x7.h
@@ -310,17 +310,4 @@ enum {
BD718XX_PWRBTN_LONG_PRESS_15S
};
-struct bd718xx {
- /*
- * Please keep this as the first member here as some
- * drivers (clk) supporting more than one chip may only know this
- * generic struct 'struct rohm_regmap_dev' and assume it is
- * the first chunk of parent device's private data.
- */
- struct rohm_regmap_dev chip;
-
- int chip_irq;
- struct regmap_irq_chip_data *irq_data;
-};
-
#endif /* __LINUX_MFD_BD718XX_H__ */
diff --git a/include/linux/mfd/rohm-bd957x.h b/include/linux/mfd/rohm-bd957x.h
new file mode 100644
index 000000000000..acc920b64f75
--- /dev/null
+++ b/include/linux/mfd/rohm-bd957x.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2021 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD957X_H__
+#define __LINUX_MFD_BD957X_H__
+
+enum {
+ BD957X_VD50,
+ BD957X_VD18,
+ BD957X_VDDDR,
+ BD957X_VD10,
+ BD957X_VOUTL1,
+ BD957X_VOUTS1,
+};
+
+/*
+ * The BD9576 has own IRQ 'blocks' for:
+ * - I2C/thermal,
+ * - Over voltage protection
+ * - Short-circuit protection
+ * - Over current protection
+ * - Over voltage detection
+ * - Under voltage detection
+ * - Under voltage protection
+ * - 'system interrupt'.
+ *
+ * Each of the blocks have a status register giving more accurate IRQ source
+ * information - for example which of the regulators have over-voltage.
+ *
+ * On top of this, there is "main IRQ" status register where each bit indicates
+ * which of sub-blocks have active IRQs. Fine. That would fit regmap-irq main
+ * status handling. Except that:
+ * - Only some sub-IRQs can be masked.
+ * - The IRQ informs us about fault-condition, not when fault state changes.
+ * The IRQ line it is kept asserted until the detected condition is acked
+ * AND cleared in HW. This is annoying for IRQs like the one informing high
+ * temperature because if IRQ is not disabled it keeps the CPU in IRQ
+ * handling loop.
+ *
+ * For now we do just use the main-IRQ register as source for our IRQ
+ * information and bind the regmap-irq to this. We leave fine-grained sub-IRQ
+ * register handling to handlers in sub-devices. The regulator driver shall
+ * read which regulators are source for problem - or if the detected error is
+ * regulator temperature error. The sub-drivers do also handle masking of "sub-
+ * IRQs" if this is supported/needed.
+ *
+ * To overcome the problem with HW keeping IRQ asserted we do call
+ * disable_irq_nosync() from sub-device handler and add a delayed work to
+ * re-enable IRQ roughly 1 second later. This should keep our CPU out of
+ * busy-loop.
+ */
+#define IRQS_SILENT_MS 1000
+
+enum {
+ BD9576_INT_THERM,
+ BD9576_INT_OVP,
+ BD9576_INT_SCP,
+ BD9576_INT_OCP,
+ BD9576_INT_OVD,
+ BD9576_INT_UVD,
+ BD9576_INT_UVP,
+ BD9576_INT_SYS,
+};
+
+#define BD957X_REG_SMRB_ASSERT 0x15
+#define BD957X_REG_PMIC_INTERNAL_STAT 0x20
+#define BD957X_REG_INT_THERM_STAT 0x23
+#define BD957X_REG_INT_THERM_MASK 0x24
+#define BD957X_REG_INT_OVP_STAT 0x25
+#define BD957X_REG_INT_SCP_STAT 0x26
+#define BD957X_REG_INT_OCP_STAT 0x27
+#define BD957X_REG_INT_OVD_STAT 0x28
+#define BD957X_REG_INT_UVD_STAT 0x29
+#define BD957X_REG_INT_UVP_STAT 0x2a
+#define BD957X_REG_INT_SYS_STAT 0x2b
+#define BD957X_REG_INT_SYS_MASK 0x2c
+#define BD957X_REG_INT_MAIN_STAT 0x30
+#define BD957X_REG_INT_MAIN_MASK 0x31
+
+#define UVD_IRQ_VALID_MASK 0x6F
+#define OVD_IRQ_VALID_MASK 0x2F
+
+#define BD957X_MASK_INT_MAIN_THERM BIT(0)
+#define BD957X_MASK_INT_MAIN_OVP BIT(1)
+#define BD957X_MASK_INT_MAIN_SCP BIT(2)
