diff options
69 files changed, 6574 insertions, 1495 deletions
diff --git a/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml b/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml new file mode 100644 index 000000000000..948839499235 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/allwinner,suniv-f1c100s-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner F1C100s USB PHY + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#phy-cells": + const: 1 + + compatible: + const: allwinner,suniv-f1c100s-usb-phy + + reg: + maxItems: 1 + description: PHY Control registers + + reg-names: + const: phy_ctrl + + clocks: + maxItems: 1 + description: USB OTG PHY bus clock + + clock-names: + const: usb0_phy + + resets: + maxItems: 1 + description: USB OTG reset + + reset-names: + const: usb0_reset + + usb0_id_det-gpios: + maxItems: 1 + description: GPIO to the USB OTG ID pin + + usb0_vbus_det-gpios: + maxItems: 1 + description: GPIO to the USB OTG VBUS detect pin + + usb0_vbus_power-supply: + description: Power supply to detect the USB OTG VBUS + + usb0_vbus-supply: + description: Regulator controlling USB OTG VBUS + +required: + - "#phy-cells" + - compatible + - clocks + - clock-names + - reg + - reg-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/suniv-ccu-f1c100s.h> + #include <dt-bindings/reset/suniv-ccu-f1c100s.h> + + phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml index 129d26e99776..3314711292d6 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml @@ -35,6 +35,11 @@ properties: "#phy-cells": const: 1 + phy-supply: + description: + Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-gxl-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-gxl-usb2-phy.yaml new file mode 100644 index 000000000000..c2f5c9d2fce6 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-gxl-usb2-phy.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/amlogic,meson-gxl-usb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Meson GXL USB2 PHY + +maintainers: + - Neil Armstrong <neil.armstrong@linaro.org> + +properties: + compatible: + const: amlogic,meson-gxl-usb2-phy + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: phy + + resets: + maxItems: 1 + + reset-names: + items: + - const: phy + + "#phy-cells": + const: 0 + + phy-supply: true + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@78000 { + compatible = "amlogic,meson-gxl-usb2-phy"; + reg = <0x78000 0x20>; + clocks = <&xtal>; + clock-names = "phy"; + resets = <&phy_reset>; + reset-names = "phy"; + #phy-cells = <0>; + phy-supply = <&usb2_supply>; + }; diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 5613cc5106e3..230a17f24966 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -79,6 +79,7 @@ properties: - enum: - mediatek,mt2712-tphy - mediatek,mt7629-tphy + - mediatek,mt7986-tphy - mediatek,mt8183-tphy - mediatek,mt8186-tphy - mediatek,mt8192-tphy diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt deleted file mode 100644 index b84a02ebffdf..000000000000 --- a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt +++ /dev/null @@ -1,21 +0,0 @@ -* Amlogic Meson GXL and GXM USB2 PHY binding - -Required properties: -- compatible: Should be "amlogic,meson-gxl-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: must be 0 (see phy-bindings.txt in this directory) - -Optional properties: -- clocks: a phandle to the clock of this PHY -- clock-names: must be "phy" -- resets: a phandle to the reset line of this PHY -- reset-names: must be "phy" -- phy-supply: see phy-bindings.txt in this directory - - -Example: - usb2_phy0: phy@78000 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78000 0x0 0x20>; - }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt deleted file mode 100644 index b62397d2bb0c..000000000000 --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt +++ /dev/null @@ -1,779 +0,0 @@ -Device tree binding for NVIDIA Tegra XUSB pad controller -======================================================== - -The Tegra XUSB pad controller manages a set of I/O lanes (with differential -signals) which connect directly to pins/pads on the SoC package. Each lane -is controlled by a HW block referred to as a "pad" in the Tegra hardware -documentation. Each such "pad" may control either one or multiple lanes, -and thus contains any logic common to all its lanes. Each lane can be -separately configured and powered up. - -Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or -super-speed USB. Other lanes are for various types of low-speed, full-speed -or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller -contains a software-configurable mux that sits between the I/O controller -ports (e.g. PCIe) and the lanes. - -In addition to per-lane configuration, USB 3.0 ports may require additional -settings on a per-board basis. - -Pads will be represented as children of the top-level XUSB pad controller -device tree node. Each lane exposed by the pad will be represented by its -own subnode and can be referenced by users of the lane using the standard -PHY bindings, as described by the phy-bindings.txt file in this directory. - -The Tegra hardware documentation refers to the connection between the XUSB -pad controller and the XUSB controller as "ports". This is confusing since -"port" is typically used to denote the physical USB receptacle. The device -tree binding in this document uses the term "port" to refer to the logical -abstraction of the signals that are routed to a USB receptacle (i.e. a PHY -for the USB signal, the VBUS power supply, the USB 2.0 companion port for -USB 3.0 receptacles, ...). - -Required properties: --------------------- -- compatible: Must be: - - Tegra124: "nvidia,tegra124-xusb-padctl" - - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" - - Tegra210: "nvidia,tegra210-xusb-padctl" - - Tegra186: "nvidia,tegra186-xusb-padctl" - - Tegra194: "nvidia,tegra194-xusb-padctl" -- reg: Physical base address and length of the controller's registers. -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must include the following entries: - - "padctl" - -For Tegra124: -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-erefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- avdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 3.3 V. - -For Tegra210: -- avdd-pll-utmip-supply: UTMI PLL power supply. Must supply 1.8 V. -- avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V. -- dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V. -- hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V. -- nvidia,pmc: phandle and specifier referring to the Tegra210 PMC node. - -For Tegra186: -- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY - power supply. Must supply 1.8 V. -- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply - 3.3 V. -- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. -- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. - -For Tegra194: -- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply - 3.3 V. -- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. - -Pad nodes: -========== - -A required child node named "pads" contains a list of subnodes, one for each -of the pads exposed by the XUSB pad controller. Each pad may need additional -resources that can be referenced in its pad node. - -The "status" property is used to enable or disable the use of a pad. If set -to "disabled", the pad will not be used on the given board. In order to use -the pad and any of its lanes, this property must be set to "okay". - -For Tegra124 and Tegra132, the following pads exist: usb2, ulpi, hsic, pcie -and sata. No extra resources are required for operation of these pads. - -For Tegra210, the following pads exist: usb2, hsic, pcie and sata. Below is -a description of the properties of each pad. - -UTMI pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "trk": phandle and specifier referring to the USB2 tracking clock - -HSIC pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "trk": phandle and specifier referring to the HSIC tracking clock - -PCIe pad: ---------- - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. -- clock-names: Must contain the following entries: - - "pll": phandle and specifier referring to the PLLE -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must contain the following entries: - - "phy": reset for the PCIe UPHY block - -SATA pad: ---------- - -Required properties: -- resets: Must contain an entry for each entry in reset-names. -- reset-names: Must contain the following entries: - - "phy": reset for the SATA UPHY block - - -PHY nodes: -========== - -Each pad node has a child named "lanes" that contains one or more children of -its own, each representing one of the lanes controlled by the pad. - -Required properties: --------------------- -- status: Defines the operation status of the PHY. Valid values are: - - "disabled": the PHY is disabled - - "okay": the PHY is enabled -- #phy-cells: Should be 0. Since each lane represents a single PHY, there is - no need for an additional specifier. -- nvidia,function: The output function of the PHY. See below for a list of - valid functions per SoC generation. - -For Tegra124 and Tegra132, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2 - - functions: "snps", "xusb", "uart" -- ulpi: ulpi-0 - - functions: "snps", "xusb" -- hsic: hsic-0, hsic-1 - - functions: "snps", "xusb" -- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4 - - functions: "pcie", "usb3-ss" -- sata: sata-0 - - functions: "usb3-ss", "sata" - -For Tegra210, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - - functions: "snps", "xusb", "uart" -- hsic: hsic-0, hsic-1 - - functions: "snps", "xusb" -- pcie: pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, pcie-5, pcie-6 - - functions: "pcie-x1", "usb3-ss", "pcie-x4" -- sata: sata-0 - - functions: "usb3-ss", "sata" - -For Tegra194, the list of valid PHY nodes is given below: -- usb2: usb2-0, usb2-1, usb2-2, usb2-3 - - functions: "xusb" -- usb3: usb3-0, usb3-1, usb3-2, usb3-3 - - functions: "xusb" - -Port nodes: -=========== - -A required child node named "ports" contains a list of all the ports exposed -by the XUSB pad controller. Per-port configuration is only required for USB. - -USB2 ports: ------------ - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- mode: A string that determines the mode in which to run the port. Valid - values are: - - "host": for USB host mode - - "device": for USB device mode - - "otg": for USB OTG mode - -Required properties for OTG/Peripheral capable USB2 ports: -- usb-role-switch: Boolean property to indicate that the port support OTG or - peripheral mode. If present, the port supports switching between USB host - and peripheral roles. Connector should be added as subnode. - See usb/usb-conn-gpio.txt. - -Optional properties: -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -ULPI ports: ------------ - -Optional properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -HSIC ports: ------------ - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled - -Optional properties: -- vbus-supply: phandle to a regulator supplying the VBUS voltage. - -Super-speed USB ports: ----------------------- - -Required properties: -- status: Defines the operation status of the port. Valid values are: - - "disabled": the port is disabled - - "okay": the port is enabled -- nvidia,usb2-companion: A single cell that specifies the physical port number - to map this super-speed USB port to. The range of valid port numbers varies - with the SoC generation: - - 0-2: for Tegra124 and Tegra132 - - 0-3: for Tegra210 - -Optional properties: -- nvidia,internal: A boolean property whose presence determines that a port - is internal. In the absence of this property the port is considered to be - external. - -- maximum-speed: Only for Tegra194. A string property that specifies maximum - supported speed of a usb3 port. Valid values are: - - "super-speed-plus": default, the usb3 port supports USB 3.1 Gen 2 speed. - - "super-speed": the usb3 port supports USB 3.1 Gen 1 speed only. - -For Tegra124 and Tegra132, the XUSB pad controller exposes the following -ports: -- 3x USB2: usb2-0, usb2-1, usb2-2 -- 1x ULPI: ulpi-0 -- 2x HSIC: hsic-0, hsic-1 -- 2x super-speed USB: usb3-0, usb3-1 - -For Tegra210, the XUSB pad controller exposes the following ports: -- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 -- 2x HSIC: hsic-0, hsic-1 -- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 - -For Tegra194, the XUSB pad controller exposes the following ports: -- 4x USB2: usb2-0, usb2-1, usb2-2, usb2-3 -- 4x super-speed USB: usb3-0, usb3-1, usb3-2, usb3-3 - -Examples: -========= - -Tegra124 and Tegra132: ----------------------- - -SoC include: - - padctl@7009f000 { - /* for Tegra124 */ - compatible = "nvidia,tegra124-xusb-padctl"; - /* for Tegra132 */ - compatible = "nvidia,tegra132-xusb-padctl", - "nvidia,tegra124-xusb-padctl"; - reg = <0x0 0x7009f000 0x0 0x1000>; - resets = <&tegra_car 142>; - reset-names = "padctl"; - - pads { - usb2 { - status = "disabled"; - - lanes { - usb2-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-2 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - ulpi { - status = "disabled"; - - lanes { - ulpi-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - hsic { - status = "disabled"; - - lanes { - hsic-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - hsic-1 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - pcie { - status = "disabled"; - - lanes { - pcie-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-3 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-4 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - sata { - status = "disabled"; - - lanes { - sata-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "disabled"; - }; - - usb2-1 { - status = "disabled"; - }; - - usb2-2 { - status = "disabled"; - }; - - ulpi-0 { - status = "disabled"; - }; - - hsic-0 { - status = "disabled"; - }; - - hsic-1 { - status = "disabled"; - }; - - usb3-0 { - status = "disabled"; - }; - - usb3-1 { - status = "disabled"; - }; - }; - }; - -Board file: - - padctl@7009f000 { - status = "okay"; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-2 { - nvidia,function = "pcie"; - status = "okay"; - }; - - pcie-4 { - nvidia,function = "pcie"; - status = "okay"; - }; - }; - }; - - sata { - status = "okay"; - - lanes { - sata-0 { - nvidia,function = "sata"; - status = "okay"; - }; - }; - }; - }; - - ports { - /* Micro A/B */ - usb2-0 { - status = "okay"; - mode = "otg"; - }; - - /* Mini PCIe */ - usb2-1 { - status = "okay"; - mode = "host"; - }; - - /* USB3 */ - usb2-2 { - status = "okay"; - mode = "host"; - - vbus-supply = <&vdd_usb3_vbus>; - }; - - usb3-0 { - nvidia,port = <2>; - status = "okay"; - }; - }; - }; - -Tegra210: ---------- - -SoC include: - - padctl@7009f000 { - compatible = "nvidia,tegra210-xusb-padctl"; - reg = <0x0 0x7009f000 0x0 0x1000>; - resets = <&tegra_car 142>; - reset-names = "padctl"; - - status = "disabled"; - - pads { - usb2 { - clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; - clock-names = "trk"; - status = "disabled"; - - lanes { - usb2-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - usb2-3 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - hsic { - clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; - clock-names = "trk"; - status = "disabled"; - - lanes { - hsic-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - hsic-1 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - pcie { - clocks = <&tegra_car TEGRA210_CLK_PLL_E>; - clock-names = "pll"; - resets = <&tegra_car 205>; - reset-names = "phy"; - status = "disabled"; - - lanes { - pcie-0 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-1 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-2 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-3 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-4 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-5 { - status = "disabled"; - #phy-cells = <0>; - }; - - pcie-6 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - - sata { - clocks = <&tegra_car TEGRA210_CLK_PLL_E>; - clock-names = "pll"; - resets = <&tegra_car 204>; - reset-names = "phy"; - status = "disabled"; - - lanes { - sata-0 { - status = "disabled"; - #phy-cells = <0>; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "disabled"; - }; - - usb2-1 { - status = "disabled"; - }; - - usb2-2 { - status = "disabled"; - }; - - usb2-3 { - status = "disabled"; - }; - - hsic-0 { - status = "disabled"; - }; - - hsic-1 { - status = "disabled"; - }; - - usb3-0 { - status = "disabled"; - }; - - usb3-1 { - status = "disabled"; - }; - - usb3-2 { - status = "disabled"; - }; - - usb3-3 { - status = "disabled"; - }; - }; - }; - -Board file: - - padctl@7009f000 { - status = "okay"; - - pads { - usb2 { - status = "okay"; - - lanes { - usb2-0 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-1 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-2 { - nvidia,function = "xusb"; - status = "okay"; - }; - - usb2-3 { - nvidia,function = "xusb"; - status = "okay"; - }; - }; - }; - - pcie { - status = "okay"; - - lanes { - pcie-0 { - nvidia,function = "pcie-x1"; - status = "okay"; - }; - - pcie-1 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-2 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-3 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-4 { - nvidia,function = "pcie-x4"; - status = "okay"; - }; - - pcie-5 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - - pcie-6 { - nvidia,function = "usb3-ss"; - status = "okay"; - }; - }; - }; - - sata { - status = "okay"; - - lanes { - sata-0 { - nvidia,function = "sata"; - status = "okay"; - }; - }; - }; - }; - - ports { - usb2-0 { - status = "okay"; - mode = "otg"; - }; - - usb2-1 { - status = "okay"; - vbus-supply = <&vdd_5v0_rtl>; - mode = "host"; - }; - - usb2-2 { - status = "okay"; - vbus-supply = <&vdd_usb_vbus>; - mode = "host"; - }; - - usb2-3 { - status = "okay"; - mode = "host"; - }; - - usb3-0 { - status = "okay"; - nvidia,lanes = "pcie-6"; - nvidia,port = <1>; - }; - - usb3-1 { - status = "okay"; - nvidia,lanes = "pcie-5"; - nvidia,port = <2>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml new file mode 100644 index 000000000000..33b41b6b2fd5 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.yaml @@ -0,0 +1,654 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra124-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra124 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + oneOf: + - enum: + - nvidia,tegra124-xusb-padctl + + - items: + - const: nvidia,tegra132-xusb-padctl + - const: nvidia,tegra124-xusb-padctl + + reg: + maxItems: 1 + + interrupts: + items: + - description: XUSB pad controller interrupt + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-erefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + avdd-pex-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-pex-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 3.3 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + ulpi: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + ulpi-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + hsic-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + pcie: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: PLLE clock + + clock-names: + items: + - const: pll + + resets: + items: + - description: reset for the PCIe UPHY block + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + pcie-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + pcie-4: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie, usb3-ss ] + + sata: + type: object + additionalProperties: false + properties: + resets: + items: + - description: reset for the SATA UPHY block + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + sata-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ sata, usb3-ss ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + ulpi-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + hsic-0: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + hsic-1: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-pll-utmip-supply + - avdd-pll-erefe-supply + - avdd-pex-pll-supply + - hvdd-pex-pll-e-supply + +examples: + # Tegra124 and Tegra132 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + padctl@7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x7009f000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + + pads { + usb2 { + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + ulpi { + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + nvidia,function = "pcie"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + nvidia,function = "pcie"; + #phy-cells = <0>; + }; + }; + }; + + sata { + lanes { + sata-0 { + nvidia,function = "sata"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + /* Micro A/B */ + usb2-0 { + mode = "otg"; + }; + + /* Mini PCIe */ + usb2-1 { + mode = "host"; + }; + + /* USB3 */ + usb2-2 { + vbus-supply = <&vdd_usb3_vbus>; + mode = "host"; + }; + + ulpi-0 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + }; + + usb3-1 { + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra186-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra186-xusb-padctl.yaml new file mode 100644 index 000000000000..8b1d5a8529e3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra186-xusb-padctl.yaml @@ -0,0 +1,544 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra186 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + const: nvidia,tegra186-xusb-padctl + + reg: + items: + - description: pad controller registers + - description: AO registers + + interrupts: + items: + - description: XUSB pad controller interrupt + + reg-names: + items: + - const: padctl + - const: ao + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-pll-erefeut-supply: + description: UPHY brick and reference clock as well as UTMI PHY + power supply. Must supply 1.8 V. + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + vddio-hsic-supply: + description: HSIC PHY power supply. Must supply 1.2 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + usb3-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + hsic-0: + type: object + additionalProperties: false + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-pll-erefeut-supply + - avdd-usb-supply + - vclamp-usb-supply + - vddio-hsic-supply + +examples: + - | + #include <dt-bindings/clock/tegra186-clock.h> + #include <dt-bindings/gpio/tegra186-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/tegra186-reset.h> + + padctl@3520000 { + compatible = "nvidia,tegra186-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&bpmp TEGRA186_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-pll-erefeut-supply = <&vdd_1v8_pll>; + avdd-usb-supply = <&vdd_3v3_sys>; + vclamp-usb-supply = <&vdd_1v8>; + vddio-hsic-supply = <&gnd>; + + pads { + usb2 { + clocks = <&bpmp TEGRA186_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&bpmp TEGRA186_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "otg"; + vbus-supply = <&vdd_usb0>; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(X, 7) GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_usb1>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + hsic-0 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra194-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra194-xusb-padctl.yaml new file mode 100644 index 000000000000..6e3398399628 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra194-xusb-padctl.yaml @@ -0,0 +1,632 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra194-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra194 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + enum: + - nvidia,tegra194-xusb-padctl + - nvidia,tegra234-xusb-padctl + + reg: + items: + - description: pad controller registers + - description: AO registers + + reg-names: + items: + - const: padctl + - const: ao + + interrupts: + items: + - description: XUSB pad controller interrupt + + resets: + items: + - description: pad controller reset + + reset-names: + items: + - const: padctl + + avdd-usb-supply: + description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must + supply 3.3 V. + + vclamp-usb-supply: + description: Bias rail for USB pad. Must supply 1.8 V. + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb2-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3: + type: object + additionalProperties: false + properties: + lanes: + type: object + additionalProperties: false + properties: + usb3-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + usb3-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ xusb ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-3: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb3-0: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-3: + type: object + additionalProperties: false + properties: + maximum-speed: + description: A string property that specifies the maximum + supported speed of a USB3 port. + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - description: The USB3 port supports USB 3.1 Gen 2 speed. + This is the default. + const: super-speed-plus + - description: The USB3 port supports USB 3.1 Gen 1 speed + only. + const: super-speed + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - compatible + - reg + - resets + - reset-names + - avdd-usb-supply + - vclamp-usb-supply + +examples: + - | + #include <dt-bindings/clock/tegra194-clock.h> + #include <dt-bindings/gpio/tegra194-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/tegra194-reset.h> + + padctl@3520000 { + compatible = "nvidia,tegra194-xusb-padctl"; + reg = <0x03520000 0x1000>, + <0x03540000 0x1000>; + reg-names = "padctl", "ao"; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + + resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>; + reset-names = "padctl"; + + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + pads { + usb2 { + clocks = <&bpmp TEGRA194_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + usb3 { + lanes { + usb3-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb3-1 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-2 { + nvidia,function = "xusb"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb3-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "disabled"; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + mode = "host"; + }; + + usb2-2 { + status = "disabled"; + }; + + usb2-3 { + vbus-supply = <&vdd_5v_sata>; + mode = "host"; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + status = "disabled"; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + maximum-speed = "super-speed"; + vbus-supply = <&vdd_5v0_sys>; + nvidia,usb2-companion = <3>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml new file mode 100644 index 000000000000..d16bd6e47f90 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra210-xusb-padctl.yaml @@ -0,0 +1,786 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/nvidia,tegra210-xusb-padctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NVIDIA Tegra210 XUSB pad controller + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Jon Hunter <jonathanh@nvidia.com> + +description: | + The Tegra XUSB pad controller manages a set of I/O lanes (with differential + signals) which connect directly to pins/pads on the SoC package. Each lane + is controlled by a HW block referred to as a "pad" in the Tegra hardware + documentation. Each