+#define BD957X_MASK_INT_MAIN_OCP BIT(3)
+#define BD957X_MASK_INT_MAIN_OVD BIT(4)
+#define BD957X_MASK_INT_MAIN_UVD BIT(5)
+#define BD957X_MASK_INT_MAIN_UVP BIT(6)
+#define BD957X_MASK_INT_MAIN_SYS BIT(7)
+#define BD957X_MASK_INT_ALL 0xff
+
+#define BD957X_REG_WDT_CONF 0x16
+
+#define BD957X_REG_POW_TRIGGER1 0x41
+#define BD957X_REG_POW_TRIGGER2 0x42
+#define BD957X_REG_POW_TRIGGER3 0x43
+#define BD957X_REG_POW_TRIGGER4 0x44
+#define BD957X_REG_POW_TRIGGERL1 0x45
+#define BD957X_REG_POW_TRIGGERS1 0x46
+
+#define BD957X_REGULATOR_EN_MASK 0xff
+#define BD957X_REGULATOR_DIS_VAL 0xff
+
+#define BD957X_VSEL_REG_MASK 0xff
+
+#define BD957X_MASK_VOUT1_TUNE 0x87
+#define BD957X_MASK_VOUT2_TUNE 0x87
+#define BD957X_MASK_VOUT3_TUNE 0x1f
+#define BD957X_MASK_VOUT4_TUNE 0x1f
+#define BD957X_MASK_VOUTL1_TUNE 0x87
+
+#define BD957X_REG_VOUT1_TUNE 0x50
+#define BD957X_REG_VOUT2_TUNE 0x53
+#define BD957X_REG_VOUT3_TUNE 0x56
+#define BD957X_REG_VOUT4_TUNE 0x59
+#define BD957X_REG_VOUTL1_TUNE 0x5c
+
+#define BD9576_REG_VOUT1_OVD 0x51
+#define BD9576_REG_VOUT1_UVD 0x52
+#define BD9576_REG_VOUT2_OVD 0x54
+#define BD9576_REG_VOUT2_UVD 0x55
+#define BD9576_REG_VOUT3_OVD 0x57
+#define BD9576_REG_VOUT3_UVD 0x58
+#define BD9576_REG_VOUT4_OVD 0x5a
+#define BD9576_REG_VOUT4_UVD 0x5b
+#define BD9576_REG_VOUTL1_OVD 0x5d
+#define BD9576_REG_VOUTL1_UVD 0x5e
+
+#define BD9576_MASK_XVD 0x7f
+
+#define BD9576_REG_VOUT1S_OCW 0x5f
+#define BD9576_REG_VOUT1S_OCP 0x60
+
+#define BD9576_MASK_VOUT1S_OCW 0x3f
+#define BD9576_MASK_VOUT1S_OCP 0x3f
+
+#define BD957X_MAX_REGISTER 0x61
+
+#endif
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 66f673c35303..35b392a0d73a 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -8,12 +8,15 @@
#include <linux/regulator/driver.h>
enum rohm_chip_type {
- ROHM_CHIP_TYPE_BD71837 = 0,
- ROHM_CHIP_TYPE_BD71847,
- ROHM_CHIP_TYPE_BD70528,
- ROHM_CHIP_TYPE_BD71828,
ROHM_CHIP_TYPE_BD9571,
+ ROHM_CHIP_TYPE_BD9573,
ROHM_CHIP_TYPE_BD9574,
+ ROHM_CHIP_TYPE_BD9576,
+ ROHM_CHIP_TYPE_BD70528,
+ ROHM_CHIP_TYPE_BD71815,
+ ROHM_CHIP_TYPE_BD71828,
+ ROHM_CHIP_TYPE_BD71837,
+ ROHM_CHIP_TYPE_BD71847,
ROHM_CHIP_TYPE_AMOUNT
};
@@ -26,7 +29,8 @@ struct rohm_regmap_dev {
#define ROHM_DVS_LEVEL_IDLE BIT(1)
#define ROHM_DVS_LEVEL_SUSPEND BIT(2)
#define ROHM_DVS_LEVEL_LPSR BIT(3)
-#define ROHM_DVS_LEVEL_VALID_AMOUNT 4
+#define ROHM_DVS_LEVEL_SNVS BIT(4)
+#define ROHM_DVS_LEVEL_VALID_AMOUNT 5
#define ROHM_DVS_LEVEL_UNKNOWN 0
/**
@@ -65,6 +69,9 @@ struct rohm_dvs_config {
unsigned int lpsr_reg;
unsigned int lpsr_mask;
unsigned int lpsr_on_mask;
+ unsigned int snvs_reg;
+ unsigned int snvs_mask;
+ unsigned int snvs_on_mask;
};
#if IS_ENABLED(CONFIG_REGULATOR_ROHM)
diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h
index 089e8942223a..8871cc5188a0 100644
--- a/include/linux/mfd/twl.h
+++ b/include/linux/mfd/twl.h
@@ -781,8 +781,6 @@ int twl4030_sih_setup(struct device *dev, int module, int irq_base);
#define TWL4030_VAUX3_DEV_GRP 0x1F
#define TWL4030_VAUX3_DEDICATED 0x22
-static inline int twl4030charger_usb_en(int enable) { return 0; }
-
/*----------------------------------------------------------------------*/
/* Linux-specific regulator identifiers ... for now, we only support
diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h
deleted file mode 100644
index 014c4a5a7e13..000000000000
--- a/include/linux/platform_data/i2c-designware.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2014 Intel Corporation.