such "pad" may control either one or multiple lanes, + and thus contains any logic common to all its lanes. Each lane can be + separately configured and powered up. + + Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or + super-speed USB. Other lanes are for various types of low-speed, full-speed + or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller + contains a software-configurable mux that sits between the I/O controller + ports (e.g. PCIe) and the lanes. + + In addition to per-lane configuration, USB 3.0 ports may require additional + settings on a per-board basis. + + Pads will be represented as children of the top-level XUSB pad controller + device tree node. Each lane exposed by the pad will be represented by its + own subnode and can be referenced by users of the lane using the standard + PHY bindings, as described by the phy-bindings.txt file in this directory. + + The Tegra hardware documentation refers to the connection between the XUSB + pad controller and the XUSB controller as "ports". This is confusing since + "port" is typically used to denote the physical USB receptacle. The device + tree binding in this document uses the term "port" to refer to the logical + abstraction of the signals that are routed to a USB receptacle (i.e. a PHY + for the USB signal, the VBUS power supply, the USB 2.0 companion port for + USB 3.0 receptacles, ...). + +properties: + compatible: + const: nvidia,tegra210-xusb-padctl + + reg: + maxItems: 1 + + resets: + items: + - description: pad controller reset + + interrupts: + items: + - description: XUSB pad controller interrupt + + reset-names: + items: + - const: padctl + + avdd-pll-utmip-supply: + description: UTMI PLL power supply. Must supply 1.8 V. + + avdd-pll-uerefe-supply: + description: PLLE reference PLL power supply. Must supply 1.05 V. + + dvdd-pex-pll-supply: + description: PCIe/USB3 PLL power supply. Must supply 1.05 V. + + hvdd-pex-pll-e-supply: + description: High-voltage PLLE power supply. Must supply 1.8 V. + + nvidia,pmc: + description: phandle to the Tegra Power Management Controller (PMC) node + $ref: /schemas/types.yaml#/definitions/phandle + + pads: + description: A required child node named "pads" contains a list of + subnodes, one for each of the pads exposed by the XUSB pad controller. + Each pad may need additional resources that can be referenced in its + pad node. + + The "status" property is used to enable or disable the use of a pad. + If set to "disabled", the pad will not be used on the given board. In + order to use the pad and any of its lanes, this property must be set + to "okay" or be absent. + type: object + additionalProperties: false + properties: + usb2: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: USB2 tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + usb2-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb, uart ] + + hsic: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: HSIC tracking clock + + clock-names: + items: + - const: trk + + lanes: + type: object + additionalProperties: false + properties: + hsic-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + hsic-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ snps, xusb ] + + pcie: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: PCIe PLL clock source + + clock-names: + items: + - const: pll + + resets: + items: + - description: PCIe PHY reset + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + pcie-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-1: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-2: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-3: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-4: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-5: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + pcie-6: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ pcie-x1, usb3-ss, pcie-x4 ] + + sata: + type: object + additionalProperties: false + properties: + clocks: + items: + - description: SATA PLL clock source + + clock-names: + items: + - const: pll + + resets: + items: + - description: SATA PHY reset + + reset-names: + items: + - const: phy + + lanes: + type: object + additionalProperties: false + properties: + sata-0: + type: object + additionalProperties: false + properties: + "#phy-cells": + const: 0 + + nvidia,function: + description: Function selection for this lane. + $ref: /schemas/types.yaml#/definitions/string + enum: [ usb3-ss, sata ] + + ports: + description: A required child node named "ports" contains a list of + subnodes, one for each of the ports exposed by the XUSB pad controller. + Each port may need additional resources that can be referenced in its + port node. + + The "status" property is used to enable or disable the use of a port. + If set to "disabled", the port will not be used on the given board. In + order to use the port, this property must be set to "okay". + type: object + additionalProperties: false + properties: + usb2-0: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-1: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-2: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + usb2-3: + type: object + additionalProperties: false + properties: + # no need to further describe this because the connector will + # match on gpio-usb-b-connector or usb-b-connector and cause + # that binding to be selected for the subnode + connector: + type: object + + mode: + description: A string that determines the mode in which to + run the port. + $ref: /schemas/types.yaml#/definitions/string + enum: [ host, peripheral, otg ] + + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + usb-role-switch: + description: | + A boolean property whole presence indicates that the port + supports OTG or peripheral mode. If present, the port + supports switching between USB host and peripheral roles. + A connector must be added as a subnode in that case. + + See ../connector/usb-connector.yaml. + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + dependencies: + usb-role-switch: [ connector ] + + hsic-0: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + hsic-1: + type: object + additionalProperties: false + properties: + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-0: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-1: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-2: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + + usb3-3: + type: object + additionalProperties: false + properties: + nvidia,internal: + description: A boolean property whose presence determines + that a port is internal. In the absence of this property + the port is considered to be external. + $ref: /schemas/types.yaml#/definitions/flag + + nvidia,usb2-companion: + description: A single cell that specifies the physical port + number to map this super-speed USB port to. The range of + valid port numbers varies with the SoC generation. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS + voltage. + +additionalProperties: false + +required: + - avdd-pll-utmip-supply + - avdd-pll-uerefe-supply + - dvdd-pex-pll-supply + - hvdd-pex-pll-e-supply + +examples: + - | + #include <dt-bindings/clock/tegra210-car.h> + #include <dt-bindings/gpio/tegra-gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + padctl@7009f000 { + compatible = "nvidia,tegra210-xusb-padctl"; + reg = <0x7009f000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + avdd-pll-utmip-supply = <&vdd_1v8>; + avdd-pll-uerefe-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + + pads { + usb2 { + clocks = <&tegra_car TEGRA210_CLK_USB2_TRK>; + clock-names = "trk"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-1 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-2 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + + usb2-3 { + nvidia,function = "xusb"; + #phy-cells = <0>; + }; + }; + }; + + hsic { + clocks = <&tegra_car TEGRA210_CLK_HSIC_TRK>; + clock-names = "trk"; + status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + + pcie { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 205>; + reset-names = "phy"; + + lanes { + pcie-0 { + nvidia,function = "pcie-x1"; + #phy-cells = <0>; + }; + + pcie-1 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-2 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-3 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-4 { + nvidia,function = "pcie-x4"; + #phy-cells = <0>; + }; + + pcie-5 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + + pcie-6 { + nvidia,function = "usb3-ss"; + #phy-cells = <0>; + }; + }; + }; + + sata { + clocks = <&tegra_car TEGRA210_CLK_PLL_E>; + clock-names = "pll"; + resets = <&tegra_car 204>; + reset-names = "phy"; + + lanes { + sata-0 { + nvidia,function = "sata"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { + mode = "peripheral"; + usb-role-switch; + + connector { + compatible = "gpio-usb-b-connector", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_LOW>; + }; + }; + + usb2-1 { + vbus-supply = <&vdd_5v0_rtl>; + mode = "host"; + }; + + usb2-2 { + vbus-supply = <&vdd_usb_vbus>; + mode = "host"; + }; + + usb2-3 { + mode = "host"; + }; + + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + nvidia,usb2-companion = <1>; + }; + + usb3-1 { + nvidia,usb2-companion = <2>; + }; + + usb3-2 { + status = "disabled"; + }; + + usb3-3 { + status = "disabled"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml index be41acbd3b6c..80a5348dbfde 100644 --- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml @@ -75,6 +75,9 @@ patternProperties: minItems: 3 maxItems: 6 + "#clock-cells": + const: 1 + "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml index 0c6b3ba7346b..e81a38281f8c 100644 --- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml @@ -30,6 +30,7 @@ properties: - qcom,sdm845-qmp-usb3-uni-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy + - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-phy @@ -253,6 +254,7 @@ allOf: contains: enum: - qcom,qcm2290-qmp-usb3-phy + - qcom,sm6115-qmp-usb3-phy then: properties: clocks: @@ -321,6 +323,7 @@ allOf: - qcom,sc8180x-qmp-usb3-phy - qcom,sdx55-qmp-usb3-uni-phy - qcom,sdx65-qmp-usb3-uni-phy + - qcom,sm6115-qmp-usb3-phy - qcom,sm8150-qmp-usb3-uni-phy - qcom,sm8250-qmp-usb3-phy then: diff --git a/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml new file mode 100644 index 000000000000..dbc4a4c71f05 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,pcie2-phy.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,pcie2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PCIe2 PHY controller + +maintainers: + - Vinod Koul <vkoul@kernel.org> + +description: + The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm + platforms. + +properties: + compatible: + items: + - const: qcom,qcs404-pcie2-phy + - const: qcom,pcie2-phy + + reg: + items: + - description: PHY register set + + clocks: + items: + - description: a clock-specifier pair for the "pipe" clock + + clock-output-names: + maxItems: 1 + + "#clock-cells": + const: 0 + + "#phy-cells": + const: 0 + + vdda-vp-supply: + description: low voltage regulator + + vdda-vph-supply: + description: high voltage regulator + + resets: + maxItems: 2 + + reset-names: + items: + - const: phy + - const: pipe + +required: + - compatible + - reg + - clocks + - clock-output-names + - "#clock-cells" + - "#phy-cells" + - vdda-vp-supply + - vdda-vph-supply + - resets + - reset-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-qcs404.h> + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + #phy-cells = <0>; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml index 636ea430fbff..7f403e77f320 100644 --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml @@ -82,81 +82,74 @@ properties: Phandle to TCSR syscon register region. $ref: /schemas/types.yaml#/definitions/phandle -if: - properties: - compatible: - contains: - const: qcom,qusb2-v2-phy -then: - properties: - qcom,imp-res-offset-value: - description: - It is a 6 bit value that specifies offset to be - added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 63 - default: 0 - - qcom,bias-ctrl-value: - description: - It is a 6 bit value that specifies bias-ctrl-value. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 63 - default: 32 - - qcom,charge-ctrl-value: - description: - It is a 2 bit value that specifies charge-ctrl-value. It is a PHY - tuning parameter that may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 0 - - qcom,hstx-trim-value: - description: - It is a 4 bit value that specifies tuning for HSTX - output current. - Possible range is - 15mA to 24mA (stepsize of 600 uA). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 15 - default: 3 - - qcom,preemphasis-level: - description: - It is a 2 bit value that specifies pre-emphasis level. - Possible range is 0 to 15% (stepsize of 5%). - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 2 - - qcom,preemphasis-width: - description: - It is a 1 bit value that specifies how long the HSTX - pre-emphasis (specified using qcom,preemphasis-level) must be in - effect. Duration could be half-bit of full-bit. - See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 1 - default: 0 - - qcom,hsdisc-trim-value: - description: - It is a 2 bit value tuning parameter that control disconnect - threshold and may vary for different boards of same SOC. - $ref: /schemas/types.yaml#/definitions/uint32 - minimum: 0 - maximum: 3 - default: 0 + qcom,imp-res-offset-value: + description: + It is a 6 bit value that specifies offset to be + added to PHY refgen RESCODE via IMP_CTRL1 register. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 0 + + qcom,bias-ctrl-value: + description: + It is a 6 bit value that specifies bias-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 63 + default: 32 + + qcom,charge-ctrl-value: + description: + It is a 2 bit value that specifies charge-ctrl-value. It is a PHY + tuning parameter that may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + qcom,hstx-trim-value: + description: + It is a 4 bit value that specifies tuning for HSTX + output current. + Possible range is - 15mA to 24mA (stepsize of 600 uA). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 3 + + qcom,preemphasis-level: + description: + It is a 2 bit value that specifies pre-emphasis level. + Possible range is 0 to 15% (stepsize of 5%). + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 2 + + qcom,preemphasis-width: + description: + It is a 1 bit value that specifies how long the HSTX + pre-emphasis (specified using qcom,preemphasis-level) must be in + effect. Duration could be half-bit of full-bit. + See dt-bindings/phy/phy-qcom-qusb2.h for applicable values. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 1 + default: 0 + + qcom,hsdisc-trim-value: + description: + It is a 2 bit value tuning parameter that control disconnect + threshold and may vary for different boards of same SOC. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 required: - compatible @@ -169,6 +162,23 @@ required: - vdda-phy-dpdm-supply - resets +allOf: + - if: + not: + properties: + compatible: + contains: + const: qcom,qusb2-v2-phy + then: + properties: + qcom,imp-res-offset-value: false + qcom,bias-ctrl-value: false + qcom,charge-ctrl-value: false + qcom,hstx-trim-value: false + qcom,preemphasis-level: false + qcom,preemphasis-width: false + qcom,hsdisc-trim-value: false + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml index d9d0ab90edb1..2e19a434c669 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml @@ -19,12 +19,17 @@ maintainers: properties: compatible: - enum: - - qcom,sc7180-qmp-usb3-dp-phy - - qcom,sc7280-qmp-usb3-dp-phy - - qcom,sc8180x-qmp-usb3-dp-phy - - qcom,sdm845-qmp-usb3-dp-phy - - qcom,sm8250-qmp-usb3-dp-phy + oneOf: + - enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sc8180x-qmp-usb3-dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + - qcom,sm8250-qmp-usb3-dp-phy + - items: + - enum: + - qcom,sc7280-qmp-usb3-dp-phy + - const: qcom,sm8250-qmp-usb3-dp-phy + reg: items: - description: Address and length of PHY's USB serdes block. @@ -46,18 +51,12 @@ properties: ranges: true clocks: - items: - - description: Phy aux clock. - - description: Phy config clock. - - description: 19.2 MHz ref clk. - - description: Phy common block aux clock. + minItems: 3 + maxItems: 4 clock-names: - items: - - const: aux - - const: cfg_ahb - - const: ref - - const: com_aux + minItems: 3 + maxItems: 4 power-domains: maxItems: 1 @@ -166,6 +165,64 @@ required: - vdda-phy-supply - vdda-pll-supply +allOf: + - if: + properties: + compatible: + enum: + - qcom,sc7180-qmp-usb3-dp-phy + - qcom,sdm845-qmp-usb3-dp-phy + then: + properties: + clocks: + items: + - description: Phy aux clock + - description: Phy config clock + - description: 19.2 MHz ref clk + - description: Phy common block aux clock + clock-names: + items: + - const: aux + - const: cfg_ahb + - const: ref + - const: com_aux + + - if: + properties: + compatible: + enum: + - qcom,sc8180x-qmp-usb3-dp-phy + then: + properties: + clocks: + items: + - description: Phy aux clock + - description: 19.2 MHz ref clk + - description: Phy common block aux clock + clock-names: + items: + - const: aux + - const: ref + - const: com_aux + + - if: + properties: + compatible: + enum: + - qcom,sm8250-qmp-usb3-dp-phy + then: + properties: + clocks: + items: + - description: Phy aux clock + - description: Board XO source + - description: Phy common block aux clock + clock-names: + items: + - const: aux + - const: ref_clk_src + - const: com_aux + additionalProperties: false examples: diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml index 80aa8d2507fb..ef49efbd0a20 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml @@ -19,15 +19,20 @@ properties: - qcom,sc8280xp-qmp-gen3x1-pcie-phy - qcom,sc8280xp-qmp-gen3x2-pcie-phy - qcom,sc8280xp-qmp-gen3x4-pcie-phy + - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8550-qmp-gen3x2-pcie-phy + - qcom,sm8550-qmp-gen4x2-pcie-phy reg: minItems: 1 maxItems: 2 clocks: + minItems: 5 maxItems: 6 clock-names: + minItems: 5 items: - const: aux - const: cfg_ahb @@ -40,16 +45,21 @@ properties: maxItems: 1 resets: - maxItems: 1 + minItems: 1 + maxItems: 2 reset-names: + minItems: 1 items: - const: phy + - const: phy_nocsr vdda-phy-supply: true vdda-pll-supply: true + vdda-qref-supply: true + qcom,4ln-config-sel: description: PCIe 4-lane configuration $ref: /schemas/types.yaml#/definitions/phandle-array @@ -104,6 +114,46 @@ allOf: reg: maxItems: 1 + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8350-qmp-gen3x1-pcie-phy + - qcom,sm8550-qmp-gen3x2-pcie-phy + - qcom,sm8550-qmp-gen4x2-pcie-phy + then: + properties: + clocks: + maxItems: 5 + clock-names: + maxItems: 5 + else: + properties: + clocks: + minItems: 6 + clock-names: + minItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8550-qmp-gen4x2-pcie-phy + then: + properties: + resets: + minItems: 2 + reset-names: + minItems: 2 + else: + properties: + resets: + maxItems: 1 + reset-names: + maxItems: 1 + examples: - | #include <dt-bindings/clock/qcom,gcc-sc8280xp.h> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml index dde86a19f792..64ed331880f6 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml @@ -17,6 +17,8 @@ properties: compatible: enum: - qcom,sc8280xp-qmp-ufs-phy + - qcom,sm6125-qmp-ufs-phy + - qcom,sm8550-qmp-ufs-phy reg: maxItems: 1 @@ -43,6 +45,9 @@ properties: vdda-pll-supply: true + "#clock-cells": + const: 1 + "#phy-cells": const: 0 diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml index 6f31693d9868..3cd5fc3e8fab 100644 --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml @@ -17,6 +17,10 @@ properties: compatible: enum: - qcom,sc8280xp-qmp-usb43dp-phy + - qcom,sm6350-qmp-usb3-dp-phy + - qcom,sm8350-qmp-usb3-dp-phy + - qcom,sm8450-qmp-usb3-dp-phy + - qcom,sm8550-qmp-usb3-dp-phy reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml new file mode 100644 index 000000000000..c53bab107b6d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-phy.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SNPS eUSB2 phy controller + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + eUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +properties: + compatible: + const: qcom,sm8550-snps-eusb2-phy + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + clocks: + items: + - description: ref + + clock-names: + items: + - const: ref + + resets: + maxItems: 1 + + phys: + maxItems: 1 + description: + Phandle to eUSB2 to USB 2.0 repeater + + vdd-supply: + description: + Phandle to 0.88V regulator supply to PHY digital circuit. + + vdda12-supply: + description: + Phandle to 1.2V regulator supply to PHY refclk pll block. + +required: + - compatible + - reg + - "#phy-cells" + - clocks + - clock-names + - vdd-supply + - vdda12-supply + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,sm8550-gcc.h> + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/clock/qcom,sm8550-tcsr.h> + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm8550-snps-eusb2-phy"; + reg = <0x88e3000 0x154>; + #phy-cells = <0>; + + clocks = <&tcsrcc TCSR_USB2_CLKREF_EN>; + clock-names = "ref"; + + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml new file mode 100644 index 000000000000..083fda530b48 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,snps-eusb2-repeater.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Synopsis eUSB2 to USB 2.0 repeater + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + eUSB2 repeater converts between eUSB2 and USB 2.0 signaling levels and + allows a eUSB2 PHY to connect to legacy USB 2.0 products + +properties: + compatible: + const: qcom,pm8550b-eusb2-repeater + + reg: + maxItems: 1 + + "#phy-cells": + const: 0 + + vdd18-supply: true + + vdd3-supply: true + +required: + - compatible + - reg + - "#phy-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + + pmic@7 { + reg = <0x7 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8550b_eusb2_repeater: phy@fd00 { + compatible = "qcom,pm8550b-eusb2-repeater"; + reg = <0xfd00>; + #phy-cells = <0>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt deleted file mode 100644 index 3c7cb2be4b12..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt +++ /dev/null @@ -1,65 +0,0 @@ -Qualcomm's USB HSIC PHY - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the - following: - - "qcom,usb-hsic-phy-mdm9615" - "qcom,usb-hsic-phy-msm8974" - -- #phy-cells: - Usage: required - Value type: <u32> - Definition: Should contain 0 - -- clocks: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain clock specifier for phy, calibration and - a calibration sleep clock - -- clock-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "phy, "cal" and "cal_sleep" - -- pinctrl-names: - Usage: required - Value type: <stringlist> - Definition: Should contain "init" and "default" in that order - -- pinctrl-0: - Usage: required - Value type: <prop-encoded-array> - Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch - free state - -- pinctrl-1: - Usage: required - Value type: <prop-encoded-array> - Definition: List of pinctrl settings to apply to mux out the HSIC pins - -EXAMPLE - -usb-controller { - ulpi { - phy { - compatible = "qcom,usb-hsic-phy-msm8974", - "qcom,usb-hsic-phy"; - #phy-cells = <0>; - pinctrl-names = "init", "default"; - pinctrl-0 = <&hsic_sleep>; - pinctrl-1 = <&hsic_default>; - clocks = <&gcc GCC_USB_HSIC_CLK>, - <&gcc GCC_USB_HSIC_IO_CAL_CLK>, - <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; - clock-names = "phy", "cal", "cal_sleep"; - assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>; - assigned-clock-rates = <960000>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.yaml new file mode 100644 index 000000000000..077e13a94448 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/qcom,usb-hsic-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm USB HSIC PHY Controller + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Vinod Koul <vkoul@kernel.org> + +properties: + compatible: + items: + - enum: + - qcom,usb-hsic-phy-mdm9615 + - qcom,usb-hsic-phy-msm8974 + - const: qcom,usb-hsic-phy + + clocks: + maxItems: 3 + + clock-names: + items: + - const: phy + - const: cal + - const: cal_sleep + + "#phy-cells": + const: 0 + + pinctrl-0: true + pinctrl-1: true + + pinctrl-names: + items: + - const: init + - const: default + +required: + - compatible + - clocks + - clock-names + - "#phy-cells" + - pinctrl-0 + - pinctrl-1 + - pinctrl-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,gcc-msm8974.h> + + phy { + compatible = "qcom,usb-hsic-phy-msm8974", + "qcom,usb-hsic-phy"; + clocks = <&gcc GCC_USB_HSIC_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; + clock-names = "phy", "cal", "cal_sleep"; + #phy-cells = <0>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&hsic_sleep>; + pinctrl-1 = <&hsic_default>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 68e70961beb2..85d405e028b9 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -14,18 +14,25 @@ description: | properties: compatible: - enum: - - qcom,usb-snps-hs-5nm-phy - - qcom,usb-snps-hs-7nm-phy - - qcom,sc7280-usb-hs-phy - - qcom,sc8180x-usb-hs-phy - - qcom,sc8280xp-usb-hs-phy - - qcom,sm6375-usb-hs-phy - - qcom,sm8150-usb-hs-phy - - qcom,sm8250-usb-hs-phy - - qcom,sm8350-usb-hs-phy - - qcom,sm8450-usb-hs-phy - - qcom,usb-snps-femto-v2-phy + oneOf: + - enum: + - qcom,sc8180x-usb-hs-phy + - qcom,usb-snps-femto-v2-phy + - items: + - enum: + - qcom,sc8280xp-usb-hs-phy + - const: qcom,usb-snps-hs-5nm-phy + - items: + - enum: + - qcom,sc7280-usb-hs-phy + - qcom,sdx55-usb-hs-phy + - qcom,sdx65-usb-hs-phy + - qcom,sm6375-usb-hs-phy + - qcom,sm8150-usb-hs-phy + - qcom,sm8250-usb-hs-phy + - qcom,sm8350-usb-hs-phy + - qcom,sm8450-usb-hs-phy + - const: qcom,usb-snps-hs-7nm-phy reg: maxItems: 1 @@ -160,7 +167,7 @@ examples: #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> phy@88e2000 { - compatible = "qcom,sm8150-usb-hs-phy"; + compatible = "qcom,sm8150-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy"; reg = <0x088e2000 0x400>; #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt deleted file mode 100644 index 30064253f290..000000000000 --- a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt +++ /dev/null @@ -1,42 +0,0 @@ -Qualcomm PCIe2 PHY controller -============================= - -The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm -platforms. - -Required properties: - - compatible: compatible list, should be: - "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" - - - reg: offset and length of the PHY register set. - - #phy-cells: must be 0. - - - clocks: a clock-specifier pair for the "pipe" clock - - - vdda-vp-supply: phandle to low voltage regulator - - vdda-vph-supply: phandle to high voltage regulator - - - resets: reset-specifier pairs for the "phy" and "pipe" resets - - reset-names: list of resets, should contain: - "phy" and "pipe" - - - clock-output-names: name of the outgoing clock signal from the PHY PLL - - #clock-cells: must be 0 - -Example: - phy@7786000 { - compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; - reg = <0x07786000 0xb8>; - - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, - <&gcc GCC_PCIE_0_PIPE_ARES>; - reset-names = "phy", "pipe"; - - vdda-vp-supply = <&vreg_l3_1p05>; - vdda-vph-supply = <&vreg_l5_1p8>; - - clock-output-names = "pcie_0_pipe_clk"; - #clock-cells = <0>; - #phy-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml index 02b76f15e717..237295b2b5a8 100644 --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml @@ -15,6 +15,7 @@ properties: compatible: enum: + - nxp,tjr1443 - ti,tcan1042 - ti,tcan1043 diff --git a/Documentation/driver-api/phy/phy.rst b/Documentation/driver-api/phy/phy.rst index 8e8b3e8f9523..81785c084f3e 100644 --- a/Documentation/driver-api/phy/phy.rst +++ b/Documentation/driver-api/phy/phy.rst @@ -103,27 +103,31 @@ it. This framework provides the following APIs to get a reference to the PHY. :: struct phy *phy_get(struct device *dev, const char *string); - struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); struct phy *devm_phy_optional_get(struct device *dev, const char *string); + struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, + const char *con_id); + struct phy *devm_of_phy_optional_get(struct device *dev, + struct device_node *np, + const char *con_id); struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, int index); -phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can -be used to get the PHY. In the case of dt boot, the string arguments +phy_get, devm_phy_get and devm_phy_optional_get can be used to get the PHY. +In the case of dt boot, the string arguments should contain the phy name as given in the dt data and in the case of non-dt boot, it should contain the label of the PHY. The two devm_phy_get associates the device with the PHY using devres on successful PHY get. On driver detach, release function is invoked on -the devres data and devres data is freed. phy_optional_get and -devm_phy_optional_get should be used when the phy is optional. These -two functions will never return -ENODEV, but instead returns NULL when -the phy cannot be found.Some generic drivers, such as ehci, may use multiple -phys and for such drivers referencing phy(s) by name(s) does not make sense. In -this case, devm_of_phy_get_by_index can be used to get a phy reference based on -the index. +the devres data and devres data is freed. +The _optional_get variants should be used when the phy is optional. These +functions will never return -ENODEV, but instead return NULL when +the phy cannot be found. +Some generic drivers, such as ehci, may use multiple phys. In this case, +devm_of_phy_get or devm_of_phy_get_by_index can be used to get a phy +reference based on name or index. It should be noted that NULL is a valid phy reference. All phy consumer calls on the NULL phy become NOPs. That is the release calls, diff --git a/drivers/net/ethernet/freescale/fman/fman_memac.c b/drivers/net/ethernet/freescale/fman/fman_memac.c index 587ad81a2dc3..625c79d5636f 100644 --- a/drivers/net/ethernet/freescale/fman/fman_memac.c +++ b/drivers/net/ethernet/freescale/fman/fman_memac.c @@ -1155,13 +1155,12 @@ int memac_initialization(struct mac_device *mac_dev, else memac->sgmii_pcs = pcs; - memac->serdes = devm_of_phy_get(mac_dev->dev, mac_node, "serdes"); - err = PTR_ERR(memac->serdes); - if (err == -ENODEV || err == -ENOSYS) { + memac->serdes = devm_of_phy_optional_get(mac_dev->dev, mac_node, + "serdes"); + if (!memac->serdes) { dev_dbg(mac_dev->dev, "could not get (optional) serdes\n"); - memac->serdes = NULL; } else if (IS_ERR(memac->serdes)) { - dev_err_probe(mac_dev->dev, err, "could not get serdes\n"); + err = PTR_ERR(memac->serdes); goto _return_fm_mac_free; } diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c index 8b89de0541ff..685e8cd7658c 100644 --- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c +++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c @@ -1154,9 +1154,8 @@ static int lan966x_probe(struct platform_device *pdev) lan966x->ports[p]->config.portmode = phy_mode; lan966x->ports[p]->fwnode = fwnode_handle_get(portnp); - serdes = devm_of_phy_get(lan966x->dev, to_of_node(portnp), NULL); - if (PTR_ERR(serdes) == -ENODEV) - serdes = NULL; + serdes = devm_of_phy_optional_get(lan966x->dev, + to_of_node(portnp), NULL); if (IS_ERR(serdes)) { err = PTR_ERR(serdes); goto cleanup_ports; diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c index 5bb05564d6f8..74c109f14ff0 100644 --- a/drivers/pci/controller/pci-tegra.c +++ b/drivers/pci/controller/pci-tegra.c @@ -1330,12 +1330,9 @@ static struct phy *devm_of_phy_optional_get_index(struct device *dev, if (!name) return ERR_PTR(-ENOMEM); - phy = devm_of_phy_get(dev, np, name); + phy = devm_of_phy_optional_get(dev, np, name); kfree(name); - if (PTR_ERR(phy) == -ENODEV) - phy = NULL; - return phy; } diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 5472db9e87ef..fbcd7014ab43 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -99,28 +99,17 @@ #define DEBOUNCE_TIME msecs_to_jiffies(50) #define POLL_TIME msecs_to_jiffies(250) -enum sun4i_usb_phy_type { - sun4i_a10_phy, - sun6i_a31_phy, - sun8i_a33_phy, - sun8i_a83t_phy, - sun8i_h3_phy, - sun8i_r40_phy, - sun8i_v3s_phy, - sun50i_a64_phy, - sun50i_h6_phy, -}; - struct sun4i_usb_phy_cfg { int num_phys; int hsic_index; - enum sun4i_usb_phy_type type; u32 disc_thresh; u32 hci_phy_ctl_clear; u8 phyctl_offset; bool dedicated_clocks; bool phy0_dual_route; bool needs_phy2_siddq; + bool siddq_in_base; + bool poll_vbusen; int missing_phys; }; @@ -252,7 +241,8 @@ static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; /* A83T USB2 is HSIC */ - if (phy_data->cfg->type == sun8i_a83t_phy && phy->index == 2) + if (phy_data->cfg->hsic_index && + phy->index == phy_data->cfg->hsic_index) bits |= SUNXI_EHCI_HS_FORCE | SUNXI_HSIC_CONNECT_INT | SUNXI_HSIC; @@ -340,8 +330,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) writel(val, phy->pmu + REG_HCI_PHY_CTL); } - if (data->cfg->type == sun8i_a83t_phy || - data->cfg->type == sun50i_h6_phy) { + if (data->cfg->siddq_in_base) { if (phy->index == 0) { val = readl(data->base + data->cfg->phyctl_offset); val |= PHY_CTL_VBUSVLDEXT; @@ -385,8 +374,7 @@ static int sun4i_usb_phy_exit(struct phy *_phy) struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); if (phy->index == 0) { - if (data->cfg->type == sun8i_a83t_phy || - data->cfg->type == sun50i_h6_phy) { + if (data->cfg->siddq_in_base) { void __iomem *phyctl = data->base + data->cfg->phyctl_offset; @@ -466,9 +454,8 @@ static bool sun4i_usb_phy0_poll(struct sun4i_usb_phy_data *data) * vbus using the N_VBUSEN pin on the pmic, so we must poll * when using the pmic for vbus-det _and_ we're driving vbus. */ - if ((data->cfg->type == sun6i_a31_phy || - data->cfg->type == sun8i_a33_phy) && - data->vbus_power_supply && data->phys[0].regulator_on) + if (data->cfg->poll_vbusen && data->vbus_power_supply && + data->phys[0].regulator_on) return true; return false; @@ -918,9 +905,15 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) return 0; } +static const struct sun4i_usb_phy_cfg suniv_f1c100s_cfg = { + .num_phys = 1, + .disc_thresh = 3, + .phyctl_offset = REG_PHYCTL_A10, + .dedicated_clocks = true, +}; + static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { .num_phys = 3, - .type = sun4i_a10_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, @@ -928,7 +921,6 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = { static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { .num_phys = 2, - .type = sun4i_a10_phy, .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, @@ -936,15 +928,14 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = { static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = { .num_phys = 3, - .type = sun6i_a31_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, + .poll_vbusen = true, }; static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { .num_phys = 3, - .type = sun4i_a10_phy, .disc_thresh = 2, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = false, @@ -952,31 +943,30 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = { static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = { .num_phys = 2, - .type = sun6i_a31_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A10, .dedicated_clocks = true, + .poll_vbusen = true, }; static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = { .num_phys = 2, - .type = sun8i_a33_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, + .poll_vbusen = true, }; static const struct sun4i_usb_phy_cfg sun8i_a83t_cfg = { .num_phys = 3, .hsic_index = 2, - .type = sun8i_a83t_phy, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, + .siddq_in_base = true, }; static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { .num_phys = 4, - .type = sun8i_h3_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -986,7 +976,6 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = { static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { .num_phys = 3, - .type = sun8i_r40_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -996,7 +985,6 @@ static const struct sun4i_usb_phy_cfg sun8i_r40_cfg = { static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { .num_phys = 1, - .type = sun8i_v3s_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -1006,16 +994,15 @@ static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = { static const struct sun4i_usb_phy_cfg sun20i_d1_cfg = { .num_phys = 2, - .type = sun50i_h6_phy, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .hci_phy_ctl_clear = PHY_CTL_SIDDQ, .phy0_dual_route = true, + .siddq_in_base = true, }; static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { .num_phys = 2, - .type = sun50i_a64_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, @@ -1025,22 +1012,22 @@ static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = { static const struct sun4i_usb_phy_cfg sun50i_h6_cfg = { .num_phys = 4, - .type = sun50i_h6_phy, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .phy0_dual_route = true, .missing_phys = BIT(1) | BIT(2), + .siddq_in_base = true, }; static const struct sun4i_usb_phy_cfg sun50i_h616_cfg = { .num_phys = 4, - .type = sun50i_h6_phy, .disc_thresh = 3, .phyctl_offset = REG_PHYCTL_A33, .dedicated_clocks = true, .phy0_dual_route = true, .hci_phy_ctl_clear = PHY_CTL_SIDDQ, .needs_phy2_siddq = true, + .siddq_in_base = true, }; static const struct of_device_id sun4i_usb_phy_of_match[] = { @@ -1059,6 +1046,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = { .data = &sun50i_a64_cfg}, { .compatible = "allwinner,sun50i-h6-usb-phy", .data = &sun50i_h6_cfg }, { .compatible = "allwinner,sun50i-h616-usb-phy", .data = &sun50i_h616_cfg }, + { .compatible = "allwinner,suniv-f1c100s-usb-phy", + .data = &suniv_f1c100s_cfg }, { }, }; MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); diff --git a/drivers/phy/mediatek/phy-mtk-io.h b/drivers/phy/mediatek/phy-mtk-io.h index d20ad5e5be81..58f06db822cb 100644 --- a/drivers/phy/mediatek/phy-mtk-io.h +++ b/drivers/phy/mediatek/phy-mtk-io.h @@ -39,8 +39,8 @@ static inline void mtk_phy_update_bits(void __iomem *reg, u32 mask, u32 val) /* field @mask shall be constant and continuous */ #define mtk_phy_update_field(reg, mask, val) \ ({ \ - typeof(mask) mask_ = (mask); \ - mtk_phy_update_bits(reg, mask_, FIELD_PREP(mask_, val)); \ + BUILD_BUG_ON_MSG(!__builtin_constant_p(mask), "mask is not constant"); \ + mtk_phy_update_bits(reg, mask, FIELD_PREP(mask, val)); \ }) #endif diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c index ce511ad5d369..5487b9dd1ead 100644 --- a/drivers/phy/phy-can-transceiver.c +++ b/drivers/phy/phy-can-transceiver.c @@ -84,6 +84,10 @@ static const struct of_device_id can_transceiver_phy_ids[] = { .compatible = "ti,tcan1043", .data = &tcan1043_drvdata }, + { + .compatible = "nxp,tjr1443", + .data = &tcan1043_drvdata + }, { } }; MODULE_DEVICE_TABLE(of, can_transceiver_phy_ids); diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index d93ddf1262c5..9951efc03eaa 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -767,27 +767,6 @@ struct phy *phy_get(struct device *dev, const char *string) EXPORT_SYMBOL_GPL(phy_get); /** - * phy_optional_get() - lookup and obtain a reference to an optional phy. - * @dev: device that requests this phy - * @string: the phy name as given in the dt data or the name of the controller - * port for non-dt case - * - * Returns the phy driver, after getting a refcount to it; or - * NULL if there is no such phy. The caller is responsible for - * calling phy_put() to release that count. - */ -struct phy *phy_optional_get(struct device *dev, const char *string) -{ - struct phy *phy = phy_get(dev, string); - - if (PTR_ERR(phy) == -ENODEV) - phy = NULL; - - return phy; -} -EXPORT_SYMBOL_GPL(phy_optional_get); - -/** * devm_phy_get() - lookup and obtain a reference to a phy. * @dev: device that requests this phy * @string: the phy name as given in the dt data or phy device name @@ -880,6 +859,36 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, EXPORT_SYMBOL_GPL(devm_of_phy_get); /** + * devm_of_phy_optional_get() - lookup and obtain a reference to an optional + * phy. + * @dev: device that requests this phy + * @np: node containing the phy + * @con_id: name of the phy from device's point of view + * + * Gets the phy using of_phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. This differs to devm_of_phy_get() in + * that if the phy does not exist, it is not considered an error and + * -ENODEV will not be returned. Instead the NULL phy is returned, + * which can be passed to all other phy consumer calls. + */ +struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np, + const char *con_id) +{ + struct phy *phy = devm_of_phy_get(dev, np, con_id); + + if (PTR_ERR(phy) == -ENODEV) + phy = NULL; + + if (IS_ERR(phy)) + dev_err_probe(dev, PTR_ERR(phy), "failed to get PHY %pOF:%s", + np, con_id); + + return phy; +} +EXPORT_SYMBOL_GPL(devm_of_phy_optional_get); + +/** * devm_of_phy_get_by_index() - lookup and obtain a reference to a phy by index. * @dev: device that requests this phy * @np: node containing the phy diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index eb9ddc685b38..4850d48f31fa 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -50,14 +50,56 @@ config PHY_QCOM_PCIE2 Enable this to support the Qualcomm PCIe PHY, used with the Synopsys based PCIe controller. -config PHY_QCOM_QMP - tristate "Qualcomm QMP PHY Driver" +menuconfig PHY_QCOM_QMP + tristate "Qualcomm QMP PHY Drivers" depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST) + +if PHY_QCOM_QMP + +config PHY_QCOM_QMP_COMBO + tristate "Qualcomm QMP Combo PHY Driver" + default PHY_QCOM_QMP select GENERIC_PHY select MFD_SYSCON help - Enable this to support the QMP PHY transceiver that is used - with controllers such as PCIe, UFS, and USB on Qualcomm chips. + Enable this to support the QMP Combo PHY transceiver that is used + with USB3 and DisplayPort controllers on Qualcomm chips. + +config PHY_QCOM_QMP_PCIE + tristate "Qualcomm QMP PCIe PHY Driver" + depends on PCI || COMPILE_TEST + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP PCIe PHY transceiver that is used + with PCIe controllers on Qualcomm chips. + +config PHY_QCOM_QMP_PCIE_8996 + tristate "Qualcomm QMP PCIe 8996 PHY Driver" + depends on PCI || COMPILE_TEST + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP PCIe PHY transceiver that is used + with PCIe controllers on Qualcomm msm8996 chips. + +config PHY_QCOM_QMP_UFS + tristate "Qualcomm QMP UFS PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP UFS PHY transceiver that is used + with UFS controllers on Qualcomm chips. + +config PHY_QCOM_QMP_USB + tristate "Qualcomm QMP USB PHY Driver" + select GENERIC_PHY + default PHY_QCOM_QMP + help + Enable this to support the QMP USB PHY transceiver that is used + with USB3 controllers on Qualcomm chips. + +endif # PHY_QCOM_QMP config PHY_QCOM_QUSB2 tristate "Qualcomm QUSB2 PHY Driver" @@ -70,6 +112,24 @@ config PHY_QCOM_QUSB2 PHY which is usually paired with either the ChipIdea or Synopsys DWC3 USB IPs on MSM SOCs. +config PHY_QCOM_SNPS_EUSB2 + tristate "Qualcomm SNPS eUSB2 PHY Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 phy on Qualcomm + chipsets. The PHY is paired with a Synopsys DWC3 USB controller + on Qualcomm SOCs. + +config PHY_QCOM_EUSB2_REPEATER + tristate "Qualcomm SNPS eUSB2 Repeater Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm + PMICs. The repeater is paired with a Synopsys eUSB2 Phy + on Qualcomm SOCs. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 65f6c30a3e93..de3dc9ccf067 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -5,14 +5,16 @@ obj-$(CONFIG_PHY_QCOM_EDP) += phy-qcom-edp.o obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o -obj-$(CONFIG_PHY_QCOM_QMP) += \ - phy-qcom-qmp-combo.o \ - phy-qcom-qmp-pcie.o \ - phy-qcom-qmp-pcie-msm8996.o \ - phy-qcom-qmp-ufs.o \ - phy-qcom-qmp-usb.o + +obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o +obj-$(CONFIG_PHY_QCOM_QMP_PCIE) += phy-qcom-qmp-pcie.o +obj-$(CONFIG_PHY_QCOM_QMP_PCIE_8996) += phy-qcom-qmp-pcie-msm8996.o +obj-$(CONFIG_PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o +obj-$(CONFIG_PHY_QCOM_QMP_USB) += phy-qcom-qmp-usb.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o +obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o +obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER) += phy-qcom-eusb2-repeater.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c new file mode 100644 index 000000000000..3f265ac2df20 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regmap.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/phy/phy.h> + +/* eUSB2 status registers */ +#define EUSB2_RPTR_STATUS 0x08 +#define RPTR_OK BIT(7) + +/* eUSB2 control registers */ +#define EUSB2_EN_CTL1 0x46 +#define EUSB2_RPTR_EN BIT(7) + +#define EUSB2_FORCE_EN_5 0xe8 +#define F_CLK_19P2M_EN BIT(6) + +#define EUSB2_FORCE_VAL_5 0xeD +#define V_CLK_19P2M_EN BIT(6) + +#define EUSB2_TUNE_IUSB2 0x51 +#define EUSB2_TUNE_SQUELCH_U 0x54 +#define EUSB2_TUNE_USB2_PREEM 0x57 + +#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +struct eusb2_repeater_init_tbl { + unsigned int offset; + unsigned int val; +}; + +struct eusb2_repeater_cfg { + const struct eusb2_repeater_init_tbl *init_tbl; + int init_tbl_num; + const char * const *vreg_list; + int num_vregs; +}; + +struct eusb2_repeater { + struct device *dev; + struct regmap *regmap; + struct phy *phy; + struct regulator_bulk_data *vregs; + const struct eusb2_repeater_cfg *cfg; + u16 base; + enum phy_mode mode; +}; + +static const char * const pm8550b_vreg_l[] = { + "vdd18", "vdd3", +}; + +static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = { + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), +}; + +static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { + .init_tbl = pm8550b_init_tbl, + .init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl), + .vreg_list = pm8550b_vreg_l, + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), +}; + +static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr) +{ + int num = rptr->cfg->num_vregs; + struct device *dev = rptr->dev; + int i; + + rptr->vregs = devm_kcalloc(dev, num, sizeof(*rptr->vregs), GFP_KERNEL); + if (!rptr->vregs) + return -ENOMEM; + + for (i = 0; i < num; i++) + rptr->vregs[i].supply = rptr->cfg->vreg_list[i]; + + return devm_regulator_bulk_get(dev, num, rptr->vregs); +} + +static int eusb2_repeater_init(struct phy *phy) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; + int num = rptr->cfg->init_tbl_num; + u32 val; + int ret; + int i; + + ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); + if (ret) + return ret; + + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, + EUSB2_RPTR_EN, EUSB2_RPTR_EN); + + for (i = 0; i < num; i++) + regmap_update_bits(rptr->regmap, + rptr->base + init_tbl[i].offset, + init_tbl[i].val, init_tbl[i].val); + + ret = regmap_read_poll_timeout(rptr->regmap, + rptr->base + EUSB2_RPTR_STATUS, val, + val & RPTR_OK, 10, 5); + if (ret) + dev_err(rptr->dev, "initialization timed-out\n"); + + return ret; +} + +static int eusb2_repeater_set_mode(struct phy *phy, + enum phy_mode mode, int submode) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + /* + * CM.Lx is prohibited when repeater is already into Lx state as + * per eUSB 1.2 Spec. Below implement software workaround until + * PHY and controller is fixing seen observation. + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, F_CLK_19P2M_EN); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, V_CLK_19P2M_EN); + break; + case PHY_MODE_USB_DEVICE: + /* + * In device mode clear host mode related workaround as there + * is no repeater reset available, and enable/disable of + * repeater doesn't clear previous value due to shared + * regulators (say host <-> device mode switch). + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, 0); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int eusb2_repeater_exit(struct phy *phy) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + + return regulator_bulk_disable(rptr->cfg->num_vregs, rptr->vregs); +} + +static const struct phy_ops eusb2_repeater_ops = { + .init = eusb2_repeater_init, + .exit = eusb2_repeater_exit, + .set_mode = eusb2_repeater_set_mode, + .owner = THIS_MODULE, +}; + +static int eusb2_repeater_probe(struct platform_device *pdev) +{ + struct eusb2_repeater *rptr; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct device_node *np = dev->of_node; + u32 res; + int ret; + + rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); + if (!rptr) + return -ENOMEM; + + rptr->dev = dev; + dev_set_drvdata(dev, rptr); + + rptr->cfg = of_device_get_match_data(dev); + if (!rptr->cfg) + return -EINVAL; + + rptr->regmap = dev_get_regmap(dev->parent, NULL); + if (!rptr->regmap) + return -ENODEV; + + ret = of_property_read_u32(np, "reg", &res); + if (ret < 0) + return ret; + + rptr->base = res; + + ret = eusb2_repeater_init_vregs(rptr); + if (ret < 0) { + dev_err(dev, "unable to get supplies\n"); + return ret; + } + + rptr->phy = devm_phy_create(dev, np, &eusb2_repeater_ops); + if (IS_ERR(rptr->phy)) { + dev_err(dev, "failed to create PHY: %d\n", ret); + return PTR_ERR(rptr->phy); + } + + phy_set_drvdata(rptr->phy, rptr); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "Registered Qcom-eUSB2 repeater\n"); + + return 0; +} + +static int eusb2_repeater_remove(struct platform_device *pdev) +{ + struct eusb2_repeater *rptr = platform_get_drvdata(pdev); + + if (!rptr) + return 0; + + eusb2_repeater_exit(rptr->phy); + + return 0; +} + +static const struct of_device_id eusb2_repeater_of_match_table[] = { + { + .compatible = "qcom,pm8550b-eusb2-repeater", + .data = &pm8550b_eusb2_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table); + +static struct platform_driver eusb2_repeater_driver = { + .probe = eusb2_repeater_probe, + .remove = eusb2_repeater_remove, + .driver = { + .name = "qcom-eusb2-repeater", + .of_match_table = eusb2_repeater_of_match_table, + }, +}; + +module_platform_driver(eusb2_repeater_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 Repeater driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c index 5407e59bb185..11a2bb958681 100644 --- a/drivers/phy/qualcomm/phy-qcom-pcie2.c +++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c @@ -243,7 +243,11 @@ static int phy_pipe_clksrc_register(struct qcom_phy *qphy) fixed->fixed_rate = 250000000; fixed->hw.init = &init; - return devm_clk_hw_register(qphy->dev, &fixed->hw); + ret = devm_clk_hw_register(qphy->dev, &fixed->hw); + if (ret < 0) + return ret; + + return devm_of_clk_add_hw_provider(qphy->dev, of_clk_hw_simple_get, &fixed->hw); } static int qcom_pcie2_phy_probe(struct platform_device *pdev) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c index 77052c66cf70..c1483e157af4 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c @@ -23,6 +23,10 @@ #include <dt-bindings/phy/phy-qcom-qmp.h> #include "phy-qcom-qmp.h" +#include "phy-qcom-qmp-pcs-misc-v3.h" +#include "phy-qcom-qmp-pcs-usb-v4.h" +#include "phy-qcom-qmp-pcs-usb-v5.h" +#include "phy-qcom-qmp-pcs-usb-v6.