- */
-
-#ifndef I2C_DESIGNWARE_H
-#define I2C_DESIGNWARE_H
-
-struct dw_i2c_platform_data {
- unsigned int i2c_scl_freq;
-};
-
-#endif
diff --git a/drivers/extcon/extcon-arizona.c b/sound/soc/codecs/arizona-jack.c
index aae82db542a5..56d2ce05de50 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/sound/soc/codecs/arizona-jack.c
@@ -290,7 +290,7 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
unsigned int mode;
/* Microphone detection can't use idle mode */
- pm_runtime_get(info->dev);
+ pm_runtime_get_sync(info->dev);
if (info->detecting) {
ret = regulator_allow_bypass(info->micvdd, false);
@@ -601,7 +601,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
unsigned int report = EXTCON_JACK_HEADPHONE;
- int ret, reading;
+ int ret, reading, state;
bool mic = false;
mutex_lock(&info->lock);
@@ -614,12 +614,11 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
}
/* If the cable was removed while measuring ignore the result */
- ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
- if (ret < 0) {
- dev_err(arizona->dev, "Failed to check cable state: %d\n",
- ret);
+ state = extcon_get_state(info->edev, EXTCON_MECHANICAL);
+ if (state < 0) {
+ dev_err(arizona->dev, "Failed to check cable state: %d\n", state);
goto out;
- } else if (!ret) {
+ } else if (!state) {
dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n");
goto done;
}
@@ -667,7 +666,7 @@ done:
gpio_set_value_cansleep(id_gpio, 0);
/* If we have a mic then reenable MICDET */
- if (mic || info->mic)
+ if (state && (mic || info->mic))
arizona_start_mic(info);
if (info->hpdet_active) {
@@ -675,7 +674,9 @@ done:
info->hpdet_active = false;
}
- info->hpdet_done = true;
+ /* Do not set hp_det done when the cable has been unplugged */
+ if (state)
+ info->hpdet_done = true;
out:
mutex_unlock(&info->lock);
@@ -694,7 +695,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
dev_dbg(arizona->dev, "Starting HPDET\n");
/* Make sure we keep the device enabled during the measurement */
- pm_runtime_get(info->dev);
+ pm_runtime_get_sync(info->dev);
info->hpdet_active = true;
@@ -1509,7 +1510,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
*/
info->micd_pol_gpio = gpiod_get_optional(arizona->dev,
"wlf,micd-pol",
- GPIOD_OUT_LOW);
+ mode);
if (IS_ERR(info->micd_pol_gpio)) {
ret = PTR_ERR(info->micd_pol_gpio);
dev_err(arizona->dev,
@@ -1759,25 +1760,6 @@ static int arizona_extcon_remove(struct platform_device *pdev)
bool change;
int ret;
- ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
- ARIZONA_MICD_ENA, 0,
- &change);
- if (ret < 0) {
- dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
- ret);
- } else if (change) {
- regulator_disable(info->micvdd);
- pm_runtime_put(info->dev);
- }
-
- gpiod_put(info->micd_pol_gpio);
-
- pm_runtime_disable(&pdev->dev);
-
- regmap_update_bits(arizona->regmap,
- ARIZONA_MICD_CLAMP_CONTROL,
- ARIZONA_MICD_CLAMP_MODE_MASK, 0);
-
if (info->micd_clamp) {
jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE;
jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL;
@@ -1793,10 +1775,31 @@ static int arizona_extcon_remove(struct platform_device *pdev)
arizona_free_irq(arizona, jack_irq_rise, info);
arizona_free_irq(arizona, jack_irq_fall, info);
cancel_delayed_work_sync(&info->hpdet_work);
+ cancel_delayed_work_sync(&info->micd_detect_work);
+ cancel_delayed_work_sync(&info->micd_timeout_work);
+
+ ret = regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1,
+ ARIZONA_MICD_ENA, 0,
+ &change);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to disable micd on remove: %d\n",
+ ret);
+ } else if (change) {
+ regulator_disable(info->micvdd);
+ pm_runtime_put(info->dev);
+ }
+
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_MICD_CLAMP_CONTROL,
+ ARIZONA_MICD_CLAMP_MODE_MASK, 0);
regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE,
ARIZONA_JD1_ENA, 0);
arizona_clk32k_disable(arizona);
+ gpiod_put(info->micd_pol_gpio);
+
+ pm_runtime_disable(&pdev->dev);
+
return 0;
}