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) @@ -56,9 +60,6 @@ /* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */ #define IRQ_CLEAR BIT(0) -/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */ -#define RCVR_DETECT BIT(0) - /* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */ #define CLAMP_EN BIT(0) /* enables i/o clamp_n */ @@ -96,31 +97,29 @@ enum qphy_reg_layout { QPHY_PCS_STATUS, QPHY_PCS_AUTONOMOUS_MODE_CTRL, QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR, - QPHY_PCS_LFPS_RXTERM_IRQ_STATUS, QPHY_PCS_POWER_DOWN_CONTROL, /* Keep last to ensure regs_layout arrays are properly initialized */ QPHY_LAYOUT_SIZE }; static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, - [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8, - [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc, - [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, + [QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR, }; static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x44, - [QPHY_PCS_STATUS] = 0x14, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL, /* In PCS_USB */ - [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x008, - [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR, }; static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = { @@ -311,6 +310,70 @@ static const struct qmp_phy_init_tbl qmp_v3_usb3_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), }; +static const struct qmp_phy_init_tbl sm6350_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75), +}; + +static const struct qmp_phy_init_tbl sm6350_usb3_pcs_tbl[] = { + /* FLL settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02), + + /* Lock Det settings */ + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0xcc), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V1, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x1d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_DET_HIGH_COUNT_VAL, 0x04), + + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_REFGEN_REQ_CONFIG2, 0x60), +}; + static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01), QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31), @@ -494,6 +557,223 @@ static const struct qmp_phy_init_tbl sm8250_usb3_pcs_usb_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), }; +static const struct qmp_phy_init_tbl sm8350_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_TX, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_RX, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x35), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_3, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_5, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x21), +}; + +static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_GAIN2, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbb), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0x7b), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbb), + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3d, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3c, 2), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x64), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xd2), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x13), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa9), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_AUX_DATA_TCOARSE_TFINE, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VTH_CODE, 0x10), +}; + +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10), +}; + +static const struct qmp_phy_init_tbl sm8350_usb3_pcs_usb_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00), + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_usb3_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE1, 0x25), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MSB_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE1_MODE0, 0x25), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE2_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1, 0xb6), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2, 0x4b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8550_usb3_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_TX, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_RX, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0xf5), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_3, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_5, 0x5f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RCV_DETECT_LVL_2, 0x12), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_TX_PI_QEC_CTRL, 0x21, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_TX_PI_QEC_CTRL, 0x05, 2), +}; + +static const struct qmp_phy_init_tbl sm8550_usb3_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_PI_CONTROLS, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_GAIN2, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL1, 0x54), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x13), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CNTRL, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1d), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_EN_TIMER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DCC_CTRL1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VTH_CODE, 0x10), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_CTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08), + + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xff, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xdf, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xed, 1), + + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_LOW, 0xbf, 2), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf, 2), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xbf, 2), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xdf, 2), + QMP_PHY_INIT_CFG_LANE(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xfd, 2), +}; + +static const struct qmp_phy_init_tbl sm8550_usb3_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2, 0x89), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3, 0x20), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6, 0x13), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1, 0x21), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RX_SIGDET_LVL, 0x99), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_CDR_RESET_TIME, 0x0a), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG, 0x0c), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG1, 0x4b), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_EQ_CONFIG5, 0x10), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1, 0x68), +}; + +static const struct qmp_phy_init_tbl sm8550_usb3_pcs_usb_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40), + QMP_PHY_INIT_CFG(QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00), +}; + static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05), QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b), @@ -600,6 +880,20 @@ static const struct qmp_phy_init_tbl qmp_v5_dp_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f), }; +static const struct qmp_phy_init_tbl qmp_v5_dp_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_TX_VMODE_CTRL1, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PRE_STALL_LDO_BOOST_EN, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_INTERFACE_SELECT, 0x3b), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_CLKBUF_ENABLE, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RESET_TSYNC_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TX_INTERFACE_MODE, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_TX_BAND, 0x04), +}; + static const struct qmp_phy_init_tbl qmp_v5_5nm_dp_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_5NM_TX_LANE_MODE_3, 0x51), QMP_PHY_INIT_CFG(QSERDES_V5_5NM_TX_TRANSCEIVER_BIAS_EN, 0x1a), @@ -615,6 +909,91 @@ static const struct qmp_phy_init_tbl qmp_v5_5nm_dp_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_5NM_TX_TX_BAND, 0x01), }; +static const struct qmp_phy_init_tbl qmp_v6_dp_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SVS_MODE_CLK_SEL, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x3b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_BUF_ENABLE, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_CTRL, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x17), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0x0f), +}; + +static const struct qmp_phy_init_tbl qmp_v6_dp_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_TX_VMODE_CTRL1, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_PRE_STALL_LDO_BOOST_EN, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_INTERFACE_SELECT, 0x3b), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_CLKBUF_ENABLE, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RESET_TSYNC_EN, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_TRAN_DRVR_EMP_EN, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_TX_INTERFACE_MODE, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_TX_BAND, 0x4), +}; + +static const struct qmp_phy_init_tbl qmp_v6_dp_serdes_tbl_rbr[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x37), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x71), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0c), +}; + +static const struct qmp_phy_init_tbl qmp_v6_dp_serdes_tbl_hbr[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x71), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0c), +}; + +static const struct qmp_phy_init_tbl qmp_v6_dp_serdes_tbl_hbr2[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x46), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x97), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x10), +}; + +static const struct qmp_phy_init_tbl qmp_v6_dp_serdes_tbl_hbr3[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xc0), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x17), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0x71), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x0c), +}; + static const struct qmp_phy_init_tbl sc8280xp_usb43dp_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01), QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31), @@ -768,6 +1147,27 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { { 0x1f, 0xff, 0xff, 0xff } }; +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = { + { 0x00, 0x0c, 0x15, 0x1b }, + { 0x02, 0x0e, 0x16, 0xff }, + { 0x02, 0x11, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = { + { 0x00, 0x0d, 0x14, 0x1a }, + { 0x00, 0x0e, 0x15, 0xff }, + { 0x00, 0x0d, 0xff, 0xff }, + { 0x03, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = { + { 0x08, 0x0f, 0x16, 0x1f }, + { 0x11, 0x1e, 0x1f, 0xff }, + { 0x16, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + static const u8 qmp_dp_v5_pre_emphasis_hbr3_hbr2[4][4] = { { 0x20, 0x2c, 0x35, 0x3b }, { 0x22, 0x2e, 0x36, 0xff }, @@ -796,6 +1196,13 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = { { 0x3f, 0xff, 0xff, 0xff } }; +static const u8 qmp_dp_v6_pre_emphasis_hbr_rbr[4][4] = { + { 0x20, 0x2d, 0x34, 0x3a }, + { 0x20, 0x2e, 0x35, 0xff }, + { 0x20, 0x2e, 0xff, 0xff }, + { 0x22, 0xff, 0xff, 0xff } +}; + struct qmp_combo; struct qmp_combo_offsets { @@ -809,6 +1216,8 @@ struct qmp_combo_offsets { u16 usb3_pcs; u16 usb3_pcs_usb; u16 dp_serdes; + u16 dp_txa; + u16 dp_txb; u16 dp_dp_phy; }; @@ -928,6 +1337,9 @@ static int qmp_v4_calibrate_dp_phy(struct qmp_combo *qmp); static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp); +static void qmp_v6_dp_aux_init(struct qmp_combo *qmp); +static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp); + static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) { u32 reg; @@ -975,6 +1387,21 @@ static const char * const sc7180_usb3phy_reset_l[] = { "phy", }; +static const struct qmp_combo_offsets qmp_combo_offsets_v3 = { + .com = 0x0000, + .txa = 0x1200, + .rxa = 0x1400, + .txb = 0x1600, + .rxb = 0x1800, + .usb3_serdes = 0x1000, + .usb3_pcs_misc = 0x1a00, + .usb3_pcs = 0x1c00, + .dp_serdes = 0x2000, + .dp_txa = 0x2200, + .dp_txb = 0x2600, + .dp_dp_phy = 0x2a00, +}; + static const struct qmp_combo_offsets qmp_combo_offsets_v5 = { .com = 0x0000, .txa = 0x0400, @@ -989,6 +1416,22 @@ static const struct qmp_combo_offsets qmp_combo_offsets_v5 = { .dp_dp_phy = 0x2200, }; +static const struct qmp_combo_offsets qmp_combo_offsets_v6 = { + .com = 0x0000, + .txa = 0x1200, + .rxa = 0x1400, + .txb = 0x1600, + .rxb = 0x1800, + .usb3_serdes = 0x1000, + .usb3_pcs_misc = 0x1a00, + .usb3_pcs = 0x1c00, + .usb3_pcs_usb = 0x1f00, + .dp_serdes = 0x2000, + .dp_txa = 0x2200, + .dp_txb = 0x2600, + .dp_dp_phy = 0x2a00, +}; + static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = { .serdes_tbl = qmp_v3_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), @@ -1172,6 +1615,51 @@ static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = { .regs = qmp_v4_usb3phy_regs_layout, }; +static const struct qmp_phy_cfg sm6350_usb3dpphy_cfg = { + .offsets = &qmp_combo_offsets_v3, + + .serdes_tbl = qmp_v3_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl), + .tx_tbl = qmp_v3_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_tx_tbl), + .rx_tbl = sm6350_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm6350_usb3_rx_tbl), + .pcs_tbl = sm6350_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm6350_usb3_pcs_tbl), + + .dp_serdes_tbl = qmp_v3_dp_serdes_tbl, + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl), + .dp_tx_tbl = qmp_v3_dp_tx_tbl, + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl), + + .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr, + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr), + .serdes_tbl_hbr = qmp_v3_dp_serdes_tbl_hbr, + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr), + .serdes_tbl_hbr2 = qmp_v3_dp_serdes_tbl_hbr2, + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr2), + .serdes_tbl_hbr3 = qmp_v3_dp_serdes_tbl_hbr3, + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_hbr3), + + .swing_hbr_rbr = &qmp_dp_v3_voltage_swing_hbr_rbr, + .pre_emphasis_hbr_rbr = &qmp_dp_v3_pre_emphasis_hbr_rbr, + .swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2, + .pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2, + + .dp_aux_init = qmp_v3_dp_aux_init, + .configure_dp_tx = qmp_v3_configure_dp_tx, + .configure_dp_phy = qmp_v3_configure_dp_phy, + .calibrate_dp_phy = qmp_v3_calibrate_dp_phy, + + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v3_usb3phy_regs_layout, +}; + static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = { .serdes_tbl = sm8150_usb3_serdes_tbl, .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), @@ -1220,6 +1708,102 @@ static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = { .has_pwrdn_delay = true, }; +static const struct qmp_phy_cfg sm8350_usb3dpphy_cfg = { + .offsets = &qmp_combo_offsets_v3, + + .serdes_tbl = sm8150_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl), + .tx_tbl = sm8350_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8350_usb3_tx_tbl), + .rx_tbl = sm8350_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl), + .pcs_tbl = sm8350_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl), + .pcs_usb_tbl = sm8350_usb3_pcs_usb_tbl, + .pcs_usb_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_usb_tbl), + + .dp_serdes_tbl = qmp_v4_dp_serdes_tbl, + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl), + .dp_tx_tbl = qmp_v5_dp_tx_tbl, + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v5_dp_tx_tbl), + + .serdes_tbl_rbr = qmp_v4_dp_serdes_tbl_rbr, + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr), + .serdes_tbl_hbr = qmp_v4_dp_serdes_tbl_hbr, + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr), + .serdes_tbl_hbr2 = qmp_v4_dp_serdes_tbl_hbr2, + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2), + .serdes_tbl_hbr3 = qmp_v4_dp_serdes_tbl_hbr3, + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3), + + .swing_hbr_rbr = &qmp_dp_v4_voltage_swing_hbr_rbr, + .pre_emphasis_hbr_rbr = &qmp_dp_v4_pre_emphasis_hbr_rbr, + .swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2, + .pre_emphasis_hbr3_hbr2 = &qmp_dp_v4_pre_emphasis_hbr3_hbr2, + + .dp_aux_init = qmp_v4_dp_aux_init, + .configure_dp_tx = qmp_v4_configure_dp_tx, + .configure_dp_phy = qmp_v4_configure_dp_phy, + .calibrate_dp_phy = qmp_v4_calibrate_dp_phy, + + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = qmp_v4_usb3phy_regs_layout, + + .has_pwrdn_delay = true, +}; + +static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = { + .offsets = &qmp_combo_offsets_v6, + + .serdes_tbl = sm8550_usb3_serdes_tbl, + .serdes_tbl_num = ARRAY_SIZE(sm8550_usb3_serdes_tbl), + .tx_tbl = sm8550_usb3_tx_tbl, + .tx_tbl_num = ARRAY_SIZE(sm8550_usb3_tx_tbl), + .rx_tbl = sm8550_usb3_rx_tbl, + .rx_tbl_num = ARRAY_SIZE(sm8550_usb3_rx_tbl), + .pcs_tbl = sm8550_usb3_pcs_tbl, + .pcs_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_tbl), + .pcs_usb_tbl = sm8550_usb3_pcs_usb_tbl, + .pcs_usb_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl), + + .dp_serdes_tbl = qmp_v6_dp_serdes_tbl, + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl), + .dp_tx_tbl = qmp_v6_dp_tx_tbl, + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v6_dp_tx_tbl), + + .serdes_tbl_rbr = qmp_v6_dp_serdes_tbl_rbr, + .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr), + .serdes_tbl_hbr = qmp_v6_dp_serdes_tbl_hbr, + .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr), + .serdes_tbl_hbr2 = qmp_v6_dp_serdes_tbl_hbr2, + .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2), + .serdes_tbl_hbr3 = qmp_v6_dp_serdes_tbl_hbr3, + .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3), + + .swing_hbr_rbr = &qmp_dp_v5_voltage_swing_hbr_rbr, + .pre_emphasis_hbr_rbr = &qmp_dp_v6_pre_emphasis_hbr_rbr, + .swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2, + .pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2, + + .dp_aux_init = qmp_v6_dp_aux_init, + .configure_dp_tx = qmp_v4_configure_dp_tx, + .configure_dp_phy = qmp_v6_configure_dp_phy, + .calibrate_dp_phy = qmp_v4_calibrate_dp_phy, + + .regs = qmp_v4_usb3phy_regs_layout, + .clk_list = qmp_v4_phy_clk_l, + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), + .reset_list = msm8996_usb3phy_reset_l, + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), +}; + static void qmp_combo_configure_lane(void __iomem *base, const struct qmp_phy_init_tbl tbl[], int num, @@ -1530,6 +2114,33 @@ static void qmp_v4_dp_aux_init(struct qmp_combo *qmp) qmp->dp_dp_phy + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK); } +static void qmp_v6_dp_aux_init(struct qmp_combo *qmp) +{ + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | + DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, + qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL); + + /* Turn on BIAS current for PHY/PLL */ + writel(0x17, qmp->dp_serdes + QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN); + + writel(0x00, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG0); + writel(0x13, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG1); + writel(0xa4, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG2); + writel(0x00, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG3); + writel(0x0a, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG4); + writel(0x26, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG5); + writel(0x0a, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG6); + writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG7); + writel(0xb7, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG8); + writel(0x03, qmp->dp_dp_phy + QSERDES_DP_PHY_AUX_CFG9); + qmp->dp_aux_cfg = 0; + + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK | + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK | + PHY_AUX_REQ_ERR_MASK, + qmp->dp_dp_phy + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK); +} + static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp) { /* Program default values before writing proper values */ @@ -1543,7 +2154,10 @@ static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp) QSERDES_V4_TX_TX_EMP_POST1_LVL); } -static int qmp_v45_configure_dp_phy(struct qmp_combo *qmp) +static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp, + unsigned int com_resetm_ctrl_reg, + unsigned int com_c_ready_status_reg, + unsigned int dp_phy_status_reg) { const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts; u32 phy_vco_div, status; @@ -1590,9 +2204,9 @@ static int qmp_v45_configure_dp_phy(struct qmp_combo *qmp) writel(0x01, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG); writel(0x09, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG); - writel(0x20, qmp->dp_serdes + QSERDES_V4_COM_RESETSM_CNTRL); + writel(0x20, qmp->dp_serdes + com_resetm_ctrl_reg); - if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_C_READY_STATUS, + if (readl_poll_timeout(qmp->dp_serdes + com_c_ready_status_reg, status, ((status & BIT(0)) > 0), 500, @@ -1615,14 +2229,14 @@ static int qmp_v45_configure_dp_phy(struct qmp_combo *qmp) writel(0x19, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG); - if (readl_poll_timeout(qmp->dp_dp_phy + QSERDES_V4_DP_PHY_STATUS, + if (readl_poll_timeout(qmp->dp_dp_phy + dp_phy_status_reg, status, ((status & BIT(0)) > 0), 500, 10000)) return -ETIMEDOUT; - if (readl_poll_timeout(qmp->dp_dp_phy + QSERDES_V4_DP_PHY_STATUS, + if (readl_poll_timeout(qmp->dp_dp_phy + dp_phy_status_reg, status, ((status & BIT(1)) > 0), 500, @@ -1640,7 +2254,9 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp) u32 status; int ret; - ret = qmp_v45_configure_dp_phy(qmp); + ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL, + QSERDES_V4_COM_C_READY_STATUS, + QSERDES_V4_DP_PHY_STATUS); if (ret < 0) return ret; @@ -1702,7 +2318,9 @@ static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp) u32 status; int ret; - ret = qmp_v45_configure_dp_phy(qmp); + ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL, + QSERDES_V4_COM_C_READY_STATUS, + QSERDES_V4_DP_PHY_STATUS); if (ret < 0) return ret; @@ -1751,6 +2369,65 @@ static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp) return 0; } +static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp) +{ + const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts; + u32 bias0_en, drvr0_en, bias1_en, drvr1_en; + bool reverse = false; + u32 status; + int ret; + + ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V6_COM_RESETSM_CNTRL, + QSERDES_V6_COM_C_READY_STATUS, + QSERDES_V6_DP_PHY_STATUS); + if (ret < 0) + return ret; + + if (dp_opts->lanes == 1) { + bias0_en = reverse ? 0x3e : 0x1a; + drvr0_en = reverse ? 0x13 : 0x10; + bias1_en = reverse ? 0x15 : 0x3e; + drvr1_en = reverse ? 0x10 : 0x13; + } else if (dp_opts->lanes == 2) { + bias0_en = reverse ? 0x3f : 0x15; + drvr0_en = 0x10; + bias1_en = reverse ? 0x15 : 0x3f; + drvr1_en = 0x10; + } else { + bias0_en = 0x3f; + bias1_en = 0x3f; + drvr0_en = 0x10; + drvr1_en = 0x10; + } + + writel(drvr0_en, qmp->dp_tx + QSERDES_V4_TX_HIGHZ_DRVR_EN); + writel(bias0_en, qmp->dp_tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + writel(drvr1_en, qmp->dp_tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); + writel(bias1_en, qmp->dp_tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + + writel(0x18, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG); + udelay(2000); + writel(0x19, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG); + + if (readl_poll_timeout(qmp->dp_dp_phy + QSERDES_V6_DP_PHY_STATUS, + status, + ((status & BIT(1)) > 0), + 500, + 10000)) + return -ETIMEDOUT; + + writel(0x0a, qmp->dp_tx + QSERDES_V4_TX_TX_POL_INV); + writel(0x0a, qmp->dp_tx2 + QSERDES_V4_TX_TX_POL_INV); + + writel(0x27, qmp->dp_tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x27, qmp->dp_tx2 + QSERDES_V4_TX_TX_DRV_LVL); + + writel(0x20, qmp->dp_tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); + writel(0x20, qmp->dp_tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); + + return 0; +} + /* * We need to calibrate the aux setting here as many times * as the caller tries @@ -2641,8 +3318,13 @@ static int qmp_combo_parse_dt(struct qmp_combo *qmp) qmp->pcs_usb = base + offs->usb3_pcs_usb; qmp->dp_serdes = base + offs->dp_serdes; - qmp->dp_tx = base + offs->txa; - qmp->dp_tx2 = base + offs->txb; + if (offs->dp_txa) { + qmp->dp_tx = base + offs->dp_txa; + qmp->dp_tx2 = base + offs->dp_txb; + } else { + qmp->dp_tx = base + offs->txa; + qmp->dp_tx2 = base + offs->txb; + } qmp->dp_dp_phy = base + offs->dp_dp_phy; qmp->pipe_clk = devm_clk_get(dev, "usb3_pipe"); @@ -2790,9 +3472,25 @@ static const struct of_device_id qmp_combo_of_match_table[] = { .data = &sdm845_usb3dpphy_cfg, }, { + .compatible = "qcom,sm6350-qmp-usb3-dp-phy", + .data = &sm6350_usb3dpphy_cfg, + }, + { .compatible = "qcom,sm8250-qmp-usb3-dp-phy", .data = &sm8250_usb3dpphy_cfg, }, + { + .compatible = "qcom,sm8350-qmp-usb3-dp-phy", + .data = &sm8350_usb3dpphy_cfg, + }, + { + .compatible = "qcom,sm8450-qmp-usb3-dp-phy", + .data = &sm8350_usb3dpphy_cfg, + }, + { + .compatible = "qcom,sm8550-qmp-usb3-dp-phy", + .data = &sm8550_usb3dpphy_cfg, + }, { } }; MODULE_DEVICE_TABLE(of, qmp_combo_of_match_table); diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c index a088477e274f..09824be088c9 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c @@ -84,9 +84,9 @@ static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_COM_POWER_DOWN_CONTROL] = 0x404, [QPHY_COM_START_CONTROL] = 0x408, [QPHY_COM_PCS_READY_STATUS] = 0x448, - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, + [QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V2_PCS_PCI_PCS_STATUS, }; static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = { diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c index 1b136a87053f..5182aeac43ee 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c @@ -24,6 +24,14 @@ #include <linux/slab.h> #include "phy-qcom-qmp.h" +#include "phy-qcom-qmp-pcs-misc-v3.h" +#include "phy-qcom-qmp-pcs-pcie-v4.h" +#include "phy-qcom-qmp-pcs-pcie-v4_20.h" +#include "phy-qcom-qmp-pcs-pcie-v5.h" +#include "phy-qcom-qmp-pcs-pcie-v5_20.h" +#include "phy-qcom-qmp-pcs-pcie-v6.h" +#include "phy-qcom-qmp-pcs-pcie-v6_20.h" +#include "phy-qcom-qmp-pcie-qhp.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) @@ -74,25 +82,18 @@ enum qphy_reg_layout { QPHY_LAYOUT_SIZE }; -static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x44, - [QPHY_PCS_STATUS] = 0x14, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, +static const unsigned int pciephy_v2_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V2_PCS_PCI_PCS_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_POWER_DOWN_CONTROL, }; -static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, -}; - -static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, +static const unsigned int pciephy_v3_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL, }; static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { @@ -102,11 +103,18 @@ static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, }; -static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x44, - [QPHY_PCS_STATUS] = 0x14, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, +static const unsigned int pciephy_v4_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL, +}; + +static const unsigned int pciephy_v5_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL, }; static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = { @@ -1216,7 +1224,7 @@ static const struct qmp_phy_init_tbl sdx55_qmp_pcie_pcs_misc_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_20_PCS_LANE1_INSIG_MX_CTRL2, 0x00), }; -static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = { +static const struct qmp_phy_init_tbl sm8450_qmp_gen3_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0x08), QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_SELECT, 0x34), QMP_PHY_INIT_CFG(QSERDES_V5_COM_CORECLK_DIV_MODE1, 0x08), @@ -1250,7 +1258,6 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca), QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x18), QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xa2), - QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07), QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_EN_CENTER, 0x01), QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER1, 0x31), QMP_PHY_INIT_CFG(QSERDES_V5_COM_SSC_PER2, 0x01), @@ -1261,6 +1268,10 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_CLK_ENABLE1, 0x90), }; +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rc_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_BUF_ENABLE, 0x07), +}; + static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20), QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75), @@ -1269,11 +1280,9 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x04), }; -static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = { +static const struct qmp_phy_init_tbl sm8450_qmp_gen3_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xff), - QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf), - QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0xd8), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0xdc), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0xdc), @@ -1281,20 +1290,25 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH3, 0x34), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0xa6), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH3, 0x34), - QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38), - QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07), QMP_PHY_INIT_CFG(QSERDES_V5_RX_GM_CAL, 0x00), QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH1, 0x08), QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SB2_THRESH2, 0x08), - QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0), QMP_PHY_INIT_CFG(QSERDES_V5_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), QMP_PHY_INIT_CFG(QSERDES_V5_RX_TX_ADAPT_POST_THRESH, 0xf0), +}; + +static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_rc_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_10_HIGH4, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0), QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07), QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_FO_GAIN, 0x09), QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_SO_GAIN, 0x05), }; -static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_tbl[] = { +static const struct qmp_phy_init_tbl sm8450_qmp_gen3_pcie_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_RX_SIGDET_LVL, 0x77), QMP_PHY_INIT_CFG(QPHY_V5_PCS_RATE_SLEW_CNTRL1, 0x0b), QMP_PHY_INIT_CFG(QPHY_V5_PCS_REFGEN_REQ_CONFIG1, 0x05), @@ -1307,6 +1321,40 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen3x1_pcie_pcs_misc_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), }; +static const struct qmp_phy_init_tbl sm8350_qmp_gen3x1_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_TX_PI_QEC_CTRL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0x75), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1d), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8350_qmp_gen3x1_pcie_rc_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CONTROLS, 0xf0), +}; + +static const struct qmp_phy_init_tbl sm8350_qmp_gen3x2_pcie_rc_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_VGA_CAL_CNTRL2, 0x0f), +}; + +static const struct qmp_phy_init_tbl sm8350_qmp_gen3x2_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_TX_PI_QEC_CTRL, 0x02, 1), + QMP_PHY_INIT_CFG_LANE(QSERDES_V5_TX_PI_QEC_CTRL, 0x04, 2), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xd5), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_4, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_TX, 0x1d), + QMP_PHY_INIT_CFG(QSERDES_V5_TX_RES_CODE_LANE_OFFSET_RX, 0x0c), +}; + +static const struct qmp_phy_init_tbl sm8350_qmp_gen3x2_pcie_rc_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V5_PCS_EQ_CONFIG2, 0x0f), +}; + static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIAS_EN_CLKBUFLR_EN, 0x14), QMP_PHY_INIT_CFG(QSERDES_V5_COM_PLL_IVCO, 0x0f), @@ -1458,6 +1506,234 @@ static const struct qmp_phy_init_tbl sm8450_qmp_gen4x2_pcie_ep_pcs_misc_tbl[] = QMP_PHY_INIT_CFG(QPHY_V5_20_PCS_PCIE_OSC_DTCT_MODE2_CONFIG5, 0x08), }; +static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xf8), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x93), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x90), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x42), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0d), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xaa), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0x55), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_ADDITIONAL_MISC_3, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x15), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_4, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_PI_QEC_CTRL, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x18), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_GM_CAL, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH2, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH3, 0xb7), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_HIGH4, 0xea), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_00_LOW, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH, 0x5c), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH2, 0x9c), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH3, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_HIGH4, 0x89), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_01_LOW, 0xdc), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH, 0x94), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH2, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH3, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_MODE_10_HIGH4, 0x89), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_TX_ADAPT_POST_THRESH, 0xf0), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_FO_GAIN, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SO_GAIN, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH1, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_UCDR_SB2_THRESH2, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_VGA_CAL_CNTRL2, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIDGET_ENABLES, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V6_RX_SIGDET_CAL_TRIM, 0x08), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_REFGEN_REQ_CONFIG1, 0x05), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_RX_SIGDET_LVL, 0x77), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_RATE_SLEW_CNTRL1, 0x0b), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG2, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_PCS_TX_RX_CONFIG, 0x8c), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen3x2_pcie_pcs_misc_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2, 0x1d), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4, 0x07), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE, 0xc1), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS, 0x00), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_serdes_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1, 0x26), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE1, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORECLK_DIV_MODE1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE1, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x68), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE1, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE1, 0xaa), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE1, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0, 0xf8), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x36), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x0d), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START1_MODE0, 0xab), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START2_MODE0, 0xaa), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DIV_FRAC_START3_MODE0, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_BG_TIMER, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_EN_CENTER, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER1, 0x62), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SSC_PER2, 0x02), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_POST_DIV_MUX, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_ENABLE1, 0x90), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYS_CLK_CTRL, 0x82), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x46), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_CFG, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CLK_SELECT, 0x34), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CORE_CLK_EN, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_MISC_1, 0x88), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_MODE, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL, 0x0f), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_ln_shrd_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_Q_EN_RATES, 0xe), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1, 0x12), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3, 0x9a), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4, 0x38), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5, 0xb6), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6, 0x64), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3, 0x1f), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_tx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX, 0x1d), + QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX, 0x03), + QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_1, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_LANE_MODE_3, 0x51), + QMP_PHY_INIT_CFG(QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN, 0x34), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_rx_tbl[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_PI_CONTROLS, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_CAL_CTRL2, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET, 0x7c), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_3, 0x05), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_VGA_CAL_MAN_VAL, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_GM_CAL, 0x0d), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_SIGDET_ENABLES, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_PHPRE_CTRL, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET, 0x30), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B1, 0xb3), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B2, 0x58), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B3, 0x9a), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B4, 0x26), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B5, 0xb6), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE2_B6, 0xee), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B0, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B1, 0xdb), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B2, 0xa0), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B3, 0xdf), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B4, 0x78), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B5, 0x76), + QMP_PHY_INIT_CFG(QSERDES_V6_20_RX_MODE_RATE3_B6, 0xff), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_G3S2_PRE_GAIN, 0x2e), + QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL, 0x25), + QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_EQ_CONFIG4, 0x00), + QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_EQ_CONFIG5, 0x22), + QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_TX_RX_CONFIG1, 0x04), + QMP_PHY_INIT_CFG(QPHY_V6_20_PCS_TX_RX_CONFIG2, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_qmp_gen4x2_pcie_pcs_misc_tbl[] = { + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE, 0xc1), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS, 0x00), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_EQ_CONFIG1, 0x16), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_EQ_CONFIG5, 0x02), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN, 0x2e), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1, 0x03), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3, 0x28), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG, 0xc0), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2, 0x1d), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5, 0x0f), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5, 0xf2), + QMP_PHY_INIT_CFG(QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5, 0xf2), +}; + struct qmp_pcie_offsets { u16 serdes; u16 pcs; @@ -1466,6 +1742,7 @@ struct qmp_pcie_offsets { u16 rx; u16 tx2; u16 rx2; + u16 ln_shrd; }; struct qmp_phy_cfg_tbls { @@ -1479,6 +1756,8 @@ struct qmp_phy_cfg_tbls { int pcs_num; const struct qmp_phy_init_tbl *pcs_misc; int pcs_misc_num; + const struct qmp_phy_init_tbl *ln_shrd; + int ln_shrd_num; }; /* struct qmp_phy_cfg - per-PHY initialization config */ @@ -1521,6 +1800,8 @@ struct qmp_phy_cfg { bool skip_start_delay; + bool has_nocsr_reset; + /* QMP PHY pipe clock interface rate */ unsigned long pipe_clock_rate; }; @@ -1538,6 +1819,7 @@ struct qmp_pcie { void __iomem *rx; void __iomem *tx2; void __iomem *rx2; + void __iomem *ln_shrd; void __iomem *port_b; @@ -1546,6 +1828,7 @@ struct qmp_pcie { int num_pipe_clks; struct reset_control_bulk_data *resets; + struct reset_control *nocsr_reset; struct regulator_bulk_data *vregs; struct phy *phy; @@ -1600,6 +1883,10 @@ static const char * const qmp_phy_vreg_l[] = { "vdda-phy", "vdda-pll", }; +static const char * const sm8550_qmp_phy_vreg_l[] = { + "vdda-phy", "vdda-pll", "vdda-qref", +}; + /* list of resets */ static const char * const ipq8074_pciephy_reset_l[] = { "phy", "common", @@ -1619,6 +1906,17 @@ static const struct qmp_pcie_offsets qmp_pcie_offsets_v5 = { .rx2 = 0x1800, }; +static const struct qmp_pcie_offsets qmp_pcie_offsets_v6_20 = { + .serdes = 0x1000, + .pcs = 0x1200, + .pcs_misc = 0x1400, + .tx = 0x0000, + .rx = 0x0200, + .tx2 = 0x0800, + .rx2 = 0x0a00, + .ln_shrd = 0x0e00, +}; + static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .lanes = 1, @@ -1638,7 +1936,7 @@ static const struct qmp_phy_cfg ipq8074_pciephy_cfg = { .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, .num_vregs = 0, - .regs = pciephy_regs_layout, + .regs = pciephy_v2_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1665,7 +1963,7 @@ static const struct qmp_phy_cfg ipq8074_pciephy_gen3_cfg = { .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, .num_vregs = 0, - .regs = ipq_pciephy_gen3_regs_layout, + .regs = pciephy_v4_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1694,7 +1992,7 @@ static const struct qmp_phy_cfg ipq6018_pciephy_cfg = { .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = NULL, .num_vregs = 0, - .regs = ipq_pciephy_gen3_regs_layout, + .regs = pciephy_v4_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1721,7 +2019,7 @@ static const struct qmp_phy_cfg sdm845_qmp_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sdm845_qmp_pciephy_regs_layout, + .regs = pciephy_v3_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1783,7 +2081,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v4_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1820,7 +2118,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v4_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1845,7 +2143,7 @@ static const struct qmp_phy_cfg msm8998_pciephy_cfg = { .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = pciephy_regs_layout, + .regs = pciephy_v3_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1874,7 +2172,7 @@ static const struct qmp_phy_cfg sc8180x_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v4_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1909,7 +2207,7 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x1_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v5_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1944,7 +2242,7 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x2_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v5_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -1982,7 +2280,7 @@ static const struct qmp_phy_cfg sc8280xp_qmp_gen3x4_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v5_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -2009,34 +2307,116 @@ static const struct qmp_phy_cfg sdx55_qmp_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v4_regs_layout, .pwrdn_ctrl = SW_PWRDN, .phy_status = PHYSTATUS_4_20, }; +static const struct qmp_phy_cfg sm8350_qmp_gen3x1_pciephy_cfg = { + .lanes = 1, + + .offsets = &qmp_pcie_offsets_v5, + + .tbls = { + .serdes = sm8450_qmp_gen3_pcie_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_serdes_tbl), + .tx = sm8350_qmp_gen3x1_pcie_tx_tbl, + .tx_num = ARRAY_SIZE(sm8350_qmp_gen3x1_pcie_tx_tbl), + .rx = sm8450_qmp_gen3_pcie_rx_tbl, + .rx_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_rx_tbl), + .pcs = sm8450_qmp_gen3_pcie_pcs_tbl, + .pcs_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_pcs_tbl), + .pcs_misc = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl, + .pcs_misc_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl), + }, + + .tbls_rc = &(const struct qmp_phy_cfg_tbls) { + .serdes = sm8450_qmp_gen3x1_pcie_rc_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rc_serdes_tbl), + .rx = sm8350_qmp_gen3x1_pcie_rc_rx_tbl, + .rx_num = ARRAY_SIZE(sm8350_qmp_gen3x1_pcie_rc_rx_tbl), + }, + + .clk_list = sc8280xp_pciephy_clk_l, + .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l), + .reset_list = sdm845_pciephy_reset_l, + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = pciephy_v5_regs_layout, + + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .phy_status = PHYSTATUS, +}; + +static const struct qmp_phy_cfg sm8350_qmp_gen3x2_pciephy_cfg = { + .lanes = 2, + + .offsets = &qmp_pcie_offsets_v5, + + .tbls = { + .serdes = sm8450_qmp_gen3_pcie_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_serdes_tbl), + .tx = sm8350_qmp_gen3x2_pcie_tx_tbl, + .tx_num = ARRAY_SIZE(sm8350_qmp_gen3x2_pcie_tx_tbl), + .rx = sm8450_qmp_gen3_pcie_rx_tbl, + .rx_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_rx_tbl), + .pcs = sm8450_qmp_gen3_pcie_pcs_tbl, + .pcs_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_pcs_tbl), + .pcs_misc = sc8280xp_qmp_gen3x2_pcie_pcs_misc_tbl, + .pcs_misc_num = ARRAY_SIZE(sc8280xp_qmp_gen3x2_pcie_pcs_misc_tbl), + }, + + .tbls_rc = &(const struct qmp_phy_cfg_tbls) { + .rx = sm8350_qmp_gen3x2_pcie_rc_rx_tbl, + .rx_num = ARRAY_SIZE(sm8350_qmp_gen3x2_pcie_rc_rx_tbl), + .pcs = sm8350_qmp_gen3x2_pcie_rc_pcs_tbl, + .pcs_num = ARRAY_SIZE(sm8350_qmp_gen3x2_pcie_rc_pcs_tbl), + }, + + .clk_list = sc8280xp_pciephy_clk_l, + .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l), + .reset_list = sdm845_pciephy_reset_l, + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = pciephy_v5_regs_layout, + + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .phy_status = PHYSTATUS, +}; + static const struct qmp_phy_cfg sm8450_qmp_gen3x1_pciephy_cfg = { .lanes = 1, .tbls = { - .serdes = sm8450_qmp_gen3x1_pcie_serdes_tbl, - .serdes_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_serdes_tbl), + .serdes = sm8450_qmp_gen3_pcie_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_serdes_tbl), .tx = sm8450_qmp_gen3x1_pcie_tx_tbl, .tx_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_tx_tbl), - .rx = sm8450_qmp_gen3x1_pcie_rx_tbl, - .rx_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rx_tbl), - .pcs = sm8450_qmp_gen3x1_pcie_pcs_tbl, - .pcs_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_tbl), + .rx = sm8450_qmp_gen3_pcie_rx_tbl, + .rx_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_rx_tbl), + .pcs = sm8450_qmp_gen3_pcie_pcs_tbl, + .pcs_num = ARRAY_SIZE(sm8450_qmp_gen3_pcie_pcs_tbl), .pcs_misc = sm8450_qmp_gen3x1_pcie_pcs_misc_tbl, .pcs_misc_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_pcs_misc_tbl), }, + + .tbls_rc = &(const struct qmp_phy_cfg_tbls) { + .serdes = sm8450_qmp_gen3x1_pcie_rc_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rc_serdes_tbl), + .rx = sm8450_qmp_gen3x1_pcie_rc_rx_tbl, + .rx_num = ARRAY_SIZE(sm8450_qmp_gen3x1_pcie_rc_rx_tbl), + }, + .clk_list = sdm845_pciephy_clk_l, .num_clks = ARRAY_SIZE(sdm845_pciephy_clk_l), .reset_list = sdm845_pciephy_reset_l, .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v5_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS, @@ -2078,12 +2458,73 @@ static const struct qmp_phy_cfg sm8450_qmp_gen4x2_pciephy_cfg = { .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8250_pcie_regs_layout, + .regs = pciephy_v5_regs_layout, .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, .phy_status = PHYSTATUS_4_20, }; +static const struct qmp_phy_cfg sm8550_qmp_gen3x2_pciephy_cfg = { + .lanes = 2, + + .offsets = &qmp_pcie_offsets_v5, + + .tbls = { + .serdes = sm8550_qmp_gen3x2_pcie_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_serdes_tbl), + .tx = sm8550_qmp_gen3x2_pcie_tx_tbl, + .tx_num = ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_tx_tbl), + .rx = sm8550_qmp_gen3x2_pcie_rx_tbl, + .rx_num = ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_rx_tbl), + .pcs = sm8550_qmp_gen3x2_pcie_pcs_tbl, + .pcs_num = ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_tbl), + .pcs_misc = sm8550_qmp_gen3x2_pcie_pcs_misc_tbl, + .pcs_misc_num = ARRAY_SIZE(sm8550_qmp_gen3x2_pcie_pcs_misc_tbl), + }, + .clk_list = sc8280xp_pciephy_clk_l, + .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l), + .reset_list = sdm845_pciephy_reset_l, + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = pciephy_v5_regs_layout, + + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .phy_status = PHYSTATUS, +}; + +static const struct qmp_phy_cfg sm8550_qmp_gen4x2_pciephy_cfg = { + .lanes = 2, + + .offsets = &qmp_pcie_offsets_v6_20, + + .tbls = { + .serdes = sm8550_qmp_gen4x2_pcie_serdes_tbl, + .serdes_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_serdes_tbl), + .tx = sm8550_qmp_gen4x2_pcie_tx_tbl, + .tx_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_tx_tbl), + .rx = sm8550_qmp_gen4x2_pcie_rx_tbl, + .rx_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_rx_tbl), + .pcs = sm8550_qmp_gen4x2_pcie_pcs_tbl, + .pcs_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_tbl), + .pcs_misc = sm8550_qmp_gen4x2_pcie_pcs_misc_tbl, + .pcs_misc_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_pcs_misc_tbl), + .ln_shrd = sm8550_qmp_gen4x2_pcie_ln_shrd_tbl, + .ln_shrd_num = ARRAY_SIZE(sm8550_qmp_gen4x2_pcie_ln_shrd_tbl), + }, + .clk_list = sc8280xp_pciephy_clk_l, + .num_clks = ARRAY_SIZE(sc8280xp_pciephy_clk_l), + .reset_list = sdm845_pciephy_reset_l, + .num_resets = ARRAY_SIZE(sdm845_pciephy_reset_l), + .vreg_list = sm8550_qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(sm8550_qmp_phy_vreg_l), + .regs = pciephy_v5_regs_layout, + + .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL, + .phy_status = PHYSTATUS_4_20, + .has_nocsr_reset = true, +}; + static void qmp_pcie_configure_lane(void __iomem *base, const struct qmp_phy_init_tbl tbl[], int num, @@ -2138,6 +2579,7 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c void __iomem *rx2 = qmp->rx2; void __iomem *pcs = qmp->pcs; void __iomem *pcs_misc = qmp->pcs_misc; + void __iomem *ln_shrd = qmp->ln_shrd; if (!tbls) return; @@ -2159,6 +2601,8 @@ static void qmp_pcie_init_registers(struct qmp_pcie *qmp, const struct qmp_phy_c qmp_pcie_configure(serdes, cfg->serdes_4ln_tbl, cfg->serdes_4ln_num); qmp_pcie_init_port_b(qmp, tbls); } + + qmp_pcie_configure(ln_shrd, tbls->ln_shrd, tbls->ln_shrd_num); } static int qmp_pcie_init(struct phy *phy) @@ -2179,12 +2623,18 @@ static int qmp_pcie_init(struct phy *phy) goto err_disable_regulators; } + ret = reset_control_assert(qmp->nocsr_reset); + if (ret) { + dev_err(qmp->dev, "no-csr reset assert failed\n"); + goto err_assert_reset; + } + usleep_range(200, 300); ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets); if (ret) { dev_err(qmp->dev, "reset deassert failed\n"); - goto err_disable_regulators; + goto err_assert_reset; } ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks); @@ -2240,6 +2690,12 @@ static int qmp_pcie_power_on(struct phy *phy) if (ret) return ret; + ret = reset_control_deassert(qmp->nocsr_reset); + if (ret) { + dev_err(qmp->dev, "no-csr reset deassert failed\n"); + goto err_disable_pipe_clk; + } + /* Pull PHY out of reset state */ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET); @@ -2373,6 +2829,13 @@ static int qmp_pcie_reset_init(struct qmp_pcie *qmp) if (ret) return dev_err_probe(dev, ret, "failed to get resets\n"); + if (cfg->has_nocsr_reset) { + qmp->nocsr_reset = devm_reset_control_get_exclusive(dev, "phy_nocsr"); + if (IS_ERR(qmp->nocsr_reset)) + return dev_err_probe(dev, PTR_ERR(qmp->nocsr_reset), + "failed to get no-csr reset\n"); + } + return 0; } @@ -2595,11 +3058,18 @@ static int qmp_pcie_parse_dt(struct qmp_pcie *qmp) return PTR_ERR(qmp->port_b); } + if (cfg->tbls.ln_shrd) + qmp->ln_shrd = base + offs->ln_shrd; + qmp->num_pipe_clks = 2; qmp->pipe_clks[0].id = "pipe"; qmp->pipe_clks[1].id = "pipediv2"; - ret = devm_clk_bulk_get(dev, qmp->num_pipe_clks, qmp->pipe_clks); + ret = devm_clk_bulk_get(dev, 1, qmp->pipe_clks); + if (ret) + return ret; + + ret = devm_clk_bulk_get_optional(dev, qmp->num_pipe_clks - 1, qmp->pipe_clks + 1); if (ret) return ret; @@ -2720,11 +3190,23 @@ static const struct of_device_id qmp_pcie_of_match_table[] = { .compatible = "qcom,sm8250-qmp-modem-pcie-phy", .data = &sm8250_qmp_gen3x2_pciephy_cfg, }, { + .compatible = "qcom,sm8350-qmp-gen3x1-pcie-phy", + .data = &sm8350_qmp_gen3x1_pciephy_cfg, + }, { + .compatible = "qcom,sm8350-qmp-gen3x2-pcie-phy", + .data = &sm8350_qmp_gen3x2_pciephy_cfg, + }, { .compatible = "qcom,sm8450-qmp-gen3x1-pcie-phy", .data = &sm8450_qmp_gen3x1_pciephy_cfg, }, { .compatible = "qcom,sm8450-qmp-gen4x2-pcie-phy", .data = &sm8450_qmp_gen4x2_pciephy_cfg, + }, { + .compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy", + .data = &sm8550_qmp_gen3x2_pciephy_cfg, + }, { + .compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy", + .data = &sm8550_qmp_gen4x2_pciephy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h new file mode 100644 index 000000000000..91e70002eb47 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_H_ +#define QCOM_PHY_QMP_PCS_PCIE_V6_H_ + +/* Only for QMP V6 PHY - PCIE have different offsets than V5 */ +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2 0x0c +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4 0x14 +#define QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20 +#define QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS 0x94 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h new file mode 100644 index 000000000000..e3eb08776339 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_20_H_ +#define QCOM_PHY_QMP_PCS_PCIE_V6_20_H_ + +/* Only for QMP V6_20 PHY - PCIE have different offsets than V5 */ +#define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2 0x00c +#define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG 0x018 +#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE 0x01c +#define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS 0x090 +#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1 0x0a0 +#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5 0x108 +#define QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN 0x15c +#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1 0x17c +#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3 0x184 +#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5 0x18c +#define QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5 0x1ac +#define QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5 0x1c0 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h new file mode 100644 index 000000000000..a0803a8783d2 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v2.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_PCS_UFS_V2_H_ +#define QCOM_PHY_QMP_PCS_UFS_V2_H_ + +#define QPHY_V2_PCS_UFS_PHY_START 0x000 +#define QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL 0x004 + +#define QPHY_V2_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x034 +#define QPHY_V2_PCS_UFS_TX_LARGE_AMP_POST_EMP_LVL 0x038 +#define QPHY_V2_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x03c +#define QPHY_V2_PCS_UFS_TX_SMALL_AMP_POST_EMP_LVL 0x040 + +#define QPHY_V2_PCS_UFS_RX_MIN_STALL_NOCONFIG_TIME_CAP 0x0cc +#define QPHY_V2_PCS_UFS_RX_SYM_RESYNC_CTRL 0x13c +#define QPHY_V2_PCS_UFS_RX_MIN_HIBERN8_TIME 0x140 +#define QPHY_V2_PCS_UFS_RX_SIGDET_CTRL2 0x148 +#define QPHY_V2_PCS_UFS_RX_PWM_GEAR_BAND 0x154 + +#define QPHY_V2_PCS_UFS_READY_STATUS 0x168 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h index ba1ea29d2884..adea13c3a9e6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v3.h @@ -6,12 +6,15 @@ #ifndef QCOM_PHY_QMP_PCS_UFS_V3_H_ #define QCOM_PHY_QMP_PCS_UFS_V3_H_ +#define QPHY_V3_PCS_UFS_PHY_START 0x000 +#define QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL 0x004 #define QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x02c #define QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x034 #define QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL 0x134 #define QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME 0x138 #define QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1 0x13c #define QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2 0x140 +#define QPHY_V3_PCS_UFS_READY_STATUS 0x160 #define QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1 0x1bc #define QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1 0x1c4 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h index bcca23493b7e..07959964fcf6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h @@ -8,11 +8,15 @@ #define QCOM_PHY_QMP_PCS_UFS_V5_H_ /* Only for QMP V5 PHY - UFS PCS registers */ +#define QPHY_V5_PCS_UFS_PHY_START 0x000 +#define QPHY_V5_PCS_UFS_POWER_DOWN_CONTROL 0x004 +#define QPHY_V5_PCS_UFS_SW_RESET 0x008 #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c #define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010 #define QPHY_V5_PCS_UFS_PLL_CNTL 0x02c #define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030 #define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038 +#define QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 #define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 #define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0b4 #define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL 0x124 @@ -21,6 +25,7 @@ #define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2 0x158 #define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND 0x160 #define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND 0x168 +#define QPHY_V5_PCS_UFS_READY_STATUS 0x180 #define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1 0x1d8 #define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1 0x1e0 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h new file mode 100644 index 000000000000..c23d5e41e25b --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_UFS_V6_H_ +#define QCOM_PHY_QMP_PCS_UFS_V6_H_ + +/* Only for QMP V6 PHY - UFS PCS registers */ +#define QPHY_V6_PCS_UFS_PHY_START 0x000 +#define QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL 0x004 +#define QPHY_V6_PCS_UFS_SW_RESET 0x008 +#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c +#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010 +#define QPHY_V6_PCS_UFS_PLL_CNTL 0x02c +#define QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030 +#define QPHY_V6_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038 +#define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 +#define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 +#define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc +#define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158 +#define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c +#define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184 +#define QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2 0x18c +#define QPHY_V6_PCS_UFS_TX_PWM_GEAR_BAND 0x178 +#define QPHY_V6_PCS_UFS_TX_HS_GEAR_BAND 0x174 +#define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8 +#define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4 +#define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h new file mode 100644 index 000000000000..9510e63ba9d8 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2022, The Linux Foundation. All rights reserved. + */ + +#ifndef QCOM_PHY_QMP_PCS_USB_V6_H_ +#define QCOM_PHY_QMP_PCS_USB_V6_H_ + +/* Only for QMP V6 PHY - USB3 have different offsets than V5 */ +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1 0xc4 +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2 0xc8 +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8 +#define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc +#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90 +#define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190 +#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194 +#define QPHY_USB_V6_PCS_CDR_RESET_TIME 0x1b0 +#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1 0x1c0 +#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2 0x1c4 +#define QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG 0x1d0 +#define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc +#define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec + +#define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18 +#define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c +#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40 +#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h index c8515f506872..bf36399d0057 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h @@ -7,13 +7,11 @@ #define QCOM_PHY_QMP_PCS_V2_H_ /* Only for QMP V2 PHY - PCS registers */ +#define QPHY_V2_PCS_SW_RESET 0x000 #define QPHY_V2_PCS_POWER_DOWN_CONTROL 0x004 +#define QPHY_V2_PCS_START_CONTROL 0x008 #define QPHY_V2_PCS_TXDEEMPH_M6DB_V0 0x024 #define QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0 0x028 -#define QPHY_V2_PCS_TX_LARGE_AMP_DRV_LVL 0x034 -#define QPHY_V2_PCS_TX_LARGE_AMP_POST_EMP_LVL 0x038 -#define QPHY_V2_PCS_TX_SMALL_AMP_DRV_LVL 0x03c -#define QPHY_V2_PCS_TX_SMALL_AMP_POST_EMP_LVL 0x040 #define QPHY_V2_PCS_ENDPOINT_REFCLK_DRIVE 0x054 #define QPHY_V2_PCS_RX_IDLE_DTCT_CNTRL 0x058 #define QPHY_V2_PCS_POWER_STATE_CONFIG1 0x060 @@ -30,17 +28,16 @@ #define QPHY_V2_PCS_FLL_CNT_VAL_L 0x0c8 #define QPHY_V2_PCS_FLL_CNT_VAL_H_TOL 0x0cc #define QPHY_V2_PCS_FLL_MAN_CODE 0x0d0 - -/* UFS only ? */ -#define QPHY_V2_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP 0x0cc -#define QPHY_V2_PCS_RX_SYM_RESYNC_CTRL 0x13c -#define QPHY_V2_PCS_RX_MIN_HIBERN8_TIME 0x140 -#define QPHY_V2_PCS_RX_SIGDET_CTRL2 0x148 -#define QPHY_V2_PCS_RX_PWM_GEAR_BAND 0x154 +#define QPHY_V2_PCS_AUTONOMOUS_MODE_CTRL 0x0d4 +#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_CLEAR 0x0d8 +#define QPHY_V2_PCS_LFPS_RXTERM_IRQ_STATUS 0x178 +#define QPHY_V2_PCS_USB_PCS_STATUS 0x17c /* USB */ #define QPHY_V2_PCS_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1a8 #define QPHY_V2_PCS_OSC_DTCT_ACTIONS 0x1ac #define QPHY_V2_PCS_RX_SIGDET_LVL 0x1d8 #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc #define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0 +#define QPHY_V2_PCS_PCI_PCS_STATUS 0x174 /* PCI */ + #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h index 04f260711ea1..36cc80bb9059 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h @@ -7,6 +7,10 @@ #define QCOM_PHY_QMP_PCS_V5_H_ /* Only for QMP V5 PHY - USB/PCIe PCS registers */ +#define QPHY_V5_PCS_SW_RESET 0x000 +#define QPHY_V5_PCS_PCS_STATUS1 0x014 +#define QPHY_V5_PCS_POWER_DOWN_CONTROL 0x040 +#define QPHY_V5_PCS_START_CONTROL 0x044 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG1 0x0c4 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG2 0x0c8 #define QPHY_V5_PCS_LOCK_DETECT_CONFIG3 0x0cc diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h new file mode 100644 index 000000000000..18c4a3abe590 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_V6_H_ +#define QCOM_PHY_QMP_PCS_V6_H_ + +/* Only for QMP V6 PHY - USB/PCIe PCS registers */ +#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc +#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188 +#define QPHY_V6_PCS_RATE_SLEW_CNTRL1 0x198 +#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0 +#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h new file mode 100644 index 000000000000..9c3f1e4950e6 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_PCS_V6_20_H_ +#define QCOM_PHY_QMP_PCS_V6_20_H_ + +/* Only for QMP V6_20 PHY - USB/PCIe PCS registers */ +#define QPHY_V6_20_PCS_G3S2_PRE_GAIN 0x178 +#define QPHY_V6_20_PCS_RX_SIGDET_LVL 0x190 +#define QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL 0x1b8 +#define QPHY_V6_20_PCS_TX_RX_CONFIG1 0x1dc +#define QPHY_V6_20_PCS_TX_RX_CONFIG2 0x1e0 +#define QPHY_V6_20_PCS_EQ_CONFIG4 0x1f8 +#define QPHY_V6_20_PCS_EQ_CONFIG5 0x1fc + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h new file mode 100644 index 000000000000..f420f8faf16a --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_COM_V6_H_ +#define QCOM_PHY_QMP_QSERDES_COM_V6_H_ + +/* Only for QMP V6 PHY - QSERDES COM registers */ + +#define QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1 0x00 +#define QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1 0x04 +#define QSERDES_V6_COM_CP_CTRL_MODE1 0x10 +#define QSERDES_V6_COM_PLL_RCTRL_MODE1 0x14 +#define QSERDES_V6_COM_PLL_CCTRL_MODE1 0x18 +#define QSERDES_V6_COM_CORECLK_DIV_MODE1 0x1c +#define QSERDES_V6_COM_LOCK_CMP1_MODE1 0x20 +#define QSERDES_V6_COM_LOCK_CMP2_MODE1 0x24 +#define QSERDES_V6_COM_DEC_START_MODE1 0x28 +#define QSERDES_V6_COM_DEC_START_MSB_MODE1 0x2c +#define QSERDES_V6_COM_DIV_FRAC_START1_MODE1 0x30 +#define QSERDES_V6_COM_DIV_FRAC_START2_MODE1 0x34 +#define QSERDES_V6_COM_DIV_FRAC_START3_MODE1 0x38 +#define QSERDES_V6_COM_HSCLK_SEL_1 0x3c +#define QSERDES_V6_COM_VCO_TUNE1_MODE1 0x48 +#define QSERDES_V6_COM_VCO_TUNE2_MODE1 0x4c +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x50 +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x54 +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x58 +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x5c +#define QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0 0x60 +#define QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0 0x64 +#define QSERDES_V6_COM_CP_CTRL_MODE0 0x70 +#define QSERDES_V6_COM_PLL_RCTRL_MODE0 0x74 +#define QSERDES_V6_COM_PLL_CCTRL_MODE0 0x78 +#define QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0 0x7c +#define QSERDES_V6_COM_LOCK_CMP1_MODE0 0x80 +#define QSERDES_V6_COM_LOCK_CMP2_MODE0 0x84 +#define QSERDES_V6_COM_DEC_START_MODE0 0x88 +#define QSERDES_V6_COM_DEC_START_MSB_MODE0 0x8c +#define QSERDES_V6_COM_DIV_FRAC_START1_MODE0 0x90 +#define QSERDES_V6_COM_DIV_FRAC_START2_MODE0 0x94 +#define QSERDES_V6_COM_DIV_FRAC_START3_MODE0 0x98 +#define QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1 0x9c +#define QSERDES_V6_COM_INTEGLOOP_GAIN0_MODE0 0xa0 +#define QSERDES_V6_COM_INTEGLOOP_GAIN1_MODE0 0xa4 +#define QSERDES_V6_COM_VCO_TUNE1_MODE0 0xa8 +#define QSERDES_V6_COM_VCO_TUNE2_MODE0 0xac +#define QSERDES_V6_COM_BG_TIMER 0xbc +#define QSERDES_V6_COM_SSC_EN_CENTER 0xc0 +#define QSERDES_V6_COM_SSC_PER1 0xcc +#define QSERDES_V6_COM_SSC_PER2 0xd0 +#define QSERDES_V6_COM_PLL_POST_DIV_MUX 0xd8 +#define QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN 0xdc +#define QSERDES_V6_COM_CLK_ENABLE1 0xe0 +#define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4 +#define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8 +#define QSERDES_V6_COM_PLL_IVCO 0xf4 +#define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110 +#define QSERDES_V6_COM_RESETSM_CNTRL 0x118 +#define QSERDES_V6_COM_LOCK_CMP_EN 0x120 +#define QSERDES_V6_COM_LOCK_CMP_CFG 0x124 +#define QSERDES_V6_COM_VCO_TUNE_CTRL 0x13c +#define QSERDES_V6_COM_VCO_TUNE_MAP 0x140 +#define QSERDES_V6_COM_VCO_TUNE_INITVAL2 0x148 +#define QSERDES_V6_COM_CLK_SELECT 0x164 +#define QSERDES_V6_COM_CORE_CLK_EN 0x170 +#define QSERDES_V6_COM_CMN_CONFIG_1 0x174 +#define QSERDES_V6_COM_SVS_MODE_CLK_SEL 0x17c +#define QSERDES_V6_COM_CMN_MISC_1 0x184 +#define QSERDES_V6_COM_CMN_MODE 0x188 +#define QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL 0x198 +#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1 0x1a4 +#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2 0x1a8 +#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3 0x1ac +#define QSERDES_V6_COM_ADDITIONAL_MISC 0x1b4 +#define QSERDES_V6_COM_ADDITIONAL_MISC_2 0x1b8 +#define QSERDES_V6_COM_ADDITIONAL_MISC_3 0x1bc +#define QSERDES_V6_COM_CMN_STATUS 0x1d0 +#define QSERDES_V6_COM_C_READY_STATUS 0x1f8 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h index fbaf6ef467f8..7fa5363feeb9 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com.h @@ -135,6 +135,6 @@ #define QSERDES_COM_CMN_MISC2 0x1b8 #define QSERDES_COM_CORECLK_DIV_MODE1 0x1bc #define QSERDES_COM_CORECLK_DIV_MODE2 0x1c0 -#define QSERDES_COM_CMN_RSVD5 0x1c0 +#define QSERDES_COM_CMN_RSVD5 0x1c4 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h new file mode 100644 index 000000000000..86d7d796d5d7 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ + +#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0 +#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0 +#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c +#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h new file mode 100644 index 000000000000..15bcb4ba9139 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_ + +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_TX 0x28 +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30 +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34 + +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214 +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6 0x220 +#define QSERDES_UFS_V6_RX_MODE_RATE2_B3 0x238 +#define QSERDES_UFS_V6_RX_MODE_RATE2_B6 0x244 +#define QSERDES_UFS_V6_RX_MODE_RATE3_B3 0x25c +#define QSERDES_UFS_V6_RX_MODE_RATE3_B4 0x260 +#define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264 +#define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_5nm.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_5nm.h index a1c088bd5158..a4a4e251348d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_5nm.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v5_5nm.h @@ -7,11 +7,6 @@ #define QCOM_PHY_QMP_QSERDES_TXRX_V5_5NM_H_ /* Only for QMP V5 5NM PHY - TX registers */ -#define QSERDES_V5_5NM_TX_RES_CODE_LANE_OFFSET_TX 0x30 -#define QSERDES_V5_5NM_TX_RES_CODE_LANE_OFFSET_RX 0x34 -#define QSERDES_V5_5NM_TX_LANE_MODE_1 0x78 -#define QSERDES_V5_5NM_TX_LANE_MODE_2 0x7c -#define QSERDES_V5_5NM_TX_LANE_MODE_3 0x80 #define QSERDES_V5_5NM_TX_BIST_MODE_LANENO 0x00 #define QSERDES_V5_5NM_TX_BIST_INVERT 0x04 #define QSERDES_V5_5NM_TX_CLKBUF_ENABLE 0x08 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h new file mode 100644 index 000000000000..a69233e68f9a --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_ + +#define QSERDES_V6_TX_CLKBUF_ENABLE 0x08 +#define QSERDES_V6_TX_RESET_TSYNC_EN 0x1c +#define QSERDES_V6_TX_PRE_STALL_LDO_BOOST_EN 0x20 +#define QSERDES_V6_TX_TX_BAND 0x24 +#define QSERDES_V6_TX_INTERFACE_SELECT 0x2c +#define QSERDES_V6_TX_RES_CODE_LANE_TX 0x34 +#define QSERDES_V6_TX_RES_CODE_LANE_RX 0x38 +#define QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX 0x3c +#define QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX 0x40 +#define QSERDES_V6_TX_PARRATE_REC_DETECT_IDLE_EN 0x60 +#define QSERDES_V6_TX_BIST_PATTERN7 0x7c +#define QSERDES_V6_TX_LANE_MODE_1 0x84 +#define QSERDES_V6_TX_LANE_MODE_3 0x8c +#define QSERDES_V6_TX_LANE_MODE_4 0x90 +#define QSERDES_V6_TX_LANE_MODE_5 0x94 +#define QSERDES_V6_TX_RCV_DETECT_LVL_2 0xa4 +#define QSERDES_V6_TX_TRAN_DRVR_EMP_EN 0xc0 +#define QSERDES_V6_TX_TX_INTERFACE_MODE 0xc4 +#define QSERDES_V6_TX_VMODE_CTRL1 0xc8 +#define QSERDES_V6_TX_PI_QEC_CTRL 0xe4 + +#define QSERDES_V6_RX_UCDR_FO_GAIN 0x08 +#define QSERDES_V6_RX_UCDR_SO_GAIN 0x14 +#define QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN 0x30 +#define QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE 0x34 +#define QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW 0x3c +#define QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH 0x40 +#define QSERDES_V6_RX_UCDR_PI_CONTROLS 0x44 +#define QSERDES_V6_RX_UCDR_SB2_THRESH1 0x4c +#define QSERDES_V6_RX_UCDR_SB2_THRESH2 0x50 +#define QSERDES_V6_RX_UCDR_SB2_GAIN1 0x54 +#define QSERDES_V6_RX_UCDR_SB2_GAIN2 0x58 +#define QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE 0x60 +#define QSERDES_V6_RX_TX_ADAPT_POST_THRESH 0xcc +#define QSERDES_V6_RX_VGA_CAL_CNTRL1 0xd4 +#define QSERDES_V6_RX_VGA_CAL_CNTRL2 0xd8 +#define QSERDES_V6_RX_GM_CAL 0xdc +#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2 0xec +#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3 0xf0 +#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4 0xf4 +#define QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW 0xf8 +#define QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH 0xfc +#define QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110 +#define QSERDES_V6_RX_SIDGET_ENABLES 0x118 +#define QSERDES_V6_RX_SIGDET_CNTRL 0x11c +#define QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL 0x124 +#define QSERDES_V6_RX_RX_MODE_00_LOW 0x15c +#define QSERDES_V6_RX_RX_MODE_00_HIGH 0x160 +#define QSERDES_V6_RX_RX_MODE_00_HIGH2 0x164 +#define QSERDES_V6_RX_RX_MODE_00_HIGH3 0x168 +#define QSERDES_V6_RX_RX_MODE_00_HIGH4 0x16c +#define QSERDES_V6_RX_RX_MODE_01_LOW 0x170 +#define QSERDES_V6_RX_RX_MODE_01_HIGH 0x174 +#define QSERDES_V6_RX_RX_MODE_01_HIGH2 0x178 +#define QSERDES_V6_RX_RX_MODE_01_HIGH3 0x17c +#define QSERDES_V6_RX_RX_MODE_01_HIGH4 0x180 +#define QSERDES_V6_RX_RX_MODE_10_LOW 0x184 +#define QSERDES_V6_RX_RX_MODE_10_HIGH 0x188 +#define QSERDES_V6_RX_RX_MODE_10_HIGH2 0x18c +#define QSERDES_V6_RX_RX_MODE_10_HIGH3 0x190 +#define QSERDES_V6_RX_RX_MODE_10_HIGH4 0x194 +#define QSERDES_V6_RX_DFE_EN_TIMER 0x1a0 +#define QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4 +#define QSERDES_V6_RX_DCC_CTRL1 0x1a8 +#define QSERDES_V6_RX_VTH_CODE 0x1b0 +#define QSERDES_V6_RX_SIGDET_CAL_CTRL1 0x1e4 +#define QSERDES_V6_RX_SIGDET_CAL_TRIM 0x1f8 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h new file mode 100644 index 000000000000..5385a8b60970 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_ +#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_ + +#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30 +#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34 +#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac +#define QSERDES_V6_20_TX_LANE_MODE_1 0x78 +#define QSERDES_V6_20_TX_LANE_MODE_2 0x7c +#define QSERDES_V6_20_TX_LANE_MODE_3 0x80 + +#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08 +#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c +#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20 +#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34 +#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c +#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0 +#define QSERDES_V6_20_RX_DFE_3 0xb4 +#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8 +#define QSERDES_V6_20_RX_GM_CAL 0x10c +#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4 0x120 +#define QSERDES_V6_20_RX_SIGDET_ENABLES 0x148 +#define QSERDES_V6_20_RX_PHPRE_CTRL 0x188 +#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x194 +#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc +#define QSERDES_V6_20_RX_MODE_RATE2_B0 0x1f4 +#define QSERDES_V6_20_RX_MODE_RATE2_B1 0x1f8 +#define QSERDES_V6_20_RX_MODE_RATE2_B2 0x1fc +#define QSERDES_V6_20_RX_MODE_RATE2_B3 0x200 +#define QSERDES_V6_20_RX_MODE_RATE2_B4 0x204 +#define QSERDES_V6_20_RX_MODE_RATE2_B5 0x208 +#define QSERDES_V6_20_RX_MODE_RATE2_B6 0x20c +#define QSERDES_V6_20_RX_MODE_RATE3_B0 0x210 +#define QSERDES_V6_20_RX_MODE_RATE3_B1 0x214 +#define QSERDES_V6_20_RX_MODE_RATE3_B2 0x218 +#define QSERDES_V6_20_RX_MODE_RATE3_B3 0x21c +#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220 +#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224 +#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 318eea35b972..994ddd5d4a81 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -20,7 +20,15 @@ #include <linux/reset.h> #include <linux/slab.h> +#include <ufs/unipro.h> #include "phy-qcom-qmp.h" +#include "phy-qcom-qmp-pcs-ufs-v2.h" +#include "phy-qcom-qmp-pcs-ufs-v3.h" +#include "phy-qcom-qmp-pcs-ufs-v4.h" +#include "phy-qcom-qmp-pcs-ufs-v5.h" +#include "phy-qcom-qmp-pcs-ufs-v6.h" + +#include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) @@ -69,32 +77,40 @@ enum qphy_reg_layout { QPHY_LAYOUT_SIZE }; -static const unsigned int msm8996_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_START_CTRL] = 0x00, - [QPHY_PCS_READY_STATUS] = 0x168, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, -}; - -static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_START_CTRL] = 0x00, - [QPHY_PCS_READY_STATUS] = 0x160, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, +static const unsigned int ufsphy_v2_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_START_CTRL] = QPHY_V2_PCS_UFS_PHY_START, + [QPHY_PCS_READY_STATUS] = QPHY_V2_PCS_UFS_READY_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_UFS_POWER_DOWN_CONTROL, }; -static const unsigned int sm6115_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_START_CTRL] = 0x00, - [QPHY_PCS_READY_STATUS] = 0x168, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, +static const unsigned int ufsphy_v3_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_START_CTRL] = QPHY_V3_PCS_UFS_PHY_START, + [QPHY_PCS_READY_STATUS] = QPHY_V3_PCS_UFS_READY_STATUS, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_UFS_POWER_DOWN_CONTROL, }; -static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = { +static const unsigned int ufsphy_v4_regs_layout[QPHY_LAYOUT_SIZE] = { [QPHY_START_CTRL] = QPHY_V4_PCS_UFS_PHY_START, [QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_UFS_READY_STATUS, [QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET, [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL, }; -static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = { +static const unsigned int ufsphy_v5_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_START_CTRL] = QPHY_V5_PCS_UFS_PHY_START, + [QPHY_PCS_READY_STATUS] = QPHY_V5_PCS_UFS_READY_STATUS, + [QPHY_SW_RESET] = QPHY_V5_PCS_UFS_SW_RESET, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_UFS_POWER_DOWN_CONTROL, +}; + +static const unsigned int ufsphy_v6_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_START_CTRL] = QPHY_V6_PCS_UFS_PHY_START, + [QPHY_PCS_READY_STATUS] = QPHY_V6_PCS_UFS_READY_STATUS, + [QPHY_SW_RESET] = QPHY_V6_PCS_UFS_SW_RESET, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL, +}; + +static const struct qmp_phy_init_tbl msm8996_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e), QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xd7), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), @@ -143,12 +159,12 @@ static const struct qmp_phy_init_tbl msm8996_ufs_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE1, 0x00), }; -static const struct qmp_phy_init_tbl msm8996_ufs_tx_tbl[] = { +static const struct qmp_phy_init_tbl msm8996_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x02), }; -static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = { +static const struct qmp_phy_init_tbl msm8996_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24), QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x02), QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x00), @@ -162,7 +178,7 @@ static const struct qmp_phy_init_tbl msm8996_ufs_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E), }; -static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = { +static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x0e), QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14), QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), @@ -213,17 +229,18 @@ static const struct qmp_phy_init_tbl sm6115_ufsphy_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL1, 0xff), QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00), +}; - /* Rate B */ +static const struct qmp_phy_init_tbl sm6115_ufsphy_hs_b_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x44), }; -static const struct qmp_phy_init_tbl sm6115_ufsphy_tx_tbl[] = { +static const struct qmp_phy_init_tbl sm6115_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45), QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06), }; -static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = { +static const struct qmp_phy_init_tbl sm6115_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_LVL, 0x24), QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x0F), QMP_PHY_INIT_CFG(QSERDES_RX_RX_INTERFACE_MODE, 0x40), @@ -241,19 +258,19 @@ static const struct qmp_phy_init_tbl sm6115_ufsphy_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5B), }; -static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs_tbl[] = { - QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_PWM_GEAR_BAND, 0x15), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_SIGDET_CTRL2, 0x6d), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_TX_LARGE_AMP_DRV_LVL, 0x0f), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_TX_SMALL_AMP_DRV_LVL, 0x02), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_SYM_RESYNC_CTRL, 0x03), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_TX_LARGE_AMP_POST_EMP_LVL, 0x12), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_TX_SMALL_AMP_POST_EMP_LVL, 0x0f), - QMP_PHY_INIT_CFG(QPHY_V2_PCS_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */ +static const struct qmp_phy_init_tbl sm6115_ufsphy_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_RX_PWM_GEAR_BAND, 0x15), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_RX_SIGDET_CTRL2, 0x6d), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_RX_MIN_STALL_NOCONFIG_TIME_CAP, 0x28), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_TX_LARGE_AMP_POST_EMP_LVL, 0x12), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_TX_SMALL_AMP_POST_EMP_LVL, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V2_PCS_UFS_RX_MIN_HIBERN8_TIME, 0x9a), /* 8 us */ }; -static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = { +static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02), QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04), QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a), @@ -290,18 +307,19 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32), QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f), +}; - /* Rate B */ +static const struct qmp_phy_init_tbl sdm845_ufsphy_hs_b_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44), }; -static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = { +static const struct qmp_phy_init_tbl sdm845_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06), QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x04), QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX, 0x07), }; -static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { +static const struct qmp_phy_init_tbl sdm845_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24), QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), @@ -320,7 +338,7 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59), }; -static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = { +static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6e), QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a), QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02), @@ -331,7 +349,7 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02), }; -static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = { +static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11), QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_HS_SWITCH_SEL, 0x00), @@ -356,12 +374,13 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd), QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23), +}; - /* Rate B */ +static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_b_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x06), }; -static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = { +static const struct qmp_phy_init_tbl sm8150_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06), QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03), QMP_PHY_INIT_CFG(QSERDES_V4_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01), @@ -370,7 +389,11 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0c), }; -static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = { +static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_tx[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x75), +}; + +static const struct qmp_phy_init_tbl sm8150_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_LVL, 0x24), QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), @@ -405,10 +428,28 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH2, 0xc8), QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH3, 0x3b), QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_10_HIGH4, 0xb1), +}; +static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x6c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c), }; -static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = { +static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2, 0x6d), QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a), QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02), @@ -418,7 +459,40 @@ static const struct qmp_phy_init_tbl sm8150_ufsphy_pcs_tbl[] = { QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_MULTI_LANE_CTRL1, 0x02), }; -static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = { +static const struct qmp_phy_init_tbl sm8150_ufsphy_hs_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x10), + QMP_PHY_INIT_CFG(QPHY_V4_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a), +}; + +static const struct qmp_phy_init_tbl sm8250_ufsphy_hs_g4_tx[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xe5), +}; + +static const struct qmp_phy_init_tbl sm8250_ufsphy_hs_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5a), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CTRL2, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_TERM_BW, 0x6f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL1, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x09), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x07), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_MEASURE_TIME, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x3f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xff), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x2c), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0x6d), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0x6d), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0xed), + QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0x3c), +}; + +static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_SEL, 0x11), QMP_PHY_INIT_CFG(QSERDES_V5_COM_HSCLK_HS_SWITCH_SEL, 0x00), @@ -443,12 +517,13 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_serdes_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_LOCK_CMP2_MODE1, 0x1e), QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xdd), QMP_PHY_INIT_CFG(QSERDES_V5_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23), +}; - /* Rate B */ +static const struct qmp_phy_init_tbl sm8350_ufsphy_hs_b_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V5_COM_VCO_TUNE_MAP, 0x06), }; -static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = { +static const struct qmp_phy_init_tbl sm8350_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06), QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03), QMP_PHY_INIT_CFG(QSERDES_V5_TX_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01), @@ -460,7 +535,7 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_tx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_TX_TRAN_DRVR_EMP_EN, 0x0c), }; -static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = { +static const struct qmp_phy_init_tbl sm8350_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_LVL, 0x24), QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_CNTRL, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V5_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), @@ -500,24 +575,100 @@ static const struct qmp_phy_init_tbl sm8350_ufsphy_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V5_RX_DCC_CTRL1, 0x0c), }; -static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs_tbl[] = { +static const struct qmp_phy_init_tbl sm8350_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2, 0x6d), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0a), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL, 0x1f), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xff), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_PLL_CNTL, 0x03), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB, 0x16), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB, 0xd8), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND, 0xaa), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND, 0x06), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x03), - QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x03), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1, 0x0e), QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1, 0x02), }; +static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_tx[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_TX_LANE_MODE_1, 0xe5), +}; + +static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_V5_RX_UCDR_PI_CTRL2, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_TERM_BW, 0x6f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_MEASURE_TIME, 0x20), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_LOW, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_IDAC_TSETTLE_HIGH, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_LOW, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH, 0xbf), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH2, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH3, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_00_HIGH4, 0x2d), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_LOW, 0x6d), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH, 0x6d), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH2, 0xed), + QMP_PHY_INIT_CFG(QSERDES_V5_RX_RX_MODE_01_HIGH4, 0x3c), +}; + +static const struct qmp_phy_init_tbl sm8350_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V5_PCS_UFS_BIST_FIXED_PAT_CTRL, 0x0a), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_SYSCLK_EN_SEL, 0xd9), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_CONFIG_1, 0x16), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x4c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x99), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_TX_LANE_MODE_1, 0x05), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), + + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3, 0x1a), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6, 0x60), + + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B3, 0x9e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE2_B6, 0x60), + + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B3, 0x9e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B4, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B5, 0x36), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +}; + struct qmp_ufs_offsets { u16 serdes; u16 pcs; @@ -527,21 +678,30 @@ struct qmp_ufs_offsets { u16 rx2; }; +struct qmp_phy_cfg_tbls { + /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ + const struct qmp_phy_init_tbl *serdes; + int serdes_num; + const struct qmp_phy_init_tbl *tx; + int tx_num; + const struct qmp_phy_init_tbl *rx; + int rx_num; + const struct qmp_phy_init_tbl *pcs; + int pcs_num; +}; + /* struct qmp_phy_cfg - per-PHY initialization config */ struct qmp_phy_cfg { int lanes; const struct qmp_ufs_offsets *offsets; - /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ - const struct qmp_phy_init_tbl *serdes_tbl; - int serdes_tbl_num; - const struct qmp_phy_init_tbl *tx_tbl; - int tx_tbl_num; - const struct qmp_phy_init_tbl *rx_tbl; - int rx_tbl_num; - const struct qmp_phy_init_tbl *pcs_tbl; - int pcs_tbl_num; + /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */ + const struct qmp_phy_cfg_tbls tbls; + /* Additional sequence for HS Series B */ + const struct qmp_phy_cfg_tbls tbls_hs_b; + /* Additional sequence for HS G4 */ + const struct qmp_phy_cfg_tbls tbls_hs_g4; /* clock ids to be requested */ const char * const *clk_list; @@ -575,6 +735,8 @@ struct qmp_ufs { struct reset_control *ufs_reset; struct phy *phy; + u32 mode; + u32 submode; }; static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val) @@ -620,7 +782,7 @@ static const char * const qmp_phy_vreg_l[] = { "vdda-phy", "vdda-pll", }; -static const struct qmp_ufs_offsets qmp_ufs_offsets_v5 = { +static const struct qmp_ufs_offsets qmp_ufs_offsets = { .serdes = 0, .pcs = 0xc00, .tx = 0x400, @@ -629,15 +791,26 @@ static const struct qmp_ufs_offsets qmp_ufs_offsets_v5 = { .rx2 = 0xa00, }; -static const struct qmp_phy_cfg msm8996_ufs_cfg = { +static const struct qmp_ufs_offsets qmp_ufs_offsets_v6 = { + .serdes = 0, + .pcs = 0x0400, + .tx = 0x1000, + .rx = 0x1200, + .tx2 = 0x1800, + .rx2 = 0x1a00, +}; + +static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes = 1, - .serdes_tbl = msm8996_ufs_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(msm8996_ufs_serdes_tbl), - .tx_tbl = msm8996_ufs_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(msm8996_ufs_tx_tbl), - .rx_tbl = msm8996_ufs_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(msm8996_ufs_rx_tbl), + .tbls = { + .serdes = msm8996_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(msm8996_ufsphy_serdes), + .tx = msm8996_ufsphy_tx, + .tx_num = ARRAY_SIZE(msm8996_ufsphy_tx), + .rx = msm8996_ufsphy_rx, + .rx_num = ARRAY_SIZE(msm8996_ufsphy_rx), + }, .clk_list = msm8996_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(msm8996_ufs_phy_clk_l), @@ -645,7 +818,7 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = { .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = msm8996_ufsphy_regs_layout, + .regs = ufsphy_v2_regs_layout, .no_pcs_sw_reset = true, }; @@ -653,39 +826,59 @@ static const struct qmp_phy_cfg msm8996_ufs_cfg = { static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, - .offsets = &qmp_ufs_offsets_v5, - - .serdes_tbl = sm8350_ufsphy_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl), - .tx_tbl = sm8350_ufsphy_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl), - .rx_tbl = sm8350_ufsphy_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl), - .pcs_tbl = sm8350_ufsphy_pcs_tbl, - .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl), + .offsets = &qmp_ufs_offsets, + + .tbls = { + .serdes = sm8350_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes), + .tx = sm8350_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx), + .rx = sm8350_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx), + .pcs = sm8350_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8350_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), + }, + .tbls_hs_g4 = { + .tx = sm8350_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), + .rx = sm8350_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), + .pcs = sm8350_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8150_ufsphy_regs_layout, + .regs = ufsphy_v5_regs_layout, }; static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes = 2, - .serdes_tbl = sdm845_ufsphy_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl), - .tx_tbl = sdm845_ufsphy_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl), - .rx_tbl = sdm845_ufsphy_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl), - .pcs_tbl = sdm845_ufsphy_pcs_tbl, - .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl), + .tbls = { + .serdes = sdm845_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sdm845_ufsphy_serdes), + .tx = sdm845_ufsphy_tx, + .tx_num = ARRAY_SIZE(sdm845_ufsphy_tx), + .rx = sdm845_ufsphy_rx, + .rx_num = ARRAY_SIZE(sdm845_ufsphy_rx), + .pcs = sdm845_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sdm845_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sdm845_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sdm845_ufsphy_regs_layout, + .regs = ufsphy_v3_regs_layout, .no_pcs_sw_reset = true, }; @@ -693,19 +886,27 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .lanes = 1, - .serdes_tbl = sm6115_ufsphy_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(sm6115_ufsphy_serdes_tbl), - .tx_tbl = sm6115_ufsphy_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_tx_tbl), - .rx_tbl = sm6115_ufsphy_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(sm6115_ufsphy_rx_tbl), - .pcs_tbl = sm6115_ufsphy_pcs_tbl, - .pcs_tbl_num = ARRAY_SIZE(sm6115_ufsphy_pcs_tbl), + .offsets = &qmp_ufs_offsets, + + .tbls = { + .serdes = sm6115_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm6115_ufsphy_serdes), + .tx = sm6115_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm6115_ufsphy_tx), + .rx = sm6115_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm6115_ufsphy_rx), + .pcs = sm6115_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm6115_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm6115_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm6115_ufsphy_hs_b_serdes), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm6115_ufsphy_regs_layout, + .regs = ufsphy_v2_regs_layout, .no_pcs_sw_reset = true, }; @@ -713,55 +914,151 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, - .serdes_tbl = sm8150_ufsphy_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(sm8150_ufsphy_serdes_tbl), - .tx_tbl = sm8150_ufsphy_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_tx_tbl), - .rx_tbl = sm8150_ufsphy_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(sm8150_ufsphy_rx_tbl), - .pcs_tbl = sm8150_ufsphy_pcs_tbl, - .pcs_tbl_num = ARRAY_SIZE(sm8150_ufsphy_pcs_tbl), + .tbls = { + .serdes = sm8150_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8150_ufsphy_serdes), + .tx = sm8150_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8150_ufsphy_tx), + .rx = sm8150_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8150_ufsphy_rx), + .pcs = sm8150_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8150_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8150_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), + }, + .tbls_hs_g4 = { + .tx = sm8150_ufsphy_hs_g4_tx, + .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx), + .rx = sm8150_ufsphy_hs_g4_rx, + .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx), + .pcs = sm8150_ufsphy_hs_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + }, + .clk_list = sdm845_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v4_regs_layout, +}; + +static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { + .lanes = 2, + + .tbls = { + .serdes = sm8150_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8150_ufsphy_serdes), + .tx = sm8150_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8150_ufsphy_tx), + .rx = sm8150_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8150_ufsphy_rx), + .pcs = sm8150_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8150_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8150_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), + }, + .tbls_hs_g4 = { + .tx = sm8250_ufsphy_hs_g4_tx, + .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), + .rx = sm8250_ufsphy_hs_g4_rx, + .rx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx), + .pcs = sm8150_ufsphy_hs_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8150_ufsphy_regs_layout, + .regs = ufsphy_v4_regs_layout, }; static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes = 2, - .serdes_tbl = sm8350_ufsphy_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl), - .tx_tbl = sm8350_ufsphy_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl), - .rx_tbl = sm8350_ufsphy_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl), - .pcs_tbl = sm8350_ufsphy_pcs_tbl, - .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl), + .tbls = { + .serdes = sm8350_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes), + .tx = sm8350_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx), + .rx = sm8350_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx), + .pcs = sm8350_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8350_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), + }, + .tbls_hs_g4 = { + .tx = sm8350_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), + .rx = sm8350_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), + .pcs = sm8350_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8150_ufsphy_regs_layout, + .regs = ufsphy_v5_regs_layout, }; static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes = 2, - .serdes_tbl = sm8350_ufsphy_serdes_tbl, - .serdes_tbl_num = ARRAY_SIZE(sm8350_ufsphy_serdes_tbl), - .tx_tbl = sm8350_ufsphy_tx_tbl, - .tx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_tx_tbl), - .rx_tbl = sm8350_ufsphy_rx_tbl, - .rx_tbl_num = ARRAY_SIZE(sm8350_ufsphy_rx_tbl), - .pcs_tbl = sm8350_ufsphy_pcs_tbl, - .pcs_tbl_num = ARRAY_SIZE(sm8350_ufsphy_pcs_tbl), + .tbls = { + .serdes = sm8350_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_serdes), + .tx = sm8350_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_tx), + .rx = sm8350_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_rx), + .pcs = sm8350_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sm8350_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), + }, + .tbls_hs_g4 = { + .tx = sm8350_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), + .rx = sm8350_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), + .pcs = sm8350_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = sm8150_ufsphy_regs_layout, + .regs = ufsphy_v5_regs_layout, +}; + +static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { + .lanes = 2, + + .offsets = &qmp_ufs_offsets_v6, + + .tbls = { + .serdes = sm8550_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_serdes), + .tx = sm8550_ufsphy_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_tx), + .rx = sm8550_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_rx), + .pcs = sm8550_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_pcs), + }, + .clk_list = sdm845_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v6_regs_layout, }; static void qmp_ufs_configure_lane(void __iomem *base, @@ -790,16 +1087,46 @@ static void qmp_ufs_configure(void __iomem *base, qmp_ufs_configure_lane(base, tbl, num, 0xff); } -static int qmp_ufs_serdes_init(struct qmp_ufs *qmp) +static void qmp_ufs_serdes_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls *tbls) { - const struct qmp_phy_cfg *cfg = qmp->cfg; void __iomem *serdes = qmp->serdes; - const struct qmp_phy_init_tbl *serdes_tbl = cfg->serdes_tbl; - int serdes_tbl_num = cfg->serdes_tbl_num; - qmp_ufs_configure(serdes, serdes_tbl, serdes_tbl_num); + qmp_ufs_configure(serdes, tbls->serdes, tbls->serdes_num); +} - return 0; +static void qmp_ufs_lanes_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls *tbls) +{ + const struct qmp_phy_cfg *cfg = qmp->cfg; + void __iomem *tx = qmp->tx; + void __iomem *rx = qmp->rx; + + qmp_ufs_configure_lane(tx, tbls->tx, tbls->tx_num, 1); + qmp_ufs_configure_lane(rx, tbls->rx, tbls->rx_num, 1); + + if (cfg->lanes >= 2) { + qmp_ufs_configure_lane(qmp->tx2, tbls->tx, tbls->tx_num, 2); + qmp_ufs_configure_lane(qmp->rx2, tbls->rx, tbls->rx_num, 2); + } +} + +static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls *tbls) +{ + void __iomem *pcs = qmp->pcs; + + qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num); +} + +static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +{ + qmp_ufs_serdes_init(qmp, &cfg->tbls); + if (qmp->mode == PHY_MODE_UFS_HS_B) + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); + qmp_ufs_lanes_init(qmp, &cfg->tbls); + if (qmp->submode == UFS_HS_G4) + qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4); + qmp_ufs_pcs_init(qmp, &cfg->tbls); + if (qmp->submode == UFS_HS_G4) + qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4); } static int qmp_ufs_com_init(struct qmp_ufs *qmp) @@ -886,25 +1213,12 @@ static int qmp_ufs_power_on(struct phy *phy) { struct qmp_ufs *qmp = phy_get_drvdata(phy); const struct qmp_phy_cfg *cfg = qmp->cfg; - void __iomem *tx = qmp->tx; - void __iomem *rx = qmp->rx; void __iomem *pcs = qmp->pcs; void __iomem *status; unsigned int val; int ret; - qmp_ufs_serdes_init(qmp); - - /* Tx, Rx, and PCS configurations */ - qmp_ufs_configure_lane(tx, cfg->tx_tbl, cfg->tx_tbl_num, 1); - qmp_ufs_configure_lane(rx, cfg->rx_tbl, cfg->rx_tbl_num, 1); - - if (cfg->lanes >= 2) { - qmp_ufs_configure_lane(qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2); - qmp_ufs_configure_lane(qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2); - } - - qmp_ufs_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); + qmp_ufs_init_registers(qmp, cfg); ret = reset_control_deassert(qmp->ufs_reset); if (ret) @@ -981,9 +1295,20 @@ static int qmp_ufs_disable(struct phy *phy) return qmp_ufs_exit(phy); } +static int qmp_ufs_set_mode(struct phy *phy, enum phy_mode mode, int submode) +{ + struct qmp_ufs *qmp = phy_get_drvdata(phy); + + qmp->mode = mode; + qmp->submode = submode; + + return 0; +} + static const struct phy_ops qcom_qmp_ufs_phy_ops = { .power_on = qmp_ufs_enable, .power_off = qmp_ufs_disable, + .set_mode = qmp_ufs_set_mode, .owner = THIS_MODULE, }; @@ -1021,6 +1346,59 @@ static int qmp_ufs_clk_init(struct qmp_ufs *qmp) return devm_clk_bulk_get(dev, num, qmp->clks); } +static void qmp_ufs_clk_release_provider(void *res) +{ + of_clk_del_provider(res); +} + +#define UFS_SYMBOL_CLOCKS 3 + +static int qmp_ufs_register_clocks(struct qmp_ufs *qmp, struct device_node *np) +{ + struct clk_hw_onecell_data *clk_data; + struct clk_hw *hw; + char name[64]; + int ret; + + clk_data = devm_kzalloc(qmp->dev, + struct_size(clk_data, hws, UFS_SYMBOL_CLOCKS), + GFP_KERNEL); + if (!clk_data) + return -ENOMEM; + + clk_data->num = UFS_SYMBOL_CLOCKS; + + snprintf(name, sizeof(name), "%s::rx_symbol_0", dev_name(qmp->dev)); + hw = devm_clk_hw_register_fixed_rate(qmp->dev, name, NULL, 0, 0); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + clk_data->hws[0] = hw; + + snprintf(name, sizeof(name), "%s::rx_symbol_1", dev_name(qmp->dev)); + hw = devm_clk_hw_register_fixed_rate(qmp->dev, name, NULL, 0, 0); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + clk_data->hws[1] = hw; + + snprintf(name, sizeof(name), "%s::tx_symbol_0", dev_name(qmp->dev)); + hw = devm_clk_hw_register_fixed_rate(qmp->dev, name, NULL, 0, 0); + if (IS_ERR(hw)) + return PTR_ERR(hw); + + clk_data->hws[2] = hw; + + ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data); + if (ret) + return ret; + + /* + * Roll a devm action because the clock provider can be a child node. + */ + return devm_add_action_or_reset(qmp->dev, qmp_ufs_clk_release_provider, np); +} + static int qmp_ufs_parse_dt_legacy(struct qmp_ufs *qmp, struct device_node *np) { struct platform_device *pdev = to_platform_device(qmp->dev); @@ -1133,6 +1511,10 @@ static int qmp_ufs_probe(struct platform_device *pdev) if (ret) goto err_node_put; + ret = qmp_ufs_register_clocks(qmp, np); + if (ret) + goto err_node_put; + qmp->phy = devm_phy_create(dev, np, &qcom_qmp_ufs_phy_ops); if (IS_ERR(qmp->phy)) { ret = PTR_ERR(qmp->phy); @@ -1156,7 +1538,7 @@ err_node_put: static const struct of_device_id qmp_ufs_of_match_table[] = { { .compatible = "qcom,msm8996-qmp-ufs-phy", - .data = &msm8996_ufs_cfg, + .data = &msm8996_ufsphy_cfg, }, { .compatible = "qcom,msm8998-qmp-ufs-phy", .data = &sdm845_ufsphy_cfg, @@ -1173,6 +1555,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { .compatible = "qcom,sm6115-qmp-ufs-phy", .data = &sm6115_ufsphy_cfg, }, { + .compatible = "qcom,sm6125-qmp-ufs-phy", + .data = &sm6115_ufsphy_cfg, + }, { .compatible = "qcom,sm6350-qmp-ufs-phy", .data = &sdm845_ufsphy_cfg, }, { @@ -1180,13 +1565,16 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { .data = &sm8150_ufsphy_cfg, }, { .compatible = "qcom,sm8250-qmp-ufs-phy", - .data = &sm8150_ufsphy_cfg, + .data = &sm8250_ufsphy_cfg, }, { .compatible = "qcom,sm8350-qmp-ufs-phy", .data = &sm8350_ufsphy_cfg, }, { .compatible = "qcom,sm8450-qmp-ufs-phy", .data = &sm8450_ufsphy_cfg, + }, { + .compatible = "qcom,sm8550-qmp-ufs-phy", + .data = &sm8550_ufsphy_cfg, }, { }, }; diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 4aa338fc4643..a49711c5a63d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -21,6 +21,9 @@ #include <linux/slab.h> #include "phy-qcom-qmp.h" +#include "phy-qcom-qmp-pcs-misc-v3.h" +#include "phy-qcom-qmp-pcs-usb-v4.h" +#include "phy-qcom-qmp-pcs-usb-v5.h" /* QPHY_SW_RESET bit */ #define SW_RESET BIT(0) @@ -54,9 +57,6 @@ /* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */ #define IRQ_CLEAR BIT(0) -/* QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register bits */ -#define RCVR_DETECT BIT(0) - /* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */ #define CLAMP_EN BIT(0) /* enables i/o clamp_n */ @@ -94,53 +94,49 @@ enum qphy_reg_layout { QPHY_PCS_STATUS, QPHY_PCS_AUTONOMOUS_MODE_CTRL, QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR, - QPHY_PCS_LFPS_RXTERM_IRQ_STATUS, QPHY_PCS_POWER_DOWN_CONTROL, - /* PCS_MISC registers */ - QPHY_PCS_MISC_TYPEC_CTRL, /* Keep last to ensure regs_layout arrays are properly initialized */ QPHY_LAYOUT_SIZE }; -static const unsigned int usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x17c, - [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d4, - [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0d8, - [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x178, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, +static const unsigned int qmp_v2_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V2_PCS_USB_PCS_STATUS, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V2_PCS_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V2_PCS_LFPS_RXTERM_IRQ_CLEAR, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_POWER_DOWN_CONTROL, }; static const unsigned int qmp_v3_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x0d8, - [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x0dc, - [QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, + [QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL, }; static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_START_CTRL] = 0x44, - [QPHY_PCS_STATUS] = 0x14, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40, + [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL, /* In PCS_USB */ - [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x008, - [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014, + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR, }; -static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { - [QPHY_SW_RESET] = 0x00, - [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04, - [QPHY_START_CTRL] = 0x08, - [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0xd8, - [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0xdc, - [QPHY_PCS_STATUS] = 0x174, - [QPHY_PCS_MISC_TYPEC_CTRL] = 0x00, +static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = { + [QPHY_SW_RESET] = QPHY_V5_PCS_SW_RESET, + [QPHY_START_CTRL] = QPHY_V5_PCS_START_CONTROL, + [QPHY_PCS_STATUS] = QPHY_V5_PCS_PCS_STATUS1, + [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V5_PCS_POWER_DOWN_CONTROL, + + /* In PCS_USB */ + [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL, + [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR, }; static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = { @@ -1265,7 +1261,7 @@ static const struct qmp_phy_init_tbl qcm2290_usb3_tx_tbl[] = { static const struct qmp_phy_init_tbl qcm2290_usb3_rx_tbl[] = { QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), - QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x00), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00), QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a), @@ -1607,7 +1603,7 @@ static const struct qmp_phy_cfg msm8996_usb3phy_cfg = { .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = usb3phy_regs_layout, + .regs = qmp_v2_usb3phy_regs_layout, }; static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { @@ -1675,7 +1671,7 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = { .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = qmp_v4_usb3phy_regs_layout, + .regs = qmp_v5_usb3phy_regs_layout, }; static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { @@ -1866,7 +1862,7 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = qmp_v4_usb3phy_regs_layout, + .regs = qmp_v5_usb3phy_regs_layout, .pcs_usb_offset = 0x1000, .has_pwrdn_delay = true, @@ -1891,7 +1887,7 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = qmp_v4_usb3phy_regs_layout, + .regs = qmp_v5_usb3phy_regs_layout, .pcs_usb_offset = 0x300, .has_pwrdn_delay = true, @@ -1917,7 +1913,7 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = qmp_v4_usb3phy_regs_layout, + .regs = qmp_v5_usb3phy_regs_layout, .pcs_usb_offset = 0x1000, .has_pwrdn_delay = true, @@ -1940,7 +1936,7 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { .num_resets = ARRAY_SIZE(qcm2290_usb3phy_reset_l), .vreg_list = qmp_phy_vreg_l, .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), - .regs = qcm2290_usb3phy_regs_layout, + .regs = qmp_v3_usb3phy_regs_layout, }; static void qmp_usb_configure_lane(void __iomem *base, @@ -2623,6 +2619,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = { .compatible = "qcom,sdx65-qmp-usb3-uni-phy", .data = &sdx65_usb3_uniphy_cfg, }, { + .compatible = "qcom,sm6115-qmp-usb3-phy", + .data = &qcm2290_usb3phy_cfg, + }, { .compatible = "qcom,sm8150-qmp-usb3-phy", .data = &sm8150_usb3phy_cfg, }, { diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index 29a48f0436d2..7ee4b0e07d11 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -21,31 +21,28 @@ #include "phy-qcom-qmp-qserdes-txrx-v5_20.h" #include "phy-qcom-qmp-qserdes-txrx-v5_5nm.h" +#include "phy-qcom-qmp-qserdes-com-v6.h" +#include "phy-qcom-qmp-qserdes-txrx-v6.h" +#include "phy-qcom-qmp-qserdes-txrx-v6_20.h" +#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h" + #include "phy-qcom-qmp-qserdes-pll.h" #include "phy-qcom-qmp-pcs-v2.h" #include "phy-qcom-qmp-pcs-v3.h" -#include "phy-qcom-qmp-pcs-misc-v3.h" -#include "phy-qcom-qmp-pcs-ufs-v3.h" #include "phy-qcom-qmp-pcs-v4.h" -#include "phy-qcom-qmp-pcs-pcie-v4.h" -#include "phy-qcom-qmp-pcs-usb-v4.h" -#include "phy-qcom-qmp-pcs-ufs-v4.h" #include "phy-qcom-qmp-pcs-v4_20.h" -#include "phy-qcom-qmp-pcs-pcie-v4_20.h" #include "phy-qcom-qmp-pcs-v5.h" + #include "phy-qcom-qmp-pcs-v5_20.h" -#include "phy-qcom-qmp-pcs-pcie-v5.h" -#include "phy-qcom-qmp-pcs-usb-v5.h" -#include "phy-qcom-qmp-pcs-ufs-v5.h" -#include "phy-qcom-qmp-pcs-pcie-v5_20.h" +#include "phy-qcom-qmp-pcs-v6.h" -#include "phy-qcom-qmp-pcie-qhp.h" +#include "phy-qcom-qmp-pcs-v6_20.h" /* Only for QMP V3 & V4 PHY - DP COM registers */ #define QPHY_V3_DP_COM_PHY_MODE_CTRL 0x00 @@ -137,4 +134,8 @@ #define QPHY_V4_PCS_MISC_TYPEC_STATUS 0x10 #define QPHY_V4_PCS_MISC_PLACEHOLDER_STATUS 0x14 +/* Only for QMP V6 PHY - DP PHY registers */ +#define QSERDES_V6_DP_PHY_AUX_INTERRUPT_STATUS 0x0e0 +#define QSERDES_V6_DP_PHY_STATUS 0x0e4 + #endif diff --git a/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c b/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c new file mode 100644 index 000000000000..eeaa1eb0e24b --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-snps-eusb2.c @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> + +#define USB_PHY_UTMI_CTRL0 (0x3c) +#define SLEEPM BIT(0) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NONDRIVING BIT(3) + +#define USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define PHY_ENABLE BIT(0) +#define SIDDQ_SEL BIT(1) +#define SIDDQ BIT(2) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(6, 4) +#define FSEL_19_2_MHZ_VAL (0x0) +#define FSEL_38_4_MHZ_VAL (0x4) + +#define USB_PHY_CFG_CTRL_1 (0x58) +#define PHY_CFG_PLL_CPBIAS_CNTRL_MASK GENMASK(7, 1) + +#define USB_PHY_CFG_CTRL_2 (0x5c) +#define PHY_CFG_PLL_FB_DIV_7_0_MASK GENMASK(7, 0) +#define DIV_7_0_19_2_MHZ_VAL (0x90) +#define DIV_7_0_38_4_MHZ_VAL (0xc8) + +#define USB_PHY_CFG_CTRL_3 (0x60) +#define PHY_CFG_PLL_FB_DIV_11_8_MASK GENMASK(3, 0) +#define DIV_11_8_19_2_MHZ_VAL (0x1) +#define DIV_11_8_38_4_MHZ_VAL (0x0) + +#define PHY_CFG_PLL_REF_DIV GENMASK(7, 4) +#define PLL_REF_DIV_VAL (0x0) + +#define USB_PHY_HS_PHY_CTRL2 (0x64) +#define VBUSVLDEXT0 BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) +#define VBUS_DET_EXT_SEL BIT(4) + +#define USB_PHY_CFG_CTRL_4 (0x68) +#define PHY_CFG_PLL_GMP_CNTRL_MASK GENMASK(1, 0) +#define PHY_CFG_PLL_INT_CNTRL_MASK GENMASK(7, 2) + +#define USB_PHY_CFG_CTRL_5 (0x6c) +#define PHY_CFG_PLL_PROP_CNTRL_MASK GENMASK(4, 0) +#define PHY_CFG_PLL_VREF_TUNE_MASK GENMASK(7, 6) + +#define USB_PHY_CFG_CTRL_6 (0x70) +#define PHY_CFG_PLL_VCO_CNTRL_MASK GENMASK(2, 0) + +#define USB_PHY_CFG_CTRL_7 (0x74) + +#define USB_PHY_CFG_CTRL_8 (0x78) +#define PHY_CFG_TX_FSLS_VREF_TUNE_MASK GENMASK(1, 0) +#define PHY_CFG_TX_FSLS_VREG_BYPASS BIT(2) +#define PHY_CFG_TX_HS_VREF_TUNE_MASK GENMASK(5, 3) +#define PHY_CFG_TX_HS_XV_TUNE_MASK GENMASK(7, 6) + +#define USB_PHY_CFG_CTRL_9 (0x7c) +#define PHY_CFG_TX_PREEMP_TUNE_MASK GENMASK(2, 0) +#define PHY_CFG_TX_RES_TUNE_MASK GENMASK(4, 3) +#define PHY_CFG_TX_RISE_TUNE_MASK GENMASK(6, 5) +#define PHY_CFG_RCAL_BYPASS BIT(7) + +#define USB_PHY_CFG_CTRL_10 (0x80) + +#define USB_PHY_CFG0 (0x94) +#define DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define CMN_CTRL_OVERRIDE_EN BIT(1) + +#define UTMI_PHY_CMN_CTRL0 (0x98) +#define TESTBURNIN BIT(6) + +#define USB_PHY_FSEL_SEL (0xb8) +#define FSEL_SEL BIT(0) + +#define USB_PHY_APB_ACCESS_CMD (0x130) +#define RW_ACCESS BIT(0) +#define APB_START_CMD BIT(1) +#define APB_LOGIC_RESET BIT(2) + +#define USB_PHY_APB_ACCESS_STATUS (0x134) +#define ACCESS_DONE BIT(0) +#define TIMED_OUT BIT(1) +#define ACCESS_ERROR BIT(2) +#define ACCESS_IN_PROGRESS BIT(3) + +#define USB_PHY_APB_ADDRESS (0x138) +#define APB_REG_ADDR_MASK GENMASK(7, 0) + +#define USB_PHY_APB_WRDATA_LSB (0x13c) +#define APB_REG_WRDATA_7_0_MASK GENMASK(3, 0) + +#define USB_PHY_APB_WRDATA_MSB (0x140) +#define APB_REG_WRDATA_15_8_MASK GENMASK(7, 4) + +#define USB_PHY_APB_RDDATA_LSB (0x144) +#define APB_REG_RDDATA_7_0_MASK GENMASK(3, 0) + +#define USB_PHY_APB_RDDATA_MSB (0x148) +#define APB_REG_RDDATA_15_8_MASK GENMASK(7, 4) + +static const char * const eusb2_hsphy_vreg_names[] = { + "vdd", "vdda12", +}; + +#define EUSB2_NUM_VREGS ARRAY_SIZE(eusb2_hsphy_vreg_names) + +struct qcom_snps_eusb2_hsphy { + struct phy *phy; + void __iomem *base; + + struct clk *ref_clk; + struct reset_control *phy_reset; + + struct regulator_bulk_data vregs[EUSB2_NUM_VREGS]; + + enum phy_mode mode; + + struct phy *repeater; +}; + +static int qcom_snps_eusb2_hsphy_set_mode(struct phy *p, enum phy_mode mode, int submode) +{ + struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); + + phy->mode = mode; + + return phy_set_mode_ext(phy->repeater, mode, submode); +} + +static void qcom_snps_eusb2_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl_relaxed(base + offset); + reg &= ~mask; + reg |= val & mask; + writel_relaxed(reg, base + offset); + + /* Ensure above write is completed */ + readl_relaxed(base + offset); +} + +static void qcom_eusb2_default_parameters(struct qcom_snps_eusb2_hsphy *phy) +{ + /* default parameters: tx pre-emphasis */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_PREEMP_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_PREEMP_TUNE_MASK, 0)); + + /* tx rise/fall time */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_RISE_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_RISE_TUNE_MASK, 0x2)); + + /* source impedance adjustment */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_9, + PHY_CFG_TX_RES_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_RES_TUNE_MASK, 0x1)); + + /* dc voltage level adjustement */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, + PHY_CFG_TX_HS_VREF_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_HS_VREF_TUNE_MASK, 0x3)); + + /* transmitter HS crossover adjustement */ + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_8, + PHY_CFG_TX_HS_XV_TUNE_MASK, + FIELD_PREP(PHY_CFG_TX_HS_XV_TUNE_MASK, 0x0)); +} + +static int qcom_eusb2_ref_clk_init(struct qcom_snps_eusb2_hsphy *phy) +{ + unsigned long ref_clk_freq = clk_get_rate(phy->ref_clk); + + switch (ref_clk_freq) { + case 19200000: + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, + FIELD_PREP(FSEL_MASK, FSEL_19_2_MHZ_VAL)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, + PHY_CFG_PLL_FB_DIV_7_0_MASK, + DIV_7_0_19_2_MHZ_VAL); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_FB_DIV_11_8_MASK, + DIV_11_8_19_2_MHZ_VAL); + break; + + case 38400000: + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, + FIELD_PREP(FSEL_MASK, FSEL_38_4_MHZ_VAL)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_2, + PHY_CFG_PLL_FB_DIV_7_0_MASK, + DIV_7_0_38_4_MHZ_VAL); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_FB_DIV_11_8_MASK, + DIV_11_8_38_4_MHZ_VAL); + break; + + default: + dev_err(&phy->phy->dev, "unsupported ref_clk_freq:%lu\n", ref_clk_freq); + return -EINVAL; + } + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_3, + PHY_CFG_PLL_REF_DIV, PLL_REF_DIV_VAL); + + return 0; +} + +static int qcom_snps_eusb2_hsphy_init(struct phy *p) +{ + struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(phy->vregs), phy->vregs); + if (ret) + return ret; + + ret = phy_init(phy->repeater); + if (ret) { + dev_err(&p->dev, "repeater init failed. %d\n", ret); + goto disable_vreg; + } + + ret = clk_prepare_enable(phy->ref_clk); + if (ret) { + dev_err(&p->dev, "failed to enable ref clock, %d\n", ret); + goto disable_vreg; + } + + ret = reset_control_assert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + usleep_range(100, 150); + + ret = reset_control_deassert(phy->phy_reset); + if (ret) { + dev_err(&p->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ref_clk; + } + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG0, + CMN_CTRL_OVERRIDE_EN, CMN_CTRL_OVERRIDE_EN); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, POR); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + PHY_ENABLE | RETENABLEN, PHY_ENABLE | RETENABLEN); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_APB_ACCESS_CMD, + APB_LOGIC_RESET, APB_LOGIC_RESET); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, UTMI_PHY_CMN_CTRL0, TESTBURNIN, 0); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_FSEL_SEL, + FSEL_SEL, FSEL_SEL); + + /* update ref_clk related registers */ + ret = qcom_eusb2_ref_clk_init(phy); + if (ret) + goto disable_ref_clk; + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_1, + PHY_CFG_PLL_CPBIAS_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_CPBIAS_CNTRL_MASK, 0x1)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, + PHY_CFG_PLL_INT_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_INT_CNTRL_MASK, 0x8)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_4, + PHY_CFG_PLL_GMP_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_GMP_CNTRL_MASK, 0x1)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, + PHY_CFG_PLL_PROP_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_PROP_CNTRL_MASK, 0x10)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_6, + PHY_CFG_PLL_VCO_CNTRL_MASK, + FIELD_PREP(PHY_CFG_PLL_VCO_CNTRL_MASK, 0x0)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_CFG_CTRL_5, + PHY_CFG_PLL_VREF_TUNE_MASK, + FIELD_PREP(PHY_CFG_PLL_VREF_TUNE_MASK, 0x1)); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, + VBUS_DET_EXT_SEL, VBUS_DET_EXT_SEL); + + /* set default parameters */ + qcom_eusb2_default_parameters(phy); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + SIDDQ_SEL, SIDDQ_SEL); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL_COMMON0, + SIDDQ, 0); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_UTMI_CTRL5, POR, 0); + + qcom_snps_eusb2_hsphy_write_mask(phy->base, USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + return 0; + +disable_ref_clk: + clk_disable_unprepare(phy->ref_clk); + +disable_vreg: + regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); + + return ret; +} + +static int qcom_snps_eusb2_hsphy_exit(struct phy *p) +{ + struct qcom_snps_eusb2_hsphy *phy = phy_get_drvdata(p); + + clk_disable_unprepare(phy->ref_clk); + + regulator_bulk_disable(ARRAY_SIZE(phy->vregs), phy->vregs); + + phy_exit(phy->repeater); + + return 0; +} + +static const struct phy_ops qcom_snps_eusb2_hsphy_ops = { + .init = qcom_snps_eusb2_hsphy_init, + .exit = qcom_snps_eusb2_hsphy_exit, + .set_mode = qcom_snps_eusb2_hsphy_set_mode, + .owner = THIS_MODULE, +}; + +static int qcom_snps_eusb2_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct qcom_snps_eusb2_hsphy *phy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + int ret, i; + int num; + + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); + if (!phy) + return -ENOMEM; + + phy->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(phy->base)) + return PTR_ERR(phy->base); + + phy->phy_reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(phy->phy_reset)) + return PTR_ERR(phy->phy_reset); + + phy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(phy->ref_clk)) + return dev_err_probe(dev, PTR_ERR(phy->ref_clk), + "failed to get ref clk\n"); + + num = ARRAY_SIZE(phy->vregs); + for (i = 0; i < num; i++) + phy->vregs[i].supply = eusb2_hsphy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, phy->vregs); + if (ret) + return dev_err_probe(dev, ret, + "failed to get regulator supplies\n"); + + phy->repeater = devm_of_phy_get_by_index(dev, np, 0); + if (IS_ERR(phy->repeater)) + return dev_err_probe(dev, PTR_ERR(phy->repeater), + "failed to get repeater\n"); + + generic_phy = devm_phy_create(dev, NULL, &qcom_snps_eusb2_hsphy_ops); + if (IS_ERR(generic_phy)) { + dev_err(dev, "failed to create phy %d\n", ret); + return PTR_ERR(generic_phy); + } + + dev_set_drvdata(dev, phy); + phy_set_drvdata(generic_phy, phy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "Registered Qcom-eUSB2 phy\n"); + + return 0; +} + +static const struct of_device_id qcom_snps_eusb2_hsphy_of_match_table[] = { + { .compatible = "qcom,sm8550-snps-eusb2-phy", }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_snps_eusb2_hsphy_of_match_table); + +static struct platform_driver qcom_snps_eusb2_hsphy_driver = { + .probe = qcom_snps_eusb2_hsphy_probe, + .driver = { + .name = "qcom-snps-eusb2-hsphy", + .of_match_table = qcom_snps_eusb2_hsphy_of_match_table, + }, +}; + +module_platform_driver(qcom_snps_eusb2_hsphy_driver); +MODULE_DESCRIPTION("Qualcomm SNPS eUSB2 HS PHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/phy/renesas/r8a779f0-ether-serdes.c b/drivers/phy/renesas/r8a779f0-ether-serdes.c index e7588a940d69..c5206ef9195b 100644 --- a/drivers/phy/renesas/r8a779f0-ether-serdes.c +++ b/drivers/phy/renesas/r8a779f0-ether-serdes.c @@ -18,7 +18,6 @@ #define R8A779F0_ETH_SERDES_BANK_SELECT 0x03fc #define R8A779F0_ETH_SERDES_TIMEOUT_US 100000 #define R8A779F0_ETH_SERDES_NUM_RETRY_LINKUP 3 -#define R8A779F0_ETH_SERDES_NUM_RETRY_INIT 3 struct r8a779f0_eth_serdes_drv_data; struct r8a779f0_eth_serdes_channel { @@ -242,51 +241,46 @@ static int r8a779f0_eth_serdes_hw_init(struct r8a779f0_eth_serdes_channel *chann if (ret) return ret; - ret = r8a779f0_eth_serdes_reg_wait(&dd->channel[0], 0x0000, 0x380, BIT(15), 0); + return r8a779f0_eth_serdes_reg_wait(&dd->channel[0], 0x0000, 0x380, BIT(15), 0); +} + +static int r8a779f0_eth_serdes_init(struct phy *p) +{ + struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p); + int ret; + + ret = r8a779f0_eth_serdes_hw_init(channel); + if (!ret) + channel->dd->initialized = true; + + return ret; +} + +static int r8a779f0_eth_serdes_hw_init_late(struct r8a779f0_eth_serdes_channel +*channel) +{ + int ret; + + ret = r8a779f0_eth_serdes_chan_setting(channel); if (ret) return ret; - for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) { - ret = r8a779f0_eth_serdes_chan_setting(&dd->channel[i]); - if (ret) - return ret; - } - - for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) { - ret = r8a779f0_eth_serdes_chan_speed(&dd->channel[i]); - if (ret) - return ret; - } + ret = r8a779f0_eth_serdes_chan_speed(channel); + if (ret) + return ret; - for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) - r8a779f0_eth_serdes_write32(dd->channel[i].addr, 0x03c0, 0x380, 0x0000); - for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) - r8a779f0_eth_serdes_write32(dd->channel[i].addr, 0x03d0, 0x380, 0x0000); + r8a779f0_eth_serdes_write32(channel->addr, 0x03c0, 0x380, 0x0000); - for (i = 0; i < R8A779F0_ETH_SERDES_NUM; i++) { - ret = r8a779f0_eth_serdes_monitor_linkup(&dd->channel[i]); - if (ret) - return ret; - } + r8a779f0_eth_serdes_write32(channel->addr, 0x03d0, 0x380, 0x0000); - return 0; + return r8a779f0_eth_serdes_monitor_linkup(channel); } -static int r8a779f0_eth_serdes_init(struct phy *p) +static int r8a779f0_eth_serdes_power_on(struct phy *p) { struct r8a779f0_eth_serdes_channel *channel = phy_get_drvdata(p); - int i, ret; - for (i = 0; i < R8A779F0_ETH_SERDES_NUM_RETRY_INIT; i++) { - ret = r8a779f0_eth_serdes_hw_init(channel); - if (!ret) { - channel->dd->initialized = true; - break; - } - usleep_range(1000, 2000); - } - - return ret; + return r8a779f0_eth_serdes_hw_init_late(channel); } static int r8a779f0_eth_serdes_set_mode(struct phy *p, enum phy_mode mode, @@ -319,6 +313,7 @@ static int r8a779f0_eth_serdes_set_speed(struct phy *p, int speed) static const struct phy_ops r8a779f0_eth_serdes_ops = { .init = r8a779f0_eth_serdes_init, + .power_on = r8a779f0_eth_serdes_power_on, .set_mode = r8a779f0_eth_serdes_set_mode, .set_speed = r8a779f0_eth_serdes_set_speed, }; diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index d76440ae10ff..39db8acde61a 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -808,9 +808,8 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) struct extcon_dev *edev = tcphy->extcon; union extcon_property_value property; unsigned int id; - bool ufp, dp; u8 mode; - int ret; + int ret, ufp, dp; if (!edev) return MODE_DFP_USB; @@ -821,10 +820,10 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) mode = MODE_DFP_USB; id = EXTCON_USB_HOST; - if (ufp) { + if (ufp > 0) { mode = MODE_UFP_USB; id = EXTCON_USB; - } else if (dp) { + } else if (dp > 0) { mode = MODE_DFP_DP; id = EXTCON_DISP_DP; diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index 3707a0b5c1ae..78045bd6c214 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -718,6 +718,22 @@ static int tegra_xusb_setup_usb_role_switch(struct tegra_xusb_port *port) return err; } +static void tegra_xusb_parse_usb_role_default_mode(struct tegra_xusb_port *port) +{ + enum usb_role role = USB_ROLE_NONE; + enum usb_dr_mode mode = usb_get_role_switch_default_mode(&port->dev); + + if (mode == USB_DR_MODE_HOST) + role = USB_ROLE_HOST; + else if (mode == USB_DR_MODE_PERIPHERAL) + role = USB_ROLE_DEVICE; + + if (role != USB_ROLE_NONE) { + usb_role_switch_set_role(port->usb_role_sw, role); + dev_dbg(&port->dev, "usb role default mode is %s", modes[mode]); + } +} + static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2) { struct tegra_xusb_port *port = &usb2->base; @@ -747,6 +763,7 @@ static int tegra_xusb_usb2_port_parse_dt(struct tegra_xusb_usb2_port *usb2) err = tegra_xusb_setup_usb_role_switch(port); if (err < 0) return err; + tegra_xusb_parse_usb_role_default_mode(port); } else { dev_err(&port->dev, "usb-role-switch not found for %s mode", modes[usb2->mode]); diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c index ddce5ef7711c..1b83c98a78f0 100644 --- a/drivers/phy/ti/phy-j721e-wiz.c +++ b/drivers/phy/ti/phy-j721e-wiz.c @@ -58,6 +58,14 @@ enum wiz_lane_standard_mode { LANE_MODE_GEN4, }; +/* + * List of master lanes used for lane swapping + */ +enum wiz_typec_master_lane { + LANE0 = 0, + LANE2 = 2, +}; + enum wiz_refclk_mux_sel { PLL0_REFCLK, PLL1_REFCLK, @@ -194,6 +202,9 @@ static const struct reg_field p_mac_div_sel1[WIZ_MAX_LANES] = { static const struct reg_field typec_ln10_swap = REG_FIELD(WIZ_SERDES_TYPEC, 30, 30); +static const struct reg_field typec_ln23_swap = + REG_FIELD(WIZ_SERDES_TYPEC, 31, 31); + struct wiz_clk_mux { struct clk_hw hw; struct regmap_field *field; @@ -367,6 +378,7 @@ struct wiz { struct regmap_field *mux_sel_field[WIZ_MUX_NUM_CLOCKS]; struct regmap_field *div_sel_field[WIZ_DIV_NUM_CLOCKS_16G]; struct regmap_field *typec_ln10_swap; + struct regmap_field *typec_ln23_swap; struct regmap_field *sup_legacy_clk_override; struct device *dev; @@ -376,6 +388,7 @@ struct wiz { struct gpio_desc *gpio_typec_dir; int typec_dir_delay; u32 lane_phy_type[WIZ_MAX_LANES]; + u32 master_lane_num[WIZ_MAX_LANES]; struct clk *input_clks[WIZ_MAX_INPUT_CLOCKS]; struct clk *output_clks[WIZ_MAX_OUTPUT_CLOCKS]; struct clk_onecell_data clk_data; @@ -675,6 +688,13 @@ static int wiz_regfield_init(struct wiz *wiz) return PTR_ERR(wiz->typec_ln10_swap); } + wiz->typec_ln23_swap = devm_regmap_field_alloc(dev, regmap, + typec_ln23_swap); + if (IS_ERR(wiz->typec_ln23_swap)) { + dev_err(dev, "LN23_SWAP reg field init failed\n"); + return PTR_ERR(wiz->typec_ln23_swap); + } + wiz->phy_en_refclk = devm_regmap_field_alloc(dev, regmap, phy_en_refclk); if (IS_ERR(wiz->phy_en_refclk)) { dev_err(dev, "PHY_EN_REFCLK reg field init failed\n"); @@ -1234,15 +1254,39 @@ static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev, struct wiz *wiz = dev_get_drvdata(dev); int ret; - /* if typec-dir gpio was specified, set LN10 SWAP bit based on that */ - if (id == 0 && wiz->gpio_typec_dir) { - if (wiz->typec_dir_delay) - msleep_interruptible(wiz->typec_dir_delay); - - if (gpiod_get_value_cansleep(wiz->gpio_typec_dir)) - regmap_field_write(wiz->typec_ln10_swap, 1); - else - regmap_field_write(wiz->typec_ln10_swap, 0); + if (id == 0) { + /* if typec-dir gpio was specified, set LN10 SWAP bit based on that */ + if (wiz->gpio_typec_dir) { + if (wiz->typec_dir_delay) + msleep_interruptible(wiz->typec_dir_delay); + + if (gpiod_get_value_cansleep(wiz->gpio_typec_dir)) + regmap_field_write(wiz->typec_ln10_swap, 1); + else + regmap_field_write(wiz->typec_ln10_swap, 0); + } else { + /* if no typec-dir gpio is specified and PHY type is USB3 + * with master lane number is '0' or '2', then set LN10 or + * LN23 SWAP bit to '1' respectively. + */ + u32 num_lanes = wiz->num_lanes; + int i; + + for (i = 0; i < num_lanes; i++) { + if (wiz->lane_phy_type[i] == PHY_TYPE_USB3) { + switch (wiz->master_lane_num[i]) { + case LANE0: + regmap_field_write(wiz->typec_ln10_swap, 1); + break; + case LANE2: + regmap_field_write(wiz->typec_ln23_swap, 1); + break; + default: + break; + } + } + } + } } if (id == 0) { @@ -1386,8 +1430,10 @@ static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz) dev_dbg(dev, "%s: Lanes %u-%u have phy-type %u\n", __func__, reg, reg + num_lanes - 1, phy_type); - for (i = reg; i < reg + num_lanes; i++) + for (i = reg; i < reg + num_lanes; i++) { + wiz->master_lane_num[i] = reg; wiz->lane_phy_type[i] = phy_type; + } } return 0; diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index a333231616f4..47c9f06c3d84 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -80,19 +80,11 @@ static int exynos_ehci_get_phy(struct device *dev, return -EINVAL; } - phy = devm_of_phy_get(dev, child, NULL); + phy = devm_of_phy_optional_get(dev, child, NULL); exynos_ehci->phy[phy_number] = phy; if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret == -EPROBE_DEFER) { - of_node_put(child); - return ret; - } else if (ret != -ENOSYS && ret != -ENODEV) { - dev_err(dev, - "Error retrieving usb2 phy: %d\n", ret); - of_node_put(child); - return ret; - } + of_node_put(child); + return PTR_ERR(phy); } } @@ -108,12 +100,10 @@ static int exynos_ehci_phy_enable(struct device *dev) int ret = 0; for (i = 0; ret == 0 && i < PHY_NUMBER; i++) - if (!IS_ERR(exynos_ehci->phy[i])) - ret = phy_power_on(exynos_ehci->phy[i]); + ret = phy_power_on(exynos_ehci->phy[i]); if (ret) for (i--; i >= 0; i--) - if (!IS_ERR(exynos_ehci->phy[i])) - phy_power_off(exynos_ehci->phy[i]); + phy_power_off(exynos_ehci->phy[i]); return ret; } @@ -125,8 +115,7 @@ static void exynos_ehci_phy_disable(struct device *dev) int i; for (i = 0; i < PHY_NUMBER; i++) - if (!IS_ERR(exynos_ehci->phy[i])) - phy_power_off(exynos_ehci->phy[i]); + phy_power_off(exynos_ehci->phy[i]); } static void exynos_setup_vbus_gpio(struct device *dev) diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 8d7977fd5d3b..8af17c1ee5cc 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -69,19 +69,11 @@ static int exynos_ohci_get_phy(struct device *dev, return -EINVAL; } - phy = devm_of_phy_get(dev, child, NULL); + phy = devm_of_phy_optional_get(dev, child, NULL); exynos_ohci->phy[phy_number] = phy; if (IS_ERR(phy)) { - ret = PTR_ERR(phy); - if (ret == -EPROBE_DEFER) { - of_node_put(child); - return ret; - } else if (ret != -ENOSYS && ret != -ENODEV) { - dev_err(dev, - "Error retrieving usb2 phy: %d\n", ret); - of_node_put(child); - return ret; - } + of_node_put(child); + return PTR_ERR(phy); } } @@ -97,12 +89,10 @@ static int exynos_ohci_phy_enable(struct device *dev) int ret = 0; for (i = 0; ret == 0 && i < PHY_NUMBER; i++) - if (!IS_ERR(exynos_ohci->phy[i])) - ret = phy_power_on(exynos_ohci->phy[i]); + ret = phy_power_on(exynos_ohci->phy[i]); if (ret) for (i--; i >= 0; i--) - if (!IS_ERR(exynos_ohci->phy[i])) - phy_power_off(exynos_ohci->phy[i]); + phy_power_off(exynos_ohci->phy[i]); return ret; } @@ -114,8 +104,7 @@ static void exynos_ohci_phy_disable(struct device *dev) int i; for (i = 0; i < PHY_NUMBER; i++) - if (!IS_ERR(exynos_ohci->phy[i])) - phy_power_off(exynos_ohci->phy[i]); + phy_power_off(exynos_ohci->phy[i]); } static int exynos_ohci_probe(struct platform_device *pdev) diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index b1413757fcc3..3a570bc59fc7 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -250,11 +250,12 @@ static inline void phy_set_bus_width(struct phy *phy, int bus_width) phy->attrs.bus_width = bus_width; } struct phy *phy_get(struct device *dev, const char *string); -struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); struct phy *devm_phy_optional_get(struct device *dev, const char *string); struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, const char *con_id); +struct phy *devm_of_phy_optional_get(struct device *dev, struct device_node *np, + const char *con_id); struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, int index); void of_phy_put(struct phy *phy); @@ -426,12 +427,6 @@ static inline struct phy *phy_get(struct device *dev, const char *string) return ERR_PTR(-ENOSYS); } -static inline struct phy *phy_optional_get(struct device *dev, - const char *string) -{ - return ERR_PTR(-ENOSYS); -} - static inline struct phy *devm_phy_get(struct device *dev, const char *string) { return ERR_PTR(-ENOSYS); @@ -450,6 +445,13 @@ static inline struct phy *devm_of_phy_get(struct device *dev, return ERR_PTR(-ENOSYS); } +static inline struct phy *devm_of_phy_optional_get(struct device *dev, + struct device_node *np, + const char *con_id) +{ + return NULL; +} + static inline struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np, int index) |